From fd236c97b8322d3a93ef93633ed40f4ec5a0d44f Mon Sep 17 00:00:00 2001 From: heck Date: Tue, 5 Sep 2023 12:49:27 +0200 Subject: [PATCH] project structure next iteration --- Drivers/cmsis_armcc.h | 865 - Drivers/cmsis_iccarm.h | 935 - Drivers/core_armv8mbl.h | 1918 -- Drivers/core_armv8mml.h | 2927 --- Drivers/core_cm0.h | 949 - Drivers/core_cm0plus.h | 1083 -- Drivers/core_cm1.h | 976 - Drivers/core_cm23.h | 1993 -- Drivers/core_cm3.h | 1941 -- Drivers/core_cm33.h | 3002 --- Drivers/core_cm7.h | 2671 --- Drivers/core_sc000.h | 1022 -- Drivers/core_sc300.h | 1915 -- Drivers/mpu_armv8.h | 333 - Drivers/tz_context.h | 70 - Makefile | 21 +- Makefile.conf | 10 +- Middlewares/usbd_conf.h | 173 - {Drivers => libs/cmsis}/cmsis_armclang.h | 0 {Drivers => libs/cmsis}/cmsis_compiler.h | 0 {Drivers => libs/cmsis}/cmsis_gcc.h | 0 {Drivers => libs/cmsis}/cmsis_version.h | 0 {Drivers => libs/cmsis}/core_cm4.h | 0 {Drivers => libs/cmsis}/mpu_armv7.h | 0 {Drivers => libs/cmsis}/stm32f407xx.h | 0 {Drivers => libs/cmsis}/stm32f4xx.h | 0 {Drivers => libs/cmsis}/system_stm32f4xx.h | 0 .../hal}/Legacy/stm32_hal_legacy.h | 0 {Drivers => libs/hal}/Makefile | 7 +- {Drivers => libs/hal}/stm32f4xx_hal.c | 1230 +- {Drivers => libs/hal}/stm32f4xx_hal.h | 594 +- {Drivers => libs/hal}/stm32f4xx_hal_conf.h | 0 {Drivers => libs/hal}/stm32f4xx_hal_cortex.c | 1004 +- {Drivers => libs/hal}/stm32f4xx_hal_cortex.h | 814 +- {Drivers => libs/hal}/stm32f4xx_hal_dac.c | 2682 +-- {Drivers => libs/hal}/stm32f4xx_hal_dac.h | 960 +- {Drivers => libs/hal}/stm32f4xx_hal_dac_ex.c | 990 +- {Drivers => libs/hal}/stm32f4xx_hal_dac_ex.h | 410 +- {Drivers => libs/hal}/stm32f4xx_hal_def.h | 420 +- {Drivers => libs/hal}/stm32f4xx_hal_dma.c | 2610 +-- {Drivers => libs/hal}/stm32f4xx_hal_dma.h | 1604 +- {Drivers => libs/hal}/stm32f4xx_hal_dma_ex.c | 626 +- {Drivers => libs/hal}/stm32f4xx_hal_dma_ex.h | 204 +- {Drivers => libs/hal}/stm32f4xx_hal_exti.c | 1094 +- {Drivers => libs/hal}/stm32f4xx_hal_exti.h | 732 +- {Drivers => libs/hal}/stm32f4xx_hal_flash.c | 1550 +- {Drivers => libs/hal}/stm32f4xx_hal_flash.h | 850 +- .../hal}/stm32f4xx_hal_flash_ex.c | 2694 +-- .../hal}/stm32f4xx_hal_flash_ex.h | 2126 +-- .../hal}/stm32f4xx_hal_flash_ramfunc.c | 344 +- .../hal}/stm32f4xx_hal_flash_ramfunc.h | 152 +- {Drivers => libs/hal}/stm32f4xx_hal_gpio.c | 1066 +- {Drivers => libs/hal}/stm32f4xx_hal_gpio.h | 650 +- {Drivers => libs/hal}/stm32f4xx_hal_gpio_ex.h | 3180 ++-- {Drivers => libs/hal}/stm32f4xx_hal_pcd.c | 4774 ++--- {Drivers => libs/hal}/stm32f4xx_hal_pcd.h | 918 +- {Drivers => libs/hal}/stm32f4xx_hal_pcd_ex.c | 682 +- {Drivers => libs/hal}/stm32f4xx_hal_pcd_ex.h | 176 +- {Drivers => libs/hal}/stm32f4xx_hal_pwr.c | 1142 +- {Drivers => libs/hal}/stm32f4xx_hal_pwr.h | 854 +- {Drivers => libs/hal}/stm32f4xx_hal_pwr_ex.c | 1200 +- {Drivers => libs/hal}/stm32f4xx_hal_pwr_ex.h | 680 +- {Drivers => libs/hal}/stm32f4xx_hal_rcc.c | 2244 +-- {Drivers => libs/hal}/stm32f4xx_hal_rcc.h | 2918 +-- {Drivers => libs/hal}/stm32f4xx_hal_rcc_ex.c | 7568 ++++---- {Drivers => libs/hal}/stm32f4xx_hal_rcc_ex.h | 14222 +++++++------- {Drivers => libs/hal}/stm32f4xx_hal_rng.c | 1734 +- {Drivers => libs/hal}/stm32f4xx_hal_rng.h | 722 +- {Drivers => libs/hal}/stm32f4xx_hal_tim.c | 15242 ++++++++-------- {Drivers => libs/hal}/stm32f4xx_hal_tim.h | 4292 ++--- {Drivers => libs/hal}/stm32f4xx_hal_tim_ex.c | 4856 ++--- {Drivers => libs/hal}/stm32f4xx_hal_tim_ex.h | 708 +- {Drivers => libs/hal}/stm32f4xx_ll_bus.h | 4210 ++--- {Drivers => libs/hal}/stm32f4xx_ll_cortex.h | 1274 +- {Drivers => libs/hal}/stm32f4xx_ll_dac.h | 2910 +-- {Drivers => libs/hal}/stm32f4xx_ll_dma.h | 5736 +++--- {Drivers => libs/hal}/stm32f4xx_ll_exti.h | 1908 +- {Drivers => libs/hal}/stm32f4xx_ll_gpio.h | 1962 +- {Drivers => libs/hal}/stm32f4xx_ll_pwr.h | 1970 +- {Drivers => libs/hal}/stm32f4xx_ll_rcc.h | 14192 +++++++------- {Drivers => libs/hal}/stm32f4xx_ll_rng.h | 670 +- {Drivers => libs/hal}/stm32f4xx_ll_system.h | 3422 ++-- {Drivers => libs/hal}/stm32f4xx_ll_tim.h | 8186 ++++----- {Drivers => libs/hal}/stm32f4xx_ll_usb.c | 4448 ++--- {Drivers => libs/hal}/stm32f4xx_ll_usb.h | 1072 +- {Drivers => libs/hal}/stm32f4xx_ll_utils.h | 614 +- {Middlewares => libs/st_usb}/Makefile | 7 +- {Middlewares => libs/st_usb}/usbd_cdc.c | 0 {Middlewares => libs/st_usb}/usbd_cdc.h | 0 libs/st_usb/usbd_conf.h | 70 + {Middlewares => libs/st_usb}/usbd_core.c | 0 {Middlewares => libs/st_usb}/usbd_core.h | 0 {Middlewares => libs/st_usb}/usbd_ctlreq.c | 0 {Middlewares => libs/st_usb}/usbd_ctlreq.h | 0 {Middlewares => libs/st_usb}/usbd_def.h | 0 {Middlewares => libs/st_usb}/usbd_ioreq.c | 0 {Middlewares => libs/st_usb}/usbd_ioreq.h | 0 src/Makefile | 17 +- stm32f4discovery.cfg | 15 - 99 files changed, 73156 insertions(+), 95856 deletions(-) delete mode 100644 Drivers/cmsis_armcc.h delete mode 100644 Drivers/cmsis_iccarm.h delete mode 100644 Drivers/core_armv8mbl.h delete mode 100644 Drivers/core_armv8mml.h delete mode 100644 Drivers/core_cm0.h delete mode 100644 Drivers/core_cm0plus.h delete mode 100644 Drivers/core_cm1.h delete mode 100644 Drivers/core_cm23.h delete mode 100644 Drivers/core_cm3.h delete mode 100644 Drivers/core_cm33.h delete mode 100644 Drivers/core_cm7.h delete mode 100644 Drivers/core_sc000.h delete mode 100644 Drivers/core_sc300.h delete mode 100644 Drivers/mpu_armv8.h delete mode 100644 Drivers/tz_context.h delete mode 100644 Middlewares/usbd_conf.h rename {Drivers => libs/cmsis}/cmsis_armclang.h (100%) rename {Drivers => libs/cmsis}/cmsis_compiler.h (100%) rename {Drivers => libs/cmsis}/cmsis_gcc.h (100%) rename {Drivers => libs/cmsis}/cmsis_version.h (100%) rename {Drivers => libs/cmsis}/core_cm4.h (100%) rename {Drivers => libs/cmsis}/mpu_armv7.h (100%) rename {Drivers => libs/cmsis}/stm32f407xx.h (100%) rename {Drivers => libs/cmsis}/stm32f4xx.h (100%) rename {Drivers => libs/cmsis}/system_stm32f4xx.h (100%) rename {Drivers => libs/hal}/Legacy/stm32_hal_legacy.h (100%) rename {Drivers => libs/hal}/Makefile (77%) rename {Drivers => libs/hal}/stm32f4xx_hal.c (96%) rename {Drivers => libs/hal}/stm32f4xx_hal.h (97%) rename {Drivers => libs/hal}/stm32f4xx_hal_conf.h (100%) rename {Drivers => libs/hal}/stm32f4xx_hal_cortex.c (97%) rename {Drivers => libs/hal}/stm32f4xx_hal_cortex.h (97%) rename {Drivers => libs/hal}/stm32f4xx_hal_dac.c (97%) rename {Drivers => libs/hal}/stm32f4xx_hal_dac.h (97%) rename {Drivers => libs/hal}/stm32f4xx_hal_dac_ex.c (97%) rename {Drivers => libs/hal}/stm32f4xx_hal_dac_ex.h (98%) rename {Drivers => libs/hal}/stm32f4xx_hal_def.h (97%) rename {Drivers => libs/hal}/stm32f4xx_hal_dma.c (96%) rename {Drivers => libs/hal}/stm32f4xx_hal_dma.h (97%) rename {Drivers => libs/hal}/stm32f4xx_hal_dma_ex.c (97%) rename {Drivers => libs/hal}/stm32f4xx_hal_dma_ex.h (96%) rename {Drivers => libs/hal}/stm32f4xx_hal_exti.c (96%) rename {Drivers => libs/hal}/stm32f4xx_hal_exti.h (97%) rename {Drivers => libs/hal}/stm32f4xx_hal_flash.c (96%) rename {Drivers => libs/hal}/stm32f4xx_hal_flash.h (97%) rename {Drivers => libs/hal}/stm32f4xx_hal_flash_ex.c (97%) rename {Drivers => libs/hal}/stm32f4xx_hal_flash_ex.h (98%) rename {Drivers => libs/hal}/stm32f4xx_hal_flash_ramfunc.c (97%) rename {Drivers => libs/hal}/stm32f4xx_hal_flash_ramfunc.h (96%) rename {Drivers => libs/hal}/stm32f4xx_hal_gpio.c (97%) rename {Drivers => libs/hal}/stm32f4xx_hal_gpio.h (97%) rename {Drivers => libs/hal}/stm32f4xx_hal_gpio_ex.h (98%) rename {Drivers => libs/hal}/stm32f4xx_hal_pcd.c (96%) rename {Drivers => libs/hal}/stm32f4xx_hal_pcd.h (97%) rename {Drivers => libs/hal}/stm32f4xx_hal_pcd_ex.c (96%) rename {Drivers => libs/hal}/stm32f4xx_hal_pcd_ex.h (97%) rename {Drivers => libs/hal}/stm32f4xx_hal_pwr.c (97%) rename {Drivers => libs/hal}/stm32f4xx_hal_pwr.h (97%) rename {Drivers => libs/hal}/stm32f4xx_hal_pwr_ex.c (97%) rename {Drivers => libs/hal}/stm32f4xx_hal_pwr_ex.h (97%) rename {Drivers => libs/hal}/stm32f4xx_hal_rcc.c (97%) rename {Drivers => libs/hal}/stm32f4xx_hal_rcc.h (98%) rename {Drivers => libs/hal}/stm32f4xx_hal_rcc_ex.c (97%) rename {Drivers => libs/hal}/stm32f4xx_hal_rcc_ex.h (98%) rename {Drivers => libs/hal}/stm32f4xx_hal_rng.c (96%) rename {Drivers => libs/hal}/stm32f4xx_hal_rng.h (97%) rename {Drivers => libs/hal}/stm32f4xx_hal_tim.c (96%) rename {Drivers => libs/hal}/stm32f4xx_hal_tim.h (98%) rename {Drivers => libs/hal}/stm32f4xx_hal_tim_ex.c (97%) rename {Drivers => libs/hal}/stm32f4xx_hal_tim_ex.h (97%) rename {Drivers => libs/hal}/stm32f4xx_ll_bus.h (97%) rename {Drivers => libs/hal}/stm32f4xx_ll_cortex.h (97%) rename {Drivers => libs/hal}/stm32f4xx_ll_dac.h (97%) rename {Drivers => libs/hal}/stm32f4xx_ll_dma.h (97%) rename {Drivers => libs/hal}/stm32f4xx_ll_exti.h (97%) rename {Drivers => libs/hal}/stm32f4xx_ll_gpio.h (97%) rename {Drivers => libs/hal}/stm32f4xx_ll_pwr.h (96%) rename {Drivers => libs/hal}/stm32f4xx_ll_rcc.h (97%) rename {Drivers => libs/hal}/stm32f4xx_ll_rng.h (96%) rename {Drivers => libs/hal}/stm32f4xx_ll_system.h (97%) rename {Drivers => libs/hal}/stm32f4xx_ll_tim.h (97%) rename {Drivers => libs/hal}/stm32f4xx_ll_usb.c (96%) rename {Drivers => libs/hal}/stm32f4xx_ll_usb.h (97%) rename {Drivers => libs/hal}/stm32f4xx_ll_utils.h (97%) rename {Middlewares => libs/st_usb}/Makefile (73%) rename {Middlewares => libs/st_usb}/usbd_cdc.c (100%) rename {Middlewares => libs/st_usb}/usbd_cdc.h (100%) create mode 100644 libs/st_usb/usbd_conf.h rename {Middlewares => libs/st_usb}/usbd_core.c (100%) rename {Middlewares => libs/st_usb}/usbd_core.h (100%) rename {Middlewares => libs/st_usb}/usbd_ctlreq.c (100%) rename {Middlewares => libs/st_usb}/usbd_ctlreq.h (100%) rename {Middlewares => libs/st_usb}/usbd_def.h (100%) rename {Middlewares => libs/st_usb}/usbd_ioreq.c (100%) rename {Middlewares => libs/st_usb}/usbd_ioreq.h (100%) delete mode 100644 stm32f4discovery.cfg diff --git a/Drivers/cmsis_armcc.h b/Drivers/cmsis_armcc.h deleted file mode 100644 index 7d751fb..0000000 --- a/Drivers/cmsis_armcc.h +++ /dev/null @@ -1,865 +0,0 @@ -/**************************************************************************//** - * @file cmsis_armcc.h - * @brief CMSIS compiler ARMCC (Arm Compiler 5) header file - * @version V5.0.4 - * @date 10. January 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef __CMSIS_ARMCC_H -#define __CMSIS_ARMCC_H - - -#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677) - #error "Please use Arm Compiler Toolchain V4.0.677 or later!" -#endif - -/* CMSIS compiler control architecture macros */ -#if ((defined (__TARGET_ARCH_6_M ) && (__TARGET_ARCH_6_M == 1)) || \ - (defined (__TARGET_ARCH_6S_M ) && (__TARGET_ARCH_6S_M == 1)) ) - #define __ARM_ARCH_6M__ 1 -#endif - -#if (defined (__TARGET_ARCH_7_M ) && (__TARGET_ARCH_7_M == 1)) - #define __ARM_ARCH_7M__ 1 -#endif - -#if (defined (__TARGET_ARCH_7E_M) && (__TARGET_ARCH_7E_M == 1)) - #define __ARM_ARCH_7EM__ 1 -#endif - - /* __ARM_ARCH_8M_BASE__ not applicable */ - /* __ARM_ARCH_8M_MAIN__ not applicable */ - - -/* CMSIS compiler specific defines */ -#ifndef __ASM - #define __ASM __asm -#endif -#ifndef __INLINE - #define __INLINE __inline -#endif -#ifndef __STATIC_INLINE - #define __STATIC_INLINE static __inline -#endif -#ifndef __STATIC_FORCEINLINE - #define __STATIC_FORCEINLINE static __forceinline -#endif -#ifndef __NO_RETURN - #define __NO_RETURN __declspec(noreturn) -#endif -#ifndef __USED - #define __USED __attribute__((used)) -#endif -#ifndef __WEAK - #define __WEAK __attribute__((weak)) -#endif -#ifndef __PACKED - #define __PACKED __attribute__((packed)) -#endif -#ifndef __PACKED_STRUCT - #define __PACKED_STRUCT __packed struct -#endif -#ifndef __PACKED_UNION - #define __PACKED_UNION __packed union -#endif -#ifndef __UNALIGNED_UINT32 /* deprecated */ - #define __UNALIGNED_UINT32(x) (*((__packed uint32_t *)(x))) -#endif -#ifndef __UNALIGNED_UINT16_WRITE - #define __UNALIGNED_UINT16_WRITE(addr, val) ((*((__packed uint16_t *)(addr))) = (val)) -#endif -#ifndef __UNALIGNED_UINT16_READ - #define __UNALIGNED_UINT16_READ(addr) (*((const __packed uint16_t *)(addr))) -#endif -#ifndef __UNALIGNED_UINT32_WRITE - #define __UNALIGNED_UINT32_WRITE(addr, val) ((*((__packed uint32_t *)(addr))) = (val)) -#endif -#ifndef __UNALIGNED_UINT32_READ - #define __UNALIGNED_UINT32_READ(addr) (*((const __packed uint32_t *)(addr))) -#endif -#ifndef __ALIGNED - #define __ALIGNED(x) __attribute__((aligned(x))) -#endif -#ifndef __RESTRICT - #define __RESTRICT __restrict -#endif - -/* ########################### Core Function Access ########################### */ -/** \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions - @{ - */ - -/** - \brief Enable IRQ Interrupts - \details Enables IRQ interrupts by clearing the I-bit in the CPSR. - Can only be executed in Privileged modes. - */ -/* intrinsic void __enable_irq(); */ - - -/** - \brief Disable IRQ Interrupts - \details Disables IRQ interrupts by setting the I-bit in the CPSR. - Can only be executed in Privileged modes. - */ -/* intrinsic void __disable_irq(); */ - -/** - \brief Get Control Register - \details Returns the content of the Control Register. - \return Control Register value - */ -__STATIC_INLINE uint32_t __get_CONTROL(void) -{ - register uint32_t __regControl __ASM("control"); - return(__regControl); -} - - -/** - \brief Set Control Register - \details Writes the given value to the Control Register. - \param [in] control Control Register value to set - */ -__STATIC_INLINE void __set_CONTROL(uint32_t control) -{ - register uint32_t __regControl __ASM("control"); - __regControl = control; -} - - -/** - \brief Get IPSR Register - \details Returns the content of the IPSR Register. - \return IPSR Register value - */ -__STATIC_INLINE uint32_t __get_IPSR(void) -{ - register uint32_t __regIPSR __ASM("ipsr"); - return(__regIPSR); -} - - -/** - \brief Get APSR Register - \details Returns the content of the APSR Register. - \return APSR Register value - */ -__STATIC_INLINE uint32_t __get_APSR(void) -{ - register uint32_t __regAPSR __ASM("apsr"); - return(__regAPSR); -} - - -/** - \brief Get xPSR Register - \details Returns the content of the xPSR Register. - \return xPSR Register value - */ -__STATIC_INLINE uint32_t __get_xPSR(void) -{ - register uint32_t __regXPSR __ASM("xpsr"); - return(__regXPSR); -} - - -/** - \brief Get Process Stack Pointer - \details Returns the current value of the Process Stack Pointer (PSP). - \return PSP Register value - */ -__STATIC_INLINE uint32_t __get_PSP(void) -{ - register uint32_t __regProcessStackPointer __ASM("psp"); - return(__regProcessStackPointer); -} - - -/** - \brief Set Process Stack Pointer - \details Assigns the given value to the Process Stack Pointer (PSP). - \param [in] topOfProcStack Process Stack Pointer value to set - */ -__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack) -{ - register uint32_t __regProcessStackPointer __ASM("psp"); - __regProcessStackPointer = topOfProcStack; -} - - -/** - \brief Get Main Stack Pointer - \details Returns the current value of the Main Stack Pointer (MSP). - \return MSP Register value - */ -__STATIC_INLINE uint32_t __get_MSP(void) -{ - register uint32_t __regMainStackPointer __ASM("msp"); - return(__regMainStackPointer); -} - - -/** - \brief Set Main Stack Pointer - \details Assigns the given value to the Main Stack Pointer (MSP). - \param [in] topOfMainStack Main Stack Pointer value to set - */ -__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack) -{ - register uint32_t __regMainStackPointer __ASM("msp"); - __regMainStackPointer = topOfMainStack; -} - - -/** - \brief Get Priority Mask - \details Returns the current state of the priority mask bit from the Priority Mask Register. - \return Priority Mask value - */ -__STATIC_INLINE uint32_t __get_PRIMASK(void) -{ - register uint32_t __regPriMask __ASM("primask"); - return(__regPriMask); -} - - -/** - \brief Set Priority Mask - \details Assigns the given value to the Priority Mask Register. - \param [in] priMask Priority Mask - */ -__STATIC_INLINE void __set_PRIMASK(uint32_t priMask) -{ - register uint32_t __regPriMask __ASM("primask"); - __regPriMask = (priMask); -} - - -#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) - -/** - \brief Enable FIQ - \details Enables FIQ interrupts by clearing the F-bit in the CPSR. - Can only be executed in Privileged modes. - */ -#define __enable_fault_irq __enable_fiq - - -/** - \brief Disable FIQ - \details Disables FIQ interrupts by setting the F-bit in the CPSR. - Can only be executed in Privileged modes. - */ -#define __disable_fault_irq __disable_fiq - - -/** - \brief Get Base Priority - \details Returns the current value of the Base Priority register. - \return Base Priority register value - */ -__STATIC_INLINE uint32_t __get_BASEPRI(void) -{ - register uint32_t __regBasePri __ASM("basepri"); - return(__regBasePri); -} - - -/** - \brief Set Base Priority - \details Assigns the given value to the Base Priority register. - \param [in] basePri Base Priority value to set - */ -__STATIC_INLINE void __set_BASEPRI(uint32_t basePri) -{ - register uint32_t __regBasePri __ASM("basepri"); - __regBasePri = (basePri & 0xFFU); -} - - -/** - \brief Set Base Priority with condition - \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, - or the new value increases the BASEPRI priority level. - \param [in] basePri Base Priority value to set - */ -__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri) -{ - register uint32_t __regBasePriMax __ASM("basepri_max"); - __regBasePriMax = (basePri & 0xFFU); -} - - -/** - \brief Get Fault Mask - \details Returns the current value of the Fault Mask register. - \return Fault Mask register value - */ -__STATIC_INLINE uint32_t __get_FAULTMASK(void) -{ - register uint32_t __regFaultMask __ASM("faultmask"); - return(__regFaultMask); -} - - -/** - \brief Set Fault Mask - \details Assigns the given value to the Fault Mask register. - \param [in] faultMask Fault Mask value to set - */ -__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask) -{ - register uint32_t __regFaultMask __ASM("faultmask"); - __regFaultMask = (faultMask & (uint32_t)1U); -} - -#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ - - -/** - \brief Get FPSCR - \details Returns the current value of the Floating Point Status/Control register. - \return Floating Point Status/Control register value - */ -__STATIC_INLINE uint32_t __get_FPSCR(void) -{ -#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ - (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) - register uint32_t __regfpscr __ASM("fpscr"); - return(__regfpscr); -#else - return(0U); -#endif -} - - -/** - \brief Set FPSCR - \details Assigns the given value to the Floating Point Status/Control register. - \param [in] fpscr Floating Point Status/Control value to set - */ -__STATIC_INLINE void __set_FPSCR(uint32_t fpscr) -{ -#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ - (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) - register uint32_t __regfpscr __ASM("fpscr"); - __regfpscr = (fpscr); -#else - (void)fpscr; -#endif -} - - -/*@} end of CMSIS_Core_RegAccFunctions */ - - -/* ########################## Core Instruction Access ######################### */ -/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface - Access to dedicated instructions - @{ -*/ - -/** - \brief No Operation - \details No Operation does nothing. This instruction can be used for code alignment purposes. - */ -#define __NOP __nop - - -/** - \brief Wait For Interrupt - \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. - */ -#define __WFI __wfi - - -/** - \brief Wait For Event - \details Wait For Event is a hint instruction that permits the processor to enter - a low-power state until one of a number of events occurs. - */ -#define __WFE __wfe - - -/** - \brief Send Event - \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. - */ -#define __SEV __sev - - -/** - \brief Instruction Synchronization Barrier - \details Instruction Synchronization Barrier flushes the pipeline in the processor, - so that all instructions following the ISB are fetched from cache or memory, - after the instruction has been completed. - */ -#define __ISB() do {\ - __schedule_barrier();\ - __isb(0xF);\ - __schedule_barrier();\ - } while (0U) - -/** - \brief Data Synchronization Barrier - \details Acts as a special kind of Data Memory Barrier. - It completes when all explicit memory accesses before this instruction complete. - */ -#define __DSB() do {\ - __schedule_barrier();\ - __dsb(0xF);\ - __schedule_barrier();\ - } while (0U) - -/** - \brief Data Memory Barrier - \details Ensures the apparent order of the explicit memory operations before - and after the instruction, without ensuring their completion. - */ -#define __DMB() do {\ - __schedule_barrier();\ - __dmb(0xF);\ - __schedule_barrier();\ - } while (0U) - - -/** - \brief Reverse byte order (32 bit) - \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. - \param [in] value Value to reverse - \return Reversed value - */ -#define __REV __rev - - -/** - \brief Reverse byte order (16 bit) - \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. - \param [in] value Value to reverse - \return Reversed value - */ -#ifndef __NO_EMBEDDED_ASM -__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value) -{ - rev16 r0, r0 - bx lr -} -#endif - - -/** - \brief Reverse byte order (16 bit) - \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. - \param [in] value Value to reverse - \return Reversed value - */ -#ifndef __NO_EMBEDDED_ASM -__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int16_t __REVSH(int16_t value) -{ - revsh r0, r0 - bx lr -} -#endif - - -/** - \brief Rotate Right in unsigned value (32 bit) - \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. - \param [in] op1 Value to rotate - \param [in] op2 Number of Bits to rotate - \return Rotated value - */ -#define __ROR __ror - - -/** - \brief Breakpoint - \details Causes the processor to enter Debug state. - Debug tools can use this to investigate system state when the instruction at a particular address is reached. - \param [in] value is ignored by the processor. - If required, a debugger can use it to store additional information about the breakpoint. - */ -#define __BKPT(value) __breakpoint(value) - - -/** - \brief Reverse bit order of value - \details Reverses the bit order of the given value. - \param [in] value Value to reverse - \return Reversed value - */ -#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) - #define __RBIT __rbit -#else -__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value) -{ - uint32_t result; - uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */ - - result = value; /* r will be reversed bits of v; first get LSB of v */ - for (value >>= 1U; value != 0U; value >>= 1U) - { - result <<= 1U; - result |= value & 1U; - s--; - } - result <<= s; /* shift when v's highest bits are zero */ - return result; -} -#endif - - -/** - \brief Count leading zeros - \details Counts the number of leading zeros of a data value. - \param [in] value Value to count the leading zeros - \return number of leading zeros in value - */ -#define __CLZ __clz - - -#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) - -/** - \brief LDR Exclusive (8 bit) - \details Executes a exclusive LDR instruction for 8 bit value. - \param [in] ptr Pointer to data - \return value of type uint8_t at (*ptr) - */ -#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) - #define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr)) -#else - #define __LDREXB(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr)) _Pragma("pop") -#endif - - -/** - \brief LDR Exclusive (16 bit) - \details Executes a exclusive LDR instruction for 16 bit values. - \param [in] ptr Pointer to data - \return value of type uint16_t at (*ptr) - */ -#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) - #define __LDREXH(ptr) ((uint16_t) __ldrex(ptr)) -#else - #define __LDREXH(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr)) _Pragma("pop") -#endif - - -/** - \brief LDR Exclusive (32 bit) - \details Executes a exclusive LDR instruction for 32 bit values. - \param [in] ptr Pointer to data - \return value of type uint32_t at (*ptr) - */ -#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) - #define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr)) -#else - #define __LDREXW(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr)) _Pragma("pop") -#endif - - -/** - \brief STR Exclusive (8 bit) - \details Executes a exclusive STR instruction for 8 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) - #define __STREXB(value, ptr) __strex(value, ptr) -#else - #define __STREXB(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") -#endif - - -/** - \brief STR Exclusive (16 bit) - \details Executes a exclusive STR instruction for 16 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) - #define __STREXH(value, ptr) __strex(value, ptr) -#else - #define __STREXH(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") -#endif - - -/** - \brief STR Exclusive (32 bit) - \details Executes a exclusive STR instruction for 32 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) - #define __STREXW(value, ptr) __strex(value, ptr) -#else - #define __STREXW(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") -#endif - - -/** - \brief Remove the exclusive lock - \details Removes the exclusive lock which is created by LDREX. - */ -#define __CLREX __clrex - - -/** - \brief Signed Saturate - \details Saturates a signed value. - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (1..32) - \return Saturated value - */ -#define __SSAT __ssat - - -/** - \brief Unsigned Saturate - \details Saturates an unsigned value. - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (0..31) - \return Saturated value - */ -#define __USAT __usat - - -/** - \brief Rotate Right with Extend (32 bit) - \details Moves each bit of a bitstring right by one bit. - The carry input is shifted in at the left end of the bitstring. - \param [in] value Value to rotate - \return Rotated value - */ -#ifndef __NO_EMBEDDED_ASM -__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value) -{ - rrx r0, r0 - bx lr -} -#endif - - -/** - \brief LDRT Unprivileged (8 bit) - \details Executes a Unprivileged LDRT instruction for 8 bit value. - \param [in] ptr Pointer to data - \return value of type uint8_t at (*ptr) - */ -#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr)) - - -/** - \brief LDRT Unprivileged (16 bit) - \details Executes a Unprivileged LDRT instruction for 16 bit values. - \param [in] ptr Pointer to data - \return value of type uint16_t at (*ptr) - */ -#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr)) - - -/** - \brief LDRT Unprivileged (32 bit) - \details Executes a Unprivileged LDRT instruction for 32 bit values. - \param [in] ptr Pointer to data - \return value of type uint32_t at (*ptr) - */ -#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr)) - - -/** - \brief STRT Unprivileged (8 bit) - \details Executes a Unprivileged STRT instruction for 8 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -#define __STRBT(value, ptr) __strt(value, ptr) - - -/** - \brief STRT Unprivileged (16 bit) - \details Executes a Unprivileged STRT instruction for 16 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -#define __STRHT(value, ptr) __strt(value, ptr) - - -/** - \brief STRT Unprivileged (32 bit) - \details Executes a Unprivileged STRT instruction for 32 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -#define __STRT(value, ptr) __strt(value, ptr) - -#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ - -/** - \brief Signed Saturate - \details Saturates a signed value. - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (1..32) - \return Saturated value - */ -__attribute__((always_inline)) __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat) -{ - if ((sat >= 1U) && (sat <= 32U)) - { - const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); - const int32_t min = -1 - max ; - if (val > max) - { - return max; - } - else if (val < min) - { - return min; - } - } - return val; -} - -/** - \brief Unsigned Saturate - \details Saturates an unsigned value. - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (0..31) - \return Saturated value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat) -{ - if (sat <= 31U) - { - const uint32_t max = ((1U << sat) - 1U); - if (val > (int32_t)max) - { - return max; - } - else if (val < 0) - { - return 0U; - } - } - return (uint32_t)val; -} - -#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ - (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ - -/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ - - -/* ################### Compiler specific Intrinsics ########################### */ -/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics - Access to dedicated SIMD instructions - @{ -*/ - -#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) - -#define __SADD8 __sadd8 -#define __QADD8 __qadd8 -#define __SHADD8 __shadd8 -#define __UADD8 __uadd8 -#define __UQADD8 __uqadd8 -#define __UHADD8 __uhadd8 -#define __SSUB8 __ssub8 -#define __QSUB8 __qsub8 -#define __SHSUB8 __shsub8 -#define __USUB8 __usub8 -#define __UQSUB8 __uqsub8 -#define __UHSUB8 __uhsub8 -#define __SADD16 __sadd16 -#define __QADD16 __qadd16 -#define __SHADD16 __shadd16 -#define __UADD16 __uadd16 -#define __UQADD16 __uqadd16 -#define __UHADD16 __uhadd16 -#define __SSUB16 __ssub16 -#define __QSUB16 __qsub16 -#define __SHSUB16 __shsub16 -#define __USUB16 __usub16 -#define __UQSUB16 __uqsub16 -#define __UHSUB16 __uhsub16 -#define __SASX __sasx -#define __QASX __qasx -#define __SHASX __shasx -#define __UASX __uasx -#define __UQASX __uqasx -#define __UHASX __uhasx -#define __SSAX __ssax -#define __QSAX __qsax -#define __SHSAX __shsax -#define __USAX __usax -#define __UQSAX __uqsax -#define __UHSAX __uhsax -#define __USAD8 __usad8 -#define __USADA8 __usada8 -#define __SSAT16 __ssat16 -#define __USAT16 __usat16 -#define __UXTB16 __uxtb16 -#define __UXTAB16 __uxtab16 -#define __SXTB16 __sxtb16 -#define __SXTAB16 __sxtab16 -#define __SMUAD __smuad -#define __SMUADX __smuadx -#define __SMLAD __smlad -#define __SMLADX __smladx -#define __SMLALD __smlald -#define __SMLALDX __smlaldx -#define __SMUSD __smusd -#define __SMUSDX __smusdx -#define __SMLSD __smlsd -#define __SMLSDX __smlsdx -#define __SMLSLD __smlsld -#define __SMLSLDX __smlsldx -#define __SEL __sel -#define __QADD __qadd -#define __QSUB __qsub - -#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ - ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) - -#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ - ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) - -#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \ - ((int64_t)(ARG3) << 32U) ) >> 32U)) - -#endif /* ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ -/*@} end of group CMSIS_SIMD_intrinsics */ - - -#endif /* __CMSIS_ARMCC_H */ diff --git a/Drivers/cmsis_iccarm.h b/Drivers/cmsis_iccarm.h deleted file mode 100644 index 3c90a2c..0000000 --- a/Drivers/cmsis_iccarm.h +++ /dev/null @@ -1,935 +0,0 @@ -/**************************************************************************//** - * @file cmsis_iccarm.h - * @brief CMSIS compiler ICCARM (IAR Compiler for Arm) header file - * @version V5.0.7 - * @date 19. June 2018 - ******************************************************************************/ - -//------------------------------------------------------------------------------ -// -// Copyright (c) 2017-2018 IAR Systems -// -// Licensed under the Apache License, Version 2.0 (the "License") -// you may not use this file except in compliance with the License. -// You may obtain a copy of the License at -// http://www.apache.org/licenses/LICENSE-2.0 -// -// Unless required by applicable law or agreed to in writing, software -// distributed under the License is distributed on an "AS IS" BASIS, -// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -// See the License for the specific language governing permissions and -// limitations under the License. -// -//------------------------------------------------------------------------------ - - -#ifndef __CMSIS_ICCARM_H__ -#define __CMSIS_ICCARM_H__ - -#ifndef __ICCARM__ - #error This file should only be compiled by ICCARM -#endif - -#pragma system_include - -#define __IAR_FT _Pragma("inline=forced") __intrinsic - -#if (__VER__ >= 8000000) - #define __ICCARM_V8 1 -#else - #define __ICCARM_V8 0 -#endif - -#ifndef __ALIGNED - #if __ICCARM_V8 - #define __ALIGNED(x) __attribute__((aligned(x))) - #elif (__VER__ >= 7080000) - /* Needs IAR language extensions */ - #define __ALIGNED(x) __attribute__((aligned(x))) - #else - #warning No compiler specific solution for __ALIGNED.__ALIGNED is ignored. - #define __ALIGNED(x) - #endif -#endif - - -/* Define compiler macros for CPU architecture, used in CMSIS 5. - */ -#if __ARM_ARCH_6M__ || __ARM_ARCH_7M__ || __ARM_ARCH_7EM__ || __ARM_ARCH_8M_BASE__ || __ARM_ARCH_8M_MAIN__ -/* Macros already defined */ -#else - #if defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__) - #define __ARM_ARCH_8M_MAIN__ 1 - #elif defined(__ARM8M_BASELINE__) - #define __ARM_ARCH_8M_BASE__ 1 - #elif defined(__ARM_ARCH_PROFILE) && __ARM_ARCH_PROFILE == 'M' - #if __ARM_ARCH == 6 - #define __ARM_ARCH_6M__ 1 - #elif __ARM_ARCH == 7 - #if __ARM_FEATURE_DSP - #define __ARM_ARCH_7EM__ 1 - #else - #define __ARM_ARCH_7M__ 1 - #endif - #endif /* __ARM_ARCH */ - #endif /* __ARM_ARCH_PROFILE == 'M' */ -#endif - -/* Alternativ core deduction for older ICCARM's */ -#if !defined(__ARM_ARCH_6M__) && !defined(__ARM_ARCH_7M__) && !defined(__ARM_ARCH_7EM__) && \ - !defined(__ARM_ARCH_8M_BASE__) && !defined(__ARM_ARCH_8M_MAIN__) - #if defined(__ARM6M__) && (__CORE__ == __ARM6M__) - #define __ARM_ARCH_6M__ 1 - #elif defined(__ARM7M__) && (__CORE__ == __ARM7M__) - #define __ARM_ARCH_7M__ 1 - #elif defined(__ARM7EM__) && (__CORE__ == __ARM7EM__) - #define __ARM_ARCH_7EM__ 1 - #elif defined(__ARM8M_BASELINE__) && (__CORE == __ARM8M_BASELINE__) - #define __ARM_ARCH_8M_BASE__ 1 - #elif defined(__ARM8M_MAINLINE__) && (__CORE == __ARM8M_MAINLINE__) - #define __ARM_ARCH_8M_MAIN__ 1 - #elif defined(__ARM8EM_MAINLINE__) && (__CORE == __ARM8EM_MAINLINE__) - #define __ARM_ARCH_8M_MAIN__ 1 - #else - #error "Unknown target." - #endif -#endif - - - -#if defined(__ARM_ARCH_6M__) && __ARM_ARCH_6M__==1 - #define __IAR_M0_FAMILY 1 -#elif defined(__ARM_ARCH_8M_BASE__) && __ARM_ARCH_8M_BASE__==1 - #define __IAR_M0_FAMILY 1 -#else - #define __IAR_M0_FAMILY 0 -#endif - - -#ifndef __ASM - #define __ASM __asm -#endif - -#ifndef __INLINE - #define __INLINE inline -#endif - -#ifndef __NO_RETURN - #if __ICCARM_V8 - #define __NO_RETURN __attribute__((__noreturn__)) - #else - #define __NO_RETURN _Pragma("object_attribute=__noreturn") - #endif -#endif - -#ifndef __PACKED - #if __ICCARM_V8 - #define __PACKED __attribute__((packed, aligned(1))) - #else - /* Needs IAR language extensions */ - #define __PACKED __packed - #endif -#endif - -#ifndef __PACKED_STRUCT - #if __ICCARM_V8 - #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) - #else - /* Needs IAR language extensions */ - #define __PACKED_STRUCT __packed struct - #endif -#endif - -#ifndef __PACKED_UNION - #if __ICCARM_V8 - #define __PACKED_UNION union __attribute__((packed, aligned(1))) - #else - /* Needs IAR language extensions */ - #define __PACKED_UNION __packed union - #endif -#endif - -#ifndef __RESTRICT - #define __RESTRICT __restrict -#endif - -#ifndef __STATIC_INLINE - #define __STATIC_INLINE static inline -#endif - -#ifndef __FORCEINLINE - #define __FORCEINLINE _Pragma("inline=forced") -#endif - -#ifndef __STATIC_FORCEINLINE - #define __STATIC_FORCEINLINE __FORCEINLINE __STATIC_INLINE -#endif - -#ifndef __UNALIGNED_UINT16_READ -#pragma language=save -#pragma language=extended -__IAR_FT uint16_t __iar_uint16_read(void const *ptr) -{ - return *(__packed uint16_t*)(ptr); -} -#pragma language=restore -#define __UNALIGNED_UINT16_READ(PTR) __iar_uint16_read(PTR) -#endif - - -#ifndef __UNALIGNED_UINT16_WRITE -#pragma language=save -#pragma language=extended -__IAR_FT void __iar_uint16_write(void const *ptr, uint16_t val) -{ - *(__packed uint16_t*)(ptr) = val;; -} -#pragma language=restore -#define __UNALIGNED_UINT16_WRITE(PTR,VAL) __iar_uint16_write(PTR,VAL) -#endif - -#ifndef __UNALIGNED_UINT32_READ -#pragma language=save -#pragma language=extended -__IAR_FT uint32_t __iar_uint32_read(void const *ptr) -{ - return *(__packed uint32_t*)(ptr); -} -#pragma language=restore -#define __UNALIGNED_UINT32_READ(PTR) __iar_uint32_read(PTR) -#endif - -#ifndef __UNALIGNED_UINT32_WRITE -#pragma language=save -#pragma language=extended -__IAR_FT void __iar_uint32_write(void const *ptr, uint32_t val) -{ - *(__packed uint32_t*)(ptr) = val;; -} -#pragma language=restore -#define __UNALIGNED_UINT32_WRITE(PTR,VAL) __iar_uint32_write(PTR,VAL) -#endif - -#ifndef __UNALIGNED_UINT32 /* deprecated */ -#pragma language=save -#pragma language=extended -__packed struct __iar_u32 { uint32_t v; }; -#pragma language=restore -#define __UNALIGNED_UINT32(PTR) (((struct __iar_u32 *)(PTR))->v) -#endif - -#ifndef __USED - #if __ICCARM_V8 - #define __USED __attribute__((used)) - #else - #define __USED _Pragma("__root") - #endif -#endif - -#ifndef __WEAK - #if __ICCARM_V8 - #define __WEAK __attribute__((weak)) - #else - #define __WEAK _Pragma("__weak") - #endif -#endif - - -#ifndef __ICCARM_INTRINSICS_VERSION__ - #define __ICCARM_INTRINSICS_VERSION__ 0 -#endif - -#if __ICCARM_INTRINSICS_VERSION__ == 2 - - #if defined(__CLZ) - #undef __CLZ - #endif - #if defined(__REVSH) - #undef __REVSH - #endif - #if defined(__RBIT) - #undef __RBIT - #endif - #if defined(__SSAT) - #undef __SSAT - #endif - #if defined(__USAT) - #undef __USAT - #endif - - #include "iccarm_builtin.h" - - #define __disable_fault_irq __iar_builtin_disable_fiq - #define __disable_irq __iar_builtin_disable_interrupt - #define __enable_fault_irq __iar_builtin_enable_fiq - #define __enable_irq __iar_builtin_enable_interrupt - #define __arm_rsr __iar_builtin_rsr - #define __arm_wsr __iar_builtin_wsr - - - #define __get_APSR() (__arm_rsr("APSR")) - #define __get_BASEPRI() (__arm_rsr("BASEPRI")) - #define __get_CONTROL() (__arm_rsr("CONTROL")) - #define __get_FAULTMASK() (__arm_rsr("FAULTMASK")) - - #if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ - (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) - #define __get_FPSCR() (__arm_rsr("FPSCR")) - #define __set_FPSCR(VALUE) (__arm_wsr("FPSCR", (VALUE))) - #else - #define __get_FPSCR() ( 0 ) - #define __set_FPSCR(VALUE) ((void)VALUE) - #endif - - #define __get_IPSR() (__arm_rsr("IPSR")) - #define __get_MSP() (__arm_rsr("MSP")) - #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure MSPLIM is RAZ/WI - #define __get_MSPLIM() (0U) - #else - #define __get_MSPLIM() (__arm_rsr("MSPLIM")) - #endif - #define __get_PRIMASK() (__arm_rsr("PRIMASK")) - #define __get_PSP() (__arm_rsr("PSP")) - - #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure PSPLIM is RAZ/WI - #define __get_PSPLIM() (0U) - #else - #define __get_PSPLIM() (__arm_rsr("PSPLIM")) - #endif - - #define __get_xPSR() (__arm_rsr("xPSR")) - - #define __set_BASEPRI(VALUE) (__arm_wsr("BASEPRI", (VALUE))) - #define __set_BASEPRI_MAX(VALUE) (__arm_wsr("BASEPRI_MAX", (VALUE))) - #define __set_CONTROL(VALUE) (__arm_wsr("CONTROL", (VALUE))) - #define __set_FAULTMASK(VALUE) (__arm_wsr("FAULTMASK", (VALUE))) - #define __set_MSP(VALUE) (__arm_wsr("MSP", (VALUE))) - - #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure MSPLIM is RAZ/WI - #define __set_MSPLIM(VALUE) ((void)(VALUE)) - #else - #define __set_MSPLIM(VALUE) (__arm_wsr("MSPLIM", (VALUE))) - #endif - #define __set_PRIMASK(VALUE) (__arm_wsr("PRIMASK", (VALUE))) - #define __set_PSP(VALUE) (__arm_wsr("PSP", (VALUE))) - #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure PSPLIM is RAZ/WI - #define __set_PSPLIM(VALUE) ((void)(VALUE)) - #else - #define __set_PSPLIM(VALUE) (__arm_wsr("PSPLIM", (VALUE))) - #endif - - #define __TZ_get_CONTROL_NS() (__arm_rsr("CONTROL_NS")) - #define __TZ_set_CONTROL_NS(VALUE) (__arm_wsr("CONTROL_NS", (VALUE))) - #define __TZ_get_PSP_NS() (__arm_rsr("PSP_NS")) - #define __TZ_set_PSP_NS(VALUE) (__arm_wsr("PSP_NS", (VALUE))) - #define __TZ_get_MSP_NS() (__arm_rsr("MSP_NS")) - #define __TZ_set_MSP_NS(VALUE) (__arm_wsr("MSP_NS", (VALUE))) - #define __TZ_get_SP_NS() (__arm_rsr("SP_NS")) - #define __TZ_set_SP_NS(VALUE) (__arm_wsr("SP_NS", (VALUE))) - #define __TZ_get_PRIMASK_NS() (__arm_rsr("PRIMASK_NS")) - #define __TZ_set_PRIMASK_NS(VALUE) (__arm_wsr("PRIMASK_NS", (VALUE))) - #define __TZ_get_BASEPRI_NS() (__arm_rsr("BASEPRI_NS")) - #define __TZ_set_BASEPRI_NS(VALUE) (__arm_wsr("BASEPRI_NS", (VALUE))) - #define __TZ_get_FAULTMASK_NS() (__arm_rsr("FAULTMASK_NS")) - #define __TZ_set_FAULTMASK_NS(VALUE)(__arm_wsr("FAULTMASK_NS", (VALUE))) - - #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure PSPLIM is RAZ/WI - #define __TZ_get_PSPLIM_NS() (0U) - #define __TZ_set_PSPLIM_NS(VALUE) ((void)(VALUE)) - #else - #define __TZ_get_PSPLIM_NS() (__arm_rsr("PSPLIM_NS")) - #define __TZ_set_PSPLIM_NS(VALUE) (__arm_wsr("PSPLIM_NS", (VALUE))) - #endif - - #define __TZ_get_MSPLIM_NS() (__arm_rsr("MSPLIM_NS")) - #define __TZ_set_MSPLIM_NS(VALUE) (__arm_wsr("MSPLIM_NS", (VALUE))) - - #define __NOP __iar_builtin_no_operation - - #define __CLZ __iar_builtin_CLZ - #define __CLREX __iar_builtin_CLREX - - #define __DMB __iar_builtin_DMB - #define __DSB __iar_builtin_DSB - #define __ISB __iar_builtin_ISB - - #define __LDREXB __iar_builtin_LDREXB - #define __LDREXH __iar_builtin_LDREXH - #define __LDREXW __iar_builtin_LDREX - - #define __RBIT __iar_builtin_RBIT - #define __REV __iar_builtin_REV - #define __REV16 __iar_builtin_REV16 - - __IAR_FT int16_t __REVSH(int16_t val) - { - return (int16_t) __iar_builtin_REVSH(val); - } - - #define __ROR __iar_builtin_ROR - #define __RRX __iar_builtin_RRX - - #define __SEV __iar_builtin_SEV - - #if !__IAR_M0_FAMILY - #define __SSAT __iar_builtin_SSAT - #endif - - #define __STREXB __iar_builtin_STREXB - #define __STREXH __iar_builtin_STREXH - #define __STREXW __iar_builtin_STREX - - #if !__IAR_M0_FAMILY - #define __USAT __iar_builtin_USAT - #endif - - #define __WFE __iar_builtin_WFE - #define __WFI __iar_builtin_WFI - - #if __ARM_MEDIA__ - #define __SADD8 __iar_builtin_SADD8 - #define __QADD8 __iar_builtin_QADD8 - #define __SHADD8 __iar_builtin_SHADD8 - #define __UADD8 __iar_builtin_UADD8 - #define __UQADD8 __iar_builtin_UQADD8 - #define __UHADD8 __iar_builtin_UHADD8 - #define __SSUB8 __iar_builtin_SSUB8 - #define __QSUB8 __iar_builtin_QSUB8 - #define __SHSUB8 __iar_builtin_SHSUB8 - #define __USUB8 __iar_builtin_USUB8 - #define __UQSUB8 __iar_builtin_UQSUB8 - #define __UHSUB8 __iar_builtin_UHSUB8 - #define __SADD16 __iar_builtin_SADD16 - #define __QADD16 __iar_builtin_QADD16 - #define __SHADD16 __iar_builtin_SHADD16 - #define __UADD16 __iar_builtin_UADD16 - #define __UQADD16 __iar_builtin_UQADD16 - #define __UHADD16 __iar_builtin_UHADD16 - #define __SSUB16 __iar_builtin_SSUB16 - #define __QSUB16 __iar_builtin_QSUB16 - #define __SHSUB16 __iar_builtin_SHSUB16 - #define __USUB16 __iar_builtin_USUB16 - #define __UQSUB16 __iar_builtin_UQSUB16 - #define __UHSUB16 __iar_builtin_UHSUB16 - #define __SASX __iar_builtin_SASX - #define __QASX __iar_builtin_QASX - #define __SHASX __iar_builtin_SHASX - #define __UASX __iar_builtin_UASX - #define __UQASX __iar_builtin_UQASX - #define __UHASX __iar_builtin_UHASX - #define __SSAX __iar_builtin_SSAX - #define __QSAX __iar_builtin_QSAX - #define __SHSAX __iar_builtin_SHSAX - #define __USAX __iar_builtin_USAX - #define __UQSAX __iar_builtin_UQSAX - #define __UHSAX __iar_builtin_UHSAX - #define __USAD8 __iar_builtin_USAD8 - #define __USADA8 __iar_builtin_USADA8 - #define __SSAT16 __iar_builtin_SSAT16 - #define __USAT16 __iar_builtin_USAT16 - #define __UXTB16 __iar_builtin_UXTB16 - #define __UXTAB16 __iar_builtin_UXTAB16 - #define __SXTB16 __iar_builtin_SXTB16 - #define __SXTAB16 __iar_builtin_SXTAB16 - #define __SMUAD __iar_builtin_SMUAD - #define __SMUADX __iar_builtin_SMUADX - #define __SMMLA __iar_builtin_SMMLA - #define __SMLAD __iar_builtin_SMLAD - #define __SMLADX __iar_builtin_SMLADX - #define __SMLALD __iar_builtin_SMLALD - #define __SMLALDX __iar_builtin_SMLALDX - #define __SMUSD __iar_builtin_SMUSD - #define __SMUSDX __iar_builtin_SMUSDX - #define __SMLSD __iar_builtin_SMLSD - #define __SMLSDX __iar_builtin_SMLSDX - #define __SMLSLD __iar_builtin_SMLSLD - #define __SMLSLDX __iar_builtin_SMLSLDX - #define __SEL __iar_builtin_SEL - #define __QADD __iar_builtin_QADD - #define __QSUB __iar_builtin_QSUB - #define __PKHBT __iar_builtin_PKHBT - #define __PKHTB __iar_builtin_PKHTB - #endif - -#else /* __ICCARM_INTRINSICS_VERSION__ == 2 */ - - #if __IAR_M0_FAMILY - /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */ - #define __CLZ __cmsis_iar_clz_not_active - #define __SSAT __cmsis_iar_ssat_not_active - #define __USAT __cmsis_iar_usat_not_active - #define __RBIT __cmsis_iar_rbit_not_active - #define __get_APSR __cmsis_iar_get_APSR_not_active - #endif - - - #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ - (defined (__FPU_USED ) && (__FPU_USED == 1U)) )) - #define __get_FPSCR __cmsis_iar_get_FPSR_not_active - #define __set_FPSCR __cmsis_iar_set_FPSR_not_active - #endif - - #ifdef __INTRINSICS_INCLUDED - #error intrinsics.h is already included previously! - #endif - - #include - - #if __IAR_M0_FAMILY - /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */ - #undef __CLZ - #undef __SSAT - #undef __USAT - #undef __RBIT - #undef __get_APSR - - __STATIC_INLINE uint8_t __CLZ(uint32_t data) - { - if (data == 0U) { return 32U; } - - uint32_t count = 0U; - uint32_t mask = 0x80000000U; - - while ((data & mask) == 0U) - { - count += 1U; - mask = mask >> 1U; - } - return count; - } - - __STATIC_INLINE uint32_t __RBIT(uint32_t v) - { - uint8_t sc = 31U; - uint32_t r = v; - for (v >>= 1U; v; v >>= 1U) - { - r <<= 1U; - r |= v & 1U; - sc--; - } - return (r << sc); - } - - __STATIC_INLINE uint32_t __get_APSR(void) - { - uint32_t res; - __asm("MRS %0,APSR" : "=r" (res)); - return res; - } - - #endif - - #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ - (defined (__FPU_USED ) && (__FPU_USED == 1U)) )) - #undef __get_FPSCR - #undef __set_FPSCR - #define __get_FPSCR() (0) - #define __set_FPSCR(VALUE) ((void)VALUE) - #endif - - #pragma diag_suppress=Pe940 - #pragma diag_suppress=Pe177 - - #define __enable_irq __enable_interrupt - #define __disable_irq __disable_interrupt - #define __NOP __no_operation - - #define __get_xPSR __get_PSR - - #if (!defined(__ARM_ARCH_6M__) || __ARM_ARCH_6M__==0) - - __IAR_FT uint32_t __LDREXW(uint32_t volatile *ptr) - { - return __LDREX((unsigned long *)ptr); - } - - __IAR_FT uint32_t __STREXW(uint32_t value, uint32_t volatile *ptr) - { - return __STREX(value, (unsigned long *)ptr); - } - #endif - - - /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */ - #if (__CORTEX_M >= 0x03) - - __IAR_FT uint32_t __RRX(uint32_t value) - { - uint32_t result; - __ASM("RRX %0, %1" : "=r"(result) : "r" (value) : "cc"); - return(result); - } - - __IAR_FT void __set_BASEPRI_MAX(uint32_t value) - { - __asm volatile("MSR BASEPRI_MAX,%0"::"r" (value)); - } - - - #define __enable_fault_irq __enable_fiq - #define __disable_fault_irq __disable_fiq - - - #endif /* (__CORTEX_M >= 0x03) */ - - __IAR_FT uint32_t __ROR(uint32_t op1, uint32_t op2) - { - return (op1 >> op2) | (op1 << ((sizeof(op1)*8)-op2)); - } - - #if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ - (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) - - __IAR_FT uint32_t __get_MSPLIM(void) - { - uint32_t res; - #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure MSPLIM is RAZ/WI - res = 0U; - #else - __asm volatile("MRS %0,MSPLIM" : "=r" (res)); - #endif - return res; - } - - __IAR_FT void __set_MSPLIM(uint32_t value) - { - #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure MSPLIM is RAZ/WI - (void)value; - #else - __asm volatile("MSR MSPLIM,%0" :: "r" (value)); - #endif - } - - __IAR_FT uint32_t __get_PSPLIM(void) - { - uint32_t res; - #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure PSPLIM is RAZ/WI - res = 0U; - #else - __asm volatile("MRS %0,PSPLIM" : "=r" (res)); - #endif - return res; - } - - __IAR_FT void __set_PSPLIM(uint32_t value) - { - #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure PSPLIM is RAZ/WI - (void)value; - #else - __asm volatile("MSR PSPLIM,%0" :: "r" (value)); - #endif - } - - __IAR_FT uint32_t __TZ_get_CONTROL_NS(void) - { - uint32_t res; - __asm volatile("MRS %0,CONTROL_NS" : "=r" (res)); - return res; - } - - __IAR_FT void __TZ_set_CONTROL_NS(uint32_t value) - { - __asm volatile("MSR CONTROL_NS,%0" :: "r" (value)); - } - - __IAR_FT uint32_t __TZ_get_PSP_NS(void) - { - uint32_t res; - __asm volatile("MRS %0,PSP_NS" : "=r" (res)); - return res; - } - - __IAR_FT void __TZ_set_PSP_NS(uint32_t value) - { - __asm volatile("MSR PSP_NS,%0" :: "r" (value)); - } - - __IAR_FT uint32_t __TZ_get_MSP_NS(void) - { - uint32_t res; - __asm volatile("MRS %0,MSP_NS" : "=r" (res)); - return res; - } - - __IAR_FT void __TZ_set_MSP_NS(uint32_t value) - { - __asm volatile("MSR MSP_NS,%0" :: "r" (value)); - } - - __IAR_FT uint32_t __TZ_get_SP_NS(void) - { - uint32_t res; - __asm volatile("MRS %0,SP_NS" : "=r" (res)); - return res; - } - __IAR_FT void __TZ_set_SP_NS(uint32_t value) - { - __asm volatile("MSR SP_NS,%0" :: "r" (value)); - } - - __IAR_FT uint32_t __TZ_get_PRIMASK_NS(void) - { - uint32_t res; - __asm volatile("MRS %0,PRIMASK_NS" : "=r" (res)); - return res; - } - - __IAR_FT void __TZ_set_PRIMASK_NS(uint32_t value) - { - __asm volatile("MSR PRIMASK_NS,%0" :: "r" (value)); - } - - __IAR_FT uint32_t __TZ_get_BASEPRI_NS(void) - { - uint32_t res; - __asm volatile("MRS %0,BASEPRI_NS" : "=r" (res)); - return res; - } - - __IAR_FT void __TZ_set_BASEPRI_NS(uint32_t value) - { - __asm volatile("MSR BASEPRI_NS,%0" :: "r" (value)); - } - - __IAR_FT uint32_t __TZ_get_FAULTMASK_NS(void) - { - uint32_t res; - __asm volatile("MRS %0,FAULTMASK_NS" : "=r" (res)); - return res; - } - - __IAR_FT void __TZ_set_FAULTMASK_NS(uint32_t value) - { - __asm volatile("MSR FAULTMASK_NS,%0" :: "r" (value)); - } - - __IAR_FT uint32_t __TZ_get_PSPLIM_NS(void) - { - uint32_t res; - #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure PSPLIM is RAZ/WI - res = 0U; - #else - __asm volatile("MRS %0,PSPLIM_NS" : "=r" (res)); - #endif - return res; - } - - __IAR_FT void __TZ_set_PSPLIM_NS(uint32_t value) - { - #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ - (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) - // without main extensions, the non-secure PSPLIM is RAZ/WI - (void)value; - #else - __asm volatile("MSR PSPLIM_NS,%0" :: "r" (value)); - #endif - } - - __IAR_FT uint32_t __TZ_get_MSPLIM_NS(void) - { - uint32_t res; - __asm volatile("MRS %0,MSPLIM_NS" : "=r" (res)); - return res; - } - - __IAR_FT void __TZ_set_MSPLIM_NS(uint32_t value) - { - __asm volatile("MSR MSPLIM_NS,%0" :: "r" (value)); - } - - #endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */ - -#endif /* __ICCARM_INTRINSICS_VERSION__ == 2 */ - -#define __BKPT(value) __asm volatile ("BKPT %0" : : "i"(value)) - -#if __IAR_M0_FAMILY - __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat) - { - if ((sat >= 1U) && (sat <= 32U)) - { - const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); - const int32_t min = -1 - max ; - if (val > max) - { - return max; - } - else if (val < min) - { - return min; - } - } - return val; - } - - __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat) - { - if (sat <= 31U) - { - const uint32_t max = ((1U << sat) - 1U); - if (val > (int32_t)max) - { - return max; - } - else if (val < 0) - { - return 0U; - } - } - return (uint32_t)val; - } -#endif - -#if (__CORTEX_M >= 0x03) /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */ - - __IAR_FT uint8_t __LDRBT(volatile uint8_t *addr) - { - uint32_t res; - __ASM("LDRBT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); - return ((uint8_t)res); - } - - __IAR_FT uint16_t __LDRHT(volatile uint16_t *addr) - { - uint32_t res; - __ASM("LDRHT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); - return ((uint16_t)res); - } - - __IAR_FT uint32_t __LDRT(volatile uint32_t *addr) - { - uint32_t res; - __ASM("LDRT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); - return res; - } - - __IAR_FT void __STRBT(uint8_t value, volatile uint8_t *addr) - { - __ASM("STRBT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); - } - - __IAR_FT void __STRHT(uint16_t value, volatile uint16_t *addr) - { - __ASM("STRHT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); - } - - __IAR_FT void __STRT(uint32_t value, volatile uint32_t *addr) - { - __ASM("STRT %1, [%0]" : : "r" (addr), "r" (value) : "memory"); - } - -#endif /* (__CORTEX_M >= 0x03) */ - -#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ - (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) - - - __IAR_FT uint8_t __LDAB(volatile uint8_t *ptr) - { - uint32_t res; - __ASM volatile ("LDAB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); - return ((uint8_t)res); - } - - __IAR_FT uint16_t __LDAH(volatile uint16_t *ptr) - { - uint32_t res; - __ASM volatile ("LDAH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); - return ((uint16_t)res); - } - - __IAR_FT uint32_t __LDA(volatile uint32_t *ptr) - { - uint32_t res; - __ASM volatile ("LDA %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); - return res; - } - - __IAR_FT void __STLB(uint8_t value, volatile uint8_t *ptr) - { - __ASM volatile ("STLB %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); - } - - __IAR_FT void __STLH(uint16_t value, volatile uint16_t *ptr) - { - __ASM volatile ("STLH %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); - } - - __IAR_FT void __STL(uint32_t value, volatile uint32_t *ptr) - { - __ASM volatile ("STL %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); - } - - __IAR_FT uint8_t __LDAEXB(volatile uint8_t *ptr) - { - uint32_t res; - __ASM volatile ("LDAEXB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); - return ((uint8_t)res); - } - - __IAR_FT uint16_t __LDAEXH(volatile uint16_t *ptr) - { - uint32_t res; - __ASM volatile ("LDAEXH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); - return ((uint16_t)res); - } - - __IAR_FT uint32_t __LDAEX(volatile uint32_t *ptr) - { - uint32_t res; - __ASM volatile ("LDAEX %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); - return res; - } - - __IAR_FT uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) - { - uint32_t res; - __ASM volatile ("STLEXB %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); - return res; - } - - __IAR_FT uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) - { - uint32_t res; - __ASM volatile ("STLEXH %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); - return res; - } - - __IAR_FT uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) - { - uint32_t res; - __ASM volatile ("STLEX %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); - return res; - } - -#endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */ - -#undef __IAR_FT -#undef __IAR_M0_FAMILY -#undef __ICCARM_V8 - -#pragma diag_default=Pe940 -#pragma diag_default=Pe177 - -#endif /* __CMSIS_ICCARM_H__ */ diff --git a/Drivers/core_armv8mbl.h b/Drivers/core_armv8mbl.h deleted file mode 100644 index ec76ab2..0000000 --- a/Drivers/core_armv8mbl.h +++ /dev/null @@ -1,1918 +0,0 @@ -/**************************************************************************//** - * @file core_armv8mbl.h - * @brief CMSIS Armv8-M Baseline Core Peripheral Access Layer Header File - * @version V5.0.7 - * @date 22. June 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_ARMV8MBL_H_GENERIC -#define __CORE_ARMV8MBL_H_GENERIC - -#include - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.
- Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
- Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.
- Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup Cortex_ARMv8MBL - @{ - */ - -#include "cmsis_version.h" - -/* CMSIS definitions */ -#define __ARMv8MBL_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ -#define __ARMv8MBL_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ -#define __ARMv8MBL_CMSIS_VERSION ((__ARMv8MBL_CMSIS_VERSION_MAIN << 16U) | \ - __ARMv8MBL_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ - -#define __CORTEX_M ( 2U) /*!< Cortex-M Core */ - -/** __FPU_USED indicates whether an FPU is used or not. - This core does not support an FPU at all -*/ -#define __FPU_USED 0U - -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TI_ARM__ ) - #if defined __TI_VFP_SUPPORT__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#endif - -#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_ARMV8MBL_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_ARMV8MBL_H_DEPENDANT -#define __CORE_ARMV8MBL_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __ARMv8MBL_REV - #define __ARMv8MBL_REV 0x0000U - #warning "__ARMv8MBL_REV not defined in device header file; using default!" - #endif - - #ifndef __FPU_PRESENT - #define __FPU_PRESENT 0U - #warning "__FPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0U - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __SAUREGION_PRESENT - #define __SAUREGION_PRESENT 0U - #warning "__SAUREGION_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __VTOR_PRESENT - #define __VTOR_PRESENT 0U - #warning "__VTOR_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 2U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif - - #ifndef __ETM_PRESENT - #define __ETM_PRESENT 0U - #warning "__ETM_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __MTB_PRESENT - #define __MTB_PRESENT 0U - #warning "__MTB_PRESENT not defined in device header file; using default!" - #endif - -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - IO Type Qualifiers are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group ARMv8MBL */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - - Core Debug Register - - Core MPU Register - - Core SAU Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ - uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ - uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ -#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[16U]; - __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[16U]; - __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[16U]; - __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[16U]; - __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ - uint32_t RESERVED4[16U]; - __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ - uint32_t RESERVED5[16U]; - __IOM uint32_t IPR[124U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ -} NVIC_Type; - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ -#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) - __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ -#else - uint32_t RESERVED0; -#endif - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - uint32_t RESERVED1; - __IOM uint32_t SHPR[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ -#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ - -#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ -#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ - -#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ -#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ -#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ -#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) -/* SCB Vector Table Offset Register Definitions */ -#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ -#endif - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ -#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ - -#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ -#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ - -#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ -#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ -#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ -#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ - -#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ -#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ - -#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ -#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ - -#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ -#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ - -#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ -#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ - -#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ -#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ -#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ -#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ - -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ -#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ - -#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ -#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ - -#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ -#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ - -#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ -#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ - -#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ -#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) - \brief Type definitions for the Data Watchpoint and Trace (DWT) - @{ - */ - -/** - \brief Structure type to access the Data Watchpoint and Trace Register (DWT). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ - uint32_t RESERVED0[6U]; - __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ - __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ - uint32_t RESERVED1[1U]; - __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ - uint32_t RESERVED2[1U]; - __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ - uint32_t RESERVED3[1U]; - __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ - uint32_t RESERVED4[1U]; - __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ - uint32_t RESERVED5[1U]; - __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ - uint32_t RESERVED6[1U]; - __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ - uint32_t RESERVED7[1U]; - __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ - uint32_t RESERVED8[1U]; - __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ - uint32_t RESERVED9[1U]; - __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ - uint32_t RESERVED10[1U]; - __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ - uint32_t RESERVED11[1U]; - __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ - uint32_t RESERVED12[1U]; - __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ - uint32_t RESERVED13[1U]; - __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ - uint32_t RESERVED14[1U]; - __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ - uint32_t RESERVED15[1U]; - __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ - uint32_t RESERVED16[1U]; - __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ - uint32_t RESERVED17[1U]; - __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ - uint32_t RESERVED18[1U]; - __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ - uint32_t RESERVED19[1U]; - __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ - uint32_t RESERVED20[1U]; - __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ - uint32_t RESERVED21[1U]; - __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ - uint32_t RESERVED22[1U]; - __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ - uint32_t RESERVED23[1U]; - __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ - uint32_t RESERVED24[1U]; - __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ - uint32_t RESERVED25[1U]; - __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ - uint32_t RESERVED26[1U]; - __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ - uint32_t RESERVED27[1U]; - __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ - uint32_t RESERVED28[1U]; - __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ - uint32_t RESERVED29[1U]; - __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ - uint32_t RESERVED30[1U]; - __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ - uint32_t RESERVED31[1U]; - __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ -} DWT_Type; - -/* DWT Control Register Definitions */ -#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ -#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ - -#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ -#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ - -#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ -#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ - -#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ -#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ - -#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ -#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ - -/* DWT Comparator Function Register Definitions */ -#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ -#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ - -#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ -#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ - -#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ -#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ - -#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ -#define DWT_FUNCTION_ACTION_Msk (0x3UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ - -#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ -#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ - -/*@}*/ /* end of group CMSIS_DWT */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_TPI Trace Port Interface (TPI) - \brief Type definitions for the Trace Port Interface (TPI) - @{ - */ - -/** - \brief Structure type to access the Trace Port Interface Register (TPI). - */ -typedef struct -{ - __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ - __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ - uint32_t RESERVED0[2U]; - __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ - uint32_t RESERVED1[55U]; - __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ - uint32_t RESERVED2[131U]; - __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ - __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ - __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ - uint32_t RESERVED3[809U]; - __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ - __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ - uint32_t RESERVED4[4U]; - __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ - __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ -} TPI_Type; - -/* TPI Asynchronous Clock Prescaler Register Definitions */ -#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ -#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ - -/* TPI Selected Pin Protocol Register Definitions */ -#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ -#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ - -/* TPI Formatter and Flush Status Register Definitions */ -#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ -#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ - -#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ -#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ - -#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ -#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ - -#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ -#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ - -/* TPI Formatter and Flush Control Register Definitions */ -#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ -#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ - -#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ -#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ - -#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ -#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ - -/* TPI Periodic Synchronization Control Register Definitions */ -#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ -#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ - -/* TPI Software Lock Status Register Definitions */ -#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ -#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ - -#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ -#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ - -#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ -#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ - -/* TPI DEVID Register Definitions */ -#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ -#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ - -#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ -#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ - -#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ -#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ - -#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ -#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ - -/* TPI DEVTYPE Register Definitions */ -#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ -#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ - -#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ -#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ - -/*@}*/ /* end of group CMSIS_TPI */ - - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_MPU Memory Protection Unit (MPU) - \brief Type definitions for the Memory Protection Unit (MPU) - @{ - */ - -/** - \brief Structure type to access the Memory Protection Unit (MPU). - */ -typedef struct -{ - __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ - uint32_t RESERVED0[7U]; - union { - __IOM uint32_t MAIR[2]; - struct { - __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ - __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ - }; - }; -} MPU_Type; - -#define MPU_TYPE_RALIASES 1U - -/* MPU Type Register Definitions */ -#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ - -#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ - -#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ - -/* MPU Control Register Definitions */ -#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ - -#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ - -#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ - -/* MPU Region Number Register Definitions */ -#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ - -/* MPU Region Base Address Register Definitions */ -#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ -#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ - -#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ -#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ - -#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ -#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ - -#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ -#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ - -/* MPU Region Limit Address Register Definitions */ -#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ -#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ - -#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ -#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ - -#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: EN Position */ -#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: EN Mask */ - -/* MPU Memory Attribute Indirection Register 0 Definitions */ -#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ -#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ - -#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ -#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ - -#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ -#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ - -#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ -#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ - -/* MPU Memory Attribute Indirection Register 1 Definitions */ -#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ -#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ - -#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ -#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ - -#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ -#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ - -#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ -#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ - -/*@} end of group CMSIS_MPU */ -#endif - - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SAU Security Attribution Unit (SAU) - \brief Type definitions for the Security Attribution Unit (SAU) - @{ - */ - -/** - \brief Structure type to access the Security Attribution Unit (SAU). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ - __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ -#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ - __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ -#endif -} SAU_Type; - -/* SAU Control Register Definitions */ -#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ -#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ - -#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ -#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ - -/* SAU Type Register Definitions */ -#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ -#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ - -#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) -/* SAU Region Number Register Definitions */ -#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ -#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ - -/* SAU Region Base Address Register Definitions */ -#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ -#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ - -/* SAU Region Limit Address Register Definitions */ -#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ -#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ - -#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ -#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ - -#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ -#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ - -#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ - -/*@} end of group CMSIS_SAU */ -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Type definitions for the Core Debug Registers - @{ - */ - -/** - \brief Structure type to access the Core Debug Register (CoreDebug). - */ -typedef struct -{ - __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ - __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ - __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ - __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ - uint32_t RESERVED4[1U]; - __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ - __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ -} CoreDebug_Type; - -/* Debug Halting Control and Status Register Definitions */ -#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ -#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ - -#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ -#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ - -#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ -#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ - -#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ - -#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ -#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ - -#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ -#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ - -#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ -#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ - -#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ -#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ - -#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ -#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ - -#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ -#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ - -#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ -#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ - -#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ -#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ - -/* Debug Core Register Selector Register Definitions */ -#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ -#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ - -#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ -#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ - -/* Debug Exception and Monitor Control Register */ -#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< CoreDebug DEMCR: DWTENA Position */ -#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< CoreDebug DEMCR: DWTENA Mask */ - -#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ -#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ - -#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ -#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ - -/* Debug Authentication Control Register Definitions */ -#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ -#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ - -#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ -#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ - -#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ -#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ - -#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ -#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ - -/* Debug Security Control and Status Register Definitions */ -#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ -#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ - -#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ -#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ - -#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ -#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ - -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. This parameter is interpreted as an uint32_t type. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Core Hardware */ - #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ - #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ - #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ - #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ - #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ - #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ - #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - - - #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ - #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ - #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ - #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ - #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ - #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ - - #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ - #endif - - #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) - #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ - #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ - #endif - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) - #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ - #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ - #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ - #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ - #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ - - #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ - #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ - #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ - #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ - - #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ - #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ - #endif - -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -#ifdef CMSIS_NVIC_VIRTUAL - #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE - #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" - #endif - #include CMSIS_NVIC_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping - #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping - #define NVIC_EnableIRQ __NVIC_EnableIRQ - #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ - #define NVIC_DisableIRQ __NVIC_DisableIRQ - #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ - #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ - #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ - #define NVIC_GetActive __NVIC_GetActive - #define NVIC_SetPriority __NVIC_SetPriority - #define NVIC_GetPriority __NVIC_GetPriority - #define NVIC_SystemReset __NVIC_SystemReset -#endif /* CMSIS_NVIC_VIRTUAL */ - -#ifdef CMSIS_VECTAB_VIRTUAL - #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE - #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" - #endif - #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetVector __NVIC_SetVector - #define NVIC_GetVector __NVIC_GetVector -#endif /* (CMSIS_VECTAB_VIRTUAL) */ - -#define NVIC_USER_IRQ_OFFSET 16 - - -/* Special LR values for Secure/Non-Secure call handling and exception handling */ - -/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ -#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ - -/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ -#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ -#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ -#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ -#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ -#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ -#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ -#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ - -/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ -#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ -#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ -#else -#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ -#endif - - -/* Interrupt Priorities are WORD accessible only under Armv6-M */ -/* The following MACROS handle generation of the register offset and byte masks */ -#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) -#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) -#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) - -#define __NVIC_SetPriorityGrouping(X) (void)(X) -#define __NVIC_GetPriorityGrouping() (0U) - -/** - \brief Enable Interrupt - \details Enables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status - \details Returns a device specific interrupt enable status from the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt - \details Disables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - __DSB(); - __ISB(); - } -} - - -/** - \brief Get Pending Interrupt - \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Active Interrupt - \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not active. - \return 1 Interrupt status is active. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \brief Get Interrupt Target State - \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 if interrupt is assigned to Secure - \return 1 if interrupt is assigned to Non Secure - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Interrupt Target State - \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 if interrupt is assigned to Secure - 1 if interrupt is assigned to Non Secure - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); - return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Clear Interrupt Target State - \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 if interrupt is assigned to Secure - 1 if interrupt is assigned to Non Secure - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); - return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - - -/** - \brief Set Interrupt Priority - \details Sets the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every processor exception. - */ -__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } - else - { - SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Encode Priority - \details Encodes the priority for an interrupt with the given priority group, - preemptive priority value, and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Used priority group. - \param [in] PreemptPriority Preemptive priority value (starting from 0). - \param [in] SubPriority Subpriority value (starting from 0). - \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). - */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - return ( - ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | - ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) - ); -} - - -/** - \brief Decode Priority - \details Decodes an interrupt priority value with a given priority group to - preemptive priority value and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). - \param [in] PriorityGroup Used priority group. - \param [out] pPreemptPriority Preemptive priority value (starting from 0). - \param [out] pSubPriority Subpriority value (starting from 0). - */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); - *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); -} - - -/** - \brief Set Interrupt Vector - \details Sets an interrupt vector in SRAM based interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - VTOR must been relocated to SRAM before. - If VTOR is not present address 0 must be mapped to SRAM. - \param [in] IRQn Interrupt number - \param [in] vector Address of interrupt handler function - */ -__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) -{ -#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) - uint32_t *vectors = (uint32_t *)SCB->VTOR; -#else - uint32_t *vectors = (uint32_t *)0x0U; -#endif - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; -} - - -/** - \brief Get Interrupt Vector - \details Reads an interrupt vector from interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Address of interrupt handler function - */ -__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) -{ -#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) - uint32_t *vectors = (uint32_t *)SCB->VTOR; -#else - uint32_t *vectors = (uint32_t *)0x0U; -#endif - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - SCB_AIRCR_SYSRESETREQ_Msk); - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \brief Enable Interrupt (non-secure) - \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status (non-secure) - \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt (non-secure) - \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Pending Interrupt (non-secure) - \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt (non-secure) - \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt (non-secure) - \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Active Interrupt (non-secure) - \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not active. - \return 1 Interrupt status is active. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Interrupt Priority (non-secure) - \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every non-secure processor exception. - */ -__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } - else - { - SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } -} - - -/** - \brief Get Interrupt Priority (non-secure) - \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } -} -#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ - -/*@} end of CMSIS_Core_NVICFunctions */ - -/* ########################## MPU functions #################################### */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - -#include "mpu_armv8.h" - -#endif - -/* ########################## FPU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_FpuFunctions FPU Functions - \brief Function that provides FPU type. - @{ - */ - -/** - \brief get FPU type - \details returns the FPU type - \returns - - \b 0: No FPU - - \b 1: Single precision FPU - - \b 2: Double + Single precision FPU - */ -__STATIC_INLINE uint32_t SCB_GetFPUType(void) -{ - return 0U; /* No FPU */ -} - - -/*@} end of CMSIS_Core_FpuFunctions */ - - - -/* ########################## SAU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SAUFunctions SAU Functions - \brief Functions that configure the SAU. - @{ - */ - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) - -/** - \brief Enable SAU - \details Enables the Security Attribution Unit (SAU). - */ -__STATIC_INLINE void TZ_SAU_Enable(void) -{ - SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); -} - - - -/** - \brief Disable SAU - \details Disables the Security Attribution Unit (SAU). - */ -__STATIC_INLINE void TZ_SAU_Disable(void) -{ - SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); -} - -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - -/*@} end of CMSIS_Core_SAUFunctions */ - - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function SysTick_Config is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \brief System Tick Configuration (non-secure) - \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function TZ_SysTick_Config_NS is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - - */ -__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_ARMV8MBL_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/core_armv8mml.h b/Drivers/core_armv8mml.h deleted file mode 100644 index 2d0f106..0000000 --- a/Drivers/core_armv8mml.h +++ /dev/null @@ -1,2927 +0,0 @@ -/**************************************************************************//** - * @file core_armv8mml.h - * @brief CMSIS Armv8-M Mainline Core Peripheral Access Layer Header File - * @version V5.0.7 - * @date 06. July 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_ARMV8MML_H_GENERIC -#define __CORE_ARMV8MML_H_GENERIC - -#include - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.
- Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
- Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.
- Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup Cortex_ARMv8MML - @{ - */ - -#include "cmsis_version.h" - -/* CMSIS Armv8MML definitions */ -#define __ARMv8MML_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ -#define __ARMv8MML_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ -#define __ARMv8MML_CMSIS_VERSION ((__ARMv8MML_CMSIS_VERSION_MAIN << 16U) | \ - __ARMv8MML_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ - -#define __CORTEX_M (81U) /*!< Cortex-M Core */ - -/** __FPU_USED indicates whether an FPU is used or not. - For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. -*/ -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - - #if defined(__ARM_FEATURE_DSP) - #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) - #define __DSP_USED 1U - #else - #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" - #define __DSP_USED 0U - #endif - #else - #define __DSP_USED 0U - #endif - -#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - - #if defined(__ARM_FEATURE_DSP) - #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) - #define __DSP_USED 1U - #else - #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" - #define __DSP_USED 0U - #endif - #else - #define __DSP_USED 0U - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - - #if defined(__ARM_FEATURE_DSP) - #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) - #define __DSP_USED 1U - #else - #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" - #define __DSP_USED 0U - #endif - #else - #define __DSP_USED 0U - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - - #if defined(__ARM_FEATURE_DSP) - #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) - #define __DSP_USED 1U - #else - #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" - #define __DSP_USED 0U - #endif - #else - #define __DSP_USED 0U - #endif - -#elif defined ( __TI_ARM__ ) - #if defined __TI_VFP_SUPPORT__ - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#endif - -#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_ARMV8MML_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_ARMV8MML_H_DEPENDANT -#define __CORE_ARMV8MML_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __ARMv8MML_REV - #define __ARMv8MML_REV 0x0000U - #warning "__ARMv8MML_REV not defined in device header file; using default!" - #endif - - #ifndef __FPU_PRESENT - #define __FPU_PRESENT 0U - #warning "__FPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0U - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __SAUREGION_PRESENT - #define __SAUREGION_PRESENT 0U - #warning "__SAUREGION_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __DSP_PRESENT - #define __DSP_PRESENT 0U - #warning "__DSP_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 3U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - IO Type Qualifiers are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group ARMv8MML */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - - Core Debug Register - - Core MPU Register - - Core SAU Register - - Core FPU Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - -#define APSR_Q_Pos 27U /*!< APSR: Q Position */ -#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ - -#define APSR_GE_Pos 16U /*!< APSR: GE Position */ -#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ -#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ - -#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ -#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ -#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ - uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ - uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ - uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ - uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ -#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ - -#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ -#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ - -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ -#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[16U]; - __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[16U]; - __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[16U]; - __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[16U]; - __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ - uint32_t RESERVED4[16U]; - __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ - uint32_t RESERVED5[16U]; - __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ - uint32_t RESERVED6[580U]; - __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ -} NVIC_Type; - -/* Software Triggered Interrupt Register Definitions */ -#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ -#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ - __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ - __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ - __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ - __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ - __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ - __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ - __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ - __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ - __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ - __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ - __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ - __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ - __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ - __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ - __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ - __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ - __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ - uint32_t RESERVED3[92U]; - __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ - uint32_t RESERVED4[15U]; - __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ - __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ - __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ - uint32_t RESERVED5[1U]; - __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ - uint32_t RESERVED6[1U]; - __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ - __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ - __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ - __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ - __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ - __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ - __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ - __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ - uint32_t RESERVED7[6U]; - __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ - __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ - __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ - __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ - __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ - uint32_t RESERVED8[1U]; - __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ -#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ - -#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ -#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ - -#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ -#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ -#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ -#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -/* SCB Vector Table Offset Register Definitions */ -#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ -#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ - -#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ -#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ - -#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ -#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ - -#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ -#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ -#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ -#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ - -#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ -#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ - -#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ -#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ - -#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ -#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ - -#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ -#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ - -#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ -#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ -#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ -#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ - -#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ -#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ - -#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ -#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ - -#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ -#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ - -#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ -#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ - -#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ -#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ - -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ -#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ - -#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ -#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ - -#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ -#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ - -#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ -#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ - -#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ -#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ - -#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ -#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ - -#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ -#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ - -#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ -#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ - -#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ -#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ - -#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ -#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ - -#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ -#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ - -#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ -#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ - -#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ -#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ - -/* SCB Configurable Fault Status Register Definitions */ -#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ -#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ - -#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ -#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ - -#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ -#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ - -/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ -#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ - -#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ -#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ - -#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ -#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ - -#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ -#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ - -#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ -#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ - -#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ -#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ - -/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ -#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ - -#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ -#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ - -#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ -#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ - -#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ -#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ - -#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ -#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ - -#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ -#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ - -#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ -#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ - -/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ -#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ - -#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ -#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ - -#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ -#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ - -#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ -#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ - -#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ -#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ - -#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ -#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ - -#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ -#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ - -/* SCB Hard Fault Status Register Definitions */ -#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ -#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ - -#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ -#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ - -#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ -#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ - -/* SCB Debug Fault Status Register Definitions */ -#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ -#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ - -#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ -#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ - -#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ -#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ - -#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ -#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ - -#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ -#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ - -/* SCB Non-Secure Access Control Register Definitions */ -#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ -#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ - -#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ -#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ - -#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ -#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ - -/* SCB Cache Level ID Register Definitions */ -#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ -#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ - -#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ -#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ - -/* SCB Cache Type Register Definitions */ -#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ -#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ - -#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ -#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ - -#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ -#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ - -#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ -#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ - -#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ -#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ - -/* SCB Cache Size ID Register Definitions */ -#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ -#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ - -#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ -#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ - -#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ -#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ - -#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ -#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ - -#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ -#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ - -#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ -#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ - -#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ -#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ - -/* SCB Cache Size Selection Register Definitions */ -#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ -#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ - -#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ -#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ - -/* SCB Software Triggered Interrupt Register Definitions */ -#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ -#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ - -/* SCB D-Cache Invalidate by Set-way Register Definitions */ -#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ -#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ - -#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ -#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ - -/* SCB D-Cache Clean by Set-way Register Definitions */ -#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ -#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ - -#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ -#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ - -/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ -#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ -#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ - -#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ -#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ - -/* Instruction Tightly-Coupled Memory Control Register Definitions */ -#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ -#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ - -#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ -#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ - -#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ -#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ - -#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ -#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ - -/* Data Tightly-Coupled Memory Control Register Definitions */ -#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ -#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ - -#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ -#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ - -#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ -#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ - -#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ -#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ - -/* AHBP Control Register Definitions */ -#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ -#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ - -#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ -#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ - -/* L1 Cache Control Register Definitions */ -#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ -#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ - -#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ -#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ - -#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ -#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ - -/* AHBS Control Register Definitions */ -#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ -#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ - -#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ -#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ - -#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ -#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ - -/* Auxiliary Bus Fault Status Register Definitions */ -#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ -#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ - -#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ -#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ - -#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ -#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ - -#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ -#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ - -#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ -#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ - -#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ -#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) - \brief Type definitions for the System Control and ID Register not in the SCB - @{ - */ - -/** - \brief Structure type to access the System Control and ID Register not in the SCB. - */ -typedef struct -{ - uint32_t RESERVED0[1U]; - __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ - __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ - __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ -} SCnSCB_Type; - -/* Interrupt Controller Type Register Definitions */ -#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ -#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ - -/*@} end of group CMSIS_SCnotSCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) - \brief Type definitions for the Instrumentation Trace Macrocell (ITM) - @{ - */ - -/** - \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). - */ -typedef struct -{ - __OM union - { - __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ - __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ - __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ - } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ - uint32_t RESERVED0[864U]; - __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ - uint32_t RESERVED1[15U]; - __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ - uint32_t RESERVED2[15U]; - __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29U]; - __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ - uint32_t RESERVED4[43U]; - __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ - __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ - uint32_t RESERVED5[1U]; - __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ - uint32_t RESERVED6[4U]; - __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ - __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ - __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ - __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ - __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ - __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ - __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ - __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ - __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ - __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ - __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ - __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ -} ITM_Type; - -/* ITM Stimulus Port Register Definitions */ -#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ -#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ - -#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ -#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ - -/* ITM Trace Privilege Register Definitions */ -#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ -#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ - -/* ITM Trace Control Register Definitions */ -#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ -#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ - -#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ -#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ - -#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ -#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ - -#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ -#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ - -#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ -#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ - -#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ -#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ - -#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ -#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ - -#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ -#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ - -#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ -#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ - -#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ -#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ - -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ - -/* ITM Lock Status Register Definitions */ -#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ -#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ - -#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ -#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ - -#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ -#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ - -/*@}*/ /* end of group CMSIS_ITM */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) - \brief Type definitions for the Data Watchpoint and Trace (DWT) - @{ - */ - -/** - \brief Structure type to access the Data Watchpoint and Trace Register (DWT). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ - __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ - __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ - __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ - __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ - __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ - __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ - __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ - __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ - uint32_t RESERVED1[1U]; - __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ - uint32_t RESERVED2[1U]; - __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ - uint32_t RESERVED3[1U]; - __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ - uint32_t RESERVED4[1U]; - __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ - uint32_t RESERVED5[1U]; - __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ - uint32_t RESERVED6[1U]; - __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ - uint32_t RESERVED7[1U]; - __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ - uint32_t RESERVED8[1U]; - __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ - uint32_t RESERVED9[1U]; - __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ - uint32_t RESERVED10[1U]; - __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ - uint32_t RESERVED11[1U]; - __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ - uint32_t RESERVED12[1U]; - __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ - uint32_t RESERVED13[1U]; - __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ - uint32_t RESERVED14[1U]; - __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ - uint32_t RESERVED15[1U]; - __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ - uint32_t RESERVED16[1U]; - __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ - uint32_t RESERVED17[1U]; - __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ - uint32_t RESERVED18[1U]; - __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ - uint32_t RESERVED19[1U]; - __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ - uint32_t RESERVED20[1U]; - __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ - uint32_t RESERVED21[1U]; - __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ - uint32_t RESERVED22[1U]; - __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ - uint32_t RESERVED23[1U]; - __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ - uint32_t RESERVED24[1U]; - __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ - uint32_t RESERVED25[1U]; - __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ - uint32_t RESERVED26[1U]; - __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ - uint32_t RESERVED27[1U]; - __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ - uint32_t RESERVED28[1U]; - __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ - uint32_t RESERVED29[1U]; - __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ - uint32_t RESERVED30[1U]; - __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ - uint32_t RESERVED31[1U]; - __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ - uint32_t RESERVED32[934U]; - __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ - uint32_t RESERVED33[1U]; - __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ -} DWT_Type; - -/* DWT Control Register Definitions */ -#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ -#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ - -#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ -#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ - -#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ -#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ - -#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ -#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ - -#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ -#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ - -#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ -#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ - -#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ -#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ - -#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ -#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ - -#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ -#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ - -#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ -#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ - -#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ -#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ - -#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ -#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ - -#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ -#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ - -#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ -#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ - -#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ -#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ - -#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ -#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ - -#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ -#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ - -#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ -#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ - -#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ -#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ - -/* DWT CPI Count Register Definitions */ -#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ -#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ - -/* DWT Exception Overhead Count Register Definitions */ -#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ -#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ - -/* DWT Sleep Count Register Definitions */ -#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ -#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ - -/* DWT LSU Count Register Definitions */ -#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ -#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ - -/* DWT Folded-instruction Count Register Definitions */ -#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ -#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ - -/* DWT Comparator Function Register Definitions */ -#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ -#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ - -#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ -#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ - -#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ -#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ - -#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ -#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ - -#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ -#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ - -/*@}*/ /* end of group CMSIS_DWT */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_TPI Trace Port Interface (TPI) - \brief Type definitions for the Trace Port Interface (TPI) - @{ - */ - -/** - \brief Structure type to access the Trace Port Interface Register (TPI). - */ -typedef struct -{ - __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ - __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ - uint32_t RESERVED0[2U]; - __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ - uint32_t RESERVED1[55U]; - __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ - uint32_t RESERVED2[131U]; - __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ - __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ - __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ - uint32_t RESERVED3[809U]; - __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ - __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ - uint32_t RESERVED4[4U]; - __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ - __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ -} TPI_Type; - -/* TPI Asynchronous Clock Prescaler Register Definitions */ -#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ -#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ - -/* TPI Selected Pin Protocol Register Definitions */ -#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ -#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ - -/* TPI Formatter and Flush Status Register Definitions */ -#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ -#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ - -#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ -#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ - -#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ -#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ - -#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ -#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ - -/* TPI Formatter and Flush Control Register Definitions */ -#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ -#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ - -#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ -#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ - -#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ -#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ - -/* TPI Periodic Synchronization Control Register Definitions */ -#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ -#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ - -/* TPI Software Lock Status Register Definitions */ -#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ -#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ - -#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ -#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ - -#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ -#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ - -/* TPI DEVID Register Definitions */ -#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ -#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ - -#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ -#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ - -#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ -#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ - -#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ -#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ - -/* TPI DEVTYPE Register Definitions */ -#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ -#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ - -#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ -#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ - -/*@}*/ /* end of group CMSIS_TPI */ - - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_MPU Memory Protection Unit (MPU) - \brief Type definitions for the Memory Protection Unit (MPU) - @{ - */ - -/** - \brief Structure type to access the Memory Protection Unit (MPU). - */ -typedef struct -{ - __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ - __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ - __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ - __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ - __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ - __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ - __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ - uint32_t RESERVED0[1]; - union { - __IOM uint32_t MAIR[2]; - struct { - __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ - __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ - }; - }; -} MPU_Type; - -#define MPU_TYPE_RALIASES 4U - -/* MPU Type Register Definitions */ -#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ - -#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ - -#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ - -/* MPU Control Register Definitions */ -#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ - -#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ - -#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ - -/* MPU Region Number Register Definitions */ -#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ - -/* MPU Region Base Address Register Definitions */ -#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ -#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ - -#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ -#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ - -#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ -#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ - -#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ -#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ - -/* MPU Region Limit Address Register Definitions */ -#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ -#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ - -#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ -#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ - -#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ -#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ - -/* MPU Memory Attribute Indirection Register 0 Definitions */ -#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ -#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ - -#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ -#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ - -#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ -#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ - -#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ -#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ - -/* MPU Memory Attribute Indirection Register 1 Definitions */ -#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ -#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ - -#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ -#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ - -#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ -#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ - -#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ -#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ - -/*@} end of group CMSIS_MPU */ -#endif - - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SAU Security Attribution Unit (SAU) - \brief Type definitions for the Security Attribution Unit (SAU) - @{ - */ - -/** - \brief Structure type to access the Security Attribution Unit (SAU). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ - __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ -#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ - __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ -#else - uint32_t RESERVED0[3]; -#endif - __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ - __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ -} SAU_Type; - -/* SAU Control Register Definitions */ -#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ -#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ - -#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ -#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ - -/* SAU Type Register Definitions */ -#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ -#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ - -#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) -/* SAU Region Number Register Definitions */ -#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ -#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ - -/* SAU Region Base Address Register Definitions */ -#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ -#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ - -/* SAU Region Limit Address Register Definitions */ -#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ -#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ - -#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ -#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ - -#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ -#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ - -#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ - -/* Secure Fault Status Register Definitions */ -#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ -#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ - -#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ -#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ - -#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ -#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ - -#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ -#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ - -#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ -#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ - -#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ -#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ - -#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ -#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ - -#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ -#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ - -/*@} end of group CMSIS_SAU */ -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_FPU Floating Point Unit (FPU) - \brief Type definitions for the Floating Point Unit (FPU) - @{ - */ - -/** - \brief Structure type to access the Floating Point Unit (FPU). - */ -typedef struct -{ - uint32_t RESERVED0[1U]; - __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ - __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ - __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ - __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ - __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ -} FPU_Type; - -/* Floating-Point Context Control Register Definitions */ -#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ -#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ - -#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ -#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ - -#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ -#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ - -#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ -#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ - -#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ -#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ - -#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ -#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ - -#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ -#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ - -#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ -#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ - -#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ -#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ - -#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ -#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ - -#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ -#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ - -#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ -#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ - -#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ -#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ - -#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ -#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ - -#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ -#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ - -#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ -#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ - -#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ -#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ - -/* Floating-Point Context Address Register Definitions */ -#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ -#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ - -/* Floating-Point Default Status Control Register Definitions */ -#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ -#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ - -#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ -#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ - -#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ -#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ - -#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ -#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ - -/* Media and FP Feature Register 0 Definitions */ -#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ -#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ - -#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ -#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ - -#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ -#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ - -#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ -#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ - -#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ -#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ - -#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ -#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ - -#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ -#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ - -#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ -#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ - -/* Media and FP Feature Register 1 Definitions */ -#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ -#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ - -#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ -#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ - -#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ -#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ - -#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ -#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ - -/*@} end of group CMSIS_FPU */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Type definitions for the Core Debug Registers - @{ - */ - -/** - \brief Structure type to access the Core Debug Register (CoreDebug). - */ -typedef struct -{ - __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ - __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ - __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ - __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ - uint32_t RESERVED4[1U]; - __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ - __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ -} CoreDebug_Type; - -/* Debug Halting Control and Status Register Definitions */ -#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ -#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ - -#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ -#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ - -#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ -#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ - -#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ - -#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ -#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ - -#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ -#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ - -#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ -#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ - -#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ -#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ - -#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ -#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ - -#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ -#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ - -#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ -#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ - -#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ -#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ - -#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ -#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ - -/* Debug Core Register Selector Register Definitions */ -#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ -#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ - -#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ -#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ - -/* Debug Exception and Monitor Control Register Definitions */ -#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ -#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ - -#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ -#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ - -#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ -#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ - -#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ -#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ - -#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ -#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ - -#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ -#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ - -#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ -#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ - -#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ -#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ - -#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ -#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ - -#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ -#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ - -#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ -#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ - -#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ -#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ - -#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ -#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ - -/* Debug Authentication Control Register Definitions */ -#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ -#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ - -#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ -#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ - -#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ -#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ - -#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ -#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ - -/* Debug Security Control and Status Register Definitions */ -#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ -#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ - -#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ -#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ - -#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ -#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ - -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. This parameter is interpreted as an uint32_t type. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Core Hardware */ - #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ - #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ - #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ - #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ - #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ - #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ - #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ - #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - - #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ - #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ - #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ - #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ - #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ - #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ - #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ - #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ - - #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ - #endif - - #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) - #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ - #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ - #endif - - #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ - #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) - #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ - #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ - #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ - #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ - #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ - - #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ - #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ - #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ - #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ - #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ - - #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ - #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ - #endif - - #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ - #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ - -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Debug Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -#ifdef CMSIS_NVIC_VIRTUAL - #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE - #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" - #endif - #include CMSIS_NVIC_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping - #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping - #define NVIC_EnableIRQ __NVIC_EnableIRQ - #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ - #define NVIC_DisableIRQ __NVIC_DisableIRQ - #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ - #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ - #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ - #define NVIC_GetActive __NVIC_GetActive - #define NVIC_SetPriority __NVIC_SetPriority - #define NVIC_GetPriority __NVIC_GetPriority - #define NVIC_SystemReset __NVIC_SystemReset -#endif /* CMSIS_NVIC_VIRTUAL */ - -#ifdef CMSIS_VECTAB_VIRTUAL - #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE - #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" - #endif - #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetVector __NVIC_SetVector - #define NVIC_GetVector __NVIC_GetVector -#endif /* (CMSIS_VECTAB_VIRTUAL) */ - -#define NVIC_USER_IRQ_OFFSET 16 - - -/* Special LR values for Secure/Non-Secure call handling and exception handling */ - -/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ -#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ - -/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ -#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ -#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ -#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ -#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ -#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ -#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ -#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ - -/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ -#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ -#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ -#else -#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ -#endif - - -/** - \brief Set Priority Grouping - \details Sets the priority grouping field using the required unlock sequence. - The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. - Only values from 0..7 are used. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Priority grouping field. - */ -__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) -{ - uint32_t reg_value; - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - - reg_value = SCB->AIRCR; /* read old register configuration */ - reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ - reg_value = (reg_value | - ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ - SCB->AIRCR = reg_value; -} - - -/** - \brief Get Priority Grouping - \details Reads the priority grouping field from the NVIC Interrupt Controller. - \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). - */ -__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) -{ - return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); -} - - -/** - \brief Enable Interrupt - \details Enables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status - \details Returns a device specific interrupt enable status from the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt - \details Disables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - __DSB(); - __ISB(); - } -} - - -/** - \brief Get Pending Interrupt - \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Active Interrupt - \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not active. - \return 1 Interrupt status is active. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \brief Get Interrupt Target State - \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 if interrupt is assigned to Secure - \return 1 if interrupt is assigned to Non Secure - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Interrupt Target State - \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 if interrupt is assigned to Secure - 1 if interrupt is assigned to Non Secure - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); - return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Clear Interrupt Target State - \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 if interrupt is assigned to Secure - 1 if interrupt is assigned to Non Secure - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); - return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - - -/** - \brief Set Interrupt Priority - \details Sets the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every processor exception. - */ -__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } - else - { - SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Encode Priority - \details Encodes the priority for an interrupt with the given priority group, - preemptive priority value, and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Used priority group. - \param [in] PreemptPriority Preemptive priority value (starting from 0). - \param [in] SubPriority Subpriority value (starting from 0). - \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). - */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - return ( - ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | - ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) - ); -} - - -/** - \brief Decode Priority - \details Decodes an interrupt priority value with a given priority group to - preemptive priority value and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). - \param [in] PriorityGroup Used priority group. - \param [out] pPreemptPriority Preemptive priority value (starting from 0). - \param [out] pSubPriority Subpriority value (starting from 0). - */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); - *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); -} - - -/** - \brief Set Interrupt Vector - \details Sets an interrupt vector in SRAM based interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - VTOR must been relocated to SRAM before. - \param [in] IRQn Interrupt number - \param [in] vector Address of interrupt handler function - */ -__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) -{ - uint32_t *vectors = (uint32_t *)SCB->VTOR; - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; -} - - -/** - \brief Get Interrupt Vector - \details Reads an interrupt vector from interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Address of interrupt handler function - */ -__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) -{ - uint32_t *vectors = (uint32_t *)SCB->VTOR; - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | - SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \brief Set Priority Grouping (non-secure) - \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. - The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. - Only values from 0..7 are used. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Priority grouping field. - */ -__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) -{ - uint32_t reg_value; - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - - reg_value = SCB_NS->AIRCR; /* read old register configuration */ - reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ - reg_value = (reg_value | - ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ - SCB_NS->AIRCR = reg_value; -} - - -/** - \brief Get Priority Grouping (non-secure) - \details Reads the priority grouping field from the non-secure NVIC when in secure state. - \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) -{ - return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); -} - - -/** - \brief Enable Interrupt (non-secure) - \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status (non-secure) - \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt (non-secure) - \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Pending Interrupt (non-secure) - \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt (non-secure) - \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt (non-secure) - \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Active Interrupt (non-secure) - \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not active. - \return 1 Interrupt status is active. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Interrupt Priority (non-secure) - \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every non-secure processor exception. - */ -__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } - else - { - SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } -} - - -/** - \brief Get Interrupt Priority (non-secure) - \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); - } -} -#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ - -/*@} end of CMSIS_Core_NVICFunctions */ - -/* ########################## MPU functions #################################### */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - -#include "mpu_armv8.h" - -#endif - -/* ########################## FPU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_FpuFunctions FPU Functions - \brief Function that provides FPU type. - @{ - */ - -/** - \brief get FPU type - \details returns the FPU type - \returns - - \b 0: No FPU - - \b 1: Single precision FPU - - \b 2: Double + Single precision FPU - */ -__STATIC_INLINE uint32_t SCB_GetFPUType(void) -{ - uint32_t mvfr0; - - mvfr0 = FPU->MVFR0; - if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) - { - return 2U; /* Double + Single precision FPU */ - } - else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) - { - return 1U; /* Single precision FPU */ - } - else - { - return 0U; /* No FPU */ - } -} - - -/*@} end of CMSIS_Core_FpuFunctions */ - - - -/* ########################## SAU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SAUFunctions SAU Functions - \brief Functions that configure the SAU. - @{ - */ - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) - -/** - \brief Enable SAU - \details Enables the Security Attribution Unit (SAU). - */ -__STATIC_INLINE void TZ_SAU_Enable(void) -{ - SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); -} - - - -/** - \brief Disable SAU - \details Disables the Security Attribution Unit (SAU). - */ -__STATIC_INLINE void TZ_SAU_Disable(void) -{ - SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); -} - -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - -/*@} end of CMSIS_Core_SAUFunctions */ - - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function SysTick_Config is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \brief System Tick Configuration (non-secure) - \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function TZ_SysTick_Config_NS is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - - */ -__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - -/* ##################################### Debug In/Output function ########################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_core_DebugFunctions ITM Functions - \brief Functions that access the ITM debug interface. - @{ - */ - -extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ -#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ - - -/** - \brief ITM Send Character - \details Transmits a character via the ITM channel 0, and - \li Just returns when no debugger is connected that has booked the output. - \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. - \param [in] ch Character to transmit. - \returns Character to transmit. - */ -__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) -{ - if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ - ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ - { - while (ITM->PORT[0U].u32 == 0UL) - { - __NOP(); - } - ITM->PORT[0U].u8 = (uint8_t)ch; - } - return (ch); -} - - -/** - \brief ITM Receive Character - \details Inputs a character via the external variable \ref ITM_RxBuffer. - \return Received character. - \return -1 No character pending. - */ -__STATIC_INLINE int32_t ITM_ReceiveChar (void) -{ - int32_t ch = -1; /* no character available */ - - if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) - { - ch = ITM_RxBuffer; - ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ - } - - return (ch); -} - - -/** - \brief ITM Check Character - \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. - \return 0 No character available. - \return 1 Character available. - */ -__STATIC_INLINE int32_t ITM_CheckChar (void) -{ - - if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) - { - return (0); /* no character available */ - } - else - { - return (1); /* character available */ - } -} - -/*@} end of CMSIS_core_DebugFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_ARMV8MML_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/core_cm0.h b/Drivers/core_cm0.h deleted file mode 100644 index 6f82227..0000000 --- a/Drivers/core_cm0.h +++ /dev/null @@ -1,949 +0,0 @@ -/**************************************************************************//** - * @file core_cm0.h - * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File - * @version V5.0.5 - * @date 28. May 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_CM0_H_GENERIC -#define __CORE_CM0_H_GENERIC - -#include - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.
- Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
- Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.
- Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup Cortex_M0 - @{ - */ - -#include "cmsis_version.h" - -/* CMSIS CM0 definitions */ -#define __CM0_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ -#define __CM0_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ -#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16U) | \ - __CM0_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ - -#define __CORTEX_M (0U) /*!< Cortex-M Core */ - -/** __FPU_USED indicates whether an FPU is used or not. - This core does not support an FPU at all -*/ -#define __FPU_USED 0U - -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TI_ARM__ ) - #if defined __TI_VFP_SUPPORT__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#endif - -#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM0_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_CM0_H_DEPENDANT -#define __CORE_CM0_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __CM0_REV - #define __CM0_REV 0x0000U - #warning "__CM0_REV not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 2U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - IO Type Qualifiers are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group Cortex_M0 */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t _reserved0:1; /*!< bit: 0 Reserved */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[31U]; - __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[31U]; - __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[31U]; - __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[31U]; - uint32_t RESERVED4[64U]; - __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ -} NVIC_Type; - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - uint32_t RESERVED0; - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - uint32_t RESERVED1; - __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. - Therefore they are not covered by the Cortex-M0 header file. - @{ - */ -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. This parameter is interpreted as an uint32_t type. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Core Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ - - -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -#ifdef CMSIS_NVIC_VIRTUAL - #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE - #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" - #endif - #include CMSIS_NVIC_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping - #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping - #define NVIC_EnableIRQ __NVIC_EnableIRQ - #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ - #define NVIC_DisableIRQ __NVIC_DisableIRQ - #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ - #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ - #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ -/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0 */ - #define NVIC_SetPriority __NVIC_SetPriority - #define NVIC_GetPriority __NVIC_GetPriority - #define NVIC_SystemReset __NVIC_SystemReset -#endif /* CMSIS_NVIC_VIRTUAL */ - -#ifdef CMSIS_VECTAB_VIRTUAL - #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE - #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" - #endif - #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetVector __NVIC_SetVector - #define NVIC_GetVector __NVIC_GetVector -#endif /* (CMSIS_VECTAB_VIRTUAL) */ - -#define NVIC_USER_IRQ_OFFSET 16 - - -/* The following EXC_RETURN values are saved the LR on exception entry */ -#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ -#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ -#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ - - -/* Interrupt Priorities are WORD accessible only under Armv6-M */ -/* The following MACROS handle generation of the register offset and byte masks */ -#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) -#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) -#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) - -#define __NVIC_SetPriorityGrouping(X) (void)(X) -#define __NVIC_GetPriorityGrouping() (0U) - -/** - \brief Enable Interrupt - \details Enables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status - \details Returns a device specific interrupt enable status from the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt - \details Disables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - __DSB(); - __ISB(); - } -} - - -/** - \brief Get Pending Interrupt - \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Set Interrupt Priority - \details Sets the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every processor exception. - */ -__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } - else - { - SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Encode Priority - \details Encodes the priority for an interrupt with the given priority group, - preemptive priority value, and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Used priority group. - \param [in] PreemptPriority Preemptive priority value (starting from 0). - \param [in] SubPriority Subpriority value (starting from 0). - \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). - */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - return ( - ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | - ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) - ); -} - - -/** - \brief Decode Priority - \details Decodes an interrupt priority value with a given priority group to - preemptive priority value and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). - \param [in] PriorityGroup Used priority group. - \param [out] pPreemptPriority Preemptive priority value (starting from 0). - \param [out] pSubPriority Subpriority value (starting from 0). - */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); - *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); -} - - - -/** - \brief Set Interrupt Vector - \details Sets an interrupt vector in SRAM based interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - Address 0 must be mapped to SRAM. - \param [in] IRQn Interrupt number - \param [in] vector Address of interrupt handler function - */ -__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) -{ - uint32_t *vectors = (uint32_t *)0x0U; - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; -} - - -/** - \brief Get Interrupt Vector - \details Reads an interrupt vector from interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Address of interrupt handler function - */ -__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) -{ - uint32_t *vectors = (uint32_t *)0x0U; - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - SCB_AIRCR_SYSRESETREQ_Msk); - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -/*@} end of CMSIS_Core_NVICFunctions */ - - -/* ########################## FPU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_FpuFunctions FPU Functions - \brief Function that provides FPU type. - @{ - */ - -/** - \brief get FPU type - \details returns the FPU type - \returns - - \b 0: No FPU - - \b 1: Single precision FPU - - \b 2: Double + Single precision FPU - */ -__STATIC_INLINE uint32_t SCB_GetFPUType(void) -{ - return 0U; /* No FPU */ -} - - -/*@} end of CMSIS_Core_FpuFunctions */ - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function SysTick_Config is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM0_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/core_cm0plus.h b/Drivers/core_cm0plus.h deleted file mode 100644 index b9377e8..0000000 --- a/Drivers/core_cm0plus.h +++ /dev/null @@ -1,1083 +0,0 @@ -/**************************************************************************//** - * @file core_cm0plus.h - * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File - * @version V5.0.6 - * @date 28. May 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_CM0PLUS_H_GENERIC -#define __CORE_CM0PLUS_H_GENERIC - -#include - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.
- Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
- Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.
- Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup Cortex-M0+ - @{ - */ - -#include "cmsis_version.h" - -/* CMSIS CM0+ definitions */ -#define __CM0PLUS_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ -#define __CM0PLUS_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ -#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16U) | \ - __CM0PLUS_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ - -#define __CORTEX_M (0U) /*!< Cortex-M Core */ - -/** __FPU_USED indicates whether an FPU is used or not. - This core does not support an FPU at all -*/ -#define __FPU_USED 0U - -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TI_ARM__ ) - #if defined __TI_VFP_SUPPORT__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#endif - -#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM0PLUS_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_CM0PLUS_H_DEPENDANT -#define __CORE_CM0PLUS_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __CM0PLUS_REV - #define __CM0PLUS_REV 0x0000U - #warning "__CM0PLUS_REV not defined in device header file; using default!" - #endif - - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0U - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __VTOR_PRESENT - #define __VTOR_PRESENT 0U - #warning "__VTOR_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 2U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - IO Type Qualifiers are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group Cortex-M0+ */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - - Core MPU Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ -#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[31U]; - __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[31U]; - __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[31U]; - __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[31U]; - uint32_t RESERVED4[64U]; - __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ -} NVIC_Type; - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ -#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) - __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ -#else - uint32_t RESERVED0; -#endif - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - uint32_t RESERVED1; - __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) -/* SCB Interrupt Control State Register Definitions */ -#define SCB_VTOR_TBLOFF_Pos 8U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ -#endif - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_MPU Memory Protection Unit (MPU) - \brief Type definitions for the Memory Protection Unit (MPU) - @{ - */ - -/** - \brief Structure type to access the Memory Protection Unit (MPU). - */ -typedef struct -{ - __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ -} MPU_Type; - -#define MPU_TYPE_RALIASES 1U - -/* MPU Type Register Definitions */ -#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ - -#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ - -#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ - -/* MPU Control Register Definitions */ -#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ - -#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ - -#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ - -/* MPU Region Number Register Definitions */ -#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ - -/* MPU Region Base Address Register Definitions */ -#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ -#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ - -#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ -#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ - -#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ -#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ - -/* MPU Region Attribute and Size Register Definitions */ -#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ -#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ - -#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ -#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ - -#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ -#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ - -#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ -#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ - -#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ -#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ - -#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ -#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ - -#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ -#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ - -#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ -#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ - -#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ -#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ - -#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ -#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ - -/*@} end of group CMSIS_MPU */ -#endif - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. - Therefore they are not covered by the Cortex-M0+ header file. - @{ - */ -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. This parameter is interpreted as an uint32_t type. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Core Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ -#endif - -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -#ifdef CMSIS_NVIC_VIRTUAL - #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE - #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" - #endif - #include CMSIS_NVIC_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping - #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping - #define NVIC_EnableIRQ __NVIC_EnableIRQ - #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ - #define NVIC_DisableIRQ __NVIC_DisableIRQ - #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ - #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ - #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ -/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0+ */ - #define NVIC_SetPriority __NVIC_SetPriority - #define NVIC_GetPriority __NVIC_GetPriority - #define NVIC_SystemReset __NVIC_SystemReset -#endif /* CMSIS_NVIC_VIRTUAL */ - -#ifdef CMSIS_VECTAB_VIRTUAL - #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE - #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" - #endif - #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetVector __NVIC_SetVector - #define NVIC_GetVector __NVIC_GetVector -#endif /* (CMSIS_VECTAB_VIRTUAL) */ - -#define NVIC_USER_IRQ_OFFSET 16 - - -/* The following EXC_RETURN values are saved the LR on exception entry */ -#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ -#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ -#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ - - -/* Interrupt Priorities are WORD accessible only under Armv6-M */ -/* The following MACROS handle generation of the register offset and byte masks */ -#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) -#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) -#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) - -#define __NVIC_SetPriorityGrouping(X) (void)(X) -#define __NVIC_GetPriorityGrouping() (0U) - -/** - \brief Enable Interrupt - \details Enables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status - \details Returns a device specific interrupt enable status from the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt - \details Disables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - __DSB(); - __ISB(); - } -} - - -/** - \brief Get Pending Interrupt - \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Set Interrupt Priority - \details Sets the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every processor exception. - */ -__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } - else - { - SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Encode Priority - \details Encodes the priority for an interrupt with the given priority group, - preemptive priority value, and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Used priority group. - \param [in] PreemptPriority Preemptive priority value (starting from 0). - \param [in] SubPriority Subpriority value (starting from 0). - \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). - */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - return ( - ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | - ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) - ); -} - - -/** - \brief Decode Priority - \details Decodes an interrupt priority value with a given priority group to - preemptive priority value and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). - \param [in] PriorityGroup Used priority group. - \param [out] pPreemptPriority Preemptive priority value (starting from 0). - \param [out] pSubPriority Subpriority value (starting from 0). - */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); - *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); -} - - -/** - \brief Set Interrupt Vector - \details Sets an interrupt vector in SRAM based interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - VTOR must been relocated to SRAM before. - If VTOR is not present address 0 must be mapped to SRAM. - \param [in] IRQn Interrupt number - \param [in] vector Address of interrupt handler function - */ -__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) -{ -#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) - uint32_t *vectors = (uint32_t *)SCB->VTOR; -#else - uint32_t *vectors = (uint32_t *)0x0U; -#endif - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; -} - - -/** - \brief Get Interrupt Vector - \details Reads an interrupt vector from interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Address of interrupt handler function - */ -__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) -{ -#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) - uint32_t *vectors = (uint32_t *)SCB->VTOR; -#else - uint32_t *vectors = (uint32_t *)0x0U; -#endif - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; - -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - SCB_AIRCR_SYSRESETREQ_Msk); - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -/*@} end of CMSIS_Core_NVICFunctions */ - -/* ########################## MPU functions #################################### */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - -#include "mpu_armv7.h" - -#endif - -/* ########################## FPU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_FpuFunctions FPU Functions - \brief Function that provides FPU type. - @{ - */ - -/** - \brief get FPU type - \details returns the FPU type - \returns - - \b 0: No FPU - - \b 1: Single precision FPU - - \b 2: Double + Single precision FPU - */ -__STATIC_INLINE uint32_t SCB_GetFPUType(void) -{ - return 0U; /* No FPU */ -} - - -/*@} end of CMSIS_Core_FpuFunctions */ - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function SysTick_Config is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM0PLUS_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/core_cm1.h b/Drivers/core_cm1.h deleted file mode 100644 index fd1c407..0000000 --- a/Drivers/core_cm1.h +++ /dev/null @@ -1,976 +0,0 @@ -/**************************************************************************//** - * @file core_cm1.h - * @brief CMSIS Cortex-M1 Core Peripheral Access Layer Header File - * @version V1.0.0 - * @date 23. July 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_CM1_H_GENERIC -#define __CORE_CM1_H_GENERIC - -#include - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.
- Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
- Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.
- Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup Cortex_M1 - @{ - */ - -#include "cmsis_version.h" - -/* CMSIS CM1 definitions */ -#define __CM1_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ -#define __CM1_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ -#define __CM1_CMSIS_VERSION ((__CM1_CMSIS_VERSION_MAIN << 16U) | \ - __CM1_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ - -#define __CORTEX_M (1U) /*!< Cortex-M Core */ - -/** __FPU_USED indicates whether an FPU is used or not. - This core does not support an FPU at all -*/ -#define __FPU_USED 0U - -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TI_ARM__ ) - #if defined __TI_VFP_SUPPORT__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#endif - -#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM1_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_CM1_H_DEPENDANT -#define __CORE_CM1_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __CM1_REV - #define __CM1_REV 0x0100U - #warning "__CM1_REV not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 2U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - IO Type Qualifiers are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group Cortex_M1 */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t _reserved0:1; /*!< bit: 0 Reserved */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[31U]; - __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[31U]; - __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[31U]; - __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[31U]; - uint32_t RESERVED4[64U]; - __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ -} NVIC_Type; - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - uint32_t RESERVED0; - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - uint32_t RESERVED1; - __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) - \brief Type definitions for the System Control and ID Register not in the SCB - @{ - */ - -/** - \brief Structure type to access the System Control and ID Register not in the SCB. - */ -typedef struct -{ - uint32_t RESERVED0[2U]; - __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ -} SCnSCB_Type; - -/* Auxiliary Control Register Definitions */ -#define SCnSCB_ACTLR_ITCMUAEN_Pos 4U /*!< ACTLR: Instruction TCM Upper Alias Enable Position */ -#define SCnSCB_ACTLR_ITCMUAEN_Msk (1UL << SCnSCB_ACTLR_ITCMUAEN_Pos) /*!< ACTLR: Instruction TCM Upper Alias Enable Mask */ - -#define SCnSCB_ACTLR_ITCMLAEN_Pos 3U /*!< ACTLR: Instruction TCM Lower Alias Enable Position */ -#define SCnSCB_ACTLR_ITCMLAEN_Msk (1UL << SCnSCB_ACTLR_ITCMLAEN_Pos) /*!< ACTLR: Instruction TCM Lower Alias Enable Mask */ - -/*@} end of group CMSIS_SCnotSCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Cortex-M1 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. - Therefore they are not covered by the Cortex-M1 header file. - @{ - */ -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. This parameter is interpreted as an uint32_t type. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Core Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - -#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ - - -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -#ifdef CMSIS_NVIC_VIRTUAL - #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE - #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" - #endif - #include CMSIS_NVIC_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping - #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping - #define NVIC_EnableIRQ __NVIC_EnableIRQ - #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ - #define NVIC_DisableIRQ __NVIC_DisableIRQ - #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ - #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ - #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ -/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M1 */ - #define NVIC_SetPriority __NVIC_SetPriority - #define NVIC_GetPriority __NVIC_GetPriority - #define NVIC_SystemReset __NVIC_SystemReset -#endif /* CMSIS_NVIC_VIRTUAL */ - -#ifdef CMSIS_VECTAB_VIRTUAL - #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE - #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" - #endif - #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetVector __NVIC_SetVector - #define NVIC_GetVector __NVIC_GetVector -#endif /* (CMSIS_VECTAB_VIRTUAL) */ - -#define NVIC_USER_IRQ_OFFSET 16 - - -/* The following EXC_RETURN values are saved the LR on exception entry */ -#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ -#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ -#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ - - -/* Interrupt Priorities are WORD accessible only under Armv6-M */ -/* The following MACROS handle generation of the register offset and byte masks */ -#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) -#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) -#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) - -#define __NVIC_SetPriorityGrouping(X) (void)(X) -#define __NVIC_GetPriorityGrouping() (0U) - -/** - \brief Enable Interrupt - \details Enables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status - \details Returns a device specific interrupt enable status from the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt - \details Disables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - __DSB(); - __ISB(); - } -} - - -/** - \brief Get Pending Interrupt - \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Set Interrupt Priority - \details Sets the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every processor exception. - */ -__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } - else - { - SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Encode Priority - \details Encodes the priority for an interrupt with the given priority group, - preemptive priority value, and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Used priority group. - \param [in] PreemptPriority Preemptive priority value (starting from 0). - \param [in] SubPriority Subpriority value (starting from 0). - \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). - */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - return ( - ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | - ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) - ); -} - - -/** - \brief Decode Priority - \details Decodes an interrupt priority value with a given priority group to - preemptive priority value and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). - \param [in] PriorityGroup Used priority group. - \param [out] pPreemptPriority Preemptive priority value (starting from 0). - \param [out] pSubPriority Subpriority value (starting from 0). - */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); - *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); -} - - - -/** - \brief Set Interrupt Vector - \details Sets an interrupt vector in SRAM based interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - Address 0 must be mapped to SRAM. - \param [in] IRQn Interrupt number - \param [in] vector Address of interrupt handler function - */ -__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) -{ - uint32_t *vectors = (uint32_t *)0x0U; - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; -} - - -/** - \brief Get Interrupt Vector - \details Reads an interrupt vector from interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Address of interrupt handler function - */ -__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) -{ - uint32_t *vectors = (uint32_t *)0x0U; - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - SCB_AIRCR_SYSRESETREQ_Msk); - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -/*@} end of CMSIS_Core_NVICFunctions */ - - -/* ########################## FPU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_FpuFunctions FPU Functions - \brief Function that provides FPU type. - @{ - */ - -/** - \brief get FPU type - \details returns the FPU type - \returns - - \b 0: No FPU - - \b 1: Single precision FPU - - \b 2: Double + Single precision FPU - */ -__STATIC_INLINE uint32_t SCB_GetFPUType(void) -{ - return 0U; /* No FPU */ -} - - -/*@} end of CMSIS_Core_FpuFunctions */ - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function SysTick_Config is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM1_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/core_cm23.h b/Drivers/core_cm23.h deleted file mode 100644 index 8202a8d..0000000 --- a/Drivers/core_cm23.h +++ /dev/null @@ -1,1993 +0,0 @@ -/**************************************************************************//** - * @file core_cm23.h - * @brief CMSIS Cortex-M23 Core Peripheral Access Layer Header File - * @version V5.0.7 - * @date 22. June 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_CM23_H_GENERIC -#define __CORE_CM23_H_GENERIC - -#include - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.
- Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
- Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.
- Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup Cortex_M23 - @{ - */ - -#include "cmsis_version.h" - -/* CMSIS definitions */ -#define __CM23_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ -#define __CM23_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ -#define __CM23_CMSIS_VERSION ((__CM23_CMSIS_VERSION_MAIN << 16U) | \ - __CM23_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ - -#define __CORTEX_M (23U) /*!< Cortex-M Core */ - -/** __FPU_USED indicates whether an FPU is used or not. - This core does not support an FPU at all -*/ -#define __FPU_USED 0U - -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TI_ARM__ ) - #if defined __TI_VFP_SUPPORT__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#endif - -#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM23_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_CM23_H_DEPENDANT -#define __CORE_CM23_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __CM23_REV - #define __CM23_REV 0x0000U - #warning "__CM23_REV not defined in device header file; using default!" - #endif - - #ifndef __FPU_PRESENT - #define __FPU_PRESENT 0U - #warning "__FPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0U - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __SAUREGION_PRESENT - #define __SAUREGION_PRESENT 0U - #warning "__SAUREGION_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __VTOR_PRESENT - #define __VTOR_PRESENT 0U - #warning "__VTOR_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 2U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif - - #ifndef __ETM_PRESENT - #define __ETM_PRESENT 0U - #warning "__ETM_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __MTB_PRESENT - #define __MTB_PRESENT 0U - #warning "__MTB_PRESENT not defined in device header file; using default!" - #endif - -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - IO Type Qualifiers are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group Cortex_M23 */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - - Core Debug Register - - Core MPU Register - - Core SAU Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ - uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ - uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ -#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[16U]; - __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[16U]; - __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[16U]; - __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[16U]; - __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ - uint32_t RESERVED4[16U]; - __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ - uint32_t RESERVED5[16U]; - __IOM uint32_t IPR[124U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ -} NVIC_Type; - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ -#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) - __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ -#else - uint32_t RESERVED0; -#endif - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - uint32_t RESERVED1; - __IOM uint32_t SHPR[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ -#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ - -#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ -#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ - -#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ -#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ -#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ -#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) -/* SCB Vector Table Offset Register Definitions */ -#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ -#endif - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ -#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ - -#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ -#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ - -#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ -#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ -#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ -#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ - -#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ -#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ - -#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ -#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ - -#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ -#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ - -#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ -#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ - -#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ -#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ -#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ -#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ - -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ -#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ - -#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ -#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ - -#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ -#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ - -#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ -#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ - -#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ -#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) - \brief Type definitions for the Data Watchpoint and Trace (DWT) - @{ - */ - -/** - \brief Structure type to access the Data Watchpoint and Trace Register (DWT). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ - uint32_t RESERVED0[6U]; - __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ - __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ - uint32_t RESERVED1[1U]; - __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ - uint32_t RESERVED2[1U]; - __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ - uint32_t RESERVED3[1U]; - __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ - uint32_t RESERVED4[1U]; - __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ - uint32_t RESERVED5[1U]; - __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ - uint32_t RESERVED6[1U]; - __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ - uint32_t RESERVED7[1U]; - __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ - uint32_t RESERVED8[1U]; - __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ - uint32_t RESERVED9[1U]; - __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ - uint32_t RESERVED10[1U]; - __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ - uint32_t RESERVED11[1U]; - __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ - uint32_t RESERVED12[1U]; - __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ - uint32_t RESERVED13[1U]; - __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ - uint32_t RESERVED14[1U]; - __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ - uint32_t RESERVED15[1U]; - __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ - uint32_t RESERVED16[1U]; - __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ - uint32_t RESERVED17[1U]; - __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ - uint32_t RESERVED18[1U]; - __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ - uint32_t RESERVED19[1U]; - __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ - uint32_t RESERVED20[1U]; - __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ - uint32_t RESERVED21[1U]; - __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ - uint32_t RESERVED22[1U]; - __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ - uint32_t RESERVED23[1U]; - __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ - uint32_t RESERVED24[1U]; - __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ - uint32_t RESERVED25[1U]; - __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ - uint32_t RESERVED26[1U]; - __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ - uint32_t RESERVED27[1U]; - __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ - uint32_t RESERVED28[1U]; - __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ - uint32_t RESERVED29[1U]; - __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ - uint32_t RESERVED30[1U]; - __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ - uint32_t RESERVED31[1U]; - __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ -} DWT_Type; - -/* DWT Control Register Definitions */ -#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ -#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ - -#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ -#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ - -#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ -#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ - -#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ -#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ - -#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ -#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ - -/* DWT Comparator Function Register Definitions */ -#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ -#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ - -#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ -#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ - -#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ -#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ - -#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ -#define DWT_FUNCTION_ACTION_Msk (0x3UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ - -#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ -#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ - -/*@}*/ /* end of group CMSIS_DWT */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_TPI Trace Port Interface (TPI) - \brief Type definitions for the Trace Port Interface (TPI) - @{ - */ - -/** - \brief Structure type to access the Trace Port Interface Register (TPI). - */ -typedef struct -{ - __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ - __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ - uint32_t RESERVED0[2U]; - __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ - uint32_t RESERVED1[55U]; - __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ - uint32_t RESERVED2[131U]; - __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ - __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ - __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ - uint32_t RESERVED3[759U]; - __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ - __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ - __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ - uint32_t RESERVED4[1U]; - __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ - __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ - __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ - uint32_t RESERVED5[39U]; - __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ - __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ - uint32_t RESERVED7[8U]; - __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ - __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ -} TPI_Type; - -/* TPI Asynchronous Clock Prescaler Register Definitions */ -#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ -#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ - -/* TPI Selected Pin Protocol Register Definitions */ -#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ -#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ - -/* TPI Formatter and Flush Status Register Definitions */ -#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ -#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ - -#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ -#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ - -#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ -#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ - -#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ -#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ - -/* TPI Formatter and Flush Control Register Definitions */ -#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ -#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ - -#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ -#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ - -#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ -#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ - -/* TPI TRIGGER Register Definitions */ -#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ -#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ - -/* TPI Integration Test FIFO Test Data 0 Register Definitions */ -#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ -#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ - -#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ -#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ - -#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ -#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ - -#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ -#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ - -#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ -#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ - -#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ -#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ - -#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ -#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ - -/* TPI Integration Test ATB Control Register 2 Register Definitions */ -#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ -#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ - -#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ -#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ - -#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ -#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ - -#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ -#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ - -/* TPI Integration Test FIFO Test Data 1 Register Definitions */ -#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ -#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ - -#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ -#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ - -#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ -#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ - -#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ -#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ - -#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ -#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ - -#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ -#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ - -#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ -#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ - -/* TPI Integration Test ATB Control Register 0 Definitions */ -#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ -#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ - -#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ -#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ - -#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ -#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ - -#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ -#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ - -/* TPI Integration Mode Control Register Definitions */ -#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ -#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ - -/* TPI DEVID Register Definitions */ -#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ -#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ - -#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ -#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ - -#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ -#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ - -#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ -#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ - -#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ -#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ - -/* TPI DEVTYPE Register Definitions */ -#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ -#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ - -#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ -#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ - -/*@}*/ /* end of group CMSIS_TPI */ - - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_MPU Memory Protection Unit (MPU) - \brief Type definitions for the Memory Protection Unit (MPU) - @{ - */ - -/** - \brief Structure type to access the Memory Protection Unit (MPU). - */ -typedef struct -{ - __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ - uint32_t RESERVED0[7U]; - union { - __IOM uint32_t MAIR[2]; - struct { - __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ - __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ - }; - }; -} MPU_Type; - -#define MPU_TYPE_RALIASES 1U - -/* MPU Type Register Definitions */ -#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ - -#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ - -#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ - -/* MPU Control Register Definitions */ -#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ - -#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ - -#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ - -/* MPU Region Number Register Definitions */ -#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ - -/* MPU Region Base Address Register Definitions */ -#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ -#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ - -#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ -#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ - -#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ -#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ - -#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ -#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ - -/* MPU Region Limit Address Register Definitions */ -#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ -#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ - -#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ -#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ - -#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: EN Position */ -#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: EN Mask */ - -/* MPU Memory Attribute Indirection Register 0 Definitions */ -#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ -#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ - -#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ -#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ - -#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ -#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ - -#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ -#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ - -/* MPU Memory Attribute Indirection Register 1 Definitions */ -#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ -#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ - -#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ -#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ - -#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ -#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ - -#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ -#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ - -/*@} end of group CMSIS_MPU */ -#endif - - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SAU Security Attribution Unit (SAU) - \brief Type definitions for the Security Attribution Unit (SAU) - @{ - */ - -/** - \brief Structure type to access the Security Attribution Unit (SAU). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ - __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ -#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ - __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ -#endif -} SAU_Type; - -/* SAU Control Register Definitions */ -#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ -#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ - -#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ -#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ - -/* SAU Type Register Definitions */ -#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ -#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ - -#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) -/* SAU Region Number Register Definitions */ -#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ -#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ - -/* SAU Region Base Address Register Definitions */ -#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ -#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ - -/* SAU Region Limit Address Register Definitions */ -#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ -#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ - -#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ -#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ - -#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ -#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ - -#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ - -/*@} end of group CMSIS_SAU */ -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Type definitions for the Core Debug Registers - @{ - */ - -/** - \brief Structure type to access the Core Debug Register (CoreDebug). - */ -typedef struct -{ - __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ - __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ - __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ - __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ - uint32_t RESERVED4[1U]; - __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ - __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ -} CoreDebug_Type; - -/* Debug Halting Control and Status Register Definitions */ -#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ -#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ - -#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ -#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ - -#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ -#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ - -#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ - -#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ -#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ - -#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ -#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ - -#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ -#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ - -#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ -#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ - -#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ -#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ - -#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ -#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ - -#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ -#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ - -#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ -#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ - -/* Debug Core Register Selector Register Definitions */ -#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ -#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ - -#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ -#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ - -/* Debug Exception and Monitor Control Register */ -#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< CoreDebug DEMCR: DWTENA Position */ -#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< CoreDebug DEMCR: DWTENA Mask */ - -#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ -#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ - -#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ -#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ - -/* Debug Authentication Control Register Definitions */ -#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ -#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ - -#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ -#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ - -#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ -#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ - -#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ -#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ - -/* Debug Security Control and Status Register Definitions */ -#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ -#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ - -#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ -#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ - -#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ -#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ - -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. This parameter is interpreted as an uint32_t type. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Core Hardware */ - #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ - #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ - #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ - #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ - #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ - #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ - #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - - - #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ - #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ - #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ - #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ - #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ - #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ - - #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ - #endif - - #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) - #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ - #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ - #endif - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) - #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ - #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ - #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ - #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ - #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ - - #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ - #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ - #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ - #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ - - #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ - #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ - #endif - -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -#ifdef CMSIS_NVIC_VIRTUAL - #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE - #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" - #endif - #include CMSIS_NVIC_VIRTUAL_HEADER_FILE -#else -/*#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping not available for Cortex-M23 */ -/*#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping not available for Cortex-M23 */ - #define NVIC_EnableIRQ __NVIC_EnableIRQ - #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ - #define NVIC_DisableIRQ __NVIC_DisableIRQ - #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ - #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ - #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ - #define NVIC_GetActive __NVIC_GetActive - #define NVIC_SetPriority __NVIC_SetPriority - #define NVIC_GetPriority __NVIC_GetPriority - #define NVIC_SystemReset __NVIC_SystemReset -#endif /* CMSIS_NVIC_VIRTUAL */ - -#ifdef CMSIS_VECTAB_VIRTUAL - #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE - #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" - #endif - #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetVector __NVIC_SetVector - #define NVIC_GetVector __NVIC_GetVector -#endif /* (CMSIS_VECTAB_VIRTUAL) */ - -#define NVIC_USER_IRQ_OFFSET 16 - - -/* Special LR values for Secure/Non-Secure call handling and exception handling */ - -/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ -#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ - -/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ -#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ -#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ -#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ -#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ -#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ -#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ -#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ - -/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ -#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ -#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ -#else -#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ -#endif - - -/* Interrupt Priorities are WORD accessible only under Armv6-M */ -/* The following MACROS handle generation of the register offset and byte masks */ -#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) -#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) -#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) - -#define __NVIC_SetPriorityGrouping(X) (void)(X) -#define __NVIC_GetPriorityGrouping() (0U) - -/** - \brief Enable Interrupt - \details Enables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status - \details Returns a device specific interrupt enable status from the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt - \details Disables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - __DSB(); - __ISB(); - } -} - - -/** - \brief Get Pending Interrupt - \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Active Interrupt - \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not active. - \return 1 Interrupt status is active. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \brief Get Interrupt Target State - \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 if interrupt is assigned to Secure - \return 1 if interrupt is assigned to Non Secure - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Interrupt Target State - \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 if interrupt is assigned to Secure - 1 if interrupt is assigned to Non Secure - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); - return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Clear Interrupt Target State - \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 if interrupt is assigned to Secure - 1 if interrupt is assigned to Non Secure - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); - return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - - -/** - \brief Set Interrupt Priority - \details Sets the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every processor exception. - */ -__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } - else - { - SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Encode Priority - \details Encodes the priority for an interrupt with the given priority group, - preemptive priority value, and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Used priority group. - \param [in] PreemptPriority Preemptive priority value (starting from 0). - \param [in] SubPriority Subpriority value (starting from 0). - \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). - */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - return ( - ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | - ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) - ); -} - - -/** - \brief Decode Priority - \details Decodes an interrupt priority value with a given priority group to - preemptive priority value and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). - \param [in] PriorityGroup Used priority group. - \param [out] pPreemptPriority Preemptive priority value (starting from 0). - \param [out] pSubPriority Subpriority value (starting from 0). - */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); - *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); -} - - -/** - \brief Set Interrupt Vector - \details Sets an interrupt vector in SRAM based interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - VTOR must been relocated to SRAM before. - If VTOR is not present address 0 must be mapped to SRAM. - \param [in] IRQn Interrupt number - \param [in] vector Address of interrupt handler function - */ -__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) -{ -#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) - uint32_t *vectors = (uint32_t *)SCB->VTOR; -#else - uint32_t *vectors = (uint32_t *)0x0U; -#endif - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; -} - - -/** - \brief Get Interrupt Vector - \details Reads an interrupt vector from interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Address of interrupt handler function - */ -__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) -{ -#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) - uint32_t *vectors = (uint32_t *)SCB->VTOR; -#else - uint32_t *vectors = (uint32_t *)0x0U; -#endif - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - SCB_AIRCR_SYSRESETREQ_Msk); - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \brief Enable Interrupt (non-secure) - \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status (non-secure) - \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt (non-secure) - \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Pending Interrupt (non-secure) - \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt (non-secure) - \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt (non-secure) - \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Active Interrupt (non-secure) - \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not active. - \return 1 Interrupt status is active. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Interrupt Priority (non-secure) - \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every non-secure processor exception. - */ -__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } - else - { - SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } -} - - -/** - \brief Get Interrupt Priority (non-secure) - \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } -} -#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ - -/*@} end of CMSIS_Core_NVICFunctions */ - -/* ########################## MPU functions #################################### */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - -#include "mpu_armv8.h" - -#endif - -/* ########################## FPU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_FpuFunctions FPU Functions - \brief Function that provides FPU type. - @{ - */ - -/** - \brief get FPU type - \details returns the FPU type - \returns - - \b 0: No FPU - - \b 1: Single precision FPU - - \b 2: Double + Single precision FPU - */ -__STATIC_INLINE uint32_t SCB_GetFPUType(void) -{ - return 0U; /* No FPU */ -} - - -/*@} end of CMSIS_Core_FpuFunctions */ - - - -/* ########################## SAU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SAUFunctions SAU Functions - \brief Functions that configure the SAU. - @{ - */ - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) - -/** - \brief Enable SAU - \details Enables the Security Attribution Unit (SAU). - */ -__STATIC_INLINE void TZ_SAU_Enable(void) -{ - SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); -} - - - -/** - \brief Disable SAU - \details Disables the Security Attribution Unit (SAU). - */ -__STATIC_INLINE void TZ_SAU_Disable(void) -{ - SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); -} - -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - -/*@} end of CMSIS_Core_SAUFunctions */ - - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function SysTick_Config is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \brief System Tick Configuration (non-secure) - \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function TZ_SysTick_Config_NS is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - - */ -__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM23_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/core_cm3.h b/Drivers/core_cm3.h deleted file mode 100644 index b0dfbd3..0000000 --- a/Drivers/core_cm3.h +++ /dev/null @@ -1,1941 +0,0 @@ -/**************************************************************************//** - * @file core_cm3.h - * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File - * @version V5.0.8 - * @date 04. June 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_CM3_H_GENERIC -#define __CORE_CM3_H_GENERIC - -#include - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.
- Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
- Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.
- Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup Cortex_M3 - @{ - */ - -#include "cmsis_version.h" - -/* CMSIS CM3 definitions */ -#define __CM3_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ -#define __CM3_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ -#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16U) | \ - __CM3_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ - -#define __CORTEX_M (3U) /*!< Cortex-M Core */ - -/** __FPU_USED indicates whether an FPU is used or not. - This core does not support an FPU at all -*/ -#define __FPU_USED 0U - -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TI_ARM__ ) - #if defined __TI_VFP_SUPPORT__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#endif - -#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM3_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_CM3_H_DEPENDANT -#define __CORE_CM3_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __CM3_REV - #define __CM3_REV 0x0200U - #warning "__CM3_REV not defined in device header file; using default!" - #endif - - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0U - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 3U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - IO Type Qualifiers are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group Cortex_M3 */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - - Core Debug Register - - Core MPU Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - -#define APSR_Q_Pos 27U /*!< APSR: Q Position */ -#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:1; /*!< bit: 9 Reserved */ - uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ - uint32_t _reserved1:8; /*!< bit: 16..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit */ - uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ -#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ - -#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ -#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ -#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ -#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[24U]; - __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[24U]; - __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[24U]; - __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[24U]; - __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ - uint32_t RESERVED4[56U]; - __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ - uint32_t RESERVED5[644U]; - __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ -} NVIC_Type; - -/* Software Triggered Interrupt Register Definitions */ -#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ -#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ - __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ - __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ - __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ - __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ - __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ - __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ - __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ - __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ - __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ - __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ - __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ - uint32_t RESERVED0[5U]; - __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ -#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -/* SCB Vector Table Offset Register Definitions */ -#if defined (__CM3_REV) && (__CM3_REV < 0x0201U) /* core r2p1 */ -#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ -#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ - -#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ -#else -#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ -#endif - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ -#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ -#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ - -#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ -#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ - -#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ -#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ -#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ - -#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ -#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ -#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ - -#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ -#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ - -#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ -#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ - -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ -#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ - -#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ -#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ - -#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ -#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ - -#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ -#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ - -#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ -#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ - -#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ -#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ - -#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ -#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ - -#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ -#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ - -#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ -#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ - -#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ -#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ - -/* SCB Configurable Fault Status Register Definitions */ -#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ -#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ - -#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ -#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ - -#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ -#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ - -/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ -#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ - -#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ -#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ - -#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ -#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ - -#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ -#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ - -#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ -#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ - -/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ -#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ - -#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ -#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ - -#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ -#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ - -#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ -#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ - -#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ -#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ - -#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ -#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ - -/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ -#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ - -#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ -#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ - -#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ -#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ - -#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ -#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ - -#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ -#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ - -#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ -#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ - -/* SCB Hard Fault Status Register Definitions */ -#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ -#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ - -#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ -#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ - -#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ -#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ - -/* SCB Debug Fault Status Register Definitions */ -#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ -#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ - -#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ -#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ - -#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ -#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ - -#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ -#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ - -#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ -#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) - \brief Type definitions for the System Control and ID Register not in the SCB - @{ - */ - -/** - \brief Structure type to access the System Control and ID Register not in the SCB. - */ -typedef struct -{ - uint32_t RESERVED0[1U]; - __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ -#if defined (__CM3_REV) && (__CM3_REV >= 0x200U) - __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ -#else - uint32_t RESERVED1[1U]; -#endif -} SCnSCB_Type; - -/* Interrupt Controller Type Register Definitions */ -#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ -#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ - -/* Auxiliary Control Register Definitions */ - -#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ -#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ - -#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ -#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ - -#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ -#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ - -/*@} end of group CMSIS_SCnotSCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) - \brief Type definitions for the Instrumentation Trace Macrocell (ITM) - @{ - */ - -/** - \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). - */ -typedef struct -{ - __OM union - { - __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ - __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ - __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ - } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ - uint32_t RESERVED0[864U]; - __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ - uint32_t RESERVED1[15U]; - __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ - uint32_t RESERVED2[15U]; - __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29U]; - __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ - uint32_t RESERVED4[43U]; - __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ - __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ - uint32_t RESERVED5[6U]; - __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ - __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ - __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ - __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ - __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ - __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ - __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ - __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ - __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ - __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ - __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ - __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ -} ITM_Type; - -/* ITM Trace Privilege Register Definitions */ -#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ -#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ - -/* ITM Trace Control Register Definitions */ -#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ -#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ - -#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ -#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ - -#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ -#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ - -#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ -#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ - -#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ -#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ - -#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ -#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ - -#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ -#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ - -#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ -#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ - -#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ -#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ - -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ - -/* ITM Lock Status Register Definitions */ -#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ -#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ - -#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ -#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ - -#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ -#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ - -/*@}*/ /* end of group CMSIS_ITM */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) - \brief Type definitions for the Data Watchpoint and Trace (DWT) - @{ - */ - -/** - \brief Structure type to access the Data Watchpoint and Trace Register (DWT). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ - __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ - __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ - __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ - __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ - __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ - __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ - __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ - __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ - __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ - __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ - uint32_t RESERVED0[1U]; - __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ - __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ - __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ - uint32_t RESERVED1[1U]; - __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ - __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ - __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ - uint32_t RESERVED2[1U]; - __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ - __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ - __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ -} DWT_Type; - -/* DWT Control Register Definitions */ -#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ -#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ - -#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ -#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ - -#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ -#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ - -#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ -#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ - -#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ -#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ - -#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ -#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ - -#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ -#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ - -#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ -#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ - -#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ -#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ - -#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ -#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ - -#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ -#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ - -#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ -#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ - -#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ -#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ - -#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ -#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ - -#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ -#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ - -#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ -#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ - -#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ -#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ - -#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ -#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ - -/* DWT CPI Count Register Definitions */ -#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ -#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ - -/* DWT Exception Overhead Count Register Definitions */ -#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ -#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ - -/* DWT Sleep Count Register Definitions */ -#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ -#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ - -/* DWT LSU Count Register Definitions */ -#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ -#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ - -/* DWT Folded-instruction Count Register Definitions */ -#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ -#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ - -/* DWT Comparator Mask Register Definitions */ -#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ -#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ - -/* DWT Comparator Function Register Definitions */ -#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ -#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ - -#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ -#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ - -#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ -#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ - -#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ -#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ - -#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ -#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ - -#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ -#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ - -#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ -#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ - -#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ -#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ - -#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ -#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ - -/*@}*/ /* end of group CMSIS_DWT */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_TPI Trace Port Interface (TPI) - \brief Type definitions for the Trace Port Interface (TPI) - @{ - */ - -/** - \brief Structure type to access the Trace Port Interface Register (TPI). - */ -typedef struct -{ - __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ - __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ - uint32_t RESERVED0[2U]; - __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ - uint32_t RESERVED1[55U]; - __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ - uint32_t RESERVED2[131U]; - __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ - __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ - __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ - uint32_t RESERVED3[759U]; - __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ - __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ - __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ - uint32_t RESERVED4[1U]; - __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ - __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ - __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ - uint32_t RESERVED5[39U]; - __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ - __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ - uint32_t RESERVED7[8U]; - __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ - __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ -} TPI_Type; - -/* TPI Asynchronous Clock Prescaler Register Definitions */ -#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ -#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ - -/* TPI Selected Pin Protocol Register Definitions */ -#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ -#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ - -/* TPI Formatter and Flush Status Register Definitions */ -#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ -#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ - -#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ -#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ - -#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ -#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ - -#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ -#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ - -/* TPI Formatter and Flush Control Register Definitions */ -#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ -#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ - -#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ -#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ - -/* TPI TRIGGER Register Definitions */ -#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ -#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ - -/* TPI Integration ETM Data Register Definitions (FIFO0) */ -#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ -#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ - -#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ -#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ - -#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ -#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ - -#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ -#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ - -#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ -#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ - -#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ -#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ - -#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ -#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ - -/* TPI ITATBCTR2 Register Definitions */ -#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ -#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ - -#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ -#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ - -/* TPI Integration ITM Data Register Definitions (FIFO1) */ -#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ -#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ - -#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ -#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ - -#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ -#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ - -#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ -#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ - -#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ -#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ - -#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ -#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ - -#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ -#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ - -/* TPI ITATBCTR0 Register Definitions */ -#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ -#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ - -#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ -#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ - -/* TPI Integration Mode Control Register Definitions */ -#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ -#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ - -/* TPI DEVID Register Definitions */ -#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ -#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ - -#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ -#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ - -#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ -#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ - -#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ -#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ - -#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ -#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ - -#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ -#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ - -/* TPI DEVTYPE Register Definitions */ -#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ -#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ - -#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ -#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ - -/*@}*/ /* end of group CMSIS_TPI */ - - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_MPU Memory Protection Unit (MPU) - \brief Type definitions for the Memory Protection Unit (MPU) - @{ - */ - -/** - \brief Structure type to access the Memory Protection Unit (MPU). - */ -typedef struct -{ - __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ - __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ - __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ - __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ - __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ - __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ - __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ -} MPU_Type; - -#define MPU_TYPE_RALIASES 4U - -/* MPU Type Register Definitions */ -#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ - -#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ - -#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ - -/* MPU Control Register Definitions */ -#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ - -#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ - -#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ - -/* MPU Region Number Register Definitions */ -#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ - -/* MPU Region Base Address Register Definitions */ -#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ -#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ - -#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ -#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ - -#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ -#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ - -/* MPU Region Attribute and Size Register Definitions */ -#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ -#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ - -#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ -#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ - -#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ -#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ - -#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ -#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ - -#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ -#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ - -#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ -#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ - -#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ -#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ - -#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ -#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ - -#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ -#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ - -#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ -#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ - -/*@} end of group CMSIS_MPU */ -#endif - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Type definitions for the Core Debug Registers - @{ - */ - -/** - \brief Structure type to access the Core Debug Register (CoreDebug). - */ -typedef struct -{ - __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ - __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ - __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ - __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ -} CoreDebug_Type; - -/* Debug Halting Control and Status Register Definitions */ -#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ -#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ - -#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ -#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ - -#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ - -#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ -#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ - -#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ -#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ - -#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ -#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ - -#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ -#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ - -#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ -#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ - -#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ -#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ - -#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ -#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ - -#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ -#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ - -#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ -#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ - -/* Debug Core Register Selector Register Definitions */ -#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ -#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ - -#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ -#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ - -/* Debug Exception and Monitor Control Register Definitions */ -#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ -#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ - -#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ -#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ - -#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ -#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ - -#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ -#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ - -#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ -#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ - -#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ -#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ - -#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ -#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ - -#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ -#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ - -#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ -#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ - -#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ -#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ - -#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ -#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ - -#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ -#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ - -#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ -#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ - -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. This parameter is interpreted as an uint32_t type. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Core Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ -#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ -#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ -#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - -#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ -#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ -#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ -#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ -#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ -#endif - -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Debug Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -#ifdef CMSIS_NVIC_VIRTUAL - #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE - #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" - #endif - #include CMSIS_NVIC_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping - #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping - #define NVIC_EnableIRQ __NVIC_EnableIRQ - #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ - #define NVIC_DisableIRQ __NVIC_DisableIRQ - #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ - #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ - #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ - #define NVIC_GetActive __NVIC_GetActive - #define NVIC_SetPriority __NVIC_SetPriority - #define NVIC_GetPriority __NVIC_GetPriority - #define NVIC_SystemReset __NVIC_SystemReset -#endif /* CMSIS_NVIC_VIRTUAL */ - -#ifdef CMSIS_VECTAB_VIRTUAL - #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE - #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" - #endif - #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetVector __NVIC_SetVector - #define NVIC_GetVector __NVIC_GetVector -#endif /* (CMSIS_VECTAB_VIRTUAL) */ - -#define NVIC_USER_IRQ_OFFSET 16 - - -/* The following EXC_RETURN values are saved the LR on exception entry */ -#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ -#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ -#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ - - -/** - \brief Set Priority Grouping - \details Sets the priority grouping field using the required unlock sequence. - The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. - Only values from 0..7 are used. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Priority grouping field. - */ -__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) -{ - uint32_t reg_value; - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - - reg_value = SCB->AIRCR; /* read old register configuration */ - reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ - reg_value = (reg_value | - ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ - SCB->AIRCR = reg_value; -} - - -/** - \brief Get Priority Grouping - \details Reads the priority grouping field from the NVIC Interrupt Controller. - \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). - */ -__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) -{ - return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); -} - - -/** - \brief Enable Interrupt - \details Enables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status - \details Returns a device specific interrupt enable status from the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt - \details Disables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - __DSB(); - __ISB(); - } -} - - -/** - \brief Get Pending Interrupt - \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Active Interrupt - \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not active. - \return 1 Interrupt status is active. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Interrupt Priority - \details Sets the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every processor exception. - */ -__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } - else - { - SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Encode Priority - \details Encodes the priority for an interrupt with the given priority group, - preemptive priority value, and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Used priority group. - \param [in] PreemptPriority Preemptive priority value (starting from 0). - \param [in] SubPriority Subpriority value (starting from 0). - \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). - */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - return ( - ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | - ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) - ); -} - - -/** - \brief Decode Priority - \details Decodes an interrupt priority value with a given priority group to - preemptive priority value and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). - \param [in] PriorityGroup Used priority group. - \param [out] pPreemptPriority Preemptive priority value (starting from 0). - \param [out] pSubPriority Subpriority value (starting from 0). - */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); - *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); -} - - -/** - \brief Set Interrupt Vector - \details Sets an interrupt vector in SRAM based interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - VTOR must been relocated to SRAM before. - \param [in] IRQn Interrupt number - \param [in] vector Address of interrupt handler function - */ -__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) -{ - uint32_t *vectors = (uint32_t *)SCB->VTOR; - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; -} - - -/** - \brief Get Interrupt Vector - \details Reads an interrupt vector from interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Address of interrupt handler function - */ -__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) -{ - uint32_t *vectors = (uint32_t *)SCB->VTOR; - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | - SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -/*@} end of CMSIS_Core_NVICFunctions */ - -/* ########################## MPU functions #################################### */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - -#include "mpu_armv7.h" - -#endif - -/* ########################## FPU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_FpuFunctions FPU Functions - \brief Function that provides FPU type. - @{ - */ - -/** - \brief get FPU type - \details returns the FPU type - \returns - - \b 0: No FPU - - \b 1: Single precision FPU - - \b 2: Double + Single precision FPU - */ -__STATIC_INLINE uint32_t SCB_GetFPUType(void) -{ - return 0U; /* No FPU */ -} - - -/*@} end of CMSIS_Core_FpuFunctions */ - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function SysTick_Config is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - -/* ##################################### Debug In/Output function ########################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_core_DebugFunctions ITM Functions - \brief Functions that access the ITM debug interface. - @{ - */ - -extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ -#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ - - -/** - \brief ITM Send Character - \details Transmits a character via the ITM channel 0, and - \li Just returns when no debugger is connected that has booked the output. - \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. - \param [in] ch Character to transmit. - \returns Character to transmit. - */ -__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) -{ - if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ - ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ - { - while (ITM->PORT[0U].u32 == 0UL) - { - __NOP(); - } - ITM->PORT[0U].u8 = (uint8_t)ch; - } - return (ch); -} - - -/** - \brief ITM Receive Character - \details Inputs a character via the external variable \ref ITM_RxBuffer. - \return Received character. - \return -1 No character pending. - */ -__STATIC_INLINE int32_t ITM_ReceiveChar (void) -{ - int32_t ch = -1; /* no character available */ - - if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) - { - ch = ITM_RxBuffer; - ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ - } - - return (ch); -} - - -/** - \brief ITM Check Character - \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. - \return 0 No character available. - \return 1 Character available. - */ -__STATIC_INLINE int32_t ITM_CheckChar (void) -{ - - if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) - { - return (0); /* no character available */ - } - else - { - return (1); /* character available */ - } -} - -/*@} end of CMSIS_core_DebugFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM3_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/core_cm33.h b/Drivers/core_cm33.h deleted file mode 100644 index 02f82e2..0000000 --- a/Drivers/core_cm33.h +++ /dev/null @@ -1,3002 +0,0 @@ -/**************************************************************************//** - * @file core_cm33.h - * @brief CMSIS Cortex-M33 Core Peripheral Access Layer Header File - * @version V5.0.9 - * @date 06. July 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_CM33_H_GENERIC -#define __CORE_CM33_H_GENERIC - -#include - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.
- Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
- Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.
- Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup Cortex_M33 - @{ - */ - -#include "cmsis_version.h" - -/* CMSIS CM33 definitions */ -#define __CM33_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ -#define __CM33_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ -#define __CM33_CMSIS_VERSION ((__CM33_CMSIS_VERSION_MAIN << 16U) | \ - __CM33_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ - -#define __CORTEX_M (33U) /*!< Cortex-M Core */ - -/** __FPU_USED indicates whether an FPU is used or not. - For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. -*/ -#if defined ( __CC_ARM ) - #if defined (__TARGET_FPU_VFP) - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - - #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) - #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) - #define __DSP_USED 1U - #else - #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" - #define __DSP_USED 0U - #endif - #else - #define __DSP_USED 0U - #endif - -#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined (__ARM_PCS_VFP) - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - - #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) - #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) - #define __DSP_USED 1U - #else - #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" - #define __DSP_USED 0U - #endif - #else - #define __DSP_USED 0U - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - - #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) - #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) - #define __DSP_USED 1U - #else - #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" - #define __DSP_USED 0U - #endif - #else - #define __DSP_USED 0U - #endif - -#elif defined ( __ICCARM__ ) - #if defined (__ARMVFP__) - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - - #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) - #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) - #define __DSP_USED 1U - #else - #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" - #define __DSP_USED 0U - #endif - #else - #define __DSP_USED 0U - #endif - -#elif defined ( __TI_ARM__ ) - #if defined (__TI_VFP_SUPPORT__) - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __TASKING__ ) - #if defined (__FPU_VFP__) - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#endif - -#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM33_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_CM33_H_DEPENDANT -#define __CORE_CM33_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __CM33_REV - #define __CM33_REV 0x0000U - #warning "__CM33_REV not defined in device header file; using default!" - #endif - - #ifndef __FPU_PRESENT - #define __FPU_PRESENT 0U - #warning "__FPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0U - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __SAUREGION_PRESENT - #define __SAUREGION_PRESENT 0U - #warning "__SAUREGION_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __DSP_PRESENT - #define __DSP_PRESENT 0U - #warning "__DSP_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 3U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - IO Type Qualifiers are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group Cortex_M33 */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - - Core Debug Register - - Core MPU Register - - Core SAU Register - - Core FPU Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - -#define APSR_Q_Pos 27U /*!< APSR: Q Position */ -#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ - -#define APSR_GE_Pos 16U /*!< APSR: GE Position */ -#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ -#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ - -#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ -#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ -#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ - uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ - uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ - uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ - uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ -#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ - -#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ -#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ - -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ -#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[16U]; - __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[16U]; - __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[16U]; - __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[16U]; - __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ - uint32_t RESERVED4[16U]; - __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ - uint32_t RESERVED5[16U]; - __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ - uint32_t RESERVED6[580U]; - __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ -} NVIC_Type; - -/* Software Triggered Interrupt Register Definitions */ -#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ -#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ - __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ - __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ - __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ - __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ - __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ - __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ - __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ - __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ - __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ - __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ - __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ - __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ - __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ - __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ - __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ - __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ - __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ - uint32_t RESERVED3[92U]; - __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ - uint32_t RESERVED4[15U]; - __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ - __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ - __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ - uint32_t RESERVED5[1U]; - __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ - uint32_t RESERVED6[1U]; - __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ - __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ - __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ - __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ - __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ - __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ - __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ - __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ - uint32_t RESERVED7[6U]; - __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ - __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ - __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ - __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ - __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ - uint32_t RESERVED8[1U]; - __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ -#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ - -#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ -#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ - -#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ -#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ -#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ -#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -/* SCB Vector Table Offset Register Definitions */ -#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ -#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ - -#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ -#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ - -#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ -#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ - -#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ -#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ -#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ -#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ - -#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ -#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ - -#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ -#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ - -#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ -#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ - -#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ -#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ - -#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ -#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ -#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ -#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ - -#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ -#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ - -#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ -#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ - -#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ -#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ - -#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ -#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ - -#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ -#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ - -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ -#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ - -#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ -#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ - -#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ -#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ - -#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ -#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ - -#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ -#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ - -#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ -#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ - -#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ -#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ - -#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ -#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ - -#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ -#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ - -#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ -#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ - -#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ -#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ - -#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ -#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ - -#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ -#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ - -/* SCB Configurable Fault Status Register Definitions */ -#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ -#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ - -#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ -#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ - -#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ -#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ - -/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ -#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ - -#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ -#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ - -#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ -#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ - -#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ -#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ - -#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ -#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ - -#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ -#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ - -/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ -#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ - -#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ -#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ - -#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ -#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ - -#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ -#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ - -#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ -#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ - -#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ -#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ - -#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ -#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ - -/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ -#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ - -#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ -#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ - -#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ -#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ - -#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ -#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ - -#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ -#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ - -#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ -#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ - -#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ -#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ - -/* SCB Hard Fault Status Register Definitions */ -#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ -#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ - -#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ -#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ - -#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ -#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ - -/* SCB Debug Fault Status Register Definitions */ -#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ -#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ - -#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ -#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ - -#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ -#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ - -#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ -#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ - -#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ -#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ - -/* SCB Non-Secure Access Control Register Definitions */ -#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ -#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ - -#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ -#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ - -#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ -#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ - -/* SCB Cache Level ID Register Definitions */ -#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ -#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ - -#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ -#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ - -/* SCB Cache Type Register Definitions */ -#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ -#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ - -#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ -#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ - -#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ -#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ - -#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ -#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ - -#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ -#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ - -/* SCB Cache Size ID Register Definitions */ -#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ -#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ - -#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ -#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ - -#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ -#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ - -#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ -#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ - -#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ -#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ - -#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ -#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ - -#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ -#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ - -/* SCB Cache Size Selection Register Definitions */ -#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ -#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ - -#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ -#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ - -/* SCB Software Triggered Interrupt Register Definitions */ -#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ -#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ - -/* SCB D-Cache Invalidate by Set-way Register Definitions */ -#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ -#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ - -#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ -#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ - -/* SCB D-Cache Clean by Set-way Register Definitions */ -#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ -#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ - -#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ -#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ - -/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ -#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ -#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ - -#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ -#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ - -/* Instruction Tightly-Coupled Memory Control Register Definitions */ -#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ -#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ - -#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ -#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ - -#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ -#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ - -#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ -#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ - -/* Data Tightly-Coupled Memory Control Register Definitions */ -#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ -#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ - -#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ -#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ - -#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ -#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ - -#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ -#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ - -/* AHBP Control Register Definitions */ -#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ -#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ - -#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ -#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ - -/* L1 Cache Control Register Definitions */ -#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ -#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ - -#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ -#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ - -#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ -#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ - -/* AHBS Control Register Definitions */ -#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ -#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ - -#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ -#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ - -#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ -#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ - -/* Auxiliary Bus Fault Status Register Definitions */ -#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ -#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ - -#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ -#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ - -#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ -#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ - -#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ -#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ - -#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ -#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ - -#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ -#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) - \brief Type definitions for the System Control and ID Register not in the SCB - @{ - */ - -/** - \brief Structure type to access the System Control and ID Register not in the SCB. - */ -typedef struct -{ - uint32_t RESERVED0[1U]; - __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ - __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ - __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ -} SCnSCB_Type; - -/* Interrupt Controller Type Register Definitions */ -#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ -#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ - -/*@} end of group CMSIS_SCnotSCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) - \brief Type definitions for the Instrumentation Trace Macrocell (ITM) - @{ - */ - -/** - \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). - */ -typedef struct -{ - __OM union - { - __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ - __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ - __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ - } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ - uint32_t RESERVED0[864U]; - __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ - uint32_t RESERVED1[15U]; - __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ - uint32_t RESERVED2[15U]; - __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29U]; - __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ - uint32_t RESERVED4[43U]; - __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ - __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ - uint32_t RESERVED5[1U]; - __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ - uint32_t RESERVED6[4U]; - __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ - __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ - __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ - __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ - __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ - __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ - __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ - __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ - __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ - __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ - __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ - __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ -} ITM_Type; - -/* ITM Stimulus Port Register Definitions */ -#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ -#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ - -#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ -#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ - -/* ITM Trace Privilege Register Definitions */ -#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ -#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ - -/* ITM Trace Control Register Definitions */ -#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ -#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ - -#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ -#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ - -#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ -#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ - -#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ -#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ - -#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ -#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ - -#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ -#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ - -#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ -#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ - -#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ -#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ - -#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ -#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ - -#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ -#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ - -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ - -/* ITM Lock Status Register Definitions */ -#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ -#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ - -#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ -#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ - -#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ -#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ - -/*@}*/ /* end of group CMSIS_ITM */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) - \brief Type definitions for the Data Watchpoint and Trace (DWT) - @{ - */ - -/** - \brief Structure type to access the Data Watchpoint and Trace Register (DWT). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ - __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ - __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ - __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ - __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ - __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ - __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ - __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ - __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ - uint32_t RESERVED1[1U]; - __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ - uint32_t RESERVED2[1U]; - __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ - uint32_t RESERVED3[1U]; - __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ - uint32_t RESERVED4[1U]; - __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ - uint32_t RESERVED5[1U]; - __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ - uint32_t RESERVED6[1U]; - __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ - uint32_t RESERVED7[1U]; - __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ - uint32_t RESERVED8[1U]; - __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ - uint32_t RESERVED9[1U]; - __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ - uint32_t RESERVED10[1U]; - __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ - uint32_t RESERVED11[1U]; - __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ - uint32_t RESERVED12[1U]; - __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ - uint32_t RESERVED13[1U]; - __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ - uint32_t RESERVED14[1U]; - __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ - uint32_t RESERVED15[1U]; - __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ - uint32_t RESERVED16[1U]; - __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ - uint32_t RESERVED17[1U]; - __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ - uint32_t RESERVED18[1U]; - __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ - uint32_t RESERVED19[1U]; - __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ - uint32_t RESERVED20[1U]; - __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ - uint32_t RESERVED21[1U]; - __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ - uint32_t RESERVED22[1U]; - __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ - uint32_t RESERVED23[1U]; - __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ - uint32_t RESERVED24[1U]; - __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ - uint32_t RESERVED25[1U]; - __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ - uint32_t RESERVED26[1U]; - __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ - uint32_t RESERVED27[1U]; - __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ - uint32_t RESERVED28[1U]; - __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ - uint32_t RESERVED29[1U]; - __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ - uint32_t RESERVED30[1U]; - __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ - uint32_t RESERVED31[1U]; - __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ - uint32_t RESERVED32[934U]; - __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ - uint32_t RESERVED33[1U]; - __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ -} DWT_Type; - -/* DWT Control Register Definitions */ -#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ -#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ - -#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ -#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ - -#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ -#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ - -#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ -#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ - -#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ -#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ - -#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ -#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ - -#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ -#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ - -#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ -#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ - -#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ -#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ - -#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ -#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ - -#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ -#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ - -#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ -#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ - -#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ -#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ - -#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ -#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ - -#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ -#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ - -#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ -#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ - -#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ -#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ - -#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ -#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ - -#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ -#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ - -/* DWT CPI Count Register Definitions */ -#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ -#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ - -/* DWT Exception Overhead Count Register Definitions */ -#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ -#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ - -/* DWT Sleep Count Register Definitions */ -#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ -#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ - -/* DWT LSU Count Register Definitions */ -#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ -#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ - -/* DWT Folded-instruction Count Register Definitions */ -#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ -#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ - -/* DWT Comparator Function Register Definitions */ -#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ -#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ - -#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ -#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ - -#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ -#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ - -#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ -#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ - -#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ -#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ - -/*@}*/ /* end of group CMSIS_DWT */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_TPI Trace Port Interface (TPI) - \brief Type definitions for the Trace Port Interface (TPI) - @{ - */ - -/** - \brief Structure type to access the Trace Port Interface Register (TPI). - */ -typedef struct -{ - __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ - __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ - uint32_t RESERVED0[2U]; - __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ - uint32_t RESERVED1[55U]; - __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ - uint32_t RESERVED2[131U]; - __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ - __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ - __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ - uint32_t RESERVED3[759U]; - __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ - __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ - __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ - uint32_t RESERVED4[1U]; - __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ - __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ - __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ - uint32_t RESERVED5[39U]; - __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ - __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ - uint32_t RESERVED7[8U]; - __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ - __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ -} TPI_Type; - -/* TPI Asynchronous Clock Prescaler Register Definitions */ -#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ -#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ - -/* TPI Selected Pin Protocol Register Definitions */ -#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ -#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ - -/* TPI Formatter and Flush Status Register Definitions */ -#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ -#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ - -#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ -#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ - -#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ -#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ - -#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ -#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ - -/* TPI Formatter and Flush Control Register Definitions */ -#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ -#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ - -#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ -#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ - -#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ -#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ - -/* TPI TRIGGER Register Definitions */ -#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ -#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ - -/* TPI Integration Test FIFO Test Data 0 Register Definitions */ -#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ -#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ - -#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ -#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ - -#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ -#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ - -#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ -#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ - -#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ -#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ - -#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ -#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ - -#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ -#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ - -/* TPI Integration Test ATB Control Register 2 Register Definitions */ -#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ -#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ - -#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ -#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ - -#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ -#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ - -#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ -#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ - -/* TPI Integration Test FIFO Test Data 1 Register Definitions */ -#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ -#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ - -#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ -#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ - -#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ -#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ - -#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ -#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ - -#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ -#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ - -#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ -#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ - -#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ -#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ - -/* TPI Integration Test ATB Control Register 0 Definitions */ -#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ -#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ - -#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ -#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ - -#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ -#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ - -#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ -#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ - -/* TPI Integration Mode Control Register Definitions */ -#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ -#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ - -/* TPI DEVID Register Definitions */ -#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ -#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ - -#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ -#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ - -#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ -#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ - -#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ -#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ - -#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ -#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ - -/* TPI DEVTYPE Register Definitions */ -#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ -#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ - -#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ -#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ - -/*@}*/ /* end of group CMSIS_TPI */ - - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_MPU Memory Protection Unit (MPU) - \brief Type definitions for the Memory Protection Unit (MPU) - @{ - */ - -/** - \brief Structure type to access the Memory Protection Unit (MPU). - */ -typedef struct -{ - __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ - __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ - __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ - __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ - __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ - __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ - __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ - uint32_t RESERVED0[1]; - union { - __IOM uint32_t MAIR[2]; - struct { - __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ - __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ - }; - }; -} MPU_Type; - -#define MPU_TYPE_RALIASES 4U - -/* MPU Type Register Definitions */ -#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ - -#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ - -#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ - -/* MPU Control Register Definitions */ -#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ - -#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ - -#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ - -/* MPU Region Number Register Definitions */ -#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ - -/* MPU Region Base Address Register Definitions */ -#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ -#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ - -#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ -#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ - -#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ -#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ - -#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ -#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ - -/* MPU Region Limit Address Register Definitions */ -#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ -#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ - -#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ -#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ - -#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ -#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ - -/* MPU Memory Attribute Indirection Register 0 Definitions */ -#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ -#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ - -#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ -#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ - -#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ -#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ - -#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ -#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ - -/* MPU Memory Attribute Indirection Register 1 Definitions */ -#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ -#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ - -#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ -#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ - -#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ -#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ - -#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ -#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ - -/*@} end of group CMSIS_MPU */ -#endif - - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SAU Security Attribution Unit (SAU) - \brief Type definitions for the Security Attribution Unit (SAU) - @{ - */ - -/** - \brief Structure type to access the Security Attribution Unit (SAU). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ - __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ -#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ - __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ -#else - uint32_t RESERVED0[3]; -#endif - __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ - __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ -} SAU_Type; - -/* SAU Control Register Definitions */ -#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ -#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ - -#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ -#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ - -/* SAU Type Register Definitions */ -#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ -#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ - -#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) -/* SAU Region Number Register Definitions */ -#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ -#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ - -/* SAU Region Base Address Register Definitions */ -#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ -#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ - -/* SAU Region Limit Address Register Definitions */ -#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ -#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ - -#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ -#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ - -#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ -#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ - -#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ - -/* Secure Fault Status Register Definitions */ -#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ -#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ - -#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ -#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ - -#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ -#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ - -#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ -#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ - -#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ -#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ - -#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ -#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ - -#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ -#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ - -#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ -#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ - -/*@} end of group CMSIS_SAU */ -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_FPU Floating Point Unit (FPU) - \brief Type definitions for the Floating Point Unit (FPU) - @{ - */ - -/** - \brief Structure type to access the Floating Point Unit (FPU). - */ -typedef struct -{ - uint32_t RESERVED0[1U]; - __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ - __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ - __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ - __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ - __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ -} FPU_Type; - -/* Floating-Point Context Control Register Definitions */ -#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ -#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ - -#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ -#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ - -#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ -#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ - -#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ -#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ - -#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ -#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ - -#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ -#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ - -#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ -#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ - -#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ -#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ - -#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ -#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ - -#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ -#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ - -#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ -#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ - -#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ -#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ - -#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ -#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ - -#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ -#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ - -#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ -#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ - -#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ -#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ - -#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ -#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ - -/* Floating-Point Context Address Register Definitions */ -#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ -#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ - -/* Floating-Point Default Status Control Register Definitions */ -#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ -#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ - -#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ -#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ - -#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ -#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ - -#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ -#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ - -/* Media and FP Feature Register 0 Definitions */ -#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ -#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ - -#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ -#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ - -#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ -#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ - -#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ -#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ - -#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ -#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ - -#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ -#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ - -#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ -#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ - -#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ -#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ - -/* Media and FP Feature Register 1 Definitions */ -#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ -#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ - -#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ -#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ - -#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ -#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ - -#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ -#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ - -/*@} end of group CMSIS_FPU */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Type definitions for the Core Debug Registers - @{ - */ - -/** - \brief Structure type to access the Core Debug Register (CoreDebug). - */ -typedef struct -{ - __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ - __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ - __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ - __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ - uint32_t RESERVED4[1U]; - __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ - __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ -} CoreDebug_Type; - -/* Debug Halting Control and Status Register Definitions */ -#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ -#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ - -#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ -#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ - -#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ -#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ - -#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ - -#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ -#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ - -#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ -#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ - -#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ -#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ - -#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ -#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ - -#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ -#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ - -#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ -#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ - -#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ -#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ - -#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ -#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ - -#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ -#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ - -/* Debug Core Register Selector Register Definitions */ -#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ -#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ - -#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ -#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ - -/* Debug Exception and Monitor Control Register Definitions */ -#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ -#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ - -#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ -#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ - -#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ -#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ - -#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ -#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ - -#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ -#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ - -#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ -#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ - -#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ -#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ - -#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ -#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ - -#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ -#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ - -#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ -#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ - -#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ -#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ - -#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ -#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ - -#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ -#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ - -/* Debug Authentication Control Register Definitions */ -#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ -#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ - -#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ -#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ - -#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ -#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ - -#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ -#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ - -/* Debug Security Control and Status Register Definitions */ -#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ -#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ - -#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ -#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ - -#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ -#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ - -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. This parameter is interpreted as an uint32_t type. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Core Hardware */ - #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ - #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ - #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ - #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ - #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ - #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ - #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ - #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - - #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ - #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ - #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ - #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ - #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ - #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ - #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ - #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ - - #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ - #endif - - #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) - #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ - #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ - #endif - - #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ - #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) - #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ - #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ - #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ - #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ - #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ - - #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ - #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ - #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ - #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ - #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ - - #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ - #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ - #endif - - #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ - #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ - -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Debug Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -#ifdef CMSIS_NVIC_VIRTUAL - #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE - #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" - #endif - #include CMSIS_NVIC_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping - #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping - #define NVIC_EnableIRQ __NVIC_EnableIRQ - #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ - #define NVIC_DisableIRQ __NVIC_DisableIRQ - #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ - #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ - #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ - #define NVIC_GetActive __NVIC_GetActive - #define NVIC_SetPriority __NVIC_SetPriority - #define NVIC_GetPriority __NVIC_GetPriority - #define NVIC_SystemReset __NVIC_SystemReset -#endif /* CMSIS_NVIC_VIRTUAL */ - -#ifdef CMSIS_VECTAB_VIRTUAL - #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE - #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" - #endif - #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetVector __NVIC_SetVector - #define NVIC_GetVector __NVIC_GetVector -#endif /* (CMSIS_VECTAB_VIRTUAL) */ - -#define NVIC_USER_IRQ_OFFSET 16 - - -/* Special LR values for Secure/Non-Secure call handling and exception handling */ - -/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ -#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ - -/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ -#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ -#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ -#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ -#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ -#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ -#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ -#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ - -/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ -#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ -#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ -#else -#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ -#endif - - -/** - \brief Set Priority Grouping - \details Sets the priority grouping field using the required unlock sequence. - The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. - Only values from 0..7 are used. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Priority grouping field. - */ -__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) -{ - uint32_t reg_value; - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - - reg_value = SCB->AIRCR; /* read old register configuration */ - reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ - reg_value = (reg_value | - ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << 8U) ); /* Insert write key and priority group */ - SCB->AIRCR = reg_value; -} - - -/** - \brief Get Priority Grouping - \details Reads the priority grouping field from the NVIC Interrupt Controller. - \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). - */ -__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) -{ - return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); -} - - -/** - \brief Enable Interrupt - \details Enables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status - \details Returns a device specific interrupt enable status from the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt - \details Disables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - __DSB(); - __ISB(); - } -} - - -/** - \brief Get Pending Interrupt - \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Active Interrupt - \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not active. - \return 1 Interrupt status is active. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \brief Get Interrupt Target State - \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 if interrupt is assigned to Secure - \return 1 if interrupt is assigned to Non Secure - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Interrupt Target State - \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 if interrupt is assigned to Secure - 1 if interrupt is assigned to Non Secure - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); - return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Clear Interrupt Target State - \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 if interrupt is assigned to Secure - 1 if interrupt is assigned to Non Secure - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); - return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - - -/** - \brief Set Interrupt Priority - \details Sets the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every processor exception. - */ -__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } - else - { - SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Encode Priority - \details Encodes the priority for an interrupt with the given priority group, - preemptive priority value, and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Used priority group. - \param [in] PreemptPriority Preemptive priority value (starting from 0). - \param [in] SubPriority Subpriority value (starting from 0). - \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). - */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - return ( - ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | - ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) - ); -} - - -/** - \brief Decode Priority - \details Decodes an interrupt priority value with a given priority group to - preemptive priority value and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). - \param [in] PriorityGroup Used priority group. - \param [out] pPreemptPriority Preemptive priority value (starting from 0). - \param [out] pSubPriority Subpriority value (starting from 0). - */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); - *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); -} - - -/** - \brief Set Interrupt Vector - \details Sets an interrupt vector in SRAM based interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - VTOR must been relocated to SRAM before. - \param [in] IRQn Interrupt number - \param [in] vector Address of interrupt handler function - */ -__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) -{ - uint32_t *vectors = (uint32_t *)SCB->VTOR; - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; -} - - -/** - \brief Get Interrupt Vector - \details Reads an interrupt vector from interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Address of interrupt handler function - */ -__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) -{ - uint32_t *vectors = (uint32_t *)SCB->VTOR; - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | - SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \brief Set Priority Grouping (non-secure) - \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. - The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. - Only values from 0..7 are used. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Priority grouping field. - */ -__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) -{ - uint32_t reg_value; - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - - reg_value = SCB_NS->AIRCR; /* read old register configuration */ - reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ - reg_value = (reg_value | - ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ - SCB_NS->AIRCR = reg_value; -} - - -/** - \brief Get Priority Grouping (non-secure) - \details Reads the priority grouping field from the non-secure NVIC when in secure state. - \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) -{ - return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); -} - - -/** - \brief Enable Interrupt (non-secure) - \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status (non-secure) - \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt (non-secure) - \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Pending Interrupt (non-secure) - \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt (non-secure) - \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt (non-secure) - \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Active Interrupt (non-secure) - \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not active. - \return 1 Interrupt status is active. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Interrupt Priority (non-secure) - \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every non-secure processor exception. - */ -__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } - else - { - SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } -} - - -/** - \brief Get Interrupt Priority (non-secure) - \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); - } -} -#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ - -/*@} end of CMSIS_Core_NVICFunctions */ - -/* ########################## MPU functions #################################### */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - -#include "mpu_armv8.h" - -#endif - -/* ########################## FPU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_FpuFunctions FPU Functions - \brief Function that provides FPU type. - @{ - */ - -/** - \brief get FPU type - \details returns the FPU type - \returns - - \b 0: No FPU - - \b 1: Single precision FPU - - \b 2: Double + Single precision FPU - */ -__STATIC_INLINE uint32_t SCB_GetFPUType(void) -{ - uint32_t mvfr0; - - mvfr0 = FPU->MVFR0; - if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) - { - return 2U; /* Double + Single precision FPU */ - } - else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) - { - return 1U; /* Single precision FPU */ - } - else - { - return 0U; /* No FPU */ - } -} - - -/*@} end of CMSIS_Core_FpuFunctions */ - - - -/* ########################## SAU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SAUFunctions SAU Functions - \brief Functions that configure the SAU. - @{ - */ - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) - -/** - \brief Enable SAU - \details Enables the Security Attribution Unit (SAU). - */ -__STATIC_INLINE void TZ_SAU_Enable(void) -{ - SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); -} - - - -/** - \brief Disable SAU - \details Disables the Security Attribution Unit (SAU). - */ -__STATIC_INLINE void TZ_SAU_Disable(void) -{ - SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); -} - -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - -/*@} end of CMSIS_Core_SAUFunctions */ - - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function SysTick_Config is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) -/** - \brief System Tick Configuration (non-secure) - \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function TZ_SysTick_Config_NS is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - - */ -__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} -#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - -/* ##################################### Debug In/Output function ########################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_core_DebugFunctions ITM Functions - \brief Functions that access the ITM debug interface. - @{ - */ - -extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ -#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ - - -/** - \brief ITM Send Character - \details Transmits a character via the ITM channel 0, and - \li Just returns when no debugger is connected that has booked the output. - \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. - \param [in] ch Character to transmit. - \returns Character to transmit. - */ -__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) -{ - if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ - ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ - { - while (ITM->PORT[0U].u32 == 0UL) - { - __NOP(); - } - ITM->PORT[0U].u8 = (uint8_t)ch; - } - return (ch); -} - - -/** - \brief ITM Receive Character - \details Inputs a character via the external variable \ref ITM_RxBuffer. - \return Received character. - \return -1 No character pending. - */ -__STATIC_INLINE int32_t ITM_ReceiveChar (void) -{ - int32_t ch = -1; /* no character available */ - - if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) - { - ch = ITM_RxBuffer; - ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ - } - - return (ch); -} - - -/** - \brief ITM Check Character - \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. - \return 0 No character available. - \return 1 Character available. - */ -__STATIC_INLINE int32_t ITM_CheckChar (void) -{ - - if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) - { - return (0); /* no character available */ - } - else - { - return (1); /* character available */ - } -} - -/*@} end of CMSIS_core_DebugFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM33_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/core_cm7.h b/Drivers/core_cm7.h deleted file mode 100644 index ada6c2a..0000000 --- a/Drivers/core_cm7.h +++ /dev/null @@ -1,2671 +0,0 @@ -/**************************************************************************//** - * @file core_cm7.h - * @brief CMSIS Cortex-M7 Core Peripheral Access Layer Header File - * @version V5.0.8 - * @date 04. June 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_CM7_H_GENERIC -#define __CORE_CM7_H_GENERIC - -#include - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.
- Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
- Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.
- Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup Cortex_M7 - @{ - */ - -#include "cmsis_version.h" - -/* CMSIS CM7 definitions */ -#define __CM7_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ -#define __CM7_CMSIS_VERSION_SUB ( __CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ -#define __CM7_CMSIS_VERSION ((__CM7_CMSIS_VERSION_MAIN << 16U) | \ - __CM7_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ - -#define __CORTEX_M (7U) /*!< Cortex-M Core */ - -/** __FPU_USED indicates whether an FPU is used or not. - For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. -*/ -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __TI_ARM__ ) - #if defined __TI_VFP_SUPPORT__ - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#endif - -#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM7_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_CM7_H_DEPENDANT -#define __CORE_CM7_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __CM7_REV - #define __CM7_REV 0x0000U - #warning "__CM7_REV not defined in device header file; using default!" - #endif - - #ifndef __FPU_PRESENT - #define __FPU_PRESENT 0U - #warning "__FPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0U - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __ICACHE_PRESENT - #define __ICACHE_PRESENT 0U - #warning "__ICACHE_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __DCACHE_PRESENT - #define __DCACHE_PRESENT 0U - #warning "__DCACHE_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __DTCM_PRESENT - #define __DTCM_PRESENT 0U - #warning "__DTCM_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 3U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - IO Type Qualifiers are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group Cortex_M7 */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - - Core Debug Register - - Core MPU Register - - Core FPU Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - -#define APSR_Q_Pos 27U /*!< APSR: Q Position */ -#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ - -#define APSR_GE_Pos 16U /*!< APSR: GE Position */ -#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:1; /*!< bit: 9 Reserved */ - uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit */ - uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ -#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ - -#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ -#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ -#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ - -#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ -#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ - uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ -#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ - -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ -#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[24U]; - __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[24U]; - __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[24U]; - __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[24U]; - __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ - uint32_t RESERVED4[56U]; - __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ - uint32_t RESERVED5[644U]; - __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ -} NVIC_Type; - -/* Software Triggered Interrupt Register Definitions */ -#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ -#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ - __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ - __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ - __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ - __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ - __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ - __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ - __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ - __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ - __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ - __IM uint32_t ID_MFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ - __IM uint32_t ID_ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ - uint32_t RESERVED0[1U]; - __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ - __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ - __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ - __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ - __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ - uint32_t RESERVED3[93U]; - __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ - uint32_t RESERVED4[15U]; - __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ - __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ - __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ - uint32_t RESERVED5[1U]; - __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ - uint32_t RESERVED6[1U]; - __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ - __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ - __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ - __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ - __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ - __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ - __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ - __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ - uint32_t RESERVED7[6U]; - __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ - __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ - __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ - __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ - __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ - uint32_t RESERVED8[1U]; - __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ -#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -/* SCB Vector Table Offset Register Definitions */ -#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ -#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ -#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: Branch prediction enable bit Position */ -#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: Branch prediction enable bit Mask */ - -#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: Instruction cache enable bit Position */ -#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: Instruction cache enable bit Mask */ - -#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: Cache enable bit Position */ -#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: Cache enable bit Mask */ - -#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ - -#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ -#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ - -#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ -#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ -#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ - -#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ -#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ -#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ - -#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ -#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ - -#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ -#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ - -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ -#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ - -#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ -#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ - -#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ -#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ - -#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ -#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ - -#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ -#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ - -#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ -#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ - -#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ -#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ - -#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ -#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ - -#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ -#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ - -#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ -#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ - -/* SCB Configurable Fault Status Register Definitions */ -#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ -#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ - -#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ -#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ - -#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ -#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ - -/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ -#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ - -#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ -#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ - -#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ -#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ - -#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ -#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ - -#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ -#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ - -#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ -#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ - -/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ -#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ - -#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ -#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ - -#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ -#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ - -#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ -#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ - -#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ -#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ - -#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ -#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ - -#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ -#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ - -/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ -#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ - -#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ -#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ - -#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ -#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ - -#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ -#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ - -#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ -#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ - -#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ -#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ - -/* SCB Hard Fault Status Register Definitions */ -#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ -#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ - -#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ -#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ - -#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ -#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ - -/* SCB Debug Fault Status Register Definitions */ -#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ -#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ - -#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ -#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ - -#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ -#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ - -#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ -#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ - -#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ -#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ - -/* SCB Cache Level ID Register Definitions */ -#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ -#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ - -#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ -#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ - -/* SCB Cache Type Register Definitions */ -#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ -#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ - -#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ -#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ - -#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ -#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ - -#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ -#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ - -#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ -#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ - -/* SCB Cache Size ID Register Definitions */ -#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ -#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ - -#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ -#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ - -#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ -#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ - -#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ -#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ - -#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ -#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ - -#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ -#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ - -#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ -#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ - -/* SCB Cache Size Selection Register Definitions */ -#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ -#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ - -#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ -#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ - -/* SCB Software Triggered Interrupt Register Definitions */ -#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ -#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ - -/* SCB D-Cache Invalidate by Set-way Register Definitions */ -#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ -#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ - -#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ -#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ - -/* SCB D-Cache Clean by Set-way Register Definitions */ -#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ -#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ - -#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ -#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ - -/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ -#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ -#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ - -#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ -#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ - -/* Instruction Tightly-Coupled Memory Control Register Definitions */ -#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ -#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ - -#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ -#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ - -#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ -#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ - -#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ -#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ - -/* Data Tightly-Coupled Memory Control Register Definitions */ -#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ -#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ - -#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ -#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ - -#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ -#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ - -#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ -#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ - -/* AHBP Control Register Definitions */ -#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ -#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ - -#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ -#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ - -/* L1 Cache Control Register Definitions */ -#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ -#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ - -#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ -#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ - -#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ -#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ - -/* AHBS Control Register Definitions */ -#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ -#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ - -#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ -#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ - -#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ -#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ - -/* Auxiliary Bus Fault Status Register Definitions */ -#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ -#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ - -#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ -#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ - -#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ -#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ - -#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ -#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ - -#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ -#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ - -#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ -#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) - \brief Type definitions for the System Control and ID Register not in the SCB - @{ - */ - -/** - \brief Structure type to access the System Control and ID Register not in the SCB. - */ -typedef struct -{ - uint32_t RESERVED0[1U]; - __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ - __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ -} SCnSCB_Type; - -/* Interrupt Controller Type Register Definitions */ -#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ -#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ - -/* Auxiliary Control Register Definitions */ -#define SCnSCB_ACTLR_DISITMATBFLUSH_Pos 12U /*!< ACTLR: DISITMATBFLUSH Position */ -#define SCnSCB_ACTLR_DISITMATBFLUSH_Msk (1UL << SCnSCB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */ - -#define SCnSCB_ACTLR_DISRAMODE_Pos 11U /*!< ACTLR: DISRAMODE Position */ -#define SCnSCB_ACTLR_DISRAMODE_Msk (1UL << SCnSCB_ACTLR_DISRAMODE_Pos) /*!< ACTLR: DISRAMODE Mask */ - -#define SCnSCB_ACTLR_FPEXCODIS_Pos 10U /*!< ACTLR: FPEXCODIS Position */ -#define SCnSCB_ACTLR_FPEXCODIS_Msk (1UL << SCnSCB_ACTLR_FPEXCODIS_Pos) /*!< ACTLR: FPEXCODIS Mask */ - -#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ -#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ - -#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ -#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ - -/*@} end of group CMSIS_SCnotSCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) - \brief Type definitions for the Instrumentation Trace Macrocell (ITM) - @{ - */ - -/** - \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). - */ -typedef struct -{ - __OM union - { - __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ - __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ - __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ - } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ - uint32_t RESERVED0[864U]; - __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ - uint32_t RESERVED1[15U]; - __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ - uint32_t RESERVED2[15U]; - __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29U]; - __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ - uint32_t RESERVED4[43U]; - __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ - __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ - uint32_t RESERVED5[6U]; - __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ - __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ - __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ - __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ - __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ - __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ - __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ - __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ - __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ - __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ - __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ - __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ -} ITM_Type; - -/* ITM Trace Privilege Register Definitions */ -#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ -#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ - -/* ITM Trace Control Register Definitions */ -#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ -#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ - -#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ -#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ - -#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ -#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ - -#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ -#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ - -#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ -#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ - -#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ -#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ - -#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ -#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ - -#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ -#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ - -#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ -#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ - -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ - -/* ITM Lock Status Register Definitions */ -#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ -#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ - -#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ -#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ - -#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ -#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ - -/*@}*/ /* end of group CMSIS_ITM */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) - \brief Type definitions for the Data Watchpoint and Trace (DWT) - @{ - */ - -/** - \brief Structure type to access the Data Watchpoint and Trace Register (DWT). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ - __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ - __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ - __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ - __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ - __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ - __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ - __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ - __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ - __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ - __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ - uint32_t RESERVED0[1U]; - __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ - __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ - __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ - uint32_t RESERVED1[1U]; - __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ - __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ - __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ - uint32_t RESERVED2[1U]; - __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ - __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ - __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ - uint32_t RESERVED3[981U]; - __OM uint32_t LAR; /*!< Offset: 0xFB0 ( W) Lock Access Register */ - __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ -} DWT_Type; - -/* DWT Control Register Definitions */ -#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ -#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ - -#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ -#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ - -#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ -#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ - -#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ -#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ - -#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ -#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ - -#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ -#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ - -#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ -#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ - -#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ -#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ - -#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ -#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ - -#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ -#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ - -#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ -#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ - -#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ -#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ - -#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ -#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ - -#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ -#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ - -#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ -#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ - -#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ -#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ - -#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ -#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ - -#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ -#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ - -/* DWT CPI Count Register Definitions */ -#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ -#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ - -/* DWT Exception Overhead Count Register Definitions */ -#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ -#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ - -/* DWT Sleep Count Register Definitions */ -#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ -#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ - -/* DWT LSU Count Register Definitions */ -#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ -#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ - -/* DWT Folded-instruction Count Register Definitions */ -#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ -#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ - -/* DWT Comparator Mask Register Definitions */ -#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ -#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ - -/* DWT Comparator Function Register Definitions */ -#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ -#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ - -#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ -#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ - -#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ -#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ - -#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ -#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ - -#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ -#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ - -#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ -#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ - -#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ -#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ - -#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ -#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ - -#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ -#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ - -/*@}*/ /* end of group CMSIS_DWT */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_TPI Trace Port Interface (TPI) - \brief Type definitions for the Trace Port Interface (TPI) - @{ - */ - -/** - \brief Structure type to access the Trace Port Interface Register (TPI). - */ -typedef struct -{ - __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ - __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ - uint32_t RESERVED0[2U]; - __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ - uint32_t RESERVED1[55U]; - __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ - uint32_t RESERVED2[131U]; - __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ - __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ - __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ - uint32_t RESERVED3[759U]; - __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ - __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ - __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ - uint32_t RESERVED4[1U]; - __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ - __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ - __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ - uint32_t RESERVED5[39U]; - __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ - __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ - uint32_t RESERVED7[8U]; - __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ - __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ -} TPI_Type; - -/* TPI Asynchronous Clock Prescaler Register Definitions */ -#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ -#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ - -/* TPI Selected Pin Protocol Register Definitions */ -#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ -#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ - -/* TPI Formatter and Flush Status Register Definitions */ -#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ -#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ - -#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ -#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ - -#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ -#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ - -#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ -#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ - -/* TPI Formatter and Flush Control Register Definitions */ -#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ -#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ - -#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ -#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ - -/* TPI TRIGGER Register Definitions */ -#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ -#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ - -/* TPI Integration ETM Data Register Definitions (FIFO0) */ -#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ -#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ - -#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ -#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ - -#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ -#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ - -#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ -#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ - -#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ -#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ - -#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ -#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ - -#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ -#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ - -/* TPI ITATBCTR2 Register Definitions */ -#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ -#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ - -#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ -#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ - -/* TPI Integration ITM Data Register Definitions (FIFO1) */ -#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ -#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ - -#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ -#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ - -#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ -#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ - -#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ -#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ - -#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ -#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ - -#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ -#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ - -#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ -#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ - -/* TPI ITATBCTR0 Register Definitions */ -#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ -#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ - -#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ -#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ - -/* TPI Integration Mode Control Register Definitions */ -#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ -#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ - -/* TPI DEVID Register Definitions */ -#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ -#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ - -#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ -#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ - -#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ -#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ - -#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ -#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ - -#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ -#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ - -#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ -#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ - -/* TPI DEVTYPE Register Definitions */ -#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ -#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ - -#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ -#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ - -/*@}*/ /* end of group CMSIS_TPI */ - - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_MPU Memory Protection Unit (MPU) - \brief Type definitions for the Memory Protection Unit (MPU) - @{ - */ - -/** - \brief Structure type to access the Memory Protection Unit (MPU). - */ -typedef struct -{ - __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ - __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ - __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ - __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ - __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ - __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ - __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ -} MPU_Type; - -#define MPU_TYPE_RALIASES 4U - -/* MPU Type Register Definitions */ -#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ - -#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ - -#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ - -/* MPU Control Register Definitions */ -#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ - -#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ - -#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ - -/* MPU Region Number Register Definitions */ -#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ - -/* MPU Region Base Address Register Definitions */ -#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ -#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ - -#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ -#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ - -#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ -#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ - -/* MPU Region Attribute and Size Register Definitions */ -#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ -#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ - -#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ -#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ - -#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ -#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ - -#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ -#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ - -#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ -#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ - -#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ -#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ - -#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ -#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ - -#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ -#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ - -#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ -#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ - -#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ -#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ - -/*@} end of group CMSIS_MPU */ -#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_FPU Floating Point Unit (FPU) - \brief Type definitions for the Floating Point Unit (FPU) - @{ - */ - -/** - \brief Structure type to access the Floating Point Unit (FPU). - */ -typedef struct -{ - uint32_t RESERVED0[1U]; - __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ - __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ - __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ - __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ - __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ - __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */ -} FPU_Type; - -/* Floating-Point Context Control Register Definitions */ -#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ -#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ - -#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ -#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ - -#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ -#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ - -#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ -#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ - -#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ -#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ - -#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ -#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ - -#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ -#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ - -#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ -#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ - -#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ -#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ - -/* Floating-Point Context Address Register Definitions */ -#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ -#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ - -/* Floating-Point Default Status Control Register Definitions */ -#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ -#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ - -#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ -#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ - -#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ -#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ - -#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ -#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ - -/* Media and FP Feature Register 0 Definitions */ -#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ -#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ - -#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ -#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ - -#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ -#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ - -#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ -#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ - -#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ -#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ - -#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ -#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ - -#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ -#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ - -#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ -#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ - -/* Media and FP Feature Register 1 Definitions */ -#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ -#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ - -#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ -#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ - -#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ -#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ - -#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ -#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ - -/* Media and FP Feature Register 2 Definitions */ - -/*@} end of group CMSIS_FPU */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Type definitions for the Core Debug Registers - @{ - */ - -/** - \brief Structure type to access the Core Debug Register (CoreDebug). - */ -typedef struct -{ - __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ - __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ - __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ - __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ -} CoreDebug_Type; - -/* Debug Halting Control and Status Register Definitions */ -#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ -#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ - -#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ -#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ - -#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ - -#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ -#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ - -#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ -#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ - -#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ -#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ - -#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ -#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ - -#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ -#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ - -#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ -#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ - -#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ -#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ - -#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ -#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ - -#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ -#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ - -/* Debug Core Register Selector Register Definitions */ -#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ -#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ - -#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ -#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ - -/* Debug Exception and Monitor Control Register Definitions */ -#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ -#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ - -#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ -#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ - -#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ -#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ - -#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ -#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ - -#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ -#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ - -#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ -#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ - -#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ -#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ - -#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ -#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ - -#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ -#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ - -#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ -#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ - -#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ -#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ - -#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ -#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ - -#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ -#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ - -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. This parameter is interpreted as an uint32_t type. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Core Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ -#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ -#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ -#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - -#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ -#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ -#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ -#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ -#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ -#endif - -#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ -#define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ - -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Debug Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -#ifdef CMSIS_NVIC_VIRTUAL - #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE - #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" - #endif - #include CMSIS_NVIC_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping - #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping - #define NVIC_EnableIRQ __NVIC_EnableIRQ - #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ - #define NVIC_DisableIRQ __NVIC_DisableIRQ - #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ - #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ - #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ - #define NVIC_GetActive __NVIC_GetActive - #define NVIC_SetPriority __NVIC_SetPriority - #define NVIC_GetPriority __NVIC_GetPriority - #define NVIC_SystemReset __NVIC_SystemReset -#endif /* CMSIS_NVIC_VIRTUAL */ - -#ifdef CMSIS_VECTAB_VIRTUAL - #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE - #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" - #endif - #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetVector __NVIC_SetVector - #define NVIC_GetVector __NVIC_GetVector -#endif /* (CMSIS_VECTAB_VIRTUAL) */ - -#define NVIC_USER_IRQ_OFFSET 16 - - -/* The following EXC_RETURN values are saved the LR on exception entry */ -#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ -#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ -#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ -#define EXC_RETURN_HANDLER_FPU (0xFFFFFFE1UL) /* return to Handler mode, uses MSP after return, restore floating-point state */ -#define EXC_RETURN_THREAD_MSP_FPU (0xFFFFFFE9UL) /* return to Thread mode, uses MSP after return, restore floating-point state */ -#define EXC_RETURN_THREAD_PSP_FPU (0xFFFFFFEDUL) /* return to Thread mode, uses PSP after return, restore floating-point state */ - - -/** - \brief Set Priority Grouping - \details Sets the priority grouping field using the required unlock sequence. - The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. - Only values from 0..7 are used. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Priority grouping field. - */ -__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) -{ - uint32_t reg_value; - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - - reg_value = SCB->AIRCR; /* read old register configuration */ - reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ - reg_value = (reg_value | - ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ - SCB->AIRCR = reg_value; -} - - -/** - \brief Get Priority Grouping - \details Reads the priority grouping field from the NVIC Interrupt Controller. - \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). - */ -__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) -{ - return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); -} - - -/** - \brief Enable Interrupt - \details Enables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status - \details Returns a device specific interrupt enable status from the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt - \details Disables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - __DSB(); - __ISB(); - } -} - - -/** - \brief Get Pending Interrupt - \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Active Interrupt - \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not active. - \return 1 Interrupt status is active. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Interrupt Priority - \details Sets the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every processor exception. - */ -__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } - else - { - SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Encode Priority - \details Encodes the priority for an interrupt with the given priority group, - preemptive priority value, and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Used priority group. - \param [in] PreemptPriority Preemptive priority value (starting from 0). - \param [in] SubPriority Subpriority value (starting from 0). - \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). - */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - return ( - ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | - ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) - ); -} - - -/** - \brief Decode Priority - \details Decodes an interrupt priority value with a given priority group to - preemptive priority value and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). - \param [in] PriorityGroup Used priority group. - \param [out] pPreemptPriority Preemptive priority value (starting from 0). - \param [out] pSubPriority Subpriority value (starting from 0). - */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); - *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); -} - - -/** - \brief Set Interrupt Vector - \details Sets an interrupt vector in SRAM based interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - VTOR must been relocated to SRAM before. - \param [in] IRQn Interrupt number - \param [in] vector Address of interrupt handler function - */ -__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) -{ - uint32_t *vectors = (uint32_t *)SCB->VTOR; - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; -} - - -/** - \brief Get Interrupt Vector - \details Reads an interrupt vector from interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Address of interrupt handler function - */ -__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) -{ - uint32_t *vectors = (uint32_t *)SCB->VTOR; - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | - SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -/*@} end of CMSIS_Core_NVICFunctions */ - -/* ########################## MPU functions #################################### */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - -#include "mpu_armv7.h" - -#endif - -/* ########################## FPU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_FpuFunctions FPU Functions - \brief Function that provides FPU type. - @{ - */ - -/** - \brief get FPU type - \details returns the FPU type - \returns - - \b 0: No FPU - - \b 1: Single precision FPU - - \b 2: Double + Single precision FPU - */ -__STATIC_INLINE uint32_t SCB_GetFPUType(void) -{ - uint32_t mvfr0; - - mvfr0 = SCB->MVFR0; - if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) - { - return 2U; /* Double + Single precision FPU */ - } - else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) - { - return 1U; /* Single precision FPU */ - } - else - { - return 0U; /* No FPU */ - } -} - - -/*@} end of CMSIS_Core_FpuFunctions */ - - - -/* ########################## Cache functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_CacheFunctions Cache Functions - \brief Functions that configure Instruction and Data cache. - @{ - */ - -/* Cache Size ID Register Macros */ -#define CCSIDR_WAYS(x) (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos) -#define CCSIDR_SETS(x) (((x) & SCB_CCSIDR_NUMSETS_Msk ) >> SCB_CCSIDR_NUMSETS_Pos ) - - -/** - \brief Enable I-Cache - \details Turns on I-Cache - */ -__STATIC_INLINE void SCB_EnableICache (void) -{ - #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) - __DSB(); - __ISB(); - SCB->ICIALLU = 0UL; /* invalidate I-Cache */ - __DSB(); - __ISB(); - SCB->CCR |= (uint32_t)SCB_CCR_IC_Msk; /* enable I-Cache */ - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Disable I-Cache - \details Turns off I-Cache - */ -__STATIC_INLINE void SCB_DisableICache (void) -{ - #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) - __DSB(); - __ISB(); - SCB->CCR &= ~(uint32_t)SCB_CCR_IC_Msk; /* disable I-Cache */ - SCB->ICIALLU = 0UL; /* invalidate I-Cache */ - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Invalidate I-Cache - \details Invalidates I-Cache - */ -__STATIC_INLINE void SCB_InvalidateICache (void) -{ - #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) - __DSB(); - __ISB(); - SCB->ICIALLU = 0UL; - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Enable D-Cache - \details Turns on D-Cache - */ -__STATIC_INLINE void SCB_EnableDCache (void) -{ - #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) - uint32_t ccsidr; - uint32_t sets; - uint32_t ways; - - SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ - __DSB(); - - ccsidr = SCB->CCSIDR; - - /* invalidate D-Cache */ - sets = (uint32_t)(CCSIDR_SETS(ccsidr)); - do { - ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); - do { - SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | - ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); - #if defined ( __CC_ARM ) - __schedule_barrier(); - #endif - } while (ways-- != 0U); - } while(sets-- != 0U); - __DSB(); - - SCB->CCR |= (uint32_t)SCB_CCR_DC_Msk; /* enable D-Cache */ - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Disable D-Cache - \details Turns off D-Cache - */ -__STATIC_INLINE void SCB_DisableDCache (void) -{ - #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) - uint32_t ccsidr; - uint32_t sets; - uint32_t ways; - - SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ - __DSB(); - - SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk; /* disable D-Cache */ - __DSB(); - - ccsidr = SCB->CCSIDR; - - /* clean & invalidate D-Cache */ - sets = (uint32_t)(CCSIDR_SETS(ccsidr)); - do { - ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); - do { - SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | - ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); - #if defined ( __CC_ARM ) - __schedule_barrier(); - #endif - } while (ways-- != 0U); - } while(sets-- != 0U); - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Invalidate D-Cache - \details Invalidates D-Cache - */ -__STATIC_INLINE void SCB_InvalidateDCache (void) -{ - #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) - uint32_t ccsidr; - uint32_t sets; - uint32_t ways; - - SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ - __DSB(); - - ccsidr = SCB->CCSIDR; - - /* invalidate D-Cache */ - sets = (uint32_t)(CCSIDR_SETS(ccsidr)); - do { - ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); - do { - SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | - ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); - #if defined ( __CC_ARM ) - __schedule_barrier(); - #endif - } while (ways-- != 0U); - } while(sets-- != 0U); - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Clean D-Cache - \details Cleans D-Cache - */ -__STATIC_INLINE void SCB_CleanDCache (void) -{ - #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) - uint32_t ccsidr; - uint32_t sets; - uint32_t ways; - - SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ - __DSB(); - - ccsidr = SCB->CCSIDR; - - /* clean D-Cache */ - sets = (uint32_t)(CCSIDR_SETS(ccsidr)); - do { - ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); - do { - SCB->DCCSW = (((sets << SCB_DCCSW_SET_Pos) & SCB_DCCSW_SET_Msk) | - ((ways << SCB_DCCSW_WAY_Pos) & SCB_DCCSW_WAY_Msk) ); - #if defined ( __CC_ARM ) - __schedule_barrier(); - #endif - } while (ways-- != 0U); - } while(sets-- != 0U); - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Clean & Invalidate D-Cache - \details Cleans and Invalidates D-Cache - */ -__STATIC_INLINE void SCB_CleanInvalidateDCache (void) -{ - #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) - uint32_t ccsidr; - uint32_t sets; - uint32_t ways; - - SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ - __DSB(); - - ccsidr = SCB->CCSIDR; - - /* clean & invalidate D-Cache */ - sets = (uint32_t)(CCSIDR_SETS(ccsidr)); - do { - ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); - do { - SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | - ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); - #if defined ( __CC_ARM ) - __schedule_barrier(); - #endif - } while (ways-- != 0U); - } while(sets-- != 0U); - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief D-Cache Invalidate by address - \details Invalidates D-Cache for the given address - \param[in] addr address (aligned to 32-byte boundary) - \param[in] dsize size of memory block (in number of bytes) -*/ -__STATIC_INLINE void SCB_InvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize) -{ - #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) - int32_t op_size = dsize; - uint32_t op_addr = (uint32_t)addr; - int32_t linesize = 32; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */ - - __DSB(); - - while (op_size > 0) { - SCB->DCIMVAC = op_addr; - op_addr += (uint32_t)linesize; - op_size -= linesize; - } - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief D-Cache Clean by address - \details Cleans D-Cache for the given address - \param[in] addr address (aligned to 32-byte boundary) - \param[in] dsize size of memory block (in number of bytes) -*/ -__STATIC_INLINE void SCB_CleanDCache_by_Addr (uint32_t *addr, int32_t dsize) -{ - #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) - int32_t op_size = dsize; - uint32_t op_addr = (uint32_t) addr; - int32_t linesize = 32; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */ - - __DSB(); - - while (op_size > 0) { - SCB->DCCMVAC = op_addr; - op_addr += (uint32_t)linesize; - op_size -= linesize; - } - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief D-Cache Clean and Invalidate by address - \details Cleans and invalidates D_Cache for the given address - \param[in] addr address (aligned to 32-byte boundary) - \param[in] dsize size of memory block (in number of bytes) -*/ -__STATIC_INLINE void SCB_CleanInvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize) -{ - #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) - int32_t op_size = dsize; - uint32_t op_addr = (uint32_t) addr; - int32_t linesize = 32; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */ - - __DSB(); - - while (op_size > 0) { - SCB->DCCIMVAC = op_addr; - op_addr += (uint32_t)linesize; - op_size -= linesize; - } - - __DSB(); - __ISB(); - #endif -} - - -/*@} end of CMSIS_Core_CacheFunctions */ - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function SysTick_Config is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - -/* ##################################### Debug In/Output function ########################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_core_DebugFunctions ITM Functions - \brief Functions that access the ITM debug interface. - @{ - */ - -extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ -#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ - - -/** - \brief ITM Send Character - \details Transmits a character via the ITM channel 0, and - \li Just returns when no debugger is connected that has booked the output. - \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. - \param [in] ch Character to transmit. - \returns Character to transmit. - */ -__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) -{ - if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ - ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ - { - while (ITM->PORT[0U].u32 == 0UL) - { - __NOP(); - } - ITM->PORT[0U].u8 = (uint8_t)ch; - } - return (ch); -} - - -/** - \brief ITM Receive Character - \details Inputs a character via the external variable \ref ITM_RxBuffer. - \return Received character. - \return -1 No character pending. - */ -__STATIC_INLINE int32_t ITM_ReceiveChar (void) -{ - int32_t ch = -1; /* no character available */ - - if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) - { - ch = ITM_RxBuffer; - ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ - } - - return (ch); -} - - -/** - \brief ITM Check Character - \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. - \return 0 No character available. - \return 1 Character available. - */ -__STATIC_INLINE int32_t ITM_CheckChar (void) -{ - - if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) - { - return (0); /* no character available */ - } - else - { - return (1); /* character available */ - } -} - -/*@} end of CMSIS_core_DebugFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM7_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/core_sc000.h b/Drivers/core_sc000.h deleted file mode 100644 index 9086c64..0000000 --- a/Drivers/core_sc000.h +++ /dev/null @@ -1,1022 +0,0 @@ -/**************************************************************************//** - * @file core_sc000.h - * @brief CMSIS SC000 Core Peripheral Access Layer Header File - * @version V5.0.5 - * @date 28. May 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_SC000_H_GENERIC -#define __CORE_SC000_H_GENERIC - -#include - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.
- Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
- Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.
- Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup SC000 - @{ - */ - -#include "cmsis_version.h" - -/* CMSIS SC000 definitions */ -#define __SC000_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ -#define __SC000_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ -#define __SC000_CMSIS_VERSION ((__SC000_CMSIS_VERSION_MAIN << 16U) | \ - __SC000_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ - -#define __CORTEX_SC (000U) /*!< Cortex secure core */ - -/** __FPU_USED indicates whether an FPU is used or not. - This core does not support an FPU at all -*/ -#define __FPU_USED 0U - -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TI_ARM__ ) - #if defined __TI_VFP_SUPPORT__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#endif - -#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_SC000_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_SC000_H_DEPENDANT -#define __CORE_SC000_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __SC000_REV - #define __SC000_REV 0x0000U - #warning "__SC000_REV not defined in device header file; using default!" - #endif - - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0U - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 2U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - IO Type Qualifiers are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group SC000 */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - - Core MPU Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t _reserved0:1; /*!< bit: 0 Reserved */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[31U]; - __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[31U]; - __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[31U]; - __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[31U]; - uint32_t RESERVED4[64U]; - __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ -} NVIC_Type; - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - uint32_t RESERVED0[1U]; - __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ - uint32_t RESERVED1[154U]; - __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) - \brief Type definitions for the System Control and ID Register not in the SCB - @{ - */ - -/** - \brief Structure type to access the System Control and ID Register not in the SCB. - */ -typedef struct -{ - uint32_t RESERVED0[2U]; - __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ -} SCnSCB_Type; - -/* Auxiliary Control Register Definitions */ -#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ -#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ - -/*@} end of group CMSIS_SCnotSCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_MPU Memory Protection Unit (MPU) - \brief Type definitions for the Memory Protection Unit (MPU) - @{ - */ - -/** - \brief Structure type to access the Memory Protection Unit (MPU). - */ -typedef struct -{ - __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ -} MPU_Type; - -/* MPU Type Register Definitions */ -#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ - -#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ - -#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ - -/* MPU Control Register Definitions */ -#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ - -#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ - -#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ - -/* MPU Region Number Register Definitions */ -#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ - -/* MPU Region Base Address Register Definitions */ -#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ -#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ - -#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ -#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ - -#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ -#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ - -/* MPU Region Attribute and Size Register Definitions */ -#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ -#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ - -#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ -#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ - -#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ -#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ - -#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ -#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ - -#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ -#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ - -#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ -#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ - -#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ -#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ - -#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ -#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ - -#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ -#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ - -#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ -#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ - -/*@} end of group CMSIS_MPU */ -#endif - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief SC000 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. - Therefore they are not covered by the SC000 header file. - @{ - */ -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. This parameter is interpreted as an uint32_t type. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Core Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - -#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ -#endif - -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -#ifdef CMSIS_NVIC_VIRTUAL - #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE - #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" - #endif - #include CMSIS_NVIC_VIRTUAL_HEADER_FILE -#else -/*#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping not available for SC000 */ -/*#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping not available for SC000 */ - #define NVIC_EnableIRQ __NVIC_EnableIRQ - #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ - #define NVIC_DisableIRQ __NVIC_DisableIRQ - #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ - #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ - #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ -/*#define NVIC_GetActive __NVIC_GetActive not available for SC000 */ - #define NVIC_SetPriority __NVIC_SetPriority - #define NVIC_GetPriority __NVIC_GetPriority - #define NVIC_SystemReset __NVIC_SystemReset -#endif /* CMSIS_NVIC_VIRTUAL */ - -#ifdef CMSIS_VECTAB_VIRTUAL - #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE - #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" - #endif - #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetVector __NVIC_SetVector - #define NVIC_GetVector __NVIC_GetVector -#endif /* (CMSIS_VECTAB_VIRTUAL) */ - -#define NVIC_USER_IRQ_OFFSET 16 - - -/* The following EXC_RETURN values are saved the LR on exception entry */ -#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ -#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ -#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ - - -/* Interrupt Priorities are WORD accessible only under Armv6-M */ -/* The following MACROS handle generation of the register offset and byte masks */ -#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) -#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) -#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) - - -/** - \brief Enable Interrupt - \details Enables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status - \details Returns a device specific interrupt enable status from the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt - \details Disables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - __DSB(); - __ISB(); - } -} - - -/** - \brief Get Pending Interrupt - \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Set Interrupt Priority - \details Sets the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every processor exception. - */ -__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } - else - { - SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Set Interrupt Vector - \details Sets an interrupt vector in SRAM based interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - VTOR must been relocated to SRAM before. - \param [in] IRQn Interrupt number - \param [in] vector Address of interrupt handler function - */ -__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) -{ - uint32_t *vectors = (uint32_t *)SCB->VTOR; - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; -} - - -/** - \brief Get Interrupt Vector - \details Reads an interrupt vector from interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Address of interrupt handler function - */ -__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) -{ - uint32_t *vectors = (uint32_t *)SCB->VTOR; - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - SCB_AIRCR_SYSRESETREQ_Msk); - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -/*@} end of CMSIS_Core_NVICFunctions */ - - -/* ########################## FPU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_FpuFunctions FPU Functions - \brief Function that provides FPU type. - @{ - */ - -/** - \brief get FPU type - \details returns the FPU type - \returns - - \b 0: No FPU - - \b 1: Single precision FPU - - \b 2: Double + Single precision FPU - */ -__STATIC_INLINE uint32_t SCB_GetFPUType(void) -{ - return 0U; /* No FPU */ -} - - -/*@} end of CMSIS_Core_FpuFunctions */ - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function SysTick_Config is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_SC000_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/core_sc300.h b/Drivers/core_sc300.h deleted file mode 100644 index 665822d..0000000 --- a/Drivers/core_sc300.h +++ /dev/null @@ -1,1915 +0,0 @@ -/**************************************************************************//** - * @file core_sc300.h - * @brief CMSIS SC300 Core Peripheral Access Layer Header File - * @version V5.0.6 - * @date 04. June 2018 - ******************************************************************************/ -/* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_SC300_H_GENERIC -#define __CORE_SC300_H_GENERIC - -#include - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.
- Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
- Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.
- Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup SC3000 - @{ - */ - -#include "cmsis_version.h" - -/* CMSIS SC300 definitions */ -#define __SC300_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ -#define __SC300_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ -#define __SC300_CMSIS_VERSION ((__SC300_CMSIS_VERSION_MAIN << 16U) | \ - __SC300_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ - -#define __CORTEX_SC (300U) /*!< Cortex secure core */ - -/** __FPU_USED indicates whether an FPU is used or not. - This core does not support an FPU at all -*/ -#define __FPU_USED 0U - -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TI_ARM__ ) - #if defined __TI_VFP_SUPPORT__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#endif - -#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_SC300_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_SC300_H_DEPENDANT -#define __CORE_SC300_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __SC300_REV - #define __SC300_REV 0x0000U - #warning "__SC300_REV not defined in device header file; using default!" - #endif - - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0U - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 3U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - IO Type Qualifiers are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group SC300 */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - - Core Debug Register - - Core MPU Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - -#define APSR_Q_Pos 27U /*!< APSR: Q Position */ -#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:1; /*!< bit: 9 Reserved */ - uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ - uint32_t _reserved1:8; /*!< bit: 16..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit */ - uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ -#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ - -#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ -#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ -#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ -#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[24U]; - __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[24U]; - __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[24U]; - __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[24U]; - __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ - uint32_t RESERVED4[56U]; - __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ - uint32_t RESERVED5[644U]; - __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ -} NVIC_Type; - -/* Software Triggered Interrupt Register Definitions */ -#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ -#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ - __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ - __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ - __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ - __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ - __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ - __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ - __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ - __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ - __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ - __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ - __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ - uint32_t RESERVED0[5U]; - __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ - uint32_t RESERVED1[129U]; - __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ -#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -/* SCB Vector Table Offset Register Definitions */ -#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ -#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ - -#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ -#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ -#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ - -#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ -#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ - -#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ -#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ -#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ - -#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ -#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ -#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ - -#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ -#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ - -#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ -#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ - -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ -#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ - -#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ -#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ - -#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ -#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ - -#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ -#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ - -#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ -#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ - -#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ -#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ - -#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ -#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ - -#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ -#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ - -#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ -#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ - -#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ -#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ - -/* SCB Configurable Fault Status Register Definitions */ -#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ -#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ - -#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ -#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ - -#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ -#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ - -/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ -#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ - -#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ -#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ - -#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ -#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ - -#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ -#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ - -#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ -#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ - -/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ -#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ - -#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ -#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ - -#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ -#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ - -#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ -#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ - -#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ -#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ - -#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ -#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ - -/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ -#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ -#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ - -#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ -#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ - -#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ -#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ - -#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ -#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ - -#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ -#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ - -#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ -#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ - -/* SCB Hard Fault Status Register Definitions */ -#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ -#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ - -#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ -#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ - -#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ -#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ - -/* SCB Debug Fault Status Register Definitions */ -#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ -#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ - -#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ -#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ - -#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ -#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ - -#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ -#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ - -#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ -#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) - \brief Type definitions for the System Control and ID Register not in the SCB - @{ - */ - -/** - \brief Structure type to access the System Control and ID Register not in the SCB. - */ -typedef struct -{ - uint32_t RESERVED0[1U]; - __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ - uint32_t RESERVED1[1U]; -} SCnSCB_Type; - -/* Interrupt Controller Type Register Definitions */ -#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ -#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ - -/*@} end of group CMSIS_SCnotSCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) - \brief Type definitions for the Instrumentation Trace Macrocell (ITM) - @{ - */ - -/** - \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). - */ -typedef struct -{ - __OM union - { - __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ - __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ - __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ - } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ - uint32_t RESERVED0[864U]; - __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ - uint32_t RESERVED1[15U]; - __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ - uint32_t RESERVED2[15U]; - __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29U]; - __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ - uint32_t RESERVED4[43U]; - __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ - __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ - uint32_t RESERVED5[6U]; - __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ - __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ - __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ - __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ - __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ - __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ - __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ - __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ - __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ - __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ - __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ - __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ -} ITM_Type; - -/* ITM Trace Privilege Register Definitions */ -#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ -#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ - -/* ITM Trace Control Register Definitions */ -#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ -#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ - -#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ -#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ - -#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ -#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ - -#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ -#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ - -#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ -#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ - -#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ -#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ - -#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ -#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ - -#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ -#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ - -#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ -#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ - -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ - -/* ITM Lock Status Register Definitions */ -#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ -#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ - -#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ -#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ - -#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ -#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ - -/*@}*/ /* end of group CMSIS_ITM */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) - \brief Type definitions for the Data Watchpoint and Trace (DWT) - @{ - */ - -/** - \brief Structure type to access the Data Watchpoint and Trace Register (DWT). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ - __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ - __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ - __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ - __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ - __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ - __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ - __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ - __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ - __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ - __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ - uint32_t RESERVED0[1U]; - __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ - __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ - __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ - uint32_t RESERVED1[1U]; - __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ - __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ - __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ - uint32_t RESERVED2[1U]; - __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ - __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ - __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ -} DWT_Type; - -/* DWT Control Register Definitions */ -#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ -#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ - -#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ -#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ - -#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ -#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ - -#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ -#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ - -#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ -#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ - -#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ -#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ - -#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ -#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ - -#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ -#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ - -#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ -#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ - -#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ -#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ - -#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ -#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ - -#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ -#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ - -#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ -#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ - -#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ -#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ - -#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ -#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ - -#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ -#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ - -#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ -#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ - -#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ -#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ - -/* DWT CPI Count Register Definitions */ -#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ -#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ - -/* DWT Exception Overhead Count Register Definitions */ -#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ -#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ - -/* DWT Sleep Count Register Definitions */ -#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ -#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ - -/* DWT LSU Count Register Definitions */ -#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ -#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ - -/* DWT Folded-instruction Count Register Definitions */ -#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ -#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ - -/* DWT Comparator Mask Register Definitions */ -#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ -#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ - -/* DWT Comparator Function Register Definitions */ -#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ -#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ - -#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ -#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ - -#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ -#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ - -#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ -#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ - -#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ -#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ - -#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ -#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ - -#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ -#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ - -#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ -#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ - -#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ -#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ - -/*@}*/ /* end of group CMSIS_DWT */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_TPI Trace Port Interface (TPI) - \brief Type definitions for the Trace Port Interface (TPI) - @{ - */ - -/** - \brief Structure type to access the Trace Port Interface Register (TPI). - */ -typedef struct -{ - __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ - __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ - uint32_t RESERVED0[2U]; - __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ - uint32_t RESERVED1[55U]; - __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ - uint32_t RESERVED2[131U]; - __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ - __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ - __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ - uint32_t RESERVED3[759U]; - __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ - __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ - __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ - uint32_t RESERVED4[1U]; - __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ - __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ - __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ - uint32_t RESERVED5[39U]; - __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ - __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ - uint32_t RESERVED7[8U]; - __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ - __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ -} TPI_Type; - -/* TPI Asynchronous Clock Prescaler Register Definitions */ -#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ -#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ - -/* TPI Selected Pin Protocol Register Definitions */ -#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ -#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ - -/* TPI Formatter and Flush Status Register Definitions */ -#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ -#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ - -#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ -#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ - -#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ -#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ - -#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ -#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ - -/* TPI Formatter and Flush Control Register Definitions */ -#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ -#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ - -#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ -#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ - -/* TPI TRIGGER Register Definitions */ -#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ -#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ - -/* TPI Integration ETM Data Register Definitions (FIFO0) */ -#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ -#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ - -#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ -#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ - -#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ -#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ - -#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ -#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ - -#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ -#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ - -#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ -#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ - -#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ -#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ - -/* TPI ITATBCTR2 Register Definitions */ -#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ -#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ - -#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ -#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ - -/* TPI Integration ITM Data Register Definitions (FIFO1) */ -#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ -#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ - -#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ -#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ - -#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ -#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ - -#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ -#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ - -#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ -#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ - -#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ -#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ - -#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ -#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ - -/* TPI ITATBCTR0 Register Definitions */ -#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ -#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ - -#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ -#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ - -/* TPI Integration Mode Control Register Definitions */ -#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ -#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ - -/* TPI DEVID Register Definitions */ -#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ -#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ - -#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ -#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ - -#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ -#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ - -#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ -#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ - -#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ -#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ - -#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ -#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ - -/* TPI DEVTYPE Register Definitions */ -#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ -#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ - -#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ -#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ - -/*@}*/ /* end of group CMSIS_TPI */ - - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_MPU Memory Protection Unit (MPU) - \brief Type definitions for the Memory Protection Unit (MPU) - @{ - */ - -/** - \brief Structure type to access the Memory Protection Unit (MPU). - */ -typedef struct -{ - __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ - __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ - __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ - __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ - __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ - __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ - __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ -} MPU_Type; - -/* MPU Type Register Definitions */ -#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ - -#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ - -#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ - -/* MPU Control Register Definitions */ -#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ - -#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ - -#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ - -/* MPU Region Number Register Definitions */ -#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ - -/* MPU Region Base Address Register Definitions */ -#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ -#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ - -#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ -#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ - -#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ -#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ - -/* MPU Region Attribute and Size Register Definitions */ -#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ -#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ - -#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ -#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ - -#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ -#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ - -#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ -#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ - -#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ -#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ - -#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ -#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ - -#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ -#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ - -#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ -#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ - -#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ -#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ - -#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ -#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ - -/*@} end of group CMSIS_MPU */ -#endif - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Type definitions for the Core Debug Registers - @{ - */ - -/** - \brief Structure type to access the Core Debug Register (CoreDebug). - */ -typedef struct -{ - __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ - __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ - __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ - __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ -} CoreDebug_Type; - -/* Debug Halting Control and Status Register Definitions */ -#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ -#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ - -#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ -#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ - -#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ - -#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ -#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ - -#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ -#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ - -#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ -#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ - -#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ -#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ - -#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ -#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ - -#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ -#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ - -#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ -#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ - -#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ -#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ - -#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ -#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ - -/* Debug Core Register Selector Register Definitions */ -#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ -#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ - -#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ -#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ - -/* Debug Exception and Monitor Control Register Definitions */ -#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ -#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ - -#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ -#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ - -#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ -#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ - -#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ -#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ - -#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ -#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ - -#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ -#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ - -#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ -#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ - -#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ -#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ - -#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ -#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ - -#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ -#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ - -#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ -#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ - -#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ -#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ - -#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ -#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ - -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. This parameter is interpreted as an uint32_t type. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Core Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ -#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ -#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ -#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - -#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ -#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ -#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ -#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ -#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ -#endif - -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Debug Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -#ifdef CMSIS_NVIC_VIRTUAL - #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE - #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" - #endif - #include CMSIS_NVIC_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping - #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping - #define NVIC_EnableIRQ __NVIC_EnableIRQ - #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ - #define NVIC_DisableIRQ __NVIC_DisableIRQ - #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ - #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ - #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ - #define NVIC_GetActive __NVIC_GetActive - #define NVIC_SetPriority __NVIC_SetPriority - #define NVIC_GetPriority __NVIC_GetPriority - #define NVIC_SystemReset __NVIC_SystemReset -#endif /* CMSIS_NVIC_VIRTUAL */ - -#ifdef CMSIS_VECTAB_VIRTUAL - #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE - #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" - #endif - #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE -#else - #define NVIC_SetVector __NVIC_SetVector - #define NVIC_GetVector __NVIC_GetVector -#endif /* (CMSIS_VECTAB_VIRTUAL) */ - -#define NVIC_USER_IRQ_OFFSET 16 - - -/* The following EXC_RETURN values are saved the LR on exception entry */ -#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ -#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ -#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ - - - -/** - \brief Set Priority Grouping - \details Sets the priority grouping field using the required unlock sequence. - The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. - Only values from 0..7 are used. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Priority grouping field. - */ -__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) -{ - uint32_t reg_value; - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - - reg_value = SCB->AIRCR; /* read old register configuration */ - reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ - reg_value = (reg_value | - ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ - SCB->AIRCR = reg_value; -} - - -/** - \brief Get Priority Grouping - \details Reads the priority grouping field from the NVIC Interrupt Controller. - \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). - */ -__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) -{ - return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); -} - - -/** - \brief Enable Interrupt - \details Enables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Interrupt Enable status - \details Returns a device specific interrupt enable status from the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt is not enabled. - \return 1 Interrupt is enabled. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Disable Interrupt - \details Disables a device specific interrupt in the NVIC interrupt controller. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - __DSB(); - __ISB(); - } -} - - -/** - \brief Get Pending Interrupt - \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of a device specific interrupt in the NVIC pending register. - \param [in] IRQn Device specific interrupt number. - \note IRQn must not be negative. - */ -__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); - } -} - - -/** - \brief Get Active Interrupt - \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. - \param [in] IRQn Device specific interrupt number. - \return 0 Interrupt status is not active. - \return 1 Interrupt status is active. - \note IRQn must not be negative. - */ -__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} - - -/** - \brief Set Interrupt Priority - \details Sets the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - \note The priority cannot be set for every processor exception. - */ -__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) >= 0) - { - NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } - else - { - SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of a device specific interrupt or a processor exception. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) >= 0) - { - return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Encode Priority - \details Encodes the priority for an interrupt with the given priority group, - preemptive priority value, and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Used priority group. - \param [in] PreemptPriority Preemptive priority value (starting from 0). - \param [in] SubPriority Subpriority value (starting from 0). - \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). - */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - return ( - ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | - ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) - ); -} - - -/** - \brief Decode Priority - \details Decodes an interrupt priority value with a given priority group to - preemptive priority value and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). - \param [in] PriorityGroup Used priority group. - \param [out] pPreemptPriority Preemptive priority value (starting from 0). - \param [out] pSubPriority Subpriority value (starting from 0). - */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); - *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); -} - - -/** - \brief Set Interrupt Vector - \details Sets an interrupt vector in SRAM based interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - VTOR must been relocated to SRAM before. - \param [in] IRQn Interrupt number - \param [in] vector Address of interrupt handler function - */ -__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) -{ - uint32_t *vectors = (uint32_t *)SCB->VTOR; - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; -} - - -/** - \brief Get Interrupt Vector - \details Reads an interrupt vector from interrupt vector table. - The interrupt number can be positive to specify a device specific interrupt, - or negative to specify a processor exception. - \param [in] IRQn Interrupt number. - \return Address of interrupt handler function - */ -__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) -{ - uint32_t *vectors = (uint32_t *)SCB->VTOR; - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | - SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -/*@} end of CMSIS_Core_NVICFunctions */ - - -/* ########################## FPU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_FpuFunctions FPU Functions - \brief Function that provides FPU type. - @{ - */ - -/** - \brief get FPU type - \details returns the FPU type - \returns - - \b 0: No FPU - - \b 1: Single precision FPU - - \b 2: Double + Single precision FPU - */ -__STATIC_INLINE uint32_t SCB_GetFPUType(void) -{ - return 0U; /* No FPU */ -} - - -/*@} end of CMSIS_Core_FpuFunctions */ - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable __Vendor_SysTickConfig is set to 1, then the - function SysTick_Config is not included. In this case, the file device.h - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - -/* ##################################### Debug In/Output function ########################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_core_DebugFunctions ITM Functions - \brief Functions that access the ITM debug interface. - @{ - */ - -extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ -#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ - - -/** - \brief ITM Send Character - \details Transmits a character via the ITM channel 0, and - \li Just returns when no debugger is connected that has booked the output. - \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. - \param [in] ch Character to transmit. - \returns Character to transmit. - */ -__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) -{ - if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ - ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ - { - while (ITM->PORT[0U].u32 == 0UL) - { - __NOP(); - } - ITM->PORT[0U].u8 = (uint8_t)ch; - } - return (ch); -} - - -/** - \brief ITM Receive Character - \details Inputs a character via the external variable \ref ITM_RxBuffer. - \return Received character. - \return -1 No character pending. - */ -__STATIC_INLINE int32_t ITM_ReceiveChar (void) -{ - int32_t ch = -1; /* no character available */ - - if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) - { - ch = ITM_RxBuffer; - ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ - } - - return (ch); -} - - -/** - \brief ITM Check Character - \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. - \return 0 No character available. - \return 1 Character available. - */ -__STATIC_INLINE int32_t ITM_CheckChar (void) -{ - - if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) - { - return (0); /* no character available */ - } - else - { - return (1); /* character available */ - } -} - -/*@} end of CMSIS_core_DebugFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_SC300_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/mpu_armv8.h b/Drivers/mpu_armv8.h deleted file mode 100644 index 99ee9f9..0000000 --- a/Drivers/mpu_armv8.h +++ /dev/null @@ -1,333 +0,0 @@ -/****************************************************************************** - * @file mpu_armv8.h - * @brief CMSIS MPU API for Armv8-M MPU - * @version V5.0.4 - * @date 10. January 2018 - ******************************************************************************/ -/* - * Copyright (c) 2017-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef ARM_MPU_ARMV8_H -#define ARM_MPU_ARMV8_H - -/** \brief Attribute for device memory (outer only) */ -#define ARM_MPU_ATTR_DEVICE ( 0U ) - -/** \brief Attribute for non-cacheable, normal memory */ -#define ARM_MPU_ATTR_NON_CACHEABLE ( 4U ) - -/** \brief Attribute for normal memory (outer and inner) -* \param NT Non-Transient: Set to 1 for non-transient data. -* \param WB Write-Back: Set to 1 to use write-back update policy. -* \param RA Read Allocation: Set to 1 to use cache allocation on read miss. -* \param WA Write Allocation: Set to 1 to use cache allocation on write miss. -*/ -#define ARM_MPU_ATTR_MEMORY_(NT, WB, RA, WA) \ - (((NT & 1U) << 3U) | ((WB & 1U) << 2U) | ((RA & 1U) << 1U) | (WA & 1U)) - -/** \brief Device memory type non Gathering, non Re-ordering, non Early Write Acknowledgement */ -#define ARM_MPU_ATTR_DEVICE_nGnRnE (0U) - -/** \brief Device memory type non Gathering, non Re-ordering, Early Write Acknowledgement */ -#define ARM_MPU_ATTR_DEVICE_nGnRE (1U) - -/** \brief Device memory type non Gathering, Re-ordering, Early Write Acknowledgement */ -#define ARM_MPU_ATTR_DEVICE_nGRE (2U) - -/** \brief Device memory type Gathering, Re-ordering, Early Write Acknowledgement */ -#define ARM_MPU_ATTR_DEVICE_GRE (3U) - -/** \brief Memory Attribute -* \param O Outer memory attributes -* \param I O == ARM_MPU_ATTR_DEVICE: Device memory attributes, else: Inner memory attributes -*/ -#define ARM_MPU_ATTR(O, I) (((O & 0xFU) << 4U) | (((O & 0xFU) != 0U) ? (I & 0xFU) : ((I & 0x3U) << 2U))) - -/** \brief Normal memory non-shareable */ -#define ARM_MPU_SH_NON (0U) - -/** \brief Normal memory outer shareable */ -#define ARM_MPU_SH_OUTER (2U) - -/** \brief Normal memory inner shareable */ -#define ARM_MPU_SH_INNER (3U) - -/** \brief Memory access permissions -* \param RO Read-Only: Set to 1 for read-only memory. -* \param NP Non-Privileged: Set to 1 for non-privileged memory. -*/ -#define ARM_MPU_AP_(RO, NP) (((RO & 1U) << 1U) | (NP & 1U)) - -/** \brief Region Base Address Register value -* \param BASE The base address bits [31:5] of a memory region. The value is zero extended. Effective address gets 32 byte aligned. -* \param SH Defines the Shareability domain for this memory region. -* \param RO Read-Only: Set to 1 for a read-only memory region. -* \param NP Non-Privileged: Set to 1 for a non-privileged memory region. -* \oaram XN eXecute Never: Set to 1 for a non-executable memory region. -*/ -#define ARM_MPU_RBAR(BASE, SH, RO, NP, XN) \ - ((BASE & MPU_RBAR_BASE_Msk) | \ - ((SH << MPU_RBAR_SH_Pos) & MPU_RBAR_SH_Msk) | \ - ((ARM_MPU_AP_(RO, NP) << MPU_RBAR_AP_Pos) & MPU_RBAR_AP_Msk) | \ - ((XN << MPU_RBAR_XN_Pos) & MPU_RBAR_XN_Msk)) - -/** \brief Region Limit Address Register value -* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. -* \param IDX The attribute index to be associated with this memory region. -*/ -#define ARM_MPU_RLAR(LIMIT, IDX) \ - ((LIMIT & MPU_RLAR_LIMIT_Msk) | \ - ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ - (MPU_RLAR_EN_Msk)) - -/** -* Struct for a single MPU Region -*/ -typedef struct { - uint32_t RBAR; /*!< Region Base Address Register value */ - uint32_t RLAR; /*!< Region Limit Address Register value */ -} ARM_MPU_Region_t; - -/** Enable the MPU. -* \param MPU_Control Default access permissions for unconfigured regions. -*/ -__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) -{ - __DSB(); - __ISB(); - MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; -#ifdef SCB_SHCSR_MEMFAULTENA_Msk - SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; -#endif -} - -/** Disable the MPU. -*/ -__STATIC_INLINE void ARM_MPU_Disable(void) -{ - __DSB(); - __ISB(); -#ifdef SCB_SHCSR_MEMFAULTENA_Msk - SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; -#endif - MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; -} - -#ifdef MPU_NS -/** Enable the Non-secure MPU. -* \param MPU_Control Default access permissions for unconfigured regions. -*/ -__STATIC_INLINE void ARM_MPU_Enable_NS(uint32_t MPU_Control) -{ - __DSB(); - __ISB(); - MPU_NS->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; -#ifdef SCB_SHCSR_MEMFAULTENA_Msk - SCB_NS->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; -#endif -} - -/** Disable the Non-secure MPU. -*/ -__STATIC_INLINE void ARM_MPU_Disable_NS(void) -{ - __DSB(); - __ISB(); -#ifdef SCB_SHCSR_MEMFAULTENA_Msk - SCB_NS->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; -#endif - MPU_NS->CTRL &= ~MPU_CTRL_ENABLE_Msk; -} -#endif - -/** Set the memory attribute encoding to the given MPU. -* \param mpu Pointer to the MPU to be configured. -* \param idx The attribute index to be set [0-7] -* \param attr The attribute value to be set. -*/ -__STATIC_INLINE void ARM_MPU_SetMemAttrEx(MPU_Type* mpu, uint8_t idx, uint8_t attr) -{ - const uint8_t reg = idx / 4U; - const uint32_t pos = ((idx % 4U) * 8U); - const uint32_t mask = 0xFFU << pos; - - if (reg >= (sizeof(mpu->MAIR) / sizeof(mpu->MAIR[0]))) { - return; // invalid index - } - - mpu->MAIR[reg] = ((mpu->MAIR[reg] & ~mask) | ((attr << pos) & mask)); -} - -/** Set the memory attribute encoding. -* \param idx The attribute index to be set [0-7] -* \param attr The attribute value to be set. -*/ -__STATIC_INLINE void ARM_MPU_SetMemAttr(uint8_t idx, uint8_t attr) -{ - ARM_MPU_SetMemAttrEx(MPU, idx, attr); -} - -#ifdef MPU_NS -/** Set the memory attribute encoding to the Non-secure MPU. -* \param idx The attribute index to be set [0-7] -* \param attr The attribute value to be set. -*/ -__STATIC_INLINE void ARM_MPU_SetMemAttr_NS(uint8_t idx, uint8_t attr) -{ - ARM_MPU_SetMemAttrEx(MPU_NS, idx, attr); -} -#endif - -/** Clear and disable the given MPU region of the given MPU. -* \param mpu Pointer to MPU to be used. -* \param rnr Region number to be cleared. -*/ -__STATIC_INLINE void ARM_MPU_ClrRegionEx(MPU_Type* mpu, uint32_t rnr) -{ - mpu->RNR = rnr; - mpu->RLAR = 0U; -} - -/** Clear and disable the given MPU region. -* \param rnr Region number to be cleared. -*/ -__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) -{ - ARM_MPU_ClrRegionEx(MPU, rnr); -} - -#ifdef MPU_NS -/** Clear and disable the given Non-secure MPU region. -* \param rnr Region number to be cleared. -*/ -__STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr) -{ - ARM_MPU_ClrRegionEx(MPU_NS, rnr); -} -#endif - -/** Configure the given MPU region of the given MPU. -* \param mpu Pointer to MPU to be used. -* \param rnr Region number to be configured. -* \param rbar Value for RBAR register. -* \param rlar Value for RLAR register. -*/ -__STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t rbar, uint32_t rlar) -{ - mpu->RNR = rnr; - mpu->RBAR = rbar; - mpu->RLAR = rlar; -} - -/** Configure the given MPU region. -* \param rnr Region number to be configured. -* \param rbar Value for RBAR register. -* \param rlar Value for RLAR register. -*/ -__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rlar) -{ - ARM_MPU_SetRegionEx(MPU, rnr, rbar, rlar); -} - -#ifdef MPU_NS -/** Configure the given Non-secure MPU region. -* \param rnr Region number to be configured. -* \param rbar Value for RBAR register. -* \param rlar Value for RLAR register. -*/ -__STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t rlar) -{ - ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar); -} -#endif - -/** Memcopy with strictly ordered memory access, e.g. for register targets. -* \param dst Destination data is copied to. -* \param src Source data is copied from. -* \param len Amount of data words to be copied. -*/ -__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) -{ - uint32_t i; - for (i = 0U; i < len; ++i) - { - dst[i] = src[i]; - } -} - -/** Load the given number of MPU regions from a table to the given MPU. -* \param mpu Pointer to the MPU registers to be used. -* \param rnr First region number to be configured. -* \param table Pointer to the MPU configuration table. -* \param cnt Amount of regions to be configured. -*/ -__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) -{ - const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; - if (cnt == 1U) { - mpu->RNR = rnr; - orderedCpy(&(mpu->RBAR), &(table->RBAR), rowWordSize); - } else { - uint32_t rnrBase = rnr & ~(MPU_TYPE_RALIASES-1U); - uint32_t rnrOffset = rnr % MPU_TYPE_RALIASES; - - mpu->RNR = rnrBase; - while ((rnrOffset + cnt) > MPU_TYPE_RALIASES) { - uint32_t c = MPU_TYPE_RALIASES - rnrOffset; - orderedCpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), c*rowWordSize); - table += c; - cnt -= c; - rnrOffset = 0U; - rnrBase += MPU_TYPE_RALIASES; - mpu->RNR = rnrBase; - } - - orderedCpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize); - } -} - -/** Load the given number of MPU regions from a table. -* \param rnr First region number to be configured. -* \param table Pointer to the MPU configuration table. -* \param cnt Amount of regions to be configured. -*/ -__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) -{ - ARM_MPU_LoadEx(MPU, rnr, table, cnt); -} - -#ifdef MPU_NS -/** Load the given number of MPU regions from a table to the Non-secure MPU. -* \param rnr First region number to be configured. -* \param table Pointer to the MPU configuration table. -* \param cnt Amount of regions to be configured. -*/ -__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) -{ - ARM_MPU_LoadEx(MPU_NS, rnr, table, cnt); -} -#endif - -#endif - diff --git a/Drivers/tz_context.h b/Drivers/tz_context.h deleted file mode 100644 index d4c1474..0000000 --- a/Drivers/tz_context.h +++ /dev/null @@ -1,70 +0,0 @@ -/****************************************************************************** - * @file tz_context.h - * @brief Context Management for Armv8-M TrustZone - * @version V1.0.1 - * @date 10. January 2018 - ******************************************************************************/ -/* - * Copyright (c) 2017-2018 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef TZ_CONTEXT_H -#define TZ_CONTEXT_H - -#include - -#ifndef TZ_MODULEID_T -#define TZ_MODULEID_T -/// \details Data type that identifies secure software modules called by a process. -typedef uint32_t TZ_ModuleId_t; -#endif - -/// \details TZ Memory ID identifies an allocated memory slot. -typedef uint32_t TZ_MemoryId_t; - -/// Initialize secure context memory system -/// \return execution status (1: success, 0: error) -uint32_t TZ_InitContextSystem_S (void); - -/// Allocate context memory for calling secure software modules in TrustZone -/// \param[in] module identifies software modules called from non-secure mode -/// \return value != 0 id TrustZone memory slot identifier -/// \return value 0 no memory available or internal error -TZ_MemoryId_t TZ_AllocModuleContext_S (TZ_ModuleId_t module); - -/// Free context memory that was previously allocated with \ref TZ_AllocModuleContext_S -/// \param[in] id TrustZone memory slot identifier -/// \return execution status (1: success, 0: error) -uint32_t TZ_FreeModuleContext_S (TZ_MemoryId_t id); - -/// Load secure context (called on RTOS thread context switch) -/// \param[in] id TrustZone memory slot identifier -/// \return execution status (1: success, 0: error) -uint32_t TZ_LoadContext_S (TZ_MemoryId_t id); - -/// Store secure context (called on RTOS thread context switch) -/// \param[in] id TrustZone memory slot identifier -/// \return execution status (1: success, 0: error) -uint32_t TZ_StoreContext_S (TZ_MemoryId_t id); - -#endif // TZ_CONTEXT_H diff --git a/Makefile b/Makefile index 2b04c9f..789cbdd 100644 --- a/Makefile +++ b/Makefile @@ -1,24 +1,23 @@ +include Makefile.conf -OCD_BIN=/opt/local/bin/openocd -OCD_SCRIPTS=/opt/local/share/openocd/scripts -OCD_BOARD=stm32f4discovery.cfg - -.PHONY: all compile run clean +.PHONY: all compile clean all: run -compile: - $(MAKE) -C src - run: compile - $(OCD_BIN) -s $(OCD_SCRIPTS) -f board/$(OCD_BOARD) \ + $(OPENOCD) -s $(OPENOCD_SCRIPTS) -f board/$(OPENOCD_BOARD) \ -c "tcl_port disabled" \ -c "gdb_port disabled" \ -c "program ./src/raw407cxx.elf" \ -c reset \ -c shutdown +compile: + $(MAKE) -C libs/hal + $(MAKE) -C libs/st_usb + $(MAKE) -C src + clean: + $(MAKE) -C libs/hal clean + $(MAKE) -C libs/st_usb clean $(MAKE) -C src clean - $(MAKE) -C Drivers clean - $(MAKE) -C Middlewares clean \ No newline at end of file diff --git a/Makefile.conf b/Makefile.conf index f194858..c660ca6 100644 --- a/Makefile.conf +++ b/Makefile.conf @@ -4,6 +4,9 @@ CXX=/opt/local/bin/arm-none-eabi-g++ LD=/opt/local/bin/arm-none-eabi-g++ AR=/opt/local/bin/arm-none-eabi-ar OBJCOPY=/opt/local/bin/arm-none-eabi-objcopy +OPENOCD=/opt/local/bin/openocd +OPENOCD_SCRIPTS=/opt/local/share/openocd/scripts +OPENOCD_BOARD=stm32f4discovery.cfg # Flags CFLAGS+=\ @@ -14,11 +17,6 @@ CFLAGS+=\ -DSTM32F407xx \ -DUSE_HAL_DRIVER \ -# Includes -CFLAGS+= -I. -CFLAGS+= -I../Drivers -CFLAGS+= -I../Middlewares - # Options CFLAGS+= -fdiagnostics-color=always CFLAGS+= -mfloat-abi=hard @@ -36,4 +34,4 @@ CFLAGS+= -g CXXFLAGS:=$(CFLAGS) CFLAGS+= -std=gnu11 -CXXFLAGS+= -std=c++11 +CXXFLAGS+= -std=c++17 diff --git a/Middlewares/usbd_conf.h b/Middlewares/usbd_conf.h deleted file mode 100644 index d879efa..0000000 --- a/Middlewares/usbd_conf.h +++ /dev/null @@ -1,173 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file : usbd_conf.h - * @version : v1.0_Cube - * @brief : Header for usbd_conf.c file. - ****************************************************************************** - * @attention - * - * Copyright (c) 2023 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __USBD_CONF__H__ -#define __USBD_CONF__H__ - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include -#include -#include -//#include "main.h" -#include "stm32f4xx.h" -#include "stm32f4xx_hal.h" - -/* USER CODE BEGIN INCLUDE */ - -/* USER CODE END INCLUDE */ - -/** @addtogroup USBD_OTG_DRIVER - * @brief Driver for Usb device. - * @{ - */ - -/** @defgroup USBD_CONF USBD_CONF - * @brief Configuration file for Usb otg low level driver. - * @{ - */ - -/** @defgroup USBD_CONF_Exported_Variables USBD_CONF_Exported_Variables - * @brief Public variables. - * @{ - */ - -/** - * @} - */ - -/** @defgroup USBD_CONF_Exported_Defines USBD_CONF_Exported_Defines - * @brief Defines for configuration of the Usb device. - * @{ - */ - -/*---------- -----------*/ -#define USBD_MAX_NUM_INTERFACES 1U -/*---------- -----------*/ -#define USBD_MAX_NUM_CONFIGURATION 1U -/*---------- -----------*/ -#define USBD_MAX_STR_DESC_SIZ 512U -/*---------- -----------*/ -#define USBD_DEBUG_LEVEL 0U -/*---------- -----------*/ -#define USBD_LPM_ENABLED 0U -/*---------- -----------*/ -#define USBD_SELF_POWERED 1U - -/****************************************/ -/* #define for FS and HS identification */ -#define DEVICE_FS 0 -#define DEVICE_HS 1 - -/** - * @} - */ - -/** @defgroup USBD_CONF_Exported_Macros USBD_CONF_Exported_Macros - * @brief Aliases. - * @{ - */ -/* Memory management macros make sure to use static memory allocation */ -/** Alias for memory allocation. */ - -#define USBD_malloc (void *)USBD_static_malloc - -/** Alias for memory release. */ -#define USBD_free USBD_static_free - -/** Alias for memory set. */ -#define USBD_memset memset - -/** Alias for memory copy. */ -#define USBD_memcpy memcpy - -/** Alias for delay. */ -#define USBD_Delay HAL_Delay - -/* DEBUG macros */ - -#if (USBD_DEBUG_LEVEL > 0) -#define USBD_UsrLog(...) printf(__VA_ARGS__);\ - printf("\n"); -#else -#define USBD_UsrLog(...) -#endif /* (USBD_DEBUG_LEVEL > 0U) */ - -#if (USBD_DEBUG_LEVEL > 1) - -#define USBD_ErrLog(...) printf("ERROR: ");\ - printf(__VA_ARGS__);\ - printf("\n"); -#else -#define USBD_ErrLog(...) -#endif /* (USBD_DEBUG_LEVEL > 1U) */ - -#if (USBD_DEBUG_LEVEL > 2) -#define USBD_DbgLog(...) printf("DEBUG : ");\ - printf(__VA_ARGS__);\ - printf("\n"); -#else -#define USBD_DbgLog(...) -#endif /* (USBD_DEBUG_LEVEL > 2U) */ - -/** - * @} - */ - -/** @defgroup USBD_CONF_Exported_Types USBD_CONF_Exported_Types - * @brief Types. - * @{ - */ - -/** - * @} - */ - -/** @defgroup USBD_CONF_Exported_FunctionsPrototype USBD_CONF_Exported_FunctionsPrototype - * @brief Declaration of public functions for Usb device. - * @{ - */ - -/* Exported functions -------------------------------------------------------*/ -void *USBD_static_malloc(uint32_t size); -void USBD_static_free(void *p); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __USBD_CONF__H__ */ - diff --git a/Drivers/cmsis_armclang.h b/libs/cmsis/cmsis_armclang.h similarity index 100% rename from Drivers/cmsis_armclang.h rename to libs/cmsis/cmsis_armclang.h diff --git a/Drivers/cmsis_compiler.h b/libs/cmsis/cmsis_compiler.h similarity index 100% rename from Drivers/cmsis_compiler.h rename to libs/cmsis/cmsis_compiler.h diff --git a/Drivers/cmsis_gcc.h b/libs/cmsis/cmsis_gcc.h similarity index 100% rename from Drivers/cmsis_gcc.h rename to libs/cmsis/cmsis_gcc.h diff --git a/Drivers/cmsis_version.h b/libs/cmsis/cmsis_version.h similarity index 100% rename from Drivers/cmsis_version.h rename to libs/cmsis/cmsis_version.h diff --git a/Drivers/core_cm4.h b/libs/cmsis/core_cm4.h similarity index 100% rename from Drivers/core_cm4.h rename to libs/cmsis/core_cm4.h diff --git a/Drivers/mpu_armv7.h b/libs/cmsis/mpu_armv7.h similarity index 100% rename from Drivers/mpu_armv7.h rename to libs/cmsis/mpu_armv7.h diff --git a/Drivers/stm32f407xx.h b/libs/cmsis/stm32f407xx.h similarity index 100% rename from Drivers/stm32f407xx.h rename to libs/cmsis/stm32f407xx.h diff --git a/Drivers/stm32f4xx.h b/libs/cmsis/stm32f4xx.h similarity index 100% rename from Drivers/stm32f4xx.h rename to libs/cmsis/stm32f4xx.h diff --git a/Drivers/system_stm32f4xx.h b/libs/cmsis/system_stm32f4xx.h similarity index 100% rename from Drivers/system_stm32f4xx.h rename to libs/cmsis/system_stm32f4xx.h diff --git a/Drivers/Legacy/stm32_hal_legacy.h b/libs/hal/Legacy/stm32_hal_legacy.h similarity index 100% rename from Drivers/Legacy/stm32_hal_legacy.h rename to libs/hal/Legacy/stm32_hal_legacy.h diff --git a/Drivers/Makefile b/libs/hal/Makefile similarity index 77% rename from Drivers/Makefile rename to libs/hal/Makefile index 43b54e3..bb65bbc 100644 --- a/Drivers/Makefile +++ b/libs/hal/Makefile @@ -1,7 +1,12 @@ -include ../Makefile.conf +include ../../Makefile.conf TARGET=libcmsis.a +# Includes +CFLAGS+= -I. +CFLAGS+= -I../cmsis + + SRC=$(wildcard *.c) OBJ=$(subst .c,.o,$(SRC)) DEPENDS=$(subst .c,.d,$(SRC)) diff --git a/Drivers/stm32f4xx_hal.c b/libs/hal/stm32f4xx_hal.c similarity index 96% rename from Drivers/stm32f4xx_hal.c rename to libs/hal/stm32f4xx_hal.c index 9977a70..9ba2ba7 100644 --- a/Drivers/stm32f4xx_hal.c +++ b/libs/hal/stm32f4xx_hal.c @@ -1,615 +1,615 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal.c - * @author MCD Application Team - * @brief HAL module driver. - * This is the common part of the HAL initialization - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The common HAL driver contains a set of generic and common APIs that can be - used by the PPP peripheral drivers and the user to start using the HAL. - [..] - The HAL contains two APIs' categories: - (+) Common HAL APIs - (+) Services HAL APIs - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup HAL HAL - * @brief HAL module driver. - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup HAL_Private_Constants - * @{ - */ -/** - * @brief STM32F4xx HAL Driver version number V1.8.1 - */ -#define __STM32F4xx_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */ -#define __STM32F4xx_HAL_VERSION_SUB1 (0x08U) /*!< [23:16] sub1 version */ -#define __STM32F4xx_HAL_VERSION_SUB2 (0x01U) /*!< [15:8] sub2 version */ -#define __STM32F4xx_HAL_VERSION_RC (0x00U) /*!< [7:0] release candidate */ -#define __STM32F4xx_HAL_VERSION ((__STM32F4xx_HAL_VERSION_MAIN << 24U)\ - |(__STM32F4xx_HAL_VERSION_SUB1 << 16U)\ - |(__STM32F4xx_HAL_VERSION_SUB2 << 8U )\ - |(__STM32F4xx_HAL_VERSION_RC)) - -#define IDCODE_DEVID_MASK 0x00000FFFU - -/* ------------ RCC registers bit address in the alias region ----------- */ -#define SYSCFG_OFFSET (SYSCFG_BASE - PERIPH_BASE) -/* --- MEMRMP Register ---*/ -/* Alias word address of UFB_MODE bit */ -#define MEMRMP_OFFSET SYSCFG_OFFSET -#define UFB_MODE_BIT_NUMBER SYSCFG_MEMRMP_UFB_MODE_Pos -#define UFB_MODE_BB (uint32_t)(PERIPH_BB_BASE + (MEMRMP_OFFSET * 32U) + (UFB_MODE_BIT_NUMBER * 4U)) - -/* --- CMPCR Register ---*/ -/* Alias word address of CMP_PD bit */ -#define CMPCR_OFFSET (SYSCFG_OFFSET + 0x20U) -#define CMP_PD_BIT_NUMBER SYSCFG_CMPCR_CMP_PD_Pos -#define CMPCR_CMP_PD_BB (uint32_t)(PERIPH_BB_BASE + (CMPCR_OFFSET * 32U) + (CMP_PD_BIT_NUMBER * 4U)) - -/* --- MCHDLYCR Register ---*/ -/* Alias word address of BSCKSEL bit */ -#define MCHDLYCR_OFFSET (SYSCFG_OFFSET + 0x30U) -#define BSCKSEL_BIT_NUMBER SYSCFG_MCHDLYCR_BSCKSEL_Pos -#define MCHDLYCR_BSCKSEL_BB (uint32_t)(PERIPH_BB_BASE + (MCHDLYCR_OFFSET * 32U) + (BSCKSEL_BIT_NUMBER * 4U)) -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @addtogroup HAL_Private_Variables - * @{ - */ -__IO uint32_t uwTick; -uint32_t uwTickPrio = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */ -HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */ -/** - * @} - */ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup HAL_Exported_Functions HAL Exported Functions - * @{ - */ - -/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions - * @brief Initialization and de-initialization functions - * -@verbatim - =============================================================================== - ##### Initialization and Configuration functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Initializes the Flash interface the NVIC allocation and initial clock - configuration. It initializes the systick also when timeout is needed - and the backup domain when enabled. - (+) De-Initializes common part of the HAL. - (+) Configure the time base source to have 1ms time base with a dedicated - Tick interrupt priority. - (++) SysTick timer is used by default as source of time base, but user - can eventually implement his proper time base source (a general purpose - timer for example or other time source), keeping in mind that Time base - duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and - handled in milliseconds basis. - (++) Time base configuration function (HAL_InitTick ()) is called automatically - at the beginning of the program after reset by HAL_Init() or at any time - when clock is configured, by HAL_RCC_ClockConfig(). - (++) Source of time base is configured to generate interrupts at regular - time intervals. Care must be taken if HAL_Delay() is called from a - peripheral ISR process, the Tick interrupt line must have higher priority - (numerically lower) than the peripheral interrupt. Otherwise the caller - ISR process will be blocked. - (++) functions affecting time base configurations are declared as __weak - to make override possible in case of other implementations in user file. -@endverbatim - * @{ - */ - -/** - * @brief This function is used to initialize the HAL Library; it must be the first - * instruction to be executed in the main program (before to call any other - * HAL function), it performs the following: - * Configure the Flash prefetch, instruction and Data caches. - * Configures the SysTick to generate an interrupt each 1 millisecond, - * which is clocked by the HSI (at this stage, the clock is not yet - * configured and thus the system is running from the internal HSI at 16 MHz). - * Set NVIC Group Priority to 4. - * Calls the HAL_MspInit() callback function defined in user file - * "stm32f4xx_hal_msp.c" to do the global low level hardware initialization - * - * @note SysTick is used as time base for the HAL_Delay() function, the application - * need to ensure that the SysTick time base is always set to 1 millisecond - * to have correct HAL operation. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_Init(void) -{ - /* Configure Flash prefetch, Instruction cache, Data cache */ -#if (INSTRUCTION_CACHE_ENABLE != 0U) - __HAL_FLASH_INSTRUCTION_CACHE_ENABLE(); -#endif /* INSTRUCTION_CACHE_ENABLE */ - -#if (DATA_CACHE_ENABLE != 0U) - __HAL_FLASH_DATA_CACHE_ENABLE(); -#endif /* DATA_CACHE_ENABLE */ - -#if (PREFETCH_ENABLE != 0U) - __HAL_FLASH_PREFETCH_BUFFER_ENABLE(); -#endif /* PREFETCH_ENABLE */ - - /* Set Interrupt Group Priority */ - HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4); - - /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */ - HAL_InitTick(TICK_INT_PRIORITY); - - /* Init the low level hardware */ - HAL_MspInit(); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief This function de-Initializes common part of the HAL and stops the systick. - * This function is optional. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DeInit(void) -{ - /* Reset of all peripherals */ - __HAL_RCC_APB1_FORCE_RESET(); - __HAL_RCC_APB1_RELEASE_RESET(); - - __HAL_RCC_APB2_FORCE_RESET(); - __HAL_RCC_APB2_RELEASE_RESET(); - - __HAL_RCC_AHB1_FORCE_RESET(); - __HAL_RCC_AHB1_RELEASE_RESET(); - - __HAL_RCC_AHB2_FORCE_RESET(); - __HAL_RCC_AHB2_RELEASE_RESET(); - - __HAL_RCC_AHB3_FORCE_RESET(); - __HAL_RCC_AHB3_RELEASE_RESET(); - - /* De-Init the low level hardware */ - HAL_MspDeInit(); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Initialize the MSP. - * @retval None - */ -__weak void HAL_MspInit(void) -{ - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes the MSP. - * @retval None - */ -__weak void HAL_MspDeInit(void) -{ - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief This function configures the source of the time base. - * The time source is configured to have 1ms time base with a dedicated - * Tick interrupt priority. - * @note This function is called automatically at the beginning of program after - * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig(). - * @note In the default implementation, SysTick timer is the source of time base. - * It is used to generate interrupts at regular time intervals. - * Care must be taken if HAL_Delay() is called from a peripheral ISR process, - * The SysTick interrupt must have higher priority (numerically lower) - * than the peripheral interrupt. Otherwise the caller ISR process will be blocked. - * The function is declared as __weak to be overwritten in case of other - * implementation in user file. - * @param TickPriority Tick interrupt priority. - * @retval HAL status - */ -__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) -{ - /* Configure the SysTick to have interrupt in 1ms time basis*/ - if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / uwTickFreq)) > 0U) - { - return HAL_ERROR; - } - - /* Configure the SysTick IRQ priority */ - if (TickPriority < (1UL << __NVIC_PRIO_BITS)) - { - HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U); - uwTickPrio = TickPriority; - } - else - { - return HAL_ERROR; - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions - * @brief HAL Control functions - * -@verbatim - =============================================================================== - ##### HAL Control functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Provide a tick value in millisecond - (+) Provide a blocking delay in millisecond - (+) Suspend the time base source interrupt - (+) Resume the time base source interrupt - (+) Get the HAL API driver version - (+) Get the device identifier - (+) Get the device revision identifier - (+) Enable/Disable Debug module during SLEEP mode - (+) Enable/Disable Debug module during STOP mode - (+) Enable/Disable Debug module during STANDBY mode - -@endverbatim - * @{ - */ - -/** - * @brief This function is called to increment a global variable "uwTick" - * used as application time base. - * @note In the default implementation, this variable is incremented each 1ms - * in SysTick ISR. - * @note This function is declared as __weak to be overwritten in case of other - * implementations in user file. - * @retval None - */ -__weak void HAL_IncTick(void) -{ - uwTick += uwTickFreq; -} - -/** - * @brief Provides a tick value in millisecond. - * @note This function is declared as __weak to be overwritten in case of other - * implementations in user file. - * @retval tick value - */ -__weak uint32_t HAL_GetTick(void) -{ - return uwTick; -} - -/** - * @brief This function returns a tick priority. - * @retval tick priority - */ -uint32_t HAL_GetTickPrio(void) -{ - return uwTickPrio; -} - -/** - * @brief Set new tick Freq. - * @retval Status - */ -HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq) -{ - HAL_StatusTypeDef status = HAL_OK; - HAL_TickFreqTypeDef prevTickFreq; - - assert_param(IS_TICKFREQ(Freq)); - - if (uwTickFreq != Freq) - { - /* Back up uwTickFreq frequency */ - prevTickFreq = uwTickFreq; - - /* Update uwTickFreq global variable used by HAL_InitTick() */ - uwTickFreq = Freq; - - /* Apply the new tick Freq */ - status = HAL_InitTick(uwTickPrio); - - if (status != HAL_OK) - { - /* Restore previous tick frequency */ - uwTickFreq = prevTickFreq; - } - } - - return status; -} - -/** - * @brief Return tick frequency. - * @retval tick period in Hz - */ -HAL_TickFreqTypeDef HAL_GetTickFreq(void) -{ - return uwTickFreq; -} - -/** - * @brief This function provides minimum delay (in milliseconds) based - * on variable incremented. - * @note In the default implementation , SysTick timer is the source of time base. - * It is used to generate interrupts at regular time intervals where uwTick - * is incremented. - * @note This function is declared as __weak to be overwritten in case of other - * implementations in user file. - * @param Delay specifies the delay time length, in milliseconds. - * @retval None - */ -__weak void HAL_Delay(uint32_t Delay) -{ - uint32_t tickstart = HAL_GetTick(); - uint32_t wait = Delay; - - /* Add a freq to guarantee minimum wait */ - if (wait < HAL_MAX_DELAY) - { - wait += (uint32_t)(uwTickFreq); - } - - while((HAL_GetTick() - tickstart) < wait) - { - } -} - -/** - * @brief Suspend Tick increment. - * @note In the default implementation , SysTick timer is the source of time base. It is - * used to generate interrupts at regular time intervals. Once HAL_SuspendTick() - * is called, the SysTick interrupt will be disabled and so Tick increment - * is suspended. - * @note This function is declared as __weak to be overwritten in case of other - * implementations in user file. - * @retval None - */ -__weak void HAL_SuspendTick(void) -{ - /* Disable SysTick Interrupt */ - SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk; -} - -/** - * @brief Resume Tick increment. - * @note In the default implementation , SysTick timer is the source of time base. It is - * used to generate interrupts at regular time intervals. Once HAL_ResumeTick() - * is called, the SysTick interrupt will be enabled and so Tick increment - * is resumed. - * @note This function is declared as __weak to be overwritten in case of other - * implementations in user file. - * @retval None - */ -__weak void HAL_ResumeTick(void) -{ - /* Enable SysTick Interrupt */ - SysTick->CTRL |= SysTick_CTRL_TICKINT_Msk; -} - -/** - * @brief Returns the HAL revision - * @retval version : 0xXYZR (8bits for each decimal, R for RC) - */ -uint32_t HAL_GetHalVersion(void) -{ - return __STM32F4xx_HAL_VERSION; -} - -/** - * @brief Returns the device revision identifier. - * @retval Device revision identifier - */ -uint32_t HAL_GetREVID(void) -{ - return((DBGMCU->IDCODE) >> 16U); -} - -/** - * @brief Returns the device identifier. - * @retval Device identifier - */ -uint32_t HAL_GetDEVID(void) -{ - return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK); -} - -/** - * @brief Enable the Debug Module during SLEEP mode - * @retval None - */ -void HAL_DBGMCU_EnableDBGSleepMode(void) -{ - SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); -} - -/** - * @brief Disable the Debug Module during SLEEP mode - * @retval None - */ -void HAL_DBGMCU_DisableDBGSleepMode(void) -{ - CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); -} - -/** - * @brief Enable the Debug Module during STOP mode - * @retval None - */ -void HAL_DBGMCU_EnableDBGStopMode(void) -{ - SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); -} - -/** - * @brief Disable the Debug Module during STOP mode - * @retval None - */ -void HAL_DBGMCU_DisableDBGStopMode(void) -{ - CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); -} - -/** - * @brief Enable the Debug Module during STANDBY mode - * @retval None - */ -void HAL_DBGMCU_EnableDBGStandbyMode(void) -{ - SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); -} - -/** - * @brief Disable the Debug Module during STANDBY mode - * @retval None - */ -void HAL_DBGMCU_DisableDBGStandbyMode(void) -{ - CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); -} - -/** - * @brief Enables the I/O Compensation Cell. - * @note The I/O compensation cell can be used only when the device supply - * voltage ranges from 2.4 to 3.6 V. - * @retval None - */ -void HAL_EnableCompensationCell(void) -{ - *(__IO uint32_t *)CMPCR_CMP_PD_BB = (uint32_t)ENABLE; -} - -/** - * @brief Power-down the I/O Compensation Cell. - * @note The I/O compensation cell can be used only when the device supply - * voltage ranges from 2.4 to 3.6 V. - * @retval None - */ -void HAL_DisableCompensationCell(void) -{ - *(__IO uint32_t *)CMPCR_CMP_PD_BB = (uint32_t)DISABLE; -} - -/** - * @brief Returns first word of the unique device identifier (UID based on 96 bits) - * @retval Device identifier - */ -uint32_t HAL_GetUIDw0(void) -{ - return (READ_REG(*((uint32_t *)UID_BASE))); -} - -/** - * @brief Returns second word of the unique device identifier (UID based on 96 bits) - * @retval Device identifier - */ -uint32_t HAL_GetUIDw1(void) -{ - return (READ_REG(*((uint32_t *)(UID_BASE + 4U)))); -} - -/** - * @brief Returns third word of the unique device identifier (UID based on 96 bits) - * @retval Device identifier - */ -uint32_t HAL_GetUIDw2(void) -{ - return (READ_REG(*((uint32_t *)(UID_BASE + 8U)))); -} - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) -/** - * @brief Enables the Internal FLASH Bank Swapping. - * - * @note This function can be used only for STM32F42xxx/43xxx/469xx/479xx devices. - * - * @note Flash Bank2 mapped at 0x08000000 (and aliased @0x00000000) - * and Flash Bank1 mapped at 0x08100000 (and aliased at 0x00100000) - * - * @retval None - */ -void HAL_EnableMemorySwappingBank(void) -{ - *(__IO uint32_t *)UFB_MODE_BB = (uint32_t)ENABLE; -} - -/** - * @brief Disables the Internal FLASH Bank Swapping. - * - * @note This function can be used only for STM32F42xxx/43xxx/469xx/479xx devices. - * - * @note The default state : Flash Bank1 mapped at 0x08000000 (and aliased @0x00000000) - * and Flash Bank2 mapped at 0x08100000 (and aliased at 0x00100000) - * - * @retval None - */ -void HAL_DisableMemorySwappingBank(void) -{ - *(__IO uint32_t *)UFB_MODE_BB = (uint32_t)DISABLE; -} -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - - +/** + ****************************************************************************** + * @file stm32f4xx_hal.c + * @author MCD Application Team + * @brief HAL module driver. + * This is the common part of the HAL initialization + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The common HAL driver contains a set of generic and common APIs that can be + used by the PPP peripheral drivers and the user to start using the HAL. + [..] + The HAL contains two APIs' categories: + (+) Common HAL APIs + (+) Services HAL APIs + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup HAL HAL + * @brief HAL module driver. + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup HAL_Private_Constants + * @{ + */ +/** + * @brief STM32F4xx HAL Driver version number V1.8.1 + */ +#define __STM32F4xx_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */ +#define __STM32F4xx_HAL_VERSION_SUB1 (0x08U) /*!< [23:16] sub1 version */ +#define __STM32F4xx_HAL_VERSION_SUB2 (0x01U) /*!< [15:8] sub2 version */ +#define __STM32F4xx_HAL_VERSION_RC (0x00U) /*!< [7:0] release candidate */ +#define __STM32F4xx_HAL_VERSION ((__STM32F4xx_HAL_VERSION_MAIN << 24U)\ + |(__STM32F4xx_HAL_VERSION_SUB1 << 16U)\ + |(__STM32F4xx_HAL_VERSION_SUB2 << 8U )\ + |(__STM32F4xx_HAL_VERSION_RC)) + +#define IDCODE_DEVID_MASK 0x00000FFFU + +/* ------------ RCC registers bit address in the alias region ----------- */ +#define SYSCFG_OFFSET (SYSCFG_BASE - PERIPH_BASE) +/* --- MEMRMP Register ---*/ +/* Alias word address of UFB_MODE bit */ +#define MEMRMP_OFFSET SYSCFG_OFFSET +#define UFB_MODE_BIT_NUMBER SYSCFG_MEMRMP_UFB_MODE_Pos +#define UFB_MODE_BB (uint32_t)(PERIPH_BB_BASE + (MEMRMP_OFFSET * 32U) + (UFB_MODE_BIT_NUMBER * 4U)) + +/* --- CMPCR Register ---*/ +/* Alias word address of CMP_PD bit */ +#define CMPCR_OFFSET (SYSCFG_OFFSET + 0x20U) +#define CMP_PD_BIT_NUMBER SYSCFG_CMPCR_CMP_PD_Pos +#define CMPCR_CMP_PD_BB (uint32_t)(PERIPH_BB_BASE + (CMPCR_OFFSET * 32U) + (CMP_PD_BIT_NUMBER * 4U)) + +/* --- MCHDLYCR Register ---*/ +/* Alias word address of BSCKSEL bit */ +#define MCHDLYCR_OFFSET (SYSCFG_OFFSET + 0x30U) +#define BSCKSEL_BIT_NUMBER SYSCFG_MCHDLYCR_BSCKSEL_Pos +#define MCHDLYCR_BSCKSEL_BB (uint32_t)(PERIPH_BB_BASE + (MCHDLYCR_OFFSET * 32U) + (BSCKSEL_BIT_NUMBER * 4U)) +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @addtogroup HAL_Private_Variables + * @{ + */ +__IO uint32_t uwTick; +uint32_t uwTickPrio = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */ +HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */ +/** + * @} + */ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Functions HAL Exported Functions + * @{ + */ + +/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initializes the Flash interface the NVIC allocation and initial clock + configuration. It initializes the systick also when timeout is needed + and the backup domain when enabled. + (+) De-Initializes common part of the HAL. + (+) Configure the time base source to have 1ms time base with a dedicated + Tick interrupt priority. + (++) SysTick timer is used by default as source of time base, but user + can eventually implement his proper time base source (a general purpose + timer for example or other time source), keeping in mind that Time base + duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and + handled in milliseconds basis. + (++) Time base configuration function (HAL_InitTick ()) is called automatically + at the beginning of the program after reset by HAL_Init() or at any time + when clock is configured, by HAL_RCC_ClockConfig(). + (++) Source of time base is configured to generate interrupts at regular + time intervals. Care must be taken if HAL_Delay() is called from a + peripheral ISR process, the Tick interrupt line must have higher priority + (numerically lower) than the peripheral interrupt. Otherwise the caller + ISR process will be blocked. + (++) functions affecting time base configurations are declared as __weak + to make override possible in case of other implementations in user file. +@endverbatim + * @{ + */ + +/** + * @brief This function is used to initialize the HAL Library; it must be the first + * instruction to be executed in the main program (before to call any other + * HAL function), it performs the following: + * Configure the Flash prefetch, instruction and Data caches. + * Configures the SysTick to generate an interrupt each 1 millisecond, + * which is clocked by the HSI (at this stage, the clock is not yet + * configured and thus the system is running from the internal HSI at 16 MHz). + * Set NVIC Group Priority to 4. + * Calls the HAL_MspInit() callback function defined in user file + * "stm32f4xx_hal_msp.c" to do the global low level hardware initialization + * + * @note SysTick is used as time base for the HAL_Delay() function, the application + * need to ensure that the SysTick time base is always set to 1 millisecond + * to have correct HAL operation. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_Init(void) +{ + /* Configure Flash prefetch, Instruction cache, Data cache */ +#if (INSTRUCTION_CACHE_ENABLE != 0U) + __HAL_FLASH_INSTRUCTION_CACHE_ENABLE(); +#endif /* INSTRUCTION_CACHE_ENABLE */ + +#if (DATA_CACHE_ENABLE != 0U) + __HAL_FLASH_DATA_CACHE_ENABLE(); +#endif /* DATA_CACHE_ENABLE */ + +#if (PREFETCH_ENABLE != 0U) + __HAL_FLASH_PREFETCH_BUFFER_ENABLE(); +#endif /* PREFETCH_ENABLE */ + + /* Set Interrupt Group Priority */ + HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4); + + /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */ + HAL_InitTick(TICK_INT_PRIORITY); + + /* Init the low level hardware */ + HAL_MspInit(); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief This function de-Initializes common part of the HAL and stops the systick. + * This function is optional. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DeInit(void) +{ + /* Reset of all peripherals */ + __HAL_RCC_APB1_FORCE_RESET(); + __HAL_RCC_APB1_RELEASE_RESET(); + + __HAL_RCC_APB2_FORCE_RESET(); + __HAL_RCC_APB2_RELEASE_RESET(); + + __HAL_RCC_AHB1_FORCE_RESET(); + __HAL_RCC_AHB1_RELEASE_RESET(); + + __HAL_RCC_AHB2_FORCE_RESET(); + __HAL_RCC_AHB2_RELEASE_RESET(); + + __HAL_RCC_AHB3_FORCE_RESET(); + __HAL_RCC_AHB3_RELEASE_RESET(); + + /* De-Init the low level hardware */ + HAL_MspDeInit(); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initialize the MSP. + * @retval None + */ +__weak void HAL_MspInit(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes the MSP. + * @retval None + */ +__weak void HAL_MspDeInit(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief This function configures the source of the time base. + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig(). + * @note In the default implementation, SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals. + * Care must be taken if HAL_Delay() is called from a peripheral ISR process, + * The SysTick interrupt must have higher priority (numerically lower) + * than the peripheral interrupt. Otherwise the caller ISR process will be blocked. + * The function is declared as __weak to be overwritten in case of other + * implementation in user file. + * @param TickPriority Tick interrupt priority. + * @retval HAL status + */ +__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + /* Configure the SysTick to have interrupt in 1ms time basis*/ + if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / uwTickFreq)) > 0U) + { + return HAL_ERROR; + } + + /* Configure the SysTick IRQ priority */ + if (TickPriority < (1UL << __NVIC_PRIO_BITS)) + { + HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U); + uwTickPrio = TickPriority; + } + else + { + return HAL_ERROR; + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions + * @brief HAL Control functions + * +@verbatim + =============================================================================== + ##### HAL Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Provide a tick value in millisecond + (+) Provide a blocking delay in millisecond + (+) Suspend the time base source interrupt + (+) Resume the time base source interrupt + (+) Get the HAL API driver version + (+) Get the device identifier + (+) Get the device revision identifier + (+) Enable/Disable Debug module during SLEEP mode + (+) Enable/Disable Debug module during STOP mode + (+) Enable/Disable Debug module during STANDBY mode + +@endverbatim + * @{ + */ + +/** + * @brief This function is called to increment a global variable "uwTick" + * used as application time base. + * @note In the default implementation, this variable is incremented each 1ms + * in SysTick ISR. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_IncTick(void) +{ + uwTick += uwTickFreq; +} + +/** + * @brief Provides a tick value in millisecond. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval tick value + */ +__weak uint32_t HAL_GetTick(void) +{ + return uwTick; +} + +/** + * @brief This function returns a tick priority. + * @retval tick priority + */ +uint32_t HAL_GetTickPrio(void) +{ + return uwTickPrio; +} + +/** + * @brief Set new tick Freq. + * @retval Status + */ +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_TickFreqTypeDef prevTickFreq; + + assert_param(IS_TICKFREQ(Freq)); + + if (uwTickFreq != Freq) + { + /* Back up uwTickFreq frequency */ + prevTickFreq = uwTickFreq; + + /* Update uwTickFreq global variable used by HAL_InitTick() */ + uwTickFreq = Freq; + + /* Apply the new tick Freq */ + status = HAL_InitTick(uwTickPrio); + + if (status != HAL_OK) + { + /* Restore previous tick frequency */ + uwTickFreq = prevTickFreq; + } + } + + return status; +} + +/** + * @brief Return tick frequency. + * @retval tick period in Hz + */ +HAL_TickFreqTypeDef HAL_GetTickFreq(void) +{ + return uwTickFreq; +} + +/** + * @brief This function provides minimum delay (in milliseconds) based + * on variable incremented. + * @note In the default implementation , SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals where uwTick + * is incremented. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @param Delay specifies the delay time length, in milliseconds. + * @retval None + */ +__weak void HAL_Delay(uint32_t Delay) +{ + uint32_t tickstart = HAL_GetTick(); + uint32_t wait = Delay; + + /* Add a freq to guarantee minimum wait */ + if (wait < HAL_MAX_DELAY) + { + wait += (uint32_t)(uwTickFreq); + } + + while((HAL_GetTick() - tickstart) < wait) + { + } +} + +/** + * @brief Suspend Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_SuspendTick() + * is called, the SysTick interrupt will be disabled and so Tick increment + * is suspended. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_SuspendTick(void) +{ + /* Disable SysTick Interrupt */ + SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk; +} + +/** + * @brief Resume Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_ResumeTick() + * is called, the SysTick interrupt will be enabled and so Tick increment + * is resumed. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_ResumeTick(void) +{ + /* Enable SysTick Interrupt */ + SysTick->CTRL |= SysTick_CTRL_TICKINT_Msk; +} + +/** + * @brief Returns the HAL revision + * @retval version : 0xXYZR (8bits for each decimal, R for RC) + */ +uint32_t HAL_GetHalVersion(void) +{ + return __STM32F4xx_HAL_VERSION; +} + +/** + * @brief Returns the device revision identifier. + * @retval Device revision identifier + */ +uint32_t HAL_GetREVID(void) +{ + return((DBGMCU->IDCODE) >> 16U); +} + +/** + * @brief Returns the device identifier. + * @retval Device identifier + */ +uint32_t HAL_GetDEVID(void) +{ + return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK); +} + +/** + * @brief Enable the Debug Module during SLEEP mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGSleepMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @brief Disable the Debug Module during SLEEP mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGSleepMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @brief Enable the Debug Module during STOP mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Disable the Debug Module during STOP mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Enable the Debug Module during STANDBY mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @brief Disable the Debug Module during STANDBY mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @brief Enables the I/O Compensation Cell. + * @note The I/O compensation cell can be used only when the device supply + * voltage ranges from 2.4 to 3.6 V. + * @retval None + */ +void HAL_EnableCompensationCell(void) +{ + *(__IO uint32_t *)CMPCR_CMP_PD_BB = (uint32_t)ENABLE; +} + +/** + * @brief Power-down the I/O Compensation Cell. + * @note The I/O compensation cell can be used only when the device supply + * voltage ranges from 2.4 to 3.6 V. + * @retval None + */ +void HAL_DisableCompensationCell(void) +{ + *(__IO uint32_t *)CMPCR_CMP_PD_BB = (uint32_t)DISABLE; +} + +/** + * @brief Returns first word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw0(void) +{ + return (READ_REG(*((uint32_t *)UID_BASE))); +} + +/** + * @brief Returns second word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw1(void) +{ + return (READ_REG(*((uint32_t *)(UID_BASE + 4U)))); +} + +/** + * @brief Returns third word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw2(void) +{ + return (READ_REG(*((uint32_t *)(UID_BASE + 8U)))); +} + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\ + defined(STM32F469xx) || defined(STM32F479xx) +/** + * @brief Enables the Internal FLASH Bank Swapping. + * + * @note This function can be used only for STM32F42xxx/43xxx/469xx/479xx devices. + * + * @note Flash Bank2 mapped at 0x08000000 (and aliased @0x00000000) + * and Flash Bank1 mapped at 0x08100000 (and aliased at 0x00100000) + * + * @retval None + */ +void HAL_EnableMemorySwappingBank(void) +{ + *(__IO uint32_t *)UFB_MODE_BB = (uint32_t)ENABLE; +} + +/** + * @brief Disables the Internal FLASH Bank Swapping. + * + * @note This function can be used only for STM32F42xxx/43xxx/469xx/479xx devices. + * + * @note The default state : Flash Bank1 mapped at 0x08000000 (and aliased @0x00000000) + * and Flash Bank2 mapped at 0x08100000 (and aliased at 0x00100000) + * + * @retval None + */ +void HAL_DisableMemorySwappingBank(void) +{ + *(__IO uint32_t *)UFB_MODE_BB = (uint32_t)DISABLE; +} +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + diff --git a/Drivers/stm32f4xx_hal.h b/libs/hal/stm32f4xx_hal.h similarity index 97% rename from Drivers/stm32f4xx_hal.h rename to libs/hal/stm32f4xx_hal.h index 5d8cdd3..f7eb847 100644 --- a/Drivers/stm32f4xx_hal.h +++ b/libs/hal/stm32f4xx_hal.h @@ -1,297 +1,297 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal.h - * @author MCD Application Team - * @brief This file contains all the functions prototypes for the HAL - * module driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_H -#define __STM32F4xx_HAL_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_conf.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup HAL - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup HAL_Exported_Constants HAL Exported Constants - * @{ - */ - -/** @defgroup HAL_TICK_FREQ Tick Frequency - * @{ - */ -typedef enum -{ - HAL_TICK_FREQ_10HZ = 100U, - HAL_TICK_FREQ_100HZ = 10U, - HAL_TICK_FREQ_1KHZ = 1U, - HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ -} HAL_TickFreqTypeDef; -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup HAL_Exported_Macros HAL Exported Macros - * @{ - */ - -/** @brief Freeze/Unfreeze Peripherals in Debug mode - */ -#define __HAL_DBGMCU_FREEZE_TIM2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM3() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM4() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM4_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM5() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM5_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM6() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM7() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM12() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM12_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM13() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM13_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM14() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP)) -#define __HAL_DBGMCU_FREEZE_RTC() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP)) -#define __HAL_DBGMCU_FREEZE_WWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP)) -#define __HAL_DBGMCU_FREEZE_IWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP)) -#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_FREEZE_CAN1() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN1_STOP)) -#define __HAL_DBGMCU_FREEZE_CAN2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN2_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM1() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM8() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM8_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM9() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM9_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM10() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM10_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM11() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM11_STOP)) - -#define __HAL_DBGMCU_UNFREEZE_TIM2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM3() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM4() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM4_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM5() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM5_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM6() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM7() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM12() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM12_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM13() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM13_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM14() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP)) -#define __HAL_DBGMCU_UNFREEZE_RTC() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP)) -#define __HAL_DBGMCU_UNFREEZE_WWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP)) -#define __HAL_DBGMCU_UNFREEZE_IWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP)) -#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_UNFREEZE_CAN1() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN1_STOP)) -#define __HAL_DBGMCU_UNFREEZE_CAN2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN2_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM1() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM8() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM8_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM9() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM9_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM10() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM10_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM11() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM11_STOP)) - -/** @brief Main Flash memory mapped at 0x00000000 - */ -#define __HAL_SYSCFG_REMAPMEMORY_FLASH() (SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE)) - -/** @brief System Flash memory mapped at 0x00000000 - */ -#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\ - SYSCFG->MEMRMP |= SYSCFG_MEMRMP_MEM_MODE_0;\ - }while(0); - -/** @brief Embedded SRAM mapped at 0x00000000 - */ -#define __HAL_SYSCFG_REMAPMEMORY_SRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\ - SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_0 | SYSCFG_MEMRMP_MEM_MODE_1);\ - }while(0); - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) -/** @brief FSMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000 - */ -#define __HAL_SYSCFG_REMAPMEMORY_FSMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\ - SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\ - }while(0); -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) -/** @brief FMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000 - */ -#define __HAL_SYSCFG_REMAPMEMORY_FMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\ - SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\ - }while(0); - -/** @brief FMC/SDRAM Bank 1 and 2 mapped at 0x00000000 - */ -#define __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\ - SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_2);\ - }while(0); -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @defgroup Cortex_Lockup_Enable Cortex Lockup Enable - * @{ - */ -/** @brief SYSCFG Break Lockup lock - * Enables and locks the connection of Cortex-M4 LOCKUP (Hardfault) output to TIM1/8 input - * @note The selected configuration is locked and can be unlocked by system reset - */ -#define __HAL_SYSCFG_BREAK_PVD_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_PVD_LOCK); \ - SYSCFG->CFGR2 |= SYSCFG_CFGR2_PVD_LOCK; \ - }while(0) -/** - * @} - */ - -/** @defgroup PVD_Lock_Enable PVD Lock - * @{ - */ -/** @brief SYSCFG Break PVD lock - * Enables and locks the PVD connection with Timer1/8 Break Input, , as well as the PVDE and PLS[2:0] in the PWR_CR register - * @note The selected configuration is locked and can be unlocked by system reset - */ -#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_LOCKUP_LOCK); \ - SYSCFG->CFGR2 |= SYSCFG_CFGR2_LOCKUP_LOCK; \ - }while(0) -/** - * @} - */ -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx || STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** @defgroup HAL_Private_Macros HAL Private Macros - * @{ - */ -#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \ - ((FREQ) == HAL_TICK_FREQ_100HZ) || \ - ((FREQ) == HAL_TICK_FREQ_1KHZ)) -/** - * @} - */ - -/* Exported variables --------------------------------------------------------*/ - -/** @addtogroup HAL_Exported_Variables - * @{ - */ -extern __IO uint32_t uwTick; -extern uint32_t uwTickPrio; -extern HAL_TickFreqTypeDef uwTickFreq; -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup HAL_Exported_Functions - * @{ - */ -/** @addtogroup HAL_Exported_Functions_Group1 - * @{ - */ -/* Initialization and Configuration functions ******************************/ -HAL_StatusTypeDef HAL_Init(void); -HAL_StatusTypeDef HAL_DeInit(void); -void HAL_MspInit(void); -void HAL_MspDeInit(void); -HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority); -/** - * @} - */ - -/** @addtogroup HAL_Exported_Functions_Group2 - * @{ - */ -/* Peripheral Control functions ************************************************/ -void HAL_IncTick(void); -void HAL_Delay(uint32_t Delay); -uint32_t HAL_GetTick(void); -uint32_t HAL_GetTickPrio(void); -HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq); -HAL_TickFreqTypeDef HAL_GetTickFreq(void); -void HAL_SuspendTick(void); -void HAL_ResumeTick(void); -uint32_t HAL_GetHalVersion(void); -uint32_t HAL_GetREVID(void); -uint32_t HAL_GetDEVID(void); -void HAL_DBGMCU_EnableDBGSleepMode(void); -void HAL_DBGMCU_DisableDBGSleepMode(void); -void HAL_DBGMCU_EnableDBGStopMode(void); -void HAL_DBGMCU_DisableDBGStopMode(void); -void HAL_DBGMCU_EnableDBGStandbyMode(void); -void HAL_DBGMCU_DisableDBGStandbyMode(void); -void HAL_EnableCompensationCell(void); -void HAL_DisableCompensationCell(void); -uint32_t HAL_GetUIDw0(void); -uint32_t HAL_GetUIDw1(void); -uint32_t HAL_GetUIDw2(void); -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) -void HAL_EnableMemorySwappingBank(void); -void HAL_DisableMemorySwappingBank(void); -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @defgroup HAL_Private_Variables HAL Private Variables - * @{ - */ -/** - * @} - */ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup HAL_Private_Constants HAL Private Constants - * @{ - */ -/** - * @} - */ -/* Private macros ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_H */ - - +/** + ****************************************************************************** + * @file stm32f4xx_hal.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the HAL + * module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_H +#define __STM32F4xx_HAL_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_conf.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup HAL + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Constants HAL Exported Constants + * @{ + */ + +/** @defgroup HAL_TICK_FREQ Tick Frequency + * @{ + */ +typedef enum +{ + HAL_TICK_FREQ_10HZ = 100U, + HAL_TICK_FREQ_100HZ = 10U, + HAL_TICK_FREQ_1KHZ = 1U, + HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ +} HAL_TickFreqTypeDef; +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup HAL_Exported_Macros HAL Exported Macros + * @{ + */ + +/** @brief Freeze/Unfreeze Peripherals in Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP)) +#define __HAL_DBGMCU_FREEZE_TIM3() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP)) +#define __HAL_DBGMCU_FREEZE_TIM4() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM4_STOP)) +#define __HAL_DBGMCU_FREEZE_TIM5() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM5_STOP)) +#define __HAL_DBGMCU_FREEZE_TIM6() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP)) +#define __HAL_DBGMCU_FREEZE_TIM7() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP)) +#define __HAL_DBGMCU_FREEZE_TIM12() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM12_STOP)) +#define __HAL_DBGMCU_FREEZE_TIM13() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM13_STOP)) +#define __HAL_DBGMCU_FREEZE_TIM14() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP)) +#define __HAL_DBGMCU_FREEZE_RTC() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP)) +#define __HAL_DBGMCU_FREEZE_WWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP)) +#define __HAL_DBGMCU_FREEZE_IWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP)) +#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)) +#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT)) +#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT)) +#define __HAL_DBGMCU_FREEZE_CAN1() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN1_STOP)) +#define __HAL_DBGMCU_FREEZE_CAN2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN2_STOP)) +#define __HAL_DBGMCU_FREEZE_TIM1() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP)) +#define __HAL_DBGMCU_FREEZE_TIM8() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM8_STOP)) +#define __HAL_DBGMCU_FREEZE_TIM9() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM9_STOP)) +#define __HAL_DBGMCU_FREEZE_TIM10() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM10_STOP)) +#define __HAL_DBGMCU_FREEZE_TIM11() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM11_STOP)) + +#define __HAL_DBGMCU_UNFREEZE_TIM2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM3() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM4() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM4_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM5() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM5_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM6() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM7() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM12() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM12_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM13() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM13_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM14() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP)) +#define __HAL_DBGMCU_UNFREEZE_RTC() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP)) +#define __HAL_DBGMCU_UNFREEZE_WWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP)) +#define __HAL_DBGMCU_UNFREEZE_IWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP)) +#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)) +#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT)) +#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT)) +#define __HAL_DBGMCU_UNFREEZE_CAN1() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN1_STOP)) +#define __HAL_DBGMCU_UNFREEZE_CAN2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN2_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM1() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM8() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM8_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM9() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM9_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM10() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM10_STOP)) +#define __HAL_DBGMCU_UNFREEZE_TIM11() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM11_STOP)) + +/** @brief Main Flash memory mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_FLASH() (SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE)) + +/** @brief System Flash memory mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\ + SYSCFG->MEMRMP |= SYSCFG_MEMRMP_MEM_MODE_0;\ + }while(0); + +/** @brief Embedded SRAM mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_SRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\ + SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_0 | SYSCFG_MEMRMP_MEM_MODE_1);\ + }while(0); + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) +/** @brief FSMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_FSMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\ + SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\ + }while(0); +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\ + defined(STM32F469xx) || defined(STM32F479xx) +/** @brief FMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_FMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\ + SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\ + }while(0); + +/** @brief FMC/SDRAM Bank 1 and 2 mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\ + SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_2);\ + }while(0); +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ + +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F413xx) || defined(STM32F423xx) +/** @defgroup Cortex_Lockup_Enable Cortex Lockup Enable + * @{ + */ +/** @brief SYSCFG Break Lockup lock + * Enables and locks the connection of Cortex-M4 LOCKUP (Hardfault) output to TIM1/8 input + * @note The selected configuration is locked and can be unlocked by system reset + */ +#define __HAL_SYSCFG_BREAK_PVD_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_PVD_LOCK); \ + SYSCFG->CFGR2 |= SYSCFG_CFGR2_PVD_LOCK; \ + }while(0) +/** + * @} + */ + +/** @defgroup PVD_Lock_Enable PVD Lock + * @{ + */ +/** @brief SYSCFG Break PVD lock + * Enables and locks the PVD connection with Timer1/8 Break Input, , as well as the PVDE and PLS[2:0] in the PWR_CR register + * @note The selected configuration is locked and can be unlocked by system reset + */ +#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_LOCKUP_LOCK); \ + SYSCFG->CFGR2 |= SYSCFG_CFGR2_LOCKUP_LOCK; \ + }while(0) +/** + * @} + */ +#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx || STM32F413xx || STM32F423xx */ +/** + * @} + */ + +/** @defgroup HAL_Private_Macros HAL Private Macros + * @{ + */ +#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \ + ((FREQ) == HAL_TICK_FREQ_100HZ) || \ + ((FREQ) == HAL_TICK_FREQ_1KHZ)) +/** + * @} + */ + +/* Exported variables --------------------------------------------------------*/ + +/** @addtogroup HAL_Exported_Variables + * @{ + */ +extern __IO uint32_t uwTick; +extern uint32_t uwTickPrio; +extern HAL_TickFreqTypeDef uwTickFreq; +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup HAL_Exported_Functions + * @{ + */ +/** @addtogroup HAL_Exported_Functions_Group1 + * @{ + */ +/* Initialization and Configuration functions ******************************/ +HAL_StatusTypeDef HAL_Init(void); +HAL_StatusTypeDef HAL_DeInit(void); +void HAL_MspInit(void); +void HAL_MspDeInit(void); +HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority); +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions ************************************************/ +void HAL_IncTick(void); +void HAL_Delay(uint32_t Delay); +uint32_t HAL_GetTick(void); +uint32_t HAL_GetTickPrio(void); +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq); +HAL_TickFreqTypeDef HAL_GetTickFreq(void); +void HAL_SuspendTick(void); +void HAL_ResumeTick(void); +uint32_t HAL_GetHalVersion(void); +uint32_t HAL_GetREVID(void); +uint32_t HAL_GetDEVID(void); +void HAL_DBGMCU_EnableDBGSleepMode(void); +void HAL_DBGMCU_DisableDBGSleepMode(void); +void HAL_DBGMCU_EnableDBGStopMode(void); +void HAL_DBGMCU_DisableDBGStopMode(void); +void HAL_DBGMCU_EnableDBGStandbyMode(void); +void HAL_DBGMCU_DisableDBGStandbyMode(void); +void HAL_EnableCompensationCell(void); +void HAL_DisableCompensationCell(void); +uint32_t HAL_GetUIDw0(void); +uint32_t HAL_GetUIDw1(void); +uint32_t HAL_GetUIDw2(void); +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\ + defined(STM32F469xx) || defined(STM32F479xx) +void HAL_EnableMemorySwappingBank(void); +void HAL_DisableMemorySwappingBank(void); +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ +/** + * @} + */ + +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup HAL_Private_Variables HAL Private Variables + * @{ + */ +/** + * @} + */ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup HAL_Private_Constants HAL Private Constants + * @{ + */ +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_H */ + + diff --git a/Drivers/stm32f4xx_hal_conf.h b/libs/hal/stm32f4xx_hal_conf.h similarity index 100% rename from Drivers/stm32f4xx_hal_conf.h rename to libs/hal/stm32f4xx_hal_conf.h diff --git a/Drivers/stm32f4xx_hal_cortex.c b/libs/hal/stm32f4xx_hal_cortex.c similarity index 97% rename from Drivers/stm32f4xx_hal_cortex.c rename to libs/hal/stm32f4xx_hal_cortex.c index 5970852..98515c5 100644 --- a/Drivers/stm32f4xx_hal_cortex.c +++ b/libs/hal/stm32f4xx_hal_cortex.c @@ -1,502 +1,502 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_cortex.c - * @author MCD Application Team - * @brief CORTEX HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the CORTEX: - * + Initialization and de-initialization functions - * + Peripheral Control functions - * - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - - [..] - *** How to configure Interrupts using CORTEX HAL driver *** - =========================================================== - [..] - This section provides functions allowing to configure the NVIC interrupts (IRQ). - The Cortex-M4 exceptions are managed by CMSIS functions. - - (#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping() - function according to the following table. - (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority(). - (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ(). - (#) please refer to programming manual for details in how to configure priority. - - -@- When the NVIC_PRIORITYGROUP_0 is selected, IRQ preemption is no more possible. - The pending IRQ priority will be managed only by the sub priority. - - -@- IRQ priority order (sorted by highest to lowest priority): - (+@) Lowest preemption priority - (+@) Lowest sub priority - (+@) Lowest hardware priority (IRQ number) - - [..] - *** How to configure Systick using CORTEX HAL driver *** - ======================================================== - [..] - Setup SysTick Timer for time base. - - (+) The HAL_SYSTICK_Config() function calls the SysTick_Config() function which - is a CMSIS function that: - (++) Configures the SysTick Reload register with value passed as function parameter. - (++) Configures the SysTick IRQ priority to the lowest value 0x0F. - (++) Resets the SysTick Counter register. - (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK). - (++) Enables the SysTick Interrupt. - (++) Starts the SysTick Counter. - - (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro - __HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the - HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined - inside the stm32f4xx_hal_cortex.h file. - - (+) You can change the SysTick IRQ priority by calling the - HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function - call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function. - - (+) To adjust the SysTick time base, use the following formula: - - Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s) - (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function - (++) Reload Value should not exceed 0xFFFFFF - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup CORTEX CORTEX - * @brief CORTEX HAL module driver - * @{ - */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions - * @{ - */ - - -/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - ============================================================================== - ##### Initialization and de-initialization functions ##### - ============================================================================== - [..] - This section provides the CORTEX HAL driver functions allowing to configure Interrupts - Systick functionalities - -@endverbatim - * @{ - */ - - -/** - * @brief Sets the priority grouping field (preemption priority and subpriority) - * using the required unlock sequence. - * @param PriorityGroup The priority grouping bits length. - * This parameter can be one of the following values: - * @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority - * 4 bits for subpriority - * @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority - * 3 bits for subpriority - * @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority - * 2 bits for subpriority - * @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority - * 1 bits for subpriority - * @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority - * 0 bits for subpriority - * @note When the NVIC_PriorityGroup_0 is selected, IRQ preemption is no more possible. - * The pending IRQ priority will be managed only by the subpriority. - * @retval None - */ -void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup) -{ - /* Check the parameters */ - assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); - - /* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */ - NVIC_SetPriorityGrouping(PriorityGroup); -} - -/** - * @brief Sets the priority of an interrupt. - * @param IRQn External interrupt number. - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) - * @param PreemptPriority The preemption priority for the IRQn channel. - * This parameter can be a value between 0 and 15 - * A lower priority value indicates a higher priority - * @param SubPriority the subpriority level for the IRQ channel. - * This parameter can be a value between 0 and 15 - * A lower priority value indicates a higher priority. - * @retval None - */ -void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t prioritygroup = 0x00U; - - /* Check the parameters */ - assert_param(IS_NVIC_SUB_PRIORITY(SubPriority)); - assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority)); - - prioritygroup = NVIC_GetPriorityGrouping(); - - NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority)); -} - -/** - * @brief Enables a device specific interrupt in the NVIC interrupt controller. - * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig() - * function should be called before. - * @param IRQn External interrupt number. - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) - * @retval None - */ -void HAL_NVIC_EnableIRQ(IRQn_Type IRQn) -{ - /* Check the parameters */ - assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - - /* Enable interrupt */ - NVIC_EnableIRQ(IRQn); -} - -/** - * @brief Disables a device specific interrupt in the NVIC interrupt controller. - * @param IRQn External interrupt number. - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) - * @retval None - */ -void HAL_NVIC_DisableIRQ(IRQn_Type IRQn) -{ - /* Check the parameters */ - assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - - /* Disable interrupt */ - NVIC_DisableIRQ(IRQn); -} - -/** - * @brief Initiates a system reset request to reset the MCU. - * @retval None - */ -void HAL_NVIC_SystemReset(void) -{ - /* System Reset */ - NVIC_SystemReset(); -} - -/** - * @brief Initializes the System Timer and its interrupt, and starts the System Tick Timer. - * Counter is in free running mode to generate periodic interrupts. - * @param TicksNumb Specifies the ticks Number of ticks between two interrupts. - * @retval status: - 0 Function succeeded. - * - 1 Function failed. - */ -uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb) -{ - return SysTick_Config(TicksNumb); -} -/** - * @} - */ - -/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions - * @brief Cortex control functions - * -@verbatim - ============================================================================== - ##### Peripheral Control functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to control the CORTEX - (NVIC, SYSTICK, MPU) functionalities. - - -@endverbatim - * @{ - */ - -#if (__MPU_PRESENT == 1U) -/** - * @brief Disables the MPU - * @retval None - */ -void HAL_MPU_Disable(void) -{ - /* Make sure outstanding transfers are done */ - __DMB(); - - /* Disable fault exceptions */ - SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; - - /* Disable the MPU and clear the control register*/ - MPU->CTRL = 0U; -} - -/** - * @brief Enable the MPU. - * @param MPU_Control Specifies the control mode of the MPU during hard fault, - * NMI, FAULTMASK and privileged access to the default memory - * This parameter can be one of the following values: - * @arg MPU_HFNMI_PRIVDEF_NONE - * @arg MPU_HARDFAULT_NMI - * @arg MPU_PRIVILEGED_DEFAULT - * @arg MPU_HFNMI_PRIVDEF - * @retval None - */ -void HAL_MPU_Enable(uint32_t MPU_Control) -{ - /* Enable the MPU */ - MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; - - /* Enable fault exceptions */ - SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; - - /* Ensure MPU setting take effects */ - __DSB(); - __ISB(); -} - -/** - * @brief Initializes and configures the Region and the memory to be protected. - * @param MPU_Init Pointer to a MPU_Region_InitTypeDef structure that contains - * the initialization and configuration information. - * @retval None - */ -void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init) -{ - /* Check the parameters */ - assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number)); - assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable)); - - /* Set the Region number */ - MPU->RNR = MPU_Init->Number; - - if ((MPU_Init->Enable) != RESET) - { - /* Check the parameters */ - assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec)); - assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission)); - assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField)); - assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable)); - assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable)); - assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable)); - assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable)); - assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size)); - - MPU->RBAR = MPU_Init->BaseAddress; - MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) | - ((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) | - ((uint32_t)MPU_Init->TypeExtField << MPU_RASR_TEX_Pos) | - ((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) | - ((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) | - ((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) | - ((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) | - ((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) | - ((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos); - } - else - { - MPU->RBAR = 0x00U; - MPU->RASR = 0x00U; - } -} -#endif /* __MPU_PRESENT */ - -/** - * @brief Gets the priority grouping field from the NVIC Interrupt Controller. - * @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field) - */ -uint32_t HAL_NVIC_GetPriorityGrouping(void) -{ - /* Get the PRIGROUP[10:8] field value */ - return NVIC_GetPriorityGrouping(); -} - -/** - * @brief Gets the priority of an interrupt. - * @param IRQn External interrupt number. - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) - * @param PriorityGroup the priority grouping bits length. - * This parameter can be one of the following values: - * @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority - * 4 bits for subpriority - * @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority - * 3 bits for subpriority - * @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority - * 2 bits for subpriority - * @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority - * 1 bits for subpriority - * @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority - * 0 bits for subpriority - * @param pPreemptPriority Pointer on the Preemptive priority value (starting from 0). - * @param pSubPriority Pointer on the Subpriority value (starting from 0). - * @retval None - */ -void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority) -{ - /* Check the parameters */ - assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); - /* Get priority for Cortex-M system or device specific interrupts */ - NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority); -} - -/** - * @brief Sets Pending bit of an external interrupt. - * @param IRQn External interrupt number - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) - * @retval None - */ -void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - /* Check the parameters */ - assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - - /* Set interrupt pending */ - NVIC_SetPendingIRQ(IRQn); -} - -/** - * @brief Gets Pending Interrupt (reads the pending register in the NVIC - * and returns the pending bit for the specified interrupt). - * @param IRQn External interrupt number. - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) - * @retval status: - 0 Interrupt status is not pending. - * - 1 Interrupt status is pending. - */ -uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - /* Check the parameters */ - assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - - /* Return 1 if pending else 0 */ - return NVIC_GetPendingIRQ(IRQn); -} - -/** - * @brief Clears the pending bit of an external interrupt. - * @param IRQn External interrupt number. - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) - * @retval None - */ -void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - /* Check the parameters */ - assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - - /* Clear pending interrupt */ - NVIC_ClearPendingIRQ(IRQn); -} - -/** - * @brief Gets active interrupt ( reads the active register in NVIC and returns the active bit). - * @param IRQn External interrupt number - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) - * @retval status: - 0 Interrupt status is not pending. - * - 1 Interrupt status is pending. - */ -uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn) -{ - /* Check the parameters */ - assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - - /* Return 1 if active else 0 */ - return NVIC_GetActive(IRQn); -} - -/** - * @brief Configures the SysTick clock source. - * @param CLKSource specifies the SysTick clock source. - * This parameter can be one of the following values: - * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source. - * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source. - * @retval None - */ -void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource) -{ - /* Check the parameters */ - assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource)); - if (CLKSource == SYSTICK_CLKSOURCE_HCLK) - { - SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK; - } - else - { - SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK; - } -} - -/** - * @brief This function handles SYSTICK interrupt request. - * @retval None - */ -void HAL_SYSTICK_IRQHandler(void) -{ - HAL_SYSTICK_Callback(); -} - -/** - * @brief SYSTICK callback. - * @retval None - */ -__weak void HAL_SYSTICK_Callback(void) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SYSTICK_Callback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_CORTEX_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - +/** + ****************************************************************************** + * @file stm32f4xx_hal_cortex.c + * @author MCD Application Team + * @brief CORTEX HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the CORTEX: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + + [..] + *** How to configure Interrupts using CORTEX HAL driver *** + =========================================================== + [..] + This section provides functions allowing to configure the NVIC interrupts (IRQ). + The Cortex-M4 exceptions are managed by CMSIS functions. + + (#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping() + function according to the following table. + (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority(). + (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ(). + (#) please refer to programming manual for details in how to configure priority. + + -@- When the NVIC_PRIORITYGROUP_0 is selected, IRQ preemption is no more possible. + The pending IRQ priority will be managed only by the sub priority. + + -@- IRQ priority order (sorted by highest to lowest priority): + (+@) Lowest preemption priority + (+@) Lowest sub priority + (+@) Lowest hardware priority (IRQ number) + + [..] + *** How to configure Systick using CORTEX HAL driver *** + ======================================================== + [..] + Setup SysTick Timer for time base. + + (+) The HAL_SYSTICK_Config() function calls the SysTick_Config() function which + is a CMSIS function that: + (++) Configures the SysTick Reload register with value passed as function parameter. + (++) Configures the SysTick IRQ priority to the lowest value 0x0F. + (++) Resets the SysTick Counter register. + (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK). + (++) Enables the SysTick Interrupt. + (++) Starts the SysTick Counter. + + (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro + __HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the + HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined + inside the stm32f4xx_hal_cortex.h file. + + (+) You can change the SysTick IRQ priority by calling the + HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function + call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function. + + (+) To adjust the SysTick time base, use the following formula: + + Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s) + (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function + (++) Reload Value should not exceed 0xFFFFFF + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup CORTEX CORTEX + * @brief CORTEX HAL module driver + * @{ + */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions + * @{ + */ + + +/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] + This section provides the CORTEX HAL driver functions allowing to configure Interrupts + Systick functionalities + +@endverbatim + * @{ + */ + + +/** + * @brief Sets the priority grouping field (preemption priority and subpriority) + * using the required unlock sequence. + * @param PriorityGroup The priority grouping bits length. + * This parameter can be one of the following values: + * @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority + * 4 bits for subpriority + * @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority + * 3 bits for subpriority + * @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority + * 2 bits for subpriority + * @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority + * 1 bits for subpriority + * @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority + * 0 bits for subpriority + * @note When the NVIC_PriorityGroup_0 is selected, IRQ preemption is no more possible. + * The pending IRQ priority will be managed only by the subpriority. + * @retval None + */ +void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + /* Check the parameters */ + assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); + + /* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */ + NVIC_SetPriorityGrouping(PriorityGroup); +} + +/** + * @brief Sets the priority of an interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) + * @param PreemptPriority The preemption priority for the IRQn channel. + * This parameter can be a value between 0 and 15 + * A lower priority value indicates a higher priority + * @param SubPriority the subpriority level for the IRQ channel. + * This parameter can be a value between 0 and 15 + * A lower priority value indicates a higher priority. + * @retval None + */ +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t prioritygroup = 0x00U; + + /* Check the parameters */ + assert_param(IS_NVIC_SUB_PRIORITY(SubPriority)); + assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority)); + + prioritygroup = NVIC_GetPriorityGrouping(); + + NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority)); +} + +/** + * @brief Enables a device specific interrupt in the NVIC interrupt controller. + * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig() + * function should be called before. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) + * @retval None + */ +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Enable interrupt */ + NVIC_EnableIRQ(IRQn); +} + +/** + * @brief Disables a device specific interrupt in the NVIC interrupt controller. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) + * @retval None + */ +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Disable interrupt */ + NVIC_DisableIRQ(IRQn); +} + +/** + * @brief Initiates a system reset request to reset the MCU. + * @retval None + */ +void HAL_NVIC_SystemReset(void) +{ + /* System Reset */ + NVIC_SystemReset(); +} + +/** + * @brief Initializes the System Timer and its interrupt, and starts the System Tick Timer. + * Counter is in free running mode to generate periodic interrupts. + * @param TicksNumb Specifies the ticks Number of ticks between two interrupts. + * @retval status: - 0 Function succeeded. + * - 1 Function failed. + */ +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb) +{ + return SysTick_Config(TicksNumb); +} +/** + * @} + */ + +/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions + * @brief Cortex control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the CORTEX + (NVIC, SYSTICK, MPU) functionalities. + + +@endverbatim + * @{ + */ + +#if (__MPU_PRESENT == 1U) +/** + * @brief Disables the MPU + * @retval None + */ +void HAL_MPU_Disable(void) +{ + /* Make sure outstanding transfers are done */ + __DMB(); + + /* Disable fault exceptions */ + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; + + /* Disable the MPU and clear the control register*/ + MPU->CTRL = 0U; +} + +/** + * @brief Enable the MPU. + * @param MPU_Control Specifies the control mode of the MPU during hard fault, + * NMI, FAULTMASK and privileged access to the default memory + * This parameter can be one of the following values: + * @arg MPU_HFNMI_PRIVDEF_NONE + * @arg MPU_HARDFAULT_NMI + * @arg MPU_PRIVILEGED_DEFAULT + * @arg MPU_HFNMI_PRIVDEF + * @retval None + */ +void HAL_MPU_Enable(uint32_t MPU_Control) +{ + /* Enable the MPU */ + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; + + /* Enable fault exceptions */ + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; + + /* Ensure MPU setting take effects */ + __DSB(); + __ISB(); +} + +/** + * @brief Initializes and configures the Region and the memory to be protected. + * @param MPU_Init Pointer to a MPU_Region_InitTypeDef structure that contains + * the initialization and configuration information. + * @retval None + */ +void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init) +{ + /* Check the parameters */ + assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number)); + assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable)); + + /* Set the Region number */ + MPU->RNR = MPU_Init->Number; + + if ((MPU_Init->Enable) != RESET) + { + /* Check the parameters */ + assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec)); + assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission)); + assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField)); + assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable)); + assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable)); + assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable)); + assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable)); + assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size)); + + MPU->RBAR = MPU_Init->BaseAddress; + MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) | + ((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) | + ((uint32_t)MPU_Init->TypeExtField << MPU_RASR_TEX_Pos) | + ((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) | + ((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) | + ((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) | + ((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) | + ((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) | + ((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos); + } + else + { + MPU->RBAR = 0x00U; + MPU->RASR = 0x00U; + } +} +#endif /* __MPU_PRESENT */ + +/** + * @brief Gets the priority grouping field from the NVIC Interrupt Controller. + * @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field) + */ +uint32_t HAL_NVIC_GetPriorityGrouping(void) +{ + /* Get the PRIGROUP[10:8] field value */ + return NVIC_GetPriorityGrouping(); +} + +/** + * @brief Gets the priority of an interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) + * @param PriorityGroup the priority grouping bits length. + * This parameter can be one of the following values: + * @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority + * 4 bits for subpriority + * @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority + * 3 bits for subpriority + * @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority + * 2 bits for subpriority + * @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority + * 1 bits for subpriority + * @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority + * 0 bits for subpriority + * @param pPreemptPriority Pointer on the Preemptive priority value (starting from 0). + * @param pSubPriority Pointer on the Subpriority value (starting from 0). + * @retval None + */ +void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority) +{ + /* Check the parameters */ + assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); + /* Get priority for Cortex-M system or device specific interrupts */ + NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority); +} + +/** + * @brief Sets Pending bit of an external interrupt. + * @param IRQn External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) + * @retval None + */ +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Set interrupt pending */ + NVIC_SetPendingIRQ(IRQn); +} + +/** + * @brief Gets Pending Interrupt (reads the pending register in the NVIC + * and returns the pending bit for the specified interrupt). + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) + * @retval status: - 0 Interrupt status is not pending. + * - 1 Interrupt status is pending. + */ +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Return 1 if pending else 0 */ + return NVIC_GetPendingIRQ(IRQn); +} + +/** + * @brief Clears the pending bit of an external interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) + * @retval None + */ +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Clear pending interrupt */ + NVIC_ClearPendingIRQ(IRQn); +} + +/** + * @brief Gets active interrupt ( reads the active register in NVIC and returns the active bit). + * @param IRQn External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h)) + * @retval status: - 0 Interrupt status is not pending. + * - 1 Interrupt status is pending. + */ +uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Return 1 if active else 0 */ + return NVIC_GetActive(IRQn); +} + +/** + * @brief Configures the SysTick clock source. + * @param CLKSource specifies the SysTick clock source. + * This parameter can be one of the following values: + * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source. + * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source. + * @retval None + */ +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource) +{ + /* Check the parameters */ + assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource)); + if (CLKSource == SYSTICK_CLKSOURCE_HCLK) + { + SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK; + } + else + { + SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK; + } +} + +/** + * @brief This function handles SYSTICK interrupt request. + * @retval None + */ +void HAL_SYSTICK_IRQHandler(void) +{ + HAL_SYSTICK_Callback(); +} + +/** + * @brief SYSTICK callback. + * @retval None + */ +__weak void HAL_SYSTICK_Callback(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SYSTICK_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_CORTEX_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/stm32f4xx_hal_cortex.h b/libs/hal/stm32f4xx_hal_cortex.h similarity index 97% rename from Drivers/stm32f4xx_hal_cortex.h rename to libs/hal/stm32f4xx_hal_cortex.h index 935be05..fdc96b5 100644 --- a/Drivers/stm32f4xx_hal_cortex.h +++ b/libs/hal/stm32f4xx_hal_cortex.h @@ -1,407 +1,407 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_cortex.h - * @author MCD Application Team - * @brief Header file of CORTEX HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CORTEX_H -#define __STM32F4xx_HAL_CORTEX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup CORTEX - * @{ - */ -/* Exported types ------------------------------------------------------------*/ -/** @defgroup CORTEX_Exported_Types Cortex Exported Types - * @{ - */ - -#if (__MPU_PRESENT == 1U) -/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition - * @brief MPU Region initialization structure - * @{ - */ -typedef struct -{ - uint8_t Enable; /*!< Specifies the status of the region. - This parameter can be a value of @ref CORTEX_MPU_Region_Enable */ - uint8_t Number; /*!< Specifies the number of the region to protect. - This parameter can be a value of @ref CORTEX_MPU_Region_Number */ - uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */ - uint8_t Size; /*!< Specifies the size of the region to protect. - This parameter can be a value of @ref CORTEX_MPU_Region_Size */ - uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ - uint8_t TypeExtField; /*!< Specifies the TEX field level. - This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */ - uint8_t AccessPermission; /*!< Specifies the region access permission type. - This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */ - uint8_t DisableExec; /*!< Specifies the instruction access status. - This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */ - uint8_t IsShareable; /*!< Specifies the shareability status of the protected region. - This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */ - uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected. - This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */ - uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region. - This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */ -}MPU_Region_InitTypeDef; -/** - * @} - */ -#endif /* __MPU_PRESENT */ - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants - * @{ - */ - -/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group - * @{ - */ -#define NVIC_PRIORITYGROUP_0 0x00000007U /*!< 0 bits for pre-emption priority - 4 bits for subpriority */ -#define NVIC_PRIORITYGROUP_1 0x00000006U /*!< 1 bits for pre-emption priority - 3 bits for subpriority */ -#define NVIC_PRIORITYGROUP_2 0x00000005U /*!< 2 bits for pre-emption priority - 2 bits for subpriority */ -#define NVIC_PRIORITYGROUP_3 0x00000004U /*!< 3 bits for pre-emption priority - 1 bits for subpriority */ -#define NVIC_PRIORITYGROUP_4 0x00000003U /*!< 4 bits for pre-emption priority - 0 bits for subpriority */ -/** - * @} - */ - -/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source - * @{ - */ -#define SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U -#define SYSTICK_CLKSOURCE_HCLK 0x00000004U - -/** - * @} - */ - -#if (__MPU_PRESENT == 1) -/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control - * @{ - */ -#define MPU_HFNMI_PRIVDEF_NONE 0x00000000U -#define MPU_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk -#define MPU_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk -#define MPU_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) - -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable - * @{ - */ -#define MPU_REGION_ENABLE ((uint8_t)0x01) -#define MPU_REGION_DISABLE ((uint8_t)0x00) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access - * @{ - */ -#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00) -#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable - * @{ - */ -#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01) -#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable - * @{ - */ -#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01) -#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable - * @{ - */ -#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01) -#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels - * @{ - */ -#define MPU_TEX_LEVEL0 ((uint8_t)0x00) -#define MPU_TEX_LEVEL1 ((uint8_t)0x01) -#define MPU_TEX_LEVEL2 ((uint8_t)0x02) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size - * @{ - */ -#define MPU_REGION_SIZE_32B ((uint8_t)0x04) -#define MPU_REGION_SIZE_64B ((uint8_t)0x05) -#define MPU_REGION_SIZE_128B ((uint8_t)0x06) -#define MPU_REGION_SIZE_256B ((uint8_t)0x07) -#define MPU_REGION_SIZE_512B ((uint8_t)0x08) -#define MPU_REGION_SIZE_1KB ((uint8_t)0x09) -#define MPU_REGION_SIZE_2KB ((uint8_t)0x0A) -#define MPU_REGION_SIZE_4KB ((uint8_t)0x0B) -#define MPU_REGION_SIZE_8KB ((uint8_t)0x0C) -#define MPU_REGION_SIZE_16KB ((uint8_t)0x0D) -#define MPU_REGION_SIZE_32KB ((uint8_t)0x0E) -#define MPU_REGION_SIZE_64KB ((uint8_t)0x0F) -#define MPU_REGION_SIZE_128KB ((uint8_t)0x10) -#define MPU_REGION_SIZE_256KB ((uint8_t)0x11) -#define MPU_REGION_SIZE_512KB ((uint8_t)0x12) -#define MPU_REGION_SIZE_1MB ((uint8_t)0x13) -#define MPU_REGION_SIZE_2MB ((uint8_t)0x14) -#define MPU_REGION_SIZE_4MB ((uint8_t)0x15) -#define MPU_REGION_SIZE_8MB ((uint8_t)0x16) -#define MPU_REGION_SIZE_16MB ((uint8_t)0x17) -#define MPU_REGION_SIZE_32MB ((uint8_t)0x18) -#define MPU_REGION_SIZE_64MB ((uint8_t)0x19) -#define MPU_REGION_SIZE_128MB ((uint8_t)0x1A) -#define MPU_REGION_SIZE_256MB ((uint8_t)0x1B) -#define MPU_REGION_SIZE_512MB ((uint8_t)0x1C) -#define MPU_REGION_SIZE_1GB ((uint8_t)0x1D) -#define MPU_REGION_SIZE_2GB ((uint8_t)0x1E) -#define MPU_REGION_SIZE_4GB ((uint8_t)0x1F) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes - * @{ - */ -#define MPU_REGION_NO_ACCESS ((uint8_t)0x00) -#define MPU_REGION_PRIV_RW ((uint8_t)0x01) -#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02) -#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03) -#define MPU_REGION_PRIV_RO ((uint8_t)0x05) -#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number - * @{ - */ -#define MPU_REGION_NUMBER0 ((uint8_t)0x00) -#define MPU_REGION_NUMBER1 ((uint8_t)0x01) -#define MPU_REGION_NUMBER2 ((uint8_t)0x02) -#define MPU_REGION_NUMBER3 ((uint8_t)0x03) -#define MPU_REGION_NUMBER4 ((uint8_t)0x04) -#define MPU_REGION_NUMBER5 ((uint8_t)0x05) -#define MPU_REGION_NUMBER6 ((uint8_t)0x06) -#define MPU_REGION_NUMBER7 ((uint8_t)0x07) -/** - * @} - */ -#endif /* __MPU_PRESENT */ - -/** - * @} - */ - - -/* Exported Macros -----------------------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup CORTEX_Exported_Functions - * @{ - */ - -/** @addtogroup CORTEX_Exported_Functions_Group1 - * @{ - */ -/* Initialization and de-initialization functions *****************************/ -void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup); -void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority); -void HAL_NVIC_EnableIRQ(IRQn_Type IRQn); -void HAL_NVIC_DisableIRQ(IRQn_Type IRQn); -void HAL_NVIC_SystemReset(void); -uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb); -/** - * @} - */ - -/** @addtogroup CORTEX_Exported_Functions_Group2 - * @{ - */ -/* Peripheral Control functions ***********************************************/ -uint32_t HAL_NVIC_GetPriorityGrouping(void); -void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority); -uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn); -void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn); -void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn); -uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn); -void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource); -void HAL_SYSTICK_IRQHandler(void); -void HAL_SYSTICK_Callback(void); - -#if (__MPU_PRESENT == 1U) -void HAL_MPU_Enable(uint32_t MPU_Control); -void HAL_MPU_Disable(void); -void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init); -#endif /* __MPU_PRESENT */ -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @defgroup CORTEX_Private_Macros CORTEX Private Macros - * @{ - */ -#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \ - ((GROUP) == NVIC_PRIORITYGROUP_1) || \ - ((GROUP) == NVIC_PRIORITYGROUP_2) || \ - ((GROUP) == NVIC_PRIORITYGROUP_3) || \ - ((GROUP) == NVIC_PRIORITYGROUP_4)) - -#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U) - -#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U) - -#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= (IRQn_Type)0x00U) - -#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \ - ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8)) - -#if (__MPU_PRESENT == 1U) -#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \ - ((STATE) == MPU_REGION_DISABLE)) - -#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \ - ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE)) - -#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \ - ((STATE) == MPU_ACCESS_NOT_SHAREABLE)) - -#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \ - ((STATE) == MPU_ACCESS_NOT_CACHEABLE)) - -#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \ - ((STATE) == MPU_ACCESS_NOT_BUFFERABLE)) - -#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \ - ((TYPE) == MPU_TEX_LEVEL1) || \ - ((TYPE) == MPU_TEX_LEVEL2)) - -#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \ - ((TYPE) == MPU_REGION_PRIV_RW) || \ - ((TYPE) == MPU_REGION_PRIV_RW_URO) || \ - ((TYPE) == MPU_REGION_FULL_ACCESS) || \ - ((TYPE) == MPU_REGION_PRIV_RO) || \ - ((TYPE) == MPU_REGION_PRIV_RO_URO)) - -#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \ - ((NUMBER) == MPU_REGION_NUMBER1) || \ - ((NUMBER) == MPU_REGION_NUMBER2) || \ - ((NUMBER) == MPU_REGION_NUMBER3) || \ - ((NUMBER) == MPU_REGION_NUMBER4) || \ - ((NUMBER) == MPU_REGION_NUMBER5) || \ - ((NUMBER) == MPU_REGION_NUMBER6) || \ - ((NUMBER) == MPU_REGION_NUMBER7)) - -#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \ - ((SIZE) == MPU_REGION_SIZE_64B) || \ - ((SIZE) == MPU_REGION_SIZE_128B) || \ - ((SIZE) == MPU_REGION_SIZE_256B) || \ - ((SIZE) == MPU_REGION_SIZE_512B) || \ - ((SIZE) == MPU_REGION_SIZE_1KB) || \ - ((SIZE) == MPU_REGION_SIZE_2KB) || \ - ((SIZE) == MPU_REGION_SIZE_4KB) || \ - ((SIZE) == MPU_REGION_SIZE_8KB) || \ - ((SIZE) == MPU_REGION_SIZE_16KB) || \ - ((SIZE) == MPU_REGION_SIZE_32KB) || \ - ((SIZE) == MPU_REGION_SIZE_64KB) || \ - ((SIZE) == MPU_REGION_SIZE_128KB) || \ - ((SIZE) == MPU_REGION_SIZE_256KB) || \ - ((SIZE) == MPU_REGION_SIZE_512KB) || \ - ((SIZE) == MPU_REGION_SIZE_1MB) || \ - ((SIZE) == MPU_REGION_SIZE_2MB) || \ - ((SIZE) == MPU_REGION_SIZE_4MB) || \ - ((SIZE) == MPU_REGION_SIZE_8MB) || \ - ((SIZE) == MPU_REGION_SIZE_16MB) || \ - ((SIZE) == MPU_REGION_SIZE_32MB) || \ - ((SIZE) == MPU_REGION_SIZE_64MB) || \ - ((SIZE) == MPU_REGION_SIZE_128MB) || \ - ((SIZE) == MPU_REGION_SIZE_256MB) || \ - ((SIZE) == MPU_REGION_SIZE_512MB) || \ - ((SIZE) == MPU_REGION_SIZE_1GB) || \ - ((SIZE) == MPU_REGION_SIZE_2GB) || \ - ((SIZE) == MPU_REGION_SIZE_4GB)) - -#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FF) -#endif /* __MPU_PRESENT */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CORTEX_H */ - - +/** + ****************************************************************************** + * @file stm32f4xx_hal_cortex.h + * @author MCD Application Team + * @brief Header file of CORTEX HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_CORTEX_H +#define __STM32F4xx_HAL_CORTEX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup CORTEX + * @{ + */ +/* Exported types ------------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Types Cortex Exported Types + * @{ + */ + +#if (__MPU_PRESENT == 1U) +/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition + * @brief MPU Region initialization structure + * @{ + */ +typedef struct +{ + uint8_t Enable; /*!< Specifies the status of the region. + This parameter can be a value of @ref CORTEX_MPU_Region_Enable */ + uint8_t Number; /*!< Specifies the number of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Number */ + uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */ + uint8_t Size; /*!< Specifies the size of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Size */ + uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + uint8_t TypeExtField; /*!< Specifies the TEX field level. + This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */ + uint8_t AccessPermission; /*!< Specifies the region access permission type. + This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */ + uint8_t DisableExec; /*!< Specifies the instruction access status. + This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */ + uint8_t IsShareable; /*!< Specifies the shareability status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */ + uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected. + This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */ + uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */ +}MPU_Region_InitTypeDef; +/** + * @} + */ +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants + * @{ + */ + +/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group + * @{ + */ +#define NVIC_PRIORITYGROUP_0 0x00000007U /*!< 0 bits for pre-emption priority + 4 bits for subpriority */ +#define NVIC_PRIORITYGROUP_1 0x00000006U /*!< 1 bits for pre-emption priority + 3 bits for subpriority */ +#define NVIC_PRIORITYGROUP_2 0x00000005U /*!< 2 bits for pre-emption priority + 2 bits for subpriority */ +#define NVIC_PRIORITYGROUP_3 0x00000004U /*!< 3 bits for pre-emption priority + 1 bits for subpriority */ +#define NVIC_PRIORITYGROUP_4 0x00000003U /*!< 4 bits for pre-emption priority + 0 bits for subpriority */ +/** + * @} + */ + +/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source + * @{ + */ +#define SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U +#define SYSTICK_CLKSOURCE_HCLK 0x00000004U + +/** + * @} + */ + +#if (__MPU_PRESENT == 1) +/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control + * @{ + */ +#define MPU_HFNMI_PRIVDEF_NONE 0x00000000U +#define MPU_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk +#define MPU_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk +#define MPU_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) + +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable + * @{ + */ +#define MPU_REGION_ENABLE ((uint8_t)0x01) +#define MPU_REGION_DISABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access + * @{ + */ +#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00) +#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable + * @{ + */ +#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable + * @{ + */ +#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable + * @{ + */ +#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels + * @{ + */ +#define MPU_TEX_LEVEL0 ((uint8_t)0x00) +#define MPU_TEX_LEVEL1 ((uint8_t)0x01) +#define MPU_TEX_LEVEL2 ((uint8_t)0x02) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size + * @{ + */ +#define MPU_REGION_SIZE_32B ((uint8_t)0x04) +#define MPU_REGION_SIZE_64B ((uint8_t)0x05) +#define MPU_REGION_SIZE_128B ((uint8_t)0x06) +#define MPU_REGION_SIZE_256B ((uint8_t)0x07) +#define MPU_REGION_SIZE_512B ((uint8_t)0x08) +#define MPU_REGION_SIZE_1KB ((uint8_t)0x09) +#define MPU_REGION_SIZE_2KB ((uint8_t)0x0A) +#define MPU_REGION_SIZE_4KB ((uint8_t)0x0B) +#define MPU_REGION_SIZE_8KB ((uint8_t)0x0C) +#define MPU_REGION_SIZE_16KB ((uint8_t)0x0D) +#define MPU_REGION_SIZE_32KB ((uint8_t)0x0E) +#define MPU_REGION_SIZE_64KB ((uint8_t)0x0F) +#define MPU_REGION_SIZE_128KB ((uint8_t)0x10) +#define MPU_REGION_SIZE_256KB ((uint8_t)0x11) +#define MPU_REGION_SIZE_512KB ((uint8_t)0x12) +#define MPU_REGION_SIZE_1MB ((uint8_t)0x13) +#define MPU_REGION_SIZE_2MB ((uint8_t)0x14) +#define MPU_REGION_SIZE_4MB ((uint8_t)0x15) +#define MPU_REGION_SIZE_8MB ((uint8_t)0x16) +#define MPU_REGION_SIZE_16MB ((uint8_t)0x17) +#define MPU_REGION_SIZE_32MB ((uint8_t)0x18) +#define MPU_REGION_SIZE_64MB ((uint8_t)0x19) +#define MPU_REGION_SIZE_128MB ((uint8_t)0x1A) +#define MPU_REGION_SIZE_256MB ((uint8_t)0x1B) +#define MPU_REGION_SIZE_512MB ((uint8_t)0x1C) +#define MPU_REGION_SIZE_1GB ((uint8_t)0x1D) +#define MPU_REGION_SIZE_2GB ((uint8_t)0x1E) +#define MPU_REGION_SIZE_4GB ((uint8_t)0x1F) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes + * @{ + */ +#define MPU_REGION_NO_ACCESS ((uint8_t)0x00) +#define MPU_REGION_PRIV_RW ((uint8_t)0x01) +#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02) +#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03) +#define MPU_REGION_PRIV_RO ((uint8_t)0x05) +#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number + * @{ + */ +#define MPU_REGION_NUMBER0 ((uint8_t)0x00) +#define MPU_REGION_NUMBER1 ((uint8_t)0x01) +#define MPU_REGION_NUMBER2 ((uint8_t)0x02) +#define MPU_REGION_NUMBER3 ((uint8_t)0x03) +#define MPU_REGION_NUMBER4 ((uint8_t)0x04) +#define MPU_REGION_NUMBER5 ((uint8_t)0x05) +#define MPU_REGION_NUMBER6 ((uint8_t)0x06) +#define MPU_REGION_NUMBER7 ((uint8_t)0x07) +/** + * @} + */ +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + + +/* Exported Macros -----------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup CORTEX_Exported_Functions + * @{ + */ + +/** @addtogroup CORTEX_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup); +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority); +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn); +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn); +void HAL_NVIC_SystemReset(void); +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb); +/** + * @} + */ + +/** @addtogroup CORTEX_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions ***********************************************/ +uint32_t HAL_NVIC_GetPriorityGrouping(void); +void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority); +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn); +uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn); +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource); +void HAL_SYSTICK_IRQHandler(void); +void HAL_SYSTICK_Callback(void); + +#if (__MPU_PRESENT == 1U) +void HAL_MPU_Enable(uint32_t MPU_Control); +void HAL_MPU_Disable(void); +void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init); +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup CORTEX_Private_Macros CORTEX Private Macros + * @{ + */ +#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \ + ((GROUP) == NVIC_PRIORITYGROUP_1) || \ + ((GROUP) == NVIC_PRIORITYGROUP_2) || \ + ((GROUP) == NVIC_PRIORITYGROUP_3) || \ + ((GROUP) == NVIC_PRIORITYGROUP_4)) + +#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U) + +#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U) + +#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= (IRQn_Type)0x00U) + +#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \ + ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8)) + +#if (__MPU_PRESENT == 1U) +#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \ + ((STATE) == MPU_REGION_DISABLE)) + +#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \ + ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE)) + +#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \ + ((STATE) == MPU_ACCESS_NOT_SHAREABLE)) + +#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \ + ((STATE) == MPU_ACCESS_NOT_CACHEABLE)) + +#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \ + ((STATE) == MPU_ACCESS_NOT_BUFFERABLE)) + +#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \ + ((TYPE) == MPU_TEX_LEVEL1) || \ + ((TYPE) == MPU_TEX_LEVEL2)) + +#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \ + ((TYPE) == MPU_REGION_PRIV_RW) || \ + ((TYPE) == MPU_REGION_PRIV_RW_URO) || \ + ((TYPE) == MPU_REGION_FULL_ACCESS) || \ + ((TYPE) == MPU_REGION_PRIV_RO) || \ + ((TYPE) == MPU_REGION_PRIV_RO_URO)) + +#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \ + ((NUMBER) == MPU_REGION_NUMBER1) || \ + ((NUMBER) == MPU_REGION_NUMBER2) || \ + ((NUMBER) == MPU_REGION_NUMBER3) || \ + ((NUMBER) == MPU_REGION_NUMBER4) || \ + ((NUMBER) == MPU_REGION_NUMBER5) || \ + ((NUMBER) == MPU_REGION_NUMBER6) || \ + ((NUMBER) == MPU_REGION_NUMBER7)) + +#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \ + ((SIZE) == MPU_REGION_SIZE_64B) || \ + ((SIZE) == MPU_REGION_SIZE_128B) || \ + ((SIZE) == MPU_REGION_SIZE_256B) || \ + ((SIZE) == MPU_REGION_SIZE_512B) || \ + ((SIZE) == MPU_REGION_SIZE_1KB) || \ + ((SIZE) == MPU_REGION_SIZE_2KB) || \ + ((SIZE) == MPU_REGION_SIZE_4KB) || \ + ((SIZE) == MPU_REGION_SIZE_8KB) || \ + ((SIZE) == MPU_REGION_SIZE_16KB) || \ + ((SIZE) == MPU_REGION_SIZE_32KB) || \ + ((SIZE) == MPU_REGION_SIZE_64KB) || \ + ((SIZE) == MPU_REGION_SIZE_128KB) || \ + ((SIZE) == MPU_REGION_SIZE_256KB) || \ + ((SIZE) == MPU_REGION_SIZE_512KB) || \ + ((SIZE) == MPU_REGION_SIZE_1MB) || \ + ((SIZE) == MPU_REGION_SIZE_2MB) || \ + ((SIZE) == MPU_REGION_SIZE_4MB) || \ + ((SIZE) == MPU_REGION_SIZE_8MB) || \ + ((SIZE) == MPU_REGION_SIZE_16MB) || \ + ((SIZE) == MPU_REGION_SIZE_32MB) || \ + ((SIZE) == MPU_REGION_SIZE_64MB) || \ + ((SIZE) == MPU_REGION_SIZE_128MB) || \ + ((SIZE) == MPU_REGION_SIZE_256MB) || \ + ((SIZE) == MPU_REGION_SIZE_512MB) || \ + ((SIZE) == MPU_REGION_SIZE_1GB) || \ + ((SIZE) == MPU_REGION_SIZE_2GB) || \ + ((SIZE) == MPU_REGION_SIZE_4GB)) + +#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FF) +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_CORTEX_H */ + + diff --git a/Drivers/stm32f4xx_hal_dac.c b/libs/hal/stm32f4xx_hal_dac.c similarity index 97% rename from Drivers/stm32f4xx_hal_dac.c rename to libs/hal/stm32f4xx_hal_dac.c index ff49c2f..9023e3e 100644 --- a/Drivers/stm32f4xx_hal_dac.c +++ b/libs/hal/stm32f4xx_hal_dac.c @@ -1,1341 +1,1341 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dac.c - * @author MCD Application Team - * @brief DAC HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Digital to Analog Converter (DAC) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral Control functions - * + Peripheral State and Errors functions - * - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### DAC Peripheral features ##### - ============================================================================== - [..] - *** DAC Channels *** - ==================== - [..] - STM32F4 devices integrate two 12-bit Digital Analog Converters - - The 2 converters (i.e. channel1 & channel2) - can be used independently or simultaneously (dual mode): - (#) DAC channel1 with DAC_OUT1 (PA4) as output - (#) DAC channel2 with DAC_OUT2 (PA5) as output - - *** DAC Triggers *** - ==================== - [..] - Digital to Analog conversion can be non-triggered using DAC_TRIGGER_NONE - and DAC_OUT1/DAC_OUT2 is available once writing to DHRx register. - [..] - Digital to Analog conversion can be triggered by: - (#) External event: EXTI Line 9 (any GPIOx_PIN_9) using DAC_TRIGGER_EXT_IT9. - The used pin (GPIOx_PIN_9) must be configured in input mode. - - (#) Timers TRGO: TIM2, TIM4, TIM5, TIM6, TIM7 and TIM8 - (DAC_TRIGGER_T2_TRGO, DAC_TRIGGER_T4_TRGO...) - - (#) Software using DAC_TRIGGER_SOFTWARE - - *** DAC Buffer mode feature *** - =============================== - [..] - Each DAC channel integrates an output buffer that can be used to - reduce the output impedance, and to drive external loads directly - without having to add an external operational amplifier. - To enable, the output buffer use - sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE; - [..] - (@) Refer to the device datasheet for more details about output - impedance value with and without output buffer. - - *** DAC wave generation feature *** - =================================== - [..] - Both DAC channels can be used to generate - (#) Noise wave - (#) Triangle wave - - *** DAC data format *** - ======================= - [..] - The DAC data format can be: - (#) 8-bit right alignment using DAC_ALIGN_8B_R - (#) 12-bit left alignment using DAC_ALIGN_12B_L - (#) 12-bit right alignment using DAC_ALIGN_12B_R - - *** DAC data value to voltage correspondence *** - ================================================ - [..] - The analog output voltage on each DAC channel pin is determined - by the following equation: - [..] - DAC_OUTx = VREF+ * DOR / 4095 - (+) with DOR is the Data Output Register - [..] - VREF+ is the input voltage reference (refer to the device datasheet) - [..] - e.g. To set DAC_OUT1 to 0.7V, use - (+) Assuming that VREF+ = 3.3V, DAC_OUT1 = (3.3 * 868) / 4095 = 0.7V - - *** DMA requests *** - ===================== - [..] - A DMA request can be generated when an external trigger (but not a software trigger) - occurs if DMA1 requests are enabled using HAL_DAC_Start_DMA(). - DMA1 requests are mapped as following: - (#) DAC channel1 mapped on DMA1 Stream5 channel7 which must be - already configured - (#) DAC channel2 mapped on DMA1 Stream6 channel7 which must be - already configured - - [..] - (@) For Dual mode and specific signal (Triangle and noise) generation please - refer to Extended Features Driver description - - ##### How to use this driver ##### - ============================================================================== - [..] - (+) DAC APB clock must be enabled to get write access to DAC - registers using HAL_DAC_Init() - (+) Configure DAC_OUTx (DAC_OUT1: PA4, DAC_OUT2: PA5) in analog mode. - (+) Configure the DAC channel using HAL_DAC_ConfigChannel() function. - (+) Enable the DAC channel using HAL_DAC_Start() or HAL_DAC_Start_DMA() functions. - - - *** Polling mode IO operation *** - ================================= - [..] - (+) Start the DAC peripheral using HAL_DAC_Start() - (+) To read the DAC last data output value, use the HAL_DAC_GetValue() function. - (+) Stop the DAC peripheral using HAL_DAC_Stop() - - *** DMA mode IO operation *** - ============================== - [..] - (+) Start the DAC peripheral using HAL_DAC_Start_DMA(), at this stage the user specify the length - of data to be transferred at each end of conversion - First issued trigger will start the conversion of the value previously set by HAL_DAC_SetValue(). - (+) At the middle of data transfer HAL_DAC_ConvHalfCpltCallbackCh1() or HAL_DACEx_ConvHalfCpltCallbackCh2() - function is executed and user can add his own code by customization of function pointer - HAL_DAC_ConvHalfCpltCallbackCh1() or HAL_DACEx_ConvHalfCpltCallbackCh2() - (+) At The end of data transfer HAL_DAC_ConvCpltCallbackCh1() or HAL_DACEx_ConvHalfCpltCallbackCh2() - function is executed and user can add his own code by customization of function pointer - HAL_DAC_ConvCpltCallbackCh1() or HAL_DACEx_ConvHalfCpltCallbackCh2() - (+) In case of transfer Error, HAL_DAC_ErrorCallbackCh1() function is executed and user can - add his own code by customization of function pointer HAL_DAC_ErrorCallbackCh1 - (+) In case of DMA underrun, DAC interruption triggers and execute internal function HAL_DAC_IRQHandler. - HAL_DAC_DMAUnderrunCallbackCh1() or HAL_DACEx_DMAUnderrunCallbackCh2() - function is executed and user can add his own code by customization of function pointer - HAL_DAC_DMAUnderrunCallbackCh1() or HAL_DACEx_DMAUnderrunCallbackCh2() and - add his own code by customization of function pointer HAL_DAC_ErrorCallbackCh1() - (+) Stop the DAC peripheral using HAL_DAC_Stop_DMA() - - *** Callback registration *** - ============================================= - [..] - The compilation define USE_HAL_DAC_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - - Use Functions HAL_DAC_RegisterCallback() to register a user callback, - it allows to register following callbacks: - (+) ConvCpltCallbackCh1 : callback when a half transfer is completed on Ch1. - (+) ConvHalfCpltCallbackCh1 : callback when a transfer is completed on Ch1. - (+) ErrorCallbackCh1 : callback when an error occurs on Ch1. - (+) DMAUnderrunCallbackCh1 : callback when an underrun error occurs on Ch1. - (+) ConvCpltCallbackCh2 : callback when a half transfer is completed on Ch2. - (+) ConvHalfCpltCallbackCh2 : callback when a transfer is completed on Ch2. - (+) ErrorCallbackCh2 : callback when an error occurs on Ch2. - (+) DMAUnderrunCallbackCh2 : callback when an underrun error occurs on Ch2. - (+) MspInitCallback : DAC MspInit. - (+) MspDeInitCallback : DAC MspdeInit. - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - - Use function HAL_DAC_UnRegisterCallback() to reset a callback to the default - weak (surcharged) function. It allows to reset following callbacks: - (+) ConvCpltCallbackCh1 : callback when a half transfer is completed on Ch1. - (+) ConvHalfCpltCallbackCh1 : callback when a transfer is completed on Ch1. - (+) ErrorCallbackCh1 : callback when an error occurs on Ch1. - (+) DMAUnderrunCallbackCh1 : callback when an underrun error occurs on Ch1. - (+) ConvCpltCallbackCh2 : callback when a half transfer is completed on Ch2. - (+) ConvHalfCpltCallbackCh2 : callback when a transfer is completed on Ch2. - (+) ErrorCallbackCh2 : callback when an error occurs on Ch2. - (+) DMAUnderrunCallbackCh2 : callback when an underrun error occurs on Ch2. - (+) MspInitCallback : DAC MspInit. - (+) MspDeInitCallback : DAC MspdeInit. - (+) All Callbacks - This function) takes as parameters the HAL peripheral handle and the Callback ID. - - By default, after the HAL_DAC_Init and if the state is HAL_DAC_STATE_RESET - all callbacks are reset to the corresponding legacy weak (surcharged) functions. - Exception done for MspInit and MspDeInit callbacks that are respectively - reset to the legacy weak (surcharged) functions in the HAL_DAC_Init - and HAL_DAC_DeInit only when these callbacks are null (not registered beforehand). - If not, MspInit or MspDeInit are not null, the HAL_DAC_Init and HAL_DAC_DeInit - keep and use the user MspInit/MspDeInit callbacks (registered beforehand) - - Callbacks can be registered/unregistered in READY state only. - Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered - in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used - during the Init/DeInit. - In that case first register the MspInit/MspDeInit user callbacks - using HAL_DAC_RegisterCallback before calling HAL_DAC_DeInit - or HAL_DAC_Init function. - - When The compilation define USE_HAL_DAC_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registering feature is not available - and weak (surcharged) callbacks are used. - - *** DAC HAL driver macros list *** - ============================================= - [..] - Below the list of most used macros in DAC HAL driver. - - (+) __HAL_DAC_ENABLE : Enable the DAC peripheral - (+) __HAL_DAC_DISABLE : Disable the DAC peripheral - (+) __HAL_DAC_CLEAR_FLAG: Clear the DAC's pending flags - (+) __HAL_DAC_GET_FLAG: Get the selected DAC's flag status - - [..] - (@) You can refer to the DAC HAL driver header file for more useful macros - -@endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -#ifdef HAL_DAC_MODULE_ENABLED -#if defined(DAC) - -/** @defgroup DAC DAC - * @brief DAC driver modules - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Exported functions -------------------------------------------------------*/ - -/** @defgroup DAC_Exported_Functions DAC Exported Functions - * @{ - */ - -/** @defgroup DAC_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - ============================================================================== - ##### Initialization and de-initialization functions ##### - ============================================================================== - [..] This section provides functions allowing to: - (+) Initialize and configure the DAC. - (+) De-initialize the DAC. - -@endverbatim - * @{ - */ - -/** - * @brief Initialize the DAC peripheral according to the specified parameters - * in the DAC_InitStruct and initialize the associated handle. - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef *hdac) -{ - /* Check DAC handle */ - if (hdac == NULL) - { - return HAL_ERROR; - } - /* Check the parameters */ - assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance)); - - if (hdac->State == HAL_DAC_STATE_RESET) - { -#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) - /* Init the DAC Callback settings */ - hdac->ConvCpltCallbackCh1 = HAL_DAC_ConvCpltCallbackCh1; - hdac->ConvHalfCpltCallbackCh1 = HAL_DAC_ConvHalfCpltCallbackCh1; - hdac->ErrorCallbackCh1 = HAL_DAC_ErrorCallbackCh1; - hdac->DMAUnderrunCallbackCh1 = HAL_DAC_DMAUnderrunCallbackCh1; -#if defined(DAC_CHANNEL2_SUPPORT) - hdac->ConvCpltCallbackCh2 = HAL_DACEx_ConvCpltCallbackCh2; - hdac->ConvHalfCpltCallbackCh2 = HAL_DACEx_ConvHalfCpltCallbackCh2; - hdac->ErrorCallbackCh2 = HAL_DACEx_ErrorCallbackCh2; - hdac->DMAUnderrunCallbackCh2 = HAL_DACEx_DMAUnderrunCallbackCh2; -#endif /* DAC_CHANNEL2_SUPPORT */ - if (hdac->MspInitCallback == NULL) - { - hdac->MspInitCallback = HAL_DAC_MspInit; - } -#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ - - /* Allocate lock resource and initialize it */ - hdac->Lock = HAL_UNLOCKED; - -#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) - /* Init the low level hardware */ - hdac->MspInitCallback(hdac); -#else - /* Init the low level hardware */ - HAL_DAC_MspInit(hdac); -#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ - } - - /* Initialize the DAC state*/ - hdac->State = HAL_DAC_STATE_BUSY; - - /* Set DAC error code to none */ - hdac->ErrorCode = HAL_DAC_ERROR_NONE; - - /* Initialize the DAC state*/ - hdac->State = HAL_DAC_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Deinitialize the DAC peripheral registers to their default reset values. - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef *hdac) -{ - /* Check DAC handle */ - if (hdac == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance)); - - /* Change DAC state */ - hdac->State = HAL_DAC_STATE_BUSY; - -#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) - if (hdac->MspDeInitCallback == NULL) - { - hdac->MspDeInitCallback = HAL_DAC_MspDeInit; - } - /* DeInit the low level hardware */ - hdac->MspDeInitCallback(hdac); -#else - /* DeInit the low level hardware */ - HAL_DAC_MspDeInit(hdac); -#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ - - /* Set DAC error code to none */ - hdac->ErrorCode = HAL_DAC_ERROR_NONE; - - /* Change DAC state */ - hdac->State = HAL_DAC_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(hdac); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Initialize the DAC MSP. - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @retval None - */ -__weak void HAL_DAC_MspInit(DAC_HandleTypeDef *hdac) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdac); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_DAC_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitialize the DAC MSP. - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @retval None - */ -__weak void HAL_DAC_MspDeInit(DAC_HandleTypeDef *hdac) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdac); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_DAC_MspDeInit could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup DAC_Exported_Functions_Group2 IO operation functions - * @brief IO operation functions - * -@verbatim - ============================================================================== - ##### IO operation functions ##### - ============================================================================== - [..] This section provides functions allowing to: - (+) Start conversion. - (+) Stop conversion. - (+) Start conversion and enable DMA transfer. - (+) Stop conversion and disable DMA transfer. - (+) Get result of conversion. - -@endverbatim - * @{ - */ - -/** - * @brief Enables DAC and starts conversion of channel. - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @param Channel The selected DAC channel. - * This parameter can be one of the following values: - * @arg DAC_CHANNEL_1: DAC Channel1 selected - * @arg DAC_CHANNEL_2: DAC Channel2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef *hdac, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(Channel)); - - /* Process locked */ - __HAL_LOCK(hdac); - - /* Change DAC state */ - hdac->State = HAL_DAC_STATE_BUSY; - - /* Enable the Peripheral */ - __HAL_DAC_ENABLE(hdac, Channel); - - if (Channel == DAC_CHANNEL_1) - { - /* Check if software trigger enabled */ - if ((hdac->Instance->CR & (DAC_CR_TEN1 | DAC_CR_TSEL1)) == DAC_TRIGGER_SOFTWARE) - { - /* Enable the selected DAC software conversion */ - SET_BIT(hdac->Instance->SWTRIGR, DAC_SWTRIGR_SWTRIG1); - } - } -#if defined(DAC_CHANNEL2_SUPPORT) - else - { - /* Check if software trigger enabled */ - if ((hdac->Instance->CR & (DAC_CR_TEN2 | DAC_CR_TSEL2)) == (DAC_TRIGGER_SOFTWARE << (Channel & 0x10UL))) - { - /* Enable the selected DAC software conversion*/ - SET_BIT(hdac->Instance->SWTRIGR, DAC_SWTRIGR_SWTRIG2); - } - } -#endif /* DAC_CHANNEL2_SUPPORT */ - - /* Change DAC state */ - hdac->State = HAL_DAC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hdac); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Disables DAC and stop conversion of channel. - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @param Channel The selected DAC channel. - * This parameter can be one of the following values: - * @arg DAC_CHANNEL_1: DAC Channel1 selected - * @arg DAC_CHANNEL_2: DAC Channel2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef *hdac, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(Channel)); - - /* Disable the Peripheral */ - __HAL_DAC_DISABLE(hdac, Channel); - - /* Change DAC state */ - hdac->State = HAL_DAC_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Enables DAC and starts conversion of channel. - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @param Channel The selected DAC channel. - * This parameter can be one of the following values: - * @arg DAC_CHANNEL_1: DAC Channel1 selected - * @arg DAC_CHANNEL_2: DAC Channel2 selected - * @param pData The source Buffer address. - * @param Length The length of data to be transferred from memory to DAC peripheral - * @param Alignment Specifies the data alignment for DAC channel. - * This parameter can be one of the following values: - * @arg DAC_ALIGN_8B_R: 8bit right data alignment selected - * @arg DAC_ALIGN_12B_L: 12bit left data alignment selected - * @arg DAC_ALIGN_12B_R: 12bit right data alignment selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t *pData, uint32_t Length, - uint32_t Alignment) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpreg = 0U; - - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(Channel)); - assert_param(IS_DAC_ALIGN(Alignment)); - - /* Process locked */ - __HAL_LOCK(hdac); - - /* Change DAC state */ - hdac->State = HAL_DAC_STATE_BUSY; - - if (Channel == DAC_CHANNEL_1) - { - /* Set the DMA transfer complete callback for channel1 */ - hdac->DMA_Handle1->XferCpltCallback = DAC_DMAConvCpltCh1; - - /* Set the DMA half transfer complete callback for channel1 */ - hdac->DMA_Handle1->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh1; - - /* Set the DMA error callback for channel1 */ - hdac->DMA_Handle1->XferErrorCallback = DAC_DMAErrorCh1; - - /* Enable the selected DAC channel1 DMA request */ - SET_BIT(hdac->Instance->CR, DAC_CR_DMAEN1); - - /* Case of use of channel 1 */ - switch (Alignment) - { - case DAC_ALIGN_12B_R: - /* Get DHR12R1 address */ - tmpreg = (uint32_t)&hdac->Instance->DHR12R1; - break; - case DAC_ALIGN_12B_L: - /* Get DHR12L1 address */ - tmpreg = (uint32_t)&hdac->Instance->DHR12L1; - break; - case DAC_ALIGN_8B_R: - /* Get DHR8R1 address */ - tmpreg = (uint32_t)&hdac->Instance->DHR8R1; - break; - default: - break; - } - } -#if defined(DAC_CHANNEL2_SUPPORT) - else - { - /* Set the DMA transfer complete callback for channel2 */ - hdac->DMA_Handle2->XferCpltCallback = DAC_DMAConvCpltCh2; - - /* Set the DMA half transfer complete callback for channel2 */ - hdac->DMA_Handle2->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh2; - - /* Set the DMA error callback for channel2 */ - hdac->DMA_Handle2->XferErrorCallback = DAC_DMAErrorCh2; - - /* Enable the selected DAC channel2 DMA request */ - SET_BIT(hdac->Instance->CR, DAC_CR_DMAEN2); - - /* Case of use of channel 2 */ - switch (Alignment) - { - case DAC_ALIGN_12B_R: - /* Get DHR12R2 address */ - tmpreg = (uint32_t)&hdac->Instance->DHR12R2; - break; - case DAC_ALIGN_12B_L: - /* Get DHR12L2 address */ - tmpreg = (uint32_t)&hdac->Instance->DHR12L2; - break; - case DAC_ALIGN_8B_R: - /* Get DHR8R2 address */ - tmpreg = (uint32_t)&hdac->Instance->DHR8R2; - break; - default: - break; - } - } -#endif /* DAC_CHANNEL2_SUPPORT */ - - /* Enable the DMA Stream */ - if (Channel == DAC_CHANNEL_1) - { - /* Enable the DAC DMA underrun interrupt */ - __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR1); - - /* Enable the DMA Stream */ - status = HAL_DMA_Start_IT(hdac->DMA_Handle1, (uint32_t)pData, tmpreg, Length); - } -#if defined(DAC_CHANNEL2_SUPPORT) - else - { - /* Enable the DAC DMA underrun interrupt */ - __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR2); - - /* Enable the DMA Stream */ - status = HAL_DMA_Start_IT(hdac->DMA_Handle2, (uint32_t)pData, tmpreg, Length); - } -#endif /* DAC_CHANNEL2_SUPPORT */ - - /* Process Unlocked */ - __HAL_UNLOCK(hdac); - - if (status == HAL_OK) - { - /* Enable the Peripheral */ - __HAL_DAC_ENABLE(hdac, Channel); - } - else - { - hdac->ErrorCode |= HAL_DAC_ERROR_DMA; - } - - /* Return function status */ - return status; -} - -/** - * @brief Disables DAC and stop conversion of channel. - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @param Channel The selected DAC channel. - * This parameter can be one of the following values: - * @arg DAC_CHANNEL_1: DAC Channel1 selected - * @arg DAC_CHANNEL_2: DAC Channel2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(Channel)); - - /* Disable the selected DAC channel DMA request */ - hdac->Instance->CR &= ~(DAC_CR_DMAEN1 << (Channel & 0x10UL)); - - /* Disable the Peripheral */ - __HAL_DAC_DISABLE(hdac, Channel); - - /* Disable the DMA Stream */ - - /* Channel1 is used */ - if (Channel == DAC_CHANNEL_1) - { - /* Disable the DMA Stream */ - (void)HAL_DMA_Abort(hdac->DMA_Handle1); - - /* Disable the DAC DMA underrun interrupt */ - __HAL_DAC_DISABLE_IT(hdac, DAC_IT_DMAUDR1); - } -#if defined(DAC_CHANNEL2_SUPPORT) - else /* Channel2 is used for */ - { - /* Disable the DMA Stream */ - (void)HAL_DMA_Abort(hdac->DMA_Handle2); - - /* Disable the DAC DMA underrun interrupt */ - __HAL_DAC_DISABLE_IT(hdac, DAC_IT_DMAUDR2); - } -#endif /* DAC_CHANNEL2_SUPPORT */ - - /* Change DAC state */ - hdac->State = HAL_DAC_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Handles DAC interrupt request - * This function uses the interruption of DMA - * underrun. - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @retval None - */ -void HAL_DAC_IRQHandler(DAC_HandleTypeDef *hdac) -{ - if (__HAL_DAC_GET_IT_SOURCE(hdac, DAC_IT_DMAUDR1)) - { - /* Check underrun flag of DAC channel 1 */ - if (__HAL_DAC_GET_FLAG(hdac, DAC_FLAG_DMAUDR1)) - { - /* Change DAC state to error state */ - hdac->State = HAL_DAC_STATE_ERROR; - - /* Set DAC error code to channel1 DMA underrun error */ - SET_BIT(hdac->ErrorCode, HAL_DAC_ERROR_DMAUNDERRUNCH1); - - /* Clear the underrun flag */ - __HAL_DAC_CLEAR_FLAG(hdac, DAC_FLAG_DMAUDR1); - - /* Disable the selected DAC channel1 DMA request */ - CLEAR_BIT(hdac->Instance->CR, DAC_CR_DMAEN1); - - /* Error callback */ -#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) - hdac->DMAUnderrunCallbackCh1(hdac); -#else - HAL_DAC_DMAUnderrunCallbackCh1(hdac); -#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ - } - } - -#if defined(DAC_CHANNEL2_SUPPORT) - if (__HAL_DAC_GET_IT_SOURCE(hdac, DAC_IT_DMAUDR2)) - { - /* Check underrun flag of DAC channel 2 */ - if (__HAL_DAC_GET_FLAG(hdac, DAC_FLAG_DMAUDR2)) - { - /* Change DAC state to error state */ - hdac->State = HAL_DAC_STATE_ERROR; - - /* Set DAC error code to channel2 DMA underrun error */ - SET_BIT(hdac->ErrorCode, HAL_DAC_ERROR_DMAUNDERRUNCH2); - - /* Clear the underrun flag */ - __HAL_DAC_CLEAR_FLAG(hdac, DAC_FLAG_DMAUDR2); - - /* Disable the selected DAC channel2 DMA request */ - CLEAR_BIT(hdac->Instance->CR, DAC_CR_DMAEN2); - - /* Error callback */ -#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) - hdac->DMAUnderrunCallbackCh2(hdac); -#else - HAL_DACEx_DMAUnderrunCallbackCh2(hdac); -#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ - } - } -#endif /* DAC_CHANNEL2_SUPPORT */ -} - -/** - * @brief Set the specified data holding register value for DAC channel. - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @param Channel The selected DAC channel. - * This parameter can be one of the following values: - * @arg DAC_CHANNEL_1: DAC Channel1 selected - * @arg DAC_CHANNEL_2: DAC Channel2 selected - * @param Alignment Specifies the data alignment. - * This parameter can be one of the following values: - * @arg DAC_ALIGN_8B_R: 8bit right data alignment selected - * @arg DAC_ALIGN_12B_L: 12bit left data alignment selected - * @arg DAC_ALIGN_12B_R: 12bit right data alignment selected - * @param Data Data to be loaded in the selected data holding register. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data) -{ - __IO uint32_t tmp = 0UL; - - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(Channel)); - assert_param(IS_DAC_ALIGN(Alignment)); - assert_param(IS_DAC_DATA(Data)); - - tmp = (uint32_t)hdac->Instance; - if (Channel == DAC_CHANNEL_1) - { - tmp += DAC_DHR12R1_ALIGNMENT(Alignment); - } -#if defined(DAC_CHANNEL2_SUPPORT) - else - { - tmp += DAC_DHR12R2_ALIGNMENT(Alignment); - } -#endif /* DAC_CHANNEL2_SUPPORT */ - - /* Set the DAC channel selected data holding register */ - *(__IO uint32_t *) tmp = Data; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Conversion complete callback in non-blocking mode for Channel1 - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @retval None - */ -__weak void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef *hdac) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdac); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_DAC_ConvCpltCallbackCh1 could be implemented in the user file - */ -} - -/** - * @brief Conversion half DMA transfer callback in non-blocking mode for Channel1 - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @retval None - */ -__weak void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef *hdac) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdac); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_DAC_ConvHalfCpltCallbackCh1 could be implemented in the user file - */ -} - -/** - * @brief Error DAC callback for Channel1. - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @retval None - */ -__weak void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdac); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_DAC_ErrorCallbackCh1 could be implemented in the user file - */ -} - -/** - * @brief DMA underrun DAC callback for channel1. - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @retval None - */ -__weak void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdac); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_DAC_DMAUnderrunCallbackCh1 could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup DAC_Exported_Functions_Group3 Peripheral Control functions - * @brief Peripheral Control functions - * -@verbatim - ============================================================================== - ##### Peripheral Control functions ##### - ============================================================================== - [..] This section provides functions allowing to: - (+) Configure channels. - (+) Set the specified data holding register value for DAC channel. - -@endverbatim - * @{ - */ - -/** - * @brief Returns the last data output value of the selected DAC channel. - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @param Channel The selected DAC channel. - * This parameter can be one of the following values: - * @arg DAC_CHANNEL_1: DAC Channel1 selected - * @arg DAC_CHANNEL_2: DAC Channel2 selected - * @retval The selected DAC channel data output value. - */ -uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef *hdac, uint32_t Channel) -{ - uint32_t result = 0; - - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(Channel)); - - if (Channel == DAC_CHANNEL_1) - { - result = hdac->Instance->DOR1; - } -#if defined(DAC_CHANNEL2_SUPPORT) - else - { - result = hdac->Instance->DOR2; - } -#endif /* DAC_CHANNEL2_SUPPORT */ - /* Returns the DAC channel data output register value */ - return result; -} - -/** - * @brief Configures the selected DAC channel. - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @param sConfig DAC configuration structure. - * @param Channel The selected DAC channel. - * This parameter can be one of the following values: - * @arg DAC_CHANNEL_1: DAC Channel1 selected - * @arg DAC_CHANNEL_2: DAC Channel2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef *hdac, DAC_ChannelConfTypeDef *sConfig, uint32_t Channel) -{ - uint32_t tmpreg1; - uint32_t tmpreg2; - - /* Check the DAC parameters */ - assert_param(IS_DAC_TRIGGER(sConfig->DAC_Trigger)); - assert_param(IS_DAC_OUTPUT_BUFFER_STATE(sConfig->DAC_OutputBuffer)); - assert_param(IS_DAC_CHANNEL(Channel)); - - /* Process locked */ - __HAL_LOCK(hdac); - - /* Change DAC state */ - hdac->State = HAL_DAC_STATE_BUSY; - - /* Get the DAC CR value */ - tmpreg1 = hdac->Instance->CR; - /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */ - tmpreg1 &= ~(((uint32_t)(DAC_CR_MAMP1 | DAC_CR_WAVE1 | DAC_CR_TSEL1 | DAC_CR_TEN1 | DAC_CR_BOFF1)) << (Channel & 0x10UL)); - /* Configure for the selected DAC channel: buffer output, trigger */ - /* Set TSELx and TENx bits according to DAC_Trigger value */ - /* Set BOFFx bit according to DAC_OutputBuffer value */ - tmpreg2 = (sConfig->DAC_Trigger | sConfig->DAC_OutputBuffer); - /* Calculate CR register value depending on DAC_Channel */ - tmpreg1 |= tmpreg2 << (Channel & 0x10UL); - /* Write to DAC CR */ - hdac->Instance->CR = tmpreg1; - /* Disable wave generation */ - CLEAR_BIT(hdac->Instance->CR, (DAC_CR_WAVE1 << (Channel & 0x10UL))); - - /* Change DAC state */ - hdac->State = HAL_DAC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hdac); - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup DAC_Exported_Functions_Group4 Peripheral State and Errors functions - * @brief Peripheral State and Errors functions - * -@verbatim - ============================================================================== - ##### Peripheral State and Errors functions ##### - ============================================================================== - [..] - This subsection provides functions allowing to - (+) Check the DAC state. - (+) Check the DAC Errors. - -@endverbatim - * @{ - */ - -/** - * @brief return the DAC handle state - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @retval HAL state - */ -HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef *hdac) -{ - /* Return DAC handle state */ - return hdac->State; -} - - -/** - * @brief Return the DAC error code - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @retval DAC Error Code - */ -uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac) -{ - return hdac->ErrorCode; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup DAC_Exported_Functions - * @{ - */ - -/** @addtogroup DAC_Exported_Functions_Group1 - * @{ - */ -#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User DAC Callback - * To be used instead of the weak (surcharged) predefined callback - * @param hdac DAC handle - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_DAC_ERROR_INVALID_CALLBACK DAC Error Callback ID - * @arg @ref HAL_DAC_CH1_COMPLETE_CB_ID DAC CH1 Complete Callback ID - * @arg @ref HAL_DAC_CH1_HALF_COMPLETE_CB_ID DAC CH1 Half Complete Callback ID - * @arg @ref HAL_DAC_CH1_ERROR_ID DAC CH1 Error Callback ID - * @arg @ref HAL_DAC_CH1_UNDERRUN_CB_ID DAC CH1 UnderRun Callback ID - * @arg @ref HAL_DAC_CH2_COMPLETE_CB_ID DAC CH2 Complete Callback ID - * @arg @ref HAL_DAC_CH2_HALF_COMPLETE_CB_ID DAC CH2 Half Complete Callback ID - * @arg @ref HAL_DAC_CH2_ERROR_ID DAC CH2 Error Callback ID - * @arg @ref HAL_DAC_CH2_UNDERRUN_CB_ID DAC CH2 UnderRun Callback ID - * @arg @ref HAL_DAC_MSPINIT_CB_ID DAC MSP Init Callback ID - * @arg @ref HAL_DAC_MSPDEINIT_CB_ID DAC MSP DeInit Callback ID - * - * @param pCallback pointer to the Callback function - * @retval status - */ -HAL_StatusTypeDef HAL_DAC_RegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID, - pDAC_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hdac); - - if (hdac->State == HAL_DAC_STATE_READY) - { - switch (CallbackID) - { - case HAL_DAC_CH1_COMPLETE_CB_ID : - hdac->ConvCpltCallbackCh1 = pCallback; - break; - case HAL_DAC_CH1_HALF_COMPLETE_CB_ID : - hdac->ConvHalfCpltCallbackCh1 = pCallback; - break; - case HAL_DAC_CH1_ERROR_ID : - hdac->ErrorCallbackCh1 = pCallback; - break; - case HAL_DAC_CH1_UNDERRUN_CB_ID : - hdac->DMAUnderrunCallbackCh1 = pCallback; - break; -#if defined(DAC_CHANNEL2_SUPPORT) - case HAL_DAC_CH2_COMPLETE_CB_ID : - hdac->ConvCpltCallbackCh2 = pCallback; - break; - case HAL_DAC_CH2_HALF_COMPLETE_CB_ID : - hdac->ConvHalfCpltCallbackCh2 = pCallback; - break; - case HAL_DAC_CH2_ERROR_ID : - hdac->ErrorCallbackCh2 = pCallback; - break; - case HAL_DAC_CH2_UNDERRUN_CB_ID : - hdac->DMAUnderrunCallbackCh2 = pCallback; - break; -#endif /* DAC_CHANNEL2_SUPPORT */ - case HAL_DAC_MSPINIT_CB_ID : - hdac->MspInitCallback = pCallback; - break; - case HAL_DAC_MSPDEINIT_CB_ID : - hdac->MspDeInitCallback = pCallback; - break; - default : - /* Update the error code */ - hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - break; - } - } - else if (hdac->State == HAL_DAC_STATE_RESET) - { - switch (CallbackID) - { - case HAL_DAC_MSPINIT_CB_ID : - hdac->MspInitCallback = pCallback; - break; - case HAL_DAC_MSPDEINIT_CB_ID : - hdac->MspDeInitCallback = pCallback; - break; - default : - /* Update the error code */ - hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hdac); - return status; -} - -/** - * @brief Unregister a User DAC Callback - * DAC Callback is redirected to the weak (surcharged) predefined callback - * @param hdac DAC handle - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg @ref HAL_DAC_CH1_COMPLETE_CB_ID DAC CH1 transfer Complete Callback ID - * @arg @ref HAL_DAC_CH1_HALF_COMPLETE_CB_ID DAC CH1 Half Complete Callback ID - * @arg @ref HAL_DAC_CH1_ERROR_ID DAC CH1 Error Callback ID - * @arg @ref HAL_DAC_CH1_UNDERRUN_CB_ID DAC CH1 UnderRun Callback ID - * @arg @ref HAL_DAC_CH2_COMPLETE_CB_ID DAC CH2 Complete Callback ID - * @arg @ref HAL_DAC_CH2_HALF_COMPLETE_CB_ID DAC CH2 Half Complete Callback ID - * @arg @ref HAL_DAC_CH2_ERROR_ID DAC CH2 Error Callback ID - * @arg @ref HAL_DAC_CH2_UNDERRUN_CB_ID DAC CH2 UnderRun Callback ID - * @arg @ref HAL_DAC_MSPINIT_CB_ID DAC MSP Init Callback ID - * @arg @ref HAL_DAC_MSPDEINIT_CB_ID DAC MSP DeInit Callback ID - * @arg @ref HAL_DAC_ALL_CB_ID DAC All callbacks - * @retval status - */ -HAL_StatusTypeDef HAL_DAC_UnRegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hdac); - - if (hdac->State == HAL_DAC_STATE_READY) - { - switch (CallbackID) - { - case HAL_DAC_CH1_COMPLETE_CB_ID : - hdac->ConvCpltCallbackCh1 = HAL_DAC_ConvCpltCallbackCh1; - break; - case HAL_DAC_CH1_HALF_COMPLETE_CB_ID : - hdac->ConvHalfCpltCallbackCh1 = HAL_DAC_ConvHalfCpltCallbackCh1; - break; - case HAL_DAC_CH1_ERROR_ID : - hdac->ErrorCallbackCh1 = HAL_DAC_ErrorCallbackCh1; - break; - case HAL_DAC_CH1_UNDERRUN_CB_ID : - hdac->DMAUnderrunCallbackCh1 = HAL_DAC_DMAUnderrunCallbackCh1; - break; -#if defined(DAC_CHANNEL2_SUPPORT) - case HAL_DAC_CH2_COMPLETE_CB_ID : - hdac->ConvCpltCallbackCh2 = HAL_DACEx_ConvCpltCallbackCh2; - break; - case HAL_DAC_CH2_HALF_COMPLETE_CB_ID : - hdac->ConvHalfCpltCallbackCh2 = HAL_DACEx_ConvHalfCpltCallbackCh2; - break; - case HAL_DAC_CH2_ERROR_ID : - hdac->ErrorCallbackCh2 = HAL_DACEx_ErrorCallbackCh2; - break; - case HAL_DAC_CH2_UNDERRUN_CB_ID : - hdac->DMAUnderrunCallbackCh2 = HAL_DACEx_DMAUnderrunCallbackCh2; - break; -#endif /* DAC_CHANNEL2_SUPPORT */ - case HAL_DAC_MSPINIT_CB_ID : - hdac->MspInitCallback = HAL_DAC_MspInit; - break; - case HAL_DAC_MSPDEINIT_CB_ID : - hdac->MspDeInitCallback = HAL_DAC_MspDeInit; - break; - case HAL_DAC_ALL_CB_ID : - hdac->ConvCpltCallbackCh1 = HAL_DAC_ConvCpltCallbackCh1; - hdac->ConvHalfCpltCallbackCh1 = HAL_DAC_ConvHalfCpltCallbackCh1; - hdac->ErrorCallbackCh1 = HAL_DAC_ErrorCallbackCh1; - hdac->DMAUnderrunCallbackCh1 = HAL_DAC_DMAUnderrunCallbackCh1; -#if defined(DAC_CHANNEL2_SUPPORT) - hdac->ConvCpltCallbackCh2 = HAL_DACEx_ConvCpltCallbackCh2; - hdac->ConvHalfCpltCallbackCh2 = HAL_DACEx_ConvHalfCpltCallbackCh2; - hdac->ErrorCallbackCh2 = HAL_DACEx_ErrorCallbackCh2; - hdac->DMAUnderrunCallbackCh2 = HAL_DACEx_DMAUnderrunCallbackCh2; -#endif /* DAC_CHANNEL2_SUPPORT */ - hdac->MspInitCallback = HAL_DAC_MspInit; - hdac->MspDeInitCallback = HAL_DAC_MspDeInit; - break; - default : - /* Update the error code */ - hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - break; - } - } - else if (hdac->State == HAL_DAC_STATE_RESET) - { - switch (CallbackID) - { - case HAL_DAC_MSPINIT_CB_ID : - hdac->MspInitCallback = HAL_DAC_MspInit; - break; - case HAL_DAC_MSPDEINIT_CB_ID : - hdac->MspDeInitCallback = HAL_DAC_MspDeInit; - break; - default : - /* Update the error code */ - hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; - /* update return status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hdac); - return status; -} -#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup DAC_Private_Functions - * @{ - */ - -/** - * @brief DMA conversion complete callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma) -{ - DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - -#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) - hdac->ConvCpltCallbackCh1(hdac); -#else - HAL_DAC_ConvCpltCallbackCh1(hdac); -#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ - - hdac->State = HAL_DAC_STATE_READY; -} - -/** - * @brief DMA half transfer complete callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma) -{ - DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - /* Conversion complete callback */ -#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) - hdac->ConvHalfCpltCallbackCh1(hdac); -#else - HAL_DAC_ConvHalfCpltCallbackCh1(hdac); -#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA error callback - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma) -{ - DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - /* Set DAC error code to DMA error */ - hdac->ErrorCode |= HAL_DAC_ERROR_DMA; - -#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) - hdac->ErrorCallbackCh1(hdac); -#else - HAL_DAC_ErrorCallbackCh1(hdac); -#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ - - hdac->State = HAL_DAC_STATE_READY; -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* DAC */ - -#endif /* HAL_DAC_MODULE_ENABLED */ - -/** - * @} - */ - +/** + ****************************************************************************** + * @file stm32f4xx_hal_dac.c + * @author MCD Application Team + * @brief DAC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Digital to Analog Converter (DAC) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Errors functions + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### DAC Peripheral features ##### + ============================================================================== + [..] + *** DAC Channels *** + ==================== + [..] + STM32F4 devices integrate two 12-bit Digital Analog Converters + + The 2 converters (i.e. channel1 & channel2) + can be used independently or simultaneously (dual mode): + (#) DAC channel1 with DAC_OUT1 (PA4) as output + (#) DAC channel2 with DAC_OUT2 (PA5) as output + + *** DAC Triggers *** + ==================== + [..] + Digital to Analog conversion can be non-triggered using DAC_TRIGGER_NONE + and DAC_OUT1/DAC_OUT2 is available once writing to DHRx register. + [..] + Digital to Analog conversion can be triggered by: + (#) External event: EXTI Line 9 (any GPIOx_PIN_9) using DAC_TRIGGER_EXT_IT9. + The used pin (GPIOx_PIN_9) must be configured in input mode. + + (#) Timers TRGO: TIM2, TIM4, TIM5, TIM6, TIM7 and TIM8 + (DAC_TRIGGER_T2_TRGO, DAC_TRIGGER_T4_TRGO...) + + (#) Software using DAC_TRIGGER_SOFTWARE + + *** DAC Buffer mode feature *** + =============================== + [..] + Each DAC channel integrates an output buffer that can be used to + reduce the output impedance, and to drive external loads directly + without having to add an external operational amplifier. + To enable, the output buffer use + sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE; + [..] + (@) Refer to the device datasheet for more details about output + impedance value with and without output buffer. + + *** DAC wave generation feature *** + =================================== + [..] + Both DAC channels can be used to generate + (#) Noise wave + (#) Triangle wave + + *** DAC data format *** + ======================= + [..] + The DAC data format can be: + (#) 8-bit right alignment using DAC_ALIGN_8B_R + (#) 12-bit left alignment using DAC_ALIGN_12B_L + (#) 12-bit right alignment using DAC_ALIGN_12B_R + + *** DAC data value to voltage correspondence *** + ================================================ + [..] + The analog output voltage on each DAC channel pin is determined + by the following equation: + [..] + DAC_OUTx = VREF+ * DOR / 4095 + (+) with DOR is the Data Output Register + [..] + VREF+ is the input voltage reference (refer to the device datasheet) + [..] + e.g. To set DAC_OUT1 to 0.7V, use + (+) Assuming that VREF+ = 3.3V, DAC_OUT1 = (3.3 * 868) / 4095 = 0.7V + + *** DMA requests *** + ===================== + [..] + A DMA request can be generated when an external trigger (but not a software trigger) + occurs if DMA1 requests are enabled using HAL_DAC_Start_DMA(). + DMA1 requests are mapped as following: + (#) DAC channel1 mapped on DMA1 Stream5 channel7 which must be + already configured + (#) DAC channel2 mapped on DMA1 Stream6 channel7 which must be + already configured + + [..] + (@) For Dual mode and specific signal (Triangle and noise) generation please + refer to Extended Features Driver description + + ##### How to use this driver ##### + ============================================================================== + [..] + (+) DAC APB clock must be enabled to get write access to DAC + registers using HAL_DAC_Init() + (+) Configure DAC_OUTx (DAC_OUT1: PA4, DAC_OUT2: PA5) in analog mode. + (+) Configure the DAC channel using HAL_DAC_ConfigChannel() function. + (+) Enable the DAC channel using HAL_DAC_Start() or HAL_DAC_Start_DMA() functions. + + + *** Polling mode IO operation *** + ================================= + [..] + (+) Start the DAC peripheral using HAL_DAC_Start() + (+) To read the DAC last data output value, use the HAL_DAC_GetValue() function. + (+) Stop the DAC peripheral using HAL_DAC_Stop() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Start the DAC peripheral using HAL_DAC_Start_DMA(), at this stage the user specify the length + of data to be transferred at each end of conversion + First issued trigger will start the conversion of the value previously set by HAL_DAC_SetValue(). + (+) At the middle of data transfer HAL_DAC_ConvHalfCpltCallbackCh1() or HAL_DACEx_ConvHalfCpltCallbackCh2() + function is executed and user can add his own code by customization of function pointer + HAL_DAC_ConvHalfCpltCallbackCh1() or HAL_DACEx_ConvHalfCpltCallbackCh2() + (+) At The end of data transfer HAL_DAC_ConvCpltCallbackCh1() or HAL_DACEx_ConvHalfCpltCallbackCh2() + function is executed and user can add his own code by customization of function pointer + HAL_DAC_ConvCpltCallbackCh1() or HAL_DACEx_ConvHalfCpltCallbackCh2() + (+) In case of transfer Error, HAL_DAC_ErrorCallbackCh1() function is executed and user can + add his own code by customization of function pointer HAL_DAC_ErrorCallbackCh1 + (+) In case of DMA underrun, DAC interruption triggers and execute internal function HAL_DAC_IRQHandler. + HAL_DAC_DMAUnderrunCallbackCh1() or HAL_DACEx_DMAUnderrunCallbackCh2() + function is executed and user can add his own code by customization of function pointer + HAL_DAC_DMAUnderrunCallbackCh1() or HAL_DACEx_DMAUnderrunCallbackCh2() and + add his own code by customization of function pointer HAL_DAC_ErrorCallbackCh1() + (+) Stop the DAC peripheral using HAL_DAC_Stop_DMA() + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_DAC_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + Use Functions HAL_DAC_RegisterCallback() to register a user callback, + it allows to register following callbacks: + (+) ConvCpltCallbackCh1 : callback when a half transfer is completed on Ch1. + (+) ConvHalfCpltCallbackCh1 : callback when a transfer is completed on Ch1. + (+) ErrorCallbackCh1 : callback when an error occurs on Ch1. + (+) DMAUnderrunCallbackCh1 : callback when an underrun error occurs on Ch1. + (+) ConvCpltCallbackCh2 : callback when a half transfer is completed on Ch2. + (+) ConvHalfCpltCallbackCh2 : callback when a transfer is completed on Ch2. + (+) ErrorCallbackCh2 : callback when an error occurs on Ch2. + (+) DMAUnderrunCallbackCh2 : callback when an underrun error occurs on Ch2. + (+) MspInitCallback : DAC MspInit. + (+) MspDeInitCallback : DAC MspdeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function HAL_DAC_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. It allows to reset following callbacks: + (+) ConvCpltCallbackCh1 : callback when a half transfer is completed on Ch1. + (+) ConvHalfCpltCallbackCh1 : callback when a transfer is completed on Ch1. + (+) ErrorCallbackCh1 : callback when an error occurs on Ch1. + (+) DMAUnderrunCallbackCh1 : callback when an underrun error occurs on Ch1. + (+) ConvCpltCallbackCh2 : callback when a half transfer is completed on Ch2. + (+) ConvHalfCpltCallbackCh2 : callback when a transfer is completed on Ch2. + (+) ErrorCallbackCh2 : callback when an error occurs on Ch2. + (+) DMAUnderrunCallbackCh2 : callback when an underrun error occurs on Ch2. + (+) MspInitCallback : DAC MspInit. + (+) MspDeInitCallback : DAC MspdeInit. + (+) All Callbacks + This function) takes as parameters the HAL peripheral handle and the Callback ID. + + By default, after the HAL_DAC_Init and if the state is HAL_DAC_STATE_RESET + all callbacks are reset to the corresponding legacy weak (surcharged) functions. + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (surcharged) functions in the HAL_DAC_Init + and HAL_DAC_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_DAC_Init and HAL_DAC_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_DAC_RegisterCallback before calling HAL_DAC_DeInit + or HAL_DAC_Init function. + + When The compilation define USE_HAL_DAC_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + *** DAC HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in DAC HAL driver. + + (+) __HAL_DAC_ENABLE : Enable the DAC peripheral + (+) __HAL_DAC_DISABLE : Disable the DAC peripheral + (+) __HAL_DAC_CLEAR_FLAG: Clear the DAC's pending flags + (+) __HAL_DAC_GET_FLAG: Get the selected DAC's flag status + + [..] + (@) You can refer to the DAC HAL driver header file for more useful macros + +@endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +#ifdef HAL_DAC_MODULE_ENABLED +#if defined(DAC) + +/** @defgroup DAC DAC + * @brief DAC driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions -------------------------------------------------------*/ + +/** @defgroup DAC_Exported_Functions DAC Exported Functions + * @{ + */ + +/** @defgroup DAC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the DAC. + (+) De-initialize the DAC. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the DAC peripheral according to the specified parameters + * in the DAC_InitStruct and initialize the associated handle. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef *hdac) +{ + /* Check DAC handle */ + if (hdac == NULL) + { + return HAL_ERROR; + } + /* Check the parameters */ + assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance)); + + if (hdac->State == HAL_DAC_STATE_RESET) + { +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + /* Init the DAC Callback settings */ + hdac->ConvCpltCallbackCh1 = HAL_DAC_ConvCpltCallbackCh1; + hdac->ConvHalfCpltCallbackCh1 = HAL_DAC_ConvHalfCpltCallbackCh1; + hdac->ErrorCallbackCh1 = HAL_DAC_ErrorCallbackCh1; + hdac->DMAUnderrunCallbackCh1 = HAL_DAC_DMAUnderrunCallbackCh1; +#if defined(DAC_CHANNEL2_SUPPORT) + hdac->ConvCpltCallbackCh2 = HAL_DACEx_ConvCpltCallbackCh2; + hdac->ConvHalfCpltCallbackCh2 = HAL_DACEx_ConvHalfCpltCallbackCh2; + hdac->ErrorCallbackCh2 = HAL_DACEx_ErrorCallbackCh2; + hdac->DMAUnderrunCallbackCh2 = HAL_DACEx_DMAUnderrunCallbackCh2; +#endif /* DAC_CHANNEL2_SUPPORT */ + if (hdac->MspInitCallback == NULL) + { + hdac->MspInitCallback = HAL_DAC_MspInit; + } +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + + /* Allocate lock resource and initialize it */ + hdac->Lock = HAL_UNLOCKED; + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + /* Init the low level hardware */ + hdac->MspInitCallback(hdac); +#else + /* Init the low level hardware */ + HAL_DAC_MspInit(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + } + + /* Initialize the DAC state*/ + hdac->State = HAL_DAC_STATE_BUSY; + + /* Set DAC error code to none */ + hdac->ErrorCode = HAL_DAC_ERROR_NONE; + + /* Initialize the DAC state*/ + hdac->State = HAL_DAC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Deinitialize the DAC peripheral registers to their default reset values. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef *hdac) +{ + /* Check DAC handle */ + if (hdac == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance)); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + if (hdac->MspDeInitCallback == NULL) + { + hdac->MspDeInitCallback = HAL_DAC_MspDeInit; + } + /* DeInit the low level hardware */ + hdac->MspDeInitCallback(hdac); +#else + /* DeInit the low level hardware */ + HAL_DAC_MspDeInit(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + + /* Set DAC error code to none */ + hdac->ErrorCode = HAL_DAC_ERROR_NONE; + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hdac); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initialize the DAC MSP. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_MspInit(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DAC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the DAC MSP. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_MspDeInit(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DAC_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup DAC_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Start conversion. + (+) Stop conversion. + (+) Start conversion and enable DMA transfer. + (+) Stop conversion and disable DMA transfer. + (+) Get result of conversion. + +@endverbatim + * @{ + */ + +/** + * @brief Enables DAC and starts conversion of channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef *hdac, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + + /* Process locked */ + __HAL_LOCK(hdac); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + + /* Enable the Peripheral */ + __HAL_DAC_ENABLE(hdac, Channel); + + if (Channel == DAC_CHANNEL_1) + { + /* Check if software trigger enabled */ + if ((hdac->Instance->CR & (DAC_CR_TEN1 | DAC_CR_TSEL1)) == DAC_TRIGGER_SOFTWARE) + { + /* Enable the selected DAC software conversion */ + SET_BIT(hdac->Instance->SWTRIGR, DAC_SWTRIGR_SWTRIG1); + } + } +#if defined(DAC_CHANNEL2_SUPPORT) + else + { + /* Check if software trigger enabled */ + if ((hdac->Instance->CR & (DAC_CR_TEN2 | DAC_CR_TSEL2)) == (DAC_TRIGGER_SOFTWARE << (Channel & 0x10UL))) + { + /* Enable the selected DAC software conversion*/ + SET_BIT(hdac->Instance->SWTRIGR, DAC_SWTRIGR_SWTRIG2); + } + } +#endif /* DAC_CHANNEL2_SUPPORT */ + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdac); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Disables DAC and stop conversion of channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef *hdac, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + + /* Disable the Peripheral */ + __HAL_DAC_DISABLE(hdac, Channel); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Enables DAC and starts conversion of channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to DAC peripheral + * @param Alignment Specifies the data alignment for DAC channel. + * This parameter can be one of the following values: + * @arg DAC_ALIGN_8B_R: 8bit right data alignment selected + * @arg DAC_ALIGN_12B_L: 12bit left data alignment selected + * @arg DAC_ALIGN_12B_R: 12bit right data alignment selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t *pData, uint32_t Length, + uint32_t Alignment) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpreg = 0U; + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + assert_param(IS_DAC_ALIGN(Alignment)); + + /* Process locked */ + __HAL_LOCK(hdac); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + + if (Channel == DAC_CHANNEL_1) + { + /* Set the DMA transfer complete callback for channel1 */ + hdac->DMA_Handle1->XferCpltCallback = DAC_DMAConvCpltCh1; + + /* Set the DMA half transfer complete callback for channel1 */ + hdac->DMA_Handle1->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh1; + + /* Set the DMA error callback for channel1 */ + hdac->DMA_Handle1->XferErrorCallback = DAC_DMAErrorCh1; + + /* Enable the selected DAC channel1 DMA request */ + SET_BIT(hdac->Instance->CR, DAC_CR_DMAEN1); + + /* Case of use of channel 1 */ + switch (Alignment) + { + case DAC_ALIGN_12B_R: + /* Get DHR12R1 address */ + tmpreg = (uint32_t)&hdac->Instance->DHR12R1; + break; + case DAC_ALIGN_12B_L: + /* Get DHR12L1 address */ + tmpreg = (uint32_t)&hdac->Instance->DHR12L1; + break; + case DAC_ALIGN_8B_R: + /* Get DHR8R1 address */ + tmpreg = (uint32_t)&hdac->Instance->DHR8R1; + break; + default: + break; + } + } +#if defined(DAC_CHANNEL2_SUPPORT) + else + { + /* Set the DMA transfer complete callback for channel2 */ + hdac->DMA_Handle2->XferCpltCallback = DAC_DMAConvCpltCh2; + + /* Set the DMA half transfer complete callback for channel2 */ + hdac->DMA_Handle2->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh2; + + /* Set the DMA error callback for channel2 */ + hdac->DMA_Handle2->XferErrorCallback = DAC_DMAErrorCh2; + + /* Enable the selected DAC channel2 DMA request */ + SET_BIT(hdac->Instance->CR, DAC_CR_DMAEN2); + + /* Case of use of channel 2 */ + switch (Alignment) + { + case DAC_ALIGN_12B_R: + /* Get DHR12R2 address */ + tmpreg = (uint32_t)&hdac->Instance->DHR12R2; + break; + case DAC_ALIGN_12B_L: + /* Get DHR12L2 address */ + tmpreg = (uint32_t)&hdac->Instance->DHR12L2; + break; + case DAC_ALIGN_8B_R: + /* Get DHR8R2 address */ + tmpreg = (uint32_t)&hdac->Instance->DHR8R2; + break; + default: + break; + } + } +#endif /* DAC_CHANNEL2_SUPPORT */ + + /* Enable the DMA Stream */ + if (Channel == DAC_CHANNEL_1) + { + /* Enable the DAC DMA underrun interrupt */ + __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR1); + + /* Enable the DMA Stream */ + status = HAL_DMA_Start_IT(hdac->DMA_Handle1, (uint32_t)pData, tmpreg, Length); + } +#if defined(DAC_CHANNEL2_SUPPORT) + else + { + /* Enable the DAC DMA underrun interrupt */ + __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR2); + + /* Enable the DMA Stream */ + status = HAL_DMA_Start_IT(hdac->DMA_Handle2, (uint32_t)pData, tmpreg, Length); + } +#endif /* DAC_CHANNEL2_SUPPORT */ + + /* Process Unlocked */ + __HAL_UNLOCK(hdac); + + if (status == HAL_OK) + { + /* Enable the Peripheral */ + __HAL_DAC_ENABLE(hdac, Channel); + } + else + { + hdac->ErrorCode |= HAL_DAC_ERROR_DMA; + } + + /* Return function status */ + return status; +} + +/** + * @brief Disables DAC and stop conversion of channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + + /* Disable the selected DAC channel DMA request */ + hdac->Instance->CR &= ~(DAC_CR_DMAEN1 << (Channel & 0x10UL)); + + /* Disable the Peripheral */ + __HAL_DAC_DISABLE(hdac, Channel); + + /* Disable the DMA Stream */ + + /* Channel1 is used */ + if (Channel == DAC_CHANNEL_1) + { + /* Disable the DMA Stream */ + (void)HAL_DMA_Abort(hdac->DMA_Handle1); + + /* Disable the DAC DMA underrun interrupt */ + __HAL_DAC_DISABLE_IT(hdac, DAC_IT_DMAUDR1); + } +#if defined(DAC_CHANNEL2_SUPPORT) + else /* Channel2 is used for */ + { + /* Disable the DMA Stream */ + (void)HAL_DMA_Abort(hdac->DMA_Handle2); + + /* Disable the DAC DMA underrun interrupt */ + __HAL_DAC_DISABLE_IT(hdac, DAC_IT_DMAUDR2); + } +#endif /* DAC_CHANNEL2_SUPPORT */ + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Handles DAC interrupt request + * This function uses the interruption of DMA + * underrun. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +void HAL_DAC_IRQHandler(DAC_HandleTypeDef *hdac) +{ + if (__HAL_DAC_GET_IT_SOURCE(hdac, DAC_IT_DMAUDR1)) + { + /* Check underrun flag of DAC channel 1 */ + if (__HAL_DAC_GET_FLAG(hdac, DAC_FLAG_DMAUDR1)) + { + /* Change DAC state to error state */ + hdac->State = HAL_DAC_STATE_ERROR; + + /* Set DAC error code to channel1 DMA underrun error */ + SET_BIT(hdac->ErrorCode, HAL_DAC_ERROR_DMAUNDERRUNCH1); + + /* Clear the underrun flag */ + __HAL_DAC_CLEAR_FLAG(hdac, DAC_FLAG_DMAUDR1); + + /* Disable the selected DAC channel1 DMA request */ + CLEAR_BIT(hdac->Instance->CR, DAC_CR_DMAEN1); + + /* Error callback */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->DMAUnderrunCallbackCh1(hdac); +#else + HAL_DAC_DMAUnderrunCallbackCh1(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + } + } + +#if defined(DAC_CHANNEL2_SUPPORT) + if (__HAL_DAC_GET_IT_SOURCE(hdac, DAC_IT_DMAUDR2)) + { + /* Check underrun flag of DAC channel 2 */ + if (__HAL_DAC_GET_FLAG(hdac, DAC_FLAG_DMAUDR2)) + { + /* Change DAC state to error state */ + hdac->State = HAL_DAC_STATE_ERROR; + + /* Set DAC error code to channel2 DMA underrun error */ + SET_BIT(hdac->ErrorCode, HAL_DAC_ERROR_DMAUNDERRUNCH2); + + /* Clear the underrun flag */ + __HAL_DAC_CLEAR_FLAG(hdac, DAC_FLAG_DMAUDR2); + + /* Disable the selected DAC channel2 DMA request */ + CLEAR_BIT(hdac->Instance->CR, DAC_CR_DMAEN2); + + /* Error callback */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->DMAUnderrunCallbackCh2(hdac); +#else + HAL_DACEx_DMAUnderrunCallbackCh2(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + } + } +#endif /* DAC_CHANNEL2_SUPPORT */ +} + +/** + * @brief Set the specified data holding register value for DAC channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @param Alignment Specifies the data alignment. + * This parameter can be one of the following values: + * @arg DAC_ALIGN_8B_R: 8bit right data alignment selected + * @arg DAC_ALIGN_12B_L: 12bit left data alignment selected + * @arg DAC_ALIGN_12B_R: 12bit right data alignment selected + * @param Data Data to be loaded in the selected data holding register. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data) +{ + __IO uint32_t tmp = 0UL; + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + assert_param(IS_DAC_ALIGN(Alignment)); + assert_param(IS_DAC_DATA(Data)); + + tmp = (uint32_t)hdac->Instance; + if (Channel == DAC_CHANNEL_1) + { + tmp += DAC_DHR12R1_ALIGNMENT(Alignment); + } +#if defined(DAC_CHANNEL2_SUPPORT) + else + { + tmp += DAC_DHR12R2_ALIGNMENT(Alignment); + } +#endif /* DAC_CHANNEL2_SUPPORT */ + + /* Set the DAC channel selected data holding register */ + *(__IO uint32_t *) tmp = Data; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Conversion complete callback in non-blocking mode for Channel1 + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DAC_ConvCpltCallbackCh1 could be implemented in the user file + */ +} + +/** + * @brief Conversion half DMA transfer callback in non-blocking mode for Channel1 + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DAC_ConvHalfCpltCallbackCh1 could be implemented in the user file + */ +} + +/** + * @brief Error DAC callback for Channel1. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DAC_ErrorCallbackCh1 could be implemented in the user file + */ +} + +/** + * @brief DMA underrun DAC callback for channel1. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DAC_DMAUnderrunCallbackCh1 could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup DAC_Exported_Functions_Group3 Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Configure channels. + (+) Set the specified data holding register value for DAC channel. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the last data output value of the selected DAC channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @retval The selected DAC channel data output value. + */ +uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef *hdac, uint32_t Channel) +{ + uint32_t result = 0; + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + + if (Channel == DAC_CHANNEL_1) + { + result = hdac->Instance->DOR1; + } +#if defined(DAC_CHANNEL2_SUPPORT) + else + { + result = hdac->Instance->DOR2; + } +#endif /* DAC_CHANNEL2_SUPPORT */ + /* Returns the DAC channel data output register value */ + return result; +} + +/** + * @brief Configures the selected DAC channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param sConfig DAC configuration structure. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef *hdac, DAC_ChannelConfTypeDef *sConfig, uint32_t Channel) +{ + uint32_t tmpreg1; + uint32_t tmpreg2; + + /* Check the DAC parameters */ + assert_param(IS_DAC_TRIGGER(sConfig->DAC_Trigger)); + assert_param(IS_DAC_OUTPUT_BUFFER_STATE(sConfig->DAC_OutputBuffer)); + assert_param(IS_DAC_CHANNEL(Channel)); + + /* Process locked */ + __HAL_LOCK(hdac); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + + /* Get the DAC CR value */ + tmpreg1 = hdac->Instance->CR; + /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */ + tmpreg1 &= ~(((uint32_t)(DAC_CR_MAMP1 | DAC_CR_WAVE1 | DAC_CR_TSEL1 | DAC_CR_TEN1 | DAC_CR_BOFF1)) << (Channel & 0x10UL)); + /* Configure for the selected DAC channel: buffer output, trigger */ + /* Set TSELx and TENx bits according to DAC_Trigger value */ + /* Set BOFFx bit according to DAC_OutputBuffer value */ + tmpreg2 = (sConfig->DAC_Trigger | sConfig->DAC_OutputBuffer); + /* Calculate CR register value depending on DAC_Channel */ + tmpreg1 |= tmpreg2 << (Channel & 0x10UL); + /* Write to DAC CR */ + hdac->Instance->CR = tmpreg1; + /* Disable wave generation */ + CLEAR_BIT(hdac->Instance->CR, (DAC_CR_WAVE1 << (Channel & 0x10UL))); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdac); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup DAC_Exported_Functions_Group4 Peripheral State and Errors functions + * @brief Peripheral State and Errors functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Errors functions ##### + ============================================================================== + [..] + This subsection provides functions allowing to + (+) Check the DAC state. + (+) Check the DAC Errors. + +@endverbatim + * @{ + */ + +/** + * @brief return the DAC handle state + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval HAL state + */ +HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef *hdac) +{ + /* Return DAC handle state */ + return hdac->State; +} + + +/** + * @brief Return the DAC error code + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval DAC Error Code + */ +uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac) +{ + return hdac->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DAC_Exported_Functions + * @{ + */ + +/** @addtogroup DAC_Exported_Functions_Group1 + * @{ + */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User DAC Callback + * To be used instead of the weak (surcharged) predefined callback + * @param hdac DAC handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_DAC_ERROR_INVALID_CALLBACK DAC Error Callback ID + * @arg @ref HAL_DAC_CH1_COMPLETE_CB_ID DAC CH1 Complete Callback ID + * @arg @ref HAL_DAC_CH1_HALF_COMPLETE_CB_ID DAC CH1 Half Complete Callback ID + * @arg @ref HAL_DAC_CH1_ERROR_ID DAC CH1 Error Callback ID + * @arg @ref HAL_DAC_CH1_UNDERRUN_CB_ID DAC CH1 UnderRun Callback ID + * @arg @ref HAL_DAC_CH2_COMPLETE_CB_ID DAC CH2 Complete Callback ID + * @arg @ref HAL_DAC_CH2_HALF_COMPLETE_CB_ID DAC CH2 Half Complete Callback ID + * @arg @ref HAL_DAC_CH2_ERROR_ID DAC CH2 Error Callback ID + * @arg @ref HAL_DAC_CH2_UNDERRUN_CB_ID DAC CH2 UnderRun Callback ID + * @arg @ref HAL_DAC_MSPINIT_CB_ID DAC MSP Init Callback ID + * @arg @ref HAL_DAC_MSPDEINIT_CB_ID DAC MSP DeInit Callback ID + * + * @param pCallback pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_DAC_RegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID, + pDAC_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hdac); + + if (hdac->State == HAL_DAC_STATE_READY) + { + switch (CallbackID) + { + case HAL_DAC_CH1_COMPLETE_CB_ID : + hdac->ConvCpltCallbackCh1 = pCallback; + break; + case HAL_DAC_CH1_HALF_COMPLETE_CB_ID : + hdac->ConvHalfCpltCallbackCh1 = pCallback; + break; + case HAL_DAC_CH1_ERROR_ID : + hdac->ErrorCallbackCh1 = pCallback; + break; + case HAL_DAC_CH1_UNDERRUN_CB_ID : + hdac->DMAUnderrunCallbackCh1 = pCallback; + break; +#if defined(DAC_CHANNEL2_SUPPORT) + case HAL_DAC_CH2_COMPLETE_CB_ID : + hdac->ConvCpltCallbackCh2 = pCallback; + break; + case HAL_DAC_CH2_HALF_COMPLETE_CB_ID : + hdac->ConvHalfCpltCallbackCh2 = pCallback; + break; + case HAL_DAC_CH2_ERROR_ID : + hdac->ErrorCallbackCh2 = pCallback; + break; + case HAL_DAC_CH2_UNDERRUN_CB_ID : + hdac->DMAUnderrunCallbackCh2 = pCallback; + break; +#endif /* DAC_CHANNEL2_SUPPORT */ + case HAL_DAC_MSPINIT_CB_ID : + hdac->MspInitCallback = pCallback; + break; + case HAL_DAC_MSPDEINIT_CB_ID : + hdac->MspDeInitCallback = pCallback; + break; + default : + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hdac->State == HAL_DAC_STATE_RESET) + { + switch (CallbackID) + { + case HAL_DAC_MSPINIT_CB_ID : + hdac->MspInitCallback = pCallback; + break; + case HAL_DAC_MSPDEINIT_CB_ID : + hdac->MspDeInitCallback = pCallback; + break; + default : + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdac); + return status; +} + +/** + * @brief Unregister a User DAC Callback + * DAC Callback is redirected to the weak (surcharged) predefined callback + * @param hdac DAC handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_DAC_CH1_COMPLETE_CB_ID DAC CH1 transfer Complete Callback ID + * @arg @ref HAL_DAC_CH1_HALF_COMPLETE_CB_ID DAC CH1 Half Complete Callback ID + * @arg @ref HAL_DAC_CH1_ERROR_ID DAC CH1 Error Callback ID + * @arg @ref HAL_DAC_CH1_UNDERRUN_CB_ID DAC CH1 UnderRun Callback ID + * @arg @ref HAL_DAC_CH2_COMPLETE_CB_ID DAC CH2 Complete Callback ID + * @arg @ref HAL_DAC_CH2_HALF_COMPLETE_CB_ID DAC CH2 Half Complete Callback ID + * @arg @ref HAL_DAC_CH2_ERROR_ID DAC CH2 Error Callback ID + * @arg @ref HAL_DAC_CH2_UNDERRUN_CB_ID DAC CH2 UnderRun Callback ID + * @arg @ref HAL_DAC_MSPINIT_CB_ID DAC MSP Init Callback ID + * @arg @ref HAL_DAC_MSPDEINIT_CB_ID DAC MSP DeInit Callback ID + * @arg @ref HAL_DAC_ALL_CB_ID DAC All callbacks + * @retval status + */ +HAL_StatusTypeDef HAL_DAC_UnRegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdac); + + if (hdac->State == HAL_DAC_STATE_READY) + { + switch (CallbackID) + { + case HAL_DAC_CH1_COMPLETE_CB_ID : + hdac->ConvCpltCallbackCh1 = HAL_DAC_ConvCpltCallbackCh1; + break; + case HAL_DAC_CH1_HALF_COMPLETE_CB_ID : + hdac->ConvHalfCpltCallbackCh1 = HAL_DAC_ConvHalfCpltCallbackCh1; + break; + case HAL_DAC_CH1_ERROR_ID : + hdac->ErrorCallbackCh1 = HAL_DAC_ErrorCallbackCh1; + break; + case HAL_DAC_CH1_UNDERRUN_CB_ID : + hdac->DMAUnderrunCallbackCh1 = HAL_DAC_DMAUnderrunCallbackCh1; + break; +#if defined(DAC_CHANNEL2_SUPPORT) + case HAL_DAC_CH2_COMPLETE_CB_ID : + hdac->ConvCpltCallbackCh2 = HAL_DACEx_ConvCpltCallbackCh2; + break; + case HAL_DAC_CH2_HALF_COMPLETE_CB_ID : + hdac->ConvHalfCpltCallbackCh2 = HAL_DACEx_ConvHalfCpltCallbackCh2; + break; + case HAL_DAC_CH2_ERROR_ID : + hdac->ErrorCallbackCh2 = HAL_DACEx_ErrorCallbackCh2; + break; + case HAL_DAC_CH2_UNDERRUN_CB_ID : + hdac->DMAUnderrunCallbackCh2 = HAL_DACEx_DMAUnderrunCallbackCh2; + break; +#endif /* DAC_CHANNEL2_SUPPORT */ + case HAL_DAC_MSPINIT_CB_ID : + hdac->MspInitCallback = HAL_DAC_MspInit; + break; + case HAL_DAC_MSPDEINIT_CB_ID : + hdac->MspDeInitCallback = HAL_DAC_MspDeInit; + break; + case HAL_DAC_ALL_CB_ID : + hdac->ConvCpltCallbackCh1 = HAL_DAC_ConvCpltCallbackCh1; + hdac->ConvHalfCpltCallbackCh1 = HAL_DAC_ConvHalfCpltCallbackCh1; + hdac->ErrorCallbackCh1 = HAL_DAC_ErrorCallbackCh1; + hdac->DMAUnderrunCallbackCh1 = HAL_DAC_DMAUnderrunCallbackCh1; +#if defined(DAC_CHANNEL2_SUPPORT) + hdac->ConvCpltCallbackCh2 = HAL_DACEx_ConvCpltCallbackCh2; + hdac->ConvHalfCpltCallbackCh2 = HAL_DACEx_ConvHalfCpltCallbackCh2; + hdac->ErrorCallbackCh2 = HAL_DACEx_ErrorCallbackCh2; + hdac->DMAUnderrunCallbackCh2 = HAL_DACEx_DMAUnderrunCallbackCh2; +#endif /* DAC_CHANNEL2_SUPPORT */ + hdac->MspInitCallback = HAL_DAC_MspInit; + hdac->MspDeInitCallback = HAL_DAC_MspDeInit; + break; + default : + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hdac->State == HAL_DAC_STATE_RESET) + { + switch (CallbackID) + { + case HAL_DAC_MSPINIT_CB_ID : + hdac->MspInitCallback = HAL_DAC_MspInit; + break; + case HAL_DAC_MSPDEINIT_CB_ID : + hdac->MspDeInitCallback = HAL_DAC_MspDeInit; + break; + default : + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdac); + return status; +} +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DAC_Private_Functions + * @{ + */ + +/** + * @brief DMA conversion complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma) +{ + DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->ConvCpltCallbackCh1(hdac); +#else + HAL_DAC_ConvCpltCallbackCh1(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + + hdac->State = HAL_DAC_STATE_READY; +} + +/** + * @brief DMA half transfer complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma) +{ + DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + /* Conversion complete callback */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->ConvHalfCpltCallbackCh1(hdac); +#else + HAL_DAC_ConvHalfCpltCallbackCh1(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA error callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma) +{ + DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Set DAC error code to DMA error */ + hdac->ErrorCode |= HAL_DAC_ERROR_DMA; + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->ErrorCallbackCh1(hdac); +#else + HAL_DAC_ErrorCallbackCh1(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + + hdac->State = HAL_DAC_STATE_READY; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DAC */ + +#endif /* HAL_DAC_MODULE_ENABLED */ + +/** + * @} + */ + diff --git a/Drivers/stm32f4xx_hal_dac.h b/libs/hal/stm32f4xx_hal_dac.h similarity index 97% rename from Drivers/stm32f4xx_hal_dac.h rename to libs/hal/stm32f4xx_hal_dac.h index 12592a2..a79ca73 100644 --- a/Drivers/stm32f4xx_hal_dac.h +++ b/libs/hal/stm32f4xx_hal_dac.h @@ -1,480 +1,480 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dac.h - * @author MCD Application Team - * @brief Header file of DAC HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_DAC_H -#define STM32F4xx_HAL_DAC_H - -#ifdef __cplusplus -extern "C" { -#endif - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -#if defined(DAC) - -/** @addtogroup DAC - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup DAC_Exported_Types DAC Exported Types - * @{ - */ - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_DAC_STATE_RESET = 0x00U, /*!< DAC not yet initialized or disabled */ - HAL_DAC_STATE_READY = 0x01U, /*!< DAC initialized and ready for use */ - HAL_DAC_STATE_BUSY = 0x02U, /*!< DAC internal processing is ongoing */ - HAL_DAC_STATE_TIMEOUT = 0x03U, /*!< DAC timeout state */ - HAL_DAC_STATE_ERROR = 0x04U /*!< DAC error state */ - -} HAL_DAC_StateTypeDef; - -/** - * @brief DAC handle Structure definition - */ -#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) -typedef struct __DAC_HandleTypeDef -#else -typedef struct -#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ -{ - DAC_TypeDef *Instance; /*!< Register base address */ - - __IO HAL_DAC_StateTypeDef State; /*!< DAC communication state */ - - HAL_LockTypeDef Lock; /*!< DAC locking object */ - - DMA_HandleTypeDef *DMA_Handle1; /*!< Pointer DMA handler for channel 1 */ - - DMA_HandleTypeDef *DMA_Handle2; /*!< Pointer DMA handler for channel 2 */ - - __IO uint32_t ErrorCode; /*!< DAC Error code */ - -#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) - void (* ConvCpltCallbackCh1) (struct __DAC_HandleTypeDef *hdac); - void (* ConvHalfCpltCallbackCh1) (struct __DAC_HandleTypeDef *hdac); - void (* ErrorCallbackCh1) (struct __DAC_HandleTypeDef *hdac); - void (* DMAUnderrunCallbackCh1) (struct __DAC_HandleTypeDef *hdac); -#if defined(DAC_CHANNEL2_SUPPORT) - void (* ConvCpltCallbackCh2) (struct __DAC_HandleTypeDef *hdac); - void (* ConvHalfCpltCallbackCh2) (struct __DAC_HandleTypeDef *hdac); - void (* ErrorCallbackCh2) (struct __DAC_HandleTypeDef *hdac); - void (* DMAUnderrunCallbackCh2) (struct __DAC_HandleTypeDef *hdac); -#endif /* DAC_CHANNEL2_SUPPORT */ - - void (* MspInitCallback) (struct __DAC_HandleTypeDef *hdac); - void (* MspDeInitCallback) (struct __DAC_HandleTypeDef *hdac); -#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ - -} DAC_HandleTypeDef; - -/** - * @brief DAC Configuration regular Channel structure definition - */ -typedef struct -{ - uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel. - This parameter can be a value of @ref DAC_trigger_selection */ - - uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled. - This parameter can be a value of @ref DAC_output_buffer */ - -} DAC_ChannelConfTypeDef; - -#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) -/** - * @brief HAL DAC Callback ID enumeration definition - */ -typedef enum -{ - HAL_DAC_CH1_COMPLETE_CB_ID = 0x00U, /*!< DAC CH1 Complete Callback ID */ - HAL_DAC_CH1_HALF_COMPLETE_CB_ID = 0x01U, /*!< DAC CH1 half Complete Callback ID */ - HAL_DAC_CH1_ERROR_ID = 0x02U, /*!< DAC CH1 error Callback ID */ - HAL_DAC_CH1_UNDERRUN_CB_ID = 0x03U, /*!< DAC CH1 underrun Callback ID */ -#if defined(DAC_CHANNEL2_SUPPORT) - HAL_DAC_CH2_COMPLETE_CB_ID = 0x04U, /*!< DAC CH2 Complete Callback ID */ - HAL_DAC_CH2_HALF_COMPLETE_CB_ID = 0x05U, /*!< DAC CH2 half Complete Callback ID */ - HAL_DAC_CH2_ERROR_ID = 0x06U, /*!< DAC CH2 error Callback ID */ - HAL_DAC_CH2_UNDERRUN_CB_ID = 0x07U, /*!< DAC CH2 underrun Callback ID */ -#endif /* DAC_CHANNEL2_SUPPORT */ - HAL_DAC_MSPINIT_CB_ID = 0x08U, /*!< DAC MspInit Callback ID */ - HAL_DAC_MSPDEINIT_CB_ID = 0x09U, /*!< DAC MspDeInit Callback ID */ - HAL_DAC_ALL_CB_ID = 0x0AU /*!< DAC All ID */ -} HAL_DAC_CallbackIDTypeDef; - -/** - * @brief HAL DAC Callback pointer definition - */ -typedef void (*pDAC_CallbackTypeDef)(DAC_HandleTypeDef *hdac); -#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup DAC_Exported_Constants DAC Exported Constants - * @{ - */ - -/** @defgroup DAC_Error_Code DAC Error Code - * @{ - */ -#define HAL_DAC_ERROR_NONE 0x00U /*!< No error */ -#define HAL_DAC_ERROR_DMAUNDERRUNCH1 0x01U /*!< DAC channel1 DMA underrun error */ -#if defined(DAC_CHANNEL2_SUPPORT) -#define HAL_DAC_ERROR_DMAUNDERRUNCH2 0x02U /*!< DAC channel2 DMA underrun error */ -#endif /* DAC_CHANNEL2_SUPPORT */ -#define HAL_DAC_ERROR_DMA 0x04U /*!< DMA error */ -#define HAL_DAC_ERROR_TIMEOUT 0x08U /*!< Timeout error */ -#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) -#define HAL_DAC_ERROR_INVALID_CALLBACK 0x10U /*!< Invalid callback error */ -#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup DAC_trigger_selection DAC trigger selection - * @{ - */ -#define DAC_TRIGGER_NONE 0x00000000UL /*!< Conversion is automatic once the DAC1_DHRxxxx register has been loaded, and not by external trigger */ -#define DAC_TRIGGER_T2_TRGO (DAC_CR_TSEL1_2 | DAC_CR_TEN1) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */ -#define DAC_TRIGGER_T4_TRGO (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */ -#define DAC_TRIGGER_T5_TRGO ( DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel */ -#define DAC_TRIGGER_T6_TRGO ( DAC_CR_TEN1) /*!< Conversion started by software trigger for DAC channel */ -#define DAC_TRIGGER_T7_TRGO ( DAC_CR_TSEL1_1 | DAC_CR_TEN1) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */ -#define DAC_TRIGGER_T8_TRGO ( DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel */ -#define DAC_TRIGGER_EXT_IT9 (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */ -#define DAC_TRIGGER_SOFTWARE (DAC_CR_TSEL1 | DAC_CR_TEN1) /*!< Conversion started by software trigger for DAC channel */ - -/** - * @} - */ - -/** @defgroup DAC_output_buffer DAC output buffer - * @{ - */ -#define DAC_OUTPUTBUFFER_ENABLE 0x00000000U -#define DAC_OUTPUTBUFFER_DISABLE (DAC_CR_BOFF1) - -/** - * @} - */ - -/** @defgroup DAC_Channel_selection DAC Channel selection - * @{ - */ -#define DAC_CHANNEL_1 0x00000000U -#if defined(DAC_CHANNEL2_SUPPORT) -#define DAC_CHANNEL_2 0x00000010U -#endif /* DAC_CHANNEL2_SUPPORT */ -/** - * @} - */ - -/** @defgroup DAC_data_alignment DAC data alignment - * @{ - */ -#define DAC_ALIGN_12B_R 0x00000000U -#define DAC_ALIGN_12B_L 0x00000004U -#define DAC_ALIGN_8B_R 0x00000008U - -/** - * @} - */ - -/** @defgroup DAC_flags_definition DAC flags definition - * @{ - */ -#define DAC_FLAG_DMAUDR1 (DAC_SR_DMAUDR1) -#if defined(DAC_CHANNEL2_SUPPORT) -#define DAC_FLAG_DMAUDR2 (DAC_SR_DMAUDR2) -#endif /* DAC_CHANNEL2_SUPPORT */ - -/** - * @} - */ - -/** @defgroup DAC_IT_definition DAC IT definition - * @{ - */ -#define DAC_IT_DMAUDR1 (DAC_SR_DMAUDR1) -#if defined(DAC_CHANNEL2_SUPPORT) -#define DAC_IT_DMAUDR2 (DAC_SR_DMAUDR2) -#endif /* DAC_CHANNEL2_SUPPORT */ - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ - -/** @defgroup DAC_Exported_Macros DAC Exported Macros - * @{ - */ - -/** @brief Reset DAC handle state. - * @param __HANDLE__ specifies the DAC handle. - * @retval None - */ -#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) -#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) do { \ - (__HANDLE__)->State = HAL_DAC_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DAC_STATE_RESET) -#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ - -/** @brief Enable the DAC channel. - * @param __HANDLE__ specifies the DAC handle. - * @param __DAC_Channel__ specifies the DAC channel - * @retval None - */ -#define __HAL_DAC_ENABLE(__HANDLE__, __DAC_Channel__) \ - ((__HANDLE__)->Instance->CR |= (DAC_CR_EN1 << ((__DAC_Channel__) & 0x10UL))) - -/** @brief Disable the DAC channel. - * @param __HANDLE__ specifies the DAC handle - * @param __DAC_Channel__ specifies the DAC channel. - * @retval None - */ -#define __HAL_DAC_DISABLE(__HANDLE__, __DAC_Channel__) \ - ((__HANDLE__)->Instance->CR &= ~(DAC_CR_EN1 << ((__DAC_Channel__) & 0x10UL))) - -/** @brief Set DHR12R1 alignment. - * @param __ALIGNMENT__ specifies the DAC alignment - * @retval None - */ -#define DAC_DHR12R1_ALIGNMENT(__ALIGNMENT__) (0x00000008UL + (__ALIGNMENT__)) - -#if defined(DAC_CHANNEL2_SUPPORT) -/** @brief Set DHR12R2 alignment. - * @param __ALIGNMENT__ specifies the DAC alignment - * @retval None - */ -#define DAC_DHR12R2_ALIGNMENT(__ALIGNMENT__) (0x00000014UL + (__ALIGNMENT__)) -#endif /* DAC_CHANNEL2_SUPPORT */ - -/** @brief Set DHR12RD alignment. - * @param __ALIGNMENT__ specifies the DAC alignment - * @retval None - */ -#define DAC_DHR12RD_ALIGNMENT(__ALIGNMENT__) (0x00000020UL + (__ALIGNMENT__)) - -/** @brief Enable the DAC interrupt. - * @param __HANDLE__ specifies the DAC handle - * @param __INTERRUPT__ specifies the DAC interrupt. - * This parameter can be any combination of the following values: - * @arg DAC_IT_DMAUDR1 DAC channel 1 DMA underrun interrupt - * @arg DAC_IT_DMAUDR2 DAC channel 2 DMA underrun interrupt - * @retval None - */ -#define __HAL_DAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__)) - -/** @brief Disable the DAC interrupt. - * @param __HANDLE__ specifies the DAC handle - * @param __INTERRUPT__ specifies the DAC interrupt. - * This parameter can be any combination of the following values: - * @arg DAC_IT_DMAUDR1 DAC channel 1 DMA underrun interrupt - * @arg DAC_IT_DMAUDR2 DAC channel 2 DMA underrun interrupt - * @retval None - */ -#define __HAL_DAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__)) - -/** @brief Check whether the specified DAC interrupt source is enabled or not. - * @param __HANDLE__ DAC handle - * @param __INTERRUPT__ DAC interrupt source to check - * This parameter can be any combination of the following values: - * @arg DAC_IT_DMAUDR1 DAC channel 1 DMA underrun interrupt - * @arg DAC_IT_DMAUDR2 DAC channel 2 DMA underrun interrupt - * @retval State of interruption (SET or RESET) - */ -#define __HAL_DAC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR\ - & (__INTERRUPT__)) == (__INTERRUPT__)) - -/** @brief Get the selected DAC's flag status. - * @param __HANDLE__ specifies the DAC handle. - * @param __FLAG__ specifies the DAC flag to get. - * This parameter can be any combination of the following values: - * @arg DAC_FLAG_DMAUDR1 DAC channel 1 DMA underrun flag - * @arg DAC_FLAG_DMAUDR2 DAC channel 2 DMA underrun flag - * @retval None - */ -#define __HAL_DAC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) - -/** @brief Clear the DAC's flag. - * @param __HANDLE__ specifies the DAC handle. - * @param __FLAG__ specifies the DAC flag to clear. - * This parameter can be any combination of the following values: - * @arg DAC_FLAG_DMAUDR1 DAC channel 1 DMA underrun flag - * @arg DAC_FLAG_DMAUDR2 DAC channel 2 DMA underrun flag - * @retval None - */ -#define __HAL_DAC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = (__FLAG__)) - -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ - -/** @defgroup DAC_Private_Macros DAC Private Macros - * @{ - */ -#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OUTPUTBUFFER_ENABLE) || \ - ((STATE) == DAC_OUTPUTBUFFER_DISABLE)) - -#if defined(DAC_CHANNEL2_SUPPORT) -#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1) || \ - ((CHANNEL) == DAC_CHANNEL_2)) -#else -#define IS_DAC_CHANNEL(CHANNEL) ((CHANNEL) == DAC_CHANNEL_1) -#endif /* DAC_CHANNEL2_SUPPORT */ - -#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_ALIGN_12B_R) || \ - ((ALIGN) == DAC_ALIGN_12B_L) || \ - ((ALIGN) == DAC_ALIGN_8B_R)) - -#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0UL) - -/** - * @} - */ - -/* Include DAC HAL Extended module */ -#include "stm32f4xx_hal_dac_ex.h" - -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup DAC_Exported_Functions - * @{ - */ - -/** @addtogroup DAC_Exported_Functions_Group1 - * @{ - */ -/* Initialization and de-initialization functions *****************************/ -HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef *hdac); -HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef *hdac); -void HAL_DAC_MspInit(DAC_HandleTypeDef *hdac); -void HAL_DAC_MspDeInit(DAC_HandleTypeDef *hdac); - -/** - * @} - */ - -/** @addtogroup DAC_Exported_Functions_Group2 - * @{ - */ -/* IO operation functions *****************************************************/ -HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef *hdac, uint32_t Channel); -HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef *hdac, uint32_t Channel); -HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t *pData, uint32_t Length, - uint32_t Alignment); -HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel); -void HAL_DAC_IRQHandler(DAC_HandleTypeDef *hdac); -HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data); - -void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef *hdac); -void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef *hdac); -void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac); -void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac); - -#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) -/* DAC callback registering/unregistering */ -HAL_StatusTypeDef HAL_DAC_RegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID, - pDAC_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_DAC_UnRegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID); -#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @addtogroup DAC_Exported_Functions_Group3 - * @{ - */ -/* Peripheral Control functions ***********************************************/ -uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef *hdac, uint32_t Channel); -HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef *hdac, DAC_ChannelConfTypeDef *sConfig, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup DAC_Exported_Functions_Group4 - * @{ - */ -/* Peripheral State and Error functions ***************************************/ -HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef *hdac); -uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac); - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup DAC_Private_Functions DAC Private Functions - * @{ - */ -void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma); -void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma); -void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma); -/** - * @} - */ - -/** - * @} - */ - -#endif /* DAC */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* STM32F4xx_HAL_DAC_H */ - +/** + ****************************************************************************** + * @file stm32f4xx_hal_dac.h + * @author MCD Application Team + * @brief Header file of DAC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F4xx_HAL_DAC_H +#define STM32F4xx_HAL_DAC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +#if defined(DAC) + +/** @addtogroup DAC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup DAC_Exported_Types DAC Exported Types + * @{ + */ + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_DAC_STATE_RESET = 0x00U, /*!< DAC not yet initialized or disabled */ + HAL_DAC_STATE_READY = 0x01U, /*!< DAC initialized and ready for use */ + HAL_DAC_STATE_BUSY = 0x02U, /*!< DAC internal processing is ongoing */ + HAL_DAC_STATE_TIMEOUT = 0x03U, /*!< DAC timeout state */ + HAL_DAC_STATE_ERROR = 0x04U /*!< DAC error state */ + +} HAL_DAC_StateTypeDef; + +/** + * @brief DAC handle Structure definition + */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) +typedef struct __DAC_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ +{ + DAC_TypeDef *Instance; /*!< Register base address */ + + __IO HAL_DAC_StateTypeDef State; /*!< DAC communication state */ + + HAL_LockTypeDef Lock; /*!< DAC locking object */ + + DMA_HandleTypeDef *DMA_Handle1; /*!< Pointer DMA handler for channel 1 */ + + DMA_HandleTypeDef *DMA_Handle2; /*!< Pointer DMA handler for channel 2 */ + + __IO uint32_t ErrorCode; /*!< DAC Error code */ + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + void (* ConvCpltCallbackCh1) (struct __DAC_HandleTypeDef *hdac); + void (* ConvHalfCpltCallbackCh1) (struct __DAC_HandleTypeDef *hdac); + void (* ErrorCallbackCh1) (struct __DAC_HandleTypeDef *hdac); + void (* DMAUnderrunCallbackCh1) (struct __DAC_HandleTypeDef *hdac); +#if defined(DAC_CHANNEL2_SUPPORT) + void (* ConvCpltCallbackCh2) (struct __DAC_HandleTypeDef *hdac); + void (* ConvHalfCpltCallbackCh2) (struct __DAC_HandleTypeDef *hdac); + void (* ErrorCallbackCh2) (struct __DAC_HandleTypeDef *hdac); + void (* DMAUnderrunCallbackCh2) (struct __DAC_HandleTypeDef *hdac); +#endif /* DAC_CHANNEL2_SUPPORT */ + + void (* MspInitCallback) (struct __DAC_HandleTypeDef *hdac); + void (* MspDeInitCallback) (struct __DAC_HandleTypeDef *hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + +} DAC_HandleTypeDef; + +/** + * @brief DAC Configuration regular Channel structure definition + */ +typedef struct +{ + uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel. + This parameter can be a value of @ref DAC_trigger_selection */ + + uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled. + This parameter can be a value of @ref DAC_output_buffer */ + +} DAC_ChannelConfTypeDef; + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) +/** + * @brief HAL DAC Callback ID enumeration definition + */ +typedef enum +{ + HAL_DAC_CH1_COMPLETE_CB_ID = 0x00U, /*!< DAC CH1 Complete Callback ID */ + HAL_DAC_CH1_HALF_COMPLETE_CB_ID = 0x01U, /*!< DAC CH1 half Complete Callback ID */ + HAL_DAC_CH1_ERROR_ID = 0x02U, /*!< DAC CH1 error Callback ID */ + HAL_DAC_CH1_UNDERRUN_CB_ID = 0x03U, /*!< DAC CH1 underrun Callback ID */ +#if defined(DAC_CHANNEL2_SUPPORT) + HAL_DAC_CH2_COMPLETE_CB_ID = 0x04U, /*!< DAC CH2 Complete Callback ID */ + HAL_DAC_CH2_HALF_COMPLETE_CB_ID = 0x05U, /*!< DAC CH2 half Complete Callback ID */ + HAL_DAC_CH2_ERROR_ID = 0x06U, /*!< DAC CH2 error Callback ID */ + HAL_DAC_CH2_UNDERRUN_CB_ID = 0x07U, /*!< DAC CH2 underrun Callback ID */ +#endif /* DAC_CHANNEL2_SUPPORT */ + HAL_DAC_MSPINIT_CB_ID = 0x08U, /*!< DAC MspInit Callback ID */ + HAL_DAC_MSPDEINIT_CB_ID = 0x09U, /*!< DAC MspDeInit Callback ID */ + HAL_DAC_ALL_CB_ID = 0x0AU /*!< DAC All ID */ +} HAL_DAC_CallbackIDTypeDef; + +/** + * @brief HAL DAC Callback pointer definition + */ +typedef void (*pDAC_CallbackTypeDef)(DAC_HandleTypeDef *hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DAC_Exported_Constants DAC Exported Constants + * @{ + */ + +/** @defgroup DAC_Error_Code DAC Error Code + * @{ + */ +#define HAL_DAC_ERROR_NONE 0x00U /*!< No error */ +#define HAL_DAC_ERROR_DMAUNDERRUNCH1 0x01U /*!< DAC channel1 DMA underrun error */ +#if defined(DAC_CHANNEL2_SUPPORT) +#define HAL_DAC_ERROR_DMAUNDERRUNCH2 0x02U /*!< DAC channel2 DMA underrun error */ +#endif /* DAC_CHANNEL2_SUPPORT */ +#define HAL_DAC_ERROR_DMA 0x04U /*!< DMA error */ +#define HAL_DAC_ERROR_TIMEOUT 0x08U /*!< Timeout error */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) +#define HAL_DAC_ERROR_INVALID_CALLBACK 0x10U /*!< Invalid callback error */ +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup DAC_trigger_selection DAC trigger selection + * @{ + */ +#define DAC_TRIGGER_NONE 0x00000000UL /*!< Conversion is automatic once the DAC1_DHRxxxx register has been loaded, and not by external trigger */ +#define DAC_TRIGGER_T2_TRGO (DAC_CR_TSEL1_2 | DAC_CR_TEN1) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_T4_TRGO (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_T5_TRGO ( DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_T6_TRGO ( DAC_CR_TEN1) /*!< Conversion started by software trigger for DAC channel */ +#define DAC_TRIGGER_T7_TRGO ( DAC_CR_TSEL1_1 | DAC_CR_TEN1) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_T8_TRGO ( DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_EXT_IT9 (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_SOFTWARE (DAC_CR_TSEL1 | DAC_CR_TEN1) /*!< Conversion started by software trigger for DAC channel */ + +/** + * @} + */ + +/** @defgroup DAC_output_buffer DAC output buffer + * @{ + */ +#define DAC_OUTPUTBUFFER_ENABLE 0x00000000U +#define DAC_OUTPUTBUFFER_DISABLE (DAC_CR_BOFF1) + +/** + * @} + */ + +/** @defgroup DAC_Channel_selection DAC Channel selection + * @{ + */ +#define DAC_CHANNEL_1 0x00000000U +#if defined(DAC_CHANNEL2_SUPPORT) +#define DAC_CHANNEL_2 0x00000010U +#endif /* DAC_CHANNEL2_SUPPORT */ +/** + * @} + */ + +/** @defgroup DAC_data_alignment DAC data alignment + * @{ + */ +#define DAC_ALIGN_12B_R 0x00000000U +#define DAC_ALIGN_12B_L 0x00000004U +#define DAC_ALIGN_8B_R 0x00000008U + +/** + * @} + */ + +/** @defgroup DAC_flags_definition DAC flags definition + * @{ + */ +#define DAC_FLAG_DMAUDR1 (DAC_SR_DMAUDR1) +#if defined(DAC_CHANNEL2_SUPPORT) +#define DAC_FLAG_DMAUDR2 (DAC_SR_DMAUDR2) +#endif /* DAC_CHANNEL2_SUPPORT */ + +/** + * @} + */ + +/** @defgroup DAC_IT_definition DAC IT definition + * @{ + */ +#define DAC_IT_DMAUDR1 (DAC_SR_DMAUDR1) +#if defined(DAC_CHANNEL2_SUPPORT) +#define DAC_IT_DMAUDR2 (DAC_SR_DMAUDR2) +#endif /* DAC_CHANNEL2_SUPPORT */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup DAC_Exported_Macros DAC Exported Macros + * @{ + */ + +/** @brief Reset DAC handle state. + * @param __HANDLE__ specifies the DAC handle. + * @retval None + */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) +#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_DAC_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DAC_STATE_RESET) +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + +/** @brief Enable the DAC channel. + * @param __HANDLE__ specifies the DAC handle. + * @param __DAC_Channel__ specifies the DAC channel + * @retval None + */ +#define __HAL_DAC_ENABLE(__HANDLE__, __DAC_Channel__) \ + ((__HANDLE__)->Instance->CR |= (DAC_CR_EN1 << ((__DAC_Channel__) & 0x10UL))) + +/** @brief Disable the DAC channel. + * @param __HANDLE__ specifies the DAC handle + * @param __DAC_Channel__ specifies the DAC channel. + * @retval None + */ +#define __HAL_DAC_DISABLE(__HANDLE__, __DAC_Channel__) \ + ((__HANDLE__)->Instance->CR &= ~(DAC_CR_EN1 << ((__DAC_Channel__) & 0x10UL))) + +/** @brief Set DHR12R1 alignment. + * @param __ALIGNMENT__ specifies the DAC alignment + * @retval None + */ +#define DAC_DHR12R1_ALIGNMENT(__ALIGNMENT__) (0x00000008UL + (__ALIGNMENT__)) + +#if defined(DAC_CHANNEL2_SUPPORT) +/** @brief Set DHR12R2 alignment. + * @param __ALIGNMENT__ specifies the DAC alignment + * @retval None + */ +#define DAC_DHR12R2_ALIGNMENT(__ALIGNMENT__) (0x00000014UL + (__ALIGNMENT__)) +#endif /* DAC_CHANNEL2_SUPPORT */ + +/** @brief Set DHR12RD alignment. + * @param __ALIGNMENT__ specifies the DAC alignment + * @retval None + */ +#define DAC_DHR12RD_ALIGNMENT(__ALIGNMENT__) (0x00000020UL + (__ALIGNMENT__)) + +/** @brief Enable the DAC interrupt. + * @param __HANDLE__ specifies the DAC handle + * @param __INTERRUPT__ specifies the DAC interrupt. + * This parameter can be any combination of the following values: + * @arg DAC_IT_DMAUDR1 DAC channel 1 DMA underrun interrupt + * @arg DAC_IT_DMAUDR2 DAC channel 2 DMA underrun interrupt + * @retval None + */ +#define __HAL_DAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__)) + +/** @brief Disable the DAC interrupt. + * @param __HANDLE__ specifies the DAC handle + * @param __INTERRUPT__ specifies the DAC interrupt. + * This parameter can be any combination of the following values: + * @arg DAC_IT_DMAUDR1 DAC channel 1 DMA underrun interrupt + * @arg DAC_IT_DMAUDR2 DAC channel 2 DMA underrun interrupt + * @retval None + */ +#define __HAL_DAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__)) + +/** @brief Check whether the specified DAC interrupt source is enabled or not. + * @param __HANDLE__ DAC handle + * @param __INTERRUPT__ DAC interrupt source to check + * This parameter can be any combination of the following values: + * @arg DAC_IT_DMAUDR1 DAC channel 1 DMA underrun interrupt + * @arg DAC_IT_DMAUDR2 DAC channel 2 DMA underrun interrupt + * @retval State of interruption (SET or RESET) + */ +#define __HAL_DAC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR\ + & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** @brief Get the selected DAC's flag status. + * @param __HANDLE__ specifies the DAC handle. + * @param __FLAG__ specifies the DAC flag to get. + * This parameter can be any combination of the following values: + * @arg DAC_FLAG_DMAUDR1 DAC channel 1 DMA underrun flag + * @arg DAC_FLAG_DMAUDR2 DAC channel 2 DMA underrun flag + * @retval None + */ +#define __HAL_DAC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the DAC's flag. + * @param __HANDLE__ specifies the DAC handle. + * @param __FLAG__ specifies the DAC flag to clear. + * This parameter can be any combination of the following values: + * @arg DAC_FLAG_DMAUDR1 DAC channel 1 DMA underrun flag + * @arg DAC_FLAG_DMAUDR2 DAC channel 2 DMA underrun flag + * @retval None + */ +#define __HAL_DAC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = (__FLAG__)) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ + +/** @defgroup DAC_Private_Macros DAC Private Macros + * @{ + */ +#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OUTPUTBUFFER_ENABLE) || \ + ((STATE) == DAC_OUTPUTBUFFER_DISABLE)) + +#if defined(DAC_CHANNEL2_SUPPORT) +#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1) || \ + ((CHANNEL) == DAC_CHANNEL_2)) +#else +#define IS_DAC_CHANNEL(CHANNEL) ((CHANNEL) == DAC_CHANNEL_1) +#endif /* DAC_CHANNEL2_SUPPORT */ + +#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_ALIGN_12B_R) || \ + ((ALIGN) == DAC_ALIGN_12B_L) || \ + ((ALIGN) == DAC_ALIGN_8B_R)) + +#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0UL) + +/** + * @} + */ + +/* Include DAC HAL Extended module */ +#include "stm32f4xx_hal_dac_ex.h" + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup DAC_Exported_Functions + * @{ + */ + +/** @addtogroup DAC_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef *hdac); +HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef *hdac); +void HAL_DAC_MspInit(DAC_HandleTypeDef *hdac); +void HAL_DAC_MspDeInit(DAC_HandleTypeDef *hdac); + +/** + * @} + */ + +/** @addtogroup DAC_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef *hdac, uint32_t Channel); +HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef *hdac, uint32_t Channel); +HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t *pData, uint32_t Length, + uint32_t Alignment); +HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel); +void HAL_DAC_IRQHandler(DAC_HandleTypeDef *hdac); +HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data); + +void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef *hdac); +void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef *hdac); +void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac); +void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac); + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) +/* DAC callback registering/unregistering */ +HAL_StatusTypeDef HAL_DAC_RegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID, + pDAC_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_DAC_UnRegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup DAC_Exported_Functions_Group3 + * @{ + */ +/* Peripheral Control functions ***********************************************/ +uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef *hdac, uint32_t Channel); +HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef *hdac, DAC_ChannelConfTypeDef *sConfig, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup DAC_Exported_Functions_Group4 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef *hdac); +uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac); + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup DAC_Private_Functions DAC Private Functions + * @{ + */ +void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma); +void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma); +void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** + * @} + */ + +#endif /* DAC */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32F4xx_HAL_DAC_H */ + diff --git a/Drivers/stm32f4xx_hal_dac_ex.c b/libs/hal/stm32f4xx_hal_dac_ex.c similarity index 97% rename from Drivers/stm32f4xx_hal_dac_ex.c rename to libs/hal/stm32f4xx_hal_dac_ex.c index 2579bc4..343dd98 100644 --- a/Drivers/stm32f4xx_hal_dac_ex.c +++ b/libs/hal/stm32f4xx_hal_dac_ex.c @@ -1,495 +1,495 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dac_ex.c - * @author MCD Application Team - * @brief Extended DAC HAL module driver. - * This file provides firmware functions to manage the extended - * functionalities of the DAC peripheral. - * - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - - *** Dual mode IO operation *** - ============================== - [..] - (+) When Dual mode is enabled (i.e. DAC Channel1 and Channel2 are used simultaneously) : - Use HAL_DACEx_DualGetValue() to get digital data to be converted and use - HAL_DACEx_DualSetValue() to set digital value to converted simultaneously in - Channel 1 and Channel 2. - - *** Signal generation operation *** - =================================== - [..] - (+) Use HAL_DACEx_TriangleWaveGenerate() to generate Triangle signal. - (+) Use HAL_DACEx_NoiseWaveGenerate() to generate Noise signal. - - @endverbatim - ****************************************************************************** - */ - - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -#ifdef HAL_DAC_MODULE_ENABLED - -#if defined(DAC) - -/** @defgroup DACEx DACEx - * @brief DAC Extended HAL module driver - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup DACEx_Exported_Functions DACEx Exported Functions - * @{ - */ - -/** @defgroup DACEx_Exported_Functions_Group2 IO operation functions - * @brief Extended IO operation functions - * -@verbatim - ============================================================================== - ##### Extended features functions ##### - ============================================================================== - [..] This section provides functions allowing to: - (+) Start conversion. - (+) Stop conversion. - (+) Start conversion and enable DMA transfer. - (+) Stop conversion and disable DMA transfer. - (+) Get result of conversion. - (+) Get result of dual mode conversion. - -@endverbatim - * @{ - */ - -#if defined(DAC_CHANNEL2_SUPPORT) -/** - * @brief Enables DAC and starts conversion of both channels. - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DACEx_DualStart(DAC_HandleTypeDef *hdac) -{ - uint32_t tmp_swtrig = 0UL; - - - /* Process locked */ - __HAL_LOCK(hdac); - - /* Change DAC state */ - hdac->State = HAL_DAC_STATE_BUSY; - - /* Enable the Peripheral */ - __HAL_DAC_ENABLE(hdac, DAC_CHANNEL_1); - __HAL_DAC_ENABLE(hdac, DAC_CHANNEL_2); - - /* Check if software trigger enabled */ - if ((hdac->Instance->CR & (DAC_CR_TEN1 | DAC_CR_TSEL1)) == DAC_TRIGGER_SOFTWARE) - { - tmp_swtrig |= DAC_SWTRIGR_SWTRIG1; - } - if ((hdac->Instance->CR & (DAC_CR_TEN2 | DAC_CR_TSEL2)) == (DAC_TRIGGER_SOFTWARE << (DAC_CHANNEL_2 & 0x10UL))) - { - tmp_swtrig |= DAC_SWTRIGR_SWTRIG2; - } - /* Enable the selected DAC software conversion*/ - SET_BIT(hdac->Instance->SWTRIGR, tmp_swtrig); - - /* Change DAC state */ - hdac->State = HAL_DAC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hdac); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Disables DAC and stop conversion of both channels. - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DACEx_DualStop(DAC_HandleTypeDef *hdac) -{ - - /* Disable the Peripheral */ - __HAL_DAC_DISABLE(hdac, DAC_CHANNEL_1); - __HAL_DAC_DISABLE(hdac, DAC_CHANNEL_2); - - /* Change DAC state */ - hdac->State = HAL_DAC_STATE_READY; - - /* Return function status */ - return HAL_OK; -} -#endif /* DAC_CHANNEL2_SUPPORT */ - -/** - * @brief Enable or disable the selected DAC channel wave generation. - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @param Channel The selected DAC channel. - * This parameter can be one of the following values: - * @arg DAC_CHANNEL_1: DAC Channel1 selected - * @arg DAC_CHANNEL_2: DAC Channel2 selected - * @param Amplitude Select max triangle amplitude. - * This parameter can be one of the following values: - * @arg DAC_TRIANGLEAMPLITUDE_1: Select max triangle amplitude of 1 - * @arg DAC_TRIANGLEAMPLITUDE_3: Select max triangle amplitude of 3 - * @arg DAC_TRIANGLEAMPLITUDE_7: Select max triangle amplitude of 7 - * @arg DAC_TRIANGLEAMPLITUDE_15: Select max triangle amplitude of 15 - * @arg DAC_TRIANGLEAMPLITUDE_31: Select max triangle amplitude of 31 - * @arg DAC_TRIANGLEAMPLITUDE_63: Select max triangle amplitude of 63 - * @arg DAC_TRIANGLEAMPLITUDE_127: Select max triangle amplitude of 127 - * @arg DAC_TRIANGLEAMPLITUDE_255: Select max triangle amplitude of 255 - * @arg DAC_TRIANGLEAMPLITUDE_511: Select max triangle amplitude of 511 - * @arg DAC_TRIANGLEAMPLITUDE_1023: Select max triangle amplitude of 1023 - * @arg DAC_TRIANGLEAMPLITUDE_2047: Select max triangle amplitude of 2047 - * @arg DAC_TRIANGLEAMPLITUDE_4095: Select max triangle amplitude of 4095 - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude) -{ - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(Channel)); - assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude)); - - /* Process locked */ - __HAL_LOCK(hdac); - - /* Change DAC state */ - hdac->State = HAL_DAC_STATE_BUSY; - - /* Enable the triangle wave generation for the selected DAC channel */ - MODIFY_REG(hdac->Instance->CR, ((DAC_CR_WAVE1) | (DAC_CR_MAMP1)) << (Channel & 0x10UL), - (DAC_CR_WAVE1_1 | Amplitude) << (Channel & 0x10UL)); - - /* Change DAC state */ - hdac->State = HAL_DAC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hdac); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Enable or disable the selected DAC channel wave generation. - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @param Channel The selected DAC channel. - * This parameter can be one of the following values: - * @arg DAC_CHANNEL_1: DAC Channel1 selected - * @arg DAC_CHANNEL_2: DAC Channel2 selected - * @param Amplitude Unmask DAC channel LFSR for noise wave generation. - * This parameter can be one of the following values: - * @arg DAC_LFSRUNMASK_BIT0: Unmask DAC channel LFSR bit0 for noise wave generation - * @arg DAC_LFSRUNMASK_BITS1_0: Unmask DAC channel LFSR bit[1:0] for noise wave generation - * @arg DAC_LFSRUNMASK_BITS2_0: Unmask DAC channel LFSR bit[2:0] for noise wave generation - * @arg DAC_LFSRUNMASK_BITS3_0: Unmask DAC channel LFSR bit[3:0] for noise wave generation - * @arg DAC_LFSRUNMASK_BITS4_0: Unmask DAC channel LFSR bit[4:0] for noise wave generation - * @arg DAC_LFSRUNMASK_BITS5_0: Unmask DAC channel LFSR bit[5:0] for noise wave generation - * @arg DAC_LFSRUNMASK_BITS6_0: Unmask DAC channel LFSR bit[6:0] for noise wave generation - * @arg DAC_LFSRUNMASK_BITS7_0: Unmask DAC channel LFSR bit[7:0] for noise wave generation - * @arg DAC_LFSRUNMASK_BITS8_0: Unmask DAC channel LFSR bit[8:0] for noise wave generation - * @arg DAC_LFSRUNMASK_BITS9_0: Unmask DAC channel LFSR bit[9:0] for noise wave generation - * @arg DAC_LFSRUNMASK_BITS10_0: Unmask DAC channel LFSR bit[10:0] for noise wave generation - * @arg DAC_LFSRUNMASK_BITS11_0: Unmask DAC channel LFSR bit[11:0] for noise wave generation - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude) -{ - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(Channel)); - assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude)); - - /* Process locked */ - __HAL_LOCK(hdac); - - /* Change DAC state */ - hdac->State = HAL_DAC_STATE_BUSY; - - /* Enable the noise wave generation for the selected DAC channel */ - MODIFY_REG(hdac->Instance->CR, ((DAC_CR_WAVE1) | (DAC_CR_MAMP1)) << (Channel & 0x10UL), - (DAC_CR_WAVE1_0 | Amplitude) << (Channel & 0x10UL)); - - /* Change DAC state */ - hdac->State = HAL_DAC_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hdac); - - /* Return function status */ - return HAL_OK; -} - -#if defined(DAC_CHANNEL2_SUPPORT) -/** - * @brief Set the specified data holding register value for dual DAC channel. - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @param Alignment Specifies the data alignment for dual channel DAC. - * This parameter can be one of the following values: - * DAC_ALIGN_8B_R: 8bit right data alignment selected - * DAC_ALIGN_12B_L: 12bit left data alignment selected - * DAC_ALIGN_12B_R: 12bit right data alignment selected - * @param Data1 Data for DAC Channel1 to be loaded in the selected data holding register. - * @param Data2 Data for DAC Channel2 to be loaded in the selected data holding register. - * @note In dual mode, a unique register access is required to write in both - * DAC channels at the same time. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef *hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2) -{ - uint32_t data; - uint32_t tmp; - - /* Check the parameters */ - assert_param(IS_DAC_ALIGN(Alignment)); - assert_param(IS_DAC_DATA(Data1)); - assert_param(IS_DAC_DATA(Data2)); - - /* Calculate and set dual DAC data holding register value */ - if (Alignment == DAC_ALIGN_8B_R) - { - data = ((uint32_t)Data2 << 8U) | Data1; - } - else - { - data = ((uint32_t)Data2 << 16U) | Data1; - } - - tmp = (uint32_t)hdac->Instance; - tmp += DAC_DHR12RD_ALIGNMENT(Alignment); - - /* Set the dual DAC selected data holding register */ - *(__IO uint32_t *)tmp = data; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Conversion complete callback in non-blocking mode for Channel2. - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @retval None - */ -__weak void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef *hdac) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdac); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_DACEx_ConvCpltCallbackCh2 could be implemented in the user file - */ -} - -/** - * @brief Conversion half DMA transfer callback in non-blocking mode for Channel2. - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @retval None - */ -__weak void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef *hdac) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdac); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_DACEx_ConvHalfCpltCallbackCh2 could be implemented in the user file - */ -} - -/** - * @brief Error DAC callback for Channel2. - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @retval None - */ -__weak void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef *hdac) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdac); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_DACEx_ErrorCallbackCh2 could be implemented in the user file - */ -} - -/** - * @brief DMA underrun DAC callback for Channel2. - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @retval None - */ -__weak void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hdac); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_DACEx_DMAUnderrunCallbackCh2 could be implemented in the user file - */ -} -#endif /* DAC_CHANNEL2_SUPPORT */ - - -/** - * @} - */ - -/** @defgroup DACEx_Exported_Functions_Group3 Peripheral Control functions - * @brief Extended Peripheral Control functions - * -@verbatim - ============================================================================== - ##### Peripheral Control functions ##### - ============================================================================== - [..] This section provides functions allowing to: - (+) Set the specified data holding register value for DAC channel. - -@endverbatim - * @{ - */ - -#if defined(DAC_CHANNEL2_SUPPORT) -/** - * @brief Return the last data output value of the selected DAC channel. - * @param hdac pointer to a DAC_HandleTypeDef structure that contains - * the configuration information for the specified DAC. - * @retval The selected DAC channel data output value. - */ -uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef *hdac) -{ - uint32_t tmp = 0UL; - - tmp |= hdac->Instance->DOR1; - - tmp |= hdac->Instance->DOR2 << 16UL; - - /* Returns the DAC channel data output register value */ - return tmp; -} -#endif /* DAC_CHANNEL2_SUPPORT */ - -/** - * @} - */ -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup DACEx_Private_Functions DACEx private functions - * @brief Extended private functions - * @{ - */ - -#if defined(DAC_CHANNEL2_SUPPORT) -/** - * @brief DMA conversion complete callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma) -{ - DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - -#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) - hdac->ConvCpltCallbackCh2(hdac); -#else - HAL_DACEx_ConvCpltCallbackCh2(hdac); -#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ - - hdac->State = HAL_DAC_STATE_READY; -} - -/** - * @brief DMA half transfer complete callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma) -{ - DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - /* Conversion complete callback */ -#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) - hdac->ConvHalfCpltCallbackCh2(hdac); -#else - HAL_DACEx_ConvHalfCpltCallbackCh2(hdac); -#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ -} - -/** - * @brief DMA error callback. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma) -{ - DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - /* Set DAC error code to DMA error */ - hdac->ErrorCode |= HAL_DAC_ERROR_DMA; - -#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) - hdac->ErrorCallbackCh2(hdac); -#else - HAL_DACEx_ErrorCallbackCh2(hdac); -#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ - - hdac->State = HAL_DAC_STATE_READY; -} -#endif /* DAC_CHANNEL2_SUPPORT */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* DAC */ - -#endif /* HAL_DAC_MODULE_ENABLED */ - -/** - * @} - */ - +/** + ****************************************************************************** + * @file stm32f4xx_hal_dac_ex.c + * @author MCD Application Team + * @brief Extended DAC HAL module driver. + * This file provides firmware functions to manage the extended + * functionalities of the DAC peripheral. + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + + *** Dual mode IO operation *** + ============================== + [..] + (+) When Dual mode is enabled (i.e. DAC Channel1 and Channel2 are used simultaneously) : + Use HAL_DACEx_DualGetValue() to get digital data to be converted and use + HAL_DACEx_DualSetValue() to set digital value to converted simultaneously in + Channel 1 and Channel 2. + + *** Signal generation operation *** + =================================== + [..] + (+) Use HAL_DACEx_TriangleWaveGenerate() to generate Triangle signal. + (+) Use HAL_DACEx_NoiseWaveGenerate() to generate Noise signal. + + @endverbatim + ****************************************************************************** + */ + + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +#ifdef HAL_DAC_MODULE_ENABLED + +#if defined(DAC) + +/** @defgroup DACEx DACEx + * @brief DAC Extended HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup DACEx_Exported_Functions DACEx Exported Functions + * @{ + */ + +/** @defgroup DACEx_Exported_Functions_Group2 IO operation functions + * @brief Extended IO operation functions + * +@verbatim + ============================================================================== + ##### Extended features functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Start conversion. + (+) Stop conversion. + (+) Start conversion and enable DMA transfer. + (+) Stop conversion and disable DMA transfer. + (+) Get result of conversion. + (+) Get result of dual mode conversion. + +@endverbatim + * @{ + */ + +#if defined(DAC_CHANNEL2_SUPPORT) +/** + * @brief Enables DAC and starts conversion of both channels. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DACEx_DualStart(DAC_HandleTypeDef *hdac) +{ + uint32_t tmp_swtrig = 0UL; + + + /* Process locked */ + __HAL_LOCK(hdac); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + + /* Enable the Peripheral */ + __HAL_DAC_ENABLE(hdac, DAC_CHANNEL_1); + __HAL_DAC_ENABLE(hdac, DAC_CHANNEL_2); + + /* Check if software trigger enabled */ + if ((hdac->Instance->CR & (DAC_CR_TEN1 | DAC_CR_TSEL1)) == DAC_TRIGGER_SOFTWARE) + { + tmp_swtrig |= DAC_SWTRIGR_SWTRIG1; + } + if ((hdac->Instance->CR & (DAC_CR_TEN2 | DAC_CR_TSEL2)) == (DAC_TRIGGER_SOFTWARE << (DAC_CHANNEL_2 & 0x10UL))) + { + tmp_swtrig |= DAC_SWTRIGR_SWTRIG2; + } + /* Enable the selected DAC software conversion*/ + SET_BIT(hdac->Instance->SWTRIGR, tmp_swtrig); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdac); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Disables DAC and stop conversion of both channels. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DACEx_DualStop(DAC_HandleTypeDef *hdac) +{ + + /* Disable the Peripheral */ + __HAL_DAC_DISABLE(hdac, DAC_CHANNEL_1); + __HAL_DAC_DISABLE(hdac, DAC_CHANNEL_2); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} +#endif /* DAC_CHANNEL2_SUPPORT */ + +/** + * @brief Enable or disable the selected DAC channel wave generation. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @param Amplitude Select max triangle amplitude. + * This parameter can be one of the following values: + * @arg DAC_TRIANGLEAMPLITUDE_1: Select max triangle amplitude of 1 + * @arg DAC_TRIANGLEAMPLITUDE_3: Select max triangle amplitude of 3 + * @arg DAC_TRIANGLEAMPLITUDE_7: Select max triangle amplitude of 7 + * @arg DAC_TRIANGLEAMPLITUDE_15: Select max triangle amplitude of 15 + * @arg DAC_TRIANGLEAMPLITUDE_31: Select max triangle amplitude of 31 + * @arg DAC_TRIANGLEAMPLITUDE_63: Select max triangle amplitude of 63 + * @arg DAC_TRIANGLEAMPLITUDE_127: Select max triangle amplitude of 127 + * @arg DAC_TRIANGLEAMPLITUDE_255: Select max triangle amplitude of 255 + * @arg DAC_TRIANGLEAMPLITUDE_511: Select max triangle amplitude of 511 + * @arg DAC_TRIANGLEAMPLITUDE_1023: Select max triangle amplitude of 1023 + * @arg DAC_TRIANGLEAMPLITUDE_2047: Select max triangle amplitude of 2047 + * @arg DAC_TRIANGLEAMPLITUDE_4095: Select max triangle amplitude of 4095 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude)); + + /* Process locked */ + __HAL_LOCK(hdac); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + + /* Enable the triangle wave generation for the selected DAC channel */ + MODIFY_REG(hdac->Instance->CR, ((DAC_CR_WAVE1) | (DAC_CR_MAMP1)) << (Channel & 0x10UL), + (DAC_CR_WAVE1_1 | Amplitude) << (Channel & 0x10UL)); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdac); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Enable or disable the selected DAC channel wave generation. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @arg DAC_CHANNEL_2: DAC Channel2 selected + * @param Amplitude Unmask DAC channel LFSR for noise wave generation. + * This parameter can be one of the following values: + * @arg DAC_LFSRUNMASK_BIT0: Unmask DAC channel LFSR bit0 for noise wave generation + * @arg DAC_LFSRUNMASK_BITS1_0: Unmask DAC channel LFSR bit[1:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS2_0: Unmask DAC channel LFSR bit[2:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS3_0: Unmask DAC channel LFSR bit[3:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS4_0: Unmask DAC channel LFSR bit[4:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS5_0: Unmask DAC channel LFSR bit[5:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS6_0: Unmask DAC channel LFSR bit[6:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS7_0: Unmask DAC channel LFSR bit[7:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS8_0: Unmask DAC channel LFSR bit[8:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS9_0: Unmask DAC channel LFSR bit[9:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS10_0: Unmask DAC channel LFSR bit[10:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS11_0: Unmask DAC channel LFSR bit[11:0] for noise wave generation + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude)); + + /* Process locked */ + __HAL_LOCK(hdac); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + + /* Enable the noise wave generation for the selected DAC channel */ + MODIFY_REG(hdac->Instance->CR, ((DAC_CR_WAVE1) | (DAC_CR_MAMP1)) << (Channel & 0x10UL), + (DAC_CR_WAVE1_0 | Amplitude) << (Channel & 0x10UL)); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdac); + + /* Return function status */ + return HAL_OK; +} + +#if defined(DAC_CHANNEL2_SUPPORT) +/** + * @brief Set the specified data holding register value for dual DAC channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Alignment Specifies the data alignment for dual channel DAC. + * This parameter can be one of the following values: + * DAC_ALIGN_8B_R: 8bit right data alignment selected + * DAC_ALIGN_12B_L: 12bit left data alignment selected + * DAC_ALIGN_12B_R: 12bit right data alignment selected + * @param Data1 Data for DAC Channel1 to be loaded in the selected data holding register. + * @param Data2 Data for DAC Channel2 to be loaded in the selected data holding register. + * @note In dual mode, a unique register access is required to write in both + * DAC channels at the same time. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef *hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2) +{ + uint32_t data; + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_DAC_ALIGN(Alignment)); + assert_param(IS_DAC_DATA(Data1)); + assert_param(IS_DAC_DATA(Data2)); + + /* Calculate and set dual DAC data holding register value */ + if (Alignment == DAC_ALIGN_8B_R) + { + data = ((uint32_t)Data2 << 8U) | Data1; + } + else + { + data = ((uint32_t)Data2 << 16U) | Data1; + } + + tmp = (uint32_t)hdac->Instance; + tmp += DAC_DHR12RD_ALIGNMENT(Alignment); + + /* Set the dual DAC selected data holding register */ + *(__IO uint32_t *)tmp = data; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Conversion complete callback in non-blocking mode for Channel2. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DACEx_ConvCpltCallbackCh2 could be implemented in the user file + */ +} + +/** + * @brief Conversion half DMA transfer callback in non-blocking mode for Channel2. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DACEx_ConvHalfCpltCallbackCh2 could be implemented in the user file + */ +} + +/** + * @brief Error DAC callback for Channel2. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DACEx_ErrorCallbackCh2 could be implemented in the user file + */ +} + +/** + * @brief DMA underrun DAC callback for Channel2. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DACEx_DMAUnderrunCallbackCh2 could be implemented in the user file + */ +} +#endif /* DAC_CHANNEL2_SUPPORT */ + + +/** + * @} + */ + +/** @defgroup DACEx_Exported_Functions_Group3 Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Set the specified data holding register value for DAC channel. + +@endverbatim + * @{ + */ + +#if defined(DAC_CHANNEL2_SUPPORT) +/** + * @brief Return the last data output value of the selected DAC channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval The selected DAC channel data output value. + */ +uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef *hdac) +{ + uint32_t tmp = 0UL; + + tmp |= hdac->Instance->DOR1; + + tmp |= hdac->Instance->DOR2 << 16UL; + + /* Returns the DAC channel data output register value */ + return tmp; +} +#endif /* DAC_CHANNEL2_SUPPORT */ + +/** + * @} + */ +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup DACEx_Private_Functions DACEx private functions + * @brief Extended private functions + * @{ + */ + +#if defined(DAC_CHANNEL2_SUPPORT) +/** + * @brief DMA conversion complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma) +{ + DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->ConvCpltCallbackCh2(hdac); +#else + HAL_DACEx_ConvCpltCallbackCh2(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + + hdac->State = HAL_DAC_STATE_READY; +} + +/** + * @brief DMA half transfer complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma) +{ + DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + /* Conversion complete callback */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->ConvHalfCpltCallbackCh2(hdac); +#else + HAL_DACEx_ConvHalfCpltCallbackCh2(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA error callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma) +{ + DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Set DAC error code to DMA error */ + hdac->ErrorCode |= HAL_DAC_ERROR_DMA; + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->ErrorCallbackCh2(hdac); +#else + HAL_DACEx_ErrorCallbackCh2(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + + hdac->State = HAL_DAC_STATE_READY; +} +#endif /* DAC_CHANNEL2_SUPPORT */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DAC */ + +#endif /* HAL_DAC_MODULE_ENABLED */ + +/** + * @} + */ + diff --git a/Drivers/stm32f4xx_hal_dac_ex.h b/libs/hal/stm32f4xx_hal_dac_ex.h similarity index 98% rename from Drivers/stm32f4xx_hal_dac_ex.h rename to libs/hal/stm32f4xx_hal_dac_ex.h index 0fee775..db10990 100644 --- a/Drivers/stm32f4xx_hal_dac_ex.h +++ b/libs/hal/stm32f4xx_hal_dac_ex.h @@ -1,205 +1,205 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dac_ex.h - * @author MCD Application Team - * @brief Header file of DAC HAL Extended module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_DAC_EX_H -#define STM32F4xx_HAL_DAC_EX_H - -#ifdef __cplusplus -extern "C" { -#endif - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -#if defined(DAC) - -/** @addtogroup DACEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** - * @brief HAL State structures definition - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup DACEx_Exported_Constants DACEx Exported Constants - * @{ - */ - -/** @defgroup DACEx_lfsrunmask_triangleamplitude DACEx lfsrunmask triangle amplitude - * @{ - */ -#define DAC_LFSRUNMASK_BIT0 0x00000000UL /*!< Unmask DAC channel LFSR bit0 for noise wave generation */ -#define DAC_LFSRUNMASK_BITS1_0 ( DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */ -#define DAC_LFSRUNMASK_BITS2_0 ( DAC_CR_MAMP1_1 ) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */ -#define DAC_LFSRUNMASK_BITS3_0 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */ -#define DAC_LFSRUNMASK_BITS4_0 ( DAC_CR_MAMP1_2 ) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */ -#define DAC_LFSRUNMASK_BITS5_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */ -#define DAC_LFSRUNMASK_BITS6_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 ) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */ -#define DAC_LFSRUNMASK_BITS7_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */ -#define DAC_LFSRUNMASK_BITS8_0 (DAC_CR_MAMP1_3 ) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */ -#define DAC_LFSRUNMASK_BITS9_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */ -#define DAC_LFSRUNMASK_BITS10_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 ) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */ -#define DAC_LFSRUNMASK_BITS11_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */ -#define DAC_TRIANGLEAMPLITUDE_1 0x00000000UL /*!< Select max triangle amplitude of 1 */ -#define DAC_TRIANGLEAMPLITUDE_3 ( DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 3 */ -#define DAC_TRIANGLEAMPLITUDE_7 ( DAC_CR_MAMP1_1 ) /*!< Select max triangle amplitude of 7 */ -#define DAC_TRIANGLEAMPLITUDE_15 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 15 */ -#define DAC_TRIANGLEAMPLITUDE_31 ( DAC_CR_MAMP1_2 ) /*!< Select max triangle amplitude of 31 */ -#define DAC_TRIANGLEAMPLITUDE_63 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 63 */ -#define DAC_TRIANGLEAMPLITUDE_127 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 ) /*!< Select max triangle amplitude of 127 */ -#define DAC_TRIANGLEAMPLITUDE_255 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 255 */ -#define DAC_TRIANGLEAMPLITUDE_511 (DAC_CR_MAMP1_3 ) /*!< Select max triangle amplitude of 511 */ -#define DAC_TRIANGLEAMPLITUDE_1023 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 1023 */ -#define DAC_TRIANGLEAMPLITUDE_2047 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 ) /*!< Select max triangle amplitude of 2047 */ -#define DAC_TRIANGLEAMPLITUDE_4095 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 4095 */ - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ - - -/* Private macro -------------------------------------------------------------*/ - -/** @defgroup DACEx_Private_Macros DACEx Private Macros - * @{ - */ -#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \ - ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \ - ((TRIGGER) == DAC_TRIGGER_T8_TRGO) || \ - ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \ - ((TRIGGER) == DAC_TRIGGER_T5_TRGO) || \ - ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \ - ((TRIGGER) == DAC_TRIGGER_T4_TRGO) || \ - ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \ - ((TRIGGER) == DAC_TRIGGER_SOFTWARE)) - -#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUNMASK_BIT0) || \ - ((VALUE) == DAC_LFSRUNMASK_BITS1_0) || \ - ((VALUE) == DAC_LFSRUNMASK_BITS2_0) || \ - ((VALUE) == DAC_LFSRUNMASK_BITS3_0) || \ - ((VALUE) == DAC_LFSRUNMASK_BITS4_0) || \ - ((VALUE) == DAC_LFSRUNMASK_BITS5_0) || \ - ((VALUE) == DAC_LFSRUNMASK_BITS6_0) || \ - ((VALUE) == DAC_LFSRUNMASK_BITS7_0) || \ - ((VALUE) == DAC_LFSRUNMASK_BITS8_0) || \ - ((VALUE) == DAC_LFSRUNMASK_BITS9_0) || \ - ((VALUE) == DAC_LFSRUNMASK_BITS10_0) || \ - ((VALUE) == DAC_LFSRUNMASK_BITS11_0) || \ - ((VALUE) == DAC_TRIANGLEAMPLITUDE_1) || \ - ((VALUE) == DAC_TRIANGLEAMPLITUDE_3) || \ - ((VALUE) == DAC_TRIANGLEAMPLITUDE_7) || \ - ((VALUE) == DAC_TRIANGLEAMPLITUDE_15) || \ - ((VALUE) == DAC_TRIANGLEAMPLITUDE_31) || \ - ((VALUE) == DAC_TRIANGLEAMPLITUDE_63) || \ - ((VALUE) == DAC_TRIANGLEAMPLITUDE_127) || \ - ((VALUE) == DAC_TRIANGLEAMPLITUDE_255) || \ - ((VALUE) == DAC_TRIANGLEAMPLITUDE_511) || \ - ((VALUE) == DAC_TRIANGLEAMPLITUDE_1023) || \ - ((VALUE) == DAC_TRIANGLEAMPLITUDE_2047) || \ - ((VALUE) == DAC_TRIANGLEAMPLITUDE_4095)) -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/* Extended features functions ***********************************************/ - -/** @addtogroup DACEx_Exported_Functions - * @{ - */ - -/** @addtogroup DACEx_Exported_Functions_Group2 - * @{ - */ -/* IO operation functions *****************************************************/ - -HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude); -HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude); - -#if defined(DAC_CHANNEL2_SUPPORT) -#endif -HAL_StatusTypeDef HAL_DACEx_DualStart(DAC_HandleTypeDef *hdac); -HAL_StatusTypeDef HAL_DACEx_DualStop(DAC_HandleTypeDef *hdac); -HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef *hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2); -uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef *hdac); - -#if defined(DAC_CHANNEL2_SUPPORT) -#endif -void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef *hdac); -void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef *hdac); -void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef *hdac); -void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac); - - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup DACEx_Private_Functions - * @{ - */ -#if defined(DAC_CHANNEL2_SUPPORT) -/* DAC_DMAConvCpltCh2 / DAC_DMAErrorCh2 / DAC_DMAHalfConvCpltCh2 */ -/* are called by HAL_DAC_Start_DMA */ -void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma); -void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma); -void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma); -#endif /* DAC_CHANNEL2_SUPPORT */ -/** - * @} - */ - -/** - * @} - */ - -#endif /* DAC */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F4xx_HAL_DAC_EX_H */ - +/** + ****************************************************************************** + * @file stm32f4xx_hal_dac_ex.h + * @author MCD Application Team + * @brief Header file of DAC HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F4xx_HAL_DAC_EX_H +#define STM32F4xx_HAL_DAC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +#if defined(DAC) + +/** @addtogroup DACEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief HAL State structures definition + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DACEx_Exported_Constants DACEx Exported Constants + * @{ + */ + +/** @defgroup DACEx_lfsrunmask_triangleamplitude DACEx lfsrunmask triangle amplitude + * @{ + */ +#define DAC_LFSRUNMASK_BIT0 0x00000000UL /*!< Unmask DAC channel LFSR bit0 for noise wave generation */ +#define DAC_LFSRUNMASK_BITS1_0 ( DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS2_0 ( DAC_CR_MAMP1_1 ) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS3_0 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS4_0 ( DAC_CR_MAMP1_2 ) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS5_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS6_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 ) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS7_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS8_0 (DAC_CR_MAMP1_3 ) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS9_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS10_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 ) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS11_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */ +#define DAC_TRIANGLEAMPLITUDE_1 0x00000000UL /*!< Select max triangle amplitude of 1 */ +#define DAC_TRIANGLEAMPLITUDE_3 ( DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 3 */ +#define DAC_TRIANGLEAMPLITUDE_7 ( DAC_CR_MAMP1_1 ) /*!< Select max triangle amplitude of 7 */ +#define DAC_TRIANGLEAMPLITUDE_15 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 15 */ +#define DAC_TRIANGLEAMPLITUDE_31 ( DAC_CR_MAMP1_2 ) /*!< Select max triangle amplitude of 31 */ +#define DAC_TRIANGLEAMPLITUDE_63 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 63 */ +#define DAC_TRIANGLEAMPLITUDE_127 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 ) /*!< Select max triangle amplitude of 127 */ +#define DAC_TRIANGLEAMPLITUDE_255 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 255 */ +#define DAC_TRIANGLEAMPLITUDE_511 (DAC_CR_MAMP1_3 ) /*!< Select max triangle amplitude of 511 */ +#define DAC_TRIANGLEAMPLITUDE_1023 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 1023 */ +#define DAC_TRIANGLEAMPLITUDE_2047 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 ) /*!< Select max triangle amplitude of 2047 */ +#define DAC_TRIANGLEAMPLITUDE_4095 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 4095 */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + + +/* Private macro -------------------------------------------------------------*/ + +/** @defgroup DACEx_Private_Macros DACEx Private Macros + * @{ + */ +#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \ + ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T8_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T5_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_T4_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \ + ((TRIGGER) == DAC_TRIGGER_SOFTWARE)) + +#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUNMASK_BIT0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS1_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS2_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS3_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS4_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS5_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS6_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS7_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS8_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS9_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS10_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS11_0) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_1) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_3) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_7) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_15) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_31) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_63) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_127) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_255) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_511) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_1023) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_2047) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_4095)) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/* Extended features functions ***********************************************/ + +/** @addtogroup DACEx_Exported_Functions + * @{ + */ + +/** @addtogroup DACEx_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ + +HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude); +HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude); + +#if defined(DAC_CHANNEL2_SUPPORT) +#endif +HAL_StatusTypeDef HAL_DACEx_DualStart(DAC_HandleTypeDef *hdac); +HAL_StatusTypeDef HAL_DACEx_DualStop(DAC_HandleTypeDef *hdac); +HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef *hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2); +uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef *hdac); + +#if defined(DAC_CHANNEL2_SUPPORT) +#endif +void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef *hdac); +void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef *hdac); +void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef *hdac); +void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac); + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DACEx_Private_Functions + * @{ + */ +#if defined(DAC_CHANNEL2_SUPPORT) +/* DAC_DMAConvCpltCh2 / DAC_DMAErrorCh2 / DAC_DMAHalfConvCpltCh2 */ +/* are called by HAL_DAC_Start_DMA */ +void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma); +void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma); +void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma); +#endif /* DAC_CHANNEL2_SUPPORT */ +/** + * @} + */ + +/** + * @} + */ + +#endif /* DAC */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F4xx_HAL_DAC_EX_H */ + diff --git a/Drivers/stm32f4xx_hal_def.h b/libs/hal/stm32f4xx_hal_def.h similarity index 97% rename from Drivers/stm32f4xx_hal_def.h rename to libs/hal/stm32f4xx_hal_def.h index 094b411..f9bbec2 100644 --- a/Drivers/stm32f4xx_hal_def.h +++ b/libs/hal/stm32f4xx_hal_def.h @@ -1,210 +1,210 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_def.h - * @author MCD Application Team - * @brief This file contains HAL common defines, enumeration, macros and - * structures definitions. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_DEF -#define __STM32F4xx_HAL_DEF - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" -#include "Legacy/stm32_hal_legacy.h" -#include - -/* Exported types ------------------------------------------------------------*/ - -/** - * @brief HAL Status structures definition - */ -typedef enum -{ - HAL_OK = 0x00U, - HAL_ERROR = 0x01U, - HAL_BUSY = 0x02U, - HAL_TIMEOUT = 0x03U -} HAL_StatusTypeDef; - -/** - * @brief HAL Lock structures definition - */ -typedef enum -{ - HAL_UNLOCKED = 0x00U, - HAL_LOCKED = 0x01U -} HAL_LockTypeDef; - -/* Exported macro ------------------------------------------------------------*/ - -#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */ - -#define HAL_MAX_DELAY 0xFFFFFFFFU - -#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT)) -#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U) - -#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \ - do{ \ - (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \ - (__DMA_HANDLE__).Parent = (__HANDLE__); \ - } while(0U) - -/** @brief Reset the Handle's State field. - * @param __HANDLE__ specifies the Peripheral Handle. - * @note This macro can be used for the following purpose: - * - When the Handle is declared as local variable; before passing it as parameter - * to HAL_PPP_Init() for the first time, it is mandatory to use this macro - * to set to 0 the Handle's "State" field. - * Otherwise, "State" field may have any random value and the first time the function - * HAL_PPP_Init() is called, the low level hardware initialization will be missed - * (i.e. HAL_PPP_MspInit() will not be executed). - * - When there is a need to reconfigure the low level hardware: instead of calling - * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init(). - * In this later function, when the Handle's "State" field is set to 0, it will execute the function - * HAL_PPP_MspInit() which will reconfigure the low level hardware. - * @retval None - */ -#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U) - -#if (USE_RTOS == 1U) - /* Reserved for future use */ - #error "USE_RTOS should be 0 in the current HAL release" -#else - #define __HAL_LOCK(__HANDLE__) \ - do{ \ - if((__HANDLE__)->Lock == HAL_LOCKED) \ - { \ - return HAL_BUSY; \ - } \ - else \ - { \ - (__HANDLE__)->Lock = HAL_LOCKED; \ - } \ - }while (0U) - - #define __HAL_UNLOCK(__HANDLE__) \ - do{ \ - (__HANDLE__)->Lock = HAL_UNLOCKED; \ - }while (0U) -#endif /* USE_RTOS */ - -#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ - #ifndef __weak - #define __weak __attribute__((weak)) - #endif - #ifndef __packed - #define __packed __attribute__((packed)) - #endif -#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ - #ifndef __weak - #define __weak __attribute__((weak)) - #endif /* __weak */ - #ifndef __packed - #define __packed __attribute__((__packed__)) - #endif /* __packed */ -#endif /* __GNUC__ */ - - -/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */ -#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ - #ifndef __ALIGN_BEGIN - #define __ALIGN_BEGIN - #endif - #ifndef __ALIGN_END - #define __ALIGN_END __attribute__ ((aligned (4))) - #endif -#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ - #ifndef __ALIGN_END -#define __ALIGN_END __attribute__ ((aligned (4))) - #endif /* __ALIGN_END */ - #ifndef __ALIGN_BEGIN - #define __ALIGN_BEGIN - #endif /* __ALIGN_BEGIN */ -#else - #ifndef __ALIGN_END - #define __ALIGN_END - #endif /* __ALIGN_END */ - #ifndef __ALIGN_BEGIN - #if defined (__CC_ARM) /* ARM Compiler V5*/ -#define __ALIGN_BEGIN __align(4) - #elif defined (__ICCARM__) /* IAR Compiler */ - #define __ALIGN_BEGIN - #endif /* __CC_ARM */ - #endif /* __ALIGN_BEGIN */ -#endif /* __GNUC__ */ - - -/** - * @brief __RAM_FUNC definition - */ -#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) -/* ARM Compiler V4/V5 and V6 - -------------------------- - RAM functions are defined using the toolchain options. - Functions that are executed in RAM should reside in a separate source module. - Using the 'Options for File' dialog you can simply change the 'Code / Const' - area of a module to a memory space in physical RAM. - Available memory areas are declared in the 'Target' tab of the 'Options for Target' - dialog. -*/ -#define __RAM_FUNC - -#elif defined ( __ICCARM__ ) -/* ICCARM Compiler - --------------- - RAM functions are defined using a specific toolchain keyword "__ramfunc". -*/ -#define __RAM_FUNC __ramfunc - -#elif defined ( __GNUC__ ) -/* GNU Compiler - ------------ - RAM functions are defined using a specific toolchain attribute - "__attribute__((section(".RamFunc")))". -*/ -#define __RAM_FUNC __attribute__((section(".RamFunc"))) - -#endif - -/** - * @brief __NOINLINE definition - */ -#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined ( __GNUC__ ) -/* ARM V4/V5 and V6 & GNU Compiler - ------------------------------- -*/ -#define __NOINLINE __attribute__ ( (noinline) ) - -#elif defined ( __ICCARM__ ) -/* ICCARM Compiler - --------------- -*/ -#define __NOINLINE _Pragma("optimize = no_inline") - -#endif - -#ifdef __cplusplus -} -#endif - -#endif /* ___STM32F4xx_HAL_DEF */ - - +/** + ****************************************************************************** + * @file stm32f4xx_hal_def.h + * @author MCD Application Team + * @brief This file contains HAL common defines, enumeration, macros and + * structures definitions. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_DEF +#define __STM32F4xx_HAL_DEF + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" +#include "Legacy/stm32_hal_legacy.h" +#include + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief HAL Status structures definition + */ +typedef enum +{ + HAL_OK = 0x00U, + HAL_ERROR = 0x01U, + HAL_BUSY = 0x02U, + HAL_TIMEOUT = 0x03U +} HAL_StatusTypeDef; + +/** + * @brief HAL Lock structures definition + */ +typedef enum +{ + HAL_UNLOCKED = 0x00U, + HAL_LOCKED = 0x01U +} HAL_LockTypeDef; + +/* Exported macro ------------------------------------------------------------*/ + +#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */ + +#define HAL_MAX_DELAY 0xFFFFFFFFU + +#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT)) +#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U) + +#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \ + do{ \ + (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \ + (__DMA_HANDLE__).Parent = (__HANDLE__); \ + } while(0U) + +/** @brief Reset the Handle's State field. + * @param __HANDLE__ specifies the Peripheral Handle. + * @note This macro can be used for the following purpose: + * - When the Handle is declared as local variable; before passing it as parameter + * to HAL_PPP_Init() for the first time, it is mandatory to use this macro + * to set to 0 the Handle's "State" field. + * Otherwise, "State" field may have any random value and the first time the function + * HAL_PPP_Init() is called, the low level hardware initialization will be missed + * (i.e. HAL_PPP_MspInit() will not be executed). + * - When there is a need to reconfigure the low level hardware: instead of calling + * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init(). + * In this later function, when the Handle's "State" field is set to 0, it will execute the function + * HAL_PPP_MspInit() which will reconfigure the low level hardware. + * @retval None + */ +#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U) + +#if (USE_RTOS == 1U) + /* Reserved for future use */ + #error "USE_RTOS should be 0 in the current HAL release" +#else + #define __HAL_LOCK(__HANDLE__) \ + do{ \ + if((__HANDLE__)->Lock == HAL_LOCKED) \ + { \ + return HAL_BUSY; \ + } \ + else \ + { \ + (__HANDLE__)->Lock = HAL_LOCKED; \ + } \ + }while (0U) + + #define __HAL_UNLOCK(__HANDLE__) \ + do{ \ + (__HANDLE__)->Lock = HAL_UNLOCKED; \ + }while (0U) +#endif /* USE_RTOS */ + +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ + #ifndef __weak + #define __weak __attribute__((weak)) + #endif + #ifndef __packed + #define __packed __attribute__((packed)) + #endif +#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ + #ifndef __weak + #define __weak __attribute__((weak)) + #endif /* __weak */ + #ifndef __packed + #define __packed __attribute__((__packed__)) + #endif /* __packed */ +#endif /* __GNUC__ */ + + +/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */ +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ + #ifndef __ALIGN_BEGIN + #define __ALIGN_BEGIN + #endif + #ifndef __ALIGN_END + #define __ALIGN_END __attribute__ ((aligned (4))) + #endif +#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ + #ifndef __ALIGN_END +#define __ALIGN_END __attribute__ ((aligned (4))) + #endif /* __ALIGN_END */ + #ifndef __ALIGN_BEGIN + #define __ALIGN_BEGIN + #endif /* __ALIGN_BEGIN */ +#else + #ifndef __ALIGN_END + #define __ALIGN_END + #endif /* __ALIGN_END */ + #ifndef __ALIGN_BEGIN + #if defined (__CC_ARM) /* ARM Compiler V5*/ +#define __ALIGN_BEGIN __align(4) + #elif defined (__ICCARM__) /* IAR Compiler */ + #define __ALIGN_BEGIN + #endif /* __CC_ARM */ + #endif /* __ALIGN_BEGIN */ +#endif /* __GNUC__ */ + + +/** + * @brief __RAM_FUNC definition + */ +#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) +/* ARM Compiler V4/V5 and V6 + -------------------------- + RAM functions are defined using the toolchain options. + Functions that are executed in RAM should reside in a separate source module. + Using the 'Options for File' dialog you can simply change the 'Code / Const' + area of a module to a memory space in physical RAM. + Available memory areas are declared in the 'Target' tab of the 'Options for Target' + dialog. +*/ +#define __RAM_FUNC + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- + RAM functions are defined using a specific toolchain keyword "__ramfunc". +*/ +#define __RAM_FUNC __ramfunc + +#elif defined ( __GNUC__ ) +/* GNU Compiler + ------------ + RAM functions are defined using a specific toolchain attribute + "__attribute__((section(".RamFunc")))". +*/ +#define __RAM_FUNC __attribute__((section(".RamFunc"))) + +#endif + +/** + * @brief __NOINLINE definition + */ +#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined ( __GNUC__ ) +/* ARM V4/V5 and V6 & GNU Compiler + ------------------------------- +*/ +#define __NOINLINE __attribute__ ( (noinline) ) + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- +*/ +#define __NOINLINE _Pragma("optimize = no_inline") + +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* ___STM32F4xx_HAL_DEF */ + + diff --git a/Drivers/stm32f4xx_hal_dma.c b/libs/hal/stm32f4xx_hal_dma.c similarity index 96% rename from Drivers/stm32f4xx_hal_dma.c rename to libs/hal/stm32f4xx_hal_dma.c index 2bc5f27..3dbb477 100644 --- a/Drivers/stm32f4xx_hal_dma.c +++ b/libs/hal/stm32f4xx_hal_dma.c @@ -1,1305 +1,1305 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dma.c - * @author MCD Application Team - * @brief DMA HAL module driver. - * - * This file provides firmware functions to manage the following - * functionalities of the Direct Memory Access (DMA) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral State and errors functions - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - (#) Enable and configure the peripheral to be connected to the DMA Stream - (except for internal SRAM/FLASH memories: no initialization is - necessary) please refer to Reference manual for connection between peripherals - and DMA requests. - - (#) For a given Stream, program the required configuration through the following parameters: - Transfer Direction, Source and Destination data formats, - Circular, Normal or peripheral flow control mode, Stream Priority level, - Source and Destination Increment mode, FIFO mode and its Threshold (if needed), - Burst mode for Source and/or Destination (if needed) using HAL_DMA_Init() function. - - -@- Prior to HAL_DMA_Init() the clock must be enabled for DMA through the following macros: - __HAL_RCC_DMA1_CLK_ENABLE() or __HAL_RCC_DMA2_CLK_ENABLE(). - - *** Polling mode IO operation *** - ================================= - [..] - (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source - address and destination address and the Length of data to be transferred. - (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this - case a fixed Timeout can be configured by User depending from his application. - (+) Use HAL_DMA_Abort() function to abort the current transfer. - - *** Interrupt mode IO operation *** - =================================== - [..] - (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority() - (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ() - (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of - Source address and destination address and the Length of data to be transferred. In this - case the DMA interrupt is configured - (+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine - (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can - add his own function by customization of function pointer XferCpltCallback and - XferErrorCallback (i.e a member of DMA handle structure). - [..] - (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error - detection. - - (#) Use HAL_DMA_Abort_IT() function to abort the current transfer - - -@- In Memory-to-Memory transfer mode, Circular mode is not allowed. - - -@- The FIFO is used mainly to reduce bus usage and to allow data packing/unpacking: it is - possible to set different Data Sizes for the Peripheral and the Memory (ie. you can set - Half-Word data size for the peripheral to access its data register and set Word data size - for the Memory to gain in access time. Each two half words will be packed and written in - a single access to a Word in the Memory). - - -@- When FIFO is disabled, it is not allowed to configure different Data Sizes for Source - and Destination. In this case the Peripheral Data Size will be applied to both Source - and Destination. - - *** DMA HAL driver macros list *** - ============================================= - [..] - Below the list of most used macros in DMA HAL driver. - - (+) __HAL_DMA_ENABLE: Enable the specified DMA Stream. - (+) __HAL_DMA_DISABLE: Disable the specified DMA Stream. - (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Stream interrupt has occurred or not. - - [..] - (@) You can refer to the DMA HAL driver header file for more useful macros - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup DMA DMA - * @brief DMA HAL module driver - * @{ - */ - -#ifdef HAL_DMA_MODULE_ENABLED - -/* Private types -------------------------------------------------------------*/ -typedef struct -{ - __IO uint32_t ISR; /*!< DMA interrupt status register */ - __IO uint32_t Reserved0; - __IO uint32_t IFCR; /*!< DMA interrupt flag clear register */ -} DMA_Base_Registers; - -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @addtogroup DMA_Private_Constants - * @{ - */ - #define HAL_TIMEOUT_DMA_ABORT 5U /* 5 ms */ -/** - * @} - */ -/* Private macros ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/** @addtogroup DMA_Private_Functions - * @{ - */ -static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); -static uint32_t DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma); -static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma); - -/** - * @} - */ - -/* Exported functions ---------------------------------------------------------*/ -/** @addtogroup DMA_Exported_Functions - * @{ - */ - -/** @addtogroup DMA_Exported_Functions_Group1 - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] - This section provides functions allowing to initialize the DMA Stream source - and destination addresses, incrementation and data sizes, transfer direction, - circular/normal mode selection, memory-to-memory mode selection and Stream priority value. - [..] - The HAL_DMA_Init() function follows the DMA configuration procedures as described in - reference manual. - -@endverbatim - * @{ - */ - -/** - * @brief Initialize the DMA according to the specified - * parameters in the DMA_InitTypeDef and create the associated handle. - * @param hdma Pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) -{ - uint32_t tmp = 0U; - uint32_t tickstart = HAL_GetTick(); - DMA_Base_Registers *regs; - - /* Check the DMA peripheral state */ - if(hdma == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance)); - assert_param(IS_DMA_CHANNEL(hdma->Init.Channel)); - assert_param(IS_DMA_DIRECTION(hdma->Init.Direction)); - assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc)); - assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc)); - assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment)); - assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment)); - assert_param(IS_DMA_MODE(hdma->Init.Mode)); - assert_param(IS_DMA_PRIORITY(hdma->Init.Priority)); - assert_param(IS_DMA_FIFO_MODE_STATE(hdma->Init.FIFOMode)); - /* Check the memory burst, peripheral burst and FIFO threshold parameters only - when FIFO mode is enabled */ - if(hdma->Init.FIFOMode != DMA_FIFOMODE_DISABLE) - { - assert_param(IS_DMA_FIFO_THRESHOLD(hdma->Init.FIFOThreshold)); - assert_param(IS_DMA_MEMORY_BURST(hdma->Init.MemBurst)); - assert_param(IS_DMA_PERIPHERAL_BURST(hdma->Init.PeriphBurst)); - } - - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - - /* Allocate lock resource */ - __HAL_UNLOCK(hdma); - - /* Disable the peripheral */ - __HAL_DMA_DISABLE(hdma); - - /* Check if the DMA Stream is effectively disabled */ - while((hdma->Instance->CR & DMA_SxCR_EN) != RESET) - { - /* Check for the Timeout */ - if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA_ABORT) - { - /* Update error code */ - hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_TIMEOUT; - - return HAL_TIMEOUT; - } - } - - /* Get the CR register value */ - tmp = hdma->Instance->CR; - - /* Clear CHSEL, MBURST, PBURST, PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR, CT and DBM bits */ - tmp &= ((uint32_t)~(DMA_SxCR_CHSEL | DMA_SxCR_MBURST | DMA_SxCR_PBURST | \ - DMA_SxCR_PL | DMA_SxCR_MSIZE | DMA_SxCR_PSIZE | \ - DMA_SxCR_MINC | DMA_SxCR_PINC | DMA_SxCR_CIRC | \ - DMA_SxCR_DIR | DMA_SxCR_CT | DMA_SxCR_DBM)); - - /* Prepare the DMA Stream configuration */ - tmp |= hdma->Init.Channel | hdma->Init.Direction | - hdma->Init.PeriphInc | hdma->Init.MemInc | - hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment | - hdma->Init.Mode | hdma->Init.Priority; - - /* the Memory burst and peripheral burst are not used when the FIFO is disabled */ - if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE) - { - /* Get memory burst and peripheral burst */ - tmp |= hdma->Init.MemBurst | hdma->Init.PeriphBurst; - } - - /* Write to DMA Stream CR register */ - hdma->Instance->CR = tmp; - - /* Get the FCR register value */ - tmp = hdma->Instance->FCR; - - /* Clear Direct mode and FIFO threshold bits */ - tmp &= (uint32_t)~(DMA_SxFCR_DMDIS | DMA_SxFCR_FTH); - - /* Prepare the DMA Stream FIFO configuration */ - tmp |= hdma->Init.FIFOMode; - - /* The FIFO threshold is not used when the FIFO mode is disabled */ - if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE) - { - /* Get the FIFO threshold */ - tmp |= hdma->Init.FIFOThreshold; - - /* Check compatibility between FIFO threshold level and size of the memory burst */ - /* for INCR4, INCR8, INCR16 bursts */ - if (hdma->Init.MemBurst != DMA_MBURST_SINGLE) - { - if (DMA_CheckFifoParam(hdma) != HAL_OK) - { - /* Update error code */ - hdma->ErrorCode = HAL_DMA_ERROR_PARAM; - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - return HAL_ERROR; - } - } - } - - /* Write to DMA Stream FCR */ - hdma->Instance->FCR = tmp; - - /* Initialize StreamBaseAddress and StreamIndex parameters to be used to calculate - DMA steam Base Address needed by HAL_DMA_IRQHandler() and HAL_DMA_PollForTransfer() */ - regs = (DMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma); - - /* Clear all interrupt flags */ - regs->IFCR = 0x3FU << hdma->StreamIndex; - - /* Initialize the error code */ - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Initialize the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the DMA peripheral - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) -{ - DMA_Base_Registers *regs; - - /* Check the DMA peripheral state */ - if(hdma == NULL) - { - return HAL_ERROR; - } - - /* Check the DMA peripheral state */ - if(hdma->State == HAL_DMA_STATE_BUSY) - { - /* Return error status */ - return HAL_BUSY; - } - - /* Check the parameters */ - assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance)); - - /* Disable the selected DMA Streamx */ - __HAL_DMA_DISABLE(hdma); - - /* Reset DMA Streamx control register */ - hdma->Instance->CR = 0U; - - /* Reset DMA Streamx number of data to transfer register */ - hdma->Instance->NDTR = 0U; - - /* Reset DMA Streamx peripheral address register */ - hdma->Instance->PAR = 0U; - - /* Reset DMA Streamx memory 0 address register */ - hdma->Instance->M0AR = 0U; - - /* Reset DMA Streamx memory 1 address register */ - hdma->Instance->M1AR = 0U; - - /* Reset DMA Streamx FIFO control register */ - hdma->Instance->FCR = 0x00000021U; - - /* Get DMA steam Base Address */ - regs = (DMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma); - - /* Clean all callbacks */ - hdma->XferCpltCallback = NULL; - hdma->XferHalfCpltCallback = NULL; - hdma->XferM1CpltCallback = NULL; - hdma->XferM1HalfCpltCallback = NULL; - hdma->XferErrorCallback = NULL; - hdma->XferAbortCallback = NULL; - - /* Clear all interrupt flags at correct offset within the register */ - regs->IFCR = 0x3FU << hdma->StreamIndex; - - /* Reset the error code */ - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Reset the DMA state */ - hdma->State = HAL_DMA_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(hdma); - - return HAL_OK; -} - -/** - * @} - */ - -/** @addtogroup DMA_Exported_Functions_Group2 - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Configure the source, destination address and data length and Start DMA transfer - (+) Configure the source, destination address and data length and - Start DMA transfer with interrupt - (+) Abort DMA transfer - (+) Poll for transfer complete - (+) Handle DMA interrupt request - -@endverbatim - * @{ - */ - -/** - * @brief Starts the DMA Transfer. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param SrcAddress The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param DataLength The length of data to be transferred from source to destination - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_DMA_BUFFER_SIZE(DataLength)); - - /* Process locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - - /* Initialize the error code */ - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Configure the source, destination address and the data length */ - DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); - - /* Enable the Peripheral */ - __HAL_DMA_ENABLE(hdma); - } - else - { - /* Process unlocked */ - __HAL_UNLOCK(hdma); - - /* Return error status */ - status = HAL_BUSY; - } - return status; -} - -/** - * @brief Start the DMA Transfer with interrupt enabled. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param SrcAddress The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param DataLength The length of data to be transferred from source to destination - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* calculate DMA base and stream number */ - DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress; - - /* Check the parameters */ - assert_param(IS_DMA_BUFFER_SIZE(DataLength)); - - /* Process locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - - /* Initialize the error code */ - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Configure the source, destination address and the data length */ - DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); - - /* Clear all interrupt flags at correct offset within the register */ - regs->IFCR = 0x3FU << hdma->StreamIndex; - - /* Enable Common interrupts*/ - hdma->Instance->CR |= DMA_IT_TC | DMA_IT_TE | DMA_IT_DME; - - if(hdma->XferHalfCpltCallback != NULL) - { - hdma->Instance->CR |= DMA_IT_HT; - } - - /* Enable the Peripheral */ - __HAL_DMA_ENABLE(hdma); - } - else - { - /* Process unlocked */ - __HAL_UNLOCK(hdma); - - /* Return error status */ - status = HAL_BUSY; - } - - return status; -} - -/** - * @brief Aborts the DMA Transfer. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * - * @note After disabling a DMA Stream, a check for wait until the DMA Stream is - * effectively disabled is added. If a Stream is disabled - * while a data transfer is ongoing, the current data will be transferred - * and the Stream will be effectively disabled only after the transfer of - * this single data is finished. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma) -{ - /* calculate DMA base and stream number */ - DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress; - - uint32_t tickstart = HAL_GetTick(); - - if(hdma->State != HAL_DMA_STATE_BUSY) - { - hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - return HAL_ERROR; - } - else - { - /* Disable all the transfer interrupts */ - hdma->Instance->CR &= ~(DMA_IT_TC | DMA_IT_TE | DMA_IT_DME); - hdma->Instance->FCR &= ~(DMA_IT_FE); - - if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL)) - { - hdma->Instance->CR &= ~(DMA_IT_HT); - } - - /* Disable the stream */ - __HAL_DMA_DISABLE(hdma); - - /* Check if the DMA Stream is effectively disabled */ - while((hdma->Instance->CR & DMA_SxCR_EN) != RESET) - { - /* Check for the Timeout */ - if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA_ABORT) - { - /* Update error code */ - hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - return HAL_TIMEOUT; - } - } - - /* Clear all interrupt flags at correct offset within the register */ - regs->IFCR = 0x3FU << hdma->StreamIndex; - - /* Change the DMA state*/ - hdma->State = HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - } - return HAL_OK; -} - -/** - * @brief Aborts the DMA Transfer in Interrupt mode. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma) -{ - if(hdma->State != HAL_DMA_STATE_BUSY) - { - hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; - return HAL_ERROR; - } - else - { - /* Set Abort State */ - hdma->State = HAL_DMA_STATE_ABORT; - - /* Disable the stream */ - __HAL_DMA_DISABLE(hdma); - } - - return HAL_OK; -} - -/** - * @brief Polling for transfer complete. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param CompleteLevel Specifies the DMA level complete. - * @note The polling mode is kept in this version for legacy. it is recommended to use the IT model instead. - * This model could be used for debug purpose. - * @note The HAL_DMA_PollForTransfer API cannot be used in circular and double buffering mode (automatic circular mode). - * @param Timeout Timeout duration. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t mask_cpltlevel; - uint32_t tickstart = HAL_GetTick(); - uint32_t tmpisr; - - /* calculate DMA base and stream number */ - DMA_Base_Registers *regs; - - if(HAL_DMA_STATE_BUSY != hdma->State) - { - /* No transfer ongoing */ - hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; - __HAL_UNLOCK(hdma); - return HAL_ERROR; - } - - /* Polling mode not supported in circular mode and double buffering mode */ - if ((hdma->Instance->CR & DMA_SxCR_CIRC) != RESET) - { - hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; - return HAL_ERROR; - } - - /* Get the level transfer complete flag */ - if(CompleteLevel == HAL_DMA_FULL_TRANSFER) - { - /* Transfer Complete flag */ - mask_cpltlevel = DMA_FLAG_TCIF0_4 << hdma->StreamIndex; - } - else - { - /* Half Transfer Complete flag */ - mask_cpltlevel = DMA_FLAG_HTIF0_4 << hdma->StreamIndex; - } - - regs = (DMA_Base_Registers *)hdma->StreamBaseAddress; - tmpisr = regs->ISR; - - while(((tmpisr & mask_cpltlevel) == RESET) && ((hdma->ErrorCode & HAL_DMA_ERROR_TE) == RESET)) - { - /* Check for the Timeout (Not applicable in circular mode)*/ - if(Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout)) - { - /* Update error code */ - hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - return HAL_TIMEOUT; - } - } - - /* Get the ISR register value */ - tmpisr = regs->ISR; - - if((tmpisr & (DMA_FLAG_TEIF0_4 << hdma->StreamIndex)) != RESET) - { - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_TE; - - /* Clear the transfer error flag */ - regs->IFCR = DMA_FLAG_TEIF0_4 << hdma->StreamIndex; - } - - if((tmpisr & (DMA_FLAG_FEIF0_4 << hdma->StreamIndex)) != RESET) - { - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_FE; - - /* Clear the FIFO error flag */ - regs->IFCR = DMA_FLAG_FEIF0_4 << hdma->StreamIndex; - } - - if((tmpisr & (DMA_FLAG_DMEIF0_4 << hdma->StreamIndex)) != RESET) - { - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_DME; - - /* Clear the Direct Mode error flag */ - regs->IFCR = DMA_FLAG_DMEIF0_4 << hdma->StreamIndex; - } - } - - if(hdma->ErrorCode != HAL_DMA_ERROR_NONE) - { - if((hdma->ErrorCode & HAL_DMA_ERROR_TE) != RESET) - { - HAL_DMA_Abort(hdma); - - /* Clear the half transfer and transfer complete flags */ - regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex; - - /* Change the DMA state */ - hdma->State= HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - return HAL_ERROR; - } - } - - /* Get the level transfer complete flag */ - if(CompleteLevel == HAL_DMA_FULL_TRANSFER) - { - /* Clear the half transfer and transfer complete flags */ - regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex; - - hdma->State = HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - } - else - { - /* Clear the half transfer and transfer complete flags */ - regs->IFCR = (DMA_FLAG_HTIF0_4) << hdma->StreamIndex; - } - - return status; -} - -/** - * @brief Handles DMA interrupt request. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval None - */ -void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) -{ - uint32_t tmpisr; - __IO uint32_t count = 0U; - uint32_t timeout = SystemCoreClock / 9600U; - - /* calculate DMA base and stream number */ - DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress; - - tmpisr = regs->ISR; - - /* Transfer Error Interrupt management ***************************************/ - if ((tmpisr & (DMA_FLAG_TEIF0_4 << hdma->StreamIndex)) != RESET) - { - if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TE) != RESET) - { - /* Disable the transfer error interrupt */ - hdma->Instance->CR &= ~(DMA_IT_TE); - - /* Clear the transfer error flag */ - regs->IFCR = DMA_FLAG_TEIF0_4 << hdma->StreamIndex; - - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_TE; - } - } - /* FIFO Error Interrupt management ******************************************/ - if ((tmpisr & (DMA_FLAG_FEIF0_4 << hdma->StreamIndex)) != RESET) - { - if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_FE) != RESET) - { - /* Clear the FIFO error flag */ - regs->IFCR = DMA_FLAG_FEIF0_4 << hdma->StreamIndex; - - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_FE; - } - } - /* Direct Mode Error Interrupt management ***********************************/ - if ((tmpisr & (DMA_FLAG_DMEIF0_4 << hdma->StreamIndex)) != RESET) - { - if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_DME) != RESET) - { - /* Clear the direct mode error flag */ - regs->IFCR = DMA_FLAG_DMEIF0_4 << hdma->StreamIndex; - - /* Update error code */ - hdma->ErrorCode |= HAL_DMA_ERROR_DME; - } - } - /* Half Transfer Complete Interrupt management ******************************/ - if ((tmpisr & (DMA_FLAG_HTIF0_4 << hdma->StreamIndex)) != RESET) - { - if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_HT) != RESET) - { - /* Clear the half transfer complete flag */ - regs->IFCR = DMA_FLAG_HTIF0_4 << hdma->StreamIndex; - - /* Multi_Buffering mode enabled */ - if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != RESET) - { - /* Current memory buffer used is Memory 0 */ - if((hdma->Instance->CR & DMA_SxCR_CT) == RESET) - { - if(hdma->XferHalfCpltCallback != NULL) - { - /* Half transfer callback */ - hdma->XferHalfCpltCallback(hdma); - } - } - /* Current memory buffer used is Memory 1 */ - else - { - if(hdma->XferM1HalfCpltCallback != NULL) - { - /* Half transfer callback */ - hdma->XferM1HalfCpltCallback(hdma); - } - } - } - else - { - /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */ - if((hdma->Instance->CR & DMA_SxCR_CIRC) == RESET) - { - /* Disable the half transfer interrupt */ - hdma->Instance->CR &= ~(DMA_IT_HT); - } - - if(hdma->XferHalfCpltCallback != NULL) - { - /* Half transfer callback */ - hdma->XferHalfCpltCallback(hdma); - } - } - } - } - /* Transfer Complete Interrupt management ***********************************/ - if ((tmpisr & (DMA_FLAG_TCIF0_4 << hdma->StreamIndex)) != RESET) - { - if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TC) != RESET) - { - /* Clear the transfer complete flag */ - regs->IFCR = DMA_FLAG_TCIF0_4 << hdma->StreamIndex; - - if(HAL_DMA_STATE_ABORT == hdma->State) - { - /* Disable all the transfer interrupts */ - hdma->Instance->CR &= ~(DMA_IT_TC | DMA_IT_TE | DMA_IT_DME); - hdma->Instance->FCR &= ~(DMA_IT_FE); - - if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL)) - { - hdma->Instance->CR &= ~(DMA_IT_HT); - } - - /* Clear all interrupt flags at correct offset within the register */ - regs->IFCR = 0x3FU << hdma->StreamIndex; - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - if(hdma->XferAbortCallback != NULL) - { - hdma->XferAbortCallback(hdma); - } - return; - } - - if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != RESET) - { - /* Current memory buffer used is Memory 0 */ - if((hdma->Instance->CR & DMA_SxCR_CT) == RESET) - { - if(hdma->XferM1CpltCallback != NULL) - { - /* Transfer complete Callback for memory1 */ - hdma->XferM1CpltCallback(hdma); - } - } - /* Current memory buffer used is Memory 1 */ - else - { - if(hdma->XferCpltCallback != NULL) - { - /* Transfer complete Callback for memory0 */ - hdma->XferCpltCallback(hdma); - } - } - } - /* Disable the transfer complete interrupt if the DMA mode is not CIRCULAR */ - else - { - if((hdma->Instance->CR & DMA_SxCR_CIRC) == RESET) - { - /* Disable the transfer complete interrupt */ - hdma->Instance->CR &= ~(DMA_IT_TC); - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - } - - if(hdma->XferCpltCallback != NULL) - { - /* Transfer complete callback */ - hdma->XferCpltCallback(hdma); - } - } - } - } - - /* manage error case */ - if(hdma->ErrorCode != HAL_DMA_ERROR_NONE) - { - if((hdma->ErrorCode & HAL_DMA_ERROR_TE) != RESET) - { - hdma->State = HAL_DMA_STATE_ABORT; - - /* Disable the stream */ - __HAL_DMA_DISABLE(hdma); - - do - { - if (++count > timeout) - { - break; - } - } - while((hdma->Instance->CR & DMA_SxCR_EN) != RESET); - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - } - - if(hdma->XferErrorCallback != NULL) - { - /* Transfer error callback */ - hdma->XferErrorCallback(hdma); - } - } -} - -/** - * @brief Register callbacks - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param CallbackID User Callback identifier - * a DMA_HandleTypeDef structure as parameter. - * @param pCallback pointer to private callback function which has pointer to - * a DMA_HandleTypeDef structure as parameter. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)) -{ - - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - switch (CallbackID) - { - case HAL_DMA_XFER_CPLT_CB_ID: - hdma->XferCpltCallback = pCallback; - break; - - case HAL_DMA_XFER_HALFCPLT_CB_ID: - hdma->XferHalfCpltCallback = pCallback; - break; - - case HAL_DMA_XFER_M1CPLT_CB_ID: - hdma->XferM1CpltCallback = pCallback; - break; - - case HAL_DMA_XFER_M1HALFCPLT_CB_ID: - hdma->XferM1HalfCpltCallback = pCallback; - break; - - case HAL_DMA_XFER_ERROR_CB_ID: - hdma->XferErrorCallback = pCallback; - break; - - case HAL_DMA_XFER_ABORT_CB_ID: - hdma->XferAbortCallback = pCallback; - break; - - default: - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hdma); - - return status; -} - -/** - * @brief UnRegister callbacks - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param CallbackID User Callback identifier - * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - switch (CallbackID) - { - case HAL_DMA_XFER_CPLT_CB_ID: - hdma->XferCpltCallback = NULL; - break; - - case HAL_DMA_XFER_HALFCPLT_CB_ID: - hdma->XferHalfCpltCallback = NULL; - break; - - case HAL_DMA_XFER_M1CPLT_CB_ID: - hdma->XferM1CpltCallback = NULL; - break; - - case HAL_DMA_XFER_M1HALFCPLT_CB_ID: - hdma->XferM1HalfCpltCallback = NULL; - break; - - case HAL_DMA_XFER_ERROR_CB_ID: - hdma->XferErrorCallback = NULL; - break; - - case HAL_DMA_XFER_ABORT_CB_ID: - hdma->XferAbortCallback = NULL; - break; - - case HAL_DMA_XFER_ALL_CB_ID: - hdma->XferCpltCallback = NULL; - hdma->XferHalfCpltCallback = NULL; - hdma->XferM1CpltCallback = NULL; - hdma->XferM1HalfCpltCallback = NULL; - hdma->XferErrorCallback = NULL; - hdma->XferAbortCallback = NULL; - break; - - default: - status = HAL_ERROR; - break; - } - } - else - { - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hdma); - - return status; -} - -/** - * @} - */ - -/** @addtogroup DMA_Exported_Functions_Group3 - * -@verbatim - =============================================================================== - ##### State and Errors functions ##### - =============================================================================== - [..] - This subsection provides functions allowing to - (+) Check the DMA state - (+) Get error code - -@endverbatim - * @{ - */ - -/** - * @brief Returns the DMA state. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval HAL state - */ -HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma) -{ - return hdma->State; -} - -/** - * @brief Return the DMA error code - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval DMA Error Code - */ -uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma) -{ - return hdma->ErrorCode; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup DMA_Private_Functions - * @{ - */ - -/** - * @brief Sets the DMA Transfer parameter. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param SrcAddress The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param DataLength The length of data to be transferred from source to destination - * @retval HAL status - */ -static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) -{ - /* Clear DBM bit */ - hdma->Instance->CR &= (uint32_t)(~DMA_SxCR_DBM); - - /* Configure DMA Stream data length */ - hdma->Instance->NDTR = DataLength; - - /* Memory to Peripheral */ - if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) - { - /* Configure DMA Stream destination address */ - hdma->Instance->PAR = DstAddress; - - /* Configure DMA Stream source address */ - hdma->Instance->M0AR = SrcAddress; - } - /* Peripheral to Memory */ - else - { - /* Configure DMA Stream source address */ - hdma->Instance->PAR = SrcAddress; - - /* Configure DMA Stream destination address */ - hdma->Instance->M0AR = DstAddress; - } -} - -/** - * @brief Returns the DMA Stream base address depending on stream number - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval Stream base address - */ -static uint32_t DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma) -{ - uint32_t stream_number = (((uint32_t)hdma->Instance & 0xFFU) - 16U) / 24U; - - /* lookup table for necessary bitshift of flags within status registers */ - static const uint8_t flagBitshiftOffset[8U] = {0U, 6U, 16U, 22U, 0U, 6U, 16U, 22U}; - hdma->StreamIndex = flagBitshiftOffset[stream_number]; - - if (stream_number > 3U) - { - /* return pointer to HISR and HIFCR */ - hdma->StreamBaseAddress = (((uint32_t)hdma->Instance & (uint32_t)(~0x3FFU)) + 4U); - } - else - { - /* return pointer to LISR and LIFCR */ - hdma->StreamBaseAddress = ((uint32_t)hdma->Instance & (uint32_t)(~0x3FFU)); - } - - return hdma->StreamBaseAddress; -} - -/** - * @brief Check compatibility between FIFO threshold level and size of the memory burst - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @retval HAL status - */ -static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmp = hdma->Init.FIFOThreshold; - - /* Memory Data size equal to Byte */ - if(hdma->Init.MemDataAlignment == DMA_MDATAALIGN_BYTE) - { - switch (tmp) - { - case DMA_FIFO_THRESHOLD_1QUARTERFULL: - case DMA_FIFO_THRESHOLD_3QUARTERSFULL: - if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1) - { - status = HAL_ERROR; - } - break; - case DMA_FIFO_THRESHOLD_HALFFULL: - if (hdma->Init.MemBurst == DMA_MBURST_INC16) - { - status = HAL_ERROR; - } - break; - case DMA_FIFO_THRESHOLD_FULL: - break; - default: - break; - } - } - - /* Memory Data size equal to Half-Word */ - else if (hdma->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) - { - switch (tmp) - { - case DMA_FIFO_THRESHOLD_1QUARTERFULL: - case DMA_FIFO_THRESHOLD_3QUARTERSFULL: - status = HAL_ERROR; - break; - case DMA_FIFO_THRESHOLD_HALFFULL: - if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1) - { - status = HAL_ERROR; - } - break; - case DMA_FIFO_THRESHOLD_FULL: - if (hdma->Init.MemBurst == DMA_MBURST_INC16) - { - status = HAL_ERROR; - } - break; - default: - break; - } - } - - /* Memory Data size equal to Word */ - else - { - switch (tmp) - { - case DMA_FIFO_THRESHOLD_1QUARTERFULL: - case DMA_FIFO_THRESHOLD_HALFFULL: - case DMA_FIFO_THRESHOLD_3QUARTERSFULL: - status = HAL_ERROR; - break; - case DMA_FIFO_THRESHOLD_FULL: - if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1) - { - status = HAL_ERROR; - } - break; - default: - break; - } - } - - return status; -} - -/** - * @} - */ - -#endif /* HAL_DMA_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - +/** + ****************************************************************************** + * @file stm32f4xx_hal_dma.c + * @author MCD Application Team + * @brief DMA HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the Direct Memory Access (DMA) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and errors functions + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable and configure the peripheral to be connected to the DMA Stream + (except for internal SRAM/FLASH memories: no initialization is + necessary) please refer to Reference manual for connection between peripherals + and DMA requests. + + (#) For a given Stream, program the required configuration through the following parameters: + Transfer Direction, Source and Destination data formats, + Circular, Normal or peripheral flow control mode, Stream Priority level, + Source and Destination Increment mode, FIFO mode and its Threshold (if needed), + Burst mode for Source and/or Destination (if needed) using HAL_DMA_Init() function. + + -@- Prior to HAL_DMA_Init() the clock must be enabled for DMA through the following macros: + __HAL_RCC_DMA1_CLK_ENABLE() or __HAL_RCC_DMA2_CLK_ENABLE(). + + *** Polling mode IO operation *** + ================================= + [..] + (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source + address and destination address and the Length of data to be transferred. + (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this + case a fixed Timeout can be configured by User depending from his application. + (+) Use HAL_DMA_Abort() function to abort the current transfer. + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority() + (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ() + (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of + Source address and destination address and the Length of data to be transferred. In this + case the DMA interrupt is configured + (+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine + (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can + add his own function by customization of function pointer XferCpltCallback and + XferErrorCallback (i.e a member of DMA handle structure). + [..] + (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error + detection. + + (#) Use HAL_DMA_Abort_IT() function to abort the current transfer + + -@- In Memory-to-Memory transfer mode, Circular mode is not allowed. + + -@- The FIFO is used mainly to reduce bus usage and to allow data packing/unpacking: it is + possible to set different Data Sizes for the Peripheral and the Memory (ie. you can set + Half-Word data size for the peripheral to access its data register and set Word data size + for the Memory to gain in access time. Each two half words will be packed and written in + a single access to a Word in the Memory). + + -@- When FIFO is disabled, it is not allowed to configure different Data Sizes for Source + and Destination. In this case the Peripheral Data Size will be applied to both Source + and Destination. + + *** DMA HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in DMA HAL driver. + + (+) __HAL_DMA_ENABLE: Enable the specified DMA Stream. + (+) __HAL_DMA_DISABLE: Disable the specified DMA Stream. + (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Stream interrupt has occurred or not. + + [..] + (@) You can refer to the DMA HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup DMA DMA + * @brief DMA HAL module driver + * @{ + */ + +#ifdef HAL_DMA_MODULE_ENABLED + +/* Private types -------------------------------------------------------------*/ +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register */ + __IO uint32_t Reserved0; + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register */ +} DMA_Base_Registers; + +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup DMA_Private_Constants + * @{ + */ + #define HAL_TIMEOUT_DMA_ABORT 5U /* 5 ms */ +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup DMA_Private_Functions + * @{ + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +static uint32_t DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma); + +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ +/** @addtogroup DMA_Exported_Functions + * @{ + */ + +/** @addtogroup DMA_Exported_Functions_Group1 + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to initialize the DMA Stream source + and destination addresses, incrementation and data sizes, transfer direction, + circular/normal mode selection, memory-to-memory mode selection and Stream priority value. + [..] + The HAL_DMA_Init() function follows the DMA configuration procedures as described in + reference manual. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the DMA according to the specified + * parameters in the DMA_InitTypeDef and create the associated handle. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) +{ + uint32_t tmp = 0U; + uint32_t tickstart = HAL_GetTick(); + DMA_Base_Registers *regs; + + /* Check the DMA peripheral state */ + if(hdma == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance)); + assert_param(IS_DMA_CHANNEL(hdma->Init.Channel)); + assert_param(IS_DMA_DIRECTION(hdma->Init.Direction)); + assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc)); + assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc)); + assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment)); + assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment)); + assert_param(IS_DMA_MODE(hdma->Init.Mode)); + assert_param(IS_DMA_PRIORITY(hdma->Init.Priority)); + assert_param(IS_DMA_FIFO_MODE_STATE(hdma->Init.FIFOMode)); + /* Check the memory burst, peripheral burst and FIFO threshold parameters only + when FIFO mode is enabled */ + if(hdma->Init.FIFOMode != DMA_FIFOMODE_DISABLE) + { + assert_param(IS_DMA_FIFO_THRESHOLD(hdma->Init.FIFOThreshold)); + assert_param(IS_DMA_MEMORY_BURST(hdma->Init.MemBurst)); + assert_param(IS_DMA_PERIPHERAL_BURST(hdma->Init.PeriphBurst)); + } + + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Allocate lock resource */ + __HAL_UNLOCK(hdma); + + /* Disable the peripheral */ + __HAL_DMA_DISABLE(hdma); + + /* Check if the DMA Stream is effectively disabled */ + while((hdma->Instance->CR & DMA_SxCR_EN) != RESET) + { + /* Check for the Timeout */ + if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA_ABORT) + { + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_TIMEOUT; + + return HAL_TIMEOUT; + } + } + + /* Get the CR register value */ + tmp = hdma->Instance->CR; + + /* Clear CHSEL, MBURST, PBURST, PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR, CT and DBM bits */ + tmp &= ((uint32_t)~(DMA_SxCR_CHSEL | DMA_SxCR_MBURST | DMA_SxCR_PBURST | \ + DMA_SxCR_PL | DMA_SxCR_MSIZE | DMA_SxCR_PSIZE | \ + DMA_SxCR_MINC | DMA_SxCR_PINC | DMA_SxCR_CIRC | \ + DMA_SxCR_DIR | DMA_SxCR_CT | DMA_SxCR_DBM)); + + /* Prepare the DMA Stream configuration */ + tmp |= hdma->Init.Channel | hdma->Init.Direction | + hdma->Init.PeriphInc | hdma->Init.MemInc | + hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment | + hdma->Init.Mode | hdma->Init.Priority; + + /* the Memory burst and peripheral burst are not used when the FIFO is disabled */ + if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE) + { + /* Get memory burst and peripheral burst */ + tmp |= hdma->Init.MemBurst | hdma->Init.PeriphBurst; + } + + /* Write to DMA Stream CR register */ + hdma->Instance->CR = tmp; + + /* Get the FCR register value */ + tmp = hdma->Instance->FCR; + + /* Clear Direct mode and FIFO threshold bits */ + tmp &= (uint32_t)~(DMA_SxFCR_DMDIS | DMA_SxFCR_FTH); + + /* Prepare the DMA Stream FIFO configuration */ + tmp |= hdma->Init.FIFOMode; + + /* The FIFO threshold is not used when the FIFO mode is disabled */ + if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE) + { + /* Get the FIFO threshold */ + tmp |= hdma->Init.FIFOThreshold; + + /* Check compatibility between FIFO threshold level and size of the memory burst */ + /* for INCR4, INCR8, INCR16 bursts */ + if (hdma->Init.MemBurst != DMA_MBURST_SINGLE) + { + if (DMA_CheckFifoParam(hdma) != HAL_OK) + { + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_PARAM; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + return HAL_ERROR; + } + } + } + + /* Write to DMA Stream FCR */ + hdma->Instance->FCR = tmp; + + /* Initialize StreamBaseAddress and StreamIndex parameters to be used to calculate + DMA steam Base Address needed by HAL_DMA_IRQHandler() and HAL_DMA_PollForTransfer() */ + regs = (DMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma); + + /* Clear all interrupt flags */ + regs->IFCR = 0x3FU << hdma->StreamIndex; + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the DMA peripheral + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) +{ + DMA_Base_Registers *regs; + + /* Check the DMA peripheral state */ + if(hdma == NULL) + { + return HAL_ERROR; + } + + /* Check the DMA peripheral state */ + if(hdma->State == HAL_DMA_STATE_BUSY) + { + /* Return error status */ + return HAL_BUSY; + } + + /* Check the parameters */ + assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance)); + + /* Disable the selected DMA Streamx */ + __HAL_DMA_DISABLE(hdma); + + /* Reset DMA Streamx control register */ + hdma->Instance->CR = 0U; + + /* Reset DMA Streamx number of data to transfer register */ + hdma->Instance->NDTR = 0U; + + /* Reset DMA Streamx peripheral address register */ + hdma->Instance->PAR = 0U; + + /* Reset DMA Streamx memory 0 address register */ + hdma->Instance->M0AR = 0U; + + /* Reset DMA Streamx memory 1 address register */ + hdma->Instance->M1AR = 0U; + + /* Reset DMA Streamx FIFO control register */ + hdma->Instance->FCR = 0x00000021U; + + /* Get DMA steam Base Address */ + regs = (DMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma); + + /* Clean all callbacks */ + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferM1CpltCallback = NULL; + hdma->XferM1HalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + + /* Clear all interrupt flags at correct offset within the register */ + regs->IFCR = 0x3FU << hdma->StreamIndex; + + /* Reset the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Reset the DMA state */ + hdma->State = HAL_DMA_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group2 + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the source, destination address and data length and Start DMA transfer + (+) Configure the source, destination address and data length and + Start DMA transfer with interrupt + (+) Abort DMA transfer + (+) Poll for transfer complete + (+) Handle DMA interrupt request + +@endverbatim + * @{ + */ + +/** + * @brief Starts the DMA Transfer. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Configure the source, destination address and the data length */ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the Peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + /* Return error status */ + status = HAL_BUSY; + } + return status; +} + +/** + * @brief Start the DMA Transfer with interrupt enabled. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* calculate DMA base and stream number */ + DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Configure the source, destination address and the data length */ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Clear all interrupt flags at correct offset within the register */ + regs->IFCR = 0x3FU << hdma->StreamIndex; + + /* Enable Common interrupts*/ + hdma->Instance->CR |= DMA_IT_TC | DMA_IT_TE | DMA_IT_DME; + + if(hdma->XferHalfCpltCallback != NULL) + { + hdma->Instance->CR |= DMA_IT_HT; + } + + /* Enable the Peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + /* Return error status */ + status = HAL_BUSY; + } + + return status; +} + +/** + * @brief Aborts the DMA Transfer. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * + * @note After disabling a DMA Stream, a check for wait until the DMA Stream is + * effectively disabled is added. If a Stream is disabled + * while a data transfer is ongoing, the current data will be transferred + * and the Stream will be effectively disabled only after the transfer of + * this single data is finished. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma) +{ + /* calculate DMA base and stream number */ + DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress; + + uint32_t tickstart = HAL_GetTick(); + + if(hdma->State != HAL_DMA_STATE_BUSY) + { + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + else + { + /* Disable all the transfer interrupts */ + hdma->Instance->CR &= ~(DMA_IT_TC | DMA_IT_TE | DMA_IT_DME); + hdma->Instance->FCR &= ~(DMA_IT_FE); + + if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL)) + { + hdma->Instance->CR &= ~(DMA_IT_HT); + } + + /* Disable the stream */ + __HAL_DMA_DISABLE(hdma); + + /* Check if the DMA Stream is effectively disabled */ + while((hdma->Instance->CR & DMA_SxCR_EN) != RESET) + { + /* Check for the Timeout */ + if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA_ABORT) + { + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_TIMEOUT; + } + } + + /* Clear all interrupt flags at correct offset within the register */ + regs->IFCR = 0x3FU << hdma->StreamIndex; + + /* Change the DMA state*/ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + } + return HAL_OK; +} + +/** + * @brief Aborts the DMA Transfer in Interrupt mode. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma) +{ + if(hdma->State != HAL_DMA_STATE_BUSY) + { + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + return HAL_ERROR; + } + else + { + /* Set Abort State */ + hdma->State = HAL_DMA_STATE_ABORT; + + /* Disable the stream */ + __HAL_DMA_DISABLE(hdma); + } + + return HAL_OK; +} + +/** + * @brief Polling for transfer complete. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param CompleteLevel Specifies the DMA level complete. + * @note The polling mode is kept in this version for legacy. it is recommended to use the IT model instead. + * This model could be used for debug purpose. + * @note The HAL_DMA_PollForTransfer API cannot be used in circular and double buffering mode (automatic circular mode). + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t mask_cpltlevel; + uint32_t tickstart = HAL_GetTick(); + uint32_t tmpisr; + + /* calculate DMA base and stream number */ + DMA_Base_Registers *regs; + + if(HAL_DMA_STATE_BUSY != hdma->State) + { + /* No transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + __HAL_UNLOCK(hdma); + return HAL_ERROR; + } + + /* Polling mode not supported in circular mode and double buffering mode */ + if ((hdma->Instance->CR & DMA_SxCR_CIRC) != RESET) + { + hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; + return HAL_ERROR; + } + + /* Get the level transfer complete flag */ + if(CompleteLevel == HAL_DMA_FULL_TRANSFER) + { + /* Transfer Complete flag */ + mask_cpltlevel = DMA_FLAG_TCIF0_4 << hdma->StreamIndex; + } + else + { + /* Half Transfer Complete flag */ + mask_cpltlevel = DMA_FLAG_HTIF0_4 << hdma->StreamIndex; + } + + regs = (DMA_Base_Registers *)hdma->StreamBaseAddress; + tmpisr = regs->ISR; + + while(((tmpisr & mask_cpltlevel) == RESET) && ((hdma->ErrorCode & HAL_DMA_ERROR_TE) == RESET)) + { + /* Check for the Timeout (Not applicable in circular mode)*/ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout)) + { + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_TIMEOUT; + } + } + + /* Get the ISR register value */ + tmpisr = regs->ISR; + + if((tmpisr & (DMA_FLAG_TEIF0_4 << hdma->StreamIndex)) != RESET) + { + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_TE; + + /* Clear the transfer error flag */ + regs->IFCR = DMA_FLAG_TEIF0_4 << hdma->StreamIndex; + } + + if((tmpisr & (DMA_FLAG_FEIF0_4 << hdma->StreamIndex)) != RESET) + { + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_FE; + + /* Clear the FIFO error flag */ + regs->IFCR = DMA_FLAG_FEIF0_4 << hdma->StreamIndex; + } + + if((tmpisr & (DMA_FLAG_DMEIF0_4 << hdma->StreamIndex)) != RESET) + { + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_DME; + + /* Clear the Direct Mode error flag */ + regs->IFCR = DMA_FLAG_DMEIF0_4 << hdma->StreamIndex; + } + } + + if(hdma->ErrorCode != HAL_DMA_ERROR_NONE) + { + if((hdma->ErrorCode & HAL_DMA_ERROR_TE) != RESET) + { + HAL_DMA_Abort(hdma); + + /* Clear the half transfer and transfer complete flags */ + regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex; + + /* Change the DMA state */ + hdma->State= HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + } + + /* Get the level transfer complete flag */ + if(CompleteLevel == HAL_DMA_FULL_TRANSFER) + { + /* Clear the half transfer and transfer complete flags */ + regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex; + + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + } + else + { + /* Clear the half transfer and transfer complete flags */ + regs->IFCR = (DMA_FLAG_HTIF0_4) << hdma->StreamIndex; + } + + return status; +} + +/** + * @brief Handles DMA interrupt request. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval None + */ +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) +{ + uint32_t tmpisr; + __IO uint32_t count = 0U; + uint32_t timeout = SystemCoreClock / 9600U; + + /* calculate DMA base and stream number */ + DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress; + + tmpisr = regs->ISR; + + /* Transfer Error Interrupt management ***************************************/ + if ((tmpisr & (DMA_FLAG_TEIF0_4 << hdma->StreamIndex)) != RESET) + { + if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TE) != RESET) + { + /* Disable the transfer error interrupt */ + hdma->Instance->CR &= ~(DMA_IT_TE); + + /* Clear the transfer error flag */ + regs->IFCR = DMA_FLAG_TEIF0_4 << hdma->StreamIndex; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_TE; + } + } + /* FIFO Error Interrupt management ******************************************/ + if ((tmpisr & (DMA_FLAG_FEIF0_4 << hdma->StreamIndex)) != RESET) + { + if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_FE) != RESET) + { + /* Clear the FIFO error flag */ + regs->IFCR = DMA_FLAG_FEIF0_4 << hdma->StreamIndex; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_FE; + } + } + /* Direct Mode Error Interrupt management ***********************************/ + if ((tmpisr & (DMA_FLAG_DMEIF0_4 << hdma->StreamIndex)) != RESET) + { + if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_DME) != RESET) + { + /* Clear the direct mode error flag */ + regs->IFCR = DMA_FLAG_DMEIF0_4 << hdma->StreamIndex; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_DME; + } + } + /* Half Transfer Complete Interrupt management ******************************/ + if ((tmpisr & (DMA_FLAG_HTIF0_4 << hdma->StreamIndex)) != RESET) + { + if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_HT) != RESET) + { + /* Clear the half transfer complete flag */ + regs->IFCR = DMA_FLAG_HTIF0_4 << hdma->StreamIndex; + + /* Multi_Buffering mode enabled */ + if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != RESET) + { + /* Current memory buffer used is Memory 0 */ + if((hdma->Instance->CR & DMA_SxCR_CT) == RESET) + { + if(hdma->XferHalfCpltCallback != NULL) + { + /* Half transfer callback */ + hdma->XferHalfCpltCallback(hdma); + } + } + /* Current memory buffer used is Memory 1 */ + else + { + if(hdma->XferM1HalfCpltCallback != NULL) + { + /* Half transfer callback */ + hdma->XferM1HalfCpltCallback(hdma); + } + } + } + else + { + /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */ + if((hdma->Instance->CR & DMA_SxCR_CIRC) == RESET) + { + /* Disable the half transfer interrupt */ + hdma->Instance->CR &= ~(DMA_IT_HT); + } + + if(hdma->XferHalfCpltCallback != NULL) + { + /* Half transfer callback */ + hdma->XferHalfCpltCallback(hdma); + } + } + } + } + /* Transfer Complete Interrupt management ***********************************/ + if ((tmpisr & (DMA_FLAG_TCIF0_4 << hdma->StreamIndex)) != RESET) + { + if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TC) != RESET) + { + /* Clear the transfer complete flag */ + regs->IFCR = DMA_FLAG_TCIF0_4 << hdma->StreamIndex; + + if(HAL_DMA_STATE_ABORT == hdma->State) + { + /* Disable all the transfer interrupts */ + hdma->Instance->CR &= ~(DMA_IT_TC | DMA_IT_TE | DMA_IT_DME); + hdma->Instance->FCR &= ~(DMA_IT_FE); + + if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL)) + { + hdma->Instance->CR &= ~(DMA_IT_HT); + } + + /* Clear all interrupt flags at correct offset within the register */ + regs->IFCR = 0x3FU << hdma->StreamIndex; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if(hdma->XferAbortCallback != NULL) + { + hdma->XferAbortCallback(hdma); + } + return; + } + + if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != RESET) + { + /* Current memory buffer used is Memory 0 */ + if((hdma->Instance->CR & DMA_SxCR_CT) == RESET) + { + if(hdma->XferM1CpltCallback != NULL) + { + /* Transfer complete Callback for memory1 */ + hdma->XferM1CpltCallback(hdma); + } + } + /* Current memory buffer used is Memory 1 */ + else + { + if(hdma->XferCpltCallback != NULL) + { + /* Transfer complete Callback for memory0 */ + hdma->XferCpltCallback(hdma); + } + } + } + /* Disable the transfer complete interrupt if the DMA mode is not CIRCULAR */ + else + { + if((hdma->Instance->CR & DMA_SxCR_CIRC) == RESET) + { + /* Disable the transfer complete interrupt */ + hdma->Instance->CR &= ~(DMA_IT_TC); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + } + + if(hdma->XferCpltCallback != NULL) + { + /* Transfer complete callback */ + hdma->XferCpltCallback(hdma); + } + } + } + } + + /* manage error case */ + if(hdma->ErrorCode != HAL_DMA_ERROR_NONE) + { + if((hdma->ErrorCode & HAL_DMA_ERROR_TE) != RESET) + { + hdma->State = HAL_DMA_STATE_ABORT; + + /* Disable the stream */ + __HAL_DMA_DISABLE(hdma); + + do + { + if (++count > timeout) + { + break; + } + } + while((hdma->Instance->CR & DMA_SxCR_EN) != RESET); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + } + + if(hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } +} + +/** + * @brief Register callbacks + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param CallbackID User Callback identifier + * a DMA_HandleTypeDef structure as parameter. + * @param pCallback pointer to private callback function which has pointer to + * a DMA_HandleTypeDef structure as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)) +{ + + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_M1CPLT_CB_ID: + hdma->XferM1CpltCallback = pCallback; + break; + + case HAL_DMA_XFER_M1HALFCPLT_CB_ID: + hdma->XferM1HalfCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = pCallback; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = pCallback; + break; + + default: + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @brief UnRegister callbacks + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param CallbackID User Callback identifier + * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = NULL; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = NULL; + break; + + case HAL_DMA_XFER_M1CPLT_CB_ID: + hdma->XferM1CpltCallback = NULL; + break; + + case HAL_DMA_XFER_M1HALFCPLT_CB_ID: + hdma->XferM1HalfCpltCallback = NULL; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = NULL; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = NULL; + break; + + case HAL_DMA_XFER_ALL_CB_ID: + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferM1CpltCallback = NULL; + hdma->XferM1HalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group3 + * +@verbatim + =============================================================================== + ##### State and Errors functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Check the DMA state + (+) Get error code + +@endverbatim + * @{ + */ + +/** + * @brief Returns the DMA state. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval HAL state + */ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma) +{ + return hdma->State; +} + +/** + * @brief Return the DMA error code + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval DMA Error Code + */ +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma) +{ + return hdma->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DMA_Private_Functions + * @{ + */ + +/** + * @brief Sets the DMA Transfer parameter. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + /* Clear DBM bit */ + hdma->Instance->CR &= (uint32_t)(~DMA_SxCR_DBM); + + /* Configure DMA Stream data length */ + hdma->Instance->NDTR = DataLength; + + /* Memory to Peripheral */ + if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) + { + /* Configure DMA Stream destination address */ + hdma->Instance->PAR = DstAddress; + + /* Configure DMA Stream source address */ + hdma->Instance->M0AR = SrcAddress; + } + /* Peripheral to Memory */ + else + { + /* Configure DMA Stream source address */ + hdma->Instance->PAR = SrcAddress; + + /* Configure DMA Stream destination address */ + hdma->Instance->M0AR = DstAddress; + } +} + +/** + * @brief Returns the DMA Stream base address depending on stream number + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval Stream base address + */ +static uint32_t DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma) +{ + uint32_t stream_number = (((uint32_t)hdma->Instance & 0xFFU) - 16U) / 24U; + + /* lookup table for necessary bitshift of flags within status registers */ + static const uint8_t flagBitshiftOffset[8U] = {0U, 6U, 16U, 22U, 0U, 6U, 16U, 22U}; + hdma->StreamIndex = flagBitshiftOffset[stream_number]; + + if (stream_number > 3U) + { + /* return pointer to HISR and HIFCR */ + hdma->StreamBaseAddress = (((uint32_t)hdma->Instance & (uint32_t)(~0x3FFU)) + 4U); + } + else + { + /* return pointer to LISR and LIFCR */ + hdma->StreamBaseAddress = ((uint32_t)hdma->Instance & (uint32_t)(~0x3FFU)); + } + + return hdma->StreamBaseAddress; +} + +/** + * @brief Check compatibility between FIFO threshold level and size of the memory burst + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval HAL status + */ +static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmp = hdma->Init.FIFOThreshold; + + /* Memory Data size equal to Byte */ + if(hdma->Init.MemDataAlignment == DMA_MDATAALIGN_BYTE) + { + switch (tmp) + { + case DMA_FIFO_THRESHOLD_1QUARTERFULL: + case DMA_FIFO_THRESHOLD_3QUARTERSFULL: + if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1) + { + status = HAL_ERROR; + } + break; + case DMA_FIFO_THRESHOLD_HALFFULL: + if (hdma->Init.MemBurst == DMA_MBURST_INC16) + { + status = HAL_ERROR; + } + break; + case DMA_FIFO_THRESHOLD_FULL: + break; + default: + break; + } + } + + /* Memory Data size equal to Half-Word */ + else if (hdma->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) + { + switch (tmp) + { + case DMA_FIFO_THRESHOLD_1QUARTERFULL: + case DMA_FIFO_THRESHOLD_3QUARTERSFULL: + status = HAL_ERROR; + break; + case DMA_FIFO_THRESHOLD_HALFFULL: + if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1) + { + status = HAL_ERROR; + } + break; + case DMA_FIFO_THRESHOLD_FULL: + if (hdma->Init.MemBurst == DMA_MBURST_INC16) + { + status = HAL_ERROR; + } + break; + default: + break; + } + } + + /* Memory Data size equal to Word */ + else + { + switch (tmp) + { + case DMA_FIFO_THRESHOLD_1QUARTERFULL: + case DMA_FIFO_THRESHOLD_HALFFULL: + case DMA_FIFO_THRESHOLD_3QUARTERSFULL: + status = HAL_ERROR; + break; + case DMA_FIFO_THRESHOLD_FULL: + if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1) + { + status = HAL_ERROR; + } + break; + default: + break; + } + } + + return status; +} + +/** + * @} + */ + +#endif /* HAL_DMA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/stm32f4xx_hal_dma.h b/libs/hal/stm32f4xx_hal_dma.h similarity index 97% rename from Drivers/stm32f4xx_hal_dma.h rename to libs/hal/stm32f4xx_hal_dma.h index 336b2bb..7ff3836 100644 --- a/Drivers/stm32f4xx_hal_dma.h +++ b/libs/hal/stm32f4xx_hal_dma.h @@ -1,802 +1,802 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dma.h - * @author MCD Application Team - * @brief Header file of DMA HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_DMA_H -#define __STM32F4xx_HAL_DMA_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup DMA - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup DMA_Exported_Types DMA Exported Types - * @brief DMA Exported Types - * @{ - */ - -/** - * @brief DMA Configuration Structure definition - */ -typedef struct -{ - uint32_t Channel; /*!< Specifies the channel used for the specified stream. - This parameter can be a value of @ref DMA_Channel_selection */ - - uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, - from memory to memory or from peripheral to memory. - This parameter can be a value of @ref DMA_Data_transfer_direction */ - - uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not. - This parameter can be a value of @ref DMA_Peripheral_incremented_mode */ - - uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not. - This parameter can be a value of @ref DMA_Memory_incremented_mode */ - - uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width. - This parameter can be a value of @ref DMA_Peripheral_data_size */ - - uint32_t MemDataAlignment; /*!< Specifies the Memory data width. - This parameter can be a value of @ref DMA_Memory_data_size */ - - uint32_t Mode; /*!< Specifies the operation mode of the DMAy Streamx. - This parameter can be a value of @ref DMA_mode - @note The circular buffer mode cannot be used if the memory-to-memory - data transfer is configured on the selected Stream */ - - uint32_t Priority; /*!< Specifies the software priority for the DMAy Streamx. - This parameter can be a value of @ref DMA_Priority_level */ - - uint32_t FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream. - This parameter can be a value of @ref DMA_FIFO_direct_mode - @note The Direct mode (FIFO mode disabled) cannot be used if the - memory-to-memory data transfer is configured on the selected stream */ - - uint32_t FIFOThreshold; /*!< Specifies the FIFO threshold level. - This parameter can be a value of @ref DMA_FIFO_threshold_level */ - - uint32_t MemBurst; /*!< Specifies the Burst transfer configuration for the memory transfers. - It specifies the amount of data to be transferred in a single non interruptible - transaction. - This parameter can be a value of @ref DMA_Memory_burst - @note The burst mode is possible only if the address Increment mode is enabled. */ - - uint32_t PeriphBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers. - It specifies the amount of data to be transferred in a single non interruptible - transaction. - This parameter can be a value of @ref DMA_Peripheral_burst - @note The burst mode is possible only if the address Increment mode is enabled. */ -}DMA_InitTypeDef; - - -/** - * @brief HAL DMA State structures definition - */ -typedef enum -{ - HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */ - HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */ - HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */ - HAL_DMA_STATE_TIMEOUT = 0x03U, /*!< DMA timeout state */ - HAL_DMA_STATE_ERROR = 0x04U, /*!< DMA error state */ - HAL_DMA_STATE_ABORT = 0x05U, /*!< DMA Abort state */ -}HAL_DMA_StateTypeDef; - -/** - * @brief HAL DMA Error Code structure definition - */ -typedef enum -{ - HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */ - HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */ -}HAL_DMA_LevelCompleteTypeDef; - -/** - * @brief HAL DMA Error Code structure definition - */ -typedef enum -{ - HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */ - HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half Transfer */ - HAL_DMA_XFER_M1CPLT_CB_ID = 0x02U, /*!< M1 Full Transfer */ - HAL_DMA_XFER_M1HALFCPLT_CB_ID = 0x03U, /*!< M1 Half Transfer */ - HAL_DMA_XFER_ERROR_CB_ID = 0x04U, /*!< Error */ - HAL_DMA_XFER_ABORT_CB_ID = 0x05U, /*!< Abort */ - HAL_DMA_XFER_ALL_CB_ID = 0x06U /*!< All */ -}HAL_DMA_CallbackIDTypeDef; - -/** - * @brief DMA handle Structure definition - */ -typedef struct __DMA_HandleTypeDef -{ - DMA_Stream_TypeDef *Instance; /*!< Register base address */ - - DMA_InitTypeDef Init; /*!< DMA communication parameters */ - - HAL_LockTypeDef Lock; /*!< DMA locking object */ - - __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ - - void *Parent; /*!< Parent object state */ - - void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */ - - void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */ - - void (* XferM1CpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete Memory1 callback */ - - void (* XferM1HalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Half complete Memory1 callback */ - - void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */ - - void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Abort callback */ - - __IO uint32_t ErrorCode; /*!< DMA Error code */ - - uint32_t StreamBaseAddress; /*!< DMA Stream Base Address */ - - uint32_t StreamIndex; /*!< DMA Stream Index */ - -}DMA_HandleTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup DMA_Exported_Constants DMA Exported Constants - * @brief DMA Exported constants - * @{ - */ - -/** @defgroup DMA_Error_Code DMA Error Code - * @brief DMA Error Code - * @{ - */ -#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */ -#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */ -#define HAL_DMA_ERROR_FE 0x00000002U /*!< FIFO error */ -#define HAL_DMA_ERROR_DME 0x00000004U /*!< Direct Mode error */ -#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */ -#define HAL_DMA_ERROR_PARAM 0x00000040U /*!< Parameter error */ -#define HAL_DMA_ERROR_NO_XFER 0x00000080U /*!< Abort requested with no Xfer ongoing */ -#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */ -/** - * @} - */ - -/** @defgroup DMA_Channel_selection DMA Channel selection - * @brief DMA channel selection - * @{ - */ -#define DMA_CHANNEL_0 0x00000000U /*!< DMA Channel 0 */ -#define DMA_CHANNEL_1 0x02000000U /*!< DMA Channel 1 */ -#define DMA_CHANNEL_2 0x04000000U /*!< DMA Channel 2 */ -#define DMA_CHANNEL_3 0x06000000U /*!< DMA Channel 3 */ -#define DMA_CHANNEL_4 0x08000000U /*!< DMA Channel 4 */ -#define DMA_CHANNEL_5 0x0A000000U /*!< DMA Channel 5 */ -#define DMA_CHANNEL_6 0x0C000000U /*!< DMA Channel 6 */ -#define DMA_CHANNEL_7 0x0E000000U /*!< DMA Channel 7 */ -#if defined (DMA_SxCR_CHSEL_3) -#define DMA_CHANNEL_8 0x10000000U /*!< DMA Channel 8 */ -#define DMA_CHANNEL_9 0x12000000U /*!< DMA Channel 9 */ -#define DMA_CHANNEL_10 0x14000000U /*!< DMA Channel 10 */ -#define DMA_CHANNEL_11 0x16000000U /*!< DMA Channel 11 */ -#define DMA_CHANNEL_12 0x18000000U /*!< DMA Channel 12 */ -#define DMA_CHANNEL_13 0x1A000000U /*!< DMA Channel 13 */ -#define DMA_CHANNEL_14 0x1C000000U /*!< DMA Channel 14 */ -#define DMA_CHANNEL_15 0x1E000000U /*!< DMA Channel 15 */ -#endif /* DMA_SxCR_CHSEL_3 */ -/** - * @} - */ - -/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction - * @brief DMA data transfer direction - * @{ - */ -#define DMA_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ -#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_SxCR_DIR_0) /*!< Memory to peripheral direction */ -#define DMA_MEMORY_TO_MEMORY ((uint32_t)DMA_SxCR_DIR_1) /*!< Memory to memory direction */ -/** - * @} - */ - -/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode - * @brief DMA peripheral incremented mode - * @{ - */ -#define DMA_PINC_ENABLE ((uint32_t)DMA_SxCR_PINC) /*!< Peripheral increment mode enable */ -#define DMA_PINC_DISABLE 0x00000000U /*!< Peripheral increment mode disable */ -/** - * @} - */ - -/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode - * @brief DMA memory incremented mode - * @{ - */ -#define DMA_MINC_ENABLE ((uint32_t)DMA_SxCR_MINC) /*!< Memory increment mode enable */ -#define DMA_MINC_DISABLE 0x00000000U /*!< Memory increment mode disable */ -/** - * @} - */ - -/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size - * @brief DMA peripheral data size - * @{ - */ -#define DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment: Byte */ -#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_PSIZE_0) /*!< Peripheral data alignment: HalfWord */ -#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_SxCR_PSIZE_1) /*!< Peripheral data alignment: Word */ -/** - * @} - */ - -/** @defgroup DMA_Memory_data_size DMA Memory data size - * @brief DMA memory data size - * @{ - */ -#define DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment: Byte */ -#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_MSIZE_0) /*!< Memory data alignment: HalfWord */ -#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_SxCR_MSIZE_1) /*!< Memory data alignment: Word */ -/** - * @} - */ - -/** @defgroup DMA_mode DMA mode - * @brief DMA mode - * @{ - */ -#define DMA_NORMAL 0x00000000U /*!< Normal mode */ -#define DMA_CIRCULAR ((uint32_t)DMA_SxCR_CIRC) /*!< Circular mode */ -#define DMA_PFCTRL ((uint32_t)DMA_SxCR_PFCTRL) /*!< Peripheral flow control mode */ -/** - * @} - */ - -/** @defgroup DMA_Priority_level DMA Priority level - * @brief DMA priority levels - * @{ - */ -#define DMA_PRIORITY_LOW 0x00000000U /*!< Priority level: Low */ -#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_SxCR_PL_0) /*!< Priority level: Medium */ -#define DMA_PRIORITY_HIGH ((uint32_t)DMA_SxCR_PL_1) /*!< Priority level: High */ -#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_SxCR_PL) /*!< Priority level: Very High */ -/** - * @} - */ - -/** @defgroup DMA_FIFO_direct_mode DMA FIFO direct mode - * @brief DMA FIFO direct mode - * @{ - */ -#define DMA_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */ -#define DMA_FIFOMODE_ENABLE ((uint32_t)DMA_SxFCR_DMDIS) /*!< FIFO mode enable */ -/** - * @} - */ - -/** @defgroup DMA_FIFO_threshold_level DMA FIFO threshold level - * @brief DMA FIFO level - * @{ - */ -#define DMA_FIFO_THRESHOLD_1QUARTERFULL 0x00000000U /*!< FIFO threshold 1 quart full configuration */ -#define DMA_FIFO_THRESHOLD_HALFFULL ((uint32_t)DMA_SxFCR_FTH_0) /*!< FIFO threshold half full configuration */ -#define DMA_FIFO_THRESHOLD_3QUARTERSFULL ((uint32_t)DMA_SxFCR_FTH_1) /*!< FIFO threshold 3 quarts full configuration */ -#define DMA_FIFO_THRESHOLD_FULL ((uint32_t)DMA_SxFCR_FTH) /*!< FIFO threshold full configuration */ -/** - * @} - */ - -/** @defgroup DMA_Memory_burst DMA Memory burst - * @brief DMA memory burst - * @{ - */ -#define DMA_MBURST_SINGLE 0x00000000U -#define DMA_MBURST_INC4 ((uint32_t)DMA_SxCR_MBURST_0) -#define DMA_MBURST_INC8 ((uint32_t)DMA_SxCR_MBURST_1) -#define DMA_MBURST_INC16 ((uint32_t)DMA_SxCR_MBURST) -/** - * @} - */ - -/** @defgroup DMA_Peripheral_burst DMA Peripheral burst - * @brief DMA peripheral burst - * @{ - */ -#define DMA_PBURST_SINGLE 0x00000000U -#define DMA_PBURST_INC4 ((uint32_t)DMA_SxCR_PBURST_0) -#define DMA_PBURST_INC8 ((uint32_t)DMA_SxCR_PBURST_1) -#define DMA_PBURST_INC16 ((uint32_t)DMA_SxCR_PBURST) -/** - * @} - */ - -/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions - * @brief DMA interrupts definition - * @{ - */ -#define DMA_IT_TC ((uint32_t)DMA_SxCR_TCIE) -#define DMA_IT_HT ((uint32_t)DMA_SxCR_HTIE) -#define DMA_IT_TE ((uint32_t)DMA_SxCR_TEIE) -#define DMA_IT_DME ((uint32_t)DMA_SxCR_DMEIE) -#define DMA_IT_FE 0x00000080U -/** - * @} - */ - -/** @defgroup DMA_flag_definitions DMA flag definitions - * @brief DMA flag definitions - * @{ - */ -#define DMA_FLAG_FEIF0_4 0x00000001U -#define DMA_FLAG_DMEIF0_4 0x00000004U -#define DMA_FLAG_TEIF0_4 0x00000008U -#define DMA_FLAG_HTIF0_4 0x00000010U -#define DMA_FLAG_TCIF0_4 0x00000020U -#define DMA_FLAG_FEIF1_5 0x00000040U -#define DMA_FLAG_DMEIF1_5 0x00000100U -#define DMA_FLAG_TEIF1_5 0x00000200U -#define DMA_FLAG_HTIF1_5 0x00000400U -#define DMA_FLAG_TCIF1_5 0x00000800U -#define DMA_FLAG_FEIF2_6 0x00010000U -#define DMA_FLAG_DMEIF2_6 0x00040000U -#define DMA_FLAG_TEIF2_6 0x00080000U -#define DMA_FLAG_HTIF2_6 0x00100000U -#define DMA_FLAG_TCIF2_6 0x00200000U -#define DMA_FLAG_FEIF3_7 0x00400000U -#define DMA_FLAG_DMEIF3_7 0x01000000U -#define DMA_FLAG_TEIF3_7 0x02000000U -#define DMA_FLAG_HTIF3_7 0x04000000U -#define DMA_FLAG_TCIF3_7 0x08000000U -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ - -/** @brief Reset DMA handle state - * @param __HANDLE__ specifies the DMA handle. - * @retval None - */ -#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET) - -/** - * @brief Return the current DMA Stream FIFO filled level. - * @param __HANDLE__ DMA handle - * @retval The FIFO filling state. - * - DMA_FIFOStatus_Less1QuarterFull: when FIFO is less than 1 quarter-full - * and not empty. - * - DMA_FIFOStatus_1QuarterFull: if more than 1 quarter-full. - * - DMA_FIFOStatus_HalfFull: if more than 1 half-full. - * - DMA_FIFOStatus_3QuartersFull: if more than 3 quarters-full. - * - DMA_FIFOStatus_Empty: when FIFO is empty - * - DMA_FIFOStatus_Full: when FIFO is full - */ -#define __HAL_DMA_GET_FS(__HANDLE__) (((__HANDLE__)->Instance->FCR & (DMA_SxFCR_FS))) - -/** - * @brief Enable the specified DMA Stream. - * @param __HANDLE__ DMA handle - * @retval None - */ -#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA_SxCR_EN) - -/** - * @brief Disable the specified DMA Stream. - * @param __HANDLE__ DMA handle - * @retval None - */ -#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~DMA_SxCR_EN) - -/* Interrupt & Flag management */ - -/** - * @brief Return the current DMA Stream transfer complete flag. - * @param __HANDLE__ DMA handle - * @retval The specified transfer complete flag index. - */ -#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TCIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TCIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TCIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TCIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TCIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TCIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TCIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TCIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TCIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TCIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TCIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TCIF2_6 :\ - DMA_FLAG_TCIF3_7) - -/** - * @brief Return the current DMA Stream half transfer complete flag. - * @param __HANDLE__ DMA handle - * @retval The specified half transfer complete flag index. - */ -#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_HTIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_HTIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_HTIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_HTIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_HTIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_HTIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_HTIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_HTIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_HTIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_HTIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_HTIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_HTIF2_6 :\ - DMA_FLAG_HTIF3_7) - -/** - * @brief Return the current DMA Stream transfer error flag. - * @param __HANDLE__ DMA handle - * @retval The specified transfer error flag index. - */ -#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TEIF2_6 :\ - DMA_FLAG_TEIF3_7) - -/** - * @brief Return the current DMA Stream FIFO error flag. - * @param __HANDLE__ DMA handle - * @retval The specified FIFO error flag index. - */ -#define __HAL_DMA_GET_FE_FLAG_INDEX(__HANDLE__)\ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_FEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_FEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_FEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_FEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_FEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_FEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_FEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_FEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_FEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_FEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_FEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_FEIF2_6 :\ - DMA_FLAG_FEIF3_7) - -/** - * @brief Return the current DMA Stream direct mode error flag. - * @param __HANDLE__ DMA handle - * @retval The specified direct mode error flag index. - */ -#define __HAL_DMA_GET_DME_FLAG_INDEX(__HANDLE__)\ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_DMEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_DMEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_DMEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_DMEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_DMEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_DMEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_DMEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_DMEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_DMEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_DMEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_DMEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_DMEIF2_6 :\ - DMA_FLAG_DMEIF3_7) - -/** - * @brief Get the DMA Stream pending flags. - * @param __HANDLE__ DMA handle - * @param __FLAG__ Get the specified flag. - * This parameter can be any combination of the following values: - * @arg DMA_FLAG_TCIFx: Transfer complete flag. - * @arg DMA_FLAG_HTIFx: Half transfer complete flag. - * @arg DMA_FLAG_TEIFx: Transfer error flag. - * @arg DMA_FLAG_DMEIFx: Direct mode error flag. - * @arg DMA_FLAG_FEIFx: FIFO error flag. - * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag. - * @retval The state of FLAG (SET or RESET). - */ -#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\ -(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HISR & (__FLAG__)) :\ - ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LISR & (__FLAG__)) :\ - ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HISR & (__FLAG__)) : (DMA1->LISR & (__FLAG__))) - -/** - * @brief Clear the DMA Stream pending flags. - * @param __HANDLE__ DMA handle - * @param __FLAG__ specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg DMA_FLAG_TCIFx: Transfer complete flag. - * @arg DMA_FLAG_HTIFx: Half transfer complete flag. - * @arg DMA_FLAG_TEIFx: Transfer error flag. - * @arg DMA_FLAG_DMEIFx: Direct mode error flag. - * @arg DMA_FLAG_FEIFx: FIFO error flag. - * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag. - * @retval None - */ -#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \ -(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HIFCR = (__FLAG__)) :\ - ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LIFCR = (__FLAG__)) :\ - ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HIFCR = (__FLAG__)) : (DMA1->LIFCR = (__FLAG__))) - -/** - * @brief Enable the specified DMA Stream interrupts. - * @param __HANDLE__ DMA handle - * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg DMA_IT_TC: Transfer complete interrupt mask. - * @arg DMA_IT_HT: Half transfer complete interrupt mask. - * @arg DMA_IT_TE: Transfer error interrupt mask. - * @arg DMA_IT_FE: FIFO error interrupt mask. - * @arg DMA_IT_DME: Direct mode error interrupt. - * @retval None - */ -#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \ -((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR |= (__INTERRUPT__))) - -/** - * @brief Disable the specified DMA Stream interrupts. - * @param __HANDLE__ DMA handle - * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg DMA_IT_TC: Transfer complete interrupt mask. - * @arg DMA_IT_HT: Half transfer complete interrupt mask. - * @arg DMA_IT_TE: Transfer error interrupt mask. - * @arg DMA_IT_FE: FIFO error interrupt mask. - * @arg DMA_IT_DME: Direct mode error interrupt. - * @retval None - */ -#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \ -((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR &= ~(__INTERRUPT__))) - -/** - * @brief Check whether the specified DMA Stream interrupt is enabled or disabled. - * @param __HANDLE__ DMA handle - * @param __INTERRUPT__ specifies the DMA interrupt source to check. - * This parameter can be one of the following values: - * @arg DMA_IT_TC: Transfer complete interrupt mask. - * @arg DMA_IT_HT: Half transfer complete interrupt mask. - * @arg DMA_IT_TE: Transfer error interrupt mask. - * @arg DMA_IT_FE: FIFO error interrupt mask. - * @arg DMA_IT_DME: Direct mode error interrupt. - * @retval The state of DMA_IT. - */ -#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \ - ((__HANDLE__)->Instance->CR & (__INTERRUPT__)) : \ - ((__HANDLE__)->Instance->FCR & (__INTERRUPT__))) - -/** - * @brief Writes the number of data units to be transferred on the DMA Stream. - * @param __HANDLE__ DMA handle - * @param __COUNTER__ Number of data units to be transferred (from 0 to 65535) - * Number of data items depends only on the Peripheral data format. - * - * @note If Peripheral data format is Bytes: number of data units is equal - * to total number of bytes to be transferred. - * - * @note If Peripheral data format is Half-Word: number of data units is - * equal to total number of bytes to be transferred / 2. - * - * @note If Peripheral data format is Word: number of data units is equal - * to total number of bytes to be transferred / 4. - * - * @retval The number of remaining data units in the current DMAy Streamx transfer. - */ -#define __HAL_DMA_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->NDTR = (uint16_t)(__COUNTER__)) - -/** - * @brief Returns the number of remaining data units in the current DMAy Streamx transfer. - * @param __HANDLE__ DMA handle - * - * @retval The number of remaining data units in the current DMA Stream transfer. - */ -#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->NDTR) - - -/* Include DMA HAL Extension module */ -#include "stm32f4xx_hal_dma_ex.h" - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup DMA_Exported_Functions DMA Exported Functions - * @brief DMA Exported functions - * @{ - */ - -/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and de-initialization functions - * @{ - */ -HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma); -/** - * @} - */ - -/** @defgroup DMA_Exported_Functions_Group2 I/O operation functions - * @brief I/O operation functions - * @{ - */ -HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); -HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); -HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout); -void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_CleanCallbacks(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)); -HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID); - -/** - * @} - */ - -/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions - * @brief Peripheral State functions - * @{ - */ -HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma); -uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); -/** - * @} - */ -/** - * @} - */ -/* Private Constants -------------------------------------------------------------*/ -/** @defgroup DMA_Private_Constants DMA Private Constants - * @brief DMA private defines and constants - * @{ - */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup DMA_Private_Macros DMA Private Macros - * @brief DMA private macros - * @{ - */ -#if defined (DMA_SxCR_CHSEL_3) -#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \ - ((CHANNEL) == DMA_CHANNEL_1) || \ - ((CHANNEL) == DMA_CHANNEL_2) || \ - ((CHANNEL) == DMA_CHANNEL_3) || \ - ((CHANNEL) == DMA_CHANNEL_4) || \ - ((CHANNEL) == DMA_CHANNEL_5) || \ - ((CHANNEL) == DMA_CHANNEL_6) || \ - ((CHANNEL) == DMA_CHANNEL_7) || \ - ((CHANNEL) == DMA_CHANNEL_8) || \ - ((CHANNEL) == DMA_CHANNEL_9) || \ - ((CHANNEL) == DMA_CHANNEL_10)|| \ - ((CHANNEL) == DMA_CHANNEL_11)|| \ - ((CHANNEL) == DMA_CHANNEL_12)|| \ - ((CHANNEL) == DMA_CHANNEL_13)|| \ - ((CHANNEL) == DMA_CHANNEL_14)|| \ - ((CHANNEL) == DMA_CHANNEL_15)) -#else -#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \ - ((CHANNEL) == DMA_CHANNEL_1) || \ - ((CHANNEL) == DMA_CHANNEL_2) || \ - ((CHANNEL) == DMA_CHANNEL_3) || \ - ((CHANNEL) == DMA_CHANNEL_4) || \ - ((CHANNEL) == DMA_CHANNEL_5) || \ - ((CHANNEL) == DMA_CHANNEL_6) || \ - ((CHANNEL) == DMA_CHANNEL_7)) -#endif /* DMA_SxCR_CHSEL_3 */ - -#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \ - ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ - ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) - -#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x01U) && ((SIZE) < 0x10000U)) - -#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \ - ((STATE) == DMA_PINC_DISABLE)) - -#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \ - ((STATE) == DMA_MINC_DISABLE)) - -#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \ - ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \ - ((SIZE) == DMA_PDATAALIGN_WORD)) - -#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \ - ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \ - ((SIZE) == DMA_MDATAALIGN_WORD )) - -#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \ - ((MODE) == DMA_CIRCULAR) || \ - ((MODE) == DMA_PFCTRL)) - -#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \ - ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \ - ((PRIORITY) == DMA_PRIORITY_HIGH) || \ - ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) - -#define IS_DMA_FIFO_MODE_STATE(STATE) (((STATE) == DMA_FIFOMODE_DISABLE ) || \ - ((STATE) == DMA_FIFOMODE_ENABLE)) - -#define IS_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == DMA_FIFO_THRESHOLD_1QUARTERFULL ) || \ - ((THRESHOLD) == DMA_FIFO_THRESHOLD_HALFFULL) || \ - ((THRESHOLD) == DMA_FIFO_THRESHOLD_3QUARTERSFULL) || \ - ((THRESHOLD) == DMA_FIFO_THRESHOLD_FULL)) - -#define IS_DMA_MEMORY_BURST(BURST) (((BURST) == DMA_MBURST_SINGLE) || \ - ((BURST) == DMA_MBURST_INC4) || \ - ((BURST) == DMA_MBURST_INC8) || \ - ((BURST) == DMA_MBURST_INC16)) - -#define IS_DMA_PERIPHERAL_BURST(BURST) (((BURST) == DMA_PBURST_SINGLE) || \ - ((BURST) == DMA_PBURST_INC4) || \ - ((BURST) == DMA_PBURST_INC8) || \ - ((BURST) == DMA_PBURST_INC16)) -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup DMA_Private_Functions DMA Private Functions - * @brief DMA private functions - * @{ - */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_DMA_H */ - +/** + ****************************************************************************** + * @file stm32f4xx_hal_dma.h + * @author MCD Application Team + * @brief Header file of DMA HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_DMA_H +#define __STM32F4xx_HAL_DMA_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup DMA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Types DMA Exported Types + * @brief DMA Exported Types + * @{ + */ + +/** + * @brief DMA Configuration Structure definition + */ +typedef struct +{ + uint32_t Channel; /*!< Specifies the channel used for the specified stream. + This parameter can be a value of @ref DMA_Channel_selection */ + + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_Data_transfer_direction */ + + uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not. + This parameter can be a value of @ref DMA_Peripheral_incremented_mode */ + + uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not. + This parameter can be a value of @ref DMA_Memory_incremented_mode */ + + uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width. + This parameter can be a value of @ref DMA_Peripheral_data_size */ + + uint32_t MemDataAlignment; /*!< Specifies the Memory data width. + This parameter can be a value of @ref DMA_Memory_data_size */ + + uint32_t Mode; /*!< Specifies the operation mode of the DMAy Streamx. + This parameter can be a value of @ref DMA_mode + @note The circular buffer mode cannot be used if the memory-to-memory + data transfer is configured on the selected Stream */ + + uint32_t Priority; /*!< Specifies the software priority for the DMAy Streamx. + This parameter can be a value of @ref DMA_Priority_level */ + + uint32_t FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream. + This parameter can be a value of @ref DMA_FIFO_direct_mode + @note The Direct mode (FIFO mode disabled) cannot be used if the + memory-to-memory data transfer is configured on the selected stream */ + + uint32_t FIFOThreshold; /*!< Specifies the FIFO threshold level. + This parameter can be a value of @ref DMA_FIFO_threshold_level */ + + uint32_t MemBurst; /*!< Specifies the Burst transfer configuration for the memory transfers. + It specifies the amount of data to be transferred in a single non interruptible + transaction. + This parameter can be a value of @ref DMA_Memory_burst + @note The burst mode is possible only if the address Increment mode is enabled. */ + + uint32_t PeriphBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers. + It specifies the amount of data to be transferred in a single non interruptible + transaction. + This parameter can be a value of @ref DMA_Peripheral_burst + @note The burst mode is possible only if the address Increment mode is enabled. */ +}DMA_InitTypeDef; + + +/** + * @brief HAL DMA State structures definition + */ +typedef enum +{ + HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */ + HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */ + HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */ + HAL_DMA_STATE_TIMEOUT = 0x03U, /*!< DMA timeout state */ + HAL_DMA_STATE_ERROR = 0x04U, /*!< DMA error state */ + HAL_DMA_STATE_ABORT = 0x05U, /*!< DMA Abort state */ +}HAL_DMA_StateTypeDef; + +/** + * @brief HAL DMA Error Code structure definition + */ +typedef enum +{ + HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */ + HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */ +}HAL_DMA_LevelCompleteTypeDef; + +/** + * @brief HAL DMA Error Code structure definition + */ +typedef enum +{ + HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */ + HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half Transfer */ + HAL_DMA_XFER_M1CPLT_CB_ID = 0x02U, /*!< M1 Full Transfer */ + HAL_DMA_XFER_M1HALFCPLT_CB_ID = 0x03U, /*!< M1 Half Transfer */ + HAL_DMA_XFER_ERROR_CB_ID = 0x04U, /*!< Error */ + HAL_DMA_XFER_ABORT_CB_ID = 0x05U, /*!< Abort */ + HAL_DMA_XFER_ALL_CB_ID = 0x06U /*!< All */ +}HAL_DMA_CallbackIDTypeDef; + +/** + * @brief DMA handle Structure definition + */ +typedef struct __DMA_HandleTypeDef +{ + DMA_Stream_TypeDef *Instance; /*!< Register base address */ + + DMA_InitTypeDef Init; /*!< DMA communication parameters */ + + HAL_LockTypeDef Lock; /*!< DMA locking object */ + + __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ + + void *Parent; /*!< Parent object state */ + + void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */ + + void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */ + + void (* XferM1CpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete Memory1 callback */ + + void (* XferM1HalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Half complete Memory1 callback */ + + void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */ + + void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Abort callback */ + + __IO uint32_t ErrorCode; /*!< DMA Error code */ + + uint32_t StreamBaseAddress; /*!< DMA Stream Base Address */ + + uint32_t StreamIndex; /*!< DMA Stream Index */ + +}DMA_HandleTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Constants DMA Exported Constants + * @brief DMA Exported constants + * @{ + */ + +/** @defgroup DMA_Error_Code DMA Error Code + * @brief DMA Error Code + * @{ + */ +#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */ +#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */ +#define HAL_DMA_ERROR_FE 0x00000002U /*!< FIFO error */ +#define HAL_DMA_ERROR_DME 0x00000004U /*!< Direct Mode error */ +#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */ +#define HAL_DMA_ERROR_PARAM 0x00000040U /*!< Parameter error */ +#define HAL_DMA_ERROR_NO_XFER 0x00000080U /*!< Abort requested with no Xfer ongoing */ +#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */ +/** + * @} + */ + +/** @defgroup DMA_Channel_selection DMA Channel selection + * @brief DMA channel selection + * @{ + */ +#define DMA_CHANNEL_0 0x00000000U /*!< DMA Channel 0 */ +#define DMA_CHANNEL_1 0x02000000U /*!< DMA Channel 1 */ +#define DMA_CHANNEL_2 0x04000000U /*!< DMA Channel 2 */ +#define DMA_CHANNEL_3 0x06000000U /*!< DMA Channel 3 */ +#define DMA_CHANNEL_4 0x08000000U /*!< DMA Channel 4 */ +#define DMA_CHANNEL_5 0x0A000000U /*!< DMA Channel 5 */ +#define DMA_CHANNEL_6 0x0C000000U /*!< DMA Channel 6 */ +#define DMA_CHANNEL_7 0x0E000000U /*!< DMA Channel 7 */ +#if defined (DMA_SxCR_CHSEL_3) +#define DMA_CHANNEL_8 0x10000000U /*!< DMA Channel 8 */ +#define DMA_CHANNEL_9 0x12000000U /*!< DMA Channel 9 */ +#define DMA_CHANNEL_10 0x14000000U /*!< DMA Channel 10 */ +#define DMA_CHANNEL_11 0x16000000U /*!< DMA Channel 11 */ +#define DMA_CHANNEL_12 0x18000000U /*!< DMA Channel 12 */ +#define DMA_CHANNEL_13 0x1A000000U /*!< DMA Channel 13 */ +#define DMA_CHANNEL_14 0x1C000000U /*!< DMA Channel 14 */ +#define DMA_CHANNEL_15 0x1E000000U /*!< DMA Channel 15 */ +#endif /* DMA_SxCR_CHSEL_3 */ +/** + * @} + */ + +/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction + * @brief DMA data transfer direction + * @{ + */ +#define DMA_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ +#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_SxCR_DIR_0) /*!< Memory to peripheral direction */ +#define DMA_MEMORY_TO_MEMORY ((uint32_t)DMA_SxCR_DIR_1) /*!< Memory to memory direction */ +/** + * @} + */ + +/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode + * @brief DMA peripheral incremented mode + * @{ + */ +#define DMA_PINC_ENABLE ((uint32_t)DMA_SxCR_PINC) /*!< Peripheral increment mode enable */ +#define DMA_PINC_DISABLE 0x00000000U /*!< Peripheral increment mode disable */ +/** + * @} + */ + +/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode + * @brief DMA memory incremented mode + * @{ + */ +#define DMA_MINC_ENABLE ((uint32_t)DMA_SxCR_MINC) /*!< Memory increment mode enable */ +#define DMA_MINC_DISABLE 0x00000000U /*!< Memory increment mode disable */ +/** + * @} + */ + +/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size + * @brief DMA peripheral data size + * @{ + */ +#define DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment: Byte */ +#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_PSIZE_0) /*!< Peripheral data alignment: HalfWord */ +#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_SxCR_PSIZE_1) /*!< Peripheral data alignment: Word */ +/** + * @} + */ + +/** @defgroup DMA_Memory_data_size DMA Memory data size + * @brief DMA memory data size + * @{ + */ +#define DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment: Byte */ +#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_MSIZE_0) /*!< Memory data alignment: HalfWord */ +#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_SxCR_MSIZE_1) /*!< Memory data alignment: Word */ +/** + * @} + */ + +/** @defgroup DMA_mode DMA mode + * @brief DMA mode + * @{ + */ +#define DMA_NORMAL 0x00000000U /*!< Normal mode */ +#define DMA_CIRCULAR ((uint32_t)DMA_SxCR_CIRC) /*!< Circular mode */ +#define DMA_PFCTRL ((uint32_t)DMA_SxCR_PFCTRL) /*!< Peripheral flow control mode */ +/** + * @} + */ + +/** @defgroup DMA_Priority_level DMA Priority level + * @brief DMA priority levels + * @{ + */ +#define DMA_PRIORITY_LOW 0x00000000U /*!< Priority level: Low */ +#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_SxCR_PL_0) /*!< Priority level: Medium */ +#define DMA_PRIORITY_HIGH ((uint32_t)DMA_SxCR_PL_1) /*!< Priority level: High */ +#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_SxCR_PL) /*!< Priority level: Very High */ +/** + * @} + */ + +/** @defgroup DMA_FIFO_direct_mode DMA FIFO direct mode + * @brief DMA FIFO direct mode + * @{ + */ +#define DMA_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */ +#define DMA_FIFOMODE_ENABLE ((uint32_t)DMA_SxFCR_DMDIS) /*!< FIFO mode enable */ +/** + * @} + */ + +/** @defgroup DMA_FIFO_threshold_level DMA FIFO threshold level + * @brief DMA FIFO level + * @{ + */ +#define DMA_FIFO_THRESHOLD_1QUARTERFULL 0x00000000U /*!< FIFO threshold 1 quart full configuration */ +#define DMA_FIFO_THRESHOLD_HALFFULL ((uint32_t)DMA_SxFCR_FTH_0) /*!< FIFO threshold half full configuration */ +#define DMA_FIFO_THRESHOLD_3QUARTERSFULL ((uint32_t)DMA_SxFCR_FTH_1) /*!< FIFO threshold 3 quarts full configuration */ +#define DMA_FIFO_THRESHOLD_FULL ((uint32_t)DMA_SxFCR_FTH) /*!< FIFO threshold full configuration */ +/** + * @} + */ + +/** @defgroup DMA_Memory_burst DMA Memory burst + * @brief DMA memory burst + * @{ + */ +#define DMA_MBURST_SINGLE 0x00000000U +#define DMA_MBURST_INC4 ((uint32_t)DMA_SxCR_MBURST_0) +#define DMA_MBURST_INC8 ((uint32_t)DMA_SxCR_MBURST_1) +#define DMA_MBURST_INC16 ((uint32_t)DMA_SxCR_MBURST) +/** + * @} + */ + +/** @defgroup DMA_Peripheral_burst DMA Peripheral burst + * @brief DMA peripheral burst + * @{ + */ +#define DMA_PBURST_SINGLE 0x00000000U +#define DMA_PBURST_INC4 ((uint32_t)DMA_SxCR_PBURST_0) +#define DMA_PBURST_INC8 ((uint32_t)DMA_SxCR_PBURST_1) +#define DMA_PBURST_INC16 ((uint32_t)DMA_SxCR_PBURST) +/** + * @} + */ + +/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions + * @brief DMA interrupts definition + * @{ + */ +#define DMA_IT_TC ((uint32_t)DMA_SxCR_TCIE) +#define DMA_IT_HT ((uint32_t)DMA_SxCR_HTIE) +#define DMA_IT_TE ((uint32_t)DMA_SxCR_TEIE) +#define DMA_IT_DME ((uint32_t)DMA_SxCR_DMEIE) +#define DMA_IT_FE 0x00000080U +/** + * @} + */ + +/** @defgroup DMA_flag_definitions DMA flag definitions + * @brief DMA flag definitions + * @{ + */ +#define DMA_FLAG_FEIF0_4 0x00000001U +#define DMA_FLAG_DMEIF0_4 0x00000004U +#define DMA_FLAG_TEIF0_4 0x00000008U +#define DMA_FLAG_HTIF0_4 0x00000010U +#define DMA_FLAG_TCIF0_4 0x00000020U +#define DMA_FLAG_FEIF1_5 0x00000040U +#define DMA_FLAG_DMEIF1_5 0x00000100U +#define DMA_FLAG_TEIF1_5 0x00000200U +#define DMA_FLAG_HTIF1_5 0x00000400U +#define DMA_FLAG_TCIF1_5 0x00000800U +#define DMA_FLAG_FEIF2_6 0x00010000U +#define DMA_FLAG_DMEIF2_6 0x00040000U +#define DMA_FLAG_TEIF2_6 0x00080000U +#define DMA_FLAG_HTIF2_6 0x00100000U +#define DMA_FLAG_TCIF2_6 0x00200000U +#define DMA_FLAG_FEIF3_7 0x00400000U +#define DMA_FLAG_DMEIF3_7 0x01000000U +#define DMA_FLAG_TEIF3_7 0x02000000U +#define DMA_FLAG_HTIF3_7 0x04000000U +#define DMA_FLAG_TCIF3_7 0x08000000U +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @brief Reset DMA handle state + * @param __HANDLE__ specifies the DMA handle. + * @retval None + */ +#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET) + +/** + * @brief Return the current DMA Stream FIFO filled level. + * @param __HANDLE__ DMA handle + * @retval The FIFO filling state. + * - DMA_FIFOStatus_Less1QuarterFull: when FIFO is less than 1 quarter-full + * and not empty. + * - DMA_FIFOStatus_1QuarterFull: if more than 1 quarter-full. + * - DMA_FIFOStatus_HalfFull: if more than 1 half-full. + * - DMA_FIFOStatus_3QuartersFull: if more than 3 quarters-full. + * - DMA_FIFOStatus_Empty: when FIFO is empty + * - DMA_FIFOStatus_Full: when FIFO is full + */ +#define __HAL_DMA_GET_FS(__HANDLE__) (((__HANDLE__)->Instance->FCR & (DMA_SxFCR_FS))) + +/** + * @brief Enable the specified DMA Stream. + * @param __HANDLE__ DMA handle + * @retval None + */ +#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA_SxCR_EN) + +/** + * @brief Disable the specified DMA Stream. + * @param __HANDLE__ DMA handle + * @retval None + */ +#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~DMA_SxCR_EN) + +/* Interrupt & Flag management */ + +/** + * @brief Return the current DMA Stream transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer complete flag index. + */ +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TCIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TCIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TCIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TCIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TCIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TCIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TCIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TCIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TCIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TCIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TCIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TCIF2_6 :\ + DMA_FLAG_TCIF3_7) + +/** + * @brief Return the current DMA Stream half transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified half transfer complete flag index. + */ +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_HTIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_HTIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_HTIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_HTIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_HTIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_HTIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_HTIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_HTIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_HTIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_HTIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_HTIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_HTIF2_6 :\ + DMA_FLAG_HTIF3_7) + +/** + * @brief Return the current DMA Stream transfer error flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TEIF2_6 :\ + DMA_FLAG_TEIF3_7) + +/** + * @brief Return the current DMA Stream FIFO error flag. + * @param __HANDLE__ DMA handle + * @retval The specified FIFO error flag index. + */ +#define __HAL_DMA_GET_FE_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_FEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_FEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_FEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_FEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_FEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_FEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_FEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_FEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_FEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_FEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_FEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_FEIF2_6 :\ + DMA_FLAG_FEIF3_7) + +/** + * @brief Return the current DMA Stream direct mode error flag. + * @param __HANDLE__ DMA handle + * @retval The specified direct mode error flag index. + */ +#define __HAL_DMA_GET_DME_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_DMEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_DMEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_DMEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_DMEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_DMEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_DMEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_DMEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_DMEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_DMEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_DMEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_DMEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_DMEIF2_6 :\ + DMA_FLAG_DMEIF3_7) + +/** + * @brief Get the DMA Stream pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ Get the specified flag. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCIFx: Transfer complete flag. + * @arg DMA_FLAG_HTIFx: Half transfer complete flag. + * @arg DMA_FLAG_TEIFx: Transfer error flag. + * @arg DMA_FLAG_DMEIFx: Direct mode error flag. + * @arg DMA_FLAG_FEIFx: FIFO error flag. + * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag. + * @retval The state of FLAG (SET or RESET). + */ +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\ +(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HISR & (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LISR & (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HISR & (__FLAG__)) : (DMA1->LISR & (__FLAG__))) + +/** + * @brief Clear the DMA Stream pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCIFx: Transfer complete flag. + * @arg DMA_FLAG_HTIFx: Half transfer complete flag. + * @arg DMA_FLAG_TEIFx: Transfer error flag. + * @arg DMA_FLAG_DMEIFx: Direct mode error flag. + * @arg DMA_FLAG_FEIFx: FIFO error flag. + * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag. + * @retval None + */ +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \ +(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HIFCR = (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LIFCR = (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HIFCR = (__FLAG__)) : (DMA1->LIFCR = (__FLAG__))) + +/** + * @brief Enable the specified DMA Stream interrupts. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask. + * @arg DMA_IT_HT: Half transfer complete interrupt mask. + * @arg DMA_IT_TE: Transfer error interrupt mask. + * @arg DMA_IT_FE: FIFO error interrupt mask. + * @arg DMA_IT_DME: Direct mode error interrupt. + * @retval None + */ +#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \ +((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR |= (__INTERRUPT__))) + +/** + * @brief Disable the specified DMA Stream interrupts. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask. + * @arg DMA_IT_HT: Half transfer complete interrupt mask. + * @arg DMA_IT_TE: Transfer error interrupt mask. + * @arg DMA_IT_FE: FIFO error interrupt mask. + * @arg DMA_IT_DME: Direct mode error interrupt. + * @retval None + */ +#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \ +((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR &= ~(__INTERRUPT__))) + +/** + * @brief Check whether the specified DMA Stream interrupt is enabled or disabled. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt source to check. + * This parameter can be one of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask. + * @arg DMA_IT_HT: Half transfer complete interrupt mask. + * @arg DMA_IT_TE: Transfer error interrupt mask. + * @arg DMA_IT_FE: FIFO error interrupt mask. + * @arg DMA_IT_DME: Direct mode error interrupt. + * @retval The state of DMA_IT. + */ +#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \ + ((__HANDLE__)->Instance->CR & (__INTERRUPT__)) : \ + ((__HANDLE__)->Instance->FCR & (__INTERRUPT__))) + +/** + * @brief Writes the number of data units to be transferred on the DMA Stream. + * @param __HANDLE__ DMA handle + * @param __COUNTER__ Number of data units to be transferred (from 0 to 65535) + * Number of data items depends only on the Peripheral data format. + * + * @note If Peripheral data format is Bytes: number of data units is equal + * to total number of bytes to be transferred. + * + * @note If Peripheral data format is Half-Word: number of data units is + * equal to total number of bytes to be transferred / 2. + * + * @note If Peripheral data format is Word: number of data units is equal + * to total number of bytes to be transferred / 4. + * + * @retval The number of remaining data units in the current DMAy Streamx transfer. + */ +#define __HAL_DMA_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->NDTR = (uint16_t)(__COUNTER__)) + +/** + * @brief Returns the number of remaining data units in the current DMAy Streamx transfer. + * @param __HANDLE__ DMA handle + * + * @retval The number of remaining data units in the current DMA Stream transfer. + */ +#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->NDTR) + + +/* Include DMA HAL Extension module */ +#include "stm32f4xx_hal_dma_ex.h" + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Functions DMA Exported Functions + * @brief DMA Exported functions + * @{ + */ + +/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions_Group2 I/O operation functions + * @brief I/O operation functions + * @{ + */ +HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout); +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_CleanCallbacks(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)); +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID); + +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions + * @brief Peripheral State functions + * @{ + */ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma); +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); +/** + * @} + */ +/** + * @} + */ +/* Private Constants -------------------------------------------------------------*/ +/** @defgroup DMA_Private_Constants DMA Private Constants + * @brief DMA private defines and constants + * @{ + */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DMA_Private_Macros DMA Private Macros + * @brief DMA private macros + * @{ + */ +#if defined (DMA_SxCR_CHSEL_3) +#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \ + ((CHANNEL) == DMA_CHANNEL_1) || \ + ((CHANNEL) == DMA_CHANNEL_2) || \ + ((CHANNEL) == DMA_CHANNEL_3) || \ + ((CHANNEL) == DMA_CHANNEL_4) || \ + ((CHANNEL) == DMA_CHANNEL_5) || \ + ((CHANNEL) == DMA_CHANNEL_6) || \ + ((CHANNEL) == DMA_CHANNEL_7) || \ + ((CHANNEL) == DMA_CHANNEL_8) || \ + ((CHANNEL) == DMA_CHANNEL_9) || \ + ((CHANNEL) == DMA_CHANNEL_10)|| \ + ((CHANNEL) == DMA_CHANNEL_11)|| \ + ((CHANNEL) == DMA_CHANNEL_12)|| \ + ((CHANNEL) == DMA_CHANNEL_13)|| \ + ((CHANNEL) == DMA_CHANNEL_14)|| \ + ((CHANNEL) == DMA_CHANNEL_15)) +#else +#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \ + ((CHANNEL) == DMA_CHANNEL_1) || \ + ((CHANNEL) == DMA_CHANNEL_2) || \ + ((CHANNEL) == DMA_CHANNEL_3) || \ + ((CHANNEL) == DMA_CHANNEL_4) || \ + ((CHANNEL) == DMA_CHANNEL_5) || \ + ((CHANNEL) == DMA_CHANNEL_6) || \ + ((CHANNEL) == DMA_CHANNEL_7)) +#endif /* DMA_SxCR_CHSEL_3 */ + +#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \ + ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ + ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) + +#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x01U) && ((SIZE) < 0x10000U)) + +#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \ + ((STATE) == DMA_PINC_DISABLE)) + +#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \ + ((STATE) == DMA_MINC_DISABLE)) + +#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \ + ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_PDATAALIGN_WORD)) + +#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \ + ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_MDATAALIGN_WORD )) + +#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \ + ((MODE) == DMA_CIRCULAR) || \ + ((MODE) == DMA_PFCTRL)) + +#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \ + ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \ + ((PRIORITY) == DMA_PRIORITY_HIGH) || \ + ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) + +#define IS_DMA_FIFO_MODE_STATE(STATE) (((STATE) == DMA_FIFOMODE_DISABLE ) || \ + ((STATE) == DMA_FIFOMODE_ENABLE)) + +#define IS_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == DMA_FIFO_THRESHOLD_1QUARTERFULL ) || \ + ((THRESHOLD) == DMA_FIFO_THRESHOLD_HALFFULL) || \ + ((THRESHOLD) == DMA_FIFO_THRESHOLD_3QUARTERSFULL) || \ + ((THRESHOLD) == DMA_FIFO_THRESHOLD_FULL)) + +#define IS_DMA_MEMORY_BURST(BURST) (((BURST) == DMA_MBURST_SINGLE) || \ + ((BURST) == DMA_MBURST_INC4) || \ + ((BURST) == DMA_MBURST_INC8) || \ + ((BURST) == DMA_MBURST_INC16)) + +#define IS_DMA_PERIPHERAL_BURST(BURST) (((BURST) == DMA_PBURST_SINGLE) || \ + ((BURST) == DMA_PBURST_INC4) || \ + ((BURST) == DMA_PBURST_INC8) || \ + ((BURST) == DMA_PBURST_INC16)) +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup DMA_Private_Functions DMA Private Functions + * @brief DMA private functions + * @{ + */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_DMA_H */ + diff --git a/Drivers/stm32f4xx_hal_dma_ex.c b/libs/hal/stm32f4xx_hal_dma_ex.c similarity index 97% rename from Drivers/stm32f4xx_hal_dma_ex.c rename to libs/hal/stm32f4xx_hal_dma_ex.c index d38cfcd..7167e77 100644 --- a/Drivers/stm32f4xx_hal_dma_ex.c +++ b/libs/hal/stm32f4xx_hal_dma_ex.c @@ -1,313 +1,313 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dma_ex.c - * @author MCD Application Team - * @brief DMA Extension HAL module driver - * This file provides firmware functions to manage the following - * functionalities of the DMA Extension peripheral: - * + Extended features functions - * - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The DMA Extension HAL driver can be used as follows: - (#) Start a multi buffer transfer using the HAL_DMA_MultiBufferStart() function - for polling mode or HAL_DMA_MultiBufferStart_IT() for interrupt mode. - - -@- In Memory-to-Memory transfer mode, Multi (Double) Buffer mode is not allowed. - -@- When Multi (Double) Buffer mode is enabled the, transfer is circular by default. - -@- In Multi (Double) buffer mode, it is possible to update the base address for - the AHB memory port on the fly (DMA_SxM0AR or DMA_SxM1AR) when the stream is enabled. - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup DMAEx DMAEx - * @brief DMA Extended HAL module driver - * @{ - */ - -#ifdef HAL_DMA_MODULE_ENABLED - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private Constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/** @addtogroup DMAEx_Private_Functions - * @{ - */ -static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); -/** - * @} - */ - -/* Exported functions ---------------------------------------------------------*/ - -/** @addtogroup DMAEx_Exported_Functions - * @{ - */ - - -/** @addtogroup DMAEx_Exported_Functions_Group1 - * -@verbatim - =============================================================================== - ##### Extended features functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Configure the source, destination address and data length and - Start MultiBuffer DMA transfer - (+) Configure the source, destination address and data length and - Start MultiBuffer DMA transfer with interrupt - (+) Change on the fly the memory0 or memory1 address. - -@endverbatim - * @{ - */ - - -/** - * @brief Starts the multi_buffer DMA Transfer. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param SrcAddress The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param SecondMemAddress The second memory Buffer address in case of multi buffer Transfer - * @param DataLength The length of data to be transferred from source to destination - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_DMA_BUFFER_SIZE(DataLength)); - - /* Memory-to-memory transfer not supported in double buffering mode */ - if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY) - { - hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; - status = HAL_ERROR; - } - else - { - /* Process Locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - - /* Enable the double buffer mode */ - hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM; - - /* Configure DMA Stream destination address */ - hdma->Instance->M1AR = SecondMemAddress; - - /* Configure the source, destination address and the data length */ - DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength); - - /* Enable the peripheral */ - __HAL_DMA_ENABLE(hdma); - } - else - { - /* Return error status */ - status = HAL_BUSY; - } - } - return status; -} - -/** - * @brief Starts the multi_buffer DMA Transfer with interrupt enabled. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param SrcAddress The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param SecondMemAddress The second memory Buffer address in case of multi buffer Transfer - * @param DataLength The length of data to be transferred from source to destination - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_DMA_BUFFER_SIZE(DataLength)); - - /* Memory-to-memory transfer not supported in double buffering mode */ - if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY) - { - hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; - return HAL_ERROR; - } - - /* Check callback functions */ - if ((NULL == hdma->XferCpltCallback) || (NULL == hdma->XferM1CpltCallback) || (NULL == hdma->XferErrorCallback)) - { - hdma->ErrorCode = HAL_DMA_ERROR_PARAM; - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hdma); - - if(HAL_DMA_STATE_READY == hdma->State) - { - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - - /* Initialize the error code */ - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Enable the Double buffer mode */ - hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM; - - /* Configure DMA Stream destination address */ - hdma->Instance->M1AR = SecondMemAddress; - - /* Configure the source, destination address and the data length */ - DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength); - - /* Clear all flags */ - __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma)); - __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma)); - __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma)); - __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_DME_FLAG_INDEX(hdma)); - __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_FE_FLAG_INDEX(hdma)); - - /* Enable Common interrupts*/ - hdma->Instance->CR |= DMA_IT_TC | DMA_IT_TE | DMA_IT_DME; - hdma->Instance->FCR |= DMA_IT_FE; - - if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL)) - { - hdma->Instance->CR |= DMA_IT_HT; - } - - /* Enable the peripheral */ - __HAL_DMA_ENABLE(hdma); - } - else - { - /* Process unlocked */ - __HAL_UNLOCK(hdma); - - /* Return error status */ - status = HAL_BUSY; - } - return status; -} - -/** - * @brief Change the memory0 or memory1 address on the fly. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param Address The new address - * @param memory the memory to be changed, This parameter can be one of - * the following values: - * MEMORY0 / - * MEMORY1 - * @note The MEMORY0 address can be changed only when the current transfer use - * MEMORY1 and the MEMORY1 address can be changed only when the current - * transfer use MEMORY0. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory) -{ - if(memory == MEMORY0) - { - /* change the memory0 address */ - hdma->Instance->M0AR = Address; - } - else - { - /* change the memory1 address */ - hdma->Instance->M1AR = Address; - } - - return HAL_OK; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup DMAEx_Private_Functions - * @{ - */ - -/** - * @brief Set the DMA Transfer parameter. - * @param hdma pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. - * @param SrcAddress The source memory Buffer address - * @param DstAddress The destination memory Buffer address - * @param DataLength The length of data to be transferred from source to destination - * @retval HAL status - */ -static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) -{ - /* Configure DMA Stream data length */ - hdma->Instance->NDTR = DataLength; - - /* Peripheral to Memory */ - if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) - { - /* Configure DMA Stream destination address */ - hdma->Instance->PAR = DstAddress; - - /* Configure DMA Stream source address */ - hdma->Instance->M0AR = SrcAddress; - } - /* Memory to Peripheral */ - else - { - /* Configure DMA Stream source address */ - hdma->Instance->PAR = SrcAddress; - - /* Configure DMA Stream destination address */ - hdma->Instance->M0AR = DstAddress; - } -} - -/** - * @} - */ - -#endif /* HAL_DMA_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - +/** + ****************************************************************************** + * @file stm32f4xx_hal_dma_ex.c + * @author MCD Application Team + * @brief DMA Extension HAL module driver + * This file provides firmware functions to manage the following + * functionalities of the DMA Extension peripheral: + * + Extended features functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The DMA Extension HAL driver can be used as follows: + (#) Start a multi buffer transfer using the HAL_DMA_MultiBufferStart() function + for polling mode or HAL_DMA_MultiBufferStart_IT() for interrupt mode. + + -@- In Memory-to-Memory transfer mode, Multi (Double) Buffer mode is not allowed. + -@- When Multi (Double) Buffer mode is enabled the, transfer is circular by default. + -@- In Multi (Double) buffer mode, it is possible to update the base address for + the AHB memory port on the fly (DMA_SxM0AR or DMA_SxM1AR) when the stream is enabled. + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup DMAEx DMAEx + * @brief DMA Extended HAL module driver + * @{ + */ + +#ifdef HAL_DMA_MODULE_ENABLED + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private Constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup DMAEx_Private_Functions + * @{ + */ +static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @addtogroup DMAEx_Exported_Functions + * @{ + */ + + +/** @addtogroup DMAEx_Exported_Functions_Group1 + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the source, destination address and data length and + Start MultiBuffer DMA transfer + (+) Configure the source, destination address and data length and + Start MultiBuffer DMA transfer with interrupt + (+) Change on the fly the memory0 or memory1 address. + +@endverbatim + * @{ + */ + + +/** + * @brief Starts the multi_buffer DMA Transfer. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param SecondMemAddress The second memory Buffer address in case of multi buffer Transfer + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Memory-to-memory transfer not supported in double buffering mode */ + if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY) + { + hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; + status = HAL_ERROR; + } + else + { + /* Process Locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Enable the double buffer mode */ + hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM; + + /* Configure DMA Stream destination address */ + hdma->Instance->M1AR = SecondMemAddress; + + /* Configure the source, destination address and the data length */ + DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Return error status */ + status = HAL_BUSY; + } + } + return status; +} + +/** + * @brief Starts the multi_buffer DMA Transfer with interrupt enabled. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param SecondMemAddress The second memory Buffer address in case of multi buffer Transfer + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Memory-to-memory transfer not supported in double buffering mode */ + if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY) + { + hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; + return HAL_ERROR; + } + + /* Check callback functions */ + if ((NULL == hdma->XferCpltCallback) || (NULL == hdma->XferM1CpltCallback) || (NULL == hdma->XferErrorCallback)) + { + hdma->ErrorCode = HAL_DMA_ERROR_PARAM; + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Enable the Double buffer mode */ + hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM; + + /* Configure DMA Stream destination address */ + hdma->Instance->M1AR = SecondMemAddress; + + /* Configure the source, destination address and the data length */ + DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Clear all flags */ + __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma)); + __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma)); + __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma)); + __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_DME_FLAG_INDEX(hdma)); + __HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_FE_FLAG_INDEX(hdma)); + + /* Enable Common interrupts*/ + hdma->Instance->CR |= DMA_IT_TC | DMA_IT_TE | DMA_IT_DME; + hdma->Instance->FCR |= DMA_IT_FE; + + if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL)) + { + hdma->Instance->CR |= DMA_IT_HT; + } + + /* Enable the peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + /* Return error status */ + status = HAL_BUSY; + } + return status; +} + +/** + * @brief Change the memory0 or memory1 address on the fly. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param Address The new address + * @param memory the memory to be changed, This parameter can be one of + * the following values: + * MEMORY0 / + * MEMORY1 + * @note The MEMORY0 address can be changed only when the current transfer use + * MEMORY1 and the MEMORY1 address can be changed only when the current + * transfer use MEMORY0. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory) +{ + if(memory == MEMORY0) + { + /* change the memory0 address */ + hdma->Instance->M0AR = Address; + } + else + { + /* change the memory1 address */ + hdma->Instance->M1AR = Address; + } + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DMAEx_Private_Functions + * @{ + */ + +/** + * @brief Set the DMA Transfer parameter. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + /* Configure DMA Stream data length */ + hdma->Instance->NDTR = DataLength; + + /* Peripheral to Memory */ + if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) + { + /* Configure DMA Stream destination address */ + hdma->Instance->PAR = DstAddress; + + /* Configure DMA Stream source address */ + hdma->Instance->M0AR = SrcAddress; + } + /* Memory to Peripheral */ + else + { + /* Configure DMA Stream source address */ + hdma->Instance->PAR = SrcAddress; + + /* Configure DMA Stream destination address */ + hdma->Instance->M0AR = DstAddress; + } +} + +/** + * @} + */ + +#endif /* HAL_DMA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/stm32f4xx_hal_dma_ex.h b/libs/hal/stm32f4xx_hal_dma_ex.h similarity index 96% rename from Drivers/stm32f4xx_hal_dma_ex.h rename to libs/hal/stm32f4xx_hal_dma_ex.h index 266c1fa..9858c74 100644 --- a/Drivers/stm32f4xx_hal_dma_ex.h +++ b/libs/hal/stm32f4xx_hal_dma_ex.h @@ -1,102 +1,102 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dma_ex.h - * @author MCD Application Team - * @brief Header file of DMA HAL extension module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_DMA_EX_H -#define __STM32F4xx_HAL_DMA_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup DMAEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup DMAEx_Exported_Types DMAEx Exported Types - * @brief DMAEx Exported types - * @{ - */ - -/** - * @brief HAL DMA Memory definition - */ -typedef enum -{ - MEMORY0 = 0x00U, /*!< Memory 0 */ - MEMORY1 = 0x01U /*!< Memory 1 */ -}HAL_DMA_MemoryTypeDef; - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions - * @brief DMAEx Exported functions - * @{ - */ - -/** @defgroup DMAEx_Exported_Functions_Group1 Extended features functions - * @brief Extended features functions - * @{ - */ - -/* IO operation functions *******************************************************/ -HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength); -HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength); -HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory); - -/** - * @} - */ -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup DMAEx_Private_Functions DMAEx Private Functions - * @brief DMAEx Private functions - * @{ - */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F4xx_HAL_DMA_EX_H*/ - +/** + ****************************************************************************** + * @file stm32f4xx_hal_dma_ex.h + * @author MCD Application Team + * @brief Header file of DMA HAL extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_DMA_EX_H +#define __STM32F4xx_HAL_DMA_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup DMAEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup DMAEx_Exported_Types DMAEx Exported Types + * @brief DMAEx Exported types + * @{ + */ + +/** + * @brief HAL DMA Memory definition + */ +typedef enum +{ + MEMORY0 = 0x00U, /*!< Memory 0 */ + MEMORY1 = 0x01U /*!< Memory 1 */ +}HAL_DMA_MemoryTypeDef; + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions + * @brief DMAEx Exported functions + * @{ + */ + +/** @defgroup DMAEx_Exported_Functions_Group1 Extended features functions + * @brief Extended features functions + * @{ + */ + +/* IO operation functions *******************************************************/ +HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory); + +/** + * @} + */ +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup DMAEx_Private_Functions DMAEx Private Functions + * @brief DMAEx Private functions + * @{ + */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F4xx_HAL_DMA_EX_H*/ + diff --git a/Drivers/stm32f4xx_hal_exti.c b/libs/hal/stm32f4xx_hal_exti.c similarity index 96% rename from Drivers/stm32f4xx_hal_exti.c rename to libs/hal/stm32f4xx_hal_exti.c index f0eff70..04b5215 100644 --- a/Drivers/stm32f4xx_hal_exti.c +++ b/libs/hal/stm32f4xx_hal_exti.c @@ -1,547 +1,547 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_exti.c - * @author MCD Application Team - * @brief EXTI HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Extended Interrupts and events controller (EXTI) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2018 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### EXTI Peripheral features ##### - ============================================================================== - [..] - (+) Each Exti line can be configured within this driver. - - (+) Exti line can be configured in 3 different modes - (++) Interrupt - (++) Event - (++) Both of them - - (+) Configurable Exti lines can be configured with 3 different triggers - (++) Rising - (++) Falling - (++) Both of them - - (+) When set in interrupt mode, configurable Exti lines have two different - interrupts pending registers which allow to distinguish which transition - occurs: - (++) Rising edge pending interrupt - (++) Falling - - (+) Exti lines 0 to 15 are linked to gpio pin number 0 to 15. Gpio port can - be selected through multiplexer. - - ##### How to use this driver ##### - ============================================================================== - [..] - - (#) Configure the EXTI line using HAL_EXTI_SetConfigLine(). - (++) Choose the interrupt line number by setting "Line" member from - EXTI_ConfigTypeDef structure. - (++) Configure the interrupt and/or event mode using "Mode" member from - EXTI_ConfigTypeDef structure. - (++) For configurable lines, configure rising and/or falling trigger - "Trigger" member from EXTI_ConfigTypeDef structure. - (++) For Exti lines linked to gpio, choose gpio port using "GPIOSel" - member from GPIO_InitTypeDef structure. - - (#) Get current Exti configuration of a dedicated line using - HAL_EXTI_GetConfigLine(). - (++) Provide exiting handle as parameter. - (++) Provide pointer on EXTI_ConfigTypeDef structure as second parameter. - - (#) Clear Exti configuration of a dedicated line using HAL_EXTI_GetConfigLine(). - (++) Provide exiting handle as parameter. - - (#) Register callback to treat Exti interrupts using HAL_EXTI_RegisterCallback(). - (++) Provide exiting handle as first parameter. - (++) Provide which callback will be registered using one value from - EXTI_CallbackIDTypeDef. - (++) Provide callback function pointer. - - (#) Get interrupt pending bit using HAL_EXTI_GetPending(). - - (#) Clear interrupt pending bit using HAL_EXTI_GetPending(). - - (#) Generate software interrupt using HAL_EXTI_GenerateSWI(). - - @endverbatim - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup EXTI - * @{ - */ -/** MISRA C:2012 deviation rule has been granted for following rule: - * Rule-18.1_b - Medium: Array `EXTICR' 1st subscript interval [0,7] may be out - * of bounds [0,3] in following API : - * HAL_EXTI_SetConfigLine - * HAL_EXTI_GetConfigLine - * HAL_EXTI_ClearConfigLine - */ - -#ifdef HAL_EXTI_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private defines -----------------------------------------------------------*/ -/** @defgroup EXTI_Private_Constants EXTI Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup EXTI_Exported_Functions - * @{ - */ - -/** @addtogroup EXTI_Exported_Functions_Group1 - * @brief Configuration functions - * -@verbatim - =============================================================================== - ##### Configuration functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Set configuration of a dedicated Exti line. - * @param hexti Exti handle. - * @param pExtiConfig Pointer on EXTI configuration to be set. - * @retval HAL Status. - */ -HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) -{ - uint32_t regval; - uint32_t linepos; - uint32_t maskline; - - /* Check null pointer */ - if ((hexti == NULL) || (pExtiConfig == NULL)) - { - return HAL_ERROR; - } - - /* Check parameters */ - assert_param(IS_EXTI_LINE(pExtiConfig->Line)); - assert_param(IS_EXTI_MODE(pExtiConfig->Mode)); - - /* Assign line number to handle */ - hexti->Line = pExtiConfig->Line; - - /* Compute line mask */ - linepos = (pExtiConfig->Line & EXTI_PIN_MASK); - maskline = (1uL << linepos); - - /* Configure triggers for configurable lines */ - if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u) - { - assert_param(IS_EXTI_TRIGGER(pExtiConfig->Trigger)); - - /* Configure rising trigger */ - /* Mask or set line */ - if ((pExtiConfig->Trigger & EXTI_TRIGGER_RISING) != 0x00u) - { - EXTI->RTSR |= maskline; - } - else - { - EXTI->RTSR &= ~maskline; - } - - /* Configure falling trigger */ - /* Mask or set line */ - if ((pExtiConfig->Trigger & EXTI_TRIGGER_FALLING) != 0x00u) - { - EXTI->FTSR |= maskline; - } - else - { - EXTI->FTSR &= ~maskline; - } - - - /* Configure gpio port selection in case of gpio exti line */ - if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) - { - assert_param(IS_EXTI_GPIO_PORT(pExtiConfig->GPIOSel)); - assert_param(IS_EXTI_GPIO_PIN(linepos)); - - regval = SYSCFG->EXTICR[linepos >> 2u]; - regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); - regval |= (pExtiConfig->GPIOSel << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); - SYSCFG->EXTICR[linepos >> 2u] = regval; - } - } - - /* Configure interrupt mode : read current mode */ - /* Mask or set line */ - if ((pExtiConfig->Mode & EXTI_MODE_INTERRUPT) != 0x00u) - { - EXTI->IMR |= maskline; - } - else - { - EXTI->IMR &= ~maskline; - } - - /* Configure event mode : read current mode */ - /* Mask or set line */ - if ((pExtiConfig->Mode & EXTI_MODE_EVENT) != 0x00u) - { - EXTI->EMR |= maskline; - } - else - { - EXTI->EMR &= ~maskline; - } - - return HAL_OK; -} - -/** - * @brief Get configuration of a dedicated Exti line. - * @param hexti Exti handle. - * @param pExtiConfig Pointer on structure to store Exti configuration. - * @retval HAL Status. - */ -HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) -{ - uint32_t regval; - uint32_t linepos; - uint32_t maskline; - - /* Check null pointer */ - if ((hexti == NULL) || (pExtiConfig == NULL)) - { - return HAL_ERROR; - } - - /* Check the parameter */ - assert_param(IS_EXTI_LINE(hexti->Line)); - - /* Store handle line number to configuration structure */ - pExtiConfig->Line = hexti->Line; - - /* Compute line mask */ - linepos = (pExtiConfig->Line & EXTI_PIN_MASK); - maskline = (1uL << linepos); - - /* 1] Get core mode : interrupt */ - - /* Check if selected line is enable */ - if ((EXTI->IMR & maskline) != 0x00u) - { - pExtiConfig->Mode = EXTI_MODE_INTERRUPT; - } - else - { - pExtiConfig->Mode = EXTI_MODE_NONE; - } - - /* Get event mode */ - /* Check if selected line is enable */ - if ((EXTI->EMR & maskline) != 0x00u) - { - pExtiConfig->Mode |= EXTI_MODE_EVENT; - } - - /* Get default Trigger and GPIOSel configuration */ - pExtiConfig->Trigger = EXTI_TRIGGER_NONE; - pExtiConfig->GPIOSel = 0x00u; - - /* 2] Get trigger for configurable lines : rising */ - if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u) - { - /* Check if configuration of selected line is enable */ - if ((EXTI->RTSR & maskline) != 0x00u) - { - pExtiConfig->Trigger = EXTI_TRIGGER_RISING; - } - - /* Get falling configuration */ - /* Check if configuration of selected line is enable */ - if ((EXTI->FTSR & maskline) != 0x00u) - { - pExtiConfig->Trigger |= EXTI_TRIGGER_FALLING; - } - - /* Get Gpio port selection for gpio lines */ - if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) - { - assert_param(IS_EXTI_GPIO_PIN(linepos)); - - regval = (SYSCFG->EXTICR[linepos >> 2u] << 16u ); - pExtiConfig->GPIOSel = ((regval << (SYSCFG_EXTICR1_EXTI1_Pos * (3uL - (linepos & 0x03u)))) >> 28u); - } - } - - return HAL_OK; -} - -/** - * @brief Clear whole configuration of a dedicated Exti line. - * @param hexti Exti handle. - * @retval HAL Status. - */ -HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti) -{ - uint32_t regval; - uint32_t linepos; - uint32_t maskline; - - /* Check null pointer */ - if (hexti == NULL) - { - return HAL_ERROR; - } - - /* Check the parameter */ - assert_param(IS_EXTI_LINE(hexti->Line)); - - /* compute line mask */ - linepos = (hexti->Line & EXTI_PIN_MASK); - maskline = (1uL << linepos); - - /* 1] Clear interrupt mode */ - EXTI->IMR = (EXTI->IMR & ~maskline); - - /* 2] Clear event mode */ - EXTI->EMR = (EXTI->EMR & ~maskline); - - /* 3] Clear triggers in case of configurable lines */ - if ((hexti->Line & EXTI_CONFIG) != 0x00u) - { - EXTI->RTSR = (EXTI->RTSR & ~maskline); - EXTI->FTSR = (EXTI->FTSR & ~maskline); - - /* Get Gpio port selection for gpio lines */ - if ((hexti->Line & EXTI_GPIO) == EXTI_GPIO) - { - assert_param(IS_EXTI_GPIO_PIN(linepos)); - - regval = SYSCFG->EXTICR[linepos >> 2u]; - regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); - SYSCFG->EXTICR[linepos >> 2u] = regval; - } - } - - return HAL_OK; -} - -/** - * @brief Register callback for a dedicated Exti line. - * @param hexti Exti handle. - * @param CallbackID User callback identifier. - * This parameter can be one of @arg @ref EXTI_CallbackIDTypeDef values. - * @param pPendingCbfn function pointer to be stored as callback. - * @retval HAL Status. - */ -HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)) -{ - HAL_StatusTypeDef status = HAL_OK; - - switch (CallbackID) - { - case HAL_EXTI_COMMON_CB_ID: - hexti->PendingCallback = pPendingCbfn; - break; - - default: - status = HAL_ERROR; - break; - } - - return status; -} - -/** - * @brief Store line number as handle private field. - * @param hexti Exti handle. - * @param ExtiLine Exti line number. - * This parameter can be from 0 to @ref EXTI_LINE_NB. - * @retval HAL Status. - */ -HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine) -{ - /* Check the parameters */ - assert_param(IS_EXTI_LINE(ExtiLine)); - - /* Check null pointer */ - if (hexti == NULL) - { - return HAL_ERROR; - } - else - { - /* Store line number as handle private field */ - hexti->Line = ExtiLine; - - return HAL_OK; - } -} - -/** - * @} - */ - -/** @addtogroup EXTI_Exported_Functions_Group2 - * @brief EXTI IO functions. - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Handle EXTI interrupt request. - * @param hexti Exti handle. - * @retval none. - */ -void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti) -{ - uint32_t regval; - uint32_t maskline; - - /* Compute line mask */ - maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); - - /* Get pending bit */ - regval = (EXTI->PR & maskline); - if (regval != 0x00u) - { - /* Clear pending bit */ - EXTI->PR = maskline; - - /* Call callback */ - if (hexti->PendingCallback != NULL) - { - hexti->PendingCallback(); - } - } -} - -/** - * @brief Get interrupt pending bit of a dedicated line. - * @param hexti Exti handle. - * @param Edge Specify which pending edge as to be checked. - * This parameter can be one of the following values: - * @arg @ref EXTI_TRIGGER_RISING_FALLING - * This parameter is kept for compatibility with other series. - * @retval 1 if interrupt is pending else 0. - */ -uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) -{ - uint32_t regval; - uint32_t linepos; - uint32_t maskline; - - /* Check parameters */ - assert_param(IS_EXTI_LINE(hexti->Line)); - assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); - assert_param(IS_EXTI_PENDING_EDGE(Edge)); - - /* Compute line mask */ - linepos = (hexti->Line & EXTI_PIN_MASK); - maskline = (1uL << linepos); - - /* return 1 if bit is set else 0 */ - regval = ((EXTI->PR & maskline) >> linepos); - return regval; -} - -/** - * @brief Clear interrupt pending bit of a dedicated line. - * @param hexti Exti handle. - * @param Edge Specify which pending edge as to be clear. - * This parameter can be one of the following values: - * @arg @ref EXTI_TRIGGER_RISING_FALLING - * This parameter is kept for compatibility with other series. - * @retval None. - */ -void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) -{ - uint32_t maskline; - - /* Check parameters */ - assert_param(IS_EXTI_LINE(hexti->Line)); - assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); - assert_param(IS_EXTI_PENDING_EDGE(Edge)); - - /* Compute line mask */ - maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); - - /* Clear Pending bit */ - EXTI->PR = maskline; -} - -/** - * @brief Generate a software interrupt for a dedicated line. - * @param hexti Exti handle. - * @retval None. - */ -void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti) -{ - uint32_t maskline; - - /* Check parameters */ - assert_param(IS_EXTI_LINE(hexti->Line)); - assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); - - /* Compute line mask */ - maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); - - /* Generate Software interrupt */ - EXTI->SWIER = maskline; -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_EXTI_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - +/** + ****************************************************************************** + * @file stm32f4xx_hal_exti.c + * @author MCD Application Team + * @brief EXTI HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Extended Interrupts and events controller (EXTI) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### EXTI Peripheral features ##### + ============================================================================== + [..] + (+) Each Exti line can be configured within this driver. + + (+) Exti line can be configured in 3 different modes + (++) Interrupt + (++) Event + (++) Both of them + + (+) Configurable Exti lines can be configured with 3 different triggers + (++) Rising + (++) Falling + (++) Both of them + + (+) When set in interrupt mode, configurable Exti lines have two different + interrupts pending registers which allow to distinguish which transition + occurs: + (++) Rising edge pending interrupt + (++) Falling + + (+) Exti lines 0 to 15 are linked to gpio pin number 0 to 15. Gpio port can + be selected through multiplexer. + + ##### How to use this driver ##### + ============================================================================== + [..] + + (#) Configure the EXTI line using HAL_EXTI_SetConfigLine(). + (++) Choose the interrupt line number by setting "Line" member from + EXTI_ConfigTypeDef structure. + (++) Configure the interrupt and/or event mode using "Mode" member from + EXTI_ConfigTypeDef structure. + (++) For configurable lines, configure rising and/or falling trigger + "Trigger" member from EXTI_ConfigTypeDef structure. + (++) For Exti lines linked to gpio, choose gpio port using "GPIOSel" + member from GPIO_InitTypeDef structure. + + (#) Get current Exti configuration of a dedicated line using + HAL_EXTI_GetConfigLine(). + (++) Provide exiting handle as parameter. + (++) Provide pointer on EXTI_ConfigTypeDef structure as second parameter. + + (#) Clear Exti configuration of a dedicated line using HAL_EXTI_GetConfigLine(). + (++) Provide exiting handle as parameter. + + (#) Register callback to treat Exti interrupts using HAL_EXTI_RegisterCallback(). + (++) Provide exiting handle as first parameter. + (++) Provide which callback will be registered using one value from + EXTI_CallbackIDTypeDef. + (++) Provide callback function pointer. + + (#) Get interrupt pending bit using HAL_EXTI_GetPending(). + + (#) Clear interrupt pending bit using HAL_EXTI_GetPending(). + + (#) Generate software interrupt using HAL_EXTI_GenerateSWI(). + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup EXTI + * @{ + */ +/** MISRA C:2012 deviation rule has been granted for following rule: + * Rule-18.1_b - Medium: Array `EXTICR' 1st subscript interval [0,7] may be out + * of bounds [0,3] in following API : + * HAL_EXTI_SetConfigLine + * HAL_EXTI_GetConfigLine + * HAL_EXTI_ClearConfigLine + */ + +#ifdef HAL_EXTI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup EXTI_Private_Constants EXTI Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup EXTI_Exported_Functions + * @{ + */ + +/** @addtogroup EXTI_Exported_Functions_Group1 + * @brief Configuration functions + * +@verbatim + =============================================================================== + ##### Configuration functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Set configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @param pExtiConfig Pointer on EXTI configuration to be set. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) +{ + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + + /* Check null pointer */ + if ((hexti == NULL) || (pExtiConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check parameters */ + assert_param(IS_EXTI_LINE(pExtiConfig->Line)); + assert_param(IS_EXTI_MODE(pExtiConfig->Mode)); + + /* Assign line number to handle */ + hexti->Line = pExtiConfig->Line; + + /* Compute line mask */ + linepos = (pExtiConfig->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* Configure triggers for configurable lines */ + if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u) + { + assert_param(IS_EXTI_TRIGGER(pExtiConfig->Trigger)); + + /* Configure rising trigger */ + /* Mask or set line */ + if ((pExtiConfig->Trigger & EXTI_TRIGGER_RISING) != 0x00u) + { + EXTI->RTSR |= maskline; + } + else + { + EXTI->RTSR &= ~maskline; + } + + /* Configure falling trigger */ + /* Mask or set line */ + if ((pExtiConfig->Trigger & EXTI_TRIGGER_FALLING) != 0x00u) + { + EXTI->FTSR |= maskline; + } + else + { + EXTI->FTSR &= ~maskline; + } + + + /* Configure gpio port selection in case of gpio exti line */ + if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PORT(pExtiConfig->GPIOSel)); + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = SYSCFG->EXTICR[linepos >> 2u]; + regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + regval |= (pExtiConfig->GPIOSel << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + SYSCFG->EXTICR[linepos >> 2u] = regval; + } + } + + /* Configure interrupt mode : read current mode */ + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_INTERRUPT) != 0x00u) + { + EXTI->IMR |= maskline; + } + else + { + EXTI->IMR &= ~maskline; + } + + /* Configure event mode : read current mode */ + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_EVENT) != 0x00u) + { + EXTI->EMR |= maskline; + } + else + { + EXTI->EMR &= ~maskline; + } + + return HAL_OK; +} + +/** + * @brief Get configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @param pExtiConfig Pointer on structure to store Exti configuration. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) +{ + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + + /* Check null pointer */ + if ((hexti == NULL) || (pExtiConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameter */ + assert_param(IS_EXTI_LINE(hexti->Line)); + + /* Store handle line number to configuration structure */ + pExtiConfig->Line = hexti->Line; + + /* Compute line mask */ + linepos = (pExtiConfig->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* 1] Get core mode : interrupt */ + + /* Check if selected line is enable */ + if ((EXTI->IMR & maskline) != 0x00u) + { + pExtiConfig->Mode = EXTI_MODE_INTERRUPT; + } + else + { + pExtiConfig->Mode = EXTI_MODE_NONE; + } + + /* Get event mode */ + /* Check if selected line is enable */ + if ((EXTI->EMR & maskline) != 0x00u) + { + pExtiConfig->Mode |= EXTI_MODE_EVENT; + } + + /* Get default Trigger and GPIOSel configuration */ + pExtiConfig->Trigger = EXTI_TRIGGER_NONE; + pExtiConfig->GPIOSel = 0x00u; + + /* 2] Get trigger for configurable lines : rising */ + if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u) + { + /* Check if configuration of selected line is enable */ + if ((EXTI->RTSR & maskline) != 0x00u) + { + pExtiConfig->Trigger = EXTI_TRIGGER_RISING; + } + + /* Get falling configuration */ + /* Check if configuration of selected line is enable */ + if ((EXTI->FTSR & maskline) != 0x00u) + { + pExtiConfig->Trigger |= EXTI_TRIGGER_FALLING; + } + + /* Get Gpio port selection for gpio lines */ + if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = (SYSCFG->EXTICR[linepos >> 2u] << 16u ); + pExtiConfig->GPIOSel = ((regval << (SYSCFG_EXTICR1_EXTI1_Pos * (3uL - (linepos & 0x03u)))) >> 28u); + } + } + + return HAL_OK; +} + +/** + * @brief Clear whole configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti) +{ + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + + /* Check the parameter */ + assert_param(IS_EXTI_LINE(hexti->Line)); + + /* compute line mask */ + linepos = (hexti->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* 1] Clear interrupt mode */ + EXTI->IMR = (EXTI->IMR & ~maskline); + + /* 2] Clear event mode */ + EXTI->EMR = (EXTI->EMR & ~maskline); + + /* 3] Clear triggers in case of configurable lines */ + if ((hexti->Line & EXTI_CONFIG) != 0x00u) + { + EXTI->RTSR = (EXTI->RTSR & ~maskline); + EXTI->FTSR = (EXTI->FTSR & ~maskline); + + /* Get Gpio port selection for gpio lines */ + if ((hexti->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = SYSCFG->EXTICR[linepos >> 2u]; + regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + SYSCFG->EXTICR[linepos >> 2u] = regval; + } + } + + return HAL_OK; +} + +/** + * @brief Register callback for a dedicated Exti line. + * @param hexti Exti handle. + * @param CallbackID User callback identifier. + * This parameter can be one of @arg @ref EXTI_CallbackIDTypeDef values. + * @param pPendingCbfn function pointer to be stored as callback. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)) +{ + HAL_StatusTypeDef status = HAL_OK; + + switch (CallbackID) + { + case HAL_EXTI_COMMON_CB_ID: + hexti->PendingCallback = pPendingCbfn; + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Store line number as handle private field. + * @param hexti Exti handle. + * @param ExtiLine Exti line number. + * This parameter can be from 0 to @ref EXTI_LINE_NB. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(ExtiLine)); + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + else + { + /* Store line number as handle private field */ + hexti->Line = ExtiLine; + + return HAL_OK; + } +} + +/** + * @} + */ + +/** @addtogroup EXTI_Exported_Functions_Group2 + * @brief EXTI IO functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Handle EXTI interrupt request. + * @param hexti Exti handle. + * @retval none. + */ +void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti) +{ + uint32_t regval; + uint32_t maskline; + + /* Compute line mask */ + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + /* Get pending bit */ + regval = (EXTI->PR & maskline); + if (regval != 0x00u) + { + /* Clear pending bit */ + EXTI->PR = maskline; + + /* Call callback */ + if (hexti->PendingCallback != NULL) + { + hexti->PendingCallback(); + } + } +} + +/** + * @brief Get interrupt pending bit of a dedicated line. + * @param hexti Exti handle. + * @param Edge Specify which pending edge as to be checked. + * This parameter can be one of the following values: + * @arg @ref EXTI_TRIGGER_RISING_FALLING + * This parameter is kept for compatibility with other series. + * @retval 1 if interrupt is pending else 0. + */ +uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) +{ + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + assert_param(IS_EXTI_PENDING_EDGE(Edge)); + + /* Compute line mask */ + linepos = (hexti->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* return 1 if bit is set else 0 */ + regval = ((EXTI->PR & maskline) >> linepos); + return regval; +} + +/** + * @brief Clear interrupt pending bit of a dedicated line. + * @param hexti Exti handle. + * @param Edge Specify which pending edge as to be clear. + * This parameter can be one of the following values: + * @arg @ref EXTI_TRIGGER_RISING_FALLING + * This parameter is kept for compatibility with other series. + * @retval None. + */ +void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) +{ + uint32_t maskline; + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + assert_param(IS_EXTI_PENDING_EDGE(Edge)); + + /* Compute line mask */ + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + /* Clear Pending bit */ + EXTI->PR = maskline; +} + +/** + * @brief Generate a software interrupt for a dedicated line. + * @param hexti Exti handle. + * @retval None. + */ +void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti) +{ + uint32_t maskline; + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + + /* Compute line mask */ + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + /* Generate Software interrupt */ + EXTI->SWIER = maskline; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_EXTI_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/stm32f4xx_hal_exti.h b/libs/hal/stm32f4xx_hal_exti.h similarity index 97% rename from Drivers/stm32f4xx_hal_exti.h rename to libs/hal/stm32f4xx_hal_exti.h index a7af121..b18a228 100644 --- a/Drivers/stm32f4xx_hal_exti.h +++ b/libs/hal/stm32f4xx_hal_exti.h @@ -1,366 +1,366 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_exti.h - * @author MCD Application Team - * @brief Header file of EXTI HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2018 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS.Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32f4xx_HAL_EXTI_H -#define STM32f4xx_HAL_EXTI_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup EXTI EXTI - * @brief EXTI HAL module driver - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup EXTI_Exported_Types EXTI Exported Types - * @{ - */ -typedef enum -{ - HAL_EXTI_COMMON_CB_ID = 0x00U -} EXTI_CallbackIDTypeDef; - -/** - * @brief EXTI Handle structure definition - */ -typedef struct -{ - uint32_t Line; /*!< Exti line number */ - void (* PendingCallback)(void); /*!< Exti pending callback */ -} EXTI_HandleTypeDef; - -/** - * @brief EXTI Configuration structure definition - */ -typedef struct -{ - uint32_t Line; /*!< The Exti line to be configured. This parameter - can be a value of @ref EXTI_Line */ - uint32_t Mode; /*!< The Exit Mode to be configured for a core. - This parameter can be a combination of @ref EXTI_Mode */ - uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter - can be a value of @ref EXTI_Trigger */ - uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured. - This parameter is only possible for line 0 to 15. It - can be a value of @ref EXTI_GPIOSel */ -} EXTI_ConfigTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup EXTI_Exported_Constants EXTI Exported Constants - * @{ - */ - -/** @defgroup EXTI_Line EXTI Line - * @{ - */ -#define EXTI_LINE_0 (EXTI_GPIO | 0x00u) /*!< External interrupt line 0 */ -#define EXTI_LINE_1 (EXTI_GPIO | 0x01u) /*!< External interrupt line 1 */ -#define EXTI_LINE_2 (EXTI_GPIO | 0x02u) /*!< External interrupt line 2 */ -#define EXTI_LINE_3 (EXTI_GPIO | 0x03u) /*!< External interrupt line 3 */ -#define EXTI_LINE_4 (EXTI_GPIO | 0x04u) /*!< External interrupt line 4 */ -#define EXTI_LINE_5 (EXTI_GPIO | 0x05u) /*!< External interrupt line 5 */ -#define EXTI_LINE_6 (EXTI_GPIO | 0x06u) /*!< External interrupt line 6 */ -#define EXTI_LINE_7 (EXTI_GPIO | 0x07u) /*!< External interrupt line 7 */ -#define EXTI_LINE_8 (EXTI_GPIO | 0x08u) /*!< External interrupt line 8 */ -#define EXTI_LINE_9 (EXTI_GPIO | 0x09u) /*!< External interrupt line 9 */ -#define EXTI_LINE_10 (EXTI_GPIO | 0x0Au) /*!< External interrupt line 10 */ -#define EXTI_LINE_11 (EXTI_GPIO | 0x0Bu) /*!< External interrupt line 11 */ -#define EXTI_LINE_12 (EXTI_GPIO | 0x0Cu) /*!< External interrupt line 12 */ -#define EXTI_LINE_13 (EXTI_GPIO | 0x0Du) /*!< External interrupt line 13 */ -#define EXTI_LINE_14 (EXTI_GPIO | 0x0Eu) /*!< External interrupt line 14 */ -#define EXTI_LINE_15 (EXTI_GPIO | 0x0Fu) /*!< External interrupt line 15 */ -#define EXTI_LINE_16 (EXTI_CONFIG | 0x10u) /*!< External interrupt line 16 Connected to the PVD Output */ -#define EXTI_LINE_17 (EXTI_CONFIG | 0x11u) /*!< External interrupt line 17 Connected to the RTC Alarm event */ -#if defined(EXTI_IMR_IM18) -#define EXTI_LINE_18 (EXTI_CONFIG | 0x12u) /*!< External interrupt line 18 Connected to the USB OTG FS Wakeup from suspend event */ -#else -#define EXTI_LINE_18 (EXTI_RESERVED | 0x12u) /*!< No interrupt supported in this line */ -#endif /* EXTI_IMR_IM18 */ -#if defined(EXTI_IMR_IM19) -#define EXTI_LINE_19 (EXTI_CONFIG | 0x13u) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */ -#else -#define EXTI_LINE_19 (EXTI_RESERVED | 0x13u) /*!< No interrupt supported in this line */ -#endif /* EXTI_IMR_IM19 */ -#if defined(EXTI_IMR_IM20) -#define EXTI_LINE_20 (EXTI_CONFIG | 0x14u) /*!< External interrupt line 20 Connected to the USB OTG HS (configured in FS) Wakeup event */ -#else -#define EXTI_LINE_20 (EXTI_RESERVED | 0x14u) /*!< No interrupt supported in this line */ -#endif /* EXTI_IMR_IM20 */ -#define EXTI_LINE_21 (EXTI_CONFIG | 0x15u) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */ -#define EXTI_LINE_22 (EXTI_CONFIG | 0x16u) /*!< External interrupt line 22 Connected to the RTC Wakeup event */ -#if defined(EXTI_IMR_IM23) -#define EXTI_LINE_23 (EXTI_CONFIG | 0x17u) /*!< External interrupt line 23 Connected to the LPTIM1 asynchronous event */ -#endif /* EXTI_IMR_IM23 */ - -/** - * @} - */ - -/** @defgroup EXTI_Mode EXTI Mode - * @{ - */ -#define EXTI_MODE_NONE 0x00000000u -#define EXTI_MODE_INTERRUPT 0x00000001u -#define EXTI_MODE_EVENT 0x00000002u -/** - * @} - */ - -/** @defgroup EXTI_Trigger EXTI Trigger - * @{ - */ - -#define EXTI_TRIGGER_NONE 0x00000000u -#define EXTI_TRIGGER_RISING 0x00000001u -#define EXTI_TRIGGER_FALLING 0x00000002u -#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) -/** - * @} - */ - -/** @defgroup EXTI_GPIOSel EXTI GPIOSel - * @brief - * @{ - */ -#define EXTI_GPIOA 0x00000000u -#define EXTI_GPIOB 0x00000001u -#define EXTI_GPIOC 0x00000002u -#if defined (GPIOD) -#define EXTI_GPIOD 0x00000003u -#endif /* GPIOD */ -#if defined (GPIOE) -#define EXTI_GPIOE 0x00000004u -#endif /* GPIOE */ -#if defined (GPIOF) -#define EXTI_GPIOF 0x00000005u -#endif /* GPIOF */ -#if defined (GPIOG) -#define EXTI_GPIOG 0x00000006u -#endif /* GPIOG */ -#if defined (GPIOH) -#define EXTI_GPIOH 0x00000007u -#endif /* GPIOH */ -#if defined (GPIOI) -#define EXTI_GPIOI 0x00000008u -#endif /* GPIOI */ -#if defined (GPIOJ) -#define EXTI_GPIOJ 0x00000009u -#endif /* GPIOJ */ -#if defined (GPIOK) -#define EXTI_GPIOK 0x0000000Au -#endif /* GPIOK */ - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup EXTI_Exported_Macros EXTI Exported Macros - * @{ - */ - -/** - * @} - */ - -/* Private constants --------------------------------------------------------*/ -/** @defgroup EXTI_Private_Constants EXTI Private Constants - * @{ - */ -/** - * @brief EXTI Line property definition - */ -#define EXTI_PROPERTY_SHIFT 24u -#define EXTI_CONFIG (0x02uL << EXTI_PROPERTY_SHIFT) -#define EXTI_GPIO ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG) -#define EXTI_RESERVED (0x08uL << EXTI_PROPERTY_SHIFT) -#define EXTI_PROPERTY_MASK (EXTI_CONFIG | EXTI_GPIO) - -/** - * @brief EXTI bit usage - */ -#define EXTI_PIN_MASK 0x0000001Fu - -/** - * @brief EXTI Mask for interrupt & event mode - */ -#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT) - -/** - * @brief EXTI Mask for trigger possibilities - */ -#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) - -/** - * @brief EXTI Line number - */ -#if defined(EXTI_IMR_IM23) -#define EXTI_LINE_NB 24UL -#else -#define EXTI_LINE_NB 23UL -#endif /* EXTI_IMR_IM23 */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup EXTI_Private_Macros EXTI Private Macros - * @{ - */ -#define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_PIN_MASK)) == 0x00u) && \ - ((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \ - (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \ - (((__EXTI_LINE__) & EXTI_PIN_MASK) < EXTI_LINE_NB)) - -#define IS_EXTI_MODE(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_MODE_MASK) != 0x00u) && \ - (((__EXTI_LINE__) & ~EXTI_MODE_MASK) == 0x00u)) - -#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u) - -#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) ((__EXTI_LINE__) == EXTI_TRIGGER_RISING_FALLING) - -#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u) - -#if !defined (GPIOD) -#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ - ((__PORT__) == EXTI_GPIOB) || \ - ((__PORT__) == EXTI_GPIOC) || \ - ((__PORT__) == EXTI_GPIOH)) -#elif !defined (GPIOE) -#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ - ((__PORT__) == EXTI_GPIOB) || \ - ((__PORT__) == EXTI_GPIOC) || \ - ((__PORT__) == EXTI_GPIOD) || \ - ((__PORT__) == EXTI_GPIOH)) -#elif !defined (GPIOF) -#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ - ((__PORT__) == EXTI_GPIOB) || \ - ((__PORT__) == EXTI_GPIOC) || \ - ((__PORT__) == EXTI_GPIOD) || \ - ((__PORT__) == EXTI_GPIOE) || \ - ((__PORT__) == EXTI_GPIOH)) -#elif !defined (GPIOI) -#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ - ((__PORT__) == EXTI_GPIOB) || \ - ((__PORT__) == EXTI_GPIOC) || \ - ((__PORT__) == EXTI_GPIOD) || \ - ((__PORT__) == EXTI_GPIOE) || \ - ((__PORT__) == EXTI_GPIOF) || \ - ((__PORT__) == EXTI_GPIOG) || \ - ((__PORT__) == EXTI_GPIOH)) -#elif !defined (GPIOJ) -#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ - ((__PORT__) == EXTI_GPIOB) || \ - ((__PORT__) == EXTI_GPIOC) || \ - ((__PORT__) == EXTI_GPIOD) || \ - ((__PORT__) == EXTI_GPIOE) || \ - ((__PORT__) == EXTI_GPIOF) || \ - ((__PORT__) == EXTI_GPIOG) || \ - ((__PORT__) == EXTI_GPIOH) || \ - ((__PORT__) == EXTI_GPIOI)) -#else -#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ - ((__PORT__) == EXTI_GPIOB) || \ - ((__PORT__) == EXTI_GPIOC) || \ - ((__PORT__) == EXTI_GPIOD) || \ - ((__PORT__) == EXTI_GPIOE) || \ - ((__PORT__) == EXTI_GPIOF) || \ - ((__PORT__) == EXTI_GPIOG) || \ - ((__PORT__) == EXTI_GPIOH) || \ - ((__PORT__) == EXTI_GPIOI) || \ - ((__PORT__) == EXTI_GPIOJ) || \ - ((__PORT__) == EXTI_GPIOK)) -#endif /* GPIOD */ - -#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16U) -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup EXTI_Exported_Functions EXTI Exported Functions - * @brief EXTI Exported Functions - * @{ - */ - -/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions - * @brief Configuration functions - * @{ - */ -/* Configuration functions ****************************************************/ -HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); -HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); -HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti); -HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)); -HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine); -/** - * @} - */ - -/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions - * @brief IO operation functions - * @{ - */ -/* IO operation functions *****************************************************/ -void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti); -uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); -void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); -void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32f4xx_HAL_EXTI_H */ - +/** + ****************************************************************************** + * @file stm32f4xx_hal_exti.h + * @author MCD Application Team + * @brief Header file of EXTI HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS.Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32f4xx_HAL_EXTI_H +#define STM32f4xx_HAL_EXTI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup EXTI EXTI + * @brief EXTI HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup EXTI_Exported_Types EXTI Exported Types + * @{ + */ +typedef enum +{ + HAL_EXTI_COMMON_CB_ID = 0x00U +} EXTI_CallbackIDTypeDef; + +/** + * @brief EXTI Handle structure definition + */ +typedef struct +{ + uint32_t Line; /*!< Exti line number */ + void (* PendingCallback)(void); /*!< Exti pending callback */ +} EXTI_HandleTypeDef; + +/** + * @brief EXTI Configuration structure definition + */ +typedef struct +{ + uint32_t Line; /*!< The Exti line to be configured. This parameter + can be a value of @ref EXTI_Line */ + uint32_t Mode; /*!< The Exit Mode to be configured for a core. + This parameter can be a combination of @ref EXTI_Mode */ + uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter + can be a value of @ref EXTI_Trigger */ + uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured. + This parameter is only possible for line 0 to 15. It + can be a value of @ref EXTI_GPIOSel */ +} EXTI_ConfigTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Constants EXTI Exported Constants + * @{ + */ + +/** @defgroup EXTI_Line EXTI Line + * @{ + */ +#define EXTI_LINE_0 (EXTI_GPIO | 0x00u) /*!< External interrupt line 0 */ +#define EXTI_LINE_1 (EXTI_GPIO | 0x01u) /*!< External interrupt line 1 */ +#define EXTI_LINE_2 (EXTI_GPIO | 0x02u) /*!< External interrupt line 2 */ +#define EXTI_LINE_3 (EXTI_GPIO | 0x03u) /*!< External interrupt line 3 */ +#define EXTI_LINE_4 (EXTI_GPIO | 0x04u) /*!< External interrupt line 4 */ +#define EXTI_LINE_5 (EXTI_GPIO | 0x05u) /*!< External interrupt line 5 */ +#define EXTI_LINE_6 (EXTI_GPIO | 0x06u) /*!< External interrupt line 6 */ +#define EXTI_LINE_7 (EXTI_GPIO | 0x07u) /*!< External interrupt line 7 */ +#define EXTI_LINE_8 (EXTI_GPIO | 0x08u) /*!< External interrupt line 8 */ +#define EXTI_LINE_9 (EXTI_GPIO | 0x09u) /*!< External interrupt line 9 */ +#define EXTI_LINE_10 (EXTI_GPIO | 0x0Au) /*!< External interrupt line 10 */ +#define EXTI_LINE_11 (EXTI_GPIO | 0x0Bu) /*!< External interrupt line 11 */ +#define EXTI_LINE_12 (EXTI_GPIO | 0x0Cu) /*!< External interrupt line 12 */ +#define EXTI_LINE_13 (EXTI_GPIO | 0x0Du) /*!< External interrupt line 13 */ +#define EXTI_LINE_14 (EXTI_GPIO | 0x0Eu) /*!< External interrupt line 14 */ +#define EXTI_LINE_15 (EXTI_GPIO | 0x0Fu) /*!< External interrupt line 15 */ +#define EXTI_LINE_16 (EXTI_CONFIG | 0x10u) /*!< External interrupt line 16 Connected to the PVD Output */ +#define EXTI_LINE_17 (EXTI_CONFIG | 0x11u) /*!< External interrupt line 17 Connected to the RTC Alarm event */ +#if defined(EXTI_IMR_IM18) +#define EXTI_LINE_18 (EXTI_CONFIG | 0x12u) /*!< External interrupt line 18 Connected to the USB OTG FS Wakeup from suspend event */ +#else +#define EXTI_LINE_18 (EXTI_RESERVED | 0x12u) /*!< No interrupt supported in this line */ +#endif /* EXTI_IMR_IM18 */ +#if defined(EXTI_IMR_IM19) +#define EXTI_LINE_19 (EXTI_CONFIG | 0x13u) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */ +#else +#define EXTI_LINE_19 (EXTI_RESERVED | 0x13u) /*!< No interrupt supported in this line */ +#endif /* EXTI_IMR_IM19 */ +#if defined(EXTI_IMR_IM20) +#define EXTI_LINE_20 (EXTI_CONFIG | 0x14u) /*!< External interrupt line 20 Connected to the USB OTG HS (configured in FS) Wakeup event */ +#else +#define EXTI_LINE_20 (EXTI_RESERVED | 0x14u) /*!< No interrupt supported in this line */ +#endif /* EXTI_IMR_IM20 */ +#define EXTI_LINE_21 (EXTI_CONFIG | 0x15u) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */ +#define EXTI_LINE_22 (EXTI_CONFIG | 0x16u) /*!< External interrupt line 22 Connected to the RTC Wakeup event */ +#if defined(EXTI_IMR_IM23) +#define EXTI_LINE_23 (EXTI_CONFIG | 0x17u) /*!< External interrupt line 23 Connected to the LPTIM1 asynchronous event */ +#endif /* EXTI_IMR_IM23 */ + +/** + * @} + */ + +/** @defgroup EXTI_Mode EXTI Mode + * @{ + */ +#define EXTI_MODE_NONE 0x00000000u +#define EXTI_MODE_INTERRUPT 0x00000001u +#define EXTI_MODE_EVENT 0x00000002u +/** + * @} + */ + +/** @defgroup EXTI_Trigger EXTI Trigger + * @{ + */ + +#define EXTI_TRIGGER_NONE 0x00000000u +#define EXTI_TRIGGER_RISING 0x00000001u +#define EXTI_TRIGGER_FALLING 0x00000002u +#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) +/** + * @} + */ + +/** @defgroup EXTI_GPIOSel EXTI GPIOSel + * @brief + * @{ + */ +#define EXTI_GPIOA 0x00000000u +#define EXTI_GPIOB 0x00000001u +#define EXTI_GPIOC 0x00000002u +#if defined (GPIOD) +#define EXTI_GPIOD 0x00000003u +#endif /* GPIOD */ +#if defined (GPIOE) +#define EXTI_GPIOE 0x00000004u +#endif /* GPIOE */ +#if defined (GPIOF) +#define EXTI_GPIOF 0x00000005u +#endif /* GPIOF */ +#if defined (GPIOG) +#define EXTI_GPIOG 0x00000006u +#endif /* GPIOG */ +#if defined (GPIOH) +#define EXTI_GPIOH 0x00000007u +#endif /* GPIOH */ +#if defined (GPIOI) +#define EXTI_GPIOI 0x00000008u +#endif /* GPIOI */ +#if defined (GPIOJ) +#define EXTI_GPIOJ 0x00000009u +#endif /* GPIOJ */ +#if defined (GPIOK) +#define EXTI_GPIOK 0x0000000Au +#endif /* GPIOK */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Macros EXTI Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Private constants --------------------------------------------------------*/ +/** @defgroup EXTI_Private_Constants EXTI Private Constants + * @{ + */ +/** + * @brief EXTI Line property definition + */ +#define EXTI_PROPERTY_SHIFT 24u +#define EXTI_CONFIG (0x02uL << EXTI_PROPERTY_SHIFT) +#define EXTI_GPIO ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG) +#define EXTI_RESERVED (0x08uL << EXTI_PROPERTY_SHIFT) +#define EXTI_PROPERTY_MASK (EXTI_CONFIG | EXTI_GPIO) + +/** + * @brief EXTI bit usage + */ +#define EXTI_PIN_MASK 0x0000001Fu + +/** + * @brief EXTI Mask for interrupt & event mode + */ +#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT) + +/** + * @brief EXTI Mask for trigger possibilities + */ +#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) + +/** + * @brief EXTI Line number + */ +#if defined(EXTI_IMR_IM23) +#define EXTI_LINE_NB 24UL +#else +#define EXTI_LINE_NB 23UL +#endif /* EXTI_IMR_IM23 */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup EXTI_Private_Macros EXTI Private Macros + * @{ + */ +#define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_PIN_MASK)) == 0x00u) && \ + ((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \ + (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \ + (((__EXTI_LINE__) & EXTI_PIN_MASK) < EXTI_LINE_NB)) + +#define IS_EXTI_MODE(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_MODE_MASK) != 0x00u) && \ + (((__EXTI_LINE__) & ~EXTI_MODE_MASK) == 0x00u)) + +#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u) + +#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) ((__EXTI_LINE__) == EXTI_TRIGGER_RISING_FALLING) + +#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u) + +#if !defined (GPIOD) +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOH)) +#elif !defined (GPIOE) +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOH)) +#elif !defined (GPIOF) +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE) || \ + ((__PORT__) == EXTI_GPIOH)) +#elif !defined (GPIOI) +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE) || \ + ((__PORT__) == EXTI_GPIOF) || \ + ((__PORT__) == EXTI_GPIOG) || \ + ((__PORT__) == EXTI_GPIOH)) +#elif !defined (GPIOJ) +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE) || \ + ((__PORT__) == EXTI_GPIOF) || \ + ((__PORT__) == EXTI_GPIOG) || \ + ((__PORT__) == EXTI_GPIOH) || \ + ((__PORT__) == EXTI_GPIOI)) +#else +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE) || \ + ((__PORT__) == EXTI_GPIOF) || \ + ((__PORT__) == EXTI_GPIOG) || \ + ((__PORT__) == EXTI_GPIOH) || \ + ((__PORT__) == EXTI_GPIOI) || \ + ((__PORT__) == EXTI_GPIOJ) || \ + ((__PORT__) == EXTI_GPIOK)) +#endif /* GPIOD */ + +#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16U) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Functions EXTI Exported Functions + * @brief EXTI Exported Functions + * @{ + */ + +/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions + * @brief Configuration functions + * @{ + */ +/* Configuration functions ****************************************************/ +HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); +HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); +HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti); +HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)); +HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine); +/** + * @} + */ + +/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * @{ + */ +/* IO operation functions *****************************************************/ +void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti); +uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32f4xx_HAL_EXTI_H */ + diff --git a/Drivers/stm32f4xx_hal_flash.c b/libs/hal/stm32f4xx_hal_flash.c similarity index 96% rename from Drivers/stm32f4xx_hal_flash.c rename to libs/hal/stm32f4xx_hal_flash.c index d18f66f..2830da0 100644 --- a/Drivers/stm32f4xx_hal_flash.c +++ b/libs/hal/stm32f4xx_hal_flash.c @@ -1,775 +1,775 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_flash.c - * @author MCD Application Team - * @brief FLASH HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the internal FLASH memory: - * + Program operations functions - * + Memory Control functions - * + Peripheral Errors functions - * - @verbatim - ============================================================================== - ##### FLASH peripheral features ##### - ============================================================================== - - [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses - to the Flash memory. It implements the erase and program Flash memory operations - and the read and write protection mechanisms. - - [..] The Flash memory interface accelerates code execution with a system of instruction - prefetch and cache lines. - - [..] The FLASH main features are: - (+) Flash memory read operations - (+) Flash memory program/erase operations - (+) Read / write protections - (+) Prefetch on I-Code - (+) 64 cache lines of 128 bits on I-Code - (+) 8 cache lines of 128 bits on D-Code - - - ##### How to use this driver ##### - ============================================================================== - [..] - This driver provides functions and macros to configure and program the FLASH - memory of all STM32F4xx devices. - - (#) FLASH Memory IO Programming functions: - (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and - HAL_FLASH_Lock() functions - (++) Program functions: byte, half word, word and double word - (++) There Two modes of programming : - (+++) Polling mode using HAL_FLASH_Program() function - (+++) Interrupt mode using HAL_FLASH_Program_IT() function - - (#) Interrupts and flags management functions : - (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler() - (++) Wait for last FLASH operation according to its status - (++) Get error flag status by calling HAL_SetErrorCode() - - [..] - In addition to these functions, this driver includes a set of macros allowing - to handle the following operations: - (+) Set the latency - (+) Enable/Disable the prefetch buffer - (+) Enable/Disable the Instruction cache and the Data cache - (+) Reset the Instruction cache and the Data cache - (+) Enable/Disable the FLASH interrupts - (+) Monitor the FLASH flags status - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup FLASH FLASH - * @brief FLASH HAL module driver - * @{ - */ - -#ifdef HAL_FLASH_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup FLASH_Private_Constants - * @{ - */ -#define FLASH_TIMEOUT_VALUE 50000U /* 50 s */ -/** - * @} - */ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @addtogroup FLASH_Private_Variables - * @{ - */ -/* Variable used for Erase sectors under interruption */ -FLASH_ProcessTypeDef pFlash; -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ -/** @addtogroup FLASH_Private_Functions - * @{ - */ -/* Program operations */ -static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data); -static void FLASH_Program_Word(uint32_t Address, uint32_t Data); -static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data); -static void FLASH_Program_Byte(uint32_t Address, uint8_t Data); -static void FLASH_SetErrorCode(void); - -HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup FLASH_Exported_Functions FLASH Exported Functions - * @{ - */ - -/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions - * @brief Programming operation functions - * -@verbatim - =============================================================================== - ##### Programming operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the FLASH - program operations. - -@endverbatim - * @{ - */ - -/** - * @brief Program byte, halfword, word or double word at a specified address - * @param TypeProgram Indicate the way to program at a specified address. - * This parameter can be a value of @ref FLASH_Type_Program - * @param Address specifies the address to be programmed. - * @param Data specifies the data to be programmed - * - * @retval HAL_StatusTypeDef HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data) -{ - HAL_StatusTypeDef status = HAL_ERROR; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - if(TypeProgram == FLASH_TYPEPROGRAM_BYTE) - { - /*Program byte (8-bit) at a specified address.*/ - FLASH_Program_Byte(Address, (uint8_t) Data); - } - else if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD) - { - /*Program halfword (16-bit) at a specified address.*/ - FLASH_Program_HalfWord(Address, (uint16_t) Data); - } - else if(TypeProgram == FLASH_TYPEPROGRAM_WORD) - { - /*Program word (32-bit) at a specified address.*/ - FLASH_Program_Word(Address, (uint32_t) Data); - } - else - { - /*Program double word (64-bit) at a specified address.*/ - FLASH_Program_DoubleWord(Address, Data); - } - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - /* If the program operation is completed, disable the PG Bit */ - FLASH->CR &= (~FLASH_CR_PG); - } - - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - - return status; -} - -/** - * @brief Program byte, halfword, word or double word at a specified address with interrupt enabled. - * @param TypeProgram Indicate the way to program at a specified address. - * This parameter can be a value of @ref FLASH_Type_Program - * @param Address specifies the address to be programmed. - * @param Data specifies the data to be programmed - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); - - /* Enable End of FLASH Operation interrupt */ - __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP); - - /* Enable Error source interrupt */ - __HAL_FLASH_ENABLE_IT(FLASH_IT_ERR); - - pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM; - pFlash.Address = Address; - - if(TypeProgram == FLASH_TYPEPROGRAM_BYTE) - { - /*Program byte (8-bit) at a specified address.*/ - FLASH_Program_Byte(Address, (uint8_t) Data); - } - else if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD) - { - /*Program halfword (16-bit) at a specified address.*/ - FLASH_Program_HalfWord(Address, (uint16_t) Data); - } - else if(TypeProgram == FLASH_TYPEPROGRAM_WORD) - { - /*Program word (32-bit) at a specified address.*/ - FLASH_Program_Word(Address, (uint32_t) Data); - } - else - { - /*Program double word (64-bit) at a specified address.*/ - FLASH_Program_DoubleWord(Address, Data); - } - - return status; -} - -/** - * @brief This function handles FLASH interrupt request. - * @retval None - */ -void HAL_FLASH_IRQHandler(void) -{ - uint32_t addresstmp = 0U; - - /* Check FLASH operation error flags */ -#if defined(FLASH_SR_RDERR) - if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \ - FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)) != RESET) -#else - if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \ - FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR)) != RESET) -#endif /* FLASH_SR_RDERR */ - { - if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE) - { - /*return the faulty sector*/ - addresstmp = pFlash.Sector; - pFlash.Sector = 0xFFFFFFFFU; - } - else if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE) - { - /*return the faulty bank*/ - addresstmp = pFlash.Bank; - } - else - { - /*return the faulty address*/ - addresstmp = pFlash.Address; - } - - /*Save the Error code*/ - FLASH_SetErrorCode(); - - /* FLASH error interrupt user callback */ - HAL_FLASH_OperationErrorCallback(addresstmp); - - /*Stop the procedure ongoing*/ - pFlash.ProcedureOnGoing = FLASH_PROC_NONE; - } - - /* Check FLASH End of Operation flag */ - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET) - { - /* Clear FLASH End of Operation pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); - - if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE) - { - /*Nb of sector to erased can be decreased*/ - pFlash.NbSectorsToErase--; - - /* Check if there are still sectors to erase*/ - if(pFlash.NbSectorsToErase != 0U) - { - addresstmp = pFlash.Sector; - /*Indicate user which sector has been erased*/ - HAL_FLASH_EndOfOperationCallback(addresstmp); - - /*Increment sector number*/ - pFlash.Sector++; - addresstmp = pFlash.Sector; - FLASH_Erase_Sector(addresstmp, pFlash.VoltageForErase); - } - else - { - /*No more sectors to Erase, user callback can be called.*/ - /*Reset Sector and stop Erase sectors procedure*/ - pFlash.Sector = addresstmp = 0xFFFFFFFFU; - pFlash.ProcedureOnGoing = FLASH_PROC_NONE; - - /* Flush the caches to be sure of the data consistency */ - FLASH_FlushCaches() ; - - /* FLASH EOP interrupt user callback */ - HAL_FLASH_EndOfOperationCallback(addresstmp); - } - } - else - { - if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE) - { - /* MassErase ended. Return the selected bank */ - /* Flush the caches to be sure of the data consistency */ - FLASH_FlushCaches() ; - - /* FLASH EOP interrupt user callback */ - HAL_FLASH_EndOfOperationCallback(pFlash.Bank); - } - else - { - /*Program ended. Return the selected address*/ - /* FLASH EOP interrupt user callback */ - HAL_FLASH_EndOfOperationCallback(pFlash.Address); - } - pFlash.ProcedureOnGoing = FLASH_PROC_NONE; - } - } - - if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE) - { - /* Operation is completed, disable the PG, SER, SNB and MER Bits */ - CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_SER | FLASH_CR_SNB | FLASH_MER_BIT)); - - /* Disable End of FLASH Operation interrupt */ - __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP); - - /* Disable Error source interrupt */ - __HAL_FLASH_DISABLE_IT(FLASH_IT_ERR); - - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - } -} - -/** - * @brief FLASH end of operation interrupt callback - * @param ReturnValue The value saved in this parameter depends on the ongoing procedure - * Mass Erase: Bank number which has been requested to erase - * Sectors Erase: Sector which has been erased - * (if 0xFFFFFFFFU, it means that all the selected sectors have been erased) - * Program: Address which was selected for data program - * @retval None - */ -__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(ReturnValue); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_FLASH_EndOfOperationCallback could be implemented in the user file - */ -} - -/** - * @brief FLASH operation error interrupt callback - * @param ReturnValue The value saved in this parameter depends on the ongoing procedure - * Mass Erase: Bank number which has been requested to erase - * Sectors Erase: Sector number which returned an error - * Program: Address which was selected for data program - * @retval None - */ -__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(ReturnValue); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_FLASH_OperationErrorCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions - * @brief management functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the FLASH - memory operations. - -@endverbatim - * @{ - */ - -/** - * @brief Unlock the FLASH control register access - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_Unlock(void) -{ - HAL_StatusTypeDef status = HAL_OK; - - if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET) - { - /* Authorize the FLASH Registers access */ - WRITE_REG(FLASH->KEYR, FLASH_KEY1); - WRITE_REG(FLASH->KEYR, FLASH_KEY2); - - /* Verify Flash is unlocked */ - if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET) - { - status = HAL_ERROR; - } - } - - return status; -} - -/** - * @brief Locks the FLASH control register access - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_Lock(void) -{ - /* Set the LOCK Bit to lock the FLASH Registers access */ - FLASH->CR |= FLASH_CR_LOCK; - - return HAL_OK; -} - -/** - * @brief Unlock the FLASH Option Control Registers access. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void) -{ - if((FLASH->OPTCR & FLASH_OPTCR_OPTLOCK) != RESET) - { - /* Authorizes the Option Byte register programming */ - FLASH->OPTKEYR = FLASH_OPT_KEY1; - FLASH->OPTKEYR = FLASH_OPT_KEY2; - } - else - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief Lock the FLASH Option Control Registers access. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_OB_Lock(void) -{ - /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */ - FLASH->OPTCR |= FLASH_OPTCR_OPTLOCK; - - return HAL_OK; -} - -/** - * @brief Launch the option byte loading. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_OB_Launch(void) -{ - /* Set the OPTSTRT bit in OPTCR register */ - *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= FLASH_OPTCR_OPTSTRT; - - /* Wait for last operation to be completed */ - return(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE)); -} - -/** - * @} - */ - -/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions - * @brief Peripheral Errors functions - * -@verbatim - =============================================================================== - ##### Peripheral Errors functions ##### - =============================================================================== - [..] - This subsection permits to get in run-time Errors of the FLASH peripheral. - -@endverbatim - * @{ - */ - -/** - * @brief Get the specific FLASH error flag. - * @retval FLASH_ErrorCode: The returned value can be a combination of: - * @arg HAL_FLASH_ERROR_RD: FLASH Read Protection error flag (PCROP) - * @arg HAL_FLASH_ERROR_PGS: FLASH Programming Sequence error flag - * @arg HAL_FLASH_ERROR_PGP: FLASH Programming Parallelism error flag - * @arg HAL_FLASH_ERROR_PGA: FLASH Programming Alignment error flag - * @arg HAL_FLASH_ERROR_WRP: FLASH Write protected error flag - * @arg HAL_FLASH_ERROR_OPERATION: FLASH operation Error flag - */ -uint32_t HAL_FLASH_GetError(void) -{ - return pFlash.ErrorCode; -} - -/** - * @} - */ - -/** - * @brief Wait for a FLASH operation to complete. - * @param Timeout maximum flash operationtimeout - * @retval HAL Status - */ -HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout) -{ - uint32_t tickstart = 0U; - - /* Clear Error Code */ - pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; - - /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset. - Even if the FLASH operation fails, the BUSY flag will be reset and an error - flag will be set */ - /* Get tick */ - tickstart = HAL_GetTick(); - - while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) != RESET) - { - if(Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout)) - { - return HAL_TIMEOUT; - } - } - } - - /* Check FLASH End of Operation flag */ - if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET) - { - /* Clear FLASH End of Operation pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); - } -#if defined(FLASH_SR_RDERR) - if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \ - FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)) != RESET) -#else - if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \ - FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR)) != RESET) -#endif /* FLASH_SR_RDERR */ - { - /*Save the error code*/ - FLASH_SetErrorCode(); - return HAL_ERROR; - } - - /* If there is no error flag set */ - return HAL_OK; - -} - -/** - * @brief Program a double word (64-bit) at a specified address. - * @note This function must be used when the device voltage range is from - * 2.7V to 3.6V and Vpp in the range 7V to 9V. - * - * @note If an erase and a program operations are requested simultaneously, - * the erase operation is performed before the program one. - * - * @param Address specifies the address to be programmed. - * @param Data specifies the data to be programmed. - * @retval None - */ -static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data) -{ - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - - /* If the previous operation is completed, proceed to program the new data */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); - FLASH->CR |= FLASH_PSIZE_DOUBLE_WORD; - FLASH->CR |= FLASH_CR_PG; - - /* Program first word */ - *(__IO uint32_t*)Address = (uint32_t)Data; - - /* Barrier to ensure programming is performed in 2 steps, in right order - (independently of compiler optimization behavior) */ - __ISB(); - - /* Program second word */ - *(__IO uint32_t*)(Address+4) = (uint32_t)(Data >> 32); -} - - -/** - * @brief Program word (32-bit) at a specified address. - * @note This function must be used when the device voltage range is from - * 2.7V to 3.6V. - * - * @note If an erase and a program operations are requested simultaneously, - * the erase operation is performed before the program one. - * - * @param Address specifies the address to be programmed. - * @param Data specifies the data to be programmed. - * @retval None - */ -static void FLASH_Program_Word(uint32_t Address, uint32_t Data) -{ - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - - /* If the previous operation is completed, proceed to program the new data */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); - FLASH->CR |= FLASH_PSIZE_WORD; - FLASH->CR |= FLASH_CR_PG; - - *(__IO uint32_t*)Address = Data; -} - -/** - * @brief Program a half-word (16-bit) at a specified address. - * @note This function must be used when the device voltage range is from - * 2.1V to 3.6V. - * - * @note If an erase and a program operations are requested simultaneously, - * the erase operation is performed before the program one. - * - * @param Address specifies the address to be programmed. - * @param Data specifies the data to be programmed. - * @retval None - */ -static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data) -{ - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - - /* If the previous operation is completed, proceed to program the new data */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); - FLASH->CR |= FLASH_PSIZE_HALF_WORD; - FLASH->CR |= FLASH_CR_PG; - - *(__IO uint16_t*)Address = Data; -} - -/** - * @brief Program byte (8-bit) at a specified address. - * @note This function must be used when the device voltage range is from - * 1.8V to 3.6V. - * - * @note If an erase and a program operations are requested simultaneously, - * the erase operation is performed before the program one. - * - * @param Address specifies the address to be programmed. - * @param Data specifies the data to be programmed. - * @retval None - */ -static void FLASH_Program_Byte(uint32_t Address, uint8_t Data) -{ - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - - /* If the previous operation is completed, proceed to program the new data */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); - FLASH->CR |= FLASH_PSIZE_BYTE; - FLASH->CR |= FLASH_CR_PG; - - *(__IO uint8_t*)Address = Data; -} - -/** - * @brief Set the specific FLASH error flag. - * @retval None - */ -static void FLASH_SetErrorCode(void) -{ - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) != RESET) - { - pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP; - - /* Clear FLASH write protection error pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_WRPERR); - } - - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR) != RESET) - { - pFlash.ErrorCode |= HAL_FLASH_ERROR_PGA; - - /* Clear FLASH Programming alignment error pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGAERR); - } - - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGPERR) != RESET) - { - pFlash.ErrorCode |= HAL_FLASH_ERROR_PGP; - - /* Clear FLASH Programming parallelism error pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGPERR); - } - - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGSERR) != RESET) - { - pFlash.ErrorCode |= HAL_FLASH_ERROR_PGS; - - /* Clear FLASH Programming sequence error pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGSERR); - } -#if defined(FLASH_SR_RDERR) - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR) != RESET) - { - pFlash.ErrorCode |= HAL_FLASH_ERROR_RD; - - /* Clear FLASH Proprietary readout protection error pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_RDERR); - } -#endif /* FLASH_SR_RDERR */ - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPERR) != RESET) - { - pFlash.ErrorCode |= HAL_FLASH_ERROR_OPERATION; - - /* Clear FLASH Operation error pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_OPERR); - } -} - -/** - * @} - */ - -#endif /* HAL_FLASH_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - +/** + ****************************************************************************** + * @file stm32f4xx_hal_flash.c + * @author MCD Application Team + * @brief FLASH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the internal FLASH memory: + * + Program operations functions + * + Memory Control functions + * + Peripheral Errors functions + * + @verbatim + ============================================================================== + ##### FLASH peripheral features ##### + ============================================================================== + + [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses + to the Flash memory. It implements the erase and program Flash memory operations + and the read and write protection mechanisms. + + [..] The Flash memory interface accelerates code execution with a system of instruction + prefetch and cache lines. + + [..] The FLASH main features are: + (+) Flash memory read operations + (+) Flash memory program/erase operations + (+) Read / write protections + (+) Prefetch on I-Code + (+) 64 cache lines of 128 bits on I-Code + (+) 8 cache lines of 128 bits on D-Code + + + ##### How to use this driver ##### + ============================================================================== + [..] + This driver provides functions and macros to configure and program the FLASH + memory of all STM32F4xx devices. + + (#) FLASH Memory IO Programming functions: + (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and + HAL_FLASH_Lock() functions + (++) Program functions: byte, half word, word and double word + (++) There Two modes of programming : + (+++) Polling mode using HAL_FLASH_Program() function + (+++) Interrupt mode using HAL_FLASH_Program_IT() function + + (#) Interrupts and flags management functions : + (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler() + (++) Wait for last FLASH operation according to its status + (++) Get error flag status by calling HAL_SetErrorCode() + + [..] + In addition to these functions, this driver includes a set of macros allowing + to handle the following operations: + (+) Set the latency + (+) Enable/Disable the prefetch buffer + (+) Enable/Disable the Instruction cache and the Data cache + (+) Reset the Instruction cache and the Data cache + (+) Enable/Disable the FLASH interrupts + (+) Monitor the FLASH flags status + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup FLASH FLASH + * @brief FLASH HAL module driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup FLASH_Private_Constants + * @{ + */ +#define FLASH_TIMEOUT_VALUE 50000U /* 50 s */ +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @addtogroup FLASH_Private_Variables + * @{ + */ +/* Variable used for Erase sectors under interruption */ +FLASH_ProcessTypeDef pFlash; +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup FLASH_Private_Functions + * @{ + */ +/* Program operations */ +static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data); +static void FLASH_Program_Word(uint32_t Address, uint32_t Data); +static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data); +static void FLASH_Program_Byte(uint32_t Address, uint8_t Data); +static void FLASH_SetErrorCode(void); + +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Functions FLASH Exported Functions + * @{ + */ + +/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions + * @brief Programming operation functions + * +@verbatim + =============================================================================== + ##### Programming operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the FLASH + program operations. + +@endverbatim + * @{ + */ + +/** + * @brief Program byte, halfword, word or double word at a specified address + * @param TypeProgram Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param Address specifies the address to be programmed. + * @param Data specifies the data to be programmed + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + if(TypeProgram == FLASH_TYPEPROGRAM_BYTE) + { + /*Program byte (8-bit) at a specified address.*/ + FLASH_Program_Byte(Address, (uint8_t) Data); + } + else if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD) + { + /*Program halfword (16-bit) at a specified address.*/ + FLASH_Program_HalfWord(Address, (uint16_t) Data); + } + else if(TypeProgram == FLASH_TYPEPROGRAM_WORD) + { + /*Program word (32-bit) at a specified address.*/ + FLASH_Program_Word(Address, (uint32_t) Data); + } + else + { + /*Program double word (64-bit) at a specified address.*/ + FLASH_Program_DoubleWord(Address, Data); + } + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the program operation is completed, disable the PG Bit */ + FLASH->CR &= (~FLASH_CR_PG); + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Program byte, halfword, word or double word at a specified address with interrupt enabled. + * @param TypeProgram Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param Address specifies the address to be programmed. + * @param Data specifies the data to be programmed + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + + /* Enable End of FLASH Operation interrupt */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP); + + /* Enable Error source interrupt */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_ERR); + + pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM; + pFlash.Address = Address; + + if(TypeProgram == FLASH_TYPEPROGRAM_BYTE) + { + /*Program byte (8-bit) at a specified address.*/ + FLASH_Program_Byte(Address, (uint8_t) Data); + } + else if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD) + { + /*Program halfword (16-bit) at a specified address.*/ + FLASH_Program_HalfWord(Address, (uint16_t) Data); + } + else if(TypeProgram == FLASH_TYPEPROGRAM_WORD) + { + /*Program word (32-bit) at a specified address.*/ + FLASH_Program_Word(Address, (uint32_t) Data); + } + else + { + /*Program double word (64-bit) at a specified address.*/ + FLASH_Program_DoubleWord(Address, Data); + } + + return status; +} + +/** + * @brief This function handles FLASH interrupt request. + * @retval None + */ +void HAL_FLASH_IRQHandler(void) +{ + uint32_t addresstmp = 0U; + + /* Check FLASH operation error flags */ +#if defined(FLASH_SR_RDERR) + if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \ + FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)) != RESET) +#else + if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \ + FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR)) != RESET) +#endif /* FLASH_SR_RDERR */ + { + if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE) + { + /*return the faulty sector*/ + addresstmp = pFlash.Sector; + pFlash.Sector = 0xFFFFFFFFU; + } + else if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE) + { + /*return the faulty bank*/ + addresstmp = pFlash.Bank; + } + else + { + /*return the faulty address*/ + addresstmp = pFlash.Address; + } + + /*Save the Error code*/ + FLASH_SetErrorCode(); + + /* FLASH error interrupt user callback */ + HAL_FLASH_OperationErrorCallback(addresstmp); + + /*Stop the procedure ongoing*/ + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + } + + /* Check FLASH End of Operation flag */ + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); + + if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE) + { + /*Nb of sector to erased can be decreased*/ + pFlash.NbSectorsToErase--; + + /* Check if there are still sectors to erase*/ + if(pFlash.NbSectorsToErase != 0U) + { + addresstmp = pFlash.Sector; + /*Indicate user which sector has been erased*/ + HAL_FLASH_EndOfOperationCallback(addresstmp); + + /*Increment sector number*/ + pFlash.Sector++; + addresstmp = pFlash.Sector; + FLASH_Erase_Sector(addresstmp, pFlash.VoltageForErase); + } + else + { + /*No more sectors to Erase, user callback can be called.*/ + /*Reset Sector and stop Erase sectors procedure*/ + pFlash.Sector = addresstmp = 0xFFFFFFFFU; + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + + /* Flush the caches to be sure of the data consistency */ + FLASH_FlushCaches() ; + + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(addresstmp); + } + } + else + { + if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE) + { + /* MassErase ended. Return the selected bank */ + /* Flush the caches to be sure of the data consistency */ + FLASH_FlushCaches() ; + + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(pFlash.Bank); + } + else + { + /*Program ended. Return the selected address*/ + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(pFlash.Address); + } + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + } + } + + if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE) + { + /* Operation is completed, disable the PG, SER, SNB and MER Bits */ + CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_SER | FLASH_CR_SNB | FLASH_MER_BIT)); + + /* Disable End of FLASH Operation interrupt */ + __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP); + + /* Disable Error source interrupt */ + __HAL_FLASH_DISABLE_IT(FLASH_IT_ERR); + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } +} + +/** + * @brief FLASH end of operation interrupt callback + * @param ReturnValue The value saved in this parameter depends on the ongoing procedure + * Mass Erase: Bank number which has been requested to erase + * Sectors Erase: Sector which has been erased + * (if 0xFFFFFFFFU, it means that all the selected sectors have been erased) + * Program: Address which was selected for data program + * @retval None + */ +__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FLASH_EndOfOperationCallback could be implemented in the user file + */ +} + +/** + * @brief FLASH operation error interrupt callback + * @param ReturnValue The value saved in this parameter depends on the ongoing procedure + * Mass Erase: Bank number which has been requested to erase + * Sectors Erase: Sector number which returned an error + * Program: Address which was selected for data program + * @retval None + */ +__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FLASH_OperationErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions + * @brief management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the FLASH + memory operations. + +@endverbatim + * @{ + */ + +/** + * @brief Unlock the FLASH control register access + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Unlock(void) +{ + HAL_StatusTypeDef status = HAL_OK; + + if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET) + { + /* Authorize the FLASH Registers access */ + WRITE_REG(FLASH->KEYR, FLASH_KEY1); + WRITE_REG(FLASH->KEYR, FLASH_KEY2); + + /* Verify Flash is unlocked */ + if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET) + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Locks the FLASH control register access + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Lock(void) +{ + /* Set the LOCK Bit to lock the FLASH Registers access */ + FLASH->CR |= FLASH_CR_LOCK; + + return HAL_OK; +} + +/** + * @brief Unlock the FLASH Option Control Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void) +{ + if((FLASH->OPTCR & FLASH_OPTCR_OPTLOCK) != RESET) + { + /* Authorizes the Option Byte register programming */ + FLASH->OPTKEYR = FLASH_OPT_KEY1; + FLASH->OPTKEYR = FLASH_OPT_KEY2; + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Lock the FLASH Option Control Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void) +{ + /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */ + FLASH->OPTCR |= FLASH_OPTCR_OPTLOCK; + + return HAL_OK; +} + +/** + * @brief Launch the option byte loading. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Launch(void) +{ + /* Set the OPTSTRT bit in OPTCR register */ + *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= FLASH_OPTCR_OPTSTRT; + + /* Wait for last operation to be completed */ + return(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE)); +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral Errors functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time Errors of the FLASH peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Get the specific FLASH error flag. + * @retval FLASH_ErrorCode: The returned value can be a combination of: + * @arg HAL_FLASH_ERROR_RD: FLASH Read Protection error flag (PCROP) + * @arg HAL_FLASH_ERROR_PGS: FLASH Programming Sequence error flag + * @arg HAL_FLASH_ERROR_PGP: FLASH Programming Parallelism error flag + * @arg HAL_FLASH_ERROR_PGA: FLASH Programming Alignment error flag + * @arg HAL_FLASH_ERROR_WRP: FLASH Write protected error flag + * @arg HAL_FLASH_ERROR_OPERATION: FLASH operation Error flag + */ +uint32_t HAL_FLASH_GetError(void) +{ + return pFlash.ErrorCode; +} + +/** + * @} + */ + +/** + * @brief Wait for a FLASH operation to complete. + * @param Timeout maximum flash operationtimeout + * @retval HAL Status + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout) +{ + uint32_t tickstart = 0U; + + /* Clear Error Code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset. + Even if the FLASH operation fails, the BUSY flag will be reset and an error + flag will be set */ + /* Get tick */ + tickstart = HAL_GetTick(); + + while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) != RESET) + { + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout)) + { + return HAL_TIMEOUT; + } + } + } + + /* Check FLASH End of Operation flag */ + if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); + } +#if defined(FLASH_SR_RDERR) + if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \ + FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)) != RESET) +#else + if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \ + FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR)) != RESET) +#endif /* FLASH_SR_RDERR */ + { + /*Save the error code*/ + FLASH_SetErrorCode(); + return HAL_ERROR; + } + + /* If there is no error flag set */ + return HAL_OK; + +} + +/** + * @brief Program a double word (64-bit) at a specified address. + * @note This function must be used when the device voltage range is from + * 2.7V to 3.6V and Vpp in the range 7V to 9V. + * + * @note If an erase and a program operations are requested simultaneously, + * the erase operation is performed before the program one. + * + * @param Address specifies the address to be programmed. + * @param Data specifies the data to be programmed. + * @retval None + */ +static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data) +{ + /* Check the parameters */ + assert_param(IS_FLASH_ADDRESS(Address)); + + /* If the previous operation is completed, proceed to program the new data */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); + FLASH->CR |= FLASH_PSIZE_DOUBLE_WORD; + FLASH->CR |= FLASH_CR_PG; + + /* Program first word */ + *(__IO uint32_t*)Address = (uint32_t)Data; + + /* Barrier to ensure programming is performed in 2 steps, in right order + (independently of compiler optimization behavior) */ + __ISB(); + + /* Program second word */ + *(__IO uint32_t*)(Address+4) = (uint32_t)(Data >> 32); +} + + +/** + * @brief Program word (32-bit) at a specified address. + * @note This function must be used when the device voltage range is from + * 2.7V to 3.6V. + * + * @note If an erase and a program operations are requested simultaneously, + * the erase operation is performed before the program one. + * + * @param Address specifies the address to be programmed. + * @param Data specifies the data to be programmed. + * @retval None + */ +static void FLASH_Program_Word(uint32_t Address, uint32_t Data) +{ + /* Check the parameters */ + assert_param(IS_FLASH_ADDRESS(Address)); + + /* If the previous operation is completed, proceed to program the new data */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); + FLASH->CR |= FLASH_PSIZE_WORD; + FLASH->CR |= FLASH_CR_PG; + + *(__IO uint32_t*)Address = Data; +} + +/** + * @brief Program a half-word (16-bit) at a specified address. + * @note This function must be used when the device voltage range is from + * 2.1V to 3.6V. + * + * @note If an erase and a program operations are requested simultaneously, + * the erase operation is performed before the program one. + * + * @param Address specifies the address to be programmed. + * @param Data specifies the data to be programmed. + * @retval None + */ +static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data) +{ + /* Check the parameters */ + assert_param(IS_FLASH_ADDRESS(Address)); + + /* If the previous operation is completed, proceed to program the new data */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); + FLASH->CR |= FLASH_PSIZE_HALF_WORD; + FLASH->CR |= FLASH_CR_PG; + + *(__IO uint16_t*)Address = Data; +} + +/** + * @brief Program byte (8-bit) at a specified address. + * @note This function must be used when the device voltage range is from + * 1.8V to 3.6V. + * + * @note If an erase and a program operations are requested simultaneously, + * the erase operation is performed before the program one. + * + * @param Address specifies the address to be programmed. + * @param Data specifies the data to be programmed. + * @retval None + */ +static void FLASH_Program_Byte(uint32_t Address, uint8_t Data) +{ + /* Check the parameters */ + assert_param(IS_FLASH_ADDRESS(Address)); + + /* If the previous operation is completed, proceed to program the new data */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); + FLASH->CR |= FLASH_PSIZE_BYTE; + FLASH->CR |= FLASH_CR_PG; + + *(__IO uint8_t*)Address = Data; +} + +/** + * @brief Set the specific FLASH error flag. + * @retval None + */ +static void FLASH_SetErrorCode(void) +{ + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) != RESET) + { + pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP; + + /* Clear FLASH write protection error pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_WRPERR); + } + + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR) != RESET) + { + pFlash.ErrorCode |= HAL_FLASH_ERROR_PGA; + + /* Clear FLASH Programming alignment error pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGAERR); + } + + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGPERR) != RESET) + { + pFlash.ErrorCode |= HAL_FLASH_ERROR_PGP; + + /* Clear FLASH Programming parallelism error pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGPERR); + } + + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGSERR) != RESET) + { + pFlash.ErrorCode |= HAL_FLASH_ERROR_PGS; + + /* Clear FLASH Programming sequence error pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGSERR); + } +#if defined(FLASH_SR_RDERR) + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR) != RESET) + { + pFlash.ErrorCode |= HAL_FLASH_ERROR_RD; + + /* Clear FLASH Proprietary readout protection error pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_RDERR); + } +#endif /* FLASH_SR_RDERR */ + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPERR) != RESET) + { + pFlash.ErrorCode |= HAL_FLASH_ERROR_OPERATION; + + /* Clear FLASH Operation error pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_OPERR); + } +} + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/stm32f4xx_hal_flash.h b/libs/hal/stm32f4xx_hal_flash.h similarity index 97% rename from Drivers/stm32f4xx_hal_flash.h rename to libs/hal/stm32f4xx_hal_flash.h index a047e82..26d789e 100644 --- a/Drivers/stm32f4xx_hal_flash.h +++ b/libs/hal/stm32f4xx_hal_flash.h @@ -1,425 +1,425 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_flash.h - * @author MCD Application Team - * @brief Header file of FLASH HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_FLASH_H -#define __STM32F4xx_HAL_FLASH_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup FLASH - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup FLASH_Exported_Types FLASH Exported Types - * @{ - */ - -/** - * @brief FLASH Procedure structure definition - */ -typedef enum -{ - FLASH_PROC_NONE = 0U, - FLASH_PROC_SECTERASE, - FLASH_PROC_MASSERASE, - FLASH_PROC_PROGRAM -} FLASH_ProcedureTypeDef; - -/** - * @brief FLASH handle Structure definition - */ -typedef struct -{ - __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*Internal variable to indicate which procedure is ongoing or not in IT context*/ - - __IO uint32_t NbSectorsToErase; /*Internal variable to save the remaining sectors to erase in IT context*/ - - __IO uint8_t VoltageForErase; /*Internal variable to provide voltage range selected by user in IT context*/ - - __IO uint32_t Sector; /*Internal variable to define the current sector which is erasing*/ - - __IO uint32_t Bank; /*Internal variable to save current bank selected during mass erase*/ - - __IO uint32_t Address; /*Internal variable to save address selected for program*/ - - HAL_LockTypeDef Lock; /* FLASH locking object */ - - __IO uint32_t ErrorCode; /* FLASH error code */ - -}FLASH_ProcessTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup FLASH_Exported_Constants FLASH Exported Constants - * @{ - */ -/** @defgroup FLASH_Error_Code FLASH Error Code - * @brief FLASH Error Code - * @{ - */ -#define HAL_FLASH_ERROR_NONE 0x00000000U /*!< No error */ -#define HAL_FLASH_ERROR_RD 0x00000001U /*!< Read Protection error */ -#define HAL_FLASH_ERROR_PGS 0x00000002U /*!< Programming Sequence error */ -#define HAL_FLASH_ERROR_PGP 0x00000004U /*!< Programming Parallelism error */ -#define HAL_FLASH_ERROR_PGA 0x00000008U /*!< Programming Alignment error */ -#define HAL_FLASH_ERROR_WRP 0x00000010U /*!< Write protection error */ -#define HAL_FLASH_ERROR_OPERATION 0x00000020U /*!< Operation Error */ -/** - * @} - */ - -/** @defgroup FLASH_Type_Program FLASH Type Program - * @{ - */ -#define FLASH_TYPEPROGRAM_BYTE 0x00000000U /*!< Program byte (8-bit) at a specified address */ -#define FLASH_TYPEPROGRAM_HALFWORD 0x00000001U /*!< Program a half-word (16-bit) at a specified address */ -#define FLASH_TYPEPROGRAM_WORD 0x00000002U /*!< Program a word (32-bit) at a specified address */ -#define FLASH_TYPEPROGRAM_DOUBLEWORD 0x00000003U /*!< Program a double word (64-bit) at a specified address */ -/** - * @} - */ - -/** @defgroup FLASH_Flag_definition FLASH Flag definition - * @brief Flag definition - * @{ - */ -#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */ -#define FLASH_FLAG_OPERR FLASH_SR_SOP /*!< FLASH operation Error flag */ -#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */ -#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */ -#define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */ -#define FLASH_FLAG_PGSERR FLASH_SR_PGSERR /*!< FLASH Programming Sequence error flag */ -#if defined(FLASH_SR_RDERR) -#define FLASH_FLAG_RDERR FLASH_SR_RDERR /*!< Read Protection error flag (PCROP) */ -#endif /* FLASH_SR_RDERR */ -#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */ -/** - * @} - */ - -/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition - * @brief FLASH Interrupt definition - * @{ - */ -#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */ -#define FLASH_IT_ERR 0x02000000U /*!< Error Interrupt source */ -/** - * @} - */ - -/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism - * @{ - */ -#define FLASH_PSIZE_BYTE 0x00000000U -#define FLASH_PSIZE_HALF_WORD 0x00000100U -#define FLASH_PSIZE_WORD 0x00000200U -#define FLASH_PSIZE_DOUBLE_WORD 0x00000300U -#define CR_PSIZE_MASK 0xFFFFFCFFU -/** - * @} - */ - -/** @defgroup FLASH_Keys FLASH Keys - * @{ - */ -#define RDP_KEY ((uint16_t)0x00A5) -#define FLASH_KEY1 0x45670123U -#define FLASH_KEY2 0xCDEF89ABU -#define FLASH_OPT_KEY1 0x08192A3BU -#define FLASH_OPT_KEY2 0x4C5D6E7FU -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup FLASH_Exported_Macros FLASH Exported Macros - * @{ - */ -/** - * @brief Set the FLASH Latency. - * @param __LATENCY__ FLASH Latency - * The value of this parameter depend on device used within the same series - * @retval none - */ -#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (*(__IO uint8_t *)ACR_BYTE0_ADDRESS = (uint8_t)(__LATENCY__)) - -/** - * @brief Get the FLASH Latency. - * @retval FLASH Latency - * The value of this parameter depend on device used within the same series - */ -#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY)) - -/** - * @brief Enable the FLASH prefetch buffer. - * @retval none - */ -#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN) - -/** - * @brief Disable the FLASH prefetch buffer. - * @retval none - */ -#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN)) - -/** - * @brief Enable the FLASH instruction cache. - * @retval none - */ -#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_ICEN) - -/** - * @brief Disable the FLASH instruction cache. - * @retval none - */ -#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_ICEN)) - -/** - * @brief Enable the FLASH data cache. - * @retval none - */ -#define __HAL_FLASH_DATA_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_DCEN) - -/** - * @brief Disable the FLASH data cache. - * @retval none - */ -#define __HAL_FLASH_DATA_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_DCEN)) - -/** - * @brief Resets the FLASH instruction Cache. - * @note This function must be used only when the Instruction Cache is disabled. - * @retval None - */ -#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_ICRST; \ - FLASH->ACR &= ~FLASH_ACR_ICRST; \ - }while(0U) - -/** - * @brief Resets the FLASH data Cache. - * @note This function must be used only when the data Cache is disabled. - * @retval None - */ -#define __HAL_FLASH_DATA_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_DCRST; \ - FLASH->ACR &= ~FLASH_ACR_DCRST; \ - }while(0U) -/** - * @brief Enable the specified FLASH interrupt. - * @param __INTERRUPT__ FLASH interrupt - * This parameter can be any combination of the following values: - * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt - * @arg FLASH_IT_ERR: Error Interrupt - * @retval none - */ -#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__)) - -/** - * @brief Disable the specified FLASH interrupt. - * @param __INTERRUPT__ FLASH interrupt - * This parameter can be any combination of the following values: - * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt - * @arg FLASH_IT_ERR: Error Interrupt - * @retval none - */ -#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__)) - -/** - * @brief Get the specified FLASH flag status. - * @param __FLAG__ specifies the FLASH flags to check. - * This parameter can be any combination of the following values: - * @arg FLASH_FLAG_EOP : FLASH End of Operation flag - * @arg FLASH_FLAG_OPERR : FLASH operation Error flag - * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag - * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag - * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag - * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag - * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) (*) - * @arg FLASH_FLAG_BSY : FLASH Busy flag - * (*) FLASH_FLAG_RDERR is not available for STM32F405xx/407xx/415xx/417xx devices - * @retval The new state of __FLAG__ (SET or RESET). - */ -#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__))) - -/** - * @brief Clear the specified FLASH flags. - * @param __FLAG__ specifies the FLASH flags to clear. - * This parameter can be any combination of the following values: - * @arg FLASH_FLAG_EOP : FLASH End of Operation flag - * @arg FLASH_FLAG_OPERR : FLASH operation Error flag - * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag - * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag - * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag - * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag - * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) (*) - * (*) FLASH_FLAG_RDERR is not available for STM32F405xx/407xx/415xx/417xx devices - * @retval none - */ -#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__)) -/** - * @} - */ - -/* Include FLASH HAL Extension module */ -#include "stm32f4xx_hal_flash_ex.h" -#include "stm32f4xx_hal_flash_ramfunc.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup FLASH_Exported_Functions - * @{ - */ -/** @addtogroup FLASH_Exported_Functions_Group1 - * @{ - */ -/* Program operation functions ***********************************************/ -HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data); -HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data); -/* FLASH IRQ handler method */ -void HAL_FLASH_IRQHandler(void); -/* Callbacks in non blocking modes */ -void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); -void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); -/** - * @} - */ - -/** @addtogroup FLASH_Exported_Functions_Group2 - * @{ - */ -/* Peripheral Control functions **********************************************/ -HAL_StatusTypeDef HAL_FLASH_Unlock(void); -HAL_StatusTypeDef HAL_FLASH_Lock(void); -HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); -HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); -/* Option bytes control */ -HAL_StatusTypeDef HAL_FLASH_OB_Launch(void); -/** - * @} - */ - -/** @addtogroup FLASH_Exported_Functions_Group3 - * @{ - */ -/* Peripheral State functions ************************************************/ -uint32_t HAL_FLASH_GetError(void); -HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @defgroup FLASH_Private_Variables FLASH Private Variables - * @{ - */ - -/** - * @} - */ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup FLASH_Private_Constants FLASH Private Constants - * @{ - */ - -/** - * @brief ACR register byte 0 (Bits[7:0]) base address - */ -#define ACR_BYTE0_ADDRESS 0x40023C00U -/** - * @brief OPTCR register byte 0 (Bits[7:0]) base address - */ -#define OPTCR_BYTE0_ADDRESS 0x40023C14U -/** - * @brief OPTCR register byte 1 (Bits[15:8]) base address - */ -#define OPTCR_BYTE1_ADDRESS 0x40023C15U -/** - * @brief OPTCR register byte 2 (Bits[23:16]) base address - */ -#define OPTCR_BYTE2_ADDRESS 0x40023C16U -/** - * @brief OPTCR register byte 3 (Bits[31:24]) base address - */ -#define OPTCR_BYTE3_ADDRESS 0x40023C17U - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup FLASH_Private_Macros FLASH Private Macros - * @{ - */ - -/** @defgroup FLASH_IS_FLASH_Definitions FLASH Private macros to check input parameters - * @{ - */ -#define IS_FLASH_TYPEPROGRAM(VALUE)(((VALUE) == FLASH_TYPEPROGRAM_BYTE) || \ - ((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \ - ((VALUE) == FLASH_TYPEPROGRAM_WORD) || \ - ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD)) -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup FLASH_Private_Functions FLASH Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_FLASH_H */ - +/** + ****************************************************************************** + * @file stm32f4xx_hal_flash.h + * @author MCD Application Team + * @brief Header file of FLASH HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_FLASH_H +#define __STM32F4xx_HAL_FLASH_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASH + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Types FLASH Exported Types + * @{ + */ + +/** + * @brief FLASH Procedure structure definition + */ +typedef enum +{ + FLASH_PROC_NONE = 0U, + FLASH_PROC_SECTERASE, + FLASH_PROC_MASSERASE, + FLASH_PROC_PROGRAM +} FLASH_ProcedureTypeDef; + +/** + * @brief FLASH handle Structure definition + */ +typedef struct +{ + __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*Internal variable to indicate which procedure is ongoing or not in IT context*/ + + __IO uint32_t NbSectorsToErase; /*Internal variable to save the remaining sectors to erase in IT context*/ + + __IO uint8_t VoltageForErase; /*Internal variable to provide voltage range selected by user in IT context*/ + + __IO uint32_t Sector; /*Internal variable to define the current sector which is erasing*/ + + __IO uint32_t Bank; /*Internal variable to save current bank selected during mass erase*/ + + __IO uint32_t Address; /*Internal variable to save address selected for program*/ + + HAL_LockTypeDef Lock; /* FLASH locking object */ + + __IO uint32_t ErrorCode; /* FLASH error code */ + +}FLASH_ProcessTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Constants FLASH Exported Constants + * @{ + */ +/** @defgroup FLASH_Error_Code FLASH Error Code + * @brief FLASH Error Code + * @{ + */ +#define HAL_FLASH_ERROR_NONE 0x00000000U /*!< No error */ +#define HAL_FLASH_ERROR_RD 0x00000001U /*!< Read Protection error */ +#define HAL_FLASH_ERROR_PGS 0x00000002U /*!< Programming Sequence error */ +#define HAL_FLASH_ERROR_PGP 0x00000004U /*!< Programming Parallelism error */ +#define HAL_FLASH_ERROR_PGA 0x00000008U /*!< Programming Alignment error */ +#define HAL_FLASH_ERROR_WRP 0x00000010U /*!< Write protection error */ +#define HAL_FLASH_ERROR_OPERATION 0x00000020U /*!< Operation Error */ +/** + * @} + */ + +/** @defgroup FLASH_Type_Program FLASH Type Program + * @{ + */ +#define FLASH_TYPEPROGRAM_BYTE 0x00000000U /*!< Program byte (8-bit) at a specified address */ +#define FLASH_TYPEPROGRAM_HALFWORD 0x00000001U /*!< Program a half-word (16-bit) at a specified address */ +#define FLASH_TYPEPROGRAM_WORD 0x00000002U /*!< Program a word (32-bit) at a specified address */ +#define FLASH_TYPEPROGRAM_DOUBLEWORD 0x00000003U /*!< Program a double word (64-bit) at a specified address */ +/** + * @} + */ + +/** @defgroup FLASH_Flag_definition FLASH Flag definition + * @brief Flag definition + * @{ + */ +#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */ +#define FLASH_FLAG_OPERR FLASH_SR_SOP /*!< FLASH operation Error flag */ +#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */ +#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */ +#define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */ +#define FLASH_FLAG_PGSERR FLASH_SR_PGSERR /*!< FLASH Programming Sequence error flag */ +#if defined(FLASH_SR_RDERR) +#define FLASH_FLAG_RDERR FLASH_SR_RDERR /*!< Read Protection error flag (PCROP) */ +#endif /* FLASH_SR_RDERR */ +#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */ +/** + * @} + */ + +/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition + * @brief FLASH Interrupt definition + * @{ + */ +#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */ +#define FLASH_IT_ERR 0x02000000U /*!< Error Interrupt source */ +/** + * @} + */ + +/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism + * @{ + */ +#define FLASH_PSIZE_BYTE 0x00000000U +#define FLASH_PSIZE_HALF_WORD 0x00000100U +#define FLASH_PSIZE_WORD 0x00000200U +#define FLASH_PSIZE_DOUBLE_WORD 0x00000300U +#define CR_PSIZE_MASK 0xFFFFFCFFU +/** + * @} + */ + +/** @defgroup FLASH_Keys FLASH Keys + * @{ + */ +#define RDP_KEY ((uint16_t)0x00A5) +#define FLASH_KEY1 0x45670123U +#define FLASH_KEY2 0xCDEF89ABU +#define FLASH_OPT_KEY1 0x08192A3BU +#define FLASH_OPT_KEY2 0x4C5D6E7FU +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Macros FLASH Exported Macros + * @{ + */ +/** + * @brief Set the FLASH Latency. + * @param __LATENCY__ FLASH Latency + * The value of this parameter depend on device used within the same series + * @retval none + */ +#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (*(__IO uint8_t *)ACR_BYTE0_ADDRESS = (uint8_t)(__LATENCY__)) + +/** + * @brief Get the FLASH Latency. + * @retval FLASH Latency + * The value of this parameter depend on device used within the same series + */ +#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY)) + +/** + * @brief Enable the FLASH prefetch buffer. + * @retval none + */ +#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN) + +/** + * @brief Disable the FLASH prefetch buffer. + * @retval none + */ +#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN)) + +/** + * @brief Enable the FLASH instruction cache. + * @retval none + */ +#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_ICEN) + +/** + * @brief Disable the FLASH instruction cache. + * @retval none + */ +#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_ICEN)) + +/** + * @brief Enable the FLASH data cache. + * @retval none + */ +#define __HAL_FLASH_DATA_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_DCEN) + +/** + * @brief Disable the FLASH data cache. + * @retval none + */ +#define __HAL_FLASH_DATA_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_DCEN)) + +/** + * @brief Resets the FLASH instruction Cache. + * @note This function must be used only when the Instruction Cache is disabled. + * @retval None + */ +#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_ICRST; \ + FLASH->ACR &= ~FLASH_ACR_ICRST; \ + }while(0U) + +/** + * @brief Resets the FLASH data Cache. + * @note This function must be used only when the data Cache is disabled. + * @retval None + */ +#define __HAL_FLASH_DATA_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_DCRST; \ + FLASH->ACR &= ~FLASH_ACR_DCRST; \ + }while(0U) +/** + * @brief Enable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be any combination of the following values: + * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt + * @arg FLASH_IT_ERR: Error Interrupt + * @retval none + */ +#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__)) + +/** + * @brief Disable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be any combination of the following values: + * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt + * @arg FLASH_IT_ERR: Error Interrupt + * @retval none + */ +#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__)) + +/** + * @brief Get the specified FLASH flag status. + * @param __FLAG__ specifies the FLASH flags to check. + * This parameter can be any combination of the following values: + * @arg FLASH_FLAG_EOP : FLASH End of Operation flag + * @arg FLASH_FLAG_OPERR : FLASH operation Error flag + * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag + * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag + * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag + * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag + * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) (*) + * @arg FLASH_FLAG_BSY : FLASH Busy flag + * (*) FLASH_FLAG_RDERR is not available for STM32F405xx/407xx/415xx/417xx devices + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__))) + +/** + * @brief Clear the specified FLASH flags. + * @param __FLAG__ specifies the FLASH flags to clear. + * This parameter can be any combination of the following values: + * @arg FLASH_FLAG_EOP : FLASH End of Operation flag + * @arg FLASH_FLAG_OPERR : FLASH operation Error flag + * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag + * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag + * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag + * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag + * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) (*) + * (*) FLASH_FLAG_RDERR is not available for STM32F405xx/407xx/415xx/417xx devices + * @retval none + */ +#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__)) +/** + * @} + */ + +/* Include FLASH HAL Extension module */ +#include "stm32f4xx_hal_flash_ex.h" +#include "stm32f4xx_hal_flash_ramfunc.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASH_Exported_Functions + * @{ + */ +/** @addtogroup FLASH_Exported_Functions_Group1 + * @{ + */ +/* Program operation functions ***********************************************/ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data); +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data); +/* FLASH IRQ handler method */ +void HAL_FLASH_IRQHandler(void); +/* Callbacks in non blocking modes */ +void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); +void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); +/** + * @} + */ + +/** @addtogroup FLASH_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions **********************************************/ +HAL_StatusTypeDef HAL_FLASH_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_Lock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); +/* Option bytes control */ +HAL_StatusTypeDef HAL_FLASH_OB_Launch(void); +/** + * @} + */ + +/** @addtogroup FLASH_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State functions ************************************************/ +uint32_t HAL_FLASH_GetError(void); +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); +/** + * @} + */ + +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup FLASH_Private_Variables FLASH Private Variables + * @{ + */ + +/** + * @} + */ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup FLASH_Private_Constants FLASH Private Constants + * @{ + */ + +/** + * @brief ACR register byte 0 (Bits[7:0]) base address + */ +#define ACR_BYTE0_ADDRESS 0x40023C00U +/** + * @brief OPTCR register byte 0 (Bits[7:0]) base address + */ +#define OPTCR_BYTE0_ADDRESS 0x40023C14U +/** + * @brief OPTCR register byte 1 (Bits[15:8]) base address + */ +#define OPTCR_BYTE1_ADDRESS 0x40023C15U +/** + * @brief OPTCR register byte 2 (Bits[23:16]) base address + */ +#define OPTCR_BYTE2_ADDRESS 0x40023C16U +/** + * @brief OPTCR register byte 3 (Bits[31:24]) base address + */ +#define OPTCR_BYTE3_ADDRESS 0x40023C17U + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup FLASH_Private_Macros FLASH Private Macros + * @{ + */ + +/** @defgroup FLASH_IS_FLASH_Definitions FLASH Private macros to check input parameters + * @{ + */ +#define IS_FLASH_TYPEPROGRAM(VALUE)(((VALUE) == FLASH_TYPEPROGRAM_BYTE) || \ + ((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \ + ((VALUE) == FLASH_TYPEPROGRAM_WORD) || \ + ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD)) +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup FLASH_Private_Functions FLASH Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_FLASH_H */ + diff --git a/Drivers/stm32f4xx_hal_flash_ex.c b/libs/hal/stm32f4xx_hal_flash_ex.c similarity index 97% rename from Drivers/stm32f4xx_hal_flash_ex.c rename to libs/hal/stm32f4xx_hal_flash_ex.c index abff6d7..d99eace 100644 --- a/Drivers/stm32f4xx_hal_flash_ex.c +++ b/libs/hal/stm32f4xx_hal_flash_ex.c @@ -1,1347 +1,1347 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_flash_ex.c - * @author MCD Application Team - * @brief Extended FLASH HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the FLASH extension peripheral: - * + Extended programming operations functions - * - @verbatim - ============================================================================== - ##### Flash Extension features ##### - ============================================================================== - - [..] Comparing to other previous devices, the FLASH interface for STM32F427xx/437xx and - STM32F429xx/439xx devices contains the following additional features - - (+) Capacity up to 2 Mbyte with dual bank architecture supporting read-while-write - capability (RWW) - (+) Dual bank memory organization - (+) PCROP protection for all banks - - ##### How to use this driver ##### - ============================================================================== - [..] This driver provides functions to configure and program the FLASH memory - of all STM32F427xx/437xx, STM32F429xx/439xx, STM32F469xx/479xx and STM32F446xx - devices. It includes - (#) FLASH Memory Erase functions: - (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and - HAL_FLASH_Lock() functions - (++) Erase function: Erase sector, erase all sectors - (++) There are two modes of erase : - (+++) Polling Mode using HAL_FLASHEx_Erase() - (+++) Interrupt Mode using HAL_FLASHEx_Erase_IT() - - (#) Option Bytes Programming functions: Use HAL_FLASHEx_OBProgram() to : - (++) Set/Reset the write protection - (++) Set the Read protection Level - (++) Set the BOR level - (++) Program the user Option Bytes - (#) Advanced Option Bytes Programming functions: Use HAL_FLASHEx_AdvOBProgram() to : - (++) Extended space (bank 2) erase function - (++) Full FLASH space (2 Mo) erase (bank 1 and bank 2) - (++) Dual Boot activation - (++) Write protection configuration for bank 2 - (++) PCROP protection configuration and control for both banks - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup FLASHEx FLASHEx - * @brief FLASH HAL Extension module driver - * @{ - */ - -#ifdef HAL_FLASH_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup FLASHEx_Private_Constants - * @{ - */ -#define FLASH_TIMEOUT_VALUE 50000U /* 50 s */ -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @addtogroup FLASHEx_Private_Variables - * @{ - */ -extern FLASH_ProcessTypeDef pFlash; -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ -/** @addtogroup FLASHEx_Private_Functions - * @{ - */ -/* Option bytes control */ -static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks); -static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks); -static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks); -static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t Level); -static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t Iwdg, uint8_t Stop, uint8_t Stdby); -static HAL_StatusTypeDef FLASH_OB_BOR_LevelConfig(uint8_t Level); -static uint8_t FLASH_OB_GetUser(void); -static uint16_t FLASH_OB_GetWRP(void); -static uint8_t FLASH_OB_GetRDP(void); -static uint8_t FLASH_OB_GetBOR(void); - -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) ||\ - defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\ - defined(STM32F423xx) -static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t Sector); -static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t Sector); -#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx - STM32F413xx || STM32F423xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks); -static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks); -static HAL_StatusTypeDef FLASH_OB_BootConfig(uint8_t BootConfig); -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -extern HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions - * @{ - */ - -/** @defgroup FLASHEx_Exported_Functions_Group1 Extended IO operation functions - * @brief Extended IO operation functions - * -@verbatim - =============================================================================== - ##### Extended programming operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the Extension FLASH - programming operations. - -@endverbatim - * @{ - */ -/** - * @brief Perform a mass erase or erase the specified FLASH memory sectors - * @param[in] pEraseInit pointer to an FLASH_EraseInitTypeDef structure that - * contains the configuration information for the erasing. - * - * @param[out] SectorError pointer to variable that - * contains the configuration information on faulty sector in case of error - * (0xFFFFFFFFU means that all the sectors have been correctly erased) - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError) -{ - HAL_StatusTypeDef status = HAL_ERROR; - uint32_t index = 0U; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - /*Initialization of SectorError variable*/ - *SectorError = 0xFFFFFFFFU; - - if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) - { - /*Mass erase to be done*/ - FLASH_MassErase((uint8_t) pEraseInit->VoltageRange, pEraseInit->Banks); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - /* if the erase operation is completed, disable the MER Bit */ - FLASH->CR &= (~FLASH_MER_BIT); - } - else - { - /* Check the parameters */ - assert_param(IS_FLASH_NBSECTORS(pEraseInit->NbSectors + pEraseInit->Sector)); - - /* Erase by sector by sector to be done*/ - for (index = pEraseInit->Sector; index < (pEraseInit->NbSectors + pEraseInit->Sector); index++) - { - FLASH_Erase_Sector(index, (uint8_t) pEraseInit->VoltageRange); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - /* If the erase operation is completed, disable the SER and SNB Bits */ - CLEAR_BIT(FLASH->CR, (FLASH_CR_SER | FLASH_CR_SNB)); - - if (status != HAL_OK) - { - /* In case of error, stop erase procedure and return the faulty sector*/ - *SectorError = index; - break; - } - } - } - /* Flush the caches to be sure of the data consistency */ - FLASH_FlushCaches(); - } - - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - - return status; -} - -/** - * @brief Perform a mass erase or erase the specified FLASH memory sectors with interrupt enabled - * @param pEraseInit pointer to an FLASH_EraseInitTypeDef structure that - * contains the configuration information for the erasing. - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); - - /* Enable End of FLASH Operation interrupt */ - __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP); - - /* Enable Error source interrupt */ - __HAL_FLASH_ENABLE_IT(FLASH_IT_ERR); - - /* Clear pending flags (if any) */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | \ - FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR); - - if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) - { - /*Mass erase to be done*/ - pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE; - pFlash.Bank = pEraseInit->Banks; - FLASH_MassErase((uint8_t) pEraseInit->VoltageRange, pEraseInit->Banks); - } - else - { - /* Erase by sector to be done*/ - - /* Check the parameters */ - assert_param(IS_FLASH_NBSECTORS(pEraseInit->NbSectors + pEraseInit->Sector)); - - pFlash.ProcedureOnGoing = FLASH_PROC_SECTERASE; - pFlash.NbSectorsToErase = pEraseInit->NbSectors; - pFlash.Sector = pEraseInit->Sector; - pFlash.VoltageForErase = (uint8_t)pEraseInit->VoltageRange; - - /*Erase 1st sector and wait for IT*/ - FLASH_Erase_Sector(pEraseInit->Sector, pEraseInit->VoltageRange); - } - - return status; -} - -/** - * @brief Program option bytes - * @param pOBInit pointer to an FLASH_OBInitStruct structure that - * contains the configuration information for the programming. - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit) -{ - HAL_StatusTypeDef status = HAL_ERROR; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_OPTIONBYTE(pOBInit->OptionType)); - - /*Write protection configuration*/ - if ((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP) - { - assert_param(IS_WRPSTATE(pOBInit->WRPState)); - if (pOBInit->WRPState == OB_WRPSTATE_ENABLE) - { - /*Enable of Write protection on the selected Sector*/ - status = FLASH_OB_EnableWRP(pOBInit->WRPSector, pOBInit->Banks); - } - else - { - /*Disable of Write protection on the selected Sector*/ - status = FLASH_OB_DisableWRP(pOBInit->WRPSector, pOBInit->Banks); - } - } - - /*Read protection configuration*/ - if ((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP) - { - status = FLASH_OB_RDP_LevelConfig(pOBInit->RDPLevel); - } - - /*USER configuration*/ - if ((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER) - { - status = FLASH_OB_UserConfig(pOBInit->USERConfig & OB_IWDG_SW, - pOBInit->USERConfig & OB_STOP_NO_RST, - pOBInit->USERConfig & OB_STDBY_NO_RST); - } - - /*BOR Level configuration*/ - if ((pOBInit->OptionType & OPTIONBYTE_BOR) == OPTIONBYTE_BOR) - { - status = FLASH_OB_BOR_LevelConfig(pOBInit->BORLevel); - } - - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - - return status; -} - -/** - * @brief Get the Option byte configuration - * @param pOBInit pointer to an FLASH_OBInitStruct structure that - * contains the configuration information for the programming. - * - * @retval None - */ -void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit) -{ - pOBInit->OptionType = OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_BOR; - - /*Get WRP*/ - pOBInit->WRPSector = (uint32_t)FLASH_OB_GetWRP(); - - /*Get RDP Level*/ - pOBInit->RDPLevel = (uint32_t)FLASH_OB_GetRDP(); - - /*Get USER*/ - pOBInit->USERConfig = (uint8_t)FLASH_OB_GetUser(); - - /*Get BOR Level*/ - pOBInit->BORLevel = (uint32_t)FLASH_OB_GetBOR(); -} - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ - defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ - defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief Program option bytes - * @param pAdvOBInit pointer to an FLASH_AdvOBProgramInitTypeDef structure that - * contains the configuration information for the programming. - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_AdvOBProgram(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit) -{ - HAL_StatusTypeDef status = HAL_ERROR; - - /* Check the parameters */ - assert_param(IS_OBEX(pAdvOBInit->OptionType)); - - /*Program PCROP option byte*/ - if (((pAdvOBInit->OptionType) & OPTIONBYTE_PCROP) == OPTIONBYTE_PCROP) - { - /* Check the parameters */ - assert_param(IS_PCROPSTATE(pAdvOBInit->PCROPState)); - if ((pAdvOBInit->PCROPState) == OB_PCROP_STATE_ENABLE) - { - /*Enable of Write protection on the selected Sector*/ -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\ - defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - status = FLASH_OB_EnablePCROP(pAdvOBInit->Sectors); -#else /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */ - status = FLASH_OB_EnablePCROP(pAdvOBInit->SectorsBank1, pAdvOBInit->SectorsBank2, pAdvOBInit->Banks); -#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || - STM32F413xx || STM32F423xx */ - } - else - { - /*Disable of Write protection on the selected Sector*/ -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\ - defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - status = FLASH_OB_DisablePCROP(pAdvOBInit->Sectors); -#else /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */ - status = FLASH_OB_DisablePCROP(pAdvOBInit->SectorsBank1, pAdvOBInit->SectorsBank2, pAdvOBInit->Banks); -#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || - STM32F413xx || STM32F423xx */ - } - } - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) - /*Program BOOT config option byte*/ - if (((pAdvOBInit->OptionType) & OPTIONBYTE_BOOTCONFIG) == OPTIONBYTE_BOOTCONFIG) - { - status = FLASH_OB_BootConfig(pAdvOBInit->BootConfig); - } -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - - return status; -} - -/** - * @brief Get the OBEX byte configuration - * @param pAdvOBInit pointer to an FLASH_AdvOBProgramInitTypeDef structure that - * contains the configuration information for the programming. - * - * @retval None - */ -void HAL_FLASHEx_AdvOBGetConfig(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit) -{ -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\ - defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - /*Get Sector*/ - pAdvOBInit->Sectors = (*(__IO uint16_t *)(OPTCR_BYTE2_ADDRESS)); -#else /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */ - /*Get Sector for Bank1*/ - pAdvOBInit->SectorsBank1 = (*(__IO uint16_t *)(OPTCR_BYTE2_ADDRESS)); - - /*Get Sector for Bank2*/ - pAdvOBInit->SectorsBank2 = (*(__IO uint16_t *)(OPTCR1_BYTE2_ADDRESS)); - - /*Get Boot config OB*/ - pAdvOBInit->BootConfig = *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS; -#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || - STM32F413xx || STM32F423xx */ -} - -/** - * @brief Select the Protection Mode - * - * @note After PCROP activated Option Byte modification NOT POSSIBLE! excepted - * Global Read Out Protection modification (from level1 to level0) - * @note Once SPRMOD bit is active unprotection of a protected sector is not possible - * @note Read a protected sector will set RDERR Flag and write a protected sector will set WRPERR Flag - * @note This function can be used only for STM32F42xxx/STM32F43xxx/STM32F401xx/STM32F411xx/STM32F446xx/ - * STM32F469xx/STM32F479xx/STM32F412xx/STM32F413xx devices. - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_OB_SelectPCROP(void) -{ - uint8_t optiontmp = 0xFF; - - /* Mask SPRMOD bit */ - optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE3_ADDRESS) & (uint8_t)0x7F); - - /* Update Option Byte */ - *(__IO uint8_t *)OPTCR_BYTE3_ADDRESS = (uint8_t)(OB_PCROP_SELECTED | optiontmp); - - return HAL_OK; -} - -/** - * @brief Deselect the Protection Mode - * - * @note After PCROP activated Option Byte modification NOT POSSIBLE! excepted - * Global Read Out Protection modification (from level1 to level0) - * @note Once SPRMOD bit is active unprotection of a protected sector is not possible - * @note Read a protected sector will set RDERR Flag and write a protected sector will set WRPERR Flag - * @note This function can be used only for STM32F42xxx/STM32F43xxx/STM32F401xx/STM32F411xx/STM32F446xx/ - * STM32F469xx/STM32F479xx/STM32F412xx/STM32F413xx devices. - * - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_OB_DeSelectPCROP(void) -{ - uint8_t optiontmp = 0xFF; - - /* Mask SPRMOD bit */ - optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE3_ADDRESS) & (uint8_t)0x7F); - - /* Update Option Byte */ - *(__IO uint8_t *)OPTCR_BYTE3_ADDRESS = (uint8_t)(OB_PCROP_DESELECTED | optiontmp); - - return HAL_OK; -} -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F410xx ||\ - STM32F411xE || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || - STM32F413xx || STM32F423xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** - * @brief Returns the FLASH Write Protection Option Bytes value for Bank 2 - * @note This function can be used only for STM32F42xxx/STM32F43xxx/STM32F469xx/STM32F479xx devices. - * @retval The FLASH Write Protection Option Bytes value - */ -uint16_t HAL_FLASHEx_OB_GetBank2WRP(void) -{ - /* Return the FLASH write protection Register value */ - return (*(__IO uint16_t *)(OPTCR1_BYTE2_ADDRESS)); -} -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -/** - * @} - */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** - * @brief Full erase of FLASH memory sectors - * @param VoltageRange The device voltage range which defines the erase parallelism. - * This parameter can be one of the following values: - * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, - * the operation will be done by byte (8-bit) - * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V, - * the operation will be done by half word (16-bit) - * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V, - * the operation will be done by word (32-bit) - * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, - * the operation will be done by double word (64-bit) - * - * @param Banks Banks to be erased - * This parameter can be one of the following values: - * @arg FLASH_BANK_1: Bank1 to be erased - * @arg FLASH_BANK_2: Bank2 to be erased - * @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased - * - * @retval HAL Status - */ -static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks) -{ - /* Check the parameters */ - assert_param(IS_VOLTAGERANGE(VoltageRange)); - assert_param(IS_FLASH_BANK(Banks)); - - /* if the previous operation is completed, proceed to erase all sectors */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); - - if (Banks == FLASH_BANK_BOTH) - { - /* bank1 & bank2 will be erased*/ - FLASH->CR |= FLASH_MER_BIT; - } - else if (Banks == FLASH_BANK_1) - { - /*Only bank1 will be erased*/ - FLASH->CR |= FLASH_CR_MER1; - } - else - { - /*Only bank2 will be erased*/ - FLASH->CR |= FLASH_CR_MER2; - } - FLASH->CR |= FLASH_CR_STRT | ((uint32_t)VoltageRange << 8U); -} - -/** - * @brief Erase the specified FLASH memory sector - * @param Sector FLASH sector to erase - * The value of this parameter depend on device used within the same series - * @param VoltageRange The device voltage range which defines the erase parallelism. - * This parameter can be one of the following values: - * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, - * the operation will be done by byte (8-bit) - * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V, - * the operation will be done by half word (16-bit) - * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V, - * the operation will be done by word (32-bit) - * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, - * the operation will be done by double word (64-bit) - * - * @retval None - */ -void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange) -{ - uint32_t tmp_psize = 0U; - - /* Check the parameters */ - assert_param(IS_FLASH_SECTOR(Sector)); - assert_param(IS_VOLTAGERANGE(VoltageRange)); - - if (VoltageRange == FLASH_VOLTAGE_RANGE_1) - { - tmp_psize = FLASH_PSIZE_BYTE; - } - else if (VoltageRange == FLASH_VOLTAGE_RANGE_2) - { - tmp_psize = FLASH_PSIZE_HALF_WORD; - } - else if (VoltageRange == FLASH_VOLTAGE_RANGE_3) - { - tmp_psize = FLASH_PSIZE_WORD; - } - else - { - tmp_psize = FLASH_PSIZE_DOUBLE_WORD; - } - - /* Need to add offset of 4 when sector higher than FLASH_SECTOR_11 */ - if (Sector > FLASH_SECTOR_11) - { - Sector += 4U; - } - /* If the previous operation is completed, proceed to erase the sector */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); - FLASH->CR |= tmp_psize; - CLEAR_BIT(FLASH->CR, FLASH_CR_SNB); - FLASH->CR |= FLASH_CR_SER | (Sector << FLASH_CR_SNB_Pos); - FLASH->CR |= FLASH_CR_STRT; -} - -/** - * @brief Enable the write protection of the desired bank1 or bank 2 sectors - * - * @note When the memory read protection level is selected (RDP level = 1), - * it is not possible to program or erase the flash sector i if CortexM4 - * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 - * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1). - * - * @param WRPSector specifies the sector(s) to be write protected. - * This parameter can be one of the following values: - * @arg WRPSector: A value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_23 - * @arg OB_WRP_SECTOR_All - * @note BANK2 starts from OB_WRP_SECTOR_12 - * - * @param Banks Enable write protection on all the sectors for the specific bank - * This parameter can be one of the following values: - * @arg FLASH_BANK_1: WRP on all sectors of bank1 - * @arg FLASH_BANK_2: WRP on all sectors of bank2 - * @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2 - * - * @retval HAL FLASH State - */ -static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_WRP_SECTOR(WRPSector)); - assert_param(IS_FLASH_BANK(Banks)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - if (((WRPSector == OB_WRP_SECTOR_All) && ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))) || - (WRPSector < OB_WRP_SECTOR_12)) - { - if (WRPSector == OB_WRP_SECTOR_All) - { - /*Write protection on all sector of BANK1*/ - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS &= (~(WRPSector >> 12)); - } - else - { - /*Write protection done on sectors of BANK1*/ - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS &= (~WRPSector); - } - } - else - { - /*Write protection done on sectors of BANK2*/ - *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS &= (~(WRPSector >> 12)); - } - - /*Write protection on all sector of BANK2*/ - if ((WRPSector == OB_WRP_SECTOR_All) && (Banks == FLASH_BANK_BOTH)) - { - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS &= (~(WRPSector >> 12)); - } - } - - } - return status; -} - -/** - * @brief Disable the write protection of the desired bank1 or bank 2 sectors - * - * @note When the memory read protection level is selected (RDP level = 1), - * it is not possible to program or erase the flash sector i if CortexM4 - * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 - * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1). - * - * @param WRPSector specifies the sector(s) to be write protected. - * This parameter can be one of the following values: - * @arg WRPSector: A value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_23 - * @arg OB_WRP_Sector_All - * @note BANK2 starts from OB_WRP_SECTOR_12 - * - * @param Banks Disable write protection on all the sectors for the specific bank - * This parameter can be one of the following values: - * @arg FLASH_BANK_1: Bank1 to be erased - * @arg FLASH_BANK_2: Bank2 to be erased - * @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased - * - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_WRP_SECTOR(WRPSector)); - assert_param(IS_FLASH_BANK(Banks)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - if (((WRPSector == OB_WRP_SECTOR_All) && ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))) || - (WRPSector < OB_WRP_SECTOR_12)) - { - if (WRPSector == OB_WRP_SECTOR_All) - { - /*Write protection on all sector of BANK1*/ - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS |= (uint16_t)(WRPSector >> 12); - } - else - { - /*Write protection done on sectors of BANK1*/ - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS |= (uint16_t)WRPSector; - } - } - else - { - /*Write protection done on sectors of BANK2*/ - *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS |= (uint16_t)(WRPSector >> 12); - } - - /*Write protection on all sector of BANK2*/ - if ((WRPSector == OB_WRP_SECTOR_All) && (Banks == FLASH_BANK_BOTH)) - { - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS |= (uint16_t)(WRPSector >> 12); - } - } - - } - - return status; -} - -/** - * @brief Configure the Dual Bank Boot. - * - * @note This function can be used only for STM32F42xxx/43xxx devices. - * - * @param BootConfig specifies the Dual Bank Boot Option byte. - * This parameter can be one of the following values: - * @arg OB_Dual_BootEnabled: Dual Bank Boot Enable - * @arg OB_Dual_BootDisabled: Dual Bank Boot Disabled - * @retval None - */ -static HAL_StatusTypeDef FLASH_OB_BootConfig(uint8_t BootConfig) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_BOOT(BootConfig)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - /* Set Dual Bank Boot */ - *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS &= (~FLASH_OPTCR_BFB2); - *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= BootConfig; - } - - return status; -} - -/** - * @brief Enable the read/write protection (PCROP) of the desired - * sectors of Bank 1 and/or Bank 2. - * @note This function can be used only for STM32F42xxx/43xxx devices. - * @param SectorBank1 Specifies the sector(s) to be read/write protected or unprotected for bank1. - * This parameter can be one of the following values: - * @arg OB_PCROP: A value between OB_PCROP_SECTOR_0 and OB_PCROP_SECTOR_11 - * @arg OB_PCROP_SECTOR__All - * @param SectorBank2 Specifies the sector(s) to be read/write protected or unprotected for bank2. - * This parameter can be one of the following values: - * @arg OB_PCROP: A value between OB_PCROP_SECTOR_12 and OB_PCROP_SECTOR_23 - * @arg OB_PCROP_SECTOR__All - * @param Banks Enable PCROP protection on all the sectors for the specific bank - * This parameter can be one of the following values: - * @arg FLASH_BANK_1: WRP on all sectors of bank1 - * @arg FLASH_BANK_2: WRP on all sectors of bank2 - * @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2 - * - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks) -{ - HAL_StatusTypeDef status = HAL_OK; - - assert_param(IS_FLASH_BANK(Banks)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - if ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH)) - { - assert_param(IS_OB_PCROP(SectorBank1)); - /*Write protection done on sectors of BANK1*/ - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS |= (uint16_t)SectorBank1; - } - else - { - assert_param(IS_OB_PCROP(SectorBank2)); - /*Write protection done on sectors of BANK2*/ - *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS |= (uint16_t)SectorBank2; - } - - /*Write protection on all sector of BANK2*/ - if (Banks == FLASH_BANK_BOTH) - { - assert_param(IS_OB_PCROP(SectorBank2)); - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - /*Write protection done on sectors of BANK2*/ - *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS |= (uint16_t)SectorBank2; - } - } - - } - - return status; -} - - -/** - * @brief Disable the read/write protection (PCROP) of the desired - * sectors of Bank 1 and/or Bank 2. - * @note This function can be used only for STM32F42xxx/43xxx devices. - * @param SectorBank1 specifies the sector(s) to be read/write protected or unprotected for bank1. - * This parameter can be one of the following values: - * @arg OB_PCROP: A value between OB_PCROP_SECTOR_0 and OB_PCROP_SECTOR_11 - * @arg OB_PCROP_SECTOR__All - * @param SectorBank2 Specifies the sector(s) to be read/write protected or unprotected for bank2. - * This parameter can be one of the following values: - * @arg OB_PCROP: A value between OB_PCROP_SECTOR_12 and OB_PCROP_SECTOR_23 - * @arg OB_PCROP_SECTOR__All - * @param Banks Disable PCROP protection on all the sectors for the specific bank - * This parameter can be one of the following values: - * @arg FLASH_BANK_1: WRP on all sectors of bank1 - * @arg FLASH_BANK_2: WRP on all sectors of bank2 - * @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2 - * - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_FLASH_BANK(Banks)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - if ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH)) - { - assert_param(IS_OB_PCROP(SectorBank1)); - /*Write protection done on sectors of BANK1*/ - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS &= (~SectorBank1); - } - else - { - /*Write protection done on sectors of BANK2*/ - assert_param(IS_OB_PCROP(SectorBank2)); - *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS &= (~SectorBank2); - } - - /*Write protection on all sector of BANK2*/ - if (Banks == FLASH_BANK_BOTH) - { - assert_param(IS_OB_PCROP(SectorBank2)); - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - /*Write protection done on sectors of BANK2*/ - *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS &= (~SectorBank2); - } - } - - } - - return status; - -} - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ - defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\ - defined(STM32F423xx) -/** - * @brief Mass erase of FLASH memory - * @param VoltageRange The device voltage range which defines the erase parallelism. - * This parameter can be one of the following values: - * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, - * the operation will be done by byte (8-bit) - * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V, - * the operation will be done by half word (16-bit) - * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V, - * the operation will be done by word (32-bit) - * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, - * the operation will be done by double word (64-bit) - * - * @param Banks Banks to be erased - * This parameter can be one of the following values: - * @arg FLASH_BANK_1: Bank1 to be erased - * - * @retval None - */ -static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks) -{ - /* Check the parameters */ - assert_param(IS_VOLTAGERANGE(VoltageRange)); - assert_param(IS_FLASH_BANK(Banks)); - - /* If the previous operation is completed, proceed to erase all sectors */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); - FLASH->CR |= FLASH_CR_MER; - FLASH->CR |= FLASH_CR_STRT | ((uint32_t)VoltageRange << 8U); -} - -/** - * @brief Erase the specified FLASH memory sector - * @param Sector FLASH sector to erase - * The value of this parameter depend on device used within the same series - * @param VoltageRange The device voltage range which defines the erase parallelism. - * This parameter can be one of the following values: - * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, - * the operation will be done by byte (8-bit) - * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V, - * the operation will be done by half word (16-bit) - * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V, - * the operation will be done by word (32-bit) - * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, - * the operation will be done by double word (64-bit) - * - * @retval None - */ -void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange) -{ - uint32_t tmp_psize = 0U; - - /* Check the parameters */ - assert_param(IS_FLASH_SECTOR(Sector)); - assert_param(IS_VOLTAGERANGE(VoltageRange)); - - if (VoltageRange == FLASH_VOLTAGE_RANGE_1) - { - tmp_psize = FLASH_PSIZE_BYTE; - } - else if (VoltageRange == FLASH_VOLTAGE_RANGE_2) - { - tmp_psize = FLASH_PSIZE_HALF_WORD; - } - else if (VoltageRange == FLASH_VOLTAGE_RANGE_3) - { - tmp_psize = FLASH_PSIZE_WORD; - } - else - { - tmp_psize = FLASH_PSIZE_DOUBLE_WORD; - } - - /* If the previous operation is completed, proceed to erase the sector */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); - FLASH->CR |= tmp_psize; - CLEAR_BIT(FLASH->CR, FLASH_CR_SNB); - FLASH->CR |= FLASH_CR_SER | (Sector << FLASH_CR_SNB_Pos); - FLASH->CR |= FLASH_CR_STRT; -} - -/** - * @brief Enable the write protection of the desired bank 1 sectors - * - * @note When the memory read protection level is selected (RDP level = 1), - * it is not possible to program or erase the flash sector i if CortexM4 - * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 - * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1). - * - * @param WRPSector specifies the sector(s) to be write protected. - * The value of this parameter depend on device used within the same series - * - * @param Banks Enable write protection on all the sectors for the specific bank - * This parameter can be one of the following values: - * @arg FLASH_BANK_1: WRP on all sectors of bank1 - * - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_WRP_SECTOR(WRPSector)); - assert_param(IS_FLASH_BANK(Banks)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS &= (~WRPSector); - } - - return status; -} - -/** - * @brief Disable the write protection of the desired bank 1 sectors - * - * @note When the memory read protection level is selected (RDP level = 1), - * it is not possible to program or erase the flash sector i if CortexM4 - * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 - * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1). - * - * @param WRPSector specifies the sector(s) to be write protected. - * The value of this parameter depend on device used within the same series - * - * @param Banks Enable write protection on all the sectors for the specific bank - * This parameter can be one of the following values: - * @arg FLASH_BANK_1: WRP on all sectors of bank1 - * - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_WRP_SECTOR(WRPSector)); - assert_param(IS_FLASH_BANK(Banks)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS |= (uint16_t)WRPSector; - } - - return status; -} -#endif /* STM32F40xxx || STM32F41xxx || STM32F401xx || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx - STM32F413xx || STM32F423xx */ - -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\ - defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief Enable the read/write protection (PCROP) of the desired sectors. - * @note This function can be used only for STM32F401xx devices. - * @param Sector specifies the sector(s) to be read/write protected or unprotected. - * This parameter can be one of the following values: - * @arg OB_PCROP: A value between OB_PCROP_Sector0 and OB_PCROP_Sector5 - * @arg OB_PCROP_Sector_All - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t Sector) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_PCROP(Sector)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS |= (uint16_t)Sector; - } - - return status; -} - - -/** - * @brief Disable the read/write protection (PCROP) of the desired sectors. - * @note This function can be used only for STM32F401xx devices. - * @param Sector specifies the sector(s) to be read/write protected or unprotected. - * This parameter can be one of the following values: - * @arg OB_PCROP: A value between OB_PCROP_Sector0 and OB_PCROP_Sector5 - * @arg OB_PCROP_Sector_All - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t Sector) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_PCROP(Sector)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS &= (~Sector); - } - - return status; - -} -#endif /* STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx - STM32F413xx || STM32F423xx */ - -/** - * @brief Set the read protection level. - * @param Level specifies the read protection level. - * This parameter can be one of the following values: - * @arg OB_RDP_LEVEL_0: No protection - * @arg OB_RDP_LEVEL_1: Read protection of the memory - * @arg OB_RDP_LEVEL_2: Full chip protection - * - * @note WARNING: When enabling OB_RDP level 2 it's no more possible to go back to level 1 or 0 - * - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t Level) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_RDP_LEVEL(Level)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - *(__IO uint8_t *)OPTCR_BYTE1_ADDRESS = Level; - } - - return status; -} - -/** - * @brief Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. - * @param Iwdg Selects the IWDG mode - * This parameter can be one of the following values: - * @arg OB_IWDG_SW: Software IWDG selected - * @arg OB_IWDG_HW: Hardware IWDG selected - * @param Stop Reset event when entering STOP mode. - * This parameter can be one of the following values: - * @arg OB_STOP_NO_RST: No reset generated when entering in STOP - * @arg OB_STOP_RST: Reset generated when entering in STOP - * @param Stdby Reset event when entering Standby mode. - * This parameter can be one of the following values: - * @arg OB_STDBY_NO_RST: No reset generated when entering in STANDBY - * @arg OB_STDBY_RST: Reset generated when entering in STANDBY - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t Iwdg, uint8_t Stop, uint8_t Stdby) -{ - uint8_t optiontmp = 0xFF; - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_IWDG_SOURCE(Iwdg)); - assert_param(IS_OB_STOP_SOURCE(Stop)); - assert_param(IS_OB_STDBY_SOURCE(Stdby)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if (status == HAL_OK) - { - /* Mask OPTLOCK, OPTSTRT, BOR_LEV and BFB2 bits */ - optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE0_ADDRESS) & (uint8_t)0x1F); - - /* Update User Option Byte */ - *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS = Iwdg | (uint8_t)(Stdby | (uint8_t)(Stop | ((uint8_t)optiontmp))); - } - - return status; -} - -/** - * @brief Set the BOR Level. - * @param Level specifies the Option Bytes BOR Reset Level. - * This parameter can be one of the following values: - * @arg OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V - * @arg OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V - * @arg OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V - * @arg OB_BOR_OFF: Supply voltage ranges from 1.62 to 2.1 V - * @retval HAL Status - */ -static HAL_StatusTypeDef FLASH_OB_BOR_LevelConfig(uint8_t Level) -{ - /* Check the parameters */ - assert_param(IS_OB_BOR_LEVEL(Level)); - - /* Set the BOR Level */ - *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS &= (~FLASH_OPTCR_BOR_LEV); - *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= Level; - - return HAL_OK; - -} - -/** - * @brief Return the FLASH User Option Byte value. - * @retval uint8_t FLASH User Option Bytes values: IWDG_SW(Bit0), RST_STOP(Bit1) - * and RST_STDBY(Bit2). - */ -static uint8_t FLASH_OB_GetUser(void) -{ - /* Return the User Option Byte */ - return ((uint8_t)(FLASH->OPTCR & 0xE0)); -} - -/** - * @brief Return the FLASH Write Protection Option Bytes value. - * @retval uint16_t FLASH Write Protection Option Bytes value - */ -static uint16_t FLASH_OB_GetWRP(void) -{ - /* Return the FLASH write protection Register value */ - return (*(__IO uint16_t *)(OPTCR_BYTE2_ADDRESS)); -} - -/** - * @brief Returns the FLASH Read Protection level. - * @retval FLASH ReadOut Protection Status: - * This parameter can be one of the following values: - * @arg OB_RDP_LEVEL_0: No protection - * @arg OB_RDP_LEVEL_1: Read protection of the memory - * @arg OB_RDP_LEVEL_2: Full chip protection - */ -static uint8_t FLASH_OB_GetRDP(void) -{ - uint8_t readstatus = OB_RDP_LEVEL_0; - - if (*(__IO uint8_t *)(OPTCR_BYTE1_ADDRESS) == (uint8_t)OB_RDP_LEVEL_2) - { - readstatus = OB_RDP_LEVEL_2; - } - else if (*(__IO uint8_t *)(OPTCR_BYTE1_ADDRESS) == (uint8_t)OB_RDP_LEVEL_0) - { - readstatus = OB_RDP_LEVEL_0; - } - else - { - readstatus = OB_RDP_LEVEL_1; - } - - return readstatus; -} - -/** - * @brief Returns the FLASH BOR level. - * @retval uint8_t The FLASH BOR level: - * - OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V - * - OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V - * - OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V - * - OB_BOR_OFF : Supply voltage ranges from 1.62 to 2.1 V - */ -static uint8_t FLASH_OB_GetBOR(void) -{ - /* Return the FLASH BOR level */ - return (uint8_t)(*(__IO uint8_t *)(OPTCR_BYTE0_ADDRESS) & (uint8_t)0x0C); -} - -/** - * @brief Flush the instruction and data caches - * @retval None - */ -void FLASH_FlushCaches(void) -{ - /* Flush instruction cache */ - if (READ_BIT(FLASH->ACR, FLASH_ACR_ICEN) != RESET) - { - /* Disable instruction cache */ - __HAL_FLASH_INSTRUCTION_CACHE_DISABLE(); - /* Reset instruction cache */ - __HAL_FLASH_INSTRUCTION_CACHE_RESET(); - /* Enable instruction cache */ - __HAL_FLASH_INSTRUCTION_CACHE_ENABLE(); - } - - /* Flush data cache */ - if (READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != RESET) - { - /* Disable data cache */ - __HAL_FLASH_DATA_CACHE_DISABLE(); - /* Reset data cache */ - __HAL_FLASH_DATA_CACHE_RESET(); - /* Enable data cache */ - __HAL_FLASH_DATA_CACHE_ENABLE(); - } -} - -/** - * @} - */ - -#endif /* HAL_FLASH_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - +/** + ****************************************************************************** + * @file stm32f4xx_hal_flash_ex.c + * @author MCD Application Team + * @brief Extended FLASH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the FLASH extension peripheral: + * + Extended programming operations functions + * + @verbatim + ============================================================================== + ##### Flash Extension features ##### + ============================================================================== + + [..] Comparing to other previous devices, the FLASH interface for STM32F427xx/437xx and + STM32F429xx/439xx devices contains the following additional features + + (+) Capacity up to 2 Mbyte with dual bank architecture supporting read-while-write + capability (RWW) + (+) Dual bank memory organization + (+) PCROP protection for all banks + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure and program the FLASH memory + of all STM32F427xx/437xx, STM32F429xx/439xx, STM32F469xx/479xx and STM32F446xx + devices. It includes + (#) FLASH Memory Erase functions: + (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and + HAL_FLASH_Lock() functions + (++) Erase function: Erase sector, erase all sectors + (++) There are two modes of erase : + (+++) Polling Mode using HAL_FLASHEx_Erase() + (+++) Interrupt Mode using HAL_FLASHEx_Erase_IT() + + (#) Option Bytes Programming functions: Use HAL_FLASHEx_OBProgram() to : + (++) Set/Reset the write protection + (++) Set the Read protection Level + (++) Set the BOR level + (++) Program the user Option Bytes + (#) Advanced Option Bytes Programming functions: Use HAL_FLASHEx_AdvOBProgram() to : + (++) Extended space (bank 2) erase function + (++) Full FLASH space (2 Mo) erase (bank 1 and bank 2) + (++) Dual Boot activation + (++) Write protection configuration for bank 2 + (++) PCROP protection configuration and control for both banks + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup FLASHEx FLASHEx + * @brief FLASH HAL Extension module driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup FLASHEx_Private_Constants + * @{ + */ +#define FLASH_TIMEOUT_VALUE 50000U /* 50 s */ +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @addtogroup FLASHEx_Private_Variables + * @{ + */ +extern FLASH_ProcessTypeDef pFlash; +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup FLASHEx_Private_Functions + * @{ + */ +/* Option bytes control */ +static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks); +static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks); +static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks); +static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t Level); +static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t Iwdg, uint8_t Stop, uint8_t Stdby); +static HAL_StatusTypeDef FLASH_OB_BOR_LevelConfig(uint8_t Level); +static uint8_t FLASH_OB_GetUser(void); +static uint16_t FLASH_OB_GetWRP(void); +static uint8_t FLASH_OB_GetRDP(void); +static uint8_t FLASH_OB_GetBOR(void); + +#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) ||\ + defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\ + defined(STM32F423xx) +static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t Sector); +static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t Sector); +#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx + STM32F413xx || STM32F423xx */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) +static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks); +static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks); +static HAL_StatusTypeDef FLASH_OB_BootConfig(uint8_t BootConfig); +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ + +extern HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions + * @{ + */ + +/** @defgroup FLASHEx_Exported_Functions_Group1 Extended IO operation functions + * @brief Extended IO operation functions + * +@verbatim + =============================================================================== + ##### Extended programming operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the Extension FLASH + programming operations. + +@endverbatim + * @{ + */ +/** + * @brief Perform a mass erase or erase the specified FLASH memory sectors + * @param[in] pEraseInit pointer to an FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * + * @param[out] SectorError pointer to variable that + * contains the configuration information on faulty sector in case of error + * (0xFFFFFFFFU means that all the sectors have been correctly erased) + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError) +{ + HAL_StatusTypeDef status = HAL_ERROR; + uint32_t index = 0U; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + /*Initialization of SectorError variable*/ + *SectorError = 0xFFFFFFFFU; + + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) + { + /*Mass erase to be done*/ + FLASH_MassErase((uint8_t) pEraseInit->VoltageRange, pEraseInit->Banks); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* if the erase operation is completed, disable the MER Bit */ + FLASH->CR &= (~FLASH_MER_BIT); + } + else + { + /* Check the parameters */ + assert_param(IS_FLASH_NBSECTORS(pEraseInit->NbSectors + pEraseInit->Sector)); + + /* Erase by sector by sector to be done*/ + for (index = pEraseInit->Sector; index < (pEraseInit->NbSectors + pEraseInit->Sector); index++) + { + FLASH_Erase_Sector(index, (uint8_t) pEraseInit->VoltageRange); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the erase operation is completed, disable the SER and SNB Bits */ + CLEAR_BIT(FLASH->CR, (FLASH_CR_SER | FLASH_CR_SNB)); + + if (status != HAL_OK) + { + /* In case of error, stop erase procedure and return the faulty sector*/ + *SectorError = index; + break; + } + } + } + /* Flush the caches to be sure of the data consistency */ + FLASH_FlushCaches(); + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Perform a mass erase or erase the specified FLASH memory sectors with interrupt enabled + * @param pEraseInit pointer to an FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + + /* Enable End of FLASH Operation interrupt */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP); + + /* Enable Error source interrupt */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_ERR); + + /* Clear pending flags (if any) */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | \ + FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR); + + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) + { + /*Mass erase to be done*/ + pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE; + pFlash.Bank = pEraseInit->Banks; + FLASH_MassErase((uint8_t) pEraseInit->VoltageRange, pEraseInit->Banks); + } + else + { + /* Erase by sector to be done*/ + + /* Check the parameters */ + assert_param(IS_FLASH_NBSECTORS(pEraseInit->NbSectors + pEraseInit->Sector)); + + pFlash.ProcedureOnGoing = FLASH_PROC_SECTERASE; + pFlash.NbSectorsToErase = pEraseInit->NbSectors; + pFlash.Sector = pEraseInit->Sector; + pFlash.VoltageForErase = (uint8_t)pEraseInit->VoltageRange; + + /*Erase 1st sector and wait for IT*/ + FLASH_Erase_Sector(pEraseInit->Sector, pEraseInit->VoltageRange); + } + + return status; +} + +/** + * @brief Program option bytes + * @param pOBInit pointer to an FLASH_OBInitStruct structure that + * contains the configuration information for the programming. + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_OPTIONBYTE(pOBInit->OptionType)); + + /*Write protection configuration*/ + if ((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP) + { + assert_param(IS_WRPSTATE(pOBInit->WRPState)); + if (pOBInit->WRPState == OB_WRPSTATE_ENABLE) + { + /*Enable of Write protection on the selected Sector*/ + status = FLASH_OB_EnableWRP(pOBInit->WRPSector, pOBInit->Banks); + } + else + { + /*Disable of Write protection on the selected Sector*/ + status = FLASH_OB_DisableWRP(pOBInit->WRPSector, pOBInit->Banks); + } + } + + /*Read protection configuration*/ + if ((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP) + { + status = FLASH_OB_RDP_LevelConfig(pOBInit->RDPLevel); + } + + /*USER configuration*/ + if ((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER) + { + status = FLASH_OB_UserConfig(pOBInit->USERConfig & OB_IWDG_SW, + pOBInit->USERConfig & OB_STOP_NO_RST, + pOBInit->USERConfig & OB_STDBY_NO_RST); + } + + /*BOR Level configuration*/ + if ((pOBInit->OptionType & OPTIONBYTE_BOR) == OPTIONBYTE_BOR) + { + status = FLASH_OB_BOR_LevelConfig(pOBInit->BORLevel); + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Get the Option byte configuration + * @param pOBInit pointer to an FLASH_OBInitStruct structure that + * contains the configuration information for the programming. + * + * @retval None + */ +void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit) +{ + pOBInit->OptionType = OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_BOR; + + /*Get WRP*/ + pOBInit->WRPSector = (uint32_t)FLASH_OB_GetWRP(); + + /*Get RDP Level*/ + pOBInit->RDPLevel = (uint32_t)FLASH_OB_GetRDP(); + + /*Get USER*/ + pOBInit->USERConfig = (uint8_t)FLASH_OB_GetUser(); + + /*Get BOR Level*/ + pOBInit->BORLevel = (uint32_t)FLASH_OB_GetBOR(); +} + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ + defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ + defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ + defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ + defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +/** + * @brief Program option bytes + * @param pAdvOBInit pointer to an FLASH_AdvOBProgramInitTypeDef structure that + * contains the configuration information for the programming. + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_AdvOBProgram(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Check the parameters */ + assert_param(IS_OBEX(pAdvOBInit->OptionType)); + + /*Program PCROP option byte*/ + if (((pAdvOBInit->OptionType) & OPTIONBYTE_PCROP) == OPTIONBYTE_PCROP) + { + /* Check the parameters */ + assert_param(IS_PCROPSTATE(pAdvOBInit->PCROPState)); + if ((pAdvOBInit->PCROPState) == OB_PCROP_STATE_ENABLE) + { + /*Enable of Write protection on the selected Sector*/ +#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\ + defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ + defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) + status = FLASH_OB_EnablePCROP(pAdvOBInit->Sectors); +#else /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */ + status = FLASH_OB_EnablePCROP(pAdvOBInit->SectorsBank1, pAdvOBInit->SectorsBank2, pAdvOBInit->Banks); +#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || + STM32F413xx || STM32F423xx */ + } + else + { + /*Disable of Write protection on the selected Sector*/ +#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\ + defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ + defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) + status = FLASH_OB_DisablePCROP(pAdvOBInit->Sectors); +#else /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */ + status = FLASH_OB_DisablePCROP(pAdvOBInit->SectorsBank1, pAdvOBInit->SectorsBank2, pAdvOBInit->Banks); +#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || + STM32F413xx || STM32F423xx */ + } + } + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) + /*Program BOOT config option byte*/ + if (((pAdvOBInit->OptionType) & OPTIONBYTE_BOOTCONFIG) == OPTIONBYTE_BOOTCONFIG) + { + status = FLASH_OB_BootConfig(pAdvOBInit->BootConfig); + } +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ + + return status; +} + +/** + * @brief Get the OBEX byte configuration + * @param pAdvOBInit pointer to an FLASH_AdvOBProgramInitTypeDef structure that + * contains the configuration information for the programming. + * + * @retval None + */ +void HAL_FLASHEx_AdvOBGetConfig(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit) +{ +#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\ + defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ + defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) + /*Get Sector*/ + pAdvOBInit->Sectors = (*(__IO uint16_t *)(OPTCR_BYTE2_ADDRESS)); +#else /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */ + /*Get Sector for Bank1*/ + pAdvOBInit->SectorsBank1 = (*(__IO uint16_t *)(OPTCR_BYTE2_ADDRESS)); + + /*Get Sector for Bank2*/ + pAdvOBInit->SectorsBank2 = (*(__IO uint16_t *)(OPTCR1_BYTE2_ADDRESS)); + + /*Get Boot config OB*/ + pAdvOBInit->BootConfig = *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS; +#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || + STM32F413xx || STM32F423xx */ +} + +/** + * @brief Select the Protection Mode + * + * @note After PCROP activated Option Byte modification NOT POSSIBLE! excepted + * Global Read Out Protection modification (from level1 to level0) + * @note Once SPRMOD bit is active unprotection of a protected sector is not possible + * @note Read a protected sector will set RDERR Flag and write a protected sector will set WRPERR Flag + * @note This function can be used only for STM32F42xxx/STM32F43xxx/STM32F401xx/STM32F411xx/STM32F446xx/ + * STM32F469xx/STM32F479xx/STM32F412xx/STM32F413xx devices. + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_OB_SelectPCROP(void) +{ + uint8_t optiontmp = 0xFF; + + /* Mask SPRMOD bit */ + optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE3_ADDRESS) & (uint8_t)0x7F); + + /* Update Option Byte */ + *(__IO uint8_t *)OPTCR_BYTE3_ADDRESS = (uint8_t)(OB_PCROP_SELECTED | optiontmp); + + return HAL_OK; +} + +/** + * @brief Deselect the Protection Mode + * + * @note After PCROP activated Option Byte modification NOT POSSIBLE! excepted + * Global Read Out Protection modification (from level1 to level0) + * @note Once SPRMOD bit is active unprotection of a protected sector is not possible + * @note Read a protected sector will set RDERR Flag and write a protected sector will set WRPERR Flag + * @note This function can be used only for STM32F42xxx/STM32F43xxx/STM32F401xx/STM32F411xx/STM32F446xx/ + * STM32F469xx/STM32F479xx/STM32F412xx/STM32F413xx devices. + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_OB_DeSelectPCROP(void) +{ + uint8_t optiontmp = 0xFF; + + /* Mask SPRMOD bit */ + optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE3_ADDRESS) & (uint8_t)0x7F); + + /* Update Option Byte */ + *(__IO uint8_t *)OPTCR_BYTE3_ADDRESS = (uint8_t)(OB_PCROP_DESELECTED | optiontmp); + + return HAL_OK; +} +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F410xx ||\ + STM32F411xE || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || + STM32F413xx || STM32F423xx */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) +/** + * @brief Returns the FLASH Write Protection Option Bytes value for Bank 2 + * @note This function can be used only for STM32F42xxx/STM32F43xxx/STM32F469xx/STM32F479xx devices. + * @retval The FLASH Write Protection Option Bytes value + */ +uint16_t HAL_FLASHEx_OB_GetBank2WRP(void) +{ + /* Return the FLASH write protection Register value */ + return (*(__IO uint16_t *)(OPTCR1_BYTE2_ADDRESS)); +} +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ + +/** + * @} + */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) +/** + * @brief Full erase of FLASH memory sectors + * @param VoltageRange The device voltage range which defines the erase parallelism. + * This parameter can be one of the following values: + * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, + * the operation will be done by byte (8-bit) + * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V, + * the operation will be done by half word (16-bit) + * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V, + * the operation will be done by word (32-bit) + * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, + * the operation will be done by double word (64-bit) + * + * @param Banks Banks to be erased + * This parameter can be one of the following values: + * @arg FLASH_BANK_1: Bank1 to be erased + * @arg FLASH_BANK_2: Bank2 to be erased + * @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased + * + * @retval HAL Status + */ +static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks) +{ + /* Check the parameters */ + assert_param(IS_VOLTAGERANGE(VoltageRange)); + assert_param(IS_FLASH_BANK(Banks)); + + /* if the previous operation is completed, proceed to erase all sectors */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); + + if (Banks == FLASH_BANK_BOTH) + { + /* bank1 & bank2 will be erased*/ + FLASH->CR |= FLASH_MER_BIT; + } + else if (Banks == FLASH_BANK_1) + { + /*Only bank1 will be erased*/ + FLASH->CR |= FLASH_CR_MER1; + } + else + { + /*Only bank2 will be erased*/ + FLASH->CR |= FLASH_CR_MER2; + } + FLASH->CR |= FLASH_CR_STRT | ((uint32_t)VoltageRange << 8U); +} + +/** + * @brief Erase the specified FLASH memory sector + * @param Sector FLASH sector to erase + * The value of this parameter depend on device used within the same series + * @param VoltageRange The device voltage range which defines the erase parallelism. + * This parameter can be one of the following values: + * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, + * the operation will be done by byte (8-bit) + * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V, + * the operation will be done by half word (16-bit) + * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V, + * the operation will be done by word (32-bit) + * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, + * the operation will be done by double word (64-bit) + * + * @retval None + */ +void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange) +{ + uint32_t tmp_psize = 0U; + + /* Check the parameters */ + assert_param(IS_FLASH_SECTOR(Sector)); + assert_param(IS_VOLTAGERANGE(VoltageRange)); + + if (VoltageRange == FLASH_VOLTAGE_RANGE_1) + { + tmp_psize = FLASH_PSIZE_BYTE; + } + else if (VoltageRange == FLASH_VOLTAGE_RANGE_2) + { + tmp_psize = FLASH_PSIZE_HALF_WORD; + } + else if (VoltageRange == FLASH_VOLTAGE_RANGE_3) + { + tmp_psize = FLASH_PSIZE_WORD; + } + else + { + tmp_psize = FLASH_PSIZE_DOUBLE_WORD; + } + + /* Need to add offset of 4 when sector higher than FLASH_SECTOR_11 */ + if (Sector > FLASH_SECTOR_11) + { + Sector += 4U; + } + /* If the previous operation is completed, proceed to erase the sector */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); + FLASH->CR |= tmp_psize; + CLEAR_BIT(FLASH->CR, FLASH_CR_SNB); + FLASH->CR |= FLASH_CR_SER | (Sector << FLASH_CR_SNB_Pos); + FLASH->CR |= FLASH_CR_STRT; +} + +/** + * @brief Enable the write protection of the desired bank1 or bank 2 sectors + * + * @note When the memory read protection level is selected (RDP level = 1), + * it is not possible to program or erase the flash sector i if CortexM4 + * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 + * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1). + * + * @param WRPSector specifies the sector(s) to be write protected. + * This parameter can be one of the following values: + * @arg WRPSector: A value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_23 + * @arg OB_WRP_SECTOR_All + * @note BANK2 starts from OB_WRP_SECTOR_12 + * + * @param Banks Enable write protection on all the sectors for the specific bank + * This parameter can be one of the following values: + * @arg FLASH_BANK_1: WRP on all sectors of bank1 + * @arg FLASH_BANK_2: WRP on all sectors of bank2 + * @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2 + * + * @retval HAL FLASH State + */ +static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_OB_WRP_SECTOR(WRPSector)); + assert_param(IS_FLASH_BANK(Banks)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + if (((WRPSector == OB_WRP_SECTOR_All) && ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))) || + (WRPSector < OB_WRP_SECTOR_12)) + { + if (WRPSector == OB_WRP_SECTOR_All) + { + /*Write protection on all sector of BANK1*/ + *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS &= (~(WRPSector >> 12)); + } + else + { + /*Write protection done on sectors of BANK1*/ + *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS &= (~WRPSector); + } + } + else + { + /*Write protection done on sectors of BANK2*/ + *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS &= (~(WRPSector >> 12)); + } + + /*Write protection on all sector of BANK2*/ + if ((WRPSector == OB_WRP_SECTOR_All) && (Banks == FLASH_BANK_BOTH)) + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS &= (~(WRPSector >> 12)); + } + } + + } + return status; +} + +/** + * @brief Disable the write protection of the desired bank1 or bank 2 sectors + * + * @note When the memory read protection level is selected (RDP level = 1), + * it is not possible to program or erase the flash sector i if CortexM4 + * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 + * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1). + * + * @param WRPSector specifies the sector(s) to be write protected. + * This parameter can be one of the following values: + * @arg WRPSector: A value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_23 + * @arg OB_WRP_Sector_All + * @note BANK2 starts from OB_WRP_SECTOR_12 + * + * @param Banks Disable write protection on all the sectors for the specific bank + * This parameter can be one of the following values: + * @arg FLASH_BANK_1: Bank1 to be erased + * @arg FLASH_BANK_2: Bank2 to be erased + * @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased + * + * @retval HAL Status + */ +static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_OB_WRP_SECTOR(WRPSector)); + assert_param(IS_FLASH_BANK(Banks)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + if (((WRPSector == OB_WRP_SECTOR_All) && ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))) || + (WRPSector < OB_WRP_SECTOR_12)) + { + if (WRPSector == OB_WRP_SECTOR_All) + { + /*Write protection on all sector of BANK1*/ + *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS |= (uint16_t)(WRPSector >> 12); + } + else + { + /*Write protection done on sectors of BANK1*/ + *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS |= (uint16_t)WRPSector; + } + } + else + { + /*Write protection done on sectors of BANK2*/ + *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS |= (uint16_t)(WRPSector >> 12); + } + + /*Write protection on all sector of BANK2*/ + if ((WRPSector == OB_WRP_SECTOR_All) && (Banks == FLASH_BANK_BOTH)) + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS |= (uint16_t)(WRPSector >> 12); + } + } + + } + + return status; +} + +/** + * @brief Configure the Dual Bank Boot. + * + * @note This function can be used only for STM32F42xxx/43xxx devices. + * + * @param BootConfig specifies the Dual Bank Boot Option byte. + * This parameter can be one of the following values: + * @arg OB_Dual_BootEnabled: Dual Bank Boot Enable + * @arg OB_Dual_BootDisabled: Dual Bank Boot Disabled + * @retval None + */ +static HAL_StatusTypeDef FLASH_OB_BootConfig(uint8_t BootConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_OB_BOOT(BootConfig)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + /* Set Dual Bank Boot */ + *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS &= (~FLASH_OPTCR_BFB2); + *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= BootConfig; + } + + return status; +} + +/** + * @brief Enable the read/write protection (PCROP) of the desired + * sectors of Bank 1 and/or Bank 2. + * @note This function can be used only for STM32F42xxx/43xxx devices. + * @param SectorBank1 Specifies the sector(s) to be read/write protected or unprotected for bank1. + * This parameter can be one of the following values: + * @arg OB_PCROP: A value between OB_PCROP_SECTOR_0 and OB_PCROP_SECTOR_11 + * @arg OB_PCROP_SECTOR__All + * @param SectorBank2 Specifies the sector(s) to be read/write protected or unprotected for bank2. + * This parameter can be one of the following values: + * @arg OB_PCROP: A value between OB_PCROP_SECTOR_12 and OB_PCROP_SECTOR_23 + * @arg OB_PCROP_SECTOR__All + * @param Banks Enable PCROP protection on all the sectors for the specific bank + * This parameter can be one of the following values: + * @arg FLASH_BANK_1: WRP on all sectors of bank1 + * @arg FLASH_BANK_2: WRP on all sectors of bank2 + * @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2 + * + * @retval HAL Status + */ +static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_FLASH_BANK(Banks)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + if ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH)) + { + assert_param(IS_OB_PCROP(SectorBank1)); + /*Write protection done on sectors of BANK1*/ + *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS |= (uint16_t)SectorBank1; + } + else + { + assert_param(IS_OB_PCROP(SectorBank2)); + /*Write protection done on sectors of BANK2*/ + *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS |= (uint16_t)SectorBank2; + } + + /*Write protection on all sector of BANK2*/ + if (Banks == FLASH_BANK_BOTH) + { + assert_param(IS_OB_PCROP(SectorBank2)); + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + /*Write protection done on sectors of BANK2*/ + *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS |= (uint16_t)SectorBank2; + } + } + + } + + return status; +} + + +/** + * @brief Disable the read/write protection (PCROP) of the desired + * sectors of Bank 1 and/or Bank 2. + * @note This function can be used only for STM32F42xxx/43xxx devices. + * @param SectorBank1 specifies the sector(s) to be read/write protected or unprotected for bank1. + * This parameter can be one of the following values: + * @arg OB_PCROP: A value between OB_PCROP_SECTOR_0 and OB_PCROP_SECTOR_11 + * @arg OB_PCROP_SECTOR__All + * @param SectorBank2 Specifies the sector(s) to be read/write protected or unprotected for bank2. + * This parameter can be one of the following values: + * @arg OB_PCROP: A value between OB_PCROP_SECTOR_12 and OB_PCROP_SECTOR_23 + * @arg OB_PCROP_SECTOR__All + * @param Banks Disable PCROP protection on all the sectors for the specific bank + * This parameter can be one of the following values: + * @arg FLASH_BANK_1: WRP on all sectors of bank1 + * @arg FLASH_BANK_2: WRP on all sectors of bank2 + * @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2 + * + * @retval HAL Status + */ +static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_FLASH_BANK(Banks)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + if ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH)) + { + assert_param(IS_OB_PCROP(SectorBank1)); + /*Write protection done on sectors of BANK1*/ + *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS &= (~SectorBank1); + } + else + { + /*Write protection done on sectors of BANK2*/ + assert_param(IS_OB_PCROP(SectorBank2)); + *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS &= (~SectorBank2); + } + + /*Write protection on all sector of BANK2*/ + if (Banks == FLASH_BANK_BOTH) + { + assert_param(IS_OB_PCROP(SectorBank2)); + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + /*Write protection done on sectors of BANK2*/ + *(__IO uint16_t *)OPTCR1_BYTE2_ADDRESS &= (~SectorBank2); + } + } + + } + + return status; + +} + +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ + defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ + defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\ + defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\ + defined(STM32F423xx) +/** + * @brief Mass erase of FLASH memory + * @param VoltageRange The device voltage range which defines the erase parallelism. + * This parameter can be one of the following values: + * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, + * the operation will be done by byte (8-bit) + * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V, + * the operation will be done by half word (16-bit) + * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V, + * the operation will be done by word (32-bit) + * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, + * the operation will be done by double word (64-bit) + * + * @param Banks Banks to be erased + * This parameter can be one of the following values: + * @arg FLASH_BANK_1: Bank1 to be erased + * + * @retval None + */ +static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks) +{ + /* Check the parameters */ + assert_param(IS_VOLTAGERANGE(VoltageRange)); + assert_param(IS_FLASH_BANK(Banks)); + + /* If the previous operation is completed, proceed to erase all sectors */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); + FLASH->CR |= FLASH_CR_MER; + FLASH->CR |= FLASH_CR_STRT | ((uint32_t)VoltageRange << 8U); +} + +/** + * @brief Erase the specified FLASH memory sector + * @param Sector FLASH sector to erase + * The value of this parameter depend on device used within the same series + * @param VoltageRange The device voltage range which defines the erase parallelism. + * This parameter can be one of the following values: + * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, + * the operation will be done by byte (8-bit) + * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V, + * the operation will be done by half word (16-bit) + * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V, + * the operation will be done by word (32-bit) + * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, + * the operation will be done by double word (64-bit) + * + * @retval None + */ +void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange) +{ + uint32_t tmp_psize = 0U; + + /* Check the parameters */ + assert_param(IS_FLASH_SECTOR(Sector)); + assert_param(IS_VOLTAGERANGE(VoltageRange)); + + if (VoltageRange == FLASH_VOLTAGE_RANGE_1) + { + tmp_psize = FLASH_PSIZE_BYTE; + } + else if (VoltageRange == FLASH_VOLTAGE_RANGE_2) + { + tmp_psize = FLASH_PSIZE_HALF_WORD; + } + else if (VoltageRange == FLASH_VOLTAGE_RANGE_3) + { + tmp_psize = FLASH_PSIZE_WORD; + } + else + { + tmp_psize = FLASH_PSIZE_DOUBLE_WORD; + } + + /* If the previous operation is completed, proceed to erase the sector */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); + FLASH->CR |= tmp_psize; + CLEAR_BIT(FLASH->CR, FLASH_CR_SNB); + FLASH->CR |= FLASH_CR_SER | (Sector << FLASH_CR_SNB_Pos); + FLASH->CR |= FLASH_CR_STRT; +} + +/** + * @brief Enable the write protection of the desired bank 1 sectors + * + * @note When the memory read protection level is selected (RDP level = 1), + * it is not possible to program or erase the flash sector i if CortexM4 + * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 + * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1). + * + * @param WRPSector specifies the sector(s) to be write protected. + * The value of this parameter depend on device used within the same series + * + * @param Banks Enable write protection on all the sectors for the specific bank + * This parameter can be one of the following values: + * @arg FLASH_BANK_1: WRP on all sectors of bank1 + * + * @retval HAL Status + */ +static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_OB_WRP_SECTOR(WRPSector)); + assert_param(IS_FLASH_BANK(Banks)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS &= (~WRPSector); + } + + return status; +} + +/** + * @brief Disable the write protection of the desired bank 1 sectors + * + * @note When the memory read protection level is selected (RDP level = 1), + * it is not possible to program or erase the flash sector i if CortexM4 + * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 + * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1). + * + * @param WRPSector specifies the sector(s) to be write protected. + * The value of this parameter depend on device used within the same series + * + * @param Banks Enable write protection on all the sectors for the specific bank + * This parameter can be one of the following values: + * @arg FLASH_BANK_1: WRP on all sectors of bank1 + * + * @retval HAL Status + */ +static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_OB_WRP_SECTOR(WRPSector)); + assert_param(IS_FLASH_BANK(Banks)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS |= (uint16_t)WRPSector; + } + + return status; +} +#endif /* STM32F40xxx || STM32F41xxx || STM32F401xx || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx + STM32F413xx || STM32F423xx */ + +#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\ + defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ + defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +/** + * @brief Enable the read/write protection (PCROP) of the desired sectors. + * @note This function can be used only for STM32F401xx devices. + * @param Sector specifies the sector(s) to be read/write protected or unprotected. + * This parameter can be one of the following values: + * @arg OB_PCROP: A value between OB_PCROP_Sector0 and OB_PCROP_Sector5 + * @arg OB_PCROP_Sector_All + * @retval HAL Status + */ +static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t Sector) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_OB_PCROP(Sector)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS |= (uint16_t)Sector; + } + + return status; +} + + +/** + * @brief Disable the read/write protection (PCROP) of the desired sectors. + * @note This function can be used only for STM32F401xx devices. + * @param Sector specifies the sector(s) to be read/write protected or unprotected. + * This parameter can be one of the following values: + * @arg OB_PCROP: A value between OB_PCROP_Sector0 and OB_PCROP_Sector5 + * @arg OB_PCROP_Sector_All + * @retval HAL Status + */ +static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t Sector) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_OB_PCROP(Sector)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + *(__IO uint16_t *)OPTCR_BYTE2_ADDRESS &= (~Sector); + } + + return status; + +} +#endif /* STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx + STM32F413xx || STM32F423xx */ + +/** + * @brief Set the read protection level. + * @param Level specifies the read protection level. + * This parameter can be one of the following values: + * @arg OB_RDP_LEVEL_0: No protection + * @arg OB_RDP_LEVEL_1: Read protection of the memory + * @arg OB_RDP_LEVEL_2: Full chip protection + * + * @note WARNING: When enabling OB_RDP level 2 it's no more possible to go back to level 1 or 0 + * + * @retval HAL Status + */ +static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t Level) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_OB_RDP_LEVEL(Level)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + *(__IO uint8_t *)OPTCR_BYTE1_ADDRESS = Level; + } + + return status; +} + +/** + * @brief Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. + * @param Iwdg Selects the IWDG mode + * This parameter can be one of the following values: + * @arg OB_IWDG_SW: Software IWDG selected + * @arg OB_IWDG_HW: Hardware IWDG selected + * @param Stop Reset event when entering STOP mode. + * This parameter can be one of the following values: + * @arg OB_STOP_NO_RST: No reset generated when entering in STOP + * @arg OB_STOP_RST: Reset generated when entering in STOP + * @param Stdby Reset event when entering Standby mode. + * This parameter can be one of the following values: + * @arg OB_STDBY_NO_RST: No reset generated when entering in STANDBY + * @arg OB_STDBY_RST: Reset generated when entering in STANDBY + * @retval HAL Status + */ +static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t Iwdg, uint8_t Stop, uint8_t Stdby) +{ + uint8_t optiontmp = 0xFF; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_OB_IWDG_SOURCE(Iwdg)); + assert_param(IS_OB_STOP_SOURCE(Stop)); + assert_param(IS_OB_STDBY_SOURCE(Stdby)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + /* Mask OPTLOCK, OPTSTRT, BOR_LEV and BFB2 bits */ + optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE0_ADDRESS) & (uint8_t)0x1F); + + /* Update User Option Byte */ + *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS = Iwdg | (uint8_t)(Stdby | (uint8_t)(Stop | ((uint8_t)optiontmp))); + } + + return status; +} + +/** + * @brief Set the BOR Level. + * @param Level specifies the Option Bytes BOR Reset Level. + * This parameter can be one of the following values: + * @arg OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V + * @arg OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V + * @arg OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V + * @arg OB_BOR_OFF: Supply voltage ranges from 1.62 to 2.1 V + * @retval HAL Status + */ +static HAL_StatusTypeDef FLASH_OB_BOR_LevelConfig(uint8_t Level) +{ + /* Check the parameters */ + assert_param(IS_OB_BOR_LEVEL(Level)); + + /* Set the BOR Level */ + *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS &= (~FLASH_OPTCR_BOR_LEV); + *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= Level; + + return HAL_OK; + +} + +/** + * @brief Return the FLASH User Option Byte value. + * @retval uint8_t FLASH User Option Bytes values: IWDG_SW(Bit0), RST_STOP(Bit1) + * and RST_STDBY(Bit2). + */ +static uint8_t FLASH_OB_GetUser(void) +{ + /* Return the User Option Byte */ + return ((uint8_t)(FLASH->OPTCR & 0xE0)); +} + +/** + * @brief Return the FLASH Write Protection Option Bytes value. + * @retval uint16_t FLASH Write Protection Option Bytes value + */ +static uint16_t FLASH_OB_GetWRP(void) +{ + /* Return the FLASH write protection Register value */ + return (*(__IO uint16_t *)(OPTCR_BYTE2_ADDRESS)); +} + +/** + * @brief Returns the FLASH Read Protection level. + * @retval FLASH ReadOut Protection Status: + * This parameter can be one of the following values: + * @arg OB_RDP_LEVEL_0: No protection + * @arg OB_RDP_LEVEL_1: Read protection of the memory + * @arg OB_RDP_LEVEL_2: Full chip protection + */ +static uint8_t FLASH_OB_GetRDP(void) +{ + uint8_t readstatus = OB_RDP_LEVEL_0; + + if (*(__IO uint8_t *)(OPTCR_BYTE1_ADDRESS) == (uint8_t)OB_RDP_LEVEL_2) + { + readstatus = OB_RDP_LEVEL_2; + } + else if (*(__IO uint8_t *)(OPTCR_BYTE1_ADDRESS) == (uint8_t)OB_RDP_LEVEL_0) + { + readstatus = OB_RDP_LEVEL_0; + } + else + { + readstatus = OB_RDP_LEVEL_1; + } + + return readstatus; +} + +/** + * @brief Returns the FLASH BOR level. + * @retval uint8_t The FLASH BOR level: + * - OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V + * - OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V + * - OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V + * - OB_BOR_OFF : Supply voltage ranges from 1.62 to 2.1 V + */ +static uint8_t FLASH_OB_GetBOR(void) +{ + /* Return the FLASH BOR level */ + return (uint8_t)(*(__IO uint8_t *)(OPTCR_BYTE0_ADDRESS) & (uint8_t)0x0C); +} + +/** + * @brief Flush the instruction and data caches + * @retval None + */ +void FLASH_FlushCaches(void) +{ + /* Flush instruction cache */ + if (READ_BIT(FLASH->ACR, FLASH_ACR_ICEN) != RESET) + { + /* Disable instruction cache */ + __HAL_FLASH_INSTRUCTION_CACHE_DISABLE(); + /* Reset instruction cache */ + __HAL_FLASH_INSTRUCTION_CACHE_RESET(); + /* Enable instruction cache */ + __HAL_FLASH_INSTRUCTION_CACHE_ENABLE(); + } + + /* Flush data cache */ + if (READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != RESET) + { + /* Disable data cache */ + __HAL_FLASH_DATA_CACHE_DISABLE(); + /* Reset data cache */ + __HAL_FLASH_DATA_CACHE_RESET(); + /* Enable data cache */ + __HAL_FLASH_DATA_CACHE_ENABLE(); + } +} + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/stm32f4xx_hal_flash_ex.h b/libs/hal/stm32f4xx_hal_flash_ex.h similarity index 98% rename from Drivers/stm32f4xx_hal_flash_ex.h rename to libs/hal/stm32f4xx_hal_flash_ex.h index 908fd5e..1cf8c45 100644 --- a/Drivers/stm32f4xx_hal_flash_ex.h +++ b/libs/hal/stm32f4xx_hal_flash_ex.h @@ -1,1063 +1,1063 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_flash_ex.h - * @author MCD Application Team - * @brief Header file of FLASH HAL Extension module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_FLASH_EX_H -#define __STM32F4xx_HAL_FLASH_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup FLASHEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup FLASHEx_Exported_Types FLASH Exported Types - * @{ - */ - -/** - * @brief FLASH Erase structure definition - */ -typedef struct -{ - uint32_t TypeErase; /*!< Mass erase or sector Erase. - This parameter can be a value of @ref FLASHEx_Type_Erase */ - - uint32_t Banks; /*!< Select banks to erase when Mass erase is enabled. - This parameter must be a value of @ref FLASHEx_Banks */ - - uint32_t Sector; /*!< Initial FLASH sector to erase when Mass erase is disabled - This parameter must be a value of @ref FLASHEx_Sectors */ - - uint32_t NbSectors; /*!< Number of sectors to be erased. - This parameter must be a value between 1 and (max number of sectors - value of Initial sector)*/ - - uint32_t VoltageRange;/*!< The device voltage range which defines the erase parallelism - This parameter must be a value of @ref FLASHEx_Voltage_Range */ - -} FLASH_EraseInitTypeDef; - -/** - * @brief FLASH Option Bytes Program structure definition - */ -typedef struct -{ - uint32_t OptionType; /*!< Option byte to be configured. - This parameter can be a value of @ref FLASHEx_Option_Type */ - - uint32_t WRPState; /*!< Write protection activation or deactivation. - This parameter can be a value of @ref FLASHEx_WRP_State */ - - uint32_t WRPSector; /*!< Specifies the sector(s) to be write protected. - The value of this parameter depend on device used within the same series */ - - uint32_t Banks; /*!< Select banks for WRP activation/deactivation of all sectors. - This parameter must be a value of @ref FLASHEx_Banks */ - - uint32_t RDPLevel; /*!< Set the read protection level. - This parameter can be a value of @ref FLASHEx_Option_Bytes_Read_Protection */ - - uint32_t BORLevel; /*!< Set the BOR Level. - This parameter can be a value of @ref FLASHEx_BOR_Reset_Level */ - - uint8_t USERConfig; /*!< Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. */ - -} FLASH_OBProgramInitTypeDef; - -/** - * @brief FLASH Advanced Option Bytes Program structure definition - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ - defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ - defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -typedef struct -{ - uint32_t OptionType; /*!< Option byte to be configured for extension. - This parameter can be a value of @ref FLASHEx_Advanced_Option_Type */ - - uint32_t PCROPState; /*!< PCROP activation or deactivation. - This parameter can be a value of @ref FLASHEx_PCROP_State */ - -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - uint16_t Sectors; /*!< specifies the sector(s) set for PCROP. - This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */ -#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx ||\ - STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) - uint32_t Banks; /*!< Select banks for PCROP activation/deactivation of all sectors. - This parameter must be a value of @ref FLASHEx_Banks */ - - uint16_t SectorsBank1; /*!< Specifies the sector(s) set for PCROP for Bank1. - This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */ - - uint16_t SectorsBank2; /*!< Specifies the sector(s) set for PCROP for Bank2. - This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */ - - uint8_t BootConfig; /*!< Specifies Option bytes for boot config. - This parameter can be a value of @ref FLASHEx_Dual_Boot */ - -#endif /*STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ -}FLASH_AdvOBProgramInitTypeDef; -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || - STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup FLASHEx_Exported_Constants FLASH Exported Constants - * @{ - */ - -/** @defgroup FLASHEx_Type_Erase FLASH Type Erase - * @{ - */ -#define FLASH_TYPEERASE_SECTORS 0x00000000U /*!< Sectors erase only */ -#define FLASH_TYPEERASE_MASSERASE 0x00000001U /*!< Flash Mass erase activation */ -/** - * @} - */ - -/** @defgroup FLASHEx_Voltage_Range FLASH Voltage Range - * @{ - */ -#define FLASH_VOLTAGE_RANGE_1 0x00000000U /*!< Device operating range: 1.8V to 2.1V */ -#define FLASH_VOLTAGE_RANGE_2 0x00000001U /*!< Device operating range: 2.1V to 2.7V */ -#define FLASH_VOLTAGE_RANGE_3 0x00000002U /*!< Device operating range: 2.7V to 3.6V */ -#define FLASH_VOLTAGE_RANGE_4 0x00000003U /*!< Device operating range: 2.7V to 3.6V + External Vpp */ -/** - * @} - */ - -/** @defgroup FLASHEx_WRP_State FLASH WRP State - * @{ - */ -#define OB_WRPSTATE_DISABLE 0x00000000U /*!< Disable the write protection of the desired bank 1 sectors */ -#define OB_WRPSTATE_ENABLE 0x00000001U /*!< Enable the write protection of the desired bank 1 sectors */ -/** - * @} - */ - -/** @defgroup FLASHEx_Option_Type FLASH Option Type - * @{ - */ -#define OPTIONBYTE_WRP 0x00000001U /*!< WRP option byte configuration */ -#define OPTIONBYTE_RDP 0x00000002U /*!< RDP option byte configuration */ -#define OPTIONBYTE_USER 0x00000004U /*!< USER option byte configuration */ -#define OPTIONBYTE_BOR 0x00000008U /*!< BOR option byte configuration */ -/** - * @} - */ - -/** @defgroup FLASHEx_Option_Bytes_Read_Protection FLASH Option Bytes Read Protection - * @{ - */ -#define OB_RDP_LEVEL_0 ((uint8_t)0xAA) -#define OB_RDP_LEVEL_1 ((uint8_t)0x55) -#define OB_RDP_LEVEL_2 ((uint8_t)0xCC) /*!< Warning: When enabling read protection level 2 - it s no more possible to go back to level 1 or 0 */ -/** - * @} - */ - -/** @defgroup FLASHEx_Option_Bytes_IWatchdog FLASH Option Bytes IWatchdog - * @{ - */ -#define OB_IWDG_SW ((uint8_t)0x20) /*!< Software IWDG selected */ -#define OB_IWDG_HW ((uint8_t)0x00) /*!< Hardware IWDG selected */ -/** - * @} - */ - -/** @defgroup FLASHEx_Option_Bytes_nRST_STOP FLASH Option Bytes nRST_STOP - * @{ - */ -#define OB_STOP_NO_RST ((uint8_t)0x40) /*!< No reset generated when entering in STOP */ -#define OB_STOP_RST ((uint8_t)0x00) /*!< Reset generated when entering in STOP */ -/** - * @} - */ - - -/** @defgroup FLASHEx_Option_Bytes_nRST_STDBY FLASH Option Bytes nRST_STDBY - * @{ - */ -#define OB_STDBY_NO_RST ((uint8_t)0x80) /*!< No reset generated when entering in STANDBY */ -#define OB_STDBY_RST ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY */ -/** - * @} - */ - -/** @defgroup FLASHEx_BOR_Reset_Level FLASH BOR Reset Level - * @{ - */ -#define OB_BOR_LEVEL3 ((uint8_t)0x00) /*!< Supply voltage ranges from 2.70 to 3.60 V */ -#define OB_BOR_LEVEL2 ((uint8_t)0x04) /*!< Supply voltage ranges from 2.40 to 2.70 V */ -#define OB_BOR_LEVEL1 ((uint8_t)0x08) /*!< Supply voltage ranges from 2.10 to 2.40 V */ -#define OB_BOR_OFF ((uint8_t)0x0C) /*!< Supply voltage ranges from 1.62 to 2.10 V */ -/** - * @} - */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ - defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ - defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @defgroup FLASHEx_PCROP_State FLASH PCROP State - * @{ - */ -#define OB_PCROP_STATE_DISABLE 0x00000000U /*!< Disable PCROP */ -#define OB_PCROP_STATE_ENABLE 0x00000001U /*!< Enable PCROP */ -/** - * @} - */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE ||\ - STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\ - STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -/** @defgroup FLASHEx_Advanced_Option_Type FLASH Advanced Option Type - * @{ - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) -#define OPTIONBYTE_PCROP 0x00000001U /*!< PCROP option byte configuration */ -#define OPTIONBYTE_BOOTCONFIG 0x00000002U /*!< BOOTConfig option byte configuration */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ - defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\ - defined(STM32F423xx) -#define OPTIONBYTE_PCROP 0x00000001U /*!= FLASH_BASE) && ((ADDRESS) <= FLASH_END)) || \ - (((ADDRESS) >= FLASH_OTP_BASE) && ((ADDRESS) <= FLASH_OTP_END))) - -#define IS_FLASH_NBSECTORS(NBSECTORS) (((NBSECTORS) != 0) && ((NBSECTORS) <= FLASH_SECTOR_TOTAL)) - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFF000000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F413xx) || defined(STM32F423xx) -#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFFFF8000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F413xx || STM32F423xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) -#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -#if defined(STM32F401xC) -#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F401xC */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\ - defined(STM32F412Rx) || defined(STM32F412Cx) -#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F401xE || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define IS_OB_PCROP(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F413xx) || defined(STM32F423xx) -#define IS_OB_PCROP(SECTOR)((((SECTOR) & 0xFFFF8000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F413xx || STM32F423xx */ - -#if defined(STM32F401xC) -#define IS_OB_PCROP(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F401xC */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define IS_OB_PCROP(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\ - defined(STM32F412Rx) || defined(STM32F412Cx) -#define IS_OB_PCROP(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) -#endif /* STM32F401xE || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) -#define IS_OB_BOOT(BOOT) (((BOOT) == OB_DUAL_BOOT_ENABLE) || ((BOOT) == OB_DUAL_BOOT_DISABLE)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ - defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ - defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -#define IS_OB_PCROP_SELECT(PCROP) (((PCROP) == OB_PCROP_SELECTED) || ((PCROP) == OB_PCROP_DESELECTED)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE ||\ - STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\ - STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup FLASHEx_Private_Functions FLASH Private Functions - * @{ - */ -void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange); -void FLASH_FlushCaches(void); -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_FLASH_EX_H */ - +/** + ****************************************************************************** + * @file stm32f4xx_hal_flash_ex.h + * @author MCD Application Team + * @brief Header file of FLASH HAL Extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_FLASH_EX_H +#define __STM32F4xx_HAL_FLASH_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASHEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Types FLASH Exported Types + * @{ + */ + +/** + * @brief FLASH Erase structure definition + */ +typedef struct +{ + uint32_t TypeErase; /*!< Mass erase or sector Erase. + This parameter can be a value of @ref FLASHEx_Type_Erase */ + + uint32_t Banks; /*!< Select banks to erase when Mass erase is enabled. + This parameter must be a value of @ref FLASHEx_Banks */ + + uint32_t Sector; /*!< Initial FLASH sector to erase when Mass erase is disabled + This parameter must be a value of @ref FLASHEx_Sectors */ + + uint32_t NbSectors; /*!< Number of sectors to be erased. + This parameter must be a value between 1 and (max number of sectors - value of Initial sector)*/ + + uint32_t VoltageRange;/*!< The device voltage range which defines the erase parallelism + This parameter must be a value of @ref FLASHEx_Voltage_Range */ + +} FLASH_EraseInitTypeDef; + +/** + * @brief FLASH Option Bytes Program structure definition + */ +typedef struct +{ + uint32_t OptionType; /*!< Option byte to be configured. + This parameter can be a value of @ref FLASHEx_Option_Type */ + + uint32_t WRPState; /*!< Write protection activation or deactivation. + This parameter can be a value of @ref FLASHEx_WRP_State */ + + uint32_t WRPSector; /*!< Specifies the sector(s) to be write protected. + The value of this parameter depend on device used within the same series */ + + uint32_t Banks; /*!< Select banks for WRP activation/deactivation of all sectors. + This parameter must be a value of @ref FLASHEx_Banks */ + + uint32_t RDPLevel; /*!< Set the read protection level. + This parameter can be a value of @ref FLASHEx_Option_Bytes_Read_Protection */ + + uint32_t BORLevel; /*!< Set the BOR Level. + This parameter can be a value of @ref FLASHEx_BOR_Reset_Level */ + + uint8_t USERConfig; /*!< Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. */ + +} FLASH_OBProgramInitTypeDef; + +/** + * @brief FLASH Advanced Option Bytes Program structure definition + */ +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ + defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ + defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ + defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ + defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +typedef struct +{ + uint32_t OptionType; /*!< Option byte to be configured for extension. + This parameter can be a value of @ref FLASHEx_Advanced_Option_Type */ + + uint32_t PCROPState; /*!< PCROP activation or deactivation. + This parameter can be a value of @ref FLASHEx_PCROP_State */ + +#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\ + defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) + uint16_t Sectors; /*!< specifies the sector(s) set for PCROP. + This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */ +#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx ||\ + STM32F412Cx || STM32F413xx || STM32F423xx */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) + uint32_t Banks; /*!< Select banks for PCROP activation/deactivation of all sectors. + This parameter must be a value of @ref FLASHEx_Banks */ + + uint16_t SectorsBank1; /*!< Specifies the sector(s) set for PCROP for Bank1. + This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */ + + uint16_t SectorsBank2; /*!< Specifies the sector(s) set for PCROP for Bank2. + This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */ + + uint8_t BootConfig; /*!< Specifies Option bytes for boot config. + This parameter can be a value of @ref FLASHEx_Dual_Boot */ + +#endif /*STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ +}FLASH_AdvOBProgramInitTypeDef; +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F446xx || + STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup FLASHEx_Exported_Constants FLASH Exported Constants + * @{ + */ + +/** @defgroup FLASHEx_Type_Erase FLASH Type Erase + * @{ + */ +#define FLASH_TYPEERASE_SECTORS 0x00000000U /*!< Sectors erase only */ +#define FLASH_TYPEERASE_MASSERASE 0x00000001U /*!< Flash Mass erase activation */ +/** + * @} + */ + +/** @defgroup FLASHEx_Voltage_Range FLASH Voltage Range + * @{ + */ +#define FLASH_VOLTAGE_RANGE_1 0x00000000U /*!< Device operating range: 1.8V to 2.1V */ +#define FLASH_VOLTAGE_RANGE_2 0x00000001U /*!< Device operating range: 2.1V to 2.7V */ +#define FLASH_VOLTAGE_RANGE_3 0x00000002U /*!< Device operating range: 2.7V to 3.6V */ +#define FLASH_VOLTAGE_RANGE_4 0x00000003U /*!< Device operating range: 2.7V to 3.6V + External Vpp */ +/** + * @} + */ + +/** @defgroup FLASHEx_WRP_State FLASH WRP State + * @{ + */ +#define OB_WRPSTATE_DISABLE 0x00000000U /*!< Disable the write protection of the desired bank 1 sectors */ +#define OB_WRPSTATE_ENABLE 0x00000001U /*!< Enable the write protection of the desired bank 1 sectors */ +/** + * @} + */ + +/** @defgroup FLASHEx_Option_Type FLASH Option Type + * @{ + */ +#define OPTIONBYTE_WRP 0x00000001U /*!< WRP option byte configuration */ +#define OPTIONBYTE_RDP 0x00000002U /*!< RDP option byte configuration */ +#define OPTIONBYTE_USER 0x00000004U /*!< USER option byte configuration */ +#define OPTIONBYTE_BOR 0x00000008U /*!< BOR option byte configuration */ +/** + * @} + */ + +/** @defgroup FLASHEx_Option_Bytes_Read_Protection FLASH Option Bytes Read Protection + * @{ + */ +#define OB_RDP_LEVEL_0 ((uint8_t)0xAA) +#define OB_RDP_LEVEL_1 ((uint8_t)0x55) +#define OB_RDP_LEVEL_2 ((uint8_t)0xCC) /*!< Warning: When enabling read protection level 2 + it s no more possible to go back to level 1 or 0 */ +/** + * @} + */ + +/** @defgroup FLASHEx_Option_Bytes_IWatchdog FLASH Option Bytes IWatchdog + * @{ + */ +#define OB_IWDG_SW ((uint8_t)0x20) /*!< Software IWDG selected */ +#define OB_IWDG_HW ((uint8_t)0x00) /*!< Hardware IWDG selected */ +/** + * @} + */ + +/** @defgroup FLASHEx_Option_Bytes_nRST_STOP FLASH Option Bytes nRST_STOP + * @{ + */ +#define OB_STOP_NO_RST ((uint8_t)0x40) /*!< No reset generated when entering in STOP */ +#define OB_STOP_RST ((uint8_t)0x00) /*!< Reset generated when entering in STOP */ +/** + * @} + */ + + +/** @defgroup FLASHEx_Option_Bytes_nRST_STDBY FLASH Option Bytes nRST_STDBY + * @{ + */ +#define OB_STDBY_NO_RST ((uint8_t)0x80) /*!< No reset generated when entering in STANDBY */ +#define OB_STDBY_RST ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY */ +/** + * @} + */ + +/** @defgroup FLASHEx_BOR_Reset_Level FLASH BOR Reset Level + * @{ + */ +#define OB_BOR_LEVEL3 ((uint8_t)0x00) /*!< Supply voltage ranges from 2.70 to 3.60 V */ +#define OB_BOR_LEVEL2 ((uint8_t)0x04) /*!< Supply voltage ranges from 2.40 to 2.70 V */ +#define OB_BOR_LEVEL1 ((uint8_t)0x08) /*!< Supply voltage ranges from 2.10 to 2.40 V */ +#define OB_BOR_OFF ((uint8_t)0x0C) /*!< Supply voltage ranges from 1.62 to 2.10 V */ +/** + * @} + */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ + defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ + defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ + defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ + defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +/** @defgroup FLASHEx_PCROP_State FLASH PCROP State + * @{ + */ +#define OB_PCROP_STATE_DISABLE 0x00000000U /*!< Disable PCROP */ +#define OB_PCROP_STATE_ENABLE 0x00000001U /*!< Enable PCROP */ +/** + * @} + */ +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE ||\ + STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\ + STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ + +/** @defgroup FLASHEx_Advanced_Option_Type FLASH Advanced Option Type + * @{ + */ +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ + defined(STM32F469xx) || defined(STM32F479xx) +#define OPTIONBYTE_PCROP 0x00000001U /*!< PCROP option byte configuration */ +#define OPTIONBYTE_BOOTCONFIG 0x00000002U /*!< BOOTConfig option byte configuration */ +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ + +#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ + defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\ + defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\ + defined(STM32F423xx) +#define OPTIONBYTE_PCROP 0x00000001U /*!= FLASH_BASE) && ((ADDRESS) <= FLASH_END)) || \ + (((ADDRESS) >= FLASH_OTP_BASE) && ((ADDRESS) <= FLASH_OTP_END))) + +#define IS_FLASH_NBSECTORS(NBSECTORS) (((NBSECTORS) != 0) && ((NBSECTORS) <= FLASH_SECTOR_TOTAL)) + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) +#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFF000000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ + +#if defined(STM32F413xx) || defined(STM32F423xx) +#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFFFF8000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) +#endif /* STM32F413xx || STM32F423xx */ + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) +#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ + +#if defined(STM32F401xC) +#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) +#endif /* STM32F401xC */ + +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) +#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) +#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ + +#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\ + defined(STM32F412Rx) || defined(STM32F412Cx) +#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) +#endif /* STM32F401xE || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) +#define IS_OB_PCROP(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ + +#if defined(STM32F413xx) || defined(STM32F423xx) +#define IS_OB_PCROP(SECTOR)((((SECTOR) & 0xFFFF8000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) +#endif /* STM32F413xx || STM32F423xx */ + +#if defined(STM32F401xC) +#define IS_OB_PCROP(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) +#endif /* STM32F401xC */ + +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) +#define IS_OB_PCROP(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) +#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ + +#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\ + defined(STM32F412Rx) || defined(STM32F412Cx) +#define IS_OB_PCROP(SECTOR)((((SECTOR) & 0xFFFFF000U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) +#endif /* STM32F401xE || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ + defined(STM32F469xx) || defined(STM32F479xx) +#define IS_OB_BOOT(BOOT) (((BOOT) == OB_DUAL_BOOT_ENABLE) || ((BOOT) == OB_DUAL_BOOT_DISABLE)) +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ + defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ + defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ + defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ + defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +#define IS_OB_PCROP_SELECT(PCROP) (((PCROP) == OB_PCROP_SELECTED) || ((PCROP) == OB_PCROP_DESELECTED)) +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE ||\ + STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\ + STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup FLASHEx_Private_Functions FLASH Private Functions + * @{ + */ +void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange); +void FLASH_FlushCaches(void); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_FLASH_EX_H */ + diff --git a/Drivers/stm32f4xx_hal_flash_ramfunc.c b/libs/hal/stm32f4xx_hal_flash_ramfunc.c similarity index 97% rename from Drivers/stm32f4xx_hal_flash_ramfunc.c rename to libs/hal/stm32f4xx_hal_flash_ramfunc.c index fdc5a4c..952595b 100644 --- a/Drivers/stm32f4xx_hal_flash_ramfunc.c +++ b/libs/hal/stm32f4xx_hal_flash_ramfunc.c @@ -1,172 +1,172 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_flash_ramfunc.c - * @author MCD Application Team - * @brief FLASH RAMFUNC module driver. - * This file provides a FLASH firmware functions which should be - * executed from internal SRAM - * + Stop/Start the flash interface while System Run - * + Enable/Disable the flash sleep while System Run - @verbatim - ============================================================================== - ##### APIs executed from Internal RAM ##### - ============================================================================== - [..] - *** ARM Compiler *** - -------------------- - [..] RAM functions are defined using the toolchain options. - Functions that are be executed in RAM should reside in a separate - source module. Using the 'Options for File' dialog you can simply change - the 'Code / Const' area of a module to a memory space in physical RAM. - Available memory areas are declared in the 'Target' tab of the - Options for Target' dialog. - - *** ICCARM Compiler *** - ----------------------- - [..] RAM functions are defined using a specific toolchain keyword "__ramfunc". - - *** GNU Compiler *** - -------------------- - [..] RAM functions are defined using a specific toolchain attribute - "__attribute__((section(".RamFunc")))". - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup FLASH_RAMFUNC FLASH RAMFUNC - * @brief FLASH functions executed from RAM - * @{ - */ -#ifdef HAL_FLASH_MODULE_ENABLED -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F412Cx) - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @defgroup FLASH_RAMFUNC_Exported_Functions FLASH RAMFUNC Exported Functions - * @{ - */ - -/** @defgroup FLASH_RAMFUNC_Exported_Functions_Group1 Peripheral features functions executed from internal RAM - * @brief Peripheral Extended features functions - * -@verbatim - - =============================================================================== - ##### ramfunc functions ##### - =============================================================================== - [..] - This subsection provides a set of functions that should be executed from RAM - transfers. - -@endverbatim - * @{ - */ - -/** - * @brief Stop the flash interface while System Run - * @note This mode is only available for STM32F41xxx/STM32F446xx devices. - * @note This mode couldn't be set while executing with the flash itself. - * It should be done with specific routine executed from RAM. - * @retval HAL status - */ -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StopFlashInterfaceClk(void) -{ - /* Enable Power ctrl clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - /* Stop the flash interface while System Run */ - SET_BIT(PWR->CR, PWR_CR_FISSR); - - return HAL_OK; -} - -/** - * @brief Start the flash interface while System Run - * @note This mode is only available for STM32F411xx/STM32F446xx devices. - * @note This mode couldn't be set while executing with the flash itself. - * It should be done with specific routine executed from RAM. - * @retval HAL status - */ -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StartFlashInterfaceClk(void) -{ - /* Enable Power ctrl clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - /* Start the flash interface while System Run */ - CLEAR_BIT(PWR->CR, PWR_CR_FISSR); - - return HAL_OK; -} - -/** - * @brief Enable the flash sleep while System Run - * @note This mode is only available for STM32F41xxx/STM32F446xx devices. - * @note This mode could n't be set while executing with the flash itself. - * It should be done with specific routine executed from RAM. - * @retval HAL status - */ -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EnableFlashSleepMode(void) -{ - /* Enable Power ctrl clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - /* Enable the flash sleep while System Run */ - SET_BIT(PWR->CR, PWR_CR_FMSSR); - - return HAL_OK; -} - -/** - * @brief Disable the flash sleep while System Run - * @note This mode is only available for STM32F41xxx/STM32F446xx devices. - * @note This mode couldn't be set while executing with the flash itself. - * It should be done with specific routine executed from RAM. - * @retval HAL status - */ -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_DisableFlashSleepMode(void) -{ - /* Enable Power ctrl clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - /* Disable the flash sleep while System Run */ - CLEAR_BIT(PWR->CR, PWR_CR_FMSSR); - - return HAL_OK; -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ -#endif /* HAL_FLASH_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - +/** + ****************************************************************************** + * @file stm32f4xx_hal_flash_ramfunc.c + * @author MCD Application Team + * @brief FLASH RAMFUNC module driver. + * This file provides a FLASH firmware functions which should be + * executed from internal SRAM + * + Stop/Start the flash interface while System Run + * + Enable/Disable the flash sleep while System Run + @verbatim + ============================================================================== + ##### APIs executed from Internal RAM ##### + ============================================================================== + [..] + *** ARM Compiler *** + -------------------- + [..] RAM functions are defined using the toolchain options. + Functions that are be executed in RAM should reside in a separate + source module. Using the 'Options for File' dialog you can simply change + the 'Code / Const' area of a module to a memory space in physical RAM. + Available memory areas are declared in the 'Target' tab of the + Options for Target' dialog. + + *** ICCARM Compiler *** + ----------------------- + [..] RAM functions are defined using a specific toolchain keyword "__ramfunc". + + *** GNU Compiler *** + -------------------- + [..] RAM functions are defined using a specific toolchain attribute + "__attribute__((section(".RamFunc")))". + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup FLASH_RAMFUNC FLASH RAMFUNC + * @brief FLASH functions executed from RAM + * @{ + */ +#ifdef HAL_FLASH_MODULE_ENABLED +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ + defined(STM32F412Rx) || defined(STM32F412Cx) + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup FLASH_RAMFUNC_Exported_Functions FLASH RAMFUNC Exported Functions + * @{ + */ + +/** @defgroup FLASH_RAMFUNC_Exported_Functions_Group1 Peripheral features functions executed from internal RAM + * @brief Peripheral Extended features functions + * +@verbatim + + =============================================================================== + ##### ramfunc functions ##### + =============================================================================== + [..] + This subsection provides a set of functions that should be executed from RAM + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Stop the flash interface while System Run + * @note This mode is only available for STM32F41xxx/STM32F446xx devices. + * @note This mode couldn't be set while executing with the flash itself. + * It should be done with specific routine executed from RAM. + * @retval HAL status + */ +__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StopFlashInterfaceClk(void) +{ + /* Enable Power ctrl clock */ + __HAL_RCC_PWR_CLK_ENABLE(); + /* Stop the flash interface while System Run */ + SET_BIT(PWR->CR, PWR_CR_FISSR); + + return HAL_OK; +} + +/** + * @brief Start the flash interface while System Run + * @note This mode is only available for STM32F411xx/STM32F446xx devices. + * @note This mode couldn't be set while executing with the flash itself. + * It should be done with specific routine executed from RAM. + * @retval HAL status + */ +__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StartFlashInterfaceClk(void) +{ + /* Enable Power ctrl clock */ + __HAL_RCC_PWR_CLK_ENABLE(); + /* Start the flash interface while System Run */ + CLEAR_BIT(PWR->CR, PWR_CR_FISSR); + + return HAL_OK; +} + +/** + * @brief Enable the flash sleep while System Run + * @note This mode is only available for STM32F41xxx/STM32F446xx devices. + * @note This mode could n't be set while executing with the flash itself. + * It should be done with specific routine executed from RAM. + * @retval HAL status + */ +__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EnableFlashSleepMode(void) +{ + /* Enable Power ctrl clock */ + __HAL_RCC_PWR_CLK_ENABLE(); + /* Enable the flash sleep while System Run */ + SET_BIT(PWR->CR, PWR_CR_FMSSR); + + return HAL_OK; +} + +/** + * @brief Disable the flash sleep while System Run + * @note This mode is only available for STM32F41xxx/STM32F446xx devices. + * @note This mode couldn't be set while executing with the flash itself. + * It should be done with specific routine executed from RAM. + * @retval HAL status + */ +__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_DisableFlashSleepMode(void) +{ + /* Enable Power ctrl clock */ + __HAL_RCC_PWR_CLK_ENABLE(); + /* Disable the flash sleep while System Run */ + CLEAR_BIT(PWR->CR, PWR_CR_FMSSR); + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ +#endif /* HAL_FLASH_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/stm32f4xx_hal_flash_ramfunc.h b/libs/hal/stm32f4xx_hal_flash_ramfunc.h similarity index 96% rename from Drivers/stm32f4xx_hal_flash_ramfunc.h rename to libs/hal/stm32f4xx_hal_flash_ramfunc.h index b4d5f60..05917ec 100644 --- a/Drivers/stm32f4xx_hal_flash_ramfunc.h +++ b/libs/hal/stm32f4xx_hal_flash_ramfunc.h @@ -1,76 +1,76 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_flash_ramfunc.h - * @author MCD Application Team - * @brief Header file of FLASH RAMFUNC driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_FLASH_RAMFUNC_H -#define __STM32F4xx_FLASH_RAMFUNC_H - -#ifdef __cplusplus - extern "C" { -#endif -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup FLASH_RAMFUNC - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup FLASH_RAMFUNC_Exported_Functions - * @{ - */ - -/** @addtogroup FLASH_RAMFUNC_Exported_Functions_Group1 - * @{ - */ -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StopFlashInterfaceClk(void); -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StartFlashInterfaceClk(void); -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EnableFlashSleepMode(void); -__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_DisableFlashSleepMode(void); -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F4xx_FLASH_RAMFUNC_H */ - +/** + ****************************************************************************** + * @file stm32f4xx_hal_flash_ramfunc.h + * @author MCD Application Team + * @brief Header file of FLASH RAMFUNC driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_FLASH_RAMFUNC_H +#define __STM32F4xx_FLASH_RAMFUNC_H + +#ifdef __cplusplus + extern "C" { +#endif +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\ + defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASH_RAMFUNC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASH_RAMFUNC_Exported_Functions + * @{ + */ + +/** @addtogroup FLASH_RAMFUNC_Exported_Functions_Group1 + * @{ + */ +__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StopFlashInterfaceClk(void); +__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StartFlashInterfaceClk(void); +__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EnableFlashSleepMode(void); +__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_DisableFlashSleepMode(void); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32F4xx_FLASH_RAMFUNC_H */ + diff --git a/Drivers/stm32f4xx_hal_gpio.c b/libs/hal/stm32f4xx_hal_gpio.c similarity index 97% rename from Drivers/stm32f4xx_hal_gpio.c rename to libs/hal/stm32f4xx_hal_gpio.c index 184fe58..b3ce9bb 100644 --- a/Drivers/stm32f4xx_hal_gpio.c +++ b/libs/hal/stm32f4xx_hal_gpio.c @@ -1,533 +1,533 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_gpio.c - * @author MCD Application Team - * @brief GPIO HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the General Purpose Input/Output (GPIO) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### GPIO Peripheral features ##### - ============================================================================== - [..] - Subject to the specific hardware characteristics of each I/O port listed in the datasheet, each - port bit of the General Purpose IO (GPIO) Ports, can be individually configured by software - in several modes: - (+) Input mode - (+) Analog mode - (+) Output mode - (+) Alternate function mode - (+) External interrupt/event lines - - [..] - During and just after reset, the alternate functions and external interrupt - lines are not active and the I/O ports are configured in input floating mode. - - [..] - All GPIO pins have weak internal pull-up and pull-down resistors, which can be - activated or not. - - [..] - In Output or Alternate mode, each IO can be configured on open-drain or push-pull - type and the IO speed can be selected depending on the VDD value. - - [..] - All ports have external interrupt/event capability. To use external interrupt - lines, the port must be configured in input mode. All available GPIO pins are - connected to the 16 external interrupt/event lines from EXTI0 to EXTI15. - - [..] - The external interrupt/event controller consists of up to 23 edge detectors - (16 lines are connected to GPIO) for generating event/interrupt requests (each - input line can be independently configured to select the type (interrupt or event) - and the corresponding trigger event (rising or falling or both). Each line can - also be masked independently. - - ##### How to use this driver ##### - ============================================================================== - [..] - (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE(). - - (#) Configure the GPIO pin(s) using HAL_GPIO_Init(). - (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure - (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef - structure. - (++) In case of Output or alternate function mode selection: the speed is - configured through "Speed" member from GPIO_InitTypeDef structure. - (++) In alternate mode is selection, the alternate function connected to the IO - is configured through "Alternate" member from GPIO_InitTypeDef structure. - (++) Analog mode is required when a pin is to be used as ADC channel - or DAC output. - (++) In case of external interrupt/event selection the "Mode" member from - GPIO_InitTypeDef structure select the type (interrupt or event) and - the corresponding trigger event (rising or falling or both). - - (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority - mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using - HAL_NVIC_EnableIRQ(). - - (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin(). - - (#) To set/reset the level of a pin configured in output mode use - HAL_GPIO_WritePin()/HAL_GPIO_TogglePin(). - - (#) To lock pin configuration until next reset use HAL_GPIO_LockPin(). - - - (#) During and just after reset, the alternate functions are not - active and the GPIO pins are configured in input floating mode (except JTAG - pins). - - (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose - (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has - priority over the GPIO function. - - (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as - general purpose PH0 and PH1, respectively, when the HSE oscillator is off. - The HSE has priority over the GPIO function. - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup GPIO GPIO - * @brief GPIO HAL module driver - * @{ - */ - -#ifdef HAL_GPIO_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup GPIO_Private_Constants GPIO Private Constants - * @{ - */ - -#define GPIO_NUMBER 16U -/** - * @} - */ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @defgroup GPIO_Exported_Functions GPIO Exported Functions - * @{ - */ - -/** @defgroup GPIO_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] - This section provides functions allowing to initialize and de-initialize the GPIOs - to be ready for use. - -@endverbatim - * @{ - */ - - -/** - * @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init. - * @param GPIOx where x can be (A..K) to select the GPIO peripheral for STM32F429X device or - * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices. - * @param GPIO_Init pointer to a GPIO_InitTypeDef structure that contains - * the configuration information for the specified GPIO peripheral. - * @retval None - */ -void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) -{ - uint32_t position; - uint32_t ioposition = 0x00U; - uint32_t iocurrent = 0x00U; - uint32_t temp = 0x00U; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); - assert_param(IS_GPIO_PIN(GPIO_Init->Pin)); - assert_param(IS_GPIO_MODE(GPIO_Init->Mode)); - - /* Configure the port pins */ - for(position = 0U; position < GPIO_NUMBER; position++) - { - /* Get the IO position */ - ioposition = 0x01U << position; - /* Get the current IO position */ - iocurrent = (uint32_t)(GPIO_Init->Pin) & ioposition; - - if(iocurrent == ioposition) - { - /*--------------------- GPIO Mode Configuration ------------------------*/ - /* In case of Output or Alternate function mode selection */ - if(((GPIO_Init->Mode & GPIO_MODE) == MODE_OUTPUT) || \ - (GPIO_Init->Mode & GPIO_MODE) == MODE_AF) - { - /* Check the Speed parameter */ - assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); - /* Configure the IO Speed */ - temp = GPIOx->OSPEEDR; - temp &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2U)); - temp |= (GPIO_Init->Speed << (position * 2U)); - GPIOx->OSPEEDR = temp; - - /* Configure the IO Output Type */ - temp = GPIOx->OTYPER; - temp &= ~(GPIO_OTYPER_OT_0 << position) ; - temp |= (((GPIO_Init->Mode & OUTPUT_TYPE) >> OUTPUT_TYPE_Pos) << position); - GPIOx->OTYPER = temp; - } - - if((GPIO_Init->Mode & GPIO_MODE) != MODE_ANALOG) - { - /* Check the parameters */ - assert_param(IS_GPIO_PULL(GPIO_Init->Pull)); - - /* Activate the Pull-up or Pull down resistor for the current IO */ - temp = GPIOx->PUPDR; - temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2U)); - temp |= ((GPIO_Init->Pull) << (position * 2U)); - GPIOx->PUPDR = temp; - } - - /* In case of Alternate function mode selection */ - if((GPIO_Init->Mode & GPIO_MODE) == MODE_AF) - { - /* Check the Alternate function parameter */ - assert_param(IS_GPIO_AF(GPIO_Init->Alternate)); - /* Configure Alternate function mapped with the current IO */ - temp = GPIOx->AFR[position >> 3U]; - temp &= ~(0xFU << ((uint32_t)(position & 0x07U) * 4U)) ; - temp |= ((uint32_t)(GPIO_Init->Alternate) << (((uint32_t)position & 0x07U) * 4U)); - GPIOx->AFR[position >> 3U] = temp; - } - - /* Configure IO Direction mode (Input, Output, Alternate or Analog) */ - temp = GPIOx->MODER; - temp &= ~(GPIO_MODER_MODER0 << (position * 2U)); - temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2U)); - GPIOx->MODER = temp; - - /*--------------------- EXTI Mode Configuration ------------------------*/ - /* Configure the External Interrupt or event for the current IO */ - if((GPIO_Init->Mode & EXTI_MODE) != 0x00U) - { - /* Enable SYSCFG Clock */ - __HAL_RCC_SYSCFG_CLK_ENABLE(); - - temp = SYSCFG->EXTICR[position >> 2U]; - temp &= ~(0x0FU << (4U * (position & 0x03U))); - temp |= ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4U * (position & 0x03U))); - SYSCFG->EXTICR[position >> 2U] = temp; - - /* Clear Rising Falling edge configuration */ - temp = EXTI->RTSR; - temp &= ~((uint32_t)iocurrent); - if((GPIO_Init->Mode & TRIGGER_RISING) != 0x00U) - { - temp |= iocurrent; - } - EXTI->RTSR = temp; - - temp = EXTI->FTSR; - temp &= ~((uint32_t)iocurrent); - if((GPIO_Init->Mode & TRIGGER_FALLING) != 0x00U) - { - temp |= iocurrent; - } - EXTI->FTSR = temp; - - temp = EXTI->EMR; - temp &= ~((uint32_t)iocurrent); - if((GPIO_Init->Mode & EXTI_EVT) != 0x00U) - { - temp |= iocurrent; - } - EXTI->EMR = temp; - - /* Clear EXTI line configuration */ - temp = EXTI->IMR; - temp &= ~((uint32_t)iocurrent); - if((GPIO_Init->Mode & EXTI_IT) != 0x00U) - { - temp |= iocurrent; - } - EXTI->IMR = temp; - } - } - } -} - -/** - * @brief De-initializes the GPIOx peripheral registers to their default reset values. - * @param GPIOx where x can be (A..K) to select the GPIO peripheral for STM32F429X device or - * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices. - * @param GPIO_Pin specifies the port bit to be written. - * This parameter can be one of GPIO_PIN_x where x can be (0..15). - * @retval None - */ -void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) -{ - uint32_t position; - uint32_t ioposition = 0x00U; - uint32_t iocurrent = 0x00U; - uint32_t tmp = 0x00U; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); - - /* Configure the port pins */ - for(position = 0U; position < GPIO_NUMBER; position++) - { - /* Get the IO position */ - ioposition = 0x01U << position; - /* Get the current IO position */ - iocurrent = (GPIO_Pin) & ioposition; - - if(iocurrent == ioposition) - { - /*------------------------- EXTI Mode Configuration --------------------*/ - tmp = SYSCFG->EXTICR[position >> 2U]; - tmp &= (0x0FU << (4U * (position & 0x03U))); - if(tmp == ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4U * (position & 0x03U)))) - { - /* Clear EXTI line configuration */ - EXTI->IMR &= ~((uint32_t)iocurrent); - EXTI->EMR &= ~((uint32_t)iocurrent); - - /* Clear Rising Falling edge configuration */ - EXTI->FTSR &= ~((uint32_t)iocurrent); - EXTI->RTSR &= ~((uint32_t)iocurrent); - - /* Configure the External Interrupt or event for the current IO */ - tmp = 0x0FU << (4U * (position & 0x03U)); - SYSCFG->EXTICR[position >> 2U] &= ~tmp; - } - - /*------------------------- GPIO Mode Configuration --------------------*/ - /* Configure IO Direction in Input Floating Mode */ - GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (position * 2U)); - - /* Configure the default Alternate Function in current IO */ - GPIOx->AFR[position >> 3U] &= ~(0xFU << ((uint32_t)(position & 0x07U) * 4U)) ; - - /* Deactivate the Pull-up and Pull-down resistor for the current IO */ - GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << (position * 2U)); - - /* Configure the default value IO Output Type */ - GPIOx->OTYPER &= ~(GPIO_OTYPER_OT_0 << position) ; - - /* Configure the default value for IO Speed */ - GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2U)); - } - } -} - -/** - * @} - */ - -/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions - * @brief GPIO Read and Write - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Reads the specified input port pin. - * @param GPIOx where x can be (A..K) to select the GPIO peripheral for STM32F429X device or - * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices. - * @param GPIO_Pin specifies the port bit to read. - * This parameter can be GPIO_PIN_x where x can be (0..15). - * @retval The input port pin value. - */ -GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - GPIO_PinState bitstatus; - - /* Check the parameters */ - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - if((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET) - { - bitstatus = GPIO_PIN_SET; - } - else - { - bitstatus = GPIO_PIN_RESET; - } - return bitstatus; -} - -/** - * @brief Sets or clears the selected data port bit. - * - * @note This function uses GPIOx_BSRR register to allow atomic read/modify - * accesses. In this way, there is no risk of an IRQ occurring between - * the read and the modify access. - * - * @param GPIOx where x can be (A..K) to select the GPIO peripheral for STM32F429X device or - * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices. - * @param GPIO_Pin specifies the port bit to be written. - * This parameter can be one of GPIO_PIN_x where x can be (0..15). - * @param PinState specifies the value to be written to the selected bit. - * This parameter can be one of the GPIO_PinState enum values: - * @arg GPIO_PIN_RESET: to clear the port pin - * @arg GPIO_PIN_SET: to set the port pin - * @retval None - */ -void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState) -{ - /* Check the parameters */ - assert_param(IS_GPIO_PIN(GPIO_Pin)); - assert_param(IS_GPIO_PIN_ACTION(PinState)); - - if(PinState != GPIO_PIN_RESET) - { - GPIOx->BSRR = GPIO_Pin; - } - else - { - GPIOx->BSRR = (uint32_t)GPIO_Pin << 16U; - } -} - -/** - * @brief Toggles the specified GPIO pins. - * @param GPIOx Where x can be (A..K) to select the GPIO peripheral for STM32F429X device or - * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices. - * @param GPIO_Pin Specifies the pins to be toggled. - * @retval None - */ -void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - uint32_t odr; - - /* Check the parameters */ - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - /* get current Output Data Register value */ - odr = GPIOx->ODR; - - /* Set selected pins that were at low level, and reset ones that were high */ - GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin); -} - -/** - * @brief Locks GPIO Pins configuration registers. - * @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR, - * GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH. - * @note The configuration of the locked GPIO pins can no longer be modified - * until the next reset. - * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F4 family - * @param GPIO_Pin specifies the port bit to be locked. - * This parameter can be any combination of GPIO_PIN_x where x can be (0..15). - * @retval None - */ -HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - __IO uint32_t tmp = GPIO_LCKR_LCKK; - - /* Check the parameters */ - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - /* Apply lock key write sequence */ - tmp |= GPIO_Pin; - /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ - GPIOx->LCKR = tmp; - /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */ - GPIOx->LCKR = GPIO_Pin; - /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ - GPIOx->LCKR = tmp; - /* Read LCKR register. This read is mandatory to complete key lock sequence */ - tmp = GPIOx->LCKR; - - /* Read again in order to confirm lock is active */ - if((GPIOx->LCKR & GPIO_LCKR_LCKK) != RESET) - { - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief This function handles EXTI interrupt request. - * @param GPIO_Pin Specifies the pins connected EXTI line - * @retval None - */ -void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin) -{ - /* EXTI line interrupt detected */ - if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != RESET) - { - __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin); - HAL_GPIO_EXTI_Callback(GPIO_Pin); - } -} - -/** - * @brief EXTI line detection callbacks. - * @param GPIO_Pin Specifies the pins connected EXTI line - * @retval None - */ -__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(GPIO_Pin); - /* NOTE: This function Should not be modified, when the callback is needed, - the HAL_GPIO_EXTI_Callback could be implemented in the user file - */ -} - -/** - * @} - */ - - -/** - * @} - */ - -#endif /* HAL_GPIO_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - +/** + ****************************************************************************** + * @file stm32f4xx_hal_gpio.c + * @author MCD Application Team + * @brief GPIO HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the General Purpose Input/Output (GPIO) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### GPIO Peripheral features ##### + ============================================================================== + [..] + Subject to the specific hardware characteristics of each I/O port listed in the datasheet, each + port bit of the General Purpose IO (GPIO) Ports, can be individually configured by software + in several modes: + (+) Input mode + (+) Analog mode + (+) Output mode + (+) Alternate function mode + (+) External interrupt/event lines + + [..] + During and just after reset, the alternate functions and external interrupt + lines are not active and the I/O ports are configured in input floating mode. + + [..] + All GPIO pins have weak internal pull-up and pull-down resistors, which can be + activated or not. + + [..] + In Output or Alternate mode, each IO can be configured on open-drain or push-pull + type and the IO speed can be selected depending on the VDD value. + + [..] + All ports have external interrupt/event capability. To use external interrupt + lines, the port must be configured in input mode. All available GPIO pins are + connected to the 16 external interrupt/event lines from EXTI0 to EXTI15. + + [..] + The external interrupt/event controller consists of up to 23 edge detectors + (16 lines are connected to GPIO) for generating event/interrupt requests (each + input line can be independently configured to select the type (interrupt or event) + and the corresponding trigger event (rising or falling or both). Each line can + also be masked independently. + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE(). + + (#) Configure the GPIO pin(s) using HAL_GPIO_Init(). + (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure + (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef + structure. + (++) In case of Output or alternate function mode selection: the speed is + configured through "Speed" member from GPIO_InitTypeDef structure. + (++) In alternate mode is selection, the alternate function connected to the IO + is configured through "Alternate" member from GPIO_InitTypeDef structure. + (++) Analog mode is required when a pin is to be used as ADC channel + or DAC output. + (++) In case of external interrupt/event selection the "Mode" member from + GPIO_InitTypeDef structure select the type (interrupt or event) and + the corresponding trigger event (rising or falling or both). + + (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority + mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using + HAL_NVIC_EnableIRQ(). + + (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin(). + + (#) To set/reset the level of a pin configured in output mode use + HAL_GPIO_WritePin()/HAL_GPIO_TogglePin(). + + (#) To lock pin configuration until next reset use HAL_GPIO_LockPin(). + + + (#) During and just after reset, the alternate functions are not + active and the GPIO pins are configured in input floating mode (except JTAG + pins). + + (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose + (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has + priority over the GPIO function. + + (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as + general purpose PH0 and PH1, respectively, when the HSE oscillator is off. + The HSE has priority over the GPIO function. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIO GPIO + * @brief GPIO HAL module driver + * @{ + */ + +#ifdef HAL_GPIO_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup GPIO_Private_Constants GPIO Private Constants + * @{ + */ + +#define GPIO_NUMBER 16U +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Functions GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to initialize and de-initialize the GPIOs + to be ready for use. + +@endverbatim + * @{ + */ + + +/** + * @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init. + * @param GPIOx where x can be (A..K) to select the GPIO peripheral for STM32F429X device or + * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices. + * @param GPIO_Init pointer to a GPIO_InitTypeDef structure that contains + * the configuration information for the specified GPIO peripheral. + * @retval None + */ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) +{ + uint32_t position; + uint32_t ioposition = 0x00U; + uint32_t iocurrent = 0x00U; + uint32_t temp = 0x00U; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Init->Pin)); + assert_param(IS_GPIO_MODE(GPIO_Init->Mode)); + + /* Configure the port pins */ + for(position = 0U; position < GPIO_NUMBER; position++) + { + /* Get the IO position */ + ioposition = 0x01U << position; + /* Get the current IO position */ + iocurrent = (uint32_t)(GPIO_Init->Pin) & ioposition; + + if(iocurrent == ioposition) + { + /*--------------------- GPIO Mode Configuration ------------------------*/ + /* In case of Output or Alternate function mode selection */ + if(((GPIO_Init->Mode & GPIO_MODE) == MODE_OUTPUT) || \ + (GPIO_Init->Mode & GPIO_MODE) == MODE_AF) + { + /* Check the Speed parameter */ + assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); + /* Configure the IO Speed */ + temp = GPIOx->OSPEEDR; + temp &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2U)); + temp |= (GPIO_Init->Speed << (position * 2U)); + GPIOx->OSPEEDR = temp; + + /* Configure the IO Output Type */ + temp = GPIOx->OTYPER; + temp &= ~(GPIO_OTYPER_OT_0 << position) ; + temp |= (((GPIO_Init->Mode & OUTPUT_TYPE) >> OUTPUT_TYPE_Pos) << position); + GPIOx->OTYPER = temp; + } + + if((GPIO_Init->Mode & GPIO_MODE) != MODE_ANALOG) + { + /* Check the parameters */ + assert_param(IS_GPIO_PULL(GPIO_Init->Pull)); + + /* Activate the Pull-up or Pull down resistor for the current IO */ + temp = GPIOx->PUPDR; + temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2U)); + temp |= ((GPIO_Init->Pull) << (position * 2U)); + GPIOx->PUPDR = temp; + } + + /* In case of Alternate function mode selection */ + if((GPIO_Init->Mode & GPIO_MODE) == MODE_AF) + { + /* Check the Alternate function parameter */ + assert_param(IS_GPIO_AF(GPIO_Init->Alternate)); + /* Configure Alternate function mapped with the current IO */ + temp = GPIOx->AFR[position >> 3U]; + temp &= ~(0xFU << ((uint32_t)(position & 0x07U) * 4U)) ; + temp |= ((uint32_t)(GPIO_Init->Alternate) << (((uint32_t)position & 0x07U) * 4U)); + GPIOx->AFR[position >> 3U] = temp; + } + + /* Configure IO Direction mode (Input, Output, Alternate or Analog) */ + temp = GPIOx->MODER; + temp &= ~(GPIO_MODER_MODER0 << (position * 2U)); + temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2U)); + GPIOx->MODER = temp; + + /*--------------------- EXTI Mode Configuration ------------------------*/ + /* Configure the External Interrupt or event for the current IO */ + if((GPIO_Init->Mode & EXTI_MODE) != 0x00U) + { + /* Enable SYSCFG Clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + temp = SYSCFG->EXTICR[position >> 2U]; + temp &= ~(0x0FU << (4U * (position & 0x03U))); + temp |= ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4U * (position & 0x03U))); + SYSCFG->EXTICR[position >> 2U] = temp; + + /* Clear Rising Falling edge configuration */ + temp = EXTI->RTSR; + temp &= ~((uint32_t)iocurrent); + if((GPIO_Init->Mode & TRIGGER_RISING) != 0x00U) + { + temp |= iocurrent; + } + EXTI->RTSR = temp; + + temp = EXTI->FTSR; + temp &= ~((uint32_t)iocurrent); + if((GPIO_Init->Mode & TRIGGER_FALLING) != 0x00U) + { + temp |= iocurrent; + } + EXTI->FTSR = temp; + + temp = EXTI->EMR; + temp &= ~((uint32_t)iocurrent); + if((GPIO_Init->Mode & EXTI_EVT) != 0x00U) + { + temp |= iocurrent; + } + EXTI->EMR = temp; + + /* Clear EXTI line configuration */ + temp = EXTI->IMR; + temp &= ~((uint32_t)iocurrent); + if((GPIO_Init->Mode & EXTI_IT) != 0x00U) + { + temp |= iocurrent; + } + EXTI->IMR = temp; + } + } + } +} + +/** + * @brief De-initializes the GPIOx peripheral registers to their default reset values. + * @param GPIOx where x can be (A..K) to select the GPIO peripheral for STM32F429X device or + * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices. + * @param GPIO_Pin specifies the port bit to be written. + * This parameter can be one of GPIO_PIN_x where x can be (0..15). + * @retval None + */ +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) +{ + uint32_t position; + uint32_t ioposition = 0x00U; + uint32_t iocurrent = 0x00U; + uint32_t tmp = 0x00U; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + + /* Configure the port pins */ + for(position = 0U; position < GPIO_NUMBER; position++) + { + /* Get the IO position */ + ioposition = 0x01U << position; + /* Get the current IO position */ + iocurrent = (GPIO_Pin) & ioposition; + + if(iocurrent == ioposition) + { + /*------------------------- EXTI Mode Configuration --------------------*/ + tmp = SYSCFG->EXTICR[position >> 2U]; + tmp &= (0x0FU << (4U * (position & 0x03U))); + if(tmp == ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4U * (position & 0x03U)))) + { + /* Clear EXTI line configuration */ + EXTI->IMR &= ~((uint32_t)iocurrent); + EXTI->EMR &= ~((uint32_t)iocurrent); + + /* Clear Rising Falling edge configuration */ + EXTI->FTSR &= ~((uint32_t)iocurrent); + EXTI->RTSR &= ~((uint32_t)iocurrent); + + /* Configure the External Interrupt or event for the current IO */ + tmp = 0x0FU << (4U * (position & 0x03U)); + SYSCFG->EXTICR[position >> 2U] &= ~tmp; + } + + /*------------------------- GPIO Mode Configuration --------------------*/ + /* Configure IO Direction in Input Floating Mode */ + GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (position * 2U)); + + /* Configure the default Alternate Function in current IO */ + GPIOx->AFR[position >> 3U] &= ~(0xFU << ((uint32_t)(position & 0x07U) * 4U)) ; + + /* Deactivate the Pull-up and Pull-down resistor for the current IO */ + GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << (position * 2U)); + + /* Configure the default value IO Output Type */ + GPIOx->OTYPER &= ~(GPIO_OTYPER_OT_0 << position) ; + + /* Configure the default value for IO Speed */ + GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2U)); + } + } +} + +/** + * @} + */ + +/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions + * @brief GPIO Read and Write + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Reads the specified input port pin. + * @param GPIOx where x can be (A..K) to select the GPIO peripheral for STM32F429X device or + * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices. + * @param GPIO_Pin specifies the port bit to read. + * This parameter can be GPIO_PIN_x where x can be (0..15). + * @retval The input port pin value. + */ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + GPIO_PinState bitstatus; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + if((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET) + { + bitstatus = GPIO_PIN_SET; + } + else + { + bitstatus = GPIO_PIN_RESET; + } + return bitstatus; +} + +/** + * @brief Sets or clears the selected data port bit. + * + * @note This function uses GPIOx_BSRR register to allow atomic read/modify + * accesses. In this way, there is no risk of an IRQ occurring between + * the read and the modify access. + * + * @param GPIOx where x can be (A..K) to select the GPIO peripheral for STM32F429X device or + * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices. + * @param GPIO_Pin specifies the port bit to be written. + * This parameter can be one of GPIO_PIN_x where x can be (0..15). + * @param PinState specifies the value to be written to the selected bit. + * This parameter can be one of the GPIO_PinState enum values: + * @arg GPIO_PIN_RESET: to clear the port pin + * @arg GPIO_PIN_SET: to set the port pin + * @retval None + */ +void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState) +{ + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + assert_param(IS_GPIO_PIN_ACTION(PinState)); + + if(PinState != GPIO_PIN_RESET) + { + GPIOx->BSRR = GPIO_Pin; + } + else + { + GPIOx->BSRR = (uint32_t)GPIO_Pin << 16U; + } +} + +/** + * @brief Toggles the specified GPIO pins. + * @param GPIOx Where x can be (A..K) to select the GPIO peripheral for STM32F429X device or + * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices. + * @param GPIO_Pin Specifies the pins to be toggled. + * @retval None + */ +void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + uint32_t odr; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* get current Output Data Register value */ + odr = GPIOx->ODR; + + /* Set selected pins that were at low level, and reset ones that were high */ + GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin); +} + +/** + * @brief Locks GPIO Pins configuration registers. + * @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR, + * GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH. + * @note The configuration of the locked GPIO pins can no longer be modified + * until the next reset. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F4 family + * @param GPIO_Pin specifies the port bit to be locked. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15). + * @retval None + */ +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + __IO uint32_t tmp = GPIO_LCKR_LCKK; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Apply lock key write sequence */ + tmp |= GPIO_Pin; + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */ + GPIOx->LCKR = GPIO_Pin; + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Read LCKR register. This read is mandatory to complete key lock sequence */ + tmp = GPIOx->LCKR; + + /* Read again in order to confirm lock is active */ + if((GPIOx->LCKR & GPIO_LCKR_LCKK) != RESET) + { + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief This function handles EXTI interrupt request. + * @param GPIO_Pin Specifies the pins connected EXTI line + * @retval None + */ +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin) +{ + /* EXTI line interrupt detected */ + if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != RESET) + { + __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin); + HAL_GPIO_EXTI_Callback(GPIO_Pin); + } +} + +/** + * @brief EXTI line detection callbacks. + * @param GPIO_Pin Specifies the pins connected EXTI line + * @retval None + */ +__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(GPIO_Pin); + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_GPIO_EXTI_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + + +/** + * @} + */ + +#endif /* HAL_GPIO_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/stm32f4xx_hal_gpio.h b/libs/hal/stm32f4xx_hal_gpio.h similarity index 97% rename from Drivers/stm32f4xx_hal_gpio.h rename to libs/hal/stm32f4xx_hal_gpio.h index 661400f..5f3d749 100644 --- a/Drivers/stm32f4xx_hal_gpio.h +++ b/libs/hal/stm32f4xx_hal_gpio.h @@ -1,325 +1,325 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_gpio.h - * @author MCD Application Team - * @brief Header file of GPIO HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_GPIO_H -#define __STM32F4xx_HAL_GPIO_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup GPIO - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup GPIO_Exported_Types GPIO Exported Types - * @{ - */ - -/** - * @brief GPIO Init structure definition - */ -typedef struct -{ - uint32_t Pin; /*!< Specifies the GPIO pins to be configured. - This parameter can be any value of @ref GPIO_pins_define */ - - uint32_t Mode; /*!< Specifies the operating mode for the selected pins. - This parameter can be a value of @ref GPIO_mode_define */ - - uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins. - This parameter can be a value of @ref GPIO_pull_define */ - - uint32_t Speed; /*!< Specifies the speed for the selected pins. - This parameter can be a value of @ref GPIO_speed_define */ - - uint32_t Alternate; /*!< Peripheral to be connected to the selected pins. - This parameter can be a value of @ref GPIO_Alternate_function_selection */ -}GPIO_InitTypeDef; - -/** - * @brief GPIO Bit SET and Bit RESET enumeration - */ -typedef enum -{ - GPIO_PIN_RESET = 0, - GPIO_PIN_SET -}GPIO_PinState; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup GPIO_Exported_Constants GPIO Exported Constants - * @{ - */ - -/** @defgroup GPIO_pins_define GPIO pins define - * @{ - */ -#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */ -#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */ -#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */ -#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */ -#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */ -#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */ -#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */ -#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */ -#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */ -#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */ -#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */ -#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */ -#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */ -#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */ -#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */ -#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */ -#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */ - -#define GPIO_PIN_MASK 0x0000FFFFU /* PIN mask for assert test */ -/** - * @} - */ - -/** @defgroup GPIO_mode_define GPIO mode define - * @brief GPIO Configuration Mode - * Elements values convention: 0x00WX00YZ - * - W : EXTI trigger detection on 3 bits - * - X : EXTI mode (IT or Event) on 2 bits - * - Y : Output type (Push Pull or Open Drain) on 1 bit - * - Z : GPIO mode (Input, Output, Alternate or Analog) on 2 bits - * @{ - */ -#define GPIO_MODE_INPUT MODE_INPUT /*!< Input Floating Mode */ -#define GPIO_MODE_OUTPUT_PP (MODE_OUTPUT | OUTPUT_PP) /*!< Output Push Pull Mode */ -#define GPIO_MODE_OUTPUT_OD (MODE_OUTPUT | OUTPUT_OD) /*!< Output Open Drain Mode */ -#define GPIO_MODE_AF_PP (MODE_AF | OUTPUT_PP) /*!< Alternate Function Push Pull Mode */ -#define GPIO_MODE_AF_OD (MODE_AF | OUTPUT_OD) /*!< Alternate Function Open Drain Mode */ - -#define GPIO_MODE_ANALOG MODE_ANALOG /*!< Analog Mode */ - -#define GPIO_MODE_IT_RISING (MODE_INPUT | EXTI_IT | TRIGGER_RISING) /*!< External Interrupt Mode with Rising edge trigger detection */ -#define GPIO_MODE_IT_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_FALLING) /*!< External Interrupt Mode with Falling edge trigger detection */ -#define GPIO_MODE_IT_RISING_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ - -#define GPIO_MODE_EVT_RISING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING) /*!< External Event Mode with Rising edge trigger detection */ -#define GPIO_MODE_EVT_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_FALLING) /*!< External Event Mode with Falling edge trigger detection */ -#define GPIO_MODE_EVT_RISING_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Event Mode with Rising/Falling edge trigger detection */ - -/** - * @} - */ - -/** @defgroup GPIO_speed_define GPIO speed define - * @brief GPIO Output Maximum frequency - * @{ - */ -#define GPIO_SPEED_FREQ_LOW 0x00000000U /*!< IO works at 2 MHz, please refer to the product datasheet */ -#define GPIO_SPEED_FREQ_MEDIUM 0x00000001U /*!< range 12,5 MHz to 50 MHz, please refer to the product datasheet */ -#define GPIO_SPEED_FREQ_HIGH 0x00000002U /*!< range 25 MHz to 100 MHz, please refer to the product datasheet */ -#define GPIO_SPEED_FREQ_VERY_HIGH 0x00000003U /*!< range 50 MHz to 200 MHz, please refer to the product datasheet */ -/** - * @} - */ - - /** @defgroup GPIO_pull_define GPIO pull define - * @brief GPIO Pull-Up or Pull-Down Activation - * @{ - */ -#define GPIO_NOPULL 0x00000000U /*!< No Pull-up or Pull-down activation */ -#define GPIO_PULLUP 0x00000001U /*!< Pull-up activation */ -#define GPIO_PULLDOWN 0x00000002U /*!< Pull-down activation */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup GPIO_Exported_Macros GPIO Exported Macros - * @{ - */ - -/** - * @brief Checks whether the specified EXTI line flag is set or not. - * @param __EXTI_LINE__ specifies the EXTI line flag to check. - * This parameter can be GPIO_PIN_x where x can be(0..15) - * @retval The new state of __EXTI_LINE__ (SET or RESET). - */ -#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__)) - -/** - * @brief Clears the EXTI's line pending flags. - * @param __EXTI_LINE__ specifies the EXTI lines flags to clear. - * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) - * @retval None - */ -#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__)) - -/** - * @brief Checks whether the specified EXTI line is asserted or not. - * @param __EXTI_LINE__ specifies the EXTI line to check. - * This parameter can be GPIO_PIN_x where x can be(0..15) - * @retval The new state of __EXTI_LINE__ (SET or RESET). - */ -#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__)) - -/** - * @brief Clears the EXTI's line pending bits. - * @param __EXTI_LINE__ specifies the EXTI lines to clear. - * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) - * @retval None - */ -#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__)) - -/** - * @brief Generates a Software interrupt on selected EXTI line. - * @param __EXTI_LINE__ specifies the EXTI line to check. - * This parameter can be GPIO_PIN_x where x can be(0..15) - * @retval None - */ -#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__)) -/** - * @} - */ - -/* Include GPIO HAL Extension module */ -#include "stm32f4xx_hal_gpio_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup GPIO_Exported_Functions - * @{ - */ - -/** @addtogroup GPIO_Exported_Functions_Group1 - * @{ - */ -/* Initialization and de-initialization functions *****************************/ -void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init); -void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin); -/** - * @} - */ - -/** @addtogroup GPIO_Exported_Functions_Group2 - * @{ - */ -/* IO operation functions *****************************************************/ -GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState); -void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin); -void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin); - -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup GPIO_Private_Constants GPIO Private Constants - * @{ - */ -#define GPIO_MODE_Pos 0U -#define GPIO_MODE (0x3UL << GPIO_MODE_Pos) -#define MODE_INPUT (0x0UL << GPIO_MODE_Pos) -#define MODE_OUTPUT (0x1UL << GPIO_MODE_Pos) -#define MODE_AF (0x2UL << GPIO_MODE_Pos) -#define MODE_ANALOG (0x3UL << GPIO_MODE_Pos) -#define OUTPUT_TYPE_Pos 4U -#define OUTPUT_TYPE (0x1UL << OUTPUT_TYPE_Pos) -#define OUTPUT_PP (0x0UL << OUTPUT_TYPE_Pos) -#define OUTPUT_OD (0x1UL << OUTPUT_TYPE_Pos) -#define EXTI_MODE_Pos 16U -#define EXTI_MODE (0x3UL << EXTI_MODE_Pos) -#define EXTI_IT (0x1UL << EXTI_MODE_Pos) -#define EXTI_EVT (0x2UL << EXTI_MODE_Pos) -#define TRIGGER_MODE_Pos 20U -#define TRIGGER_MODE (0x7UL << TRIGGER_MODE_Pos) -#define TRIGGER_RISING (0x1UL << TRIGGER_MODE_Pos) -#define TRIGGER_FALLING (0x2UL << TRIGGER_MODE_Pos) - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup GPIO_Private_Macros GPIO Private Macros - * @{ - */ -#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET)) -#define IS_GPIO_PIN(PIN) (((((uint32_t)PIN) & GPIO_PIN_MASK ) != 0x00U) && ((((uint32_t)PIN) & ~GPIO_PIN_MASK) == 0x00U)) -#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\ - ((MODE) == GPIO_MODE_OUTPUT_PP) ||\ - ((MODE) == GPIO_MODE_OUTPUT_OD) ||\ - ((MODE) == GPIO_MODE_AF_PP) ||\ - ((MODE) == GPIO_MODE_AF_OD) ||\ - ((MODE) == GPIO_MODE_IT_RISING) ||\ - ((MODE) == GPIO_MODE_IT_FALLING) ||\ - ((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\ - ((MODE) == GPIO_MODE_EVT_RISING) ||\ - ((MODE) == GPIO_MODE_EVT_FALLING) ||\ - ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\ - ((MODE) == GPIO_MODE_ANALOG)) -#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_FREQ_LOW) || ((SPEED) == GPIO_SPEED_FREQ_MEDIUM) || \ - ((SPEED) == GPIO_SPEED_FREQ_HIGH) || ((SPEED) == GPIO_SPEED_FREQ_VERY_HIGH)) -#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \ - ((PULL) == GPIO_PULLDOWN)) -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup GPIO_Private_Functions GPIO Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_GPIO_H */ - +/** + ****************************************************************************** + * @file stm32f4xx_hal_gpio.h + * @author MCD Application Team + * @brief Header file of GPIO HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_GPIO_H +#define __STM32F4xx_HAL_GPIO_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup GPIO + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Types GPIO Exported Types + * @{ + */ + +/** + * @brief GPIO Init structure definition + */ +typedef struct +{ + uint32_t Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_pins_define */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIO_mode_define */ + + uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins. + This parameter can be a value of @ref GPIO_pull_define */ + + uint32_t Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIO_speed_define */ + + uint32_t Alternate; /*!< Peripheral to be connected to the selected pins. + This parameter can be a value of @ref GPIO_Alternate_function_selection */ +}GPIO_InitTypeDef; + +/** + * @brief GPIO Bit SET and Bit RESET enumeration + */ +typedef enum +{ + GPIO_PIN_RESET = 0, + GPIO_PIN_SET +}GPIO_PinState; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup GPIO_Exported_Constants GPIO Exported Constants + * @{ + */ + +/** @defgroup GPIO_pins_define GPIO pins define + * @{ + */ +#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */ +#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */ +#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */ +#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */ +#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */ +#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */ +#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */ +#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */ +#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */ +#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */ +#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */ +#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */ +#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */ +#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */ +#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */ +#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */ +#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */ + +#define GPIO_PIN_MASK 0x0000FFFFU /* PIN mask for assert test */ +/** + * @} + */ + +/** @defgroup GPIO_mode_define GPIO mode define + * @brief GPIO Configuration Mode + * Elements values convention: 0x00WX00YZ + * - W : EXTI trigger detection on 3 bits + * - X : EXTI mode (IT or Event) on 2 bits + * - Y : Output type (Push Pull or Open Drain) on 1 bit + * - Z : GPIO mode (Input, Output, Alternate or Analog) on 2 bits + * @{ + */ +#define GPIO_MODE_INPUT MODE_INPUT /*!< Input Floating Mode */ +#define GPIO_MODE_OUTPUT_PP (MODE_OUTPUT | OUTPUT_PP) /*!< Output Push Pull Mode */ +#define GPIO_MODE_OUTPUT_OD (MODE_OUTPUT | OUTPUT_OD) /*!< Output Open Drain Mode */ +#define GPIO_MODE_AF_PP (MODE_AF | OUTPUT_PP) /*!< Alternate Function Push Pull Mode */ +#define GPIO_MODE_AF_OD (MODE_AF | OUTPUT_OD) /*!< Alternate Function Open Drain Mode */ + +#define GPIO_MODE_ANALOG MODE_ANALOG /*!< Analog Mode */ + +#define GPIO_MODE_IT_RISING (MODE_INPUT | EXTI_IT | TRIGGER_RISING) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define GPIO_MODE_IT_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_FALLING) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define GPIO_MODE_IT_RISING_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ + +#define GPIO_MODE_EVT_RISING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING) /*!< External Event Mode with Rising edge trigger detection */ +#define GPIO_MODE_EVT_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_FALLING) /*!< External Event Mode with Falling edge trigger detection */ +#define GPIO_MODE_EVT_RISING_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Event Mode with Rising/Falling edge trigger detection */ + +/** + * @} + */ + +/** @defgroup GPIO_speed_define GPIO speed define + * @brief GPIO Output Maximum frequency + * @{ + */ +#define GPIO_SPEED_FREQ_LOW 0x00000000U /*!< IO works at 2 MHz, please refer to the product datasheet */ +#define GPIO_SPEED_FREQ_MEDIUM 0x00000001U /*!< range 12,5 MHz to 50 MHz, please refer to the product datasheet */ +#define GPIO_SPEED_FREQ_HIGH 0x00000002U /*!< range 25 MHz to 100 MHz, please refer to the product datasheet */ +#define GPIO_SPEED_FREQ_VERY_HIGH 0x00000003U /*!< range 50 MHz to 200 MHz, please refer to the product datasheet */ +/** + * @} + */ + + /** @defgroup GPIO_pull_define GPIO pull define + * @brief GPIO Pull-Up or Pull-Down Activation + * @{ + */ +#define GPIO_NOPULL 0x00000000U /*!< No Pull-up or Pull-down activation */ +#define GPIO_PULLUP 0x00000001U /*!< Pull-up activation */ +#define GPIO_PULLDOWN 0x00000002U /*!< Pull-down activation */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Macros GPIO Exported Macros + * @{ + */ + +/** + * @brief Checks whether the specified EXTI line flag is set or not. + * @param __EXTI_LINE__ specifies the EXTI line flag to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__)) + +/** + * @brief Clears the EXTI's line pending flags. + * @param __EXTI_LINE__ specifies the EXTI lines flags to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__)) + +/** + * @brief Checks whether the specified EXTI line is asserted or not. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__)) + +/** + * @brief Clears the EXTI's line pending bits. + * @param __EXTI_LINE__ specifies the EXTI lines to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__)) + +/** + * @brief Generates a Software interrupt on selected EXTI line. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__)) +/** + * @} + */ + +/* Include GPIO HAL Extension module */ +#include "stm32f4xx_hal_gpio_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup GPIO_Exported_Functions + * @{ + */ + +/** @addtogroup GPIO_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init); +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin); +/** + * @} + */ + +/** @addtogroup GPIO_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState); +void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin); + +/** + * @} + */ + +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup GPIO_Private_Constants GPIO Private Constants + * @{ + */ +#define GPIO_MODE_Pos 0U +#define GPIO_MODE (0x3UL << GPIO_MODE_Pos) +#define MODE_INPUT (0x0UL << GPIO_MODE_Pos) +#define MODE_OUTPUT (0x1UL << GPIO_MODE_Pos) +#define MODE_AF (0x2UL << GPIO_MODE_Pos) +#define MODE_ANALOG (0x3UL << GPIO_MODE_Pos) +#define OUTPUT_TYPE_Pos 4U +#define OUTPUT_TYPE (0x1UL << OUTPUT_TYPE_Pos) +#define OUTPUT_PP (0x0UL << OUTPUT_TYPE_Pos) +#define OUTPUT_OD (0x1UL << OUTPUT_TYPE_Pos) +#define EXTI_MODE_Pos 16U +#define EXTI_MODE (0x3UL << EXTI_MODE_Pos) +#define EXTI_IT (0x1UL << EXTI_MODE_Pos) +#define EXTI_EVT (0x2UL << EXTI_MODE_Pos) +#define TRIGGER_MODE_Pos 20U +#define TRIGGER_MODE (0x7UL << TRIGGER_MODE_Pos) +#define TRIGGER_RISING (0x1UL << TRIGGER_MODE_Pos) +#define TRIGGER_FALLING (0x2UL << TRIGGER_MODE_Pos) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup GPIO_Private_Macros GPIO Private Macros + * @{ + */ +#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET)) +#define IS_GPIO_PIN(PIN) (((((uint32_t)PIN) & GPIO_PIN_MASK ) != 0x00U) && ((((uint32_t)PIN) & ~GPIO_PIN_MASK) == 0x00U)) +#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\ + ((MODE) == GPIO_MODE_OUTPUT_PP) ||\ + ((MODE) == GPIO_MODE_OUTPUT_OD) ||\ + ((MODE) == GPIO_MODE_AF_PP) ||\ + ((MODE) == GPIO_MODE_AF_OD) ||\ + ((MODE) == GPIO_MODE_IT_RISING) ||\ + ((MODE) == GPIO_MODE_IT_FALLING) ||\ + ((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\ + ((MODE) == GPIO_MODE_EVT_RISING) ||\ + ((MODE) == GPIO_MODE_EVT_FALLING) ||\ + ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\ + ((MODE) == GPIO_MODE_ANALOG)) +#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_FREQ_LOW) || ((SPEED) == GPIO_SPEED_FREQ_MEDIUM) || \ + ((SPEED) == GPIO_SPEED_FREQ_HIGH) || ((SPEED) == GPIO_SPEED_FREQ_VERY_HIGH)) +#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \ + ((PULL) == GPIO_PULLDOWN)) +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup GPIO_Private_Functions GPIO Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_GPIO_H */ + diff --git a/Drivers/stm32f4xx_hal_gpio_ex.h b/libs/hal/stm32f4xx_hal_gpio_ex.h similarity index 98% rename from Drivers/stm32f4xx_hal_gpio_ex.h rename to libs/hal/stm32f4xx_hal_gpio_ex.h index 393f388..5e0b7cc 100644 --- a/Drivers/stm32f4xx_hal_gpio_ex.h +++ b/libs/hal/stm32f4xx_hal_gpio_ex.h @@ -1,1590 +1,1590 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_gpio_ex.h - * @author MCD Application Team - * @brief Header file of GPIO HAL Extension module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_GPIO_EX_H -#define __STM32F4xx_HAL_GPIO_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup GPIOEx GPIOEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup GPIOEx_Exported_Constants GPIO Exported Constants - * @{ - */ - -/** @defgroup GPIO_Alternate_function_selection GPIO Alternate Function Selection - * @{ - */ - -/*------------------------------------------ STM32F429xx/STM32F439xx ---------*/ -#if defined(STM32F429xx) || defined(STM32F439xx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ -#define GPIO_AF5_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */ -#define GPIO_AF5_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ -#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ -#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART7 Alternate Function mapping */ -#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ -#define GPIO_AF9_LTDC ((uint8_t)0x09) /* LCD-TFT Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ -#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ - -/** - * @brief AF 14 selection - */ -#define GPIO_AF14_LTDC ((uint8_t)0x0E) /* LCD-TFT Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F429xx || STM32F439xx */ -/*----------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F427xx/STM32F437xx------------------*/ -#if defined(STM32F427xx) || defined(STM32F437xx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ -#define GPIO_AF5_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */ -#define GPIO_AF5_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */ -/** @brief GPIO_Legacy - */ -#define GPIO_AF5_I2S3ext GPIO_AF5_SPI3 /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ -#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ -#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART7 Alternate Function mapping */ -#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ -#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F427xx || STM32F437xx */ -/*----------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F407xx/STM32F417xx------------------*/ -#if defined(STM32F407xx) || defined(STM32F417xx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_FSMC ((uint8_t)0x0C) /* FSMC Alternate Function mapping */ -#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F407xx || STM32F417xx */ -/*----------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F405xx/STM32F415xx------------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_FSMC ((uint8_t)0x0C) /* FSMC Alternate Function mapping */ -#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F405xx || STM32F415xx */ - -/*----------------------------------------------------------------------------*/ - -/*---------------------------------------- STM32F401xx------------------------*/ -#if defined(STM32F401xC) || defined(STM32F401xE) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */ -#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */ - - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F401xC || STM32F401xE */ -/*----------------------------------------------------------------------------*/ - -/*--------------- STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx-------------*/ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ -#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04) /* FMPI2C1 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4/I2S4 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* I2S2 Alternate Function mapping */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_SPI4 ((uint8_t)0x06) /* SPI4/I2S4 Alternate Function mapping */ -#define GPIO_AF6_SPI5 ((uint8_t)0x06) /* SPI5/I2S5 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ -#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM1 Alternate Function mapping */ -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ -#define GPIO_AF8_USART3 ((uint8_t)0x08) /* USART3 Alternate Function mapping */ -#define GPIO_AF8_DFSDM1 ((uint8_t)0x08) /* DFSDM1 Alternate Function mapping */ -#define GPIO_AF8_CAN1 ((uint8_t)0x08) /* CAN1 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ -#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */ -#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */ -#define GPIO_AF9_FMPI2C1 ((uint8_t)0x09) /* FMPI2C1 Alternate Function mapping */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_QSPI ((uint8_t)0x09) /* QSPI Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_DFSDM1 ((uint8_t)0x0A) /* DFSDM1 Alternate Function mapping */ -#define GPIO_AF10_QSPI ((uint8_t)0x0A) /* QSPI Alternate Function mapping */ -#define GPIO_AF10_FMC ((uint8_t)0x0A) /* FMC Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ -#define GPIO_AF12_FSMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ - -/*----------------------------------------------------------------------------*/ - -/*--------------- STM32F413xx/STM32F423xx-------------------------------------*/ -#if defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ -#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ -#define GPIO_AF3_DFSDM2 ((uint8_t)0x03) /* DFSDM2 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ -#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04) /* FMPI2C1 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4/I2S4 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* I2S2 Alternate Function mapping */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_SPI4 ((uint8_t)0x06) /* SPI4/I2S4 Alternate Function mapping */ -#define GPIO_AF6_SPI5 ((uint8_t)0x06) /* SPI5/I2S5 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ -#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM1 Alternate Function mapping */ -#define GPIO_AF6_DFSDM2 ((uint8_t)0x06) /* DFSDM2 Alternate Function mapping */ -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF7_SAI1 ((uint8_t)0x07) /* SAI1 Alternate Function mapping */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ -#define GPIO_AF7_DFSDM2 ((uint8_t)0x07) /* DFSDM2 Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ -#define GPIO_AF8_USART3 ((uint8_t)0x08) /* USART3 Alternate Function mapping */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART8 Alternate Function mapping */ -#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */ -#define GPIO_AF8_DFSDM1 ((uint8_t)0x08) /* DFSDM1 Alternate Function mapping */ -#define GPIO_AF8_CAN1 ((uint8_t)0x08) /* CAN1 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ -#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */ -#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */ -#define GPIO_AF9_FMPI2C1 ((uint8_t)0x09) /* FMPI2C1 Alternate Function mapping */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_QSPI ((uint8_t)0x09) /* QSPI Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_SAI1 ((uint8_t)0x0A) /* SAI1 Alternate Function mapping */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_DFSDM1 ((uint8_t)0x0A) /* DFSDM1 Alternate Function mapping */ -#define GPIO_AF10_DFSDM2 ((uint8_t)0x0A) /* DFSDM2 Alternate Function mapping */ -#define GPIO_AF10_QSPI ((uint8_t)0x0A) /* QSPI Alternate Function mapping */ -#define GPIO_AF10_FSMC ((uint8_t)0x0A) /* FSMC Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_UART4 ((uint8_t)0x0B) /* UART4 Alternate Function mapping */ -#define GPIO_AF11_UART5 ((uint8_t)0x0B) /* UART5 Alternate Function mapping */ -#define GPIO_AF11_UART9 ((uint8_t)0x0B) /* UART9 Alternate Function mapping */ -#define GPIO_AF11_UART10 ((uint8_t)0x0B) /* UART10 Alternate Function mapping */ -#define GPIO_AF11_CAN3 ((uint8_t)0x0B) /* CAN3 Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ -#define GPIO_AF12_FSMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ - -/** - * @brief AF 14 selection - */ -#define GPIO_AF14_RNG ((uint8_t)0x0E) /* RNG Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F413xx || STM32F423xx */ - -/*---------------------------------------- STM32F411xx------------------------*/ -#if defined(STM32F411xE) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* I2S2 Alternate Function mapping */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_SPI4 ((uint8_t)0x06) /* SPI4/I2S4 Alternate Function mapping */ -#define GPIO_AF6_SPI5 ((uint8_t)0x06) /* SPI5/I2S5 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ -#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */ -#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F411xE */ - -/*---------------------------------------- STM32F410xx------------------------*/ -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04) /* FMPI2C1 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */ -#if defined(STM32F410Cx) || defined(STM32F410Rx) -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#endif /* STM32F410Cx || STM32F410Rx */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI1 ((uint8_t)0x06) /* SPI1 Alternate Function mapping */ -#if defined(STM32F410Cx) || defined(STM32F410Rx) -#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* I2S2 Alternate Function mapping */ -#endif /* STM32F410Cx || STM32F410Rx */ -#define GPIO_AF6_SPI5 ((uint8_t)0x06) /* SPI5/I2S5 Alternate Function mapping */ -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */ -#define GPIO_AF9_FMPI2C1 ((uint8_t)0x09) /* FMPI2C1 Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -/*---------------------------------------- STM32F446xx -----------------------*/ -#if defined(STM32F446xx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ -#define GPIO_AF3_CEC ((uint8_t)0x03) /* CEC Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ -#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04) /* FMPI2C1 Alternate Function mapping */ -#define GPIO_AF4_CEC ((uint8_t)0x04) /* CEC Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_SPI4 ((uint8_t)0x06) /* SPI4 Alternate Function mapping */ -#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_UART5 ((uint8_t)0x07) /* UART5 Alternate Function mapping */ -#define GPIO_AF7_SPI2 ((uint8_t)0x07) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF7_SPDIFRX ((uint8_t)0x07) /* SPDIFRX Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ -#define GPIO_AF8_SPDIFRX ((uint8_t)0x08) /* SPDIFRX Alternate Function mapping */ -#define GPIO_AF8_SAI2 ((uint8_t)0x08) /* SAI2 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ -#define GPIO_AF9_QSPI ((uint8_t)0x09) /* QSPI Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */ -#define GPIO_AF10_SAI2 ((uint8_t)0x0A) /* SAI2 Alternate Function mapping */ -#define GPIO_AF10_QSPI ((uint8_t)0x0A) /* QSPI Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ -#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ - -#endif /* STM32F446xx */ -/*----------------------------------------------------------------------------*/ - -/*-------------------------------- STM32F469xx/STM32F479xx--------------------*/ -#if defined(STM32F469xx) || defined(STM32F479xx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ -#define GPIO_AF5_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */ -#define GPIO_AF5_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ -#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ -#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART7 Alternate Function mapping */ -#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ -#define GPIO_AF9_LTDC ((uint8_t)0x09) /* LCD-TFT Alternate Function mapping */ -#define GPIO_AF9_QSPI ((uint8_t)0x09) /* QSPI Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */ -#define GPIO_AF10_QSPI ((uint8_t)0x0A) /* QSPI Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ -#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */ -#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ -#define GPIO_AF13_DSI ((uint8_t)0x0D) /* DSI Alternate Function mapping */ - -/** - * @brief AF 14 selection - */ -#define GPIO_AF14_LTDC ((uint8_t)0x0E) /* LCD-TFT Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ - -#endif /* STM32F469xx || STM32F479xx */ -/*----------------------------------------------------------------------------*/ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup GPIOEx_Exported_Macros GPIO Exported Macros - * @{ - */ -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup GPIOEx_Exported_Functions GPIO Exported Functions - * @{ - */ -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup GPIOEx_Private_Constants GPIO Private Constants - * @{ - */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup GPIOEx_Private_Macros GPIO Private Macros - * @{ - */ -/** @defgroup GPIOEx_Get_Port_Index GPIO Get Port Index - * @{ - */ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U :\ - ((__GPIOx__) == (GPIOE))? 4U :\ - ((__GPIOx__) == (GPIOF))? 5U :\ - ((__GPIOx__) == (GPIOG))? 6U :\ - ((__GPIOx__) == (GPIOH))? 7U : 8U) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U :\ - ((__GPIOx__) == (GPIOE))? 4U :\ - ((__GPIOx__) == (GPIOF))? 5U :\ - ((__GPIOx__) == (GPIOG))? 6U :\ - ((__GPIOx__) == (GPIOH))? 7U :\ - ((__GPIOx__) == (GPIOI))? 8U :\ - ((__GPIOx__) == (GPIOJ))? 9U : 10U) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U : 7U) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U :\ - ((__GPIOx__) == (GPIOE))? 4U : 7U) -#endif /* STM32F401xC || STM32F401xE || STM32F411xE */ - -#if defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U :\ - ((__GPIOx__) == (GPIOE))? 4U :\ - ((__GPIOx__) == (GPIOF))? 5U :\ - ((__GPIOx__) == (GPIOG))? 6U : 7U) -#endif /* STM32F446xx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Vx) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U :\ - ((__GPIOx__) == (GPIOE))? 4U : 7U) -#endif /* STM32F412Vx */ -#if defined(STM32F412Rx) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U : 7U) -#endif /* STM32F412Rx */ -#if defined(STM32F412Cx) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U : 7U) -#endif /* STM32F412Cx */ - -/** - * @} - */ - -/** @defgroup GPIOEx_IS_Alternat_function_selection GPIO Check Alternate Function - * @{ - */ -/*------------------------- STM32F429xx/STM32F439xx---------------------------*/ -#if defined(STM32F429xx) || defined(STM32F439xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ - ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ - ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ - ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \ - ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \ - ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \ - ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \ - ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1) || \ - ((AF) == GPIO_AF14_LTDC)) - -#endif /* STM32F429xx || STM32F439xx */ -/*----------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F427xx/STM32F437xx------------------*/ -#if defined(STM32F427xx) || defined(STM32F437xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ - ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ - ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ - ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \ - ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \ - ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \ - ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \ - ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1)) - -#endif /* STM32F427xx || STM32F437xx */ -/*----------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F407xx/STM32F417xx------------------*/ -#if defined(STM32F407xx) || defined(STM32F417xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ - ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ - ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ - ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \ - ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \ - ((AF) == GPIO_AF12_FSMC) || ((AF) == GPIO_AF15_EVENTOUT)) - -#endif /* STM32F407xx || STM32F417xx */ -/*----------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F405xx/STM32F415xx------------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ - ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ - ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ - ((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDIO) || \ - ((AF) == GPIO_AF12_FSMC) || ((AF) == GPIO_AF15_EVENTOUT)) - -#endif /* STM32F405xx || STM32F415xx */ - -/*----------------------------------------------------------------------------*/ - -/*---------------------------------------- STM32F401xx------------------------*/ -#if defined(STM32F401xC) || defined(STM32F401xE) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF12_SDIO) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM9) || \ - ((AF) == GPIO_AF3_TIM10) || ((AF) == GPIO_AF3_TIM11) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ - ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF7_USART1) || \ - ((AF) == GPIO_AF7_USART2) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF9_I2C2) || ((AF) == GPIO_AF9_I2C3) || \ - ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF15_EVENTOUT)) -#endif /* STM32F401xC || STM32F401xE */ -/*----------------------------------------------------------------------------*/ -/*---------------------------------------- STM32F410xx------------------------*/ -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define IS_GPIO_AF(AF) (((AF) < 10U) || ((AF) == 15U)) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -/*---------------------------------------- STM32F411xx------------------------*/ -#if defined(STM32F411xE) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF4_I2C1) || \ - ((AF) == GPIO_AF4_I2C2) || ((AF) == GPIO_AF4_I2C3) || \ - ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \ - ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF6_SPI4) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF6_SPI5) || ((AF) == GPIO_AF7_SPI3) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF8_USART6) || ((AF) == GPIO_AF10_OTG_FS) || \ - ((AF) == GPIO_AF9_I2C2) || ((AF) == GPIO_AF9_I2C3) || \ - ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF15_EVENTOUT)) - -#endif /* STM32F411xE */ -/*----------------------------------------------------------------------------*/ - -/*----------------------------------------------- STM32F446xx ----------------*/ -#if defined(STM32F446xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ - ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ - ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ - ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \ - ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \ - ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1) || \ - ((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \ - ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF6_SPI2) || \ - ((AF) == GPIO_AF6_SPI4) || ((AF) == GPIO_AF7_UART5) || \ - ((AF) == GPIO_AF7_SPI2) || ((AF) == GPIO_AF7_SPI3) || \ - ((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \ - ((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF9_QSPI) || \ - ((AF) == GPIO_AF10_SAI2) || ((AF) == GPIO_AF10_QSPI)) - -#endif /* STM32F446xx */ -/*----------------------------------------------------------------------------*/ - -/*------------------------------------------- STM32F469xx/STM32F479xx --------*/ -#if defined(STM32F469xx) || defined(STM32F479xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ - ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ - ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ - ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \ - ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \ - ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \ - ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \ - ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1) || \ - ((AF) == GPIO_AF14_LTDC) || ((AF) == GPIO_AF13_DSI) || \ - ((AF) == GPIO_AF9_QSPI) || ((AF) == GPIO_AF10_QSPI)) - -#endif /* STM32F469xx || STM32F479xx */ -/*----------------------------------------------------------------------------*/ - -/*------------------STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx-----------*/ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) -#define IS_GPIO_AF(AF) (((AF) < 16U) && ((AF) != 11U) && ((AF) != 14U) && ((AF) != 13U)) -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ -/*----------------------------------------------------------------------------*/ - -/*------------------STM32F413xx/STM32F423xx-----------------------------------*/ -#if defined(STM32F413xx) || defined(STM32F423xx) -#define IS_GPIO_AF(AF) (((AF) < 16U) && ((AF) != 13U)) -#endif /* STM32F413xx || STM32F423xx */ -/*----------------------------------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup GPIOEx_Private_Functions GPIO Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_GPIO_EX_H */ - +/** + ****************************************************************************** + * @file stm32f4xx_hal_gpio_ex.h + * @author MCD Application Team + * @brief Header file of GPIO HAL Extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_GPIO_EX_H +#define __STM32F4xx_HAL_GPIO_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIOEx GPIOEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Constants GPIO Exported Constants + * @{ + */ + +/** @defgroup GPIO_Alternate_function_selection GPIO Alternate Function Selection + * @{ + */ + +/*------------------------------------------ STM32F429xx/STM32F439xx ---------*/ +#if defined(STM32F429xx) || defined(STM32F439xx) +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ +#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ +#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ +#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ +#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ +#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ +#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ +#define GPIO_AF5_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */ +#define GPIO_AF5_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */ +#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ +#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ +#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ +#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ +#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ +#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ +#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ +#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART7 Alternate Function mapping */ +#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ +#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ +#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ +#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ +#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ +#define GPIO_AF9_LTDC ((uint8_t)0x09) /* LCD-TFT Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ +#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */ + +/** + * @brief AF 11 selection + */ +#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ +#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */ +#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ + +/** + * @brief AF 13 selection + */ +#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ + +/** + * @brief AF 14 selection + */ +#define GPIO_AF14_LTDC ((uint8_t)0x0E) /* LCD-TFT Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ +#endif /* STM32F429xx || STM32F439xx */ +/*----------------------------------------------------------------------------*/ + +/*---------------------------------- STM32F427xx/STM32F437xx------------------*/ +#if defined(STM32F427xx) || defined(STM32F437xx) +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ +#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ +#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ +#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ +#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ +#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ +#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ +#define GPIO_AF5_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */ +#define GPIO_AF5_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */ +/** @brief GPIO_Legacy + */ +#define GPIO_AF5_I2S3ext GPIO_AF5_SPI3 /* I2S3ext_SD Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ +#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ +#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ +#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ +#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ +#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ +#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ +#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART7 Alternate Function mapping */ +#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ +#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ +#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ +#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ +#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ +#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */ + +/** + * @brief AF 11 selection + */ +#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ +#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */ +#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ + +/** + * @brief AF 13 selection + */ +#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ +#endif /* STM32F427xx || STM32F437xx */ +/*----------------------------------------------------------------------------*/ + +/*---------------------------------- STM32F407xx/STM32F417xx------------------*/ +#if defined(STM32F407xx) || defined(STM32F417xx) +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ +#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ +#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ +#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ +#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ +#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ +#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ +#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ +#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ +#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ +#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ +#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ +#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ +#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ +#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ +#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */ + +/** + * @brief AF 11 selection + */ +#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_FSMC ((uint8_t)0x0C) /* FSMC Alternate Function mapping */ +#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */ +#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ + +/** + * @brief AF 13 selection + */ +#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ +#endif /* STM32F407xx || STM32F417xx */ +/*----------------------------------------------------------------------------*/ + +/*---------------------------------- STM32F405xx/STM32F415xx------------------*/ +#if defined(STM32F405xx) || defined(STM32F415xx) +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ +#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ +#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ +#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ +#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ +#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ +#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ +#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ +#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ +#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ +#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ +#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ +#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ +#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ +#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ +#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_FSMC ((uint8_t)0x0C) /* FSMC Alternate Function mapping */ +#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */ +#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ +#endif /* STM32F405xx || STM32F415xx */ + +/*----------------------------------------------------------------------------*/ + +/*---------------------------------------- STM32F401xx------------------------*/ +#if defined(STM32F401xC) || defined(STM32F401xE) +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ +#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ +#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ +#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ +#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3 Alternate Function mapping */ +#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ +#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ +#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ +#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */ +#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */ + + +/** + * @brief AF 10 selection + */ +#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ +#endif /* STM32F401xC || STM32F401xE */ +/*----------------------------------------------------------------------------*/ + +/*--------------- STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx-------------*/ +#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ +#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ +#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ +#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ +#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ +#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04) /* FMPI2C1 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ +#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ +#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4/I2S4 Alternate Function mapping */ +#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* I2S2 Alternate Function mapping */ +#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ +#define GPIO_AF6_SPI4 ((uint8_t)0x06) /* SPI4/I2S4 Alternate Function mapping */ +#define GPIO_AF6_SPI5 ((uint8_t)0x06) /* SPI5/I2S5 Alternate Function mapping */ +#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ +#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM1 Alternate Function mapping */ +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3/I2S3 Alternate Function mapping */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ +#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ +#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ +#define GPIO_AF8_USART3 ((uint8_t)0x08) /* USART3 Alternate Function mapping */ +#define GPIO_AF8_DFSDM1 ((uint8_t)0x08) /* DFSDM1 Alternate Function mapping */ +#define GPIO_AF8_CAN1 ((uint8_t)0x08) /* CAN1 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ +#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ +#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ +#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */ +#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */ +#define GPIO_AF9_FMPI2C1 ((uint8_t)0x09) /* FMPI2C1 Alternate Function mapping */ +#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ +#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ +#define GPIO_AF9_QSPI ((uint8_t)0x09) /* QSPI Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ +#define GPIO_AF10_DFSDM1 ((uint8_t)0x0A) /* DFSDM1 Alternate Function mapping */ +#define GPIO_AF10_QSPI ((uint8_t)0x0A) /* QSPI Alternate Function mapping */ +#define GPIO_AF10_FMC ((uint8_t)0x0A) /* FMC Alternate Function mapping */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ +#define GPIO_AF12_FSMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ +#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ + +/*----------------------------------------------------------------------------*/ + +/*--------------- STM32F413xx/STM32F423xx-------------------------------------*/ +#if defined(STM32F413xx) || defined(STM32F423xx) +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ +#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ +#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ +#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ +#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ +#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ +#define GPIO_AF3_DFSDM2 ((uint8_t)0x03) /* DFSDM2 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ +#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04) /* FMPI2C1 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ +#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ +#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4/I2S4 Alternate Function mapping */ +#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* I2S2 Alternate Function mapping */ +#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ +#define GPIO_AF6_SPI4 ((uint8_t)0x06) /* SPI4/I2S4 Alternate Function mapping */ +#define GPIO_AF6_SPI5 ((uint8_t)0x06) /* SPI5/I2S5 Alternate Function mapping */ +#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ +#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM1 Alternate Function mapping */ +#define GPIO_AF6_DFSDM2 ((uint8_t)0x06) /* DFSDM2 Alternate Function mapping */ +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3/I2S3 Alternate Function mapping */ +#define GPIO_AF7_SAI1 ((uint8_t)0x07) /* SAI1 Alternate Function mapping */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ +#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ +#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ +#define GPIO_AF7_DFSDM2 ((uint8_t)0x07) /* DFSDM2 Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ +#define GPIO_AF8_USART3 ((uint8_t)0x08) /* USART3 Alternate Function mapping */ +#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ +#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ +#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART8 Alternate Function mapping */ +#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */ +#define GPIO_AF8_DFSDM1 ((uint8_t)0x08) /* DFSDM1 Alternate Function mapping */ +#define GPIO_AF8_CAN1 ((uint8_t)0x08) /* CAN1 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ +#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ +#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ +#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */ +#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */ +#define GPIO_AF9_FMPI2C1 ((uint8_t)0x09) /* FMPI2C1 Alternate Function mapping */ +#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ +#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ +#define GPIO_AF9_QSPI ((uint8_t)0x09) /* QSPI Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#define GPIO_AF10_SAI1 ((uint8_t)0x0A) /* SAI1 Alternate Function mapping */ +#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ +#define GPIO_AF10_DFSDM1 ((uint8_t)0x0A) /* DFSDM1 Alternate Function mapping */ +#define GPIO_AF10_DFSDM2 ((uint8_t)0x0A) /* DFSDM2 Alternate Function mapping */ +#define GPIO_AF10_QSPI ((uint8_t)0x0A) /* QSPI Alternate Function mapping */ +#define GPIO_AF10_FSMC ((uint8_t)0x0A) /* FSMC Alternate Function mapping */ + +/** + * @brief AF 11 selection + */ +#define GPIO_AF11_UART4 ((uint8_t)0x0B) /* UART4 Alternate Function mapping */ +#define GPIO_AF11_UART5 ((uint8_t)0x0B) /* UART5 Alternate Function mapping */ +#define GPIO_AF11_UART9 ((uint8_t)0x0B) /* UART9 Alternate Function mapping */ +#define GPIO_AF11_UART10 ((uint8_t)0x0B) /* UART10 Alternate Function mapping */ +#define GPIO_AF11_CAN3 ((uint8_t)0x0B) /* CAN3 Alternate Function mapping */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ +#define GPIO_AF12_FSMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ + +/** + * @brief AF 14 selection + */ +#define GPIO_AF14_RNG ((uint8_t)0x0E) /* RNG Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ +#endif /* STM32F413xx || STM32F423xx */ + +/*---------------------------------------- STM32F411xx------------------------*/ +#if defined(STM32F411xE) +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ +#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ +#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ +#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ +#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ +#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ +#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* I2S2 Alternate Function mapping */ +#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ +#define GPIO_AF6_SPI4 ((uint8_t)0x06) /* SPI4/I2S4 Alternate Function mapping */ +#define GPIO_AF6_SPI5 ((uint8_t)0x06) /* SPI5/I2S5 Alternate Function mapping */ +#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3/I2S3 Alternate Function mapping */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ +#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ +#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */ +#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ +#endif /* STM32F411xE */ + +/*---------------------------------------- STM32F410xx------------------------*/ +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ +#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04) /* FMPI2C1 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */ +#if defined(STM32F410Cx) || defined(STM32F410Rx) +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ +#endif /* STM32F410Cx || STM32F410Rx */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_SPI1 ((uint8_t)0x06) /* SPI1 Alternate Function mapping */ +#if defined(STM32F410Cx) || defined(STM32F410Rx) +#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* I2S2 Alternate Function mapping */ +#endif /* STM32F410Cx || STM32F410Rx */ +#define GPIO_AF6_SPI5 ((uint8_t)0x06) /* SPI5/I2S5 Alternate Function mapping */ +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */ +#define GPIO_AF9_FMPI2C1 ((uint8_t)0x09) /* FMPI2C1 Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ +#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ + +/*---------------------------------------- STM32F446xx -----------------------*/ +#if defined(STM32F446xx) +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ +#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ +#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ +#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ +#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ +#define GPIO_AF3_CEC ((uint8_t)0x03) /* CEC Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ +#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04) /* FMPI2C1 Alternate Function mapping */ +#define GPIO_AF4_CEC ((uint8_t)0x04) /* CEC Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ +#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ +#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* SPI2/I2S2 Alternate Function mapping */ +#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ +#define GPIO_AF6_SPI4 ((uint8_t)0x06) /* SPI4 Alternate Function mapping */ +#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ +#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ +#define GPIO_AF7_UART5 ((uint8_t)0x07) /* UART5 Alternate Function mapping */ +#define GPIO_AF7_SPI2 ((uint8_t)0x07) /* SPI2/I2S2 Alternate Function mapping */ +#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3/I2S3 Alternate Function mapping */ +#define GPIO_AF7_SPDIFRX ((uint8_t)0x07) /* SPDIFRX Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ +#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ +#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ +#define GPIO_AF8_SPDIFRX ((uint8_t)0x08) /* SPDIFRX Alternate Function mapping */ +#define GPIO_AF8_SAI2 ((uint8_t)0x08) /* SAI2 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ +#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ +#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ +#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ +#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ +#define GPIO_AF9_QSPI ((uint8_t)0x09) /* QSPI Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ +#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */ +#define GPIO_AF10_SAI2 ((uint8_t)0x0A) /* SAI2 Alternate Function mapping */ +#define GPIO_AF10_QSPI ((uint8_t)0x0A) /* QSPI Alternate Function mapping */ + +/** + * @brief AF 11 selection + */ +#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ +#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */ +#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ + +/** + * @brief AF 13 selection + */ +#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ + +#endif /* STM32F446xx */ +/*----------------------------------------------------------------------------*/ + +/*-------------------------------- STM32F469xx/STM32F479xx--------------------*/ +#if defined(STM32F469xx) || defined(STM32F479xx) +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ +#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ +#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ +#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ +#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ +#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ +#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ +#define GPIO_AF5_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */ +#define GPIO_AF5_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */ +#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ +#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ +#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ +#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ +#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ +#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ +#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ +#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART7 Alternate Function mapping */ +#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ +#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ +#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ +#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ +#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ +#define GPIO_AF9_LTDC ((uint8_t)0x09) /* LCD-TFT Alternate Function mapping */ +#define GPIO_AF9_QSPI ((uint8_t)0x09) /* QSPI Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ +#define GPIO_AF10_OTG_HS ((uint8_t)0x0A) /* OTG_HS Alternate Function mapping */ +#define GPIO_AF10_QSPI ((uint8_t)0x0A) /* QSPI Alternate Function mapping */ + +/** + * @brief AF 11 selection + */ +#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ +#define GPIO_AF12_OTG_HS_FS ((uint8_t)0x0C) /* OTG HS configured in FS, Alternate Function mapping */ +#define GPIO_AF12_SDIO ((uint8_t)0x0C) /* SDIO Alternate Function mapping */ + +/** + * @brief AF 13 selection + */ +#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ +#define GPIO_AF13_DSI ((uint8_t)0x0D) /* DSI Alternate Function mapping */ + +/** + * @brief AF 14 selection + */ +#define GPIO_AF14_LTDC ((uint8_t)0x0E) /* LCD-TFT Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ + +#endif /* STM32F469xx || STM32F479xx */ +/*----------------------------------------------------------------------------*/ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Macros GPIO Exported Macros + * @{ + */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Functions GPIO Exported Functions + * @{ + */ +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup GPIOEx_Private_Constants GPIO Private Constants + * @{ + */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup GPIOEx_Private_Macros GPIO Private Macros + * @{ + */ +/** @defgroup GPIOEx_Get_Port_Index GPIO Get Port Index + * @{ + */ +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) +#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ + ((__GPIOx__) == (GPIOB))? 1U :\ + ((__GPIOx__) == (GPIOC))? 2U :\ + ((__GPIOx__) == (GPIOD))? 3U :\ + ((__GPIOx__) == (GPIOE))? 4U :\ + ((__GPIOx__) == (GPIOF))? 5U :\ + ((__GPIOx__) == (GPIOG))? 6U :\ + ((__GPIOx__) == (GPIOH))? 7U : 8U) +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ + defined(STM32F469xx) || defined(STM32F479xx) +#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ + ((__GPIOx__) == (GPIOB))? 1U :\ + ((__GPIOx__) == (GPIOC))? 2U :\ + ((__GPIOx__) == (GPIOD))? 3U :\ + ((__GPIOx__) == (GPIOE))? 4U :\ + ((__GPIOx__) == (GPIOF))? 5U :\ + ((__GPIOx__) == (GPIOG))? 6U :\ + ((__GPIOx__) == (GPIOH))? 7U :\ + ((__GPIOx__) == (GPIOI))? 8U :\ + ((__GPIOx__) == (GPIOJ))? 9U : 10U) +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ + +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) +#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ + ((__GPIOx__) == (GPIOB))? 1U :\ + ((__GPIOx__) == (GPIOC))? 2U : 7U) +#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ + +#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) +#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ + ((__GPIOx__) == (GPIOB))? 1U :\ + ((__GPIOx__) == (GPIOC))? 2U :\ + ((__GPIOx__) == (GPIOD))? 3U :\ + ((__GPIOx__) == (GPIOE))? 4U : 7U) +#endif /* STM32F401xC || STM32F401xE || STM32F411xE */ + +#if defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) +#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ + ((__GPIOx__) == (GPIOB))? 1U :\ + ((__GPIOx__) == (GPIOC))? 2U :\ + ((__GPIOx__) == (GPIOD))? 3U :\ + ((__GPIOx__) == (GPIOE))? 4U :\ + ((__GPIOx__) == (GPIOF))? 5U :\ + ((__GPIOx__) == (GPIOG))? 6U : 7U) +#endif /* STM32F446xx || STM32F412Zx || STM32F413xx || STM32F423xx */ +#if defined(STM32F412Vx) +#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ + ((__GPIOx__) == (GPIOB))? 1U :\ + ((__GPIOx__) == (GPIOC))? 2U :\ + ((__GPIOx__) == (GPIOD))? 3U :\ + ((__GPIOx__) == (GPIOE))? 4U : 7U) +#endif /* STM32F412Vx */ +#if defined(STM32F412Rx) +#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ + ((__GPIOx__) == (GPIOB))? 1U :\ + ((__GPIOx__) == (GPIOC))? 2U :\ + ((__GPIOx__) == (GPIOD))? 3U : 7U) +#endif /* STM32F412Rx */ +#if defined(STM32F412Cx) +#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ + ((__GPIOx__) == (GPIOB))? 1U :\ + ((__GPIOx__) == (GPIOC))? 2U : 7U) +#endif /* STM32F412Cx */ + +/** + * @} + */ + +/** @defgroup GPIOEx_IS_Alternat_function_selection GPIO Check Alternate Function + * @{ + */ +/*------------------------- STM32F429xx/STM32F439xx---------------------------*/ +#if defined(STM32F429xx) || defined(STM32F439xx) +#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ + ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ + ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ + ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ + ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ + ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ + ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ + ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ + ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ + ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ + ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ + ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ + ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ + ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ + ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ + ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \ + ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \ + ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \ + ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \ + ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \ + ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1) || \ + ((AF) == GPIO_AF14_LTDC)) + +#endif /* STM32F429xx || STM32F439xx */ +/*----------------------------------------------------------------------------*/ + +/*---------------------------------- STM32F427xx/STM32F437xx------------------*/ +#if defined(STM32F427xx) || defined(STM32F437xx) +#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ + ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ + ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ + ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ + ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ + ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ + ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ + ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ + ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ + ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ + ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ + ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ + ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ + ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ + ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ + ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \ + ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \ + ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \ + ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \ + ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \ + ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1)) + +#endif /* STM32F427xx || STM32F437xx */ +/*----------------------------------------------------------------------------*/ + +/*---------------------------------- STM32F407xx/STM32F417xx------------------*/ +#if defined(STM32F407xx) || defined(STM32F417xx) +#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ + ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ + ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ + ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ + ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ + ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ + ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ + ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ + ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ + ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ + ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ + ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ + ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ + ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ + ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ + ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \ + ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \ + ((AF) == GPIO_AF12_FSMC) || ((AF) == GPIO_AF15_EVENTOUT)) + +#endif /* STM32F407xx || STM32F417xx */ +/*----------------------------------------------------------------------------*/ + +/*---------------------------------- STM32F405xx/STM32F415xx------------------*/ +#if defined(STM32F405xx) || defined(STM32F415xx) +#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ + ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ + ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ + ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ + ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ + ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ + ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ + ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ + ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ + ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ + ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ + ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ + ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ + ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ + ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ + ((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDIO) || \ + ((AF) == GPIO_AF12_FSMC) || ((AF) == GPIO_AF15_EVENTOUT)) + +#endif /* STM32F405xx || STM32F415xx */ + +/*----------------------------------------------------------------------------*/ + +/*---------------------------------------- STM32F401xx------------------------*/ +#if defined(STM32F401xC) || defined(STM32F401xE) +#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF12_SDIO) || \ + ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ + ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ + ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ + ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ + ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM9) || \ + ((AF) == GPIO_AF3_TIM10) || ((AF) == GPIO_AF3_TIM11) || \ + ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ + ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ + ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF5_SPI4) || \ + ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF7_USART1) || \ + ((AF) == GPIO_AF7_USART2) || ((AF) == GPIO_AF8_USART6) || \ + ((AF) == GPIO_AF9_I2C2) || ((AF) == GPIO_AF9_I2C3) || \ + ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF15_EVENTOUT)) +#endif /* STM32F401xC || STM32F401xE */ +/*----------------------------------------------------------------------------*/ +/*---------------------------------------- STM32F410xx------------------------*/ +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) +#define IS_GPIO_AF(AF) (((AF) < 10U) || ((AF) == 15U)) +#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ + +/*---------------------------------------- STM32F411xx------------------------*/ +#if defined(STM32F411xE) +#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ + ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ + ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ + ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ + ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ + ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF4_I2C1) || \ + ((AF) == GPIO_AF4_I2C2) || ((AF) == GPIO_AF4_I2C3) || \ + ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \ + ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF6_SPI4) || \ + ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF5_SPI4) || \ + ((AF) == GPIO_AF6_SPI5) || ((AF) == GPIO_AF7_SPI3) || \ + ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ + ((AF) == GPIO_AF8_USART6) || ((AF) == GPIO_AF10_OTG_FS) || \ + ((AF) == GPIO_AF9_I2C2) || ((AF) == GPIO_AF9_I2C3) || \ + ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF15_EVENTOUT)) + +#endif /* STM32F411xE */ +/*----------------------------------------------------------------------------*/ + +/*----------------------------------------------- STM32F446xx ----------------*/ +#if defined(STM32F446xx) +#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ + ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ + ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ + ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ + ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ + ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ + ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ + ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ + ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ + ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ + ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ + ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ + ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ + ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ + ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ + ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \ + ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \ + ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \ + ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1) || \ + ((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \ + ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF6_SPI2) || \ + ((AF) == GPIO_AF6_SPI4) || ((AF) == GPIO_AF7_UART5) || \ + ((AF) == GPIO_AF7_SPI2) || ((AF) == GPIO_AF7_SPI3) || \ + ((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \ + ((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF9_QSPI) || \ + ((AF) == GPIO_AF10_SAI2) || ((AF) == GPIO_AF10_QSPI)) + +#endif /* STM32F446xx */ +/*----------------------------------------------------------------------------*/ + +/*------------------------------------------- STM32F469xx/STM32F479xx --------*/ +#if defined(STM32F469xx) || defined(STM32F479xx) +#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ + ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ + ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ + ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ + ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ + ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ + ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ + ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ + ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ + ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ + ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ + ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ + ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ + ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ + ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ + ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \ + ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \ + ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \ + ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \ + ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \ + ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1) || \ + ((AF) == GPIO_AF14_LTDC) || ((AF) == GPIO_AF13_DSI) || \ + ((AF) == GPIO_AF9_QSPI) || ((AF) == GPIO_AF10_QSPI)) + +#endif /* STM32F469xx || STM32F479xx */ +/*----------------------------------------------------------------------------*/ + +/*------------------STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx-----------*/ +#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) +#define IS_GPIO_AF(AF) (((AF) < 16U) && ((AF) != 11U) && ((AF) != 14U) && ((AF) != 13U)) +#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ +/*----------------------------------------------------------------------------*/ + +/*------------------STM32F413xx/STM32F423xx-----------------------------------*/ +#if defined(STM32F413xx) || defined(STM32F423xx) +#define IS_GPIO_AF(AF) (((AF) < 16U) && ((AF) != 13U)) +#endif /* STM32F413xx || STM32F423xx */ +/*----------------------------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup GPIOEx_Private_Functions GPIO Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_GPIO_EX_H */ + diff --git a/Drivers/stm32f4xx_hal_pcd.c b/libs/hal/stm32f4xx_hal_pcd.c similarity index 96% rename from Drivers/stm32f4xx_hal_pcd.c rename to libs/hal/stm32f4xx_hal_pcd.c index c8649ca..7e46592 100644 --- a/Drivers/stm32f4xx_hal_pcd.c +++ b/libs/hal/stm32f4xx_hal_pcd.c @@ -1,2387 +1,2387 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_pcd.c - * @author MCD Application Team - * @brief PCD HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the USB Peripheral Controller: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral Control functions - * + Peripheral State functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The PCD HAL driver can be used as follows: - - (#) Declare a PCD_HandleTypeDef handle structure, for example: - PCD_HandleTypeDef hpcd; - - (#) Fill parameters of Init structure in HCD handle - - (#) Call HAL_PCD_Init() API to initialize the PCD peripheral (Core, Device core, ...) - - (#) Initialize the PCD low level resources through the HAL_PCD_MspInit() API: - (##) Enable the PCD/USB Low Level interface clock using - (+++) __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); - (+++) __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); (For High Speed Mode) - - (##) Initialize the related GPIO clocks - (##) Configure PCD pin-out - (##) Configure PCD NVIC interrupt - - (#)Associate the Upper USB device stack to the HAL PCD Driver: - (##) hpcd.pData = pdev; - - (#)Enable PCD transmission and reception: - (##) HAL_PCD_Start(); - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup PCD PCD - * @brief PCD HAL module driver - * @{ - */ - -#ifdef HAL_PCD_MODULE_ENABLED - -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @defgroup PCD_Private_Macros PCD Private Macros - * @{ - */ -#define PCD_MIN(a, b) (((a) < (b)) ? (a) : (b)) -#define PCD_MAX(a, b) (((a) > (b)) ? (a) : (b)) -/** - * @} - */ - -/* Private functions prototypes ----------------------------------------------*/ -/** @defgroup PCD_Private_Functions PCD Private Functions - * @{ - */ -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum); -static HAL_StatusTypeDef PCD_EP_OutXfrComplete_int(PCD_HandleTypeDef *hpcd, uint32_t epnum); -static HAL_StatusTypeDef PCD_EP_OutSetupPacket_int(PCD_HandleTypeDef *hpcd, uint32_t epnum); -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup PCD_Exported_Functions PCD Exported Functions - * @{ - */ - -/** @defgroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This section provides functions allowing to: - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the PCD according to the specified - * parameters in the PCD_InitTypeDef and initialize the associated handle. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd) -{ - USB_OTG_GlobalTypeDef *USBx; - uint8_t i; - - /* Check the PCD handle allocation */ - if (hpcd == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_PCD_ALL_INSTANCE(hpcd->Instance)); - - USBx = hpcd->Instance; - - if (hpcd->State == HAL_PCD_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hpcd->Lock = HAL_UNLOCKED; - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->SOFCallback = HAL_PCD_SOFCallback; - hpcd->SetupStageCallback = HAL_PCD_SetupStageCallback; - hpcd->ResetCallback = HAL_PCD_ResetCallback; - hpcd->SuspendCallback = HAL_PCD_SuspendCallback; - hpcd->ResumeCallback = HAL_PCD_ResumeCallback; - hpcd->ConnectCallback = HAL_PCD_ConnectCallback; - hpcd->DisconnectCallback = HAL_PCD_DisconnectCallback; - hpcd->DataOutStageCallback = HAL_PCD_DataOutStageCallback; - hpcd->DataInStageCallback = HAL_PCD_DataInStageCallback; - hpcd->ISOOUTIncompleteCallback = HAL_PCD_ISOOUTIncompleteCallback; - hpcd->ISOINIncompleteCallback = HAL_PCD_ISOINIncompleteCallback; - hpcd->LPMCallback = HAL_PCDEx_LPM_Callback; - hpcd->BCDCallback = HAL_PCDEx_BCD_Callback; - - if (hpcd->MspInitCallback == NULL) - { - hpcd->MspInitCallback = HAL_PCD_MspInit; - } - - /* Init the low level hardware */ - hpcd->MspInitCallback(hpcd); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC... */ - HAL_PCD_MspInit(hpcd); -#endif /* (USE_HAL_PCD_REGISTER_CALLBACKS) */ - } - - hpcd->State = HAL_PCD_STATE_BUSY; - - /* Disable DMA mode for FS instance */ - if ((USBx->CID & (0x1U << 8)) == 0U) - { - hpcd->Init.dma_enable = 0U; - } - - /* Disable the Interrupts */ - __HAL_PCD_DISABLE(hpcd); - - /*Init the Core (common init.) */ - if (USB_CoreInit(hpcd->Instance, hpcd->Init) != HAL_OK) - { - hpcd->State = HAL_PCD_STATE_ERROR; - return HAL_ERROR; - } - - /* Force Device Mode*/ - (void)USB_SetCurrentMode(hpcd->Instance, USB_DEVICE_MODE); - - /* Init endpoints structures */ - for (i = 0U; i < hpcd->Init.dev_endpoints; i++) - { - /* Init ep structure */ - hpcd->IN_ep[i].is_in = 1U; - hpcd->IN_ep[i].num = i; - hpcd->IN_ep[i].tx_fifo_num = i; - /* Control until ep is activated */ - hpcd->IN_ep[i].type = EP_TYPE_CTRL; - hpcd->IN_ep[i].maxpacket = 0U; - hpcd->IN_ep[i].xfer_buff = 0U; - hpcd->IN_ep[i].xfer_len = 0U; - } - - for (i = 0U; i < hpcd->Init.dev_endpoints; i++) - { - hpcd->OUT_ep[i].is_in = 0U; - hpcd->OUT_ep[i].num = i; - /* Control until ep is activated */ - hpcd->OUT_ep[i].type = EP_TYPE_CTRL; - hpcd->OUT_ep[i].maxpacket = 0U; - hpcd->OUT_ep[i].xfer_buff = 0U; - hpcd->OUT_ep[i].xfer_len = 0U; - } - - /* Init Device */ - if (USB_DevInit(hpcd->Instance, hpcd->Init) != HAL_OK) - { - hpcd->State = HAL_PCD_STATE_ERROR; - return HAL_ERROR; - } - - hpcd->USB_Address = 0U; - hpcd->State = HAL_PCD_STATE_READY; -#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - /* Activate LPM */ - if (hpcd->Init.lpm_enable == 1U) - { - (void)HAL_PCDEx_ActivateLPM(hpcd); - } -#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ - (void)USB_DevDisconnect(hpcd->Instance); - - return HAL_OK; -} - -/** - * @brief DeInitializes the PCD peripheral. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd) -{ - /* Check the PCD handle allocation */ - if (hpcd == NULL) - { - return HAL_ERROR; - } - - hpcd->State = HAL_PCD_STATE_BUSY; - - /* Stop Device */ - if (USB_StopDevice(hpcd->Instance) != HAL_OK) - { - return HAL_ERROR; - } - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - if (hpcd->MspDeInitCallback == NULL) - { - hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; /* Legacy weak MspDeInit */ - } - - /* DeInit the low level hardware */ - hpcd->MspDeInitCallback(hpcd); -#else - /* DeInit the low level hardware: CLOCK, NVIC.*/ - HAL_PCD_MspDeInit(hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - - hpcd->State = HAL_PCD_STATE_RESET; - - return HAL_OK; -} - -/** - * @brief Initializes the PCD MSP. - * @param hpcd PCD handle - * @retval None - */ -__weak void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes PCD MSP. - * @param hpcd PCD handle - * @retval None - */ -__weak void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_MspDeInit could be implemented in the user file - */ -} - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) -/** - * @brief Register a User USB PCD Callback - * To be used instead of the weak predefined callback - * @param hpcd USB PCD handle - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_PCD_SOF_CB_ID USB PCD SOF callback ID - * @arg @ref HAL_PCD_SETUPSTAGE_CB_ID USB PCD Setup callback ID - * @arg @ref HAL_PCD_RESET_CB_ID USB PCD Reset callback ID - * @arg @ref HAL_PCD_SUSPEND_CB_ID USB PCD Suspend callback ID - * @arg @ref HAL_PCD_RESUME_CB_ID USB PCD Resume callback ID - * @arg @ref HAL_PCD_CONNECT_CB_ID USB PCD Connect callback ID - * @arg @ref HAL_PCD_DISCONNECT_CB_ID OTG PCD Disconnect callback ID - * @arg @ref HAL_PCD_MSPINIT_CB_ID MspDeInit callback ID - * @arg @ref HAL_PCD_MSPDEINIT_CB_ID MspDeInit callback ID - * @param pCallback pointer to the Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, - HAL_PCD_CallbackIDTypeDef CallbackID, - pPCD_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - switch (CallbackID) - { - case HAL_PCD_SOF_CB_ID : - hpcd->SOFCallback = pCallback; - break; - - case HAL_PCD_SETUPSTAGE_CB_ID : - hpcd->SetupStageCallback = pCallback; - break; - - case HAL_PCD_RESET_CB_ID : - hpcd->ResetCallback = pCallback; - break; - - case HAL_PCD_SUSPEND_CB_ID : - hpcd->SuspendCallback = pCallback; - break; - - case HAL_PCD_RESUME_CB_ID : - hpcd->ResumeCallback = pCallback; - break; - - case HAL_PCD_CONNECT_CB_ID : - hpcd->ConnectCallback = pCallback; - break; - - case HAL_PCD_DISCONNECT_CB_ID : - hpcd->DisconnectCallback = pCallback; - break; - - case HAL_PCD_MSPINIT_CB_ID : - hpcd->MspInitCallback = pCallback; - break; - - case HAL_PCD_MSPDEINIT_CB_ID : - hpcd->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (hpcd->State == HAL_PCD_STATE_RESET) - { - switch (CallbackID) - { - case HAL_PCD_MSPINIT_CB_ID : - hpcd->MspInitCallback = pCallback; - break; - - case HAL_PCD_MSPDEINIT_CB_ID : - hpcd->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - return status; -} - -/** - * @brief Unregister an USB PCD Callback - * USB PCD callback is redirected to the weak predefined callback - * @param hpcd USB PCD handle - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg @ref HAL_PCD_SOF_CB_ID USB PCD SOF callback ID - * @arg @ref HAL_PCD_SETUPSTAGE_CB_ID USB PCD Setup callback ID - * @arg @ref HAL_PCD_RESET_CB_ID USB PCD Reset callback ID - * @arg @ref HAL_PCD_SUSPEND_CB_ID USB PCD Suspend callback ID - * @arg @ref HAL_PCD_RESUME_CB_ID USB PCD Resume callback ID - * @arg @ref HAL_PCD_CONNECT_CB_ID USB PCD Connect callback ID - * @arg @ref HAL_PCD_DISCONNECT_CB_ID OTG PCD Disconnect callback ID - * @arg @ref HAL_PCD_MSPINIT_CB_ID MspDeInit callback ID - * @arg @ref HAL_PCD_MSPDEINIT_CB_ID MspDeInit callback ID - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hpcd); - - /* Setup Legacy weak Callbacks */ - if (hpcd->State == HAL_PCD_STATE_READY) - { - switch (CallbackID) - { - case HAL_PCD_SOF_CB_ID : - hpcd->SOFCallback = HAL_PCD_SOFCallback; - break; - - case HAL_PCD_SETUPSTAGE_CB_ID : - hpcd->SetupStageCallback = HAL_PCD_SetupStageCallback; - break; - - case HAL_PCD_RESET_CB_ID : - hpcd->ResetCallback = HAL_PCD_ResetCallback; - break; - - case HAL_PCD_SUSPEND_CB_ID : - hpcd->SuspendCallback = HAL_PCD_SuspendCallback; - break; - - case HAL_PCD_RESUME_CB_ID : - hpcd->ResumeCallback = HAL_PCD_ResumeCallback; - break; - - case HAL_PCD_CONNECT_CB_ID : - hpcd->ConnectCallback = HAL_PCD_ConnectCallback; - break; - - case HAL_PCD_DISCONNECT_CB_ID : - hpcd->DisconnectCallback = HAL_PCD_DisconnectCallback; - break; - - case HAL_PCD_MSPINIT_CB_ID : - hpcd->MspInitCallback = HAL_PCD_MspInit; - break; - - case HAL_PCD_MSPDEINIT_CB_ID : - hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; - break; - - default : - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (hpcd->State == HAL_PCD_STATE_RESET) - { - switch (CallbackID) - { - case HAL_PCD_MSPINIT_CB_ID : - hpcd->MspInitCallback = HAL_PCD_MspInit; - break; - - case HAL_PCD_MSPDEINIT_CB_ID : - hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; - break; - - default : - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - return status; -} - -/** - * @brief Register USB PCD Data OUT Stage Callback - * To be used instead of the weak HAL_PCD_DataOutStageCallback() predefined callback - * @param hpcd PCD handle - * @param pCallback pointer to the USB PCD Data OUT Stage Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, - pPCD_DataOutStageCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->DataOutStageCallback = pCallback; - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Unregister the USB PCD Data OUT Stage Callback - * USB PCD Data OUT Stage Callback is redirected to the weak HAL_PCD_DataOutStageCallback() predefined callback - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->DataOutStageCallback = HAL_PCD_DataOutStageCallback; /* Legacy weak DataOutStageCallback */ - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Register USB PCD Data IN Stage Callback - * To be used instead of the weak HAL_PCD_DataInStageCallback() predefined callback - * @param hpcd PCD handle - * @param pCallback pointer to the USB PCD Data IN Stage Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, - pPCD_DataInStageCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->DataInStageCallback = pCallback; - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Unregister the USB PCD Data IN Stage Callback - * USB PCD Data OUT Stage Callback is redirected to the weak HAL_PCD_DataInStageCallback() predefined callback - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->DataInStageCallback = HAL_PCD_DataInStageCallback; /* Legacy weak DataInStageCallback */ - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Register USB PCD Iso OUT incomplete Callback - * To be used instead of the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback - * @param hpcd PCD handle - * @param pCallback pointer to the USB PCD Iso OUT incomplete Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, - pPCD_IsoOutIncpltCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->ISOOUTIncompleteCallback = pCallback; - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Unregister the USB PCD Iso OUT incomplete Callback - * USB PCD Iso OUT incomplete Callback is redirected - * to the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->ISOOUTIncompleteCallback = HAL_PCD_ISOOUTIncompleteCallback; /* Legacy weak ISOOUTIncompleteCallback */ - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Register USB PCD Iso IN incomplete Callback - * To be used instead of the weak HAL_PCD_ISOINIncompleteCallback() predefined callback - * @param hpcd PCD handle - * @param pCallback pointer to the USB PCD Iso IN incomplete Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, - pPCD_IsoInIncpltCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->ISOINIncompleteCallback = pCallback; - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Unregister the USB PCD Iso IN incomplete Callback - * USB PCD Iso IN incomplete Callback is redirected - * to the weak HAL_PCD_ISOINIncompleteCallback() predefined callback - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->ISOINIncompleteCallback = HAL_PCD_ISOINIncompleteCallback; /* Legacy weak ISOINIncompleteCallback */ - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Register USB PCD BCD Callback - * To be used instead of the weak HAL_PCDEx_BCD_Callback() predefined callback - * @param hpcd PCD handle - * @param pCallback pointer to the USB PCD BCD Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, pPCD_BcdCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->BCDCallback = pCallback; - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Unregister the USB PCD BCD Callback - * USB BCD Callback is redirected to the weak HAL_PCDEx_BCD_Callback() predefined callback - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->BCDCallback = HAL_PCDEx_BCD_Callback; /* Legacy weak HAL_PCDEx_BCD_Callback */ - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Register USB PCD LPM Callback - * To be used instead of the weak HAL_PCDEx_LPM_Callback() predefined callback - * @param hpcd PCD handle - * @param pCallback pointer to the USB PCD LPM Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, pPCD_LpmCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->LPMCallback = pCallback; - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Unregister the USB PCD LPM Callback - * USB LPM Callback is redirected to the weak HAL_PCDEx_LPM_Callback() predefined callback - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->LPMCallback = HAL_PCDEx_LPM_Callback; /* Legacy weak HAL_PCDEx_LPM_Callback */ - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup PCD_Exported_Functions_Group2 Input and Output operation functions - * @brief Data transfers functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the PCD data - transfers. - -@endverbatim - * @{ - */ - -/** - * @brief Start the USB device - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd) -{ - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - - __HAL_LOCK(hpcd); - - if ((hpcd->Init.battery_charging_enable == 1U) && - (hpcd->Init.phy_itface != USB_OTG_ULPI_PHY)) - { - /* Enable USB Transceiver */ - USBx->GCCFG |= USB_OTG_GCCFG_PWRDWN; - } - - __HAL_PCD_ENABLE(hpcd); - (void)USB_DevConnect(hpcd->Instance); - __HAL_UNLOCK(hpcd); - - return HAL_OK; -} - -/** - * @brief Stop the USB device. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd) -{ - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - - __HAL_LOCK(hpcd); - __HAL_PCD_DISABLE(hpcd); - (void)USB_DevDisconnect(hpcd->Instance); - - (void)USB_FlushTxFifo(hpcd->Instance, 0x10U); - - if ((hpcd->Init.battery_charging_enable == 1U) && - (hpcd->Init.phy_itface != USB_OTG_ULPI_PHY)) - { - /* Disable USB Transceiver */ - USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); - } - - __HAL_UNLOCK(hpcd); - - return HAL_OK; -} - -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -/** - * @brief Handles PCD interrupt request. - * @param hpcd PCD handle - * @retval HAL status - */ -void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) -{ - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - uint32_t USBx_BASE = (uint32_t)USBx; - USB_OTG_EPTypeDef *ep; - uint32_t i; - uint32_t ep_intr; - uint32_t epint; - uint32_t epnum; - uint32_t fifoemptymsk; - uint32_t RegVal; - - /* ensure that we are in device mode */ - if (USB_GetMode(hpcd->Instance) == USB_OTG_MODE_DEVICE) - { - /* avoid spurious interrupt */ - if (__HAL_PCD_IS_INVALID_INTERRUPT(hpcd)) - { - return; - } - - /* store current frame number */ - hpcd->FrameNumber = (USBx_DEVICE->DSTS & USB_OTG_DSTS_FNSOF_Msk) >> USB_OTG_DSTS_FNSOF_Pos; - - if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_MMIS)) - { - /* incorrect mode, acknowledge the interrupt */ - __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_MMIS); - } - - /* Handle RxQLevel Interrupt */ - if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_RXFLVL)) - { - USB_MASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL); - - RegVal = USBx->GRXSTSP; - - ep = &hpcd->OUT_ep[RegVal & USB_OTG_GRXSTSP_EPNUM]; - - if (((RegVal & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_DATA_UPDT) - { - if ((RegVal & USB_OTG_GRXSTSP_BCNT) != 0U) - { - (void)USB_ReadPacket(USBx, ep->xfer_buff, - (uint16_t)((RegVal & USB_OTG_GRXSTSP_BCNT) >> 4)); - - ep->xfer_buff += (RegVal & USB_OTG_GRXSTSP_BCNT) >> 4; - ep->xfer_count += (RegVal & USB_OTG_GRXSTSP_BCNT) >> 4; - } - } - else if (((RegVal & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_SETUP_UPDT) - { - (void)USB_ReadPacket(USBx, (uint8_t *)hpcd->Setup, 8U); - ep->xfer_count += (RegVal & USB_OTG_GRXSTSP_BCNT) >> 4; - } - else - { - /* ... */ - } - - USB_UNMASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL); - } - - if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OEPINT)) - { - epnum = 0U; - - /* Read in the device interrupt bits */ - ep_intr = USB_ReadDevAllOutEpInterrupt(hpcd->Instance); - - while (ep_intr != 0U) - { - if ((ep_intr & 0x1U) != 0U) - { - epint = USB_ReadDevOutEPInterrupt(hpcd->Instance, (uint8_t)epnum); - - if ((epint & USB_OTG_DOEPINT_XFRC) == USB_OTG_DOEPINT_XFRC) - { - CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_XFRC); - (void)PCD_EP_OutXfrComplete_int(hpcd, epnum); - } - - if ((epint & USB_OTG_DOEPINT_STUP) == USB_OTG_DOEPINT_STUP) - { - CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STUP); - /* Class B setup phase done for previous decoded setup */ - (void)PCD_EP_OutSetupPacket_int(hpcd, epnum); - } - - if ((epint & USB_OTG_DOEPINT_OTEPDIS) == USB_OTG_DOEPINT_OTEPDIS) - { - CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPDIS); - } - - /* Clear OUT Endpoint disable interrupt */ - if ((epint & USB_OTG_DOEPINT_EPDISD) == USB_OTG_DOEPINT_EPDISD) - { - if ((USBx->GINTSTS & USB_OTG_GINTSTS_BOUTNAKEFF) == USB_OTG_GINTSTS_BOUTNAKEFF) - { - USBx_DEVICE->DCTL |= USB_OTG_DCTL_CGONAK; - } - - ep = &hpcd->OUT_ep[epnum]; - - if (ep->is_iso_incomplete == 1U) - { - ep->is_iso_incomplete = 0U; - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->ISOOUTIncompleteCallback(hpcd, (uint8_t)epnum); -#else - HAL_PCD_ISOOUTIncompleteCallback(hpcd, (uint8_t)epnum); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - - CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_EPDISD); - } - - /* Clear Status Phase Received interrupt */ - if ((epint & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR) - { - CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPSPR); - } - - /* Clear OUT NAK interrupt */ - if ((epint & USB_OTG_DOEPINT_NAK) == USB_OTG_DOEPINT_NAK) - { - CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_NAK); - } - } - epnum++; - ep_intr >>= 1U; - } - } - - if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IEPINT)) - { - /* Read in the device interrupt bits */ - ep_intr = USB_ReadDevAllInEpInterrupt(hpcd->Instance); - - epnum = 0U; - - while (ep_intr != 0U) - { - if ((ep_intr & 0x1U) != 0U) /* In ITR */ - { - epint = USB_ReadDevInEPInterrupt(hpcd->Instance, (uint8_t)epnum); - - if ((epint & USB_OTG_DIEPINT_XFRC) == USB_OTG_DIEPINT_XFRC) - { - fifoemptymsk = (uint32_t)(0x1UL << (epnum & EP_ADDR_MSK)); - USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk; - - CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_XFRC); - - if (hpcd->Init.dma_enable == 1U) - { - hpcd->IN_ep[epnum].xfer_buff += hpcd->IN_ep[epnum].maxpacket; - - /* this is ZLP, so prepare EP0 for next setup */ - if ((epnum == 0U) && (hpcd->IN_ep[epnum].xfer_len == 0U)) - { - /* prepare to rx more setup packets */ - (void)USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup); - } - } - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->DataInStageCallback(hpcd, (uint8_t)epnum); -#else - HAL_PCD_DataInStageCallback(hpcd, (uint8_t)epnum); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - if ((epint & USB_OTG_DIEPINT_TOC) == USB_OTG_DIEPINT_TOC) - { - CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_TOC); - } - if ((epint & USB_OTG_DIEPINT_ITTXFE) == USB_OTG_DIEPINT_ITTXFE) - { - CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_ITTXFE); - } - if ((epint & USB_OTG_DIEPINT_INEPNE) == USB_OTG_DIEPINT_INEPNE) - { - CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_INEPNE); - } - if ((epint & USB_OTG_DIEPINT_EPDISD) == USB_OTG_DIEPINT_EPDISD) - { - (void)USB_FlushTxFifo(USBx, epnum); - - ep = &hpcd->IN_ep[epnum]; - - if (ep->is_iso_incomplete == 1U) - { - ep->is_iso_incomplete = 0U; - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->ISOINIncompleteCallback(hpcd, (uint8_t)epnum); -#else - HAL_PCD_ISOINIncompleteCallback(hpcd, (uint8_t)epnum); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - - CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_EPDISD); - } - if ((epint & USB_OTG_DIEPINT_TXFE) == USB_OTG_DIEPINT_TXFE) - { - (void)PCD_WriteEmptyTxFifo(hpcd, epnum); - } - } - epnum++; - ep_intr >>= 1U; - } - } - - /* Handle Resume Interrupt */ - if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT)) - { - /* Clear the Remote Wake-up Signaling */ - USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG; - - if (hpcd->LPM_State == LPM_L1) - { - hpcd->LPM_State = LPM_L0; - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->LPMCallback(hpcd, PCD_LPM_L0_ACTIVE); -#else - HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L0_ACTIVE); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - else - { -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->ResumeCallback(hpcd); -#else - HAL_PCD_ResumeCallback(hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - - __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT); - } - - /* Handle Suspend Interrupt */ - if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP)) - { - if ((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS) - { -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->SuspendCallback(hpcd); -#else - HAL_PCD_SuspendCallback(hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP); - } -#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - /* Handle LPM Interrupt */ - if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_LPMINT)) - { - __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_LPMINT); - - if (hpcd->LPM_State == LPM_L0) - { - hpcd->LPM_State = LPM_L1; - hpcd->BESL = (hpcd->Instance->GLPMCFG & USB_OTG_GLPMCFG_BESL) >> 2U; - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->LPMCallback(hpcd, PCD_LPM_L1_ACTIVE); -#else - HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L1_ACTIVE); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - else - { -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->SuspendCallback(hpcd); -#else - HAL_PCD_SuspendCallback(hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - } -#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ - /* Handle Reset Interrupt */ - if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBRST)) - { - USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG; - (void)USB_FlushTxFifo(hpcd->Instance, 0x10U); - - for (i = 0U; i < hpcd->Init.dev_endpoints; i++) - { - USBx_INEP(i)->DIEPINT = 0xFB7FU; - USBx_INEP(i)->DIEPCTL &= ~USB_OTG_DIEPCTL_STALL; - USBx_OUTEP(i)->DOEPINT = 0xFB7FU; - USBx_OUTEP(i)->DOEPCTL &= ~USB_OTG_DOEPCTL_STALL; - USBx_OUTEP(i)->DOEPCTL |= USB_OTG_DOEPCTL_SNAK; - } - USBx_DEVICE->DAINTMSK |= 0x10001U; - - if (hpcd->Init.use_dedicated_ep1 != 0U) - { - USBx_DEVICE->DOUTEP1MSK |= USB_OTG_DOEPMSK_STUPM | - USB_OTG_DOEPMSK_XFRCM | - USB_OTG_DOEPMSK_EPDM; - - USBx_DEVICE->DINEP1MSK |= USB_OTG_DIEPMSK_TOM | - USB_OTG_DIEPMSK_XFRCM | - USB_OTG_DIEPMSK_EPDM; - } - else - { - USBx_DEVICE->DOEPMSK |= USB_OTG_DOEPMSK_STUPM | - USB_OTG_DOEPMSK_XFRCM | - USB_OTG_DOEPMSK_EPDM | - USB_OTG_DOEPMSK_OTEPSPRM | - USB_OTG_DOEPMSK_NAKM; - - USBx_DEVICE->DIEPMSK |= USB_OTG_DIEPMSK_TOM | - USB_OTG_DIEPMSK_XFRCM | - USB_OTG_DIEPMSK_EPDM; - } - - /* Set Default Address to 0 */ - USBx_DEVICE->DCFG &= ~USB_OTG_DCFG_DAD; - - /* setup EP0 to receive SETUP packets */ - (void)USB_EP0_OutStart(hpcd->Instance, (uint8_t)hpcd->Init.dma_enable, - (uint8_t *)hpcd->Setup); - - __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBRST); - } - - /* Handle Enumeration done Interrupt */ - if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE)) - { - (void)USB_ActivateSetup(hpcd->Instance); - hpcd->Init.speed = USB_GetDevSpeed(hpcd->Instance); - - /* Set USB Turnaround time */ - (void)USB_SetTurnaroundTime(hpcd->Instance, - HAL_RCC_GetHCLKFreq(), - (uint8_t)hpcd->Init.speed); - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->ResetCallback(hpcd); -#else - HAL_PCD_ResetCallback(hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - - __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE); - } - - /* Handle SOF Interrupt */ - if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SOF)) - { -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->SOFCallback(hpcd); -#else - HAL_PCD_SOFCallback(hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - - __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SOF); - } - - /* Handle Global OUT NAK effective Interrupt */ - if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_BOUTNAKEFF)) - { - USBx->GINTMSK &= ~USB_OTG_GINTMSK_GONAKEFFM; - - for (epnum = 1U; epnum < hpcd->Init.dev_endpoints; epnum++) - { - if (hpcd->OUT_ep[epnum].is_iso_incomplete == 1U) - { - /* Abort current transaction and disable the EP */ - (void)HAL_PCD_EP_Abort(hpcd, (uint8_t)epnum); - } - } - } - - /* Handle Incomplete ISO IN Interrupt */ - if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR)) - { - for (epnum = 1U; epnum < hpcd->Init.dev_endpoints; epnum++) - { - RegVal = USBx_INEP(epnum)->DIEPCTL; - - if ((hpcd->IN_ep[epnum].type == EP_TYPE_ISOC) && - ((RegVal & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA)) - { - hpcd->IN_ep[epnum].is_iso_incomplete = 1U; - - /* Abort current transaction and disable the EP */ - (void)HAL_PCD_EP_Abort(hpcd, (uint8_t)(epnum | 0x80U)); - } - } - - __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR); - } - - /* Handle Incomplete ISO OUT Interrupt */ - if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT)) - { - for (epnum = 1U; epnum < hpcd->Init.dev_endpoints; epnum++) - { - RegVal = USBx_OUTEP(epnum)->DOEPCTL; - - if ((hpcd->OUT_ep[epnum].type == EP_TYPE_ISOC) && - ((RegVal & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) && - ((RegVal & (0x1U << 16)) == (hpcd->FrameNumber & 0x1U))) - { - hpcd->OUT_ep[epnum].is_iso_incomplete = 1U; - - USBx->GINTMSK |= USB_OTG_GINTMSK_GONAKEFFM; - - if ((USBx->GINTSTS & USB_OTG_GINTSTS_BOUTNAKEFF) == 0U) - { - USBx_DEVICE->DCTL |= USB_OTG_DCTL_SGONAK; - break; - } - } - } - - __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT); - } - - /* Handle Connection event Interrupt */ - if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT)) - { -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->ConnectCallback(hpcd); -#else - HAL_PCD_ConnectCallback(hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - - __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT); - } - - /* Handle Disconnection event Interrupt */ - if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OTGINT)) - { - RegVal = hpcd->Instance->GOTGINT; - - if ((RegVal & USB_OTG_GOTGINT_SEDET) == USB_OTG_GOTGINT_SEDET) - { -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->DisconnectCallback(hpcd); -#else - HAL_PCD_DisconnectCallback(hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - hpcd->Instance->GOTGINT |= RegVal; - } - } -} - - -/** - * @brief Handles PCD Wakeup interrupt request. - * @param hpcd PCD handle - * @retval HAL status - */ -void HAL_PCD_WKUP_IRQHandler(PCD_HandleTypeDef *hpcd) -{ - USB_OTG_GlobalTypeDef *USBx; - - USBx = hpcd->Instance; - - if ((USBx->CID & (0x1U << 8)) == 0U) - { - /* Clear EXTI pending Bit */ - __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG(); - } - else - { - /* Clear EXTI pending Bit */ - __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG(); - } -} -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - - -/** - * @brief Data OUT stage callback. - * @param hpcd PCD handle - * @param epnum endpoint number - * @retval None - */ -__weak void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(epnum); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_DataOutStageCallback could be implemented in the user file - */ -} - -/** - * @brief Data IN stage callback - * @param hpcd PCD handle - * @param epnum endpoint number - * @retval None - */ -__weak void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(epnum); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_DataInStageCallback could be implemented in the user file - */ -} -/** - * @brief Setup stage callback - * @param hpcd PCD handle - * @retval None - */ -__weak void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_SetupStageCallback could be implemented in the user file - */ -} - -/** - * @brief USB Start Of Frame callback. - * @param hpcd PCD handle - * @retval None - */ -__weak void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_SOFCallback could be implemented in the user file - */ -} - -/** - * @brief USB Reset callback. - * @param hpcd PCD handle - * @retval None - */ -__weak void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_ResetCallback could be implemented in the user file - */ -} - -/** - * @brief Suspend event callback. - * @param hpcd PCD handle - * @retval None - */ -__weak void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_SuspendCallback could be implemented in the user file - */ -} - -/** - * @brief Resume event callback. - * @param hpcd PCD handle - * @retval None - */ -__weak void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_ResumeCallback could be implemented in the user file - */ -} - -/** - * @brief Incomplete ISO OUT callback. - * @param hpcd PCD handle - * @param epnum endpoint number - * @retval None - */ -__weak void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(epnum); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_ISOOUTIncompleteCallback could be implemented in the user file - */ -} - -/** - * @brief Incomplete ISO IN callback. - * @param hpcd PCD handle - * @param epnum endpoint number - * @retval None - */ -__weak void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(epnum); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_ISOINIncompleteCallback could be implemented in the user file - */ -} - -/** - * @brief Connection event callback. - * @param hpcd PCD handle - * @retval None - */ -__weak void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_ConnectCallback could be implemented in the user file - */ -} - -/** - * @brief Disconnection event callback. - * @param hpcd PCD handle - * @retval None - */ -__weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_DisconnectCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup PCD_Exported_Functions_Group3 Peripheral Control functions - * @brief management functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the PCD data - transfers. - -@endverbatim - * @{ - */ - -/** - * @brief Connect the USB device - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd) -{ - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - - __HAL_LOCK(hpcd); - - if ((hpcd->Init.battery_charging_enable == 1U) && - (hpcd->Init.phy_itface != USB_OTG_ULPI_PHY)) - { - /* Enable USB Transceiver */ - USBx->GCCFG |= USB_OTG_GCCFG_PWRDWN; - } - (void)USB_DevConnect(hpcd->Instance); - __HAL_UNLOCK(hpcd); - - return HAL_OK; -} - -/** - * @brief Disconnect the USB device. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd) -{ - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - - __HAL_LOCK(hpcd); - (void)USB_DevDisconnect(hpcd->Instance); - - if ((hpcd->Init.battery_charging_enable == 1U) && - (hpcd->Init.phy_itface != USB_OTG_ULPI_PHY)) - { - /* Disable USB Transceiver */ - USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); - } - - __HAL_UNLOCK(hpcd); - - return HAL_OK; -} - -/** - * @brief Set the USB Device address. - * @param hpcd PCD handle - * @param address new device address - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address) -{ - __HAL_LOCK(hpcd); - hpcd->USB_Address = address; - (void)USB_SetDevAddress(hpcd->Instance, address); - __HAL_UNLOCK(hpcd); - - return HAL_OK; -} -/** - * @brief Open and configure an endpoint. - * @param hpcd PCD handle - * @param ep_addr endpoint address - * @param ep_mps endpoint max packet size - * @param ep_type endpoint type - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, - uint16_t ep_mps, uint8_t ep_type) -{ - HAL_StatusTypeDef ret = HAL_OK; - PCD_EPTypeDef *ep; - - if ((ep_addr & 0x80U) == 0x80U) - { - ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; - ep->is_in = 1U; - } - else - { - ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; - ep->is_in = 0U; - } - - ep->num = ep_addr & EP_ADDR_MSK; - ep->maxpacket = ep_mps; - ep->type = ep_type; - - if (ep->is_in != 0U) - { - /* Assign a Tx FIFO */ - ep->tx_fifo_num = ep->num; - } - /* Set initial data PID. */ - if (ep_type == EP_TYPE_BULK) - { - ep->data_pid_start = 0U; - } - - __HAL_LOCK(hpcd); - (void)USB_ActivateEndpoint(hpcd->Instance, ep); - __HAL_UNLOCK(hpcd); - - return ret; -} - -/** - * @brief Deactivate an endpoint. - * @param hpcd PCD handle - * @param ep_addr endpoint address - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) -{ - PCD_EPTypeDef *ep; - - if ((ep_addr & 0x80U) == 0x80U) - { - ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; - ep->is_in = 1U; - } - else - { - ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; - ep->is_in = 0U; - } - ep->num = ep_addr & EP_ADDR_MSK; - - __HAL_LOCK(hpcd); - (void)USB_DeactivateEndpoint(hpcd->Instance, ep); - __HAL_UNLOCK(hpcd); - return HAL_OK; -} - - -/** - * @brief Receive an amount of data. - * @param hpcd PCD handle - * @param ep_addr endpoint address - * @param pBuf pointer to the reception buffer - * @param len amount of data to be received - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) -{ - PCD_EPTypeDef *ep; - - ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; - - /*setup and start the Xfer */ - ep->xfer_buff = pBuf; - ep->xfer_len = len; - ep->xfer_count = 0U; - ep->is_in = 0U; - ep->num = ep_addr & EP_ADDR_MSK; - - if (hpcd->Init.dma_enable == 1U) - { - ep->dma_addr = (uint32_t)pBuf; - } - - if ((ep_addr & EP_ADDR_MSK) == 0U) - { - (void)USB_EP0StartXfer(hpcd->Instance, ep, (uint8_t)hpcd->Init.dma_enable); - } - else - { - (void)USB_EPStartXfer(hpcd->Instance, ep, (uint8_t)hpcd->Init.dma_enable); - } - - return HAL_OK; -} - -/** - * @brief Get Received Data Size - * @param hpcd PCD handle - * @param ep_addr endpoint address - * @retval Data Size - */ -uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) -{ - return hpcd->OUT_ep[ep_addr & EP_ADDR_MSK].xfer_count; -} -/** - * @brief Send an amount of data - * @param hpcd PCD handle - * @param ep_addr endpoint address - * @param pBuf pointer to the transmission buffer - * @param len amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) -{ - PCD_EPTypeDef *ep; - - ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; - - /*setup and start the Xfer */ - ep->xfer_buff = pBuf; - ep->xfer_len = len; - ep->xfer_count = 0U; - ep->is_in = 1U; - ep->num = ep_addr & EP_ADDR_MSK; - - if (hpcd->Init.dma_enable == 1U) - { - ep->dma_addr = (uint32_t)pBuf; - } - - if ((ep_addr & EP_ADDR_MSK) == 0U) - { - (void)USB_EP0StartXfer(hpcd->Instance, ep, (uint8_t)hpcd->Init.dma_enable); - } - else - { - (void)USB_EPStartXfer(hpcd->Instance, ep, (uint8_t)hpcd->Init.dma_enable); - } - - return HAL_OK; -} - -/** - * @brief Set a STALL condition over an endpoint - * @param hpcd PCD handle - * @param ep_addr endpoint address - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) -{ - PCD_EPTypeDef *ep; - - if (((uint32_t)ep_addr & EP_ADDR_MSK) > hpcd->Init.dev_endpoints) - { - return HAL_ERROR; - } - - if ((0x80U & ep_addr) == 0x80U) - { - ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; - ep->is_in = 1U; - } - else - { - ep = &hpcd->OUT_ep[ep_addr]; - ep->is_in = 0U; - } - - ep->is_stall = 1U; - ep->num = ep_addr & EP_ADDR_MSK; - - __HAL_LOCK(hpcd); - - (void)USB_EPSetStall(hpcd->Instance, ep); - - if ((ep_addr & EP_ADDR_MSK) == 0U) - { - (void)USB_EP0_OutStart(hpcd->Instance, (uint8_t)hpcd->Init.dma_enable, (uint8_t *)hpcd->Setup); - } - - __HAL_UNLOCK(hpcd); - - return HAL_OK; -} - -/** - * @brief Clear a STALL condition over in an endpoint - * @param hpcd PCD handle - * @param ep_addr endpoint address - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) -{ - PCD_EPTypeDef *ep; - - if (((uint32_t)ep_addr & 0x0FU) > hpcd->Init.dev_endpoints) - { - return HAL_ERROR; - } - - if ((0x80U & ep_addr) == 0x80U) - { - ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; - ep->is_in = 1U; - } - else - { - ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; - ep->is_in = 0U; - } - - ep->is_stall = 0U; - ep->num = ep_addr & EP_ADDR_MSK; - - __HAL_LOCK(hpcd); - (void)USB_EPClearStall(hpcd->Instance, ep); - __HAL_UNLOCK(hpcd); - - return HAL_OK; -} - -/** - * @brief Abort an USB EP transaction. - * @param hpcd PCD handle - * @param ep_addr endpoint address - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_Abort(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) -{ - HAL_StatusTypeDef ret; - PCD_EPTypeDef *ep; - - if ((0x80U & ep_addr) == 0x80U) - { - ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; - } - else - { - ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; - } - - /* Stop Xfer */ - ret = USB_EPStopXfer(hpcd->Instance, ep); - - return ret; -} - -/** - * @brief Flush an endpoint - * @param hpcd PCD handle - * @param ep_addr endpoint address - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) -{ - __HAL_LOCK(hpcd); - - if ((ep_addr & 0x80U) == 0x80U) - { - (void)USB_FlushTxFifo(hpcd->Instance, (uint32_t)ep_addr & EP_ADDR_MSK); - } - else - { - (void)USB_FlushRxFifo(hpcd->Instance); - } - - __HAL_UNLOCK(hpcd); - - return HAL_OK; -} - -/** - * @brief Activate remote wakeup signalling - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) -{ - return (USB_ActivateRemoteWakeup(hpcd->Instance)); -} - -/** - * @brief De-activate remote wakeup signalling. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) -{ - return (USB_DeActivateRemoteWakeup(hpcd->Instance)); -} - -/** - * @} - */ - -/** @defgroup PCD_Exported_Functions_Group4 Peripheral State functions - * @brief Peripheral State functions - * -@verbatim - =============================================================================== - ##### Peripheral State functions ##### - =============================================================================== - [..] - This subsection permits to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Return the PCD handle state. - * @param hpcd PCD handle - * @retval HAL state - */ -PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd) -{ - return hpcd->State; -} - -/** - * @brief Set the USB Device high speed test mode. - * @param hpcd PCD handle - * @param testmode USB Device high speed test mode - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_SetTestMode(PCD_HandleTypeDef *hpcd, uint8_t testmode) -{ - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - uint32_t USBx_BASE = (uint32_t)USBx; - - switch (testmode) - { - case TEST_J: - case TEST_K: - case TEST_SE0_NAK: - case TEST_PACKET: - case TEST_FORCE_EN: - USBx_DEVICE->DCTL |= (uint32_t)testmode << 4; - break; - - default: - break; - } - - return HAL_OK; -} -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @addtogroup PCD_Private_Functions - * @{ - */ -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -/** - * @brief Check FIFO for the next packet to be loaded. - * @param hpcd PCD handle - * @param epnum endpoint number - * @retval HAL status - */ -static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum) -{ - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - uint32_t USBx_BASE = (uint32_t)USBx; - USB_OTG_EPTypeDef *ep; - uint32_t len; - uint32_t len32b; - uint32_t fifoemptymsk; - - ep = &hpcd->IN_ep[epnum]; - - if (ep->xfer_count > ep->xfer_len) - { - return HAL_ERROR; - } - - len = ep->xfer_len - ep->xfer_count; - - if (len > ep->maxpacket) - { - len = ep->maxpacket; - } - - len32b = (len + 3U) / 4U; - - while (((USBx_INEP(epnum)->DTXFSTS & USB_OTG_DTXFSTS_INEPTFSAV) >= len32b) && - (ep->xfer_count < ep->xfer_len) && (ep->xfer_len != 0U)) - { - /* Write the FIFO */ - len = ep->xfer_len - ep->xfer_count; - - if (len > ep->maxpacket) - { - len = ep->maxpacket; - } - len32b = (len + 3U) / 4U; - - (void)USB_WritePacket(USBx, ep->xfer_buff, (uint8_t)epnum, (uint16_t)len, - (uint8_t)hpcd->Init.dma_enable); - - ep->xfer_buff += len; - ep->xfer_count += len; - } - - if (ep->xfer_len <= ep->xfer_count) - { - fifoemptymsk = (uint32_t)(0x1UL << (epnum & EP_ADDR_MSK)); - USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk; - } - - return HAL_OK; -} - - -/** - * @brief process EP OUT transfer complete interrupt. - * @param hpcd PCD handle - * @param epnum endpoint number - * @retval HAL status - */ -static HAL_StatusTypeDef PCD_EP_OutXfrComplete_int(PCD_HandleTypeDef *hpcd, uint32_t epnum) -{ - USB_OTG_EPTypeDef *ep; - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t gSNPSiD = *(__IO uint32_t *)(&USBx->CID + 0x1U); - uint32_t DoepintReg = USBx_OUTEP(epnum)->DOEPINT; - - if (hpcd->Init.dma_enable == 1U) - { - if ((DoepintReg & USB_OTG_DOEPINT_STUP) == USB_OTG_DOEPINT_STUP) /* Class C */ - { - /* StupPktRcvd = 1 this is a setup packet */ - if ((gSNPSiD > USB_OTG_CORE_ID_300A) && - ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX)) - { - CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); - } - } - else if ((DoepintReg & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR) /* Class E */ - { - CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPSPR); - } - else if ((DoepintReg & (USB_OTG_DOEPINT_STUP | USB_OTG_DOEPINT_OTEPSPR)) == 0U) - { - /* StupPktRcvd = 1 this is a setup packet */ - if ((gSNPSiD > USB_OTG_CORE_ID_300A) && - ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX)) - { - CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); - } - else - { - ep = &hpcd->OUT_ep[epnum]; - - /* out data packet received over EP */ - ep->xfer_count = ep->xfer_size - (USBx_OUTEP(epnum)->DOEPTSIZ & USB_OTG_DOEPTSIZ_XFRSIZ); - - if (epnum == 0U) - { - if (ep->xfer_len == 0U) - { - /* this is ZLP, so prepare EP0 for next setup */ - (void)USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup); - } - else - { - ep->xfer_buff += ep->xfer_count; - } - } - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->DataOutStageCallback(hpcd, (uint8_t)epnum); -#else - HAL_PCD_DataOutStageCallback(hpcd, (uint8_t)epnum); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - } - else - { - /* ... */ - } - } - else - { - if (gSNPSiD == USB_OTG_CORE_ID_310A) - { - /* StupPktRcvd = 1 this is a setup packet */ - if ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX) - { - CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); - } - else - { - if ((DoepintReg & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR) - { - CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPSPR); - } - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->DataOutStageCallback(hpcd, (uint8_t)epnum); -#else - HAL_PCD_DataOutStageCallback(hpcd, (uint8_t)epnum); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - } - else - { - if ((epnum == 0U) && (hpcd->OUT_ep[epnum].xfer_len == 0U)) - { - /* this is ZLP, so prepare EP0 for next setup */ - (void)USB_EP0_OutStart(hpcd->Instance, 0U, (uint8_t *)hpcd->Setup); - } - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->DataOutStageCallback(hpcd, (uint8_t)epnum); -#else - HAL_PCD_DataOutStageCallback(hpcd, (uint8_t)epnum); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - } - - return HAL_OK; -} - - -/** - * @brief process EP OUT setup packet received interrupt. - * @param hpcd PCD handle - * @param epnum endpoint number - * @retval HAL status - */ -static HAL_StatusTypeDef PCD_EP_OutSetupPacket_int(PCD_HandleTypeDef *hpcd, uint32_t epnum) -{ - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t gSNPSiD = *(__IO uint32_t *)(&USBx->CID + 0x1U); - uint32_t DoepintReg = USBx_OUTEP(epnum)->DOEPINT; - - if ((gSNPSiD > USB_OTG_CORE_ID_300A) && - ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX)) - { - CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); - } - - /* Inform the upper layer that a setup packet is available */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->SetupStageCallback(hpcd); -#else - HAL_PCD_SetupStageCallback(hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - - if ((gSNPSiD > USB_OTG_CORE_ID_300A) && (hpcd->Init.dma_enable == 1U)) - { - (void)USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup); - } - - return HAL_OK; -} -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - - -/** - * @} - */ -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ -#endif /* HAL_PCD_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ +/** + ****************************************************************************** + * @file stm32f4xx_hal_pcd.c + * @author MCD Application Team + * @brief PCD HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The PCD HAL driver can be used as follows: + + (#) Declare a PCD_HandleTypeDef handle structure, for example: + PCD_HandleTypeDef hpcd; + + (#) Fill parameters of Init structure in HCD handle + + (#) Call HAL_PCD_Init() API to initialize the PCD peripheral (Core, Device core, ...) + + (#) Initialize the PCD low level resources through the HAL_PCD_MspInit() API: + (##) Enable the PCD/USB Low Level interface clock using + (+++) __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); + (+++) __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); (For High Speed Mode) + + (##) Initialize the related GPIO clocks + (##) Configure PCD pin-out + (##) Configure PCD NVIC interrupt + + (#)Associate the Upper USB device stack to the HAL PCD Driver: + (##) hpcd.pData = pdev; + + (#)Enable PCD transmission and reception: + (##) HAL_PCD_Start(); + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup PCD PCD + * @brief PCD HAL module driver + * @{ + */ + +#ifdef HAL_PCD_MODULE_ENABLED + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PCD_Private_Macros PCD Private Macros + * @{ + */ +#define PCD_MIN(a, b) (((a) < (b)) ? (a) : (b)) +#define PCD_MAX(a, b) (((a) > (b)) ? (a) : (b)) +/** + * @} + */ + +/* Private functions prototypes ----------------------------------------------*/ +/** @defgroup PCD_Private_Functions PCD Private Functions + * @{ + */ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum); +static HAL_StatusTypeDef PCD_EP_OutXfrComplete_int(PCD_HandleTypeDef *hpcd, uint32_t epnum); +static HAL_StatusTypeDef PCD_EP_OutSetupPacket_int(PCD_HandleTypeDef *hpcd, uint32_t epnum); +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PCD_Exported_Functions PCD Exported Functions + * @{ + */ + +/** @defgroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the PCD according to the specified + * parameters in the PCD_InitTypeDef and initialize the associated handle. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx; + uint8_t i; + + /* Check the PCD handle allocation */ + if (hpcd == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_PCD_ALL_INSTANCE(hpcd->Instance)); + + USBx = hpcd->Instance; + + if (hpcd->State == HAL_PCD_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hpcd->Lock = HAL_UNLOCKED; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SOFCallback = HAL_PCD_SOFCallback; + hpcd->SetupStageCallback = HAL_PCD_SetupStageCallback; + hpcd->ResetCallback = HAL_PCD_ResetCallback; + hpcd->SuspendCallback = HAL_PCD_SuspendCallback; + hpcd->ResumeCallback = HAL_PCD_ResumeCallback; + hpcd->ConnectCallback = HAL_PCD_ConnectCallback; + hpcd->DisconnectCallback = HAL_PCD_DisconnectCallback; + hpcd->DataOutStageCallback = HAL_PCD_DataOutStageCallback; + hpcd->DataInStageCallback = HAL_PCD_DataInStageCallback; + hpcd->ISOOUTIncompleteCallback = HAL_PCD_ISOOUTIncompleteCallback; + hpcd->ISOINIncompleteCallback = HAL_PCD_ISOINIncompleteCallback; + hpcd->LPMCallback = HAL_PCDEx_LPM_Callback; + hpcd->BCDCallback = HAL_PCDEx_BCD_Callback; + + if (hpcd->MspInitCallback == NULL) + { + hpcd->MspInitCallback = HAL_PCD_MspInit; + } + + /* Init the low level hardware */ + hpcd->MspInitCallback(hpcd); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + HAL_PCD_MspInit(hpcd); +#endif /* (USE_HAL_PCD_REGISTER_CALLBACKS) */ + } + + hpcd->State = HAL_PCD_STATE_BUSY; + + /* Disable DMA mode for FS instance */ + if ((USBx->CID & (0x1U << 8)) == 0U) + { + hpcd->Init.dma_enable = 0U; + } + + /* Disable the Interrupts */ + __HAL_PCD_DISABLE(hpcd); + + /*Init the Core (common init.) */ + if (USB_CoreInit(hpcd->Instance, hpcd->Init) != HAL_OK) + { + hpcd->State = HAL_PCD_STATE_ERROR; + return HAL_ERROR; + } + + /* Force Device Mode*/ + (void)USB_SetCurrentMode(hpcd->Instance, USB_DEVICE_MODE); + + /* Init endpoints structures */ + for (i = 0U; i < hpcd->Init.dev_endpoints; i++) + { + /* Init ep structure */ + hpcd->IN_ep[i].is_in = 1U; + hpcd->IN_ep[i].num = i; + hpcd->IN_ep[i].tx_fifo_num = i; + /* Control until ep is activated */ + hpcd->IN_ep[i].type = EP_TYPE_CTRL; + hpcd->IN_ep[i].maxpacket = 0U; + hpcd->IN_ep[i].xfer_buff = 0U; + hpcd->IN_ep[i].xfer_len = 0U; + } + + for (i = 0U; i < hpcd->Init.dev_endpoints; i++) + { + hpcd->OUT_ep[i].is_in = 0U; + hpcd->OUT_ep[i].num = i; + /* Control until ep is activated */ + hpcd->OUT_ep[i].type = EP_TYPE_CTRL; + hpcd->OUT_ep[i].maxpacket = 0U; + hpcd->OUT_ep[i].xfer_buff = 0U; + hpcd->OUT_ep[i].xfer_len = 0U; + } + + /* Init Device */ + if (USB_DevInit(hpcd->Instance, hpcd->Init) != HAL_OK) + { + hpcd->State = HAL_PCD_STATE_ERROR; + return HAL_ERROR; + } + + hpcd->USB_Address = 0U; + hpcd->State = HAL_PCD_STATE_READY; +#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) + /* Activate LPM */ + if (hpcd->Init.lpm_enable == 1U) + { + (void)HAL_PCDEx_ActivateLPM(hpcd); + } +#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ + (void)USB_DevDisconnect(hpcd->Instance); + + return HAL_OK; +} + +/** + * @brief DeInitializes the PCD peripheral. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd) +{ + /* Check the PCD handle allocation */ + if (hpcd == NULL) + { + return HAL_ERROR; + } + + hpcd->State = HAL_PCD_STATE_BUSY; + + /* Stop Device */ + if (USB_StopDevice(hpcd->Instance) != HAL_OK) + { + return HAL_ERROR; + } + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + if (hpcd->MspDeInitCallback == NULL) + { + hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware */ + hpcd->MspDeInitCallback(hpcd); +#else + /* DeInit the low level hardware: CLOCK, NVIC.*/ + HAL_PCD_MspDeInit(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + hpcd->State = HAL_PCD_STATE_RESET; + + return HAL_OK; +} + +/** + * @brief Initializes the PCD MSP. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes PCD MSP. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User USB PCD Callback + * To be used instead of the weak predefined callback + * @param hpcd USB PCD handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_PCD_SOF_CB_ID USB PCD SOF callback ID + * @arg @ref HAL_PCD_SETUPSTAGE_CB_ID USB PCD Setup callback ID + * @arg @ref HAL_PCD_RESET_CB_ID USB PCD Reset callback ID + * @arg @ref HAL_PCD_SUSPEND_CB_ID USB PCD Suspend callback ID + * @arg @ref HAL_PCD_RESUME_CB_ID USB PCD Resume callback ID + * @arg @ref HAL_PCD_CONNECT_CB_ID USB PCD Connect callback ID + * @arg @ref HAL_PCD_DISCONNECT_CB_ID OTG PCD Disconnect callback ID + * @arg @ref HAL_PCD_MSPINIT_CB_ID MspDeInit callback ID + * @arg @ref HAL_PCD_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, + HAL_PCD_CallbackIDTypeDef CallbackID, + pPCD_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + switch (CallbackID) + { + case HAL_PCD_SOF_CB_ID : + hpcd->SOFCallback = pCallback; + break; + + case HAL_PCD_SETUPSTAGE_CB_ID : + hpcd->SetupStageCallback = pCallback; + break; + + case HAL_PCD_RESET_CB_ID : + hpcd->ResetCallback = pCallback; + break; + + case HAL_PCD_SUSPEND_CB_ID : + hpcd->SuspendCallback = pCallback; + break; + + case HAL_PCD_RESUME_CB_ID : + hpcd->ResumeCallback = pCallback; + break; + + case HAL_PCD_CONNECT_CB_ID : + hpcd->ConnectCallback = pCallback; + break; + + case HAL_PCD_DISCONNECT_CB_ID : + hpcd->DisconnectCallback = pCallback; + break; + + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = pCallback; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hpcd->State == HAL_PCD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = pCallback; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + return status; +} + +/** + * @brief Unregister an USB PCD Callback + * USB PCD callback is redirected to the weak predefined callback + * @param hpcd USB PCD handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_PCD_SOF_CB_ID USB PCD SOF callback ID + * @arg @ref HAL_PCD_SETUPSTAGE_CB_ID USB PCD Setup callback ID + * @arg @ref HAL_PCD_RESET_CB_ID USB PCD Reset callback ID + * @arg @ref HAL_PCD_SUSPEND_CB_ID USB PCD Suspend callback ID + * @arg @ref HAL_PCD_RESUME_CB_ID USB PCD Resume callback ID + * @arg @ref HAL_PCD_CONNECT_CB_ID USB PCD Connect callback ID + * @arg @ref HAL_PCD_DISCONNECT_CB_ID OTG PCD Disconnect callback ID + * @arg @ref HAL_PCD_MSPINIT_CB_ID MspDeInit callback ID + * @arg @ref HAL_PCD_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + /* Setup Legacy weak Callbacks */ + if (hpcd->State == HAL_PCD_STATE_READY) + { + switch (CallbackID) + { + case HAL_PCD_SOF_CB_ID : + hpcd->SOFCallback = HAL_PCD_SOFCallback; + break; + + case HAL_PCD_SETUPSTAGE_CB_ID : + hpcd->SetupStageCallback = HAL_PCD_SetupStageCallback; + break; + + case HAL_PCD_RESET_CB_ID : + hpcd->ResetCallback = HAL_PCD_ResetCallback; + break; + + case HAL_PCD_SUSPEND_CB_ID : + hpcd->SuspendCallback = HAL_PCD_SuspendCallback; + break; + + case HAL_PCD_RESUME_CB_ID : + hpcd->ResumeCallback = HAL_PCD_ResumeCallback; + break; + + case HAL_PCD_CONNECT_CB_ID : + hpcd->ConnectCallback = HAL_PCD_ConnectCallback; + break; + + case HAL_PCD_DISCONNECT_CB_ID : + hpcd->DisconnectCallback = HAL_PCD_DisconnectCallback; + break; + + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = HAL_PCD_MspInit; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hpcd->State == HAL_PCD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = HAL_PCD_MspInit; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + return status; +} + +/** + * @brief Register USB PCD Data OUT Stage Callback + * To be used instead of the weak HAL_PCD_DataOutStageCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Data OUT Stage Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataOutStageCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataOutStageCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Data OUT Stage Callback + * USB PCD Data OUT Stage Callback is redirected to the weak HAL_PCD_DataOutStageCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataOutStageCallback = HAL_PCD_DataOutStageCallback; /* Legacy weak DataOutStageCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD Data IN Stage Callback + * To be used instead of the weak HAL_PCD_DataInStageCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Data IN Stage Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataInStageCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataInStageCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Data IN Stage Callback + * USB PCD Data OUT Stage Callback is redirected to the weak HAL_PCD_DataInStageCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataInStageCallback = HAL_PCD_DataInStageCallback; /* Legacy weak DataInStageCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD Iso OUT incomplete Callback + * To be used instead of the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Iso OUT incomplete Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoOutIncpltCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOOUTIncompleteCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Iso OUT incomplete Callback + * USB PCD Iso OUT incomplete Callback is redirected + * to the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOOUTIncompleteCallback = HAL_PCD_ISOOUTIncompleteCallback; /* Legacy weak ISOOUTIncompleteCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD Iso IN incomplete Callback + * To be used instead of the weak HAL_PCD_ISOINIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Iso IN incomplete Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoInIncpltCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOINIncompleteCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Iso IN incomplete Callback + * USB PCD Iso IN incomplete Callback is redirected + * to the weak HAL_PCD_ISOINIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOINIncompleteCallback = HAL_PCD_ISOINIncompleteCallback; /* Legacy weak ISOINIncompleteCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD BCD Callback + * To be used instead of the weak HAL_PCDEx_BCD_Callback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD BCD Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, pPCD_BcdCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->BCDCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD BCD Callback + * USB BCD Callback is redirected to the weak HAL_PCDEx_BCD_Callback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->BCDCallback = HAL_PCDEx_BCD_Callback; /* Legacy weak HAL_PCDEx_BCD_Callback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD LPM Callback + * To be used instead of the weak HAL_PCDEx_LPM_Callback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD LPM Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, pPCD_LpmCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->LPMCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD LPM Callback + * USB LPM Callback is redirected to the weak HAL_PCDEx_LPM_Callback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->LPMCallback = HAL_PCDEx_LPM_Callback; /* Legacy weak HAL_PCDEx_LPM_Callback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the PCD data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Start the USB device + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + __HAL_LOCK(hpcd); + + if ((hpcd->Init.battery_charging_enable == 1U) && + (hpcd->Init.phy_itface != USB_OTG_ULPI_PHY)) + { + /* Enable USB Transceiver */ + USBx->GCCFG |= USB_OTG_GCCFG_PWRDWN; + } + + __HAL_PCD_ENABLE(hpcd); + (void)USB_DevConnect(hpcd->Instance); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Stop the USB device. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + __HAL_LOCK(hpcd); + __HAL_PCD_DISABLE(hpcd); + (void)USB_DevDisconnect(hpcd->Instance); + + (void)USB_FlushTxFifo(hpcd->Instance, 0x10U); + + if ((hpcd->Init.battery_charging_enable == 1U) && + (hpcd->Init.phy_itface != USB_OTG_ULPI_PHY)) + { + /* Disable USB Transceiver */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); + } + + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** + * @brief Handles PCD interrupt request. + * @param hpcd PCD handle + * @retval HAL status + */ +void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + USB_OTG_EPTypeDef *ep; + uint32_t i; + uint32_t ep_intr; + uint32_t epint; + uint32_t epnum; + uint32_t fifoemptymsk; + uint32_t RegVal; + + /* ensure that we are in device mode */ + if (USB_GetMode(hpcd->Instance) == USB_OTG_MODE_DEVICE) + { + /* avoid spurious interrupt */ + if (__HAL_PCD_IS_INVALID_INTERRUPT(hpcd)) + { + return; + } + + /* store current frame number */ + hpcd->FrameNumber = (USBx_DEVICE->DSTS & USB_OTG_DSTS_FNSOF_Msk) >> USB_OTG_DSTS_FNSOF_Pos; + + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_MMIS)) + { + /* incorrect mode, acknowledge the interrupt */ + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_MMIS); + } + + /* Handle RxQLevel Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_RXFLVL)) + { + USB_MASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL); + + RegVal = USBx->GRXSTSP; + + ep = &hpcd->OUT_ep[RegVal & USB_OTG_GRXSTSP_EPNUM]; + + if (((RegVal & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_DATA_UPDT) + { + if ((RegVal & USB_OTG_GRXSTSP_BCNT) != 0U) + { + (void)USB_ReadPacket(USBx, ep->xfer_buff, + (uint16_t)((RegVal & USB_OTG_GRXSTSP_BCNT) >> 4)); + + ep->xfer_buff += (RegVal & USB_OTG_GRXSTSP_BCNT) >> 4; + ep->xfer_count += (RegVal & USB_OTG_GRXSTSP_BCNT) >> 4; + } + } + else if (((RegVal & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_SETUP_UPDT) + { + (void)USB_ReadPacket(USBx, (uint8_t *)hpcd->Setup, 8U); + ep->xfer_count += (RegVal & USB_OTG_GRXSTSP_BCNT) >> 4; + } + else + { + /* ... */ + } + + USB_UNMASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL); + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OEPINT)) + { + epnum = 0U; + + /* Read in the device interrupt bits */ + ep_intr = USB_ReadDevAllOutEpInterrupt(hpcd->Instance); + + while (ep_intr != 0U) + { + if ((ep_intr & 0x1U) != 0U) + { + epint = USB_ReadDevOutEPInterrupt(hpcd->Instance, (uint8_t)epnum); + + if ((epint & USB_OTG_DOEPINT_XFRC) == USB_OTG_DOEPINT_XFRC) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_XFRC); + (void)PCD_EP_OutXfrComplete_int(hpcd, epnum); + } + + if ((epint & USB_OTG_DOEPINT_STUP) == USB_OTG_DOEPINT_STUP) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STUP); + /* Class B setup phase done for previous decoded setup */ + (void)PCD_EP_OutSetupPacket_int(hpcd, epnum); + } + + if ((epint & USB_OTG_DOEPINT_OTEPDIS) == USB_OTG_DOEPINT_OTEPDIS) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPDIS); + } + + /* Clear OUT Endpoint disable interrupt */ + if ((epint & USB_OTG_DOEPINT_EPDISD) == USB_OTG_DOEPINT_EPDISD) + { + if ((USBx->GINTSTS & USB_OTG_GINTSTS_BOUTNAKEFF) == USB_OTG_GINTSTS_BOUTNAKEFF) + { + USBx_DEVICE->DCTL |= USB_OTG_DCTL_CGONAK; + } + + ep = &hpcd->OUT_ep[epnum]; + + if (ep->is_iso_incomplete == 1U) + { + ep->is_iso_incomplete = 0U; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ISOOUTIncompleteCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_ISOOUTIncompleteCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_EPDISD); + } + + /* Clear Status Phase Received interrupt */ + if ((epint & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPSPR); + } + + /* Clear OUT NAK interrupt */ + if ((epint & USB_OTG_DOEPINT_NAK) == USB_OTG_DOEPINT_NAK) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_NAK); + } + } + epnum++; + ep_intr >>= 1U; + } + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IEPINT)) + { + /* Read in the device interrupt bits */ + ep_intr = USB_ReadDevAllInEpInterrupt(hpcd->Instance); + + epnum = 0U; + + while (ep_intr != 0U) + { + if ((ep_intr & 0x1U) != 0U) /* In ITR */ + { + epint = USB_ReadDevInEPInterrupt(hpcd->Instance, (uint8_t)epnum); + + if ((epint & USB_OTG_DIEPINT_XFRC) == USB_OTG_DIEPINT_XFRC) + { + fifoemptymsk = (uint32_t)(0x1UL << (epnum & EP_ADDR_MSK)); + USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk; + + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_XFRC); + + if (hpcd->Init.dma_enable == 1U) + { + hpcd->IN_ep[epnum].xfer_buff += hpcd->IN_ep[epnum].maxpacket; + + /* this is ZLP, so prepare EP0 for next setup */ + if ((epnum == 0U) && (hpcd->IN_ep[epnum].xfer_len == 0U)) + { + /* prepare to rx more setup packets */ + (void)USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup); + } + } + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_DataInStageCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + if ((epint & USB_OTG_DIEPINT_TOC) == USB_OTG_DIEPINT_TOC) + { + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_TOC); + } + if ((epint & USB_OTG_DIEPINT_ITTXFE) == USB_OTG_DIEPINT_ITTXFE) + { + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_ITTXFE); + } + if ((epint & USB_OTG_DIEPINT_INEPNE) == USB_OTG_DIEPINT_INEPNE) + { + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_INEPNE); + } + if ((epint & USB_OTG_DIEPINT_EPDISD) == USB_OTG_DIEPINT_EPDISD) + { + (void)USB_FlushTxFifo(USBx, epnum); + + ep = &hpcd->IN_ep[epnum]; + + if (ep->is_iso_incomplete == 1U) + { + ep->is_iso_incomplete = 0U; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ISOINIncompleteCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_ISOINIncompleteCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_EPDISD); + } + if ((epint & USB_OTG_DIEPINT_TXFE) == USB_OTG_DIEPINT_TXFE) + { + (void)PCD_WriteEmptyTxFifo(hpcd, epnum); + } + } + epnum++; + ep_intr >>= 1U; + } + } + + /* Handle Resume Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT)) + { + /* Clear the Remote Wake-up Signaling */ + USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG; + + if (hpcd->LPM_State == LPM_L1) + { + hpcd->LPM_State = LPM_L0; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->LPMCallback(hpcd, PCD_LPM_L0_ACTIVE); +#else + HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L0_ACTIVE); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ResumeCallback(hpcd); +#else + HAL_PCD_ResumeCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT); + } + + /* Handle Suspend Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP)) + { + if ((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SuspendCallback(hpcd); +#else + HAL_PCD_SuspendCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP); + } +#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) + /* Handle LPM Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_LPMINT)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_LPMINT); + + if (hpcd->LPM_State == LPM_L0) + { + hpcd->LPM_State = LPM_L1; + hpcd->BESL = (hpcd->Instance->GLPMCFG & USB_OTG_GLPMCFG_BESL) >> 2U; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->LPMCallback(hpcd, PCD_LPM_L1_ACTIVE); +#else + HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L1_ACTIVE); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SuspendCallback(hpcd); +#else + HAL_PCD_SuspendCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + } +#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ + /* Handle Reset Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBRST)) + { + USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG; + (void)USB_FlushTxFifo(hpcd->Instance, 0x10U); + + for (i = 0U; i < hpcd->Init.dev_endpoints; i++) + { + USBx_INEP(i)->DIEPINT = 0xFB7FU; + USBx_INEP(i)->DIEPCTL &= ~USB_OTG_DIEPCTL_STALL; + USBx_OUTEP(i)->DOEPINT = 0xFB7FU; + USBx_OUTEP(i)->DOEPCTL &= ~USB_OTG_DOEPCTL_STALL; + USBx_OUTEP(i)->DOEPCTL |= USB_OTG_DOEPCTL_SNAK; + } + USBx_DEVICE->DAINTMSK |= 0x10001U; + + if (hpcd->Init.use_dedicated_ep1 != 0U) + { + USBx_DEVICE->DOUTEP1MSK |= USB_OTG_DOEPMSK_STUPM | + USB_OTG_DOEPMSK_XFRCM | + USB_OTG_DOEPMSK_EPDM; + + USBx_DEVICE->DINEP1MSK |= USB_OTG_DIEPMSK_TOM | + USB_OTG_DIEPMSK_XFRCM | + USB_OTG_DIEPMSK_EPDM; + } + else + { + USBx_DEVICE->DOEPMSK |= USB_OTG_DOEPMSK_STUPM | + USB_OTG_DOEPMSK_XFRCM | + USB_OTG_DOEPMSK_EPDM | + USB_OTG_DOEPMSK_OTEPSPRM | + USB_OTG_DOEPMSK_NAKM; + + USBx_DEVICE->DIEPMSK |= USB_OTG_DIEPMSK_TOM | + USB_OTG_DIEPMSK_XFRCM | + USB_OTG_DIEPMSK_EPDM; + } + + /* Set Default Address to 0 */ + USBx_DEVICE->DCFG &= ~USB_OTG_DCFG_DAD; + + /* setup EP0 to receive SETUP packets */ + (void)USB_EP0_OutStart(hpcd->Instance, (uint8_t)hpcd->Init.dma_enable, + (uint8_t *)hpcd->Setup); + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBRST); + } + + /* Handle Enumeration done Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE)) + { + (void)USB_ActivateSetup(hpcd->Instance); + hpcd->Init.speed = USB_GetDevSpeed(hpcd->Instance); + + /* Set USB Turnaround time */ + (void)USB_SetTurnaroundTime(hpcd->Instance, + HAL_RCC_GetHCLKFreq(), + (uint8_t)hpcd->Init.speed); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ResetCallback(hpcd); +#else + HAL_PCD_ResetCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE); + } + + /* Handle SOF Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SOF)) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SOFCallback(hpcd); +#else + HAL_PCD_SOFCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SOF); + } + + /* Handle Global OUT NAK effective Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_BOUTNAKEFF)) + { + USBx->GINTMSK &= ~USB_OTG_GINTMSK_GONAKEFFM; + + for (epnum = 1U; epnum < hpcd->Init.dev_endpoints; epnum++) + { + if (hpcd->OUT_ep[epnum].is_iso_incomplete == 1U) + { + /* Abort current transaction and disable the EP */ + (void)HAL_PCD_EP_Abort(hpcd, (uint8_t)epnum); + } + } + } + + /* Handle Incomplete ISO IN Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR)) + { + for (epnum = 1U; epnum < hpcd->Init.dev_endpoints; epnum++) + { + RegVal = USBx_INEP(epnum)->DIEPCTL; + + if ((hpcd->IN_ep[epnum].type == EP_TYPE_ISOC) && + ((RegVal & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA)) + { + hpcd->IN_ep[epnum].is_iso_incomplete = 1U; + + /* Abort current transaction and disable the EP */ + (void)HAL_PCD_EP_Abort(hpcd, (uint8_t)(epnum | 0x80U)); + } + } + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR); + } + + /* Handle Incomplete ISO OUT Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT)) + { + for (epnum = 1U; epnum < hpcd->Init.dev_endpoints; epnum++) + { + RegVal = USBx_OUTEP(epnum)->DOEPCTL; + + if ((hpcd->OUT_ep[epnum].type == EP_TYPE_ISOC) && + ((RegVal & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) && + ((RegVal & (0x1U << 16)) == (hpcd->FrameNumber & 0x1U))) + { + hpcd->OUT_ep[epnum].is_iso_incomplete = 1U; + + USBx->GINTMSK |= USB_OTG_GINTMSK_GONAKEFFM; + + if ((USBx->GINTSTS & USB_OTG_GINTSTS_BOUTNAKEFF) == 0U) + { + USBx_DEVICE->DCTL |= USB_OTG_DCTL_SGONAK; + break; + } + } + } + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT); + } + + /* Handle Connection event Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT)) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ConnectCallback(hpcd); +#else + HAL_PCD_ConnectCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT); + } + + /* Handle Disconnection event Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OTGINT)) + { + RegVal = hpcd->Instance->GOTGINT; + + if ((RegVal & USB_OTG_GOTGINT_SEDET) == USB_OTG_GOTGINT_SEDET) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DisconnectCallback(hpcd); +#else + HAL_PCD_DisconnectCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + hpcd->Instance->GOTGINT |= RegVal; + } + } +} + + +/** + * @brief Handles PCD Wakeup interrupt request. + * @param hpcd PCD handle + * @retval HAL status + */ +void HAL_PCD_WKUP_IRQHandler(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx; + + USBx = hpcd->Instance; + + if ((USBx->CID & (0x1U << 8)) == 0U) + { + /* Clear EXTI pending Bit */ + __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG(); + } + else + { + /* Clear EXTI pending Bit */ + __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG(); + } +} +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + + +/** + * @brief Data OUT stage callback. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DataOutStageCallback could be implemented in the user file + */ +} + +/** + * @brief Data IN stage callback + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DataInStageCallback could be implemented in the user file + */ +} +/** + * @brief Setup stage callback + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SetupStageCallback could be implemented in the user file + */ +} + +/** + * @brief USB Start Of Frame callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SOFCallback could be implemented in the user file + */ +} + +/** + * @brief USB Reset callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ResetCallback could be implemented in the user file + */ +} + +/** + * @brief Suspend event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SuspendCallback could be implemented in the user file + */ +} + +/** + * @brief Resume event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ResumeCallback could be implemented in the user file + */ +} + +/** + * @brief Incomplete ISO OUT callback. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ISOOUTIncompleteCallback could be implemented in the user file + */ +} + +/** + * @brief Incomplete ISO IN callback. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ISOINIncompleteCallback could be implemented in the user file + */ +} + +/** + * @brief Connection event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ConnectCallback could be implemented in the user file + */ +} + +/** + * @brief Disconnection event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DisconnectCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group3 Peripheral Control functions + * @brief management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the PCD data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Connect the USB device + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + __HAL_LOCK(hpcd); + + if ((hpcd->Init.battery_charging_enable == 1U) && + (hpcd->Init.phy_itface != USB_OTG_ULPI_PHY)) + { + /* Enable USB Transceiver */ + USBx->GCCFG |= USB_OTG_GCCFG_PWRDWN; + } + (void)USB_DevConnect(hpcd->Instance); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Disconnect the USB device. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + __HAL_LOCK(hpcd); + (void)USB_DevDisconnect(hpcd->Instance); + + if ((hpcd->Init.battery_charging_enable == 1U) && + (hpcd->Init.phy_itface != USB_OTG_ULPI_PHY)) + { + /* Disable USB Transceiver */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); + } + + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Set the USB Device address. + * @param hpcd PCD handle + * @param address new device address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address) +{ + __HAL_LOCK(hpcd); + hpcd->USB_Address = address; + (void)USB_SetDevAddress(hpcd->Instance, address); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} +/** + * @brief Open and configure an endpoint. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @param ep_mps endpoint max packet size + * @param ep_type endpoint type + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, + uint16_t ep_mps, uint8_t ep_type) +{ + HAL_StatusTypeDef ret = HAL_OK; + PCD_EPTypeDef *ep; + + if ((ep_addr & 0x80U) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 0U; + } + + ep->num = ep_addr & EP_ADDR_MSK; + ep->maxpacket = ep_mps; + ep->type = ep_type; + + if (ep->is_in != 0U) + { + /* Assign a Tx FIFO */ + ep->tx_fifo_num = ep->num; + } + /* Set initial data PID. */ + if (ep_type == EP_TYPE_BULK) + { + ep->data_pid_start = 0U; + } + + __HAL_LOCK(hpcd); + (void)USB_ActivateEndpoint(hpcd->Instance, ep); + __HAL_UNLOCK(hpcd); + + return ret; +} + +/** + * @brief Deactivate an endpoint. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep; + + if ((ep_addr & 0x80U) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 0U; + } + ep->num = ep_addr & EP_ADDR_MSK; + + __HAL_LOCK(hpcd); + (void)USB_DeactivateEndpoint(hpcd->Instance, ep); + __HAL_UNLOCK(hpcd); + return HAL_OK; +} + + +/** + * @brief Receive an amount of data. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @param pBuf pointer to the reception buffer + * @param len amount of data to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) +{ + PCD_EPTypeDef *ep; + + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + + /*setup and start the Xfer */ + ep->xfer_buff = pBuf; + ep->xfer_len = len; + ep->xfer_count = 0U; + ep->is_in = 0U; + ep->num = ep_addr & EP_ADDR_MSK; + + if (hpcd->Init.dma_enable == 1U) + { + ep->dma_addr = (uint32_t)pBuf; + } + + if ((ep_addr & EP_ADDR_MSK) == 0U) + { + (void)USB_EP0StartXfer(hpcd->Instance, ep, (uint8_t)hpcd->Init.dma_enable); + } + else + { + (void)USB_EPStartXfer(hpcd->Instance, ep, (uint8_t)hpcd->Init.dma_enable); + } + + return HAL_OK; +} + +/** + * @brief Get Received Data Size + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval Data Size + */ +uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + return hpcd->OUT_ep[ep_addr & EP_ADDR_MSK].xfer_count; +} +/** + * @brief Send an amount of data + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @param pBuf pointer to the transmission buffer + * @param len amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) +{ + PCD_EPTypeDef *ep; + + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + + /*setup and start the Xfer */ + ep->xfer_buff = pBuf; + ep->xfer_len = len; + ep->xfer_count = 0U; + ep->is_in = 1U; + ep->num = ep_addr & EP_ADDR_MSK; + + if (hpcd->Init.dma_enable == 1U) + { + ep->dma_addr = (uint32_t)pBuf; + } + + if ((ep_addr & EP_ADDR_MSK) == 0U) + { + (void)USB_EP0StartXfer(hpcd->Instance, ep, (uint8_t)hpcd->Init.dma_enable); + } + else + { + (void)USB_EPStartXfer(hpcd->Instance, ep, (uint8_t)hpcd->Init.dma_enable); + } + + return HAL_OK; +} + +/** + * @brief Set a STALL condition over an endpoint + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep; + + if (((uint32_t)ep_addr & EP_ADDR_MSK) > hpcd->Init.dev_endpoints) + { + return HAL_ERROR; + } + + if ((0x80U & ep_addr) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr]; + ep->is_in = 0U; + } + + ep->is_stall = 1U; + ep->num = ep_addr & EP_ADDR_MSK; + + __HAL_LOCK(hpcd); + + (void)USB_EPSetStall(hpcd->Instance, ep); + + if ((ep_addr & EP_ADDR_MSK) == 0U) + { + (void)USB_EP0_OutStart(hpcd->Instance, (uint8_t)hpcd->Init.dma_enable, (uint8_t *)hpcd->Setup); + } + + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Clear a STALL condition over in an endpoint + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep; + + if (((uint32_t)ep_addr & 0x0FU) > hpcd->Init.dev_endpoints) + { + return HAL_ERROR; + } + + if ((0x80U & ep_addr) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 0U; + } + + ep->is_stall = 0U; + ep->num = ep_addr & EP_ADDR_MSK; + + __HAL_LOCK(hpcd); + (void)USB_EPClearStall(hpcd->Instance, ep); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Abort an USB EP transaction. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Abort(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + HAL_StatusTypeDef ret; + PCD_EPTypeDef *ep; + + if ((0x80U & ep_addr) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + } + + /* Stop Xfer */ + ret = USB_EPStopXfer(hpcd->Instance, ep); + + return ret; +} + +/** + * @brief Flush an endpoint + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + __HAL_LOCK(hpcd); + + if ((ep_addr & 0x80U) == 0x80U) + { + (void)USB_FlushTxFifo(hpcd->Instance, (uint32_t)ep_addr & EP_ADDR_MSK); + } + else + { + (void)USB_FlushRxFifo(hpcd->Instance); + } + + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Activate remote wakeup signalling + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) +{ + return (USB_ActivateRemoteWakeup(hpcd->Instance)); +} + +/** + * @brief De-activate remote wakeup signalling. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) +{ + return (USB_DeActivateRemoteWakeup(hpcd->Instance)); +} + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the PCD handle state. + * @param hpcd PCD handle + * @retval HAL state + */ +PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd) +{ + return hpcd->State; +} + +/** + * @brief Set the USB Device high speed test mode. + * @param hpcd PCD handle + * @param testmode USB Device high speed test mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_SetTestMode(PCD_HandleTypeDef *hpcd, uint8_t testmode) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + + switch (testmode) + { + case TEST_J: + case TEST_K: + case TEST_SE0_NAK: + case TEST_PACKET: + case TEST_FORCE_EN: + USBx_DEVICE->DCTL |= (uint32_t)testmode << 4; + break; + + default: + break; + } + + return HAL_OK; +} +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup PCD_Private_Functions + * @{ + */ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** + * @brief Check FIFO for the next packet to be loaded. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval HAL status + */ +static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + USB_OTG_EPTypeDef *ep; + uint32_t len; + uint32_t len32b; + uint32_t fifoemptymsk; + + ep = &hpcd->IN_ep[epnum]; + + if (ep->xfer_count > ep->xfer_len) + { + return HAL_ERROR; + } + + len = ep->xfer_len - ep->xfer_count; + + if (len > ep->maxpacket) + { + len = ep->maxpacket; + } + + len32b = (len + 3U) / 4U; + + while (((USBx_INEP(epnum)->DTXFSTS & USB_OTG_DTXFSTS_INEPTFSAV) >= len32b) && + (ep->xfer_count < ep->xfer_len) && (ep->xfer_len != 0U)) + { + /* Write the FIFO */ + len = ep->xfer_len - ep->xfer_count; + + if (len > ep->maxpacket) + { + len = ep->maxpacket; + } + len32b = (len + 3U) / 4U; + + (void)USB_WritePacket(USBx, ep->xfer_buff, (uint8_t)epnum, (uint16_t)len, + (uint8_t)hpcd->Init.dma_enable); + + ep->xfer_buff += len; + ep->xfer_count += len; + } + + if (ep->xfer_len <= ep->xfer_count) + { + fifoemptymsk = (uint32_t)(0x1UL << (epnum & EP_ADDR_MSK)); + USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk; + } + + return HAL_OK; +} + + +/** + * @brief process EP OUT transfer complete interrupt. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval HAL status + */ +static HAL_StatusTypeDef PCD_EP_OutXfrComplete_int(PCD_HandleTypeDef *hpcd, uint32_t epnum) +{ + USB_OTG_EPTypeDef *ep; + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t gSNPSiD = *(__IO uint32_t *)(&USBx->CID + 0x1U); + uint32_t DoepintReg = USBx_OUTEP(epnum)->DOEPINT; + + if (hpcd->Init.dma_enable == 1U) + { + if ((DoepintReg & USB_OTG_DOEPINT_STUP) == USB_OTG_DOEPINT_STUP) /* Class C */ + { + /* StupPktRcvd = 1 this is a setup packet */ + if ((gSNPSiD > USB_OTG_CORE_ID_300A) && + ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX)) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); + } + } + else if ((DoepintReg & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR) /* Class E */ + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPSPR); + } + else if ((DoepintReg & (USB_OTG_DOEPINT_STUP | USB_OTG_DOEPINT_OTEPSPR)) == 0U) + { + /* StupPktRcvd = 1 this is a setup packet */ + if ((gSNPSiD > USB_OTG_CORE_ID_300A) && + ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX)) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); + } + else + { + ep = &hpcd->OUT_ep[epnum]; + + /* out data packet received over EP */ + ep->xfer_count = ep->xfer_size - (USBx_OUTEP(epnum)->DOEPTSIZ & USB_OTG_DOEPTSIZ_XFRSIZ); + + if (epnum == 0U) + { + if (ep->xfer_len == 0U) + { + /* this is ZLP, so prepare EP0 for next setup */ + (void)USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup); + } + else + { + ep->xfer_buff += ep->xfer_count; + } + } + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataOutStageCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_DataOutStageCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + } + else + { + /* ... */ + } + } + else + { + if (gSNPSiD == USB_OTG_CORE_ID_310A) + { + /* StupPktRcvd = 1 this is a setup packet */ + if ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); + } + else + { + if ((DoepintReg & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPSPR); + } + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataOutStageCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_DataOutStageCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + } + else + { + if ((epnum == 0U) && (hpcd->OUT_ep[epnum].xfer_len == 0U)) + { + /* this is ZLP, so prepare EP0 for next setup */ + (void)USB_EP0_OutStart(hpcd->Instance, 0U, (uint8_t *)hpcd->Setup); + } + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataOutStageCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_DataOutStageCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + } + + return HAL_OK; +} + + +/** + * @brief process EP OUT setup packet received interrupt. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval HAL status + */ +static HAL_StatusTypeDef PCD_EP_OutSetupPacket_int(PCD_HandleTypeDef *hpcd, uint32_t epnum) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t gSNPSiD = *(__IO uint32_t *)(&USBx->CID + 0x1U); + uint32_t DoepintReg = USBx_OUTEP(epnum)->DOEPINT; + + if ((gSNPSiD > USB_OTG_CORE_ID_300A) && + ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX)) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); + } + + /* Inform the upper layer that a setup packet is available */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SetupStageCallback(hpcd); +#else + HAL_PCD_SetupStageCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + if ((gSNPSiD > USB_OTG_CORE_ID_300A) && (hpcd->Init.dma_enable == 1U)) + { + (void)USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup); + } + + return HAL_OK; +} +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + + +/** + * @} + */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +#endif /* HAL_PCD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/Drivers/stm32f4xx_hal_pcd.h b/libs/hal/stm32f4xx_hal_pcd.h similarity index 97% rename from Drivers/stm32f4xx_hal_pcd.h rename to libs/hal/stm32f4xx_hal_pcd.h index a9f0c5b..92488b2 100644 --- a/Drivers/stm32f4xx_hal_pcd.h +++ b/libs/hal/stm32f4xx_hal_pcd.h @@ -1,459 +1,459 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_pcd.h - * @author MCD Application Team - * @brief Header file of PCD HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_PCD_H -#define STM32F4xx_HAL_PCD_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_usb.h" - -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup PCD - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup PCD_Exported_Types PCD Exported Types - * @{ - */ - -/** - * @brief PCD State structure definition - */ -typedef enum -{ - HAL_PCD_STATE_RESET = 0x00, - HAL_PCD_STATE_READY = 0x01, - HAL_PCD_STATE_ERROR = 0x02, - HAL_PCD_STATE_BUSY = 0x03, - HAL_PCD_STATE_TIMEOUT = 0x04 -} PCD_StateTypeDef; - -/* Device LPM suspend state */ -typedef enum -{ - LPM_L0 = 0x00, /* on */ - LPM_L1 = 0x01, /* LPM L1 sleep */ - LPM_L2 = 0x02, /* suspend */ - LPM_L3 = 0x03, /* off */ -} PCD_LPM_StateTypeDef; - -typedef enum -{ - PCD_LPM_L0_ACTIVE = 0x00, /* on */ - PCD_LPM_L1_ACTIVE = 0x01, /* LPM L1 sleep */ -} PCD_LPM_MsgTypeDef; - -typedef enum -{ - PCD_BCD_ERROR = 0xFF, - PCD_BCD_CONTACT_DETECTION = 0xFE, - PCD_BCD_STD_DOWNSTREAM_PORT = 0xFD, - PCD_BCD_CHARGING_DOWNSTREAM_PORT = 0xFC, - PCD_BCD_DEDICATED_CHARGING_PORT = 0xFB, - PCD_BCD_DISCOVERY_COMPLETED = 0x00, - -} PCD_BCD_MsgTypeDef; - -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -typedef USB_OTG_GlobalTypeDef PCD_TypeDef; -typedef USB_OTG_CfgTypeDef PCD_InitTypeDef; -typedef USB_OTG_EPTypeDef PCD_EPTypeDef; -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - -/** - * @brief PCD Handle Structure definition - */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) -typedef struct __PCD_HandleTypeDef -#else -typedef struct -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ -{ - PCD_TypeDef *Instance; /*!< Register base address */ - PCD_InitTypeDef Init; /*!< PCD required parameters */ - __IO uint8_t USB_Address; /*!< USB Address */ - PCD_EPTypeDef IN_ep[16]; /*!< IN endpoint parameters */ - PCD_EPTypeDef OUT_ep[16]; /*!< OUT endpoint parameters */ - HAL_LockTypeDef Lock; /*!< PCD peripheral status */ - __IO PCD_StateTypeDef State; /*!< PCD communication state */ - __IO uint32_t ErrorCode; /*!< PCD Error code */ - uint32_t Setup[12]; /*!< Setup packet buffer */ - PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */ - uint32_t BESL; - uint32_t FrameNumber; /*!< Store Current Frame number */ - - - uint32_t lpm_active; /*!< Enable or disable the Link Power Management . - This parameter can be set to ENABLE or DISABLE */ - - uint32_t battery_charging_active; /*!< Enable or disable Battery charging. - This parameter can be set to ENABLE or DISABLE */ - void *pData; /*!< Pointer to upper stack Handler */ - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - void (* SOFCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD SOF callback */ - void (* SetupStageCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Setup Stage callback */ - void (* ResetCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Reset callback */ - void (* SuspendCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Suspend callback */ - void (* ResumeCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Resume callback */ - void (* ConnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Connect callback */ - void (* DisconnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Disconnect callback */ - - void (* DataOutStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data OUT Stage callback */ - void (* DataInStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data IN Stage callback */ - void (* ISOOUTIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO OUT Incomplete callback */ - void (* ISOINIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO IN Incomplete callback */ - void (* BCDCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< USB OTG PCD BCD callback */ - void (* LPMCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< USB OTG PCD LPM callback */ - - void (* MspInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp Init callback */ - void (* MspDeInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp DeInit callback */ -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ -} PCD_HandleTypeDef; - -/** - * @} - */ - -/* Include PCD HAL Extended module */ -#include "stm32f4xx_hal_pcd_ex.h" - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup PCD_Exported_Constants PCD Exported Constants - * @{ - */ - -/** @defgroup PCD_Speed PCD Speed - * @{ - */ -#define PCD_SPEED_HIGH USBD_HS_SPEED -#define PCD_SPEED_HIGH_IN_FULL USBD_HSINFS_SPEED -#define PCD_SPEED_FULL USBD_FS_SPEED -/** - * @} - */ - -/** @defgroup PCD_PHY_Module PCD PHY Module - * @{ - */ -#define PCD_PHY_ULPI 1U -#define PCD_PHY_EMBEDDED 2U -#define PCD_PHY_UTMI 3U -/** - * @} - */ - -/** @defgroup PCD_Error_Code_definition PCD Error Code definition - * @brief PCD Error Code definition - * @{ - */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) -#define HAL_PCD_ERROR_INVALID_CALLBACK (0x00000010U) /*!< Invalid Callback error */ -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup PCD_Exported_Macros PCD Exported Macros - * @brief macros to handle interrupts and specific clock configurations - * @{ - */ -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -#define __HAL_PCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance) -#define __HAL_PCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance) - -#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) \ - ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__)) - -#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) &= (__INTERRUPT__)) -#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U) - -#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) \ - *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= ~(USB_OTG_PCGCCTL_STOPCLK) - -#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) \ - *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK - -#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) \ - ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE)) & 0x10U) - -#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= (USB_OTG_HS_WAKEUP_EXTI_LINE) -#define __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE) -#define __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_HS_WAKEUP_EXTI_LINE) -#define __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = (USB_OTG_HS_WAKEUP_EXTI_LINE) - -#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE() \ - do { \ - EXTI->FTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE); \ - EXTI->RTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE; \ - } while(0U) -#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_OTG_FS_WAKEUP_EXTI_LINE -#define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE) -#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_FS_WAKEUP_EXTI_LINE) -#define __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = USB_OTG_FS_WAKEUP_EXTI_LINE - -#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE() \ - do { \ - EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE); \ - EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE; \ - } while(0U) -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup PCD_Exported_Functions PCD Exported Functions - * @{ - */ - -/* Initialization/de-initialization functions ********************************/ -/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ -HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd); -void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd); -void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd); - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) -/** @defgroup HAL_PCD_Callback_ID_enumeration_definition HAL USB OTG PCD Callback ID enumeration definition - * @brief HAL USB OTG PCD Callback ID enumeration definition - * @{ - */ -typedef enum -{ - HAL_PCD_SOF_CB_ID = 0x01, /*!< USB PCD SOF callback ID */ - HAL_PCD_SETUPSTAGE_CB_ID = 0x02, /*!< USB PCD Setup Stage callback ID */ - HAL_PCD_RESET_CB_ID = 0x03, /*!< USB PCD Reset callback ID */ - HAL_PCD_SUSPEND_CB_ID = 0x04, /*!< USB PCD Suspend callback ID */ - HAL_PCD_RESUME_CB_ID = 0x05, /*!< USB PCD Resume callback ID */ - HAL_PCD_CONNECT_CB_ID = 0x06, /*!< USB PCD Connect callback ID */ - HAL_PCD_DISCONNECT_CB_ID = 0x07, /*!< USB PCD Disconnect callback ID */ - - HAL_PCD_MSPINIT_CB_ID = 0x08, /*!< USB PCD MspInit callback ID */ - HAL_PCD_MSPDEINIT_CB_ID = 0x09 /*!< USB PCD MspDeInit callback ID */ - -} HAL_PCD_CallbackIDTypeDef; -/** - * @} - */ - -/** @defgroup HAL_PCD_Callback_pointer_definition HAL USB OTG PCD Callback pointer definition - * @brief HAL USB OTG PCD Callback pointer definition - * @{ - */ - -typedef void (*pPCD_CallbackTypeDef)(PCD_HandleTypeDef *hpcd); /*!< pointer to a common USB OTG PCD callback function */ -typedef void (*pPCD_DataOutStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data OUT Stage callback */ -typedef void (*pPCD_DataInStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data IN Stage callback */ -typedef void (*pPCD_IsoOutIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO OUT Incomplete callback */ -typedef void (*pPCD_IsoInIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO IN Incomplete callback */ -typedef void (*pPCD_LpmCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< pointer to USB OTG PCD LPM callback */ -typedef void (*pPCD_BcdCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< pointer to USB OTG PCD BCD callback */ - -/** - * @} - */ - -HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID, - pPCD_CallbackTypeDef pCallback); - -HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID); - -HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, - pPCD_DataOutStageCallbackTypeDef pCallback); - -HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd); - -HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, - pPCD_DataInStageCallbackTypeDef pCallback); - -HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd); - -HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, - pPCD_IsoOutIncpltCallbackTypeDef pCallback); - -HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd); - -HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, - pPCD_IsoInIncpltCallbackTypeDef pCallback); - -HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd); - -HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, pPCD_BcdCallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd); - -HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, pPCD_LpmCallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ -/** - * @} - */ - -/* I/O operation functions ***************************************************/ -/* Non-Blocking mode: Interrupt */ -/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions - * @{ - */ -HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd); -void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd); -void HAL_PCD_WKUP_IRQHandler(PCD_HandleTypeDef *hpcd); - -void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd); - -void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); -void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); -void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); -void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); -/** - * @} - */ - -/* Peripheral Control functions **********************************************/ -/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions - * @{ - */ -HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address); -HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type); -HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); -HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); -HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -HAL_StatusTypeDef HAL_PCD_EP_Abort(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_SetTestMode(PCD_HandleTypeDef *hpcd, uint8_t testmode); - -uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -/** - * @} - */ - -/* Peripheral State functions ************************************************/ -/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions - * @{ - */ -PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); -/** - * @} - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup PCD_Private_Constants PCD Private Constants - * @{ - */ -/** @defgroup USB_EXTI_Line_Interrupt USB EXTI line interrupt - * @{ - */ -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -#define USB_OTG_FS_WAKEUP_EXTI_LINE (0x1U << 18) /*!< USB FS EXTI Line WakeUp Interrupt */ -#define USB_OTG_HS_WAKEUP_EXTI_LINE (0x1U << 20) /*!< USB HS EXTI Line WakeUp Interrupt */ -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - - -/** - * @} - */ -/** - * @} - */ - -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -#ifndef USB_OTG_DOEPINT_OTEPSPR -#define USB_OTG_DOEPINT_OTEPSPR (0x1UL << 5) /*!< Status Phase Received interrupt */ -#endif /* defined USB_OTG_DOEPINT_OTEPSPR */ - -#ifndef USB_OTG_DOEPMSK_OTEPSPRM -#define USB_OTG_DOEPMSK_OTEPSPRM (0x1UL << 5) /*!< Setup Packet Received interrupt mask */ -#endif /* defined USB_OTG_DOEPMSK_OTEPSPRM */ - -#ifndef USB_OTG_DOEPINT_NAK -#define USB_OTG_DOEPINT_NAK (0x1UL << 13) /*!< NAK interrupt */ -#endif /* defined USB_OTG_DOEPINT_NAK */ - -#ifndef USB_OTG_DOEPMSK_NAKM -#define USB_OTG_DOEPMSK_NAKM (0x1UL << 13) /*!< OUT Packet NAK interrupt mask */ -#endif /* defined USB_OTG_DOEPMSK_NAKM */ - -#ifndef USB_OTG_DOEPINT_STPKTRX -#define USB_OTG_DOEPINT_STPKTRX (0x1UL << 15) /*!< Setup Packet Received interrupt */ -#endif /* defined USB_OTG_DOEPINT_STPKTRX */ - -#ifndef USB_OTG_DOEPMSK_NYETM -#define USB_OTG_DOEPMSK_NYETM (0x1UL << 14) /*!< Setup Packet Received interrupt mask */ -#endif /* defined USB_OTG_DOEPMSK_NYETM */ -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup PCD_Private_Macros PCD Private Macros - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F4xx_HAL_PCD_H */ +/** + ****************************************************************************** + * @file stm32f4xx_hal_pcd.h + * @author MCD Application Team + * @brief Header file of PCD HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F4xx_HAL_PCD_H +#define STM32F4xx_HAL_PCD_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_ll_usb.h" + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup PCD + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup PCD_Exported_Types PCD Exported Types + * @{ + */ + +/** + * @brief PCD State structure definition + */ +typedef enum +{ + HAL_PCD_STATE_RESET = 0x00, + HAL_PCD_STATE_READY = 0x01, + HAL_PCD_STATE_ERROR = 0x02, + HAL_PCD_STATE_BUSY = 0x03, + HAL_PCD_STATE_TIMEOUT = 0x04 +} PCD_StateTypeDef; + +/* Device LPM suspend state */ +typedef enum +{ + LPM_L0 = 0x00, /* on */ + LPM_L1 = 0x01, /* LPM L1 sleep */ + LPM_L2 = 0x02, /* suspend */ + LPM_L3 = 0x03, /* off */ +} PCD_LPM_StateTypeDef; + +typedef enum +{ + PCD_LPM_L0_ACTIVE = 0x00, /* on */ + PCD_LPM_L1_ACTIVE = 0x01, /* LPM L1 sleep */ +} PCD_LPM_MsgTypeDef; + +typedef enum +{ + PCD_BCD_ERROR = 0xFF, + PCD_BCD_CONTACT_DETECTION = 0xFE, + PCD_BCD_STD_DOWNSTREAM_PORT = 0xFD, + PCD_BCD_CHARGING_DOWNSTREAM_PORT = 0xFC, + PCD_BCD_DEDICATED_CHARGING_PORT = 0xFB, + PCD_BCD_DISCOVERY_COMPLETED = 0x00, + +} PCD_BCD_MsgTypeDef; + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +typedef USB_OTG_GlobalTypeDef PCD_TypeDef; +typedef USB_OTG_CfgTypeDef PCD_InitTypeDef; +typedef USB_OTG_EPTypeDef PCD_EPTypeDef; +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +/** + * @brief PCD Handle Structure definition + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +typedef struct __PCD_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + PCD_TypeDef *Instance; /*!< Register base address */ + PCD_InitTypeDef Init; /*!< PCD required parameters */ + __IO uint8_t USB_Address; /*!< USB Address */ + PCD_EPTypeDef IN_ep[16]; /*!< IN endpoint parameters */ + PCD_EPTypeDef OUT_ep[16]; /*!< OUT endpoint parameters */ + HAL_LockTypeDef Lock; /*!< PCD peripheral status */ + __IO PCD_StateTypeDef State; /*!< PCD communication state */ + __IO uint32_t ErrorCode; /*!< PCD Error code */ + uint32_t Setup[12]; /*!< Setup packet buffer */ + PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */ + uint32_t BESL; + uint32_t FrameNumber; /*!< Store Current Frame number */ + + + uint32_t lpm_active; /*!< Enable or disable the Link Power Management . + This parameter can be set to ENABLE or DISABLE */ + + uint32_t battery_charging_active; /*!< Enable or disable Battery charging. + This parameter can be set to ENABLE or DISABLE */ + void *pData; /*!< Pointer to upper stack Handler */ + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + void (* SOFCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD SOF callback */ + void (* SetupStageCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Setup Stage callback */ + void (* ResetCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Reset callback */ + void (* SuspendCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Suspend callback */ + void (* ResumeCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Resume callback */ + void (* ConnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Connect callback */ + void (* DisconnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Disconnect callback */ + + void (* DataOutStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data OUT Stage callback */ + void (* DataInStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data IN Stage callback */ + void (* ISOOUTIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO OUT Incomplete callback */ + void (* ISOINIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO IN Incomplete callback */ + void (* BCDCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< USB OTG PCD BCD callback */ + void (* LPMCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< USB OTG PCD LPM callback */ + + void (* MspInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp Init callback */ + void (* MspDeInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp DeInit callback */ +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +} PCD_HandleTypeDef; + +/** + * @} + */ + +/* Include PCD HAL Extended module */ +#include "stm32f4xx_hal_pcd_ex.h" + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PCD_Exported_Constants PCD Exported Constants + * @{ + */ + +/** @defgroup PCD_Speed PCD Speed + * @{ + */ +#define PCD_SPEED_HIGH USBD_HS_SPEED +#define PCD_SPEED_HIGH_IN_FULL USBD_HSINFS_SPEED +#define PCD_SPEED_FULL USBD_FS_SPEED +/** + * @} + */ + +/** @defgroup PCD_PHY_Module PCD PHY Module + * @{ + */ +#define PCD_PHY_ULPI 1U +#define PCD_PHY_EMBEDDED 2U +#define PCD_PHY_UTMI 3U +/** + * @} + */ + +/** @defgroup PCD_Error_Code_definition PCD Error Code definition + * @brief PCD Error Code definition + * @{ + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +#define HAL_PCD_ERROR_INVALID_CALLBACK (0x00000010U) /*!< Invalid Callback error */ +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup PCD_Exported_Macros PCD Exported Macros + * @brief macros to handle interrupts and specific clock configurations + * @{ + */ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +#define __HAL_PCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance) +#define __HAL_PCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance) + +#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) \ + ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__)) + +#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) &= (__INTERRUPT__)) +#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U) + +#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) \ + *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= ~(USB_OTG_PCGCCTL_STOPCLK) + +#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) \ + *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK + +#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) \ + ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE)) & 0x10U) + +#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= (USB_OTG_HS_WAKEUP_EXTI_LINE) +#define __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE) +#define __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_HS_WAKEUP_EXTI_LINE) +#define __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = (USB_OTG_HS_WAKEUP_EXTI_LINE) + +#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE() \ + do { \ + EXTI->FTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE); \ + EXTI->RTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE; \ + } while(0U) +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_OTG_FS_WAKEUP_EXTI_LINE +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE) +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_FS_WAKEUP_EXTI_LINE) +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = USB_OTG_FS_WAKEUP_EXTI_LINE + +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE() \ + do { \ + EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE); \ + EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE; \ + } while(0U) +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PCD_Exported_Functions PCD Exported Functions + * @{ + */ + +/* Initialization/de-initialization functions ********************************/ +/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd); +void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd); +void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +/** @defgroup HAL_PCD_Callback_ID_enumeration_definition HAL USB OTG PCD Callback ID enumeration definition + * @brief HAL USB OTG PCD Callback ID enumeration definition + * @{ + */ +typedef enum +{ + HAL_PCD_SOF_CB_ID = 0x01, /*!< USB PCD SOF callback ID */ + HAL_PCD_SETUPSTAGE_CB_ID = 0x02, /*!< USB PCD Setup Stage callback ID */ + HAL_PCD_RESET_CB_ID = 0x03, /*!< USB PCD Reset callback ID */ + HAL_PCD_SUSPEND_CB_ID = 0x04, /*!< USB PCD Suspend callback ID */ + HAL_PCD_RESUME_CB_ID = 0x05, /*!< USB PCD Resume callback ID */ + HAL_PCD_CONNECT_CB_ID = 0x06, /*!< USB PCD Connect callback ID */ + HAL_PCD_DISCONNECT_CB_ID = 0x07, /*!< USB PCD Disconnect callback ID */ + + HAL_PCD_MSPINIT_CB_ID = 0x08, /*!< USB PCD MspInit callback ID */ + HAL_PCD_MSPDEINIT_CB_ID = 0x09 /*!< USB PCD MspDeInit callback ID */ + +} HAL_PCD_CallbackIDTypeDef; +/** + * @} + */ + +/** @defgroup HAL_PCD_Callback_pointer_definition HAL USB OTG PCD Callback pointer definition + * @brief HAL USB OTG PCD Callback pointer definition + * @{ + */ + +typedef void (*pPCD_CallbackTypeDef)(PCD_HandleTypeDef *hpcd); /*!< pointer to a common USB OTG PCD callback function */ +typedef void (*pPCD_DataOutStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data OUT Stage callback */ +typedef void (*pPCD_DataInStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data IN Stage callback */ +typedef void (*pPCD_IsoOutIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO OUT Incomplete callback */ +typedef void (*pPCD_IsoInIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO IN Incomplete callback */ +typedef void (*pPCD_LpmCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< pointer to USB OTG PCD LPM callback */ +typedef void (*pPCD_BcdCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< pointer to USB OTG PCD BCD callback */ + +/** + * @} + */ + +HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID, + pPCD_CallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataOutStageCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataInStageCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoOutIncpltCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoInIncpltCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, pPCD_BcdCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, pPCD_LpmCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* I/O operation functions ***************************************************/ +/* Non-Blocking mode: Interrupt */ +/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd); +void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd); +void HAL_PCD_WKUP_IRQHandler(PCD_HandleTypeDef *hpcd); + +void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd); + +void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +/** + * @} + */ + +/* Peripheral Control functions **********************************************/ +/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address); +HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type); +HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); +HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); +HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_Abort(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_SetTestMode(PCD_HandleTypeDef *hpcd, uint8_t testmode); + +uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +/** + * @} + */ + +/* Peripheral State functions ************************************************/ +/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions + * @{ + */ +PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup PCD_Private_Constants PCD Private Constants + * @{ + */ +/** @defgroup USB_EXTI_Line_Interrupt USB EXTI line interrupt + * @{ + */ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +#define USB_OTG_FS_WAKEUP_EXTI_LINE (0x1U << 18) /*!< USB FS EXTI Line WakeUp Interrupt */ +#define USB_OTG_HS_WAKEUP_EXTI_LINE (0x1U << 20) /*!< USB HS EXTI Line WakeUp Interrupt */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + + +/** + * @} + */ +/** + * @} + */ + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +#ifndef USB_OTG_DOEPINT_OTEPSPR +#define USB_OTG_DOEPINT_OTEPSPR (0x1UL << 5) /*!< Status Phase Received interrupt */ +#endif /* defined USB_OTG_DOEPINT_OTEPSPR */ + +#ifndef USB_OTG_DOEPMSK_OTEPSPRM +#define USB_OTG_DOEPMSK_OTEPSPRM (0x1UL << 5) /*!< Setup Packet Received interrupt mask */ +#endif /* defined USB_OTG_DOEPMSK_OTEPSPRM */ + +#ifndef USB_OTG_DOEPINT_NAK +#define USB_OTG_DOEPINT_NAK (0x1UL << 13) /*!< NAK interrupt */ +#endif /* defined USB_OTG_DOEPINT_NAK */ + +#ifndef USB_OTG_DOEPMSK_NAKM +#define USB_OTG_DOEPMSK_NAKM (0x1UL << 13) /*!< OUT Packet NAK interrupt mask */ +#endif /* defined USB_OTG_DOEPMSK_NAKM */ + +#ifndef USB_OTG_DOEPINT_STPKTRX +#define USB_OTG_DOEPINT_STPKTRX (0x1UL << 15) /*!< Setup Packet Received interrupt */ +#endif /* defined USB_OTG_DOEPINT_STPKTRX */ + +#ifndef USB_OTG_DOEPMSK_NYETM +#define USB_OTG_DOEPMSK_NYETM (0x1UL << 14) /*!< Setup Packet Received interrupt mask */ +#endif /* defined USB_OTG_DOEPMSK_NYETM */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PCD_Private_Macros PCD Private Macros + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F4xx_HAL_PCD_H */ diff --git a/Drivers/stm32f4xx_hal_pcd_ex.c b/libs/hal/stm32f4xx_hal_pcd_ex.c similarity index 96% rename from Drivers/stm32f4xx_hal_pcd_ex.c rename to libs/hal/stm32f4xx_hal_pcd_ex.c index 07fcf73..292faf1 100644 --- a/Drivers/stm32f4xx_hal_pcd_ex.c +++ b/libs/hal/stm32f4xx_hal_pcd_ex.c @@ -1,341 +1,341 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_pcd_ex.c - * @author MCD Application Team - * @brief PCD Extended HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the USB Peripheral Controller: - * + Extended features functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup PCDEx PCDEx - * @brief PCD Extended HAL module driver - * @{ - */ - -#ifdef HAL_PCD_MODULE_ENABLED - -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions - * @{ - */ - -/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions - * @brief PCDEx control functions - * -@verbatim - =============================================================================== - ##### Extended features functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Update FIFO configuration - -@endverbatim - * @{ - */ -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -/** - * @brief Set Tx FIFO - * @param hpcd PCD handle - * @param fifo The number of Tx fifo - * @param size Fifo size - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size) -{ - uint8_t i; - uint32_t Tx_Offset; - - /* TXn min size = 16 words. (n : Transmit FIFO index) - When a TxFIFO is not used, the Configuration should be as follows: - case 1 : n > m and Txn is not used (n,m : Transmit FIFO indexes) - --> Txm can use the space allocated for Txn. - case2 : n < m and Txn is not used (n,m : Transmit FIFO indexes) - --> Txn should be configured with the minimum space of 16 words - The FIFO is used optimally when used TxFIFOs are allocated in the top - of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones. - When DMA is used 3n * FIFO locations should be reserved for internal DMA registers */ - - Tx_Offset = hpcd->Instance->GRXFSIZ; - - if (fifo == 0U) - { - hpcd->Instance->DIEPTXF0_HNPTXFSIZ = ((uint32_t)size << 16) | Tx_Offset; - } - else - { - Tx_Offset += (hpcd->Instance->DIEPTXF0_HNPTXFSIZ) >> 16; - for (i = 0U; i < (fifo - 1U); i++) - { - Tx_Offset += (hpcd->Instance->DIEPTXF[i] >> 16); - } - - /* Multiply Tx_Size by 2 to get higher performance */ - hpcd->Instance->DIEPTXF[fifo - 1U] = ((uint32_t)size << 16) | Tx_Offset; - } - - return HAL_OK; -} - -/** - * @brief Set Rx FIFO - * @param hpcd PCD handle - * @param size Size of Rx fifo - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size) -{ - hpcd->Instance->GRXFSIZ = size; - - return HAL_OK; -} -#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief Activate LPM feature. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd) -{ - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - - hpcd->lpm_active = 1U; - hpcd->LPM_State = LPM_L0; - USBx->GINTMSK |= USB_OTG_GINTMSK_LPMINTM; - USBx->GLPMCFG |= (USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL); - - return HAL_OK; -} - -/** - * @brief Deactivate LPM feature. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd) -{ - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - - hpcd->lpm_active = 0U; - USBx->GINTMSK &= ~USB_OTG_GINTMSK_LPMINTM; - USBx->GLPMCFG &= ~(USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL); - - return HAL_OK; -} -#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief Handle BatteryCharging Process. - * @param hpcd PCD handle - * @retval HAL status - */ -void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd) -{ - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - uint32_t tickstart = HAL_GetTick(); - - /* Enable DCD : Data Contact Detect */ - USBx->GCCFG |= USB_OTG_GCCFG_DCDEN; - - /* Wait for Min DCD Timeout */ - HAL_Delay(300U); - - /* Check Detect flag */ - if ((USBx->GCCFG & USB_OTG_GCCFG_DCDET) == USB_OTG_GCCFG_DCDET) - { -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->BCDCallback(hpcd, PCD_BCD_CONTACT_DETECTION); -#else - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CONTACT_DETECTION); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - - /* Primary detection: checks if connected to Standard Downstream Port - (without charging capability) */ - USBx->GCCFG &= ~ USB_OTG_GCCFG_DCDEN; - HAL_Delay(50U); - USBx->GCCFG |= USB_OTG_GCCFG_PDEN; - HAL_Delay(50U); - - if ((USBx->GCCFG & USB_OTG_GCCFG_PDET) == 0U) - { - /* Case of Standard Downstream Port */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->BCDCallback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT); -#else - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - else - { - /* start secondary detection to check connection to Charging Downstream - Port or Dedicated Charging Port */ - USBx->GCCFG &= ~ USB_OTG_GCCFG_PDEN; - HAL_Delay(50U); - USBx->GCCFG |= USB_OTG_GCCFG_SDEN; - HAL_Delay(50U); - - if ((USBx->GCCFG & USB_OTG_GCCFG_SDET) == USB_OTG_GCCFG_SDET) - { - /* case Dedicated Charging Port */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->BCDCallback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT); -#else - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - else - { - /* case Charging Downstream Port */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->BCDCallback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT); -#else - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - } - - /* Battery Charging capability discovery finished */ - (void)HAL_PCDEx_DeActivateBCD(hpcd); - - /* Check for the Timeout, else start USB Device */ - if ((HAL_GetTick() - tickstart) > 1000U) - { -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->BCDCallback(hpcd, PCD_BCD_ERROR); -#else - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_ERROR); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - else - { -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->BCDCallback(hpcd, PCD_BCD_DISCOVERY_COMPLETED); -#else - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DISCOVERY_COMPLETED); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } -} - -/** - * @brief Activate BatteryCharging feature. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd) -{ - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - - USBx->GCCFG &= ~(USB_OTG_GCCFG_PDEN); - USBx->GCCFG &= ~(USB_OTG_GCCFG_SDEN); - - /* Power Down USB transceiver */ - USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); - - /* Enable Battery charging */ - USBx->GCCFG |= USB_OTG_GCCFG_BCDEN; - - hpcd->battery_charging_active = 1U; - - return HAL_OK; -} - -/** - * @brief Deactivate BatteryCharging feature. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd) -{ - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - - USBx->GCCFG &= ~(USB_OTG_GCCFG_SDEN); - USBx->GCCFG &= ~(USB_OTG_GCCFG_PDEN); - - /* Disable Battery charging */ - USBx->GCCFG &= ~(USB_OTG_GCCFG_BCDEN); - - hpcd->battery_charging_active = 0U; - - return HAL_OK; -} -#endif /* defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - -/** - * @brief Send LPM message to user layer callback. - * @param hpcd PCD handle - * @param msg LPM message - * @retval HAL status - */ -__weak void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(msg); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCDEx_LPM_Callback could be implemented in the user file - */ -} - -/** - * @brief Send BatteryCharging message to user layer callback. - * @param hpcd PCD handle - * @param msg LPM message - * @retval HAL status - */ -__weak void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(msg); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCDEx_BCD_Callback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** - * @} - */ -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ -#endif /* HAL_PCD_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ +/** + ****************************************************************************** + * @file stm32f4xx_hal_pcd_ex.c + * @author MCD Application Team + * @brief PCD Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Extended features functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup PCDEx PCDEx + * @brief PCD Extended HAL module driver + * @{ + */ + +#ifdef HAL_PCD_MODULE_ENABLED + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions + * @{ + */ + +/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions + * @brief PCDEx control functions + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Update FIFO configuration + +@endverbatim + * @{ + */ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** + * @brief Set Tx FIFO + * @param hpcd PCD handle + * @param fifo The number of Tx fifo + * @param size Fifo size + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size) +{ + uint8_t i; + uint32_t Tx_Offset; + + /* TXn min size = 16 words. (n : Transmit FIFO index) + When a TxFIFO is not used, the Configuration should be as follows: + case 1 : n > m and Txn is not used (n,m : Transmit FIFO indexes) + --> Txm can use the space allocated for Txn. + case2 : n < m and Txn is not used (n,m : Transmit FIFO indexes) + --> Txn should be configured with the minimum space of 16 words + The FIFO is used optimally when used TxFIFOs are allocated in the top + of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones. + When DMA is used 3n * FIFO locations should be reserved for internal DMA registers */ + + Tx_Offset = hpcd->Instance->GRXFSIZ; + + if (fifo == 0U) + { + hpcd->Instance->DIEPTXF0_HNPTXFSIZ = ((uint32_t)size << 16) | Tx_Offset; + } + else + { + Tx_Offset += (hpcd->Instance->DIEPTXF0_HNPTXFSIZ) >> 16; + for (i = 0U; i < (fifo - 1U); i++) + { + Tx_Offset += (hpcd->Instance->DIEPTXF[i] >> 16); + } + + /* Multiply Tx_Size by 2 to get higher performance */ + hpcd->Instance->DIEPTXF[fifo - 1U] = ((uint32_t)size << 16) | Tx_Offset; + } + + return HAL_OK; +} + +/** + * @brief Set Rx FIFO + * @param hpcd PCD handle + * @param size Size of Rx fifo + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size) +{ + hpcd->Instance->GRXFSIZ = size; + + return HAL_OK; +} +#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +/** + * @brief Activate LPM feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + hpcd->lpm_active = 1U; + hpcd->LPM_State = LPM_L0; + USBx->GINTMSK |= USB_OTG_GINTMSK_LPMINTM; + USBx->GLPMCFG |= (USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL); + + return HAL_OK; +} + +/** + * @brief Deactivate LPM feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + hpcd->lpm_active = 0U; + USBx->GINTMSK &= ~USB_OTG_GINTMSK_LPMINTM; + USBx->GLPMCFG &= ~(USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL); + + return HAL_OK; +} +#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ +#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +/** + * @brief Handle BatteryCharging Process. + * @param hpcd PCD handle + * @retval HAL status + */ +void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t tickstart = HAL_GetTick(); + + /* Enable DCD : Data Contact Detect */ + USBx->GCCFG |= USB_OTG_GCCFG_DCDEN; + + /* Wait for Min DCD Timeout */ + HAL_Delay(300U); + + /* Check Detect flag */ + if ((USBx->GCCFG & USB_OTG_GCCFG_DCDET) == USB_OTG_GCCFG_DCDET) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_CONTACT_DETECTION); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CONTACT_DETECTION); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + /* Primary detection: checks if connected to Standard Downstream Port + (without charging capability) */ + USBx->GCCFG &= ~ USB_OTG_GCCFG_DCDEN; + HAL_Delay(50U); + USBx->GCCFG |= USB_OTG_GCCFG_PDEN; + HAL_Delay(50U); + + if ((USBx->GCCFG & USB_OTG_GCCFG_PDET) == 0U) + { + /* Case of Standard Downstream Port */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { + /* start secondary detection to check connection to Charging Downstream + Port or Dedicated Charging Port */ + USBx->GCCFG &= ~ USB_OTG_GCCFG_PDEN; + HAL_Delay(50U); + USBx->GCCFG |= USB_OTG_GCCFG_SDEN; + HAL_Delay(50U); + + if ((USBx->GCCFG & USB_OTG_GCCFG_SDET) == USB_OTG_GCCFG_SDET) + { + /* case Dedicated Charging Port */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { + /* case Charging Downstream Port */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + } + + /* Battery Charging capability discovery finished */ + (void)HAL_PCDEx_DeActivateBCD(hpcd); + + /* Check for the Timeout, else start USB Device */ + if ((HAL_GetTick() - tickstart) > 1000U) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_ERROR); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_ERROR); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_DISCOVERY_COMPLETED); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DISCOVERY_COMPLETED); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Activate BatteryCharging feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + USBx->GCCFG &= ~(USB_OTG_GCCFG_PDEN); + USBx->GCCFG &= ~(USB_OTG_GCCFG_SDEN); + + /* Power Down USB transceiver */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); + + /* Enable Battery charging */ + USBx->GCCFG |= USB_OTG_GCCFG_BCDEN; + + hpcd->battery_charging_active = 1U; + + return HAL_OK; +} + +/** + * @brief Deactivate BatteryCharging feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + USBx->GCCFG &= ~(USB_OTG_GCCFG_SDEN); + USBx->GCCFG &= ~(USB_OTG_GCCFG_PDEN); + + /* Disable Battery charging */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_BCDEN); + + hpcd->battery_charging_active = 0U; + + return HAL_OK; +} +#endif /* defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +/** + * @brief Send LPM message to user layer callback. + * @param hpcd PCD handle + * @param msg LPM message + * @retval HAL status + */ +__weak void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(msg); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCDEx_LPM_Callback could be implemented in the user file + */ +} + +/** + * @brief Send BatteryCharging message to user layer callback. + * @param hpcd PCD handle + * @param msg LPM message + * @retval HAL status + */ +__weak void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(msg); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCDEx_BCD_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +#endif /* HAL_PCD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/Drivers/stm32f4xx_hal_pcd_ex.h b/libs/hal/stm32f4xx_hal_pcd_ex.h similarity index 97% rename from Drivers/stm32f4xx_hal_pcd_ex.h rename to libs/hal/stm32f4xx_hal_pcd_ex.h index 8eab87e..72ded2b 100644 --- a/Drivers/stm32f4xx_hal_pcd_ex.h +++ b/libs/hal/stm32f4xx_hal_pcd_ex.h @@ -1,88 +1,88 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_pcd_ex.h - * @author MCD Application Team - * @brief Header file of PCD HAL Extension module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_PCD_EX_H -#define STM32F4xx_HAL_PCD_EX_H - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup PCDEx - * @{ - */ -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macros -----------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions - * @{ - */ -/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions - * @{ - */ - -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size); -HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size); -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - -#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd); -#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd); -void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd); -#endif /* defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ -void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); -void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - - -#endif /* STM32F4xx_HAL_PCD_EX_H */ +/** + ****************************************************************************** + * @file stm32f4xx_hal_pcd_ex.h + * @author MCD Application Team + * @brief Header file of PCD HAL Extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F4xx_HAL_PCD_EX_H +#define STM32F4xx_HAL_PCD_EX_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup PCDEx + * @{ + */ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions + * @{ + */ +/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions + * @{ + */ + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size); +HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size); +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd); +#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ +#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd); +void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd); +#endif /* defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ +void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); +void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + + +#endif /* STM32F4xx_HAL_PCD_EX_H */ diff --git a/Drivers/stm32f4xx_hal_pwr.c b/libs/hal/stm32f4xx_hal_pwr.c similarity index 97% rename from Drivers/stm32f4xx_hal_pwr.c rename to libs/hal/stm32f4xx_hal_pwr.c index bf60fc0..b4bb483 100644 --- a/Drivers/stm32f4xx_hal_pwr.c +++ b/libs/hal/stm32f4xx_hal_pwr.c @@ -1,571 +1,571 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_pwr.c - * @author MCD Application Team - * @brief PWR HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Power Controller (PWR) peripheral: - * + Initialization and de-initialization functions - * + Peripheral Control functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup PWR PWR - * @brief PWR HAL module driver - * @{ - */ - -#ifdef HAL_PWR_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup PWR_Private_Constants - * @{ - */ - -/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask - * @{ - */ -#define PVD_MODE_IT 0x00010000U -#define PVD_MODE_EVT 0x00020000U -#define PVD_RISING_EDGE 0x00000001U -#define PVD_FALLING_EDGE 0x00000002U -/** - * @} - */ - -/** - * @} - */ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup PWR_Exported_Functions PWR Exported Functions - * @{ - */ - -/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and de-initialization functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] - After reset, the backup domain (RTC registers, RTC backup data - registers and backup SRAM) is protected against possible unwanted - write accesses. - To enable access to the RTC Domain and RTC registers, proceed as follows: - (+) Enable the Power Controller (PWR) APB1 interface clock using the - __HAL_RCC_PWR_CLK_ENABLE() macro. - (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function. - -@endverbatim - * @{ - */ - -/** - * @brief Deinitializes the HAL PWR peripheral registers to their default reset values. - * @retval None - */ -void HAL_PWR_DeInit(void) -{ - __HAL_RCC_PWR_FORCE_RESET(); - __HAL_RCC_PWR_RELEASE_RESET(); -} - -/** - * @brief Enables access to the backup domain (RTC registers, RTC - * backup data registers and backup SRAM). - * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the - * Backup Domain Access should be kept enabled. - * @note The following sequence is required to bypass the delay between - * DBP bit programming and the effective enabling of the backup domain. - * Please check the Errata Sheet for more details under "Possible delay - * in backup domain protection disabling/enabling after programming the - * DBP bit" section. - * @retval None - */ -void HAL_PWR_EnableBkUpAccess(void) -{ - __IO uint32_t dummyread; - *(__IO uint32_t *) CR_DBP_BB = (uint32_t)ENABLE; - dummyread = PWR->CR; - UNUSED(dummyread); -} - -/** - * @brief Disables access to the backup domain (RTC registers, RTC - * backup data registers and backup SRAM). - * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the - * Backup Domain Access should be kept enabled. - * @note The following sequence is required to bypass the delay between - * DBP bit programming and the effective disabling of the backup domain. - * Please check the Errata Sheet for more details under "Possible delay - * in backup domain protection disabling/enabling after programming the - * DBP bit" section. - * @retval None - */ -void HAL_PWR_DisableBkUpAccess(void) -{ - __IO uint32_t dummyread; - *(__IO uint32_t *) CR_DBP_BB = (uint32_t)DISABLE; - dummyread = PWR->CR; - UNUSED(dummyread); -} - -/** - * @} - */ - -/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions - * @brief Low Power modes configuration functions - * -@verbatim - - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - - *** PVD configuration *** - ========================= - [..] - (+) The PVD is used to monitor the VDD power supply by comparing it to a - threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR). - (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower - than the PVD threshold. This event is internally connected to the EXTI - line16 and can generate an interrupt if enabled. This is done through - __HAL_PWR_PVD_EXTI_ENABLE_IT() macro. - (+) The PVD is stopped in Standby mode. - - *** Wake-up pin configuration *** - ================================ - [..] - (+) Wake-up pin is used to wake up the system from Standby mode. This pin is - forced in input pull-down configuration and is active on rising edges. - (+) There is one Wake-up pin: Wake-up Pin 1 on PA.00. - (++) For STM32F446xx there are two Wake-Up pins: Pin1 on PA.00 and Pin2 on PC.13 - (++) For STM32F410xx/STM32F412xx/STM32F413xx/STM32F423xx there are three Wake-Up pins: Pin1 on PA.00, Pin2 on PC.00 and Pin3 on PC.01 - - *** Low Power modes configuration *** - ===================================== - [..] - The devices feature 3 low-power modes: - (+) Sleep mode: Cortex-M4 core stopped, peripherals kept running. - (+) Stop mode: all clocks are stopped, regulator running, regulator - in low power mode - (+) Standby mode: 1.2V domain powered off. - - *** Sleep mode *** - ================== - [..] - (+) Entry: - The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI) - functions with - (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction - (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction - - -@@- The Regulator parameter is not used for the STM32F4 family - and is kept as parameter just to maintain compatibility with the - lower power families (STM32L). - (+) Exit: - Any peripheral interrupt acknowledged by the nested vectored interrupt - controller (NVIC) can wake up the device from Sleep mode. - - *** Stop mode *** - ================= - [..] - In Stop mode, all clocks in the 1.2V domain are stopped, the PLL, the HSI, - and the HSE RC oscillators are disabled. Internal SRAM and register contents - are preserved. - The voltage regulator can be configured either in normal or low-power mode. - To minimize the consumption In Stop mode, FLASH can be powered off before - entering the Stop mode using the HAL_PWREx_EnableFlashPowerDown() function. - It can be switched on again by software after exiting the Stop mode using - the HAL_PWREx_DisableFlashPowerDown() function. - - (+) Entry: - The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON) - function with: - (++) Main regulator ON. - (++) Low Power regulator ON. - (+) Exit: - Any EXTI Line (Internal or External) configured in Interrupt/Event mode. - - *** Standby mode *** - ==================== - [..] - (+) - The Standby mode allows to achieve the lowest power consumption. It is based - on the Cortex-M4 deep sleep mode, with the voltage regulator disabled. - The 1.2V domain is consequently powered off. The PLL, the HSI oscillator and - the HSE oscillator are also switched off. SRAM and register contents are lost - except for the RTC registers, RTC backup registers, backup SRAM and Standby - circuitry. - - The voltage regulator is OFF. - - (++) Entry: - (+++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function. - (++) Exit: - (+++) WKUP pin rising edge, RTC alarm (Alarm A and Alarm B), RTC wake-up, - tamper event, time-stamp event, external reset in NRST pin, IWDG reset. - - *** Auto-wake-up (AWU) from low-power mode *** - ============================================= - [..] - - (+) The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC - Wake-up event, a tamper event or a time-stamp event, without depending on - an external interrupt (Auto-wake-up mode). - - (+) RTC auto-wake-up (AWU) from the Stop and Standby modes - - (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to - configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function. - - (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it - is necessary to configure the RTC to detect the tamper or time stamp event using the - HAL_RTCEx_SetTimeStamp_IT() or HAL_RTCEx_SetTamper_IT() functions. - - (++) To wake up from the Stop mode with an RTC Wake-up event, it is necessary to - configure the RTC to generate the RTC Wake-up event using the HAL_RTCEx_SetWakeUpTimer_IT() function. - -@endverbatim - * @{ - */ - -/** - * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD). - * @param sConfigPVD pointer to an PWR_PVDTypeDef structure that contains the configuration - * information for the PVD. - * @note Refer to the electrical characteristics of your device datasheet for - * more details about the voltage threshold corresponding to each - * detection level. - * @retval None - */ -void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD) -{ - /* Check the parameters */ - assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel)); - assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode)); - - /* Set PLS[7:5] bits according to PVDLevel value */ - MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel); - - /* Clear any previous config. Keep it clear if no event or IT mode is selected */ - __HAL_PWR_PVD_EXTI_DISABLE_EVENT(); - __HAL_PWR_PVD_EXTI_DISABLE_IT(); - __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); - __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); - - /* Configure interrupt mode */ - if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT) - { - __HAL_PWR_PVD_EXTI_ENABLE_IT(); - } - - /* Configure event mode */ - if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT) - { - __HAL_PWR_PVD_EXTI_ENABLE_EVENT(); - } - - /* Configure the edge */ - if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE) - { - __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); - } - - if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE) - { - __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); - } -} - -/** - * @brief Enables the Power Voltage Detector(PVD). - * @retval None - */ -void HAL_PWR_EnablePVD(void) -{ - *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)ENABLE; -} - -/** - * @brief Disables the Power Voltage Detector(PVD). - * @retval None - */ -void HAL_PWR_DisablePVD(void) -{ - *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)DISABLE; -} - -/** - * @brief Enables the Wake-up PINx functionality. - * @param WakeUpPinx Specifies the Power Wake-Up pin to enable. - * This parameter can be one of the following values: - * @arg PWR_WAKEUP_PIN1 - * @arg PWR_WAKEUP_PIN2 available only on STM32F410xx/STM32F446xx/STM32F412xx/STM32F413xx/STM32F423xx devices - * @arg PWR_WAKEUP_PIN3 available only on STM32F410xx/STM32F412xx/STM32F413xx/STM32F423xx devices - * @retval None - */ -void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx) -{ - /* Check the parameter */ - assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); - - /* Enable the wake up pin */ - SET_BIT(PWR->CSR, WakeUpPinx); -} - -/** - * @brief Disables the Wake-up PINx functionality. - * @param WakeUpPinx Specifies the Power Wake-Up pin to disable. - * This parameter can be one of the following values: - * @arg PWR_WAKEUP_PIN1 - * @arg PWR_WAKEUP_PIN2 available only on STM32F410xx/STM32F446xx/STM32F412xx/STM32F413xx/STM32F423xx devices - * @arg PWR_WAKEUP_PIN3 available only on STM32F410xx/STM32F412xx/STM32F413xx/STM32F423xx devices - * @retval None - */ -void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx) -{ - /* Check the parameter */ - assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); - - /* Disable the wake up pin */ - CLEAR_BIT(PWR->CSR, WakeUpPinx); -} - -/** - * @brief Enters Sleep mode. - * - * @note In Sleep mode, all I/O pins keep the same state as in Run mode. - * - * @note In Sleep mode, the systick is stopped to avoid exit from this mode with - * systick interrupt when used as time base for Timeout - * - * @param Regulator Specifies the regulator state in SLEEP mode. - * This parameter can be one of the following values: - * @arg PWR_MAINREGULATOR_ON: SLEEP mode with regulator ON - * @arg PWR_LOWPOWERREGULATOR_ON: SLEEP mode with low power regulator ON - * @note This parameter is not used for the STM32F4 family and is kept as parameter - * just to maintain compatibility with the lower power families. - * @param SLEEPEntry Specifies if SLEEP mode in entered with WFI or WFE instruction. - * This parameter can be one of the following values: - * @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction - * @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction - * @retval None - */ -void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry) -{ - /* Check the parameters */ - assert_param(IS_PWR_REGULATOR(Regulator)); - assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry)); - - /* Clear SLEEPDEEP bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); - - /* Select SLEEP mode entry -------------------------------------------------*/ - if(SLEEPEntry == PWR_SLEEPENTRY_WFI) - { - /* Request Wait For Interrupt */ - __WFI(); - } - else - { - /* Request Wait For Event */ - __SEV(); - __WFE(); - __WFE(); - } -} - -/** - * @brief Enters Stop mode. - * @note In Stop mode, all I/O pins keep the same state as in Run mode. - * @note When exiting Stop mode by issuing an interrupt or a wake-up event, - * the HSI RC oscillator is selected as system clock. - * @note When the voltage regulator operates in low power mode, an additional - * startup delay is incurred when waking up from Stop mode. - * By keeping the internal regulator ON during Stop mode, the consumption - * is higher although the startup time is reduced. - * @param Regulator Specifies the regulator state in Stop mode. - * This parameter can be one of the following values: - * @arg PWR_MAINREGULATOR_ON: Stop mode with regulator ON - * @arg PWR_LOWPOWERREGULATOR_ON: Stop mode with low power regulator ON - * @param STOPEntry Specifies if Stop mode in entered with WFI or WFE instruction. - * This parameter can be one of the following values: - * @arg PWR_STOPENTRY_WFI: Enter Stop mode with WFI instruction - * @arg PWR_STOPENTRY_WFE: Enter Stop mode with WFE instruction - * @retval None - */ -void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry) -{ - /* Check the parameters */ - assert_param(IS_PWR_REGULATOR(Regulator)); - assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); - - /* Select the regulator state in Stop mode: Set PDDS and LPDS bits according to PWR_Regulator value */ - MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS), Regulator); - - /* Set SLEEPDEEP bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); - - /* Select Stop mode entry --------------------------------------------------*/ - if(STOPEntry == PWR_STOPENTRY_WFI) - { - /* Request Wait For Interrupt */ - __WFI(); - } - else - { - /* Request Wait For Event */ - __SEV(); - __WFE(); - __WFE(); - } - /* Reset SLEEPDEEP bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); -} - -/** - * @brief Enters Standby mode. - * @note In Standby mode, all I/O pins are high impedance except for: - * - Reset pad (still available) - * - RTC_AF1 pin (PC13) if configured for tamper, time-stamp, RTC - * Alarm out, or RTC clock calibration out. - * - RTC_AF2 pin (PI8) if configured for tamper or time-stamp. - * - WKUP pin 1 (PA0) if enabled. - * @retval None - */ -void HAL_PWR_EnterSTANDBYMode(void) -{ - /* Select Standby mode */ - SET_BIT(PWR->CR, PWR_CR_PDDS); - - /* Set SLEEPDEEP bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); - - /* This option is used to ensure that store operations are completed */ -#if defined ( __CC_ARM) - __force_stores(); -#endif - /* Request Wait For Interrupt */ - __WFI(); -} - -/** - * @brief This function handles the PWR PVD interrupt request. - * @note This API should be called under the PVD_IRQHandler(). - * @retval None - */ -void HAL_PWR_PVD_IRQHandler(void) -{ - /* Check PWR Exti flag */ - if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET) - { - /* PWR PVD interrupt user callback */ - HAL_PWR_PVDCallback(); - - /* Clear PWR Exti pending bit */ - __HAL_PWR_PVD_EXTI_CLEAR_FLAG(); - } -} - -/** - * @brief PWR PVD interrupt callback - * @retval None - */ -__weak void HAL_PWR_PVDCallback(void) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_PWR_PVDCallback could be implemented in the user file - */ -} - -/** - * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode. - * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor - * re-enters SLEEP mode when an interruption handling is over. - * Setting this bit is useful when the processor is expected to run only on - * interruptions handling. - * @retval None - */ -void HAL_PWR_EnableSleepOnExit(void) -{ - /* Set SLEEPONEXIT bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); -} - -/** - * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode. - * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor - * re-enters SLEEP mode when an interruption handling is over. - * @retval None - */ -void HAL_PWR_DisableSleepOnExit(void) -{ - /* Clear SLEEPONEXIT bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); -} - -/** - * @brief Enables CORTEX M4 SEVONPEND bit. - * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes - * WFE to wake up when an interrupt moves from inactive to pended. - * @retval None - */ -void HAL_PWR_EnableSEVOnPend(void) -{ - /* Set SEVONPEND bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); -} - -/** - * @brief Disables CORTEX M4 SEVONPEND bit. - * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes - * WFE to wake up when an interrupt moves from inactive to pended. - * @retval None - */ -void HAL_PWR_DisableSEVOnPend(void) -{ - /* Clear SEVONPEND bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_PWR_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ +/** + ****************************************************************************** + * @file stm32f4xx_hal_pwr.c + * @author MCD Application Team + * @brief PWR HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Power Controller (PWR) peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup PWR PWR + * @brief PWR HAL module driver + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup PWR_Private_Constants + * @{ + */ + +/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask + * @{ + */ +#define PVD_MODE_IT 0x00010000U +#define PVD_MODE_EVT 0x00020000U +#define PVD_RISING_EDGE 0x00000001U +#define PVD_FALLING_EDGE 0x00000002U +/** + * @} + */ + +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + After reset, the backup domain (RTC registers, RTC backup data + registers and backup SRAM) is protected against possible unwanted + write accesses. + To enable access to the RTC Domain and RTC registers, proceed as follows: + (+) Enable the Power Controller (PWR) APB1 interface clock using the + __HAL_RCC_PWR_CLK_ENABLE() macro. + (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function. + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the HAL PWR peripheral registers to their default reset values. + * @retval None + */ +void HAL_PWR_DeInit(void) +{ + __HAL_RCC_PWR_FORCE_RESET(); + __HAL_RCC_PWR_RELEASE_RESET(); +} + +/** + * @brief Enables access to the backup domain (RTC registers, RTC + * backup data registers and backup SRAM). + * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the + * Backup Domain Access should be kept enabled. + * @note The following sequence is required to bypass the delay between + * DBP bit programming and the effective enabling of the backup domain. + * Please check the Errata Sheet for more details under "Possible delay + * in backup domain protection disabling/enabling after programming the + * DBP bit" section. + * @retval None + */ +void HAL_PWR_EnableBkUpAccess(void) +{ + __IO uint32_t dummyread; + *(__IO uint32_t *) CR_DBP_BB = (uint32_t)ENABLE; + dummyread = PWR->CR; + UNUSED(dummyread); +} + +/** + * @brief Disables access to the backup domain (RTC registers, RTC + * backup data registers and backup SRAM). + * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the + * Backup Domain Access should be kept enabled. + * @note The following sequence is required to bypass the delay between + * DBP bit programming and the effective disabling of the backup domain. + * Please check the Errata Sheet for more details under "Possible delay + * in backup domain protection disabling/enabling after programming the + * DBP bit" section. + * @retval None + */ +void HAL_PWR_DisableBkUpAccess(void) +{ + __IO uint32_t dummyread; + *(__IO uint32_t *) CR_DBP_BB = (uint32_t)DISABLE; + dummyread = PWR->CR; + UNUSED(dummyread); +} + +/** + * @} + */ + +/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions + * @brief Low Power modes configuration functions + * +@verbatim + + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + + *** PVD configuration *** + ========================= + [..] + (+) The PVD is used to monitor the VDD power supply by comparing it to a + threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR). + (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower + than the PVD threshold. This event is internally connected to the EXTI + line16 and can generate an interrupt if enabled. This is done through + __HAL_PWR_PVD_EXTI_ENABLE_IT() macro. + (+) The PVD is stopped in Standby mode. + + *** Wake-up pin configuration *** + ================================ + [..] + (+) Wake-up pin is used to wake up the system from Standby mode. This pin is + forced in input pull-down configuration and is active on rising edges. + (+) There is one Wake-up pin: Wake-up Pin 1 on PA.00. + (++) For STM32F446xx there are two Wake-Up pins: Pin1 on PA.00 and Pin2 on PC.13 + (++) For STM32F410xx/STM32F412xx/STM32F413xx/STM32F423xx there are three Wake-Up pins: Pin1 on PA.00, Pin2 on PC.00 and Pin3 on PC.01 + + *** Low Power modes configuration *** + ===================================== + [..] + The devices feature 3 low-power modes: + (+) Sleep mode: Cortex-M4 core stopped, peripherals kept running. + (+) Stop mode: all clocks are stopped, regulator running, regulator + in low power mode + (+) Standby mode: 1.2V domain powered off. + + *** Sleep mode *** + ================== + [..] + (+) Entry: + The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI) + functions with + (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction + (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction + + -@@- The Regulator parameter is not used for the STM32F4 family + and is kept as parameter just to maintain compatibility with the + lower power families (STM32L). + (+) Exit: + Any peripheral interrupt acknowledged by the nested vectored interrupt + controller (NVIC) can wake up the device from Sleep mode. + + *** Stop mode *** + ================= + [..] + In Stop mode, all clocks in the 1.2V domain are stopped, the PLL, the HSI, + and the HSE RC oscillators are disabled. Internal SRAM and register contents + are preserved. + The voltage regulator can be configured either in normal or low-power mode. + To minimize the consumption In Stop mode, FLASH can be powered off before + entering the Stop mode using the HAL_PWREx_EnableFlashPowerDown() function. + It can be switched on again by software after exiting the Stop mode using + the HAL_PWREx_DisableFlashPowerDown() function. + + (+) Entry: + The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON) + function with: + (++) Main regulator ON. + (++) Low Power regulator ON. + (+) Exit: + Any EXTI Line (Internal or External) configured in Interrupt/Event mode. + + *** Standby mode *** + ==================== + [..] + (+) + The Standby mode allows to achieve the lowest power consumption. It is based + on the Cortex-M4 deep sleep mode, with the voltage regulator disabled. + The 1.2V domain is consequently powered off. The PLL, the HSI oscillator and + the HSE oscillator are also switched off. SRAM and register contents are lost + except for the RTC registers, RTC backup registers, backup SRAM and Standby + circuitry. + + The voltage regulator is OFF. + + (++) Entry: + (+++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function. + (++) Exit: + (+++) WKUP pin rising edge, RTC alarm (Alarm A and Alarm B), RTC wake-up, + tamper event, time-stamp event, external reset in NRST pin, IWDG reset. + + *** Auto-wake-up (AWU) from low-power mode *** + ============================================= + [..] + + (+) The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC + Wake-up event, a tamper event or a time-stamp event, without depending on + an external interrupt (Auto-wake-up mode). + + (+) RTC auto-wake-up (AWU) from the Stop and Standby modes + + (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to + configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function. + + (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it + is necessary to configure the RTC to detect the tamper or time stamp event using the + HAL_RTCEx_SetTimeStamp_IT() or HAL_RTCEx_SetTamper_IT() functions. + + (++) To wake up from the Stop mode with an RTC Wake-up event, it is necessary to + configure the RTC to generate the RTC Wake-up event using the HAL_RTCEx_SetWakeUpTimer_IT() function. + +@endverbatim + * @{ + */ + +/** + * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD). + * @param sConfigPVD pointer to an PWR_PVDTypeDef structure that contains the configuration + * information for the PVD. + * @note Refer to the electrical characteristics of your device datasheet for + * more details about the voltage threshold corresponding to each + * detection level. + * @retval None + */ +void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD) +{ + /* Check the parameters */ + assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel)); + assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode)); + + /* Set PLS[7:5] bits according to PVDLevel value */ + MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel); + + /* Clear any previous config. Keep it clear if no event or IT mode is selected */ + __HAL_PWR_PVD_EXTI_DISABLE_EVENT(); + __HAL_PWR_PVD_EXTI_DISABLE_IT(); + __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); + __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); + + /* Configure interrupt mode */ + if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT) + { + __HAL_PWR_PVD_EXTI_ENABLE_IT(); + } + + /* Configure event mode */ + if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT) + { + __HAL_PWR_PVD_EXTI_ENABLE_EVENT(); + } + + /* Configure the edge */ + if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE) + { + __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); + } + + if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE) + { + __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); + } +} + +/** + * @brief Enables the Power Voltage Detector(PVD). + * @retval None + */ +void HAL_PWR_EnablePVD(void) +{ + *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)ENABLE; +} + +/** + * @brief Disables the Power Voltage Detector(PVD). + * @retval None + */ +void HAL_PWR_DisablePVD(void) +{ + *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)DISABLE; +} + +/** + * @brief Enables the Wake-up PINx functionality. + * @param WakeUpPinx Specifies the Power Wake-Up pin to enable. + * This parameter can be one of the following values: + * @arg PWR_WAKEUP_PIN1 + * @arg PWR_WAKEUP_PIN2 available only on STM32F410xx/STM32F446xx/STM32F412xx/STM32F413xx/STM32F423xx devices + * @arg PWR_WAKEUP_PIN3 available only on STM32F410xx/STM32F412xx/STM32F413xx/STM32F423xx devices + * @retval None + */ +void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx) +{ + /* Check the parameter */ + assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); + + /* Enable the wake up pin */ + SET_BIT(PWR->CSR, WakeUpPinx); +} + +/** + * @brief Disables the Wake-up PINx functionality. + * @param WakeUpPinx Specifies the Power Wake-Up pin to disable. + * This parameter can be one of the following values: + * @arg PWR_WAKEUP_PIN1 + * @arg PWR_WAKEUP_PIN2 available only on STM32F410xx/STM32F446xx/STM32F412xx/STM32F413xx/STM32F423xx devices + * @arg PWR_WAKEUP_PIN3 available only on STM32F410xx/STM32F412xx/STM32F413xx/STM32F423xx devices + * @retval None + */ +void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx) +{ + /* Check the parameter */ + assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); + + /* Disable the wake up pin */ + CLEAR_BIT(PWR->CSR, WakeUpPinx); +} + +/** + * @brief Enters Sleep mode. + * + * @note In Sleep mode, all I/O pins keep the same state as in Run mode. + * + * @note In Sleep mode, the systick is stopped to avoid exit from this mode with + * systick interrupt when used as time base for Timeout + * + * @param Regulator Specifies the regulator state in SLEEP mode. + * This parameter can be one of the following values: + * @arg PWR_MAINREGULATOR_ON: SLEEP mode with regulator ON + * @arg PWR_LOWPOWERREGULATOR_ON: SLEEP mode with low power regulator ON + * @note This parameter is not used for the STM32F4 family and is kept as parameter + * just to maintain compatibility with the lower power families. + * @param SLEEPEntry Specifies if SLEEP mode in entered with WFI or WFE instruction. + * This parameter can be one of the following values: + * @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction + * @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction + * @retval None + */ +void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry) +{ + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR(Regulator)); + assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry)); + + /* Clear SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* Select SLEEP mode entry -------------------------------------------------*/ + if(SLEEPEntry == PWR_SLEEPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + __WFE(); + __WFE(); + } +} + +/** + * @brief Enters Stop mode. + * @note In Stop mode, all I/O pins keep the same state as in Run mode. + * @note When exiting Stop mode by issuing an interrupt or a wake-up event, + * the HSI RC oscillator is selected as system clock. + * @note When the voltage regulator operates in low power mode, an additional + * startup delay is incurred when waking up from Stop mode. + * By keeping the internal regulator ON during Stop mode, the consumption + * is higher although the startup time is reduced. + * @param Regulator Specifies the regulator state in Stop mode. + * This parameter can be one of the following values: + * @arg PWR_MAINREGULATOR_ON: Stop mode with regulator ON + * @arg PWR_LOWPOWERREGULATOR_ON: Stop mode with low power regulator ON + * @param STOPEntry Specifies if Stop mode in entered with WFI or WFE instruction. + * This parameter can be one of the following values: + * @arg PWR_STOPENTRY_WFI: Enter Stop mode with WFI instruction + * @arg PWR_STOPENTRY_WFE: Enter Stop mode with WFE instruction + * @retval None + */ +void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry) +{ + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR(Regulator)); + assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); + + /* Select the regulator state in Stop mode: Set PDDS and LPDS bits according to PWR_Regulator value */ + MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS), Regulator); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* Select Stop mode entry --------------------------------------------------*/ + if(STOPEntry == PWR_STOPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + __WFE(); + __WFE(); + } + /* Reset SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + +/** + * @brief Enters Standby mode. + * @note In Standby mode, all I/O pins are high impedance except for: + * - Reset pad (still available) + * - RTC_AF1 pin (PC13) if configured for tamper, time-stamp, RTC + * Alarm out, or RTC clock calibration out. + * - RTC_AF2 pin (PI8) if configured for tamper or time-stamp. + * - WKUP pin 1 (PA0) if enabled. + * @retval None + */ +void HAL_PWR_EnterSTANDBYMode(void) +{ + /* Select Standby mode */ + SET_BIT(PWR->CR, PWR_CR_PDDS); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* This option is used to ensure that store operations are completed */ +#if defined ( __CC_ARM) + __force_stores(); +#endif + /* Request Wait For Interrupt */ + __WFI(); +} + +/** + * @brief This function handles the PWR PVD interrupt request. + * @note This API should be called under the PVD_IRQHandler(). + * @retval None + */ +void HAL_PWR_PVD_IRQHandler(void) +{ + /* Check PWR Exti flag */ + if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET) + { + /* PWR PVD interrupt user callback */ + HAL_PWR_PVDCallback(); + + /* Clear PWR Exti pending bit */ + __HAL_PWR_PVD_EXTI_CLEAR_FLAG(); + } +} + +/** + * @brief PWR PVD interrupt callback + * @retval None + */ +__weak void HAL_PWR_PVDCallback(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_PWR_PVDCallback could be implemented in the user file + */ +} + +/** + * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode. + * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor + * re-enters SLEEP mode when an interruption handling is over. + * Setting this bit is useful when the processor is expected to run only on + * interruptions handling. + * @retval None + */ +void HAL_PWR_EnableSleepOnExit(void) +{ + /* Set SLEEPONEXIT bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + +/** + * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode. + * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor + * re-enters SLEEP mode when an interruption handling is over. + * @retval None + */ +void HAL_PWR_DisableSleepOnExit(void) +{ + /* Clear SLEEPONEXIT bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + +/** + * @brief Enables CORTEX M4 SEVONPEND bit. + * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes + * WFE to wake up when an interrupt moves from inactive to pended. + * @retval None + */ +void HAL_PWR_EnableSEVOnPend(void) +{ + /* Set SEVONPEND bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + +/** + * @brief Disables CORTEX M4 SEVONPEND bit. + * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes + * WFE to wake up when an interrupt moves from inactive to pended. + * @retval None + */ +void HAL_PWR_DisableSEVOnPend(void) +{ + /* Clear SEVONPEND bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Drivers/stm32f4xx_hal_pwr.h b/libs/hal/stm32f4xx_hal_pwr.h similarity index 97% rename from Drivers/stm32f4xx_hal_pwr.h rename to libs/hal/stm32f4xx_hal_pwr.h index ab0412d..d97f255 100644 --- a/Drivers/stm32f4xx_hal_pwr.h +++ b/libs/hal/stm32f4xx_hal_pwr.h @@ -1,427 +1,427 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_pwr.h - * @author MCD Application Team - * @brief Header file of PWR HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_PWR_H -#define __STM32F4xx_HAL_PWR_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup PWR - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup PWR_Exported_Types PWR Exported Types - * @{ - */ - -/** - * @brief PWR PVD configuration structure definition - */ -typedef struct -{ - uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level. - This parameter can be a value of @ref PWR_PVD_detection_level */ - - uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. - This parameter can be a value of @ref PWR_PVD_Mode */ -}PWR_PVDTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup PWR_Exported_Constants PWR Exported Constants - * @{ - */ - -/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins - * @{ - */ -#define PWR_WAKEUP_PIN1 0x00000100U -/** - * @} - */ - -/** @defgroup PWR_PVD_detection_level PWR PVD detection level - * @{ - */ -#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0 -#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1 -#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2 -#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3 -#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4 -#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5 -#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6 -#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7/* External input analog voltage - (Compare internally to VREFINT) */ -/** - * @} - */ - -/** @defgroup PWR_PVD_Mode PWR PVD Mode - * @{ - */ -#define PWR_PVD_MODE_NORMAL 0x00000000U /*!< basic mode is used */ -#define PWR_PVD_MODE_IT_RISING 0x00010001U /*!< External Interrupt Mode with Rising edge trigger detection */ -#define PWR_PVD_MODE_IT_FALLING 0x00010002U /*!< External Interrupt Mode with Falling edge trigger detection */ -#define PWR_PVD_MODE_IT_RISING_FALLING 0x00010003U /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ -#define PWR_PVD_MODE_EVENT_RISING 0x00020001U /*!< Event Mode with Rising edge trigger detection */ -#define PWR_PVD_MODE_EVENT_FALLING 0x00020002U /*!< Event Mode with Falling edge trigger detection */ -#define PWR_PVD_MODE_EVENT_RISING_FALLING 0x00020003U /*!< Event Mode with Rising/Falling edge trigger detection */ -/** - * @} - */ - - -/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode - * @{ - */ -#define PWR_MAINREGULATOR_ON 0x00000000U -#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS -/** - * @} - */ - -/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry - * @{ - */ -#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01) -#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02) -/** - * @} - */ - -/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry - * @{ - */ -#define PWR_STOPENTRY_WFI ((uint8_t)0x01) -#define PWR_STOPENTRY_WFE ((uint8_t)0x02) -/** - * @} - */ - -/** @defgroup PWR_Flag PWR Flag - * @{ - */ -#define PWR_FLAG_WU PWR_CSR_WUF -#define PWR_FLAG_SB PWR_CSR_SBF -#define PWR_FLAG_PVDO PWR_CSR_PVDO -#define PWR_FLAG_BRR PWR_CSR_BRR -#define PWR_FLAG_VOSRDY PWR_CSR_VOSRDY -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup PWR_Exported_Macro PWR Exported Macro - * @{ - */ - -/** @brief Check PWR flag is set or not. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event - * was received from the WKUP pin or from the RTC alarm (Alarm A - * or Alarm B), RTC Tamper event, RTC TimeStamp event or RTC Wakeup. - * An additional wakeup event is detected if the WKUP pin is enabled - * (by setting the EWUP bit) when the WKUP pin level is already high. - * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was - * resumed from StandBy mode. - * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled - * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode - * For this reason, this bit is equal to 0 after Standby or reset - * until the PVDE bit is set. - * @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset - * when the device wakes up from Standby mode or by a system reset - * or power reset. - * @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage - * scaling output selection is ready. - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__)) - -/** @brief Clear the PWR's pending flags. - * @param __FLAG__ specifies the flag to clear. - * This parameter can be one of the following values: - * @arg PWR_FLAG_WU: Wake Up flag - * @arg PWR_FLAG_SB: StandBy flag - */ -#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2U) - -/** - * @brief Enable the PVD Exti Line 16. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD)) - -/** - * @brief Disable the PVD EXTI Line 16. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD)) - -/** - * @brief Enable event on PVD Exti Line 16. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD)) - -/** - * @brief Disable event on PVD Exti Line 16. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD)) - -/** - * @brief Enable the PVD Extended Interrupt Rising Trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) - -/** - * @brief Disable the PVD Extended Interrupt Rising Trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) - -/** - * @brief Enable the PVD Extended Interrupt Falling Trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) - - -/** - * @brief Disable the PVD Extended Interrupt Falling Trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) - - -/** - * @brief PVD EXTI line configuration: set rising & falling edge trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() do{__HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();\ - __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();\ - }while(0U) - -/** - * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger. - * This parameter can be: - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() do{__HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();\ - __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();\ - }while(0U) - -/** - * @brief checks whether the specified PVD Exti interrupt flag is set or not. - * @retval EXTI PVD Line Status. - */ -#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD)) - -/** - * @brief Clear the PVD Exti flag. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD)) - -/** - * @brief Generates a Software interrupt on PVD EXTI line. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD)) - -/** - * @} - */ - -/* Include PWR HAL Extension module */ -#include "stm32f4xx_hal_pwr_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup PWR_Exported_Functions PWR Exported Functions - * @{ - */ - -/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ -/* Initialization and de-initialization functions *****************************/ -void HAL_PWR_DeInit(void); -void HAL_PWR_EnableBkUpAccess(void); -void HAL_PWR_DisableBkUpAccess(void); -/** - * @} - */ - -/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions - * @{ - */ -/* Peripheral Control functions **********************************************/ -/* PVD configuration */ -void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD); -void HAL_PWR_EnablePVD(void); -void HAL_PWR_DisablePVD(void); - -/* WakeUp pins configuration */ -void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx); -void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx); - -/* Low Power modes entry */ -void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry); -void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); -void HAL_PWR_EnterSTANDBYMode(void); - -/* Power PVD IRQ Handler */ -void HAL_PWR_PVD_IRQHandler(void); -void HAL_PWR_PVDCallback(void); - -/* Cortex System Control functions *******************************************/ -void HAL_PWR_EnableSleepOnExit(void); -void HAL_PWR_DisableSleepOnExit(void); -void HAL_PWR_EnableSEVOnPend(void); -void HAL_PWR_DisableSEVOnPend(void); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup PWR_Private_Constants PWR Private Constants - * @{ - */ - -/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line - * @{ - */ -#define PWR_EXTI_LINE_PVD ((uint32_t)EXTI_IMR_MR16) /*!< External interrupt line 16 Connected to the PVD EXTI Line */ -/** - * @} - */ - -/** @defgroup PWR_register_alias_address PWR Register alias address - * @{ - */ -/* ------------- PWR registers bit address in the alias region ---------------*/ -#define PWR_OFFSET (PWR_BASE - PERIPH_BASE) -#define PWR_CR_OFFSET 0x00U -#define PWR_CSR_OFFSET 0x04U -#define PWR_CR_OFFSET_BB (PWR_OFFSET + PWR_CR_OFFSET) -#define PWR_CSR_OFFSET_BB (PWR_OFFSET + PWR_CSR_OFFSET) -/** - * @} - */ - -/** @defgroup PWR_CR_register_alias PWR CR Register alias address - * @{ - */ -/* --- CR Register ---*/ -/* Alias word address of DBP bit */ -#define DBP_BIT_NUMBER PWR_CR_DBP_Pos -#define CR_DBP_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (DBP_BIT_NUMBER * 4U)) - -/* Alias word address of PVDE bit */ -#define PVDE_BIT_NUMBER PWR_CR_PVDE_Pos -#define CR_PVDE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (PVDE_BIT_NUMBER * 4U)) - -/* Alias word address of VOS bit */ -#define VOS_BIT_NUMBER PWR_CR_VOS_Pos -#define CR_VOS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (VOS_BIT_NUMBER * 4U)) -/** - * @} - */ - -/** @defgroup PWR_CSR_register_alias PWR CSR Register alias address - * @{ - */ -/* --- CSR Register ---*/ -/* Alias word address of EWUP bit */ -#define EWUP_BIT_NUMBER PWR_CSR_EWUP_Pos -#define CSR_EWUP_BB (PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (EWUP_BIT_NUMBER * 4U)) -/** - * @} - */ - -/** - * @} - */ -/* Private macros ------------------------------------------------------------*/ -/** @defgroup PWR_Private_Macros PWR Private Macros - * @{ - */ - -/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters - * @{ - */ -#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \ - ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \ - ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \ - ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7)) -#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \ - ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \ - ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \ - ((MODE) == PWR_PVD_MODE_NORMAL)) -#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \ - ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) -#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE)) -#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE)) -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F4xx_HAL_PWR_H */ +/** + ****************************************************************************** + * @file stm32f4xx_hal_pwr.h + * @author MCD Application Team + * @brief Header file of PWR HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_PWR_H +#define __STM32F4xx_HAL_PWR_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup PWR + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Types PWR Exported Types + * @{ + */ + +/** + * @brief PWR PVD configuration structure definition + */ +typedef struct +{ + uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level. + This parameter can be a value of @ref PWR_PVD_detection_level */ + + uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. + This parameter can be a value of @ref PWR_PVD_Mode */ +}PWR_PVDTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PWR_Exported_Constants PWR Exported Constants + * @{ + */ + +/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins + * @{ + */ +#define PWR_WAKEUP_PIN1 0x00000100U +/** + * @} + */ + +/** @defgroup PWR_PVD_detection_level PWR PVD detection level + * @{ + */ +#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0 +#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1 +#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2 +#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3 +#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4 +#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5 +#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6 +#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7/* External input analog voltage + (Compare internally to VREFINT) */ +/** + * @} + */ + +/** @defgroup PWR_PVD_Mode PWR PVD Mode + * @{ + */ +#define PWR_PVD_MODE_NORMAL 0x00000000U /*!< basic mode is used */ +#define PWR_PVD_MODE_IT_RISING 0x00010001U /*!< External Interrupt Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_IT_FALLING 0x00010002U /*!< External Interrupt Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_IT_RISING_FALLING 0x00010003U /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING 0x00020001U /*!< Event Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_EVENT_FALLING 0x00020002U /*!< Event Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING_FALLING 0x00020003U /*!< Event Mode with Rising/Falling edge trigger detection */ +/** + * @} + */ + + +/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode + * @{ + */ +#define PWR_MAINREGULATOR_ON 0x00000000U +#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS +/** + * @} + */ + +/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry + * @{ + */ +#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01) +#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02) +/** + * @} + */ + +/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry + * @{ + */ +#define PWR_STOPENTRY_WFI ((uint8_t)0x01) +#define PWR_STOPENTRY_WFE ((uint8_t)0x02) +/** + * @} + */ + +/** @defgroup PWR_Flag PWR Flag + * @{ + */ +#define PWR_FLAG_WU PWR_CSR_WUF +#define PWR_FLAG_SB PWR_CSR_SBF +#define PWR_FLAG_PVDO PWR_CSR_PVDO +#define PWR_FLAG_BRR PWR_CSR_BRR +#define PWR_FLAG_VOSRDY PWR_CSR_VOSRDY +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup PWR_Exported_Macro PWR Exported Macro + * @{ + */ + +/** @brief Check PWR flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event + * was received from the WKUP pin or from the RTC alarm (Alarm A + * or Alarm B), RTC Tamper event, RTC TimeStamp event or RTC Wakeup. + * An additional wakeup event is detected if the WKUP pin is enabled + * (by setting the EWUP bit) when the WKUP pin level is already high. + * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was + * resumed from StandBy mode. + * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled + * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode + * For this reason, this bit is equal to 0 after Standby or reset + * until the PVDE bit is set. + * @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset + * when the device wakes up from Standby mode or by a system reset + * or power reset. + * @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage + * scaling output selection is ready. + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the PWR's pending flags. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one of the following values: + * @arg PWR_FLAG_WU: Wake Up flag + * @arg PWR_FLAG_SB: StandBy flag + */ +#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2U) + +/** + * @brief Enable the PVD Exti Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD)) + +/** + * @brief Disable the PVD EXTI Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD)) + +/** + * @brief Enable event on PVD Exti Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD)) + +/** + * @brief Disable event on PVD Exti Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD)) + +/** + * @brief Enable the PVD Extended Interrupt Rising Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Extended Interrupt Rising Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) + +/** + * @brief Enable the PVD Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) + + +/** + * @brief Disable the PVD Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) + + +/** + * @brief PVD EXTI line configuration: set rising & falling edge trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() do{__HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();\ + __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();\ + }while(0U) + +/** + * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger. + * This parameter can be: + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() do{__HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();\ + __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();\ + }while(0U) + +/** + * @brief checks whether the specified PVD Exti interrupt flag is set or not. + * @retval EXTI PVD Line Status. + */ +#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD)) + +/** + * @brief Clear the PVD Exti flag. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD)) + +/** + * @brief Generates a Software interrupt on PVD EXTI line. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD)) + +/** + * @} + */ + +/* Include PWR HAL Extension module */ +#include "stm32f4xx_hal_pwr_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +void HAL_PWR_DeInit(void); +void HAL_PWR_EnableBkUpAccess(void); +void HAL_PWR_DisableBkUpAccess(void); +/** + * @} + */ + +/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions + * @{ + */ +/* Peripheral Control functions **********************************************/ +/* PVD configuration */ +void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD); +void HAL_PWR_EnablePVD(void); +void HAL_PWR_DisablePVD(void); + +/* WakeUp pins configuration */ +void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx); +void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx); + +/* Low Power modes entry */ +void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry); +void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); +void HAL_PWR_EnterSTANDBYMode(void); + +/* Power PVD IRQ Handler */ +void HAL_PWR_PVD_IRQHandler(void); +void HAL_PWR_PVDCallback(void); + +/* Cortex System Control functions *******************************************/ +void HAL_PWR_EnableSleepOnExit(void); +void HAL_PWR_DisableSleepOnExit(void); +void HAL_PWR_EnableSEVOnPend(void); +void HAL_PWR_DisableSEVOnPend(void); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup PWR_Private_Constants PWR Private Constants + * @{ + */ + +/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line + * @{ + */ +#define PWR_EXTI_LINE_PVD ((uint32_t)EXTI_IMR_MR16) /*!< External interrupt line 16 Connected to the PVD EXTI Line */ +/** + * @} + */ + +/** @defgroup PWR_register_alias_address PWR Register alias address + * @{ + */ +/* ------------- PWR registers bit address in the alias region ---------------*/ +#define PWR_OFFSET (PWR_BASE - PERIPH_BASE) +#define PWR_CR_OFFSET 0x00U +#define PWR_CSR_OFFSET 0x04U +#define PWR_CR_OFFSET_BB (PWR_OFFSET + PWR_CR_OFFSET) +#define PWR_CSR_OFFSET_BB (PWR_OFFSET + PWR_CSR_OFFSET) +/** + * @} + */ + +/** @defgroup PWR_CR_register_alias PWR CR Register alias address + * @{ + */ +/* --- CR Register ---*/ +/* Alias word address of DBP bit */ +#define DBP_BIT_NUMBER PWR_CR_DBP_Pos +#define CR_DBP_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (DBP_BIT_NUMBER * 4U)) + +/* Alias word address of PVDE bit */ +#define PVDE_BIT_NUMBER PWR_CR_PVDE_Pos +#define CR_PVDE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (PVDE_BIT_NUMBER * 4U)) + +/* Alias word address of VOS bit */ +#define VOS_BIT_NUMBER PWR_CR_VOS_Pos +#define CR_VOS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (VOS_BIT_NUMBER * 4U)) +/** + * @} + */ + +/** @defgroup PWR_CSR_register_alias PWR CSR Register alias address + * @{ + */ +/* --- CSR Register ---*/ +/* Alias word address of EWUP bit */ +#define EWUP_BIT_NUMBER PWR_CSR_EWUP_Pos +#define CSR_EWUP_BB (PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (EWUP_BIT_NUMBER * 4U)) +/** + * @} + */ + +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PWR_Private_Macros PWR Private Macros + * @{ + */ + +/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters + * @{ + */ +#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \ + ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \ + ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \ + ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7)) +#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \ + ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \ + ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \ + ((MODE) == PWR_PVD_MODE_NORMAL)) +#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \ + ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) +#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE)) +#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE)) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32F4xx_HAL_PWR_H */ diff --git a/Drivers/stm32f4xx_hal_pwr_ex.c b/libs/hal/stm32f4xx_hal_pwr_ex.c similarity index 97% rename from Drivers/stm32f4xx_hal_pwr_ex.c rename to libs/hal/stm32f4xx_hal_pwr_ex.c index 1acca55..77f9c35 100644 --- a/Drivers/stm32f4xx_hal_pwr_ex.c +++ b/libs/hal/stm32f4xx_hal_pwr_ex.c @@ -1,600 +1,600 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_pwr_ex.c - * @author MCD Application Team - * @brief Extended PWR HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of PWR extension peripheral: - * + Peripheral Extended features functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup PWREx PWREx - * @brief PWR HAL module driver - * @{ - */ - -#ifdef HAL_PWR_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup PWREx_Private_Constants - * @{ - */ -#define PWR_OVERDRIVE_TIMEOUT_VALUE 1000U -#define PWR_UDERDRIVE_TIMEOUT_VALUE 1000U -#define PWR_BKPREG_TIMEOUT_VALUE 1000U -#define PWR_VOSRDY_TIMEOUT_VALUE 1000U -/** - * @} - */ - - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/** @defgroup PWREx_Exported_Functions PWREx Exported Functions - * @{ - */ - -/** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended features functions - * @brief Peripheral Extended features functions - * -@verbatim - - =============================================================================== - ##### Peripheral extended features functions ##### - =============================================================================== - - *** Main and Backup Regulators configuration *** - ================================================ - [..] - (+) The backup domain includes 4 Kbytes of backup SRAM accessible only from - the CPU, and address in 32-bit, 16-bit or 8-bit mode. Its content is - retained even in Standby or VBAT mode when the low power backup regulator - is enabled. It can be considered as an internal EEPROM when VBAT is - always present. You can use the HAL_PWREx_EnableBkUpReg() function to - enable the low power backup regulator. - - (+) When the backup domain is supplied by VDD (analog switch connected to VDD) - the backup SRAM is powered from VDD which replaces the VBAT power supply to - save battery life. - - (+) The backup SRAM is not mass erased by a tamper event. It is read - protected to prevent confidential data, such as cryptographic private - key, from being accessed. The backup SRAM can be erased only through - the Flash interface when a protection level change from level 1 to - level 0 is requested. - -@- Refer to the description of Read protection (RDP) in the Flash - programming manual. - - (+) The main internal regulator can be configured to have a tradeoff between - performance and power consumption when the device does not operate at - the maximum frequency. This is done through __HAL_PWR_MAINREGULATORMODE_CONFIG() - macro which configure VOS bit in PWR_CR register - - Refer to the product datasheets for more details. - - *** FLASH Power Down configuration **** - ======================================= - [..] - (+) By setting the FPDS bit in the PWR_CR register by using the - HAL_PWREx_EnableFlashPowerDown() function, the Flash memory also enters power - down mode when the device enters Stop mode. When the Flash memory - is in power down mode, an additional startup delay is incurred when - waking up from Stop mode. - - (+) For STM32F42xxx/43xxx/446xx/469xx/479xx Devices, the scale can be modified only when the PLL - is OFF and the HSI or HSE clock source is selected as system clock. - The new value programmed is active only when the PLL is ON. - When the PLL is OFF, the voltage scale 3 is automatically selected. - Refer to the datasheets for more details. - - *** Over-Drive and Under-Drive configuration **** - ================================================= - [..] - (+) For STM32F42xxx/43xxx/446xx/469xx/479xx Devices, in Run mode: the main regulator has - 2 operating modes available: - (++) Normal mode: The CPU and core logic operate at maximum frequency at a given - voltage scaling (scale 1, scale 2 or scale 3) - (++) Over-drive mode: This mode allows the CPU and the core logic to operate at a - higher frequency than the normal mode for a given voltage scaling (scale 1, - scale 2 or scale 3). This mode is enabled through HAL_PWREx_EnableOverDrive() function and - disabled by HAL_PWREx_DisableOverDrive() function, to enter or exit from Over-drive mode please follow - the sequence described in Reference manual. - - (+) For STM32F42xxx/43xxx/446xx/469xx/479xx Devices, in Stop mode: the main regulator or low power regulator - supplies a low power voltage to the 1.2V domain, thus preserving the content of registers - and internal SRAM. 2 operating modes are available: - (++) Normal mode: the 1.2V domain is preserved in nominal leakage mode. This mode is only - available when the main regulator or the low power regulator is used in Scale 3 or - low voltage mode. - (++) Under-drive mode: the 1.2V domain is preserved in reduced leakage mode. This mode is only - available when the main regulator or the low power regulator is in low voltage mode. - -@endverbatim - * @{ - */ - -/** - * @brief Enables the Backup Regulator. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void) -{ - uint32_t tickstart = 0U; - - *(__IO uint32_t *) CSR_BRE_BB = (uint32_t)ENABLE; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till Backup regulator ready flag is set */ - while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) == RESET) - { - if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - return HAL_OK; -} - -/** - * @brief Disables the Backup Regulator. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void) -{ - uint32_t tickstart = 0U; - - *(__IO uint32_t *) CSR_BRE_BB = (uint32_t)DISABLE; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till Backup regulator ready flag is set */ - while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) != RESET) - { - if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - return HAL_OK; -} - -/** - * @brief Enables the Flash Power Down in Stop mode. - * @retval None - */ -void HAL_PWREx_EnableFlashPowerDown(void) -{ - *(__IO uint32_t *) CR_FPDS_BB = (uint32_t)ENABLE; -} - -/** - * @brief Disables the Flash Power Down in Stop mode. - * @retval None - */ -void HAL_PWREx_DisableFlashPowerDown(void) -{ - *(__IO uint32_t *) CR_FPDS_BB = (uint32_t)DISABLE; -} - -/** - * @brief Return Voltage Scaling Range. - * @retval The configured scale for the regulator voltage(VOS bit field). - * The returned value can be one of the following: - * - @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode - * - @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode - * - @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode - */ -uint32_t HAL_PWREx_GetVoltageRange(void) -{ - return (PWR->CR & PWR_CR_VOS); -} - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) -/** - * @brief Configures the main internal regulator output voltage. - * @param VoltageScaling specifies the regulator output voltage to achieve - * a tradeoff between performance and power consumption. - * This parameter can be one of the following values: - * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output range 1 mode, - * the maximum value of fHCLK = 168 MHz. - * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output range 2 mode, - * the maximum value of fHCLK = 144 MHz. - * @note When moving from Range 1 to Range 2, the system frequency must be decreased to - * a value below 144 MHz before calling HAL_PWREx_ConfigVoltageScaling() API. - * When moving from Range 2 to Range 1, the system frequency can be increased to - * a value up to 168 MHz after calling HAL_PWREx_ConfigVoltageScaling() API. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling) -{ - uint32_t tickstart = 0U; - - assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling)); - - /* Enable PWR RCC Clock Peripheral */ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Set Range */ - __HAL_PWR_VOLTAGESCALING_CONFIG(VoltageScaling); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - while((__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY) == RESET)) - { - if((HAL_GetTick() - tickstart ) > PWR_VOSRDY_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -#elif defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || \ - defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) || \ - defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || \ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief Configures the main internal regulator output voltage. - * @param VoltageScaling specifies the regulator output voltage to achieve - * a tradeoff between performance and power consumption. - * This parameter can be one of the following values: - * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output range 1 mode, - * the maximum value of fHCLK is 168 MHz. It can be extended to - * 180 MHz by activating the over-drive mode. - * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output range 2 mode, - * the maximum value of fHCLK is 144 MHz. It can be extended to, - * 168 MHz by activating the over-drive mode. - * @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output range 3 mode, - * the maximum value of fHCLK is 120 MHz. - * @note To update the system clock frequency(SYSCLK): - * - Set the HSI or HSE as system clock frequency using the HAL_RCC_ClockConfig(). - * - Call the HAL_RCC_OscConfig() to configure the PLL. - * - Call HAL_PWREx_ConfigVoltageScaling() API to adjust the voltage scale. - * - Set the new system clock frequency using the HAL_RCC_ClockConfig(). - * @note The scale can be modified only when the HSI or HSE clock source is selected - * as system clock source, otherwise the API returns HAL_ERROR. - * @note When the PLL is OFF, the voltage scale 3 is automatically selected and the VOS bits - * value in the PWR_CR1 register are not taken in account. - * @note This API forces the PLL state ON to allow the possibility to configure the voltage scale 1 or 2. - * @note The new voltage scale is active only when the PLL is ON. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling) -{ - uint32_t tickstart = 0U; - - assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling)); - - /* Enable PWR RCC Clock Peripheral */ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Check if the PLL is used as system clock or not */ - if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL) - { - /* Disable the main PLL */ - __HAL_RCC_PLL_DISABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - /* Wait till PLL is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Set Range */ - __HAL_PWR_VOLTAGESCALING_CONFIG(VoltageScaling); - - /* Enable the main PLL */ - __HAL_RCC_PLL_ENABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - /* Wait till PLL is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - while((__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY) == RESET)) - { - if((HAL_GetTick() - tickstart ) > PWR_VOSRDY_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - return HAL_ERROR; - } - - return HAL_OK; -} -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\ - defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ - defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief Enables Main Regulator low voltage mode. - * @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx/ - * STM32F413xx/STM32F423xx devices. - * @retval None - */ -void HAL_PWREx_EnableMainRegulatorLowVoltage(void) -{ - *(__IO uint32_t *) CR_MRLVDS_BB = (uint32_t)ENABLE; -} - -/** - * @brief Disables Main Regulator low voltage mode. - * @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx/ - * STM32F413xx/STM32F423xxdevices. - * @retval None - */ -void HAL_PWREx_DisableMainRegulatorLowVoltage(void) -{ - *(__IO uint32_t *) CR_MRLVDS_BB = (uint32_t)DISABLE; -} - -/** - * @brief Enables Low Power Regulator low voltage mode. - * @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx/ - * STM32F413xx/STM32F423xx devices. - * @retval None - */ -void HAL_PWREx_EnableLowRegulatorLowVoltage(void) -{ - *(__IO uint32_t *) CR_LPLVDS_BB = (uint32_t)ENABLE; -} - -/** - * @brief Disables Low Power Regulator low voltage mode. - * @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx/ - * STM32F413xx/STM32F423xx devices. - * @retval None - */ -void HAL_PWREx_DisableLowRegulatorLowVoltage(void) -{ - *(__IO uint32_t *) CR_LPLVDS_BB = (uint32_t)DISABLE; -} - -#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx || - STM32F413xx || STM32F423xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** - * @brief Activates the Over-Drive mode. - * @note This function can be used only for STM32F42xx/STM32F43xx/STM32F446xx/STM32F469xx/STM32F479xx devices. - * This mode allows the CPU and the core logic to operate at a higher frequency - * than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3). - * @note It is recommended to enter or exit Over-drive mode when the application is not running - * critical tasks and when the system clock source is either HSI or HSE. - * During the Over-drive switch activation, no peripheral clocks should be enabled. - * The peripheral clocks must be enabled once the Over-drive mode is activated. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void) -{ - uint32_t tickstart = 0U; - - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Enable the Over-drive to extend the clock frequency to 180 Mhz */ - __HAL_PWR_OVERDRIVE_ENABLE(); - - /* Get tick */ - tickstart = HAL_GetTick(); - - while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY)) - { - if((HAL_GetTick() - tickstart) > PWR_OVERDRIVE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Enable the Over-drive switch */ - __HAL_PWR_OVERDRIVESWITCHING_ENABLE(); - - /* Get tick */ - tickstart = HAL_GetTick(); - - while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY)) - { - if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - return HAL_OK; -} - -/** - * @brief Deactivates the Over-Drive mode. - * @note This function can be used only for STM32F42xx/STM32F43xx/STM32F446xx/STM32F469xx/STM32F479xx devices. - * This mode allows the CPU and the core logic to operate at a higher frequency - * than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3). - * @note It is recommended to enter or exit Over-drive mode when the application is not running - * critical tasks and when the system clock source is either HSI or HSE. - * During the Over-drive switch activation, no peripheral clocks should be enabled. - * The peripheral clocks must be enabled once the Over-drive mode is activated. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void) -{ - uint32_t tickstart = 0U; - - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Disable the Over-drive switch */ - __HAL_PWR_OVERDRIVESWITCHING_DISABLE(); - - /* Get tick */ - tickstart = HAL_GetTick(); - - while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY)) - { - if((HAL_GetTick() - tickstart) > PWR_OVERDRIVE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Disable the Over-drive */ - __HAL_PWR_OVERDRIVE_DISABLE(); - - /* Get tick */ - tickstart = HAL_GetTick(); - - while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY)) - { - if((HAL_GetTick() - tickstart) > PWR_OVERDRIVE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -/** - * @brief Enters in Under-Drive STOP mode. - * - * @note This mode is only available for STM32F42xxx/STM32F43xxx/STM32F446xx/STM32F469xx/STM32F479xx devices. - * - * @note This mode can be selected only when the Under-Drive is already active - * - * @note This mode is enabled only with STOP low power mode. - * In this mode, the 1.2V domain is preserved in reduced leakage mode. This - * mode is only available when the main regulator or the low power regulator - * is in low voltage mode - * - * @note If the Under-drive mode was enabled, it is automatically disabled after - * exiting Stop mode. - * When the voltage regulator operates in Under-drive mode, an additional - * startup delay is induced when waking up from Stop mode. - * - * @note In Stop mode, all I/O pins keep the same state as in Run mode. - * - * @note When exiting Stop mode by issuing an interrupt or a wake-up event, - * the HSI RC oscillator is selected as system clock. - * - * @note When the voltage regulator operates in low power mode, an additional - * startup delay is incurred when waking up from Stop mode. - * By keeping the internal regulator ON during Stop mode, the consumption - * is higher although the startup time is reduced. - * - * @param Regulator specifies the regulator state in STOP mode. - * This parameter can be one of the following values: - * @arg PWR_MAINREGULATOR_UNDERDRIVE_ON: Main Regulator in under-drive mode - * and Flash memory in power-down when the device is in Stop under-drive mode - * @arg PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON: Low Power Regulator in under-drive mode - * and Flash memory in power-down when the device is in Stop under-drive mode - * @param STOPEntry specifies if STOP mode in entered with WFI or WFE instruction. - * This parameter can be one of the following values: - * @arg PWR_SLEEPENTRY_WFI: enter STOP mode with WFI instruction - * @arg PWR_SLEEPENTRY_WFE: enter STOP mode with WFE instruction - * @retval None - */ -HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry) -{ - uint32_t tmpreg1 = 0U; - - /* Check the parameters */ - assert_param(IS_PWR_REGULATOR_UNDERDRIVE(Regulator)); - assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); - - /* Enable Power ctrl clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - /* Enable the Under-drive Mode ---------------------------------------------*/ - /* Clear Under-drive flag */ - __HAL_PWR_CLEAR_ODRUDR_FLAG(); - - /* Enable the Under-drive */ - __HAL_PWR_UNDERDRIVE_ENABLE(); - - /* Select the regulator state in STOP mode ---------------------------------*/ - tmpreg1 = PWR->CR; - /* Clear PDDS, LPDS, MRLUDS and LPLUDS bits */ - tmpreg1 &= (uint32_t)~(PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_LPUDS | PWR_CR_MRUDS); - - /* Set LPDS, MRLUDS and LPLUDS bits according to PWR_Regulator value */ - tmpreg1 |= Regulator; - - /* Store the new value */ - PWR->CR = tmpreg1; - - /* Set SLEEPDEEP bit of Cortex System Control Register */ - SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; - - /* Select STOP mode entry --------------------------------------------------*/ - if(STOPEntry == PWR_SLEEPENTRY_WFI) - { - /* Request Wait For Interrupt */ - __WFI(); - } - else - { - /* Request Wait For Event */ - __WFE(); - } - /* Reset SLEEPDEEP bit of Cortex System Control Register */ - SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk); - - return HAL_OK; -} - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_PWR_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ +/** + ****************************************************************************** + * @file stm32f4xx_hal_pwr_ex.c + * @author MCD Application Team + * @brief Extended PWR HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of PWR extension peripheral: + * + Peripheral Extended features functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup PWREx PWREx + * @brief PWR HAL module driver + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup PWREx_Private_Constants + * @{ + */ +#define PWR_OVERDRIVE_TIMEOUT_VALUE 1000U +#define PWR_UDERDRIVE_TIMEOUT_VALUE 1000U +#define PWR_BKPREG_TIMEOUT_VALUE 1000U +#define PWR_VOSRDY_TIMEOUT_VALUE 1000U +/** + * @} + */ + + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/** @defgroup PWREx_Exported_Functions PWREx Exported Functions + * @{ + */ + +/** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended features functions + * @brief Peripheral Extended features functions + * +@verbatim + + =============================================================================== + ##### Peripheral extended features functions ##### + =============================================================================== + + *** Main and Backup Regulators configuration *** + ================================================ + [..] + (+) The backup domain includes 4 Kbytes of backup SRAM accessible only from + the CPU, and address in 32-bit, 16-bit or 8-bit mode. Its content is + retained even in Standby or VBAT mode when the low power backup regulator + is enabled. It can be considered as an internal EEPROM when VBAT is + always present. You can use the HAL_PWREx_EnableBkUpReg() function to + enable the low power backup regulator. + + (+) When the backup domain is supplied by VDD (analog switch connected to VDD) + the backup SRAM is powered from VDD which replaces the VBAT power supply to + save battery life. + + (+) The backup SRAM is not mass erased by a tamper event. It is read + protected to prevent confidential data, such as cryptographic private + key, from being accessed. The backup SRAM can be erased only through + the Flash interface when a protection level change from level 1 to + level 0 is requested. + -@- Refer to the description of Read protection (RDP) in the Flash + programming manual. + + (+) The main internal regulator can be configured to have a tradeoff between + performance and power consumption when the device does not operate at + the maximum frequency. This is done through __HAL_PWR_MAINREGULATORMODE_CONFIG() + macro which configure VOS bit in PWR_CR register + + Refer to the product datasheets for more details. + + *** FLASH Power Down configuration **** + ======================================= + [..] + (+) By setting the FPDS bit in the PWR_CR register by using the + HAL_PWREx_EnableFlashPowerDown() function, the Flash memory also enters power + down mode when the device enters Stop mode. When the Flash memory + is in power down mode, an additional startup delay is incurred when + waking up from Stop mode. + + (+) For STM32F42xxx/43xxx/446xx/469xx/479xx Devices, the scale can be modified only when the PLL + is OFF and the HSI or HSE clock source is selected as system clock. + The new value programmed is active only when the PLL is ON. + When the PLL is OFF, the voltage scale 3 is automatically selected. + Refer to the datasheets for more details. + + *** Over-Drive and Under-Drive configuration **** + ================================================= + [..] + (+) For STM32F42xxx/43xxx/446xx/469xx/479xx Devices, in Run mode: the main regulator has + 2 operating modes available: + (++) Normal mode: The CPU and core logic operate at maximum frequency at a given + voltage scaling (scale 1, scale 2 or scale 3) + (++) Over-drive mode: This mode allows the CPU and the core logic to operate at a + higher frequency than the normal mode for a given voltage scaling (scale 1, + scale 2 or scale 3). This mode is enabled through HAL_PWREx_EnableOverDrive() function and + disabled by HAL_PWREx_DisableOverDrive() function, to enter or exit from Over-drive mode please follow + the sequence described in Reference manual. + + (+) For STM32F42xxx/43xxx/446xx/469xx/479xx Devices, in Stop mode: the main regulator or low power regulator + supplies a low power voltage to the 1.2V domain, thus preserving the content of registers + and internal SRAM. 2 operating modes are available: + (++) Normal mode: the 1.2V domain is preserved in nominal leakage mode. This mode is only + available when the main regulator or the low power regulator is used in Scale 3 or + low voltage mode. + (++) Under-drive mode: the 1.2V domain is preserved in reduced leakage mode. This mode is only + available when the main regulator or the low power regulator is in low voltage mode. + +@endverbatim + * @{ + */ + +/** + * @brief Enables the Backup Regulator. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void) +{ + uint32_t tickstart = 0U; + + *(__IO uint32_t *) CSR_BRE_BB = (uint32_t)ENABLE; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait till Backup regulator ready flag is set */ + while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) == RESET) + { + if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + return HAL_OK; +} + +/** + * @brief Disables the Backup Regulator. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void) +{ + uint32_t tickstart = 0U; + + *(__IO uint32_t *) CSR_BRE_BB = (uint32_t)DISABLE; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait till Backup regulator ready flag is set */ + while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) != RESET) + { + if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + return HAL_OK; +} + +/** + * @brief Enables the Flash Power Down in Stop mode. + * @retval None + */ +void HAL_PWREx_EnableFlashPowerDown(void) +{ + *(__IO uint32_t *) CR_FPDS_BB = (uint32_t)ENABLE; +} + +/** + * @brief Disables the Flash Power Down in Stop mode. + * @retval None + */ +void HAL_PWREx_DisableFlashPowerDown(void) +{ + *(__IO uint32_t *) CR_FPDS_BB = (uint32_t)DISABLE; +} + +/** + * @brief Return Voltage Scaling Range. + * @retval The configured scale for the regulator voltage(VOS bit field). + * The returned value can be one of the following: + * - @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode + * - @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode + * - @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode + */ +uint32_t HAL_PWREx_GetVoltageRange(void) +{ + return (PWR->CR & PWR_CR_VOS); +} + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) +/** + * @brief Configures the main internal regulator output voltage. + * @param VoltageScaling specifies the regulator output voltage to achieve + * a tradeoff between performance and power consumption. + * This parameter can be one of the following values: + * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output range 1 mode, + * the maximum value of fHCLK = 168 MHz. + * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output range 2 mode, + * the maximum value of fHCLK = 144 MHz. + * @note When moving from Range 1 to Range 2, the system frequency must be decreased to + * a value below 144 MHz before calling HAL_PWREx_ConfigVoltageScaling() API. + * When moving from Range 2 to Range 1, the system frequency can be increased to + * a value up to 168 MHz after calling HAL_PWREx_ConfigVoltageScaling() API. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling) +{ + uint32_t tickstart = 0U; + + assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling)); + + /* Enable PWR RCC Clock Peripheral */ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* Set Range */ + __HAL_PWR_VOLTAGESCALING_CONFIG(VoltageScaling); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + while((__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY) == RESET)) + { + if((HAL_GetTick() - tickstart ) > PWR_VOSRDY_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +#elif defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ + defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || \ + defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) || \ + defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || \ + defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +/** + * @brief Configures the main internal regulator output voltage. + * @param VoltageScaling specifies the regulator output voltage to achieve + * a tradeoff between performance and power consumption. + * This parameter can be one of the following values: + * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output range 1 mode, + * the maximum value of fHCLK is 168 MHz. It can be extended to + * 180 MHz by activating the over-drive mode. + * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output range 2 mode, + * the maximum value of fHCLK is 144 MHz. It can be extended to, + * 168 MHz by activating the over-drive mode. + * @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output range 3 mode, + * the maximum value of fHCLK is 120 MHz. + * @note To update the system clock frequency(SYSCLK): + * - Set the HSI or HSE as system clock frequency using the HAL_RCC_ClockConfig(). + * - Call the HAL_RCC_OscConfig() to configure the PLL. + * - Call HAL_PWREx_ConfigVoltageScaling() API to adjust the voltage scale. + * - Set the new system clock frequency using the HAL_RCC_ClockConfig(). + * @note The scale can be modified only when the HSI or HSE clock source is selected + * as system clock source, otherwise the API returns HAL_ERROR. + * @note When the PLL is OFF, the voltage scale 3 is automatically selected and the VOS bits + * value in the PWR_CR1 register are not taken in account. + * @note This API forces the PLL state ON to allow the possibility to configure the voltage scale 1 or 2. + * @note The new voltage scale is active only when the PLL is ON. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling) +{ + uint32_t tickstart = 0U; + + assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling)); + + /* Enable PWR RCC Clock Peripheral */ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* Check if the PLL is used as system clock or not */ + if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL) + { + /* Disable the main PLL */ + __HAL_RCC_PLL_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + /* Wait till PLL is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Set Range */ + __HAL_PWR_VOLTAGESCALING_CONFIG(VoltageScaling); + + /* Enable the main PLL */ + __HAL_RCC_PLL_ENABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + /* Wait till PLL is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + while((__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY) == RESET)) + { + if((HAL_GetTick() - tickstart ) > PWR_VOSRDY_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ + +#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\ + defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ + defined(STM32F413xx) || defined(STM32F423xx) +/** + * @brief Enables Main Regulator low voltage mode. + * @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx/ + * STM32F413xx/STM32F423xx devices. + * @retval None + */ +void HAL_PWREx_EnableMainRegulatorLowVoltage(void) +{ + *(__IO uint32_t *) CR_MRLVDS_BB = (uint32_t)ENABLE; +} + +/** + * @brief Disables Main Regulator low voltage mode. + * @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx/ + * STM32F413xx/STM32F423xxdevices. + * @retval None + */ +void HAL_PWREx_DisableMainRegulatorLowVoltage(void) +{ + *(__IO uint32_t *) CR_MRLVDS_BB = (uint32_t)DISABLE; +} + +/** + * @brief Enables Low Power Regulator low voltage mode. + * @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx/ + * STM32F413xx/STM32F423xx devices. + * @retval None + */ +void HAL_PWREx_EnableLowRegulatorLowVoltage(void) +{ + *(__IO uint32_t *) CR_LPLVDS_BB = (uint32_t)ENABLE; +} + +/** + * @brief Disables Low Power Regulator low voltage mode. + * @note This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx/ + * STM32F413xx/STM32F423xx devices. + * @retval None + */ +void HAL_PWREx_DisableLowRegulatorLowVoltage(void) +{ + *(__IO uint32_t *) CR_LPLVDS_BB = (uint32_t)DISABLE; +} + +#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx || + STM32F413xx || STM32F423xx */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ + defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) +/** + * @brief Activates the Over-Drive mode. + * @note This function can be used only for STM32F42xx/STM32F43xx/STM32F446xx/STM32F469xx/STM32F479xx devices. + * This mode allows the CPU and the core logic to operate at a higher frequency + * than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3). + * @note It is recommended to enter or exit Over-drive mode when the application is not running + * critical tasks and when the system clock source is either HSI or HSE. + * During the Over-drive switch activation, no peripheral clocks should be enabled. + * The peripheral clocks must be enabled once the Over-drive mode is activated. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void) +{ + uint32_t tickstart = 0U; + + __HAL_RCC_PWR_CLK_ENABLE(); + + /* Enable the Over-drive to extend the clock frequency to 180 Mhz */ + __HAL_PWR_OVERDRIVE_ENABLE(); + + /* Get tick */ + tickstart = HAL_GetTick(); + + while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY)) + { + if((HAL_GetTick() - tickstart) > PWR_OVERDRIVE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Enable the Over-drive switch */ + __HAL_PWR_OVERDRIVESWITCHING_ENABLE(); + + /* Get tick */ + tickstart = HAL_GetTick(); + + while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY)) + { + if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + return HAL_OK; +} + +/** + * @brief Deactivates the Over-Drive mode. + * @note This function can be used only for STM32F42xx/STM32F43xx/STM32F446xx/STM32F469xx/STM32F479xx devices. + * This mode allows the CPU and the core logic to operate at a higher frequency + * than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3). + * @note It is recommended to enter or exit Over-drive mode when the application is not running + * critical tasks and when the system clock source is either HSI or HSE. + * During the Over-drive switch activation, no peripheral clocks should be enabled. + * The peripheral clocks must be enabled once the Over-drive mode is activated. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void) +{ + uint32_t tickstart = 0U; + + __HAL_RCC_PWR_CLK_ENABLE(); + + /* Disable the Over-drive switch */ + __HAL_PWR_OVERDRIVESWITCHING_DISABLE(); + + /* Get tick */ + tickstart = HAL_GetTick(); + + while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY)) + { + if((HAL_GetTick() - tickstart) > PWR_OVERDRIVE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Disable the Over-drive */ + __HAL_PWR_OVERDRIVE_DISABLE(); + + /* Get tick */ + tickstart = HAL_GetTick(); + + while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY)) + { + if((HAL_GetTick() - tickstart) > PWR_OVERDRIVE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @brief Enters in Under-Drive STOP mode. + * + * @note This mode is only available for STM32F42xxx/STM32F43xxx/STM32F446xx/STM32F469xx/STM32F479xx devices. + * + * @note This mode can be selected only when the Under-Drive is already active + * + * @note This mode is enabled only with STOP low power mode. + * In this mode, the 1.2V domain is preserved in reduced leakage mode. This + * mode is only available when the main regulator or the low power regulator + * is in low voltage mode + * + * @note If the Under-drive mode was enabled, it is automatically disabled after + * exiting Stop mode. + * When the voltage regulator operates in Under-drive mode, an additional + * startup delay is induced when waking up from Stop mode. + * + * @note In Stop mode, all I/O pins keep the same state as in Run mode. + * + * @note When exiting Stop mode by issuing an interrupt or a wake-up event, + * the HSI RC oscillator is selected as system clock. + * + * @note When the voltage regulator operates in low power mode, an additional + * startup delay is incurred when waking up from Stop mode. + * By keeping the internal regulator ON during Stop mode, the consumption + * is higher although the startup time is reduced. + * + * @param Regulator specifies the regulator state in STOP mode. + * This parameter can be one of the following values: + * @arg PWR_MAINREGULATOR_UNDERDRIVE_ON: Main Regulator in under-drive mode + * and Flash memory in power-down when the device is in Stop under-drive mode + * @arg PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON: Low Power Regulator in under-drive mode + * and Flash memory in power-down when the device is in Stop under-drive mode + * @param STOPEntry specifies if STOP mode in entered with WFI or WFE instruction. + * This parameter can be one of the following values: + * @arg PWR_SLEEPENTRY_WFI: enter STOP mode with WFI instruction + * @arg PWR_SLEEPENTRY_WFE: enter STOP mode with WFE instruction + * @retval None + */ +HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry) +{ + uint32_t tmpreg1 = 0U; + + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR_UNDERDRIVE(Regulator)); + assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); + + /* Enable Power ctrl clock */ + __HAL_RCC_PWR_CLK_ENABLE(); + /* Enable the Under-drive Mode ---------------------------------------------*/ + /* Clear Under-drive flag */ + __HAL_PWR_CLEAR_ODRUDR_FLAG(); + + /* Enable the Under-drive */ + __HAL_PWR_UNDERDRIVE_ENABLE(); + + /* Select the regulator state in STOP mode ---------------------------------*/ + tmpreg1 = PWR->CR; + /* Clear PDDS, LPDS, MRLUDS and LPLUDS bits */ + tmpreg1 &= (uint32_t)~(PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_LPUDS | PWR_CR_MRUDS); + + /* Set LPDS, MRLUDS and LPLUDS bits according to PWR_Regulator value */ + tmpreg1 |= Regulator; + + /* Store the new value */ + PWR->CR = tmpreg1; + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; + + /* Select STOP mode entry --------------------------------------------------*/ + if(STOPEntry == PWR_SLEEPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __WFE(); + } + /* Reset SLEEPDEEP bit of Cortex System Control Register */ + SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk); + + return HAL_OK; +} + +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Drivers/stm32f4xx_hal_pwr_ex.h b/libs/hal/stm32f4xx_hal_pwr_ex.h similarity index 97% rename from Drivers/stm32f4xx_hal_pwr_ex.h rename to libs/hal/stm32f4xx_hal_pwr_ex.h index 7b632a5..57fd4d9 100644 --- a/Drivers/stm32f4xx_hal_pwr_ex.h +++ b/libs/hal/stm32f4xx_hal_pwr_ex.h @@ -1,340 +1,340 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_pwr_ex.h - * @author MCD Application Team - * @brief Header file of PWR HAL Extension module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_PWR_EX_H -#define __STM32F4xx_HAL_PWR_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup PWREx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup PWREx_Exported_Constants PWREx Exported Constants - * @{ - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) - -/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode - * @{ - */ -#define PWR_MAINREGULATOR_UNDERDRIVE_ON PWR_CR_MRUDS -#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON ((uint32_t)(PWR_CR_LPDS | PWR_CR_LPUDS)) -/** - * @} - */ - -/** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag - * @{ - */ -#define PWR_FLAG_ODRDY PWR_CSR_ODRDY -#define PWR_FLAG_ODSWRDY PWR_CSR_ODSWRDY -#define PWR_FLAG_UDRDY PWR_CSR_UDSWRDY -/** - * @} - */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ - -/** @defgroup PWREx_Regulator_Voltage_Scale PWREx Regulator Voltage Scale - * @{ - */ -#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx) -#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK = 168 MHz. */ -#define PWR_REGULATOR_VOLTAGE_SCALE2 0x00000000U /* Scale 2 mode: the maximum value of fHCLK = 144 MHz. */ -#else -#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK is 168 MHz. It can be extended to - 180 MHz by activating the over-drive mode. */ -#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR_VOS_1 /* Scale 2 mode: the maximum value of fHCLK is 144 MHz. It can be extended to - 168 MHz by activating the over-drive mode. */ -#define PWR_REGULATOR_VOLTAGE_SCALE3 PWR_CR_VOS_0 /* Scale 3 mode: the maximum value of fHCLK is 120 MHz. */ -#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */ -/** - * @} - */ -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @defgroup PWREx_WakeUp_Pins PWREx WakeUp Pins - * @{ - */ -#define PWR_WAKEUP_PIN2 0x00000080U -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -#define PWR_WAKEUP_PIN3 0x00000040U -#endif /* STM32F410xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Zx || STM32F412Vx || \ - STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ -/** - * @} - */ -#endif /* STM32F410xx || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || - STM32F413xx || STM32F423xx */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup PWREx_Exported_Constants PWREx Exported Constants - * @{ - */ - -#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx) -/** @brief macros configure the main internal regulator output voltage. - * @param __REGULATOR__ specifies the regulator output voltage to achieve - * a tradeoff between performance and power consumption when the device does - * not operate at the maximum frequency (refer to the datasheets for more details). - * This parameter can be one of the following values: - * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode - * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode - * @retval None - */ -#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \ - __IO uint32_t tmpreg = 0x00U; \ - MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \ - UNUSED(tmpreg); \ - } while(0U) -#else -/** @brief macros configure the main internal regulator output voltage. - * @param __REGULATOR__ specifies the regulator output voltage to achieve - * a tradeoff between performance and power consumption when the device does - * not operate at the maximum frequency (refer to the datasheets for more details). - * This parameter can be one of the following values: - * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode - * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode - * @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode - * @retval None - */ -#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \ - __IO uint32_t tmpreg = 0x00U; \ - MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** @brief Macros to enable or disable the Over drive mode. - * @note These macros can be used only for STM32F42xx/STM3243xx devices. - */ -#define __HAL_PWR_OVERDRIVE_ENABLE() (*(__IO uint32_t *) CR_ODEN_BB = ENABLE) -#define __HAL_PWR_OVERDRIVE_DISABLE() (*(__IO uint32_t *) CR_ODEN_BB = DISABLE) - -/** @brief Macros to enable or disable the Over drive switching. - * @note These macros can be used only for STM32F42xx/STM3243xx devices. - */ -#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = ENABLE) -#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = DISABLE) - -/** @brief Macros to enable or disable the Under drive mode. - * @note This mode is enabled only with STOP low power mode. - * In this mode, the 1.2V domain is preserved in reduced leakage mode. This - * mode is only available when the main regulator or the low power regulator - * is in low voltage mode. - * @note If the Under-drive mode was enabled, it is automatically disabled after - * exiting Stop mode. - * When the voltage regulator operates in Under-drive mode, an additional - * startup delay is induced when waking up from Stop mode. - */ -#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR |= (uint32_t)PWR_CR_UDEN) -#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR &= (uint32_t)(~PWR_CR_UDEN)) - -/** @brief Check PWR flag is set or not. - * @note These macros can be used only for STM32F42xx/STM3243xx devices. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode - * is ready - * @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode - * switching is ready - * @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode - * is enabled in Stop mode - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__)) - -/** @brief Clear the Under-Drive Ready flag. - * @note These macros can be used only for STM32F42xx/STM3243xx devices. - */ -#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR |= PWR_FLAG_UDRDY) - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions - * @{ - */ - -/** @addtogroup PWREx_Exported_Functions_Group1 - * @{ - */ -void HAL_PWREx_EnableFlashPowerDown(void); -void HAL_PWREx_DisableFlashPowerDown(void); -HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void); -HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void); -uint32_t HAL_PWREx_GetVoltageRange(void); -HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling); - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F401xC) ||\ - defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\ - defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -void HAL_PWREx_EnableMainRegulatorLowVoltage(void); -void HAL_PWREx_DisableMainRegulatorLowVoltage(void); -void HAL_PWREx_EnableLowRegulatorLowVoltage(void); -void HAL_PWREx_DisableLowRegulatorLowVoltage(void); -#endif /* STM32F410xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F412Zx || STM32F412Vx ||\ - STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) -HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void); -HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void); -HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry); -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ - -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup PWREx_Private_Constants PWREx Private Constants - * @{ - */ - -/** @defgroup PWREx_register_alias_address PWREx Register alias address - * @{ - */ -/* ------------- PWR registers bit address in the alias region ---------------*/ -/* --- CR Register ---*/ -/* Alias word address of FPDS bit */ -#define FPDS_BIT_NUMBER PWR_CR_FPDS_Pos -#define CR_FPDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (FPDS_BIT_NUMBER * 4U)) - -/* Alias word address of ODEN bit */ -#define ODEN_BIT_NUMBER PWR_CR_ODEN_Pos -#define CR_ODEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODEN_BIT_NUMBER * 4U)) - -/* Alias word address of ODSWEN bit */ -#define ODSWEN_BIT_NUMBER PWR_CR_ODSWEN_Pos -#define CR_ODSWEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODSWEN_BIT_NUMBER * 4U)) - -/* Alias word address of MRLVDS bit */ -#define MRLVDS_BIT_NUMBER PWR_CR_MRLVDS_Pos -#define CR_MRLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (MRLVDS_BIT_NUMBER * 4U)) - -/* Alias word address of LPLVDS bit */ -#define LPLVDS_BIT_NUMBER PWR_CR_LPLVDS_Pos -#define CR_LPLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (LPLVDS_BIT_NUMBER * 4U)) - - /** - * @} - */ - -/** @defgroup PWREx_CSR_register_alias PWRx CSR Register alias address - * @{ - */ -/* --- CSR Register ---*/ -/* Alias word address of BRE bit */ -#define BRE_BIT_NUMBER PWR_CSR_BRE_Pos -#define CSR_BRE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (BRE_BIT_NUMBER * 4U)) - -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup PWREx_Private_Macros PWREx Private Macros - * @{ - */ - -/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters - * @{ - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \ - ((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx) -#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ - ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2)) -#else -#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ - ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \ - ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3)) -#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */ - -#if defined(STM32F446xx) -#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2)) -#elif defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\ - defined(STM32F423xx) -#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2) || \ - ((PIN) == PWR_WAKEUP_PIN3)) -#else -#define IS_PWR_WAKEUP_PIN(PIN) ((PIN) == PWR_WAKEUP_PIN1) -#endif /* STM32F446xx */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F4xx_HAL_PWR_EX_H */ +/** + ****************************************************************************** + * @file stm32f4xx_hal_pwr_ex.h + * @author MCD Application Team + * @brief Header file of PWR HAL Extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_PWR_EX_H +#define __STM32F4xx_HAL_PWR_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup PWREx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PWREx_Exported_Constants PWREx Exported Constants + * @{ + */ +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ + defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) + +/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode + * @{ + */ +#define PWR_MAINREGULATOR_UNDERDRIVE_ON PWR_CR_MRUDS +#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON ((uint32_t)(PWR_CR_LPDS | PWR_CR_LPUDS)) +/** + * @} + */ + +/** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag + * @{ + */ +#define PWR_FLAG_ODRDY PWR_CSR_ODRDY +#define PWR_FLAG_ODSWRDY PWR_CSR_ODSWRDY +#define PWR_FLAG_UDRDY PWR_CSR_UDSWRDY +/** + * @} + */ +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ + +/** @defgroup PWREx_Regulator_Voltage_Scale PWREx Regulator Voltage Scale + * @{ + */ +#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx) +#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK = 168 MHz. */ +#define PWR_REGULATOR_VOLTAGE_SCALE2 0x00000000U /* Scale 2 mode: the maximum value of fHCLK = 144 MHz. */ +#else +#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK is 168 MHz. It can be extended to + 180 MHz by activating the over-drive mode. */ +#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR_VOS_1 /* Scale 2 mode: the maximum value of fHCLK is 144 MHz. It can be extended to + 168 MHz by activating the over-drive mode. */ +#define PWR_REGULATOR_VOLTAGE_SCALE3 PWR_CR_VOS_0 /* Scale 3 mode: the maximum value of fHCLK is 120 MHz. */ +#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */ +/** + * @} + */ +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ + defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +/** @defgroup PWREx_WakeUp_Pins PWREx WakeUp Pins + * @{ + */ +#define PWR_WAKEUP_PIN2 0x00000080U +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ + defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +#define PWR_WAKEUP_PIN3 0x00000040U +#endif /* STM32F410xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Zx || STM32F412Vx || \ + STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ +/** + * @} + */ +#endif /* STM32F410xx || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || + STM32F413xx || STM32F423xx */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup PWREx_Exported_Constants PWREx Exported Constants + * @{ + */ + +#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx) +/** @brief macros configure the main internal regulator output voltage. + * @param __REGULATOR__ specifies the regulator output voltage to achieve + * a tradeoff between performance and power consumption when the device does + * not operate at the maximum frequency (refer to the datasheets for more details). + * This parameter can be one of the following values: + * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode + * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode + * @retval None + */ +#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \ + __IO uint32_t tmpreg = 0x00U; \ + MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \ + UNUSED(tmpreg); \ + } while(0U) +#else +/** @brief macros configure the main internal regulator output voltage. + * @param __REGULATOR__ specifies the regulator output voltage to achieve + * a tradeoff between performance and power consumption when the device does + * not operate at the maximum frequency (refer to the datasheets for more details). + * This parameter can be one of the following values: + * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode + * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode + * @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode + * @retval None + */ +#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \ + __IO uint32_t tmpreg = 0x00U; \ + MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \ + UNUSED(tmpreg); \ + } while(0U) +#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ + defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) +/** @brief Macros to enable or disable the Over drive mode. + * @note These macros can be used only for STM32F42xx/STM3243xx devices. + */ +#define __HAL_PWR_OVERDRIVE_ENABLE() (*(__IO uint32_t *) CR_ODEN_BB = ENABLE) +#define __HAL_PWR_OVERDRIVE_DISABLE() (*(__IO uint32_t *) CR_ODEN_BB = DISABLE) + +/** @brief Macros to enable or disable the Over drive switching. + * @note These macros can be used only for STM32F42xx/STM3243xx devices. + */ +#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = ENABLE) +#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = DISABLE) + +/** @brief Macros to enable or disable the Under drive mode. + * @note This mode is enabled only with STOP low power mode. + * In this mode, the 1.2V domain is preserved in reduced leakage mode. This + * mode is only available when the main regulator or the low power regulator + * is in low voltage mode. + * @note If the Under-drive mode was enabled, it is automatically disabled after + * exiting Stop mode. + * When the voltage regulator operates in Under-drive mode, an additional + * startup delay is induced when waking up from Stop mode. + */ +#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR |= (uint32_t)PWR_CR_UDEN) +#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR &= (uint32_t)(~PWR_CR_UDEN)) + +/** @brief Check PWR flag is set or not. + * @note These macros can be used only for STM32F42xx/STM3243xx devices. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode + * is ready + * @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode + * switching is ready + * @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode + * is enabled in Stop mode + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the Under-Drive Ready flag. + * @note These macros can be used only for STM32F42xx/STM3243xx devices. + */ +#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR |= PWR_FLAG_UDRDY) + +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions + * @{ + */ + +/** @addtogroup PWREx_Exported_Functions_Group1 + * @{ + */ +void HAL_PWREx_EnableFlashPowerDown(void); +void HAL_PWREx_DisableFlashPowerDown(void); +HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void); +HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void); +uint32_t HAL_PWREx_GetVoltageRange(void); +HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling); + +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F401xC) ||\ + defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\ + defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +void HAL_PWREx_EnableMainRegulatorLowVoltage(void); +void HAL_PWREx_DisableMainRegulatorLowVoltage(void); +void HAL_PWREx_EnableLowRegulatorLowVoltage(void); +void HAL_PWREx_DisableLowRegulatorLowVoltage(void); +#endif /* STM32F410xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F412Zx || STM32F412Vx ||\ + STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) ||\ + defined(STM32F469xx) || defined(STM32F479xx) +HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void); +HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void); +HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry); +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ + +/** + * @} + */ + +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup PWREx_Private_Constants PWREx Private Constants + * @{ + */ + +/** @defgroup PWREx_register_alias_address PWREx Register alias address + * @{ + */ +/* ------------- PWR registers bit address in the alias region ---------------*/ +/* --- CR Register ---*/ +/* Alias word address of FPDS bit */ +#define FPDS_BIT_NUMBER PWR_CR_FPDS_Pos +#define CR_FPDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (FPDS_BIT_NUMBER * 4U)) + +/* Alias word address of ODEN bit */ +#define ODEN_BIT_NUMBER PWR_CR_ODEN_Pos +#define CR_ODEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODEN_BIT_NUMBER * 4U)) + +/* Alias word address of ODSWEN bit */ +#define ODSWEN_BIT_NUMBER PWR_CR_ODSWEN_Pos +#define CR_ODSWEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODSWEN_BIT_NUMBER * 4U)) + +/* Alias word address of MRLVDS bit */ +#define MRLVDS_BIT_NUMBER PWR_CR_MRLVDS_Pos +#define CR_MRLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (MRLVDS_BIT_NUMBER * 4U)) + +/* Alias word address of LPLVDS bit */ +#define LPLVDS_BIT_NUMBER PWR_CR_LPLVDS_Pos +#define CR_LPLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (LPLVDS_BIT_NUMBER * 4U)) + + /** + * @} + */ + +/** @defgroup PWREx_CSR_register_alias PWRx CSR Register alias address + * @{ + */ +/* --- CSR Register ---*/ +/* Alias word address of BRE bit */ +#define BRE_BIT_NUMBER PWR_CSR_BRE_Pos +#define CSR_BRE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (BRE_BIT_NUMBER * 4U)) + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PWREx_Private_Macros PWREx Private Macros + * @{ + */ + +/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters + * @{ + */ +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ + defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) +#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \ + ((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON)) +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ + +#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx) +#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ + ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2)) +#else +#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ + ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \ + ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3)) +#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */ + +#if defined(STM32F446xx) +#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2)) +#elif defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F412Zx) ||\ + defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\ + defined(STM32F423xx) +#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2) || \ + ((PIN) == PWR_WAKEUP_PIN3)) +#else +#define IS_PWR_WAKEUP_PIN(PIN) ((PIN) == PWR_WAKEUP_PIN1) +#endif /* STM32F446xx */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32F4xx_HAL_PWR_EX_H */ diff --git a/Drivers/stm32f4xx_hal_rcc.c b/libs/hal/stm32f4xx_hal_rcc.c similarity index 97% rename from Drivers/stm32f4xx_hal_rcc.c rename to libs/hal/stm32f4xx_hal_rcc.c index 79364b6..f187348 100644 --- a/Drivers/stm32f4xx_hal_rcc.c +++ b/libs/hal/stm32f4xx_hal_rcc.c @@ -1,1122 +1,1122 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_rcc.c - * @author MCD Application Team - * @brief RCC HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Reset and Clock Control (RCC) peripheral: - * + Initialization and de-initialization functions - * + Peripheral Control functions - * - @verbatim - ============================================================================== - ##### RCC specific features ##### - ============================================================================== - [..] - After reset the device is running from Internal High Speed oscillator - (HSI 16MHz) with Flash 0 wait state, Flash prefetch buffer, D-Cache - and I-Cache are disabled, and all peripherals are off except internal - SRAM, Flash and JTAG. - (+) There is no prescaler on High speed (AHB) and Low speed (APB) busses; - all peripherals mapped on these busses are running at HSI speed. - (+) The clock for all peripherals is switched off, except the SRAM and FLASH. - (+) All GPIOs are in input floating state, except the JTAG pins which - are assigned to be used for debug purpose. - - [..] - Once the device started from reset, the user application has to: - (+) Configure the clock source to be used to drive the System clock - (if the application needs higher frequency/performance) - (+) Configure the System clock frequency and Flash settings - (+) Configure the AHB and APB busses prescalers - (+) Enable the clock for the peripheral(s) to be used - (+) Configure the clock source(s) for peripherals which clocks are not - derived from the System clock (I2S, RTC, ADC, USB OTG FS/SDIO/RNG) - - ##### RCC Limitations ##### - ============================================================================== - [..] - A delay between an RCC peripheral clock enable and the effective peripheral - enabling should be taken into account in order to manage the peripheral read/write - from/to registers. - (+) This delay depends on the peripheral mapping. - (+) If peripheral is mapped on AHB: the delay is 2 AHB clock cycle - after the clock enable bit is set on the hardware register - (+) If peripheral is mapped on APB: the delay is 2 APB clock cycle - after the clock enable bit is set on the hardware register - - [..] - Implemented Workaround: - (+) For AHB & APB peripherals, a dummy read to the peripheral register has been - inserted in each __HAL_RCC_PPP_CLK_ENABLE() macro. - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup RCC RCC - * @brief RCC HAL module driver - * @{ - */ - -#ifdef HAL_RCC_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup RCC_Private_Constants - * @{ - */ - -/* Private macro -------------------------------------------------------------*/ -#define __MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() -#define MCO1_GPIO_PORT GPIOA -#define MCO1_PIN GPIO_PIN_8 - -#define __MCO2_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() -#define MCO2_GPIO_PORT GPIOC -#define MCO2_PIN GPIO_PIN_9 -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/** @defgroup RCC_Private_Variables RCC Private Variables - * @{ - */ -/** - * @} - */ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup RCC_Exported_Functions RCC Exported Functions - * @{ - */ - -/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] - This section provides functions allowing to configure the internal/external oscillators - (HSE, HSI, LSE, LSI, PLL, CSS and MCO) and the System busses clocks (SYSCLK, AHB, APB1 - and APB2). - - [..] Internal/external clock and PLL configuration - (#) HSI (high-speed internal), 16 MHz factory-trimmed RC used directly or through - the PLL as System clock source. - - (#) LSI (low-speed internal), 32 KHz low consumption RC used as IWDG and/or RTC - clock source. - - (#) HSE (high-speed external), 4 to 26 MHz crystal oscillator used directly or - through the PLL as System clock source. Can be used also as RTC clock source. - - (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source. - - (#) PLL (clocked by HSI or HSE), featuring two different output clocks: - (++) The first output is used to generate the high speed system clock (up to 168 MHz) - (++) The second output is used to generate the clock for the USB OTG FS (48 MHz), - the random analog generator (<=48 MHz) and the SDIO (<= 48 MHz). - - (#) CSS (Clock security system), once enable using the macro __HAL_RCC_CSS_ENABLE() - and if a HSE clock failure occurs(HSE used directly or through PLL as System - clock source), the System clocks automatically switched to HSI and an interrupt - is generated if enabled. The interrupt is linked to the Cortex-M4 NMI - (Non-Maskable Interrupt) exception vector. - - (#) MCO1 (microcontroller clock output), used to output HSI, LSE, HSE or PLL - clock (through a configurable prescaler) on PA8 pin. - - (#) MCO2 (microcontroller clock output), used to output HSE, PLL, SYSCLK or PLLI2S - clock (through a configurable prescaler) on PC9 pin. - - [..] System, AHB and APB busses clocks configuration - (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI, - HSE and PLL. - The AHB clock (HCLK) is derived from System clock through configurable - prescaler and used to clock the CPU, memory and peripherals mapped - on AHB bus (DMA, GPIO...). APB1 (PCLK1) and APB2 (PCLK2) clocks are derived - from AHB clock through configurable prescalers and used to clock - the peripherals mapped on these busses. You can use - "HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks. - - (#) For the STM32F405xx/07xx and STM32F415xx/17xx devices, the maximum - frequency of the SYSCLK and HCLK is 168 MHz, PCLK2 84 MHz and PCLK1 42 MHz. - Depending on the device voltage range, the maximum frequency should - be adapted accordingly (refer to the product datasheets for more details). - - (#) For the STM32F42xxx, STM32F43xxx, STM32F446xx, STM32F469xx and STM32F479xx devices, - the maximum frequency of the SYSCLK and HCLK is 180 MHz, PCLK2 90 MHz and PCLK1 45 MHz. - Depending on the device voltage range, the maximum frequency should - be adapted accordingly (refer to the product datasheets for more details). - - (#) For the STM32F401xx, the maximum frequency of the SYSCLK and HCLK is 84 MHz, - PCLK2 84 MHz and PCLK1 42 MHz. - Depending on the device voltage range, the maximum frequency should - be adapted accordingly (refer to the product datasheets for more details). - - (#) For the STM32F41xxx, the maximum frequency of the SYSCLK and HCLK is 100 MHz, - PCLK2 100 MHz and PCLK1 50 MHz. - Depending on the device voltage range, the maximum frequency should - be adapted accordingly (refer to the product datasheets for more details). - -@endverbatim - * @{ - */ - -/** - * @brief Resets the RCC clock configuration to the default reset state. - * @note The default reset state of the clock configuration is given below: - * - HSI ON and used as system clock source - * - HSE and PLL OFF - * - AHB, APB1 and APB2 prescaler set to 1. - * - CSS, MCO1 and MCO2 OFF - * - All interrupts disabled - * @note This function doesn't modify the configuration of the - * - Peripheral clocks - * - LSI, LSE and RTC clocks - * @retval HAL status - */ -__weak HAL_StatusTypeDef HAL_RCC_DeInit(void) -{ - return HAL_OK; -} - -/** - * @brief Initializes the RCC Oscillators according to the specified parameters in the - * RCC_OscInitTypeDef. - * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that - * contains the configuration information for the RCC Oscillators. - * @note The PLL is not disabled when used as system clock. - * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not - * supported by this API. User should request a transition to LSE Off - * first and then LSE On or LSE Bypass. - * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not - * supported by this API. User should request a transition to HSE Off - * first and then HSE On or HSE Bypass. - * @retval HAL status - */ -__weak HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) -{ - uint32_t tickstart, pll_config; - - /* Check Null pointer */ - if(RCC_OscInitStruct == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); - /*------------------------------- HSE Configuration ------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) - { - /* Check the parameters */ - assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); - /* When the HSE is used as system clock or clock source for PLL in these cases HSE will not disabled */ - if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSE) ||\ - ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE))) - { - if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) - { - return HAL_ERROR; - } - } - else - { - /* Set the new HSE configuration ---------------------------------------*/ - __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); - - /* Check the HSE State */ - if((RCC_OscInitStruct->HSEState) != RCC_HSE_OFF) - { - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till HSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till HSE is bypassed or disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - } - /*----------------------------- HSI Configuration --------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) - { - /* Check the parameters */ - assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); - assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); - - /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */ - if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSI) ||\ - ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI))) - { - /* When HSI is used as system clock it will not disabled */ - if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON)) - { - return HAL_ERROR; - } - /* Otherwise, just the calibration is allowed */ - else - { - /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ - __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); - } - } - else - { - /* Check the HSI State */ - if((RCC_OscInitStruct->HSIState)!= RCC_HSI_OFF) - { - /* Enable the Internal High Speed oscillator (HSI). */ - __HAL_RCC_HSI_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Adjusts the Internal High Speed oscillator (HSI) calibration value. */ - __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); - } - else - { - /* Disable the Internal High Speed oscillator (HSI). */ - __HAL_RCC_HSI_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - } - /*------------------------------ LSI Configuration -------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) - { - /* Check the parameters */ - assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); - - /* Check the LSI State */ - if((RCC_OscInitStruct->LSIState)!= RCC_LSI_OFF) - { - /* Enable the Internal Low Speed oscillator (LSI). */ - __HAL_RCC_LSI_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Disable the Internal Low Speed oscillator (LSI). */ - __HAL_RCC_LSI_DISABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - /*------------------------------ LSE Configuration -------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) - { - FlagStatus pwrclkchanged = RESET; - - /* Check the parameters */ - assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); - - /* Update LSE configuration in Backup Domain control register */ - /* Requires to enable write access to Backup Domain of necessary */ - if(__HAL_RCC_PWR_IS_CLK_DISABLED()) - { - __HAL_RCC_PWR_CLK_ENABLE(); - pwrclkchanged = SET; - } - - if(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) - { - /* Enable write access to Backup domain */ - SET_BIT(PWR->CR, PWR_CR_DBP); - - /* Wait for Backup domain Write protection disable */ - tickstart = HAL_GetTick(); - - while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) - { - if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - - /* Set the new LSE configuration -----------------------------------------*/ - __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); - /* Check the LSE State */ - if((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF) - { - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - - /* Restore clock configuration if changed */ - if(pwrclkchanged == SET) - { - __HAL_RCC_PWR_CLK_DISABLE(); - } - } - /*-------------------------------- PLL Configuration -----------------------*/ - /* Check the parameters */ - assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); - if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE) - { - /* Check if the PLL is used as system clock or not */ - if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL) - { - if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON) - { - /* Check the parameters */ - assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); - assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM)); - assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN)); - assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP)); - assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ)); - - /* Disable the main PLL. */ - __HAL_RCC_PLL_DISABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till PLL is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Configure the main PLL clock source, multiplication and division factors. */ - WRITE_REG(RCC->PLLCFGR, (RCC_OscInitStruct->PLL.PLLSource | \ - RCC_OscInitStruct->PLL.PLLM | \ - (RCC_OscInitStruct->PLL.PLLN << RCC_PLLCFGR_PLLN_Pos) | \ - (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U) << RCC_PLLCFGR_PLLP_Pos) | \ - (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos))); - /* Enable the main PLL. */ - __HAL_RCC_PLL_ENABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till PLL is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Disable the main PLL. */ - __HAL_RCC_PLL_DISABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till PLL is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - else - { - /* Check if there is a request to disable the PLL used as System clock source */ - if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) - { - return HAL_ERROR; - } - else - { - /* Do not return HAL_ERROR if request repeats the current configuration */ - pll_config = RCC->PLLCFGR; -#if defined (RCC_PLLCFGR_PLLR) - if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != (RCC_OscInitStruct->PLL.PLLM) << RCC_PLLCFGR_PLLM_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN) << RCC_PLLCFGR_PLLN_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U)) << RCC_PLLCFGR_PLLP_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos)) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLR) != (RCC_OscInitStruct->PLL.PLLR << RCC_PLLCFGR_PLLR_Pos))) -#else - if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != (RCC_OscInitStruct->PLL.PLLM) << RCC_PLLCFGR_PLLM_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN) << RCC_PLLCFGR_PLLN_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U)) << RCC_PLLCFGR_PLLP_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos))) -#endif - { - return HAL_ERROR; - } - } - } - } - return HAL_OK; -} - -/** - * @brief Initializes the CPU, AHB and APB busses clocks according to the specified - * parameters in the RCC_ClkInitStruct. - * @param RCC_ClkInitStruct pointer to an RCC_OscInitTypeDef structure that - * contains the configuration information for the RCC peripheral. - * @param FLatency FLASH Latency, this parameter depend on device selected - * - * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency - * and updated by HAL_RCC_GetHCLKFreq() function called within this function - * - * @note The HSI is used (enabled by hardware) as system clock source after - * startup from Reset, wake-up from STOP and STANDBY mode, or in case - * of failure of the HSE used directly or indirectly as system clock - * (if the Clock Security System CSS is enabled). - * - * @note A switch from one clock source to another occurs only if the target - * clock source is ready (clock stable after startup delay or PLL locked). - * If a clock source which is not yet ready is selected, the switch will - * occur when the clock source will be ready. - * - * @note Depending on the device voltage range, the software has to set correctly - * HPRE[3:0] bits to ensure that HCLK not exceed the maximum allowed frequency - * (for more details refer to section above "Initialization/de-initialization functions") - * @retval None - */ -HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency) -{ - uint32_t tickstart; - - /* Check Null pointer */ - if(RCC_ClkInitStruct == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType)); - assert_param(IS_FLASH_LATENCY(FLatency)); - - /* To correctly read data from FLASH memory, the number of wait states (LATENCY) - must be correctly programmed according to the frequency of the CPU clock - (HCLK) and the supply voltage of the device. */ - - /* Increasing the number of wait states because of higher CPU frequency */ - if(FLatency > __HAL_FLASH_GET_LATENCY()) - { - /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ - __HAL_FLASH_SET_LATENCY(FLatency); - - /* Check that the new number of wait states is taken into account to access the Flash - memory by reading the FLASH_ACR register */ - if(__HAL_FLASH_GET_LATENCY() != FLatency) - { - return HAL_ERROR; - } - } - - /*-------------------------- HCLK Configuration --------------------------*/ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) - { - /* Set the highest APBx dividers in order to ensure that we do not go through - a non-spec phase whatever we decrease or increase HCLK. */ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) - { - MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_HCLK_DIV16); - } - - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) - { - MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, (RCC_HCLK_DIV16 << 3)); - } - - assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); - MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); - } - - /*------------------------- SYSCLK Configuration ---------------------------*/ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) - { - assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource)); - - /* HSE is selected as System Clock Source */ - if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) - { - /* Check the HSE ready flag */ - if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) - { - return HAL_ERROR; - } - } - /* PLL is selected as System Clock Source */ - else if((RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) || - (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLRCLK)) - { - /* Check the PLL ready flag */ - if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) - { - return HAL_ERROR; - } - } - /* HSI is selected as System Clock Source */ - else - { - /* Check the HSI ready flag */ - if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) - { - return HAL_ERROR; - } - } - - __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) - { - if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - - /* Decreasing the number of wait states because of lower CPU frequency */ - if(FLatency < __HAL_FLASH_GET_LATENCY()) - { - /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ - __HAL_FLASH_SET_LATENCY(FLatency); - - /* Check that the new number of wait states is taken into account to access the Flash - memory by reading the FLASH_ACR register */ - if(__HAL_FLASH_GET_LATENCY() != FLatency) - { - return HAL_ERROR; - } - } - - /*-------------------------- PCLK1 Configuration ---------------------------*/ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) - { - assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider)); - MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_ClkInitStruct->APB1CLKDivider); - } - - /*-------------------------- PCLK2 Configuration ---------------------------*/ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) - { - assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider)); - MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, ((RCC_ClkInitStruct->APB2CLKDivider) << 3U)); - } - - /* Update the SystemCoreClock global variable */ - SystemCoreClock = HAL_RCC_GetSysClockFreq() >> AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> RCC_CFGR_HPRE_Pos]; - - /* Configure the source of time base considering new system clocks settings */ - HAL_InitTick (uwTickPrio); - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions - * @brief RCC clocks control functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the RCC Clocks - frequencies. - -@endverbatim - * @{ - */ - -/** - * @brief Selects the clock source to output on MCO1 pin(PA8) or on MCO2 pin(PC9). - * @note PA8/PC9 should be configured in alternate function mode. - * @param RCC_MCOx specifies the output direction for the clock source. - * This parameter can be one of the following values: - * @arg RCC_MCO1: Clock source to output on MCO1 pin(PA8). - * @arg RCC_MCO2: Clock source to output on MCO2 pin(PC9). - * @param RCC_MCOSource specifies the clock source to output. - * This parameter can be one of the following values: - * @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source - * @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source - * @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source - * @arg RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source - * @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source - * @arg RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source, available for all STM32F4 devices except STM32F410xx - * @arg RCC_MCO2SOURCE_I2SCLK: I2SCLK clock selected as MCO2 source, available only for STM32F410Rx devices - * @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source - * @arg RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source - * @param RCC_MCODiv specifies the MCOx prescaler. - * This parameter can be one of the following values: - * @arg RCC_MCODIV_1: no division applied to MCOx clock - * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock - * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock - * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock - * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock - * @note For STM32F410Rx devices to output I2SCLK clock on MCO2 you should have - * at last one of the SPI clocks enabled (SPI1, SPI2 or SPI5). - * @retval None - */ -void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv) -{ - GPIO_InitTypeDef GPIO_InitStruct; - /* Check the parameters */ - assert_param(IS_RCC_MCO(RCC_MCOx)); - assert_param(IS_RCC_MCODIV(RCC_MCODiv)); - /* RCC_MCO1 */ - if(RCC_MCOx == RCC_MCO1) - { - assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource)); - - /* MCO1 Clock Enable */ - __MCO1_CLK_ENABLE(); - - /* Configure the MCO1 pin in alternate function mode */ - GPIO_InitStruct.Pin = MCO1_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF0_MCO; - HAL_GPIO_Init(MCO1_GPIO_PORT, &GPIO_InitStruct); - - /* Mask MCO1 and MCO1PRE[2:0] bits then Select MCO1 clock source and prescaler */ - MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), (RCC_MCOSource | RCC_MCODiv)); - - /* This RCC MCO1 enable feature is available only on STM32F410xx devices */ -#if defined(RCC_CFGR_MCO1EN) - __HAL_RCC_MCO1_ENABLE(); -#endif /* RCC_CFGR_MCO1EN */ - } -#if defined(RCC_CFGR_MCO2) - else - { - assert_param(IS_RCC_MCO2SOURCE(RCC_MCOSource)); - - /* MCO2 Clock Enable */ - __MCO2_CLK_ENABLE(); - - /* Configure the MCO2 pin in alternate function mode */ - GPIO_InitStruct.Pin = MCO2_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF0_MCO; - HAL_GPIO_Init(MCO2_GPIO_PORT, &GPIO_InitStruct); - - /* Mask MCO2 and MCO2PRE[2:0] bits then Select MCO2 clock source and prescaler */ - MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), (RCC_MCOSource | (RCC_MCODiv << 3U))); - - /* This RCC MCO2 enable feature is available only on STM32F410Rx devices */ -#if defined(RCC_CFGR_MCO2EN) - __HAL_RCC_MCO2_ENABLE(); -#endif /* RCC_CFGR_MCO2EN */ - } -#endif /* RCC_CFGR_MCO2 */ -} - -/** - * @brief Enables the Clock Security System. - * @note If a failure is detected on the HSE oscillator clock, this oscillator - * is automatically disabled and an interrupt is generated to inform the - * software about the failure (Clock Security System Interrupt, CSSI), - * allowing the MCU to perform rescue operations. The CSSI is linked to - * the Cortex-M4 NMI (Non-Maskable Interrupt) exception vector. - * @retval None - */ -void HAL_RCC_EnableCSS(void) -{ - *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)ENABLE; -} - -/** - * @brief Disables the Clock Security System. - * @retval None - */ -void HAL_RCC_DisableCSS(void) -{ - *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)DISABLE; -} - -/** - * @brief Returns the SYSCLK frequency - * - * @note The system frequency computed by this function is not the real - * frequency in the chip. It is calculated based on the predefined - * constant and the selected clock source: - * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*) - * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**) - * @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(**) - * or HSI_VALUE(*) multiplied/divided by the PLL factors. - * @note (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value - * 16 MHz) but the real value may vary depending on the variations - * in voltage and temperature. - * @note (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value - * 25 MHz), user has to ensure that HSE_VALUE is same as the real - * frequency of the crystal used. Otherwise, this function may - * have wrong result. - * - * @note The result of this function could be not correct when using fractional - * value for HSE crystal. - * - * @note This function can be used by the user application to compute the - * baudrate for the communication peripherals or configure other parameters. - * - * @note Each time SYSCLK changes, this function must be called to update the - * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. - * - * - * @retval SYSCLK frequency - */ -__weak uint32_t HAL_RCC_GetSysClockFreq(void) -{ - uint32_t pllm = 0U, pllvco = 0U, pllp = 0U; - uint32_t sysclockfreq = 0U; - - /* Get SYSCLK source -------------------------------------------------------*/ - switch (RCC->CFGR & RCC_CFGR_SWS) - { - case RCC_CFGR_SWS_HSI: /* HSI used as system clock source */ - { - sysclockfreq = HSI_VALUE; - break; - } - case RCC_CFGR_SWS_HSE: /* HSE used as system clock source */ - { - sysclockfreq = HSE_VALUE; - break; - } - case RCC_CFGR_SWS_PLL: /* PLL used as system clock source */ - { - /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN - SYSCLK = PLL_VCO / PLLP */ - pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; - if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI) - { - /* HSE used as PLL clock source */ - pllvco = (uint32_t) ((((uint64_t) HSE_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm); - } - else - { - /* HSI used as PLL clock source */ - pllvco = (uint32_t) ((((uint64_t) HSI_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm); - } - pllp = ((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> RCC_PLLCFGR_PLLP_Pos) + 1U) *2U); - - sysclockfreq = pllvco/pllp; - break; - } - default: - { - sysclockfreq = HSI_VALUE; - break; - } - } - return sysclockfreq; -} - -/** - * @brief Returns the HCLK frequency - * @note Each time HCLK changes, this function must be called to update the - * right HCLK value. Otherwise, any configuration based on this function will be incorrect. - * - * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency - * and updated within this function - * @retval HCLK frequency - */ -uint32_t HAL_RCC_GetHCLKFreq(void) -{ - return SystemCoreClock; -} - -/** - * @brief Returns the PCLK1 frequency - * @note Each time PCLK1 changes, this function must be called to update the - * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect. - * @retval PCLK1 frequency - */ -uint32_t HAL_RCC_GetPCLK1Freq(void) -{ - /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/ - return (HAL_RCC_GetHCLKFreq() >> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE1)>> RCC_CFGR_PPRE1_Pos]); -} - -/** - * @brief Returns the PCLK2 frequency - * @note Each time PCLK2 changes, this function must be called to update the - * right PCLK2 value. Otherwise, any configuration based on this function will be incorrect. - * @retval PCLK2 frequency - */ -uint32_t HAL_RCC_GetPCLK2Freq(void) -{ - /* Get HCLK source and Compute PCLK2 frequency ---------------------------*/ - return (HAL_RCC_GetHCLKFreq()>> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE2)>> RCC_CFGR_PPRE2_Pos]); -} - -/** - * @brief Configures the RCC_OscInitStruct according to the internal - * RCC configuration registers. - * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that - * will be configured. - * @retval None - */ -__weak void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) -{ - /* Set all possible values for the Oscillator type parameter ---------------*/ - RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI; - - /* Get the HSE configuration -----------------------------------------------*/ - if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP) - { - RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS; - } - else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON) - { - RCC_OscInitStruct->HSEState = RCC_HSE_ON; - } - else - { - RCC_OscInitStruct->HSEState = RCC_HSE_OFF; - } - - /* Get the HSI configuration -----------------------------------------------*/ - if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION) - { - RCC_OscInitStruct->HSIState = RCC_HSI_ON; - } - else - { - RCC_OscInitStruct->HSIState = RCC_HSI_OFF; - } - - RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos); - - /* Get the LSE configuration -----------------------------------------------*/ - if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP) - { - RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS; - } - else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON) - { - RCC_OscInitStruct->LSEState = RCC_LSE_ON; - } - else - { - RCC_OscInitStruct->LSEState = RCC_LSE_OFF; - } - - /* Get the LSI configuration -----------------------------------------------*/ - if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION) - { - RCC_OscInitStruct->LSIState = RCC_LSI_ON; - } - else - { - RCC_OscInitStruct->LSIState = RCC_LSI_OFF; - } - - /* Get the PLL configuration -----------------------------------------------*/ - if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON) - { - RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON; - } - else - { - RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF; - } - RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC); - RCC_OscInitStruct->PLL.PLLM = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM); - RCC_OscInitStruct->PLL.PLLN = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos); - RCC_OscInitStruct->PLL.PLLP = (uint32_t)((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) + RCC_PLLCFGR_PLLP_0) << 1U) >> RCC_PLLCFGR_PLLP_Pos); - RCC_OscInitStruct->PLL.PLLQ = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos); -} - -/** - * @brief Configures the RCC_ClkInitStruct according to the internal - * RCC configuration registers. - * @param RCC_ClkInitStruct pointer to an RCC_ClkInitTypeDef structure that - * will be configured. - * @param pFLatency Pointer on the Flash Latency. - * @retval None - */ -void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency) -{ - /* Set all possible values for the Clock type parameter --------------------*/ - RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; - - /* Get the SYSCLK configuration --------------------------------------------*/ - RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW); - - /* Get the HCLK configuration ----------------------------------------------*/ - RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE); - - /* Get the APB1 configuration ----------------------------------------------*/ - RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE1); - - /* Get the APB2 configuration ----------------------------------------------*/ - RCC_ClkInitStruct->APB2CLKDivider = (uint32_t)((RCC->CFGR & RCC_CFGR_PPRE2) >> 3U); - - /* Get the Flash Wait State (Latency) configuration ------------------------*/ - *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY); -} - -/** - * @brief This function handles the RCC CSS interrupt request. - * @note This API should be called under the NMI_Handler(). - * @retval None - */ -void HAL_RCC_NMI_IRQHandler(void) -{ - /* Check RCC CSSF flag */ - if(__HAL_RCC_GET_IT(RCC_IT_CSS)) - { - /* RCC Clock Security System interrupt user callback */ - HAL_RCC_CSSCallback(); - - /* Clear RCC CSS pending bit */ - __HAL_RCC_CLEAR_IT(RCC_IT_CSS); - } -} - -/** - * @brief RCC Clock Security System interrupt callback - * @retval None - */ -__weak void HAL_RCC_CSSCallback(void) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_RCC_CSSCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_RCC_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - +/** + ****************************************************************************** + * @file stm32f4xx_hal_rcc.c + * @author MCD Application Team + * @brief RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Reset and Clock Control (RCC) peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + @verbatim + ============================================================================== + ##### RCC specific features ##### + ============================================================================== + [..] + After reset the device is running from Internal High Speed oscillator + (HSI 16MHz) with Flash 0 wait state, Flash prefetch buffer, D-Cache + and I-Cache are disabled, and all peripherals are off except internal + SRAM, Flash and JTAG. + (+) There is no prescaler on High speed (AHB) and Low speed (APB) busses; + all peripherals mapped on these busses are running at HSI speed. + (+) The clock for all peripherals is switched off, except the SRAM and FLASH. + (+) All GPIOs are in input floating state, except the JTAG pins which + are assigned to be used for debug purpose. + + [..] + Once the device started from reset, the user application has to: + (+) Configure the clock source to be used to drive the System clock + (if the application needs higher frequency/performance) + (+) Configure the System clock frequency and Flash settings + (+) Configure the AHB and APB busses prescalers + (+) Enable the clock for the peripheral(s) to be used + (+) Configure the clock source(s) for peripherals which clocks are not + derived from the System clock (I2S, RTC, ADC, USB OTG FS/SDIO/RNG) + + ##### RCC Limitations ##### + ============================================================================== + [..] + A delay between an RCC peripheral clock enable and the effective peripheral + enabling should be taken into account in order to manage the peripheral read/write + from/to registers. + (+) This delay depends on the peripheral mapping. + (+) If peripheral is mapped on AHB: the delay is 2 AHB clock cycle + after the clock enable bit is set on the hardware register + (+) If peripheral is mapped on APB: the delay is 2 APB clock cycle + after the clock enable bit is set on the hardware register + + [..] + Implemented Workaround: + (+) For AHB & APB peripherals, a dummy read to the peripheral register has been + inserted in each __HAL_RCC_PPP_CLK_ENABLE() macro. + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup RCC RCC + * @brief RCC HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup RCC_Private_Constants + * @{ + */ + +/* Private macro -------------------------------------------------------------*/ +#define __MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define MCO1_GPIO_PORT GPIOA +#define MCO1_PIN GPIO_PIN_8 + +#define __MCO2_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() +#define MCO2_GPIO_PORT GPIOC +#define MCO2_PIN GPIO_PIN_9 +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup RCC_Private_Variables RCC Private Variables + * @{ + */ +/** + * @} + */ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to configure the internal/external oscillators + (HSE, HSI, LSE, LSI, PLL, CSS and MCO) and the System busses clocks (SYSCLK, AHB, APB1 + and APB2). + + [..] Internal/external clock and PLL configuration + (#) HSI (high-speed internal), 16 MHz factory-trimmed RC used directly or through + the PLL as System clock source. + + (#) LSI (low-speed internal), 32 KHz low consumption RC used as IWDG and/or RTC + clock source. + + (#) HSE (high-speed external), 4 to 26 MHz crystal oscillator used directly or + through the PLL as System clock source. Can be used also as RTC clock source. + + (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source. + + (#) PLL (clocked by HSI or HSE), featuring two different output clocks: + (++) The first output is used to generate the high speed system clock (up to 168 MHz) + (++) The second output is used to generate the clock for the USB OTG FS (48 MHz), + the random analog generator (<=48 MHz) and the SDIO (<= 48 MHz). + + (#) CSS (Clock security system), once enable using the macro __HAL_RCC_CSS_ENABLE() + and if a HSE clock failure occurs(HSE used directly or through PLL as System + clock source), the System clocks automatically switched to HSI and an interrupt + is generated if enabled. The interrupt is linked to the Cortex-M4 NMI + (Non-Maskable Interrupt) exception vector. + + (#) MCO1 (microcontroller clock output), used to output HSI, LSE, HSE or PLL + clock (through a configurable prescaler) on PA8 pin. + + (#) MCO2 (microcontroller clock output), used to output HSE, PLL, SYSCLK or PLLI2S + clock (through a configurable prescaler) on PC9 pin. + + [..] System, AHB and APB busses clocks configuration + (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI, + HSE and PLL. + The AHB clock (HCLK) is derived from System clock through configurable + prescaler and used to clock the CPU, memory and peripherals mapped + on AHB bus (DMA, GPIO...). APB1 (PCLK1) and APB2 (PCLK2) clocks are derived + from AHB clock through configurable prescalers and used to clock + the peripherals mapped on these busses. You can use + "HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks. + + (#) For the STM32F405xx/07xx and STM32F415xx/17xx devices, the maximum + frequency of the SYSCLK and HCLK is 168 MHz, PCLK2 84 MHz and PCLK1 42 MHz. + Depending on the device voltage range, the maximum frequency should + be adapted accordingly (refer to the product datasheets for more details). + + (#) For the STM32F42xxx, STM32F43xxx, STM32F446xx, STM32F469xx and STM32F479xx devices, + the maximum frequency of the SYSCLK and HCLK is 180 MHz, PCLK2 90 MHz and PCLK1 45 MHz. + Depending on the device voltage range, the maximum frequency should + be adapted accordingly (refer to the product datasheets for more details). + + (#) For the STM32F401xx, the maximum frequency of the SYSCLK and HCLK is 84 MHz, + PCLK2 84 MHz and PCLK1 42 MHz. + Depending on the device voltage range, the maximum frequency should + be adapted accordingly (refer to the product datasheets for more details). + + (#) For the STM32F41xxx, the maximum frequency of the SYSCLK and HCLK is 100 MHz, + PCLK2 100 MHz and PCLK1 50 MHz. + Depending on the device voltage range, the maximum frequency should + be adapted accordingly (refer to the product datasheets for more details). + +@endverbatim + * @{ + */ + +/** + * @brief Resets the RCC clock configuration to the default reset state. + * @note The default reset state of the clock configuration is given below: + * - HSI ON and used as system clock source + * - HSE and PLL OFF + * - AHB, APB1 and APB2 prescaler set to 1. + * - CSS, MCO1 and MCO2 OFF + * - All interrupts disabled + * @note This function doesn't modify the configuration of the + * - Peripheral clocks + * - LSI, LSE and RTC clocks + * @retval HAL status + */ +__weak HAL_StatusTypeDef HAL_RCC_DeInit(void) +{ + return HAL_OK; +} + +/** + * @brief Initializes the RCC Oscillators according to the specified parameters in the + * RCC_OscInitTypeDef. + * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC Oscillators. + * @note The PLL is not disabled when used as system clock. + * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not + * supported by this API. User should request a transition to LSE Off + * first and then LSE On or LSE Bypass. + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this API. User should request a transition to HSE Off + * first and then HSE On or HSE Bypass. + * @retval HAL status + */ +__weak HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + uint32_t tickstart, pll_config; + + /* Check Null pointer */ + if(RCC_OscInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); + /*------------------------------- HSE Configuration ------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) + { + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); + /* When the HSE is used as system clock or clock source for PLL in these cases HSE will not disabled */ + if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSE) ||\ + ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE))) + { + if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) + { + return HAL_ERROR; + } + } + else + { + /* Set the new HSE configuration ---------------------------------------*/ + __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); + + /* Check the HSE State */ + if((RCC_OscInitStruct->HSEState) != RCC_HSE_OFF) + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSE is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till HSE is bypassed or disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*----------------------------- HSI Configuration --------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); + assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); + + /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */ + if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSI) ||\ + ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI))) + { + /* When HSI is used as system clock it will not disabled */ + if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON)) + { + return HAL_ERROR; + } + /* Otherwise, just the calibration is allowed */ + else + { + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + } + } + else + { + /* Check the HSI State */ + if((RCC_OscInitStruct->HSIState)!= RCC_HSI_OFF) + { + /* Enable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Adjusts the Internal High Speed oscillator (HSI) calibration value. */ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + } + else + { + /* Disable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*------------------------------ LSI Configuration -------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) + { + /* Check the parameters */ + assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); + + /* Check the LSI State */ + if((RCC_OscInitStruct->LSIState)!= RCC_LSI_OFF) + { + /* Enable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + /*------------------------------ LSE Configuration -------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) + { + FlagStatus pwrclkchanged = RESET; + + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); + + /* Update LSE configuration in Backup Domain control register */ + /* Requires to enable write access to Backup Domain of necessary */ + if(__HAL_RCC_PWR_IS_CLK_DISABLED()) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + + if(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + { + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR, PWR_CR_DBP); + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + + while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + { + if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Set the new LSE configuration -----------------------------------------*/ + __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); + /* Check the LSE State */ + if((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Restore clock configuration if changed */ + if(pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } + } + /*-------------------------------- PLL Configuration -----------------------*/ + /* Check the parameters */ + assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); + if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE) + { + /* Check if the PLL is used as system clock or not */ + if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL) + { + if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON) + { + /* Check the parameters */ + assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); + assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM)); + assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN)); + assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP)); + assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ)); + + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure the main PLL clock source, multiplication and division factors. */ + WRITE_REG(RCC->PLLCFGR, (RCC_OscInitStruct->PLL.PLLSource | \ + RCC_OscInitStruct->PLL.PLLM | \ + (RCC_OscInitStruct->PLL.PLLN << RCC_PLLCFGR_PLLN_Pos) | \ + (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U) << RCC_PLLCFGR_PLLP_Pos) | \ + (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos))); + /* Enable the main PLL. */ + __HAL_RCC_PLL_ENABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + else + { + /* Check if there is a request to disable the PLL used as System clock source */ + if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) + { + return HAL_ERROR; + } + else + { + /* Do not return HAL_ERROR if request repeats the current configuration */ + pll_config = RCC->PLLCFGR; +#if defined (RCC_PLLCFGR_PLLR) + if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != (RCC_OscInitStruct->PLL.PLLM) << RCC_PLLCFGR_PLLM_Pos) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN) << RCC_PLLCFGR_PLLN_Pos) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U)) << RCC_PLLCFGR_PLLP_Pos) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos)) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLR) != (RCC_OscInitStruct->PLL.PLLR << RCC_PLLCFGR_PLLR_Pos))) +#else + if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != (RCC_OscInitStruct->PLL.PLLM) << RCC_PLLCFGR_PLLM_Pos) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN) << RCC_PLLCFGR_PLLN_Pos) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U)) << RCC_PLLCFGR_PLLP_Pos) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos))) +#endif + { + return HAL_ERROR; + } + } + } + } + return HAL_OK; +} + +/** + * @brief Initializes the CPU, AHB and APB busses clocks according to the specified + * parameters in the RCC_ClkInitStruct. + * @param RCC_ClkInitStruct pointer to an RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC peripheral. + * @param FLatency FLASH Latency, this parameter depend on device selected + * + * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency + * and updated by HAL_RCC_GetHCLKFreq() function called within this function + * + * @note The HSI is used (enabled by hardware) as system clock source after + * startup from Reset, wake-up from STOP and STANDBY mode, or in case + * of failure of the HSE used directly or indirectly as system clock + * (if the Clock Security System CSS is enabled). + * + * @note A switch from one clock source to another occurs only if the target + * clock source is ready (clock stable after startup delay or PLL locked). + * If a clock source which is not yet ready is selected, the switch will + * occur when the clock source will be ready. + * + * @note Depending on the device voltage range, the software has to set correctly + * HPRE[3:0] bits to ensure that HCLK not exceed the maximum allowed frequency + * (for more details refer to section above "Initialization/de-initialization functions") + * @retval None + */ +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency) +{ + uint32_t tickstart; + + /* Check Null pointer */ + if(RCC_ClkInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType)); + assert_param(IS_FLASH_LATENCY(FLatency)); + + /* To correctly read data from FLASH memory, the number of wait states (LATENCY) + must be correctly programmed according to the frequency of the CPU clock + (HCLK) and the supply voltage of the device. */ + + /* Increasing the number of wait states because of higher CPU frequency */ + if(FLatency > __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if(__HAL_FLASH_GET_LATENCY() != FLatency) + { + return HAL_ERROR; + } + } + + /*-------------------------- HCLK Configuration --------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) + { + /* Set the highest APBx dividers in order to ensure that we do not go through + a non-spec phase whatever we decrease or increase HCLK. */ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_HCLK_DIV16); + } + + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, (RCC_HCLK_DIV16 << 3)); + } + + assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); + } + + /*------------------------- SYSCLK Configuration ---------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) + { + assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource)); + + /* HSE is selected as System Clock Source */ + if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) + { + /* Check the HSE ready flag */ + if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) + { + return HAL_ERROR; + } + } + /* PLL is selected as System Clock Source */ + else if((RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) || + (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLRCLK)) + { + /* Check the PLL ready flag */ + if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) + { + return HAL_ERROR; + } + } + /* HSI is selected as System Clock Source */ + else + { + /* Check the HSI ready flag */ + if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) + { + return HAL_ERROR; + } + } + + __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Decreasing the number of wait states because of lower CPU frequency */ + if(FLatency < __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if(__HAL_FLASH_GET_LATENCY() != FLatency) + { + return HAL_ERROR; + } + } + + /*-------------------------- PCLK1 Configuration ---------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + { + assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_ClkInitStruct->APB1CLKDivider); + } + + /*-------------------------- PCLK2 Configuration ---------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) + { + assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, ((RCC_ClkInitStruct->APB2CLKDivider) << 3U)); + } + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = HAL_RCC_GetSysClockFreq() >> AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> RCC_CFGR_HPRE_Pos]; + + /* Configure the source of time base considering new system clocks settings */ + HAL_InitTick (uwTickPrio); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions + * @brief RCC clocks control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the RCC Clocks + frequencies. + +@endverbatim + * @{ + */ + +/** + * @brief Selects the clock source to output on MCO1 pin(PA8) or on MCO2 pin(PC9). + * @note PA8/PC9 should be configured in alternate function mode. + * @param RCC_MCOx specifies the output direction for the clock source. + * This parameter can be one of the following values: + * @arg RCC_MCO1: Clock source to output on MCO1 pin(PA8). + * @arg RCC_MCO2: Clock source to output on MCO2 pin(PC9). + * @param RCC_MCOSource specifies the clock source to output. + * This parameter can be one of the following values: + * @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source + * @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source + * @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source + * @arg RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source + * @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source + * @arg RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source, available for all STM32F4 devices except STM32F410xx + * @arg RCC_MCO2SOURCE_I2SCLK: I2SCLK clock selected as MCO2 source, available only for STM32F410Rx devices + * @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source + * @arg RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source + * @param RCC_MCODiv specifies the MCOx prescaler. + * This parameter can be one of the following values: + * @arg RCC_MCODIV_1: no division applied to MCOx clock + * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock + * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock + * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock + * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock + * @note For STM32F410Rx devices to output I2SCLK clock on MCO2 you should have + * at last one of the SPI clocks enabled (SPI1, SPI2 or SPI5). + * @retval None + */ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv) +{ + GPIO_InitTypeDef GPIO_InitStruct; + /* Check the parameters */ + assert_param(IS_RCC_MCO(RCC_MCOx)); + assert_param(IS_RCC_MCODIV(RCC_MCODiv)); + /* RCC_MCO1 */ + if(RCC_MCOx == RCC_MCO1) + { + assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource)); + + /* MCO1 Clock Enable */ + __MCO1_CLK_ENABLE(); + + /* Configure the MCO1 pin in alternate function mode */ + GPIO_InitStruct.Pin = MCO1_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF0_MCO; + HAL_GPIO_Init(MCO1_GPIO_PORT, &GPIO_InitStruct); + + /* Mask MCO1 and MCO1PRE[2:0] bits then Select MCO1 clock source and prescaler */ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), (RCC_MCOSource | RCC_MCODiv)); + + /* This RCC MCO1 enable feature is available only on STM32F410xx devices */ +#if defined(RCC_CFGR_MCO1EN) + __HAL_RCC_MCO1_ENABLE(); +#endif /* RCC_CFGR_MCO1EN */ + } +#if defined(RCC_CFGR_MCO2) + else + { + assert_param(IS_RCC_MCO2SOURCE(RCC_MCOSource)); + + /* MCO2 Clock Enable */ + __MCO2_CLK_ENABLE(); + + /* Configure the MCO2 pin in alternate function mode */ + GPIO_InitStruct.Pin = MCO2_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF0_MCO; + HAL_GPIO_Init(MCO2_GPIO_PORT, &GPIO_InitStruct); + + /* Mask MCO2 and MCO2PRE[2:0] bits then Select MCO2 clock source and prescaler */ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), (RCC_MCOSource | (RCC_MCODiv << 3U))); + + /* This RCC MCO2 enable feature is available only on STM32F410Rx devices */ +#if defined(RCC_CFGR_MCO2EN) + __HAL_RCC_MCO2_ENABLE(); +#endif /* RCC_CFGR_MCO2EN */ + } +#endif /* RCC_CFGR_MCO2 */ +} + +/** + * @brief Enables the Clock Security System. + * @note If a failure is detected on the HSE oscillator clock, this oscillator + * is automatically disabled and an interrupt is generated to inform the + * software about the failure (Clock Security System Interrupt, CSSI), + * allowing the MCU to perform rescue operations. The CSSI is linked to + * the Cortex-M4 NMI (Non-Maskable Interrupt) exception vector. + * @retval None + */ +void HAL_RCC_EnableCSS(void) +{ + *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)ENABLE; +} + +/** + * @brief Disables the Clock Security System. + * @retval None + */ +void HAL_RCC_DisableCSS(void) +{ + *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)DISABLE; +} + +/** + * @brief Returns the SYSCLK frequency + * + * @note The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*) + * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**) + * @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(**) + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * @note (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * @note (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value + * 25 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * @note The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @note This function can be used by the user application to compute the + * baudrate for the communication peripherals or configure other parameters. + * + * @note Each time SYSCLK changes, this function must be called to update the + * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * + * @retval SYSCLK frequency + */ +__weak uint32_t HAL_RCC_GetSysClockFreq(void) +{ + uint32_t pllm = 0U, pllvco = 0U, pllp = 0U; + uint32_t sysclockfreq = 0U; + + /* Get SYSCLK source -------------------------------------------------------*/ + switch (RCC->CFGR & RCC_CFGR_SWS) + { + case RCC_CFGR_SWS_HSI: /* HSI used as system clock source */ + { + sysclockfreq = HSI_VALUE; + break; + } + case RCC_CFGR_SWS_HSE: /* HSE used as system clock source */ + { + sysclockfreq = HSE_VALUE; + break; + } + case RCC_CFGR_SWS_PLL: /* PLL used as system clock source */ + { + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN + SYSCLK = PLL_VCO / PLLP */ + pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; + if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI) + { + /* HSE used as PLL clock source */ + pllvco = (uint32_t) ((((uint64_t) HSE_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm); + } + else + { + /* HSI used as PLL clock source */ + pllvco = (uint32_t) ((((uint64_t) HSI_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm); + } + pllp = ((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> RCC_PLLCFGR_PLLP_Pos) + 1U) *2U); + + sysclockfreq = pllvco/pllp; + break; + } + default: + { + sysclockfreq = HSI_VALUE; + break; + } + } + return sysclockfreq; +} + +/** + * @brief Returns the HCLK frequency + * @note Each time HCLK changes, this function must be called to update the + * right HCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency + * and updated within this function + * @retval HCLK frequency + */ +uint32_t HAL_RCC_GetHCLKFreq(void) +{ + return SystemCoreClock; +} + +/** + * @brief Returns the PCLK1 frequency + * @note Each time PCLK1 changes, this function must be called to update the + * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK1 frequency + */ +uint32_t HAL_RCC_GetPCLK1Freq(void) +{ + /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE1)>> RCC_CFGR_PPRE1_Pos]); +} + +/** + * @brief Returns the PCLK2 frequency + * @note Each time PCLK2 changes, this function must be called to update the + * right PCLK2 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK2 frequency + */ +uint32_t HAL_RCC_GetPCLK2Freq(void) +{ + /* Get HCLK source and Compute PCLK2 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq()>> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE2)>> RCC_CFGR_PPRE2_Pos]); +} + +/** + * @brief Configures the RCC_OscInitStruct according to the internal + * RCC configuration registers. + * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that + * will be configured. + * @retval None + */ +__weak void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + /* Set all possible values for the Oscillator type parameter ---------------*/ + RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI; + + /* Get the HSE configuration -----------------------------------------------*/ + if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP) + { + RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS; + } + else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON) + { + RCC_OscInitStruct->HSEState = RCC_HSE_ON; + } + else + { + RCC_OscInitStruct->HSEState = RCC_HSE_OFF; + } + + /* Get the HSI configuration -----------------------------------------------*/ + if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION) + { + RCC_OscInitStruct->HSIState = RCC_HSI_ON; + } + else + { + RCC_OscInitStruct->HSIState = RCC_HSI_OFF; + } + + RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos); + + /* Get the LSE configuration -----------------------------------------------*/ + if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP) + { + RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS; + } + else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON) + { + RCC_OscInitStruct->LSEState = RCC_LSE_ON; + } + else + { + RCC_OscInitStruct->LSEState = RCC_LSE_OFF; + } + + /* Get the LSI configuration -----------------------------------------------*/ + if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION) + { + RCC_OscInitStruct->LSIState = RCC_LSI_ON; + } + else + { + RCC_OscInitStruct->LSIState = RCC_LSI_OFF; + } + + /* Get the PLL configuration -----------------------------------------------*/ + if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON) + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON; + } + else + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF; + } + RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC); + RCC_OscInitStruct->PLL.PLLM = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM); + RCC_OscInitStruct->PLL.PLLN = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos); + RCC_OscInitStruct->PLL.PLLP = (uint32_t)((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) + RCC_PLLCFGR_PLLP_0) << 1U) >> RCC_PLLCFGR_PLLP_Pos); + RCC_OscInitStruct->PLL.PLLQ = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos); +} + +/** + * @brief Configures the RCC_ClkInitStruct according to the internal + * RCC configuration registers. + * @param RCC_ClkInitStruct pointer to an RCC_ClkInitTypeDef structure that + * will be configured. + * @param pFLatency Pointer on the Flash Latency. + * @retval None + */ +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency) +{ + /* Set all possible values for the Clock type parameter --------------------*/ + RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; + + /* Get the SYSCLK configuration --------------------------------------------*/ + RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW); + + /* Get the HCLK configuration ----------------------------------------------*/ + RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE); + + /* Get the APB1 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE1); + + /* Get the APB2 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB2CLKDivider = (uint32_t)((RCC->CFGR & RCC_CFGR_PPRE2) >> 3U); + + /* Get the Flash Wait State (Latency) configuration ------------------------*/ + *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY); +} + +/** + * @brief This function handles the RCC CSS interrupt request. + * @note This API should be called under the NMI_Handler(). + * @retval None + */ +void HAL_RCC_NMI_IRQHandler(void) +{ + /* Check RCC CSSF flag */ + if(__HAL_RCC_GET_IT(RCC_IT_CSS)) + { + /* RCC Clock Security System interrupt user callback */ + HAL_RCC_CSSCallback(); + + /* Clear RCC CSS pending bit */ + __HAL_RCC_CLEAR_IT(RCC_IT_CSS); + } +} + +/** + * @brief RCC Clock Security System interrupt callback + * @retval None + */ +__weak void HAL_RCC_CSSCallback(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_RCC_CSSCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/stm32f4xx_hal_rcc.h b/libs/hal/stm32f4xx_hal_rcc.h similarity index 98% rename from Drivers/stm32f4xx_hal_rcc.h rename to libs/hal/stm32f4xx_hal_rcc.h index 908432d..dcf5814 100644 --- a/Drivers/stm32f4xx_hal_rcc.h +++ b/libs/hal/stm32f4xx_hal_rcc.h @@ -1,1459 +1,1459 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_rcc.h - * @author MCD Application Team - * @brief Header file of RCC HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_RCC_H -#define __STM32F4xx_HAL_RCC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/* Include RCC HAL Extended module */ -/* (include on top of file since RCC structures are defined in extended file) */ -#include "stm32f4xx_hal_rcc_ex.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup RCC - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup RCC_Exported_Types RCC Exported Types - * @{ - */ - -/** - * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition - */ -typedef struct -{ - uint32_t OscillatorType; /*!< The oscillators to be configured. - This parameter can be a value of @ref RCC_Oscillator_Type */ - - uint32_t HSEState; /*!< The new state of the HSE. - This parameter can be a value of @ref RCC_HSE_Config */ - - uint32_t LSEState; /*!< The new state of the LSE. - This parameter can be a value of @ref RCC_LSE_Config */ - - uint32_t HSIState; /*!< The new state of the HSI. - This parameter can be a value of @ref RCC_HSI_Config */ - - uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT). - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */ - - uint32_t LSIState; /*!< The new state of the LSI. - This parameter can be a value of @ref RCC_LSI_Config */ - - RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */ -}RCC_OscInitTypeDef; - -/** - * @brief RCC System, AHB and APB busses clock configuration structure definition - */ -typedef struct -{ - uint32_t ClockType; /*!< The clock to be configured. - This parameter can be a value of @ref RCC_System_Clock_Type */ - - uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock. - This parameter can be a value of @ref RCC_System_Clock_Source */ - - uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). - This parameter can be a value of @ref RCC_AHB_Clock_Source */ - - uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). - This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */ - - uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK). - This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */ - -}RCC_ClkInitTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup RCC_Exported_Constants RCC Exported Constants - * @{ - */ - -/** @defgroup RCC_Oscillator_Type Oscillator Type - * @{ - */ -#define RCC_OSCILLATORTYPE_NONE 0x00000000U -#define RCC_OSCILLATORTYPE_HSE 0x00000001U -#define RCC_OSCILLATORTYPE_HSI 0x00000002U -#define RCC_OSCILLATORTYPE_LSE 0x00000004U -#define RCC_OSCILLATORTYPE_LSI 0x00000008U -/** - * @} - */ - -/** @defgroup RCC_HSE_Config HSE Config - * @{ - */ -#define RCC_HSE_OFF 0x00000000U -#define RCC_HSE_ON RCC_CR_HSEON -#define RCC_HSE_BYPASS ((uint32_t)(RCC_CR_HSEBYP | RCC_CR_HSEON)) -/** - * @} - */ - -/** @defgroup RCC_LSE_Config LSE Config - * @{ - */ -#define RCC_LSE_OFF 0x00000000U -#define RCC_LSE_ON RCC_BDCR_LSEON -#define RCC_LSE_BYPASS ((uint32_t)(RCC_BDCR_LSEBYP | RCC_BDCR_LSEON)) -/** - * @} - */ - -/** @defgroup RCC_HSI_Config HSI Config - * @{ - */ -#define RCC_HSI_OFF ((uint8_t)0x00) -#define RCC_HSI_ON ((uint8_t)0x01) - -#define RCC_HSICALIBRATION_DEFAULT 0x10U /* Default HSI calibration trimming value */ -/** - * @} - */ - -/** @defgroup RCC_LSI_Config LSI Config - * @{ - */ -#define RCC_LSI_OFF ((uint8_t)0x00) -#define RCC_LSI_ON ((uint8_t)0x01) -/** - * @} - */ - -/** @defgroup RCC_PLL_Config PLL Config - * @{ - */ -#define RCC_PLL_NONE ((uint8_t)0x00) -#define RCC_PLL_OFF ((uint8_t)0x01) -#define RCC_PLL_ON ((uint8_t)0x02) -/** - * @} - */ - -/** @defgroup RCC_PLLP_Clock_Divider PLLP Clock Divider - * @{ - */ -#define RCC_PLLP_DIV2 0x00000002U -#define RCC_PLLP_DIV4 0x00000004U -#define RCC_PLLP_DIV6 0x00000006U -#define RCC_PLLP_DIV8 0x00000008U -/** - * @} - */ - -/** @defgroup RCC_PLL_Clock_Source PLL Clock Source - * @{ - */ -#define RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI -#define RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE -/** - * @} - */ - -/** @defgroup RCC_System_Clock_Type System Clock Type - * @{ - */ -#define RCC_CLOCKTYPE_SYSCLK 0x00000001U -#define RCC_CLOCKTYPE_HCLK 0x00000002U -#define RCC_CLOCKTYPE_PCLK1 0x00000004U -#define RCC_CLOCKTYPE_PCLK2 0x00000008U -/** - * @} - */ - -/** @defgroup RCC_System_Clock_Source System Clock Source - * @note The RCC_SYSCLKSOURCE_PLLRCLK parameter is available only for - * STM32F446xx devices. - * @{ - */ -#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI -#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE -#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL -#define RCC_SYSCLKSOURCE_PLLRCLK ((uint32_t)(RCC_CFGR_SW_0 | RCC_CFGR_SW_1)) -/** - * @} - */ - -/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status - * @note The RCC_SYSCLKSOURCE_STATUS_PLLRCLK parameter is available only for - * STM32F446xx devices. - * @{ - */ -#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ -#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ -#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */ -#define RCC_SYSCLKSOURCE_STATUS_PLLRCLK ((uint32_t)(RCC_CFGR_SWS_0 | RCC_CFGR_SWS_1)) /*!< PLLR used as system clock */ -/** - * @} - */ - -/** @defgroup RCC_AHB_Clock_Source AHB Clock Source - * @{ - */ -#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1 -#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2 -#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4 -#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8 -#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16 -#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64 -#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128 -#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256 -#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512 -/** - * @} - */ - -/** @defgroup RCC_APB1_APB2_Clock_Source APB1/APB2 Clock Source - * @{ - */ -#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1 -#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2 -#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4 -#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8 -#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16 -/** - * @} - */ - -/** @defgroup RCC_RTC_Clock_Source RTC Clock Source - * @{ - */ -#define RCC_RTCCLKSOURCE_NO_CLK 0x00000000U -#define RCC_RTCCLKSOURCE_LSE 0x00000100U -#define RCC_RTCCLKSOURCE_LSI 0x00000200U -#define RCC_RTCCLKSOURCE_HSE_DIVX 0x00000300U -#define RCC_RTCCLKSOURCE_HSE_DIV2 0x00020300U -#define RCC_RTCCLKSOURCE_HSE_DIV3 0x00030300U -#define RCC_RTCCLKSOURCE_HSE_DIV4 0x00040300U -#define RCC_RTCCLKSOURCE_HSE_DIV5 0x00050300U -#define RCC_RTCCLKSOURCE_HSE_DIV6 0x00060300U -#define RCC_RTCCLKSOURCE_HSE_DIV7 0x00070300U -#define RCC_RTCCLKSOURCE_HSE_DIV8 0x00080300U -#define RCC_RTCCLKSOURCE_HSE_DIV9 0x00090300U -#define RCC_RTCCLKSOURCE_HSE_DIV10 0x000A0300U -#define RCC_RTCCLKSOURCE_HSE_DIV11 0x000B0300U -#define RCC_RTCCLKSOURCE_HSE_DIV12 0x000C0300U -#define RCC_RTCCLKSOURCE_HSE_DIV13 0x000D0300U -#define RCC_RTCCLKSOURCE_HSE_DIV14 0x000E0300U -#define RCC_RTCCLKSOURCE_HSE_DIV15 0x000F0300U -#define RCC_RTCCLKSOURCE_HSE_DIV16 0x00100300U -#define RCC_RTCCLKSOURCE_HSE_DIV17 0x00110300U -#define RCC_RTCCLKSOURCE_HSE_DIV18 0x00120300U -#define RCC_RTCCLKSOURCE_HSE_DIV19 0x00130300U -#define RCC_RTCCLKSOURCE_HSE_DIV20 0x00140300U -#define RCC_RTCCLKSOURCE_HSE_DIV21 0x00150300U -#define RCC_RTCCLKSOURCE_HSE_DIV22 0x00160300U -#define RCC_RTCCLKSOURCE_HSE_DIV23 0x00170300U -#define RCC_RTCCLKSOURCE_HSE_DIV24 0x00180300U -#define RCC_RTCCLKSOURCE_HSE_DIV25 0x00190300U -#define RCC_RTCCLKSOURCE_HSE_DIV26 0x001A0300U -#define RCC_RTCCLKSOURCE_HSE_DIV27 0x001B0300U -#define RCC_RTCCLKSOURCE_HSE_DIV28 0x001C0300U -#define RCC_RTCCLKSOURCE_HSE_DIV29 0x001D0300U -#define RCC_RTCCLKSOURCE_HSE_DIV30 0x001E0300U -#define RCC_RTCCLKSOURCE_HSE_DIV31 0x001F0300U -/** - * @} - */ - -/** @defgroup RCC_MCO_Index MCO Index - * @{ - */ -#define RCC_MCO1 0x00000000U -#define RCC_MCO2 0x00000001U -/** - * @} - */ - -/** @defgroup RCC_MCO1_Clock_Source MCO1 Clock Source - * @{ - */ -#define RCC_MCO1SOURCE_HSI 0x00000000U -#define RCC_MCO1SOURCE_LSE RCC_CFGR_MCO1_0 -#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCO1_1 -#define RCC_MCO1SOURCE_PLLCLK RCC_CFGR_MCO1 -/** - * @} - */ - -/** @defgroup RCC_MCOx_Clock_Prescaler MCOx Clock Prescaler - * @{ - */ -#define RCC_MCODIV_1 0x00000000U -#define RCC_MCODIV_2 RCC_CFGR_MCO1PRE_2 -#define RCC_MCODIV_3 ((uint32_t)RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_2) -#define RCC_MCODIV_4 ((uint32_t)RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2) -#define RCC_MCODIV_5 RCC_CFGR_MCO1PRE -/** - * @} - */ - -/** @defgroup RCC_Interrupt Interrupts - * @{ - */ -#define RCC_IT_LSIRDY ((uint8_t)0x01) -#define RCC_IT_LSERDY ((uint8_t)0x02) -#define RCC_IT_HSIRDY ((uint8_t)0x04) -#define RCC_IT_HSERDY ((uint8_t)0x08) -#define RCC_IT_PLLRDY ((uint8_t)0x10) -#define RCC_IT_PLLI2SRDY ((uint8_t)0x20) -#define RCC_IT_CSS ((uint8_t)0x80) -/** - * @} - */ - -/** @defgroup RCC_Flag Flags - * Elements values convention: 0XXYYYYYb - * - YYYYY : Flag position in the register - * - 0XX : Register index - * - 01: CR register - * - 10: BDCR register - * - 11: CSR register - * @{ - */ -/* Flags in the CR register */ -#define RCC_FLAG_HSIRDY ((uint8_t)0x21) -#define RCC_FLAG_HSERDY ((uint8_t)0x31) -#define RCC_FLAG_PLLRDY ((uint8_t)0x39) -#define RCC_FLAG_PLLI2SRDY ((uint8_t)0x3B) - -/* Flags in the BDCR register */ -#define RCC_FLAG_LSERDY ((uint8_t)0x41) - -/* Flags in the CSR register */ -#define RCC_FLAG_LSIRDY ((uint8_t)0x61) -#define RCC_FLAG_BORRST ((uint8_t)0x79) -#define RCC_FLAG_PINRST ((uint8_t)0x7A) -#define RCC_FLAG_PORRST ((uint8_t)0x7B) -#define RCC_FLAG_SFTRST ((uint8_t)0x7C) -#define RCC_FLAG_IWDGRST ((uint8_t)0x7D) -#define RCC_FLAG_WWDGRST ((uint8_t)0x7E) -#define RCC_FLAG_LPWRRST ((uint8_t)0x7F) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup RCC_Exported_Macros RCC Exported Macros - * @{ - */ - -/** @defgroup RCC_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOH_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DMA1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DMA2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOAEN)) -#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOBEN)) -#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOCEN)) -#define __HAL_RCC_GPIOH_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOHEN)) -#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA1EN)) -#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2EN)) -/** - * @} - */ - -/** @defgroup RCC_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOAEN)) != RESET) -#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOBEN)) != RESET) -#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOCEN)) != RESET) -#define __HAL_RCC_GPIOH_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOHEN)) != RESET) -#define __HAL_RCC_DMA1_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA1EN)) != RESET) -#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA2EN)) != RESET) - -#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOAEN)) == RESET) -#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOBEN)) == RESET) -#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOCEN)) == RESET) -#define __HAL_RCC_GPIOH_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOHEN)) == RESET) -#define __HAL_RCC_DMA1_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA1EN)) == RESET) -#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA2EN)) == RESET) -/** - * @} - */ - -/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable - * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_WWDG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USART2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_I2C1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_I2C2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_PWR_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN)) -#define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN)) -#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN)) -#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN)) -#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN)) -#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN)) -#define __HAL_RCC_PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN)) -/** - * @} - */ - -/** @defgroup RCC_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) != RESET) -#define __HAL_RCC_WWDG_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) != RESET) -#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET) -#define __HAL_RCC_USART2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) != RESET) -#define __HAL_RCC_I2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) != RESET) -#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET) -#define __HAL_RCC_PWR_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) != RESET) - -#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) == RESET) -#define __HAL_RCC_WWDG_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) == RESET) -#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET) -#define __HAL_RCC_USART2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) == RESET) -#define __HAL_RCC_I2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) == RESET) -#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET) -#define __HAL_RCC_PWR_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) == RESET) -/** - * @} - */ - -/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USART1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USART6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ADC1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM9_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM11_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN)) -#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN)) -#define __HAL_RCC_USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN)) -#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN)) -#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN)) -#define __HAL_RCC_SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN)) -#define __HAL_RCC_TIM9_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM9EN)) -#define __HAL_RCC_TIM11_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM11EN)) -/** - * @} - */ - -/** @defgroup RCC_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) != RESET) -#define __HAL_RCC_USART1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) != RESET) -#define __HAL_RCC_USART6_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) != RESET) -#define __HAL_RCC_ADC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) != RESET) -#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET) -#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) != RESET) -#define __HAL_RCC_TIM9_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) != RESET) -#define __HAL_RCC_TIM11_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) != RESET) - -#define __HAL_RCC_TIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) == RESET) -#define __HAL_RCC_USART1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) == RESET) -#define __HAL_RCC_USART6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) == RESET) -#define __HAL_RCC_ADC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) == RESET) -#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET) -#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) == RESET) -#define __HAL_RCC_TIM9_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) == RESET) -#define __HAL_RCC_TIM11_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) == RESET) -/** - * @} - */ - -/** @defgroup RCC_AHB1_Force_Release_Reset AHB1 Force Release Reset - * @brief Force or release AHB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOARST)) -#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOBRST)) -#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOCRST)) -#define __HAL_RCC_GPIOH_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOHRST)) -#define __HAL_RCC_DMA1_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA1RST)) -#define __HAL_RCC_DMA2_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2RST)) - -#define __HAL_RCC_AHB1_RELEASE_RESET() (RCC->AHB1RSTR = 0x00U) -#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOARST)) -#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOBRST)) -#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOCRST)) -#define __HAL_RCC_GPIOH_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOHRST)) -#define __HAL_RCC_DMA1_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA1RST)) -#define __HAL_RCC_DMA2_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2RST)) -/** - * @} - */ - -/** @defgroup RCC_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST)) -#define __HAL_RCC_WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST)) -#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST)) -#define __HAL_RCC_USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST)) -#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST)) -#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST)) -#define __HAL_RCC_PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST)) - -#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00U) -#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST)) -#define __HAL_RCC_WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST)) -#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST)) -#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST)) -#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST)) -#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST)) -#define __HAL_RCC_PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST)) -/** - * @} - */ - -/** @defgroup RCC_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST)) -#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST)) -#define __HAL_RCC_USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST)) -#define __HAL_RCC_ADC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADCRST)) -#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST)) -#define __HAL_RCC_SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST)) -#define __HAL_RCC_TIM9_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM9RST)) -#define __HAL_RCC_TIM11_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM11RST)) - -#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00U) -#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST)) -#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST)) -#define __HAL_RCC_USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST)) -#define __HAL_RCC_ADC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADCRST)) -#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST)) -#define __HAL_RCC_SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST)) -#define __HAL_RCC_TIM9_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM9RST)) -#define __HAL_RCC_TIM11_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM11RST)) -/** - * @} - */ - -/** @defgroup RCC_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOALPEN)) -#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOBLPEN)) -#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOCLPEN)) -#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOHLPEN)) -#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA1LPEN)) -#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2LPEN)) - -#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOALPEN)) -#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOBLPEN)) -#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOCLPEN)) -#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOHLPEN)) -#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA1LPEN)) -#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2LPEN)) -/** - * @} - */ - -/** @defgroup RCC_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM5LPEN)) -#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_WWDGLPEN)) -#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI2LPEN)) -#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART2LPEN)) -#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C1LPEN)) -#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C2LPEN)) -#define __HAL_RCC_PWR_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_PWRLPEN)) - -#define __HAL_RCC_TIM5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM5LPEN)) -#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_WWDGLPEN)) -#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI2LPEN)) -#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART2LPEN)) -#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C1LPEN)) -#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C2LPEN)) -#define __HAL_RCC_PWR_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_PWRLPEN)) -/** - * @} - */ - -/** @defgroup RCC_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM1LPEN)) -#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART1LPEN)) -#define __HAL_RCC_USART6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART6LPEN)) -#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC1LPEN)) -#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI1LPEN)) -#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SYSCFGLPEN)) -#define __HAL_RCC_TIM9_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM9LPEN)) -#define __HAL_RCC_TIM11_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM11LPEN)) - -#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM1LPEN)) -#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART1LPEN)) -#define __HAL_RCC_USART6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART6LPEN)) -#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC1LPEN)) -#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI1LPEN)) -#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SYSCFGLPEN)) -#define __HAL_RCC_TIM9_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM9LPEN)) -#define __HAL_RCC_TIM11_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM11LPEN)) -/** - * @} - */ - -/** @defgroup RCC_HSI_Configuration HSI Configuration - * @{ - */ - -/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI). - * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. - * It is used (enabled by hardware) as system clock source after startup - * from Reset, wake-up from STOP and STANDBY mode, or in case of failure - * of the HSE used directly or indirectly as system clock (if the Clock - * Security System CSS is enabled). - * @note HSI can not be stopped if it is used as system clock source. In this case, - * you have to select another source of the system clock then stop the HSI. - * @note After enabling the HSI, the application software should wait on HSIRDY - * flag to be set indicating that HSI clock is stable and can be used as - * system clock source. - * This parameter can be: ENABLE or DISABLE. - * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator - * clock cycles. - */ -#define __HAL_RCC_HSI_ENABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = ENABLE) -#define __HAL_RCC_HSI_DISABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = DISABLE) - -/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value. - * @note The calibration is used to compensate for the variations in voltage - * and temperature that influence the frequency of the internal HSI RC. - * @param __HSICalibrationValue__ specifies the calibration trimming value. - * (default is RCC_HSICALIBRATION_DEFAULT). - * This parameter must be a number between 0 and 0x1F. - */ -#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) (MODIFY_REG(RCC->CR,\ - RCC_CR_HSITRIM, (uint32_t)(__HSICalibrationValue__) << RCC_CR_HSITRIM_Pos)) -/** - * @} - */ - -/** @defgroup RCC_LSI_Configuration LSI Configuration - * @{ - */ - -/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI). - * @note After enabling the LSI, the application software should wait on - * LSIRDY flag to be set indicating that LSI clock is stable and can - * be used to clock the IWDG and/or the RTC. - * @note LSI can not be disabled if the IWDG is running. - * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator - * clock cycles. - */ -#define __HAL_RCC_LSI_ENABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = ENABLE) -#define __HAL_RCC_LSI_DISABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = DISABLE) -/** - * @} - */ - -/** @defgroup RCC_HSE_Configuration HSE Configuration - * @{ - */ - -/** - * @brief Macro to configure the External High Speed oscillator (HSE). - * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not supported by this macro. - * User should request a transition to HSE Off first and then HSE On or HSE Bypass. - * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application - * software should wait on HSERDY flag to be set indicating that HSE clock - * is stable and can be used to clock the PLL and/or system clock. - * @note HSE state can not be changed if it is used directly or through the - * PLL as system clock. In this case, you have to select another source - * of the system clock then change the HSE state (ex. disable it). - * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. - * @note This function reset the CSSON bit, so if the clock security system(CSS) - * was previously enabled you have to enable it again after calling this - * function. - * @param __STATE__ specifies the new state of the HSE. - * This parameter can be one of the following values: - * @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after - * 6 HSE oscillator clock cycles. - * @arg RCC_HSE_ON: turn ON the HSE oscillator. - * @arg RCC_HSE_BYPASS: HSE oscillator bypassed with external clock. - */ -#define __HAL_RCC_HSE_CONFIG(__STATE__) \ - do { \ - if ((__STATE__) == RCC_HSE_ON) \ - { \ - SET_BIT(RCC->CR, RCC_CR_HSEON); \ - } \ - else if ((__STATE__) == RCC_HSE_BYPASS) \ - { \ - SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ - SET_BIT(RCC->CR, RCC_CR_HSEON); \ - } \ - else \ - { \ - CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ - CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ - } \ - } while(0U) -/** - * @} - */ - -/** @defgroup RCC_LSE_Configuration LSE Configuration - * @{ - */ - -/** - * @brief Macro to configure the External Low Speed oscillator (LSE). - * @note Transition LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro. - * User should request a transition to LSE Off first and then LSE On or LSE Bypass. - * @note As the LSE is in the Backup domain and write access is denied to - * this domain after reset, you have to enable write access using - * HAL_PWR_EnableBkUpAccess() function before to configure the LSE - * (to be done once after reset). - * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application - * software should wait on LSERDY flag to be set indicating that LSE clock - * is stable and can be used to clock the RTC. - * @param __STATE__ specifies the new state of the LSE. - * This parameter can be one of the following values: - * @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after - * 6 LSE oscillator clock cycles. - * @arg RCC_LSE_ON: turn ON the LSE oscillator. - * @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock. - */ -#define __HAL_RCC_LSE_CONFIG(__STATE__) \ - do { \ - if((__STATE__) == RCC_LSE_ON) \ - { \ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ - } \ - else if((__STATE__) == RCC_LSE_BYPASS) \ - { \ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ - } \ - else \ - { \ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ - } \ - } while(0U) -/** - * @} - */ - -/** @defgroup RCC_Internal_RTC_Clock_Configuration RTC Clock Configuration - * @{ - */ - -/** @brief Macros to enable or disable the RTC clock. - * @note These macros must be used only after the RTC clock source was selected. - */ -#define __HAL_RCC_RTC_ENABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = ENABLE) -#define __HAL_RCC_RTC_DISABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = DISABLE) - -/** @brief Macros to configure the RTC clock (RTCCLK). - * @note As the RTC clock configuration bits are in the Backup domain and write - * access is denied to this domain after reset, you have to enable write - * access using the Power Backup Access macro before to configure - * the RTC clock source (to be done once after reset). - * @note Once the RTC clock is configured it can't be changed unless the - * Backup domain is reset using __HAL_RCC_BackupReset_RELEASE() macro, or by - * a Power On Reset (POR). - * @param __RTCCLKSource__ specifies the RTC clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_RTCCLKSOURCE_NO_CLK : No clock selected as RTC clock. - * @arg @ref RCC_RTCCLKSOURCE_LSE : LSE selected as RTC clock. - * @arg @ref RCC_RTCCLKSOURCE_LSI : LSI selected as RTC clock. - * @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX HSE divided by X selected as RTC clock (X can be retrieved thanks to @ref __HAL_RCC_GET_RTC_HSE_PRESCALER() - * @note If the LSE or LSI is used as RTC clock source, the RTC continues to - * work in STOP and STANDBY modes, and can be used as wake-up source. - * However, when the HSE clock is used as RTC clock source, the RTC - * cannot be used in STOP and STANDBY modes. - * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as - * RTC clock source). - */ -#define __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__) (((__RTCCLKSource__) & RCC_BDCR_RTCSEL) == RCC_BDCR_RTCSEL) ? \ - MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, ((__RTCCLKSource__) & 0xFFFFCFFU)) : CLEAR_BIT(RCC->CFGR, RCC_CFGR_RTCPRE) - -#define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) do { __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__); \ - RCC->BDCR |= ((__RTCCLKSource__) & 0x00000FFFU); \ - } while(0U) - -/** @brief Macro to get the RTC clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock - * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock - * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock - * @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX HSE divided by X selected as RTC clock (X can be retrieved thanks to @ref __HAL_RCC_GET_RTC_HSE_PRESCALER() - */ -#define __HAL_RCC_GET_RTC_SOURCE() (READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)) - -/** - * @brief Get the RTC and HSE clock divider (RTCPRE). - * @retval Returned value can be one of the following values: - * @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX HSE divided by X selected as RTC clock (X can be retrieved thanks to @ref __HAL_RCC_GET_RTC_HSE_PRESCALER() - */ -#define __HAL_RCC_GET_RTC_HSE_PRESCALER() (READ_BIT(RCC->CFGR, RCC_CFGR_RTCPRE) | RCC_BDCR_RTCSEL) - -/** @brief Macros to force or release the Backup domain reset. - * @note This function resets the RTC peripheral (including the backup registers) - * and the RTC clock source selection in RCC_CSR register. - * @note The BKPSRAM is not affected by this reset. - */ -#define __HAL_RCC_BACKUPRESET_FORCE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = ENABLE) -#define __HAL_RCC_BACKUPRESET_RELEASE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = DISABLE) -/** - * @} - */ - -/** @defgroup RCC_PLL_Configuration PLL Configuration - * @{ - */ - -/** @brief Macros to enable or disable the main PLL. - * @note After enabling the main PLL, the application software should wait on - * PLLRDY flag to be set indicating that PLL clock is stable and can - * be used as system clock source. - * @note The main PLL can not be disabled if it is used as system clock source - * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes. - */ -#define __HAL_RCC_PLL_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = ENABLE) -#define __HAL_RCC_PLL_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = DISABLE) - -/** @brief Macro to configure the PLL clock source. - * @note This function must be used only when the main PLL is disabled. - * @param __PLLSOURCE__ specifies the PLL entry clock source. - * This parameter can be one of the following values: - * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry - * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry - * - */ -#define __HAL_RCC_PLL_PLLSOURCE_CONFIG(__PLLSOURCE__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (__PLLSOURCE__)) - -/** @brief Macro to configure the PLL multiplication factor. - * @note This function must be used only when the main PLL is disabled. - * @param __PLLM__ specifies the division factor for PLL VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note You have to set the PLLM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 2 MHz to limit PLL jitter. - * - */ -#define __HAL_RCC_PLL_PLLM_CONFIG(__PLLM__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, (__PLLM__)) -/** - * @} - */ - -/** @defgroup RCC_Get_Clock_source Get Clock source - * @{ - */ -/** - * @brief Macro to configure the system clock source. - * @param __RCC_SYSCLKSOURCE__ specifies the system clock source. - * This parameter can be one of the following values: - * - RCC_SYSCLKSOURCE_HSI: HSI oscillator is used as system clock source. - * - RCC_SYSCLKSOURCE_HSE: HSE oscillator is used as system clock source. - * - RCC_SYSCLKSOURCE_PLLCLK: PLL output is used as system clock source. - * - RCC_SYSCLKSOURCE_PLLRCLK: PLLR output is used as system clock source. This - * parameter is available only for STM32F446xx devices. - */ -#define __HAL_RCC_SYSCLK_CONFIG(__RCC_SYSCLKSOURCE__) MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__RCC_SYSCLKSOURCE__)) - -/** @brief Macro to get the clock source used as system clock. - * @retval The clock source used as system clock. The returned value can be one - * of the following: - * - RCC_SYSCLKSOURCE_STATUS_HSI: HSI used as system clock. - * - RCC_SYSCLKSOURCE_STATUS_HSE: HSE used as system clock. - * - RCC_SYSCLKSOURCE_STATUS_PLLCLK: PLL used as system clock. - * - RCC_SYSCLKSOURCE_STATUS_PLLRCLK: PLLR used as system clock. This parameter - * is available only for STM32F446xx devices. - */ -#define __HAL_RCC_GET_SYSCLK_SOURCE() (RCC->CFGR & RCC_CFGR_SWS) - -/** @brief Macro to get the oscillator used as PLL clock source. - * @retval The oscillator used as PLL clock source. The returned value can be one - * of the following: - * - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source. - * - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source. - */ -#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC)) -/** - * @} - */ - -/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config - * @{ - */ - -/** @brief Macro to configure the MCO1 clock. - * @param __MCOCLKSOURCE__ specifies the MCO clock source. - * This parameter can be one of the following values: - * @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source - * @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source - * @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source - * @arg RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source - * @param __MCODIV__ specifies the MCO clock prescaler. - * This parameter can be one of the following values: - * @arg RCC_MCODIV_1: no division applied to MCOx clock - * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock - * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock - * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock - * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock - */ -#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ - MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), ((__MCOCLKSOURCE__) | (__MCODIV__))) - -/** @brief Macro to configure the MCO2 clock. - * @param __MCOCLKSOURCE__ specifies the MCO clock source. - * This parameter can be one of the following values: - * @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source - * @arg RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source, available for all STM32F4 devices except STM32F410xx - * @arg RCC_MCO2SOURCE_I2SCLK: I2SCLK clock selected as MCO2 source, available only for STM32F410Rx devices - * @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source - * @arg RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source - * @param __MCODIV__ specifies the MCO clock prescaler. - * This parameter can be one of the following values: - * @arg RCC_MCODIV_1: no division applied to MCOx clock - * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock - * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock - * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock - * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock - * @note For STM32F410Rx devices, to output I2SCLK clock on MCO2, you should have - * at least one of the SPI clocks enabled (SPI1, SPI2 or SPI5). - */ -#define __HAL_RCC_MCO2_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ - MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | ((__MCODIV__) << 3U))); -/** - * @} - */ - -/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management - * @brief macros to manage the specified RCC Flags and interrupts. - * @{ - */ - -/** @brief Enable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to enable - * the selected interrupts). - * @param __INTERRUPT__ specifies the RCC interrupt sources to be enabled. - * This parameter can be any combination of the following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt. - * @arg RCC_IT_LSERDY: LSE ready interrupt. - * @arg RCC_IT_HSIRDY: HSI ready interrupt. - * @arg RCC_IT_HSERDY: HSE ready interrupt. - * @arg RCC_IT_PLLRDY: Main PLL ready interrupt. - * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt. - */ -#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__)) - -/** @brief Disable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to disable - * the selected interrupts). - * @param __INTERRUPT__ specifies the RCC interrupt sources to be disabled. - * This parameter can be any combination of the following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt. - * @arg RCC_IT_LSERDY: LSE ready interrupt. - * @arg RCC_IT_HSIRDY: HSI ready interrupt. - * @arg RCC_IT_HSERDY: HSE ready interrupt. - * @arg RCC_IT_PLLRDY: Main PLL ready interrupt. - * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt. - */ -#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= (uint8_t)(~(__INTERRUPT__))) - -/** @brief Clear the RCC's interrupt pending bits (Perform Byte access to RCC_CIR[23:16] - * bits to clear the selected interrupt pending bits. - * @param __INTERRUPT__ specifies the interrupt pending bit to clear. - * This parameter can be any combination of the following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt. - * @arg RCC_IT_LSERDY: LSE ready interrupt. - * @arg RCC_IT_HSIRDY: HSI ready interrupt. - * @arg RCC_IT_HSERDY: HSE ready interrupt. - * @arg RCC_IT_PLLRDY: Main PLL ready interrupt. - * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt. - * @arg RCC_IT_CSS: Clock Security System interrupt - */ -#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__)) - -/** @brief Check the RCC's interrupt has occurred or not. - * @param __INTERRUPT__ specifies the RCC interrupt source to check. - * This parameter can be one of the following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt. - * @arg RCC_IT_LSERDY: LSE ready interrupt. - * @arg RCC_IT_HSIRDY: HSI ready interrupt. - * @arg RCC_IT_HSERDY: HSE ready interrupt. - * @arg RCC_IT_PLLRDY: Main PLL ready interrupt. - * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt. - * @arg RCC_IT_CSS: Clock Security System interrupt - * @retval The new state of __INTERRUPT__ (TRUE or FALSE). - */ -#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__)) - -/** @brief Set RMVF bit to clear the reset flags: RCC_FLAG_PINRST, RCC_FLAG_PORRST, - * RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST and RCC_FLAG_LPWRRST. - */ -#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF) - -/** @brief Check RCC flag is set or not. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready. - * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready. - * @arg RCC_FLAG_PLLRDY: Main PLL clock ready. - * @arg RCC_FLAG_PLLI2SRDY: PLLI2S clock ready. - * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready. - * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready. - * @arg RCC_FLAG_BORRST: POR/PDR or BOR reset. - * @arg RCC_FLAG_PINRST: Pin reset. - * @arg RCC_FLAG_PORRST: POR/PDR reset. - * @arg RCC_FLAG_SFTRST: Software reset. - * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset. - * @arg RCC_FLAG_WWDGRST: Window Watchdog reset. - * @arg RCC_FLAG_LPWRRST: Low Power reset. - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define RCC_FLAG_MASK ((uint8_t)0x1FU) -#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == 1U)? RCC->CR :((((__FLAG__) >> 5U) == 2U) ? RCC->BDCR :((((__FLAG__) >> 5U) == 3U)? RCC->CSR :RCC->CIR))) & (1U << ((__FLAG__) & RCC_FLAG_MASK)))!= 0U)? 1U : 0U) - -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - /** @addtogroup RCC_Exported_Functions - * @{ - */ - -/** @addtogroup RCC_Exported_Functions_Group1 - * @{ - */ -/* Initialization and de-initialization functions ******************************/ -HAL_StatusTypeDef HAL_RCC_DeInit(void); -HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); -HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency); -/** - * @} - */ - -/** @addtogroup RCC_Exported_Functions_Group2 - * @{ - */ -/* Peripheral Control functions ************************************************/ -void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv); -void HAL_RCC_EnableCSS(void); -void HAL_RCC_DisableCSS(void); -uint32_t HAL_RCC_GetSysClockFreq(void); -uint32_t HAL_RCC_GetHCLKFreq(void); -uint32_t HAL_RCC_GetPCLK1Freq(void); -uint32_t HAL_RCC_GetPCLK2Freq(void); -void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); -void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency); - -/* CSS NMI IRQ handler */ -void HAL_RCC_NMI_IRQHandler(void); - -/* User Callbacks in non blocking mode (IT mode) */ -void HAL_RCC_CSSCallback(void); - -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup RCC_Private_Constants RCC Private Constants - * @{ - */ - -/** @defgroup RCC_BitAddress_AliasRegion RCC BitAddress AliasRegion - * @brief RCC registers bit address in the alias region - * @{ - */ -#define RCC_OFFSET (RCC_BASE - PERIPH_BASE) -/* --- CR Register --- */ -/* Alias word address of HSION bit */ -#define RCC_CR_OFFSET (RCC_OFFSET + 0x00U) -#define RCC_HSION_BIT_NUMBER 0x00U -#define RCC_CR_HSION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_HSION_BIT_NUMBER * 4U)) -/* Alias word address of CSSON bit */ -#define RCC_CSSON_BIT_NUMBER 0x13U -#define RCC_CR_CSSON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_CSSON_BIT_NUMBER * 4U)) -/* Alias word address of PLLON bit */ -#define RCC_PLLON_BIT_NUMBER 0x18U -#define RCC_CR_PLLON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_PLLON_BIT_NUMBER * 4U)) - -/* --- BDCR Register --- */ -/* Alias word address of RTCEN bit */ -#define RCC_BDCR_OFFSET (RCC_OFFSET + 0x70U) -#define RCC_RTCEN_BIT_NUMBER 0x0FU -#define RCC_BDCR_RTCEN_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32U) + (RCC_RTCEN_BIT_NUMBER * 4U)) -/* Alias word address of BDRST bit */ -#define RCC_BDRST_BIT_NUMBER 0x10U -#define RCC_BDCR_BDRST_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32U) + (RCC_BDRST_BIT_NUMBER * 4U)) - -/* --- CSR Register --- */ -/* Alias word address of LSION bit */ -#define RCC_CSR_OFFSET (RCC_OFFSET + 0x74U) -#define RCC_LSION_BIT_NUMBER 0x00U -#define RCC_CSR_LSION_BB (PERIPH_BB_BASE + (RCC_CSR_OFFSET * 32U) + (RCC_LSION_BIT_NUMBER * 4U)) - -/* CR register byte 3 (Bits[23:16]) base address */ -#define RCC_CR_BYTE2_ADDRESS 0x40023802U - -/* CIR register byte 2 (Bits[15:8]) base address */ -#define RCC_CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + 0x0CU + 0x01U)) - -/* CIR register byte 3 (Bits[23:16]) base address */ -#define RCC_CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + 0x0CU + 0x02U)) - -/* BDCR register base address */ -#define RCC_BDCR_BYTE0_ADDRESS (PERIPH_BASE + RCC_BDCR_OFFSET) - -#define RCC_DBP_TIMEOUT_VALUE 2U -#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT - -#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT -#define HSI_TIMEOUT_VALUE 2U /* 2 ms */ -#define LSI_TIMEOUT_VALUE 2U /* 2 ms */ -#define CLOCKSWITCH_TIMEOUT_VALUE 5000U /* 5 s */ - -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup RCC_Private_Macros RCC Private Macros - * @{ - */ - -/** @defgroup RCC_IS_RCC_Definitions RCC Private macros to check input parameters - * @{ - */ -#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) ((OSCILLATOR) <= 15U) - -#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \ - ((HSE) == RCC_HSE_BYPASS)) - -#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \ - ((LSE) == RCC_LSE_BYPASS)) - -#define IS_RCC_HSI(HSI) (((HSI) == RCC_HSI_OFF) || ((HSI) == RCC_HSI_ON)) - -#define IS_RCC_LSI(LSI) (((LSI) == RCC_LSI_OFF) || ((LSI) == RCC_LSI_ON)) - -#define IS_RCC_PLL(PLL) (((PLL) == RCC_PLL_NONE) ||((PLL) == RCC_PLL_OFF) || ((PLL) == RCC_PLL_ON)) - -#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \ - ((SOURCE) == RCC_PLLSOURCE_HSE)) - -#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \ - ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \ - ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK) || \ - ((SOURCE) == RCC_SYSCLKSOURCE_PLLRCLK)) - -#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV2) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV3) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV4) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV5) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV6) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV7) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV8) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV9) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV10) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV11) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV12) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV13) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV14) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV15) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV16) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV17) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV18) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV19) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV20) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV21) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV22) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV23) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV24) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV25) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV26) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV27) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV28) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV29) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV30) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV31)) - -#define IS_RCC_PLLM_VALUE(VALUE) ((VALUE) <= 63U) - -#define IS_RCC_PLLP_VALUE(VALUE) (((VALUE) == 2U) || ((VALUE) == 4U) || ((VALUE) == 6U) || ((VALUE) == 8U)) - -#define IS_RCC_PLLQ_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 15U)) - -#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_DIV1) || ((HCLK) == RCC_SYSCLK_DIV2) || \ - ((HCLK) == RCC_SYSCLK_DIV4) || ((HCLK) == RCC_SYSCLK_DIV8) || \ - ((HCLK) == RCC_SYSCLK_DIV16) || ((HCLK) == RCC_SYSCLK_DIV64) || \ - ((HCLK) == RCC_SYSCLK_DIV128) || ((HCLK) == RCC_SYSCLK_DIV256) || \ - ((HCLK) == RCC_SYSCLK_DIV512)) - -#define IS_RCC_CLOCKTYPE(CLK) ((1U <= (CLK)) && ((CLK) <= 15U)) - -#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_DIV1) || ((PCLK) == RCC_HCLK_DIV2) || \ - ((PCLK) == RCC_HCLK_DIV4) || ((PCLK) == RCC_HCLK_DIV8) || \ - ((PCLK) == RCC_HCLK_DIV16)) - -#define IS_RCC_MCO(MCOx) (((MCOx) == RCC_MCO1) || ((MCOx) == RCC_MCO2)) - -#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_HSI) || ((SOURCE) == RCC_MCO1SOURCE_LSE) || \ - ((SOURCE) == RCC_MCO1SOURCE_HSE) || ((SOURCE) == RCC_MCO1SOURCE_PLLCLK)) - -#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1) || ((DIV) == RCC_MCODIV_2) || \ - ((DIV) == RCC_MCODIV_3) || ((DIV) == RCC_MCODIV_4) || \ - ((DIV) == RCC_MCODIV_5)) -#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1FU) - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_RCC_H */ - +/** + ****************************************************************************** + * @file stm32f4xx_hal_rcc.h + * @author MCD Application Team + * @brief Header file of RCC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_RCC_H +#define __STM32F4xx_HAL_RCC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +/* Include RCC HAL Extended module */ +/* (include on top of file since RCC structures are defined in extended file) */ +#include "stm32f4xx_hal_rcc_ex.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RCC_Exported_Types RCC Exported Types + * @{ + */ + +/** + * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition + */ +typedef struct +{ + uint32_t OscillatorType; /*!< The oscillators to be configured. + This parameter can be a value of @ref RCC_Oscillator_Type */ + + uint32_t HSEState; /*!< The new state of the HSE. + This parameter can be a value of @ref RCC_HSE_Config */ + + uint32_t LSEState; /*!< The new state of the LSE. + This parameter can be a value of @ref RCC_LSE_Config */ + + uint32_t HSIState; /*!< The new state of the HSI. + This parameter can be a value of @ref RCC_HSI_Config */ + + uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT). + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */ + + uint32_t LSIState; /*!< The new state of the LSI. + This parameter can be a value of @ref RCC_LSI_Config */ + + RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */ +}RCC_OscInitTypeDef; + +/** + * @brief RCC System, AHB and APB busses clock configuration structure definition + */ +typedef struct +{ + uint32_t ClockType; /*!< The clock to be configured. + This parameter can be a value of @ref RCC_System_Clock_Type */ + + uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock. + This parameter can be a value of @ref RCC_System_Clock_Source */ + + uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). + This parameter can be a value of @ref RCC_AHB_Clock_Source */ + + uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */ + + uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */ + +}RCC_ClkInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_Oscillator_Type Oscillator Type + * @{ + */ +#define RCC_OSCILLATORTYPE_NONE 0x00000000U +#define RCC_OSCILLATORTYPE_HSE 0x00000001U +#define RCC_OSCILLATORTYPE_HSI 0x00000002U +#define RCC_OSCILLATORTYPE_LSE 0x00000004U +#define RCC_OSCILLATORTYPE_LSI 0x00000008U +/** + * @} + */ + +/** @defgroup RCC_HSE_Config HSE Config + * @{ + */ +#define RCC_HSE_OFF 0x00000000U +#define RCC_HSE_ON RCC_CR_HSEON +#define RCC_HSE_BYPASS ((uint32_t)(RCC_CR_HSEBYP | RCC_CR_HSEON)) +/** + * @} + */ + +/** @defgroup RCC_LSE_Config LSE Config + * @{ + */ +#define RCC_LSE_OFF 0x00000000U +#define RCC_LSE_ON RCC_BDCR_LSEON +#define RCC_LSE_BYPASS ((uint32_t)(RCC_BDCR_LSEBYP | RCC_BDCR_LSEON)) +/** + * @} + */ + +/** @defgroup RCC_HSI_Config HSI Config + * @{ + */ +#define RCC_HSI_OFF ((uint8_t)0x00) +#define RCC_HSI_ON ((uint8_t)0x01) + +#define RCC_HSICALIBRATION_DEFAULT 0x10U /* Default HSI calibration trimming value */ +/** + * @} + */ + +/** @defgroup RCC_LSI_Config LSI Config + * @{ + */ +#define RCC_LSI_OFF ((uint8_t)0x00) +#define RCC_LSI_ON ((uint8_t)0x01) +/** + * @} + */ + +/** @defgroup RCC_PLL_Config PLL Config + * @{ + */ +#define RCC_PLL_NONE ((uint8_t)0x00) +#define RCC_PLL_OFF ((uint8_t)0x01) +#define RCC_PLL_ON ((uint8_t)0x02) +/** + * @} + */ + +/** @defgroup RCC_PLLP_Clock_Divider PLLP Clock Divider + * @{ + */ +#define RCC_PLLP_DIV2 0x00000002U +#define RCC_PLLP_DIV4 0x00000004U +#define RCC_PLLP_DIV6 0x00000006U +#define RCC_PLLP_DIV8 0x00000008U +/** + * @} + */ + +/** @defgroup RCC_PLL_Clock_Source PLL Clock Source + * @{ + */ +#define RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI +#define RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Type System Clock Type + * @{ + */ +#define RCC_CLOCKTYPE_SYSCLK 0x00000001U +#define RCC_CLOCKTYPE_HCLK 0x00000002U +#define RCC_CLOCKTYPE_PCLK1 0x00000004U +#define RCC_CLOCKTYPE_PCLK2 0x00000008U +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source System Clock Source + * @note The RCC_SYSCLKSOURCE_PLLRCLK parameter is available only for + * STM32F446xx devices. + * @{ + */ +#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI +#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE +#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL +#define RCC_SYSCLKSOURCE_PLLRCLK ((uint32_t)(RCC_CFGR_SW_0 | RCC_CFGR_SW_1)) +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status + * @note The RCC_SYSCLKSOURCE_STATUS_PLLRCLK parameter is available only for + * STM32F446xx devices. + * @{ + */ +#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_PLLRCLK ((uint32_t)(RCC_CFGR_SWS_0 | RCC_CFGR_SWS_1)) /*!< PLLR used as system clock */ +/** + * @} + */ + +/** @defgroup RCC_AHB_Clock_Source AHB Clock Source + * @{ + */ +#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1 +#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2 +#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4 +#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8 +#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16 +#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64 +#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128 +#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256 +#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512 +/** + * @} + */ + +/** @defgroup RCC_APB1_APB2_Clock_Source APB1/APB2 Clock Source + * @{ + */ +#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1 +#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2 +#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4 +#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8 +#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16 +/** + * @} + */ + +/** @defgroup RCC_RTC_Clock_Source RTC Clock Source + * @{ + */ +#define RCC_RTCCLKSOURCE_NO_CLK 0x00000000U +#define RCC_RTCCLKSOURCE_LSE 0x00000100U +#define RCC_RTCCLKSOURCE_LSI 0x00000200U +#define RCC_RTCCLKSOURCE_HSE_DIVX 0x00000300U +#define RCC_RTCCLKSOURCE_HSE_DIV2 0x00020300U +#define RCC_RTCCLKSOURCE_HSE_DIV3 0x00030300U +#define RCC_RTCCLKSOURCE_HSE_DIV4 0x00040300U +#define RCC_RTCCLKSOURCE_HSE_DIV5 0x00050300U +#define RCC_RTCCLKSOURCE_HSE_DIV6 0x00060300U +#define RCC_RTCCLKSOURCE_HSE_DIV7 0x00070300U +#define RCC_RTCCLKSOURCE_HSE_DIV8 0x00080300U +#define RCC_RTCCLKSOURCE_HSE_DIV9 0x00090300U +#define RCC_RTCCLKSOURCE_HSE_DIV10 0x000A0300U +#define RCC_RTCCLKSOURCE_HSE_DIV11 0x000B0300U +#define RCC_RTCCLKSOURCE_HSE_DIV12 0x000C0300U +#define RCC_RTCCLKSOURCE_HSE_DIV13 0x000D0300U +#define RCC_RTCCLKSOURCE_HSE_DIV14 0x000E0300U +#define RCC_RTCCLKSOURCE_HSE_DIV15 0x000F0300U +#define RCC_RTCCLKSOURCE_HSE_DIV16 0x00100300U +#define RCC_RTCCLKSOURCE_HSE_DIV17 0x00110300U +#define RCC_RTCCLKSOURCE_HSE_DIV18 0x00120300U +#define RCC_RTCCLKSOURCE_HSE_DIV19 0x00130300U +#define RCC_RTCCLKSOURCE_HSE_DIV20 0x00140300U +#define RCC_RTCCLKSOURCE_HSE_DIV21 0x00150300U +#define RCC_RTCCLKSOURCE_HSE_DIV22 0x00160300U +#define RCC_RTCCLKSOURCE_HSE_DIV23 0x00170300U +#define RCC_RTCCLKSOURCE_HSE_DIV24 0x00180300U +#define RCC_RTCCLKSOURCE_HSE_DIV25 0x00190300U +#define RCC_RTCCLKSOURCE_HSE_DIV26 0x001A0300U +#define RCC_RTCCLKSOURCE_HSE_DIV27 0x001B0300U +#define RCC_RTCCLKSOURCE_HSE_DIV28 0x001C0300U +#define RCC_RTCCLKSOURCE_HSE_DIV29 0x001D0300U +#define RCC_RTCCLKSOURCE_HSE_DIV30 0x001E0300U +#define RCC_RTCCLKSOURCE_HSE_DIV31 0x001F0300U +/** + * @} + */ + +/** @defgroup RCC_MCO_Index MCO Index + * @{ + */ +#define RCC_MCO1 0x00000000U +#define RCC_MCO2 0x00000001U +/** + * @} + */ + +/** @defgroup RCC_MCO1_Clock_Source MCO1 Clock Source + * @{ + */ +#define RCC_MCO1SOURCE_HSI 0x00000000U +#define RCC_MCO1SOURCE_LSE RCC_CFGR_MCO1_0 +#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCO1_1 +#define RCC_MCO1SOURCE_PLLCLK RCC_CFGR_MCO1 +/** + * @} + */ + +/** @defgroup RCC_MCOx_Clock_Prescaler MCOx Clock Prescaler + * @{ + */ +#define RCC_MCODIV_1 0x00000000U +#define RCC_MCODIV_2 RCC_CFGR_MCO1PRE_2 +#define RCC_MCODIV_3 ((uint32_t)RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_2) +#define RCC_MCODIV_4 ((uint32_t)RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2) +#define RCC_MCODIV_5 RCC_CFGR_MCO1PRE +/** + * @} + */ + +/** @defgroup RCC_Interrupt Interrupts + * @{ + */ +#define RCC_IT_LSIRDY ((uint8_t)0x01) +#define RCC_IT_LSERDY ((uint8_t)0x02) +#define RCC_IT_HSIRDY ((uint8_t)0x04) +#define RCC_IT_HSERDY ((uint8_t)0x08) +#define RCC_IT_PLLRDY ((uint8_t)0x10) +#define RCC_IT_PLLI2SRDY ((uint8_t)0x20) +#define RCC_IT_CSS ((uint8_t)0x80) +/** + * @} + */ + +/** @defgroup RCC_Flag Flags + * Elements values convention: 0XXYYYYYb + * - YYYYY : Flag position in the register + * - 0XX : Register index + * - 01: CR register + * - 10: BDCR register + * - 11: CSR register + * @{ + */ +/* Flags in the CR register */ +#define RCC_FLAG_HSIRDY ((uint8_t)0x21) +#define RCC_FLAG_HSERDY ((uint8_t)0x31) +#define RCC_FLAG_PLLRDY ((uint8_t)0x39) +#define RCC_FLAG_PLLI2SRDY ((uint8_t)0x3B) + +/* Flags in the BDCR register */ +#define RCC_FLAG_LSERDY ((uint8_t)0x41) + +/* Flags in the CSR register */ +#define RCC_FLAG_LSIRDY ((uint8_t)0x61) +#define RCC_FLAG_BORRST ((uint8_t)0x79) +#define RCC_FLAG_PINRST ((uint8_t)0x7A) +#define RCC_FLAG_PORRST ((uint8_t)0x7B) +#define RCC_FLAG_SFTRST ((uint8_t)0x7C) +#define RCC_FLAG_IWDGRST ((uint8_t)0x7D) +#define RCC_FLAG_WWDGRST ((uint8_t)0x7E) +#define RCC_FLAG_LPWRRST ((uint8_t)0x7F) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RCC_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable + * @brief Enable or disable the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_DMA1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_DMA2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOAEN)) +#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOBEN)) +#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOCEN)) +#define __HAL_RCC_GPIOH_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOHEN)) +#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA1EN)) +#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2EN)) +/** + * @} + */ + +/** @defgroup RCC_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOAEN)) != RESET) +#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOBEN)) != RESET) +#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOCEN)) != RESET) +#define __HAL_RCC_GPIOH_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOHEN)) != RESET) +#define __HAL_RCC_DMA1_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA1EN)) != RESET) +#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA2EN)) != RESET) + +#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOAEN)) == RESET) +#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOBEN)) == RESET) +#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOCEN)) == RESET) +#define __HAL_RCC_GPIOH_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOHEN)) == RESET) +#define __HAL_RCC_DMA1_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA1EN)) == RESET) +#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA2EN)) == RESET) +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable + * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_WWDG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SPI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_USART2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_I2C1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_I2C2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_PWR_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN)) +#define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN)) +#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN)) +#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN)) +#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN)) +#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN)) +#define __HAL_RCC_PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN)) +/** + * @} + */ + +/** @defgroup RCC_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) != RESET) +#define __HAL_RCC_WWDG_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) != RESET) +#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET) +#define __HAL_RCC_USART2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) != RESET) +#define __HAL_RCC_I2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) != RESET) +#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET) +#define __HAL_RCC_PWR_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) != RESET) + +#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) == RESET) +#define __HAL_RCC_WWDG_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) == RESET) +#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET) +#define __HAL_RCC_USART2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) == RESET) +#define __HAL_RCC_I2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) == RESET) +#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET) +#define __HAL_RCC_PWR_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) == RESET) +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable + * @brief Enable or disable the High Speed APB (APB2) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_USART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_USART6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_ADC1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SPI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM9_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM11_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN)) +#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN)) +#define __HAL_RCC_USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN)) +#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN)) +#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN)) +#define __HAL_RCC_SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN)) +#define __HAL_RCC_TIM9_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM9EN)) +#define __HAL_RCC_TIM11_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM11EN)) +/** + * @} + */ + +/** @defgroup RCC_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) != RESET) +#define __HAL_RCC_USART1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) != RESET) +#define __HAL_RCC_USART6_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) != RESET) +#define __HAL_RCC_ADC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) != RESET) +#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET) +#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) != RESET) +#define __HAL_RCC_TIM9_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) != RESET) +#define __HAL_RCC_TIM11_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) != RESET) + +#define __HAL_RCC_TIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) == RESET) +#define __HAL_RCC_USART1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) == RESET) +#define __HAL_RCC_USART6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) == RESET) +#define __HAL_RCC_ADC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) == RESET) +#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET) +#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) == RESET) +#define __HAL_RCC_TIM9_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) == RESET) +#define __HAL_RCC_TIM11_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) == RESET) +/** + * @} + */ + +/** @defgroup RCC_AHB1_Force_Release_Reset AHB1 Force Release Reset + * @brief Force or release AHB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOARST)) +#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOBRST)) +#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOCRST)) +#define __HAL_RCC_GPIOH_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOHRST)) +#define __HAL_RCC_DMA1_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA1RST)) +#define __HAL_RCC_DMA2_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2RST)) + +#define __HAL_RCC_AHB1_RELEASE_RESET() (RCC->AHB1RSTR = 0x00U) +#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOARST)) +#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOBRST)) +#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOCRST)) +#define __HAL_RCC_GPIOH_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOHRST)) +#define __HAL_RCC_DMA1_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA1RST)) +#define __HAL_RCC_DMA2_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2RST)) +/** + * @} + */ + +/** @defgroup RCC_APB1_Force_Release_Reset APB1 Force Release Reset + * @brief Force or release APB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST)) +#define __HAL_RCC_WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST)) +#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST)) +#define __HAL_RCC_USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST)) +#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST)) +#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST)) +#define __HAL_RCC_PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST)) + +#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00U) +#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST)) +#define __HAL_RCC_WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST)) +#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST)) +#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST)) +#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST)) +#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST)) +#define __HAL_RCC_PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST)) +/** + * @} + */ + +/** @defgroup RCC_APB2_Force_Release_Reset APB2 Force Release Reset + * @brief Force or release APB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST)) +#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST)) +#define __HAL_RCC_USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST)) +#define __HAL_RCC_ADC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADCRST)) +#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST)) +#define __HAL_RCC_SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST)) +#define __HAL_RCC_TIM9_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM9RST)) +#define __HAL_RCC_TIM11_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM11RST)) + +#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00U) +#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST)) +#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST)) +#define __HAL_RCC_USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST)) +#define __HAL_RCC_ADC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADCRST)) +#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST)) +#define __HAL_RCC_SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST)) +#define __HAL_RCC_TIM9_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM9RST)) +#define __HAL_RCC_TIM11_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM11RST)) +/** + * @} + */ + +/** @defgroup RCC_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable + * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOALPEN)) +#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOBLPEN)) +#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOCLPEN)) +#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOHLPEN)) +#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA1LPEN)) +#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2LPEN)) + +#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOALPEN)) +#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOBLPEN)) +#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOCLPEN)) +#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOHLPEN)) +#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA1LPEN)) +#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2LPEN)) +/** + * @} + */ + +/** @defgroup RCC_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable + * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_TIM5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM5LPEN)) +#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_WWDGLPEN)) +#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI2LPEN)) +#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART2LPEN)) +#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C1LPEN)) +#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C2LPEN)) +#define __HAL_RCC_PWR_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_PWRLPEN)) + +#define __HAL_RCC_TIM5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM5LPEN)) +#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_WWDGLPEN)) +#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI2LPEN)) +#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART2LPEN)) +#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C1LPEN)) +#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C2LPEN)) +#define __HAL_RCC_PWR_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_PWRLPEN)) +/** + * @} + */ + +/** @defgroup RCC_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable + * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM1LPEN)) +#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART1LPEN)) +#define __HAL_RCC_USART6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART6LPEN)) +#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC1LPEN)) +#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI1LPEN)) +#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SYSCFGLPEN)) +#define __HAL_RCC_TIM9_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM9LPEN)) +#define __HAL_RCC_TIM11_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM11LPEN)) + +#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM1LPEN)) +#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART1LPEN)) +#define __HAL_RCC_USART6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART6LPEN)) +#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC1LPEN)) +#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI1LPEN)) +#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SYSCFGLPEN)) +#define __HAL_RCC_TIM9_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM9LPEN)) +#define __HAL_RCC_TIM11_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM11LPEN)) +/** + * @} + */ + +/** @defgroup RCC_HSI_Configuration HSI Configuration + * @{ + */ + +/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI). + * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. + * It is used (enabled by hardware) as system clock source after startup + * from Reset, wake-up from STOP and STANDBY mode, or in case of failure + * of the HSE used directly or indirectly as system clock (if the Clock + * Security System CSS is enabled). + * @note HSI can not be stopped if it is used as system clock source. In this case, + * you have to select another source of the system clock then stop the HSI. + * @note After enabling the HSI, the application software should wait on HSIRDY + * flag to be set indicating that HSI clock is stable and can be used as + * system clock source. + * This parameter can be: ENABLE or DISABLE. + * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator + * clock cycles. + */ +#define __HAL_RCC_HSI_ENABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = ENABLE) +#define __HAL_RCC_HSI_DISABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = DISABLE) + +/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI RC. + * @param __HSICalibrationValue__ specifies the calibration trimming value. + * (default is RCC_HSICALIBRATION_DEFAULT). + * This parameter must be a number between 0 and 0x1F. + */ +#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) (MODIFY_REG(RCC->CR,\ + RCC_CR_HSITRIM, (uint32_t)(__HSICalibrationValue__) << RCC_CR_HSITRIM_Pos)) +/** + * @} + */ + +/** @defgroup RCC_LSI_Configuration LSI Configuration + * @{ + */ + +/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI). + * @note After enabling the LSI, the application software should wait on + * LSIRDY flag to be set indicating that LSI clock is stable and can + * be used to clock the IWDG and/or the RTC. + * @note LSI can not be disabled if the IWDG is running. + * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator + * clock cycles. + */ +#define __HAL_RCC_LSI_ENABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = ENABLE) +#define __HAL_RCC_LSI_DISABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = DISABLE) +/** + * @} + */ + +/** @defgroup RCC_HSE_Configuration HSE Configuration + * @{ + */ + +/** + * @brief Macro to configure the External High Speed oscillator (HSE). + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not supported by this macro. + * User should request a transition to HSE Off first and then HSE On or HSE Bypass. + * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application + * software should wait on HSERDY flag to be set indicating that HSE clock + * is stable and can be used to clock the PLL and/or system clock. + * @note HSE state can not be changed if it is used directly or through the + * PLL as system clock. In this case, you have to select another source + * of the system clock then change the HSE state (ex. disable it). + * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. + * @note This function reset the CSSON bit, so if the clock security system(CSS) + * was previously enabled you have to enable it again after calling this + * function. + * @param __STATE__ specifies the new state of the HSE. + * This parameter can be one of the following values: + * @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after + * 6 HSE oscillator clock cycles. + * @arg RCC_HSE_ON: turn ON the HSE oscillator. + * @arg RCC_HSE_BYPASS: HSE oscillator bypassed with external clock. + */ +#define __HAL_RCC_HSE_CONFIG(__STATE__) \ + do { \ + if ((__STATE__) == RCC_HSE_ON) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else if ((__STATE__) == RCC_HSE_BYPASS) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + } \ + } while(0U) +/** + * @} + */ + +/** @defgroup RCC_LSE_Configuration LSE Configuration + * @{ + */ + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE). + * @note Transition LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro. + * User should request a transition to LSE Off first and then LSE On or LSE Bypass. + * @note As the LSE is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * HAL_PWR_EnableBkUpAccess() function before to configure the LSE + * (to be done once after reset). + * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application + * software should wait on LSERDY flag to be set indicating that LSE clock + * is stable and can be used to clock the RTC. + * @param __STATE__ specifies the new state of the LSE. + * This parameter can be one of the following values: + * @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after + * 6 LSE oscillator clock cycles. + * @arg RCC_LSE_ON: turn ON the LSE oscillator. + * @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock. + */ +#define __HAL_RCC_LSE_CONFIG(__STATE__) \ + do { \ + if((__STATE__) == RCC_LSE_ON) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else if((__STATE__) == RCC_LSE_BYPASS) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + } \ + } while(0U) +/** + * @} + */ + +/** @defgroup RCC_Internal_RTC_Clock_Configuration RTC Clock Configuration + * @{ + */ + +/** @brief Macros to enable or disable the RTC clock. + * @note These macros must be used only after the RTC clock source was selected. + */ +#define __HAL_RCC_RTC_ENABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = ENABLE) +#define __HAL_RCC_RTC_DISABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = DISABLE) + +/** @brief Macros to configure the RTC clock (RTCCLK). + * @note As the RTC clock configuration bits are in the Backup domain and write + * access is denied to this domain after reset, you have to enable write + * access using the Power Backup Access macro before to configure + * the RTC clock source (to be done once after reset). + * @note Once the RTC clock is configured it can't be changed unless the + * Backup domain is reset using __HAL_RCC_BackupReset_RELEASE() macro, or by + * a Power On Reset (POR). + * @param __RTCCLKSource__ specifies the RTC clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_RTCCLKSOURCE_NO_CLK : No clock selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSE : LSE selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSI : LSI selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX HSE divided by X selected as RTC clock (X can be retrieved thanks to @ref __HAL_RCC_GET_RTC_HSE_PRESCALER() + * @note If the LSE or LSI is used as RTC clock source, the RTC continues to + * work in STOP and STANDBY modes, and can be used as wake-up source. + * However, when the HSE clock is used as RTC clock source, the RTC + * cannot be used in STOP and STANDBY modes. + * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as + * RTC clock source). + */ +#define __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__) (((__RTCCLKSource__) & RCC_BDCR_RTCSEL) == RCC_BDCR_RTCSEL) ? \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, ((__RTCCLKSource__) & 0xFFFFCFFU)) : CLEAR_BIT(RCC->CFGR, RCC_CFGR_RTCPRE) + +#define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) do { __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__); \ + RCC->BDCR |= ((__RTCCLKSource__) & 0x00000FFFU); \ + } while(0U) + +/** @brief Macro to get the RTC clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX HSE divided by X selected as RTC clock (X can be retrieved thanks to @ref __HAL_RCC_GET_RTC_HSE_PRESCALER() + */ +#define __HAL_RCC_GET_RTC_SOURCE() (READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)) + +/** + * @brief Get the RTC and HSE clock divider (RTCPRE). + * @retval Returned value can be one of the following values: + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX HSE divided by X selected as RTC clock (X can be retrieved thanks to @ref __HAL_RCC_GET_RTC_HSE_PRESCALER() + */ +#define __HAL_RCC_GET_RTC_HSE_PRESCALER() (READ_BIT(RCC->CFGR, RCC_CFGR_RTCPRE) | RCC_BDCR_RTCSEL) + +/** @brief Macros to force or release the Backup domain reset. + * @note This function resets the RTC peripheral (including the backup registers) + * and the RTC clock source selection in RCC_CSR register. + * @note The BKPSRAM is not affected by this reset. + */ +#define __HAL_RCC_BACKUPRESET_FORCE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = ENABLE) +#define __HAL_RCC_BACKUPRESET_RELEASE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = DISABLE) +/** + * @} + */ + +/** @defgroup RCC_PLL_Configuration PLL Configuration + * @{ + */ + +/** @brief Macros to enable or disable the main PLL. + * @note After enabling the main PLL, the application software should wait on + * PLLRDY flag to be set indicating that PLL clock is stable and can + * be used as system clock source. + * @note The main PLL can not be disabled if it is used as system clock source + * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes. + */ +#define __HAL_RCC_PLL_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = ENABLE) +#define __HAL_RCC_PLL_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = DISABLE) + +/** @brief Macro to configure the PLL clock source. + * @note This function must be used only when the main PLL is disabled. + * @param __PLLSOURCE__ specifies the PLL entry clock source. + * This parameter can be one of the following values: + * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry + * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry + * + */ +#define __HAL_RCC_PLL_PLLSOURCE_CONFIG(__PLLSOURCE__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (__PLLSOURCE__)) + +/** @brief Macro to configure the PLL multiplication factor. + * @note This function must be used only when the main PLL is disabled. + * @param __PLLM__ specifies the division factor for PLL VCO input clock + * This parameter must be a number between Min_Data = 2 and Max_Data = 63. + * @note You have to set the PLLM parameter correctly to ensure that the VCO input + * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency + * of 2 MHz to limit PLL jitter. + * + */ +#define __HAL_RCC_PLL_PLLM_CONFIG(__PLLM__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, (__PLLM__)) +/** + * @} + */ + +/** @defgroup RCC_Get_Clock_source Get Clock source + * @{ + */ +/** + * @brief Macro to configure the system clock source. + * @param __RCC_SYSCLKSOURCE__ specifies the system clock source. + * This parameter can be one of the following values: + * - RCC_SYSCLKSOURCE_HSI: HSI oscillator is used as system clock source. + * - RCC_SYSCLKSOURCE_HSE: HSE oscillator is used as system clock source. + * - RCC_SYSCLKSOURCE_PLLCLK: PLL output is used as system clock source. + * - RCC_SYSCLKSOURCE_PLLRCLK: PLLR output is used as system clock source. This + * parameter is available only for STM32F446xx devices. + */ +#define __HAL_RCC_SYSCLK_CONFIG(__RCC_SYSCLKSOURCE__) MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__RCC_SYSCLKSOURCE__)) + +/** @brief Macro to get the clock source used as system clock. + * @retval The clock source used as system clock. The returned value can be one + * of the following: + * - RCC_SYSCLKSOURCE_STATUS_HSI: HSI used as system clock. + * - RCC_SYSCLKSOURCE_STATUS_HSE: HSE used as system clock. + * - RCC_SYSCLKSOURCE_STATUS_PLLCLK: PLL used as system clock. + * - RCC_SYSCLKSOURCE_STATUS_PLLRCLK: PLLR used as system clock. This parameter + * is available only for STM32F446xx devices. + */ +#define __HAL_RCC_GET_SYSCLK_SOURCE() (RCC->CFGR & RCC_CFGR_SWS) + +/** @brief Macro to get the oscillator used as PLL clock source. + * @retval The oscillator used as PLL clock source. The returned value can be one + * of the following: + * - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source. + * - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source. + */ +#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC)) +/** + * @} + */ + +/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config + * @{ + */ + +/** @brief Macro to configure the MCO1 clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source + * @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source + * @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source + * @arg RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg RCC_MCODIV_1: no division applied to MCOx clock + * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock + * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock + * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock + * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock + */ +#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), ((__MCOCLKSOURCE__) | (__MCODIV__))) + +/** @brief Macro to configure the MCO2 clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source + * @arg RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source, available for all STM32F4 devices except STM32F410xx + * @arg RCC_MCO2SOURCE_I2SCLK: I2SCLK clock selected as MCO2 source, available only for STM32F410Rx devices + * @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source + * @arg RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg RCC_MCODIV_1: no division applied to MCOx clock + * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock + * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock + * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock + * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock + * @note For STM32F410Rx devices, to output I2SCLK clock on MCO2, you should have + * at least one of the SPI clocks enabled (SPI1, SPI2 or SPI5). + */ +#define __HAL_RCC_MCO2_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | ((__MCODIV__) << 3U))); +/** + * @} + */ + +/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management + * @brief macros to manage the specified RCC Flags and interrupts. + * @{ + */ + +/** @brief Enable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to enable + * the selected interrupts). + * @param __INTERRUPT__ specifies the RCC interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt. + * @arg RCC_IT_LSERDY: LSE ready interrupt. + * @arg RCC_IT_HSIRDY: HSI ready interrupt. + * @arg RCC_IT_HSERDY: HSE ready interrupt. + * @arg RCC_IT_PLLRDY: Main PLL ready interrupt. + * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt. + */ +#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__)) + +/** @brief Disable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to disable + * the selected interrupts). + * @param __INTERRUPT__ specifies the RCC interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt. + * @arg RCC_IT_LSERDY: LSE ready interrupt. + * @arg RCC_IT_HSIRDY: HSI ready interrupt. + * @arg RCC_IT_HSERDY: HSE ready interrupt. + * @arg RCC_IT_PLLRDY: Main PLL ready interrupt. + * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt. + */ +#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= (uint8_t)(~(__INTERRUPT__))) + +/** @brief Clear the RCC's interrupt pending bits (Perform Byte access to RCC_CIR[23:16] + * bits to clear the selected interrupt pending bits. + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt. + * @arg RCC_IT_LSERDY: LSE ready interrupt. + * @arg RCC_IT_HSIRDY: HSI ready interrupt. + * @arg RCC_IT_HSERDY: HSE ready interrupt. + * @arg RCC_IT_PLLRDY: Main PLL ready interrupt. + * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt. + * @arg RCC_IT_CSS: Clock Security System interrupt + */ +#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__)) + +/** @brief Check the RCC's interrupt has occurred or not. + * @param __INTERRUPT__ specifies the RCC interrupt source to check. + * This parameter can be one of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt. + * @arg RCC_IT_LSERDY: LSE ready interrupt. + * @arg RCC_IT_HSIRDY: HSI ready interrupt. + * @arg RCC_IT_HSERDY: HSE ready interrupt. + * @arg RCC_IT_PLLRDY: Main PLL ready interrupt. + * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt. + * @arg RCC_IT_CSS: Clock Security System interrupt + * @retval The new state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** @brief Set RMVF bit to clear the reset flags: RCC_FLAG_PINRST, RCC_FLAG_PORRST, + * RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST and RCC_FLAG_LPWRRST. + */ +#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF) + +/** @brief Check RCC flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready. + * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready. + * @arg RCC_FLAG_PLLRDY: Main PLL clock ready. + * @arg RCC_FLAG_PLLI2SRDY: PLLI2S clock ready. + * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready. + * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready. + * @arg RCC_FLAG_BORRST: POR/PDR or BOR reset. + * @arg RCC_FLAG_PINRST: Pin reset. + * @arg RCC_FLAG_PORRST: POR/PDR reset. + * @arg RCC_FLAG_SFTRST: Software reset. + * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset. + * @arg RCC_FLAG_WWDGRST: Window Watchdog reset. + * @arg RCC_FLAG_LPWRRST: Low Power reset. + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define RCC_FLAG_MASK ((uint8_t)0x1FU) +#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == 1U)? RCC->CR :((((__FLAG__) >> 5U) == 2U) ? RCC->BDCR :((((__FLAG__) >> 5U) == 3U)? RCC->CSR :RCC->CIR))) & (1U << ((__FLAG__) & RCC_FLAG_MASK)))!= 0U)? 1U : 0U) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + /** @addtogroup RCC_Exported_Functions + * @{ + */ + +/** @addtogroup RCC_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions ******************************/ +HAL_StatusTypeDef HAL_RCC_DeInit(void); +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency); +/** + * @} + */ + +/** @addtogroup RCC_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions ************************************************/ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv); +void HAL_RCC_EnableCSS(void); +void HAL_RCC_DisableCSS(void); +uint32_t HAL_RCC_GetSysClockFreq(void); +uint32_t HAL_RCC_GetHCLKFreq(void); +uint32_t HAL_RCC_GetPCLK1Freq(void); +uint32_t HAL_RCC_GetPCLK2Freq(void); +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency); + +/* CSS NMI IRQ handler */ +void HAL_RCC_NMI_IRQHandler(void); + +/* User Callbacks in non blocking mode (IT mode) */ +void HAL_RCC_CSSCallback(void); + +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RCC_Private_Constants RCC Private Constants + * @{ + */ + +/** @defgroup RCC_BitAddress_AliasRegion RCC BitAddress AliasRegion + * @brief RCC registers bit address in the alias region + * @{ + */ +#define RCC_OFFSET (RCC_BASE - PERIPH_BASE) +/* --- CR Register --- */ +/* Alias word address of HSION bit */ +#define RCC_CR_OFFSET (RCC_OFFSET + 0x00U) +#define RCC_HSION_BIT_NUMBER 0x00U +#define RCC_CR_HSION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_HSION_BIT_NUMBER * 4U)) +/* Alias word address of CSSON bit */ +#define RCC_CSSON_BIT_NUMBER 0x13U +#define RCC_CR_CSSON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_CSSON_BIT_NUMBER * 4U)) +/* Alias word address of PLLON bit */ +#define RCC_PLLON_BIT_NUMBER 0x18U +#define RCC_CR_PLLON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_PLLON_BIT_NUMBER * 4U)) + +/* --- BDCR Register --- */ +/* Alias word address of RTCEN bit */ +#define RCC_BDCR_OFFSET (RCC_OFFSET + 0x70U) +#define RCC_RTCEN_BIT_NUMBER 0x0FU +#define RCC_BDCR_RTCEN_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32U) + (RCC_RTCEN_BIT_NUMBER * 4U)) +/* Alias word address of BDRST bit */ +#define RCC_BDRST_BIT_NUMBER 0x10U +#define RCC_BDCR_BDRST_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32U) + (RCC_BDRST_BIT_NUMBER * 4U)) + +/* --- CSR Register --- */ +/* Alias word address of LSION bit */ +#define RCC_CSR_OFFSET (RCC_OFFSET + 0x74U) +#define RCC_LSION_BIT_NUMBER 0x00U +#define RCC_CSR_LSION_BB (PERIPH_BB_BASE + (RCC_CSR_OFFSET * 32U) + (RCC_LSION_BIT_NUMBER * 4U)) + +/* CR register byte 3 (Bits[23:16]) base address */ +#define RCC_CR_BYTE2_ADDRESS 0x40023802U + +/* CIR register byte 2 (Bits[15:8]) base address */ +#define RCC_CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + 0x0CU + 0x01U)) + +/* CIR register byte 3 (Bits[23:16]) base address */ +#define RCC_CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + 0x0CU + 0x02U)) + +/* BDCR register base address */ +#define RCC_BDCR_BYTE0_ADDRESS (PERIPH_BASE + RCC_BDCR_OFFSET) + +#define RCC_DBP_TIMEOUT_VALUE 2U +#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT + +#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT +#define HSI_TIMEOUT_VALUE 2U /* 2 ms */ +#define LSI_TIMEOUT_VALUE 2U /* 2 ms */ +#define CLOCKSWITCH_TIMEOUT_VALUE 5000U /* 5 s */ + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RCC_Private_Macros RCC Private Macros + * @{ + */ + +/** @defgroup RCC_IS_RCC_Definitions RCC Private macros to check input parameters + * @{ + */ +#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) ((OSCILLATOR) <= 15U) + +#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \ + ((HSE) == RCC_HSE_BYPASS)) + +#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \ + ((LSE) == RCC_LSE_BYPASS)) + +#define IS_RCC_HSI(HSI) (((HSI) == RCC_HSI_OFF) || ((HSI) == RCC_HSI_ON)) + +#define IS_RCC_LSI(LSI) (((LSI) == RCC_LSI_OFF) || ((LSI) == RCC_LSI_ON)) + +#define IS_RCC_PLL(PLL) (((PLL) == RCC_PLL_NONE) ||((PLL) == RCC_PLL_OFF) || ((PLL) == RCC_PLL_ON)) + +#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \ + ((SOURCE) == RCC_PLLSOURCE_HSE)) + +#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_PLLRCLK)) + +#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV2) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV3) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV4) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV5) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV6) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV7) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV8) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV9) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV10) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV11) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV12) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV13) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV14) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV15) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV16) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV17) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV18) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV19) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV20) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV21) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV22) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV23) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV24) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV25) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV26) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV27) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV28) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV29) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV30) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV31)) + +#define IS_RCC_PLLM_VALUE(VALUE) ((VALUE) <= 63U) + +#define IS_RCC_PLLP_VALUE(VALUE) (((VALUE) == 2U) || ((VALUE) == 4U) || ((VALUE) == 6U) || ((VALUE) == 8U)) + +#define IS_RCC_PLLQ_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 15U)) + +#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_DIV1) || ((HCLK) == RCC_SYSCLK_DIV2) || \ + ((HCLK) == RCC_SYSCLK_DIV4) || ((HCLK) == RCC_SYSCLK_DIV8) || \ + ((HCLK) == RCC_SYSCLK_DIV16) || ((HCLK) == RCC_SYSCLK_DIV64) || \ + ((HCLK) == RCC_SYSCLK_DIV128) || ((HCLK) == RCC_SYSCLK_DIV256) || \ + ((HCLK) == RCC_SYSCLK_DIV512)) + +#define IS_RCC_CLOCKTYPE(CLK) ((1U <= (CLK)) && ((CLK) <= 15U)) + +#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_DIV1) || ((PCLK) == RCC_HCLK_DIV2) || \ + ((PCLK) == RCC_HCLK_DIV4) || ((PCLK) == RCC_HCLK_DIV8) || \ + ((PCLK) == RCC_HCLK_DIV16)) + +#define IS_RCC_MCO(MCOx) (((MCOx) == RCC_MCO1) || ((MCOx) == RCC_MCO2)) + +#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_HSI) || ((SOURCE) == RCC_MCO1SOURCE_LSE) || \ + ((SOURCE) == RCC_MCO1SOURCE_HSE) || ((SOURCE) == RCC_MCO1SOURCE_PLLCLK)) + +#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1) || ((DIV) == RCC_MCODIV_2) || \ + ((DIV) == RCC_MCODIV_3) || ((DIV) == RCC_MCODIV_4) || \ + ((DIV) == RCC_MCODIV_5)) +#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1FU) + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_RCC_H */ + diff --git a/Drivers/stm32f4xx_hal_rcc_ex.c b/libs/hal/stm32f4xx_hal_rcc_ex.c similarity index 97% rename from Drivers/stm32f4xx_hal_rcc_ex.c rename to libs/hal/stm32f4xx_hal_rcc_ex.c index dd89656..5076628 100644 --- a/Drivers/stm32f4xx_hal_rcc_ex.c +++ b/libs/hal/stm32f4xx_hal_rcc_ex.c @@ -1,3784 +1,3784 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_rcc_ex.c - * @author MCD Application Team - * @brief Extension RCC HAL module driver. - * This file provides firmware functions to manage the following - * functionalities RCC extension peripheral: - * + Extended Peripheral Control functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup RCCEx RCCEx - * @brief RCCEx HAL module driver - * @{ - */ - -#ifdef HAL_RCC_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @addtogroup RCCEx_Private_Constants - * @{ - */ -/** - * @} - */ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions - * @{ - */ - -/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions - * @brief Extended Peripheral Control functions - * -@verbatim - =============================================================================== - ##### Extended Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the RCC Clocks - frequencies. - [..] - (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to - select the RTC clock source; in this case the Backup domain will be reset in - order to modify the RTC Clock source, as consequence RTC registers (including - the backup registers) and RCC_BDCR register are set to their reset values. - -@endverbatim - * @{ - */ - -#if defined(STM32F446xx) -/** - * @brief Initializes the RCC extended peripherals clocks according to the specified - * parameters in the RCC_PeriphCLKInitTypeDef. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * contains the configuration information for the Extended Peripherals - * clocks(I2S, SAI, LTDC RTC and TIM). - * - * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select - * the RTC clock source; in this case the Backup domain will be reset in - * order to modify the RTC Clock source, as consequence RTC registers (including - * the backup registers) and RCC_BDCR register are set to their reset values. - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tickstart = 0U; - uint32_t tmpreg1 = 0U; - uint32_t plli2sp = 0U; - uint32_t plli2sq = 0U; - uint32_t plli2sr = 0U; - uint32_t pllsaip = 0U; - uint32_t pllsaiq = 0U; - uint32_t plli2sused = 0U; - uint32_t pllsaiused = 0U; - - /* Check the peripheral clock selection parameters */ - assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); - - /*------------------------ I2S APB1 configuration --------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == (RCC_PERIPHCLK_I2S_APB1)) - { - /* Check the parameters */ - assert_param(IS_RCC_I2SAPB1CLKSOURCE(PeriphClkInit->I2sApb1ClockSelection)); - - /* Configure I2S Clock source */ - __HAL_RCC_I2S_APB1_CONFIG(PeriphClkInit->I2sApb1ClockSelection); - /* Enable the PLLI2S when it's used as clock source for I2S */ - if(PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S) - { - plli2sused = 1U; - } - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- I2S APB2 configuration ----------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == (RCC_PERIPHCLK_I2S_APB2)) - { - /* Check the parameters */ - assert_param(IS_RCC_I2SAPB2CLKSOURCE(PeriphClkInit->I2sApb2ClockSelection)); - - /* Configure I2S Clock source */ - __HAL_RCC_I2S_APB2_CONFIG(PeriphClkInit->I2sApb2ClockSelection); - /* Enable the PLLI2S when it's used as clock source for I2S */ - if(PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S) - { - plli2sused = 1U; - } - } - /*--------------------------------------------------------------------------*/ - - /*--------------------------- SAI1 configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == (RCC_PERIPHCLK_SAI1)) - { - /* Check the parameters */ - assert_param(IS_RCC_SAI1CLKSOURCE(PeriphClkInit->Sai1ClockSelection)); - - /* Configure SAI1 Clock source */ - __HAL_RCC_SAI1_CONFIG(PeriphClkInit->Sai1ClockSelection); - /* Enable the PLLI2S when it's used as clock source for SAI */ - if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S) - { - plli2sused = 1U; - } - /* Enable the PLLSAI when it's used as clock source for SAI */ - if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI) - { - pllsaiused = 1U; - } - } - /*--------------------------------------------------------------------------*/ - - /*-------------------------- SAI2 configuration ----------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == (RCC_PERIPHCLK_SAI2)) - { - /* Check the parameters */ - assert_param(IS_RCC_SAI2CLKSOURCE(PeriphClkInit->Sai2ClockSelection)); - - /* Configure SAI2 Clock source */ - __HAL_RCC_SAI2_CONFIG(PeriphClkInit->Sai2ClockSelection); - - /* Enable the PLLI2S when it's used as clock source for SAI */ - if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S) - { - plli2sused = 1U; - } - /* Enable the PLLSAI when it's used as clock source for SAI */ - if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI) - { - pllsaiused = 1U; - } - } - /*--------------------------------------------------------------------------*/ - - /*----------------------------- RTC configuration --------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) - { - /* Check for RTC Parameters used to output RTCCLK */ - assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); - - /* Enable Power Clock*/ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Enable write access to Backup domain */ - PWR->CR |= PWR_CR_DBP; - - /* Get tick */ - tickstart = HAL_GetTick(); - - while((PWR->CR & PWR_CR_DBP) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ - tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL); - if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) - { - /* Store the content of BDCR register before the reset of Backup Domain */ - tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); - /* RTC Clock selection can be changed only if the Backup Domain is reset */ - __HAL_RCC_BACKUPRESET_FORCE(); - __HAL_RCC_BACKUPRESET_RELEASE(); - /* Restore the Content of BDCR register */ - RCC->BDCR = tmpreg1; - - /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ - if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON)) - { - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- TIM configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM)) - { - /* Configure Timer Prescaler */ - __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- FMPI2C1 Configuration -----------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FMPI2C1) == RCC_PERIPHCLK_FMPI2C1) - { - /* Check the parameters */ - assert_param(IS_RCC_FMPI2C1CLKSOURCE(PeriphClkInit->Fmpi2c1ClockSelection)); - - /* Configure the FMPI2C1 clock source */ - __HAL_RCC_FMPI2C1_CONFIG(PeriphClkInit->Fmpi2c1ClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*------------------------------ CEC Configuration -------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) - { - /* Check the parameters */ - assert_param(IS_RCC_CECCLKSOURCE(PeriphClkInit->CecClockSelection)); - - /* Configure the CEC clock source */ - __HAL_RCC_CEC_CONFIG(PeriphClkInit->CecClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*----------------------------- CLK48 Configuration ------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) - { - /* Check the parameters */ - assert_param(IS_RCC_CLK48CLKSOURCE(PeriphClkInit->Clk48ClockSelection)); - - /* Configure the CLK48 clock source */ - __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection); - - /* Enable the PLLSAI when it's used as clock source for CLK48 */ - if(PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLSAIP) - { - pllsaiused = 1U; - } - } - /*--------------------------------------------------------------------------*/ - - /*----------------------------- SDIO Configuration -------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDIO) == RCC_PERIPHCLK_SDIO) - { - /* Check the parameters */ - assert_param(IS_RCC_SDIOCLKSOURCE(PeriphClkInit->SdioClockSelection)); - - /* Configure the SDIO clock source */ - __HAL_RCC_SDIO_CONFIG(PeriphClkInit->SdioClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*------------------------------ SPDIFRX Configuration ---------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) - { - /* Check the parameters */ - assert_param(IS_RCC_SPDIFRXCLKSOURCE(PeriphClkInit->SpdifClockSelection)); - - /* Configure the SPDIFRX clock source */ - __HAL_RCC_SPDIFRX_CONFIG(PeriphClkInit->SpdifClockSelection); - /* Enable the PLLI2S when it's used as clock source for SPDIFRX */ - if(PeriphClkInit->SpdifClockSelection == RCC_SPDIFRXCLKSOURCE_PLLI2SP) - { - plli2sused = 1U; - } - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- PLLI2S Configuration ------------------------*/ - /* PLLI2S is configured when a peripheral will use it as source clock : SAI1, SAI2, I2S on APB1, - I2S on APB2 or SPDIFRX */ - if((plli2sused == 1U) || (PeriphClkInit->PeriphClockSelection == RCC_PERIPHCLK_PLLI2S)) - { - /* Disable the PLLI2S */ - __HAL_RCC_PLLI2S_DISABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /* check for common PLLI2S Parameters */ - assert_param(IS_RCC_PLLI2SM_VALUE(PeriphClkInit->PLLI2S.PLLI2SM)); - assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN)); - - /*------ In Case of PLLI2S is selected as source clock for I2S -----------*/ - if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == RCC_PERIPHCLK_I2S_APB1) && (PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S)) || - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == RCC_PERIPHCLK_I2S_APB2) && (PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S))) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - - /* Read PLLI2SP/PLLI2SQ value from PLLI2SCFGR register (this value is not needed for I2S configuration) */ - plli2sp = ((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> RCC_PLLI2SCFGR_PLLI2SP_Pos) + 1U) << 1U); - plli2sq = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */ - /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , plli2sp, plli2sq, PeriphClkInit->PLLI2S.PLLI2SR); - } - - /*------- In Case of PLLI2S is selected as source clock for SAI ----------*/ - if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S)) || - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S))) - { - /* Check for PLLI2S Parameters */ - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - /* Check for PLLI2S/DIVQ parameters */ - assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ)); - - /* Read PLLI2SP/PLLI2SR value from PLLI2SCFGR register (this value is not needed for SAI configuration) */ - plli2sp = ((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> RCC_PLLI2SCFGR_PLLI2SP_Pos) + 1U) << 1U); - plli2sr = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , plli2sp, PeriphClkInit->PLLI2S.PLLI2SQ, plli2sr); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */ - __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ); - } - - /*------ In Case of PLLI2S is selected as source clock for SPDIFRX -------*/ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) && (PeriphClkInit->SpdifClockSelection == RCC_SPDIFRXCLKSOURCE_PLLI2SP)) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLI2SP_VALUE(PeriphClkInit->PLLI2S.PLLI2SP)); - /* Read PLLI2SR value from PLLI2SCFGR register (this value is not need for SAI configuration) */ - plli2sq = ((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> RCC_PLLI2SCFGR_PLLI2SP_Pos) + 1U) << 1U); - plli2sr = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */ - /* SPDIFRXCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SP */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SP, plli2sq, plli2sr); - } - - /*----------------- In Case of PLLI2S is just selected -----------------*/ - if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S) - { - /* Check for Parameters */ - assert_param(IS_RCC_PLLI2SP_VALUE(PeriphClkInit->PLLI2S.PLLI2SP)); - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SP, PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR); - } - - /* Enable the PLLI2S */ - __HAL_RCC_PLLI2S_ENABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - /*--------------------------------------------------------------------------*/ - - /*----------------------------- PLLSAI Configuration -----------------------*/ - /* PLLSAI is configured when a peripheral will use it as source clock : SAI1, SAI2, CLK48 or SDIO */ - if(pllsaiused == 1U) - { - /* Disable PLLSAI Clock */ - __HAL_RCC_PLLSAI_DISABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLSAI is disabled */ - while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /* Check the PLLSAI division factors */ - assert_param(IS_RCC_PLLSAIM_VALUE(PeriphClkInit->PLLSAI.PLLSAIM)); - assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN)); - - /*------ In Case of PLLSAI is selected as source clock for SAI -----------*/ - if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI)) || - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI))) - { - /* check for PLLSAIQ Parameter */ - assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ)); - /* check for PLLSAI/DIVQ Parameter */ - assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ)); - - /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */ - pllsaip = ((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos) + 1U) << 1U); - /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ - /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ - /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */ - __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIM, PeriphClkInit->PLLSAI.PLLSAIN , pllsaip, PeriphClkInit->PLLSAI.PLLSAIQ, 0U); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */ - __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ); - } - - /*------ In Case of PLLSAI is selected as source clock for CLK48 ---------*/ - /* In Case of PLLI2S is selected as source clock for CLK48 */ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLSAIP)) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLSAIP_VALUE(PeriphClkInit->PLLSAI.PLLSAIP)); - /* Read PLLSAIQ value from PLLI2SCFGR register (this value is not need for SAI configuration) */ - pllsaiq = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); - /* Configure the PLLSAI division factors */ - /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) * (PLLI2SN/PLLSAIM) */ - /* 48CLK = f(PLLSAI clock output) = f(VCO clock) / PLLSAIP */ - __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIM, PeriphClkInit->PLLSAI.PLLSAIN , PeriphClkInit->PLLSAI.PLLSAIP, pllsaiq, 0U); - } - - /* Enable PLLSAI Clock */ - __HAL_RCC_PLLSAI_ENABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLSAI is ready */ - while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - return HAL_OK; -} - -/** - * @brief Get the RCC_PeriphCLKInitTypeDef according to the internal - * RCC configuration registers. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * will be configured. - * @retval None - */ -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tempreg; - - /* Set all possible values for the extended clock type parameter------------*/ - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S_APB1 | RCC_PERIPHCLK_I2S_APB2 |\ - RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 |\ - RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\ - RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_FMPI2C1 |\ - RCC_PERIPHCLK_CLK48 | RCC_PERIPHCLK_SDIO |\ - RCC_PERIPHCLK_SPDIFRX; - - /* Get the PLLI2S Clock configuration --------------------------------------*/ - PeriphClkInit->PLLI2S.PLLI2SM = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM) >> RCC_PLLI2SCFGR_PLLI2SM_Pos); - PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos); - PeriphClkInit->PLLI2S.PLLI2SP = (uint32_t)((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> RCC_PLLI2SCFGR_PLLI2SP_Pos) + 1U) << 1U); - PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); - PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); - /* Get the PLLSAI Clock configuration --------------------------------------*/ - PeriphClkInit->PLLSAI.PLLSAIM = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIM) >> RCC_PLLSAICFGR_PLLSAIM_Pos); - PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> RCC_PLLSAICFGR_PLLSAIN_Pos); - PeriphClkInit->PLLSAI.PLLSAIP = (uint32_t)((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos) + 1U) << 1U); - PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); - /* Get the PLLSAI/PLLI2S division factors ----------------------------------*/ - PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) >> RCC_DCKCFGR_PLLI2SDIVQ_Pos); - PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> RCC_DCKCFGR_PLLSAIDIVQ_Pos); - - /* Get the SAI1 clock configuration ----------------------------------------*/ - PeriphClkInit->Sai1ClockSelection = __HAL_RCC_GET_SAI1_SOURCE(); - - /* Get the SAI2 clock configuration ----------------------------------------*/ - PeriphClkInit->Sai2ClockSelection = __HAL_RCC_GET_SAI2_SOURCE(); - - /* Get the I2S APB1 clock configuration ------------------------------------*/ - PeriphClkInit->I2sApb1ClockSelection = __HAL_RCC_GET_I2S_APB1_SOURCE(); - - /* Get the I2S APB2 clock configuration ------------------------------------*/ - PeriphClkInit->I2sApb2ClockSelection = __HAL_RCC_GET_I2S_APB2_SOURCE(); - - /* Get the RTC Clock configuration -----------------------------------------*/ - tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE); - PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL)); - - /* Get the CEC clock configuration -----------------------------------------*/ - PeriphClkInit->CecClockSelection = __HAL_RCC_GET_CEC_SOURCE(); - - /* Get the FMPI2C1 clock configuration -------------------------------------*/ - PeriphClkInit->Fmpi2c1ClockSelection = __HAL_RCC_GET_FMPI2C1_SOURCE(); - - /* Get the CLK48 clock configuration ----------------------------------------*/ - PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE(); - - /* Get the SDIO clock configuration ----------------------------------------*/ - PeriphClkInit->SdioClockSelection = __HAL_RCC_GET_SDIO_SOURCE(); - - /* Get the SPDIFRX clock configuration -------------------------------------*/ - PeriphClkInit->SpdifClockSelection = __HAL_RCC_GET_SPDIFRX_SOURCE(); - - /* Get the TIM Prescaler configuration -------------------------------------*/ - if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET) - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; - } - else - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; - } -} - -/** - * @brief Return the peripheral clock frequency for a given peripheral(SAI..) - * @note Return 0 if peripheral clock identifier not managed by this API - * @param PeriphClk Peripheral clock identifier - * This parameter can be one of the following values: - * @arg RCC_PERIPHCLK_SAI1: SAI1 peripheral clock - * @arg RCC_PERIPHCLK_SAI2: SAI2 peripheral clock - * @arg RCC_PERIPHCLK_I2S_APB1: I2S APB1 peripheral clock - * @arg RCC_PERIPHCLK_I2S_APB2: I2S APB2 peripheral clock - * @retval Frequency in KHz - */ -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) -{ - uint32_t tmpreg1 = 0U; - /* This variable used to store the SAI clock frequency (value in Hz) */ - uint32_t frequency = 0U; - /* This variable used to store the VCO Input (value in Hz) */ - uint32_t vcoinput = 0U; - /* This variable used to store the SAI clock source */ - uint32_t saiclocksource = 0U; - uint32_t srcclk = 0U; - /* This variable used to store the VCO Output (value in Hz) */ - uint32_t vcooutput = 0U; - switch (PeriphClk) - { - case RCC_PERIPHCLK_SAI1: - case RCC_PERIPHCLK_SAI2: - { - saiclocksource = RCC->DCKCFGR; - saiclocksource &= (RCC_DCKCFGR_SAI1SRC | RCC_DCKCFGR_SAI2SRC); - switch (saiclocksource) - { - case 0U: /* PLLSAI is the clock source for SAI*/ - { - /* Configure the PLLSAI division factor */ - /* PLLSAI_VCO Input = PLL_SOURCE/PLLSAIM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI) - { - /* In Case the PLL Source is HSI (Internal Clock) */ - vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIM)); - } - else - { - /* In Case the PLL Source is HSE (External Clock) */ - vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIM))); - } - /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ - /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */ - tmpreg1 = (RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> 24U; - frequency = (vcoinput * ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> 6U))/(tmpreg1); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */ - tmpreg1 = (((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> 8U) + 1U); - frequency = frequency/(tmpreg1); - break; - } - case RCC_DCKCFGR_SAI1SRC_0: /* PLLI2S is the clock source for SAI*/ - case RCC_DCKCFGR_SAI2SRC_0: /* PLLI2S is the clock source for SAI*/ - { - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI) - { - /* In Case the PLL Source is HSI (Internal Clock) */ - vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - else - { - /* In Case the PLL Source is HSE (External Clock) */ - vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM))); - } - - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */ - tmpreg1 = (RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> 24U; - frequency = (vcoinput * ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U))/(tmpreg1); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */ - tmpreg1 = ((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) + 1U); - frequency = frequency/(tmpreg1); - break; - } - case RCC_DCKCFGR_SAI1SRC_1: /* PLLR is the clock source for SAI*/ - case RCC_DCKCFGR_SAI2SRC_1: /* PLLR is the clock source for SAI*/ - { - /* Configure the PLLI2S division factor */ - /* PLL_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI) - { - /* In Case the PLL Source is HSI (Internal Clock) */ - vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* In Case the PLL Source is HSE (External Clock) */ - vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM))); - } - - /* PLL_VCO Output = PLL_VCO Input * PLLN */ - /* SAI_CLK_x = PLL_VCO Output/PLLR */ - tmpreg1 = (RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U; - frequency = (vcoinput * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U))/(tmpreg1); - break; - } - case RCC_DCKCFGR_SAI1SRC: /* External clock is the clock source for SAI*/ - { - frequency = EXTERNAL_CLOCK_VALUE; - break; - } - case RCC_DCKCFGR_SAI2SRC: /* PLLSRC(HSE or HSI) is the clock source for SAI*/ - { - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI) - { - /* In Case the PLL Source is HSI (Internal Clock) */ - frequency = (uint32_t)(HSI_VALUE); - } - else - { - /* In Case the PLL Source is HSE (External Clock) */ - frequency = (uint32_t)(HSE_VALUE); - } - break; - } - default : - { - break; - } - } - break; - } - case RCC_PERIPHCLK_I2S_APB1: - { - /* Get the current I2S source */ - srcclk = __HAL_RCC_GET_I2S_APB1_SOURCE(); - switch (srcclk) - { - /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ - case RCC_I2SAPB1CLKSOURCE_EXT: - { - /* Set the I2S clock to the external clock value */ - frequency = EXTERNAL_CLOCK_VALUE; - break; - } - /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ - case RCC_I2SAPB1CLKSOURCE_PLLI2S: - { - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); - /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); - break; - } - /* Check if I2S clock selection is PLL VCO Output divided by PLLR used as I2S clock */ - case RCC_I2SAPB1CLKSOURCE_PLLR: - { - /* Configure the PLL division factor R */ - /* PLL_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - - /* PLL_VCO Output = PLL_VCO Input * PLLN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U) & (RCC_PLLCFGR_PLLN >> 6U))); - /* I2S_CLK = PLL_VCO Output/PLLR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U) & (RCC_PLLCFGR_PLLR >> 28U))); - break; - } - /* Check if I2S clock selection is HSI or HSE depending from PLL source Clock */ - case RCC_I2SAPB1CLKSOURCE_PLLSRC: - { - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - frequency = HSE_VALUE; - } - else - { - frequency = HSI_VALUE; - } - break; - } - /* Clock not enabled for I2S*/ - default: - { - frequency = 0U; - break; - } - } - break; - } - case RCC_PERIPHCLK_I2S_APB2: - { - /* Get the current I2S source */ - srcclk = __HAL_RCC_GET_I2S_APB2_SOURCE(); - switch (srcclk) - { - /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ - case RCC_I2SAPB2CLKSOURCE_EXT: - { - /* Set the I2S clock to the external clock value */ - frequency = EXTERNAL_CLOCK_VALUE; - break; - } - /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ - case RCC_I2SAPB2CLKSOURCE_PLLI2S: - { - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); - /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); - break; - } - /* Check if I2S clock selection is PLL VCO Output divided by PLLR used as I2S clock */ - case RCC_I2SAPB2CLKSOURCE_PLLR: - { - /* Configure the PLL division factor R */ - /* PLL_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - - /* PLL_VCO Output = PLL_VCO Input * PLLN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U) & (RCC_PLLCFGR_PLLN >> 6U))); - /* I2S_CLK = PLL_VCO Output/PLLR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U) & (RCC_PLLCFGR_PLLR >> 28U))); - break; - } - /* Check if I2S clock selection is HSI or HSE depending from PLL source Clock */ - case RCC_I2SAPB2CLKSOURCE_PLLSRC: - { - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - frequency = HSE_VALUE; - } - else - { - frequency = HSI_VALUE; - } - break; - } - /* Clock not enabled for I2S*/ - default: - { - frequency = 0U; - break; - } - } - break; - } - } - return frequency; -} -#endif /* STM32F446xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) -/** - * @brief Initializes the RCC extended peripherals clocks according to the specified - * parameters in the RCC_PeriphCLKInitTypeDef. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * contains the configuration information for the Extended Peripherals - * clocks(I2S, SAI, LTDC, RTC and TIM). - * - * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select - * the RTC clock source; in this case the Backup domain will be reset in - * order to modify the RTC Clock source, as consequence RTC registers (including - * the backup registers) and RCC_BDCR register are set to their reset values. - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tickstart = 0U; - uint32_t tmpreg1 = 0U; - uint32_t pllsaip = 0U; - uint32_t pllsaiq = 0U; - uint32_t pllsair = 0U; - - /* Check the parameters */ - assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); - - /*--------------------------- CLK48 Configuration --------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) - { - /* Check the parameters */ - assert_param(IS_RCC_CLK48CLKSOURCE(PeriphClkInit->Clk48ClockSelection)); - - /* Configure the CLK48 clock source */ - __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*------------------------------ SDIO Configuration ------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDIO) == RCC_PERIPHCLK_SDIO) - { - /* Check the parameters */ - assert_param(IS_RCC_SDIOCLKSOURCE(PeriphClkInit->SdioClockSelection)); - - /* Configure the SDIO clock source */ - __HAL_RCC_SDIO_CONFIG(PeriphClkInit->SdioClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*----------------------- SAI/I2S Configuration (PLLI2S) -------------------*/ - /*------------------- Common configuration SAI/I2S -------------------------*/ - /* In Case of SAI or I2S Clock Configuration through PLLI2S, PLLI2SN division - factor is common parameters for both peripherals */ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || - (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == RCC_PERIPHCLK_SAI_PLLI2S) || - (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S)) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN)); - - /* Disable the PLLI2S */ - __HAL_RCC_PLLI2S_DISABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /*---------------------- I2S configuration -------------------------------*/ - /* In Case of I2S Clock Configuration through PLLI2S, PLLI2SR must be added - only for I2S configuration */ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S)) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x (PLLI2SN/PLLM) */ - /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SR); - } - - /*---------------------------- SAI configuration -------------------------*/ - /* In Case of SAI Clock Configuration through PLLI2S, PLLI2SQ and PLLI2S_DIVQ must - be added only for SAI configuration */ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == (RCC_PERIPHCLK_SAI_PLLI2S)) - { - /* Check the PLLI2S division factors */ - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ)); - - /* Read PLLI2SR value from PLLI2SCFGR register (this value is not need for SAI configuration) */ - tmpreg1 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */ - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */ - __HAL_RCC_PLLI2S_SAICLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ , tmpreg1); - /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */ - __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ); - } - - /*----------------- In Case of PLLI2S is just selected -----------------*/ - if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S) - { - /* Check for Parameters */ - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - - /* Configure the PLLI2S multiplication and division factors */ - __HAL_RCC_PLLI2S_SAICLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN, PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR); - } - - /* Enable the PLLI2S */ - __HAL_RCC_PLLI2S_ENABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - /*--------------------------------------------------------------------------*/ - - /*----------------------- SAI/LTDC Configuration (PLLSAI) ------------------*/ - /*----------------------- Common configuration SAI/LTDC --------------------*/ - /* In Case of SAI, LTDC or CLK48 Clock Configuration through PLLSAI, PLLSAIN division - factor is common parameters for these peripherals */ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == RCC_PERIPHCLK_SAI_PLLSAI) || - (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC) || - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) && - (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLSAIP))) - { - /* Check the PLLSAI division factors */ - assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN)); - - /* Disable PLLSAI Clock */ - __HAL_RCC_PLLSAI_DISABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLSAI is disabled */ - while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /*---------------------------- SAI configuration -------------------------*/ - /* In Case of SAI Clock Configuration through PLLSAI, PLLSAIQ and PLLSAI_DIVQ must - be added only for SAI configuration */ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == (RCC_PERIPHCLK_SAI_PLLSAI)) - { - assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ)); - assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ)); - - /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */ - pllsaip = ((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos) + 1U) << 1U); - /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */ - pllsair = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> RCC_PLLSAICFGR_PLLSAIR_Pos); - /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ - /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ - /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */ - __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN, pllsaip, PeriphClkInit->PLLSAI.PLLSAIQ, pllsair); - /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */ - __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ); - } - - /*---------------------------- LTDC configuration ------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == (RCC_PERIPHCLK_LTDC)) - { - assert_param(IS_RCC_PLLSAIR_VALUE(PeriphClkInit->PLLSAI.PLLSAIR)); - assert_param(IS_RCC_PLLSAI_DIVR_VALUE(PeriphClkInit->PLLSAIDivR)); - - /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */ - pllsaip = ((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos) + 1U) << 1U); - /* Read PLLSAIQ value from PLLSAICFGR register (this value is not need for SAI configuration) */ - pllsaiq = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); - /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ - /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ - /* LTDC_CLK(first level) = PLLSAI_VCO Output/PLLSAIR */ - __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN, pllsaip, pllsaiq, PeriphClkInit->PLLSAI.PLLSAIR); - /* LTDC_CLK = LTDC_CLK(first level)/PLLSAIDIVR */ - __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLSAIDivR); - } - - /*---------------------------- CLK48 configuration ------------------------*/ - /* Configure the PLLSAI when it is used as clock source for CLK48 */ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == (RCC_PERIPHCLK_CLK48)) && - (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLSAIP)) - { - assert_param(IS_RCC_PLLSAIP_VALUE(PeriphClkInit->PLLSAI.PLLSAIP)); - - /* Read PLLSAIQ value from PLLSAICFGR register (this value is not need for SAI configuration) */ - pllsaiq = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); - /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */ - pllsair = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> RCC_PLLSAICFGR_PLLSAIR_Pos); - /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ - /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ - /* CLK48_CLK(first level) = PLLSAI_VCO Output/PLLSAIP */ - __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN, PeriphClkInit->PLLSAI.PLLSAIP, pllsaiq, pllsair); - } - - /* Enable PLLSAI Clock */ - __HAL_RCC_PLLSAI_ENABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLSAI is ready */ - while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - - /*--------------------------------------------------------------------------*/ - - /*---------------------------- RTC configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) - { - /* Check for RTC Parameters used to output RTCCLK */ - assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); - - /* Enable Power Clock*/ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Enable write access to Backup domain */ - PWR->CR |= PWR_CR_DBP; - - /* Get tick */ - tickstart = HAL_GetTick(); - - while((PWR->CR & PWR_CR_DBP) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ - tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL); - if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) - { - /* Store the content of BDCR register before the reset of Backup Domain */ - tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); - /* RTC Clock selection can be changed only if the Backup Domain is reset */ - __HAL_RCC_BACKUPRESET_FORCE(); - __HAL_RCC_BACKUPRESET_RELEASE(); - /* Restore the Content of BDCR register */ - RCC->BDCR = tmpreg1; - - /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ - if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON)) - { - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- TIM configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM)) - { - __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); - } - return HAL_OK; -} - -/** - * @brief Configures the RCC_PeriphCLKInitTypeDef according to the internal - * RCC configuration registers. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * will be configured. - * @retval None - */ -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tempreg; - - /* Set all possible values for the extended clock type parameter------------*/ - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_SAI_PLLSAI |\ - RCC_PERIPHCLK_SAI_PLLI2S | RCC_PERIPHCLK_LTDC |\ - RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\ - RCC_PERIPHCLK_CLK48 | RCC_PERIPHCLK_SDIO; - - /* Get the PLLI2S Clock configuration --------------------------------------*/ - PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos); - PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); - PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); - /* Get the PLLSAI Clock configuration --------------------------------------*/ - PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> RCC_PLLSAICFGR_PLLSAIN_Pos); - PeriphClkInit->PLLSAI.PLLSAIR = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> RCC_PLLSAICFGR_PLLSAIR_Pos); - PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); - /* Get the PLLSAI/PLLI2S division factors ----------------------------------*/ - PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) >> RCC_DCKCFGR_PLLI2SDIVQ_Pos); - PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> RCC_DCKCFGR_PLLSAIDIVQ_Pos); - PeriphClkInit->PLLSAIDivR = (uint32_t)(RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVR); - /* Get the RTC Clock configuration -----------------------------------------*/ - tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE); - PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL)); - - /* Get the CLK48 clock configuration -------------------------------------*/ - PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE(); - - /* Get the SDIO clock configuration ----------------------------------------*/ - PeriphClkInit->SdioClockSelection = __HAL_RCC_GET_SDIO_SOURCE(); - - if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET) - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; - } - else - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; - } -} - -/** - * @brief Return the peripheral clock frequency for a given peripheral(SAI..) - * @note Return 0 if peripheral clock identifier not managed by this API - * @param PeriphClk Peripheral clock identifier - * This parameter can be one of the following values: - * @arg RCC_PERIPHCLK_I2S: I2S peripheral clock - * @retval Frequency in KHz - */ -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) -{ - /* This variable used to store the I2S clock frequency (value in Hz) */ - uint32_t frequency = 0U; - /* This variable used to store the VCO Input (value in Hz) */ - uint32_t vcoinput = 0U; - uint32_t srcclk = 0U; - /* This variable used to store the VCO Output (value in Hz) */ - uint32_t vcooutput = 0U; - switch (PeriphClk) - { - case RCC_PERIPHCLK_I2S: - { - /* Get the current I2S source */ - srcclk = __HAL_RCC_GET_I2S_SOURCE(); - switch (srcclk) - { - /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ - case RCC_I2SCLKSOURCE_EXT: - { - /* Set the I2S clock to the external clock value */ - frequency = EXTERNAL_CLOCK_VALUE; - break; - } - /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ - case RCC_I2SCLKSOURCE_PLLI2S: - { - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); - /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); - break; - } - /* Clock not enabled for I2S*/ - default: - { - frequency = 0U; - break; - } - } - break; - } - } - return frequency; -} -#endif /* STM32F469xx || STM32F479xx */ - -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief Initializes the RCC extended peripherals clocks according to the specified - * parameters in the RCC_PeriphCLKInitTypeDef. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * contains the configuration information for the Extended Peripherals - * clocks(I2S, LTDC RTC and TIM). - * - * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select - * the RTC clock source; in this case the Backup domain will be reset in - * order to modify the RTC Clock source, as consequence RTC registers (including - * the backup registers) and RCC_BDCR register are set to their reset values. - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tickstart = 0U; - uint32_t tmpreg1 = 0U; -#if defined(STM32F413xx) || defined(STM32F423xx) - uint32_t plli2sq = 0U; -#endif /* STM32F413xx || STM32F423xx */ - uint32_t plli2sused = 0U; - - /* Check the peripheral clock selection parameters */ - assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); - - /*----------------------------------- I2S APB1 configuration ---------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == (RCC_PERIPHCLK_I2S_APB1)) - { - /* Check the parameters */ - assert_param(IS_RCC_I2SAPB1CLKSOURCE(PeriphClkInit->I2sApb1ClockSelection)); - - /* Configure I2S Clock source */ - __HAL_RCC_I2S_APB1_CONFIG(PeriphClkInit->I2sApb1ClockSelection); - /* Enable the PLLI2S when it's used as clock source for I2S */ - if(PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S) - { - plli2sused = 1U; - } - } - /*--------------------------------------------------------------------------*/ - - /*----------------------------------- I2S APB2 configuration ---------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == (RCC_PERIPHCLK_I2S_APB2)) - { - /* Check the parameters */ - assert_param(IS_RCC_I2SAPB2CLKSOURCE(PeriphClkInit->I2sApb2ClockSelection)); - - /* Configure I2S Clock source */ - __HAL_RCC_I2S_APB2_CONFIG(PeriphClkInit->I2sApb2ClockSelection); - /* Enable the PLLI2S when it's used as clock source for I2S */ - if(PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S) - { - plli2sused = 1U; - } - } - /*--------------------------------------------------------------------------*/ - -#if defined(STM32F413xx) || defined(STM32F423xx) - /*----------------------- SAI1 Block A configuration -----------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAIA) == (RCC_PERIPHCLK_SAIA)) - { - /* Check the parameters */ - assert_param(IS_RCC_SAIACLKSOURCE(PeriphClkInit->SaiAClockSelection)); - - /* Configure SAI1 Clock source */ - __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(PeriphClkInit->SaiAClockSelection); - /* Enable the PLLI2S when it's used as clock source for SAI */ - if(PeriphClkInit->SaiAClockSelection == RCC_SAIACLKSOURCE_PLLI2SR) - { - plli2sused = 1U; - } - /* Enable the PLLSAI when it's used as clock source for SAI */ - if(PeriphClkInit->SaiAClockSelection == RCC_SAIACLKSOURCE_PLLR) - { - /* Check for PLL/DIVR parameters */ - assert_param(IS_RCC_PLL_DIVR_VALUE(PeriphClkInit->PLLDivR)); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLDIVR */ - __HAL_RCC_PLL_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLDivR); - } - } - /*--------------------------------------------------------------------------*/ - - /*---------------------- SAI1 Block B configuration ------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAIB) == (RCC_PERIPHCLK_SAIB)) - { - /* Check the parameters */ - assert_param(IS_RCC_SAIBCLKSOURCE(PeriphClkInit->SaiBClockSelection)); - - /* Configure SAI1 Clock source */ - __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG(PeriphClkInit->SaiBClockSelection); - /* Enable the PLLI2S when it's used as clock source for SAI */ - if(PeriphClkInit->SaiBClockSelection == RCC_SAIBCLKSOURCE_PLLI2SR) - { - plli2sused = 1U; - } - /* Enable the PLLSAI when it's used as clock source for SAI */ - if(PeriphClkInit->SaiBClockSelection == RCC_SAIBCLKSOURCE_PLLR) - { - /* Check for PLL/DIVR parameters */ - assert_param(IS_RCC_PLL_DIVR_VALUE(PeriphClkInit->PLLDivR)); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLDIVR */ - __HAL_RCC_PLL_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLDivR); - } - } - /*--------------------------------------------------------------------------*/ -#endif /* STM32F413xx || STM32F423xx */ - - /*------------------------------------ RTC configuration -------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) - { - /* Check for RTC Parameters used to output RTCCLK */ - assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); - - /* Enable Power Clock*/ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Enable write access to Backup domain */ - PWR->CR |= PWR_CR_DBP; - - /* Get tick */ - tickstart = HAL_GetTick(); - - while((PWR->CR & PWR_CR_DBP) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ - tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL); - if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) - { - /* Store the content of BDCR register before the reset of Backup Domain */ - tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); - /* RTC Clock selection can be changed only if the Backup Domain is reset */ - __HAL_RCC_BACKUPRESET_FORCE(); - __HAL_RCC_BACKUPRESET_RELEASE(); - /* Restore the Content of BDCR register */ - RCC->BDCR = tmpreg1; - - /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ - if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON)) - { - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*------------------------------------ TIM configuration -------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM)) - { - /* Configure Timer Prescaler */ - __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); - } - /*--------------------------------------------------------------------------*/ - - /*------------------------------------- FMPI2C1 Configuration --------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FMPI2C1) == RCC_PERIPHCLK_FMPI2C1) - { - /* Check the parameters */ - assert_param(IS_RCC_FMPI2C1CLKSOURCE(PeriphClkInit->Fmpi2c1ClockSelection)); - - /* Configure the FMPI2C1 clock source */ - __HAL_RCC_FMPI2C1_CONFIG(PeriphClkInit->Fmpi2c1ClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*------------------------------------- CLK48 Configuration ----------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) - { - /* Check the parameters */ - assert_param(IS_RCC_CLK48CLKSOURCE(PeriphClkInit->Clk48ClockSelection)); - - /* Configure the SDIO clock source */ - __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection); - - /* Enable the PLLI2S when it's used as clock source for CLK48 */ - if(PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLI2SQ) - { - plli2sused = 1U; - } - } - /*--------------------------------------------------------------------------*/ - - /*------------------------------------- SDIO Configuration -----------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDIO) == RCC_PERIPHCLK_SDIO) - { - /* Check the parameters */ - assert_param(IS_RCC_SDIOCLKSOURCE(PeriphClkInit->SdioClockSelection)); - - /* Configure the SDIO clock source */ - __HAL_RCC_SDIO_CONFIG(PeriphClkInit->SdioClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*-------------------------------------- PLLI2S Configuration --------------*/ - /* PLLI2S is configured when a peripheral will use it as source clock : I2S on APB1 or - I2S on APB2*/ - if((plli2sused == 1U) || (PeriphClkInit->PeriphClockSelection == RCC_PERIPHCLK_PLLI2S)) - { - /* Disable the PLLI2S */ - __HAL_RCC_PLLI2S_DISABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /* check for common PLLI2S Parameters */ - assert_param(IS_RCC_PLLI2SCLKSOURCE(PeriphClkInit->PLLI2SSelection)); - assert_param(IS_RCC_PLLI2SM_VALUE(PeriphClkInit->PLLI2S.PLLI2SM)); - assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN)); - /*-------------------- Set the PLL I2S clock -----------------------------*/ - __HAL_RCC_PLL_I2S_CONFIG(PeriphClkInit->PLLI2SSelection); - - /*------- In Case of PLLI2S is selected as source clock for I2S ----------*/ - if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == RCC_PERIPHCLK_I2S_APB1) && (PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S)) || - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == RCC_PERIPHCLK_I2S_APB2) && (PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S)) || - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLI2SQ)) || - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDIO) == RCC_PERIPHCLK_SDIO) && (PeriphClkInit->SdioClockSelection == RCC_SDIOCLKSOURCE_CLK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLI2SQ))) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM)*/ - /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR); - } - -#if defined(STM32F413xx) || defined(STM32F423xx) - /*------- In Case of PLLI2S is selected as source clock for SAI ----------*/ - if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAIA) == RCC_PERIPHCLK_SAIA) && (PeriphClkInit->SaiAClockSelection == RCC_SAIACLKSOURCE_PLLI2SR)) || - ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAIB) == RCC_PERIPHCLK_SAIB) && (PeriphClkInit->SaiBClockSelection == RCC_SAIBCLKSOURCE_PLLI2SR))) - { - /* Check for PLLI2S Parameters */ - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - /* Check for PLLI2S/DIVR parameters */ - assert_param(IS_RCC_PLLI2S_DIVR_VALUE(PeriphClkInit->PLLI2SDivR)); - - /* Read PLLI2SQ value from PLLI2SCFGR register (this value is not needed for SAI configuration) */ - plli2sq = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN, plli2sq, PeriphClkInit->PLLI2S.PLLI2SR); - - /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVR */ - __HAL_RCC_PLLI2S_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLI2SDivR); - } -#endif /* STM32F413xx || STM32F423xx */ - - /*----------------- In Case of PLLI2S is just selected ------------------*/ - if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S) - { - /* Check for Parameters */ - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM)*/ - /* SPDIFRXCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SP */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR); - } - - /* Enable the PLLI2S */ - __HAL_RCC_PLLI2S_ENABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - /*--------------------------------------------------------------------------*/ - - /*-------------------- DFSDM1 clock source configuration -------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1) - { - /* Check the parameters */ - assert_param(IS_RCC_DFSDM1CLKSOURCE(PeriphClkInit->Dfsdm1ClockSelection)); - - /* Configure the DFSDM1 interface clock source */ - __HAL_RCC_DFSDM1_CONFIG(PeriphClkInit->Dfsdm1ClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*-------------------- DFSDM1 Audio clock source configuration -------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1_AUDIO) == RCC_PERIPHCLK_DFSDM1_AUDIO) - { - /* Check the parameters */ - assert_param(IS_RCC_DFSDM1AUDIOCLKSOURCE(PeriphClkInit->Dfsdm1AudioClockSelection)); - - /* Configure the DFSDM1 Audio interface clock source */ - __HAL_RCC_DFSDM1AUDIO_CONFIG(PeriphClkInit->Dfsdm1AudioClockSelection); - } - /*--------------------------------------------------------------------------*/ - -#if defined(STM32F413xx) || defined(STM32F423xx) - /*-------------------- DFSDM2 clock source configuration -------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM2) == RCC_PERIPHCLK_DFSDM2) - { - /* Check the parameters */ - assert_param(IS_RCC_DFSDM2CLKSOURCE(PeriphClkInit->Dfsdm2ClockSelection)); - - /* Configure the DFSDM1 interface clock source */ - __HAL_RCC_DFSDM2_CONFIG(PeriphClkInit->Dfsdm2ClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*-------------------- DFSDM2 Audio clock source configuration -------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM2_AUDIO) == RCC_PERIPHCLK_DFSDM2_AUDIO) - { - /* Check the parameters */ - assert_param(IS_RCC_DFSDM2AUDIOCLKSOURCE(PeriphClkInit->Dfsdm2AudioClockSelection)); - - /* Configure the DFSDM1 Audio interface clock source */ - __HAL_RCC_DFSDM2AUDIO_CONFIG(PeriphClkInit->Dfsdm2AudioClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- LPTIM1 Configuration ------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) - { - /* Check the parameters */ - assert_param(IS_RCC_LPTIM1CLKSOURCE(PeriphClkInit->Lptim1ClockSelection)); - - /* Configure the LPTIM1 clock source */ - __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection); - } - /*--------------------------------------------------------------------------*/ -#endif /* STM32F413xx || STM32F423xx */ - - return HAL_OK; -} - -/** - * @brief Get the RCC_PeriphCLKInitTypeDef according to the internal - * RCC configuration registers. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * will be configured. - * @retval None - */ -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tempreg; - - /* Set all possible values for the extended clock type parameter------------*/ -#if defined(STM32F413xx) || defined(STM32F423xx) - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S_APB1 | RCC_PERIPHCLK_I2S_APB2 |\ - RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\ - RCC_PERIPHCLK_FMPI2C1 | RCC_PERIPHCLK_CLK48 |\ - RCC_PERIPHCLK_SDIO | RCC_PERIPHCLK_DFSDM1 |\ - RCC_PERIPHCLK_DFSDM1_AUDIO | RCC_PERIPHCLK_DFSDM2 |\ - RCC_PERIPHCLK_DFSDM2_AUDIO | RCC_PERIPHCLK_LPTIM1 |\ - RCC_PERIPHCLK_SAIA | RCC_PERIPHCLK_SAIB; -#else /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S_APB1 | RCC_PERIPHCLK_I2S_APB2 |\ - RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\ - RCC_PERIPHCLK_FMPI2C1 | RCC_PERIPHCLK_CLK48 |\ - RCC_PERIPHCLK_SDIO | RCC_PERIPHCLK_DFSDM1 |\ - RCC_PERIPHCLK_DFSDM1_AUDIO; -#endif /* STM32F413xx || STM32F423xx */ - - - - /* Get the PLLI2S Clock configuration --------------------------------------*/ - PeriphClkInit->PLLI2S.PLLI2SM = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM) >> RCC_PLLI2SCFGR_PLLI2SM_Pos); - PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos); - PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); - PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); -#if defined(STM32F413xx) || defined(STM32F423xx) - /* Get the PLL/PLLI2S division factors -------------------------------------*/ - PeriphClkInit->PLLI2SDivR = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVR) >> RCC_DCKCFGR_PLLI2SDIVR_Pos); - PeriphClkInit->PLLDivR = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLDIVR) >> RCC_DCKCFGR_PLLDIVR_Pos); -#endif /* STM32F413xx || STM32F423xx */ - - /* Get the I2S APB1 clock configuration ------------------------------------*/ - PeriphClkInit->I2sApb1ClockSelection = __HAL_RCC_GET_I2S_APB1_SOURCE(); - - /* Get the I2S APB2 clock configuration ------------------------------------*/ - PeriphClkInit->I2sApb2ClockSelection = __HAL_RCC_GET_I2S_APB2_SOURCE(); - - /* Get the RTC Clock configuration -----------------------------------------*/ - tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE); - PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL)); - - /* Get the FMPI2C1 clock configuration -------------------------------------*/ - PeriphClkInit->Fmpi2c1ClockSelection = __HAL_RCC_GET_FMPI2C1_SOURCE(); - - /* Get the CLK48 clock configuration ---------------------------------------*/ - PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE(); - - /* Get the SDIO clock configuration ----------------------------------------*/ - PeriphClkInit->SdioClockSelection = __HAL_RCC_GET_SDIO_SOURCE(); - - /* Get the DFSDM1 clock configuration --------------------------------------*/ - PeriphClkInit->Dfsdm1ClockSelection = __HAL_RCC_GET_DFSDM1_SOURCE(); - - /* Get the DFSDM1 Audio clock configuration --------------------------------*/ - PeriphClkInit->Dfsdm1AudioClockSelection = __HAL_RCC_GET_DFSDM1AUDIO_SOURCE(); - -#if defined(STM32F413xx) || defined(STM32F423xx) - /* Get the DFSDM2 clock configuration --------------------------------------*/ - PeriphClkInit->Dfsdm2ClockSelection = __HAL_RCC_GET_DFSDM2_SOURCE(); - - /* Get the DFSDM2 Audio clock configuration --------------------------------*/ - PeriphClkInit->Dfsdm2AudioClockSelection = __HAL_RCC_GET_DFSDM2AUDIO_SOURCE(); - - /* Get the LPTIM1 clock configuration --------------------------------------*/ - PeriphClkInit->Lptim1ClockSelection = __HAL_RCC_GET_LPTIM1_SOURCE(); - - /* Get the SAI1 Block Aclock configuration ---------------------------------*/ - PeriphClkInit->SaiAClockSelection = __HAL_RCC_GET_SAI_BLOCKA_SOURCE(); - - /* Get the SAI1 Block B clock configuration --------------------------------*/ - PeriphClkInit->SaiBClockSelection = __HAL_RCC_GET_SAI_BLOCKB_SOURCE(); -#endif /* STM32F413xx || STM32F423xx */ - - /* Get the TIM Prescaler configuration -------------------------------------*/ - if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET) - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; - } - else - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; - } -} - -/** - * @brief Return the peripheral clock frequency for a given peripheral(I2S..) - * @note Return 0 if peripheral clock identifier not managed by this API - * @param PeriphClk Peripheral clock identifier - * This parameter can be one of the following values: - * @arg RCC_PERIPHCLK_I2S_APB1: I2S APB1 peripheral clock - * @arg RCC_PERIPHCLK_I2S_APB2: I2S APB2 peripheral clock - * @retval Frequency in KHz - */ -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) -{ - /* This variable used to store the I2S clock frequency (value in Hz) */ - uint32_t frequency = 0U; - /* This variable used to store the VCO Input (value in Hz) */ - uint32_t vcoinput = 0U; - uint32_t srcclk = 0U; - /* This variable used to store the VCO Output (value in Hz) */ - uint32_t vcooutput = 0U; - switch (PeriphClk) - { - case RCC_PERIPHCLK_I2S_APB1: - { - /* Get the current I2S source */ - srcclk = __HAL_RCC_GET_I2S_APB1_SOURCE(); - switch (srcclk) - { - /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ - case RCC_I2SAPB1CLKSOURCE_EXT: - { - /* Set the I2S clock to the external clock value */ - frequency = EXTERNAL_CLOCK_VALUE; - break; - } - /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ - case RCC_I2SAPB1CLKSOURCE_PLLI2S: - { - if((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SSRC) == RCC_PLLI2SCFGR_PLLI2SSRC) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(EXTERNAL_CLOCK_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - else - { - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - } - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); - /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); - break; - } - /* Check if I2S clock selection is PLL VCO Output divided by PLLR used as I2S clock */ - case RCC_I2SAPB1CLKSOURCE_PLLR: - { - /* Configure the PLL division factor R */ - /* PLL_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - - /* PLL_VCO Output = PLL_VCO Input * PLLN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U) & (RCC_PLLCFGR_PLLN >> 6U))); - /* I2S_CLK = PLL_VCO Output/PLLR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U) & (RCC_PLLCFGR_PLLR >> 28U))); - break; - } - /* Check if I2S clock selection is HSI or HSE depending from PLL source Clock */ - case RCC_I2SAPB1CLKSOURCE_PLLSRC: - { - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - frequency = HSE_VALUE; - } - else - { - frequency = HSI_VALUE; - } - break; - } - /* Clock not enabled for I2S*/ - default: - { - frequency = 0U; - break; - } - } - break; - } - case RCC_PERIPHCLK_I2S_APB2: - { - /* Get the current I2S source */ - srcclk = __HAL_RCC_GET_I2S_APB2_SOURCE(); - switch (srcclk) - { - /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ - case RCC_I2SAPB2CLKSOURCE_EXT: - { - /* Set the I2S clock to the external clock value */ - frequency = EXTERNAL_CLOCK_VALUE; - break; - } - /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ - case RCC_I2SAPB2CLKSOURCE_PLLI2S: - { - if((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SSRC) == RCC_PLLI2SCFGR_PLLI2SSRC) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(EXTERNAL_CLOCK_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - else - { - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - } - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); - /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); - break; - } - /* Check if I2S clock selection is PLL VCO Output divided by PLLR used as I2S clock */ - case RCC_I2SAPB2CLKSOURCE_PLLR: - { - /* Configure the PLL division factor R */ - /* PLL_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - - /* PLL_VCO Output = PLL_VCO Input * PLLN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U) & (RCC_PLLCFGR_PLLN >> 6U))); - /* I2S_CLK = PLL_VCO Output/PLLR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U) & (RCC_PLLCFGR_PLLR >> 28U))); - break; - } - /* Check if I2S clock selection is HSI or HSE depending from PLL source Clock */ - case RCC_I2SAPB2CLKSOURCE_PLLSRC: - { - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - frequency = HSE_VALUE; - } - else - { - frequency = HSI_VALUE; - } - break; - } - /* Clock not enabled for I2S*/ - default: - { - frequency = 0U; - break; - } - } - break; - } - } - return frequency; -} -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -/** - * @brief Initializes the RCC extended peripherals clocks according to the specified parameters in the - * RCC_PeriphCLKInitTypeDef. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * contains the configuration information for the Extended Peripherals clocks(I2S and RTC clocks). - * - * @note A caution to be taken when HAL_RCCEx_PeriphCLKConfig() is used to select RTC clock selection, in this case - * the Reset of Backup domain will be applied in order to modify the RTC Clock source as consequence all backup - * domain (RTC and RCC_BDCR register expect BKPSRAM) will be reset - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tickstart = 0U; - uint32_t tmpreg1 = 0U; - - /* Check the parameters */ - assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); - - /*---------------------------- RTC configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) - { - /* Check for RTC Parameters used to output RTCCLK */ - assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); - - /* Enable Power Clock*/ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Enable write access to Backup domain */ - PWR->CR |= PWR_CR_DBP; - - /* Get tick */ - tickstart = HAL_GetTick(); - - while((PWR->CR & PWR_CR_DBP) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ - tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL); - if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) - { - /* Store the content of BDCR register before the reset of Backup Domain */ - tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); - /* RTC Clock selection can be changed only if the Backup Domain is reset */ - __HAL_RCC_BACKUPRESET_FORCE(); - __HAL_RCC_BACKUPRESET_RELEASE(); - /* Restore the Content of BDCR register */ - RCC->BDCR = tmpreg1; - - /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ - if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON)) - { - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- TIM configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM)) - { - __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- FMPI2C1 Configuration -----------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FMPI2C1) == RCC_PERIPHCLK_FMPI2C1) - { - /* Check the parameters */ - assert_param(IS_RCC_FMPI2C1CLKSOURCE(PeriphClkInit->Fmpi2c1ClockSelection)); - - /* Configure the FMPI2C1 clock source */ - __HAL_RCC_FMPI2C1_CONFIG(PeriphClkInit->Fmpi2c1ClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- LPTIM1 Configuration ------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) - { - /* Check the parameters */ - assert_param(IS_RCC_LPTIM1CLKSOURCE(PeriphClkInit->Lptim1ClockSelection)); - - /* Configure the LPTIM1 clock source */ - __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection); - } - - /*---------------------------- I2S Configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) - { - /* Check the parameters */ - assert_param(IS_RCC_I2SAPBCLKSOURCE(PeriphClkInit->I2SClockSelection)); - - /* Configure the I2S clock source */ - __HAL_RCC_I2S_CONFIG(PeriphClkInit->I2SClockSelection); - } - - return HAL_OK; -} - -/** - * @brief Configures the RCC_OscInitStruct according to the internal - * RCC configuration registers. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * will be configured. - * @retval None - */ -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tempreg; - - /* Set all possible values for the extended clock type parameter------------*/ - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_FMPI2C1 | RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC; - - tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE); - PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL)); - - if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET) - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; - } - else - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; - } - /* Get the FMPI2C1 clock configuration -------------------------------------*/ - PeriphClkInit->Fmpi2c1ClockSelection = __HAL_RCC_GET_FMPI2C1_SOURCE(); - - /* Get the I2S clock configuration -----------------------------------------*/ - PeriphClkInit->I2SClockSelection = __HAL_RCC_GET_I2S_SOURCE(); - - -} -/** - * @brief Return the peripheral clock frequency for a given peripheral(SAI..) - * @note Return 0 if peripheral clock identifier not managed by this API - * @param PeriphClk Peripheral clock identifier - * This parameter can be one of the following values: - * @arg RCC_PERIPHCLK_I2S: I2S peripheral clock - * @retval Frequency in KHz - */ -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) -{ - /* This variable used to store the I2S clock frequency (value in Hz) */ - uint32_t frequency = 0U; - /* This variable used to store the VCO Input (value in Hz) */ - uint32_t vcoinput = 0U; - uint32_t srcclk = 0U; - /* This variable used to store the VCO Output (value in Hz) */ - uint32_t vcooutput = 0U; - switch (PeriphClk) - { - case RCC_PERIPHCLK_I2S: - { - /* Get the current I2S source */ - srcclk = __HAL_RCC_GET_I2S_SOURCE(); - switch (srcclk) - { - /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ - case RCC_I2SAPBCLKSOURCE_EXT: - { - /* Set the I2S clock to the external clock value */ - frequency = EXTERNAL_CLOCK_VALUE; - break; - } - /* Check if I2S clock selection is PLL VCO Output divided by PLLR used as I2S clock */ - case RCC_I2SAPBCLKSOURCE_PLLR: - { - /* Configure the PLL division factor R */ - /* PLL_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - - /* PLL_VCO Output = PLL_VCO Input * PLLN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U) & (RCC_PLLCFGR_PLLN >> 6U))); - /* I2S_CLK = PLL_VCO Output/PLLR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U) & (RCC_PLLCFGR_PLLR >> 28U))); - break; - } - /* Check if I2S clock selection is HSI or HSE depending from PLL source Clock */ - case RCC_I2SAPBCLKSOURCE_PLLSRC: - { - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - frequency = HSE_VALUE; - } - else - { - frequency = HSI_VALUE; - } - break; - } - /* Clock not enabled for I2S*/ - default: - { - frequency = 0U; - break; - } - } - break; - } - } - return frequency; -} -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) -/** - * @brief Initializes the RCC extended peripherals clocks according to the specified - * parameters in the RCC_PeriphCLKInitTypeDef. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * contains the configuration information for the Extended Peripherals - * clocks(I2S, SAI, LTDC RTC and TIM). - * - * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select - * the RTC clock source; in this case the Backup domain will be reset in - * order to modify the RTC Clock source, as consequence RTC registers (including - * the backup registers) and RCC_BDCR register are set to their reset values. - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tickstart = 0U; - uint32_t tmpreg1 = 0U; - - /* Check the parameters */ - assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); - - /*----------------------- SAI/I2S Configuration (PLLI2S) -------------------*/ - /*----------------------- Common configuration SAI/I2S ---------------------*/ - /* In Case of SAI or I2S Clock Configuration through PLLI2S, PLLI2SN division - factor is common parameters for both peripherals */ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || - (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == RCC_PERIPHCLK_SAI_PLLI2S) || - (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S)) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN)); - - /* Disable the PLLI2S */ - __HAL_RCC_PLLI2S_DISABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /*---------------------------- I2S configuration -------------------------*/ - /* In Case of I2S Clock Configuration through PLLI2S, PLLI2SR must be added - only for I2S configuration */ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S)) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLM) */ - /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SR); - } - - /*---------------------------- SAI configuration -------------------------*/ - /* In Case of SAI Clock Configuration through PLLI2S, PLLI2SQ and PLLI2S_DIVQ must - be added only for SAI configuration */ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == (RCC_PERIPHCLK_SAI_PLLI2S)) - { - /* Check the PLLI2S division factors */ - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ)); - - /* Read PLLI2SR value from PLLI2SCFGR register (this value is not need for SAI configuration) */ - tmpreg1 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */ - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */ - __HAL_RCC_PLLI2S_SAICLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ , tmpreg1); - /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */ - __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ); - } - - /*----------------- In Case of PLLI2S is just selected -----------------*/ - if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S) - { - /* Check for Parameters */ - assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - - /* Configure the PLLI2S multiplication and division factors */ - __HAL_RCC_PLLI2S_SAICLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN, PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR); - } - - /* Enable the PLLI2S */ - __HAL_RCC_PLLI2S_ENABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - /*--------------------------------------------------------------------------*/ - - /*----------------------- SAI/LTDC Configuration (PLLSAI) ------------------*/ - /*----------------------- Common configuration SAI/LTDC --------------------*/ - /* In Case of SAI or LTDC Clock Configuration through PLLSAI, PLLSAIN division - factor is common parameters for both peripherals */ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == RCC_PERIPHCLK_SAI_PLLSAI) || - (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC)) - { - /* Check the PLLSAI division factors */ - assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN)); - - /* Disable PLLSAI Clock */ - __HAL_RCC_PLLSAI_DISABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLSAI is disabled */ - while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /*---------------------------- SAI configuration -------------------------*/ - /* In Case of SAI Clock Configuration through PLLSAI, PLLSAIQ and PLLSAI_DIVQ must - be added only for SAI configuration */ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == (RCC_PERIPHCLK_SAI_PLLSAI)) - { - assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ)); - assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ)); - - /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */ - tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> RCC_PLLSAICFGR_PLLSAIR_Pos); - /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ - /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ - /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */ - __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , PeriphClkInit->PLLSAI.PLLSAIQ, tmpreg1); - /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */ - __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ); - } - - /*---------------------------- LTDC configuration ------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == (RCC_PERIPHCLK_LTDC)) - { - assert_param(IS_RCC_PLLSAIR_VALUE(PeriphClkInit->PLLSAI.PLLSAIR)); - assert_param(IS_RCC_PLLSAI_DIVR_VALUE(PeriphClkInit->PLLSAIDivR)); - - /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */ - tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); - /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ - /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ - /* LTDC_CLK(first level) = PLLSAI_VCO Output/PLLSAIR */ - __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , tmpreg1, PeriphClkInit->PLLSAI.PLLSAIR); - /* LTDC_CLK = LTDC_CLK(first level)/PLLSAIDIVR */ - __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLSAIDivR); - } - /* Enable PLLSAI Clock */ - __HAL_RCC_PLLSAI_ENABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLSAI is ready */ - while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- RTC configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) - { - /* Check for RTC Parameters used to output RTCCLK */ - assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); - - /* Enable Power Clock*/ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Enable write access to Backup domain */ - PWR->CR |= PWR_CR_DBP; - - /* Get tick */ - tickstart = HAL_GetTick(); - - while((PWR->CR & PWR_CR_DBP) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ - tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL); - if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) - { - /* Store the content of BDCR register before the reset of Backup Domain */ - tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); - /* RTC Clock selection can be changed only if the Backup Domain is reset */ - __HAL_RCC_BACKUPRESET_FORCE(); - __HAL_RCC_BACKUPRESET_RELEASE(); - /* Restore the Content of BDCR register */ - RCC->BDCR = tmpreg1; - - /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ - if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON)) - { - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); - } - /*--------------------------------------------------------------------------*/ - - /*---------------------------- TIM configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM)) - { - __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); - } - return HAL_OK; -} - -/** - * @brief Configures the PeriphClkInit according to the internal - * RCC configuration registers. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * will be configured. - * @retval None - */ -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tempreg; - - /* Set all possible values for the extended clock type parameter------------*/ - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_SAI_PLLSAI | RCC_PERIPHCLK_SAI_PLLI2S | RCC_PERIPHCLK_LTDC | RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC; - - /* Get the PLLI2S Clock configuration -----------------------------------------------*/ - PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos); - PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); - PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); - /* Get the PLLSAI Clock configuration -----------------------------------------------*/ - PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> RCC_PLLSAICFGR_PLLSAIN_Pos); - PeriphClkInit->PLLSAI.PLLSAIR = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> RCC_PLLSAICFGR_PLLSAIR_Pos); - PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); - /* Get the PLLSAI/PLLI2S division factors -----------------------------------------------*/ - PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) >> RCC_DCKCFGR_PLLI2SDIVQ_Pos); - PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> RCC_DCKCFGR_PLLSAIDIVQ_Pos); - PeriphClkInit->PLLSAIDivR = (uint32_t)(RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVR); - /* Get the RTC Clock configuration -----------------------------------------------*/ - tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE); - PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL)); - - if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET) - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; - } - else - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; - } -} - -/** - * @brief Return the peripheral clock frequency for a given peripheral(SAI..) - * @note Return 0 if peripheral clock identifier not managed by this API - * @param PeriphClk Peripheral clock identifier - * This parameter can be one of the following values: - * @arg RCC_PERIPHCLK_I2S: I2S peripheral clock - * @retval Frequency in KHz - */ -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) -{ - /* This variable used to store the I2S clock frequency (value in Hz) */ - uint32_t frequency = 0U; - /* This variable used to store the VCO Input (value in Hz) */ - uint32_t vcoinput = 0U; - uint32_t srcclk = 0U; - /* This variable used to store the VCO Output (value in Hz) */ - uint32_t vcooutput = 0U; - switch (PeriphClk) - { - case RCC_PERIPHCLK_I2S: - { - /* Get the current I2S source */ - srcclk = __HAL_RCC_GET_I2S_SOURCE(); - switch (srcclk) - { - /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ - case RCC_I2SCLKSOURCE_EXT: - { - /* Set the I2S clock to the external clock value */ - frequency = EXTERNAL_CLOCK_VALUE; - break; - } - /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ - case RCC_I2SCLKSOURCE_PLLI2S: - { - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); - /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); - break; - } - /* Clock not enabled for I2S*/ - default: - { - frequency = 0U; - break; - } - } - break; - } - } - return frequency; -} -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) -/** - * @brief Initializes the RCC extended peripherals clocks according to the specified parameters in the - * RCC_PeriphCLKInitTypeDef. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * contains the configuration information for the Extended Peripherals clocks(I2S and RTC clocks). - * - * @note A caution to be taken when HAL_RCCEx_PeriphCLKConfig() is used to select RTC clock selection, in this case - * the Reset of Backup domain will be applied in order to modify the RTC Clock source as consequence all backup - * domain (RTC and RCC_BDCR register expect BKPSRAM) will be reset - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tickstart = 0U; - uint32_t tmpreg1 = 0U; - - /* Check the parameters */ - assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); - - /*---------------------------- I2S configuration ---------------------------*/ - if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || - (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S)) - { - /* check for Parameters */ - assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); - assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN)); -#if defined(STM32F411xE) - assert_param(IS_RCC_PLLI2SM_VALUE(PeriphClkInit->PLLI2S.PLLI2SM)); -#endif /* STM32F411xE */ - /* Disable the PLLI2S */ - __HAL_RCC_PLLI2S_DISABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - -#if defined(STM32F411xE) - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */ - /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */ - __HAL_RCC_PLLI2S_I2SCLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN, PeriphClkInit->PLLI2S.PLLI2SR); -#else - /* Configure the PLLI2S division factors */ - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLM) */ - /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SR); -#endif /* STM32F411xE */ - - /* Enable the PLLI2S */ - __HAL_RCC_PLLI2S_ENABLE(); - /* Get tick */ - tickstart = HAL_GetTick(); - /* Wait till PLLI2S is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - } - - /*---------------------------- RTC configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) - { - /* Check for RTC Parameters used to output RTCCLK */ - assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); - - /* Enable Power Clock*/ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Enable write access to Backup domain */ - PWR->CR |= PWR_CR_DBP; - - /* Get tick */ - tickstart = HAL_GetTick(); - - while((PWR->CR & PWR_CR_DBP) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ - tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL); - if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) - { - /* Store the content of BDCR register before the reset of Backup Domain */ - tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); - /* RTC Clock selection can be changed only if the Backup Domain is reset */ - __HAL_RCC_BACKUPRESET_FORCE(); - __HAL_RCC_BACKUPRESET_RELEASE(); - /* Restore the Content of BDCR register */ - RCC->BDCR = tmpreg1; - - /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ - if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON)) - { - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); - } -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) - /*---------------------------- TIM configuration ---------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM)) - { - __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); - } -#endif /* STM32F401xC || STM32F401xE || STM32F411xE */ - return HAL_OK; -} - -/** - * @brief Configures the RCC_OscInitStruct according to the internal - * RCC configuration registers. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * will be configured. - * @retval None - */ -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tempreg; - - /* Set all possible values for the extended clock type parameter------------*/ - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_RTC; - - /* Get the PLLI2S Clock configuration --------------------------------------*/ - PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos); - PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); -#if defined(STM32F411xE) - PeriphClkInit->PLLI2S.PLLI2SM = (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM); -#endif /* STM32F411xE */ - /* Get the RTC Clock configuration -----------------------------------------*/ - tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE); - PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL)); - -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) - /* Get the TIM Prescaler configuration -------------------------------------*/ - if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET) - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; - } - else - { - PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; - } -#endif /* STM32F401xC || STM32F401xE || STM32F411xE */ -} - -/** - * @brief Return the peripheral clock frequency for a given peripheral(SAI..) - * @note Return 0 if peripheral clock identifier not managed by this API - * @param PeriphClk Peripheral clock identifier - * This parameter can be one of the following values: - * @arg RCC_PERIPHCLK_I2S: I2S peripheral clock - * @retval Frequency in KHz - */ -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) -{ - /* This variable used to store the I2S clock frequency (value in Hz) */ - uint32_t frequency = 0U; - /* This variable used to store the VCO Input (value in Hz) */ - uint32_t vcoinput = 0U; - uint32_t srcclk = 0U; - /* This variable used to store the VCO Output (value in Hz) */ - uint32_t vcooutput = 0U; - switch (PeriphClk) - { - case RCC_PERIPHCLK_I2S: - { - /* Get the current I2S source */ - srcclk = __HAL_RCC_GET_I2S_SOURCE(); - switch (srcclk) - { - /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ - case RCC_I2SCLKSOURCE_EXT: - { - /* Set the I2S clock to the external clock value */ - frequency = EXTERNAL_CLOCK_VALUE; - break; - } - /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ - case RCC_I2SCLKSOURCE_PLLI2S: - { -#if defined(STM32F411xE) - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); - } -#else - /* Configure the PLLI2S division factor */ - /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */ - if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } - else - { - /* Get the I2S source clock value */ - vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); - } -#endif /* STM32F411xE */ - /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ - vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); - /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ - frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); - break; - } - /* Clock not enabled for I2S*/ - default: - { - frequency = 0U; - break; - } - } - break; - } - } - return frequency; -} -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief Select LSE mode - * - * @note This mode is only available for STM32F410xx/STM32F411xx/STM32F446xx/STM32F469xx/STM32F479xx/STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices. - * - * @param Mode specifies the LSE mode. - * This parameter can be one of the following values: - * @arg RCC_LSE_LOWPOWER_MODE: LSE oscillator in low power mode selection - * @arg RCC_LSE_HIGHDRIVE_MODE: LSE oscillator in High Drive mode selection - * @retval None - */ -void HAL_RCCEx_SelectLSEMode(uint8_t Mode) -{ - /* Check the parameters */ - assert_param(IS_RCC_LSE_MODE(Mode)); - if(Mode == RCC_LSE_HIGHDRIVE_MODE) - { - SET_BIT(RCC->BDCR, RCC_BDCR_LSEMOD); - } - else - { - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEMOD); - } -} - -#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -/** @defgroup RCCEx_Exported_Functions_Group2 Extended Clock management functions - * @brief Extended Clock management functions - * -@verbatim - =============================================================================== - ##### Extended clock management functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the - activation or deactivation of PLLI2S, PLLSAI. -@endverbatim - * @{ - */ - -#if defined(RCC_PLLI2S_SUPPORT) -/** - * @brief Enable PLLI2S. - * @param PLLI2SInit pointer to an RCC_PLLI2SInitTypeDef structure that - * contains the configuration information for the PLLI2S - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_EnablePLLI2S(RCC_PLLI2SInitTypeDef *PLLI2SInit) -{ - uint32_t tickstart; - - /* Check for parameters */ - assert_param(IS_RCC_PLLI2SN_VALUE(PLLI2SInit->PLLI2SN)); - assert_param(IS_RCC_PLLI2SR_VALUE(PLLI2SInit->PLLI2SR)); -#if defined(RCC_PLLI2SCFGR_PLLI2SM) - assert_param(IS_RCC_PLLI2SM_VALUE(PLLI2SInit->PLLI2SM)); -#endif /* RCC_PLLI2SCFGR_PLLI2SM */ -#if defined(RCC_PLLI2SCFGR_PLLI2SP) - assert_param(IS_RCC_PLLI2SP_VALUE(PLLI2SInit->PLLI2SP)); -#endif /* RCC_PLLI2SCFGR_PLLI2SP */ -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) - assert_param(IS_RCC_PLLI2SQ_VALUE(PLLI2SInit->PLLI2SQ)); -#endif /* RCC_PLLI2SCFGR_PLLI2SQ */ - - /* Disable the PLLI2S */ - __HAL_RCC_PLLI2S_DISABLE(); - - /* Wait till PLLI2S is disabled */ - tickstart = HAL_GetTick(); - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /* Configure the PLLI2S division factors */ -#if defined(STM32F446xx) - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */ - /* I2SPCLK = PLLI2S_VCO / PLLI2SP */ - /* I2SQCLK = PLLI2S_VCO / PLLI2SQ */ - /* I2SRCLK = PLLI2S_VCO / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PLLI2SInit->PLLI2SM, PLLI2SInit->PLLI2SN, \ - PLLI2SInit->PLLI2SP, PLLI2SInit->PLLI2SQ, PLLI2SInit->PLLI2SR); -#elif defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ - defined(STM32F413xx) || defined(STM32F423xx) - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM)*/ - /* I2SQCLK = PLLI2S_VCO / PLLI2SQ */ - /* I2SRCLK = PLLI2S_VCO / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PLLI2SInit->PLLI2SM, PLLI2SInit->PLLI2SN, \ - PLLI2SInit->PLLI2SQ, PLLI2SInit->PLLI2SR); -#elif defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * PLLI2SN */ - /* I2SQCLK = PLLI2S_VCO / PLLI2SQ */ - /* I2SRCLK = PLLI2S_VCO / PLLI2SR */ - __HAL_RCC_PLLI2S_SAICLK_CONFIG(PLLI2SInit->PLLI2SN, PLLI2SInit->PLLI2SQ, PLLI2SInit->PLLI2SR); -#elif defined(STM32F411xE) - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */ - /* I2SRCLK = PLLI2S_VCO / PLLI2SR */ - __HAL_RCC_PLLI2S_I2SCLK_CONFIG(PLLI2SInit->PLLI2SM, PLLI2SInit->PLLI2SN, PLLI2SInit->PLLI2SR); -#else - /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x PLLI2SN */ - /* I2SRCLK = PLLI2S_VCO / PLLI2SR */ - __HAL_RCC_PLLI2S_CONFIG(PLLI2SInit->PLLI2SN, PLLI2SInit->PLLI2SR); -#endif /* STM32F446xx */ - - /* Enable the PLLI2S */ - __HAL_RCC_PLLI2S_ENABLE(); - - /* Wait till PLLI2S is ready */ - tickstart = HAL_GetTick(); - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -/** - * @brief Disable PLLI2S. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_DisablePLLI2S(void) -{ - uint32_t tickstart; - - /* Disable the PLLI2S */ - __HAL_RCC_PLLI2S_DISABLE(); - - /* Wait till PLLI2S is disabled */ - tickstart = HAL_GetTick(); - while(READ_BIT(RCC->CR, RCC_CR_PLLI2SRDY) != RESET) - { - if((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** - * @brief Enable PLLSAI. - * @param PLLSAIInit pointer to an RCC_PLLSAIInitTypeDef structure that - * contains the configuration information for the PLLSAI - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI(RCC_PLLSAIInitTypeDef *PLLSAIInit) -{ - uint32_t tickstart; - - /* Check for parameters */ - assert_param(IS_RCC_PLLSAIN_VALUE(PLLSAIInit->PLLSAIN)); - assert_param(IS_RCC_PLLSAIQ_VALUE(PLLSAIInit->PLLSAIQ)); -#if defined(RCC_PLLSAICFGR_PLLSAIM) - assert_param(IS_RCC_PLLSAIM_VALUE(PLLSAIInit->PLLSAIM)); -#endif /* RCC_PLLSAICFGR_PLLSAIM */ -#if defined(RCC_PLLSAICFGR_PLLSAIP) - assert_param(IS_RCC_PLLSAIP_VALUE(PLLSAIInit->PLLSAIP)); -#endif /* RCC_PLLSAICFGR_PLLSAIP */ -#if defined(RCC_PLLSAICFGR_PLLSAIR) - assert_param(IS_RCC_PLLSAIR_VALUE(PLLSAIInit->PLLSAIR)); -#endif /* RCC_PLLSAICFGR_PLLSAIR */ - - /* Disable the PLLSAI */ - __HAL_RCC_PLLSAI_DISABLE(); - - /* Wait till PLLSAI is disabled */ - tickstart = HAL_GetTick(); - while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - /* Configure the PLLSAI division factors */ -#if defined(STM32F446xx) - /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) * (PLLSAIN/PLLSAIM) */ - /* SAIPCLK = PLLSAI_VCO / PLLSAIP */ - /* SAIQCLK = PLLSAI_VCO / PLLSAIQ */ - /* SAIRCLK = PLLSAI_VCO / PLLSAIR */ - __HAL_RCC_PLLSAI_CONFIG(PLLSAIInit->PLLSAIM, PLLSAIInit->PLLSAIN, \ - PLLSAIInit->PLLSAIP, PLLSAIInit->PLLSAIQ, 0U); -#elif defined(STM32F469xx) || defined(STM32F479xx) - /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) * PLLSAIN */ - /* SAIPCLK = PLLSAI_VCO / PLLSAIP */ - /* SAIQCLK = PLLSAI_VCO / PLLSAIQ */ - /* SAIRCLK = PLLSAI_VCO / PLLSAIR */ - __HAL_RCC_PLLSAI_CONFIG(PLLSAIInit->PLLSAIN, PLLSAIInit->PLLSAIP, \ - PLLSAIInit->PLLSAIQ, PLLSAIInit->PLLSAIR); -#else - /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) x PLLSAIN */ - /* SAIQCLK = PLLSAI_VCO / PLLSAIQ */ - /* SAIRCLK = PLLSAI_VCO / PLLSAIR */ - __HAL_RCC_PLLSAI_CONFIG(PLLSAIInit->PLLSAIN, PLLSAIInit->PLLSAIQ, PLLSAIInit->PLLSAIR); -#endif /* STM32F446xx */ - - /* Enable the PLLSAI */ - __HAL_RCC_PLLSAI_ENABLE(); - - /* Wait till PLLSAI is ready */ - tickstart = HAL_GetTick(); - while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -/** - * @brief Disable PLLSAI. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI(void) -{ - uint32_t tickstart; - - /* Disable the PLLSAI */ - __HAL_RCC_PLLSAI_DISABLE(); - - /* Wait till PLLSAI is disabled */ - tickstart = HAL_GetTick(); - while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET) - { - if((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE) - { - /* return in case of Timeout detected */ - return HAL_TIMEOUT; - } - } - - return HAL_OK; -} - -#endif /* RCC_PLLSAI_SUPPORT */ - -/** - * @} - */ - -#if defined(STM32F446xx) -/** - * @brief Returns the SYSCLK frequency - * - * @note This function implementation is valid only for STM32F446xx devices. - * @note This function add the PLL/PLLR System clock source - * - * @note The system frequency computed by this function is not the real - * frequency in the chip. It is calculated based on the predefined - * constant and the selected clock source: - * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*) - * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**) - * @note If SYSCLK source is PLL or PLLR, function returns values based on HSE_VALUE(**) - * or HSI_VALUE(*) multiplied/divided by the PLL factors. - * @note (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value - * 16 MHz) but the real value may vary depending on the variations - * in voltage and temperature. - * @note (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value - * 25 MHz), user has to ensure that HSE_VALUE is same as the real - * frequency of the crystal used. Otherwise, this function may - * have wrong result. - * - * @note The result of this function could be not correct when using fractional - * value for HSE crystal. - * - * @note This function can be used by the user application to compute the - * baudrate for the communication peripherals or configure other parameters. - * - * @note Each time SYSCLK changes, this function must be called to update the - * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. - * - * - * @retval SYSCLK frequency - */ -uint32_t HAL_RCC_GetSysClockFreq(void) -{ - uint32_t pllm = 0U; - uint32_t pllvco = 0U; - uint32_t pllp = 0U; - uint32_t pllr = 0U; - uint32_t sysclockfreq = 0U; - - /* Get SYSCLK source -------------------------------------------------------*/ - switch (RCC->CFGR & RCC_CFGR_SWS) - { - case RCC_CFGR_SWS_HSI: /* HSI used as system clock source */ - { - sysclockfreq = HSI_VALUE; - break; - } - case RCC_CFGR_SWS_HSE: /* HSE used as system clock source */ - { - sysclockfreq = HSE_VALUE; - break; - } - case RCC_CFGR_SWS_PLL: /* PLL/PLLP used as system clock source */ - { - /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN - SYSCLK = PLL_VCO / PLLP */ - pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; - if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI) - { - /* HSE used as PLL clock source */ - pllvco = (uint32_t) ((((uint64_t) HSE_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm); - } - else - { - /* HSI used as PLL clock source */ - pllvco = (uint32_t) ((((uint64_t) HSI_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm); - } - pllp = ((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> RCC_PLLCFGR_PLLP_Pos) + 1U) *2U); - - sysclockfreq = pllvco/pllp; - break; - } - case RCC_CFGR_SWS_PLLR: /* PLL/PLLR used as system clock source */ - { - /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN - SYSCLK = PLL_VCO / PLLR */ - pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; - if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI) - { - /* HSE used as PLL clock source */ - pllvco = (uint32_t) ((((uint64_t) HSE_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm); - } - else - { - /* HSI used as PLL clock source */ - pllvco = (uint32_t) ((((uint64_t) HSI_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm); - } - pllr = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos); - - sysclockfreq = pllvco/pllr; - break; - } - default: - { - sysclockfreq = HSI_VALUE; - break; - } - } - return sysclockfreq; -} -#endif /* STM32F446xx */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @brief Resets the RCC clock configuration to the default reset state. - * @note The default reset state of the clock configuration is given below: - * - HSI ON and used as system clock source - * - HSE, PLL, PLLI2S and PLLSAI OFF - * - AHB, APB1 and APB2 prescaler set to 1. - * - CSS, MCO1 and MCO2 OFF - * - All interrupts disabled - * @note This function doesn't modify the configuration of the - * - Peripheral clocks - * - LSI, LSE and RTC clocks - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCC_DeInit(void) -{ - uint32_t tickstart; - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Set HSION bit to the reset value */ - SET_BIT(RCC->CR, RCC_CR_HSION); - - /* Wait till HSI is ready */ - while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == RESET) - { - if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Set HSITRIM[4:0] bits to the reset value */ - SET_BIT(RCC->CR, RCC_CR_HSITRIM_4); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Reset CFGR register */ - CLEAR_REG(RCC->CFGR); - - /* Wait till clock switch is ready */ - while (READ_BIT(RCC->CFGR, RCC_CFGR_SWS) != RESET) - { - if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Clear HSEON, HSEBYP and CSSON bits */ - CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_HSEBYP | RCC_CR_CSSON); - - /* Wait till HSE is disabled */ - while (READ_BIT(RCC->CR, RCC_CR_HSERDY) != RESET) - { - if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Clear PLLON bit */ - CLEAR_BIT(RCC->CR, RCC_CR_PLLON); - - /* Wait till PLL is disabled */ - while (READ_BIT(RCC->CR, RCC_CR_PLLRDY) != RESET) - { - if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - -#if defined(RCC_PLLI2S_SUPPORT) - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Reset PLLI2SON bit */ - CLEAR_BIT(RCC->CR, RCC_CR_PLLI2SON); - - /* Wait till PLLI2S is disabled */ - while (READ_BIT(RCC->CR, RCC_CR_PLLI2SRDY) != RESET) - { - if ((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Reset PLLSAI bit */ - CLEAR_BIT(RCC->CR, RCC_CR_PLLSAION); - - /* Wait till PLLSAI is disabled */ - while (READ_BIT(RCC->CR, RCC_CR_PLLSAIRDY) != RESET) - { - if ((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } -#endif /* RCC_PLLSAI_SUPPORT */ - - /* Once PLL, PLLI2S and PLLSAI are OFF, reset PLLCFGR register to default value */ -#if defined(STM32F412Cx) || defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || \ - defined(STM32F423xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) - RCC->PLLCFGR = RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLN_6 | RCC_PLLCFGR_PLLN_7 | RCC_PLLCFGR_PLLQ_2 | RCC_PLLCFGR_PLLR_1; -#elif defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) - RCC->PLLCFGR = RCC_PLLCFGR_PLLR_0 | RCC_PLLCFGR_PLLR_1 | RCC_PLLCFGR_PLLR_2 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLN_6 | RCC_PLLCFGR_PLLN_7 | RCC_PLLCFGR_PLLQ_0 | RCC_PLLCFGR_PLLQ_1 | RCC_PLLCFGR_PLLQ_2 | RCC_PLLCFGR_PLLQ_3; -#else - RCC->PLLCFGR = RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLN_6 | RCC_PLLCFGR_PLLN_7 | RCC_PLLCFGR_PLLQ_2; -#endif /* STM32F412Cx || STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx || STM32F446xx || STM32F469xx || STM32F479xx */ - - /* Reset PLLI2SCFGR register to default value */ -#if defined(STM32F412Cx) || defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || \ - defined(STM32F423xx) || defined(STM32F446xx) - RCC->PLLI2SCFGR = RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SN_6 | RCC_PLLI2SCFGR_PLLI2SN_7 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SR_1; -#elif defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) - RCC->PLLI2SCFGR = RCC_PLLI2SCFGR_PLLI2SN_6 | RCC_PLLI2SCFGR_PLLI2SN_7 | RCC_PLLI2SCFGR_PLLI2SR_1; -#elif defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) - RCC->PLLI2SCFGR = RCC_PLLI2SCFGR_PLLI2SN_6 | RCC_PLLI2SCFGR_PLLI2SN_7 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SR_1; -#elif defined(STM32F411xE) - RCC->PLLI2SCFGR = RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SN_6 | RCC_PLLI2SCFGR_PLLI2SN_7 | RCC_PLLI2SCFGR_PLLI2SR_1; -#endif /* STM32F412Cx || STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx || STM32F446xx */ - - /* Reset PLLSAICFGR register */ -#if defined(STM32F427xx) || defined(STM32F429xx) || defined(STM32F437xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) - RCC->PLLSAICFGR = RCC_PLLSAICFGR_PLLSAIN_6 | RCC_PLLSAICFGR_PLLSAIN_7 | RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIR_1; -#elif defined(STM32F446xx) - RCC->PLLSAICFGR = RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIN_6 | RCC_PLLSAICFGR_PLLSAIN_7 | RCC_PLLSAICFGR_PLLSAIQ_2; -#endif /* STM32F427xx || STM32F429xx || STM32F437xx || STM32F439xx || STM32F469xx || STM32F479xx */ - - /* Disable all interrupts */ - CLEAR_BIT(RCC->CIR, RCC_CIR_LSIRDYIE | RCC_CIR_LSERDYIE | RCC_CIR_HSIRDYIE | RCC_CIR_HSERDYIE | RCC_CIR_PLLRDYIE); - -#if defined(RCC_CIR_PLLI2SRDYIE) - CLEAR_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYIE); -#endif /* RCC_CIR_PLLI2SRDYIE */ - -#if defined(RCC_CIR_PLLSAIRDYIE) - CLEAR_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYIE); -#endif /* RCC_CIR_PLLSAIRDYIE */ - - /* Clear all interrupt flags */ - SET_BIT(RCC->CIR, RCC_CIR_LSIRDYC | RCC_CIR_LSERDYC | RCC_CIR_HSIRDYC | RCC_CIR_HSERDYC | RCC_CIR_PLLRDYC | RCC_CIR_CSSC); - -#if defined(RCC_CIR_PLLI2SRDYC) - SET_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYC); -#endif /* RCC_CIR_PLLI2SRDYC */ - -#if defined(RCC_CIR_PLLSAIRDYC) - SET_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYC); -#endif /* RCC_CIR_PLLSAIRDYC */ - - /* Clear LSION bit */ - CLEAR_BIT(RCC->CSR, RCC_CSR_LSION); - - /* Reset all CSR flags */ - SET_BIT(RCC->CSR, RCC_CSR_RMVF); - - /* Update the SystemCoreClock global variable */ - SystemCoreClock = HSI_VALUE; - - /* Adapt Systick interrupt period */ - if(HAL_InitTick(uwTickPrio) != HAL_OK) - { - return HAL_ERROR; - } - else - { - return HAL_OK; - } -} - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief Initializes the RCC Oscillators according to the specified parameters in the - * RCC_OscInitTypeDef. - * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that - * contains the configuration information for the RCC Oscillators. - * @note The PLL is not disabled when used as system clock. - * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not - * supported by this API. User should request a transition to LSE Off - * first and then LSE On or LSE Bypass. - * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not - * supported by this API. User should request a transition to HSE Off - * first and then HSE On or HSE Bypass. - * @note This function add the PLL/PLLR factor management during PLL configuration this feature - * is only available in STM32F410xx/STM32F446xx/STM32F469xx/STM32F479xx/STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) -{ - uint32_t tickstart, pll_config; - - /* Check Null pointer */ - if(RCC_OscInitStruct == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); - /*------------------------------- HSE Configuration ------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) - { - /* Check the parameters */ - assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); - /* When the HSE is used as system clock or clock source for PLL in these cases HSE will not disabled */ -#if defined(STM32F446xx) - if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSE) ||\ - ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE)) ||\ - ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLLR) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE))) -#else - if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSE) ||\ - ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE))) -#endif /* STM32F446xx */ - { - if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) - { - return HAL_ERROR; - } - } - else - { - /* Set the new HSE configuration ---------------------------------------*/ - __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); - - /* Check the HSE State */ - if((RCC_OscInitStruct->HSEState) != RCC_HSE_OFF) - { - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSE is bypassed or disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - } - /*----------------------------- HSI Configuration --------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) - { - /* Check the parameters */ - assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); - assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); - - /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */ -#if defined(STM32F446xx) - if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSI) ||\ - ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI)) ||\ - ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLLR) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI))) -#else - if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSI) ||\ - ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI))) -#endif /* STM32F446xx */ - { - /* When HSI is used as system clock it will not disabled */ - if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON)) - { - return HAL_ERROR; - } - /* Otherwise, just the calibration is allowed */ - else - { - /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ - __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); - } - } - else - { - /* Check the HSI State */ - if((RCC_OscInitStruct->HSIState)!= RCC_HSI_OFF) - { - /* Enable the Internal High Speed oscillator (HSI). */ - __HAL_RCC_HSI_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ - __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); - } - else - { - /* Disable the Internal High Speed oscillator (HSI). */ - __HAL_RCC_HSI_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till HSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - } - /*------------------------------ LSI Configuration -------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) - { - /* Check the parameters */ - assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); - - /* Check the LSI State */ - if((RCC_OscInitStruct->LSIState)!= RCC_LSI_OFF) - { - /* Enable the Internal Low Speed oscillator (LSI). */ - __HAL_RCC_LSI_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Disable the Internal Low Speed oscillator (LSI). */ - __HAL_RCC_LSI_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - /*------------------------------ LSE Configuration -------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) - { - FlagStatus pwrclkchanged = RESET; - - /* Check the parameters */ - assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); - - /* Update LSE configuration in Backup Domain control register */ - /* Requires to enable write access to Backup Domain of necessary */ - if(__HAL_RCC_PWR_IS_CLK_DISABLED()) - { - __HAL_RCC_PWR_CLK_ENABLE(); - pwrclkchanged = SET; - } - - if(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) - { - /* Enable write access to Backup domain */ - SET_BIT(PWR->CR, PWR_CR_DBP); - - /* Wait for Backup domain Write protection disable */ - tickstart = HAL_GetTick(); - - while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) - { - if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - - /* Set the new LSE configuration -----------------------------------------*/ - __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); - /* Check the LSE State */ - if((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF) - { - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - - /* Restore clock configuration if changed */ - if(pwrclkchanged == SET) - { - __HAL_RCC_PWR_CLK_DISABLE(); - } - } - /*-------------------------------- PLL Configuration -----------------------*/ - /* Check the parameters */ - assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); - if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE) - { - /* Check if the PLL is used as system clock or not */ - if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL) - { - if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON) - { - /* Check the parameters */ - assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); - assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM)); - assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN)); - assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP)); - assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ)); - assert_param(IS_RCC_PLLR_VALUE(RCC_OscInitStruct->PLL.PLLR)); - - /* Disable the main PLL. */ - __HAL_RCC_PLL_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLL is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Configure the main PLL clock source, multiplication and division factors. */ - WRITE_REG(RCC->PLLCFGR, (RCC_OscInitStruct->PLL.PLLSource | \ - RCC_OscInitStruct->PLL.PLLM | \ - (RCC_OscInitStruct->PLL.PLLN << RCC_PLLCFGR_PLLN_Pos) | \ - (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U) << RCC_PLLCFGR_PLLP_Pos) | \ - (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos) | \ - (RCC_OscInitStruct->PLL.PLLR << RCC_PLLCFGR_PLLR_Pos))); - /* Enable the main PLL. */ - __HAL_RCC_PLL_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLL is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Disable the main PLL. */ - __HAL_RCC_PLL_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLL is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - else - { - /* Check if there is a request to disable the PLL used as System clock source */ - if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) - { - return HAL_ERROR; - } - else - { - /* Do not return HAL_ERROR if request repeats the current configuration */ - pll_config = RCC->PLLCFGR; -#if defined (RCC_PLLCFGR_PLLR) - if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != (RCC_OscInitStruct->PLL.PLLM) << RCC_PLLCFGR_PLLM_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN) << RCC_PLLCFGR_PLLN_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U)) << RCC_PLLCFGR_PLLP_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos)) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLR) != (RCC_OscInitStruct->PLL.PLLR << RCC_PLLCFGR_PLLR_Pos))) -#else - if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != (RCC_OscInitStruct->PLL.PLLM) << RCC_PLLCFGR_PLLM_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN) << RCC_PLLCFGR_PLLN_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U)) << RCC_PLLCFGR_PLLP_Pos) || - (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos))) -#endif - { - return HAL_ERROR; - } - } - } - } - return HAL_OK; -} - -/** - * @brief Configures the RCC_OscInitStruct according to the internal - * RCC configuration registers. - * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that will be configured. - * - * @note This function is only available in case of STM32F410xx/STM32F446xx/STM32F469xx/STM32F479xx/STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices. - * @note This function add the PLL/PLLR factor management - * @retval None - */ -void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) -{ - /* Set all possible values for the Oscillator type parameter ---------------*/ - RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI; - - /* Get the HSE configuration -----------------------------------------------*/ - if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP) - { - RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS; - } - else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON) - { - RCC_OscInitStruct->HSEState = RCC_HSE_ON; - } - else - { - RCC_OscInitStruct->HSEState = RCC_HSE_OFF; - } - - /* Get the HSI configuration -----------------------------------------------*/ - if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION) - { - RCC_OscInitStruct->HSIState = RCC_HSI_ON; - } - else - { - RCC_OscInitStruct->HSIState = RCC_HSI_OFF; - } - - RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos); - - /* Get the LSE configuration -----------------------------------------------*/ - if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP) - { - RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS; - } - else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON) - { - RCC_OscInitStruct->LSEState = RCC_LSE_ON; - } - else - { - RCC_OscInitStruct->LSEState = RCC_LSE_OFF; - } - - /* Get the LSI configuration -----------------------------------------------*/ - if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION) - { - RCC_OscInitStruct->LSIState = RCC_LSI_ON; - } - else - { - RCC_OscInitStruct->LSIState = RCC_LSI_OFF; - } - - /* Get the PLL configuration -----------------------------------------------*/ - if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON) - { - RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON; - } - else - { - RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF; - } - RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC); - RCC_OscInitStruct->PLL.PLLM = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM); - RCC_OscInitStruct->PLL.PLLN = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos); - RCC_OscInitStruct->PLL.PLLP = (uint32_t)((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) + RCC_PLLCFGR_PLLP_0) << 1U) >> RCC_PLLCFGR_PLLP_Pos); - RCC_OscInitStruct->PLL.PLLQ = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos); - RCC_OscInitStruct->PLL.PLLR = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos); -} -#endif /* STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#endif /* HAL_RCC_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - +/** + ****************************************************************************** + * @file stm32f4xx_hal_rcc_ex.c + * @author MCD Application Team + * @brief Extension RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities RCC extension peripheral: + * + Extended Peripheral Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup RCCEx RCCEx + * @brief RCCEx HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup RCCEx_Private_Constants + * @{ + */ +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions + * @{ + */ + +/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the RCC Clocks + frequencies. + [..] + (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to + select the RTC clock source; in this case the Backup domain will be reset in + order to modify the RTC Clock source, as consequence RTC registers (including + the backup registers) and RCC_BDCR register are set to their reset values. + +@endverbatim + * @{ + */ + +#if defined(STM32F446xx) +/** + * @brief Initializes the RCC extended peripherals clocks according to the specified + * parameters in the RCC_PeriphCLKInitTypeDef. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * contains the configuration information for the Extended Peripherals + * clocks(I2S, SAI, LTDC RTC and TIM). + * + * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select + * the RTC clock source; in this case the Backup domain will be reset in + * order to modify the RTC Clock source, as consequence RTC registers (including + * the backup registers) and RCC_BDCR register are set to their reset values. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tickstart = 0U; + uint32_t tmpreg1 = 0U; + uint32_t plli2sp = 0U; + uint32_t plli2sq = 0U; + uint32_t plli2sr = 0U; + uint32_t pllsaip = 0U; + uint32_t pllsaiq = 0U; + uint32_t plli2sused = 0U; + uint32_t pllsaiused = 0U; + + /* Check the peripheral clock selection parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); + + /*------------------------ I2S APB1 configuration --------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == (RCC_PERIPHCLK_I2S_APB1)) + { + /* Check the parameters */ + assert_param(IS_RCC_I2SAPB1CLKSOURCE(PeriphClkInit->I2sApb1ClockSelection)); + + /* Configure I2S Clock source */ + __HAL_RCC_I2S_APB1_CONFIG(PeriphClkInit->I2sApb1ClockSelection); + /* Enable the PLLI2S when it's used as clock source for I2S */ + if(PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S) + { + plli2sused = 1U; + } + } + /*--------------------------------------------------------------------------*/ + + /*---------------------------- I2S APB2 configuration ----------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == (RCC_PERIPHCLK_I2S_APB2)) + { + /* Check the parameters */ + assert_param(IS_RCC_I2SAPB2CLKSOURCE(PeriphClkInit->I2sApb2ClockSelection)); + + /* Configure I2S Clock source */ + __HAL_RCC_I2S_APB2_CONFIG(PeriphClkInit->I2sApb2ClockSelection); + /* Enable the PLLI2S when it's used as clock source for I2S */ + if(PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S) + { + plli2sused = 1U; + } + } + /*--------------------------------------------------------------------------*/ + + /*--------------------------- SAI1 configuration ---------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == (RCC_PERIPHCLK_SAI1)) + { + /* Check the parameters */ + assert_param(IS_RCC_SAI1CLKSOURCE(PeriphClkInit->Sai1ClockSelection)); + + /* Configure SAI1 Clock source */ + __HAL_RCC_SAI1_CONFIG(PeriphClkInit->Sai1ClockSelection); + /* Enable the PLLI2S when it's used as clock source for SAI */ + if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S) + { + plli2sused = 1U; + } + /* Enable the PLLSAI when it's used as clock source for SAI */ + if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI) + { + pllsaiused = 1U; + } + } + /*--------------------------------------------------------------------------*/ + + /*-------------------------- SAI2 configuration ----------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == (RCC_PERIPHCLK_SAI2)) + { + /* Check the parameters */ + assert_param(IS_RCC_SAI2CLKSOURCE(PeriphClkInit->Sai2ClockSelection)); + + /* Configure SAI2 Clock source */ + __HAL_RCC_SAI2_CONFIG(PeriphClkInit->Sai2ClockSelection); + + /* Enable the PLLI2S when it's used as clock source for SAI */ + if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S) + { + plli2sused = 1U; + } + /* Enable the PLLSAI when it's used as clock source for SAI */ + if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI) + { + pllsaiused = 1U; + } + } + /*--------------------------------------------------------------------------*/ + + /*----------------------------- RTC configuration --------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) + { + /* Check for RTC Parameters used to output RTCCLK */ + assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); + + /* Enable Power Clock*/ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* Enable write access to Backup domain */ + PWR->CR |= PWR_CR_DBP; + + /* Get tick */ + tickstart = HAL_GetTick(); + + while((PWR->CR & PWR_CR_DBP) == RESET) + { + if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ + tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL); + if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) + { + /* Store the content of BDCR register before the reset of Backup Domain */ + tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); + /* RTC Clock selection can be changed only if the Backup Domain is reset */ + __HAL_RCC_BACKUPRESET_FORCE(); + __HAL_RCC_BACKUPRESET_RELEASE(); + /* Restore the Content of BDCR register */ + RCC->BDCR = tmpreg1; + + /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ + if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON)) + { + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); + } + /*--------------------------------------------------------------------------*/ + + /*---------------------------- TIM configuration ---------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM)) + { + /* Configure Timer Prescaler */ + __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); + } + /*--------------------------------------------------------------------------*/ + + /*---------------------------- FMPI2C1 Configuration -----------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FMPI2C1) == RCC_PERIPHCLK_FMPI2C1) + { + /* Check the parameters */ + assert_param(IS_RCC_FMPI2C1CLKSOURCE(PeriphClkInit->Fmpi2c1ClockSelection)); + + /* Configure the FMPI2C1 clock source */ + __HAL_RCC_FMPI2C1_CONFIG(PeriphClkInit->Fmpi2c1ClockSelection); + } + /*--------------------------------------------------------------------------*/ + + /*------------------------------ CEC Configuration -------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) + { + /* Check the parameters */ + assert_param(IS_RCC_CECCLKSOURCE(PeriphClkInit->CecClockSelection)); + + /* Configure the CEC clock source */ + __HAL_RCC_CEC_CONFIG(PeriphClkInit->CecClockSelection); + } + /*--------------------------------------------------------------------------*/ + + /*----------------------------- CLK48 Configuration ------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) + { + /* Check the parameters */ + assert_param(IS_RCC_CLK48CLKSOURCE(PeriphClkInit->Clk48ClockSelection)); + + /* Configure the CLK48 clock source */ + __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection); + + /* Enable the PLLSAI when it's used as clock source for CLK48 */ + if(PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLSAIP) + { + pllsaiused = 1U; + } + } + /*--------------------------------------------------------------------------*/ + + /*----------------------------- SDIO Configuration -------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDIO) == RCC_PERIPHCLK_SDIO) + { + /* Check the parameters */ + assert_param(IS_RCC_SDIOCLKSOURCE(PeriphClkInit->SdioClockSelection)); + + /* Configure the SDIO clock source */ + __HAL_RCC_SDIO_CONFIG(PeriphClkInit->SdioClockSelection); + } + /*--------------------------------------------------------------------------*/ + + /*------------------------------ SPDIFRX Configuration ---------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) + { + /* Check the parameters */ + assert_param(IS_RCC_SPDIFRXCLKSOURCE(PeriphClkInit->SpdifClockSelection)); + + /* Configure the SPDIFRX clock source */ + __HAL_RCC_SPDIFRX_CONFIG(PeriphClkInit->SpdifClockSelection); + /* Enable the PLLI2S when it's used as clock source for SPDIFRX */ + if(PeriphClkInit->SpdifClockSelection == RCC_SPDIFRXCLKSOURCE_PLLI2SP) + { + plli2sused = 1U; + } + } + /*--------------------------------------------------------------------------*/ + + /*---------------------------- PLLI2S Configuration ------------------------*/ + /* PLLI2S is configured when a peripheral will use it as source clock : SAI1, SAI2, I2S on APB1, + I2S on APB2 or SPDIFRX */ + if((plli2sused == 1U) || (PeriphClkInit->PeriphClockSelection == RCC_PERIPHCLK_PLLI2S)) + { + /* Disable the PLLI2S */ + __HAL_RCC_PLLI2S_DISABLE(); + /* Get tick */ + tickstart = HAL_GetTick(); + /* Wait till PLLI2S is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) + { + /* return in case of Timeout detected */ + return HAL_TIMEOUT; + } + } + + /* check for common PLLI2S Parameters */ + assert_param(IS_RCC_PLLI2SM_VALUE(PeriphClkInit->PLLI2S.PLLI2SM)); + assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN)); + + /*------ In Case of PLLI2S is selected as source clock for I2S -----------*/ + if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == RCC_PERIPHCLK_I2S_APB1) && (PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S)) || + ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == RCC_PERIPHCLK_I2S_APB2) && (PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S))) + { + /* check for Parameters */ + assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); + + /* Read PLLI2SP/PLLI2SQ value from PLLI2SCFGR register (this value is not needed for I2S configuration) */ + plli2sp = ((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> RCC_PLLI2SCFGR_PLLI2SP_Pos) + 1U) << 1U); + plli2sq = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); + /* Configure the PLLI2S division factors */ + /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */ + /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */ + __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , plli2sp, plli2sq, PeriphClkInit->PLLI2S.PLLI2SR); + } + + /*------- In Case of PLLI2S is selected as source clock for SAI ----------*/ + if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S)) || + ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S))) + { + /* Check for PLLI2S Parameters */ + assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); + /* Check for PLLI2S/DIVQ parameters */ + assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ)); + + /* Read PLLI2SP/PLLI2SR value from PLLI2SCFGR register (this value is not needed for SAI configuration) */ + plli2sp = ((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> RCC_PLLI2SCFGR_PLLI2SP_Pos) + 1U) << 1U); + plli2sr = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); + /* Configure the PLLI2S division factors */ + /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ + /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ + /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */ + __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , plli2sp, PeriphClkInit->PLLI2S.PLLI2SQ, plli2sr); + + /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */ + __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ); + } + + /*------ In Case of PLLI2S is selected as source clock for SPDIFRX -------*/ + if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) && (PeriphClkInit->SpdifClockSelection == RCC_SPDIFRXCLKSOURCE_PLLI2SP)) + { + /* check for Parameters */ + assert_param(IS_RCC_PLLI2SP_VALUE(PeriphClkInit->PLLI2S.PLLI2SP)); + /* Read PLLI2SR value from PLLI2SCFGR register (this value is not need for SAI configuration) */ + plli2sq = ((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> RCC_PLLI2SCFGR_PLLI2SP_Pos) + 1U) << 1U); + plli2sr = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); + /* Configure the PLLI2S division factors */ + /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */ + /* SPDIFRXCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SP */ + __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SP, plli2sq, plli2sr); + } + + /*----------------- In Case of PLLI2S is just selected -----------------*/ + if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S) + { + /* Check for Parameters */ + assert_param(IS_RCC_PLLI2SP_VALUE(PeriphClkInit->PLLI2S.PLLI2SP)); + assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); + assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); + + /* Configure the PLLI2S division factors */ + /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */ + __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SP, PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR); + } + + /* Enable the PLLI2S */ + __HAL_RCC_PLLI2S_ENABLE(); + /* Get tick */ + tickstart = HAL_GetTick(); + /* Wait till PLLI2S is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) + { + /* return in case of Timeout detected */ + return HAL_TIMEOUT; + } + } + } + /*--------------------------------------------------------------------------*/ + + /*----------------------------- PLLSAI Configuration -----------------------*/ + /* PLLSAI is configured when a peripheral will use it as source clock : SAI1, SAI2, CLK48 or SDIO */ + if(pllsaiused == 1U) + { + /* Disable PLLSAI Clock */ + __HAL_RCC_PLLSAI_DISABLE(); + /* Get tick */ + tickstart = HAL_GetTick(); + /* Wait till PLLSAI is disabled */ + while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET) + { + if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) + { + /* return in case of Timeout detected */ + return HAL_TIMEOUT; + } + } + + /* Check the PLLSAI division factors */ + assert_param(IS_RCC_PLLSAIM_VALUE(PeriphClkInit->PLLSAI.PLLSAIM)); + assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN)); + + /*------ In Case of PLLSAI is selected as source clock for SAI -----------*/ + if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI)) || + ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI))) + { + /* check for PLLSAIQ Parameter */ + assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ)); + /* check for PLLSAI/DIVQ Parameter */ + assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ)); + + /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */ + pllsaip = ((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos) + 1U) << 1U); + /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ + /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ + /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */ + __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIM, PeriphClkInit->PLLSAI.PLLSAIN , pllsaip, PeriphClkInit->PLLSAI.PLLSAIQ, 0U); + + /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */ + __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ); + } + + /*------ In Case of PLLSAI is selected as source clock for CLK48 ---------*/ + /* In Case of PLLI2S is selected as source clock for CLK48 */ + if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLSAIP)) + { + /* check for Parameters */ + assert_param(IS_RCC_PLLSAIP_VALUE(PeriphClkInit->PLLSAI.PLLSAIP)); + /* Read PLLSAIQ value from PLLI2SCFGR register (this value is not need for SAI configuration) */ + pllsaiq = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); + /* Configure the PLLSAI division factors */ + /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) * (PLLI2SN/PLLSAIM) */ + /* 48CLK = f(PLLSAI clock output) = f(VCO clock) / PLLSAIP */ + __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIM, PeriphClkInit->PLLSAI.PLLSAIN , PeriphClkInit->PLLSAI.PLLSAIP, pllsaiq, 0U); + } + + /* Enable PLLSAI Clock */ + __HAL_RCC_PLLSAI_ENABLE(); + /* Get tick */ + tickstart = HAL_GetTick(); + /* Wait till PLLSAI is ready */ + while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET) + { + if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) + { + /* return in case of Timeout detected */ + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + +/** + * @brief Get the RCC_PeriphCLKInitTypeDef according to the internal + * RCC configuration registers. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * will be configured. + * @retval None + */ +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tempreg; + + /* Set all possible values for the extended clock type parameter------------*/ + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S_APB1 | RCC_PERIPHCLK_I2S_APB2 |\ + RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 |\ + RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\ + RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_FMPI2C1 |\ + RCC_PERIPHCLK_CLK48 | RCC_PERIPHCLK_SDIO |\ + RCC_PERIPHCLK_SPDIFRX; + + /* Get the PLLI2S Clock configuration --------------------------------------*/ + PeriphClkInit->PLLI2S.PLLI2SM = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM) >> RCC_PLLI2SCFGR_PLLI2SM_Pos); + PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos); + PeriphClkInit->PLLI2S.PLLI2SP = (uint32_t)((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> RCC_PLLI2SCFGR_PLLI2SP_Pos) + 1U) << 1U); + PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); + PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); + /* Get the PLLSAI Clock configuration --------------------------------------*/ + PeriphClkInit->PLLSAI.PLLSAIM = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIM) >> RCC_PLLSAICFGR_PLLSAIM_Pos); + PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> RCC_PLLSAICFGR_PLLSAIN_Pos); + PeriphClkInit->PLLSAI.PLLSAIP = (uint32_t)((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos) + 1U) << 1U); + PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); + /* Get the PLLSAI/PLLI2S division factors ----------------------------------*/ + PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) >> RCC_DCKCFGR_PLLI2SDIVQ_Pos); + PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> RCC_DCKCFGR_PLLSAIDIVQ_Pos); + + /* Get the SAI1 clock configuration ----------------------------------------*/ + PeriphClkInit->Sai1ClockSelection = __HAL_RCC_GET_SAI1_SOURCE(); + + /* Get the SAI2 clock configuration ----------------------------------------*/ + PeriphClkInit->Sai2ClockSelection = __HAL_RCC_GET_SAI2_SOURCE(); + + /* Get the I2S APB1 clock configuration ------------------------------------*/ + PeriphClkInit->I2sApb1ClockSelection = __HAL_RCC_GET_I2S_APB1_SOURCE(); + + /* Get the I2S APB2 clock configuration ------------------------------------*/ + PeriphClkInit->I2sApb2ClockSelection = __HAL_RCC_GET_I2S_APB2_SOURCE(); + + /* Get the RTC Clock configuration -----------------------------------------*/ + tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE); + PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL)); + + /* Get the CEC clock configuration -----------------------------------------*/ + PeriphClkInit->CecClockSelection = __HAL_RCC_GET_CEC_SOURCE(); + + /* Get the FMPI2C1 clock configuration -------------------------------------*/ + PeriphClkInit->Fmpi2c1ClockSelection = __HAL_RCC_GET_FMPI2C1_SOURCE(); + + /* Get the CLK48 clock configuration ----------------------------------------*/ + PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE(); + + /* Get the SDIO clock configuration ----------------------------------------*/ + PeriphClkInit->SdioClockSelection = __HAL_RCC_GET_SDIO_SOURCE(); + + /* Get the SPDIFRX clock configuration -------------------------------------*/ + PeriphClkInit->SpdifClockSelection = __HAL_RCC_GET_SPDIFRX_SOURCE(); + + /* Get the TIM Prescaler configuration -------------------------------------*/ + if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET) + { + PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; + } + else + { + PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; + } +} + +/** + * @brief Return the peripheral clock frequency for a given peripheral(SAI..) + * @note Return 0 if peripheral clock identifier not managed by this API + * @param PeriphClk Peripheral clock identifier + * This parameter can be one of the following values: + * @arg RCC_PERIPHCLK_SAI1: SAI1 peripheral clock + * @arg RCC_PERIPHCLK_SAI2: SAI2 peripheral clock + * @arg RCC_PERIPHCLK_I2S_APB1: I2S APB1 peripheral clock + * @arg RCC_PERIPHCLK_I2S_APB2: I2S APB2 peripheral clock + * @retval Frequency in KHz + */ +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) +{ + uint32_t tmpreg1 = 0U; + /* This variable used to store the SAI clock frequency (value in Hz) */ + uint32_t frequency = 0U; + /* This variable used to store the VCO Input (value in Hz) */ + uint32_t vcoinput = 0U; + /* This variable used to store the SAI clock source */ + uint32_t saiclocksource = 0U; + uint32_t srcclk = 0U; + /* This variable used to store the VCO Output (value in Hz) */ + uint32_t vcooutput = 0U; + switch (PeriphClk) + { + case RCC_PERIPHCLK_SAI1: + case RCC_PERIPHCLK_SAI2: + { + saiclocksource = RCC->DCKCFGR; + saiclocksource &= (RCC_DCKCFGR_SAI1SRC | RCC_DCKCFGR_SAI2SRC); + switch (saiclocksource) + { + case 0U: /* PLLSAI is the clock source for SAI*/ + { + /* Configure the PLLSAI division factor */ + /* PLLSAI_VCO Input = PLL_SOURCE/PLLSAIM */ + if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI) + { + /* In Case the PLL Source is HSI (Internal Clock) */ + vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIM)); + } + else + { + /* In Case the PLL Source is HSE (External Clock) */ + vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIM))); + } + /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ + /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */ + tmpreg1 = (RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> 24U; + frequency = (vcoinput * ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> 6U))/(tmpreg1); + + /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */ + tmpreg1 = (((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> 8U) + 1U); + frequency = frequency/(tmpreg1); + break; + } + case RCC_DCKCFGR_SAI1SRC_0: /* PLLI2S is the clock source for SAI*/ + case RCC_DCKCFGR_SAI2SRC_0: /* PLLI2S is the clock source for SAI*/ + { + /* Configure the PLLI2S division factor */ + /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ + if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI) + { + /* In Case the PLL Source is HSI (Internal Clock) */ + vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); + } + else + { + /* In Case the PLL Source is HSE (External Clock) */ + vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM))); + } + + /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ + /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */ + tmpreg1 = (RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> 24U; + frequency = (vcoinput * ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U))/(tmpreg1); + + /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */ + tmpreg1 = ((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) + 1U); + frequency = frequency/(tmpreg1); + break; + } + case RCC_DCKCFGR_SAI1SRC_1: /* PLLR is the clock source for SAI*/ + case RCC_DCKCFGR_SAI2SRC_1: /* PLLR is the clock source for SAI*/ + { + /* Configure the PLLI2S division factor */ + /* PLL_VCO Input = PLL_SOURCE/PLLM */ + if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI) + { + /* In Case the PLL Source is HSI (Internal Clock) */ + vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); + } + else + { + /* In Case the PLL Source is HSE (External Clock) */ + vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM))); + } + + /* PLL_VCO Output = PLL_VCO Input * PLLN */ + /* SAI_CLK_x = PLL_VCO Output/PLLR */ + tmpreg1 = (RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U; + frequency = (vcoinput * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U))/(tmpreg1); + break; + } + case RCC_DCKCFGR_SAI1SRC: /* External clock is the clock source for SAI*/ + { + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + case RCC_DCKCFGR_SAI2SRC: /* PLLSRC(HSE or HSI) is the clock source for SAI*/ + { + if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI) + { + /* In Case the PLL Source is HSI (Internal Clock) */ + frequency = (uint32_t)(HSI_VALUE); + } + else + { + /* In Case the PLL Source is HSE (External Clock) */ + frequency = (uint32_t)(HSE_VALUE); + } + break; + } + default : + { + break; + } + } + break; + } + case RCC_PERIPHCLK_I2S_APB1: + { + /* Get the current I2S source */ + srcclk = __HAL_RCC_GET_I2S_APB1_SOURCE(); + switch (srcclk) + { + /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ + case RCC_I2SAPB1CLKSOURCE_EXT: + { + /* Set the I2S clock to the external clock value */ + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ + case RCC_I2SAPB1CLKSOURCE_PLLI2S: + { + /* Configure the PLLI2S division factor */ + /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ + if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); + } + else + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); + } + + /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ + vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); + /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ + frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); + break; + } + /* Check if I2S clock selection is PLL VCO Output divided by PLLR used as I2S clock */ + case RCC_I2SAPB1CLKSOURCE_PLLR: + { + /* Configure the PLL division factor R */ + /* PLL_VCO Input = PLL_SOURCE/PLLM */ + if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); + } + else + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); + } + + /* PLL_VCO Output = PLL_VCO Input * PLLN */ + vcooutput = (uint32_t)(vcoinput * (((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U) & (RCC_PLLCFGR_PLLN >> 6U))); + /* I2S_CLK = PLL_VCO Output/PLLR */ + frequency = (uint32_t)(vcooutput /(((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U) & (RCC_PLLCFGR_PLLR >> 28U))); + break; + } + /* Check if I2S clock selection is HSI or HSE depending from PLL source Clock */ + case RCC_I2SAPB1CLKSOURCE_PLLSRC: + { + if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) + { + frequency = HSE_VALUE; + } + else + { + frequency = HSI_VALUE; + } + break; + } + /* Clock not enabled for I2S*/ + default: + { + frequency = 0U; + break; + } + } + break; + } + case RCC_PERIPHCLK_I2S_APB2: + { + /* Get the current I2S source */ + srcclk = __HAL_RCC_GET_I2S_APB2_SOURCE(); + switch (srcclk) + { + /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ + case RCC_I2SAPB2CLKSOURCE_EXT: + { + /* Set the I2S clock to the external clock value */ + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ + case RCC_I2SAPB2CLKSOURCE_PLLI2S: + { + /* Configure the PLLI2S division factor */ + /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ + if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); + } + else + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); + } + + /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ + vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); + /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ + frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); + break; + } + /* Check if I2S clock selection is PLL VCO Output divided by PLLR used as I2S clock */ + case RCC_I2SAPB2CLKSOURCE_PLLR: + { + /* Configure the PLL division factor R */ + /* PLL_VCO Input = PLL_SOURCE/PLLM */ + if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); + } + else + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); + } + + /* PLL_VCO Output = PLL_VCO Input * PLLN */ + vcooutput = (uint32_t)(vcoinput * (((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U) & (RCC_PLLCFGR_PLLN >> 6U))); + /* I2S_CLK = PLL_VCO Output/PLLR */ + frequency = (uint32_t)(vcooutput /(((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U) & (RCC_PLLCFGR_PLLR >> 28U))); + break; + } + /* Check if I2S clock selection is HSI or HSE depending from PLL source Clock */ + case RCC_I2SAPB2CLKSOURCE_PLLSRC: + { + if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) + { + frequency = HSE_VALUE; + } + else + { + frequency = HSI_VALUE; + } + break; + } + /* Clock not enabled for I2S*/ + default: + { + frequency = 0U; + break; + } + } + break; + } + } + return frequency; +} +#endif /* STM32F446xx */ + +#if defined(STM32F469xx) || defined(STM32F479xx) +/** + * @brief Initializes the RCC extended peripherals clocks according to the specified + * parameters in the RCC_PeriphCLKInitTypeDef. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * contains the configuration information for the Extended Peripherals + * clocks(I2S, SAI, LTDC, RTC and TIM). + * + * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select + * the RTC clock source; in this case the Backup domain will be reset in + * order to modify the RTC Clock source, as consequence RTC registers (including + * the backup registers) and RCC_BDCR register are set to their reset values. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tickstart = 0U; + uint32_t tmpreg1 = 0U; + uint32_t pllsaip = 0U; + uint32_t pllsaiq = 0U; + uint32_t pllsair = 0U; + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); + + /*--------------------------- CLK48 Configuration --------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) + { + /* Check the parameters */ + assert_param(IS_RCC_CLK48CLKSOURCE(PeriphClkInit->Clk48ClockSelection)); + + /* Configure the CLK48 clock source */ + __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection); + } + /*--------------------------------------------------------------------------*/ + + /*------------------------------ SDIO Configuration ------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDIO) == RCC_PERIPHCLK_SDIO) + { + /* Check the parameters */ + assert_param(IS_RCC_SDIOCLKSOURCE(PeriphClkInit->SdioClockSelection)); + + /* Configure the SDIO clock source */ + __HAL_RCC_SDIO_CONFIG(PeriphClkInit->SdioClockSelection); + } + /*--------------------------------------------------------------------------*/ + + /*----------------------- SAI/I2S Configuration (PLLI2S) -------------------*/ + /*------------------- Common configuration SAI/I2S -------------------------*/ + /* In Case of SAI or I2S Clock Configuration through PLLI2S, PLLI2SN division + factor is common parameters for both peripherals */ + if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || + (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == RCC_PERIPHCLK_SAI_PLLI2S) || + (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S)) + { + /* check for Parameters */ + assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN)); + + /* Disable the PLLI2S */ + __HAL_RCC_PLLI2S_DISABLE(); + /* Get tick */ + tickstart = HAL_GetTick(); + /* Wait till PLLI2S is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) + { + /* return in case of Timeout detected */ + return HAL_TIMEOUT; + } + } + + /*---------------------- I2S configuration -------------------------------*/ + /* In Case of I2S Clock Configuration through PLLI2S, PLLI2SR must be added + only for I2S configuration */ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S)) + { + /* check for Parameters */ + assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); + /* Configure the PLLI2S division factors */ + /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x (PLLI2SN/PLLM) */ + /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */ + __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SR); + } + + /*---------------------------- SAI configuration -------------------------*/ + /* In Case of SAI Clock Configuration through PLLI2S, PLLI2SQ and PLLI2S_DIVQ must + be added only for SAI configuration */ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == (RCC_PERIPHCLK_SAI_PLLI2S)) + { + /* Check the PLLI2S division factors */ + assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); + assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ)); + + /* Read PLLI2SR value from PLLI2SCFGR register (this value is not need for SAI configuration) */ + tmpreg1 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); + /* Configure the PLLI2S division factors */ + /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */ + /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ + /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */ + __HAL_RCC_PLLI2S_SAICLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ , tmpreg1); + /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */ + __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ); + } + + /*----------------- In Case of PLLI2S is just selected -----------------*/ + if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S) + { + /* Check for Parameters */ + assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); + assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); + + /* Configure the PLLI2S multiplication and division factors */ + __HAL_RCC_PLLI2S_SAICLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN, PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR); + } + + /* Enable the PLLI2S */ + __HAL_RCC_PLLI2S_ENABLE(); + /* Get tick */ + tickstart = HAL_GetTick(); + /* Wait till PLLI2S is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) + { + /* return in case of Timeout detected */ + return HAL_TIMEOUT; + } + } + } + /*--------------------------------------------------------------------------*/ + + /*----------------------- SAI/LTDC Configuration (PLLSAI) ------------------*/ + /*----------------------- Common configuration SAI/LTDC --------------------*/ + /* In Case of SAI, LTDC or CLK48 Clock Configuration through PLLSAI, PLLSAIN division + factor is common parameters for these peripherals */ + if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == RCC_PERIPHCLK_SAI_PLLSAI) || + (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC) || + ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) && + (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLSAIP))) + { + /* Check the PLLSAI division factors */ + assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN)); + + /* Disable PLLSAI Clock */ + __HAL_RCC_PLLSAI_DISABLE(); + /* Get tick */ + tickstart = HAL_GetTick(); + /* Wait till PLLSAI is disabled */ + while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET) + { + if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) + { + /* return in case of Timeout detected */ + return HAL_TIMEOUT; + } + } + + /*---------------------------- SAI configuration -------------------------*/ + /* In Case of SAI Clock Configuration through PLLSAI, PLLSAIQ and PLLSAI_DIVQ must + be added only for SAI configuration */ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == (RCC_PERIPHCLK_SAI_PLLSAI)) + { + assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ)); + assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ)); + + /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */ + pllsaip = ((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos) + 1U) << 1U); + /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */ + pllsair = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> RCC_PLLSAICFGR_PLLSAIR_Pos); + /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ + /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ + /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */ + __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN, pllsaip, PeriphClkInit->PLLSAI.PLLSAIQ, pllsair); + /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */ + __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ); + } + + /*---------------------------- LTDC configuration ------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == (RCC_PERIPHCLK_LTDC)) + { + assert_param(IS_RCC_PLLSAIR_VALUE(PeriphClkInit->PLLSAI.PLLSAIR)); + assert_param(IS_RCC_PLLSAI_DIVR_VALUE(PeriphClkInit->PLLSAIDivR)); + + /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */ + pllsaip = ((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> RCC_PLLSAICFGR_PLLSAIP_Pos) + 1U) << 1U); + /* Read PLLSAIQ value from PLLSAICFGR register (this value is not need for SAI configuration) */ + pllsaiq = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); + /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ + /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ + /* LTDC_CLK(first level) = PLLSAI_VCO Output/PLLSAIR */ + __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN, pllsaip, pllsaiq, PeriphClkInit->PLLSAI.PLLSAIR); + /* LTDC_CLK = LTDC_CLK(first level)/PLLSAIDIVR */ + __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLSAIDivR); + } + + /*---------------------------- CLK48 configuration ------------------------*/ + /* Configure the PLLSAI when it is used as clock source for CLK48 */ + if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == (RCC_PERIPHCLK_CLK48)) && + (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLSAIP)) + { + assert_param(IS_RCC_PLLSAIP_VALUE(PeriphClkInit->PLLSAI.PLLSAIP)); + + /* Read PLLSAIQ value from PLLSAICFGR register (this value is not need for SAI configuration) */ + pllsaiq = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); + /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */ + pllsair = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> RCC_PLLSAICFGR_PLLSAIR_Pos); + /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ + /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ + /* CLK48_CLK(first level) = PLLSAI_VCO Output/PLLSAIP */ + __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN, PeriphClkInit->PLLSAI.PLLSAIP, pllsaiq, pllsair); + } + + /* Enable PLLSAI Clock */ + __HAL_RCC_PLLSAI_ENABLE(); + /* Get tick */ + tickstart = HAL_GetTick(); + /* Wait till PLLSAI is ready */ + while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET) + { + if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) + { + /* return in case of Timeout detected */ + return HAL_TIMEOUT; + } + } + } + + /*--------------------------------------------------------------------------*/ + + /*---------------------------- RTC configuration ---------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) + { + /* Check for RTC Parameters used to output RTCCLK */ + assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); + + /* Enable Power Clock*/ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* Enable write access to Backup domain */ + PWR->CR |= PWR_CR_DBP; + + /* Get tick */ + tickstart = HAL_GetTick(); + + while((PWR->CR & PWR_CR_DBP) == RESET) + { + if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ + tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL); + if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) + { + /* Store the content of BDCR register before the reset of Backup Domain */ + tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); + /* RTC Clock selection can be changed only if the Backup Domain is reset */ + __HAL_RCC_BACKUPRESET_FORCE(); + __HAL_RCC_BACKUPRESET_RELEASE(); + /* Restore the Content of BDCR register */ + RCC->BDCR = tmpreg1; + + /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ + if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON)) + { + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); + } + /*--------------------------------------------------------------------------*/ + + /*---------------------------- TIM configuration ---------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM)) + { + __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); + } + return HAL_OK; +} + +/** + * @brief Configures the RCC_PeriphCLKInitTypeDef according to the internal + * RCC configuration registers. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * will be configured. + * @retval None + */ +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tempreg; + + /* Set all possible values for the extended clock type parameter------------*/ + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_SAI_PLLSAI |\ + RCC_PERIPHCLK_SAI_PLLI2S | RCC_PERIPHCLK_LTDC |\ + RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\ + RCC_PERIPHCLK_CLK48 | RCC_PERIPHCLK_SDIO; + + /* Get the PLLI2S Clock configuration --------------------------------------*/ + PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos); + PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); + PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); + /* Get the PLLSAI Clock configuration --------------------------------------*/ + PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> RCC_PLLSAICFGR_PLLSAIN_Pos); + PeriphClkInit->PLLSAI.PLLSAIR = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> RCC_PLLSAICFGR_PLLSAIR_Pos); + PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); + /* Get the PLLSAI/PLLI2S division factors ----------------------------------*/ + PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) >> RCC_DCKCFGR_PLLI2SDIVQ_Pos); + PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> RCC_DCKCFGR_PLLSAIDIVQ_Pos); + PeriphClkInit->PLLSAIDivR = (uint32_t)(RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVR); + /* Get the RTC Clock configuration -----------------------------------------*/ + tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE); + PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL)); + + /* Get the CLK48 clock configuration -------------------------------------*/ + PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE(); + + /* Get the SDIO clock configuration ----------------------------------------*/ + PeriphClkInit->SdioClockSelection = __HAL_RCC_GET_SDIO_SOURCE(); + + if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET) + { + PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; + } + else + { + PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; + } +} + +/** + * @brief Return the peripheral clock frequency for a given peripheral(SAI..) + * @note Return 0 if peripheral clock identifier not managed by this API + * @param PeriphClk Peripheral clock identifier + * This parameter can be one of the following values: + * @arg RCC_PERIPHCLK_I2S: I2S peripheral clock + * @retval Frequency in KHz + */ +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) +{ + /* This variable used to store the I2S clock frequency (value in Hz) */ + uint32_t frequency = 0U; + /* This variable used to store the VCO Input (value in Hz) */ + uint32_t vcoinput = 0U; + uint32_t srcclk = 0U; + /* This variable used to store the VCO Output (value in Hz) */ + uint32_t vcooutput = 0U; + switch (PeriphClk) + { + case RCC_PERIPHCLK_I2S: + { + /* Get the current I2S source */ + srcclk = __HAL_RCC_GET_I2S_SOURCE(); + switch (srcclk) + { + /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ + case RCC_I2SCLKSOURCE_EXT: + { + /* Set the I2S clock to the external clock value */ + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ + case RCC_I2SCLKSOURCE_PLLI2S: + { + /* Configure the PLLI2S division factor */ + /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ + if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); + } + else + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); + } + + /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ + vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); + /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ + frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); + break; + } + /* Clock not enabled for I2S*/ + default: + { + frequency = 0U; + break; + } + } + break; + } + } + return frequency; +} +#endif /* STM32F469xx || STM32F479xx */ + +#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +/** + * @brief Initializes the RCC extended peripherals clocks according to the specified + * parameters in the RCC_PeriphCLKInitTypeDef. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * contains the configuration information for the Extended Peripherals + * clocks(I2S, LTDC RTC and TIM). + * + * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select + * the RTC clock source; in this case the Backup domain will be reset in + * order to modify the RTC Clock source, as consequence RTC registers (including + * the backup registers) and RCC_BDCR register are set to their reset values. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tickstart = 0U; + uint32_t tmpreg1 = 0U; +#if defined(STM32F413xx) || defined(STM32F423xx) + uint32_t plli2sq = 0U; +#endif /* STM32F413xx || STM32F423xx */ + uint32_t plli2sused = 0U; + + /* Check the peripheral clock selection parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); + + /*----------------------------------- I2S APB1 configuration ---------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == (RCC_PERIPHCLK_I2S_APB1)) + { + /* Check the parameters */ + assert_param(IS_RCC_I2SAPB1CLKSOURCE(PeriphClkInit->I2sApb1ClockSelection)); + + /* Configure I2S Clock source */ + __HAL_RCC_I2S_APB1_CONFIG(PeriphClkInit->I2sApb1ClockSelection); + /* Enable the PLLI2S when it's used as clock source for I2S */ + if(PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S) + { + plli2sused = 1U; + } + } + /*--------------------------------------------------------------------------*/ + + /*----------------------------------- I2S APB2 configuration ---------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == (RCC_PERIPHCLK_I2S_APB2)) + { + /* Check the parameters */ + assert_param(IS_RCC_I2SAPB2CLKSOURCE(PeriphClkInit->I2sApb2ClockSelection)); + + /* Configure I2S Clock source */ + __HAL_RCC_I2S_APB2_CONFIG(PeriphClkInit->I2sApb2ClockSelection); + /* Enable the PLLI2S when it's used as clock source for I2S */ + if(PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S) + { + plli2sused = 1U; + } + } + /*--------------------------------------------------------------------------*/ + +#if defined(STM32F413xx) || defined(STM32F423xx) + /*----------------------- SAI1 Block A configuration -----------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAIA) == (RCC_PERIPHCLK_SAIA)) + { + /* Check the parameters */ + assert_param(IS_RCC_SAIACLKSOURCE(PeriphClkInit->SaiAClockSelection)); + + /* Configure SAI1 Clock source */ + __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(PeriphClkInit->SaiAClockSelection); + /* Enable the PLLI2S when it's used as clock source for SAI */ + if(PeriphClkInit->SaiAClockSelection == RCC_SAIACLKSOURCE_PLLI2SR) + { + plli2sused = 1U; + } + /* Enable the PLLSAI when it's used as clock source for SAI */ + if(PeriphClkInit->SaiAClockSelection == RCC_SAIACLKSOURCE_PLLR) + { + /* Check for PLL/DIVR parameters */ + assert_param(IS_RCC_PLL_DIVR_VALUE(PeriphClkInit->PLLDivR)); + + /* SAI_CLK_x = SAI_CLK(first level)/PLLDIVR */ + __HAL_RCC_PLL_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLDivR); + } + } + /*--------------------------------------------------------------------------*/ + + /*---------------------- SAI1 Block B configuration ------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAIB) == (RCC_PERIPHCLK_SAIB)) + { + /* Check the parameters */ + assert_param(IS_RCC_SAIBCLKSOURCE(PeriphClkInit->SaiBClockSelection)); + + /* Configure SAI1 Clock source */ + __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG(PeriphClkInit->SaiBClockSelection); + /* Enable the PLLI2S when it's used as clock source for SAI */ + if(PeriphClkInit->SaiBClockSelection == RCC_SAIBCLKSOURCE_PLLI2SR) + { + plli2sused = 1U; + } + /* Enable the PLLSAI when it's used as clock source for SAI */ + if(PeriphClkInit->SaiBClockSelection == RCC_SAIBCLKSOURCE_PLLR) + { + /* Check for PLL/DIVR parameters */ + assert_param(IS_RCC_PLL_DIVR_VALUE(PeriphClkInit->PLLDivR)); + + /* SAI_CLK_x = SAI_CLK(first level)/PLLDIVR */ + __HAL_RCC_PLL_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLDivR); + } + } + /*--------------------------------------------------------------------------*/ +#endif /* STM32F413xx || STM32F423xx */ + + /*------------------------------------ RTC configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) + { + /* Check for RTC Parameters used to output RTCCLK */ + assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); + + /* Enable Power Clock*/ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* Enable write access to Backup domain */ + PWR->CR |= PWR_CR_DBP; + + /* Get tick */ + tickstart = HAL_GetTick(); + + while((PWR->CR & PWR_CR_DBP) == RESET) + { + if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ + tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL); + if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) + { + /* Store the content of BDCR register before the reset of Backup Domain */ + tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); + /* RTC Clock selection can be changed only if the Backup Domain is reset */ + __HAL_RCC_BACKUPRESET_FORCE(); + __HAL_RCC_BACKUPRESET_RELEASE(); + /* Restore the Content of BDCR register */ + RCC->BDCR = tmpreg1; + + /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ + if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON)) + { + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); + } + /*--------------------------------------------------------------------------*/ + + /*------------------------------------ TIM configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM)) + { + /* Configure Timer Prescaler */ + __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); + } + /*--------------------------------------------------------------------------*/ + + /*------------------------------------- FMPI2C1 Configuration --------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FMPI2C1) == RCC_PERIPHCLK_FMPI2C1) + { + /* Check the parameters */ + assert_param(IS_RCC_FMPI2C1CLKSOURCE(PeriphClkInit->Fmpi2c1ClockSelection)); + + /* Configure the FMPI2C1 clock source */ + __HAL_RCC_FMPI2C1_CONFIG(PeriphClkInit->Fmpi2c1ClockSelection); + } + /*--------------------------------------------------------------------------*/ + + /*------------------------------------- CLK48 Configuration ----------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) + { + /* Check the parameters */ + assert_param(IS_RCC_CLK48CLKSOURCE(PeriphClkInit->Clk48ClockSelection)); + + /* Configure the SDIO clock source */ + __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection); + + /* Enable the PLLI2S when it's used as clock source for CLK48 */ + if(PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLI2SQ) + { + plli2sused = 1U; + } + } + /*--------------------------------------------------------------------------*/ + + /*------------------------------------- SDIO Configuration -----------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDIO) == RCC_PERIPHCLK_SDIO) + { + /* Check the parameters */ + assert_param(IS_RCC_SDIOCLKSOURCE(PeriphClkInit->SdioClockSelection)); + + /* Configure the SDIO clock source */ + __HAL_RCC_SDIO_CONFIG(PeriphClkInit->SdioClockSelection); + } + /*--------------------------------------------------------------------------*/ + + /*-------------------------------------- PLLI2S Configuration --------------*/ + /* PLLI2S is configured when a peripheral will use it as source clock : I2S on APB1 or + I2S on APB2*/ + if((plli2sused == 1U) || (PeriphClkInit->PeriphClockSelection == RCC_PERIPHCLK_PLLI2S)) + { + /* Disable the PLLI2S */ + __HAL_RCC_PLLI2S_DISABLE(); + /* Get tick */ + tickstart = HAL_GetTick(); + /* Wait till PLLI2S is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) + { + /* return in case of Timeout detected */ + return HAL_TIMEOUT; + } + } + + /* check for common PLLI2S Parameters */ + assert_param(IS_RCC_PLLI2SCLKSOURCE(PeriphClkInit->PLLI2SSelection)); + assert_param(IS_RCC_PLLI2SM_VALUE(PeriphClkInit->PLLI2S.PLLI2SM)); + assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN)); + /*-------------------- Set the PLL I2S clock -----------------------------*/ + __HAL_RCC_PLL_I2S_CONFIG(PeriphClkInit->PLLI2SSelection); + + /*------- In Case of PLLI2S is selected as source clock for I2S ----------*/ + if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == RCC_PERIPHCLK_I2S_APB1) && (PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S)) || + ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == RCC_PERIPHCLK_I2S_APB2) && (PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S)) || + ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLI2SQ)) || + ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDIO) == RCC_PERIPHCLK_SDIO) && (PeriphClkInit->SdioClockSelection == RCC_SDIOCLKSOURCE_CLK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CLK48CLKSOURCE_PLLI2SQ))) + { + /* check for Parameters */ + assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); + assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); + + /* Configure the PLLI2S division factors */ + /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM)*/ + /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */ + __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR); + } + +#if defined(STM32F413xx) || defined(STM32F423xx) + /*------- In Case of PLLI2S is selected as source clock for SAI ----------*/ + if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAIA) == RCC_PERIPHCLK_SAIA) && (PeriphClkInit->SaiAClockSelection == RCC_SAIACLKSOURCE_PLLI2SR)) || + ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAIB) == RCC_PERIPHCLK_SAIB) && (PeriphClkInit->SaiBClockSelection == RCC_SAIBCLKSOURCE_PLLI2SR))) + { + /* Check for PLLI2S Parameters */ + assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); + /* Check for PLLI2S/DIVR parameters */ + assert_param(IS_RCC_PLLI2S_DIVR_VALUE(PeriphClkInit->PLLI2SDivR)); + + /* Read PLLI2SQ value from PLLI2SCFGR register (this value is not needed for SAI configuration) */ + plli2sq = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); + /* Configure the PLLI2S division factors */ + /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ + /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ + /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */ + __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN, plli2sq, PeriphClkInit->PLLI2S.PLLI2SR); + + /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVR */ + __HAL_RCC_PLLI2S_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLI2SDivR); + } +#endif /* STM32F413xx || STM32F423xx */ + + /*----------------- In Case of PLLI2S is just selected ------------------*/ + if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S) + { + /* Check for Parameters */ + assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); + assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); + + /* Configure the PLLI2S division factors */ + /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM)*/ + /* SPDIFRXCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SP */ + __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR); + } + + /* Enable the PLLI2S */ + __HAL_RCC_PLLI2S_ENABLE(); + /* Get tick */ + tickstart = HAL_GetTick(); + /* Wait till PLLI2S is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) + { + /* return in case of Timeout detected */ + return HAL_TIMEOUT; + } + } + } + /*--------------------------------------------------------------------------*/ + + /*-------------------- DFSDM1 clock source configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1) + { + /* Check the parameters */ + assert_param(IS_RCC_DFSDM1CLKSOURCE(PeriphClkInit->Dfsdm1ClockSelection)); + + /* Configure the DFSDM1 interface clock source */ + __HAL_RCC_DFSDM1_CONFIG(PeriphClkInit->Dfsdm1ClockSelection); + } + /*--------------------------------------------------------------------------*/ + + /*-------------------- DFSDM1 Audio clock source configuration -------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1_AUDIO) == RCC_PERIPHCLK_DFSDM1_AUDIO) + { + /* Check the parameters */ + assert_param(IS_RCC_DFSDM1AUDIOCLKSOURCE(PeriphClkInit->Dfsdm1AudioClockSelection)); + + /* Configure the DFSDM1 Audio interface clock source */ + __HAL_RCC_DFSDM1AUDIO_CONFIG(PeriphClkInit->Dfsdm1AudioClockSelection); + } + /*--------------------------------------------------------------------------*/ + +#if defined(STM32F413xx) || defined(STM32F423xx) + /*-------------------- DFSDM2 clock source configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM2) == RCC_PERIPHCLK_DFSDM2) + { + /* Check the parameters */ + assert_param(IS_RCC_DFSDM2CLKSOURCE(PeriphClkInit->Dfsdm2ClockSelection)); + + /* Configure the DFSDM1 interface clock source */ + __HAL_RCC_DFSDM2_CONFIG(PeriphClkInit->Dfsdm2ClockSelection); + } + /*--------------------------------------------------------------------------*/ + + /*-------------------- DFSDM2 Audio clock source configuration -------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM2_AUDIO) == RCC_PERIPHCLK_DFSDM2_AUDIO) + { + /* Check the parameters */ + assert_param(IS_RCC_DFSDM2AUDIOCLKSOURCE(PeriphClkInit->Dfsdm2AudioClockSelection)); + + /* Configure the DFSDM1 Audio interface clock source */ + __HAL_RCC_DFSDM2AUDIO_CONFIG(PeriphClkInit->Dfsdm2AudioClockSelection); + } + /*--------------------------------------------------------------------------*/ + + /*---------------------------- LPTIM1 Configuration ------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) + { + /* Check the parameters */ + assert_param(IS_RCC_LPTIM1CLKSOURCE(PeriphClkInit->Lptim1ClockSelection)); + + /* Configure the LPTIM1 clock source */ + __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection); + } + /*--------------------------------------------------------------------------*/ +#endif /* STM32F413xx || STM32F423xx */ + + return HAL_OK; +} + +/** + * @brief Get the RCC_PeriphCLKInitTypeDef according to the internal + * RCC configuration registers. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * will be configured. + * @retval None + */ +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tempreg; + + /* Set all possible values for the extended clock type parameter------------*/ +#if defined(STM32F413xx) || defined(STM32F423xx) + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S_APB1 | RCC_PERIPHCLK_I2S_APB2 |\ + RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\ + RCC_PERIPHCLK_FMPI2C1 | RCC_PERIPHCLK_CLK48 |\ + RCC_PERIPHCLK_SDIO | RCC_PERIPHCLK_DFSDM1 |\ + RCC_PERIPHCLK_DFSDM1_AUDIO | RCC_PERIPHCLK_DFSDM2 |\ + RCC_PERIPHCLK_DFSDM2_AUDIO | RCC_PERIPHCLK_LPTIM1 |\ + RCC_PERIPHCLK_SAIA | RCC_PERIPHCLK_SAIB; +#else /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S_APB1 | RCC_PERIPHCLK_I2S_APB2 |\ + RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\ + RCC_PERIPHCLK_FMPI2C1 | RCC_PERIPHCLK_CLK48 |\ + RCC_PERIPHCLK_SDIO | RCC_PERIPHCLK_DFSDM1 |\ + RCC_PERIPHCLK_DFSDM1_AUDIO; +#endif /* STM32F413xx || STM32F423xx */ + + + + /* Get the PLLI2S Clock configuration --------------------------------------*/ + PeriphClkInit->PLLI2S.PLLI2SM = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM) >> RCC_PLLI2SCFGR_PLLI2SM_Pos); + PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos); + PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); + PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); +#if defined(STM32F413xx) || defined(STM32F423xx) + /* Get the PLL/PLLI2S division factors -------------------------------------*/ + PeriphClkInit->PLLI2SDivR = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVR) >> RCC_DCKCFGR_PLLI2SDIVR_Pos); + PeriphClkInit->PLLDivR = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLDIVR) >> RCC_DCKCFGR_PLLDIVR_Pos); +#endif /* STM32F413xx || STM32F423xx */ + + /* Get the I2S APB1 clock configuration ------------------------------------*/ + PeriphClkInit->I2sApb1ClockSelection = __HAL_RCC_GET_I2S_APB1_SOURCE(); + + /* Get the I2S APB2 clock configuration ------------------------------------*/ + PeriphClkInit->I2sApb2ClockSelection = __HAL_RCC_GET_I2S_APB2_SOURCE(); + + /* Get the RTC Clock configuration -----------------------------------------*/ + tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE); + PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL)); + + /* Get the FMPI2C1 clock configuration -------------------------------------*/ + PeriphClkInit->Fmpi2c1ClockSelection = __HAL_RCC_GET_FMPI2C1_SOURCE(); + + /* Get the CLK48 clock configuration ---------------------------------------*/ + PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE(); + + /* Get the SDIO clock configuration ----------------------------------------*/ + PeriphClkInit->SdioClockSelection = __HAL_RCC_GET_SDIO_SOURCE(); + + /* Get the DFSDM1 clock configuration --------------------------------------*/ + PeriphClkInit->Dfsdm1ClockSelection = __HAL_RCC_GET_DFSDM1_SOURCE(); + + /* Get the DFSDM1 Audio clock configuration --------------------------------*/ + PeriphClkInit->Dfsdm1AudioClockSelection = __HAL_RCC_GET_DFSDM1AUDIO_SOURCE(); + +#if defined(STM32F413xx) || defined(STM32F423xx) + /* Get the DFSDM2 clock configuration --------------------------------------*/ + PeriphClkInit->Dfsdm2ClockSelection = __HAL_RCC_GET_DFSDM2_SOURCE(); + + /* Get the DFSDM2 Audio clock configuration --------------------------------*/ + PeriphClkInit->Dfsdm2AudioClockSelection = __HAL_RCC_GET_DFSDM2AUDIO_SOURCE(); + + /* Get the LPTIM1 clock configuration --------------------------------------*/ + PeriphClkInit->Lptim1ClockSelection = __HAL_RCC_GET_LPTIM1_SOURCE(); + + /* Get the SAI1 Block Aclock configuration ---------------------------------*/ + PeriphClkInit->SaiAClockSelection = __HAL_RCC_GET_SAI_BLOCKA_SOURCE(); + + /* Get the SAI1 Block B clock configuration --------------------------------*/ + PeriphClkInit->SaiBClockSelection = __HAL_RCC_GET_SAI_BLOCKB_SOURCE(); +#endif /* STM32F413xx || STM32F423xx */ + + /* Get the TIM Prescaler configuration -------------------------------------*/ + if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET) + { + PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; + } + else + { + PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; + } +} + +/** + * @brief Return the peripheral clock frequency for a given peripheral(I2S..) + * @note Return 0 if peripheral clock identifier not managed by this API + * @param PeriphClk Peripheral clock identifier + * This parameter can be one of the following values: + * @arg RCC_PERIPHCLK_I2S_APB1: I2S APB1 peripheral clock + * @arg RCC_PERIPHCLK_I2S_APB2: I2S APB2 peripheral clock + * @retval Frequency in KHz + */ +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) +{ + /* This variable used to store the I2S clock frequency (value in Hz) */ + uint32_t frequency = 0U; + /* This variable used to store the VCO Input (value in Hz) */ + uint32_t vcoinput = 0U; + uint32_t srcclk = 0U; + /* This variable used to store the VCO Output (value in Hz) */ + uint32_t vcooutput = 0U; + switch (PeriphClk) + { + case RCC_PERIPHCLK_I2S_APB1: + { + /* Get the current I2S source */ + srcclk = __HAL_RCC_GET_I2S_APB1_SOURCE(); + switch (srcclk) + { + /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ + case RCC_I2SAPB1CLKSOURCE_EXT: + { + /* Set the I2S clock to the external clock value */ + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ + case RCC_I2SAPB1CLKSOURCE_PLLI2S: + { + if((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SSRC) == RCC_PLLI2SCFGR_PLLI2SSRC) + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(EXTERNAL_CLOCK_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); + } + else + { + /* Configure the PLLI2S division factor */ + /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ + if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); + } + else + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); + } + } + /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ + vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); + /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ + frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); + break; + } + /* Check if I2S clock selection is PLL VCO Output divided by PLLR used as I2S clock */ + case RCC_I2SAPB1CLKSOURCE_PLLR: + { + /* Configure the PLL division factor R */ + /* PLL_VCO Input = PLL_SOURCE/PLLM */ + if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); + } + else + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); + } + + /* PLL_VCO Output = PLL_VCO Input * PLLN */ + vcooutput = (uint32_t)(vcoinput * (((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U) & (RCC_PLLCFGR_PLLN >> 6U))); + /* I2S_CLK = PLL_VCO Output/PLLR */ + frequency = (uint32_t)(vcooutput /(((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U) & (RCC_PLLCFGR_PLLR >> 28U))); + break; + } + /* Check if I2S clock selection is HSI or HSE depending from PLL source Clock */ + case RCC_I2SAPB1CLKSOURCE_PLLSRC: + { + if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) + { + frequency = HSE_VALUE; + } + else + { + frequency = HSI_VALUE; + } + break; + } + /* Clock not enabled for I2S*/ + default: + { + frequency = 0U; + break; + } + } + break; + } + case RCC_PERIPHCLK_I2S_APB2: + { + /* Get the current I2S source */ + srcclk = __HAL_RCC_GET_I2S_APB2_SOURCE(); + switch (srcclk) + { + /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ + case RCC_I2SAPB2CLKSOURCE_EXT: + { + /* Set the I2S clock to the external clock value */ + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ + case RCC_I2SAPB2CLKSOURCE_PLLI2S: + { + if((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SSRC) == RCC_PLLI2SCFGR_PLLI2SSRC) + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(EXTERNAL_CLOCK_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); + } + else + { + /* Configure the PLLI2S division factor */ + /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ + if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); + } + else + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); + } + } + /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ + vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); + /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ + frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); + break; + } + /* Check if I2S clock selection is PLL VCO Output divided by PLLR used as I2S clock */ + case RCC_I2SAPB2CLKSOURCE_PLLR: + { + /* Configure the PLL division factor R */ + /* PLL_VCO Input = PLL_SOURCE/PLLM */ + if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); + } + else + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); + } + + /* PLL_VCO Output = PLL_VCO Input * PLLN */ + vcooutput = (uint32_t)(vcoinput * (((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U) & (RCC_PLLCFGR_PLLN >> 6U))); + /* I2S_CLK = PLL_VCO Output/PLLR */ + frequency = (uint32_t)(vcooutput /(((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U) & (RCC_PLLCFGR_PLLR >> 28U))); + break; + } + /* Check if I2S clock selection is HSI or HSE depending from PLL source Clock */ + case RCC_I2SAPB2CLKSOURCE_PLLSRC: + { + if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) + { + frequency = HSE_VALUE; + } + else + { + frequency = HSI_VALUE; + } + break; + } + /* Clock not enabled for I2S*/ + default: + { + frequency = 0U; + break; + } + } + break; + } + } + return frequency; +} +#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ + +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) +/** + * @brief Initializes the RCC extended peripherals clocks according to the specified parameters in the + * RCC_PeriphCLKInitTypeDef. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * contains the configuration information for the Extended Peripherals clocks(I2S and RTC clocks). + * + * @note A caution to be taken when HAL_RCCEx_PeriphCLKConfig() is used to select RTC clock selection, in this case + * the Reset of Backup domain will be applied in order to modify the RTC Clock source as consequence all backup + * domain (RTC and RCC_BDCR register expect BKPSRAM) will be reset + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tickstart = 0U; + uint32_t tmpreg1 = 0U; + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); + + /*---------------------------- RTC configuration ---------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) + { + /* Check for RTC Parameters used to output RTCCLK */ + assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); + + /* Enable Power Clock*/ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* Enable write access to Backup domain */ + PWR->CR |= PWR_CR_DBP; + + /* Get tick */ + tickstart = HAL_GetTick(); + + while((PWR->CR & PWR_CR_DBP) == RESET) + { + if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ + tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL); + if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) + { + /* Store the content of BDCR register before the reset of Backup Domain */ + tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); + /* RTC Clock selection can be changed only if the Backup Domain is reset */ + __HAL_RCC_BACKUPRESET_FORCE(); + __HAL_RCC_BACKUPRESET_RELEASE(); + /* Restore the Content of BDCR register */ + RCC->BDCR = tmpreg1; + + /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ + if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON)) + { + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); + } + /*--------------------------------------------------------------------------*/ + + /*---------------------------- TIM configuration ---------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM)) + { + __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); + } + /*--------------------------------------------------------------------------*/ + + /*---------------------------- FMPI2C1 Configuration -----------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FMPI2C1) == RCC_PERIPHCLK_FMPI2C1) + { + /* Check the parameters */ + assert_param(IS_RCC_FMPI2C1CLKSOURCE(PeriphClkInit->Fmpi2c1ClockSelection)); + + /* Configure the FMPI2C1 clock source */ + __HAL_RCC_FMPI2C1_CONFIG(PeriphClkInit->Fmpi2c1ClockSelection); + } + /*--------------------------------------------------------------------------*/ + + /*---------------------------- LPTIM1 Configuration ------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) + { + /* Check the parameters */ + assert_param(IS_RCC_LPTIM1CLKSOURCE(PeriphClkInit->Lptim1ClockSelection)); + + /* Configure the LPTIM1 clock source */ + __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection); + } + + /*---------------------------- I2S Configuration ---------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) + { + /* Check the parameters */ + assert_param(IS_RCC_I2SAPBCLKSOURCE(PeriphClkInit->I2SClockSelection)); + + /* Configure the I2S clock source */ + __HAL_RCC_I2S_CONFIG(PeriphClkInit->I2SClockSelection); + } + + return HAL_OK; +} + +/** + * @brief Configures the RCC_OscInitStruct according to the internal + * RCC configuration registers. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * will be configured. + * @retval None + */ +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tempreg; + + /* Set all possible values for the extended clock type parameter------------*/ + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_FMPI2C1 | RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC; + + tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE); + PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL)); + + if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET) + { + PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; + } + else + { + PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; + } + /* Get the FMPI2C1 clock configuration -------------------------------------*/ + PeriphClkInit->Fmpi2c1ClockSelection = __HAL_RCC_GET_FMPI2C1_SOURCE(); + + /* Get the I2S clock configuration -----------------------------------------*/ + PeriphClkInit->I2SClockSelection = __HAL_RCC_GET_I2S_SOURCE(); + + +} +/** + * @brief Return the peripheral clock frequency for a given peripheral(SAI..) + * @note Return 0 if peripheral clock identifier not managed by this API + * @param PeriphClk Peripheral clock identifier + * This parameter can be one of the following values: + * @arg RCC_PERIPHCLK_I2S: I2S peripheral clock + * @retval Frequency in KHz + */ +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) +{ + /* This variable used to store the I2S clock frequency (value in Hz) */ + uint32_t frequency = 0U; + /* This variable used to store the VCO Input (value in Hz) */ + uint32_t vcoinput = 0U; + uint32_t srcclk = 0U; + /* This variable used to store the VCO Output (value in Hz) */ + uint32_t vcooutput = 0U; + switch (PeriphClk) + { + case RCC_PERIPHCLK_I2S: + { + /* Get the current I2S source */ + srcclk = __HAL_RCC_GET_I2S_SOURCE(); + switch (srcclk) + { + /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ + case RCC_I2SAPBCLKSOURCE_EXT: + { + /* Set the I2S clock to the external clock value */ + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + /* Check if I2S clock selection is PLL VCO Output divided by PLLR used as I2S clock */ + case RCC_I2SAPBCLKSOURCE_PLLR: + { + /* Configure the PLL division factor R */ + /* PLL_VCO Input = PLL_SOURCE/PLLM */ + if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); + } + else + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); + } + + /* PLL_VCO Output = PLL_VCO Input * PLLN */ + vcooutput = (uint32_t)(vcoinput * (((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6U) & (RCC_PLLCFGR_PLLN >> 6U))); + /* I2S_CLK = PLL_VCO Output/PLLR */ + frequency = (uint32_t)(vcooutput /(((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28U) & (RCC_PLLCFGR_PLLR >> 28U))); + break; + } + /* Check if I2S clock selection is HSI or HSE depending from PLL source Clock */ + case RCC_I2SAPBCLKSOURCE_PLLSRC: + { + if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) + { + frequency = HSE_VALUE; + } + else + { + frequency = HSI_VALUE; + } + break; + } + /* Clock not enabled for I2S*/ + default: + { + frequency = 0U; + break; + } + } + break; + } + } + return frequency; +} +#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) +/** + * @brief Initializes the RCC extended peripherals clocks according to the specified + * parameters in the RCC_PeriphCLKInitTypeDef. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * contains the configuration information for the Extended Peripherals + * clocks(I2S, SAI, LTDC RTC and TIM). + * + * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select + * the RTC clock source; in this case the Backup domain will be reset in + * order to modify the RTC Clock source, as consequence RTC registers (including + * the backup registers) and RCC_BDCR register are set to their reset values. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tickstart = 0U; + uint32_t tmpreg1 = 0U; + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); + + /*----------------------- SAI/I2S Configuration (PLLI2S) -------------------*/ + /*----------------------- Common configuration SAI/I2S ---------------------*/ + /* In Case of SAI or I2S Clock Configuration through PLLI2S, PLLI2SN division + factor is common parameters for both peripherals */ + if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || + (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == RCC_PERIPHCLK_SAI_PLLI2S) || + (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S)) + { + /* check for Parameters */ + assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN)); + + /* Disable the PLLI2S */ + __HAL_RCC_PLLI2S_DISABLE(); + /* Get tick */ + tickstart = HAL_GetTick(); + /* Wait till PLLI2S is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) + { + /* return in case of Timeout detected */ + return HAL_TIMEOUT; + } + } + + /*---------------------------- I2S configuration -------------------------*/ + /* In Case of I2S Clock Configuration through PLLI2S, PLLI2SR must be added + only for I2S configuration */ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S)) + { + /* check for Parameters */ + assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); + /* Configure the PLLI2S division factors */ + /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLM) */ + /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */ + __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SR); + } + + /*---------------------------- SAI configuration -------------------------*/ + /* In Case of SAI Clock Configuration through PLLI2S, PLLI2SQ and PLLI2S_DIVQ must + be added only for SAI configuration */ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == (RCC_PERIPHCLK_SAI_PLLI2S)) + { + /* Check the PLLI2S division factors */ + assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); + assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ)); + + /* Read PLLI2SR value from PLLI2SCFGR register (this value is not need for SAI configuration) */ + tmpreg1 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); + /* Configure the PLLI2S division factors */ + /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */ + /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ + /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */ + __HAL_RCC_PLLI2S_SAICLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ , tmpreg1); + /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */ + __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ); + } + + /*----------------- In Case of PLLI2S is just selected -----------------*/ + if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S) + { + /* Check for Parameters */ + assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ)); + assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); + + /* Configure the PLLI2S multiplication and division factors */ + __HAL_RCC_PLLI2S_SAICLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN, PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR); + } + + /* Enable the PLLI2S */ + __HAL_RCC_PLLI2S_ENABLE(); + /* Get tick */ + tickstart = HAL_GetTick(); + /* Wait till PLLI2S is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) + { + /* return in case of Timeout detected */ + return HAL_TIMEOUT; + } + } + } + /*--------------------------------------------------------------------------*/ + + /*----------------------- SAI/LTDC Configuration (PLLSAI) ------------------*/ + /*----------------------- Common configuration SAI/LTDC --------------------*/ + /* In Case of SAI or LTDC Clock Configuration through PLLSAI, PLLSAIN division + factor is common parameters for both peripherals */ + if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == RCC_PERIPHCLK_SAI_PLLSAI) || + (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC)) + { + /* Check the PLLSAI division factors */ + assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN)); + + /* Disable PLLSAI Clock */ + __HAL_RCC_PLLSAI_DISABLE(); + /* Get tick */ + tickstart = HAL_GetTick(); + /* Wait till PLLSAI is disabled */ + while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET) + { + if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) + { + /* return in case of Timeout detected */ + return HAL_TIMEOUT; + } + } + + /*---------------------------- SAI configuration -------------------------*/ + /* In Case of SAI Clock Configuration through PLLSAI, PLLSAIQ and PLLSAI_DIVQ must + be added only for SAI configuration */ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == (RCC_PERIPHCLK_SAI_PLLSAI)) + { + assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ)); + assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ)); + + /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */ + tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> RCC_PLLSAICFGR_PLLSAIR_Pos); + /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ + /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ + /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */ + __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , PeriphClkInit->PLLSAI.PLLSAIQ, tmpreg1); + /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */ + __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ); + } + + /*---------------------------- LTDC configuration ------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == (RCC_PERIPHCLK_LTDC)) + { + assert_param(IS_RCC_PLLSAIR_VALUE(PeriphClkInit->PLLSAI.PLLSAIR)); + assert_param(IS_RCC_PLLSAI_DIVR_VALUE(PeriphClkInit->PLLSAIDivR)); + + /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */ + tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); + /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */ + /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */ + /* LTDC_CLK(first level) = PLLSAI_VCO Output/PLLSAIR */ + __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , tmpreg1, PeriphClkInit->PLLSAI.PLLSAIR); + /* LTDC_CLK = LTDC_CLK(first level)/PLLSAIDIVR */ + __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLSAIDivR); + } + /* Enable PLLSAI Clock */ + __HAL_RCC_PLLSAI_ENABLE(); + /* Get tick */ + tickstart = HAL_GetTick(); + /* Wait till PLLSAI is ready */ + while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET) + { + if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) + { + /* return in case of Timeout detected */ + return HAL_TIMEOUT; + } + } + } + /*--------------------------------------------------------------------------*/ + + /*---------------------------- RTC configuration ---------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) + { + /* Check for RTC Parameters used to output RTCCLK */ + assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); + + /* Enable Power Clock*/ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* Enable write access to Backup domain */ + PWR->CR |= PWR_CR_DBP; + + /* Get tick */ + tickstart = HAL_GetTick(); + + while((PWR->CR & PWR_CR_DBP) == RESET) + { + if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ + tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL); + if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) + { + /* Store the content of BDCR register before the reset of Backup Domain */ + tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); + /* RTC Clock selection can be changed only if the Backup Domain is reset */ + __HAL_RCC_BACKUPRESET_FORCE(); + __HAL_RCC_BACKUPRESET_RELEASE(); + /* Restore the Content of BDCR register */ + RCC->BDCR = tmpreg1; + + /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ + if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON)) + { + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); + } + /*--------------------------------------------------------------------------*/ + + /*---------------------------- TIM configuration ---------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM)) + { + __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); + } + return HAL_OK; +} + +/** + * @brief Configures the PeriphClkInit according to the internal + * RCC configuration registers. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * will be configured. + * @retval None + */ +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tempreg; + + /* Set all possible values for the extended clock type parameter------------*/ + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_SAI_PLLSAI | RCC_PERIPHCLK_SAI_PLLI2S | RCC_PERIPHCLK_LTDC | RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC; + + /* Get the PLLI2S Clock configuration -----------------------------------------------*/ + PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos); + PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); + PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos); + /* Get the PLLSAI Clock configuration -----------------------------------------------*/ + PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> RCC_PLLSAICFGR_PLLSAIN_Pos); + PeriphClkInit->PLLSAI.PLLSAIR = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> RCC_PLLSAICFGR_PLLSAIR_Pos); + PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> RCC_PLLSAICFGR_PLLSAIQ_Pos); + /* Get the PLLSAI/PLLI2S division factors -----------------------------------------------*/ + PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) >> RCC_DCKCFGR_PLLI2SDIVQ_Pos); + PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> RCC_DCKCFGR_PLLSAIDIVQ_Pos); + PeriphClkInit->PLLSAIDivR = (uint32_t)(RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVR); + /* Get the RTC Clock configuration -----------------------------------------------*/ + tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE); + PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL)); + + if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET) + { + PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; + } + else + { + PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; + } +} + +/** + * @brief Return the peripheral clock frequency for a given peripheral(SAI..) + * @note Return 0 if peripheral clock identifier not managed by this API + * @param PeriphClk Peripheral clock identifier + * This parameter can be one of the following values: + * @arg RCC_PERIPHCLK_I2S: I2S peripheral clock + * @retval Frequency in KHz + */ +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) +{ + /* This variable used to store the I2S clock frequency (value in Hz) */ + uint32_t frequency = 0U; + /* This variable used to store the VCO Input (value in Hz) */ + uint32_t vcoinput = 0U; + uint32_t srcclk = 0U; + /* This variable used to store the VCO Output (value in Hz) */ + uint32_t vcooutput = 0U; + switch (PeriphClk) + { + case RCC_PERIPHCLK_I2S: + { + /* Get the current I2S source */ + srcclk = __HAL_RCC_GET_I2S_SOURCE(); + switch (srcclk) + { + /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ + case RCC_I2SCLKSOURCE_EXT: + { + /* Set the I2S clock to the external clock value */ + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ + case RCC_I2SCLKSOURCE_PLLI2S: + { + /* Configure the PLLI2S division factor */ + /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */ + if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); + } + else + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); + } + + /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ + vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); + /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ + frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); + break; + } + /* Clock not enabled for I2S*/ + default: + { + frequency = 0U; + break; + } + } + break; + } + } + return frequency; +} +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\ + defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) +/** + * @brief Initializes the RCC extended peripherals clocks according to the specified parameters in the + * RCC_PeriphCLKInitTypeDef. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * contains the configuration information for the Extended Peripherals clocks(I2S and RTC clocks). + * + * @note A caution to be taken when HAL_RCCEx_PeriphCLKConfig() is used to select RTC clock selection, in this case + * the Reset of Backup domain will be applied in order to modify the RTC Clock source as consequence all backup + * domain (RTC and RCC_BDCR register expect BKPSRAM) will be reset + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tickstart = 0U; + uint32_t tmpreg1 = 0U; + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); + + /*---------------------------- I2S configuration ---------------------------*/ + if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || + (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S)) + { + /* check for Parameters */ + assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR)); + assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN)); +#if defined(STM32F411xE) + assert_param(IS_RCC_PLLI2SM_VALUE(PeriphClkInit->PLLI2S.PLLI2SM)); +#endif /* STM32F411xE */ + /* Disable the PLLI2S */ + __HAL_RCC_PLLI2S_DISABLE(); + /* Get tick */ + tickstart = HAL_GetTick(); + /* Wait till PLLI2S is disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) + { + /* return in case of Timeout detected */ + return HAL_TIMEOUT; + } + } + +#if defined(STM32F411xE) + /* Configure the PLLI2S division factors */ + /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */ + /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */ + __HAL_RCC_PLLI2S_I2SCLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN, PeriphClkInit->PLLI2S.PLLI2SR); +#else + /* Configure the PLLI2S division factors */ + /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLM) */ + /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */ + __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SR); +#endif /* STM32F411xE */ + + /* Enable the PLLI2S */ + __HAL_RCC_PLLI2S_ENABLE(); + /* Get tick */ + tickstart = HAL_GetTick(); + /* Wait till PLLI2S is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) + { + /* return in case of Timeout detected */ + return HAL_TIMEOUT; + } + } + } + + /*---------------------------- RTC configuration ---------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC)) + { + /* Check for RTC Parameters used to output RTCCLK */ + assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); + + /* Enable Power Clock*/ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* Enable write access to Backup domain */ + PWR->CR |= PWR_CR_DBP; + + /* Get tick */ + tickstart = HAL_GetTick(); + + while((PWR->CR & PWR_CR_DBP) == RESET) + { + if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ + tmpreg1 = (RCC->BDCR & RCC_BDCR_RTCSEL); + if((tmpreg1 != 0x00000000U) && ((tmpreg1) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) + { + /* Store the content of BDCR register before the reset of Backup Domain */ + tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); + /* RTC Clock selection can be changed only if the Backup Domain is reset */ + __HAL_RCC_BACKUPRESET_FORCE(); + __HAL_RCC_BACKUPRESET_RELEASE(); + /* Restore the Content of BDCR register */ + RCC->BDCR = tmpreg1; + + /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ + if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSEON)) + { + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); + } +#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) + /*---------------------------- TIM configuration ---------------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM)) + { + __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); + } +#endif /* STM32F401xC || STM32F401xE || STM32F411xE */ + return HAL_OK; +} + +/** + * @brief Configures the RCC_OscInitStruct according to the internal + * RCC configuration registers. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * will be configured. + * @retval None + */ +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tempreg; + + /* Set all possible values for the extended clock type parameter------------*/ + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_RTC; + + /* Get the PLLI2S Clock configuration --------------------------------------*/ + PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos); + PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> RCC_PLLI2SCFGR_PLLI2SR_Pos); +#if defined(STM32F411xE) + PeriphClkInit->PLLI2S.PLLI2SM = (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM); +#endif /* STM32F411xE */ + /* Get the RTC Clock configuration -----------------------------------------*/ + tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE); + PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL)); + +#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) + /* Get the TIM Prescaler configuration -------------------------------------*/ + if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET) + { + PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; + } + else + { + PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; + } +#endif /* STM32F401xC || STM32F401xE || STM32F411xE */ +} + +/** + * @brief Return the peripheral clock frequency for a given peripheral(SAI..) + * @note Return 0 if peripheral clock identifier not managed by this API + * @param PeriphClk Peripheral clock identifier + * This parameter can be one of the following values: + * @arg RCC_PERIPHCLK_I2S: I2S peripheral clock + * @retval Frequency in KHz + */ +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) +{ + /* This variable used to store the I2S clock frequency (value in Hz) */ + uint32_t frequency = 0U; + /* This variable used to store the VCO Input (value in Hz) */ + uint32_t vcoinput = 0U; + uint32_t srcclk = 0U; + /* This variable used to store the VCO Output (value in Hz) */ + uint32_t vcooutput = 0U; + switch (PeriphClk) + { + case RCC_PERIPHCLK_I2S: + { + /* Get the current I2S source */ + srcclk = __HAL_RCC_GET_I2S_SOURCE(); + switch (srcclk) + { + /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin used as I2S clock */ + case RCC_I2SCLKSOURCE_EXT: + { + /* Set the I2S clock to the external clock value */ + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + /* Check if I2S clock selection is PLLI2S VCO output clock divided by PLLI2SR used as I2S clock */ + case RCC_I2SCLKSOURCE_PLLI2S: + { +#if defined(STM32F411xE) + /* Configure the PLLI2S division factor */ + /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */ + if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); + } + else + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)); + } +#else + /* Configure the PLLI2S division factor */ + /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */ + if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE) + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); + } + else + { + /* Get the I2S source clock value */ + vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)); + } +#endif /* STM32F411xE */ + /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */ + vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6U) & (RCC_PLLI2SCFGR_PLLI2SN >> 6U))); + /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */ + frequency = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28U) & (RCC_PLLI2SCFGR_PLLI2SR >> 28U))); + break; + } + /* Clock not enabled for I2S*/ + default: + { + frequency = 0U; + break; + } + } + break; + } + } + return frequency; +} +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */ + +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\ + defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +/** + * @brief Select LSE mode + * + * @note This mode is only available for STM32F410xx/STM32F411xx/STM32F446xx/STM32F469xx/STM32F479xx/STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices. + * + * @param Mode specifies the LSE mode. + * This parameter can be one of the following values: + * @arg RCC_LSE_LOWPOWER_MODE: LSE oscillator in low power mode selection + * @arg RCC_LSE_HIGHDRIVE_MODE: LSE oscillator in High Drive mode selection + * @retval None + */ +void HAL_RCCEx_SelectLSEMode(uint8_t Mode) +{ + /* Check the parameters */ + assert_param(IS_RCC_LSE_MODE(Mode)); + if(Mode == RCC_LSE_HIGHDRIVE_MODE) + { + SET_BIT(RCC->BDCR, RCC_BDCR_LSEMOD); + } + else + { + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEMOD); + } +} + +#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ + +/** @defgroup RCCEx_Exported_Functions_Group2 Extended Clock management functions + * @brief Extended Clock management functions + * +@verbatim + =============================================================================== + ##### Extended clock management functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the + activation or deactivation of PLLI2S, PLLSAI. +@endverbatim + * @{ + */ + +#if defined(RCC_PLLI2S_SUPPORT) +/** + * @brief Enable PLLI2S. + * @param PLLI2SInit pointer to an RCC_PLLI2SInitTypeDef structure that + * contains the configuration information for the PLLI2S + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_EnablePLLI2S(RCC_PLLI2SInitTypeDef *PLLI2SInit) +{ + uint32_t tickstart; + + /* Check for parameters */ + assert_param(IS_RCC_PLLI2SN_VALUE(PLLI2SInit->PLLI2SN)); + assert_param(IS_RCC_PLLI2SR_VALUE(PLLI2SInit->PLLI2SR)); +#if defined(RCC_PLLI2SCFGR_PLLI2SM) + assert_param(IS_RCC_PLLI2SM_VALUE(PLLI2SInit->PLLI2SM)); +#endif /* RCC_PLLI2SCFGR_PLLI2SM */ +#if defined(RCC_PLLI2SCFGR_PLLI2SP) + assert_param(IS_RCC_PLLI2SP_VALUE(PLLI2SInit->PLLI2SP)); +#endif /* RCC_PLLI2SCFGR_PLLI2SP */ +#if defined(RCC_PLLI2SCFGR_PLLI2SQ) + assert_param(IS_RCC_PLLI2SQ_VALUE(PLLI2SInit->PLLI2SQ)); +#endif /* RCC_PLLI2SCFGR_PLLI2SQ */ + + /* Disable the PLLI2S */ + __HAL_RCC_PLLI2S_DISABLE(); + + /* Wait till PLLI2S is disabled */ + tickstart = HAL_GetTick(); + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) + { + /* return in case of Timeout detected */ + return HAL_TIMEOUT; + } + } + + /* Configure the PLLI2S division factors */ +#if defined(STM32F446xx) + /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */ + /* I2SPCLK = PLLI2S_VCO / PLLI2SP */ + /* I2SQCLK = PLLI2S_VCO / PLLI2SQ */ + /* I2SRCLK = PLLI2S_VCO / PLLI2SR */ + __HAL_RCC_PLLI2S_CONFIG(PLLI2SInit->PLLI2SM, PLLI2SInit->PLLI2SN, \ + PLLI2SInit->PLLI2SP, PLLI2SInit->PLLI2SQ, PLLI2SInit->PLLI2SR); +#elif defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ + defined(STM32F413xx) || defined(STM32F423xx) + /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM)*/ + /* I2SQCLK = PLLI2S_VCO / PLLI2SQ */ + /* I2SRCLK = PLLI2S_VCO / PLLI2SR */ + __HAL_RCC_PLLI2S_CONFIG(PLLI2SInit->PLLI2SM, PLLI2SInit->PLLI2SN, \ + PLLI2SInit->PLLI2SQ, PLLI2SInit->PLLI2SR); +#elif defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ + defined(STM32F469xx) || defined(STM32F479xx) + /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * PLLI2SN */ + /* I2SQCLK = PLLI2S_VCO / PLLI2SQ */ + /* I2SRCLK = PLLI2S_VCO / PLLI2SR */ + __HAL_RCC_PLLI2S_SAICLK_CONFIG(PLLI2SInit->PLLI2SN, PLLI2SInit->PLLI2SQ, PLLI2SInit->PLLI2SR); +#elif defined(STM32F411xE) + /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) * (PLLI2SN/PLLI2SM) */ + /* I2SRCLK = PLLI2S_VCO / PLLI2SR */ + __HAL_RCC_PLLI2S_I2SCLK_CONFIG(PLLI2SInit->PLLI2SM, PLLI2SInit->PLLI2SN, PLLI2SInit->PLLI2SR); +#else + /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x PLLI2SN */ + /* I2SRCLK = PLLI2S_VCO / PLLI2SR */ + __HAL_RCC_PLLI2S_CONFIG(PLLI2SInit->PLLI2SN, PLLI2SInit->PLLI2SR); +#endif /* STM32F446xx */ + + /* Enable the PLLI2S */ + __HAL_RCC_PLLI2S_ENABLE(); + + /* Wait till PLLI2S is ready */ + tickstart = HAL_GetTick(); + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) + { + /* return in case of Timeout detected */ + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @brief Disable PLLI2S. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_DisablePLLI2S(void) +{ + uint32_t tickstart; + + /* Disable the PLLI2S */ + __HAL_RCC_PLLI2S_DISABLE(); + + /* Wait till PLLI2S is disabled */ + tickstart = HAL_GetTick(); + while(READ_BIT(RCC->CR, RCC_CR_PLLI2SRDY) != RESET) + { + if((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE) + { + /* return in case of Timeout detected */ + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +#endif /* RCC_PLLI2S_SUPPORT */ + +#if defined(RCC_PLLSAI_SUPPORT) +/** + * @brief Enable PLLSAI. + * @param PLLSAIInit pointer to an RCC_PLLSAIInitTypeDef structure that + * contains the configuration information for the PLLSAI + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI(RCC_PLLSAIInitTypeDef *PLLSAIInit) +{ + uint32_t tickstart; + + /* Check for parameters */ + assert_param(IS_RCC_PLLSAIN_VALUE(PLLSAIInit->PLLSAIN)); + assert_param(IS_RCC_PLLSAIQ_VALUE(PLLSAIInit->PLLSAIQ)); +#if defined(RCC_PLLSAICFGR_PLLSAIM) + assert_param(IS_RCC_PLLSAIM_VALUE(PLLSAIInit->PLLSAIM)); +#endif /* RCC_PLLSAICFGR_PLLSAIM */ +#if defined(RCC_PLLSAICFGR_PLLSAIP) + assert_param(IS_RCC_PLLSAIP_VALUE(PLLSAIInit->PLLSAIP)); +#endif /* RCC_PLLSAICFGR_PLLSAIP */ +#if defined(RCC_PLLSAICFGR_PLLSAIR) + assert_param(IS_RCC_PLLSAIR_VALUE(PLLSAIInit->PLLSAIR)); +#endif /* RCC_PLLSAICFGR_PLLSAIR */ + + /* Disable the PLLSAI */ + __HAL_RCC_PLLSAI_DISABLE(); + + /* Wait till PLLSAI is disabled */ + tickstart = HAL_GetTick(); + while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET) + { + if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) + { + /* return in case of Timeout detected */ + return HAL_TIMEOUT; + } + } + + /* Configure the PLLSAI division factors */ +#if defined(STM32F446xx) + /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) * (PLLSAIN/PLLSAIM) */ + /* SAIPCLK = PLLSAI_VCO / PLLSAIP */ + /* SAIQCLK = PLLSAI_VCO / PLLSAIQ */ + /* SAIRCLK = PLLSAI_VCO / PLLSAIR */ + __HAL_RCC_PLLSAI_CONFIG(PLLSAIInit->PLLSAIM, PLLSAIInit->PLLSAIN, \ + PLLSAIInit->PLLSAIP, PLLSAIInit->PLLSAIQ, 0U); +#elif defined(STM32F469xx) || defined(STM32F479xx) + /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) * PLLSAIN */ + /* SAIPCLK = PLLSAI_VCO / PLLSAIP */ + /* SAIQCLK = PLLSAI_VCO / PLLSAIQ */ + /* SAIRCLK = PLLSAI_VCO / PLLSAIR */ + __HAL_RCC_PLLSAI_CONFIG(PLLSAIInit->PLLSAIN, PLLSAIInit->PLLSAIP, \ + PLLSAIInit->PLLSAIQ, PLLSAIInit->PLLSAIR); +#else + /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) x PLLSAIN */ + /* SAIQCLK = PLLSAI_VCO / PLLSAIQ */ + /* SAIRCLK = PLLSAI_VCO / PLLSAIR */ + __HAL_RCC_PLLSAI_CONFIG(PLLSAIInit->PLLSAIN, PLLSAIInit->PLLSAIQ, PLLSAIInit->PLLSAIR); +#endif /* STM32F446xx */ + + /* Enable the PLLSAI */ + __HAL_RCC_PLLSAI_ENABLE(); + + /* Wait till PLLSAI is ready */ + tickstart = HAL_GetTick(); + while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET) + { + if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE) + { + /* return in case of Timeout detected */ + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @brief Disable PLLSAI. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI(void) +{ + uint32_t tickstart; + + /* Disable the PLLSAI */ + __HAL_RCC_PLLSAI_DISABLE(); + + /* Wait till PLLSAI is disabled */ + tickstart = HAL_GetTick(); + while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET) + { + if((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE) + { + /* return in case of Timeout detected */ + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +#endif /* RCC_PLLSAI_SUPPORT */ + +/** + * @} + */ + +#if defined(STM32F446xx) +/** + * @brief Returns the SYSCLK frequency + * + * @note This function implementation is valid only for STM32F446xx devices. + * @note This function add the PLL/PLLR System clock source + * + * @note The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*) + * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**) + * @note If SYSCLK source is PLL or PLLR, function returns values based on HSE_VALUE(**) + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * @note (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * @note (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value + * 25 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * @note The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @note This function can be used by the user application to compute the + * baudrate for the communication peripherals or configure other parameters. + * + * @note Each time SYSCLK changes, this function must be called to update the + * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * + * @retval SYSCLK frequency + */ +uint32_t HAL_RCC_GetSysClockFreq(void) +{ + uint32_t pllm = 0U; + uint32_t pllvco = 0U; + uint32_t pllp = 0U; + uint32_t pllr = 0U; + uint32_t sysclockfreq = 0U; + + /* Get SYSCLK source -------------------------------------------------------*/ + switch (RCC->CFGR & RCC_CFGR_SWS) + { + case RCC_CFGR_SWS_HSI: /* HSI used as system clock source */ + { + sysclockfreq = HSI_VALUE; + break; + } + case RCC_CFGR_SWS_HSE: /* HSE used as system clock source */ + { + sysclockfreq = HSE_VALUE; + break; + } + case RCC_CFGR_SWS_PLL: /* PLL/PLLP used as system clock source */ + { + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN + SYSCLK = PLL_VCO / PLLP */ + pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; + if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI) + { + /* HSE used as PLL clock source */ + pllvco = (uint32_t) ((((uint64_t) HSE_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm); + } + else + { + /* HSI used as PLL clock source */ + pllvco = (uint32_t) ((((uint64_t) HSI_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm); + } + pllp = ((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> RCC_PLLCFGR_PLLP_Pos) + 1U) *2U); + + sysclockfreq = pllvco/pllp; + break; + } + case RCC_CFGR_SWS_PLLR: /* PLL/PLLR used as system clock source */ + { + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN + SYSCLK = PLL_VCO / PLLR */ + pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; + if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI) + { + /* HSE used as PLL clock source */ + pllvco = (uint32_t) ((((uint64_t) HSE_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm); + } + else + { + /* HSI used as PLL clock source */ + pllvco = (uint32_t) ((((uint64_t) HSI_VALUE * ((uint64_t) ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)))) / (uint64_t)pllm); + } + pllr = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos); + + sysclockfreq = pllvco/pllr; + break; + } + default: + { + sysclockfreq = HSI_VALUE; + break; + } + } + return sysclockfreq; +} +#endif /* STM32F446xx */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @brief Resets the RCC clock configuration to the default reset state. + * @note The default reset state of the clock configuration is given below: + * - HSI ON and used as system clock source + * - HSE, PLL, PLLI2S and PLLSAI OFF + * - AHB, APB1 and APB2 prescaler set to 1. + * - CSS, MCO1 and MCO2 OFF + * - All interrupts disabled + * @note This function doesn't modify the configuration of the + * - Peripheral clocks + * - LSI, LSE and RTC clocks + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_DeInit(void) +{ + uint32_t tickstart; + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Set HSION bit to the reset value */ + SET_BIT(RCC->CR, RCC_CR_HSION); + + /* Wait till HSI is ready */ + while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Set HSITRIM[4:0] bits to the reset value */ + SET_BIT(RCC->CR, RCC_CR_HSITRIM_4); + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Reset CFGR register */ + CLEAR_REG(RCC->CFGR); + + /* Wait till clock switch is ready */ + while (READ_BIT(RCC->CFGR, RCC_CFGR_SWS) != RESET) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Clear HSEON, HSEBYP and CSSON bits */ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_HSEBYP | RCC_CR_CSSON); + + /* Wait till HSE is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_HSERDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Clear PLLON bit */ + CLEAR_BIT(RCC->CR, RCC_CR_PLLON); + + /* Wait till PLL is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_PLLRDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + +#if defined(RCC_PLLI2S_SUPPORT) + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Reset PLLI2SON bit */ + CLEAR_BIT(RCC->CR, RCC_CR_PLLI2SON); + + /* Wait till PLLI2S is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_PLLI2SRDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } +#endif /* RCC_PLLI2S_SUPPORT */ + +#if defined(RCC_PLLSAI_SUPPORT) + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Reset PLLSAI bit */ + CLEAR_BIT(RCC->CR, RCC_CR_PLLSAION); + + /* Wait till PLLSAI is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_PLLSAIRDY) != RESET) + { + if ((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } +#endif /* RCC_PLLSAI_SUPPORT */ + + /* Once PLL, PLLI2S and PLLSAI are OFF, reset PLLCFGR register to default value */ +#if defined(STM32F412Cx) || defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || \ + defined(STM32F423xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) + RCC->PLLCFGR = RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLN_6 | RCC_PLLCFGR_PLLN_7 | RCC_PLLCFGR_PLLQ_2 | RCC_PLLCFGR_PLLR_1; +#elif defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) + RCC->PLLCFGR = RCC_PLLCFGR_PLLR_0 | RCC_PLLCFGR_PLLR_1 | RCC_PLLCFGR_PLLR_2 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLN_6 | RCC_PLLCFGR_PLLN_7 | RCC_PLLCFGR_PLLQ_0 | RCC_PLLCFGR_PLLQ_1 | RCC_PLLCFGR_PLLQ_2 | RCC_PLLCFGR_PLLQ_3; +#else + RCC->PLLCFGR = RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLN_6 | RCC_PLLCFGR_PLLN_7 | RCC_PLLCFGR_PLLQ_2; +#endif /* STM32F412Cx || STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx || STM32F446xx || STM32F469xx || STM32F479xx */ + + /* Reset PLLI2SCFGR register to default value */ +#if defined(STM32F412Cx) || defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || \ + defined(STM32F423xx) || defined(STM32F446xx) + RCC->PLLI2SCFGR = RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SN_6 | RCC_PLLI2SCFGR_PLLI2SN_7 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SR_1; +#elif defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) + RCC->PLLI2SCFGR = RCC_PLLI2SCFGR_PLLI2SN_6 | RCC_PLLI2SCFGR_PLLI2SN_7 | RCC_PLLI2SCFGR_PLLI2SR_1; +#elif defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) + RCC->PLLI2SCFGR = RCC_PLLI2SCFGR_PLLI2SN_6 | RCC_PLLI2SCFGR_PLLI2SN_7 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SR_1; +#elif defined(STM32F411xE) + RCC->PLLI2SCFGR = RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SN_6 | RCC_PLLI2SCFGR_PLLI2SN_7 | RCC_PLLI2SCFGR_PLLI2SR_1; +#endif /* STM32F412Cx || STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx || STM32F446xx */ + + /* Reset PLLSAICFGR register */ +#if defined(STM32F427xx) || defined(STM32F429xx) || defined(STM32F437xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) + RCC->PLLSAICFGR = RCC_PLLSAICFGR_PLLSAIN_6 | RCC_PLLSAICFGR_PLLSAIN_7 | RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIR_1; +#elif defined(STM32F446xx) + RCC->PLLSAICFGR = RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIN_6 | RCC_PLLSAICFGR_PLLSAIN_7 | RCC_PLLSAICFGR_PLLSAIQ_2; +#endif /* STM32F427xx || STM32F429xx || STM32F437xx || STM32F439xx || STM32F469xx || STM32F479xx */ + + /* Disable all interrupts */ + CLEAR_BIT(RCC->CIR, RCC_CIR_LSIRDYIE | RCC_CIR_LSERDYIE | RCC_CIR_HSIRDYIE | RCC_CIR_HSERDYIE | RCC_CIR_PLLRDYIE); + +#if defined(RCC_CIR_PLLI2SRDYIE) + CLEAR_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYIE); +#endif /* RCC_CIR_PLLI2SRDYIE */ + +#if defined(RCC_CIR_PLLSAIRDYIE) + CLEAR_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYIE); +#endif /* RCC_CIR_PLLSAIRDYIE */ + + /* Clear all interrupt flags */ + SET_BIT(RCC->CIR, RCC_CIR_LSIRDYC | RCC_CIR_LSERDYC | RCC_CIR_HSIRDYC | RCC_CIR_HSERDYC | RCC_CIR_PLLRDYC | RCC_CIR_CSSC); + +#if defined(RCC_CIR_PLLI2SRDYC) + SET_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYC); +#endif /* RCC_CIR_PLLI2SRDYC */ + +#if defined(RCC_CIR_PLLSAIRDYC) + SET_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYC); +#endif /* RCC_CIR_PLLSAIRDYC */ + + /* Clear LSION bit */ + CLEAR_BIT(RCC->CSR, RCC_CSR_LSION); + + /* Reset all CSR flags */ + SET_BIT(RCC->CSR, RCC_CSR_RMVF); + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = HSI_VALUE; + + /* Adapt Systick interrupt period */ + if(HAL_InitTick(uwTickPrio) != HAL_OK) + { + return HAL_ERROR; + } + else + { + return HAL_OK; + } +} + +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\ + defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +/** + * @brief Initializes the RCC Oscillators according to the specified parameters in the + * RCC_OscInitTypeDef. + * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC Oscillators. + * @note The PLL is not disabled when used as system clock. + * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not + * supported by this API. User should request a transition to LSE Off + * first and then LSE On or LSE Bypass. + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this API. User should request a transition to HSE Off + * first and then HSE On or HSE Bypass. + * @note This function add the PLL/PLLR factor management during PLL configuration this feature + * is only available in STM32F410xx/STM32F446xx/STM32F469xx/STM32F479xx/STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + uint32_t tickstart, pll_config; + + /* Check Null pointer */ + if(RCC_OscInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); + /*------------------------------- HSE Configuration ------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) + { + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); + /* When the HSE is used as system clock or clock source for PLL in these cases HSE will not disabled */ +#if defined(STM32F446xx) + if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSE) ||\ + ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE)) ||\ + ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLLR) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE))) +#else + if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSE) ||\ + ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE))) +#endif /* STM32F446xx */ + { + if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) + { + return HAL_ERROR; + } + } + else + { + /* Set the new HSE configuration ---------------------------------------*/ + __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); + + /* Check the HSE State */ + if((RCC_OscInitStruct->HSEState) != RCC_HSE_OFF) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSE is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSE is bypassed or disabled */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*----------------------------- HSI Configuration --------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); + assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); + + /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */ +#if defined(STM32F446xx) + if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSI) ||\ + ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI)) ||\ + ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLLR) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI))) +#else + if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSI) ||\ + ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI))) +#endif /* STM32F446xx */ + { + /* When HSI is used as system clock it will not disabled */ + if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON)) + { + return HAL_ERROR; + } + /* Otherwise, just the calibration is allowed */ + else + { + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + } + } + else + { + /* Check the HSI State */ + if((RCC_OscInitStruct->HSIState)!= RCC_HSI_OFF) + { + /* Enable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + } + else + { + /* Disable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*------------------------------ LSI Configuration -------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) + { + /* Check the parameters */ + assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); + + /* Check the LSI State */ + if((RCC_OscInitStruct->LSIState)!= RCC_LSI_OFF) + { + /* Enable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSI is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + /*------------------------------ LSE Configuration -------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) + { + FlagStatus pwrclkchanged = RESET; + + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); + + /* Update LSE configuration in Backup Domain control register */ + /* Requires to enable write access to Backup Domain of necessary */ + if(__HAL_RCC_PWR_IS_CLK_DISABLED()) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + + if(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + { + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR, PWR_CR_DBP); + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + + while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP)) + { + if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Set the new LSE configuration -----------------------------------------*/ + __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); + /* Check the LSE State */ + if((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Restore clock configuration if changed */ + if(pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } + } + /*-------------------------------- PLL Configuration -----------------------*/ + /* Check the parameters */ + assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); + if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE) + { + /* Check if the PLL is used as system clock or not */ + if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL) + { + if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON) + { + /* Check the parameters */ + assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); + assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM)); + assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN)); + assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP)); + assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ)); + assert_param(IS_RCC_PLLR_VALUE(RCC_OscInitStruct->PLL.PLLR)); + + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure the main PLL clock source, multiplication and division factors. */ + WRITE_REG(RCC->PLLCFGR, (RCC_OscInitStruct->PLL.PLLSource | \ + RCC_OscInitStruct->PLL.PLLM | \ + (RCC_OscInitStruct->PLL.PLLN << RCC_PLLCFGR_PLLN_Pos) | \ + (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U) << RCC_PLLCFGR_PLLP_Pos) | \ + (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos) | \ + (RCC_OscInitStruct->PLL.PLLR << RCC_PLLCFGR_PLLR_Pos))); + /* Enable the main PLL. */ + __HAL_RCC_PLL_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) + { + if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) + { + if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + else + { + /* Check if there is a request to disable the PLL used as System clock source */ + if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) + { + return HAL_ERROR; + } + else + { + /* Do not return HAL_ERROR if request repeats the current configuration */ + pll_config = RCC->PLLCFGR; +#if defined (RCC_PLLCFGR_PLLR) + if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != (RCC_OscInitStruct->PLL.PLLM) << RCC_PLLCFGR_PLLM_Pos) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN) << RCC_PLLCFGR_PLLN_Pos) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U)) << RCC_PLLCFGR_PLLP_Pos) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos)) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLR) != (RCC_OscInitStruct->PLL.PLLR << RCC_PLLCFGR_PLLR_Pos))) +#else + if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != (RCC_OscInitStruct->PLL.PLLM) << RCC_PLLCFGR_PLLM_Pos) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN) << RCC_PLLCFGR_PLLN_Pos) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != (((RCC_OscInitStruct->PLL.PLLP >> 1U) - 1U)) << RCC_PLLCFGR_PLLP_Pos) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != (RCC_OscInitStruct->PLL.PLLQ << RCC_PLLCFGR_PLLQ_Pos))) +#endif + { + return HAL_ERROR; + } + } + } + } + return HAL_OK; +} + +/** + * @brief Configures the RCC_OscInitStruct according to the internal + * RCC configuration registers. + * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that will be configured. + * + * @note This function is only available in case of STM32F410xx/STM32F446xx/STM32F469xx/STM32F479xx/STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices. + * @note This function add the PLL/PLLR factor management + * @retval None + */ +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + /* Set all possible values for the Oscillator type parameter ---------------*/ + RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI; + + /* Get the HSE configuration -----------------------------------------------*/ + if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP) + { + RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS; + } + else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON) + { + RCC_OscInitStruct->HSEState = RCC_HSE_ON; + } + else + { + RCC_OscInitStruct->HSEState = RCC_HSE_OFF; + } + + /* Get the HSI configuration -----------------------------------------------*/ + if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION) + { + RCC_OscInitStruct->HSIState = RCC_HSI_ON; + } + else + { + RCC_OscInitStruct->HSIState = RCC_HSI_OFF; + } + + RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos); + + /* Get the LSE configuration -----------------------------------------------*/ + if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP) + { + RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS; + } + else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON) + { + RCC_OscInitStruct->LSEState = RCC_LSE_ON; + } + else + { + RCC_OscInitStruct->LSEState = RCC_LSE_OFF; + } + + /* Get the LSI configuration -----------------------------------------------*/ + if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION) + { + RCC_OscInitStruct->LSIState = RCC_LSI_ON; + } + else + { + RCC_OscInitStruct->LSIState = RCC_LSI_OFF; + } + + /* Get the PLL configuration -----------------------------------------------*/ + if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON) + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON; + } + else + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF; + } + RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC); + RCC_OscInitStruct->PLL.PLLM = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM); + RCC_OscInitStruct->PLL.PLLN = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos); + RCC_OscInitStruct->PLL.PLLP = (uint32_t)((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) + RCC_PLLCFGR_PLLP_0) << 1U) >> RCC_PLLCFGR_PLLP_Pos); + RCC_OscInitStruct->PLL.PLLQ = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos); + RCC_OscInitStruct->PLL.PLLR = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos); +} +#endif /* STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ + +#endif /* HAL_RCC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/stm32f4xx_hal_rcc_ex.h b/libs/hal/stm32f4xx_hal_rcc_ex.h similarity index 98% rename from Drivers/stm32f4xx_hal_rcc_ex.h rename to libs/hal/stm32f4xx_hal_rcc_ex.h index 1ac56e1..909a717 100644 --- a/Drivers/stm32f4xx_hal_rcc_ex.h +++ b/libs/hal/stm32f4xx_hal_rcc_ex.h @@ -1,7111 +1,7111 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_rcc_ex.h - * @author MCD Application Team - * @brief Header file of RCC HAL Extension module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_RCC_EX_H -#define __STM32F4xx_HAL_RCC_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup RCCEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup RCCEx_Exported_Types RCCEx Exported Types - * @{ - */ - -/** - * @brief RCC PLL configuration structure definition - */ -typedef struct -{ - uint32_t PLLState; /*!< The new state of the PLL. - This parameter can be a value of @ref RCC_PLL_Config */ - - uint32_t PLLSource; /*!< RCC_PLLSource: PLL entry clock source. - This parameter must be a value of @ref RCC_PLL_Clock_Source */ - - uint32_t PLLM; /*!< PLLM: Division factor for PLL VCO input clock. - This parameter must be a number between Min_Data = 0 and Max_Data = 63 */ - - uint32_t PLLN; /*!< PLLN: Multiplication factor for PLL VCO output clock. - This parameter must be a number between Min_Data = 50 and Max_Data = 432 - except for STM32F411xE devices where the Min_Data = 192 */ - - uint32_t PLLP; /*!< PLLP: Division factor for main system clock (SYSCLK). - This parameter must be a value of @ref RCC_PLLP_Clock_Divider */ - - uint32_t PLLQ; /*!< PLLQ: Division factor for OTG FS, SDIO and RNG clocks. - This parameter must be a number between Min_Data = 2 and Max_Data = 15 */ -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F469xx) ||\ - defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ - defined(STM32F413xx) || defined(STM32F423xx) - uint32_t PLLR; /*!< PLLR: PLL division factor for I2S, SAI, SYSTEM, SPDIFRX clocks. - This parameter is only available in STM32F410xx/STM32F446xx/STM32F469xx/STM32F479xx - and STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx/STM32F413xx/STM32F423xx devices. - This parameter must be a number between Min_Data = 2 and Max_Data = 7 */ -#endif /* STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ -}RCC_PLLInitTypeDef; - -#if defined(STM32F446xx) -/** - * @brief PLLI2S Clock structure definition - */ -typedef struct -{ - uint32_t PLLI2SM; /*!< Specifies division factor for PLL VCO input clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 63 */ - - uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. - This parameter must be a number between Min_Data = 50 and Max_Data = 432 */ - - uint32_t PLLI2SP; /*!< Specifies division factor for SPDIFRX Clock. - This parameter must be a value of @ref RCCEx_PLLI2SP_Clock_Divider */ - - uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 15. - This parameter will be used only when PLLI2S is selected as Clock Source SAI */ - - uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 7. - This parameter will be used only when PLLI2S is selected as Clock Source I2S */ -}RCC_PLLI2SInitTypeDef; - -/** - * @brief PLLSAI Clock structure definition - */ -typedef struct -{ - uint32_t PLLSAIM; /*!< Specifies division factor for PLL VCO input clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 63 */ - - uint32_t PLLSAIN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. - This parameter must be a number between Min_Data = 50 and Max_Data = 432 */ - - uint32_t PLLSAIP; /*!< Specifies division factor for OTG FS, SDIO and RNG clocks. - This parameter must be a value of @ref RCCEx_PLLSAIP_Clock_Divider */ - - uint32_t PLLSAIQ; /*!< Specifies the division factor for SAI clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 15. - This parameter will be used only when PLLSAI is selected as Clock Source SAI */ -}RCC_PLLSAIInitTypeDef; - -/** - * @brief RCC extended clocks structure definition - */ -typedef struct -{ - uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. - This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ - - RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - - RCC_PLLSAIInitTypeDef PLLSAI; /*!< PLL SAI structure parameters. - This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */ - - uint32_t PLLI2SDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 32 - This parameter will be used only when PLLI2S is selected as Clock Source SAI */ - - uint32_t PLLSAIDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 32 - This parameter will be used only when PLLSAI is selected as Clock Source SAI */ - - uint32_t Sai1ClockSelection; /*!< Specifies SAI1 Clock Source Selection. - This parameter can be a value of @ref RCCEx_SAI1_Clock_Source */ - - uint32_t Sai2ClockSelection; /*!< Specifies SAI2 Clock Source Selection. - This parameter can be a value of @ref RCCEx_SAI2_Clock_Source */ - - uint32_t I2sApb1ClockSelection; /*!< Specifies I2S APB1 Clock Source Selection. - This parameter can be a value of @ref RCCEx_I2SAPB1_Clock_Source */ - - uint32_t I2sApb2ClockSelection; /*!< Specifies I2S APB2 Clock Source Selection. - This parameter can be a value of @ref RCCEx_I2SAPB2_Clock_Source */ - - uint32_t RTCClockSelection; /*!< Specifies RTC Clock Source Selection. - This parameter can be a value of @ref RCC_RTC_Clock_Source */ - - uint32_t SdioClockSelection; /*!< Specifies SDIO Clock Source Selection. - This parameter can be a value of @ref RCCEx_SDIO_Clock_Source */ - - uint32_t CecClockSelection; /*!< Specifies CEC Clock Source Selection. - This parameter can be a value of @ref RCCEx_CEC_Clock_Source */ - - uint32_t Fmpi2c1ClockSelection; /*!< Specifies FMPI2C1 Clock Source Selection. - This parameter can be a value of @ref RCCEx_FMPI2C1_Clock_Source */ - - uint32_t SpdifClockSelection; /*!< Specifies SPDIFRX Clock Source Selection. - This parameter can be a value of @ref RCCEx_SPDIFRX_Clock_Source */ - - uint32_t Clk48ClockSelection; /*!< Specifies CLK48 Clock Selection this clock used OTG FS, SDIO and RNG clocks. - This parameter can be a value of @ref RCCEx_CLK48_Clock_Source */ - - uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection. - This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */ -}RCC_PeriphCLKInitTypeDef; -#endif /* STM32F446xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -/** - * @brief RCC extended clocks structure definition - */ -typedef struct -{ - uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. - This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ - - uint32_t I2SClockSelection; /*!< Specifies RTC Clock Source Selection. - This parameter can be a value of @ref RCCEx_I2S_APB_Clock_Source */ - - uint32_t RTCClockSelection; /*!< Specifies RTC Clock Source Selection. - This parameter can be a value of @ref RCC_RTC_Clock_Source */ - - uint32_t Lptim1ClockSelection; /*!< Specifies LPTIM1 Clock Source Selection. - This parameter can be a value of @ref RCCEx_LPTIM1_Clock_Source */ - - uint32_t Fmpi2c1ClockSelection; /*!< Specifies FMPI2C1 Clock Source Selection. - This parameter can be a value of @ref RCCEx_FMPI2C1_Clock_Source */ - - uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection. - This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */ -}RCC_PeriphCLKInitTypeDef; -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** - * @brief PLLI2S Clock structure definition - */ -typedef struct -{ - uint32_t PLLI2SM; /*!< Specifies division factor for PLL VCO input clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 63 */ - - uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. - This parameter must be a number between Min_Data = 50 and Max_Data = 432 */ - - uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 15. - This parameter will be used only when PLLI2S is selected as Clock Source SAI */ - - uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 7. - This parameter will be used only when PLLI2S is selected as Clock Source I2S */ -}RCC_PLLI2SInitTypeDef; - -/** - * @brief RCC extended clocks structure definition - */ -typedef struct -{ - uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. - This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ - - RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters. - This parameter will be used only when PLLI2S is selected as Clock Source I2S */ - -#if defined(STM32F413xx) || defined(STM32F423xx) - uint32_t PLLDivR; /*!< Specifies the PLL division factor for SAI1 clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 32 - This parameter will be used only when PLL is selected as Clock Source SAI */ - - uint32_t PLLI2SDivR; /*!< Specifies the PLLI2S division factor for SAI1 clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 32 - This parameter will be used only when PLLI2S is selected as Clock Source SAI */ -#endif /* STM32F413xx || STM32F423xx */ - - uint32_t I2sApb1ClockSelection; /*!< Specifies I2S APB1 Clock Source Selection. - This parameter can be a value of @ref RCCEx_I2SAPB1_Clock_Source */ - - uint32_t I2sApb2ClockSelection; /*!< Specifies I2S APB2 Clock Source Selection. - This parameter can be a value of @ref RCCEx_I2SAPB2_Clock_Source */ - - uint32_t RTCClockSelection; /*!< Specifies RTC Clock Source Selection. - This parameter can be a value of @ref RCC_RTC_Clock_Source */ - - uint32_t SdioClockSelection; /*!< Specifies SDIO Clock Source Selection. - This parameter can be a value of @ref RCCEx_SDIO_Clock_Source */ - - uint32_t Fmpi2c1ClockSelection; /*!< Specifies FMPI2C1 Clock Source Selection. - This parameter can be a value of @ref RCCEx_FMPI2C1_Clock_Source */ - - uint32_t Clk48ClockSelection; /*!< Specifies CLK48 Clock Selection this clock used OTG FS, SDIO and RNG clocks. - This parameter can be a value of @ref RCCEx_CLK48_Clock_Source */ - - uint32_t Dfsdm1ClockSelection; /*!< Specifies DFSDM1 Clock Selection. - This parameter can be a value of @ref RCCEx_DFSDM1_Kernel_Clock_Source */ - - uint32_t Dfsdm1AudioClockSelection;/*!< Specifies DFSDM1 Audio Clock Selection. - This parameter can be a value of @ref RCCEx_DFSDM1_Audio_Clock_Source */ - -#if defined(STM32F413xx) || defined(STM32F423xx) - uint32_t Dfsdm2ClockSelection; /*!< Specifies DFSDM2 Clock Selection. - This parameter can be a value of @ref RCCEx_DFSDM2_Kernel_Clock_Source */ - - uint32_t Dfsdm2AudioClockSelection;/*!< Specifies DFSDM2 Audio Clock Selection. - This parameter can be a value of @ref RCCEx_DFSDM2_Audio_Clock_Source */ - - uint32_t Lptim1ClockSelection; /*!< Specifies LPTIM1 Clock Source Selection. - This parameter can be a value of @ref RCCEx_LPTIM1_Clock_Source */ - - uint32_t SaiAClockSelection; /*!< Specifies SAI1_A Clock Prescalers Selection - This parameter can be a value of @ref RCCEx_SAI1_BlockA_Clock_Source */ - - uint32_t SaiBClockSelection; /*!< Specifies SAI1_B Clock Prescalers Selection - This parameter can be a value of @ref RCCEx_SAI1_BlockB_Clock_Source */ -#endif /* STM32F413xx || STM32F423xx */ - - uint32_t PLLI2SSelection; /*!< Specifies PLL I2S Clock Source Selection. - This parameter can be a value of @ref RCCEx_PLL_I2S_Clock_Source */ - - uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection. - This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */ -}RCC_PeriphCLKInitTypeDef; -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) - -/** - * @brief PLLI2S Clock structure definition - */ -typedef struct -{ - uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. - This parameter must be a number between Min_Data = 50 and Max_Data = 432. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - - uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 7. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - - uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI1 clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 15. - This parameter will be used only when PLLI2S is selected as Clock Source SAI */ -}RCC_PLLI2SInitTypeDef; - -/** - * @brief PLLSAI Clock structure definition - */ -typedef struct -{ - uint32_t PLLSAIN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. - This parameter must be a number between Min_Data = 50 and Max_Data = 432. - This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */ -#if defined(STM32F469xx) || defined(STM32F479xx) - uint32_t PLLSAIP; /*!< Specifies division factor for OTG FS and SDIO clocks. - This parameter is only available in STM32F469xx/STM32F479xx devices. - This parameter must be a value of @ref RCCEx_PLLSAIP_Clock_Divider */ -#endif /* STM32F469xx || STM32F479xx */ - - uint32_t PLLSAIQ; /*!< Specifies the division factor for SAI1 clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 15. - This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */ - - uint32_t PLLSAIR; /*!< specifies the division factor for LTDC clock - This parameter must be a number between Min_Data = 2 and Max_Data = 7. - This parameter will be used only when PLLSAI is selected as Clock Source LTDC */ - -}RCC_PLLSAIInitTypeDef; - -/** - * @brief RCC extended clocks structure definition - */ -typedef struct -{ - uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. - This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ - - RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - - RCC_PLLSAIInitTypeDef PLLSAI; /*!< PLL SAI structure parameters. - This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */ - - uint32_t PLLI2SDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 32 - This parameter will be used only when PLLI2S is selected as Clock Source SAI */ - - uint32_t PLLSAIDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 32 - This parameter will be used only when PLLSAI is selected as Clock Source SAI */ - - uint32_t PLLSAIDivR; /*!< Specifies the PLLSAI division factor for LTDC clock. - This parameter must be one value of @ref RCCEx_PLLSAI_DIVR */ - - uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection. - This parameter can be a value of @ref RCC_RTC_Clock_Source */ - - uint8_t TIMPresSelection; /*!< Specifies TIM Clock Prescalers Selection. - This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */ -#if defined(STM32F469xx) || defined(STM32F479xx) - uint32_t Clk48ClockSelection; /*!< Specifies CLK48 Clock Selection this clock used OTG FS, SDIO and RNG clocks. - This parameter can be a value of @ref RCCEx_CLK48_Clock_Source */ - - uint32_t SdioClockSelection; /*!< Specifies SDIO Clock Source Selection. - This parameter can be a value of @ref RCCEx_SDIO_Clock_Source */ -#endif /* STM32F469xx || STM32F479xx */ -}RCC_PeriphCLKInitTypeDef; - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) -/** - * @brief PLLI2S Clock structure definition - */ -typedef struct -{ -#if defined(STM32F411xE) - uint32_t PLLI2SM; /*!< PLLM: Division factor for PLLI2S VCO input clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 62 */ -#endif /* STM32F411xE */ - - uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. - This parameter must be a number between Min_Data = 50 and Max_Data = 432 - Except for STM32F411xE devices where the Min_Data = 192. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - - uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 7. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - -}RCC_PLLI2SInitTypeDef; - -/** - * @brief RCC extended clocks structure definition - */ -typedef struct -{ - uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. - This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ - - RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - - uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection. - This parameter can be a value of @ref RCC_RTC_Clock_Source */ -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) - uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection. - This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */ -#endif /* STM32F401xC || STM32F401xE || STM32F411xE */ -}RCC_PeriphCLKInitTypeDef; -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */ -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants - * @{ - */ - -/** @defgroup RCCEx_Periph_Clock_Selection RCC Periph Clock Selection - * @{ - */ -/* Peripheral Clock source for STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx */ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ - defined(STM32F413xx) || defined(STM32F423xx) -#define RCC_PERIPHCLK_I2S_APB1 0x00000001U -#define RCC_PERIPHCLK_I2S_APB2 0x00000002U -#define RCC_PERIPHCLK_TIM 0x00000004U -#define RCC_PERIPHCLK_RTC 0x00000008U -#define RCC_PERIPHCLK_FMPI2C1 0x00000010U -#define RCC_PERIPHCLK_CLK48 0x00000020U -#define RCC_PERIPHCLK_SDIO 0x00000040U -#define RCC_PERIPHCLK_PLLI2S 0x00000080U -#define RCC_PERIPHCLK_DFSDM1 0x00000100U -#define RCC_PERIPHCLK_DFSDM1_AUDIO 0x00000200U -#endif /* STM32F412Zx || STM32F412Vx) || STM32F412Rx || STM32F412Cx */ -#if defined(STM32F413xx) || defined(STM32F423xx) -#define RCC_PERIPHCLK_DFSDM2 0x00000400U -#define RCC_PERIPHCLK_DFSDM2_AUDIO 0x00000800U -#define RCC_PERIPHCLK_LPTIM1 0x00001000U -#define RCC_PERIPHCLK_SAIA 0x00002000U -#define RCC_PERIPHCLK_SAIB 0x00004000U -#endif /* STM32F413xx || STM32F423xx */ -/*----------------------------------------------------------------------------*/ - -/*------------------- Peripheral Clock source for STM32F410xx ----------------*/ -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define RCC_PERIPHCLK_I2S 0x00000001U -#define RCC_PERIPHCLK_TIM 0x00000002U -#define RCC_PERIPHCLK_RTC 0x00000004U -#define RCC_PERIPHCLK_FMPI2C1 0x00000008U -#define RCC_PERIPHCLK_LPTIM1 0x00000010U -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ -/*----------------------------------------------------------------------------*/ - -/*------------------- Peripheral Clock source for STM32F446xx ----------------*/ -#if defined(STM32F446xx) -#define RCC_PERIPHCLK_I2S_APB1 0x00000001U -#define RCC_PERIPHCLK_I2S_APB2 0x00000002U -#define RCC_PERIPHCLK_SAI1 0x00000004U -#define RCC_PERIPHCLK_SAI2 0x00000008U -#define RCC_PERIPHCLK_TIM 0x00000010U -#define RCC_PERIPHCLK_RTC 0x00000020U -#define RCC_PERIPHCLK_CEC 0x00000040U -#define RCC_PERIPHCLK_FMPI2C1 0x00000080U -#define RCC_PERIPHCLK_CLK48 0x00000100U -#define RCC_PERIPHCLK_SDIO 0x00000200U -#define RCC_PERIPHCLK_SPDIFRX 0x00000400U -#define RCC_PERIPHCLK_PLLI2S 0x00000800U -#endif /* STM32F446xx */ -/*-----------------------------------------------------------------------------*/ - -/*----------- Peripheral Clock source for STM32F469xx/STM32F479xx -------------*/ -#if defined(STM32F469xx) || defined(STM32F479xx) -#define RCC_PERIPHCLK_I2S 0x00000001U -#define RCC_PERIPHCLK_SAI_PLLI2S 0x00000002U -#define RCC_PERIPHCLK_SAI_PLLSAI 0x00000004U -#define RCC_PERIPHCLK_LTDC 0x00000008U -#define RCC_PERIPHCLK_TIM 0x00000010U -#define RCC_PERIPHCLK_RTC 0x00000020U -#define RCC_PERIPHCLK_PLLI2S 0x00000040U -#define RCC_PERIPHCLK_CLK48 0x00000080U -#define RCC_PERIPHCLK_SDIO 0x00000100U -#endif /* STM32F469xx || STM32F479xx */ -/*----------------------------------------------------------------------------*/ - -/*-------- Peripheral Clock source for STM32F42xxx/STM32F43xxx ---------------*/ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) -#define RCC_PERIPHCLK_I2S 0x00000001U -#define RCC_PERIPHCLK_SAI_PLLI2S 0x00000002U -#define RCC_PERIPHCLK_SAI_PLLSAI 0x00000004U -#define RCC_PERIPHCLK_LTDC 0x00000008U -#define RCC_PERIPHCLK_TIM 0x00000010U -#define RCC_PERIPHCLK_RTC 0x00000020U -#define RCC_PERIPHCLK_PLLI2S 0x00000040U -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ -/*----------------------------------------------------------------------------*/ - -/*-------- Peripheral Clock source for STM32F40xxx/STM32F41xxx ---------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) -#define RCC_PERIPHCLK_I2S 0x00000001U -#define RCC_PERIPHCLK_RTC 0x00000002U -#define RCC_PERIPHCLK_PLLI2S 0x00000004U -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */ -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) -#define RCC_PERIPHCLK_TIM 0x00000008U -#endif /* STM32F401xC || STM32F401xE || STM32F411xE */ -/*----------------------------------------------------------------------------*/ -/** - * @} - */ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F469xx) || \ - defined(STM32F479xx) -/** @defgroup RCCEx_I2S_Clock_Source I2S Clock Source - * @{ - */ -#define RCC_I2SCLKSOURCE_PLLI2S 0x00000000U -#define RCC_I2SCLKSOURCE_EXT 0x00000001U -/** - * @} - */ -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || - STM32F401xC || STM32F401xE || STM32F411xE || STM32F469xx || STM32F479xx */ - -/** @defgroup RCCEx_PLLSAI_DIVR RCC PLLSAI DIVR - * @{ - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) -#define RCC_PLLSAIDIVR_2 0x00000000U -#define RCC_PLLSAIDIVR_4 0x00010000U -#define RCC_PLLSAIDIVR_8 0x00020000U -#define RCC_PLLSAIDIVR_16 0x00030000U -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** @defgroup RCCEx_PLLI2SP_Clock_Divider RCC PLLI2SP Clock Divider - * @{ - */ -#if defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F412Cx) -#define RCC_PLLI2SP_DIV2 0x00000002U -#define RCC_PLLI2SP_DIV4 0x00000004U -#define RCC_PLLI2SP_DIV6 0x00000006U -#define RCC_PLLI2SP_DIV8 0x00000008U -#endif /* STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ -/** - * @} - */ - -/** @defgroup RCCEx_PLLSAIP_Clock_Divider RCC PLLSAIP Clock Divider - * @{ - */ -#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define RCC_PLLSAIP_DIV2 0x00000002U -#define RCC_PLLSAIP_DIV4 0x00000004U -#define RCC_PLLSAIP_DIV6 0x00000006U -#define RCC_PLLSAIP_DIV8 0x00000008U -#endif /* STM32F446xx || STM32F469xx || STM32F479xx */ -/** - * @} - */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** @defgroup RCCEx_SAI_BlockA_Clock_Source RCC SAI BlockA Clock Source - * @{ - */ -#define RCC_SAIACLKSOURCE_PLLSAI 0x00000000U -#define RCC_SAIACLKSOURCE_PLLI2S 0x00100000U -#define RCC_SAIACLKSOURCE_EXT 0x00200000U -/** - * @} - */ - -/** @defgroup RCCEx_SAI_BlockB_Clock_Source RCC SAI BlockB Clock Source - * @{ - */ -#define RCC_SAIBCLKSOURCE_PLLSAI 0x00000000U -#define RCC_SAIBCLKSOURCE_PLLI2S 0x00400000U -#define RCC_SAIBCLKSOURCE_EXT 0x00800000U -/** - * @} - */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) -/** @defgroup RCCEx_CLK48_Clock_Source RCC CLK48 Clock Source - * @{ - */ -#define RCC_CLK48CLKSOURCE_PLLQ 0x00000000U -#define RCC_CLK48CLKSOURCE_PLLSAIP ((uint32_t)RCC_DCKCFGR_CK48MSEL) -/** - * @} - */ - -/** @defgroup RCCEx_SDIO_Clock_Source RCC SDIO Clock Source - * @{ - */ -#define RCC_SDIOCLKSOURCE_CLK48 0x00000000U -#define RCC_SDIOCLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR_SDIOSEL) -/** - * @} - */ - -/** @defgroup RCCEx_DSI_Clock_Source RCC DSI Clock Source - * @{ - */ -#define RCC_DSICLKSOURCE_DSIPHY 0x00000000U -#define RCC_DSICLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_DSISEL) -/** - * @} - */ -#endif /* STM32F469xx || STM32F479xx */ - -#if defined(STM32F446xx) -/** @defgroup RCCEx_SAI1_Clock_Source RCC SAI1 Clock Source - * @{ - */ -#define RCC_SAI1CLKSOURCE_PLLSAI 0x00000000U -#define RCC_SAI1CLKSOURCE_PLLI2S ((uint32_t)RCC_DCKCFGR_SAI1SRC_0) -#define RCC_SAI1CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_SAI1SRC_1) -#define RCC_SAI1CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_SAI1SRC) -/** - * @} - */ - -/** @defgroup RCCEx_SAI2_Clock_Source RCC SAI2 Clock Source - * @{ - */ -#define RCC_SAI2CLKSOURCE_PLLSAI 0x00000000U -#define RCC_SAI2CLKSOURCE_PLLI2S ((uint32_t)RCC_DCKCFGR_SAI2SRC_0) -#define RCC_SAI2CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_SAI2SRC_1) -#define RCC_SAI2CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_SAI2SRC) -/** - * @} - */ - -/** @defgroup RCCEx_I2SAPB1_Clock_Source RCC I2S APB1 Clock Source - * @{ - */ -#define RCC_I2SAPB1CLKSOURCE_PLLI2S 0x00000000U -#define RCC_I2SAPB1CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S1SRC_0) -#define RCC_I2SAPB1CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S1SRC_1) -#define RCC_I2SAPB1CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S1SRC) -/** - * @} - */ - -/** @defgroup RCCEx_I2SAPB2_Clock_Source RCC I2S APB2 Clock Source - * @{ - */ -#define RCC_I2SAPB2CLKSOURCE_PLLI2S 0x00000000U -#define RCC_I2SAPB2CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S2SRC_0) -#define RCC_I2SAPB2CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S2SRC_1) -#define RCC_I2SAPB2CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S2SRC) -/** - * @} - */ - -/** @defgroup RCCEx_FMPI2C1_Clock_Source RCC FMPI2C1 Clock Source - * @{ - */ -#define RCC_FMPI2C1CLKSOURCE_PCLK1 0x00000000U -#define RCC_FMPI2C1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_0) -#define RCC_FMPI2C1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_1) -/** - * @} - */ - -/** @defgroup RCCEx_CEC_Clock_Source RCC CEC Clock Source - * @{ - */ -#define RCC_CECCLKSOURCE_HSI 0x00000000U -#define RCC_CECCLKSOURCE_LSE ((uint32_t)RCC_DCKCFGR2_CECSEL) -/** - * @} - */ - -/** @defgroup RCCEx_CLK48_Clock_Source RCC CLK48 Clock Source - * @{ - */ -#define RCC_CLK48CLKSOURCE_PLLQ 0x00000000U -#define RCC_CLK48CLKSOURCE_PLLSAIP ((uint32_t)RCC_DCKCFGR2_CK48MSEL) -/** - * @} - */ - -/** @defgroup RCCEx_SDIO_Clock_Source RCC SDIO Clock Source - * @{ - */ -#define RCC_SDIOCLKSOURCE_CLK48 0x00000000U -#define RCC_SDIOCLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_SDIOSEL) -/** - * @} - */ - -/** @defgroup RCCEx_SPDIFRX_Clock_Source RCC SPDIFRX Clock Source - * @{ - */ -#define RCC_SPDIFRXCLKSOURCE_PLLR 0x00000000U -#define RCC_SPDIFRXCLKSOURCE_PLLI2SP ((uint32_t)RCC_DCKCFGR2_SPDIFRXSEL) -/** - * @} - */ - -#endif /* STM32F446xx */ - -#if defined(STM32F413xx) || defined(STM32F423xx) -/** @defgroup RCCEx_SAI1_BlockA_Clock_Source RCC SAI BlockA Clock Source - * @{ - */ -#define RCC_SAIACLKSOURCE_PLLI2SR 0x00000000U -#define RCC_SAIACLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_SAI1ASRC_0) -#define RCC_SAIACLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_SAI1ASRC_1) -#define RCC_SAIACLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_SAI1ASRC_0 | RCC_DCKCFGR_SAI1ASRC_1) -/** - * @} - */ - -/** @defgroup RCCEx_SAI1_BlockB_Clock_Source RCC SAI BlockB Clock Source - * @{ - */ -#define RCC_SAIBCLKSOURCE_PLLI2SR 0x00000000U -#define RCC_SAIBCLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_SAI1BSRC_0) -#define RCC_SAIBCLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_SAI1BSRC_1) -#define RCC_SAIBCLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_SAI1BSRC_0 | RCC_DCKCFGR_SAI1BSRC_1) -/** - * @} - */ - -/** @defgroup RCCEx_LPTIM1_Clock_Source RCC LPTIM1 Clock Source - * @{ - */ -#define RCC_LPTIM1CLKSOURCE_PCLK1 0x00000000U -#define RCC_LPTIM1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_0) -#define RCC_LPTIM1CLKSOURCE_LSI ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_1) -#define RCC_LPTIM1CLKSOURCE_LSE ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_0 | RCC_DCKCFGR2_LPTIM1SEL_1) -/** - * @} - */ - - -/** @defgroup RCCEx_DFSDM2_Audio_Clock_Source RCC DFSDM2 Audio Clock Source - * @{ - */ -#define RCC_DFSDM2AUDIOCLKSOURCE_I2S1 0x00000000U -#define RCC_DFSDM2AUDIOCLKSOURCE_I2S2 ((uint32_t)RCC_DCKCFGR_CKDFSDM2ASEL) -/** - * @} - */ - -/** @defgroup RCCEx_DFSDM2_Kernel_Clock_Source RCC DFSDM2 Kernel Clock Source - * @{ - */ -#define RCC_DFSDM2CLKSOURCE_PCLK2 0x00000000U -#define RCC_DFSDM2CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR_CKDFSDM1SEL) -/** - * @} - */ - -#endif /* STM32F413xx || STM32F423xx */ - -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @defgroup RCCEx_PLL_I2S_Clock_Source PLL I2S Clock Source - * @{ - */ -#define RCC_PLLI2SCLKSOURCE_PLLSRC 0x00000000U -#define RCC_PLLI2SCLKSOURCE_EXT ((uint32_t)RCC_PLLI2SCFGR_PLLI2SSRC) -/** - * @} - */ - -/** @defgroup RCCEx_DFSDM1_Audio_Clock_Source RCC DFSDM1 Audio Clock Source - * @{ - */ -#define RCC_DFSDM1AUDIOCLKSOURCE_I2S1 0x00000000U -#define RCC_DFSDM1AUDIOCLKSOURCE_I2S2 ((uint32_t)RCC_DCKCFGR_CKDFSDM1ASEL) -/** - * @} - */ - -/** @defgroup RCCEx_DFSDM1_Kernel_Clock_Source RCC DFSDM1 Kernel Clock Source - * @{ - */ -#define RCC_DFSDM1CLKSOURCE_PCLK2 0x00000000U -#define RCC_DFSDM1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR_CKDFSDM1SEL) -/** - * @} - */ - -/** @defgroup RCCEx_I2SAPB1_Clock_Source RCC I2S APB1 Clock Source - * @{ - */ -#define RCC_I2SAPB1CLKSOURCE_PLLI2S 0x00000000U -#define RCC_I2SAPB1CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S1SRC_0) -#define RCC_I2SAPB1CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S1SRC_1) -#define RCC_I2SAPB1CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S1SRC) -/** - * @} - */ - -/** @defgroup RCCEx_I2SAPB2_Clock_Source RCC I2S APB2 Clock Source - * @{ - */ -#define RCC_I2SAPB2CLKSOURCE_PLLI2S 0x00000000U -#define RCC_I2SAPB2CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S2SRC_0) -#define RCC_I2SAPB2CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S2SRC_1) -#define RCC_I2SAPB2CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S2SRC) -/** - * @} - */ - -/** @defgroup RCCEx_FMPI2C1_Clock_Source RCC FMPI2C1 Clock Source - * @{ - */ -#define RCC_FMPI2C1CLKSOURCE_PCLK1 0x00000000U -#define RCC_FMPI2C1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_0) -#define RCC_FMPI2C1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_1) -/** - * @} - */ - -/** @defgroup RCCEx_CLK48_Clock_Source RCC CLK48 Clock Source - * @{ - */ -#define RCC_CLK48CLKSOURCE_PLLQ 0x00000000U -#define RCC_CLK48CLKSOURCE_PLLI2SQ ((uint32_t)RCC_DCKCFGR2_CK48MSEL) -/** - * @} - */ - -/** @defgroup RCCEx_SDIO_Clock_Source RCC SDIO Clock Source - * @{ - */ -#define RCC_SDIOCLKSOURCE_CLK48 0x00000000U -#define RCC_SDIOCLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_SDIOSEL) -/** - * @} - */ -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) - -/** @defgroup RCCEx_I2S_APB_Clock_Source RCC I2S APB Clock Source - * @{ - */ -#define RCC_I2SAPBCLKSOURCE_PLLR 0x00000000U -#define RCC_I2SAPBCLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2SSRC_0) -#define RCC_I2SAPBCLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2SSRC_1) -/** - * @} - */ - -/** @defgroup RCCEx_FMPI2C1_Clock_Source RCC FMPI2C1 Clock Source - * @{ - */ -#define RCC_FMPI2C1CLKSOURCE_PCLK1 0x00000000U -#define RCC_FMPI2C1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_0) -#define RCC_FMPI2C1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_1) -/** - * @} - */ - -/** @defgroup RCCEx_LPTIM1_Clock_Source RCC LPTIM1 Clock Source - * @{ - */ -#define RCC_LPTIM1CLKSOURCE_PCLK1 0x00000000U -#define RCC_LPTIM1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_0) -#define RCC_LPTIM1CLKSOURCE_LSI ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_1) -#define RCC_LPTIM1CLKSOURCE_LSE ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_0 | RCC_DCKCFGR2_LPTIM1SEL_1) -/** - * @} - */ -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ - defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ - defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @defgroup RCCEx_TIM_PRescaler_Selection RCC TIM PRescaler Selection - * @{ - */ -#define RCC_TIMPRES_DESACTIVATED ((uint8_t)0x00) -#define RCC_TIMPRES_ACTIVATED ((uint8_t)0x01) -/** - * @} - */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE ||\ - STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\ - STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) ||\ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\ - defined(STM32F423xx) -/** @defgroup RCCEx_LSE_Dual_Mode_Selection RCC LSE Dual Mode Selection - * @{ - */ -#define RCC_LSE_LOWPOWER_MODE ((uint8_t)0x00) -#define RCC_LSE_HIGHDRIVE_MODE ((uint8_t)0x01) -/** - * @} - */ -#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||\ - STM32F412Rx || STM32F412Cx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ - defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @defgroup RCC_MCO2_Clock_Source MCO2 Clock Source - * @{ - */ -#define RCC_MCO2SOURCE_SYSCLK 0x00000000U -#define RCC_MCO2SOURCE_PLLI2SCLK RCC_CFGR_MCO2_0 -#define RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2_1 -#define RCC_MCO2SOURCE_PLLCLK RCC_CFGR_MCO2 -/** - * @} - */ -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || - STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || - STM32F412Rx || STM32F413xx | STM32F423xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -/** @defgroup RCC_MCO2_Clock_Source MCO2 Clock Source - * @{ - */ -#define RCC_MCO2SOURCE_SYSCLK 0x00000000U -#define RCC_MCO2SOURCE_I2SCLK RCC_CFGR_MCO2_0 -#define RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2_1 -#define RCC_MCO2SOURCE_PLLCLK RCC_CFGR_MCO2 -/** - * @} - */ -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros - * @{ - */ -/*------------------- STM32F42xxx/STM32F43xxx/STM32F469xx/STM32F479xx --------*/ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CRC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOJ_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOK_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DMA2D_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ETHMACPTP_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) -#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) -#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN)) -#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN)) -#define __HAL_RCC_GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN)) -#define __HAL_RCC_GPIOJ_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOJEN)) -#define __HAL_RCC_GPIOK_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOKEN)) -#define __HAL_RCC_DMA2D_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2DEN)) -#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN)) -#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN)) -#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN)) -#define __HAL_RCC_ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN)) -#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN)) -#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN)) -#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) - -/** - * @brief Enable ETHERNET clock. - */ -#define __HAL_RCC_ETH_CLK_ENABLE() do { \ - __HAL_RCC_ETHMAC_CLK_ENABLE(); \ - __HAL_RCC_ETHMACTX_CLK_ENABLE(); \ - __HAL_RCC_ETHMACRX_CLK_ENABLE(); \ - } while(0U) -/** - * @brief Disable ETHERNET clock. - */ -#define __HAL_RCC_ETH_CLK_DISABLE() do { \ - __HAL_RCC_ETHMACTX_CLK_DISABLE(); \ - __HAL_RCC_ETHMACRX_CLK_DISABLE(); \ - __HAL_RCC_ETHMAC_CLK_DISABLE(); \ - } while(0U) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET) -#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET) -#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET) -#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET) -#define __HAL_RCC_GPIOI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) != RESET) -#define __HAL_RCC_GPIOJ_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOJEN)) != RESET) -#define __HAL_RCC_GPIOK_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOKEN)) != RESET) -#define __HAL_RCC_DMA2D_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2DEN)) != RESET) -#define __HAL_RCC_ETHMAC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) != RESET) -#define __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) != RESET) -#define __HAL_RCC_ETHMACRX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) != RESET) -#define __HAL_RCC_ETHMACPTP_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) != RESET) -#define __HAL_RCC_USB_OTG_HS_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) != RESET) -#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) != RESET) -#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET) -#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) -#define __HAL_RCC_ETH_IS_CLK_ENABLED() (__HAL_RCC_ETHMAC_IS_CLK_ENABLED() && \ - __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() && \ - __HAL_RCC_ETHMACRX_IS_CLK_ENABLED()) - -#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET) -#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET) -#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET) -#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET) -#define __HAL_RCC_GPIOI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) == RESET) -#define __HAL_RCC_GPIOJ_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOJEN)) == RESET) -#define __HAL_RCC_GPIOK_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOKEN)) == RESET) -#define __HAL_RCC_DMA2D_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2DEN)) == RESET) -#define __HAL_RCC_ETHMAC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) == RESET) -#define __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) == RESET) -#define __HAL_RCC_ETHMACRX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) == RESET) -#define __HAL_RCC_ETHMACPTP_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) == RESET) -#define __HAL_RCC_USB_OTG_HS_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) == RESET) -#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) == RESET) -#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET) -#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) -#define __HAL_RCC_ETH_IS_CLK_DISABLED() (__HAL_RCC_ETHMAC_IS_CLK_DISABLED() && \ - __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() && \ - __HAL_RCC_ETHMACRX_IS_CLK_DISABLED()) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ - #define __HAL_RCC_DCMI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN)) - -#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx) -#define __HAL_RCC_CRYP_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_HASH_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN)) -#define __HAL_RCC_HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN)) -#endif /* STM32F437xx || STM32F439xx || STM32F479xx */ - -#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\ - __HAL_RCC_SYSCFG_CLK_ENABLE();\ - }while(0U) - -#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN)) - -#define __HAL_RCC_RNG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) != RESET) -#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) == RESET) - -#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx) -#define __HAL_RCC_CRYP_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) != RESET) -#define __HAL_RCC_CRYP_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) == RESET) - -#define __HAL_RCC_HASH_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) != RESET) -#define __HAL_RCC_HASH_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) == RESET) -#endif /* STM32F437xx || STM32F439xx || STM32F479xx */ - -#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET) -#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET) - -#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET) -#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_FMC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN)) -#if defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_QSPI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN)) -#endif /* STM32F469xx || STM32F479xx */ -/** - * @} - */ - - -/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_FMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) != RESET) -#define __HAL_RCC_FMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) == RESET) -#if defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET) -#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET) -#endif /* STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable - * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USART3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CAN2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART7_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART8_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) -#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) -#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) -#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) -#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN)) -#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) -#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) -#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) -#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) -#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) -#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) -#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) -#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) -#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN)) -#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN)) -#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) -#define __HAL_RCC_UART7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART7EN)) -#define __HAL_RCC_UART8_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART8EN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) -#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) -#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) -#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) -#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET) -#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) -#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET) -#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET) -#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET) -#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET) -#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET) -#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET) -#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET) -#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET) -#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET) -#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) -#define __HAL_RCC_UART7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) != RESET) -#define __HAL_RCC_UART8_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) != RESET) - -#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) -#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) -#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) -#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) -#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET) -#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) -#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET) -#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET) -#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET) -#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET) -#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET) -#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET) -#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET) -#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET) -#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET) -#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) -#define __HAL_RCC_UART7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) == RESET) -#define __HAL_RCC_UART8_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ADC2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ADC3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SAI1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN)) -#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN)) -#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) -#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN)) -#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN)) -#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN)) -#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN)) -#define __HAL_RCC_SPI6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI6EN)) -#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN)) - -#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_LTDC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_LTDC_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_LTDCEN)) -#endif /* STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_DSI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_DSI_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DSIEN)) -#endif /* STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET) -#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET) -#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET) -#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET) -#define __HAL_RCC_SPI6_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI6EN)) != RESET) -#define __HAL_RCC_SAI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) != RESET) -#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET) -#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET) -#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN))!= RESET) - -#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET) -#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET) -#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN))== RESET) -#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET) -#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET) -#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET) -#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET) -#define __HAL_RCC_SPI6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI6EN)) == RESET) -#define __HAL_RCC_SAI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) == RESET) - -#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_LTDC_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_LTDCEN)) != RESET) -#define __HAL_RCC_LTDC_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_LTDCEN)) == RESET) -#endif /* STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_DSI_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DSIEN)) != RESET) -#define __HAL_RCC_DSI_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DSIEN)) == RESET) -#endif /* STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset - * @brief Force or release AHB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST)) -#define __HAL_RCC_GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST)) -#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST)) -#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST)) -#define __HAL_RCC_GPIOJ_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOJRST)) -#define __HAL_RCC_GPIOK_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOKRST)) -#define __HAL_RCC_DMA2D_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2DRST)) -#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) - -#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST)) -#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST)) -#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST)) -#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST)) -#define __HAL_RCC_GPIOJ_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOJRST)) -#define __HAL_RCC_GPIOK_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOKRST)) -#define __HAL_RCC_DMA2D_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2DRST)) -#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset - * @brief Force or release AHB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST)) -#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST)) -#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST)) - -#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U) -#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST)) -#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST)) -#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST)) - -#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx) -#define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST)) -#define __HAL_RCC_HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST)) - -#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST)) -#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST)) -#endif /* STM32F437xx || STM32F439xx || STM32F479xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset - * @brief Force or release AHB3 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U) -#define __HAL_RCC_FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST)) -#define __HAL_RCC_FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST)) - -#if defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST)) -#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST)) -#endif /* STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST)) -#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) -#define __HAL_RCC_UART7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART7RST)) -#define __HAL_RCC_UART8_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART8RST)) -#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST)) - -#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST)) -#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST)) -#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) -#define __HAL_RCC_UART7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART7RST)) -#define __HAL_RCC_UART8_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART8RST)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST)) -#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST)) -#define __HAL_RCC_SPI6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI6RST)) -#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST)) -#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) - -#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_RELEASE_RESET()(RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) -#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST)) -#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST)) -#define __HAL_RCC_SPI6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI6RST)) -#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST)) - -#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_LTDC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_LTDCRST)) -#define __HAL_RCC_LTDC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_LTDCRST)) -#endif /* STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_DSI_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DSIRST)) -#define __HAL_RCC_DSI_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DSIRST)) -#endif /* STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN)) -#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN)) -#define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN)) -#define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN)) -#define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN)) -#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN)) -#define __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOJLPEN)) -#define __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOKLPEN)) -#define __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM3LPEN)) -#define __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2DLPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) -#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN)) - -#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN)) -#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN)) -#define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN)) -#define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN)) -#define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN)) -#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN)) -#define __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOJLPEN)) -#define __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOKLPEN)) -#define __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2DLPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) -#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN)) -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN)) - -#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN)) -#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN)) - -#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN)) -#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN)) - -#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx) -#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN)) -#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN)) - -#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN)) -#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN)) -#endif /* STM32F437xx || STM32F439xx || STM32F479xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN)) -#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN)) - -#if defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN)) -#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN)) -#endif /* STM32F469xx || STM32F479xx */ -/** - * @} - */ - -/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN)) -#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN)) -#define __HAL_RCC_UART7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART7LPEN)) -#define __HAL_RCC_UART8_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART8LPEN)) -#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN)) - -#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN)) -#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN)) -#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN)) -#define __HAL_RCC_UART7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART7LPEN)) -#define __HAL_RCC_UART8_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART8LPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN)) -#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN)) -#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN)) -#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN)) -#define __HAL_RCC_SPI6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI6LPEN)) -#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN)) -#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE()(RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN)) - -#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE()(RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN)) -#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN)) -#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN)) -#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN)) -#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN)) -#define __HAL_RCC_SPI6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI6LPEN)) -#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN)) - -#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_LTDC_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_LTDCLPEN)) - -#define __HAL_RCC_LTDC_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_LTDCLPEN)) -#endif /* STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) -#define __HAL_RCC_DSI_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_DSILPEN)) -#define __HAL_RCC_DSI_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_DSILPEN)) -#endif /* STM32F469xx || STM32F479xx */ -/** - * @} - */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */ -/*----------------------------------------------------------------------------*/ - -/*----------------------------------- STM32F40xxx/STM32F41xxx-----------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) -/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CRC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) -#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) -#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN)) -#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN)) -#define __HAL_RCC_GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN)) -#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN)) -#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN)) -#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) -#if defined(STM32F407xx)|| defined(STM32F417xx) -/** - * @brief Enable ETHERNET clock. - */ -#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ETHMACPTP_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ETH_CLK_ENABLE() do { \ - __HAL_RCC_ETHMAC_CLK_ENABLE(); \ - __HAL_RCC_ETHMACTX_CLK_ENABLE(); \ - __HAL_RCC_ETHMACRX_CLK_ENABLE(); \ - } while(0U) - -/** - * @brief Disable ETHERNET clock. - */ -#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN)) -#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN)) -#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN)) -#define __HAL_RCC_ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN)) -#define __HAL_RCC_ETH_CLK_DISABLE() do { \ - __HAL_RCC_ETHMACTX_CLK_DISABLE(); \ - __HAL_RCC_ETHMACRX_CLK_DISABLE(); \ - __HAL_RCC_ETHMAC_CLK_DISABLE(); \ - } while(0U) -#endif /* STM32F407xx || STM32F417xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET) -#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) -#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET) -#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET) -#define __HAL_RCC_GPIOI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) != RESET) -#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET) -#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET) -#define __HAL_RCC_USB_OTG_HS_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) != RESET) -#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) != RESET) - -#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET) -#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET) -#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET) -#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET) -#define __HAL_RCC_GPIOI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) == RESET) -#define __HAL_RCC_USB_OTG_HS_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) == RESET) -#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN))== RESET) -#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET) -#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) -#if defined(STM32F407xx)|| defined(STM32F417xx) -/** - * @brief Enable ETHERNET clock. - */ -#define __HAL_RCC_ETHMAC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) != RESET) -#define __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) != RESET) -#define __HAL_RCC_ETHMACRX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) != RESET) -#define __HAL_RCC_ETHMACPTP_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) != RESET) -#define __HAL_RCC_ETH_IS_CLK_ENABLED() (__HAL_RCC_ETHMAC_IS_CLK_ENABLED() && \ - __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() && \ - __HAL_RCC_ETHMACRX_IS_CLK_ENABLED()) -/** - * @brief Disable ETHERNET clock. - */ -#define __HAL_RCC_ETHMAC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) == RESET) -#define __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) == RESET) -#define __HAL_RCC_ETHMACRX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) == RESET) -#define __HAL_RCC_ETHMACPTP_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) == RESET) -#define __HAL_RCC_ETH_IS_CLK_DISABLED() (__HAL_RCC_ETHMAC_IS_CLK_DISABLED() && \ - __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() && \ - __HAL_RCC_ETHMACRX_IS_CLK_DISABLED()) -#endif /* STM32F407xx || STM32F417xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\ - __HAL_RCC_SYSCFG_CLK_ENABLE();\ - }while(0U) - -#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN)) - -#define __HAL_RCC_RNG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN)) - -#if defined(STM32F407xx)|| defined(STM32F417xx) -#define __HAL_RCC_DCMI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN)) -#endif /* STM32F407xx || STM32F417xx */ - -#if defined(STM32F415xx) || defined(STM32F417xx) -#define __HAL_RCC_CRYP_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_HASH_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN)) -#define __HAL_RCC_HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN)) -#endif /* STM32F415xx || STM32F417xx */ -/** - * @} - */ - - -/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET) -#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET) - -#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET) -#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET) - -#if defined(STM32F407xx)|| defined(STM32F417xx) -#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) != RESET) -#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) == RESET) -#endif /* STM32F407xx || STM32F417xx */ - -#if defined(STM32F415xx) || defined(STM32F417xx) -#define __HAL_RCC_CRYP_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) != RESET) -#define __HAL_RCC_HASH_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) != RESET) - -#define __HAL_RCC_CRYP_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) == RESET) -#define __HAL_RCC_HASH_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) == RESET) -#endif /* STM32F415xx || STM32F417xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_FSMC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_FSMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FSMCEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_FSMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) != RESET) -#define __HAL_RCC_FSMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable - * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USART3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CAN2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) -#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) -#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) -#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) -#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN)) -#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) -#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) -#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) -#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) -#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) -#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) -#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) -#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) -#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN)) -#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN)) -#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) -#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) -#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) -#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) -#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET) -#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) -#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET) -#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET) -#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET) -#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET) -#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET) -#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET) -#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET) -#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET) -#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET) -#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) - -#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) -#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) -#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) -#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) -#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET) -#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) -#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET) -#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET) -#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET) -#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET) -#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET) -#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET) -#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET) -#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET) -#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET) -#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) - /** - * @} - */ - -/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ADC2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ADC3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN)) -#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN)) -#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) -#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN)) -#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN)) -#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET) -#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET) -#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET) -#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET) -#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET) -#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET) - -#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET) -#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET) -#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET) -#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET) -#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET) -#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset - * @brief Force or release AHB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST)) -#define __HAL_RCC_GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST)) -#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST)) -#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST)) -#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) - -#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST)) -#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST)) -#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST)) -#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST)) -#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset - * @brief Force or release AHB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U) - -#if defined(STM32F407xx)|| defined(STM32F417xx) -#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST)) -#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST)) -#endif /* STM32F407xx || STM32F417xx */ - -#if defined(STM32F415xx) || defined(STM32F417xx) -#define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST)) -#define __HAL_RCC_HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST)) - -#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST)) -#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST)) -#endif /* STM32F415xx || STM32F417xx */ - -#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST)) -#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST)) - -#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST)) -#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset - * @brief Force or release AHB3 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U) - -#define __HAL_RCC_FSMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FSMCRST)) -#define __HAL_RCC_FSMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FSMCRST)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST)) -#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) -#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST)) - -#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST)) -#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST)) -#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST)) -#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) - -#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_RELEASE_RESET()(RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) -#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN)) -#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN)) -#define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN)) -#define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN)) -#define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN)) -#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) -#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN)) - -#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN)) -#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN)) -#define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN)) -#define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN)) -#define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN)) -#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) -#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN)) -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN)) - -#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN)) -#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN)) - -#if defined(STM32F407xx)|| defined(STM32F417xx) -#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN)) -#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN)) -#endif /* STM32F407xx || STM32F417xx */ - -#if defined(STM32F415xx) || defined(STM32F417xx) -#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN)) -#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN)) - -#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN)) -#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN)) -#endif /* STM32F415xx || STM32F417xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_FSMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FSMCLPEN)) -#define __HAL_RCC_FSMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FSMCLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN)) -#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN)) -#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN)) - -#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN)) -#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN)) -#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN)) -#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN)) -#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN)) -#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE()(RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN)) - -#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE()(RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN)) -#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN)) -#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN)) -#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN)) -/** - * @} - */ -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ -/*----------------------------------------------------------------------------*/ - -/*------------------------- STM32F401xE/STM32F401xC --------------------------*/ -#if defined(STM32F401xC) || defined(STM32F401xE) -/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CRC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) -#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) -#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) -#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET) -#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET) -#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET) - -#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET) -#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET) -#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\ - __HAL_RCC_SYSCFG_CLK_ENABLE();\ - }while(0U) - -#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET) -#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable - * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) -#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) -#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) -#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) -#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) -#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) -#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) -#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) -#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET) - -#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) -#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) -#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) -#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) -#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN)) -#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN)) -#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET) -#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET) -#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET) - -#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET) -#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET) -#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET) -/** - * @} - */ -/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset - * @brief Force or release AHB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) - -#define __HAL_RCC_AHB1_RELEASE_RESET() (RCC->AHB1RSTR = 0x00U) -#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset - * @brief Force or release AHB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST)) - -#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U) -#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST)) - -#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00U) -#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) - -#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00U) -#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset - * @brief Force or release AHB3 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) - -#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN)) - -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN)) - -#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN)) - -#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN)) -/** - * @} - */ -#endif /* STM32F401xC || STM32F401xE*/ -/*----------------------------------------------------------------------------*/ - -/*-------------------------------- STM32F410xx -------------------------------*/ -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_CRC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_RNG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_RNGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_RNGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) -#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_RNGEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) -#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_RNGEN)) != RESET) - -#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) -#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_RNGEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB1) peripheral clock. - * @{ - */ -#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_LPTIM1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_RTCAPB_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_FMPI2C1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) -#define __HAL_RCC_RTCAPB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_RTCAPBEN)) -#define __HAL_RCC_LPTIM1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_LPTIM1EN)) -#define __HAL_RCC_FMPI2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_FMPI2C1EN)) -#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) -#define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) != RESET) -#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) != RESET) -#define __HAL_RCC_FMPI2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) != RESET) -#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) - -#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) -#define __HAL_RCC_RTCAPB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) == RESET) -#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) == RESET) -#define __HAL_RCC_FMPI2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) == RESET) -#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @{ - */ -#define __HAL_RCC_SPI5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_EXTIT_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN)) -#define __HAL_RCC_EXTIT_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_EXTITEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET) -#define __HAL_RCC_EXTIT_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) != RESET) - -#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET) -#define __HAL_RCC_EXTIT_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset - * @brief Force or release AHB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) -#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_RNGRST)) -#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) -#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_RNGRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset - * @brief Force or release AHB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB2_FORCE_RESET() -#define __HAL_RCC_AHB2_RELEASE_RESET() -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset - * @brief Force or release AHB3 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB3_FORCE_RESET() -#define __HAL_RCC_AHB3_RELEASE_RESET() -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_LPTIM1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_LPTIM1RST)) -#define __HAL_RCC_FMPI2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_FMPI2C1RST)) -#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) - -#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_LPTIM1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_LPTIM1RST)) -#define __HAL_RCC_FMPI2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_FMPI2C1RST)) -#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST)) -#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_RNGLPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) - -#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_RNGLPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @{ - */ -#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_LPTIM1LPEN)) -#define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_RTCAPBLPEN)) -#define __HAL_RCC_FMPI2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_FMPI2C1LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN)) - -#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_LPTIM1LPEN)) -#define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_RTCAPBLPEN)) -#define __HAL_RCC_FMPI2C1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_FMPI2C1LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @{ - */ -#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN)) -#define __HAL_RCC_EXTIT_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_EXTITLPEN)) -#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN)) -#define __HAL_RCC_EXTIT_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_EXTITLPEN)) -/** - * @} - */ - -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ -/*----------------------------------------------------------------------------*/ - -/*-------------------------------- STM32F411xx -------------------------------*/ -#if defined(STM32F411xE) -/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CRC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) -#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) -#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN)) -#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET) -#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET) -#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) - -#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET) -#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET) -#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEX_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\ - __HAL_RCC_SYSCFG_CLK_ENABLE();\ - }while(0U) - -#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET) -#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable - * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) -#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) -#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) -#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) -#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) -#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) -#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) -#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) -#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET) - -#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) -#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) -#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) -#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) -#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @{ - */ -#define __HAL_RCC_SPI5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN)) -#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN)) -#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) -#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET) -#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET) -#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET) -#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET) - -#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET) -#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET) -#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET) -#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset - * @brief Force or release AHB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) - -#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset - * @brief Force or release AHB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST)) - -#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U) -#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset - * @brief Force or release AHB3 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST)) - -#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST)) -#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) - -#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) -#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) - -#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN)) -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @{ - */ -#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN)) - -#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @{ - */ -#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN)) -#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN)) - -#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN)) -#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN)) -/** - * @} - */ -#endif /* STM32F411xE */ -/*----------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F446xx -----------------------------*/ -#if defined(STM32F446xx) -/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CRC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) -#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) -#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN)) -#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN)) -#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN)) -#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN)) -#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET) -#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET) -#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET) -#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET) -#define __HAL_RCC_USB_OTG_HS_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) != RESET) -#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) != RESET) -#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN))!= RESET) -#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) - -#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET) -#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET) -#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET) -#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET) -#define __HAL_RCC_USB_OTG_HS_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) == RESET) -#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) == RESET) -#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET) -#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET) -#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_DCMI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN)) -#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\ - __HAL_RCC_SYSCFG_CLK_ENABLE();\ - }while(0U) - -#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN)) - -#define __HAL_RCC_RNG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) != RESET) -#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) == RESET) - -#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET) -#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET) - -#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET) -#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_FMC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_QSPI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN)) -#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_FMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) != RESET) -#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET) - -#define __HAL_RCC_FMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) == RESET) -#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable - * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPDIFRX_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USART3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_FMPI2C1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CAN2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CEC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_DAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) -#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) -#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) -#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) -#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN)) -#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) -#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) -#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) -#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) -#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) -#define __HAL_RCC_SPDIFRX_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPDIFRXEN)) -#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) -#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) -#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) -#define __HAL_RCC_FMPI2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_FMPI2C1EN)) -#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN)) -#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN)) -#define __HAL_RCC_CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN)) -#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) -#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) -#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) -#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) -#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET) -#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) -#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET) -#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET) -#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET) -#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET) -#define __HAL_RCC_SPDIFRX_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPDIFRXEN)) != RESET) -#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET) -#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET) -#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET) -#define __HAL_RCC_FMPI2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) != RESET) -#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET) -#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET) -#define __HAL_RCC_CEC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) != RESET) -#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) - -#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) -#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) -#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) -#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) -#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET) -#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) -#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET) -#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET) -#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET) -#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET) -#define __HAL_RCC_SPDIFRX_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPDIFRXEN)) == RESET) -#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET) -#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET) -#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET) -#define __HAL_RCC_FMPI2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) == RESET) -#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET) -#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET) -#define __HAL_RCC_CEC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) == RESET) -#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ADC2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_ADC3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SAI1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SAI2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN)) -#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN)) -#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) -#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN)) -#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN)) -#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN)) -#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN)) -#define __HAL_RCC_SAI2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI2EN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET) -#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET) -#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET) -#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET) -#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET) -#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET) -#define __HAL_RCC_SAI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) != RESET) -#define __HAL_RCC_SAI2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI2EN)) != RESET) - -#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET) -#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET) -#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET) -#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET) -#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET) -#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET) -#define __HAL_RCC_SAI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) == RESET) -#define __HAL_RCC_SAI2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI2EN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset - * @brief Force or release AHB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST)) -#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST)) -#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) - -#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST)) -#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST)) -#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset - * @brief Force or release AHB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST)) -#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST)) -#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST)) - -#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U) -#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST)) -#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST)) -#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset - * @brief Force or release AHB3 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U) - -#define __HAL_RCC_FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST)) -#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST)) - -#define __HAL_RCC_FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST)) -#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_SPDIFRX_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPDIFRXRST)) -#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_FMPI2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_FMPI2C1RST)) -#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST)) -#define __HAL_RCC_CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST)) -#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) -#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST)) - -#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST)) -#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_SPDIFRX_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPDIFRXRST)) -#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_FMPI2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_FMPI2C1RST)) -#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST)) -#define __HAL_RCC_CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST)) -#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST)) -#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST)) -#define __HAL_RCC_SAI2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI2RST)) -#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) - -#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) -#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST)) -#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST)) -#define __HAL_RCC_SAI2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI2RST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) -#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN)) - -#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) -#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN)) -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN)) - -#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN)) -#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN)) - -#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN)) -#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN)) -#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN)) - -#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN)) -#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN)) -#define __HAL_RCC_SPDIFRX_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPDIFRXLPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN)) -#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN)) -#define __HAL_RCC_FMPI2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_FMPI2C1LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN)) -#define __HAL_RCC_CEC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CECLPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN)) -#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN)) - -#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN)) -#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN)) -#define __HAL_RCC_SPDIFRX_CLK_SLEEP_DISABLE()(RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPDIFRXLPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN)) -#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN)) -#define __HAL_RCC_FMPI2C1_CLK_SLEEP_DISABLE()(RCC->APB1LPENR &= ~(RCC_APB1LPENR_FMPI2C1LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN)) -#define __HAL_RCC_CEC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CECLPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN)) -#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN)) -#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN)) -#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN)) -#define __HAL_RCC_SAI2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI2LPEN)) -#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE()(RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN)) - -#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE()(RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN)) -#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN)) -#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN)) -#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN)) -#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN)) -#define __HAL_RCC_SAI2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI2LPEN)) -/** - * @} - */ - -#endif /* STM32F446xx */ -/*----------------------------------------------------------------------------*/ - -/*-------STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx-------*/ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F412Zx || STM32F413xx || STM32F423xx */ -#define __HAL_RCC_CRC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) -#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) -#endif /* STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN)) -#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN)) -#endif /* STM32F412Zx || STM32F413xx || STM32F423xx */ -#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET) -#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET) -#endif /* STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET) -#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET) -#endif /* STM32F412Zx || STM32F413xx || STM32F423xx */ -#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) - -#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET) -#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET) -#endif /* STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET) -#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET) -#endif /* STM32F412Zx || STM32F413xx || STM32F423xx */ -#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#if defined(STM32F423xx) -#define __HAL_RCC_AES_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_AES_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_AESEN)) -#endif /* STM32F423xx */ - -#define __HAL_RCC_RNG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN)) - -#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\ - __HAL_RCC_SYSCFG_CLK_ENABLE();\ - }while(0U) - -#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#if defined(STM32F423xx) -#define __HAL_RCC_AES_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_AESEN)) != RESET) -#define __HAL_RCC_AES_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_AESEN)) == RESET) -#endif /* STM32F423xx */ - -#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET) -#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET) - -#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET) -#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable - * @brief Enables or disables the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_FSMC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_QSPI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ - UNUSED(tmpreg); \ - } while(0U) - -#define __HAL_RCC_FSMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FSMCEN)) -#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN)) -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_FSMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) != RESET) -#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET) - -#define __HAL_RCC_FSMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) == RESET) -#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET) -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */ - -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable - * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - UNUSED(tmpreg); \ - } while(0U) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_LPTIM1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_RTCAPB_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_USART3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - UNUSED(tmpreg); \ - } while(0U) - -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_FMPI2C1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_CAN2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_CAN3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - UNUSED(tmpreg); \ - } while(0U) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_DAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART7_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART8_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) -#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) -#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) -#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) -#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) -#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) -#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) -#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_LPTIM1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_LPTIM1EN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_RTCAPB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_RTCAPBEN)) -#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) -#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) -#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN)) -#define __HAL_RCC_FMPI2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_FMPI2C1EN)) -#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN)) -#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_CAN3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN3EN)) -#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) -#define __HAL_RCC_UART7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART7EN)) -#define __HAL_RCC_UART8_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART8EN)) -#endif /* STM32F413xx || STM32F423xx */ - -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) -#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) -#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) -#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) -#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET) -#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET) -#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET) -#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) != RESET) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) != RESET) -#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) -#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET) -#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET) -#define __HAL_RCC_FMPI2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) != RESET) -#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN))!= RESET) -#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_CAN3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN3EN)) != RESET) -#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) -#define __HAL_RCC_UART7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) != RESET) -#define __HAL_RCC_UART8_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) != RESET) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) -#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) -#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) -#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) -#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET) -#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET) -#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET) -#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) == RESET) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_RTCAPB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) == RESET) -#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) -#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET) -#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET) -#define __HAL_RCC_FMPI2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) == RESET) -#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET) -#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_CAN3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN3EN)) == RESET) -#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) -#define __HAL_RCC_UART7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) == RESET) -#define __HAL_RCC_UART8_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) == RESET) -#endif /* STM32F413xx || STM32F423xx */ -/** - * @} - */ -/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - UNUSED(tmpreg); \ - } while(0U) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART9_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_UART9EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_UART9EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_UART10_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_UART10EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_UART10EN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_EXTIT_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - UNUSED(tmpreg); \ - } while(0U) -#define __HAL_RCC_SPI5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - UNUSED(tmpreg); \ - } while(0U) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SAI1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_DFSDM1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN);\ - UNUSED(tmpreg); \ - } while(0U) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_DFSDM2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg = 0x00U; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM2EN);\ - UNUSED(tmpreg); \ - } while(0U) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART9_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_UART9EN)) -#define __HAL_RCC_UART10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_UART10EN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN)) -#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN)) -#define __HAL_RCC_EXTIT_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_EXTITEN)) -#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) -#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_DFSDM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DFSDM1EN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_DFSDM2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DFSDM2EN)) -#endif /* STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART9_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_UART9EN)) != RESET) -#define __HAL_RCC_UART10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_UART10EN)) != RESET) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET) -#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET) -#define __HAL_RCC_EXTIT_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) != RESET) -#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET) -#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SAI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) != RESET) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_DFSDM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM1EN)) != RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_DFSDM2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM2EN)) != RESET) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART9_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_UART9EN)) == RESET) -#define __HAL_RCC_UART10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_UART10EN)) == RESET) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET) -#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET) -#define __HAL_RCC_EXTIT_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) == RESET) -#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET) -#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SAI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) == RESET) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_DFSDM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM1EN)) == RESET) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_DFSDM2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM2EN)) == RESET) -#endif /* STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset - * @brief Force or release AHB1 peripheral reset. - * @{ - */ -#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST)) -#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST)) -#endif /* STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST)) -#endif /* STM32F412Zx || STM32F413xx || STM32F423xx */ -#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) - -#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST)) -#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST)) -#endif /* STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST)) -#endif /* STM32F412Zx || STM32F413xx || STM32F423xx */ -#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset - * @brief Force or release AHB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U) - -#if defined(STM32F423xx) -#define __HAL_RCC_AES_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_AESRST)) -#define __HAL_RCC_AES_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_AESRST)) -#endif /* STM32F423xx */ - -#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST)) -#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST)) - -#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST)) -#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset - * @brief Force or release AHB3 peripheral reset. - * @{ - */ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U) - -#define __HAL_RCC_FSMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FSMCRST)) -#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST)) - -#define __HAL_RCC_FSMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FSMCRST)) -#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST)) -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */ -#if defined(STM32F412Cx) -#define __HAL_RCC_AHB3_FORCE_RESET() -#define __HAL_RCC_AHB3_RELEASE_RESET() - -#define __HAL_RCC_FSMC_FORCE_RESET() -#define __HAL_RCC_QSPI_FORCE_RESET() - -#define __HAL_RCC_FSMC_RELEASE_RESET() -#define __HAL_RCC_QSPI_RELEASE_RESET() -#endif /* STM32F412Cx */ -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_LPTIM1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_LPTIM1RST)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST)) -#define __HAL_RCC_FMPI2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_FMPI2C1RST)) -#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_CAN3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN3RST)) -#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) -#define __HAL_RCC_UART7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART7RST)) -#define __HAL_RCC_UART8_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART8RST)) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_LPTIM1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_LPTIM1RST)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST)) -#define __HAL_RCC_FMPI2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_FMPI2C1RST)) -#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_CAN3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN3RST)) -#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) -#define __HAL_RCC_UART7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART7RST)) -#define __HAL_RCC_UART8_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART8RST)) -#endif /* STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART9_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_UART9RST)) -#define __HAL_RCC_UART10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_UART10RST)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) -#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_DFSDM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DFSDM1RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_DFSDM2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DFSDM2RST)) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART9_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_UART9RST)) -#define __HAL_RCC_UART10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_UART10RST)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) -#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_DFSDM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DFSDM1RST)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_DFSDM2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DFSDM2RST)) -#endif /* STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN)) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#if defined(STM32F423xx) -#define __HAL_RCC_AES_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_AESLPEN)) -#define __HAL_RCC_AES_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_AESLPEN)) -#endif /* STM32F423xx */ - -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN)) -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN)) - -#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN)) -#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN)) -/** - * @} - */ - -/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_FSMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FSMCLPEN)) -#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN)) - -#define __HAL_RCC_FSMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FSMCLPEN)) -#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN)) -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */ - -/** - * @} - */ - -/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_LPTIM1LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_RTCAPBLPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN)) -#define __HAL_RCC_FMPI2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_FMPI2C1LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_CAN3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN3LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN)) -#define __HAL_RCC_UART7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART7LPEN)) -#define __HAL_RCC_UART8_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART8LPEN)) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_LPTIM1LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_RTCAPBLPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN)) -#define __HAL_RCC_FMPI2C1_CLK_SLEEP_DISABLE()(RCC->APB1LPENR &= ~(RCC_APB1LPENR_FMPI2C1LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_CAN3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN3LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN)) -#define __HAL_RCC_UART7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART7LPEN)) -#define __HAL_RCC_UART8_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART8LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -/** - * @} - */ - -/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART9_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_UART9LPEN)) -#define __HAL_RCC_UART10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_UART10LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_EXTIT_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_EXTITLPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN)) -#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_DFSDM1LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_DFSDM2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_DFSDM2LPEN)) -#endif /* STM32F413xx || STM32F423xx */ - -#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_UART9_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_UART9LPEN)) -#define __HAL_RCC_UART10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_UART10LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_EXTIT_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_EXTITLPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN)) -#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -#define __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_DFSDM1LPEN)) -#if defined(STM32F413xx) || defined(STM32F423xx) -#define __HAL_RCC_DFSDM2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_DFSDM2LPEN)) -#endif /* STM32F413xx || STM32F423xx */ -/** - * @} - */ -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ -/*----------------------------------------------------------------------------*/ - -/*------------------------------- PLL Configuration --------------------------*/ -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @brief Macro to configure the main PLL clock source, multiplication and division factors. - * @note This function must be used only when the main PLL is disabled. - * @param __RCC_PLLSource__ specifies the PLL entry clock source. - * This parameter can be one of the following values: - * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry - * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry - * @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S. - * @param __PLLM__ specifies the division factor for PLL VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note You have to set the PLLM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 2 MHz to limit PLL jitter. - * @param __PLLN__ specifies the multiplication factor for PLL VCO output clock - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLN parameter correctly to ensure that the VCO - * output frequency is between 100 and 432 MHz. - * - * @param __PLLP__ specifies the division factor for main system clock (SYSCLK) - * This parameter must be a number in the range {2, 4, 6, or 8}. - * - * @param __PLLQ__ specifies the division factor for OTG FS, SDIO and RNG clocks - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * @note If the USB OTG FS is used in your application, you have to set the - * PLLQ parameter correctly to have 48 MHz clock for the USB. However, - * the SDIO and RNG need a frequency lower than or equal to 48 MHz to work - * correctly. - * - * @param __PLLR__ PLL division factor for I2S, SAI, SYSTEM, SPDIFRX clocks. - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note This parameter is only available in STM32F446xx/STM32F469xx/STM32F479xx/ - STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx/STM32F413xx/STM32F423xx devices. - * - */ -#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__,__PLLR__) \ - (RCC->PLLCFGR = ((__RCC_PLLSource__) | (__PLLM__) | \ - ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \ - ((((__PLLP__) >> 1U) -1U) << RCC_PLLCFGR_PLLP_Pos) | \ - ((__PLLQ__) << RCC_PLLCFGR_PLLQ_Pos) | \ - ((__PLLR__) << RCC_PLLCFGR_PLLR_Pos))) -#else -/** @brief Macro to configure the main PLL clock source, multiplication and division factors. - * @note This function must be used only when the main PLL is disabled. - * @param __RCC_PLLSource__ specifies the PLL entry clock source. - * This parameter can be one of the following values: - * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry - * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry - * @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S. - * @param __PLLM__ specifies the division factor for PLL VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note You have to set the PLLM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 2 MHz to limit PLL jitter. - * @param __PLLN__ specifies the multiplication factor for PLL VCO output clock - * This parameter must be a number between Min_Data = 50 and Max_Data = 432 - * Except for STM32F411xE devices where Min_Data = 192. - * @note You have to set the PLLN parameter correctly to ensure that the VCO - * output frequency is between 100 and 432 MHz, Except for STM32F411xE devices - * where frequency is between 192 and 432 MHz. - * @param __PLLP__ specifies the division factor for main system clock (SYSCLK) - * This parameter must be a number in the range {2, 4, 6, or 8}. - * - * @param __PLLQ__ specifies the division factor for OTG FS, SDIO and RNG clocks - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * @note If the USB OTG FS is used in your application, you have to set the - * PLLQ parameter correctly to have 48 MHz clock for the USB. However, - * the SDIO and RNG need a frequency lower than or equal to 48 MHz to work - * correctly. - * - */ -#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__) \ - (RCC->PLLCFGR = (0x20000000U | (__RCC_PLLSource__) | (__PLLM__)| \ - ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \ - ((((__PLLP__) >> 1U) -1U) << RCC_PLLCFGR_PLLP_Pos) | \ - ((__PLLQ__) << RCC_PLLCFGR_PLLQ_Pos))) - #endif /* STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ -/*----------------------------------------------------------------------------*/ - -/*----------------------------PLLI2S Configuration ---------------------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ - defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - -/** @brief Macros to enable or disable the PLLI2S. - * @note The PLLI2S is disabled by hardware when entering STOP and STANDBY modes. - */ -#define __HAL_RCC_PLLI2S_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = ENABLE) -#define __HAL_RCC_PLLI2S_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = DISABLE) - -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || - STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || - STM32F412Rx || STM32F412Cx */ -#if defined(STM32F446xx) -/** @brief Macro to configure the PLLI2S clock multiplication and division factors . - * @note This macro must be used only when the PLLI2S is disabled. - * @note PLLI2S clock source is common with the main PLL (configured in - * HAL_RCC_ClockConfig() API). - * @param __PLLI2SM__ specifies the division factor for PLLI2S VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 1 MHz to limit PLLI2S jitter. - * - * @param __PLLI2SN__ specifies the multiplication factor for PLLI2S VCO output clock - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. - * - * @param __PLLI2SP__ specifies division factor for SPDIFRX Clock. - * This parameter must be a number in the range {2, 4, 6, or 8}. - * @note the PLLI2SP parameter is only available with STM32F446xx Devices - * - * @param __PLLI2SR__ specifies the division factor for I2S clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz - * on the I2S clock frequency. - * - * @param __PLLI2SQ__ specifies the division factor for SAI clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - */ -#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SP__, __PLLI2SQ__, __PLLI2SR__) \ - (RCC->PLLI2SCFGR = ((__PLLI2SM__) |\ - ((__PLLI2SN__) << RCC_PLLI2SCFGR_PLLI2SN_Pos) |\ - ((((__PLLI2SP__) >> 1U) -1U) << RCC_PLLI2SCFGR_PLLI2SP_Pos) |\ - ((__PLLI2SQ__) << RCC_PLLI2SCFGR_PLLI2SQ_Pos) |\ - ((__PLLI2SR__) << RCC_PLLI2SCFGR_PLLI2SR_Pos))) -#elif defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ - defined(STM32F413xx) || defined(STM32F423xx) -/** @brief Macro to configure the PLLI2S clock multiplication and division factors . - * @note This macro must be used only when the PLLI2S is disabled. - * @note PLLI2S clock source is common with the main PLL (configured in - * HAL_RCC_ClockConfig() API). - * @param __PLLI2SM__ specifies the division factor for PLLI2S VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 1 MHz to limit PLLI2S jitter. - * - * @param __PLLI2SN__ specifies the multiplication factor for PLLI2S VCO output clock - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. - * - * @param __PLLI2SR__ specifies the division factor for I2S clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz - * on the I2S clock frequency. - * - * @param __PLLI2SQ__ specifies the division factor for SAI clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - */ -#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SQ__, __PLLI2SR__) \ - (RCC->PLLI2SCFGR = ((__PLLI2SM__) |\ - ((__PLLI2SN__) << RCC_PLLI2SCFGR_PLLI2SN_Pos) |\ - ((__PLLI2SQ__) << RCC_PLLI2SCFGR_PLLI2SQ_Pos) |\ - ((__PLLI2SR__) << RCC_PLLI2SCFGR_PLLI2SR_Pos))) -#else -/** @brief Macro to configure the PLLI2S clock multiplication and division factors . - * @note This macro must be used only when the PLLI2S is disabled. - * @note PLLI2S clock source is common with the main PLL (configured in - * HAL_RCC_ClockConfig() API). - * @param __PLLI2SN__ specifies the multiplication factor for PLLI2S VCO output clock - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. - * - * @param __PLLI2SR__ specifies the division factor for I2S clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz - * on the I2S clock frequency. - * - */ -#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SN__, __PLLI2SR__) \ - (RCC->PLLI2SCFGR = (((__PLLI2SN__) << RCC_PLLI2SCFGR_PLLI2SN_Pos) |\ - ((__PLLI2SR__) << RCC_PLLI2SCFGR_PLLI2SR_Pos))) -#endif /* STM32F446xx */ - -#if defined(STM32F411xE) -/** @brief Macro to configure the PLLI2S clock multiplication and division factors . - * @note This macro must be used only when the PLLI2S is disabled. - * @note This macro must be used only when the PLLI2S is disabled. - * @note PLLI2S clock source is common with the main PLL (configured in - * HAL_RCC_ClockConfig() API). - * @param __PLLI2SM__ specifies the division factor for PLLI2S VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note The PLLI2SM parameter is only used with STM32F411xE/STM32F410xx Devices - * @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 2 MHz to limit PLLI2S jitter. - * @param __PLLI2SN__ specifies the multiplication factor for PLLI2S VCO output clock - * This parameter must be a number between Min_Data = 192 and Max_Data = 432. - * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 192 and Max_Data = 432 MHz. - * @param __PLLI2SR__ specifies the division factor for I2S clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz - * on the I2S clock frequency. - */ -#define __HAL_RCC_PLLI2S_I2SCLK_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SM__) |\ - ((__PLLI2SN__) << RCC_PLLI2SCFGR_PLLI2SN_Pos) |\ - ((__PLLI2SR__) << RCC_PLLI2SCFGR_PLLI2SR_Pos))) -#endif /* STM32F411xE */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** @brief Macro used by the SAI HAL driver to configure the PLLI2S clock multiplication and division factors. - * @note This macro must be used only when the PLLI2S is disabled. - * @note PLLI2S clock source is common with the main PLL (configured in - * HAL_RCC_ClockConfig() API) - * @param __PLLI2SN__ specifies the multiplication factor for PLLI2S VCO output clock. - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. - * @param __PLLI2SQ__ specifies the division factor for SAI1 clock. - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * @note the PLLI2SQ parameter is only available with STM32F427xx/437xx/429xx/439xx/469xx/479xx - * Devices and can be configured using the __HAL_RCC_PLLI2S_PLLSAICLK_CONFIG() macro - * @param __PLLI2SR__ specifies the division factor for I2S clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz - * on the I2S clock frequency. - */ -#define __HAL_RCC_PLLI2S_SAICLK_CONFIG(__PLLI2SN__, __PLLI2SQ__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SN__) << 6U) |\ - ((__PLLI2SQ__) << 24U) |\ - ((__PLLI2SR__) << 28U)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ -/*----------------------------------------------------------------------------*/ - -/*------------------------------ PLLSAI Configuration ------------------------*/ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** @brief Macros to Enable or Disable the PLLISAI. - * @note The PLLSAI is only available with STM32F429x/439x Devices. - * @note The PLLSAI is disabled by hardware when entering STOP and STANDBY modes. - */ -#define __HAL_RCC_PLLSAI_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLSAION_BB = ENABLE) -#define __HAL_RCC_PLLSAI_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLSAION_BB = DISABLE) - -#if defined(STM32F446xx) -/** @brief Macro to configure the PLLSAI clock multiplication and division factors. - * - * @param __PLLSAIM__ specifies the division factor for PLLSAI VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note You have to set the PLLSAIM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 1 MHz to limit PLLI2S jitter. - * @note The PLLSAIM parameter is only used with STM32F446xx Devices - * - * @param __PLLSAIN__ specifies the multiplication factor for PLLSAI VCO output clock. - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. - * - * @param __PLLSAIP__ specifies division factor for OTG FS, SDIO and RNG clocks. - * This parameter must be a number in the range {2, 4, 6, or 8}. - * @note the PLLSAIP parameter is only available with STM32F446xx Devices - * - * @param __PLLSAIQ__ specifies the division factor for SAI clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * - * @param __PLLSAIR__ specifies the division factor for LTDC clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note the PLLI2SR parameter is only available with STM32F427/437/429/439xx Devices - */ -#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIM__, __PLLSAIN__, __PLLSAIP__, __PLLSAIQ__, __PLLSAIR__) \ - (RCC->PLLSAICFGR = ((__PLLSAIM__) | \ - ((__PLLSAIN__) << RCC_PLLSAICFGR_PLLSAIN_Pos) | \ - ((((__PLLSAIP__) >> 1U) -1U) << RCC_PLLSAICFGR_PLLSAIP_Pos) | \ - ((__PLLSAIQ__) << RCC_PLLSAICFGR_PLLSAIQ_Pos))) -#endif /* STM32F446xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) -/** @brief Macro to configure the PLLSAI clock multiplication and division factors. - * - * @param __PLLSAIN__ specifies the multiplication factor for PLLSAI VCO output clock. - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. - * - * @param __PLLSAIP__ specifies division factor for SDIO and CLK48 clocks. - * This parameter must be a number in the range {2, 4, 6, or 8}. - * - * @param __PLLSAIQ__ specifies the division factor for SAI clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * - * @param __PLLSAIR__ specifies the division factor for LTDC clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - */ -#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIP__, __PLLSAIQ__, __PLLSAIR__) \ - (RCC->PLLSAICFGR = (((__PLLSAIN__) << RCC_PLLSAICFGR_PLLSAIN_Pos) |\ - ((((__PLLSAIP__) >> 1U) -1U) << RCC_PLLSAICFGR_PLLSAIP_Pos) |\ - ((__PLLSAIQ__) << RCC_PLLSAICFGR_PLLSAIQ_Pos) |\ - ((__PLLSAIR__) << RCC_PLLSAICFGR_PLLSAIR_Pos))) -#endif /* STM32F469xx || STM32F479xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) -/** @brief Macro to configure the PLLSAI clock multiplication and division factors. - * - * @param __PLLSAIN__ specifies the multiplication factor for PLLSAI VCO output clock. - * This parameter must be a number between Min_Data = 50 and Max_Data = 432. - * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. - * - * @param __PLLSAIQ__ specifies the division factor for SAI clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * - * @param __PLLSAIR__ specifies the division factor for LTDC clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note the PLLI2SR parameter is only available with STM32F427/437/429/439xx Devices - */ -#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIQ__, __PLLSAIR__) \ - (RCC->PLLSAICFGR = (((__PLLSAIN__) << RCC_PLLSAICFGR_PLLSAIN_Pos) | \ - ((__PLLSAIQ__) << RCC_PLLSAICFGR_PLLSAIQ_Pos) | \ - ((__PLLSAIR__) << RCC_PLLSAICFGR_PLLSAIR_Pos))) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ -/*----------------------------------------------------------------------------*/ - -/*------------------- PLLSAI/PLLI2S Dividers Configuration -------------------*/ -#if defined(STM32F413xx) || defined(STM32F423xx) -/** @brief Macro to configure the SAI clock Divider coming from PLLI2S. - * @note This function must be called before enabling the PLLI2S. - * @param __PLLI2SDivR__ specifies the PLLI2S division factor for SAI1 clock. - * This parameter must be a number between 1 and 32. - * SAI1 clock frequency = f(PLLI2SR) / __PLLI2SDivR__ - */ -#define __HAL_RCC_PLLI2S_PLLSAICLKDIVR_CONFIG(__PLLI2SDivR__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVR, (__PLLI2SDivR__)-1U)) - -/** @brief Macro to configure the SAI clock Divider coming from PLL. - * @param __PLLDivR__ specifies the PLL division factor for SAI1 clock. - * This parameter must be a number between 1 and 32. - * SAI1 clock frequency = f(PLLR) / __PLLDivR__ - */ -#define __HAL_RCC_PLL_PLLSAICLKDIVR_CONFIG(__PLLDivR__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLDIVR, ((__PLLDivR__)-1U)<<8U)) -#endif /* STM32F413xx || STM32F423xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) ||\ - defined(STM32F469xx) || defined(STM32F479xx) -/** @brief Macro to configure the SAI clock Divider coming from PLLI2S. - * @note This function must be called before enabling the PLLI2S. - * @param __PLLI2SDivQ__ specifies the PLLI2S division factor for SAI1 clock. - * This parameter must be a number between 1 and 32. - * SAI1 clock frequency = f(PLLI2SQ) / __PLLI2SDivQ__ - */ -#define __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(__PLLI2SDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVQ, (__PLLI2SDivQ__)-1U)) - -/** @brief Macro to configure the SAI clock Divider coming from PLLSAI. - * @note This function must be called before enabling the PLLSAI. - * @param __PLLSAIDivQ__ specifies the PLLSAI division factor for SAI1 clock . - * This parameter must be a number between Min_Data = 1 and Max_Data = 32. - * SAI1 clock frequency = f(PLLSAIQ) / __PLLSAIDivQ__ - */ -#define __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(__PLLSAIDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVQ, ((__PLLSAIDivQ__)-1U)<<8U)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** @brief Macro to configure the LTDC clock Divider coming from PLLSAI. - * - * @note The LTDC peripheral is only available with STM32F427/437/429/439/469/479xx Devices. - * @note This function must be called before enabling the PLLSAI. - * @param __PLLSAIDivR__ specifies the PLLSAI division factor for LTDC clock . - * This parameter must be a number between Min_Data = 2 and Max_Data = 16. - * LTDC clock frequency = f(PLLSAIR) / __PLLSAIDivR__ - */ -#define __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(__PLLSAIDivR__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVR, (__PLLSAIDivR__))) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ -/*----------------------------------------------------------------------------*/ - -/*------------------------- Peripheral Clock selection -----------------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F469xx) ||\ - defined(STM32F479xx) -/** @brief Macro to configure the I2S clock source (I2SCLK). - * @note This function must be called before enabling the I2S APB clock. - * @param __SOURCE__ specifies the I2S clock source. - * This parameter can be one of the following values: - * @arg RCC_I2SCLKSOURCE_PLLI2S: PLLI2S clock used as I2S clock source. - * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin - * used as I2S clock source. - */ -#define __HAL_RCC_I2S_CONFIG(__SOURCE__) (*(__IO uint32_t *) RCC_CFGR_I2SSRC_BB = (__SOURCE__)) - - -/** @brief Macro to get the I2S clock source (I2SCLK). - * @retval The clock source can be one of the following values: - * @arg @ref RCC_I2SCLKSOURCE_PLLI2S: PLLI2S clock used as I2S clock source. - * @arg @ref RCC_I2SCLKSOURCE_EXT External clock mapped on the I2S_CKIN pin - * used as I2S clock source - */ -#define __HAL_RCC_GET_I2S_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_I2SSRC))) -#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) - -/** @brief Macro to configure SAI1BlockA clock source selection. - * @note The SAI peripheral is only available with STM32F427/437/429/439/469/479xx Devices. - * @note This function must be called before enabling PLLSAI, PLLI2S and - * the SAI clock. - * @param __SOURCE__ specifies the SAI Block A clock source. - * This parameter can be one of the following values: - * @arg RCC_SAIACLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used - * as SAI1 Block A clock. - * @arg RCC_SAIACLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used - * as SAI1 Block A clock. - * @arg RCC_SAIACLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin - * used as SAI1 Block A clock. - */ -#define __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1ASRC, (__SOURCE__))) - -/** @brief Macro to configure SAI1BlockB clock source selection. - * @note The SAI peripheral is only available with STM32F427/437/429/439/469/479xx Devices. - * @note This function must be called before enabling PLLSAI, PLLI2S and - * the SAI clock. - * @param __SOURCE__ specifies the SAI Block B clock source. - * This parameter can be one of the following values: - * @arg RCC_SAIBCLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used - * as SAI1 Block B clock. - * @arg RCC_SAIBCLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used - * as SAI1 Block B clock. - * @arg RCC_SAIBCLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin - * used as SAI1 Block B clock. - */ -#define __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1BSRC, (__SOURCE__))) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F446xx) -/** @brief Macro to configure SAI1 clock source selection. - * @note This configuration is only available with STM32F446xx Devices. - * @note This function must be called before enabling PLL, PLLSAI, PLLI2S and - * the SAI clock. - * @param __SOURCE__ specifies the SAI1 clock source. - * This parameter can be one of the following values: - * @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock. - */ -#define __HAL_RCC_SAI1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1SRC, (__SOURCE__))) - -/** @brief Macro to Get SAI1 clock source selection. - * @note This configuration is only available with STM32F446xx Devices. - * @retval The clock source can be one of the following values: - * @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock. - */ -#define __HAL_RCC_GET_SAI1_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI1SRC)) - -/** @brief Macro to configure SAI2 clock source selection. - * @note This configuration is only available with STM32F446xx Devices. - * @note This function must be called before enabling PLL, PLLSAI, PLLI2S and - * the SAI clock. - * @param __SOURCE__ specifies the SAI2 clock source. - * This parameter can be one of the following values: - * @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock used as SAI2 clock. - */ -#define __HAL_RCC_SAI2_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI2SRC, (__SOURCE__))) - -/** @brief Macro to Get SAI2 clock source selection. - * @note This configuration is only available with STM32F446xx Devices. - * @retval The clock source can be one of the following values: - * @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock used as SAI2 clock. - */ -#define __HAL_RCC_GET_SAI2_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI2SRC)) - -/** @brief Macro to configure I2S APB1 clock source selection. - * @note This function must be called before enabling PLL, PLLI2S and the I2S clock. - * @param __SOURCE__ specifies the I2S APB1 clock source. - * This parameter can be one of the following values: - * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock. - * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as I2S APB1 clock. - * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as I2S APB1 clock. - * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_I2S_APB1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC, (__SOURCE__))) - -/** @brief Macro to Get I2S APB1 clock source selection. - * @retval The clock source can be one of the following values: - * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock. - * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as I2S APB1 clock. - * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as I2S APB1 clock. - * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_GET_I2S_APB1_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC)) - -/** @brief Macro to configure I2S APB2 clock source selection. - * @note This function must be called before enabling PLL, PLLI2S and the I2S clock. - * @param __SOURCE__ specifies the SAI Block A clock source. - * This parameter can be one of the following values: - * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock. - * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as I2S APB2 clock. - * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as I2S APB2 clock. - * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_I2S_APB2_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC, (__SOURCE__))) - -/** @brief Macro to Get I2S APB2 clock source selection. - * @retval The clock source can be one of the following values: - * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock. - * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as I2S APB2 clock. - * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as I2S APB2 clock. - * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_GET_I2S_APB2_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC)) - -/** @brief Macro to configure the CEC clock. - * @param __SOURCE__ specifies the CEC clock source. - * This parameter can be one of the following values: - * @arg RCC_CECCLKSOURCE_HSI: HSI selected as CEC clock - * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock - */ -#define __HAL_RCC_CEC_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the CEC clock. - * @retval The clock source can be one of the following values: - * @arg RCC_CECCLKSOURCE_HSI488: HSI selected as CEC clock - * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock - */ -#define __HAL_RCC_GET_CEC_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL)) - -/** @brief Macro to configure the FMPI2C1 clock. - * @param __SOURCE__ specifies the FMPI2C1 clock source. - * This parameter can be one of the following values: - * @arg RCC_FMPI2C1CLKSOURCE_PCLK1: PCLK1 selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock - */ -#define __HAL_RCC_FMPI2C1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the FMPI2C1 clock. - * @retval The clock source can be one of the following values: - * @arg RCC_FMPI2C1CLKSOURCE_PCLK1: PCLK1 selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock - */ -#define __HAL_RCC_GET_FMPI2C1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL)) - -/** @brief Macro to configure the CLK48 clock. - * @param __SOURCE__ specifies the CLK48 clock source. - * This parameter can be one of the following values: - * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock. - * @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock. - */ -#define __HAL_RCC_CLK48_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the CLK48 clock. - * @retval The clock source can be one of the following values: - * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock. - * @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock. - */ -#define __HAL_RCC_GET_CLK48_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL)) - -/** @brief Macro to configure the SDIO clock. - * @param __SOURCE__ specifies the SDIO clock source. - * This parameter can be one of the following values: - * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock. - * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock. - */ -#define __HAL_RCC_SDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the SDIO clock. - * @retval The clock source can be one of the following values: - * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock. - * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock. - */ -#define __HAL_RCC_GET_SDIO_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL)) - -/** @brief Macro to configure the SPDIFRX clock. - * @param __SOURCE__ specifies the SPDIFRX clock source. - * This parameter can be one of the following values: - * @arg RCC_SPDIFRXCLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SPDIFRX clock. - * @arg RCC_SPDIFRXCLKSOURCE_PLLI2SP: PLLI2S VCO Output divided by PLLI2SP used as SPDIFRX clock. - */ -#define __HAL_RCC_SPDIFRX_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SPDIFRXSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the SPDIFRX clock. - * @retval The clock source can be one of the following values: - * @arg RCC_SPDIFRXCLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SPDIFRX clock. - * @arg RCC_SPDIFRXCLKSOURCE_PLLI2SP: PLLI2S VCO Output divided by PLLI2SP used as SPDIFRX clock. - */ -#define __HAL_RCC_GET_SPDIFRX_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SPDIFRXSEL)) -#endif /* STM32F446xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) - -/** @brief Macro to configure the CLK48 clock. - * @param __SOURCE__ specifies the CLK48 clock source. - * This parameter can be one of the following values: - * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock. - * @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock. - */ -#define __HAL_RCC_CLK48_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CK48MSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the CLK48 clock. - * @retval The clock source can be one of the following values: - * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock. - * @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock. - */ -#define __HAL_RCC_GET_CLK48_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CK48MSEL)) - -/** @brief Macro to configure the SDIO clock. - * @param __SOURCE__ specifies the SDIO clock source. - * This parameter can be one of the following values: - * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock. - * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock. - */ -#define __HAL_RCC_SDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SDIOSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the SDIO clock. - * @retval The clock source can be one of the following values: - * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock. - * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock. - */ -#define __HAL_RCC_GET_SDIO_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SDIOSEL)) - -/** @brief Macro to configure the DSI clock. - * @param __SOURCE__ specifies the DSI clock source. - * This parameter can be one of the following values: - * @arg RCC_DSICLKSOURCE_PLLR: PLLR output used as DSI clock. - * @arg RCC_DSICLKSOURCE_DSIPHY: DSI-PHY output used as DSI clock. - */ -#define __HAL_RCC_DSI_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_DSISEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the DSI clock. - * @retval The clock source can be one of the following values: - * @arg RCC_DSICLKSOURCE_PLLR: PLLR output used as DSI clock. - * @arg RCC_DSICLKSOURCE_DSIPHY: DSI-PHY output used as DSI clock. - */ -#define __HAL_RCC_GET_DSI_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_DSISEL)) - -#endif /* STM32F469xx || STM32F479xx */ - -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ - defined(STM32F413xx) || defined(STM32F423xx) - /** @brief Macro to configure the DFSDM1 clock. - * @param __DFSDM1_CLKSOURCE__ specifies the DFSDM1 clock source. - * This parameter can be one of the following values: - * @arg RCC_DFSDM1CLKSOURCE_PCLK2: PCLK2 clock used as kernel clock. - * @arg RCC_DFSDM1CLKSOURCE_SYSCLK: System clock used as kernel clock. - * @retval None - */ -#define __HAL_RCC_DFSDM1_CONFIG(__DFSDM1_CLKSOURCE__) MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL, (__DFSDM1_CLKSOURCE__)) - -/** @brief Macro to get the DFSDM1 clock source. - * @retval The clock source can be one of the following values: - * @arg RCC_DFSDM1CLKSOURCE_PCLK2: PCLK2 clock used as kernel clock. - * @arg RCC_DFSDM1CLKSOURCE_SYSCLK: System clock used as kernel clock. - */ -#define __HAL_RCC_GET_DFSDM1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL))) - -/** @brief Macro to configure DFSDM1 Audio clock source selection. - * @note This configuration is only available with STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx/ - STM32F413xx/STM32F423xx Devices. - * @param __SOURCE__ specifies the DFSDM1 Audio clock source. - * This parameter can be one of the following values: - * @arg RCC_DFSDM1AUDIOCLKSOURCE_I2S1: CK_I2S_PCLK1 selected as audio clock - * @arg RCC_DFSDM1AUDIOCLKSOURCE_I2S2: CK_I2S_PCLK2 selected as audio clock - */ -#define __HAL_RCC_DFSDM1AUDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1ASEL, (__SOURCE__))) - -/** @brief Macro to Get DFSDM1 Audio clock source selection. - * @note This configuration is only available with STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx/ - STM32F413xx/STM32F423xx Devices. - * @retval The clock source can be one of the following values: - * @arg RCC_DFSDM1AUDIOCLKSOURCE_I2S1: CK_I2S_PCLK1 selected as audio clock - * @arg RCC_DFSDM1AUDIOCLKSOURCE_I2S2: CK_I2S_PCLK2 selected as audio clock - */ -#define __HAL_RCC_GET_DFSDM1AUDIO_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1ASEL)) - -#if defined(STM32F413xx) || defined(STM32F423xx) - /** @brief Macro to configure the DFSDM2 clock. - * @param __DFSDM2_CLKSOURCE__ specifies the DFSDM1 clock source. - * This parameter can be one of the following values: - * @arg RCC_DFSDM2CLKSOURCE_PCLK2: PCLK2 clock used as kernel clock. - * @arg RCC_DFSDM2CLKSOURCE_SYSCLK: System clock used as kernel clock. - * @retval None - */ -#define __HAL_RCC_DFSDM2_CONFIG(__DFSDM2_CLKSOURCE__) MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL, (__DFSDM2_CLKSOURCE__)) - -/** @brief Macro to get the DFSDM2 clock source. - * @retval The clock source can be one of the following values: - * @arg RCC_DFSDM2CLKSOURCE_PCLK2: PCLK2 clock used as kernel clock. - * @arg RCC_DFSDM2CLKSOURCE_SYSCLK: System clock used as kernel clock. - */ -#define __HAL_RCC_GET_DFSDM2_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL))) - -/** @brief Macro to configure DFSDM1 Audio clock source selection. - * @note This configuration is only available with STM32F413xx/STM32F423xx Devices. - * @param __SOURCE__ specifies the DFSDM2 Audio clock source. - * This parameter can be one of the following values: - * @arg RCC_DFSDM2AUDIOCLKSOURCE_I2S1: CK_I2S_PCLK1 selected as audio clock - * @arg RCC_DFSDM2AUDIOCLKSOURCE_I2S2: CK_I2S_PCLK2 selected as audio clock - */ -#define __HAL_RCC_DFSDM2AUDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM2ASEL, (__SOURCE__))) - -/** @brief Macro to Get DFSDM2 Audio clock source selection. - * @note This configuration is only available with STM32F413xx/STM32F423xx Devices. - * @retval The clock source can be one of the following values: - * @arg RCC_DFSDM2AUDIOCLKSOURCE_I2S1: CK_I2S_PCLK1 selected as audio clock - * @arg RCC_DFSDM2AUDIOCLKSOURCE_I2S2: CK_I2S_PCLK2 selected as audio clock - */ -#define __HAL_RCC_GET_DFSDM2AUDIO_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM2ASEL)) - -/** @brief Macro to configure SAI1BlockA clock source selection. - * @note The SAI peripheral is only available with STM32F413xx/STM32F423xx Devices. - * @note This function must be called before enabling PLLSAI, PLLI2S and - * the SAI clock. - * @param __SOURCE__ specifies the SAI Block A clock source. - * This parameter can be one of the following values: - * @arg RCC_SAIACLKSOURCE_PLLI2SR: PLLI2S_R clock divided (R2) used as SAI1 Block A clock. - * @arg RCC_SAIACLKSOURCE_EXT: External clock mapped on the I2S_CKIN pinused as SAI1 Block A clock. - * @arg RCC_SAIACLKSOURCE_PLLR: PLL_R clock divided (R1) used as SAI1 Block A clock. - * @arg RCC_SAIACLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1ASRC, (__SOURCE__))) - -/** @brief Macro to Get SAI1 BlockA clock source selection. - * @note This configuration is only available with STM32F413xx/STM32F423xx Devices. - * @retval The clock source can be one of the following values: - * @arg RCC_SAIACLKSOURCE_PLLI2SR: PLLI2S_R clock divided (R2) used as SAI1 Block A clock. - * @arg RCC_SAIACLKSOURCE_EXT: External clock mapped on the I2S_CKIN pinused as SAI1 Block A clock. - * @arg RCC_SAIACLKSOURCE_PLLR: PLL_R clock divided (R1) used as SAI1 Block A clock. - * @arg RCC_SAIACLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_GET_SAI_BLOCKA_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI1ASRC)) - -/** @brief Macro to configure SAI1 BlockB clock source selection. - * @note The SAI peripheral is only available with STM32F413xx/STM32F423xx Devices. - * @note This function must be called before enabling PLLSAI, PLLI2S and - * the SAI clock. - * @param __SOURCE__ specifies the SAI Block B clock source. - * This parameter can be one of the following values: - * @arg RCC_SAIBCLKSOURCE_PLLI2SR: PLLI2S_R clock divided (R2) used as SAI1 Block A clock. - * @arg RCC_SAIBCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 Block A clock. - * @arg RCC_SAIBCLKSOURCE_PLLR: PLL_R clock divided (R1) used as SAI1 Block A clock. - * @arg RCC_SAIBCLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1BSRC, (__SOURCE__))) - -/** @brief Macro to Get SAI1 BlockB clock source selection. - * @note This configuration is only available with STM32F413xx/STM32F423xx Devices. - * @retval The clock source can be one of the following values: - * @arg RCC_SAIBCLKSOURCE_PLLI2SR: PLLI2S_R clock divided (R2) used as SAI1 Block A clock. - * @arg RCC_SAIBCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 Block A clock. - * @arg RCC_SAIBCLKSOURCE_PLLR: PLL_R clock divided (R1) used as SAI1 Block A clock. - * @arg RCC_SAIBCLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_GET_SAI_BLOCKB_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI1BSRC)) - -/** @brief Macro to configure the LPTIM1 clock. - * @param __SOURCE__ specifies the LPTIM1 clock source. - * This parameter can be one of the following values: - * @arg RCC_LPTIM1CLKSOURCE_PCLK1: PCLK selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_HSI: HSI clock selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock - */ -#define __HAL_RCC_LPTIM1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the LPTIM1 clock. - * @retval The clock source can be one of the following values: - * @arg RCC_LPTIM1CLKSOURCE_PCLK1: PCLK selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_HSI: HSI clock selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock - */ -#define __HAL_RCC_GET_LPTIM1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL)) -#endif /* STM32F413xx || STM32F423xx */ - -/** @brief Macro to configure I2S APB1 clock source selection. - * @param __SOURCE__ specifies the I2S APB1 clock source. - * This parameter can be one of the following values: - * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR. - * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin. - * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR. - * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_I2S_APB1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC, (__SOURCE__))) - -/** @brief Macro to Get I2S APB1 clock source selection. - * @retval The clock source can be one of the following values: - * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR. - * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin. - * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR. - * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_GET_I2S_APB1_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC)) - -/** @brief Macro to configure I2S APB2 clock source selection. - * @param __SOURCE__ specifies the I2S APB2 clock source. - * This parameter can be one of the following values: - * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR. - * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin. - * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR. - * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_I2S_APB2_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC, (__SOURCE__))) - -/** @brief Macro to Get I2S APB2 clock source selection. - * @retval The clock source can be one of the following values: - * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR. - * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin. - * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR. - * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_GET_I2S_APB2_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC)) - -/** @brief Macro to configure the PLL I2S clock source (PLLI2SCLK). - * @note This macro must be called before enabling the I2S APB clock. - * @param __SOURCE__ specifies the I2S clock source. - * This parameter can be one of the following values: - * @arg RCC_PLLI2SCLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - * @arg RCC_PLLI2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin - * used as I2S clock source. - */ -#define __HAL_RCC_PLL_I2S_CONFIG(__SOURCE__) (*(__IO uint32_t *) RCC_PLLI2SCFGR_PLLI2SSRC_BB = (__SOURCE__)) - -/** @brief Macro to configure the FMPI2C1 clock. - * @param __SOURCE__ specifies the FMPI2C1 clock source. - * This parameter can be one of the following values: - * @arg RCC_FMPI2C1CLKSOURCE_PCLK1: PCLK1 selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock - */ -#define __HAL_RCC_FMPI2C1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the FMPI2C1 clock. - * @retval The clock source can be one of the following values: - * @arg RCC_FMPI2C1CLKSOURCE_PCLK1: PCLK1 selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock - */ -#define __HAL_RCC_GET_FMPI2C1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL)) - -/** @brief Macro to configure the CLK48 clock. - * @param __SOURCE__ specifies the CLK48 clock source. - * This parameter can be one of the following values: - * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock. - * @arg RCC_CLK48CLKSOURCE_PLLI2SQ: PLLI2S VCO Output divided by PLLI2SQ used as CLK48 clock. - */ -#define __HAL_RCC_CLK48_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the CLK48 clock. - * @retval The clock source can be one of the following values: - * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock. - * @arg RCC_CLK48CLKSOURCE_PLLI2SQ: PLLI2S VCO Output divided by PLLI2SQ used as CLK48 clock - */ -#define __HAL_RCC_GET_CLK48_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL)) - -/** @brief Macro to configure the SDIO clock. - * @param __SOURCE__ specifies the SDIO clock source. - * This parameter can be one of the following values: - * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock. - * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock. - */ -#define __HAL_RCC_SDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the SDIO clock. - * @retval The clock source can be one of the following values: - * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock. - * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock. - */ -#define __HAL_RCC_GET_SDIO_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL)) - -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -/** @brief Macro to configure I2S clock source selection. - * @param __SOURCE__ specifies the I2S clock source. - * This parameter can be one of the following values: - * @arg RCC_I2SAPBCLKSOURCE_PLLR: PLL VCO output clock divided by PLLR. - * @arg RCC_I2SAPBCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin. - * @arg RCC_I2SAPBCLKSOURCE_PLLSRC: HSI/HSE depends on PLLSRC. - */ -#define __HAL_RCC_I2S_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2SSRC, (__SOURCE__))) - -/** @brief Macro to Get I2S clock source selection. - * @retval The clock source can be one of the following values: - * @arg RCC_I2SAPBCLKSOURCE_PLLR: PLL VCO output clock divided by PLLR. - * @arg RCC_I2SAPBCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin. - * @arg RCC_I2SAPBCLKSOURCE_PLLSRC: HSI/HSE depends on PLLSRC. - */ -#define __HAL_RCC_GET_I2S_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2SSRC)) - -/** @brief Macro to configure the FMPI2C1 clock. - * @param __SOURCE__ specifies the FMPI2C1 clock source. - * This parameter can be one of the following values: - * @arg RCC_FMPI2C1CLKSOURCE_PCLK1: PCLK1 selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock - */ -#define __HAL_RCC_FMPI2C1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the FMPI2C1 clock. - * @retval The clock source can be one of the following values: - * @arg RCC_FMPI2C1CLKSOURCE_PCLK1: PCLK1 selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock - * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock - */ -#define __HAL_RCC_GET_FMPI2C1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL)) - -/** @brief Macro to configure the LPTIM1 clock. - * @param __SOURCE__ specifies the LPTIM1 clock source. - * This parameter can be one of the following values: - * @arg RCC_LPTIM1CLKSOURCE_PCLK1: PCLK1 selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_HSI: HSI clock selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock - */ -#define __HAL_RCC_LPTIM1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the LPTIM1 clock. - * @retval The clock source can be one of the following values: - * @arg RCC_LPTIM1CLKSOURCE_PCLK1: PCLK1 selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_HSI: HSI clock selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock - * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock - */ -#define __HAL_RCC_GET_LPTIM1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL)) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ - defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ - defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/** @brief Macro to configure the Timers clocks prescalers - * @note This feature is only available with STM32F429x/439x Devices. - * @param __PRESC__ specifies the Timers clocks prescalers selection - * This parameter can be one of the following values: - * @arg RCC_TIMPRES_DESACTIVATED: The Timers kernels clocks prescaler is - * equal to HPRE if PPREx is corresponding to division by 1 or 2, - * else it is equal to [(HPRE * PPREx) / 2] if PPREx is corresponding to - * division by 4 or more. - * @arg RCC_TIMPRES_ACTIVATED: The Timers kernels clocks prescaler is - * equal to HPRE if PPREx is corresponding to division by 1, 2 or 4, - * else it is equal to [(HPRE * PPREx) / 4] if PPREx is corresponding - * to division by 8 or more. - */ -#define __HAL_RCC_TIMCLKPRESCALER(__PRESC__) (*(__IO uint32_t *) RCC_DCKCFGR_TIMPRE_BB = (__PRESC__)) - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx) || STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE ||\ - STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx ||\ - STM32F423xx */ - -/*----------------------------------------------------------------------------*/ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** @brief Enable PLLSAI_RDY interrupt. - */ -#define __HAL_RCC_PLLSAI_ENABLE_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYIE)) - -/** @brief Disable PLLSAI_RDY interrupt. - */ -#define __HAL_RCC_PLLSAI_DISABLE_IT() (RCC->CIR &= ~(RCC_CIR_PLLSAIRDYIE)) - -/** @brief Clear the PLLSAI RDY interrupt pending bits. - */ -#define __HAL_RCC_PLLSAI_CLEAR_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYF)) - -/** @brief Check the PLLSAI RDY interrupt has occurred or not. - * @retval The new state (TRUE or FALSE). - */ -#define __HAL_RCC_PLLSAI_GET_IT() ((RCC->CIR & (RCC_CIR_PLLSAIRDYIE)) == (RCC_CIR_PLLSAIRDYIE)) - -/** @brief Check PLLSAI RDY flag is set or not. - * @retval The new state (TRUE or FALSE). - */ -#define __HAL_RCC_PLLSAI_GET_FLAG() ((RCC->CR & (RCC_CR_PLLSAIRDY)) == (RCC_CR_PLLSAIRDY)) - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -/** @brief Macros to enable or disable the RCC MCO1 feature. - */ -#define __HAL_RCC_MCO1_ENABLE() (*(__IO uint32_t *) RCC_CFGR_MCO1EN_BB = ENABLE) -#define __HAL_RCC_MCO1_DISABLE() (*(__IO uint32_t *) RCC_CFGR_MCO1EN_BB = DISABLE) - -/** @brief Macros to enable or disable the RCC MCO2 feature. - */ -#define __HAL_RCC_MCO2_ENABLE() (*(__IO uint32_t *) RCC_CFGR_MCO2EN_BB = ENABLE) -#define __HAL_RCC_MCO2_DISABLE() (*(__IO uint32_t *) RCC_CFGR_MCO2EN_BB = DISABLE) - -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup RCCEx_Exported_Functions - * @{ - */ - -/** @addtogroup RCCEx_Exported_Functions_Group1 - * @{ - */ -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); - -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk); - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) ||\ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\ - defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\ - defined(STM32F423xx) -void HAL_RCCEx_SelectLSEMode(uint8_t Mode); -#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ -#if defined(RCC_PLLI2S_SUPPORT) -HAL_StatusTypeDef HAL_RCCEx_EnablePLLI2S(RCC_PLLI2SInitTypeDef *PLLI2SInit); -HAL_StatusTypeDef HAL_RCCEx_DisablePLLI2S(void); -#endif /* RCC_PLLI2S_SUPPORT */ -#if defined(RCC_PLLSAI_SUPPORT) -HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI(RCC_PLLSAIInitTypeDef *PLLSAIInit); -HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI(void); -#endif /* RCC_PLLSAI_SUPPORT */ -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup RCCEx_Private_Constants RCCEx Private Constants - * @{ - */ - -/** @defgroup RCCEx_BitAddress_AliasRegion RCC BitAddress AliasRegion - * @brief RCC registers bit address in the alias region - * @{ - */ -/* --- CR Register ---*/ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -/* Alias word address of PLLSAION bit */ -#define RCC_PLLSAION_BIT_NUMBER 0x1CU -#define RCC_CR_PLLSAION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_PLLSAION_BIT_NUMBER * 4U)) - -#define PLLSAI_TIMEOUT_VALUE 2U /* Timeout value fixed to 2 ms */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ - defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/* Alias word address of PLLI2SON bit */ -#define RCC_PLLI2SON_BIT_NUMBER 0x1AU -#define RCC_CR_PLLI2SON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_PLLI2SON_BIT_NUMBER * 4U)) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || - STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || - STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -/* --- DCKCFGR Register ---*/ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F401xC) ||\ - defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ - defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ - defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -/* Alias word address of TIMPRE bit */ -#define RCC_DCKCFGR_OFFSET (RCC_OFFSET + 0x8CU) -#define RCC_TIMPRE_BIT_NUMBER 0x18U -#define RCC_DCKCFGR_TIMPRE_BB (PERIPH_BB_BASE + (RCC_DCKCFGR_OFFSET * 32U) + (RCC_TIMPRE_BIT_NUMBER * 4U)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F410xx || STM32F401xC ||\ - STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\ - STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -/* --- CFGR Register ---*/ -#define RCC_CFGR_OFFSET (RCC_OFFSET + 0x08U) -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ - defined(STM32F469xx) || defined(STM32F479xx) -/* Alias word address of I2SSRC bit */ -#define RCC_I2SSRC_BIT_NUMBER 0x17U -#define RCC_CFGR_I2SSRC_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32U) + (RCC_I2SSRC_BIT_NUMBER * 4U)) - -#define PLLI2S_TIMEOUT_VALUE 2U /* Timeout value fixed to 2 ms */ -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || - STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ - defined(STM32F413xx) || defined(STM32F423xx) -/* --- PLLI2SCFGR Register ---*/ -#define RCC_PLLI2SCFGR_OFFSET (RCC_OFFSET + 0x84U) -/* Alias word address of PLLI2SSRC bit */ -#define RCC_PLLI2SSRC_BIT_NUMBER 0x16U -#define RCC_PLLI2SCFGR_PLLI2SSRC_BB (PERIPH_BB_BASE + (RCC_PLLI2SCFGR_OFFSET * 32U) + (RCC_PLLI2SSRC_BIT_NUMBER * 4U)) - -#define PLLI2S_TIMEOUT_VALUE 2U /* Timeout value fixed to 2 ms */ -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx | STM32F423xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -/* Alias word address of MCO1EN bit */ -#define RCC_MCO1EN_BIT_NUMBER 0x8U -#define RCC_CFGR_MCO1EN_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32U) + (RCC_MCO1EN_BIT_NUMBER * 4U)) - -/* Alias word address of MCO2EN bit */ -#define RCC_MCO2EN_BIT_NUMBER 0x9U -#define RCC_CFGR_MCO2EN_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32U) + (RCC_MCO2EN_BIT_NUMBER * 4U)) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#define PLL_TIMEOUT_VALUE 2U /* 2 ms */ -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup RCCEx_Private_Macros RCCEx Private Macros - * @{ - */ -/** @defgroup RCCEx_IS_RCC_Definitions RCC Private macros to check input parameters - * @{ - */ -#define IS_RCC_PLLN_VALUE(VALUE) ((50U <= (VALUE)) && ((VALUE) <= 432U)) -#define IS_RCC_PLLI2SN_VALUE(VALUE) ((50U <= (VALUE)) && ((VALUE) <= 432U)) - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) -#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x0000007FU)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) -#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x00000007U)) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) -#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x0000000FU)) -#endif /* STM32F401xC || STM32F401xE || STM32F411xE */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x0000001FU)) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#if defined(STM32F446xx) -#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x00000FFFU)) -#endif /* STM32F446xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) -#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x000001FFU)) -#endif /* STM32F469xx || STM32F479xx */ - -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) -#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x000003FFU)) -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ - -#if defined(STM32F413xx) || defined(STM32F423xx) -#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x00007FFFU)) -#endif /* STM32F413xx || STM32F423xx */ - -#define IS_RCC_PLLI2SR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U)) - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\ - defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) -#define IS_RCC_PLLI2SQ_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 15U)) - -#define IS_RCC_PLLSAIN_VALUE(VALUE) ((50U <= (VALUE)) && ((VALUE) <= 432U)) - -#define IS_RCC_PLLSAIQ_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 15U)) - -#define IS_RCC_PLLSAIR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U)) - -#define IS_RCC_PLLSAI_DIVQ_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 32U)) - -#define IS_RCC_PLLI2S_DIVQ_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 32U)) - -#define IS_RCC_PLLSAI_DIVR_VALUE(VALUE) (((VALUE) == RCC_PLLSAIDIVR_2) ||\ - ((VALUE) == RCC_PLLSAIDIVR_4) ||\ - ((VALUE) == RCC_PLLSAIDIVR_8) ||\ - ((VALUE) == RCC_PLLSAIDIVR_16)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ - -#if defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) -#define IS_RCC_PLLI2SM_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 63U)) - -#define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\ - ((MODE) == RCC_LSE_HIGHDRIVE_MODE)) -#endif /* STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U)) - -#define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\ - ((MODE) == RCC_LSE_HIGHDRIVE_MODE)) - -#define IS_RCC_FMPI2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_FMPI2C1CLKSOURCE_PCLK1) ||\ - ((SOURCE) == RCC_FMPI2C1CLKSOURCE_SYSCLK) ||\ - ((SOURCE) == RCC_FMPI2C1CLKSOURCE_HSI)) - -#define IS_RCC_LPTIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_LPTIM1CLKSOURCE_PCLK1) ||\ - ((SOURCE) == RCC_LPTIM1CLKSOURCE_HSI) ||\ - ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSI) ||\ - ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSE)) - -#define IS_RCC_I2SAPBCLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPBCLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_I2SAPBCLKSOURCE_EXT) ||\ - ((SOURCE) == RCC_I2SAPBCLKSOURCE_PLLSRC)) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ - -#if defined(STM32F446xx) -#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U)) - -#define IS_RCC_PLLI2SP_VALUE(VALUE) (((VALUE) == RCC_PLLI2SP_DIV2) ||\ - ((VALUE) == RCC_PLLI2SP_DIV4) ||\ - ((VALUE) == RCC_PLLI2SP_DIV6) ||\ - ((VALUE) == RCC_PLLI2SP_DIV8)) - -#define IS_RCC_PLLSAIM_VALUE(VALUE) ((VALUE) <= 63U) - -#define IS_RCC_PLLSAIP_VALUE(VALUE) (((VALUE) == RCC_PLLSAIP_DIV2) ||\ - ((VALUE) == RCC_PLLSAIP_DIV4) ||\ - ((VALUE) == RCC_PLLSAIP_DIV6) ||\ - ((VALUE) == RCC_PLLSAIP_DIV8)) - -#define IS_RCC_SAI1CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI1CLKSOURCE_PLLSAI) ||\ - ((SOURCE) == RCC_SAI1CLKSOURCE_PLLI2S) ||\ - ((SOURCE) == RCC_SAI1CLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_SAI1CLKSOURCE_EXT)) - -#define IS_RCC_SAI2CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI2CLKSOURCE_PLLSAI) ||\ - ((SOURCE) == RCC_SAI2CLKSOURCE_PLLI2S) ||\ - ((SOURCE) == RCC_SAI2CLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_SAI2CLKSOURCE_PLLSRC)) - -#define IS_RCC_I2SAPB1CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLI2S) ||\ - ((SOURCE) == RCC_I2SAPB1CLKSOURCE_EXT) ||\ - ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLSRC)) - - #define IS_RCC_I2SAPB2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLI2S) ||\ - ((SOURCE) == RCC_I2SAPB2CLKSOURCE_EXT) ||\ - ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLSRC)) - -#define IS_RCC_FMPI2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_FMPI2C1CLKSOURCE_PCLK1) ||\ - ((SOURCE) == RCC_FMPI2C1CLKSOURCE_SYSCLK) ||\ - ((SOURCE) == RCC_FMPI2C1CLKSOURCE_HSI)) - -#define IS_RCC_CECCLKSOURCE(SOURCE) (((SOURCE) == RCC_CECCLKSOURCE_HSI) ||\ - ((SOURCE) == RCC_CECCLKSOURCE_LSE)) - -#define IS_RCC_CLK48CLKSOURCE(SOURCE) (((SOURCE) == RCC_CLK48CLKSOURCE_PLLQ) ||\ - ((SOURCE) == RCC_CLK48CLKSOURCE_PLLSAIP)) - -#define IS_RCC_SDIOCLKSOURCE(SOURCE) (((SOURCE) == RCC_SDIOCLKSOURCE_CLK48) ||\ - ((SOURCE) == RCC_SDIOCLKSOURCE_SYSCLK)) - -#define IS_RCC_SPDIFRXCLKSOURCE(SOURCE) (((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLLI2SP)) -#endif /* STM32F446xx */ - -#if defined(STM32F469xx) || defined(STM32F479xx) -#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U)) - -#define IS_RCC_PLLSAIP_VALUE(VALUE) (((VALUE) == RCC_PLLSAIP_DIV2) ||\ - ((VALUE) == RCC_PLLSAIP_DIV4) ||\ - ((VALUE) == RCC_PLLSAIP_DIV6) ||\ - ((VALUE) == RCC_PLLSAIP_DIV8)) - -#define IS_RCC_CLK48CLKSOURCE(SOURCE) (((SOURCE) == RCC_CLK48CLKSOURCE_PLLQ) ||\ - ((SOURCE) == RCC_CLK48CLKSOURCE_PLLSAIP)) - -#define IS_RCC_SDIOCLKSOURCE(SOURCE) (((SOURCE) == RCC_SDIOCLKSOURCE_CLK48) ||\ - ((SOURCE) == RCC_SDIOCLKSOURCE_SYSCLK)) - -#define IS_RCC_DSIBYTELANECLKSOURCE(SOURCE) (((SOURCE) == RCC_DSICLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_DSICLKSOURCE_DSIPHY)) - -#define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\ - ((MODE) == RCC_LSE_HIGHDRIVE_MODE)) -#endif /* STM32F469xx || STM32F479xx */ - -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ - defined(STM32F413xx) || defined(STM32F423xx) -#define IS_RCC_PLLI2SQ_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 15U)) - -#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U)) - -#define IS_RCC_PLLI2SCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_PLLI2SCLKSOURCE_PLLSRC) || \ - ((__SOURCE__) == RCC_PLLI2SCLKSOURCE_EXT)) - -#define IS_RCC_I2SAPB1CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLI2S) ||\ - ((SOURCE) == RCC_I2SAPB1CLKSOURCE_EXT) ||\ - ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLSRC)) - - #define IS_RCC_I2SAPB2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLI2S) ||\ - ((SOURCE) == RCC_I2SAPB2CLKSOURCE_EXT) ||\ - ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLSRC)) - -#define IS_RCC_FMPI2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_FMPI2C1CLKSOURCE_PCLK1) ||\ - ((SOURCE) == RCC_FMPI2C1CLKSOURCE_SYSCLK) ||\ - ((SOURCE) == RCC_FMPI2C1CLKSOURCE_HSI)) - -#define IS_RCC_CLK48CLKSOURCE(SOURCE) (((SOURCE) == RCC_CLK48CLKSOURCE_PLLQ) ||\ - ((SOURCE) == RCC_CLK48CLKSOURCE_PLLI2SQ)) - -#define IS_RCC_SDIOCLKSOURCE(SOURCE) (((SOURCE) == RCC_SDIOCLKSOURCE_CLK48) ||\ - ((SOURCE) == RCC_SDIOCLKSOURCE_SYSCLK)) - -#define IS_RCC_DFSDM1CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_DFSDM1CLKSOURCE_PCLK2) || \ - ((__SOURCE__) == RCC_DFSDM1CLKSOURCE_SYSCLK)) - -#define IS_RCC_DFSDM1AUDIOCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_DFSDM1AUDIOCLKSOURCE_I2S1) || \ - ((__SOURCE__) == RCC_DFSDM1AUDIOCLKSOURCE_I2S2)) - -#if defined(STM32F413xx) || defined(STM32F423xx) -#define IS_RCC_DFSDM2CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_DFSDM2CLKSOURCE_PCLK2) || \ - ((__SOURCE__) == RCC_DFSDM2CLKSOURCE_SYSCLK)) - -#define IS_RCC_DFSDM2AUDIOCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_DFSDM2AUDIOCLKSOURCE_I2S1) || \ - ((__SOURCE__) == RCC_DFSDM2AUDIOCLKSOURCE_I2S2)) - -#define IS_RCC_LPTIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_LPTIM1CLKSOURCE_PCLK1) ||\ - ((SOURCE) == RCC_LPTIM1CLKSOURCE_HSI) ||\ - ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSI) ||\ - ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSE)) - -#define IS_RCC_SAIACLKSOURCE(SOURCE) (((SOURCE) == RCC_SAIACLKSOURCE_PLLI2SR) ||\ - ((SOURCE) == RCC_SAIACLKSOURCE_EXT) ||\ - ((SOURCE) == RCC_SAIACLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_SAIACLKSOURCE_PLLSRC)) - -#define IS_RCC_SAIBCLKSOURCE(SOURCE) (((SOURCE) == RCC_SAIBCLKSOURCE_PLLI2SR) ||\ - ((SOURCE) == RCC_SAIBCLKSOURCE_EXT) ||\ - ((SOURCE) == RCC_SAIBCLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_SAIBCLKSOURCE_PLLSRC)) - -#define IS_RCC_PLL_DIVR_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 32U)) - -#define IS_RCC_PLLI2S_DIVR_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 32U)) - -#endif /* STM32F413xx || STM32F423xx */ -#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ - defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ - defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) - -#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2SOURCE_SYSCLK) || ((SOURCE) == RCC_MCO2SOURCE_PLLI2SCLK)|| \ - ((SOURCE) == RCC_MCO2SOURCE_HSE) || ((SOURCE) == RCC_MCO2SOURCE_PLLCLK)) - -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || - STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || \ - STM32F412Rx */ - -#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) -#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2SOURCE_SYSCLK) || ((SOURCE) == RCC_MCO2SOURCE_I2SCLK)|| \ - ((SOURCE) == RCC_MCO2SOURCE_HSE) || ((SOURCE) == RCC_MCO2SOURCE_PLLCLK)) -#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_RCC_EX_H */ - +/** + ****************************************************************************** + * @file stm32f4xx_hal_rcc_ex.h + * @author MCD Application Team + * @brief Header file of RCC HAL Extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_RCC_EX_H +#define __STM32F4xx_HAL_RCC_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Types RCCEx Exported Types + * @{ + */ + +/** + * @brief RCC PLL configuration structure definition + */ +typedef struct +{ + uint32_t PLLState; /*!< The new state of the PLL. + This parameter can be a value of @ref RCC_PLL_Config */ + + uint32_t PLLSource; /*!< RCC_PLLSource: PLL entry clock source. + This parameter must be a value of @ref RCC_PLL_Clock_Source */ + + uint32_t PLLM; /*!< PLLM: Division factor for PLL VCO input clock. + This parameter must be a number between Min_Data = 0 and Max_Data = 63 */ + + uint32_t PLLN; /*!< PLLN: Multiplication factor for PLL VCO output clock. + This parameter must be a number between Min_Data = 50 and Max_Data = 432 + except for STM32F411xE devices where the Min_Data = 192 */ + + uint32_t PLLP; /*!< PLLP: Division factor for main system clock (SYSCLK). + This parameter must be a value of @ref RCC_PLLP_Clock_Divider */ + + uint32_t PLLQ; /*!< PLLQ: Division factor for OTG FS, SDIO and RNG clocks. + This parameter must be a number between Min_Data = 2 and Max_Data = 15 */ +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F469xx) ||\ + defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ + defined(STM32F413xx) || defined(STM32F423xx) + uint32_t PLLR; /*!< PLLR: PLL division factor for I2S, SAI, SYSTEM, SPDIFRX clocks. + This parameter is only available in STM32F410xx/STM32F446xx/STM32F469xx/STM32F479xx + and STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx/STM32F413xx/STM32F423xx devices. + This parameter must be a number between Min_Data = 2 and Max_Data = 7 */ +#endif /* STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ +}RCC_PLLInitTypeDef; + +#if defined(STM32F446xx) +/** + * @brief PLLI2S Clock structure definition + */ +typedef struct +{ + uint32_t PLLI2SM; /*!< Specifies division factor for PLL VCO input clock. + This parameter must be a number between Min_Data = 2 and Max_Data = 63 */ + + uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. + This parameter must be a number between Min_Data = 50 and Max_Data = 432 */ + + uint32_t PLLI2SP; /*!< Specifies division factor for SPDIFRX Clock. + This parameter must be a value of @ref RCCEx_PLLI2SP_Clock_Divider */ + + uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI clock. + This parameter must be a number between Min_Data = 2 and Max_Data = 15. + This parameter will be used only when PLLI2S is selected as Clock Source SAI */ + + uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock. + This parameter must be a number between Min_Data = 2 and Max_Data = 7. + This parameter will be used only when PLLI2S is selected as Clock Source I2S */ +}RCC_PLLI2SInitTypeDef; + +/** + * @brief PLLSAI Clock structure definition + */ +typedef struct +{ + uint32_t PLLSAIM; /*!< Specifies division factor for PLL VCO input clock. + This parameter must be a number between Min_Data = 2 and Max_Data = 63 */ + + uint32_t PLLSAIN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. + This parameter must be a number between Min_Data = 50 and Max_Data = 432 */ + + uint32_t PLLSAIP; /*!< Specifies division factor for OTG FS, SDIO and RNG clocks. + This parameter must be a value of @ref RCCEx_PLLSAIP_Clock_Divider */ + + uint32_t PLLSAIQ; /*!< Specifies the division factor for SAI clock. + This parameter must be a number between Min_Data = 2 and Max_Data = 15. + This parameter will be used only when PLLSAI is selected as Clock Source SAI */ +}RCC_PLLSAIInitTypeDef; + +/** + * @brief RCC extended clocks structure definition + */ +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters. + This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ + + RCC_PLLSAIInitTypeDef PLLSAI; /*!< PLL SAI structure parameters. + This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */ + + uint32_t PLLI2SDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock. + This parameter must be a number between Min_Data = 1 and Max_Data = 32 + This parameter will be used only when PLLI2S is selected as Clock Source SAI */ + + uint32_t PLLSAIDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock. + This parameter must be a number between Min_Data = 1 and Max_Data = 32 + This parameter will be used only when PLLSAI is selected as Clock Source SAI */ + + uint32_t Sai1ClockSelection; /*!< Specifies SAI1 Clock Source Selection. + This parameter can be a value of @ref RCCEx_SAI1_Clock_Source */ + + uint32_t Sai2ClockSelection; /*!< Specifies SAI2 Clock Source Selection. + This parameter can be a value of @ref RCCEx_SAI2_Clock_Source */ + + uint32_t I2sApb1ClockSelection; /*!< Specifies I2S APB1 Clock Source Selection. + This parameter can be a value of @ref RCCEx_I2SAPB1_Clock_Source */ + + uint32_t I2sApb2ClockSelection; /*!< Specifies I2S APB2 Clock Source Selection. + This parameter can be a value of @ref RCCEx_I2SAPB2_Clock_Source */ + + uint32_t RTCClockSelection; /*!< Specifies RTC Clock Source Selection. + This parameter can be a value of @ref RCC_RTC_Clock_Source */ + + uint32_t SdioClockSelection; /*!< Specifies SDIO Clock Source Selection. + This parameter can be a value of @ref RCCEx_SDIO_Clock_Source */ + + uint32_t CecClockSelection; /*!< Specifies CEC Clock Source Selection. + This parameter can be a value of @ref RCCEx_CEC_Clock_Source */ + + uint32_t Fmpi2c1ClockSelection; /*!< Specifies FMPI2C1 Clock Source Selection. + This parameter can be a value of @ref RCCEx_FMPI2C1_Clock_Source */ + + uint32_t SpdifClockSelection; /*!< Specifies SPDIFRX Clock Source Selection. + This parameter can be a value of @ref RCCEx_SPDIFRX_Clock_Source */ + + uint32_t Clk48ClockSelection; /*!< Specifies CLK48 Clock Selection this clock used OTG FS, SDIO and RNG clocks. + This parameter can be a value of @ref RCCEx_CLK48_Clock_Source */ + + uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection. + This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */ +}RCC_PeriphCLKInitTypeDef; +#endif /* STM32F446xx */ + +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) +/** + * @brief RCC extended clocks structure definition + */ +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + uint32_t I2SClockSelection; /*!< Specifies RTC Clock Source Selection. + This parameter can be a value of @ref RCCEx_I2S_APB_Clock_Source */ + + uint32_t RTCClockSelection; /*!< Specifies RTC Clock Source Selection. + This parameter can be a value of @ref RCC_RTC_Clock_Source */ + + uint32_t Lptim1ClockSelection; /*!< Specifies LPTIM1 Clock Source Selection. + This parameter can be a value of @ref RCCEx_LPTIM1_Clock_Source */ + + uint32_t Fmpi2c1ClockSelection; /*!< Specifies FMPI2C1 Clock Source Selection. + This parameter can be a value of @ref RCCEx_FMPI2C1_Clock_Source */ + + uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection. + This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */ +}RCC_PeriphCLKInitTypeDef; +#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ + +#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +/** + * @brief PLLI2S Clock structure definition + */ +typedef struct +{ + uint32_t PLLI2SM; /*!< Specifies division factor for PLL VCO input clock. + This parameter must be a number between Min_Data = 2 and Max_Data = 63 */ + + uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. + This parameter must be a number between Min_Data = 50 and Max_Data = 432 */ + + uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI clock. + This parameter must be a number between Min_Data = 2 and Max_Data = 15. + This parameter will be used only when PLLI2S is selected as Clock Source SAI */ + + uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock. + This parameter must be a number between Min_Data = 2 and Max_Data = 7. + This parameter will be used only when PLLI2S is selected as Clock Source I2S */ +}RCC_PLLI2SInitTypeDef; + +/** + * @brief RCC extended clocks structure definition + */ +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters. + This parameter will be used only when PLLI2S is selected as Clock Source I2S */ + +#if defined(STM32F413xx) || defined(STM32F423xx) + uint32_t PLLDivR; /*!< Specifies the PLL division factor for SAI1 clock. + This parameter must be a number between Min_Data = 1 and Max_Data = 32 + This parameter will be used only when PLL is selected as Clock Source SAI */ + + uint32_t PLLI2SDivR; /*!< Specifies the PLLI2S division factor for SAI1 clock. + This parameter must be a number between Min_Data = 1 and Max_Data = 32 + This parameter will be used only when PLLI2S is selected as Clock Source SAI */ +#endif /* STM32F413xx || STM32F423xx */ + + uint32_t I2sApb1ClockSelection; /*!< Specifies I2S APB1 Clock Source Selection. + This parameter can be a value of @ref RCCEx_I2SAPB1_Clock_Source */ + + uint32_t I2sApb2ClockSelection; /*!< Specifies I2S APB2 Clock Source Selection. + This parameter can be a value of @ref RCCEx_I2SAPB2_Clock_Source */ + + uint32_t RTCClockSelection; /*!< Specifies RTC Clock Source Selection. + This parameter can be a value of @ref RCC_RTC_Clock_Source */ + + uint32_t SdioClockSelection; /*!< Specifies SDIO Clock Source Selection. + This parameter can be a value of @ref RCCEx_SDIO_Clock_Source */ + + uint32_t Fmpi2c1ClockSelection; /*!< Specifies FMPI2C1 Clock Source Selection. + This parameter can be a value of @ref RCCEx_FMPI2C1_Clock_Source */ + + uint32_t Clk48ClockSelection; /*!< Specifies CLK48 Clock Selection this clock used OTG FS, SDIO and RNG clocks. + This parameter can be a value of @ref RCCEx_CLK48_Clock_Source */ + + uint32_t Dfsdm1ClockSelection; /*!< Specifies DFSDM1 Clock Selection. + This parameter can be a value of @ref RCCEx_DFSDM1_Kernel_Clock_Source */ + + uint32_t Dfsdm1AudioClockSelection;/*!< Specifies DFSDM1 Audio Clock Selection. + This parameter can be a value of @ref RCCEx_DFSDM1_Audio_Clock_Source */ + +#if defined(STM32F413xx) || defined(STM32F423xx) + uint32_t Dfsdm2ClockSelection; /*!< Specifies DFSDM2 Clock Selection. + This parameter can be a value of @ref RCCEx_DFSDM2_Kernel_Clock_Source */ + + uint32_t Dfsdm2AudioClockSelection;/*!< Specifies DFSDM2 Audio Clock Selection. + This parameter can be a value of @ref RCCEx_DFSDM2_Audio_Clock_Source */ + + uint32_t Lptim1ClockSelection; /*!< Specifies LPTIM1 Clock Source Selection. + This parameter can be a value of @ref RCCEx_LPTIM1_Clock_Source */ + + uint32_t SaiAClockSelection; /*!< Specifies SAI1_A Clock Prescalers Selection + This parameter can be a value of @ref RCCEx_SAI1_BlockA_Clock_Source */ + + uint32_t SaiBClockSelection; /*!< Specifies SAI1_B Clock Prescalers Selection + This parameter can be a value of @ref RCCEx_SAI1_BlockB_Clock_Source */ +#endif /* STM32F413xx || STM32F423xx */ + + uint32_t PLLI2SSelection; /*!< Specifies PLL I2S Clock Source Selection. + This parameter can be a value of @ref RCCEx_PLL_I2S_Clock_Source */ + + uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection. + This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */ +}RCC_PeriphCLKInitTypeDef; +#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) + +/** + * @brief PLLI2S Clock structure definition + */ +typedef struct +{ + uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. + This parameter must be a number between Min_Data = 50 and Max_Data = 432. + This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ + + uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock. + This parameter must be a number between Min_Data = 2 and Max_Data = 7. + This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ + + uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI1 clock. + This parameter must be a number between Min_Data = 2 and Max_Data = 15. + This parameter will be used only when PLLI2S is selected as Clock Source SAI */ +}RCC_PLLI2SInitTypeDef; + +/** + * @brief PLLSAI Clock structure definition + */ +typedef struct +{ + uint32_t PLLSAIN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. + This parameter must be a number between Min_Data = 50 and Max_Data = 432. + This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */ +#if defined(STM32F469xx) || defined(STM32F479xx) + uint32_t PLLSAIP; /*!< Specifies division factor for OTG FS and SDIO clocks. + This parameter is only available in STM32F469xx/STM32F479xx devices. + This parameter must be a value of @ref RCCEx_PLLSAIP_Clock_Divider */ +#endif /* STM32F469xx || STM32F479xx */ + + uint32_t PLLSAIQ; /*!< Specifies the division factor for SAI1 clock. + This parameter must be a number between Min_Data = 2 and Max_Data = 15. + This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */ + + uint32_t PLLSAIR; /*!< specifies the division factor for LTDC clock + This parameter must be a number between Min_Data = 2 and Max_Data = 7. + This parameter will be used only when PLLSAI is selected as Clock Source LTDC */ + +}RCC_PLLSAIInitTypeDef; + +/** + * @brief RCC extended clocks structure definition + */ +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters. + This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ + + RCC_PLLSAIInitTypeDef PLLSAI; /*!< PLL SAI structure parameters. + This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */ + + uint32_t PLLI2SDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock. + This parameter must be a number between Min_Data = 1 and Max_Data = 32 + This parameter will be used only when PLLI2S is selected as Clock Source SAI */ + + uint32_t PLLSAIDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock. + This parameter must be a number between Min_Data = 1 and Max_Data = 32 + This parameter will be used only when PLLSAI is selected as Clock Source SAI */ + + uint32_t PLLSAIDivR; /*!< Specifies the PLLSAI division factor for LTDC clock. + This parameter must be one value of @ref RCCEx_PLLSAI_DIVR */ + + uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection. + This parameter can be a value of @ref RCC_RTC_Clock_Source */ + + uint8_t TIMPresSelection; /*!< Specifies TIM Clock Prescalers Selection. + This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */ +#if defined(STM32F469xx) || defined(STM32F479xx) + uint32_t Clk48ClockSelection; /*!< Specifies CLK48 Clock Selection this clock used OTG FS, SDIO and RNG clocks. + This parameter can be a value of @ref RCCEx_CLK48_Clock_Source */ + + uint32_t SdioClockSelection; /*!< Specifies SDIO Clock Source Selection. + This parameter can be a value of @ref RCCEx_SDIO_Clock_Source */ +#endif /* STM32F469xx || STM32F479xx */ +}RCC_PeriphCLKInitTypeDef; + +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ + defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) +/** + * @brief PLLI2S Clock structure definition + */ +typedef struct +{ +#if defined(STM32F411xE) + uint32_t PLLI2SM; /*!< PLLM: Division factor for PLLI2S VCO input clock. + This parameter must be a number between Min_Data = 2 and Max_Data = 62 */ +#endif /* STM32F411xE */ + + uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. + This parameter must be a number between Min_Data = 50 and Max_Data = 432 + Except for STM32F411xE devices where the Min_Data = 192. + This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ + + uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock. + This parameter must be a number between Min_Data = 2 and Max_Data = 7. + This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ + +}RCC_PLLI2SInitTypeDef; + +/** + * @brief RCC extended clocks structure definition + */ +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters. + This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ + + uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection. + This parameter can be a value of @ref RCC_RTC_Clock_Source */ +#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) + uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection. + This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */ +#endif /* STM32F401xC || STM32F401xE || STM32F411xE */ +}RCC_PeriphCLKInitTypeDef; +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants + * @{ + */ + +/** @defgroup RCCEx_Periph_Clock_Selection RCC Periph Clock Selection + * @{ + */ +/* Peripheral Clock source for STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx */ +#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ + defined(STM32F413xx) || defined(STM32F423xx) +#define RCC_PERIPHCLK_I2S_APB1 0x00000001U +#define RCC_PERIPHCLK_I2S_APB2 0x00000002U +#define RCC_PERIPHCLK_TIM 0x00000004U +#define RCC_PERIPHCLK_RTC 0x00000008U +#define RCC_PERIPHCLK_FMPI2C1 0x00000010U +#define RCC_PERIPHCLK_CLK48 0x00000020U +#define RCC_PERIPHCLK_SDIO 0x00000040U +#define RCC_PERIPHCLK_PLLI2S 0x00000080U +#define RCC_PERIPHCLK_DFSDM1 0x00000100U +#define RCC_PERIPHCLK_DFSDM1_AUDIO 0x00000200U +#endif /* STM32F412Zx || STM32F412Vx) || STM32F412Rx || STM32F412Cx */ +#if defined(STM32F413xx) || defined(STM32F423xx) +#define RCC_PERIPHCLK_DFSDM2 0x00000400U +#define RCC_PERIPHCLK_DFSDM2_AUDIO 0x00000800U +#define RCC_PERIPHCLK_LPTIM1 0x00001000U +#define RCC_PERIPHCLK_SAIA 0x00002000U +#define RCC_PERIPHCLK_SAIB 0x00004000U +#endif /* STM32F413xx || STM32F423xx */ +/*----------------------------------------------------------------------------*/ + +/*------------------- Peripheral Clock source for STM32F410xx ----------------*/ +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) +#define RCC_PERIPHCLK_I2S 0x00000001U +#define RCC_PERIPHCLK_TIM 0x00000002U +#define RCC_PERIPHCLK_RTC 0x00000004U +#define RCC_PERIPHCLK_FMPI2C1 0x00000008U +#define RCC_PERIPHCLK_LPTIM1 0x00000010U +#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ +/*----------------------------------------------------------------------------*/ + +/*------------------- Peripheral Clock source for STM32F446xx ----------------*/ +#if defined(STM32F446xx) +#define RCC_PERIPHCLK_I2S_APB1 0x00000001U +#define RCC_PERIPHCLK_I2S_APB2 0x00000002U +#define RCC_PERIPHCLK_SAI1 0x00000004U +#define RCC_PERIPHCLK_SAI2 0x00000008U +#define RCC_PERIPHCLK_TIM 0x00000010U +#define RCC_PERIPHCLK_RTC 0x00000020U +#define RCC_PERIPHCLK_CEC 0x00000040U +#define RCC_PERIPHCLK_FMPI2C1 0x00000080U +#define RCC_PERIPHCLK_CLK48 0x00000100U +#define RCC_PERIPHCLK_SDIO 0x00000200U +#define RCC_PERIPHCLK_SPDIFRX 0x00000400U +#define RCC_PERIPHCLK_PLLI2S 0x00000800U +#endif /* STM32F446xx */ +/*-----------------------------------------------------------------------------*/ + +/*----------- Peripheral Clock source for STM32F469xx/STM32F479xx -------------*/ +#if defined(STM32F469xx) || defined(STM32F479xx) +#define RCC_PERIPHCLK_I2S 0x00000001U +#define RCC_PERIPHCLK_SAI_PLLI2S 0x00000002U +#define RCC_PERIPHCLK_SAI_PLLSAI 0x00000004U +#define RCC_PERIPHCLK_LTDC 0x00000008U +#define RCC_PERIPHCLK_TIM 0x00000010U +#define RCC_PERIPHCLK_RTC 0x00000020U +#define RCC_PERIPHCLK_PLLI2S 0x00000040U +#define RCC_PERIPHCLK_CLK48 0x00000080U +#define RCC_PERIPHCLK_SDIO 0x00000100U +#endif /* STM32F469xx || STM32F479xx */ +/*----------------------------------------------------------------------------*/ + +/*-------- Peripheral Clock source for STM32F42xxx/STM32F43xxx ---------------*/ +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) +#define RCC_PERIPHCLK_I2S 0x00000001U +#define RCC_PERIPHCLK_SAI_PLLI2S 0x00000002U +#define RCC_PERIPHCLK_SAI_PLLSAI 0x00000004U +#define RCC_PERIPHCLK_LTDC 0x00000008U +#define RCC_PERIPHCLK_TIM 0x00000010U +#define RCC_PERIPHCLK_RTC 0x00000020U +#define RCC_PERIPHCLK_PLLI2S 0x00000040U +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ +/*----------------------------------------------------------------------------*/ + +/*-------- Peripheral Clock source for STM32F40xxx/STM32F41xxx ---------------*/ +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\ + defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) +#define RCC_PERIPHCLK_I2S 0x00000001U +#define RCC_PERIPHCLK_RTC 0x00000002U +#define RCC_PERIPHCLK_PLLI2S 0x00000004U +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */ +#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) +#define RCC_PERIPHCLK_TIM 0x00000008U +#endif /* STM32F401xC || STM32F401xE || STM32F411xE */ +/*----------------------------------------------------------------------------*/ +/** + * @} + */ +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ + defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ + defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F469xx) || \ + defined(STM32F479xx) +/** @defgroup RCCEx_I2S_Clock_Source I2S Clock Source + * @{ + */ +#define RCC_I2SCLKSOURCE_PLLI2S 0x00000000U +#define RCC_I2SCLKSOURCE_EXT 0x00000001U +/** + * @} + */ +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || + STM32F401xC || STM32F401xE || STM32F411xE || STM32F469xx || STM32F479xx */ + +/** @defgroup RCCEx_PLLSAI_DIVR RCC PLLSAI DIVR + * @{ + */ +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) ||\ + defined(STM32F469xx) || defined(STM32F479xx) +#define RCC_PLLSAIDIVR_2 0x00000000U +#define RCC_PLLSAIDIVR_4 0x00010000U +#define RCC_PLLSAIDIVR_8 0x00020000U +#define RCC_PLLSAIDIVR_16 0x00030000U +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ +/** + * @} + */ + +/** @defgroup RCCEx_PLLI2SP_Clock_Divider RCC PLLI2SP Clock Divider + * @{ + */ +#if defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ + defined(STM32F412Rx) || defined(STM32F412Cx) +#define RCC_PLLI2SP_DIV2 0x00000002U +#define RCC_PLLI2SP_DIV4 0x00000004U +#define RCC_PLLI2SP_DIV6 0x00000006U +#define RCC_PLLI2SP_DIV8 0x00000008U +#endif /* STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ +/** + * @} + */ + +/** @defgroup RCCEx_PLLSAIP_Clock_Divider RCC PLLSAIP Clock Divider + * @{ + */ +#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) +#define RCC_PLLSAIP_DIV2 0x00000002U +#define RCC_PLLSAIP_DIV4 0x00000004U +#define RCC_PLLSAIP_DIV6 0x00000006U +#define RCC_PLLSAIP_DIV8 0x00000008U +#endif /* STM32F446xx || STM32F469xx || STM32F479xx */ +/** + * @} + */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) +/** @defgroup RCCEx_SAI_BlockA_Clock_Source RCC SAI BlockA Clock Source + * @{ + */ +#define RCC_SAIACLKSOURCE_PLLSAI 0x00000000U +#define RCC_SAIACLKSOURCE_PLLI2S 0x00100000U +#define RCC_SAIACLKSOURCE_EXT 0x00200000U +/** + * @} + */ + +/** @defgroup RCCEx_SAI_BlockB_Clock_Source RCC SAI BlockB Clock Source + * @{ + */ +#define RCC_SAIBCLKSOURCE_PLLSAI 0x00000000U +#define RCC_SAIBCLKSOURCE_PLLI2S 0x00400000U +#define RCC_SAIBCLKSOURCE_EXT 0x00800000U +/** + * @} + */ +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ + +#if defined(STM32F469xx) || defined(STM32F479xx) +/** @defgroup RCCEx_CLK48_Clock_Source RCC CLK48 Clock Source + * @{ + */ +#define RCC_CLK48CLKSOURCE_PLLQ 0x00000000U +#define RCC_CLK48CLKSOURCE_PLLSAIP ((uint32_t)RCC_DCKCFGR_CK48MSEL) +/** + * @} + */ + +/** @defgroup RCCEx_SDIO_Clock_Source RCC SDIO Clock Source + * @{ + */ +#define RCC_SDIOCLKSOURCE_CLK48 0x00000000U +#define RCC_SDIOCLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR_SDIOSEL) +/** + * @} + */ + +/** @defgroup RCCEx_DSI_Clock_Source RCC DSI Clock Source + * @{ + */ +#define RCC_DSICLKSOURCE_DSIPHY 0x00000000U +#define RCC_DSICLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_DSISEL) +/** + * @} + */ +#endif /* STM32F469xx || STM32F479xx */ + +#if defined(STM32F446xx) +/** @defgroup RCCEx_SAI1_Clock_Source RCC SAI1 Clock Source + * @{ + */ +#define RCC_SAI1CLKSOURCE_PLLSAI 0x00000000U +#define RCC_SAI1CLKSOURCE_PLLI2S ((uint32_t)RCC_DCKCFGR_SAI1SRC_0) +#define RCC_SAI1CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_SAI1SRC_1) +#define RCC_SAI1CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_SAI1SRC) +/** + * @} + */ + +/** @defgroup RCCEx_SAI2_Clock_Source RCC SAI2 Clock Source + * @{ + */ +#define RCC_SAI2CLKSOURCE_PLLSAI 0x00000000U +#define RCC_SAI2CLKSOURCE_PLLI2S ((uint32_t)RCC_DCKCFGR_SAI2SRC_0) +#define RCC_SAI2CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_SAI2SRC_1) +#define RCC_SAI2CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_SAI2SRC) +/** + * @} + */ + +/** @defgroup RCCEx_I2SAPB1_Clock_Source RCC I2S APB1 Clock Source + * @{ + */ +#define RCC_I2SAPB1CLKSOURCE_PLLI2S 0x00000000U +#define RCC_I2SAPB1CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S1SRC_0) +#define RCC_I2SAPB1CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S1SRC_1) +#define RCC_I2SAPB1CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S1SRC) +/** + * @} + */ + +/** @defgroup RCCEx_I2SAPB2_Clock_Source RCC I2S APB2 Clock Source + * @{ + */ +#define RCC_I2SAPB2CLKSOURCE_PLLI2S 0x00000000U +#define RCC_I2SAPB2CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S2SRC_0) +#define RCC_I2SAPB2CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S2SRC_1) +#define RCC_I2SAPB2CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S2SRC) +/** + * @} + */ + +/** @defgroup RCCEx_FMPI2C1_Clock_Source RCC FMPI2C1 Clock Source + * @{ + */ +#define RCC_FMPI2C1CLKSOURCE_PCLK1 0x00000000U +#define RCC_FMPI2C1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_0) +#define RCC_FMPI2C1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_1) +/** + * @} + */ + +/** @defgroup RCCEx_CEC_Clock_Source RCC CEC Clock Source + * @{ + */ +#define RCC_CECCLKSOURCE_HSI 0x00000000U +#define RCC_CECCLKSOURCE_LSE ((uint32_t)RCC_DCKCFGR2_CECSEL) +/** + * @} + */ + +/** @defgroup RCCEx_CLK48_Clock_Source RCC CLK48 Clock Source + * @{ + */ +#define RCC_CLK48CLKSOURCE_PLLQ 0x00000000U +#define RCC_CLK48CLKSOURCE_PLLSAIP ((uint32_t)RCC_DCKCFGR2_CK48MSEL) +/** + * @} + */ + +/** @defgroup RCCEx_SDIO_Clock_Source RCC SDIO Clock Source + * @{ + */ +#define RCC_SDIOCLKSOURCE_CLK48 0x00000000U +#define RCC_SDIOCLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_SDIOSEL) +/** + * @} + */ + +/** @defgroup RCCEx_SPDIFRX_Clock_Source RCC SPDIFRX Clock Source + * @{ + */ +#define RCC_SPDIFRXCLKSOURCE_PLLR 0x00000000U +#define RCC_SPDIFRXCLKSOURCE_PLLI2SP ((uint32_t)RCC_DCKCFGR2_SPDIFRXSEL) +/** + * @} + */ + +#endif /* STM32F446xx */ + +#if defined(STM32F413xx) || defined(STM32F423xx) +/** @defgroup RCCEx_SAI1_BlockA_Clock_Source RCC SAI BlockA Clock Source + * @{ + */ +#define RCC_SAIACLKSOURCE_PLLI2SR 0x00000000U +#define RCC_SAIACLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_SAI1ASRC_0) +#define RCC_SAIACLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_SAI1ASRC_1) +#define RCC_SAIACLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_SAI1ASRC_0 | RCC_DCKCFGR_SAI1ASRC_1) +/** + * @} + */ + +/** @defgroup RCCEx_SAI1_BlockB_Clock_Source RCC SAI BlockB Clock Source + * @{ + */ +#define RCC_SAIBCLKSOURCE_PLLI2SR 0x00000000U +#define RCC_SAIBCLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_SAI1BSRC_0) +#define RCC_SAIBCLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_SAI1BSRC_1) +#define RCC_SAIBCLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_SAI1BSRC_0 | RCC_DCKCFGR_SAI1BSRC_1) +/** + * @} + */ + +/** @defgroup RCCEx_LPTIM1_Clock_Source RCC LPTIM1 Clock Source + * @{ + */ +#define RCC_LPTIM1CLKSOURCE_PCLK1 0x00000000U +#define RCC_LPTIM1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_0) +#define RCC_LPTIM1CLKSOURCE_LSI ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_1) +#define RCC_LPTIM1CLKSOURCE_LSE ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_0 | RCC_DCKCFGR2_LPTIM1SEL_1) +/** + * @} + */ + + +/** @defgroup RCCEx_DFSDM2_Audio_Clock_Source RCC DFSDM2 Audio Clock Source + * @{ + */ +#define RCC_DFSDM2AUDIOCLKSOURCE_I2S1 0x00000000U +#define RCC_DFSDM2AUDIOCLKSOURCE_I2S2 ((uint32_t)RCC_DCKCFGR_CKDFSDM2ASEL) +/** + * @} + */ + +/** @defgroup RCCEx_DFSDM2_Kernel_Clock_Source RCC DFSDM2 Kernel Clock Source + * @{ + */ +#define RCC_DFSDM2CLKSOURCE_PCLK2 0x00000000U +#define RCC_DFSDM2CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR_CKDFSDM1SEL) +/** + * @} + */ + +#endif /* STM32F413xx || STM32F423xx */ + +#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +/** @defgroup RCCEx_PLL_I2S_Clock_Source PLL I2S Clock Source + * @{ + */ +#define RCC_PLLI2SCLKSOURCE_PLLSRC 0x00000000U +#define RCC_PLLI2SCLKSOURCE_EXT ((uint32_t)RCC_PLLI2SCFGR_PLLI2SSRC) +/** + * @} + */ + +/** @defgroup RCCEx_DFSDM1_Audio_Clock_Source RCC DFSDM1 Audio Clock Source + * @{ + */ +#define RCC_DFSDM1AUDIOCLKSOURCE_I2S1 0x00000000U +#define RCC_DFSDM1AUDIOCLKSOURCE_I2S2 ((uint32_t)RCC_DCKCFGR_CKDFSDM1ASEL) +/** + * @} + */ + +/** @defgroup RCCEx_DFSDM1_Kernel_Clock_Source RCC DFSDM1 Kernel Clock Source + * @{ + */ +#define RCC_DFSDM1CLKSOURCE_PCLK2 0x00000000U +#define RCC_DFSDM1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR_CKDFSDM1SEL) +/** + * @} + */ + +/** @defgroup RCCEx_I2SAPB1_Clock_Source RCC I2S APB1 Clock Source + * @{ + */ +#define RCC_I2SAPB1CLKSOURCE_PLLI2S 0x00000000U +#define RCC_I2SAPB1CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S1SRC_0) +#define RCC_I2SAPB1CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S1SRC_1) +#define RCC_I2SAPB1CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S1SRC) +/** + * @} + */ + +/** @defgroup RCCEx_I2SAPB2_Clock_Source RCC I2S APB2 Clock Source + * @{ + */ +#define RCC_I2SAPB2CLKSOURCE_PLLI2S 0x00000000U +#define RCC_I2SAPB2CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S2SRC_0) +#define RCC_I2SAPB2CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S2SRC_1) +#define RCC_I2SAPB2CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S2SRC) +/** + * @} + */ + +/** @defgroup RCCEx_FMPI2C1_Clock_Source RCC FMPI2C1 Clock Source + * @{ + */ +#define RCC_FMPI2C1CLKSOURCE_PCLK1 0x00000000U +#define RCC_FMPI2C1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_0) +#define RCC_FMPI2C1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_1) +/** + * @} + */ + +/** @defgroup RCCEx_CLK48_Clock_Source RCC CLK48 Clock Source + * @{ + */ +#define RCC_CLK48CLKSOURCE_PLLQ 0x00000000U +#define RCC_CLK48CLKSOURCE_PLLI2SQ ((uint32_t)RCC_DCKCFGR2_CK48MSEL) +/** + * @} + */ + +/** @defgroup RCCEx_SDIO_Clock_Source RCC SDIO Clock Source + * @{ + */ +#define RCC_SDIOCLKSOURCE_CLK48 0x00000000U +#define RCC_SDIOCLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_SDIOSEL) +/** + * @} + */ +#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ + +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) + +/** @defgroup RCCEx_I2S_APB_Clock_Source RCC I2S APB Clock Source + * @{ + */ +#define RCC_I2SAPBCLKSOURCE_PLLR 0x00000000U +#define RCC_I2SAPBCLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2SSRC_0) +#define RCC_I2SAPBCLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2SSRC_1) +/** + * @} + */ + +/** @defgroup RCCEx_FMPI2C1_Clock_Source RCC FMPI2C1 Clock Source + * @{ + */ +#define RCC_FMPI2C1CLKSOURCE_PCLK1 0x00000000U +#define RCC_FMPI2C1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_0) +#define RCC_FMPI2C1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_1) +/** + * @} + */ + +/** @defgroup RCCEx_LPTIM1_Clock_Source RCC LPTIM1 Clock Source + * @{ + */ +#define RCC_LPTIM1CLKSOURCE_PCLK1 0x00000000U +#define RCC_LPTIM1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_0) +#define RCC_LPTIM1CLKSOURCE_LSI ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_1) +#define RCC_LPTIM1CLKSOURCE_LSE ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_0 | RCC_DCKCFGR2_LPTIM1SEL_1) +/** + * @} + */ +#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ + defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ + defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ + defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ + defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +/** @defgroup RCCEx_TIM_PRescaler_Selection RCC TIM PRescaler Selection + * @{ + */ +#define RCC_TIMPRES_DESACTIVATED ((uint8_t)0x00) +#define RCC_TIMPRES_ACTIVATED ((uint8_t)0x01) +/** + * @} + */ +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE ||\ + STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\ + STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ + +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) ||\ + defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\ + defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\ + defined(STM32F423xx) +/** @defgroup RCCEx_LSE_Dual_Mode_Selection RCC LSE Dual Mode Selection + * @{ + */ +#define RCC_LSE_LOWPOWER_MODE ((uint8_t)0x00) +#define RCC_LSE_HIGHDRIVE_MODE ((uint8_t)0x01) +/** + * @} + */ +#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||\ + STM32F412Rx || STM32F412Cx */ + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ + defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ + defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ + defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ + defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) +/** @defgroup RCC_MCO2_Clock_Source MCO2 Clock Source + * @{ + */ +#define RCC_MCO2SOURCE_SYSCLK 0x00000000U +#define RCC_MCO2SOURCE_PLLI2SCLK RCC_CFGR_MCO2_0 +#define RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2_1 +#define RCC_MCO2SOURCE_PLLCLK RCC_CFGR_MCO2 +/** + * @} + */ +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || + STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || + STM32F412Rx || STM32F413xx | STM32F423xx */ + +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) +/** @defgroup RCC_MCO2_Clock_Source MCO2 Clock Source + * @{ + */ +#define RCC_MCO2SOURCE_SYSCLK 0x00000000U +#define RCC_MCO2SOURCE_I2SCLK RCC_CFGR_MCO2_0 +#define RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2_1 +#define RCC_MCO2SOURCE_PLLCLK RCC_CFGR_MCO2 +/** + * @} + */ +#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros + * @{ + */ +/*------------------- STM32F42xxx/STM32F43xxx/STM32F469xx/STM32F479xx --------*/ +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) +/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable + * @brief Enables or disables the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOJ_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOK_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_DMA2D_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_ETHMACPTP_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) +#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) +#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN)) +#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN)) +#define __HAL_RCC_GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN)) +#define __HAL_RCC_GPIOJ_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOJEN)) +#define __HAL_RCC_GPIOK_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOKEN)) +#define __HAL_RCC_DMA2D_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2DEN)) +#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN)) +#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN)) +#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN)) +#define __HAL_RCC_ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN)) +#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN)) +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN)) +#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN)) +#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN)) +#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) + +/** + * @brief Enable ETHERNET clock. + */ +#define __HAL_RCC_ETH_CLK_ENABLE() do { \ + __HAL_RCC_ETHMAC_CLK_ENABLE(); \ + __HAL_RCC_ETHMACTX_CLK_ENABLE(); \ + __HAL_RCC_ETHMACRX_CLK_ENABLE(); \ + } while(0U) +/** + * @brief Disable ETHERNET clock. + */ +#define __HAL_RCC_ETH_CLK_DISABLE() do { \ + __HAL_RCC_ETHMACTX_CLK_DISABLE(); \ + __HAL_RCC_ETHMACRX_CLK_DISABLE(); \ + __HAL_RCC_ETHMAC_CLK_DISABLE(); \ + } while(0U) +/** + * @} + */ + +/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET) +#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET) +#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET) +#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET) +#define __HAL_RCC_GPIOI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) != RESET) +#define __HAL_RCC_GPIOJ_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOJEN)) != RESET) +#define __HAL_RCC_GPIOK_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOKEN)) != RESET) +#define __HAL_RCC_DMA2D_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2DEN)) != RESET) +#define __HAL_RCC_ETHMAC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) != RESET) +#define __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) != RESET) +#define __HAL_RCC_ETHMACRX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) != RESET) +#define __HAL_RCC_ETHMACPTP_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) != RESET) +#define __HAL_RCC_USB_OTG_HS_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) != RESET) +#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) != RESET) +#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET) +#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET) +#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) +#define __HAL_RCC_ETH_IS_CLK_ENABLED() (__HAL_RCC_ETHMAC_IS_CLK_ENABLED() && \ + __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() && \ + __HAL_RCC_ETHMACRX_IS_CLK_ENABLED()) + +#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET) +#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET) +#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET) +#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET) +#define __HAL_RCC_GPIOI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) == RESET) +#define __HAL_RCC_GPIOJ_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOJEN)) == RESET) +#define __HAL_RCC_GPIOK_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOKEN)) == RESET) +#define __HAL_RCC_DMA2D_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2DEN)) == RESET) +#define __HAL_RCC_ETHMAC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) == RESET) +#define __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) == RESET) +#define __HAL_RCC_ETHMACRX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) == RESET) +#define __HAL_RCC_ETHMACPTP_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) == RESET) +#define __HAL_RCC_USB_OTG_HS_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) == RESET) +#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) == RESET) +#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET) +#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET) +#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) +#define __HAL_RCC_ETH_IS_CLK_DISABLED() (__HAL_RCC_ETHMAC_IS_CLK_DISABLED() && \ + __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() && \ + __HAL_RCC_ETHMACRX_IS_CLK_DISABLED()) +/** + * @} + */ + +/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable + * @brief Enable or disable the AHB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + #define __HAL_RCC_DCMI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN)) + +#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx) +#define __HAL_RCC_CRYP_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_HASH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN)) +#define __HAL_RCC_HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN)) +#endif /* STM32F437xx || STM32F439xx || STM32F479xx */ + +#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\ + __HAL_RCC_SYSCFG_CLK_ENABLE();\ + }while(0U) + +#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN)) + +#define __HAL_RCC_RNG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) != RESET) +#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) == RESET) + +#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx) +#define __HAL_RCC_CRYP_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) != RESET) +#define __HAL_RCC_CRYP_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) == RESET) + +#define __HAL_RCC_HASH_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) != RESET) +#define __HAL_RCC_HASH_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) == RESET) +#endif /* STM32F437xx || STM32F439xx || STM32F479xx */ + +#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET) +#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET) + +#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET) +#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET) +/** + * @} + */ + +/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable + * @brief Enables or disables the AHB3 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_FMC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN)) +#if defined(STM32F469xx) || defined(STM32F479xx) +#define __HAL_RCC_QSPI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN)) +#endif /* STM32F469xx || STM32F479xx */ +/** + * @} + */ + + +/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the AHB3 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_FMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) != RESET) +#define __HAL_RCC_FMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) == RESET) +#if defined(STM32F469xx) || defined(STM32F479xx) +#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET) +#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET) +#endif /* STM32F469xx || STM32F479xx */ +/** + * @} + */ + +/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable + * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_USART3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_UART4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_UART5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_CAN2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_DAC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_UART7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_UART8_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) +#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) +#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) +#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) +#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN)) +#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) +#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) +#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) +#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) +#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) +#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) +#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) +#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) +#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN)) +#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN)) +#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) +#define __HAL_RCC_UART7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART7EN)) +#define __HAL_RCC_UART8_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART8EN)) +/** + * @} + */ + +/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) +#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) +#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) +#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) +#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET) +#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) +#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET) +#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET) +#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET) +#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET) +#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET) +#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET) +#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET) +#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET) +#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET) +#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) +#define __HAL_RCC_UART7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) != RESET) +#define __HAL_RCC_UART8_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) != RESET) + +#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) +#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) +#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) +#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) +#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET) +#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) +#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET) +#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET) +#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET) +#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET) +#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET) +#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET) +#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET) +#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET) +#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET) +#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) +#define __HAL_RCC_UART7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) == RESET) +#define __HAL_RCC_UART8_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) == RESET) +/** + * @} + */ + +/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable + * @brief Enable or disable the High Speed APB (APB2) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_ADC2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_ADC3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SPI5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SPI6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SAI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN)) +#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN)) +#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) +#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN)) +#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN)) +#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN)) +#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN)) +#define __HAL_RCC_SPI6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI6EN)) +#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN)) + +#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) +#define __HAL_RCC_LTDC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_LTDC_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_LTDCEN)) +#endif /* STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ + +#if defined(STM32F469xx) || defined(STM32F479xx) +#define __HAL_RCC_DSI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_DSI_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DSIEN)) +#endif /* STM32F469xx || STM32F479xx */ +/** + * @} + */ + +/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET) +#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET) +#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET) +#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET) +#define __HAL_RCC_SPI6_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI6EN)) != RESET) +#define __HAL_RCC_SAI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) != RESET) +#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET) +#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET) +#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN))!= RESET) + +#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET) +#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET) +#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN))== RESET) +#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET) +#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET) +#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET) +#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET) +#define __HAL_RCC_SPI6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI6EN)) == RESET) +#define __HAL_RCC_SAI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) == RESET) + +#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) +#define __HAL_RCC_LTDC_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_LTDCEN)) != RESET) +#define __HAL_RCC_LTDC_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_LTDCEN)) == RESET) +#endif /* STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ + +#if defined(STM32F469xx) || defined(STM32F479xx) +#define __HAL_RCC_DSI_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DSIEN)) != RESET) +#define __HAL_RCC_DSI_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DSIEN)) == RESET) +#endif /* STM32F469xx || STM32F479xx */ +/** + * @} + */ + +/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset + * @brief Force or release AHB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST)) +#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST)) +#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST)) +#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST)) +#define __HAL_RCC_GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST)) +#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST)) +#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST)) +#define __HAL_RCC_GPIOJ_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOJRST)) +#define __HAL_RCC_GPIOK_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOKRST)) +#define __HAL_RCC_DMA2D_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2DRST)) +#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) + +#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST)) +#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST)) +#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST)) +#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST)) +#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST)) +#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST)) +#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST)) +#define __HAL_RCC_GPIOJ_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOJRST)) +#define __HAL_RCC_GPIOK_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOKRST)) +#define __HAL_RCC_DMA2D_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2DRST)) +#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset + * @brief Force or release AHB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST)) +#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST)) +#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST)) + +#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U) +#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST)) +#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST)) +#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST)) + +#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx) +#define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST)) +#define __HAL_RCC_HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST)) + +#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST)) +#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST)) +#endif /* STM32F437xx || STM32F439xx || STM32F479xx */ +/** + * @} + */ + +/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset + * @brief Force or release AHB3 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U) +#define __HAL_RCC_FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST)) +#define __HAL_RCC_FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST)) + +#if defined(STM32F469xx) || defined(STM32F479xx) +#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST)) +#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST)) +#endif /* STM32F469xx || STM32F479xx */ +/** + * @} + */ + +/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset + * @brief Force or release APB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) +#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) +#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) +#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) +#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) +#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) +#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) +#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) +#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST)) +#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST)) +#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) +#define __HAL_RCC_UART7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART7RST)) +#define __HAL_RCC_UART8_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART8RST)) +#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) +#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) +#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) +#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) +#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST)) + +#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) +#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) +#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) +#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) +#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST)) +#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) +#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) +#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) +#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) +#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) +#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) +#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) +#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) +#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST)) +#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST)) +#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) +#define __HAL_RCC_UART7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART7RST)) +#define __HAL_RCC_UART8_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART8RST)) +/** + * @} + */ + +/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset + * @brief Force or release APB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST)) +#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST)) +#define __HAL_RCC_SPI6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI6RST)) +#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST)) +#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST)) +#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST)) +#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) + +#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST)) +#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST)) +#define __HAL_RCC_TIM10_RELEASE_RESET()(RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) +#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST)) +#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST)) +#define __HAL_RCC_SPI6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI6RST)) +#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST)) + +#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) +#define __HAL_RCC_LTDC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_LTDCRST)) +#define __HAL_RCC_LTDC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_LTDCRST)) +#endif /* STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */ + +#if defined(STM32F469xx) || defined(STM32F479xx) +#define __HAL_RCC_DSI_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DSIRST)) +#define __HAL_RCC_DSI_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DSIRST)) +#endif /* STM32F469xx || STM32F479xx */ +/** + * @} + */ + +/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable + * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN)) +#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN)) +#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN)) +#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN)) +#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN)) +#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN)) +#define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN)) +#define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN)) +#define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN)) +#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN)) +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN)) +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN)) +#define __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOJLPEN)) +#define __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOKLPEN)) +#define __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM3LPEN)) +#define __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2DLPEN)) +#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) +#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) +#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) +#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN)) + +#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN)) +#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN)) +#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN)) +#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN)) +#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN)) +#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN)) +#define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN)) +#define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN)) +#define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN)) +#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN)) +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN)) +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN)) +#define __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOJLPEN)) +#define __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOKLPEN)) +#define __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2DLPEN)) +#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) +#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) +#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) +#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable + * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN)) +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN)) + +#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN)) +#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN)) + +#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN)) +#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN)) + +#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx) +#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN)) +#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN)) + +#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN)) +#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN)) +#endif /* STM32F437xx || STM32F439xx || STM32F479xx */ +/** + * @} + */ + +/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable + * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN)) +#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN)) + +#if defined(STM32F469xx) || defined(STM32F479xx) +#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN)) +#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN)) +#endif /* STM32F469xx || STM32F479xx */ +/** + * @} + */ + +/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable + * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN)) +#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN)) +#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN)) +#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN)) +#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN)) +#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN)) +#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN)) +#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN)) +#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN)) +#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN)) +#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN)) +#define __HAL_RCC_UART7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART7LPEN)) +#define __HAL_RCC_UART8_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART8LPEN)) +#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN)) +#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN)) +#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN)) +#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) +#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN)) + +#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN)) +#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN)) +#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN)) +#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) +#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN)) +#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN)) +#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN)) +#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN)) +#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN)) +#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN)) +#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN)) +#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN)) +#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN)) +#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN)) +#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN)) +#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN)) +#define __HAL_RCC_UART7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART7LPEN)) +#define __HAL_RCC_UART8_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART8LPEN)) +/** + * @} + */ + +/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable + * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN)) +#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN)) +#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN)) +#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN)) +#define __HAL_RCC_SPI6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI6LPEN)) +#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN)) +#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN)) +#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN)) +#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE()(RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN)) + +#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN)) +#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN)) +#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE()(RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN)) +#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN)) +#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN)) +#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN)) +#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN)) +#define __HAL_RCC_SPI6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI6LPEN)) +#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN)) + +#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) +#define __HAL_RCC_LTDC_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_LTDCLPEN)) + +#define __HAL_RCC_LTDC_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_LTDCLPEN)) +#endif /* STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ + +#if defined(STM32F469xx) || defined(STM32F479xx) +#define __HAL_RCC_DSI_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_DSILPEN)) +#define __HAL_RCC_DSI_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_DSILPEN)) +#endif /* STM32F469xx || STM32F479xx */ +/** + * @} + */ +#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */ +/*----------------------------------------------------------------------------*/ + +/*----------------------------------- STM32F40xxx/STM32F41xxx-----------------*/ +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) +/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable + * @brief Enables or disables the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) +#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) +#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN)) +#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN)) +#define __HAL_RCC_GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN)) +#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN)) +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN)) +#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN)) +#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN)) +#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) +#if defined(STM32F407xx)|| defined(STM32F417xx) +/** + * @brief Enable ETHERNET clock. + */ +#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_ETHMACPTP_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_ETH_CLK_ENABLE() do { \ + __HAL_RCC_ETHMAC_CLK_ENABLE(); \ + __HAL_RCC_ETHMACTX_CLK_ENABLE(); \ + __HAL_RCC_ETHMACRX_CLK_ENABLE(); \ + } while(0U) + +/** + * @brief Disable ETHERNET clock. + */ +#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN)) +#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN)) +#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN)) +#define __HAL_RCC_ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN)) +#define __HAL_RCC_ETH_CLK_DISABLE() do { \ + __HAL_RCC_ETHMACTX_CLK_DISABLE(); \ + __HAL_RCC_ETHMACRX_CLK_DISABLE(); \ + __HAL_RCC_ETHMAC_CLK_DISABLE(); \ + } while(0U) +#endif /* STM32F407xx || STM32F417xx */ +/** + * @} + */ + +/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET) +#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET) +#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) +#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET) +#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET) +#define __HAL_RCC_GPIOI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) != RESET) +#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET) +#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET) +#define __HAL_RCC_USB_OTG_HS_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) != RESET) +#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) != RESET) + +#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET) +#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET) +#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET) +#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET) +#define __HAL_RCC_GPIOI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) == RESET) +#define __HAL_RCC_USB_OTG_HS_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) == RESET) +#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN))== RESET) +#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET) +#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET) +#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) +#if defined(STM32F407xx)|| defined(STM32F417xx) +/** + * @brief Enable ETHERNET clock. + */ +#define __HAL_RCC_ETHMAC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) != RESET) +#define __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) != RESET) +#define __HAL_RCC_ETHMACRX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) != RESET) +#define __HAL_RCC_ETHMACPTP_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) != RESET) +#define __HAL_RCC_ETH_IS_CLK_ENABLED() (__HAL_RCC_ETHMAC_IS_CLK_ENABLED() && \ + __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() && \ + __HAL_RCC_ETHMACRX_IS_CLK_ENABLED()) +/** + * @brief Disable ETHERNET clock. + */ +#define __HAL_RCC_ETHMAC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) == RESET) +#define __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) == RESET) +#define __HAL_RCC_ETHMACRX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) == RESET) +#define __HAL_RCC_ETHMACPTP_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) == RESET) +#define __HAL_RCC_ETH_IS_CLK_DISABLED() (__HAL_RCC_ETHMAC_IS_CLK_DISABLED() && \ + __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() && \ + __HAL_RCC_ETHMACRX_IS_CLK_DISABLED()) +#endif /* STM32F407xx || STM32F417xx */ +/** + * @} + */ + +/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable + * @brief Enable or disable the AHB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\ + __HAL_RCC_SYSCFG_CLK_ENABLE();\ + }while(0U) + +#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN)) + +#define __HAL_RCC_RNG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN)) + +#if defined(STM32F407xx)|| defined(STM32F417xx) +#define __HAL_RCC_DCMI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN)) +#endif /* STM32F407xx || STM32F417xx */ + +#if defined(STM32F415xx) || defined(STM32F417xx) +#define __HAL_RCC_CRYP_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_HASH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN)) +#define __HAL_RCC_HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN)) +#endif /* STM32F415xx || STM32F417xx */ +/** + * @} + */ + + +/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the AHB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET) +#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET) + +#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET) +#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET) + +#if defined(STM32F407xx)|| defined(STM32F417xx) +#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) != RESET) +#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) == RESET) +#endif /* STM32F407xx || STM32F417xx */ + +#if defined(STM32F415xx) || defined(STM32F417xx) +#define __HAL_RCC_CRYP_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) != RESET) +#define __HAL_RCC_HASH_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) != RESET) + +#define __HAL_RCC_CRYP_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) == RESET) +#define __HAL_RCC_HASH_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) == RESET) +#endif /* STM32F415xx || STM32F417xx */ +/** + * @} + */ + +/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable + * @brief Enables or disables the AHB3 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_FSMC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_FSMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FSMCEN)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the AHB3 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_FSMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) != RESET) +#define __HAL_RCC_FSMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) == RESET) +/** + * @} + */ + +/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable + * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_USART3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_UART4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_UART5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_CAN2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_DAC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) +#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) +#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) +#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) +#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN)) +#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) +#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) +#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) +#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) +#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) +#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) +#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) +#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) +#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN)) +#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN)) +#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) +/** + * @} + */ + +/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) +#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) +#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) +#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) +#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET) +#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) +#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET) +#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET) +#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET) +#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET) +#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET) +#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET) +#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET) +#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET) +#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET) +#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) + +#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) +#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) +#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) +#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) +#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET) +#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) +#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET) +#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET) +#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET) +#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET) +#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET) +#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET) +#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET) +#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET) +#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET) +#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) + /** + * @} + */ + +/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable + * @brief Enable or disable the High Speed APB (APB2) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_ADC2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_ADC3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN)) +#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN)) +#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) +#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN)) +#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN)) +#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN)) +/** + * @} + */ + +/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET) +#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET) +#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET) +#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET) +#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET) +#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET) + +#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET) +#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET) +#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET) +#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET) +#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET) +#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET) +/** + * @} + */ + +/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset + * @brief Force or release AHB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST)) +#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST)) +#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST)) +#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST)) +#define __HAL_RCC_GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST)) +#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST)) +#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST)) +#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) + +#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST)) +#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST)) +#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST)) +#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST)) +#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST)) +#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST)) +#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST)) +#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset + * @brief Force or release AHB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U) + +#if defined(STM32F407xx)|| defined(STM32F417xx) +#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST)) +#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST)) +#endif /* STM32F407xx || STM32F417xx */ + +#if defined(STM32F415xx) || defined(STM32F417xx) +#define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST)) +#define __HAL_RCC_HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST)) + +#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST)) +#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST)) +#endif /* STM32F415xx || STM32F417xx */ + +#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST)) +#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST)) + +#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST)) +#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset + * @brief Force or release AHB3 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U) + +#define __HAL_RCC_FSMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FSMCRST)) +#define __HAL_RCC_FSMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FSMCRST)) +/** + * @} + */ + +/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset + * @brief Force or release APB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) +#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) +#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) +#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) +#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) +#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) +#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) +#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) +#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST)) +#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST)) +#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) +#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) +#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) +#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) +#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) +#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST)) + +#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) +#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) +#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) +#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) +#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST)) +#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) +#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) +#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) +#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) +#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) +#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) +#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) +#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) +#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST)) +#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST)) +#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) +/** + * @} + */ + +/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset + * @brief Force or release APB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST)) +#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST)) +#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST)) +#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) + +#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST)) +#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST)) +#define __HAL_RCC_TIM10_RELEASE_RESET()(RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) +#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable + * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN)) +#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN)) +#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN)) +#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN)) +#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN)) +#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN)) +#define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN)) +#define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN)) +#define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN)) +#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN)) +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN)) +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN)) +#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) +#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) +#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) +#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN)) + +#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN)) +#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN)) +#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN)) +#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN)) +#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN)) +#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN)) +#define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN)) +#define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN)) +#define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN)) +#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN)) +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN)) +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN)) +#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) +#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) +#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) +#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable + * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN)) +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN)) + +#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN)) +#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN)) + +#if defined(STM32F407xx)|| defined(STM32F417xx) +#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN)) +#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN)) +#endif /* STM32F407xx || STM32F417xx */ + +#if defined(STM32F415xx) || defined(STM32F417xx) +#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN)) +#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN)) + +#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN)) +#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN)) +#endif /* STM32F415xx || STM32F417xx */ +/** + * @} + */ + +/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable + * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_FSMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FSMCLPEN)) +#define __HAL_RCC_FSMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FSMCLPEN)) +/** + * @} + */ + +/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable + * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN)) +#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN)) +#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN)) +#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN)) +#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN)) +#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN)) +#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN)) +#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN)) +#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN)) +#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN)) +#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN)) +#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN)) +#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN)) +#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN)) +#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) +#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN)) + +#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN)) +#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN)) +#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN)) +#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) +#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN)) +#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN)) +#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN)) +#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN)) +#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN)) +#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN)) +#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN)) +#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN)) +#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN)) +#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN)) +#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN)) +#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN)) +/** + * @} + */ + +/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable + * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN)) +#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN)) +#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN)) +#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN)) +#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN)) +#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE()(RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN)) + +#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN)) +#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN)) +#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE()(RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN)) +#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN)) +#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN)) +#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN)) +/** + * @} + */ +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ +/*----------------------------------------------------------------------------*/ + +/*------------------------- STM32F401xE/STM32F401xC --------------------------*/ +#if defined(STM32F401xC) || defined(STM32F401xE) +/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable + * @brief Enable or disable the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) +#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) +#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) +#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET) +#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET) +#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) +#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET) + +#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET) +#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET) +#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) +#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET) +/** + * @} + */ + +/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable + * @brief Enable or disable the AHB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\ + __HAL_RCC_SYSCFG_CLK_ENABLE();\ + }while(0U) + +#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the AHB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET) +#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET) +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable + * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) +#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) +#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) +#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) +#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN)) +/** + * @} + */ + +/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) +#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) +#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) +#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) +#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET) + +#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) +#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) +#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) +#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) +#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET) +/** + * @} + */ + +/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable + * @brief Enable or disable the High Speed APB (APB2) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN)) +#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN)) +#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) +/** + * @} + */ + +/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET) +#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET) +#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET) + +#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET) +#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET) +#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET) +/** + * @} + */ +/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset + * @brief Force or release AHB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST)) +#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST)) +#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) + +#define __HAL_RCC_AHB1_RELEASE_RESET() (RCC->AHB1RSTR = 0x00U) +#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST)) +#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST)) +#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset + * @brief Force or release AHB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST)) + +#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U) +#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST)) +/** + * @} + */ + +/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset + * @brief Force or release APB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) +#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) +#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) +#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) +#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST)) + +#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00U) +#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) +#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) +#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) +#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) +#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST)) +/** + * @} + */ + +/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset + * @brief Force or release APB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST)) +#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST)) +#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) + +#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00U) +#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST)) +#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST)) +#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset + * @brief Force or release AHB3 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U) +/** + * @} + */ + +/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable + * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN)) +#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN)) +#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) +#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) +#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) + +#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN)) +#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN)) +#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) +#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) +#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable + * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN)) + +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN)) +/** + * @} + */ + +/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable + * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN)) +#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN)) +#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN)) +#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) +#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN)) + +#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN)) +#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN)) +#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN)) +#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) +#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN)) +/** + * @} + */ + +/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable + * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN)) +#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN)) +#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN)) + +#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN)) +#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN)) +#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN)) +/** + * @} + */ +#endif /* STM32F401xC || STM32F401xE*/ +/*----------------------------------------------------------------------------*/ + +/*-------------------------------- STM32F410xx -------------------------------*/ +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) +/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable + * @brief Enables or disables the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_RNG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_RNGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_RNGEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) +#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_RNGEN)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) +#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_RNGEN)) != RESET) + +#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) +#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_RNGEN)) == RESET) +/** + * @} + */ + +/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable + * @brief Enable or disable the High Speed APB (APB1) peripheral clock. + * @{ + */ +#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_LPTIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_RTCAPB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_FMPI2C1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_DAC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) +#define __HAL_RCC_RTCAPB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_RTCAPBEN)) +#define __HAL_RCC_LPTIM1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_LPTIM1EN)) +#define __HAL_RCC_FMPI2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_FMPI2C1EN)) +#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) +/** + * @} + */ + +/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) +#define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) != RESET) +#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) != RESET) +#define __HAL_RCC_FMPI2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) != RESET) +#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) + +#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) +#define __HAL_RCC_RTCAPB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) == RESET) +#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) == RESET) +#define __HAL_RCC_FMPI2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) == RESET) +#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) +/** + * @} + */ + +/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable + * @brief Enable or disable the High Speed APB (APB2) peripheral clock. + * @{ + */ +#define __HAL_RCC_SPI5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_EXTIT_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN)) +#define __HAL_RCC_EXTIT_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_EXTITEN)) +/** + * @} + */ + +/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET) +#define __HAL_RCC_EXTIT_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) != RESET) + +#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET) +#define __HAL_RCC_EXTIT_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) == RESET) +/** + * @} + */ + +/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset + * @brief Force or release AHB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) +#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_RNGRST)) +#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) +#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_RNGRST)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset + * @brief Force or release AHB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB2_FORCE_RESET() +#define __HAL_RCC_AHB2_RELEASE_RESET() +/** + * @} + */ + +/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset + * @brief Force or release AHB3 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB3_FORCE_RESET() +#define __HAL_RCC_AHB3_RELEASE_RESET() +/** + * @} + */ + +/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset + * @brief Force or release APB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) +#define __HAL_RCC_LPTIM1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_LPTIM1RST)) +#define __HAL_RCC_FMPI2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_FMPI2C1RST)) +#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) + +#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) +#define __HAL_RCC_LPTIM1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_LPTIM1RST)) +#define __HAL_RCC_FMPI2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_FMPI2C1RST)) +#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) +/** + * @} + */ + +/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset + * @brief Force or release APB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST)) +#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable + * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_RNGLPEN)) +#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) +#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) +#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) + +#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_RNGLPEN)) +#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) +#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) +#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) +/** + * @} + */ + +/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable + * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. + * @{ + */ +#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN)) +#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_LPTIM1LPEN)) +#define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_RTCAPBLPEN)) +#define __HAL_RCC_FMPI2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_FMPI2C1LPEN)) +#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN)) + +#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN)) +#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_LPTIM1LPEN)) +#define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_RTCAPBLPEN)) +#define __HAL_RCC_FMPI2C1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_FMPI2C1LPEN)) +#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN)) +/** + * @} + */ + +/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable + * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. + * @{ + */ +#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN)) +#define __HAL_RCC_EXTIT_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_EXTITLPEN)) +#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN)) +#define __HAL_RCC_EXTIT_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_EXTITLPEN)) +/** + * @} + */ + +#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ +/*----------------------------------------------------------------------------*/ + +/*-------------------------------- STM32F411xx -------------------------------*/ +#if defined(STM32F411xE) +/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable + * @brief Enables or disables the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) +#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) +#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN)) +#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET) +#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET) +#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET) +#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) + +#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET) +#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET) +#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET) +#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) +/** + * @} + */ + +/** @defgroup RCCEX_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable + * @brief Enable or disable the AHB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\ + __HAL_RCC_SYSCFG_CLK_ENABLE();\ + }while(0U) + +#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the AHB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET) +#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET) +/** + * @} + */ + +/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable + * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) +#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) +#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) +#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) +#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN)) +/** + * @} + */ + +/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) +#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) +#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) +#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) +#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET) + +#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) +#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) +#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) +#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) +#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET) +/** + * @} + */ + +/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable + * @brief Enable or disable the High Speed APB (APB2) peripheral clock. + * @{ + */ +#define __HAL_RCC_SPI5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN)) +#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN)) +#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) +#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN)) +/** + * @} + */ + +/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET) +#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET) +#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET) +#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET) + +#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET) +#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET) +#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET) +#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET) +/** + * @} + */ + +/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset + * @brief Force or release AHB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST)) +#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST)) +#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) + +#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST)) +#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST)) +#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset + * @brief Force or release AHB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST)) + +#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U) +#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset + * @brief Force or release AHB3 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U) +/** + * @} + */ + +/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset + * @brief Force or release APB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) +#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) +#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) +#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) +#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST)) + +#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) +#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) +#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) +#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) +#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST)) +/** + * @} + */ + +/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset + * @brief Force or release APB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST)) +#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST)) +#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST)) +#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) + +#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST)) +#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST)) +#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) +#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable + * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN)) +#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN)) +#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) +#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) +#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) + +#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN)) +#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN)) +#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) +#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) +#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable + * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN)) +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN)) +/** + * @} + */ + +/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable + * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. + * @{ + */ +#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN)) +#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN)) +#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN)) +#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) +#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN)) + +#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN)) +#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN)) +#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN)) +#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) +#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN)) +/** + * @} + */ + +/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable + * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. + * @{ + */ +#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN)) +#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN)) +#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN)) +#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN)) + +#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN)) +#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN)) +#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN)) +#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN)) +/** + * @} + */ +#endif /* STM32F411xE */ +/*----------------------------------------------------------------------------*/ + +/*---------------------------------- STM32F446xx -----------------------------*/ +#if defined(STM32F446xx) +/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable + * @brief Enables or disables the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) +#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) +#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN)) +#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN)) +#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN)) +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN)) +#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN)) +#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN)) +#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET) +#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET) +#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET) +#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET) +#define __HAL_RCC_USB_OTG_HS_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) != RESET) +#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) != RESET) +#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET) +#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN))!= RESET) +#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) + +#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET) +#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET) +#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET) +#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET) +#define __HAL_RCC_USB_OTG_HS_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) == RESET) +#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) == RESET) +#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET) +#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET) +#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) +/** + * @} + */ + +/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable + * @brief Enable or disable the AHB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_DCMI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN)) +#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\ + __HAL_RCC_SYSCFG_CLK_ENABLE();\ + }while(0U) + +#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN)) + +#define __HAL_RCC_RNG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the AHB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) != RESET) +#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) == RESET) + +#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET) +#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET) + +#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET) +#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET) +/** + * @} + */ + +/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable + * @brief Enables or disables the AHB3 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_FMC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_QSPI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN)) +#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the AHB3 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_FMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) != RESET) +#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET) + +#define __HAL_RCC_FMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) == RESET) +#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET) +/** + * @} + */ + +/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable + * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SPDIFRX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_USART3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_UART4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_UART5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_FMPI2C1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_CAN2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_CEC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_DAC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) +#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) +#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) +#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) +#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN)) +#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) +#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) +#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) +#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) +#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) +#define __HAL_RCC_SPDIFRX_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPDIFRXEN)) +#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) +#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) +#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) +#define __HAL_RCC_FMPI2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_FMPI2C1EN)) +#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN)) +#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN)) +#define __HAL_RCC_CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN)) +#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) +/** + * @} + */ + +/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) +#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) +#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) +#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) +#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET) +#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) +#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET) +#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET) +#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET) +#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET) +#define __HAL_RCC_SPDIFRX_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPDIFRXEN)) != RESET) +#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET) +#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET) +#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET) +#define __HAL_RCC_FMPI2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) != RESET) +#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET) +#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET) +#define __HAL_RCC_CEC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) != RESET) +#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) + +#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) +#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) +#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) +#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) +#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET) +#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) +#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET) +#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET) +#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET) +#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET) +#define __HAL_RCC_SPDIFRX_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPDIFRXEN)) == RESET) +#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET) +#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET) +#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET) +#define __HAL_RCC_FMPI2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) == RESET) +#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET) +#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET) +#define __HAL_RCC_CEC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) == RESET) +#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) +/** + * @} + */ + +/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable + * @brief Enable or disable the High Speed APB (APB2) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_ADC2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_ADC3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SAI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SAI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN)) +#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN)) +#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) +#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN)) +#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN)) +#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN)) +#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN)) +#define __HAL_RCC_SAI2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI2EN)) +/** + * @} + */ + +/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET) +#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET) +#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET) +#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET) +#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET) +#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET) +#define __HAL_RCC_SAI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) != RESET) +#define __HAL_RCC_SAI2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI2EN)) != RESET) + +#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET) +#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET) +#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET) +#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET) +#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET) +#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET) +#define __HAL_RCC_SAI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) == RESET) +#define __HAL_RCC_SAI2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI2EN)) == RESET) +/** + * @} + */ + +/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset + * @brief Force or release AHB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST)) +#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST)) +#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST)) +#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST)) +#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST)) +#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) + +#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST)) +#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST)) +#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST)) +#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST)) +#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST)) +#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset + * @brief Force or release AHB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST)) +#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST)) +#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST)) + +#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U) +#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST)) +#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST)) +#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset + * @brief Force or release AHB3 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U) + +#define __HAL_RCC_FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST)) +#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST)) + +#define __HAL_RCC_FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST)) +#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST)) +/** + * @} + */ + +/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset + * @brief Force or release APB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) +#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) +#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) +#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) +#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) +#define __HAL_RCC_SPDIFRX_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPDIFRXRST)) +#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) +#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) +#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) +#define __HAL_RCC_FMPI2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_FMPI2C1RST)) +#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST)) +#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST)) +#define __HAL_RCC_CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST)) +#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) +#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) +#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) +#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) +#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) +#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST)) + +#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) +#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) +#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) +#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) +#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST)) +#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) +#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) +#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) +#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) +#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) +#define __HAL_RCC_SPDIFRX_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPDIFRXRST)) +#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) +#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) +#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) +#define __HAL_RCC_FMPI2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_FMPI2C1RST)) +#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST)) +#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST)) +#define __HAL_RCC_CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST)) +#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) +/** + * @} + */ + +/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset + * @brief Force or release APB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST)) +#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST)) +#define __HAL_RCC_SAI2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI2RST)) +#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST)) +#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST)) +#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) + +#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST)) +#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST)) +#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) +#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST)) +#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST)) +#define __HAL_RCC_SAI2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI2RST)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable + * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN)) +#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN)) +#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN)) +#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN)) +#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN)) +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN)) +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN)) +#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) +#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) +#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) +#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN)) + +#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN)) +#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN)) +#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN)) +#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN)) +#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN)) +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN)) +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN)) +#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) +#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) +#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) +#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable + * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN)) +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN)) + +#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN)) +#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN)) + +#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN)) +#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable + * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN)) +#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN)) + +#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN)) +#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN)) +/** + * @} + */ + +/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable + * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN)) +#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN)) +#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN)) +#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN)) +#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN)) +#define __HAL_RCC_SPDIFRX_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPDIFRXLPEN)) +#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN)) +#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN)) +#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN)) +#define __HAL_RCC_FMPI2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_FMPI2C1LPEN)) +#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN)) +#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN)) +#define __HAL_RCC_CEC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CECLPEN)) +#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN)) +#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN)) +#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN)) +#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN)) +#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) +#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN)) + +#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN)) +#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN)) +#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN)) +#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) +#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN)) +#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN)) +#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN)) +#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN)) +#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN)) +#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN)) +#define __HAL_RCC_SPDIFRX_CLK_SLEEP_DISABLE()(RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPDIFRXLPEN)) +#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN)) +#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN)) +#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN)) +#define __HAL_RCC_FMPI2C1_CLK_SLEEP_DISABLE()(RCC->APB1LPENR &= ~(RCC_APB1LPENR_FMPI2C1LPEN)) +#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN)) +#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN)) +#define __HAL_RCC_CEC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CECLPEN)) +#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN)) +/** + * @} + */ + +/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable + * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN)) +#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN)) +#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN)) +#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN)) +#define __HAL_RCC_SAI2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI2LPEN)) +#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN)) +#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN)) +#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE()(RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN)) + +#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN)) +#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN)) +#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE()(RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN)) +#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN)) +#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN)) +#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN)) +#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN)) +#define __HAL_RCC_SAI2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI2LPEN)) +/** + * @} + */ + +#endif /* STM32F446xx */ +/*----------------------------------------------------------------------------*/ + +/*-------STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx-------*/ +#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable + * @brief Enables or disables the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ + UNUSED(tmpreg); \ + } while(0U) +#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ +#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ + UNUSED(tmpreg); \ + } while(0U) +#endif /* STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ +#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ + UNUSED(tmpreg); \ + } while(0U) +#endif /* STM32F412Zx || STM32F413xx || STM32F423xx */ +#define __HAL_RCC_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ + UNUSED(tmpreg); \ + } while(0U) +#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) +#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ +#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) +#endif /* STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ +#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN)) +#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN)) +#endif /* STM32F412Zx || STM32F413xx || STM32F423xx */ +#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET) +#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ +#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET) +#endif /* STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ +#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET) +#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET) +#endif /* STM32F412Zx || STM32F413xx || STM32F423xx */ +#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET) + +#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET) +#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ +#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET) +#endif /* STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ +#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET) +#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET) +#endif /* STM32F412Zx || STM32F413xx || STM32F423xx */ +#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET) +/** + * @} + */ + +/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable + * @brief Enable or disable the AHB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#if defined(STM32F423xx) +#define __HAL_RCC_AES_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_AES_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_AESEN)) +#endif /* STM32F423xx */ + +#define __HAL_RCC_RNG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN)) + +#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\ + __HAL_RCC_SYSCFG_CLK_ENABLE();\ + }while(0U) + +#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the AHB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#if defined(STM32F423xx) +#define __HAL_RCC_AES_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_AESEN)) != RESET) +#define __HAL_RCC_AES_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_AESEN)) == RESET) +#endif /* STM32F423xx */ + +#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET) +#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET) + +#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET) +#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET) +/** + * @} + */ + +/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable + * @brief Enables or disables the AHB3 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_FSMC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_QSPI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_FSMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FSMCEN)) +#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN)) +#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */ +/** + * @} + */ + +/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the AHB3 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_FSMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) != RESET) +#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET) + +#define __HAL_RCC_FSMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) == RESET) +#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET) +#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */ + +/** + * @} + */ + +/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable + * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ + UNUSED(tmpreg); \ + } while(0U) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_LPTIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_RTCAPB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_USART3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ + UNUSED(tmpreg); \ + } while(0U) + +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_UART4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_UART5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ + UNUSED(tmpreg); \ + } while(0U) +#endif /* STM32F413xx || STM32F423xx */ + +#define __HAL_RCC_FMPI2C1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_CAN2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ + UNUSED(tmpreg); \ + } while(0U) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_CAN3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ + UNUSED(tmpreg); \ + } while(0U) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_DAC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_UART7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_UART8_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\ + UNUSED(tmpreg); \ + } while(0U) +#endif /* STM32F413xx || STM32F423xx */ + +#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) +#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) +#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) +#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) +#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) +#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) +#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) +#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_LPTIM1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_LPTIM1EN)) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_RTCAPB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_RTCAPBEN)) +#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) +#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) +#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN)) +#define __HAL_RCC_FMPI2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_FMPI2C1EN)) +#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN)) +#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_CAN3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN3EN)) +#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) +#define __HAL_RCC_UART7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART7EN)) +#define __HAL_RCC_UART8_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART8EN)) +#endif /* STM32F413xx || STM32F423xx */ + +/** + * @} + */ + +/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) +#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) +#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) +#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) +#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET) +#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET) +#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET) +#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) != RESET) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) != RESET) +#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) +#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET) +#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET) +#define __HAL_RCC_FMPI2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) != RESET) +#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN))!= RESET) +#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_CAN3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN3EN)) != RESET) +#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) +#define __HAL_RCC_UART7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) != RESET) +#define __HAL_RCC_UART8_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) != RESET) +#endif /* STM32F413xx || STM32F423xx */ + +#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) +#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) +#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) +#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) +#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET) +#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET) +#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET) +#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) == RESET) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_RTCAPB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) == RESET) +#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) +#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET) +#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET) +#define __HAL_RCC_FMPI2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) == RESET) +#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET) +#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_CAN3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN3EN)) == RESET) +#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) +#define __HAL_RCC_UART7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) == RESET) +#define __HAL_RCC_UART8_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) == RESET) +#endif /* STM32F413xx || STM32F423xx */ +/** + * @} + */ +/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable + * @brief Enable or disable the High Speed APB (APB2) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ + UNUSED(tmpreg); \ + } while(0U) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_UART9_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_UART9EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_UART9EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_UART10_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_UART10EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_UART10EN);\ + UNUSED(tmpreg); \ + } while(0U) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_EXTIT_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ + UNUSED(tmpreg); \ + } while(0U) +#define __HAL_RCC_SPI5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ + UNUSED(tmpreg); \ + } while(0U) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_SAI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_DFSDM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN);\ + UNUSED(tmpreg); \ + } while(0U) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_DFSDM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM2EN);\ + UNUSED(tmpreg); \ + } while(0U) +#endif /* STM32F413xx || STM32F423xx */ + +#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_UART9_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_UART9EN)) +#define __HAL_RCC_UART10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_UART10EN)) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN)) +#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN)) +#define __HAL_RCC_EXTIT_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_EXTITEN)) +#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) +#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN)) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_DFSDM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DFSDM1EN)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_DFSDM2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DFSDM2EN)) +#endif /* STM32F413xx || STM32F423xx */ +/** + * @} + */ + +/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status + * @brief Get the enable or disable status of the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_UART9_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_UART9EN)) != RESET) +#define __HAL_RCC_UART10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_UART10EN)) != RESET) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET) +#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET) +#define __HAL_RCC_EXTIT_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) != RESET) +#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET) +#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_SAI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) != RESET) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_DFSDM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM1EN)) != RESET) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_DFSDM2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM2EN)) != RESET) +#endif /* STM32F413xx || STM32F423xx */ + +#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_UART9_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_UART9EN)) == RESET) +#define __HAL_RCC_UART10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_UART10EN)) == RESET) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET) +#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET) +#define __HAL_RCC_EXTIT_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) == RESET) +#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET) +#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_SAI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) == RESET) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_DFSDM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM1EN)) == RESET) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_DFSDM2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM2EN)) == RESET) +#endif /* STM32F413xx || STM32F423xx */ +/** + * @} + */ + +/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset + * @brief Force or release AHB1 peripheral reset. + * @{ + */ +#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST)) +#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ +#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST)) +#endif /* STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ +#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST)) +#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST)) +#endif /* STM32F412Zx || STM32F413xx || STM32F423xx */ +#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) + +#if defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST)) +#endif /* STM32F412Rx || STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ +#if defined(STM32F412Vx) || defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST)) +#endif /* STM32F412Vx || STM32F412Zx || STM32F413xx || STM32F423xx */ +#if defined(STM32F412Zx) || defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST)) +#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST)) +#endif /* STM32F412Zx || STM32F413xx || STM32F423xx */ +#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset + * @brief Force or release AHB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U) + +#if defined(STM32F423xx) +#define __HAL_RCC_AES_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_AESRST)) +#define __HAL_RCC_AES_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_AESRST)) +#endif /* STM32F423xx */ + +#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST)) +#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST)) + +#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST)) +#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset + * @brief Force or release AHB3 peripheral reset. + * @{ + */ +#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU) +#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U) + +#define __HAL_RCC_FSMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FSMCRST)) +#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST)) + +#define __HAL_RCC_FSMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FSMCRST)) +#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST)) +#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */ +#if defined(STM32F412Cx) +#define __HAL_RCC_AHB3_FORCE_RESET() +#define __HAL_RCC_AHB3_RELEASE_RESET() + +#define __HAL_RCC_FSMC_FORCE_RESET() +#define __HAL_RCC_QSPI_FORCE_RESET() + +#define __HAL_RCC_FSMC_RELEASE_RESET() +#define __HAL_RCC_QSPI_RELEASE_RESET() +#endif /* STM32F412Cx */ +/** + * @} + */ + +/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset + * @brief Force or release APB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) +#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) +#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) +#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) +#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) +#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) +#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) +#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_LPTIM1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_LPTIM1RST)) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) +#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) +#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST)) +#define __HAL_RCC_FMPI2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_FMPI2C1RST)) +#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST)) +#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_CAN3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN3RST)) +#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) +#define __HAL_RCC_UART7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART7RST)) +#define __HAL_RCC_UART8_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART8RST)) +#endif /* STM32F413xx || STM32F423xx */ + +#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) +#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) +#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) +#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) +#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) +#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) +#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) +#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_LPTIM1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_LPTIM1RST)) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) +#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) +#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST)) +#define __HAL_RCC_FMPI2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_FMPI2C1RST)) +#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST)) +#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_CAN3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN3RST)) +#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) +#define __HAL_RCC_UART7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART7RST)) +#define __HAL_RCC_UART8_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART8RST)) +#endif /* STM32F413xx || STM32F423xx */ +/** + * @} + */ + +/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset + * @brief Force or release APB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_UART9_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_UART9RST)) +#define __HAL_RCC_UART10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_UART10RST)) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST)) +#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST)) +#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) +#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST)) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_DFSDM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DFSDM1RST)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_DFSDM2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DFSDM2RST)) +#endif /* STM32F413xx || STM32F423xx */ + +#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_UART9_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_UART9RST)) +#define __HAL_RCC_UART10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_UART10RST)) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST)) +#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST)) +#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) +#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST)) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_DFSDM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DFSDM1RST)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_DFSDM2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DFSDM2RST)) +#endif /* STM32F413xx || STM32F423xx */ +/** + * @} + */ + +/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable + * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN)) +#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN)) +#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN)) +#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN)) +#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) +#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) +#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN)) +#endif /* STM32F413xx || STM32F423xx */ + +#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN)) +#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN)) +#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN)) +#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN)) +#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) +#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) +#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN)) +#endif /* STM32F413xx || STM32F423xx */ +/** + * @} + */ + +/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable + * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#if defined(STM32F423xx) +#define __HAL_RCC_AES_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_AESLPEN)) +#define __HAL_RCC_AES_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_AESLPEN)) +#endif /* STM32F423xx */ + +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN)) +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN)) + +#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN)) +#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN)) +/** + * @} + */ + +/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable + * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_FSMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FSMCLPEN)) +#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN)) + +#define __HAL_RCC_FSMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FSMCLPEN)) +#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN)) +#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx || STM32F423xx */ + +/** + * @} + */ + +/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable + * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN)) +#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN)) +#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN)) +#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN)) +#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN)) +#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN)) +#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN)) +#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_LPTIM1LPEN)) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_RTCAPBLPEN)) +#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) +#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN)) +#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN)) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN)) +#define __HAL_RCC_FMPI2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_FMPI2C1LPEN)) +#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN)) +#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_CAN3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN3LPEN)) +#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN)) +#define __HAL_RCC_UART7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART7LPEN)) +#define __HAL_RCC_UART8_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART8LPEN)) +#endif /* STM32F413xx || STM32F423xx */ + +#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN)) +#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN)) +#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN)) +#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN)) +#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN)) +#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN)) +#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN)) +#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_LPTIM1LPEN)) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_RTCAPBLPEN)) +#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) +#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN)) +#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN)) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN)) +#define __HAL_RCC_FMPI2C1_CLK_SLEEP_DISABLE()(RCC->APB1LPENR &= ~(RCC_APB1LPENR_FMPI2C1LPEN)) +#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN)) +#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_CAN3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN3LPEN)) +#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN)) +#define __HAL_RCC_UART7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART7LPEN)) +#define __HAL_RCC_UART8_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART8LPEN)) +#endif /* STM32F413xx || STM32F423xx */ +/** + * @} + */ + +/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable + * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_UART9_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_UART9LPEN)) +#define __HAL_RCC_UART10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_UART10LPEN)) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN)) +#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN)) +#define __HAL_RCC_EXTIT_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_EXTITLPEN)) +#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN)) +#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN)) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_DFSDM1LPEN)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_DFSDM2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_DFSDM2LPEN)) +#endif /* STM32F413xx || STM32F423xx */ + +#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_UART9_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_UART9LPEN)) +#define __HAL_RCC_UART10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_UART10LPEN)) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN)) +#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN)) +#define __HAL_RCC_EXTIT_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_EXTITLPEN)) +#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN)) +#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN)) +#endif /* STM32F413xx || STM32F423xx */ +#define __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_DFSDM1LPEN)) +#if defined(STM32F413xx) || defined(STM32F423xx) +#define __HAL_RCC_DFSDM2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_DFSDM2LPEN)) +#endif /* STM32F413xx || STM32F423xx */ +/** + * @} + */ +#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ +/*----------------------------------------------------------------------------*/ + +/*------------------------------- PLL Configuration --------------------------*/ +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) ||\ + defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ + defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +/** @brief Macro to configure the main PLL clock source, multiplication and division factors. + * @note This function must be used only when the main PLL is disabled. + * @param __RCC_PLLSource__ specifies the PLL entry clock source. + * This parameter can be one of the following values: + * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry + * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry + * @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S. + * @param __PLLM__ specifies the division factor for PLL VCO input clock + * This parameter must be a number between Min_Data = 2 and Max_Data = 63. + * @note You have to set the PLLM parameter correctly to ensure that the VCO input + * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency + * of 2 MHz to limit PLL jitter. + * @param __PLLN__ specifies the multiplication factor for PLL VCO output clock + * This parameter must be a number between Min_Data = 50 and Max_Data = 432. + * @note You have to set the PLLN parameter correctly to ensure that the VCO + * output frequency is between 100 and 432 MHz. + * + * @param __PLLP__ specifies the division factor for main system clock (SYSCLK) + * This parameter must be a number in the range {2, 4, 6, or 8}. + * + * @param __PLLQ__ specifies the division factor for OTG FS, SDIO and RNG clocks + * This parameter must be a number between Min_Data = 2 and Max_Data = 15. + * @note If the USB OTG FS is used in your application, you have to set the + * PLLQ parameter correctly to have 48 MHz clock for the USB. However, + * the SDIO and RNG need a frequency lower than or equal to 48 MHz to work + * correctly. + * + * @param __PLLR__ PLL division factor for I2S, SAI, SYSTEM, SPDIFRX clocks. + * This parameter must be a number between Min_Data = 2 and Max_Data = 7. + * @note This parameter is only available in STM32F446xx/STM32F469xx/STM32F479xx/ + STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx/STM32F413xx/STM32F423xx devices. + * + */ +#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__,__PLLR__) \ + (RCC->PLLCFGR = ((__RCC_PLLSource__) | (__PLLM__) | \ + ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \ + ((((__PLLP__) >> 1U) -1U) << RCC_PLLCFGR_PLLP_Pos) | \ + ((__PLLQ__) << RCC_PLLCFGR_PLLQ_Pos) | \ + ((__PLLR__) << RCC_PLLCFGR_PLLR_Pos))) +#else +/** @brief Macro to configure the main PLL clock source, multiplication and division factors. + * @note This function must be used only when the main PLL is disabled. + * @param __RCC_PLLSource__ specifies the PLL entry clock source. + * This parameter can be one of the following values: + * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry + * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry + * @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S. + * @param __PLLM__ specifies the division factor for PLL VCO input clock + * This parameter must be a number between Min_Data = 2 and Max_Data = 63. + * @note You have to set the PLLM parameter correctly to ensure that the VCO input + * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency + * of 2 MHz to limit PLL jitter. + * @param __PLLN__ specifies the multiplication factor for PLL VCO output clock + * This parameter must be a number between Min_Data = 50 and Max_Data = 432 + * Except for STM32F411xE devices where Min_Data = 192. + * @note You have to set the PLLN parameter correctly to ensure that the VCO + * output frequency is between 100 and 432 MHz, Except for STM32F411xE devices + * where frequency is between 192 and 432 MHz. + * @param __PLLP__ specifies the division factor for main system clock (SYSCLK) + * This parameter must be a number in the range {2, 4, 6, or 8}. + * + * @param __PLLQ__ specifies the division factor for OTG FS, SDIO and RNG clocks + * This parameter must be a number between Min_Data = 2 and Max_Data = 15. + * @note If the USB OTG FS is used in your application, you have to set the + * PLLQ parameter correctly to have 48 MHz clock for the USB. However, + * the SDIO and RNG need a frequency lower than or equal to 48 MHz to work + * correctly. + * + */ +#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__) \ + (RCC->PLLCFGR = (0x20000000U | (__RCC_PLLSource__) | (__PLLM__)| \ + ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \ + ((((__PLLP__) >> 1U) -1U) << RCC_PLLCFGR_PLLP_Pos) | \ + ((__PLLQ__) << RCC_PLLCFGR_PLLQ_Pos))) + #endif /* STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ +/*----------------------------------------------------------------------------*/ + +/*----------------------------PLLI2S Configuration ---------------------------*/ +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ + defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ + defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ + defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ + defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) + +/** @brief Macros to enable or disable the PLLI2S. + * @note The PLLI2S is disabled by hardware when entering STOP and STANDBY modes. + */ +#define __HAL_RCC_PLLI2S_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = ENABLE) +#define __HAL_RCC_PLLI2S_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = DISABLE) + +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || + STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || + STM32F412Rx || STM32F412Cx */ +#if defined(STM32F446xx) +/** @brief Macro to configure the PLLI2S clock multiplication and division factors . + * @note This macro must be used only when the PLLI2S is disabled. + * @note PLLI2S clock source is common with the main PLL (configured in + * HAL_RCC_ClockConfig() API). + * @param __PLLI2SM__ specifies the division factor for PLLI2S VCO input clock + * This parameter must be a number between Min_Data = 2 and Max_Data = 63. + * @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input + * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency + * of 1 MHz to limit PLLI2S jitter. + * + * @param __PLLI2SN__ specifies the multiplication factor for PLLI2S VCO output clock + * This parameter must be a number between Min_Data = 50 and Max_Data = 432. + * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO + * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. + * + * @param __PLLI2SP__ specifies division factor for SPDIFRX Clock. + * This parameter must be a number in the range {2, 4, 6, or 8}. + * @note the PLLI2SP parameter is only available with STM32F446xx Devices + * + * @param __PLLI2SR__ specifies the division factor for I2S clock + * This parameter must be a number between Min_Data = 2 and Max_Data = 7. + * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz + * on the I2S clock frequency. + * + * @param __PLLI2SQ__ specifies the division factor for SAI clock + * This parameter must be a number between Min_Data = 2 and Max_Data = 15. + */ +#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SP__, __PLLI2SQ__, __PLLI2SR__) \ + (RCC->PLLI2SCFGR = ((__PLLI2SM__) |\ + ((__PLLI2SN__) << RCC_PLLI2SCFGR_PLLI2SN_Pos) |\ + ((((__PLLI2SP__) >> 1U) -1U) << RCC_PLLI2SCFGR_PLLI2SP_Pos) |\ + ((__PLLI2SQ__) << RCC_PLLI2SCFGR_PLLI2SQ_Pos) |\ + ((__PLLI2SR__) << RCC_PLLI2SCFGR_PLLI2SR_Pos))) +#elif defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ + defined(STM32F413xx) || defined(STM32F423xx) +/** @brief Macro to configure the PLLI2S clock multiplication and division factors . + * @note This macro must be used only when the PLLI2S is disabled. + * @note PLLI2S clock source is common with the main PLL (configured in + * HAL_RCC_ClockConfig() API). + * @param __PLLI2SM__ specifies the division factor for PLLI2S VCO input clock + * This parameter must be a number between Min_Data = 2 and Max_Data = 63. + * @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input + * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency + * of 1 MHz to limit PLLI2S jitter. + * + * @param __PLLI2SN__ specifies the multiplication factor for PLLI2S VCO output clock + * This parameter must be a number between Min_Data = 50 and Max_Data = 432. + * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO + * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. + * + * @param __PLLI2SR__ specifies the division factor for I2S clock + * This parameter must be a number between Min_Data = 2 and Max_Data = 7. + * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz + * on the I2S clock frequency. + * + * @param __PLLI2SQ__ specifies the division factor for SAI clock + * This parameter must be a number between Min_Data = 2 and Max_Data = 15. + */ +#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SQ__, __PLLI2SR__) \ + (RCC->PLLI2SCFGR = ((__PLLI2SM__) |\ + ((__PLLI2SN__) << RCC_PLLI2SCFGR_PLLI2SN_Pos) |\ + ((__PLLI2SQ__) << RCC_PLLI2SCFGR_PLLI2SQ_Pos) |\ + ((__PLLI2SR__) << RCC_PLLI2SCFGR_PLLI2SR_Pos))) +#else +/** @brief Macro to configure the PLLI2S clock multiplication and division factors . + * @note This macro must be used only when the PLLI2S is disabled. + * @note PLLI2S clock source is common with the main PLL (configured in + * HAL_RCC_ClockConfig() API). + * @param __PLLI2SN__ specifies the multiplication factor for PLLI2S VCO output clock + * This parameter must be a number between Min_Data = 50 and Max_Data = 432. + * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO + * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. + * + * @param __PLLI2SR__ specifies the division factor for I2S clock + * This parameter must be a number between Min_Data = 2 and Max_Data = 7. + * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz + * on the I2S clock frequency. + * + */ +#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SN__, __PLLI2SR__) \ + (RCC->PLLI2SCFGR = (((__PLLI2SN__) << RCC_PLLI2SCFGR_PLLI2SN_Pos) |\ + ((__PLLI2SR__) << RCC_PLLI2SCFGR_PLLI2SR_Pos))) +#endif /* STM32F446xx */ + +#if defined(STM32F411xE) +/** @brief Macro to configure the PLLI2S clock multiplication and division factors . + * @note This macro must be used only when the PLLI2S is disabled. + * @note This macro must be used only when the PLLI2S is disabled. + * @note PLLI2S clock source is common with the main PLL (configured in + * HAL_RCC_ClockConfig() API). + * @param __PLLI2SM__ specifies the division factor for PLLI2S VCO input clock + * This parameter must be a number between Min_Data = 2 and Max_Data = 63. + * @note The PLLI2SM parameter is only used with STM32F411xE/STM32F410xx Devices + * @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input + * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency + * of 2 MHz to limit PLLI2S jitter. + * @param __PLLI2SN__ specifies the multiplication factor for PLLI2S VCO output clock + * This parameter must be a number between Min_Data = 192 and Max_Data = 432. + * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO + * output frequency is between Min_Data = 192 and Max_Data = 432 MHz. + * @param __PLLI2SR__ specifies the division factor for I2S clock + * This parameter must be a number between Min_Data = 2 and Max_Data = 7. + * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz + * on the I2S clock frequency. + */ +#define __HAL_RCC_PLLI2S_I2SCLK_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SM__) |\ + ((__PLLI2SN__) << RCC_PLLI2SCFGR_PLLI2SN_Pos) |\ + ((__PLLI2SR__) << RCC_PLLI2SCFGR_PLLI2SR_Pos))) +#endif /* STM32F411xE */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) +/** @brief Macro used by the SAI HAL driver to configure the PLLI2S clock multiplication and division factors. + * @note This macro must be used only when the PLLI2S is disabled. + * @note PLLI2S clock source is common with the main PLL (configured in + * HAL_RCC_ClockConfig() API) + * @param __PLLI2SN__ specifies the multiplication factor for PLLI2S VCO output clock. + * This parameter must be a number between Min_Data = 50 and Max_Data = 432. + * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO + * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. + * @param __PLLI2SQ__ specifies the division factor for SAI1 clock. + * This parameter must be a number between Min_Data = 2 and Max_Data = 15. + * @note the PLLI2SQ parameter is only available with STM32F427xx/437xx/429xx/439xx/469xx/479xx + * Devices and can be configured using the __HAL_RCC_PLLI2S_PLLSAICLK_CONFIG() macro + * @param __PLLI2SR__ specifies the division factor for I2S clock + * This parameter must be a number between Min_Data = 2 and Max_Data = 7. + * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz + * on the I2S clock frequency. + */ +#define __HAL_RCC_PLLI2S_SAICLK_CONFIG(__PLLI2SN__, __PLLI2SQ__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SN__) << 6U) |\ + ((__PLLI2SQ__) << 24U) |\ + ((__PLLI2SR__) << 28U)) +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ +/*----------------------------------------------------------------------------*/ + +/*------------------------------ PLLSAI Configuration ------------------------*/ +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) +/** @brief Macros to Enable or Disable the PLLISAI. + * @note The PLLSAI is only available with STM32F429x/439x Devices. + * @note The PLLSAI is disabled by hardware when entering STOP and STANDBY modes. + */ +#define __HAL_RCC_PLLSAI_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLSAION_BB = ENABLE) +#define __HAL_RCC_PLLSAI_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLSAION_BB = DISABLE) + +#if defined(STM32F446xx) +/** @brief Macro to configure the PLLSAI clock multiplication and division factors. + * + * @param __PLLSAIM__ specifies the division factor for PLLSAI VCO input clock + * This parameter must be a number between Min_Data = 2 and Max_Data = 63. + * @note You have to set the PLLSAIM parameter correctly to ensure that the VCO input + * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency + * of 1 MHz to limit PLLI2S jitter. + * @note The PLLSAIM parameter is only used with STM32F446xx Devices + * + * @param __PLLSAIN__ specifies the multiplication factor for PLLSAI VCO output clock. + * This parameter must be a number between Min_Data = 50 and Max_Data = 432. + * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO + * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. + * + * @param __PLLSAIP__ specifies division factor for OTG FS, SDIO and RNG clocks. + * This parameter must be a number in the range {2, 4, 6, or 8}. + * @note the PLLSAIP parameter is only available with STM32F446xx Devices + * + * @param __PLLSAIQ__ specifies the division factor for SAI clock + * This parameter must be a number between Min_Data = 2 and Max_Data = 15. + * + * @param __PLLSAIR__ specifies the division factor for LTDC clock + * This parameter must be a number between Min_Data = 2 and Max_Data = 7. + * @note the PLLI2SR parameter is only available with STM32F427/437/429/439xx Devices + */ +#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIM__, __PLLSAIN__, __PLLSAIP__, __PLLSAIQ__, __PLLSAIR__) \ + (RCC->PLLSAICFGR = ((__PLLSAIM__) | \ + ((__PLLSAIN__) << RCC_PLLSAICFGR_PLLSAIN_Pos) | \ + ((((__PLLSAIP__) >> 1U) -1U) << RCC_PLLSAICFGR_PLLSAIP_Pos) | \ + ((__PLLSAIQ__) << RCC_PLLSAICFGR_PLLSAIQ_Pos))) +#endif /* STM32F446xx */ + +#if defined(STM32F469xx) || defined(STM32F479xx) +/** @brief Macro to configure the PLLSAI clock multiplication and division factors. + * + * @param __PLLSAIN__ specifies the multiplication factor for PLLSAI VCO output clock. + * This parameter must be a number between Min_Data = 50 and Max_Data = 432. + * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO + * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. + * + * @param __PLLSAIP__ specifies division factor for SDIO and CLK48 clocks. + * This parameter must be a number in the range {2, 4, 6, or 8}. + * + * @param __PLLSAIQ__ specifies the division factor for SAI clock + * This parameter must be a number between Min_Data = 2 and Max_Data = 15. + * + * @param __PLLSAIR__ specifies the division factor for LTDC clock + * This parameter must be a number between Min_Data = 2 and Max_Data = 7. + */ +#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIP__, __PLLSAIQ__, __PLLSAIR__) \ + (RCC->PLLSAICFGR = (((__PLLSAIN__) << RCC_PLLSAICFGR_PLLSAIN_Pos) |\ + ((((__PLLSAIP__) >> 1U) -1U) << RCC_PLLSAICFGR_PLLSAIP_Pos) |\ + ((__PLLSAIQ__) << RCC_PLLSAICFGR_PLLSAIQ_Pos) |\ + ((__PLLSAIR__) << RCC_PLLSAICFGR_PLLSAIR_Pos))) +#endif /* STM32F469xx || STM32F479xx */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) +/** @brief Macro to configure the PLLSAI clock multiplication and division factors. + * + * @param __PLLSAIN__ specifies the multiplication factor for PLLSAI VCO output clock. + * This parameter must be a number between Min_Data = 50 and Max_Data = 432. + * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO + * output frequency is between Min_Data = 100 and Max_Data = 432 MHz. + * + * @param __PLLSAIQ__ specifies the division factor for SAI clock + * This parameter must be a number between Min_Data = 2 and Max_Data = 15. + * + * @param __PLLSAIR__ specifies the division factor for LTDC clock + * This parameter must be a number between Min_Data = 2 and Max_Data = 7. + * @note the PLLI2SR parameter is only available with STM32F427/437/429/439xx Devices + */ +#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIQ__, __PLLSAIR__) \ + (RCC->PLLSAICFGR = (((__PLLSAIN__) << RCC_PLLSAICFGR_PLLSAIN_Pos) | \ + ((__PLLSAIQ__) << RCC_PLLSAICFGR_PLLSAIQ_Pos) | \ + ((__PLLSAIR__) << RCC_PLLSAICFGR_PLLSAIR_Pos))) +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ + +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ +/*----------------------------------------------------------------------------*/ + +/*------------------- PLLSAI/PLLI2S Dividers Configuration -------------------*/ +#if defined(STM32F413xx) || defined(STM32F423xx) +/** @brief Macro to configure the SAI clock Divider coming from PLLI2S. + * @note This function must be called before enabling the PLLI2S. + * @param __PLLI2SDivR__ specifies the PLLI2S division factor for SAI1 clock. + * This parameter must be a number between 1 and 32. + * SAI1 clock frequency = f(PLLI2SR) / __PLLI2SDivR__ + */ +#define __HAL_RCC_PLLI2S_PLLSAICLKDIVR_CONFIG(__PLLI2SDivR__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVR, (__PLLI2SDivR__)-1U)) + +/** @brief Macro to configure the SAI clock Divider coming from PLL. + * @param __PLLDivR__ specifies the PLL division factor for SAI1 clock. + * This parameter must be a number between 1 and 32. + * SAI1 clock frequency = f(PLLR) / __PLLDivR__ + */ +#define __HAL_RCC_PLL_PLLSAICLKDIVR_CONFIG(__PLLDivR__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLDIVR, ((__PLLDivR__)-1U)<<8U)) +#endif /* STM32F413xx || STM32F423xx */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) ||\ + defined(STM32F469xx) || defined(STM32F479xx) +/** @brief Macro to configure the SAI clock Divider coming from PLLI2S. + * @note This function must be called before enabling the PLLI2S. + * @param __PLLI2SDivQ__ specifies the PLLI2S division factor for SAI1 clock. + * This parameter must be a number between 1 and 32. + * SAI1 clock frequency = f(PLLI2SQ) / __PLLI2SDivQ__ + */ +#define __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(__PLLI2SDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVQ, (__PLLI2SDivQ__)-1U)) + +/** @brief Macro to configure the SAI clock Divider coming from PLLSAI. + * @note This function must be called before enabling the PLLSAI. + * @param __PLLSAIDivQ__ specifies the PLLSAI division factor for SAI1 clock . + * This parameter must be a number between Min_Data = 1 and Max_Data = 32. + * SAI1 clock frequency = f(PLLSAIQ) / __PLLSAIDivQ__ + */ +#define __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(__PLLSAIDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVQ, ((__PLLSAIDivQ__)-1U)<<8U)) +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) +/** @brief Macro to configure the LTDC clock Divider coming from PLLSAI. + * + * @note The LTDC peripheral is only available with STM32F427/437/429/439/469/479xx Devices. + * @note This function must be called before enabling the PLLSAI. + * @param __PLLSAIDivR__ specifies the PLLSAI division factor for LTDC clock . + * This parameter must be a number between Min_Data = 2 and Max_Data = 16. + * LTDC clock frequency = f(PLLSAIR) / __PLLSAIDivR__ + */ +#define __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(__PLLSAIDivR__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVR, (__PLLSAIDivR__))) +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ +/*----------------------------------------------------------------------------*/ + +/*------------------------- Peripheral Clock selection -----------------------*/ +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ + defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ + defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F469xx) ||\ + defined(STM32F479xx) +/** @brief Macro to configure the I2S clock source (I2SCLK). + * @note This function must be called before enabling the I2S APB clock. + * @param __SOURCE__ specifies the I2S clock source. + * This parameter can be one of the following values: + * @arg RCC_I2SCLKSOURCE_PLLI2S: PLLI2S clock used as I2S clock source. + * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin + * used as I2S clock source. + */ +#define __HAL_RCC_I2S_CONFIG(__SOURCE__) (*(__IO uint32_t *) RCC_CFGR_I2SSRC_BB = (__SOURCE__)) + + +/** @brief Macro to get the I2S clock source (I2SCLK). + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2SCLKSOURCE_PLLI2S: PLLI2S clock used as I2S clock source. + * @arg @ref RCC_I2SCLKSOURCE_EXT External clock mapped on the I2S_CKIN pin + * used as I2S clock source + */ +#define __HAL_RCC_GET_I2S_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_I2SSRC))) +#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) + +/** @brief Macro to configure SAI1BlockA clock source selection. + * @note The SAI peripheral is only available with STM32F427/437/429/439/469/479xx Devices. + * @note This function must be called before enabling PLLSAI, PLLI2S and + * the SAI clock. + * @param __SOURCE__ specifies the SAI Block A clock source. + * This parameter can be one of the following values: + * @arg RCC_SAIACLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used + * as SAI1 Block A clock. + * @arg RCC_SAIACLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used + * as SAI1 Block A clock. + * @arg RCC_SAIACLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin + * used as SAI1 Block A clock. + */ +#define __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1ASRC, (__SOURCE__))) + +/** @brief Macro to configure SAI1BlockB clock source selection. + * @note The SAI peripheral is only available with STM32F427/437/429/439/469/479xx Devices. + * @note This function must be called before enabling PLLSAI, PLLI2S and + * the SAI clock. + * @param __SOURCE__ specifies the SAI Block B clock source. + * This parameter can be one of the following values: + * @arg RCC_SAIBCLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used + * as SAI1 Block B clock. + * @arg RCC_SAIBCLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used + * as SAI1 Block B clock. + * @arg RCC_SAIBCLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin + * used as SAI1 Block B clock. + */ +#define __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1BSRC, (__SOURCE__))) +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ + +#if defined(STM32F446xx) +/** @brief Macro to configure SAI1 clock source selection. + * @note This configuration is only available with STM32F446xx Devices. + * @note This function must be called before enabling PLL, PLLSAI, PLLI2S and + * the SAI clock. + * @param __SOURCE__ specifies the SAI1 clock source. + * This parameter can be one of the following values: + * @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI1 clock. + * @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI1 clock. + * @arg RCC_SAI1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock. + * @arg RCC_SAI1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock. + */ +#define __HAL_RCC_SAI1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1SRC, (__SOURCE__))) + +/** @brief Macro to Get SAI1 clock source selection. + * @note This configuration is only available with STM32F446xx Devices. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI1 clock. + * @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI1 clock. + * @arg RCC_SAI1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock. + * @arg RCC_SAI1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock. + */ +#define __HAL_RCC_GET_SAI1_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI1SRC)) + +/** @brief Macro to configure SAI2 clock source selection. + * @note This configuration is only available with STM32F446xx Devices. + * @note This function must be called before enabling PLL, PLLSAI, PLLI2S and + * the SAI clock. + * @param __SOURCE__ specifies the SAI2 clock source. + * This parameter can be one of the following values: + * @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI2 clock. + * @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI2 clock. + * @arg RCC_SAI2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI2 clock. + * @arg RCC_SAI2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock used as SAI2 clock. + */ +#define __HAL_RCC_SAI2_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI2SRC, (__SOURCE__))) + +/** @brief Macro to Get SAI2 clock source selection. + * @note This configuration is only available with STM32F446xx Devices. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI2 clock. + * @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI2 clock. + * @arg RCC_SAI2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI2 clock. + * @arg RCC_SAI2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock used as SAI2 clock. + */ +#define __HAL_RCC_GET_SAI2_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI2SRC)) + +/** @brief Macro to configure I2S APB1 clock source selection. + * @note This function must be called before enabling PLL, PLLI2S and the I2S clock. + * @param __SOURCE__ specifies the I2S APB1 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock. + * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as I2S APB1 clock. + * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as I2S APB1 clock. + * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. + */ +#define __HAL_RCC_I2S_APB1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC, (__SOURCE__))) + +/** @brief Macro to Get I2S APB1 clock source selection. + * @retval The clock source can be one of the following values: + * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock. + * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as I2S APB1 clock. + * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as I2S APB1 clock. + * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. + */ +#define __HAL_RCC_GET_I2S_APB1_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC)) + +/** @brief Macro to configure I2S APB2 clock source selection. + * @note This function must be called before enabling PLL, PLLI2S and the I2S clock. + * @param __SOURCE__ specifies the SAI Block A clock source. + * This parameter can be one of the following values: + * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock. + * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as I2S APB2 clock. + * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as I2S APB2 clock. + * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. + */ +#define __HAL_RCC_I2S_APB2_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC, (__SOURCE__))) + +/** @brief Macro to Get I2S APB2 clock source selection. + * @retval The clock source can be one of the following values: + * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock. + * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as I2S APB2 clock. + * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as I2S APB2 clock. + * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. + */ +#define __HAL_RCC_GET_I2S_APB2_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC)) + +/** @brief Macro to configure the CEC clock. + * @param __SOURCE__ specifies the CEC clock source. + * This parameter can be one of the following values: + * @arg RCC_CECCLKSOURCE_HSI: HSI selected as CEC clock + * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock + */ +#define __HAL_RCC_CEC_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL, (uint32_t)(__SOURCE__))) + +/** @brief Macro to Get the CEC clock. + * @retval The clock source can be one of the following values: + * @arg RCC_CECCLKSOURCE_HSI488: HSI selected as CEC clock + * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock + */ +#define __HAL_RCC_GET_CEC_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL)) + +/** @brief Macro to configure the FMPI2C1 clock. + * @param __SOURCE__ specifies the FMPI2C1 clock source. + * This parameter can be one of the following values: + * @arg RCC_FMPI2C1CLKSOURCE_PCLK1: PCLK1 selected as FMPI2C1 clock + * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock + * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock + */ +#define __HAL_RCC_FMPI2C1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, (uint32_t)(__SOURCE__))) + +/** @brief Macro to Get the FMPI2C1 clock. + * @retval The clock source can be one of the following values: + * @arg RCC_FMPI2C1CLKSOURCE_PCLK1: PCLK1 selected as FMPI2C1 clock + * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock + * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock + */ +#define __HAL_RCC_GET_FMPI2C1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL)) + +/** @brief Macro to configure the CLK48 clock. + * @param __SOURCE__ specifies the CLK48 clock source. + * This parameter can be one of the following values: + * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock. + * @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock. + */ +#define __HAL_RCC_CLK48_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, (uint32_t)(__SOURCE__))) + +/** @brief Macro to Get the CLK48 clock. + * @retval The clock source can be one of the following values: + * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock. + * @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock. + */ +#define __HAL_RCC_GET_CLK48_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL)) + +/** @brief Macro to configure the SDIO clock. + * @param __SOURCE__ specifies the SDIO clock source. + * This parameter can be one of the following values: + * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock. + * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock. + */ +#define __HAL_RCC_SDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL, (uint32_t)(__SOURCE__))) + +/** @brief Macro to Get the SDIO clock. + * @retval The clock source can be one of the following values: + * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock. + * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock. + */ +#define __HAL_RCC_GET_SDIO_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL)) + +/** @brief Macro to configure the SPDIFRX clock. + * @param __SOURCE__ specifies the SPDIFRX clock source. + * This parameter can be one of the following values: + * @arg RCC_SPDIFRXCLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SPDIFRX clock. + * @arg RCC_SPDIFRXCLKSOURCE_PLLI2SP: PLLI2S VCO Output divided by PLLI2SP used as SPDIFRX clock. + */ +#define __HAL_RCC_SPDIFRX_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SPDIFRXSEL, (uint32_t)(__SOURCE__))) + +/** @brief Macro to Get the SPDIFRX clock. + * @retval The clock source can be one of the following values: + * @arg RCC_SPDIFRXCLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SPDIFRX clock. + * @arg RCC_SPDIFRXCLKSOURCE_PLLI2SP: PLLI2S VCO Output divided by PLLI2SP used as SPDIFRX clock. + */ +#define __HAL_RCC_GET_SPDIFRX_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SPDIFRXSEL)) +#endif /* STM32F446xx */ + +#if defined(STM32F469xx) || defined(STM32F479xx) + +/** @brief Macro to configure the CLK48 clock. + * @param __SOURCE__ specifies the CLK48 clock source. + * This parameter can be one of the following values: + * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock. + * @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock. + */ +#define __HAL_RCC_CLK48_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CK48MSEL, (uint32_t)(__SOURCE__))) + +/** @brief Macro to Get the CLK48 clock. + * @retval The clock source can be one of the following values: + * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock. + * @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock. + */ +#define __HAL_RCC_GET_CLK48_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CK48MSEL)) + +/** @brief Macro to configure the SDIO clock. + * @param __SOURCE__ specifies the SDIO clock source. + * This parameter can be one of the following values: + * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock. + * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock. + */ +#define __HAL_RCC_SDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SDIOSEL, (uint32_t)(__SOURCE__))) + +/** @brief Macro to Get the SDIO clock. + * @retval The clock source can be one of the following values: + * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock. + * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock. + */ +#define __HAL_RCC_GET_SDIO_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SDIOSEL)) + +/** @brief Macro to configure the DSI clock. + * @param __SOURCE__ specifies the DSI clock source. + * This parameter can be one of the following values: + * @arg RCC_DSICLKSOURCE_PLLR: PLLR output used as DSI clock. + * @arg RCC_DSICLKSOURCE_DSIPHY: DSI-PHY output used as DSI clock. + */ +#define __HAL_RCC_DSI_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_DSISEL, (uint32_t)(__SOURCE__))) + +/** @brief Macro to Get the DSI clock. + * @retval The clock source can be one of the following values: + * @arg RCC_DSICLKSOURCE_PLLR: PLLR output used as DSI clock. + * @arg RCC_DSICLKSOURCE_DSIPHY: DSI-PHY output used as DSI clock. + */ +#define __HAL_RCC_GET_DSI_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_DSISEL)) + +#endif /* STM32F469xx || STM32F479xx */ + +#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ + defined(STM32F413xx) || defined(STM32F423xx) + /** @brief Macro to configure the DFSDM1 clock. + * @param __DFSDM1_CLKSOURCE__ specifies the DFSDM1 clock source. + * This parameter can be one of the following values: + * @arg RCC_DFSDM1CLKSOURCE_PCLK2: PCLK2 clock used as kernel clock. + * @arg RCC_DFSDM1CLKSOURCE_SYSCLK: System clock used as kernel clock. + * @retval None + */ +#define __HAL_RCC_DFSDM1_CONFIG(__DFSDM1_CLKSOURCE__) MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL, (__DFSDM1_CLKSOURCE__)) + +/** @brief Macro to get the DFSDM1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_DFSDM1CLKSOURCE_PCLK2: PCLK2 clock used as kernel clock. + * @arg RCC_DFSDM1CLKSOURCE_SYSCLK: System clock used as kernel clock. + */ +#define __HAL_RCC_GET_DFSDM1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL))) + +/** @brief Macro to configure DFSDM1 Audio clock source selection. + * @note This configuration is only available with STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx/ + STM32F413xx/STM32F423xx Devices. + * @param __SOURCE__ specifies the DFSDM1 Audio clock source. + * This parameter can be one of the following values: + * @arg RCC_DFSDM1AUDIOCLKSOURCE_I2S1: CK_I2S_PCLK1 selected as audio clock + * @arg RCC_DFSDM1AUDIOCLKSOURCE_I2S2: CK_I2S_PCLK2 selected as audio clock + */ +#define __HAL_RCC_DFSDM1AUDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1ASEL, (__SOURCE__))) + +/** @brief Macro to Get DFSDM1 Audio clock source selection. + * @note This configuration is only available with STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx/ + STM32F413xx/STM32F423xx Devices. + * @retval The clock source can be one of the following values: + * @arg RCC_DFSDM1AUDIOCLKSOURCE_I2S1: CK_I2S_PCLK1 selected as audio clock + * @arg RCC_DFSDM1AUDIOCLKSOURCE_I2S2: CK_I2S_PCLK2 selected as audio clock + */ +#define __HAL_RCC_GET_DFSDM1AUDIO_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1ASEL)) + +#if defined(STM32F413xx) || defined(STM32F423xx) + /** @brief Macro to configure the DFSDM2 clock. + * @param __DFSDM2_CLKSOURCE__ specifies the DFSDM1 clock source. + * This parameter can be one of the following values: + * @arg RCC_DFSDM2CLKSOURCE_PCLK2: PCLK2 clock used as kernel clock. + * @arg RCC_DFSDM2CLKSOURCE_SYSCLK: System clock used as kernel clock. + * @retval None + */ +#define __HAL_RCC_DFSDM2_CONFIG(__DFSDM2_CLKSOURCE__) MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL, (__DFSDM2_CLKSOURCE__)) + +/** @brief Macro to get the DFSDM2 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_DFSDM2CLKSOURCE_PCLK2: PCLK2 clock used as kernel clock. + * @arg RCC_DFSDM2CLKSOURCE_SYSCLK: System clock used as kernel clock. + */ +#define __HAL_RCC_GET_DFSDM2_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL))) + +/** @brief Macro to configure DFSDM1 Audio clock source selection. + * @note This configuration is only available with STM32F413xx/STM32F423xx Devices. + * @param __SOURCE__ specifies the DFSDM2 Audio clock source. + * This parameter can be one of the following values: + * @arg RCC_DFSDM2AUDIOCLKSOURCE_I2S1: CK_I2S_PCLK1 selected as audio clock + * @arg RCC_DFSDM2AUDIOCLKSOURCE_I2S2: CK_I2S_PCLK2 selected as audio clock + */ +#define __HAL_RCC_DFSDM2AUDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM2ASEL, (__SOURCE__))) + +/** @brief Macro to Get DFSDM2 Audio clock source selection. + * @note This configuration is only available with STM32F413xx/STM32F423xx Devices. + * @retval The clock source can be one of the following values: + * @arg RCC_DFSDM2AUDIOCLKSOURCE_I2S1: CK_I2S_PCLK1 selected as audio clock + * @arg RCC_DFSDM2AUDIOCLKSOURCE_I2S2: CK_I2S_PCLK2 selected as audio clock + */ +#define __HAL_RCC_GET_DFSDM2AUDIO_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM2ASEL)) + +/** @brief Macro to configure SAI1BlockA clock source selection. + * @note The SAI peripheral is only available with STM32F413xx/STM32F423xx Devices. + * @note This function must be called before enabling PLLSAI, PLLI2S and + * the SAI clock. + * @param __SOURCE__ specifies the SAI Block A clock source. + * This parameter can be one of the following values: + * @arg RCC_SAIACLKSOURCE_PLLI2SR: PLLI2S_R clock divided (R2) used as SAI1 Block A clock. + * @arg RCC_SAIACLKSOURCE_EXT: External clock mapped on the I2S_CKIN pinused as SAI1 Block A clock. + * @arg RCC_SAIACLKSOURCE_PLLR: PLL_R clock divided (R1) used as SAI1 Block A clock. + * @arg RCC_SAIACLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. + */ +#define __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1ASRC, (__SOURCE__))) + +/** @brief Macro to Get SAI1 BlockA clock source selection. + * @note This configuration is only available with STM32F413xx/STM32F423xx Devices. + * @retval The clock source can be one of the following values: + * @arg RCC_SAIACLKSOURCE_PLLI2SR: PLLI2S_R clock divided (R2) used as SAI1 Block A clock. + * @arg RCC_SAIACLKSOURCE_EXT: External clock mapped on the I2S_CKIN pinused as SAI1 Block A clock. + * @arg RCC_SAIACLKSOURCE_PLLR: PLL_R clock divided (R1) used as SAI1 Block A clock. + * @arg RCC_SAIACLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. + */ +#define __HAL_RCC_GET_SAI_BLOCKA_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI1ASRC)) + +/** @brief Macro to configure SAI1 BlockB clock source selection. + * @note The SAI peripheral is only available with STM32F413xx/STM32F423xx Devices. + * @note This function must be called before enabling PLLSAI, PLLI2S and + * the SAI clock. + * @param __SOURCE__ specifies the SAI Block B clock source. + * This parameter can be one of the following values: + * @arg RCC_SAIBCLKSOURCE_PLLI2SR: PLLI2S_R clock divided (R2) used as SAI1 Block A clock. + * @arg RCC_SAIBCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 Block A clock. + * @arg RCC_SAIBCLKSOURCE_PLLR: PLL_R clock divided (R1) used as SAI1 Block A clock. + * @arg RCC_SAIBCLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. + */ +#define __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1BSRC, (__SOURCE__))) + +/** @brief Macro to Get SAI1 BlockB clock source selection. + * @note This configuration is only available with STM32F413xx/STM32F423xx Devices. + * @retval The clock source can be one of the following values: + * @arg RCC_SAIBCLKSOURCE_PLLI2SR: PLLI2S_R clock divided (R2) used as SAI1 Block A clock. + * @arg RCC_SAIBCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 Block A clock. + * @arg RCC_SAIBCLKSOURCE_PLLR: PLL_R clock divided (R1) used as SAI1 Block A clock. + * @arg RCC_SAIBCLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. + */ +#define __HAL_RCC_GET_SAI_BLOCKB_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI1BSRC)) + +/** @brief Macro to configure the LPTIM1 clock. + * @param __SOURCE__ specifies the LPTIM1 clock source. + * This parameter can be one of the following values: + * @arg RCC_LPTIM1CLKSOURCE_PCLK1: PCLK selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_HSI: HSI clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock + */ +#define __HAL_RCC_LPTIM1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL, (uint32_t)(__SOURCE__))) + +/** @brief Macro to Get the LPTIM1 clock. + * @retval The clock source can be one of the following values: + * @arg RCC_LPTIM1CLKSOURCE_PCLK1: PCLK selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_HSI: HSI clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock + */ +#define __HAL_RCC_GET_LPTIM1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL)) +#endif /* STM32F413xx || STM32F423xx */ + +/** @brief Macro to configure I2S APB1 clock source selection. + * @param __SOURCE__ specifies the I2S APB1 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR. + * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin. + * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR. + * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. + */ +#define __HAL_RCC_I2S_APB1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC, (__SOURCE__))) + +/** @brief Macro to Get I2S APB1 clock source selection. + * @retval The clock source can be one of the following values: + * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR. + * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin. + * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR. + * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. + */ +#define __HAL_RCC_GET_I2S_APB1_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC)) + +/** @brief Macro to configure I2S APB2 clock source selection. + * @param __SOURCE__ specifies the I2S APB2 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR. + * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin. + * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR. + * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. + */ +#define __HAL_RCC_I2S_APB2_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC, (__SOURCE__))) + +/** @brief Macro to Get I2S APB2 clock source selection. + * @retval The clock source can be one of the following values: + * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR. + * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin. + * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR. + * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. + */ +#define __HAL_RCC_GET_I2S_APB2_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC)) + +/** @brief Macro to configure the PLL I2S clock source (PLLI2SCLK). + * @note This macro must be called before enabling the I2S APB clock. + * @param __SOURCE__ specifies the I2S clock source. + * This parameter can be one of the following values: + * @arg RCC_PLLI2SCLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. + * @arg RCC_PLLI2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin + * used as I2S clock source. + */ +#define __HAL_RCC_PLL_I2S_CONFIG(__SOURCE__) (*(__IO uint32_t *) RCC_PLLI2SCFGR_PLLI2SSRC_BB = (__SOURCE__)) + +/** @brief Macro to configure the FMPI2C1 clock. + * @param __SOURCE__ specifies the FMPI2C1 clock source. + * This parameter can be one of the following values: + * @arg RCC_FMPI2C1CLKSOURCE_PCLK1: PCLK1 selected as FMPI2C1 clock + * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock + * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock + */ +#define __HAL_RCC_FMPI2C1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, (uint32_t)(__SOURCE__))) + +/** @brief Macro to Get the FMPI2C1 clock. + * @retval The clock source can be one of the following values: + * @arg RCC_FMPI2C1CLKSOURCE_PCLK1: PCLK1 selected as FMPI2C1 clock + * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock + * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock + */ +#define __HAL_RCC_GET_FMPI2C1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL)) + +/** @brief Macro to configure the CLK48 clock. + * @param __SOURCE__ specifies the CLK48 clock source. + * This parameter can be one of the following values: + * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock. + * @arg RCC_CLK48CLKSOURCE_PLLI2SQ: PLLI2S VCO Output divided by PLLI2SQ used as CLK48 clock. + */ +#define __HAL_RCC_CLK48_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, (uint32_t)(__SOURCE__))) + +/** @brief Macro to Get the CLK48 clock. + * @retval The clock source can be one of the following values: + * @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock. + * @arg RCC_CLK48CLKSOURCE_PLLI2SQ: PLLI2S VCO Output divided by PLLI2SQ used as CLK48 clock + */ +#define __HAL_RCC_GET_CLK48_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL)) + +/** @brief Macro to configure the SDIO clock. + * @param __SOURCE__ specifies the SDIO clock source. + * This parameter can be one of the following values: + * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock. + * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock. + */ +#define __HAL_RCC_SDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL, (uint32_t)(__SOURCE__))) + +/** @brief Macro to Get the SDIO clock. + * @retval The clock source can be one of the following values: + * @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock. + * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock. + */ +#define __HAL_RCC_GET_SDIO_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL)) + +#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ + +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) +/** @brief Macro to configure I2S clock source selection. + * @param __SOURCE__ specifies the I2S clock source. + * This parameter can be one of the following values: + * @arg RCC_I2SAPBCLKSOURCE_PLLR: PLL VCO output clock divided by PLLR. + * @arg RCC_I2SAPBCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin. + * @arg RCC_I2SAPBCLKSOURCE_PLLSRC: HSI/HSE depends on PLLSRC. + */ +#define __HAL_RCC_I2S_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2SSRC, (__SOURCE__))) + +/** @brief Macro to Get I2S clock source selection. + * @retval The clock source can be one of the following values: + * @arg RCC_I2SAPBCLKSOURCE_PLLR: PLL VCO output clock divided by PLLR. + * @arg RCC_I2SAPBCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin. + * @arg RCC_I2SAPBCLKSOURCE_PLLSRC: HSI/HSE depends on PLLSRC. + */ +#define __HAL_RCC_GET_I2S_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2SSRC)) + +/** @brief Macro to configure the FMPI2C1 clock. + * @param __SOURCE__ specifies the FMPI2C1 clock source. + * This parameter can be one of the following values: + * @arg RCC_FMPI2C1CLKSOURCE_PCLK1: PCLK1 selected as FMPI2C1 clock + * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock + * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock + */ +#define __HAL_RCC_FMPI2C1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, (uint32_t)(__SOURCE__))) + +/** @brief Macro to Get the FMPI2C1 clock. + * @retval The clock source can be one of the following values: + * @arg RCC_FMPI2C1CLKSOURCE_PCLK1: PCLK1 selected as FMPI2C1 clock + * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock + * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock + */ +#define __HAL_RCC_GET_FMPI2C1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL)) + +/** @brief Macro to configure the LPTIM1 clock. + * @param __SOURCE__ specifies the LPTIM1 clock source. + * This parameter can be one of the following values: + * @arg RCC_LPTIM1CLKSOURCE_PCLK1: PCLK1 selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_HSI: HSI clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock + */ +#define __HAL_RCC_LPTIM1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL, (uint32_t)(__SOURCE__))) + +/** @brief Macro to Get the LPTIM1 clock. + * @retval The clock source can be one of the following values: + * @arg RCC_LPTIM1CLKSOURCE_PCLK1: PCLK1 selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_HSI: HSI clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock + */ +#define __HAL_RCC_GET_LPTIM1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL)) +#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ + defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\ + defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ + defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ + defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +/** @brief Macro to configure the Timers clocks prescalers + * @note This feature is only available with STM32F429x/439x Devices. + * @param __PRESC__ specifies the Timers clocks prescalers selection + * This parameter can be one of the following values: + * @arg RCC_TIMPRES_DESACTIVATED: The Timers kernels clocks prescaler is + * equal to HPRE if PPREx is corresponding to division by 1 or 2, + * else it is equal to [(HPRE * PPREx) / 2] if PPREx is corresponding to + * division by 4 or more. + * @arg RCC_TIMPRES_ACTIVATED: The Timers kernels clocks prescaler is + * equal to HPRE if PPREx is corresponding to division by 1, 2 or 4, + * else it is equal to [(HPRE * PPREx) / 4] if PPREx is corresponding + * to division by 8 or more. + */ +#define __HAL_RCC_TIMCLKPRESCALER(__PRESC__) (*(__IO uint32_t *) RCC_DCKCFGR_TIMPRE_BB = (__PRESC__)) + +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx) || STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE ||\ + STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx ||\ + STM32F423xx */ + +/*----------------------------------------------------------------------------*/ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) +/** @brief Enable PLLSAI_RDY interrupt. + */ +#define __HAL_RCC_PLLSAI_ENABLE_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYIE)) + +/** @brief Disable PLLSAI_RDY interrupt. + */ +#define __HAL_RCC_PLLSAI_DISABLE_IT() (RCC->CIR &= ~(RCC_CIR_PLLSAIRDYIE)) + +/** @brief Clear the PLLSAI RDY interrupt pending bits. + */ +#define __HAL_RCC_PLLSAI_CLEAR_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYF)) + +/** @brief Check the PLLSAI RDY interrupt has occurred or not. + * @retval The new state (TRUE or FALSE). + */ +#define __HAL_RCC_PLLSAI_GET_IT() ((RCC->CIR & (RCC_CIR_PLLSAIRDYIE)) == (RCC_CIR_PLLSAIRDYIE)) + +/** @brief Check PLLSAI RDY flag is set or not. + * @retval The new state (TRUE or FALSE). + */ +#define __HAL_RCC_PLLSAI_GET_FLAG() ((RCC->CR & (RCC_CR_PLLSAIRDY)) == (RCC_CR_PLLSAIRDY)) + +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ + +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) +/** @brief Macros to enable or disable the RCC MCO1 feature. + */ +#define __HAL_RCC_MCO1_ENABLE() (*(__IO uint32_t *) RCC_CFGR_MCO1EN_BB = ENABLE) +#define __HAL_RCC_MCO1_DISABLE() (*(__IO uint32_t *) RCC_CFGR_MCO1EN_BB = DISABLE) + +/** @brief Macros to enable or disable the RCC MCO2 feature. + */ +#define __HAL_RCC_MCO2_ENABLE() (*(__IO uint32_t *) RCC_CFGR_MCO2EN_BB = ENABLE) +#define __HAL_RCC_MCO2_DISABLE() (*(__IO uint32_t *) RCC_CFGR_MCO2EN_BB = DISABLE) + +#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCCEx_Exported_Functions + * @{ + */ + +/** @addtogroup RCCEx_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); + +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk); + +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) ||\ + defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\ + defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\ + defined(STM32F423xx) +void HAL_RCCEx_SelectLSEMode(uint8_t Mode); +#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ +#if defined(RCC_PLLI2S_SUPPORT) +HAL_StatusTypeDef HAL_RCCEx_EnablePLLI2S(RCC_PLLI2SInitTypeDef *PLLI2SInit); +HAL_StatusTypeDef HAL_RCCEx_DisablePLLI2S(void); +#endif /* RCC_PLLI2S_SUPPORT */ +#if defined(RCC_PLLSAI_SUPPORT) +HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI(RCC_PLLSAIInitTypeDef *PLLSAIInit); +HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI(void); +#endif /* RCC_PLLSAI_SUPPORT */ +/** + * @} + */ + +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RCCEx_Private_Constants RCCEx Private Constants + * @{ + */ + +/** @defgroup RCCEx_BitAddress_AliasRegion RCC BitAddress AliasRegion + * @brief RCC registers bit address in the alias region + * @{ + */ +/* --- CR Register ---*/ +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ + defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) +/* Alias word address of PLLSAION bit */ +#define RCC_PLLSAION_BIT_NUMBER 0x1CU +#define RCC_CR_PLLSAION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_PLLSAION_BIT_NUMBER * 4U)) + +#define PLLSAI_TIMEOUT_VALUE 2U /* Timeout value fixed to 2 ms */ +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ + defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ + defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ + defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ + defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +/* Alias word address of PLLI2SON bit */ +#define RCC_PLLI2SON_BIT_NUMBER 0x1AU +#define RCC_CR_PLLI2SON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_PLLI2SON_BIT_NUMBER * 4U)) +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || + STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || + STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ + +/* --- DCKCFGR Register ---*/ +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ + defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F401xC) ||\ + defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\ + defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\ + defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +/* Alias word address of TIMPRE bit */ +#define RCC_DCKCFGR_OFFSET (RCC_OFFSET + 0x8CU) +#define RCC_TIMPRE_BIT_NUMBER 0x18U +#define RCC_DCKCFGR_TIMPRE_BB (PERIPH_BB_BASE + (RCC_DCKCFGR_OFFSET * 32U) + (RCC_TIMPRE_BIT_NUMBER * 4U)) +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F410xx || STM32F401xC ||\ + STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\ + STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ + +/* --- CFGR Register ---*/ +#define RCC_CFGR_OFFSET (RCC_OFFSET + 0x08U) +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ + defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ + defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ + defined(STM32F469xx) || defined(STM32F479xx) +/* Alias word address of I2SSRC bit */ +#define RCC_I2SSRC_BIT_NUMBER 0x17U +#define RCC_CFGR_I2SSRC_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32U) + (RCC_I2SSRC_BIT_NUMBER * 4U)) + +#define PLLI2S_TIMEOUT_VALUE 2U /* Timeout value fixed to 2 ms */ +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || + STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx */ + +#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ + defined(STM32F413xx) || defined(STM32F423xx) +/* --- PLLI2SCFGR Register ---*/ +#define RCC_PLLI2SCFGR_OFFSET (RCC_OFFSET + 0x84U) +/* Alias word address of PLLI2SSRC bit */ +#define RCC_PLLI2SSRC_BIT_NUMBER 0x16U +#define RCC_PLLI2SCFGR_PLLI2SSRC_BB (PERIPH_BB_BASE + (RCC_PLLI2SCFGR_OFFSET * 32U) + (RCC_PLLI2SSRC_BIT_NUMBER * 4U)) + +#define PLLI2S_TIMEOUT_VALUE 2U /* Timeout value fixed to 2 ms */ +#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx | STM32F423xx */ + +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) +/* Alias word address of MCO1EN bit */ +#define RCC_MCO1EN_BIT_NUMBER 0x8U +#define RCC_CFGR_MCO1EN_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32U) + (RCC_MCO1EN_BIT_NUMBER * 4U)) + +/* Alias word address of MCO2EN bit */ +#define RCC_MCO2EN_BIT_NUMBER 0x9U +#define RCC_CFGR_MCO2EN_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32U) + (RCC_MCO2EN_BIT_NUMBER * 4U)) +#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ + +#define PLL_TIMEOUT_VALUE 2U /* 2 ms */ +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RCCEx_Private_Macros RCCEx Private Macros + * @{ + */ +/** @defgroup RCCEx_IS_RCC_Definitions RCC Private macros to check input parameters + * @{ + */ +#define IS_RCC_PLLN_VALUE(VALUE) ((50U <= (VALUE)) && ((VALUE) <= 432U)) +#define IS_RCC_PLLI2SN_VALUE(VALUE) ((50U <= (VALUE)) && ((VALUE) <= 432U)) + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) +#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x0000007FU)) +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) +#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x00000007U)) +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ + +#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) +#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x0000000FU)) +#endif /* STM32F401xC || STM32F401xE || STM32F411xE */ + +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) +#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x0000001FU)) +#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ + +#if defined(STM32F446xx) +#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x00000FFFU)) +#endif /* STM32F446xx */ + +#if defined(STM32F469xx) || defined(STM32F479xx) +#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x000001FFU)) +#endif /* STM32F469xx || STM32F479xx */ + +#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) +#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x000003FFU)) +#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */ + +#if defined(STM32F413xx) || defined(STM32F423xx) +#define IS_RCC_PERIPHCLOCK(SELECTION) ((1U <= (SELECTION)) && ((SELECTION) <= 0x00007FFFU)) +#endif /* STM32F413xx || STM32F423xx */ + +#define IS_RCC_PLLI2SR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U)) + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\ + defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) +#define IS_RCC_PLLI2SQ_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 15U)) + +#define IS_RCC_PLLSAIN_VALUE(VALUE) ((50U <= (VALUE)) && ((VALUE) <= 432U)) + +#define IS_RCC_PLLSAIQ_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 15U)) + +#define IS_RCC_PLLSAIR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U)) + +#define IS_RCC_PLLSAI_DIVQ_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 32U)) + +#define IS_RCC_PLLI2S_DIVQ_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 32U)) + +#define IS_RCC_PLLSAI_DIVR_VALUE(VALUE) (((VALUE) == RCC_PLLSAIDIVR_2) ||\ + ((VALUE) == RCC_PLLSAIDIVR_4) ||\ + ((VALUE) == RCC_PLLSAIDIVR_8) ||\ + ((VALUE) == RCC_PLLSAIDIVR_16)) +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ + +#if defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ + defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) +#define IS_RCC_PLLI2SM_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 63U)) + +#define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\ + ((MODE) == RCC_LSE_HIGHDRIVE_MODE)) +#endif /* STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ + +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) +#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U)) + +#define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\ + ((MODE) == RCC_LSE_HIGHDRIVE_MODE)) + +#define IS_RCC_FMPI2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_FMPI2C1CLKSOURCE_PCLK1) ||\ + ((SOURCE) == RCC_FMPI2C1CLKSOURCE_SYSCLK) ||\ + ((SOURCE) == RCC_FMPI2C1CLKSOURCE_HSI)) + +#define IS_RCC_LPTIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_LPTIM1CLKSOURCE_PCLK1) ||\ + ((SOURCE) == RCC_LPTIM1CLKSOURCE_HSI) ||\ + ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSI) ||\ + ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSE)) + +#define IS_RCC_I2SAPBCLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPBCLKSOURCE_PLLR) ||\ + ((SOURCE) == RCC_I2SAPBCLKSOURCE_EXT) ||\ + ((SOURCE) == RCC_I2SAPBCLKSOURCE_PLLSRC)) +#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ + +#if defined(STM32F446xx) +#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U)) + +#define IS_RCC_PLLI2SP_VALUE(VALUE) (((VALUE) == RCC_PLLI2SP_DIV2) ||\ + ((VALUE) == RCC_PLLI2SP_DIV4) ||\ + ((VALUE) == RCC_PLLI2SP_DIV6) ||\ + ((VALUE) == RCC_PLLI2SP_DIV8)) + +#define IS_RCC_PLLSAIM_VALUE(VALUE) ((VALUE) <= 63U) + +#define IS_RCC_PLLSAIP_VALUE(VALUE) (((VALUE) == RCC_PLLSAIP_DIV2) ||\ + ((VALUE) == RCC_PLLSAIP_DIV4) ||\ + ((VALUE) == RCC_PLLSAIP_DIV6) ||\ + ((VALUE) == RCC_PLLSAIP_DIV8)) + +#define IS_RCC_SAI1CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI1CLKSOURCE_PLLSAI) ||\ + ((SOURCE) == RCC_SAI1CLKSOURCE_PLLI2S) ||\ + ((SOURCE) == RCC_SAI1CLKSOURCE_PLLR) ||\ + ((SOURCE) == RCC_SAI1CLKSOURCE_EXT)) + +#define IS_RCC_SAI2CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI2CLKSOURCE_PLLSAI) ||\ + ((SOURCE) == RCC_SAI2CLKSOURCE_PLLI2S) ||\ + ((SOURCE) == RCC_SAI2CLKSOURCE_PLLR) ||\ + ((SOURCE) == RCC_SAI2CLKSOURCE_PLLSRC)) + +#define IS_RCC_I2SAPB1CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLI2S) ||\ + ((SOURCE) == RCC_I2SAPB1CLKSOURCE_EXT) ||\ + ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLR) ||\ + ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLSRC)) + + #define IS_RCC_I2SAPB2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLI2S) ||\ + ((SOURCE) == RCC_I2SAPB2CLKSOURCE_EXT) ||\ + ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLR) ||\ + ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLSRC)) + +#define IS_RCC_FMPI2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_FMPI2C1CLKSOURCE_PCLK1) ||\ + ((SOURCE) == RCC_FMPI2C1CLKSOURCE_SYSCLK) ||\ + ((SOURCE) == RCC_FMPI2C1CLKSOURCE_HSI)) + +#define IS_RCC_CECCLKSOURCE(SOURCE) (((SOURCE) == RCC_CECCLKSOURCE_HSI) ||\ + ((SOURCE) == RCC_CECCLKSOURCE_LSE)) + +#define IS_RCC_CLK48CLKSOURCE(SOURCE) (((SOURCE) == RCC_CLK48CLKSOURCE_PLLQ) ||\ + ((SOURCE) == RCC_CLK48CLKSOURCE_PLLSAIP)) + +#define IS_RCC_SDIOCLKSOURCE(SOURCE) (((SOURCE) == RCC_SDIOCLKSOURCE_CLK48) ||\ + ((SOURCE) == RCC_SDIOCLKSOURCE_SYSCLK)) + +#define IS_RCC_SPDIFRXCLKSOURCE(SOURCE) (((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLLR) ||\ + ((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLLI2SP)) +#endif /* STM32F446xx */ + +#if defined(STM32F469xx) || defined(STM32F479xx) +#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U)) + +#define IS_RCC_PLLSAIP_VALUE(VALUE) (((VALUE) == RCC_PLLSAIP_DIV2) ||\ + ((VALUE) == RCC_PLLSAIP_DIV4) ||\ + ((VALUE) == RCC_PLLSAIP_DIV6) ||\ + ((VALUE) == RCC_PLLSAIP_DIV8)) + +#define IS_RCC_CLK48CLKSOURCE(SOURCE) (((SOURCE) == RCC_CLK48CLKSOURCE_PLLQ) ||\ + ((SOURCE) == RCC_CLK48CLKSOURCE_PLLSAIP)) + +#define IS_RCC_SDIOCLKSOURCE(SOURCE) (((SOURCE) == RCC_SDIOCLKSOURCE_CLK48) ||\ + ((SOURCE) == RCC_SDIOCLKSOURCE_SYSCLK)) + +#define IS_RCC_DSIBYTELANECLKSOURCE(SOURCE) (((SOURCE) == RCC_DSICLKSOURCE_PLLR) ||\ + ((SOURCE) == RCC_DSICLKSOURCE_DSIPHY)) + +#define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\ + ((MODE) == RCC_LSE_HIGHDRIVE_MODE)) +#endif /* STM32F469xx || STM32F479xx */ + +#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\ + defined(STM32F413xx) || defined(STM32F423xx) +#define IS_RCC_PLLI2SQ_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 15U)) + +#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U)) + +#define IS_RCC_PLLI2SCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_PLLI2SCLKSOURCE_PLLSRC) || \ + ((__SOURCE__) == RCC_PLLI2SCLKSOURCE_EXT)) + +#define IS_RCC_I2SAPB1CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLI2S) ||\ + ((SOURCE) == RCC_I2SAPB1CLKSOURCE_EXT) ||\ + ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLR) ||\ + ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLSRC)) + + #define IS_RCC_I2SAPB2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLI2S) ||\ + ((SOURCE) == RCC_I2SAPB2CLKSOURCE_EXT) ||\ + ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLR) ||\ + ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLSRC)) + +#define IS_RCC_FMPI2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_FMPI2C1CLKSOURCE_PCLK1) ||\ + ((SOURCE) == RCC_FMPI2C1CLKSOURCE_SYSCLK) ||\ + ((SOURCE) == RCC_FMPI2C1CLKSOURCE_HSI)) + +#define IS_RCC_CLK48CLKSOURCE(SOURCE) (((SOURCE) == RCC_CLK48CLKSOURCE_PLLQ) ||\ + ((SOURCE) == RCC_CLK48CLKSOURCE_PLLI2SQ)) + +#define IS_RCC_SDIOCLKSOURCE(SOURCE) (((SOURCE) == RCC_SDIOCLKSOURCE_CLK48) ||\ + ((SOURCE) == RCC_SDIOCLKSOURCE_SYSCLK)) + +#define IS_RCC_DFSDM1CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_DFSDM1CLKSOURCE_PCLK2) || \ + ((__SOURCE__) == RCC_DFSDM1CLKSOURCE_SYSCLK)) + +#define IS_RCC_DFSDM1AUDIOCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_DFSDM1AUDIOCLKSOURCE_I2S1) || \ + ((__SOURCE__) == RCC_DFSDM1AUDIOCLKSOURCE_I2S2)) + +#if defined(STM32F413xx) || defined(STM32F423xx) +#define IS_RCC_DFSDM2CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_DFSDM2CLKSOURCE_PCLK2) || \ + ((__SOURCE__) == RCC_DFSDM2CLKSOURCE_SYSCLK)) + +#define IS_RCC_DFSDM2AUDIOCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_DFSDM2AUDIOCLKSOURCE_I2S1) || \ + ((__SOURCE__) == RCC_DFSDM2AUDIOCLKSOURCE_I2S2)) + +#define IS_RCC_LPTIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_LPTIM1CLKSOURCE_PCLK1) ||\ + ((SOURCE) == RCC_LPTIM1CLKSOURCE_HSI) ||\ + ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSI) ||\ + ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSE)) + +#define IS_RCC_SAIACLKSOURCE(SOURCE) (((SOURCE) == RCC_SAIACLKSOURCE_PLLI2SR) ||\ + ((SOURCE) == RCC_SAIACLKSOURCE_EXT) ||\ + ((SOURCE) == RCC_SAIACLKSOURCE_PLLR) ||\ + ((SOURCE) == RCC_SAIACLKSOURCE_PLLSRC)) + +#define IS_RCC_SAIBCLKSOURCE(SOURCE) (((SOURCE) == RCC_SAIBCLKSOURCE_PLLI2SR) ||\ + ((SOURCE) == RCC_SAIBCLKSOURCE_EXT) ||\ + ((SOURCE) == RCC_SAIBCLKSOURCE_PLLR) ||\ + ((SOURCE) == RCC_SAIBCLKSOURCE_PLLSRC)) + +#define IS_RCC_PLL_DIVR_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 32U)) + +#define IS_RCC_PLLI2S_DIVR_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 32U)) + +#endif /* STM32F413xx || STM32F423xx */ +#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ + defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ + defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ + defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ + defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx) + +#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2SOURCE_SYSCLK) || ((SOURCE) == RCC_MCO2SOURCE_PLLI2SCLK)|| \ + ((SOURCE) == RCC_MCO2SOURCE_HSE) || ((SOURCE) == RCC_MCO2SOURCE_PLLCLK)) + +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || + STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || \ + STM32F412Rx */ + +#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) +#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2SOURCE_SYSCLK) || ((SOURCE) == RCC_MCO2SOURCE_I2SCLK)|| \ + ((SOURCE) == RCC_MCO2SOURCE_HSE) || ((SOURCE) == RCC_MCO2SOURCE_PLLCLK)) +#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_RCC_EX_H */ + diff --git a/Drivers/stm32f4xx_hal_rng.c b/libs/hal/stm32f4xx_hal_rng.c similarity index 96% rename from Drivers/stm32f4xx_hal_rng.c rename to libs/hal/stm32f4xx_hal_rng.c index cbfd32b..bd50438 100644 --- a/Drivers/stm32f4xx_hal_rng.c +++ b/libs/hal/stm32f4xx_hal_rng.c @@ -1,867 +1,867 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_rng.c - * @author MCD Application Team - * @brief RNG HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Random Number Generator (RNG) peripheral: - * + Initialization and configuration functions - * + Peripheral Control functions - * + Peripheral State functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The RNG HAL driver can be used as follows: - - (#) Enable the RNG controller clock using __HAL_RCC_RNG_CLK_ENABLE() macro - in HAL_RNG_MspInit(). - (#) Activate the RNG peripheral using HAL_RNG_Init() function. - (#) Wait until the 32 bit Random Number Generator contains a valid - random data using (polling/interrupt) mode. - (#) Get the 32 bit random number using HAL_RNG_GenerateRandomNumber() function. - - ##### Callback registration ##### - ================================== - - [..] - The compilation define USE_HAL_RNG_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - - [..] - Use Function HAL_RNG_RegisterCallback() to register a user callback. - Function HAL_RNG_RegisterCallback() allows to register following callbacks: - (+) ErrorCallback : RNG Error Callback. - (+) MspInitCallback : RNG MspInit. - (+) MspDeInitCallback : RNG MspDeInit. - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - - [..] - Use function HAL_RNG_UnRegisterCallback() to reset a callback to the default - weak (surcharged) function. - HAL_RNG_UnRegisterCallback() takes as parameters the HAL peripheral handle, - and the Callback ID. - This function allows to reset following callbacks: - (+) ErrorCallback : RNG Error Callback. - (+) MspInitCallback : RNG MspInit. - (+) MspDeInitCallback : RNG MspDeInit. - - [..] - For specific callback ReadyDataCallback, use dedicated register callbacks: - respectively HAL_RNG_RegisterReadyDataCallback() , HAL_RNG_UnRegisterReadyDataCallback(). - - [..] - By default, after the HAL_RNG_Init() and when the state is HAL_RNG_STATE_RESET - all callbacks are set to the corresponding weak (surcharged) functions: - example HAL_RNG_ErrorCallback(). - Exception done for MspInit and MspDeInit functions that are respectively - reset to the legacy weak (surcharged) functions in the HAL_RNG_Init() - and HAL_RNG_DeInit() only when these callbacks are null (not registered beforehand). - If not, MspInit or MspDeInit are not null, the HAL_RNG_Init() and HAL_RNG_DeInit() - keep and use the user MspInit/MspDeInit callbacks (registered beforehand). - - [..] - Callbacks can be registered/unregistered in HAL_RNG_STATE_READY state only. - Exception done MspInit/MspDeInit that can be registered/unregistered - in HAL_RNG_STATE_READY or HAL_RNG_STATE_RESET state, thus registered (user) - MspInit/DeInit callbacks can be used during the Init/DeInit. - In that case first register the MspInit/MspDeInit user callbacks - using HAL_RNG_RegisterCallback() before calling HAL_RNG_DeInit() - or HAL_RNG_Init() function. - - [..] - When The compilation define USE_HAL_RNG_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registration feature is not available - and weak (surcharged) callbacks are used. - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -#if defined (RNG) - -/** @addtogroup RNG - * @brief RNG HAL module driver. - * @{ - */ - -#ifdef HAL_RNG_MODULE_ENABLED - -/* Private types -------------------------------------------------------------*/ -/* Private defines -----------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup RNG_Private_Constants RNG Private Constants - * @{ - */ -#define RNG_TIMEOUT_VALUE 2U -/** - * @} - */ -/* Private macros ------------------------------------------------------------*/ -/* Private functions prototypes ----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup RNG_Exported_Functions - * @{ - */ - -/** @addtogroup RNG_Exported_Functions_Group1 - * @brief Initialization and configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and configuration functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Initialize the RNG according to the specified parameters - in the RNG_InitTypeDef and create the associated handle - (+) DeInitialize the RNG peripheral - (+) Initialize the RNG MSP - (+) DeInitialize RNG MSP - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the RNG peripheral and creates the associated handle. - * @param hrng pointer to a RNG_HandleTypeDef structure that contains - * the configuration information for RNG. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng) -{ - /* Check the RNG handle allocation */ - if (hrng == NULL) - { - return HAL_ERROR; - } - /* Check the parameters */ - assert_param(IS_RNG_ALL_INSTANCE(hrng->Instance)); - -#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) - if (hrng->State == HAL_RNG_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hrng->Lock = HAL_UNLOCKED; - - hrng->ReadyDataCallback = HAL_RNG_ReadyDataCallback; /* Legacy weak ReadyDataCallback */ - hrng->ErrorCallback = HAL_RNG_ErrorCallback; /* Legacy weak ErrorCallback */ - - if (hrng->MspInitCallback == NULL) - { - hrng->MspInitCallback = HAL_RNG_MspInit; /* Legacy weak MspInit */ - } - - /* Init the low level hardware */ - hrng->MspInitCallback(hrng); - } -#else - if (hrng->State == HAL_RNG_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hrng->Lock = HAL_UNLOCKED; - - /* Init the low level hardware */ - HAL_RNG_MspInit(hrng); - } -#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ - - /* Change RNG peripheral state */ - hrng->State = HAL_RNG_STATE_BUSY; - - - /* Enable the RNG Peripheral */ - __HAL_RNG_ENABLE(hrng); - - /* Initialize the RNG state */ - hrng->State = HAL_RNG_STATE_READY; - - /* Initialise the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_NONE; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief DeInitializes the RNG peripheral. - * @param hrng pointer to a RNG_HandleTypeDef structure that contains - * the configuration information for RNG. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RNG_DeInit(RNG_HandleTypeDef *hrng) -{ - /* Check the RNG handle allocation */ - if (hrng == NULL) - { - return HAL_ERROR; - } - - /* Disable the RNG Peripheral */ - CLEAR_BIT(hrng->Instance->CR, RNG_CR_IE | RNG_CR_RNGEN); - - /* Clear RNG interrupt status flags */ - CLEAR_BIT(hrng->Instance->SR, RNG_SR_CEIS | RNG_SR_SEIS); - -#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) - if (hrng->MspDeInitCallback == NULL) - { - hrng->MspDeInitCallback = HAL_RNG_MspDeInit; /* Legacy weak MspDeInit */ - } - - /* DeInit the low level hardware */ - hrng->MspDeInitCallback(hrng); -#else - /* DeInit the low level hardware */ - HAL_RNG_MspDeInit(hrng); -#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ - - /* Update the RNG state */ - hrng->State = HAL_RNG_STATE_RESET; - - /* Initialise the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_NONE; - - /* Release Lock */ - __HAL_UNLOCK(hrng); - - /* Return the function status */ - return HAL_OK; -} - -/** - * @brief Initializes the RNG MSP. - * @param hrng pointer to a RNG_HandleTypeDef structure that contains - * the configuration information for RNG. - * @retval None - */ -__weak void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hrng); - /* NOTE : This function should not be modified. When the callback is needed, - function HAL_RNG_MspInit must be implemented in the user file. - */ -} - -/** - * @brief DeInitializes the RNG MSP. - * @param hrng pointer to a RNG_HandleTypeDef structure that contains - * the configuration information for RNG. - * @retval None - */ -__weak void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hrng); - /* NOTE : This function should not be modified. When the callback is needed, - function HAL_RNG_MspDeInit must be implemented in the user file. - */ -} - -#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User RNG Callback - * To be used instead of the weak predefined callback - * @param hrng RNG handle - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_RNG_ERROR_CB_ID Error callback ID - * @arg @ref HAL_RNG_MSPINIT_CB_ID MspInit callback ID - * @arg @ref HAL_RNG_MSPDEINIT_CB_ID MspDeInit callback ID - * @param pCallback pointer to the Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID, - pRNG_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hrng); - - if (HAL_RNG_STATE_READY == hrng->State) - { - switch (CallbackID) - { - case HAL_RNG_ERROR_CB_ID : - hrng->ErrorCallback = pCallback; - break; - - case HAL_RNG_MSPINIT_CB_ID : - hrng->MspInitCallback = pCallback; - break; - - case HAL_RNG_MSPDEINIT_CB_ID : - hrng->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_RNG_STATE_RESET == hrng->State) - { - switch (CallbackID) - { - case HAL_RNG_MSPINIT_CB_ID : - hrng->MspInitCallback = pCallback; - break; - - case HAL_RNG_MSPDEINIT_CB_ID : - hrng->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hrng); - return status; -} - -/** - * @brief Unregister an RNG Callback - * RNG callback is redirected to the weak predefined callback - * @param hrng RNG handle - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg @ref HAL_RNG_ERROR_CB_ID Error callback ID - * @arg @ref HAL_RNG_MSPINIT_CB_ID MspInit callback ID - * @arg @ref HAL_RNG_MSPDEINIT_CB_ID MspDeInit callback ID - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RNG_UnRegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hrng); - - if (HAL_RNG_STATE_READY == hrng->State) - { - switch (CallbackID) - { - case HAL_RNG_ERROR_CB_ID : - hrng->ErrorCallback = HAL_RNG_ErrorCallback; /* Legacy weak ErrorCallback */ - break; - - case HAL_RNG_MSPINIT_CB_ID : - hrng->MspInitCallback = HAL_RNG_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_RNG_MSPDEINIT_CB_ID : - hrng->MspDeInitCallback = HAL_RNG_MspDeInit; /* Legacy weak MspDeInit */ - break; - - default : - /* Update the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_RNG_STATE_RESET == hrng->State) - { - switch (CallbackID) - { - case HAL_RNG_MSPINIT_CB_ID : - hrng->MspInitCallback = HAL_RNG_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_RNG_MSPDEINIT_CB_ID : - hrng->MspDeInitCallback = HAL_RNG_MspDeInit; /* Legacy weak MspInit */ - break; - - default : - /* Update the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hrng); - return status; -} - -/** - * @brief Register Data Ready RNG Callback - * To be used instead of the weak HAL_RNG_ReadyDataCallback() predefined callback - * @param hrng RNG handle - * @param pCallback pointer to the Data Ready Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RNG_RegisterReadyDataCallback(RNG_HandleTypeDef *hrng, pRNG_ReadyDataCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hrng); - - if (HAL_RNG_STATE_READY == hrng->State) - { - hrng->ReadyDataCallback = pCallback; - } - else - { - /* Update the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hrng); - return status; -} - -/** - * @brief UnRegister the Data Ready RNG Callback - * Data Ready RNG Callback is redirected to the weak HAL_RNG_ReadyDataCallback() predefined callback - * @param hrng RNG handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RNG_UnRegisterReadyDataCallback(RNG_HandleTypeDef *hrng) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hrng); - - if (HAL_RNG_STATE_READY == hrng->State) - { - hrng->ReadyDataCallback = HAL_RNG_ReadyDataCallback; /* Legacy weak ReadyDataCallback */ - } - else - { - /* Update the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hrng); - return status; -} - -#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @addtogroup RNG_Exported_Functions_Group2 - * @brief Peripheral Control functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Get the 32 bit Random number - (+) Get the 32 bit Random number with interrupt enabled - (+) Handle RNG interrupt request - -@endverbatim - * @{ - */ - -/** - * @brief Generates a 32-bit random number. - * @note Each time the random number data is read the RNG_FLAG_DRDY flag - * is automatically cleared. - * @param hrng pointer to a RNG_HandleTypeDef structure that contains - * the configuration information for RNG. - * @param random32bit pointer to generated random number variable if successful. - * @retval HAL status - */ - -HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random32bit) -{ - uint32_t tickstart; - HAL_StatusTypeDef status = HAL_OK; - - /* Process Locked */ - __HAL_LOCK(hrng); - - /* Check RNG peripheral state */ - if (hrng->State == HAL_RNG_STATE_READY) - { - /* Change RNG peripheral state */ - hrng->State = HAL_RNG_STATE_BUSY; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Check if data register contains valid random data */ - while (__HAL_RNG_GET_FLAG(hrng, RNG_FLAG_DRDY) == RESET) - { - if ((HAL_GetTick() - tickstart) > RNG_TIMEOUT_VALUE) - { - /* New check to avoid false timeout detection in case of preemption */ - if (__HAL_RNG_GET_FLAG(hrng, RNG_FLAG_DRDY) == RESET) - { - hrng->State = HAL_RNG_STATE_READY; - hrng->ErrorCode = HAL_RNG_ERROR_TIMEOUT; - /* Process Unlocked */ - __HAL_UNLOCK(hrng); - return HAL_ERROR; - } - } - } - - /* Get a 32bit Random number */ - hrng->RandomNumber = hrng->Instance->DR; - *random32bit = hrng->RandomNumber; - - hrng->State = HAL_RNG_STATE_READY; - } - else - { - hrng->ErrorCode = HAL_RNG_ERROR_BUSY; - status = HAL_ERROR; - } - - /* Process Unlocked */ - __HAL_UNLOCK(hrng); - - return status; -} - -/** - * @brief Generates a 32-bit random number in interrupt mode. - * @param hrng pointer to a RNG_HandleTypeDef structure that contains - * the configuration information for RNG. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber_IT(RNG_HandleTypeDef *hrng) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process Locked */ - __HAL_LOCK(hrng); - - /* Check RNG peripheral state */ - if (hrng->State == HAL_RNG_STATE_READY) - { - /* Change RNG peripheral state */ - hrng->State = HAL_RNG_STATE_BUSY; - - /* Enable the RNG Interrupts: Data Ready, Clock error, Seed error */ - __HAL_RNG_ENABLE_IT(hrng); - } - else - { - /* Process Unlocked */ - __HAL_UNLOCK(hrng); - - hrng->ErrorCode = HAL_RNG_ERROR_BUSY; - status = HAL_ERROR; - } - - return status; -} - -/** - * @brief Returns generated random number in polling mode (Obsolete) - * Use HAL_RNG_GenerateRandomNumber() API instead. - * @param hrng pointer to a RNG_HandleTypeDef structure that contains - * the configuration information for RNG. - * @retval Random value - */ -uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef *hrng) -{ - if (HAL_RNG_GenerateRandomNumber(hrng, &(hrng->RandomNumber)) == HAL_OK) - { - return hrng->RandomNumber; - } - else - { - return 0U; - } -} - -/** - * @brief Returns a 32-bit random number with interrupt enabled (Obsolete), - * Use HAL_RNG_GenerateRandomNumber_IT() API instead. - * @param hrng pointer to a RNG_HandleTypeDef structure that contains - * the configuration information for RNG. - * @retval 32-bit random number - */ -uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef *hrng) -{ - uint32_t random32bit = 0U; - - /* Process locked */ - __HAL_LOCK(hrng); - - /* Change RNG peripheral state */ - hrng->State = HAL_RNG_STATE_BUSY; - - /* Get a 32bit Random number */ - random32bit = hrng->Instance->DR; - - /* Enable the RNG Interrupts: Data Ready, Clock error, Seed error */ - __HAL_RNG_ENABLE_IT(hrng); - - /* Return the 32 bit random number */ - return random32bit; -} - -/** - * @brief Handles RNG interrupt request. - * @note In the case of a clock error, the RNG is no more able to generate - * random numbers because the PLL48CLK clock is not correct. User has - * to check that the clock controller is correctly configured to provide - * the RNG clock and clear the CEIS bit using __HAL_RNG_CLEAR_IT(). - * The clock error has no impact on the previously generated - * random numbers, and the RNG_DR register contents can be used. - * @note In the case of a seed error, the generation of random numbers is - * interrupted as long as the SECS bit is '1'. If a number is - * available in the RNG_DR register, it must not be used because it may - * not have enough entropy. In this case, it is recommended to clear the - * SEIS bit using __HAL_RNG_CLEAR_IT(), then disable and enable - * the RNG peripheral to reinitialize and restart the RNG. - * @note User-written HAL_RNG_ErrorCallback() API is called once whether SEIS - * or CEIS are set. - * @param hrng pointer to a RNG_HandleTypeDef structure that contains - * the configuration information for RNG. - * @retval None - - */ -void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng) -{ - uint32_t rngclockerror = 0U; - - /* RNG clock error interrupt occurred */ - if (__HAL_RNG_GET_IT(hrng, RNG_IT_CEI) != RESET) - { - /* Update the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_CLOCK; - rngclockerror = 1U; - } - else if (__HAL_RNG_GET_IT(hrng, RNG_IT_SEI) != RESET) - { - /* Update the error code */ - hrng->ErrorCode = HAL_RNG_ERROR_SEED; - rngclockerror = 1U; - } - else - { - /* Nothing to do */ - } - - if (rngclockerror == 1U) - { - /* Change RNG peripheral state */ - hrng->State = HAL_RNG_STATE_ERROR; - -#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) - /* Call registered Error callback */ - hrng->ErrorCallback(hrng); -#else - /* Call legacy weak Error callback */ - HAL_RNG_ErrorCallback(hrng); -#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ - - /* Clear the clock error flag */ - __HAL_RNG_CLEAR_IT(hrng, RNG_IT_CEI | RNG_IT_SEI); - - return; - } - - /* Check RNG data ready interrupt occurred */ - if (__HAL_RNG_GET_IT(hrng, RNG_IT_DRDY) != RESET) - { - /* Generate random number once, so disable the IT */ - __HAL_RNG_DISABLE_IT(hrng); - - /* Get the 32bit Random number (DRDY flag automatically cleared) */ - hrng->RandomNumber = hrng->Instance->DR; - - if (hrng->State != HAL_RNG_STATE_ERROR) - { - /* Change RNG peripheral state */ - hrng->State = HAL_RNG_STATE_READY; - /* Process Unlocked */ - __HAL_UNLOCK(hrng); - -#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) - /* Call registered Data Ready callback */ - hrng->ReadyDataCallback(hrng, hrng->RandomNumber); -#else - /* Call legacy weak Data Ready callback */ - HAL_RNG_ReadyDataCallback(hrng, hrng->RandomNumber); -#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ - } - } -} - -/** - * @brief Read latest generated random number. - * @param hrng pointer to a RNG_HandleTypeDef structure that contains - * the configuration information for RNG. - * @retval random value - */ -uint32_t HAL_RNG_ReadLastRandomNumber(RNG_HandleTypeDef *hrng) -{ - return (hrng->RandomNumber); -} - -/** - * @brief Data Ready callback in non-blocking mode. - * @param hrng pointer to a RNG_HandleTypeDef structure that contains - * the configuration information for RNG. - * @param random32bit generated random number. - * @retval None - */ -__weak void HAL_RNG_ReadyDataCallback(RNG_HandleTypeDef *hrng, uint32_t random32bit) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hrng); - UNUSED(random32bit); - /* NOTE : This function should not be modified. When the callback is needed, - function HAL_RNG_ReadyDataCallback must be implemented in the user file. - */ -} - -/** - * @brief RNG error callbacks. - * @param hrng pointer to a RNG_HandleTypeDef structure that contains - * the configuration information for RNG. - * @retval None - */ -__weak void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hrng); - /* NOTE : This function should not be modified. When the callback is needed, - function HAL_RNG_ErrorCallback must be implemented in the user file. - */ -} -/** - * @} - */ - - -/** @addtogroup RNG_Exported_Functions_Group3 - * @brief Peripheral State functions - * -@verbatim - =============================================================================== - ##### Peripheral State functions ##### - =============================================================================== - [..] - This subsection permits to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Returns the RNG state. - * @param hrng pointer to a RNG_HandleTypeDef structure that contains - * the configuration information for RNG. - * @retval HAL state - */ -HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng) -{ - return hrng->State; -} - -/** - * @brief Return the RNG handle error code. - * @param hrng: pointer to a RNG_HandleTypeDef structure. - * @retval RNG Error Code - */ -uint32_t HAL_RNG_GetError(RNG_HandleTypeDef *hrng) -{ - /* Return RNG Error Code */ - return hrng->ErrorCode; -} -/** - * @} - */ - -/** - * @} - */ - - -#endif /* HAL_RNG_MODULE_ENABLED */ -/** - * @} - */ - -#endif /* RNG */ - -/** - * @} - */ - +/** + ****************************************************************************** + * @file stm32f4xx_hal_rng.c + * @author MCD Application Team + * @brief RNG HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Random Number Generator (RNG) peripheral: + * + Initialization and configuration functions + * + Peripheral Control functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The RNG HAL driver can be used as follows: + + (#) Enable the RNG controller clock using __HAL_RCC_RNG_CLK_ENABLE() macro + in HAL_RNG_MspInit(). + (#) Activate the RNG peripheral using HAL_RNG_Init() function. + (#) Wait until the 32 bit Random Number Generator contains a valid + random data using (polling/interrupt) mode. + (#) Get the 32 bit random number using HAL_RNG_GenerateRandomNumber() function. + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_RNG_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function HAL_RNG_RegisterCallback() to register a user callback. + Function HAL_RNG_RegisterCallback() allows to register following callbacks: + (+) ErrorCallback : RNG Error Callback. + (+) MspInitCallback : RNG MspInit. + (+) MspDeInitCallback : RNG MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_RNG_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. + HAL_RNG_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) ErrorCallback : RNG Error Callback. + (+) MspInitCallback : RNG MspInit. + (+) MspDeInitCallback : RNG MspDeInit. + + [..] + For specific callback ReadyDataCallback, use dedicated register callbacks: + respectively HAL_RNG_RegisterReadyDataCallback() , HAL_RNG_UnRegisterReadyDataCallback(). + + [..] + By default, after the HAL_RNG_Init() and when the state is HAL_RNG_STATE_RESET + all callbacks are set to the corresponding weak (surcharged) functions: + example HAL_RNG_ErrorCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak (surcharged) functions in the HAL_RNG_Init() + and HAL_RNG_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_RNG_Init() and HAL_RNG_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_RNG_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_RNG_STATE_READY or HAL_RNG_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_RNG_RegisterCallback() before calling HAL_RNG_DeInit() + or HAL_RNG_Init() function. + + [..] + When The compilation define USE_HAL_RNG_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak (surcharged) callbacks are used. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +#if defined (RNG) + +/** @addtogroup RNG + * @brief RNG HAL module driver. + * @{ + */ + +#ifdef HAL_RNG_MODULE_ENABLED + +/* Private types -------------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RNG_Private_Constants RNG Private Constants + * @{ + */ +#define RNG_TIMEOUT_VALUE 2U +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/* Private functions prototypes ----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup RNG_Exported_Functions + * @{ + */ + +/** @addtogroup RNG_Exported_Functions_Group1 + * @brief Initialization and configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the RNG according to the specified parameters + in the RNG_InitTypeDef and create the associated handle + (+) DeInitialize the RNG peripheral + (+) Initialize the RNG MSP + (+) DeInitialize RNG MSP + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the RNG peripheral and creates the associated handle. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng) +{ + /* Check the RNG handle allocation */ + if (hrng == NULL) + { + return HAL_ERROR; + } + /* Check the parameters */ + assert_param(IS_RNG_ALL_INSTANCE(hrng->Instance)); + +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) + if (hrng->State == HAL_RNG_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hrng->Lock = HAL_UNLOCKED; + + hrng->ReadyDataCallback = HAL_RNG_ReadyDataCallback; /* Legacy weak ReadyDataCallback */ + hrng->ErrorCallback = HAL_RNG_ErrorCallback; /* Legacy weak ErrorCallback */ + + if (hrng->MspInitCallback == NULL) + { + hrng->MspInitCallback = HAL_RNG_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware */ + hrng->MspInitCallback(hrng); + } +#else + if (hrng->State == HAL_RNG_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hrng->Lock = HAL_UNLOCKED; + + /* Init the low level hardware */ + HAL_RNG_MspInit(hrng); + } +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + + /* Change RNG peripheral state */ + hrng->State = HAL_RNG_STATE_BUSY; + + + /* Enable the RNG Peripheral */ + __HAL_RNG_ENABLE(hrng); + + /* Initialize the RNG state */ + hrng->State = HAL_RNG_STATE_READY; + + /* Initialise the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_NONE; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief DeInitializes the RNG peripheral. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNG_DeInit(RNG_HandleTypeDef *hrng) +{ + /* Check the RNG handle allocation */ + if (hrng == NULL) + { + return HAL_ERROR; + } + + /* Disable the RNG Peripheral */ + CLEAR_BIT(hrng->Instance->CR, RNG_CR_IE | RNG_CR_RNGEN); + + /* Clear RNG interrupt status flags */ + CLEAR_BIT(hrng->Instance->SR, RNG_SR_CEIS | RNG_SR_SEIS); + +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) + if (hrng->MspDeInitCallback == NULL) + { + hrng->MspDeInitCallback = HAL_RNG_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware */ + hrng->MspDeInitCallback(hrng); +#else + /* DeInit the low level hardware */ + HAL_RNG_MspDeInit(hrng); +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + + /* Update the RNG state */ + hrng->State = HAL_RNG_STATE_RESET; + + /* Initialise the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_NONE; + + /* Release Lock */ + __HAL_UNLOCK(hrng); + + /* Return the function status */ + return HAL_OK; +} + +/** + * @brief Initializes the RNG MSP. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval None + */ +__weak void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrng); + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_RNG_MspInit must be implemented in the user file. + */ +} + +/** + * @brief DeInitializes the RNG MSP. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval None + */ +__weak void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrng); + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_RNG_MspDeInit must be implemented in the user file. + */ +} + +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User RNG Callback + * To be used instead of the weak predefined callback + * @param hrng RNG handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_RNG_ERROR_CB_ID Error callback ID + * @arg @ref HAL_RNG_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_RNG_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID, + pRNG_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hrng); + + if (HAL_RNG_STATE_READY == hrng->State) + { + switch (CallbackID) + { + case HAL_RNG_ERROR_CB_ID : + hrng->ErrorCallback = pCallback; + break; + + case HAL_RNG_MSPINIT_CB_ID : + hrng->MspInitCallback = pCallback; + break; + + case HAL_RNG_MSPDEINIT_CB_ID : + hrng->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_RNG_STATE_RESET == hrng->State) + { + switch (CallbackID) + { + case HAL_RNG_MSPINIT_CB_ID : + hrng->MspInitCallback = pCallback; + break; + + case HAL_RNG_MSPDEINIT_CB_ID : + hrng->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hrng); + return status; +} + +/** + * @brief Unregister an RNG Callback + * RNG callback is redirected to the weak predefined callback + * @param hrng RNG handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_RNG_ERROR_CB_ID Error callback ID + * @arg @ref HAL_RNG_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_RNG_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNG_UnRegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hrng); + + if (HAL_RNG_STATE_READY == hrng->State) + { + switch (CallbackID) + { + case HAL_RNG_ERROR_CB_ID : + hrng->ErrorCallback = HAL_RNG_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_RNG_MSPINIT_CB_ID : + hrng->MspInitCallback = HAL_RNG_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_RNG_MSPDEINIT_CB_ID : + hrng->MspDeInitCallback = HAL_RNG_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_RNG_STATE_RESET == hrng->State) + { + switch (CallbackID) + { + case HAL_RNG_MSPINIT_CB_ID : + hrng->MspInitCallback = HAL_RNG_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_RNG_MSPDEINIT_CB_ID : + hrng->MspDeInitCallback = HAL_RNG_MspDeInit; /* Legacy weak MspInit */ + break; + + default : + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hrng); + return status; +} + +/** + * @brief Register Data Ready RNG Callback + * To be used instead of the weak HAL_RNG_ReadyDataCallback() predefined callback + * @param hrng RNG handle + * @param pCallback pointer to the Data Ready Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNG_RegisterReadyDataCallback(RNG_HandleTypeDef *hrng, pRNG_ReadyDataCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hrng); + + if (HAL_RNG_STATE_READY == hrng->State) + { + hrng->ReadyDataCallback = pCallback; + } + else + { + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hrng); + return status; +} + +/** + * @brief UnRegister the Data Ready RNG Callback + * Data Ready RNG Callback is redirected to the weak HAL_RNG_ReadyDataCallback() predefined callback + * @param hrng RNG handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNG_UnRegisterReadyDataCallback(RNG_HandleTypeDef *hrng) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hrng); + + if (HAL_RNG_STATE_READY == hrng->State) + { + hrng->ReadyDataCallback = HAL_RNG_ReadyDataCallback; /* Legacy weak ReadyDataCallback */ + } + else + { + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hrng); + return status; +} + +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup RNG_Exported_Functions_Group2 + * @brief Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Get the 32 bit Random number + (+) Get the 32 bit Random number with interrupt enabled + (+) Handle RNG interrupt request + +@endverbatim + * @{ + */ + +/** + * @brief Generates a 32-bit random number. + * @note Each time the random number data is read the RNG_FLAG_DRDY flag + * is automatically cleared. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @param random32bit pointer to generated random number variable if successful. + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random32bit) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(hrng); + + /* Check RNG peripheral state */ + if (hrng->State == HAL_RNG_STATE_READY) + { + /* Change RNG peripheral state */ + hrng->State = HAL_RNG_STATE_BUSY; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Check if data register contains valid random data */ + while (__HAL_RNG_GET_FLAG(hrng, RNG_FLAG_DRDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > RNG_TIMEOUT_VALUE) + { + /* New check to avoid false timeout detection in case of preemption */ + if (__HAL_RNG_GET_FLAG(hrng, RNG_FLAG_DRDY) == RESET) + { + hrng->State = HAL_RNG_STATE_READY; + hrng->ErrorCode = HAL_RNG_ERROR_TIMEOUT; + /* Process Unlocked */ + __HAL_UNLOCK(hrng); + return HAL_ERROR; + } + } + } + + /* Get a 32bit Random number */ + hrng->RandomNumber = hrng->Instance->DR; + *random32bit = hrng->RandomNumber; + + hrng->State = HAL_RNG_STATE_READY; + } + else + { + hrng->ErrorCode = HAL_RNG_ERROR_BUSY; + status = HAL_ERROR; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hrng); + + return status; +} + +/** + * @brief Generates a 32-bit random number in interrupt mode. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber_IT(RNG_HandleTypeDef *hrng) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(hrng); + + /* Check RNG peripheral state */ + if (hrng->State == HAL_RNG_STATE_READY) + { + /* Change RNG peripheral state */ + hrng->State = HAL_RNG_STATE_BUSY; + + /* Enable the RNG Interrupts: Data Ready, Clock error, Seed error */ + __HAL_RNG_ENABLE_IT(hrng); + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hrng); + + hrng->ErrorCode = HAL_RNG_ERROR_BUSY; + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Returns generated random number in polling mode (Obsolete) + * Use HAL_RNG_GenerateRandomNumber() API instead. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval Random value + */ +uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef *hrng) +{ + if (HAL_RNG_GenerateRandomNumber(hrng, &(hrng->RandomNumber)) == HAL_OK) + { + return hrng->RandomNumber; + } + else + { + return 0U; + } +} + +/** + * @brief Returns a 32-bit random number with interrupt enabled (Obsolete), + * Use HAL_RNG_GenerateRandomNumber_IT() API instead. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval 32-bit random number + */ +uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef *hrng) +{ + uint32_t random32bit = 0U; + + /* Process locked */ + __HAL_LOCK(hrng); + + /* Change RNG peripheral state */ + hrng->State = HAL_RNG_STATE_BUSY; + + /* Get a 32bit Random number */ + random32bit = hrng->Instance->DR; + + /* Enable the RNG Interrupts: Data Ready, Clock error, Seed error */ + __HAL_RNG_ENABLE_IT(hrng); + + /* Return the 32 bit random number */ + return random32bit; +} + +/** + * @brief Handles RNG interrupt request. + * @note In the case of a clock error, the RNG is no more able to generate + * random numbers because the PLL48CLK clock is not correct. User has + * to check that the clock controller is correctly configured to provide + * the RNG clock and clear the CEIS bit using __HAL_RNG_CLEAR_IT(). + * The clock error has no impact on the previously generated + * random numbers, and the RNG_DR register contents can be used. + * @note In the case of a seed error, the generation of random numbers is + * interrupted as long as the SECS bit is '1'. If a number is + * available in the RNG_DR register, it must not be used because it may + * not have enough entropy. In this case, it is recommended to clear the + * SEIS bit using __HAL_RNG_CLEAR_IT(), then disable and enable + * the RNG peripheral to reinitialize and restart the RNG. + * @note User-written HAL_RNG_ErrorCallback() API is called once whether SEIS + * or CEIS are set. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval None + + */ +void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng) +{ + uint32_t rngclockerror = 0U; + + /* RNG clock error interrupt occurred */ + if (__HAL_RNG_GET_IT(hrng, RNG_IT_CEI) != RESET) + { + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_CLOCK; + rngclockerror = 1U; + } + else if (__HAL_RNG_GET_IT(hrng, RNG_IT_SEI) != RESET) + { + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_SEED; + rngclockerror = 1U; + } + else + { + /* Nothing to do */ + } + + if (rngclockerror == 1U) + { + /* Change RNG peripheral state */ + hrng->State = HAL_RNG_STATE_ERROR; + +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) + /* Call registered Error callback */ + hrng->ErrorCallback(hrng); +#else + /* Call legacy weak Error callback */ + HAL_RNG_ErrorCallback(hrng); +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + + /* Clear the clock error flag */ + __HAL_RNG_CLEAR_IT(hrng, RNG_IT_CEI | RNG_IT_SEI); + + return; + } + + /* Check RNG data ready interrupt occurred */ + if (__HAL_RNG_GET_IT(hrng, RNG_IT_DRDY) != RESET) + { + /* Generate random number once, so disable the IT */ + __HAL_RNG_DISABLE_IT(hrng); + + /* Get the 32bit Random number (DRDY flag automatically cleared) */ + hrng->RandomNumber = hrng->Instance->DR; + + if (hrng->State != HAL_RNG_STATE_ERROR) + { + /* Change RNG peripheral state */ + hrng->State = HAL_RNG_STATE_READY; + /* Process Unlocked */ + __HAL_UNLOCK(hrng); + +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) + /* Call registered Data Ready callback */ + hrng->ReadyDataCallback(hrng, hrng->RandomNumber); +#else + /* Call legacy weak Data Ready callback */ + HAL_RNG_ReadyDataCallback(hrng, hrng->RandomNumber); +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief Read latest generated random number. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval random value + */ +uint32_t HAL_RNG_ReadLastRandomNumber(RNG_HandleTypeDef *hrng) +{ + return (hrng->RandomNumber); +} + +/** + * @brief Data Ready callback in non-blocking mode. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @param random32bit generated random number. + * @retval None + */ +__weak void HAL_RNG_ReadyDataCallback(RNG_HandleTypeDef *hrng, uint32_t random32bit) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrng); + UNUSED(random32bit); + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_RNG_ReadyDataCallback must be implemented in the user file. + */ +} + +/** + * @brief RNG error callbacks. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval None + */ +__weak void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrng); + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_RNG_ErrorCallback must be implemented in the user file. + */ +} +/** + * @} + */ + + +/** @addtogroup RNG_Exported_Functions_Group3 + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the RNG state. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval HAL state + */ +HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng) +{ + return hrng->State; +} + +/** + * @brief Return the RNG handle error code. + * @param hrng: pointer to a RNG_HandleTypeDef structure. + * @retval RNG Error Code + */ +uint32_t HAL_RNG_GetError(RNG_HandleTypeDef *hrng) +{ + /* Return RNG Error Code */ + return hrng->ErrorCode; +} +/** + * @} + */ + +/** + * @} + */ + + +#endif /* HAL_RNG_MODULE_ENABLED */ +/** + * @} + */ + +#endif /* RNG */ + +/** + * @} + */ + diff --git a/Drivers/stm32f4xx_hal_rng.h b/libs/hal/stm32f4xx_hal_rng.h similarity index 97% rename from Drivers/stm32f4xx_hal_rng.h rename to libs/hal/stm32f4xx_hal_rng.h index fe0a911..7d4dca1 100644 --- a/Drivers/stm32f4xx_hal_rng.h +++ b/libs/hal/stm32f4xx_hal_rng.h @@ -1,361 +1,361 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_rng.h - * @author MCD Application Team - * @brief Header file of RNG HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_RNG_H -#define STM32F4xx_HAL_RNG_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -#if defined (RNG) - -/** @defgroup RNG RNG - * @brief RNG HAL module driver - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup RNG_Exported_Types RNG Exported Types - * @{ - */ - -/** @defgroup RNG_Exported_Types_Group1 RNG Init Structure definition - * @{ - */ - -/** - * @} - */ - -/** @defgroup RNG_Exported_Types_Group2 RNG State Structure definition - * @{ - */ -typedef enum -{ - HAL_RNG_STATE_RESET = 0x00U, /*!< RNG not yet initialized or disabled */ - HAL_RNG_STATE_READY = 0x01U, /*!< RNG initialized and ready for use */ - HAL_RNG_STATE_BUSY = 0x02U, /*!< RNG internal process is ongoing */ - HAL_RNG_STATE_TIMEOUT = 0x03U, /*!< RNG timeout state */ - HAL_RNG_STATE_ERROR = 0x04U /*!< RNG error state */ - -} HAL_RNG_StateTypeDef; - -/** - * @} - */ - -/** @defgroup RNG_Exported_Types_Group3 RNG Handle Structure definition - * @{ - */ -#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) -typedef struct __RNG_HandleTypeDef -#else -typedef struct -#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ -{ - RNG_TypeDef *Instance; /*!< Register base address */ - - HAL_LockTypeDef Lock; /*!< RNG locking object */ - - __IO HAL_RNG_StateTypeDef State; /*!< RNG communication state */ - - __IO uint32_t ErrorCode; /*!< RNG Error code */ - - uint32_t RandomNumber; /*!< Last Generated RNG Data */ - -#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) - void (* ReadyDataCallback)(struct __RNG_HandleTypeDef *hrng, uint32_t random32bit); /*!< RNG Data Ready Callback */ - void (* ErrorCallback)(struct __RNG_HandleTypeDef *hrng); /*!< RNG Error Callback */ - - void (* MspInitCallback)(struct __RNG_HandleTypeDef *hrng); /*!< RNG Msp Init callback */ - void (* MspDeInitCallback)(struct __RNG_HandleTypeDef *hrng); /*!< RNG Msp DeInit callback */ -#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ - -} RNG_HandleTypeDef; - -#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) -/** - * @brief HAL RNG Callback ID enumeration definition - */ -typedef enum -{ - HAL_RNG_ERROR_CB_ID = 0x00U, /*!< RNG Error Callback ID */ - - HAL_RNG_MSPINIT_CB_ID = 0x01U, /*!< RNG MspInit callback ID */ - HAL_RNG_MSPDEINIT_CB_ID = 0x02U /*!< RNG MspDeInit callback ID */ - -} HAL_RNG_CallbackIDTypeDef; - -/** - * @brief HAL RNG Callback pointer definition - */ -typedef void (*pRNG_CallbackTypeDef)(RNG_HandleTypeDef *hrng); /*!< pointer to a common RNG callback function */ -typedef void (*pRNG_ReadyDataCallbackTypeDef)(RNG_HandleTypeDef *hrng, uint32_t random32bit); /*!< pointer to an RNG Data Ready specific callback function */ - -#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup RNG_Exported_Constants RNG Exported Constants - * @{ - */ - -/** @defgroup RNG_Exported_Constants_Group1 RNG Interrupt definition - * @{ - */ -#define RNG_IT_DRDY RNG_SR_DRDY /*!< Data Ready interrupt */ -#define RNG_IT_CEI RNG_SR_CEIS /*!< Clock error interrupt */ -#define RNG_IT_SEI RNG_SR_SEIS /*!< Seed error interrupt */ -/** - * @} - */ - -/** @defgroup RNG_Exported_Constants_Group2 RNG Flag definition - * @{ - */ -#define RNG_FLAG_DRDY RNG_SR_DRDY /*!< Data ready */ -#define RNG_FLAG_CECS RNG_SR_CECS /*!< Clock error current status */ -#define RNG_FLAG_SECS RNG_SR_SECS /*!< Seed error current status */ -/** - * @} - */ - -/** @defgroup RNG_Error_Definition RNG Error Definition - * @{ - */ -#define HAL_RNG_ERROR_NONE 0x00000000U /*!< No error */ -#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) -#define HAL_RNG_ERROR_INVALID_CALLBACK 0x00000001U /*!< Invalid Callback error */ -#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ -#define HAL_RNG_ERROR_TIMEOUT 0x00000002U /*!< Timeout error */ -#define HAL_RNG_ERROR_BUSY 0x00000004U /*!< Busy error */ -#define HAL_RNG_ERROR_SEED 0x00000008U /*!< Seed error */ -#define HAL_RNG_ERROR_CLOCK 0x00000010U /*!< Clock error */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup RNG_Exported_Macros RNG Exported Macros - * @{ - */ - -/** @brief Reset RNG handle state - * @param __HANDLE__ RNG Handle - * @retval None - */ -#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) -#define __HAL_RNG_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->State = HAL_RNG_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0U) -#else -#define __HAL_RNG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RNG_STATE_RESET) -#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ - -/** - * @brief Enables the RNG peripheral. - * @param __HANDLE__ RNG Handle - * @retval None - */ -#define __HAL_RNG_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_RNGEN) - -/** - * @brief Disables the RNG peripheral. - * @param __HANDLE__ RNG Handle - * @retval None - */ -#define __HAL_RNG_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_RNGEN) - -/** - * @brief Check the selected RNG flag status. - * @param __HANDLE__ RNG Handle - * @param __FLAG__ RNG flag - * This parameter can be one of the following values: - * @arg RNG_FLAG_DRDY: Data ready - * @arg RNG_FLAG_CECS: Clock error current status - * @arg RNG_FLAG_SECS: Seed error current status - * @retval The new state of __FLAG__ (SET or RESET). - */ -#define __HAL_RNG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) - -/** - * @brief Clears the selected RNG flag status. - * @param __HANDLE__ RNG handle - * @param __FLAG__ RNG flag to clear - * @note WARNING: This is a dummy macro for HAL code alignment, - * flags RNG_FLAG_DRDY, RNG_FLAG_CECS and RNG_FLAG_SECS are read-only. - * @retval None - */ -#define __HAL_RNG_CLEAR_FLAG(__HANDLE__, __FLAG__) /* dummy macro */ - -/** - * @brief Enables the RNG interrupts. - * @param __HANDLE__ RNG Handle - * @retval None - */ -#define __HAL_RNG_ENABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_IE) - -/** - * @brief Disables the RNG interrupts. - * @param __HANDLE__ RNG Handle - * @retval None - */ -#define __HAL_RNG_DISABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_IE) - -/** - * @brief Checks whether the specified RNG interrupt has occurred or not. - * @param __HANDLE__ RNG Handle - * @param __INTERRUPT__ specifies the RNG interrupt status flag to check. - * This parameter can be one of the following values: - * @arg RNG_IT_DRDY: Data ready interrupt - * @arg RNG_IT_CEI: Clock error interrupt - * @arg RNG_IT_SEI: Seed error interrupt - * @retval The new state of __INTERRUPT__ (SET or RESET). - */ -#define __HAL_RNG_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR & (__INTERRUPT__)) == (__INTERRUPT__)) - -/** - * @brief Clear the RNG interrupt status flags. - * @param __HANDLE__ RNG Handle - * @param __INTERRUPT__ specifies the RNG interrupt status flag to clear. - * This parameter can be one of the following values: - * @arg RNG_IT_CEI: Clock error interrupt - * @arg RNG_IT_SEI: Seed error interrupt - * @note RNG_IT_DRDY flag is read-only, reading RNG_DR register automatically clears RNG_IT_DRDY. - * @retval None - */ -#define __HAL_RNG_CLEAR_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR) = ~(__INTERRUPT__)) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup RNG_Exported_Functions RNG Exported Functions - * @{ - */ - -/** @defgroup RNG_Exported_Functions_Group1 Initialization and configuration functions - * @{ - */ -HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng); -HAL_StatusTypeDef HAL_RNG_DeInit(RNG_HandleTypeDef *hrng); -void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng); -void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng); - -/* Callbacks Register/UnRegister functions ***********************************/ -#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID, - pRNG_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_RNG_UnRegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID); - -HAL_StatusTypeDef HAL_RNG_RegisterReadyDataCallback(RNG_HandleTypeDef *hrng, pRNG_ReadyDataCallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_RNG_UnRegisterReadyDataCallback(RNG_HandleTypeDef *hrng); -#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup RNG_Exported_Functions_Group2 Peripheral Control functions - * @{ - */ -uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef - *hrng); /* Obsolete, use HAL_RNG_GenerateRandomNumber() instead */ -uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef - *hrng); /* Obsolete, use HAL_RNG_GenerateRandomNumber_IT() instead */ -HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random32bit); -HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber_IT(RNG_HandleTypeDef *hrng); -uint32_t HAL_RNG_ReadLastRandomNumber(RNG_HandleTypeDef *hrng); - -void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng); -void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng); -void HAL_RNG_ReadyDataCallback(RNG_HandleTypeDef *hrng, uint32_t random32bit); - -/** - * @} - */ - -/** @defgroup RNG_Exported_Functions_Group3 Peripheral State functions - * @{ - */ -HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng); -uint32_t HAL_RNG_GetError(RNG_HandleTypeDef *hrng); -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup RNG_Private_Macros RNG Private Macros - * @{ - */ -#define IS_RNG_IT(IT) (((IT) == RNG_IT_CEI) || \ - ((IT) == RNG_IT_SEI)) - -#define IS_RNG_FLAG(FLAG) (((FLAG) == RNG_FLAG_DRDY) || \ - ((FLAG) == RNG_FLAG_CECS) || \ - ((FLAG) == RNG_FLAG_SECS)) - -/** - * @} - */ - -/** - * @} - */ - -#endif /* RNG */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* STM32F4xx_HAL_RNG_H */ - +/** + ****************************************************************************** + * @file stm32f4xx_hal_rng.h + * @author MCD Application Team + * @brief Header file of RNG HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F4xx_HAL_RNG_H +#define STM32F4xx_HAL_RNG_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +#if defined (RNG) + +/** @defgroup RNG RNG + * @brief RNG HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RNG_Exported_Types RNG Exported Types + * @{ + */ + +/** @defgroup RNG_Exported_Types_Group1 RNG Init Structure definition + * @{ + */ + +/** + * @} + */ + +/** @defgroup RNG_Exported_Types_Group2 RNG State Structure definition + * @{ + */ +typedef enum +{ + HAL_RNG_STATE_RESET = 0x00U, /*!< RNG not yet initialized or disabled */ + HAL_RNG_STATE_READY = 0x01U, /*!< RNG initialized and ready for use */ + HAL_RNG_STATE_BUSY = 0x02U, /*!< RNG internal process is ongoing */ + HAL_RNG_STATE_TIMEOUT = 0x03U, /*!< RNG timeout state */ + HAL_RNG_STATE_ERROR = 0x04U /*!< RNG error state */ + +} HAL_RNG_StateTypeDef; + +/** + * @} + */ + +/** @defgroup RNG_Exported_Types_Group3 RNG Handle Structure definition + * @{ + */ +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) +typedef struct __RNG_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ +{ + RNG_TypeDef *Instance; /*!< Register base address */ + + HAL_LockTypeDef Lock; /*!< RNG locking object */ + + __IO HAL_RNG_StateTypeDef State; /*!< RNG communication state */ + + __IO uint32_t ErrorCode; /*!< RNG Error code */ + + uint32_t RandomNumber; /*!< Last Generated RNG Data */ + +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) + void (* ReadyDataCallback)(struct __RNG_HandleTypeDef *hrng, uint32_t random32bit); /*!< RNG Data Ready Callback */ + void (* ErrorCallback)(struct __RNG_HandleTypeDef *hrng); /*!< RNG Error Callback */ + + void (* MspInitCallback)(struct __RNG_HandleTypeDef *hrng); /*!< RNG Msp Init callback */ + void (* MspDeInitCallback)(struct __RNG_HandleTypeDef *hrng); /*!< RNG Msp DeInit callback */ +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + +} RNG_HandleTypeDef; + +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) +/** + * @brief HAL RNG Callback ID enumeration definition + */ +typedef enum +{ + HAL_RNG_ERROR_CB_ID = 0x00U, /*!< RNG Error Callback ID */ + + HAL_RNG_MSPINIT_CB_ID = 0x01U, /*!< RNG MspInit callback ID */ + HAL_RNG_MSPDEINIT_CB_ID = 0x02U /*!< RNG MspDeInit callback ID */ + +} HAL_RNG_CallbackIDTypeDef; + +/** + * @brief HAL RNG Callback pointer definition + */ +typedef void (*pRNG_CallbackTypeDef)(RNG_HandleTypeDef *hrng); /*!< pointer to a common RNG callback function */ +typedef void (*pRNG_ReadyDataCallbackTypeDef)(RNG_HandleTypeDef *hrng, uint32_t random32bit); /*!< pointer to an RNG Data Ready specific callback function */ + +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RNG_Exported_Constants RNG Exported Constants + * @{ + */ + +/** @defgroup RNG_Exported_Constants_Group1 RNG Interrupt definition + * @{ + */ +#define RNG_IT_DRDY RNG_SR_DRDY /*!< Data Ready interrupt */ +#define RNG_IT_CEI RNG_SR_CEIS /*!< Clock error interrupt */ +#define RNG_IT_SEI RNG_SR_SEIS /*!< Seed error interrupt */ +/** + * @} + */ + +/** @defgroup RNG_Exported_Constants_Group2 RNG Flag definition + * @{ + */ +#define RNG_FLAG_DRDY RNG_SR_DRDY /*!< Data ready */ +#define RNG_FLAG_CECS RNG_SR_CECS /*!< Clock error current status */ +#define RNG_FLAG_SECS RNG_SR_SECS /*!< Seed error current status */ +/** + * @} + */ + +/** @defgroup RNG_Error_Definition RNG Error Definition + * @{ + */ +#define HAL_RNG_ERROR_NONE 0x00000000U /*!< No error */ +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) +#define HAL_RNG_ERROR_INVALID_CALLBACK 0x00000001U /*!< Invalid Callback error */ +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ +#define HAL_RNG_ERROR_TIMEOUT 0x00000002U /*!< Timeout error */ +#define HAL_RNG_ERROR_BUSY 0x00000004U /*!< Busy error */ +#define HAL_RNG_ERROR_SEED 0x00000008U /*!< Seed error */ +#define HAL_RNG_ERROR_CLOCK 0x00000010U /*!< Clock error */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup RNG_Exported_Macros RNG Exported Macros + * @{ + */ + +/** @brief Reset RNG handle state + * @param __HANDLE__ RNG Handle + * @retval None + */ +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) +#define __HAL_RNG_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_RNG_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_RNG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RNG_STATE_RESET) +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + +/** + * @brief Enables the RNG peripheral. + * @param __HANDLE__ RNG Handle + * @retval None + */ +#define __HAL_RNG_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_RNGEN) + +/** + * @brief Disables the RNG peripheral. + * @param __HANDLE__ RNG Handle + * @retval None + */ +#define __HAL_RNG_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_RNGEN) + +/** + * @brief Check the selected RNG flag status. + * @param __HANDLE__ RNG Handle + * @param __FLAG__ RNG flag + * This parameter can be one of the following values: + * @arg RNG_FLAG_DRDY: Data ready + * @arg RNG_FLAG_CECS: Clock error current status + * @arg RNG_FLAG_SECS: Seed error current status + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define __HAL_RNG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clears the selected RNG flag status. + * @param __HANDLE__ RNG handle + * @param __FLAG__ RNG flag to clear + * @note WARNING: This is a dummy macro for HAL code alignment, + * flags RNG_FLAG_DRDY, RNG_FLAG_CECS and RNG_FLAG_SECS are read-only. + * @retval None + */ +#define __HAL_RNG_CLEAR_FLAG(__HANDLE__, __FLAG__) /* dummy macro */ + +/** + * @brief Enables the RNG interrupts. + * @param __HANDLE__ RNG Handle + * @retval None + */ +#define __HAL_RNG_ENABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_IE) + +/** + * @brief Disables the RNG interrupts. + * @param __HANDLE__ RNG Handle + * @retval None + */ +#define __HAL_RNG_DISABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_IE) + +/** + * @brief Checks whether the specified RNG interrupt has occurred or not. + * @param __HANDLE__ RNG Handle + * @param __INTERRUPT__ specifies the RNG interrupt status flag to check. + * This parameter can be one of the following values: + * @arg RNG_IT_DRDY: Data ready interrupt + * @arg RNG_IT_CEI: Clock error interrupt + * @arg RNG_IT_SEI: Seed error interrupt + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_RNG_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** + * @brief Clear the RNG interrupt status flags. + * @param __HANDLE__ RNG Handle + * @param __INTERRUPT__ specifies the RNG interrupt status flag to clear. + * This parameter can be one of the following values: + * @arg RNG_IT_CEI: Clock error interrupt + * @arg RNG_IT_SEI: Seed error interrupt + * @note RNG_IT_DRDY flag is read-only, reading RNG_DR register automatically clears RNG_IT_DRDY. + * @retval None + */ +#define __HAL_RNG_CLEAR_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR) = ~(__INTERRUPT__)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RNG_Exported_Functions RNG Exported Functions + * @{ + */ + +/** @defgroup RNG_Exported_Functions_Group1 Initialization and configuration functions + * @{ + */ +HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng); +HAL_StatusTypeDef HAL_RNG_DeInit(RNG_HandleTypeDef *hrng); +void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng); +void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID, + pRNG_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_RNG_UnRegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_RNG_RegisterReadyDataCallback(RNG_HandleTypeDef *hrng, pRNG_ReadyDataCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_RNG_UnRegisterReadyDataCallback(RNG_HandleTypeDef *hrng); +#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup RNG_Exported_Functions_Group2 Peripheral Control functions + * @{ + */ +uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef + *hrng); /* Obsolete, use HAL_RNG_GenerateRandomNumber() instead */ +uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef + *hrng); /* Obsolete, use HAL_RNG_GenerateRandomNumber_IT() instead */ +HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random32bit); +HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber_IT(RNG_HandleTypeDef *hrng); +uint32_t HAL_RNG_ReadLastRandomNumber(RNG_HandleTypeDef *hrng); + +void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng); +void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng); +void HAL_RNG_ReadyDataCallback(RNG_HandleTypeDef *hrng, uint32_t random32bit); + +/** + * @} + */ + +/** @defgroup RNG_Exported_Functions_Group3 Peripheral State functions + * @{ + */ +HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng); +uint32_t HAL_RNG_GetError(RNG_HandleTypeDef *hrng); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RNG_Private_Macros RNG Private Macros + * @{ + */ +#define IS_RNG_IT(IT) (((IT) == RNG_IT_CEI) || \ + ((IT) == RNG_IT_SEI)) + +#define IS_RNG_FLAG(FLAG) (((FLAG) == RNG_FLAG_DRDY) || \ + ((FLAG) == RNG_FLAG_CECS) || \ + ((FLAG) == RNG_FLAG_SECS)) + +/** + * @} + */ + +/** + * @} + */ + +#endif /* RNG */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32F4xx_HAL_RNG_H */ + diff --git a/Drivers/stm32f4xx_hal_tim.c b/libs/hal/stm32f4xx_hal_tim.c similarity index 96% rename from Drivers/stm32f4xx_hal_tim.c rename to libs/hal/stm32f4xx_hal_tim.c index eb3f5c3..1ca1781 100644 --- a/Drivers/stm32f4xx_hal_tim.c +++ b/libs/hal/stm32f4xx_hal_tim.c @@ -1,7621 +1,7621 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_tim.c - * @author MCD Application Team - * @brief TIM HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Timer (TIM) peripheral: - * + TIM Time Base Initialization - * + TIM Time Base Start - * + TIM Time Base Start Interruption - * + TIM Time Base Start DMA - * + TIM Output Compare/PWM Initialization - * + TIM Output Compare/PWM Channel Configuration - * + TIM Output Compare/PWM Start - * + TIM Output Compare/PWM Start Interruption - * + TIM Output Compare/PWM Start DMA - * + TIM Input Capture Initialization - * + TIM Input Capture Channel Configuration - * + TIM Input Capture Start - * + TIM Input Capture Start Interruption - * + TIM Input Capture Start DMA - * + TIM One Pulse Initialization - * + TIM One Pulse Channel Configuration - * + TIM One Pulse Start - * + TIM Encoder Interface Initialization - * + TIM Encoder Interface Start - * + TIM Encoder Interface Start Interruption - * + TIM Encoder Interface Start DMA - * + Commutation Event configuration with Interruption and DMA - * + TIM OCRef clear configuration - * + TIM External Clock configuration - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### TIMER Generic features ##### - ============================================================================== - [..] The Timer features include: - (#) 16-bit up, down, up/down auto-reload counter. - (#) 16-bit programmable prescaler allowing dividing (also on the fly) the - counter clock frequency either by any factor between 1 and 65536. - (#) Up to 4 independent channels for: - (++) Input Capture - (++) Output Compare - (++) PWM generation (Edge and Center-aligned Mode) - (++) One-pulse mode output - (#) Synchronization circuit to control the timer with external signals and to interconnect - several timers together. - (#) Supports incremental encoder for positioning purposes - - ##### How to use this driver ##### - ============================================================================== - [..] - (#) Initialize the TIM low level resources by implementing the following functions - depending on the selected feature: - (++) Time Base : HAL_TIM_Base_MspInit() - (++) Input Capture : HAL_TIM_IC_MspInit() - (++) Output Compare : HAL_TIM_OC_MspInit() - (++) PWM generation : HAL_TIM_PWM_MspInit() - (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit() - (++) Encoder mode output : HAL_TIM_Encoder_MspInit() - - (#) Initialize the TIM low level resources : - (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); - (##) TIM pins configuration - (+++) Enable the clock for the TIM GPIOs using the following function: - __HAL_RCC_GPIOx_CLK_ENABLE(); - (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); - - (#) The external Clock can be configured, if needed (the default clock is the - internal clock from the APBx), using the following function: - HAL_TIM_ConfigClockSource, the clock configuration should be done before - any start function. - - (#) Configure the TIM in the desired functioning mode using one of the - Initialization function of this driver: - (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base - (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an - Output Compare signal. - (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a - PWM signal. - (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an - external signal. - (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer - in One Pulse Mode. - (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface. - - (#) Activate the TIM peripheral using one of the start functions depending from the feature used: - (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT() - (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT() - (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT() - (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT() - (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT() - (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT(). - - (#) The DMA Burst is managed with the two following functions: - HAL_TIM_DMABurst_WriteStart() - HAL_TIM_DMABurst_ReadStart() - - *** Callback registration *** - ============================================= - - [..] - The compilation define USE_HAL_TIM_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - - [..] - Use Function HAL_TIM_RegisterCallback() to register a callback. - HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle, - the Callback ID and a pointer to the user callback function. - - [..] - Use function HAL_TIM_UnRegisterCallback() to reset a callback to the default - weak function. - HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle, - and the Callback ID. - - [..] - These functions allow to register/unregister following callbacks: - (+) Base_MspInitCallback : TIM Base Msp Init Callback. - (+) Base_MspDeInitCallback : TIM Base Msp DeInit Callback. - (+) IC_MspInitCallback : TIM IC Msp Init Callback. - (+) IC_MspDeInitCallback : TIM IC Msp DeInit Callback. - (+) OC_MspInitCallback : TIM OC Msp Init Callback. - (+) OC_MspDeInitCallback : TIM OC Msp DeInit Callback. - (+) PWM_MspInitCallback : TIM PWM Msp Init Callback. - (+) PWM_MspDeInitCallback : TIM PWM Msp DeInit Callback. - (+) OnePulse_MspInitCallback : TIM One Pulse Msp Init Callback. - (+) OnePulse_MspDeInitCallback : TIM One Pulse Msp DeInit Callback. - (+) Encoder_MspInitCallback : TIM Encoder Msp Init Callback. - (+) Encoder_MspDeInitCallback : TIM Encoder Msp DeInit Callback. - (+) HallSensor_MspInitCallback : TIM Hall Sensor Msp Init Callback. - (+) HallSensor_MspDeInitCallback : TIM Hall Sensor Msp DeInit Callback. - (+) PeriodElapsedCallback : TIM Period Elapsed Callback. - (+) PeriodElapsedHalfCpltCallback : TIM Period Elapsed half complete Callback. - (+) TriggerCallback : TIM Trigger Callback. - (+) TriggerHalfCpltCallback : TIM Trigger half complete Callback. - (+) IC_CaptureCallback : TIM Input Capture Callback. - (+) IC_CaptureHalfCpltCallback : TIM Input Capture half complete Callback. - (+) OC_DelayElapsedCallback : TIM Output Compare Delay Elapsed Callback. - (+) PWM_PulseFinishedCallback : TIM PWM Pulse Finished Callback. - (+) PWM_PulseFinishedHalfCpltCallback : TIM PWM Pulse Finished half complete Callback. - (+) ErrorCallback : TIM Error Callback. - (+) CommutationCallback : TIM Commutation Callback. - (+) CommutationHalfCpltCallback : TIM Commutation half complete Callback. - (+) BreakCallback : TIM Break Callback. - - [..] -By default, after the Init and when the state is HAL_TIM_STATE_RESET -all interrupt callbacks are set to the corresponding weak functions: - examples HAL_TIM_TriggerCallback(), HAL_TIM_ErrorCallback(). - - [..] - Exception done for MspInit and MspDeInit functions that are reset to the legacy weak - functionalities in the Init / DeInit only when these callbacks are null - (not registered beforehand). If not, MspInit or MspDeInit are not null, the Init / DeInit - keep and use the user MspInit / MspDeInit callbacks(registered beforehand) - - [..] - Callbacks can be registered / unregistered in HAL_TIM_STATE_READY state only. - Exception done MspInit / MspDeInit that can be registered / unregistered - in HAL_TIM_STATE_READY or HAL_TIM_STATE_RESET state, - thus registered(user) MspInit / DeInit callbacks can be used during the Init / DeInit. - In that case first register the MspInit/MspDeInit user callbacks - using HAL_TIM_RegisterCallback() before calling DeInit or Init function. - - [..] - When The compilation define USE_HAL_TIM_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registration feature is not available and all callbacks - are set to the corresponding weak functions. - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup TIM TIM - * @brief TIM HAL module driver - * @{ - */ - -#ifdef HAL_TIM_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @addtogroup TIM_Private_Functions - * @{ - */ -static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); -static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); -static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); -static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); -static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter); -static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); -static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter); -static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter); -static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource); -static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma); -static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma); -static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma); -static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma); -static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma); -static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, - TIM_SlaveConfigTypeDef *sSlaveConfig); -/** - * @} - */ -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup TIM_Exported_Functions TIM Exported Functions - * @{ - */ - -/** @defgroup TIM_Exported_Functions_Group1 TIM Time Base functions - * @brief Time Base functions - * -@verbatim - ============================================================================== - ##### Time Base functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM base. - (+) De-initialize the TIM base. - (+) Start the Time Base. - (+) Stop the Time Base. - (+) Start the Time Base and enable interrupt. - (+) Stop the Time Base and disable interrupt. - (+) Start the Time Base and enable DMA transfer. - (+) Stop the Time Base and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM Time base Unit according to the specified - * parameters in the TIM_HandleTypeDef and initialize the associated handle. - * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) - * requires a timer reset to avoid unexpected direction - * due to DIR bit readonly in center aligned mode. - * Ex: call @ref HAL_TIM_Base_DeInit() before HAL_TIM_Base_Init() - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim) -{ - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy weak callbacks */ - TIM_ResetCallback(htim); - - if (htim->Base_MspInitCallback == NULL) - { - htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->Base_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - HAL_TIM_Base_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Set the Time Base configuration */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Initialize the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - - /* Initialize the TIM channels state */ - TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM Base peripheral - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->Base_MspDeInitCallback == NULL) - { - htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; - } - /* DeInit the low level hardware */ - htim->Base_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_TIM_Base_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; - - /* Change the TIM channels state */ - TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM Base MSP. - * @param htim TIM Base handle - * @retval None - */ -__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_Base_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM Base MSP. - * @param htim TIM Base handle - * @retval None - */ -__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_Base_MspDeInit could be implemented in the user file - */ -} - - -/** - * @brief Starts the TIM Base generation. - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - /* Check the TIM state */ - if (htim->State != HAL_TIM_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Base generation. - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Base generation in interrupt mode. - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - /* Check the TIM state */ - if (htim->State != HAL_TIM_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Enable the TIM Update interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Base generation in interrupt mode. - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - /* Disable the TIM Update interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Base generation in DMA mode. - * @param htim TIM Base handle - * @param pData The source Buffer address. - * @param Length The length of data to be transferred from memory to peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); - - /* Set the TIM state */ - if (htim->State == HAL_TIM_STATE_BUSY) - { - return HAL_BUSY; - } - else if (htim->State == HAL_TIM_STATE_READY) - { - if ((pData == NULL) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - htim->State = HAL_TIM_STATE_BUSY; - } - } - else - { - return HAL_ERROR; - } - - /* Set the DMA Period elapsed callbacks */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; - htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - - /* Enable the TIM Update DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Base generation in DMA mode. - * @param htim TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); - - /* Disable the TIM Update DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE); - - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group2 TIM Output Compare functions - * @brief TIM Output Compare functions - * -@verbatim - ============================================================================== - ##### TIM Output Compare functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM Output Compare. - (+) De-initialize the TIM Output Compare. - (+) Start the TIM Output Compare. - (+) Stop the TIM Output Compare. - (+) Start the TIM Output Compare and enable interrupt. - (+) Stop the TIM Output Compare and disable interrupt. - (+) Start the TIM Output Compare and enable DMA transfer. - (+) Stop the TIM Output Compare and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM Output Compare according to the specified - * parameters in the TIM_HandleTypeDef and initializes the associated handle. - * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) - * requires a timer reset to avoid unexpected direction - * due to DIR bit readonly in center aligned mode. - * Ex: call @ref HAL_TIM_OC_DeInit() before HAL_TIM_OC_Init() - * @param htim TIM Output Compare handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim) -{ - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy weak callbacks */ - TIM_ResetCallback(htim); - - if (htim->OC_MspInitCallback == NULL) - { - htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->OC_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_OC_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Init the base time for the Output Compare */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Initialize the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - - /* Initialize the TIM channels state */ - TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM peripheral - * @param htim TIM Output Compare handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->OC_MspDeInitCallback == NULL) - { - htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; - } - /* DeInit the low level hardware */ - htim->OC_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_OC_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; - - /* Change the TIM channels state */ - TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM Output Compare MSP. - * @param htim TIM Output Compare handle - * @retval None - */ -__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_OC_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM Output Compare MSP. - * @param htim TIM Output Compare handle - * @retval None - */ -__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_OC_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the TIM Output Compare signal generation. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM channel state */ - if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Output Compare signal generation. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Disable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Output Compare signal generation in interrupt mode. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM channel state */ - if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Enable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Enable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Enable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the TIM Output Compare signal generation in interrupt mode. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} - -/** - * @brief Starts the TIM Output Compare signal generation in DMA mode. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param pData The source Buffer address. - * @param Length The length of data to be transferred from memory to TIM peripheral - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Set the TIM channel state */ - if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) - { - return HAL_BUSY; - } - else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) - { - if ((pData == NULL) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - return HAL_ERROR; - } - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - - /* Enable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - - /* Enable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 4 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Enable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the TIM Output Compare signal generation in DMA mode. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group3 TIM PWM functions - * @brief TIM PWM functions - * -@verbatim - ============================================================================== - ##### TIM PWM functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM PWM. - (+) De-initialize the TIM PWM. - (+) Start the TIM PWM. - (+) Stop the TIM PWM. - (+) Start the TIM PWM and enable interrupt. - (+) Stop the TIM PWM and disable interrupt. - (+) Start the TIM PWM and enable DMA transfer. - (+) Stop the TIM PWM and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM PWM Time Base according to the specified - * parameters in the TIM_HandleTypeDef and initializes the associated handle. - * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) - * requires a timer reset to avoid unexpected direction - * due to DIR bit readonly in center aligned mode. - * Ex: call @ref HAL_TIM_PWM_DeInit() before HAL_TIM_PWM_Init() - * @param htim TIM PWM handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim) -{ - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy weak callbacks */ - TIM_ResetCallback(htim); - - if (htim->PWM_MspInitCallback == NULL) - { - htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->PWM_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_PWM_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Init the base time for the PWM */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Initialize the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - - /* Initialize the TIM channels state */ - TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM peripheral - * @param htim TIM PWM handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->PWM_MspDeInitCallback == NULL) - { - htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; - } - /* DeInit the low level hardware */ - htim->PWM_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_PWM_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; - - /* Change the TIM channels state */ - TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM PWM MSP. - * @param htim TIM PWM handle - * @retval None - */ -__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_PWM_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM PWM MSP. - * @param htim TIM PWM handle - * @retval None - */ -__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_PWM_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the PWM signal generation. - * @param htim TIM handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM channel state */ - if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the PWM signal generation. - * @param htim TIM PWM handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Disable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the PWM signal generation in interrupt mode. - * @param htim TIM PWM handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM channel state */ - if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Enable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Enable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the PWM signal generation in interrupt mode. - * @param htim TIM PWM handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} - -/** - * @brief Starts the TIM PWM signal generation in DMA mode. - * @param htim TIM PWM handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param pData The source Buffer address. - * @param Length The length of data to be transferred from memory to TIM peripheral - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Set the TIM channel state */ - if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) - { - return HAL_BUSY; - } - else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) - { - if ((pData == NULL) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - return HAL_ERROR; - } - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - - /* Enable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Output Capture/Compare 3 request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 4 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the TIM PWM signal generation in DMA mode. - * @param htim TIM PWM handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group4 TIM Input Capture functions - * @brief TIM Input Capture functions - * -@verbatim - ============================================================================== - ##### TIM Input Capture functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM Input Capture. - (+) De-initialize the TIM Input Capture. - (+) Start the TIM Input Capture. - (+) Stop the TIM Input Capture. - (+) Start the TIM Input Capture and enable interrupt. - (+) Stop the TIM Input Capture and disable interrupt. - (+) Start the TIM Input Capture and enable DMA transfer. - (+) Stop the TIM Input Capture and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM Input Capture Time base according to the specified - * parameters in the TIM_HandleTypeDef and initializes the associated handle. - * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) - * requires a timer reset to avoid unexpected direction - * due to DIR bit readonly in center aligned mode. - * Ex: call @ref HAL_TIM_IC_DeInit() before HAL_TIM_IC_Init() - * @param htim TIM Input Capture handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim) -{ - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy weak callbacks */ - TIM_ResetCallback(htim); - - if (htim->IC_MspInitCallback == NULL) - { - htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->IC_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_IC_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Init the base time for the input capture */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Initialize the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - - /* Initialize the TIM channels state */ - TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM peripheral - * @param htim TIM Input Capture handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->IC_MspDeInitCallback == NULL) - { - htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; - } - /* DeInit the low level hardware */ - htim->IC_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_IC_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; - - /* Change the TIM channels state */ - TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM Input Capture MSP. - * @param htim TIM Input Capture handle - * @retval None - */ -__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_IC_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM Input Capture MSP. - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_IC_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the TIM Input Capture measurement. - * @param htim TIM Input Capture handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpsmcr; - HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); - HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM channel state */ - if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Input Capture measurement. - * @param htim TIM Input Capture handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Disable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Input Capture measurement in interrupt mode. - * @param htim TIM Input Capture handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); - HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM channel state */ - if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Enable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Enable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Enable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the TIM Input Capture measurement in interrupt mode. - * @param htim TIM Input Capture handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} - -/** - * @brief Starts the TIM Input Capture measurement in DMA mode. - * @param htim TIM Input Capture handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param pData The destination Buffer address. - * @param Length The length of data to be transferred from TIM peripheral to memory. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); - HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); - - /* Set the TIM channel state */ - if ((channel_state == HAL_TIM_CHANNEL_STATE_BUSY) - || (complementary_channel_state == HAL_TIM_CHANNEL_STATE_BUSY)) - { - return HAL_BUSY; - } - else if ((channel_state == HAL_TIM_CHANNEL_STATE_READY) - && (complementary_channel_state == HAL_TIM_CHANNEL_STATE_READY)) - { - if ((pData == NULL) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - return HAL_ERROR; - } - - /* Enable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); - break; - } - - case TIM_CHANNEL_4: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 4 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); - break; - } - - default: - status = HAL_ERROR; - break; - } - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the TIM Input Capture measurement in DMA mode. - * @param htim TIM Input Capture handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group5 TIM One Pulse functions - * @brief TIM One Pulse functions - * -@verbatim - ============================================================================== - ##### TIM One Pulse functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM One Pulse. - (+) De-initialize the TIM One Pulse. - (+) Start the TIM One Pulse. - (+) Stop the TIM One Pulse. - (+) Start the TIM One Pulse and enable interrupt. - (+) Stop the TIM One Pulse and disable interrupt. - (+) Start the TIM One Pulse and enable DMA transfer. - (+) Stop the TIM One Pulse and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM One Pulse Time Base according to the specified - * parameters in the TIM_HandleTypeDef and initializes the associated handle. - * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) - * requires a timer reset to avoid unexpected direction - * due to DIR bit readonly in center aligned mode. - * Ex: call @ref HAL_TIM_OnePulse_DeInit() before HAL_TIM_OnePulse_Init() - * @note When the timer instance is initialized in One Pulse mode, timer - * channels 1 and channel 2 are reserved and cannot be used for other - * purpose. - * @param htim TIM One Pulse handle - * @param OnePulseMode Select the One pulse mode. - * This parameter can be one of the following values: - * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated. - * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode) -{ - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_OPM_MODE(OnePulseMode)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy weak callbacks */ - TIM_ResetCallback(htim); - - if (htim->OnePulse_MspInitCallback == NULL) - { - htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->OnePulse_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_OnePulse_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Configure the Time base in the One Pulse Mode */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Reset the OPM Bit */ - htim->Instance->CR1 &= ~TIM_CR1_OPM; - - /* Configure the OPM Mode */ - htim->Instance->CR1 |= OnePulseMode; - - /* Initialize the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - - /* Initialize the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM One Pulse - * @param htim TIM One Pulse handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->OnePulse_MspDeInitCallback == NULL) - { - htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; - } - /* DeInit the low level hardware */ - htim->OnePulse_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_TIM_OnePulse_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM One Pulse MSP. - * @param htim TIM One Pulse handle - * @retval None - */ -__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_OnePulse_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM One Pulse MSP. - * @param htim TIM One Pulse handle - * @retval None - */ -__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the TIM One Pulse signal generation. - * @note Though OutputChannel parameter is deprecated and ignored by the function - * it has been kept to avoid HAL_TIM API compatibility break. - * @note The pulse output channel is determined when calling - * @ref HAL_TIM_OnePulse_ConfigChannel(). - * @param htim TIM One Pulse handle - * @param OutputChannel See note above - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - - /* Prevent unused argument(s) compilation warning */ - UNUSED(OutputChannel); - - /* Check the TIM channels state */ - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the Capture compare and the Input Capture channels - (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) - if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and - if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together - - No need to enable the counter, it's enabled automatically by hardware - (the counter starts in response to a stimulus and generate a pulse */ - - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM One Pulse signal generation. - * @note Though OutputChannel parameter is deprecated and ignored by the function - * it has been kept to avoid HAL_TIM API compatibility break. - * @note The pulse output channel is determined when calling - * @ref HAL_TIM_OnePulse_ConfigChannel(). - * @param htim TIM One Pulse handle - * @param OutputChannel See note above - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(OutputChannel); - - /* Disable the Capture compare and the Input Capture channels - (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) - if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and - if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ - - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM One Pulse signal generation in interrupt mode. - * @note Though OutputChannel parameter is deprecated and ignored by the function - * it has been kept to avoid HAL_TIM API compatibility break. - * @note The pulse output channel is determined when calling - * @ref HAL_TIM_OnePulse_ConfigChannel(). - * @param htim TIM One Pulse handle - * @param OutputChannel See note above - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - - /* Prevent unused argument(s) compilation warning */ - UNUSED(OutputChannel); - - /* Check the TIM channels state */ - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the Capture compare and the Input Capture channels - (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) - if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and - if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together - - No need to enable the counter, it's enabled automatically by hardware - (the counter starts in response to a stimulus and generate a pulse */ - - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM One Pulse signal generation in interrupt mode. - * @note Though OutputChannel parameter is deprecated and ignored by the function - * it has been kept to avoid HAL_TIM API compatibility break. - * @note The pulse output channel is determined when calling - * @ref HAL_TIM_OnePulse_ConfigChannel(). - * @param htim TIM One Pulse handle - * @param OutputChannel See note above - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(OutputChannel); - - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - - /* Disable the Capture compare and the Input Capture channels - (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) - if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and - if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group6 TIM Encoder functions - * @brief TIM Encoder functions - * -@verbatim - ============================================================================== - ##### TIM Encoder functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM Encoder. - (+) De-initialize the TIM Encoder. - (+) Start the TIM Encoder. - (+) Stop the TIM Encoder. - (+) Start the TIM Encoder and enable interrupt. - (+) Stop the TIM Encoder and disable interrupt. - (+) Start the TIM Encoder and enable DMA transfer. - (+) Stop the TIM Encoder and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM Encoder Interface and initialize the associated handle. - * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) - * requires a timer reset to avoid unexpected direction - * due to DIR bit readonly in center aligned mode. - * Ex: call @ref HAL_TIM_Encoder_DeInit() before HAL_TIM_Encoder_Init() - * @note Encoder mode and External clock mode 2 are not compatible and must not be selected together - * Ex: A call for @ref HAL_TIM_Encoder_Init will erase the settings of @ref HAL_TIM_ConfigClockSource - * using TIM_CLOCKSOURCE_ETRMODE2 and vice versa - * @note When the timer instance is initialized in Encoder mode, timer - * channels 1 and channel 2 are reserved and cannot be used for other - * purpose. - * @param htim TIM Encoder Interface handle - * @param sConfig TIM Encoder Interface configuration structure - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig) -{ - uint32_t tmpsmcr; - uint32_t tmpccmr1; - uint32_t tmpccer; - - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode)); - assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection)); - assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection)); - assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC1Polarity)); - assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC2Polarity)); - assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); - assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler)); - assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); - assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy weak callbacks */ - TIM_ResetCallback(htim); - - if (htim->Encoder_MspInitCallback == NULL) - { - htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->Encoder_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_Encoder_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Reset the SMS and ECE bits */ - htim->Instance->SMCR &= ~(TIM_SMCR_SMS | TIM_SMCR_ECE); - - /* Configure the Time base in the Encoder Mode */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Get the TIMx SMCR register value */ - tmpsmcr = htim->Instance->SMCR; - - /* Get the TIMx CCMR1 register value */ - tmpccmr1 = htim->Instance->CCMR1; - - /* Get the TIMx CCER register value */ - tmpccer = htim->Instance->CCER; - - /* Set the encoder Mode */ - tmpsmcr |= sConfig->EncoderMode; - - /* Select the Capture Compare 1 and the Capture Compare 2 as input */ - tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S); - tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8U)); - - /* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */ - tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC); - tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F); - tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8U); - tmpccmr1 |= (sConfig->IC1Filter << 4U) | (sConfig->IC2Filter << 12U); - - /* Set the TI1 and the TI2 Polarities */ - tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P); - tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP); - tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4U); - - /* Write to TIMx SMCR */ - htim->Instance->SMCR = tmpsmcr; - - /* Write to TIMx CCMR1 */ - htim->Instance->CCMR1 = tmpccmr1; - - /* Write to TIMx CCER */ - htim->Instance->CCER = tmpccer; - - /* Initialize the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - - -/** - * @brief DeInitializes the TIM Encoder interface - * @param htim TIM Encoder Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->Encoder_MspDeInitCallback == NULL) - { - htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; - } - /* DeInit the low level hardware */ - htim->Encoder_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_TIM_Encoder_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM Encoder Interface MSP. - * @param htim TIM Encoder Interface handle - * @retval None - */ -__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_Encoder_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM Encoder Interface MSP. - * @param htim TIM Encoder Interface handle - * @retval None - */ -__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_Encoder_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the TIM Encoder Interface. - * @param htim TIM Encoder Interface handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - - /* Check the parameters */ - assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); - - /* Set the TIM channel(s) state */ - if (Channel == TIM_CHANNEL_1) - { - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else if (Channel == TIM_CHANNEL_2) - { - if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - - /* Enable the encoder interface channels */ - switch (Channel) - { - case TIM_CHANNEL_1: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - break; - } - - case TIM_CHANNEL_2: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - break; - } - - default : - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - break; - } - } - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Encoder Interface. - * @param htim TIM Encoder Interface handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channels 1 and 2 - (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ - switch (Channel) - { - case TIM_CHANNEL_1: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - break; - } - - case TIM_CHANNEL_2: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - break; - } - - default : - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - break; - } - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel(s) state */ - if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) - { - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Encoder Interface in interrupt mode. - * @param htim TIM Encoder Interface handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - - /* Check the parameters */ - assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); - - /* Set the TIM channel(s) state */ - if (Channel == TIM_CHANNEL_1) - { - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else if (Channel == TIM_CHANNEL_2) - { - if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - - /* Enable the encoder interface channels */ - /* Enable the capture compare Interrupts 1 and/or 2 */ - switch (Channel) - { - case TIM_CHANNEL_1: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - - default : - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - } - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Encoder Interface in interrupt mode. - * @param htim TIM Encoder Interface handle - * @param Channel TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channels 1 and 2 - (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ - if (Channel == TIM_CHANNEL_1) - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - - /* Disable the capture compare Interrupts 1 */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - } - else if (Channel == TIM_CHANNEL_2) - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - /* Disable the capture compare Interrupts 2 */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - } - else - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - /* Disable the capture compare Interrupts 1 and 2 */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel(s) state */ - if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) - { - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Encoder Interface in DMA mode. - * @param htim TIM Encoder Interface handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @param pData1 The destination Buffer address for IC1. - * @param pData2 The destination Buffer address for IC2. - * @param Length The length of data to be transferred from TIM peripheral to memory. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, - uint32_t *pData2, uint16_t Length) -{ - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - - /* Check the parameters */ - assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); - - /* Set the TIM channel(s) state */ - if (Channel == TIM_CHANNEL_1) - { - if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) - || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) - { - return HAL_BUSY; - } - else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) - && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) - { - if ((pData1 == NULL) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - return HAL_ERROR; - } - } - else if (Channel == TIM_CHANNEL_2) - { - if ((channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) - || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) - { - return HAL_BUSY; - } - else if ((channel_2_state == HAL_TIM_CHANNEL_STATE_READY) - && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) - { - if ((pData2 == NULL) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - return HAL_ERROR; - } - } - else - { - if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) - || (channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) - || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) - || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) - { - return HAL_BUSY; - } - else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) - && (channel_2_state == HAL_TIM_CHANNEL_STATE_READY) - && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY) - && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) - { - if ((((pData1 == NULL) || (pData2 == NULL))) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - return HAL_ERROR; - } - } - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Input Capture DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - break; - } - - case TIM_CHANNEL_2: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError; - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Input Capture DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - break; - } - - default: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - - /* Enable the TIM Input Capture DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - /* Enable the TIM Input Capture DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - break; - } - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Encoder Interface in DMA mode. - * @param htim TIM Encoder Interface handle - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channels 1 and 2 - (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ - if (Channel == TIM_CHANNEL_1) - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - - /* Disable the capture compare DMA Request 1 */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - } - else if (Channel == TIM_CHANNEL_2) - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - /* Disable the capture compare DMA Request 2 */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - } - else - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - /* Disable the capture compare DMA Request 1 and 2 */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel(s) state */ - if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) - { - TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ -/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management - * @brief TIM IRQ handler management - * -@verbatim - ============================================================================== - ##### IRQ handler management ##### - ============================================================================== - [..] - This section provides Timer IRQ handler function. - -@endverbatim - * @{ - */ -/** - * @brief This function handles TIM interrupts requests. - * @param htim TIM handle - * @retval None - */ -void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) -{ - /* Capture compare 1 event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) != RESET) - { - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1); - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - - /* Input capture event */ - if ((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00U) - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->IC_CaptureCallback(htim); -#else - HAL_TIM_IC_CaptureCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - /* Output compare event */ - else - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->OC_DelayElapsedCallback(htim); - htim->PWM_PulseFinishedCallback(htim); -#else - HAL_TIM_OC_DelayElapsedCallback(htim); - HAL_TIM_PWM_PulseFinishedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; - } - } - } - /* Capture compare 2 event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2); - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - /* Input capture event */ - if ((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00U) - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->IC_CaptureCallback(htim); -#else - HAL_TIM_IC_CaptureCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - /* Output compare event */ - else - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->OC_DelayElapsedCallback(htim); - htim->PWM_PulseFinishedCallback(htim); -#else - HAL_TIM_OC_DelayElapsedCallback(htim); - HAL_TIM_PWM_PulseFinishedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; - } - } - /* Capture compare 3 event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3); - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - /* Input capture event */ - if ((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00U) - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->IC_CaptureCallback(htim); -#else - HAL_TIM_IC_CaptureCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - /* Output compare event */ - else - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->OC_DelayElapsedCallback(htim); - htim->PWM_PulseFinishedCallback(htim); -#else - HAL_TIM_OC_DelayElapsedCallback(htim); - HAL_TIM_PWM_PulseFinishedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; - } - } - /* Capture compare 4 event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4); - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - /* Input capture event */ - if ((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00U) - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->IC_CaptureCallback(htim); -#else - HAL_TIM_IC_CaptureCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - /* Output compare event */ - else - { -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->OC_DelayElapsedCallback(htim); - htim->PWM_PulseFinishedCallback(htim); -#else - HAL_TIM_OC_DelayElapsedCallback(htim); - HAL_TIM_PWM_PulseFinishedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; - } - } - /* TIM Update event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE); -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->PeriodElapsedCallback(htim); -#else - HAL_TIM_PeriodElapsedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - } - /* TIM Break input event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK); -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->BreakCallback(htim); -#else - HAL_TIMEx_BreakCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - } - /* TIM Trigger detection event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER); -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->TriggerCallback(htim); -#else - HAL_TIM_TriggerCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - } - /* TIM commutation event */ - if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET) - { - if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_COM) != RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_FLAG_COM); -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->CommutationCallback(htim); -#else - HAL_TIMEx_CommutCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - } -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions - * @brief TIM Peripheral Control functions - * -@verbatim - ============================================================================== - ##### Peripheral Control functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode. - (+) Configure External Clock source. - (+) Configure Complementary channels, break features and dead time. - (+) Configure Master and the Slave synchronization. - (+) Configure the DMA Burst Mode. - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the TIM Output Compare Channels according to the specified - * parameters in the TIM_OC_InitTypeDef. - * @param htim TIM Output Compare handle - * @param sConfig TIM Output Compare configuration structure - * @param Channel TIM Channels to configure - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, - TIM_OC_InitTypeDef *sConfig, - uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CHANNELS(Channel)); - assert_param(IS_TIM_OC_MODE(sConfig->OCMode)); - assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); - - /* Process Locked */ - __HAL_LOCK(htim); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - - /* Configure the TIM Channel 1 in Output Compare */ - TIM_OC1_SetConfig(htim->Instance, sConfig); - break; - } - - case TIM_CHANNEL_2: - { - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - /* Configure the TIM Channel 2 in Output Compare */ - TIM_OC2_SetConfig(htim->Instance, sConfig); - break; - } - - case TIM_CHANNEL_3: - { - /* Check the parameters */ - assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); - - /* Configure the TIM Channel 3 in Output Compare */ - TIM_OC3_SetConfig(htim->Instance, sConfig); - break; - } - - case TIM_CHANNEL_4: - { - /* Check the parameters */ - assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); - - /* Configure the TIM Channel 4 in Output Compare */ - TIM_OC4_SetConfig(htim->Instance, sConfig); - break; - } - - default: - status = HAL_ERROR; - break; - } - - __HAL_UNLOCK(htim); - - return status; -} - -/** - * @brief Initializes the TIM Input Capture Channels according to the specified - * parameters in the TIM_IC_InitTypeDef. - * @param htim TIM IC handle - * @param sConfig TIM Input Capture configuration structure - * @param Channel TIM Channel to configure - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity)); - assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection)); - assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler)); - assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter)); - - /* Process Locked */ - __HAL_LOCK(htim); - - if (Channel == TIM_CHANNEL_1) - { - /* TI1 Configuration */ - TIM_TI1_SetConfig(htim->Instance, - sConfig->ICPolarity, - sConfig->ICSelection, - sConfig->ICFilter); - - /* Reset the IC1PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; - - /* Set the IC1PSC value */ - htim->Instance->CCMR1 |= sConfig->ICPrescaler; - } - else if (Channel == TIM_CHANNEL_2) - { - /* TI2 Configuration */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - TIM_TI2_SetConfig(htim->Instance, - sConfig->ICPolarity, - sConfig->ICSelection, - sConfig->ICFilter); - - /* Reset the IC2PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; - - /* Set the IC2PSC value */ - htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8U); - } - else if (Channel == TIM_CHANNEL_3) - { - /* TI3 Configuration */ - assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); - - TIM_TI3_SetConfig(htim->Instance, - sConfig->ICPolarity, - sConfig->ICSelection, - sConfig->ICFilter); - - /* Reset the IC3PSC Bits */ - htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC; - - /* Set the IC3PSC value */ - htim->Instance->CCMR2 |= sConfig->ICPrescaler; - } - else if (Channel == TIM_CHANNEL_4) - { - /* TI4 Configuration */ - assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); - - TIM_TI4_SetConfig(htim->Instance, - sConfig->ICPolarity, - sConfig->ICSelection, - sConfig->ICFilter); - - /* Reset the IC4PSC Bits */ - htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC; - - /* Set the IC4PSC value */ - htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8U); - } - else - { - status = HAL_ERROR; - } - - __HAL_UNLOCK(htim); - - return status; -} - -/** - * @brief Initializes the TIM PWM channels according to the specified - * parameters in the TIM_OC_InitTypeDef. - * @param htim TIM PWM handle - * @param sConfig TIM PWM configuration structure - * @param Channel TIM Channels to be configured - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, - TIM_OC_InitTypeDef *sConfig, - uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CHANNELS(Channel)); - assert_param(IS_TIM_PWM_MODE(sConfig->OCMode)); - assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); - assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode)); - - /* Process Locked */ - __HAL_LOCK(htim); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - - /* Configure the Channel 1 in PWM mode */ - TIM_OC1_SetConfig(htim->Instance, sConfig); - - /* Set the Preload enable bit for channel1 */ - htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE; - - /* Configure the Output Fast mode */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE; - htim->Instance->CCMR1 |= sConfig->OCFastMode; - break; - } - - case TIM_CHANNEL_2: - { - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - /* Configure the Channel 2 in PWM mode */ - TIM_OC2_SetConfig(htim->Instance, sConfig); - - /* Set the Preload enable bit for channel2 */ - htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE; - - /* Configure the Output Fast mode */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE; - htim->Instance->CCMR1 |= sConfig->OCFastMode << 8U; - break; - } - - case TIM_CHANNEL_3: - { - /* Check the parameters */ - assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); - - /* Configure the Channel 3 in PWM mode */ - TIM_OC3_SetConfig(htim->Instance, sConfig); - - /* Set the Preload enable bit for channel3 */ - htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE; - - /* Configure the Output Fast mode */ - htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE; - htim->Instance->CCMR2 |= sConfig->OCFastMode; - break; - } - - case TIM_CHANNEL_4: - { - /* Check the parameters */ - assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); - - /* Configure the Channel 4 in PWM mode */ - TIM_OC4_SetConfig(htim->Instance, sConfig); - - /* Set the Preload enable bit for channel4 */ - htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE; - - /* Configure the Output Fast mode */ - htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE; - htim->Instance->CCMR2 |= sConfig->OCFastMode << 8U; - break; - } - - default: - status = HAL_ERROR; - break; - } - - __HAL_UNLOCK(htim); - - return status; -} - -/** - * @brief Initializes the TIM One Pulse Channels according to the specified - * parameters in the TIM_OnePulse_InitTypeDef. - * @param htim TIM One Pulse handle - * @param sConfig TIM One Pulse configuration structure - * @param OutputChannel TIM output channel to configure - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @param InputChannel TIM input Channel to configure - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @note To output a waveform with a minimum delay user can enable the fast - * mode by calling the @ref __HAL_TIM_ENABLE_OCxFAST macro. Then CCx - * output is forced in response to the edge detection on TIx input, - * without taking in account the comparison. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, - uint32_t OutputChannel, uint32_t InputChannel) -{ - HAL_StatusTypeDef status = HAL_OK; - TIM_OC_InitTypeDef temp1; - - /* Check the parameters */ - assert_param(IS_TIM_OPM_CHANNELS(OutputChannel)); - assert_param(IS_TIM_OPM_CHANNELS(InputChannel)); - - if (OutputChannel != InputChannel) - { - /* Process Locked */ - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Extract the Output compare configuration from sConfig structure */ - temp1.OCMode = sConfig->OCMode; - temp1.Pulse = sConfig->Pulse; - temp1.OCPolarity = sConfig->OCPolarity; - temp1.OCNPolarity = sConfig->OCNPolarity; - temp1.OCIdleState = sConfig->OCIdleState; - temp1.OCNIdleState = sConfig->OCNIdleState; - - switch (OutputChannel) - { - case TIM_CHANNEL_1: - { - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - - TIM_OC1_SetConfig(htim->Instance, &temp1); - break; - } - - case TIM_CHANNEL_2: - { - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - TIM_OC2_SetConfig(htim->Instance, &temp1); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - switch (InputChannel) - { - case TIM_CHANNEL_1: - { - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - - TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity, - sConfig->ICSelection, sConfig->ICFilter); - - /* Reset the IC1PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; - - /* Select the Trigger source */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= TIM_TS_TI1FP1; - - /* Select the Slave Mode */ - htim->Instance->SMCR &= ~TIM_SMCR_SMS; - htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; - break; - } - - case TIM_CHANNEL_2: - { - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity, - sConfig->ICSelection, sConfig->ICFilter); - - /* Reset the IC2PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; - - /* Select the Trigger source */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= TIM_TS_TI2FP2; - - /* Select the Slave Mode */ - htim->Instance->SMCR &= ~TIM_SMCR_SMS; - htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; - break; - } - - default: - status = HAL_ERROR; - break; - } - } - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return status; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral - * @param htim TIM handle - * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write - * This parameter can be one of the following values: - * @arg TIM_DMABASE_CR1 - * @arg TIM_DMABASE_CR2 - * @arg TIM_DMABASE_SMCR - * @arg TIM_DMABASE_DIER - * @arg TIM_DMABASE_SR - * @arg TIM_DMABASE_EGR - * @arg TIM_DMABASE_CCMR1 - * @arg TIM_DMABASE_CCMR2 - * @arg TIM_DMABASE_CCER - * @arg TIM_DMABASE_CNT - * @arg TIM_DMABASE_PSC - * @arg TIM_DMABASE_ARR - * @arg TIM_DMABASE_RCR - * @arg TIM_DMABASE_CCR1 - * @arg TIM_DMABASE_CCR2 - * @arg TIM_DMABASE_CCR3 - * @arg TIM_DMABASE_CCR4 - * @arg TIM_DMABASE_BDTR - * @param BurstRequestSrc TIM DMA Request sources - * This parameter can be one of the following values: - * @arg TIM_DMA_UPDATE: TIM update Interrupt source - * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source - * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source - * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source - * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source - * @arg TIM_DMA_COM: TIM Commutation DMA source - * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source - * @param BurstBuffer The Buffer address. - * @param BurstLength DMA Burst length. This parameter can be one value - * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. - * @note This function should be used only when BurstLength is equal to DMA data transfer length. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) -{ - HAL_StatusTypeDef status; - - status = HAL_TIM_DMABurst_MultiWriteStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, - ((BurstLength) >> 8U) + 1U); - - - - return status; -} - -/** - * @brief Configure the DMA Burst to transfer multiple Data from the memory to the TIM peripheral - * @param htim TIM handle - * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write - * This parameter can be one of the following values: - * @arg TIM_DMABASE_CR1 - * @arg TIM_DMABASE_CR2 - * @arg TIM_DMABASE_SMCR - * @arg TIM_DMABASE_DIER - * @arg TIM_DMABASE_SR - * @arg TIM_DMABASE_EGR - * @arg TIM_DMABASE_CCMR1 - * @arg TIM_DMABASE_CCMR2 - * @arg TIM_DMABASE_CCER - * @arg TIM_DMABASE_CNT - * @arg TIM_DMABASE_PSC - * @arg TIM_DMABASE_ARR - * @arg TIM_DMABASE_RCR - * @arg TIM_DMABASE_CCR1 - * @arg TIM_DMABASE_CCR2 - * @arg TIM_DMABASE_CCR3 - * @arg TIM_DMABASE_CCR4 - * @arg TIM_DMABASE_BDTR - * @param BurstRequestSrc TIM DMA Request sources - * This parameter can be one of the following values: - * @arg TIM_DMA_UPDATE: TIM update Interrupt source - * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source - * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source - * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source - * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source - * @arg TIM_DMA_COM: TIM Commutation DMA source - * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source - * @param BurstBuffer The Buffer address. - * @param BurstLength DMA Burst length. This parameter can be one value - * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. - * @param DataLength Data length. This parameter can be one value - * between 1 and 0xFFFF. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, uint32_t *BurstBuffer, - uint32_t BurstLength, uint32_t DataLength) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); - assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); - assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); - assert_param(IS_TIM_DMA_LENGTH(BurstLength)); - assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); - - if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) - { - return HAL_BUSY; - } - else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) - { - if ((BurstBuffer == NULL) && (BurstLength > 0U)) - { - return HAL_ERROR; - } - else - { - htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; - } - } - else - { - /* nothing to do */ - } - - switch (BurstRequestSrc) - { - case TIM_DMA_UPDATE: - { - /* Set the DMA Period elapsed callbacks */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; - htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC1: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC2: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC3: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC4: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; - htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_COM: - { - /* Set the DMA commutation callbacks */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_TRIGGER: - { - /* Set the DMA trigger callbacks */ - htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; - htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Configure the DMA Burst Mode */ - htim->Instance->DCR = (BurstBaseAddress | BurstLength); - /* Enable the TIM DMA Request */ - __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the TIM DMA Burst mode - * @param htim TIM handle - * @param BurstRequestSrc TIM DMA Request sources to disable - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); - - /* Abort the DMA transfer (at least disable the DMA stream) */ - switch (BurstRequestSrc) - { - case TIM_DMA_UPDATE: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); - break; - } - case TIM_DMA_CC1: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - case TIM_DMA_CC2: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - case TIM_DMA_CC3: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - case TIM_DMA_CC4: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); - break; - } - case TIM_DMA_COM: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); - break; - } - case TIM_DMA_TRIGGER: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); - break; - } - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the TIM Update DMA request */ - __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); - - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - } - - /* Return function status */ - return status; -} - -/** - * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory - * @param htim TIM handle - * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read - * This parameter can be one of the following values: - * @arg TIM_DMABASE_CR1 - * @arg TIM_DMABASE_CR2 - * @arg TIM_DMABASE_SMCR - * @arg TIM_DMABASE_DIER - * @arg TIM_DMABASE_SR - * @arg TIM_DMABASE_EGR - * @arg TIM_DMABASE_CCMR1 - * @arg TIM_DMABASE_CCMR2 - * @arg TIM_DMABASE_CCER - * @arg TIM_DMABASE_CNT - * @arg TIM_DMABASE_PSC - * @arg TIM_DMABASE_ARR - * @arg TIM_DMABASE_RCR - * @arg TIM_DMABASE_CCR1 - * @arg TIM_DMABASE_CCR2 - * @arg TIM_DMABASE_CCR3 - * @arg TIM_DMABASE_CCR4 - * @arg TIM_DMABASE_BDTR - * @param BurstRequestSrc TIM DMA Request sources - * This parameter can be one of the following values: - * @arg TIM_DMA_UPDATE: TIM update Interrupt source - * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source - * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source - * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source - * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source - * @arg TIM_DMA_COM: TIM Commutation DMA source - * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source - * @param BurstBuffer The Buffer address. - * @param BurstLength DMA Burst length. This parameter can be one value - * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. - * @note This function should be used only when BurstLength is equal to DMA data transfer length. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) -{ - HAL_StatusTypeDef status; - - status = HAL_TIM_DMABurst_MultiReadStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, - ((BurstLength) >> 8U) + 1U); - - - return status; -} - -/** - * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory - * @param htim TIM handle - * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read - * This parameter can be one of the following values: - * @arg TIM_DMABASE_CR1 - * @arg TIM_DMABASE_CR2 - * @arg TIM_DMABASE_SMCR - * @arg TIM_DMABASE_DIER - * @arg TIM_DMABASE_SR - * @arg TIM_DMABASE_EGR - * @arg TIM_DMABASE_CCMR1 - * @arg TIM_DMABASE_CCMR2 - * @arg TIM_DMABASE_CCER - * @arg TIM_DMABASE_CNT - * @arg TIM_DMABASE_PSC - * @arg TIM_DMABASE_ARR - * @arg TIM_DMABASE_RCR - * @arg TIM_DMABASE_CCR1 - * @arg TIM_DMABASE_CCR2 - * @arg TIM_DMABASE_CCR3 - * @arg TIM_DMABASE_CCR4 - * @arg TIM_DMABASE_BDTR - * @param BurstRequestSrc TIM DMA Request sources - * This parameter can be one of the following values: - * @arg TIM_DMA_UPDATE: TIM update Interrupt source - * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source - * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source - * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source - * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source - * @arg TIM_DMA_COM: TIM Commutation DMA source - * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source - * @param BurstBuffer The Buffer address. - * @param BurstLength DMA Burst length. This parameter can be one value - * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. - * @param DataLength Data length. This parameter can be one value - * between 1 and 0xFFFF. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, uint32_t *BurstBuffer, - uint32_t BurstLength, uint32_t DataLength) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); - assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); - assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); - assert_param(IS_TIM_DMA_LENGTH(BurstLength)); - assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); - - if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) - { - return HAL_BUSY; - } - else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) - { - if ((BurstBuffer == NULL) && (BurstLength > 0U)) - { - return HAL_ERROR; - } - else - { - htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; - } - } - else - { - /* nothing to do */ - } - switch (BurstRequestSrc) - { - case TIM_DMA_UPDATE: - { - /* Set the DMA Period elapsed callbacks */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; - htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC1: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC2: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC3: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_CC4: - { - /* Set the DMA capture callbacks */ - htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_COM: - { - /* Set the DMA commutation callbacks */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - case TIM_DMA_TRIGGER: - { - /* Set the DMA trigger callbacks */ - htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; - htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, - DataLength) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - break; - } - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Configure the DMA Burst Mode */ - htim->Instance->DCR = (BurstBaseAddress | BurstLength); - - /* Enable the TIM DMA Request */ - __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); - } - - /* Return function status */ - return status; -} - -/** - * @brief Stop the DMA burst reading - * @param htim TIM handle - * @param BurstRequestSrc TIM DMA Request sources to disable. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); - - /* Abort the DMA transfer (at least disable the DMA stream) */ - switch (BurstRequestSrc) - { - case TIM_DMA_UPDATE: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); - break; - } - case TIM_DMA_CC1: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - case TIM_DMA_CC2: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - case TIM_DMA_CC3: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - case TIM_DMA_CC4: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); - break; - } - case TIM_DMA_COM: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); - break; - } - case TIM_DMA_TRIGGER: - { - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); - break; - } - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the TIM Update DMA request */ - __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); - - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - } - - /* Return function status */ - return status; -} - -/** - * @brief Generate a software event - * @param htim TIM handle - * @param EventSource specifies the event source. - * This parameter can be one of the following values: - * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source - * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source - * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source - * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source - * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source - * @arg TIM_EVENTSOURCE_COM: Timer COM event source - * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source - * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source - * @note Basic timers can only generate an update event. - * @note TIM_EVENTSOURCE_COM is relevant only with advanced timer instances. - * @note TIM_EVENTSOURCE_BREAK are relevant only for timer instances - * supporting a break input. - * @retval HAL status - */ - -HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_EVENT_SOURCE(EventSource)); - - /* Process Locked */ - __HAL_LOCK(htim); - - /* Change the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Set the event sources */ - htim->Instance->EGR = EventSource; - - /* Change the TIM state */ - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Configures the OCRef clear feature - * @param htim TIM handle - * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that - * contains the OCREF clear feature and parameters for the TIM peripheral. - * @param Channel specifies the TIM Channel - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 - * @arg TIM_CHANNEL_2: TIM Channel 2 - * @arg TIM_CHANNEL_3: TIM Channel 3 - * @arg TIM_CHANNEL_4: TIM Channel 4 - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, - TIM_ClearInputConfigTypeDef *sClearInputConfig, - uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance)); - assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource)); - - /* Process Locked */ - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - switch (sClearInputConfig->ClearInputSource) - { - case TIM_CLEARINPUTSOURCE_NONE: - { - /* Clear the OCREF clear selection bit and the the ETR Bits */ - CLEAR_BIT(htim->Instance->SMCR, (TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP)); - break; - } - - case TIM_CLEARINPUTSOURCE_ETR: - { - /* Check the parameters */ - assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity)); - assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler)); - assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter)); - - /* When OCRef clear feature is used with ETR source, ETR prescaler must be off */ - if (sClearInputConfig->ClearInputPrescaler != TIM_CLEARINPUTPRESCALER_DIV1) - { - htim->State = HAL_TIM_STATE_READY; - __HAL_UNLOCK(htim); - return HAL_ERROR; - } - - TIM_ETR_SetConfig(htim->Instance, - sClearInputConfig->ClearInputPrescaler, - sClearInputConfig->ClearInputPolarity, - sClearInputConfig->ClearInputFilter); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - switch (Channel) - { - case TIM_CHANNEL_1: - { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) - { - /* Enable the OCREF clear feature for Channel 1 */ - SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); - } - else - { - /* Disable the OCREF clear feature for Channel 1 */ - CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); - } - break; - } - case TIM_CHANNEL_2: - { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) - { - /* Enable the OCREF clear feature for Channel 2 */ - SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); - } - else - { - /* Disable the OCREF clear feature for Channel 2 */ - CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); - } - break; - } - case TIM_CHANNEL_3: - { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) - { - /* Enable the OCREF clear feature for Channel 3 */ - SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); - } - else - { - /* Disable the OCREF clear feature for Channel 3 */ - CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); - } - break; - } - case TIM_CHANNEL_4: - { - if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) - { - /* Enable the OCREF clear feature for Channel 4 */ - SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); - } - else - { - /* Disable the OCREF clear feature for Channel 4 */ - CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); - } - break; - } - default: - break; - } - } - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return status; -} - -/** - * @brief Configures the clock source to be used - * @param htim TIM handle - * @param sClockSourceConfig pointer to a TIM_ClockConfigTypeDef structure that - * contains the clock source information for the TIM peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - /* Process Locked */ - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Check the parameters */ - assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource)); - - /* Reset the SMS, TS, ECE, ETPS and ETRF bits */ - tmpsmcr = htim->Instance->SMCR; - tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS); - tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); - htim->Instance->SMCR = tmpsmcr; - - switch (sClockSourceConfig->ClockSource) - { - case TIM_CLOCKSOURCE_INTERNAL: - { - assert_param(IS_TIM_INSTANCE(htim->Instance)); - break; - } - - case TIM_CLOCKSOURCE_ETRMODE1: - { - /* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/ - assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); - - /* Check ETR input conditioning related parameters */ - assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); - assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); - assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); - - /* Configure the ETR Clock source */ - TIM_ETR_SetConfig(htim->Instance, - sClockSourceConfig->ClockPrescaler, - sClockSourceConfig->ClockPolarity, - sClockSourceConfig->ClockFilter); - - /* Select the External clock mode1 and the ETRF trigger */ - tmpsmcr = htim->Instance->SMCR; - tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1); - /* Write to TIMx SMCR */ - htim->Instance->SMCR = tmpsmcr; - break; - } - - case TIM_CLOCKSOURCE_ETRMODE2: - { - /* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/ - assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance)); - - /* Check ETR input conditioning related parameters */ - assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); - assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); - assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); - - /* Configure the ETR Clock source */ - TIM_ETR_SetConfig(htim->Instance, - sClockSourceConfig->ClockPrescaler, - sClockSourceConfig->ClockPolarity, - sClockSourceConfig->ClockFilter); - /* Enable the External clock mode2 */ - htim->Instance->SMCR |= TIM_SMCR_ECE; - break; - } - - case TIM_CLOCKSOURCE_TI1: - { - /* Check whether or not the timer instance supports external clock mode 1 */ - assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); - - /* Check TI1 input conditioning related parameters */ - assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); - assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); - - TIM_TI1_ConfigInputStage(htim->Instance, - sClockSourceConfig->ClockPolarity, - sClockSourceConfig->ClockFilter); - TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1); - break; - } - - case TIM_CLOCKSOURCE_TI2: - { - /* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/ - assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); - - /* Check TI2 input conditioning related parameters */ - assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); - assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); - - TIM_TI2_ConfigInputStage(htim->Instance, - sClockSourceConfig->ClockPolarity, - sClockSourceConfig->ClockFilter); - TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2); - break; - } - - case TIM_CLOCKSOURCE_TI1ED: - { - /* Check whether or not the timer instance supports external clock mode 1 */ - assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); - - /* Check TI1 input conditioning related parameters */ - assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); - assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); - - TIM_TI1_ConfigInputStage(htim->Instance, - sClockSourceConfig->ClockPolarity, - sClockSourceConfig->ClockFilter); - TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED); - break; - } - - case TIM_CLOCKSOURCE_ITR0: - case TIM_CLOCKSOURCE_ITR1: - case TIM_CLOCKSOURCE_ITR2: - case TIM_CLOCKSOURCE_ITR3: - { - /* Check whether or not the timer instance supports internal trigger input */ - assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); - - TIM_ITRx_SetConfig(htim->Instance, sClockSourceConfig->ClockSource); - break; - } - - default: - status = HAL_ERROR; - break; - } - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return status; -} - -/** - * @brief Selects the signal connected to the TI1 input: direct from CH1_input - * or a XOR combination between CH1_input, CH2_input & CH3_input - * @param htim TIM handle. - * @param TI1_Selection Indicate whether or not channel 1 is connected to the - * output of a XOR gate. - * This parameter can be one of the following values: - * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input - * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3 - * pins are connected to the TI1 input (XOR combination) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection) -{ - uint32_t tmpcr2; - - /* Check the parameters */ - assert_param(IS_TIM_XOR_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TI1SELECTION(TI1_Selection)); - - /* Get the TIMx CR2 register value */ - tmpcr2 = htim->Instance->CR2; - - /* Reset the TI1 selection */ - tmpcr2 &= ~TIM_CR2_TI1S; - - /* Set the TI1 selection */ - tmpcr2 |= TI1_Selection; - - /* Write to TIMxCR2 */ - htim->Instance->CR2 = tmpcr2; - - return HAL_OK; -} - -/** - * @brief Configures the TIM in Slave mode - * @param htim TIM handle. - * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that - * contains the selected trigger (internal trigger input, filtered - * timer input or external trigger input) and the Slave mode - * (Disable, Reset, Gated, Trigger, External clock mode 1). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig) -{ - /* Check the parameters */ - assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); - assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); - assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); - - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) - { - htim->State = HAL_TIM_STATE_READY; - __HAL_UNLOCK(htim); - return HAL_ERROR; - } - - /* Disable Trigger Interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER); - - /* Disable Trigger DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configures the TIM in Slave mode in interrupt mode - * @param htim TIM handle. - * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that - * contains the selected trigger (internal trigger input, filtered - * timer input or external trigger input) and the Slave mode - * (Disable, Reset, Gated, Trigger, External clock mode 1). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, - TIM_SlaveConfigTypeDef *sSlaveConfig) -{ - /* Check the parameters */ - assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); - assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); - assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); - - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) - { - htim->State = HAL_TIM_STATE_READY; - __HAL_UNLOCK(htim); - return HAL_ERROR; - } - - /* Enable Trigger Interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER); - - /* Disable Trigger DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Read the captured value from Capture Compare unit - * @param htim TIM handle. - * @param Channel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval Captured value - */ -uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpreg = 0U; - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - - /* Return the capture 1 value */ - tmpreg = htim->Instance->CCR1; - - break; - } - case TIM_CHANNEL_2: - { - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - /* Return the capture 2 value */ - tmpreg = htim->Instance->CCR2; - - break; - } - - case TIM_CHANNEL_3: - { - /* Check the parameters */ - assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); - - /* Return the capture 3 value */ - tmpreg = htim->Instance->CCR3; - - break; - } - - case TIM_CHANNEL_4: - { - /* Check the parameters */ - assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); - - /* Return the capture 4 value */ - tmpreg = htim->Instance->CCR4; - - break; - } - - default: - break; - } - - return tmpreg; -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions - * @brief TIM Callbacks functions - * -@verbatim - ============================================================================== - ##### TIM Callbacks functions ##### - ============================================================================== - [..] - This section provides TIM callback functions: - (+) TIM Period elapsed callback - (+) TIM Output Compare callback - (+) TIM Input capture callback - (+) TIM Trigger callback - (+) TIM Error callback - -@endverbatim - * @{ - */ - -/** - * @brief Period elapsed callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_PeriodElapsedCallback could be implemented in the user file - */ -} - -/** - * @brief Period elapsed half complete callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_PeriodElapsedHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Output Compare callback in non-blocking mode - * @param htim TIM OC handle - * @retval None - */ -__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file - */ -} - -/** - * @brief Input Capture callback in non-blocking mode - * @param htim TIM IC handle - * @retval None - */ -__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_IC_CaptureCallback could be implemented in the user file - */ -} - -/** - * @brief Input Capture half complete callback in non-blocking mode - * @param htim TIM IC handle - * @retval None - */ -__weak void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_IC_CaptureHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief PWM Pulse finished callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file - */ -} - -/** - * @brief PWM Pulse finished half complete callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_PWM_PulseFinishedHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Hall Trigger detection callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_TriggerCallback could be implemented in the user file - */ -} - -/** - * @brief Hall Trigger detection half complete callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_TriggerHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Timer error callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIM_ErrorCallback could be implemented in the user file - */ -} - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User TIM callback to be used instead of the weak predefined callback - * @param htim tim handle - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID - * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID - * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID - * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID - * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID - * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID - * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID - * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID - * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID - * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID - * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID - * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID - * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID - * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID - * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID - * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID - * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID - * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID - * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID - * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID - * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID - * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID - * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID - * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID - * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID - * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID - * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID - * @param pCallback pointer to the callback function - * @retval status - */ -HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, - pTIM_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(htim); - - if (htim->State == HAL_TIM_STATE_READY) - { - switch (CallbackID) - { - case HAL_TIM_BASE_MSPINIT_CB_ID : - htim->Base_MspInitCallback = pCallback; - break; - - case HAL_TIM_BASE_MSPDEINIT_CB_ID : - htim->Base_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_IC_MSPINIT_CB_ID : - htim->IC_MspInitCallback = pCallback; - break; - - case HAL_TIM_IC_MSPDEINIT_CB_ID : - htim->IC_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_OC_MSPINIT_CB_ID : - htim->OC_MspInitCallback = pCallback; - break; - - case HAL_TIM_OC_MSPDEINIT_CB_ID : - htim->OC_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_PWM_MSPINIT_CB_ID : - htim->PWM_MspInitCallback = pCallback; - break; - - case HAL_TIM_PWM_MSPDEINIT_CB_ID : - htim->PWM_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : - htim->OnePulse_MspInitCallback = pCallback; - break; - - case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : - htim->OnePulse_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_ENCODER_MSPINIT_CB_ID : - htim->Encoder_MspInitCallback = pCallback; - break; - - case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : - htim->Encoder_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : - htim->HallSensor_MspInitCallback = pCallback; - break; - - case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : - htim->HallSensor_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_PERIOD_ELAPSED_CB_ID : - htim->PeriodElapsedCallback = pCallback; - break; - - case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : - htim->PeriodElapsedHalfCpltCallback = pCallback; - break; - - case HAL_TIM_TRIGGER_CB_ID : - htim->TriggerCallback = pCallback; - break; - - case HAL_TIM_TRIGGER_HALF_CB_ID : - htim->TriggerHalfCpltCallback = pCallback; - break; - - case HAL_TIM_IC_CAPTURE_CB_ID : - htim->IC_CaptureCallback = pCallback; - break; - - case HAL_TIM_IC_CAPTURE_HALF_CB_ID : - htim->IC_CaptureHalfCpltCallback = pCallback; - break; - - case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : - htim->OC_DelayElapsedCallback = pCallback; - break; - - case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : - htim->PWM_PulseFinishedCallback = pCallback; - break; - - case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : - htim->PWM_PulseFinishedHalfCpltCallback = pCallback; - break; - - case HAL_TIM_ERROR_CB_ID : - htim->ErrorCallback = pCallback; - break; - - case HAL_TIM_COMMUTATION_CB_ID : - htim->CommutationCallback = pCallback; - break; - - case HAL_TIM_COMMUTATION_HALF_CB_ID : - htim->CommutationHalfCpltCallback = pCallback; - break; - - case HAL_TIM_BREAK_CB_ID : - htim->BreakCallback = pCallback; - break; - - default : - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (htim->State == HAL_TIM_STATE_RESET) - { - switch (CallbackID) - { - case HAL_TIM_BASE_MSPINIT_CB_ID : - htim->Base_MspInitCallback = pCallback; - break; - - case HAL_TIM_BASE_MSPDEINIT_CB_ID : - htim->Base_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_IC_MSPINIT_CB_ID : - htim->IC_MspInitCallback = pCallback; - break; - - case HAL_TIM_IC_MSPDEINIT_CB_ID : - htim->IC_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_OC_MSPINIT_CB_ID : - htim->OC_MspInitCallback = pCallback; - break; - - case HAL_TIM_OC_MSPDEINIT_CB_ID : - htim->OC_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_PWM_MSPINIT_CB_ID : - htim->PWM_MspInitCallback = pCallback; - break; - - case HAL_TIM_PWM_MSPDEINIT_CB_ID : - htim->PWM_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : - htim->OnePulse_MspInitCallback = pCallback; - break; - - case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : - htim->OnePulse_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_ENCODER_MSPINIT_CB_ID : - htim->Encoder_MspInitCallback = pCallback; - break; - - case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : - htim->Encoder_MspDeInitCallback = pCallback; - break; - - case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : - htim->HallSensor_MspInitCallback = pCallback; - break; - - case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : - htim->HallSensor_MspDeInitCallback = pCallback; - break; - - default : - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return status; -} - -/** - * @brief Unregister a TIM callback - * TIM callback is redirected to the weak predefined callback - * @param htim tim handle - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID - * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID - * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID - * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID - * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID - * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID - * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID - * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID - * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID - * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID - * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID - * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID - * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID - * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID - * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID - * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID - * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID - * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID - * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID - * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID - * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID - * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID - * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID - * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID - * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID - * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID - * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID - * @retval status - */ -HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(htim); - - if (htim->State == HAL_TIM_STATE_READY) - { - switch (CallbackID) - { - case HAL_TIM_BASE_MSPINIT_CB_ID : - /* Legacy weak Base MspInit Callback */ - htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; - break; - - case HAL_TIM_BASE_MSPDEINIT_CB_ID : - /* Legacy weak Base Msp DeInit Callback */ - htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; - break; - - case HAL_TIM_IC_MSPINIT_CB_ID : - /* Legacy weak IC Msp Init Callback */ - htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; - break; - - case HAL_TIM_IC_MSPDEINIT_CB_ID : - /* Legacy weak IC Msp DeInit Callback */ - htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; - break; - - case HAL_TIM_OC_MSPINIT_CB_ID : - /* Legacy weak OC Msp Init Callback */ - htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; - break; - - case HAL_TIM_OC_MSPDEINIT_CB_ID : - /* Legacy weak OC Msp DeInit Callback */ - htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; - break; - - case HAL_TIM_PWM_MSPINIT_CB_ID : - /* Legacy weak PWM Msp Init Callback */ - htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; - break; - - case HAL_TIM_PWM_MSPDEINIT_CB_ID : - /* Legacy weak PWM Msp DeInit Callback */ - htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; - break; - - case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : - /* Legacy weak One Pulse Msp Init Callback */ - htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; - break; - - case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : - /* Legacy weak One Pulse Msp DeInit Callback */ - htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; - break; - - case HAL_TIM_ENCODER_MSPINIT_CB_ID : - /* Legacy weak Encoder Msp Init Callback */ - htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; - break; - - case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : - /* Legacy weak Encoder Msp DeInit Callback */ - htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; - break; - - case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : - /* Legacy weak Hall Sensor Msp Init Callback */ - htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; - break; - - case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : - /* Legacy weak Hall Sensor Msp DeInit Callback */ - htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; - break; - - case HAL_TIM_PERIOD_ELAPSED_CB_ID : - /* Legacy weak Period Elapsed Callback */ - htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; - break; - - case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : - /* Legacy weak Period Elapsed half complete Callback */ - htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; - break; - - case HAL_TIM_TRIGGER_CB_ID : - /* Legacy weak Trigger Callback */ - htim->TriggerCallback = HAL_TIM_TriggerCallback; - break; - - case HAL_TIM_TRIGGER_HALF_CB_ID : - /* Legacy weak Trigger half complete Callback */ - htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; - break; - - case HAL_TIM_IC_CAPTURE_CB_ID : - /* Legacy weak IC Capture Callback */ - htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; - break; - - case HAL_TIM_IC_CAPTURE_HALF_CB_ID : - /* Legacy weak IC Capture half complete Callback */ - htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; - break; - - case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : - /* Legacy weak OC Delay Elapsed Callback */ - htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; - break; - - case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : - /* Legacy weak PWM Pulse Finished Callback */ - htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; - break; - - case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : - /* Legacy weak PWM Pulse Finished half complete Callback */ - htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; - break; - - case HAL_TIM_ERROR_CB_ID : - /* Legacy weak Error Callback */ - htim->ErrorCallback = HAL_TIM_ErrorCallback; - break; - - case HAL_TIM_COMMUTATION_CB_ID : - /* Legacy weak Commutation Callback */ - htim->CommutationCallback = HAL_TIMEx_CommutCallback; - break; - - case HAL_TIM_COMMUTATION_HALF_CB_ID : - /* Legacy weak Commutation half complete Callback */ - htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; - break; - - case HAL_TIM_BREAK_CB_ID : - /* Legacy weak Break Callback */ - htim->BreakCallback = HAL_TIMEx_BreakCallback; - break; - - default : - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (htim->State == HAL_TIM_STATE_RESET) - { - switch (CallbackID) - { - case HAL_TIM_BASE_MSPINIT_CB_ID : - /* Legacy weak Base MspInit Callback */ - htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; - break; - - case HAL_TIM_BASE_MSPDEINIT_CB_ID : - /* Legacy weak Base Msp DeInit Callback */ - htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; - break; - - case HAL_TIM_IC_MSPINIT_CB_ID : - /* Legacy weak IC Msp Init Callback */ - htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; - break; - - case HAL_TIM_IC_MSPDEINIT_CB_ID : - /* Legacy weak IC Msp DeInit Callback */ - htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; - break; - - case HAL_TIM_OC_MSPINIT_CB_ID : - /* Legacy weak OC Msp Init Callback */ - htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; - break; - - case HAL_TIM_OC_MSPDEINIT_CB_ID : - /* Legacy weak OC Msp DeInit Callback */ - htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; - break; - - case HAL_TIM_PWM_MSPINIT_CB_ID : - /* Legacy weak PWM Msp Init Callback */ - htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; - break; - - case HAL_TIM_PWM_MSPDEINIT_CB_ID : - /* Legacy weak PWM Msp DeInit Callback */ - htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; - break; - - case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : - /* Legacy weak One Pulse Msp Init Callback */ - htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; - break; - - case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : - /* Legacy weak One Pulse Msp DeInit Callback */ - htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; - break; - - case HAL_TIM_ENCODER_MSPINIT_CB_ID : - /* Legacy weak Encoder Msp Init Callback */ - htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; - break; - - case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : - /* Legacy weak Encoder Msp DeInit Callback */ - htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; - break; - - case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : - /* Legacy weak Hall Sensor Msp Init Callback */ - htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; - break; - - case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : - /* Legacy weak Hall Sensor Msp DeInit Callback */ - htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; - break; - - default : - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return status; -} -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions - * @brief TIM Peripheral State functions - * -@verbatim - ============================================================================== - ##### Peripheral State functions ##### - ============================================================================== - [..] - This subsection permits to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Return the TIM Base handle state. - * @param htim TIM Base handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM OC handle state. - * @param htim TIM Output Compare handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM PWM handle state. - * @param htim TIM handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM Input Capture handle state. - * @param htim TIM IC handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM One Pulse Mode handle state. - * @param htim TIM OPM handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM Encoder Mode handle state. - * @param htim TIM Encoder Interface handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM Encoder Mode handle state. - * @param htim TIM handle - * @retval Active channel - */ -HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim) -{ - return htim->Channel; -} - -/** - * @brief Return actual state of the TIM channel. - * @param htim TIM handle - * @param Channel TIM Channel - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 - * @arg TIM_CHANNEL_2: TIM Channel 2 - * @arg TIM_CHANNEL_3: TIM Channel 3 - * @arg TIM_CHANNEL_4: TIM Channel 4 - * @arg TIM_CHANNEL_5: TIM Channel 5 - * @arg TIM_CHANNEL_6: TIM Channel 6 - * @retval TIM Channel state - */ -HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_TIM_ChannelStateTypeDef channel_state; - - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); - - return channel_state; -} - -/** - * @brief Return actual state of a DMA burst operation. - * @param htim TIM handle - * @retval DMA burst state - */ -HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); - - return htim->DMABurstState; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup TIM_Private_Functions TIM Private Functions - * @{ - */ - -/** - * @brief TIM DMA error callback - * @param hdma pointer to DMA handle. - * @retval None - */ -void TIM_DMAError(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); - } - else - { - htim->State = HAL_TIM_STATE_READY; - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->ErrorCallback(htim); -#else - HAL_TIM_ErrorCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; -} - -/** - * @brief TIM DMA Delay Pulse complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - } - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - } - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); - } - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); - } - } - else - { - /* nothing to do */ - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->PWM_PulseFinishedCallback(htim); -#else - HAL_TIM_PWM_PulseFinishedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; -} - -/** - * @brief TIM DMA Delay Pulse half complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - } - else - { - /* nothing to do */ - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->PWM_PulseFinishedHalfCpltCallback(htim); -#else - HAL_TIM_PWM_PulseFinishedHalfCpltCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; -} - -/** - * @brief TIM DMA Capture complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - } - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - } - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); - } - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); - } - } - else - { - /* nothing to do */ - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->IC_CaptureCallback(htim); -#else - HAL_TIM_IC_CaptureCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; -} - -/** - * @brief TIM DMA Capture half complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - } - else - { - /* nothing to do */ - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->IC_CaptureHalfCpltCallback(htim); -#else - HAL_TIM_IC_CaptureHalfCpltCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; -} - -/** - * @brief TIM DMA Period Elapse complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (htim->hdma[TIM_DMA_ID_UPDATE]->Init.Mode == DMA_NORMAL) - { - htim->State = HAL_TIM_STATE_READY; - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->PeriodElapsedCallback(htim); -#else - HAL_TIM_PeriodElapsedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} - -/** - * @brief TIM DMA Period Elapse half complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->PeriodElapsedHalfCpltCallback(htim); -#else - HAL_TIM_PeriodElapsedHalfCpltCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} - -/** - * @brief TIM DMA Trigger callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (htim->hdma[TIM_DMA_ID_TRIGGER]->Init.Mode == DMA_NORMAL) - { - htim->State = HAL_TIM_STATE_READY; - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->TriggerCallback(htim); -#else - HAL_TIM_TriggerCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} - -/** - * @brief TIM DMA Trigger half complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->TriggerHalfCpltCallback(htim); -#else - HAL_TIM_TriggerHalfCpltCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} - -/** - * @brief Time Base configuration - * @param TIMx TIM peripheral - * @param Structure TIM Base configuration structure - * @retval None - */ -void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure) -{ - uint32_t tmpcr1; - tmpcr1 = TIMx->CR1; - - /* Set TIM Time Base Unit parameters ---------------------------------------*/ - if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx)) - { - /* Select the Counter Mode */ - tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS); - tmpcr1 |= Structure->CounterMode; - } - - if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx)) - { - /* Set the clock division */ - tmpcr1 &= ~TIM_CR1_CKD; - tmpcr1 |= (uint32_t)Structure->ClockDivision; - } - - /* Set the auto-reload preload */ - MODIFY_REG(tmpcr1, TIM_CR1_ARPE, Structure->AutoReloadPreload); - - TIMx->CR1 = tmpcr1; - - /* Set the Autoreload value */ - TIMx->ARR = (uint32_t)Structure->Period ; - - /* Set the Prescaler value */ - TIMx->PSC = Structure->Prescaler; - - if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx)) - { - /* Set the Repetition Counter value */ - TIMx->RCR = Structure->RepetitionCounter; - } - - /* Generate an update event to reload the Prescaler - and the repetition counter (only for advanced timer) value immediately */ - TIMx->EGR = TIM_EGR_UG; -} - -/** - * @brief Timer Output Compare 1 configuration - * @param TIMx to select the TIM peripheral - * @param OC_Config The output configuration structure - * @retval None - */ -static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) -{ - uint32_t tmpccmrx; - uint32_t tmpccer; - uint32_t tmpcr2; - - /* Disable the Channel 1: Reset the CC1E Bit */ - TIMx->CCER &= ~TIM_CCER_CC1E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR1 register value */ - tmpccmrx = TIMx->CCMR1; - - /* Reset the Output Compare Mode Bits */ - tmpccmrx &= ~TIM_CCMR1_OC1M; - tmpccmrx &= ~TIM_CCMR1_CC1S; - /* Select the Output Compare Mode */ - tmpccmrx |= OC_Config->OCMode; - - /* Reset the Output Polarity level */ - tmpccer &= ~TIM_CCER_CC1P; - /* Set the Output Compare Polarity */ - tmpccer |= OC_Config->OCPolarity; - - if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_1)) - { - /* Check parameters */ - assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); - - /* Reset the Output N Polarity level */ - tmpccer &= ~TIM_CCER_CC1NP; - /* Set the Output N Polarity */ - tmpccer |= OC_Config->OCNPolarity; - /* Reset the Output N State */ - tmpccer &= ~TIM_CCER_CC1NE; - } - - if (IS_TIM_BREAK_INSTANCE(TIMx)) - { - /* Check parameters */ - assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); - - /* Reset the Output Compare and Output Compare N IDLE State */ - tmpcr2 &= ~TIM_CR2_OIS1; - tmpcr2 &= ~TIM_CR2_OIS1N; - /* Set the Output Idle state */ - tmpcr2 |= OC_Config->OCIdleState; - /* Set the Output N Idle state */ - tmpcr2 |= OC_Config->OCNIdleState; - } - - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR1 = OC_Config->Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Timer Output Compare 2 configuration - * @param TIMx to select the TIM peripheral - * @param OC_Config The output configuration structure - * @retval None - */ -void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) -{ - uint32_t tmpccmrx; - uint32_t tmpccer; - uint32_t tmpcr2; - - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= ~TIM_CCER_CC2E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR1 register value */ - tmpccmrx = TIMx->CCMR1; - - /* Reset the Output Compare mode and Capture/Compare selection Bits */ - tmpccmrx &= ~TIM_CCMR1_OC2M; - tmpccmrx &= ~TIM_CCMR1_CC2S; - - /* Select the Output Compare Mode */ - tmpccmrx |= (OC_Config->OCMode << 8U); - - /* Reset the Output Polarity level */ - tmpccer &= ~TIM_CCER_CC2P; - /* Set the Output Compare Polarity */ - tmpccer |= (OC_Config->OCPolarity << 4U); - - if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_2)) - { - assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); - - /* Reset the Output N Polarity level */ - tmpccer &= ~TIM_CCER_CC2NP; - /* Set the Output N Polarity */ - tmpccer |= (OC_Config->OCNPolarity << 4U); - /* Reset the Output N State */ - tmpccer &= ~TIM_CCER_CC2NE; - - } - - if (IS_TIM_BREAK_INSTANCE(TIMx)) - { - /* Check parameters */ - assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); - - /* Reset the Output Compare and Output Compare N IDLE State */ - tmpcr2 &= ~TIM_CR2_OIS2; - tmpcr2 &= ~TIM_CR2_OIS2N; - /* Set the Output Idle state */ - tmpcr2 |= (OC_Config->OCIdleState << 2U); - /* Set the Output N Idle state */ - tmpcr2 |= (OC_Config->OCNIdleState << 2U); - } - - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR2 = OC_Config->Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Timer Output Compare 3 configuration - * @param TIMx to select the TIM peripheral - * @param OC_Config The output configuration structure - * @retval None - */ -static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) -{ - uint32_t tmpccmrx; - uint32_t tmpccer; - uint32_t tmpcr2; - - /* Disable the Channel 3: Reset the CC2E Bit */ - TIMx->CCER &= ~TIM_CCER_CC3E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR2 register value */ - tmpccmrx = TIMx->CCMR2; - - /* Reset the Output Compare mode and Capture/Compare selection Bits */ - tmpccmrx &= ~TIM_CCMR2_OC3M; - tmpccmrx &= ~TIM_CCMR2_CC3S; - /* Select the Output Compare Mode */ - tmpccmrx |= OC_Config->OCMode; - - /* Reset the Output Polarity level */ - tmpccer &= ~TIM_CCER_CC3P; - /* Set the Output Compare Polarity */ - tmpccer |= (OC_Config->OCPolarity << 8U); - - if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_3)) - { - assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); - - /* Reset the Output N Polarity level */ - tmpccer &= ~TIM_CCER_CC3NP; - /* Set the Output N Polarity */ - tmpccer |= (OC_Config->OCNPolarity << 8U); - /* Reset the Output N State */ - tmpccer &= ~TIM_CCER_CC3NE; - } - - if (IS_TIM_BREAK_INSTANCE(TIMx)) - { - /* Check parameters */ - assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); - - /* Reset the Output Compare and Output Compare N IDLE State */ - tmpcr2 &= ~TIM_CR2_OIS3; - tmpcr2 &= ~TIM_CR2_OIS3N; - /* Set the Output Idle state */ - tmpcr2 |= (OC_Config->OCIdleState << 4U); - /* Set the Output N Idle state */ - tmpcr2 |= (OC_Config->OCNIdleState << 4U); - } - - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR3 = OC_Config->Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Timer Output Compare 4 configuration - * @param TIMx to select the TIM peripheral - * @param OC_Config The output configuration structure - * @retval None - */ -static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) -{ - uint32_t tmpccmrx; - uint32_t tmpccer; - uint32_t tmpcr2; - - /* Disable the Channel 4: Reset the CC4E Bit */ - TIMx->CCER &= ~TIM_CCER_CC4E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR2 register value */ - tmpccmrx = TIMx->CCMR2; - - /* Reset the Output Compare mode and Capture/Compare selection Bits */ - tmpccmrx &= ~TIM_CCMR2_OC4M; - tmpccmrx &= ~TIM_CCMR2_CC4S; - - /* Select the Output Compare Mode */ - tmpccmrx |= (OC_Config->OCMode << 8U); - - /* Reset the Output Polarity level */ - tmpccer &= ~TIM_CCER_CC4P; - /* Set the Output Compare Polarity */ - tmpccer |= (OC_Config->OCPolarity << 12U); - - if (IS_TIM_BREAK_INSTANCE(TIMx)) - { - /* Check parameters */ - assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); - - /* Reset the Output Compare IDLE State */ - tmpcr2 &= ~TIM_CR2_OIS4; - - /* Set the Output Idle state */ - tmpcr2 |= (OC_Config->OCIdleState << 6U); - } - - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR4 = OC_Config->Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Slave Timer configuration function - * @param htim TIM handle - * @param sSlaveConfig Slave timer configuration - * @retval None - */ -static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, - TIM_SlaveConfigTypeDef *sSlaveConfig) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - uint32_t tmpccmr1; - uint32_t tmpccer; - - /* Get the TIMx SMCR register value */ - tmpsmcr = htim->Instance->SMCR; - - /* Reset the Trigger Selection Bits */ - tmpsmcr &= ~TIM_SMCR_TS; - /* Set the Input Trigger source */ - tmpsmcr |= sSlaveConfig->InputTrigger; - - /* Reset the slave mode Bits */ - tmpsmcr &= ~TIM_SMCR_SMS; - /* Set the slave mode */ - tmpsmcr |= sSlaveConfig->SlaveMode; - - /* Write to TIMx SMCR */ - htim->Instance->SMCR = tmpsmcr; - - /* Configure the trigger prescaler, filter, and polarity */ - switch (sSlaveConfig->InputTrigger) - { - case TIM_TS_ETRF: - { - /* Check the parameters */ - assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler)); - assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); - assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); - /* Configure the ETR Trigger source */ - TIM_ETR_SetConfig(htim->Instance, - sSlaveConfig->TriggerPrescaler, - sSlaveConfig->TriggerPolarity, - sSlaveConfig->TriggerFilter); - break; - } - - case TIM_TS_TI1F_ED: - { - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); - - if (sSlaveConfig->SlaveMode == TIM_SLAVEMODE_GATED) - { - return HAL_ERROR; - } - - /* Disable the Channel 1: Reset the CC1E Bit */ - tmpccer = htim->Instance->CCER; - htim->Instance->CCER &= ~TIM_CCER_CC1E; - tmpccmr1 = htim->Instance->CCMR1; - - /* Set the filter */ - tmpccmr1 &= ~TIM_CCMR1_IC1F; - tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4U); - - /* Write to TIMx CCMR1 and CCER registers */ - htim->Instance->CCMR1 = tmpccmr1; - htim->Instance->CCER = tmpccer; - break; - } - - case TIM_TS_TI1FP1: - { - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); - assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); - - /* Configure TI1 Filter and Polarity */ - TIM_TI1_ConfigInputStage(htim->Instance, - sSlaveConfig->TriggerPolarity, - sSlaveConfig->TriggerFilter); - break; - } - - case TIM_TS_TI2FP2: - { - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); - assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); - - /* Configure TI2 Filter and Polarity */ - TIM_TI2_ConfigInputStage(htim->Instance, - sSlaveConfig->TriggerPolarity, - sSlaveConfig->TriggerFilter); - break; - } - - case TIM_TS_ITR0: - case TIM_TS_ITR1: - case TIM_TS_ITR2: - case TIM_TS_ITR3: - { - /* Check the parameter */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - break; - } - - default: - status = HAL_ERROR; - break; - } - - return status; -} - -/** - * @brief Configure the TI1 as Input. - * @param TIMx to select the TIM peripheral. - * @param TIM_ICPolarity The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICSelection specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 1 is selected to be connected to IC1. - * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 1 is selected to be connected to IC2. - * @arg TIM_ICSELECTION_TRC: TIM Input 1 is selected to be connected to TRC. - * @param TIM_ICFilter Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1 - * (on channel2 path) is used as the input signal. Therefore CCMR1 must be - * protected against un-initialized filter and polarity values. - */ -void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr1; - uint32_t tmpccer; - - /* Disable the Channel 1: Reset the CC1E Bit */ - TIMx->CCER &= ~TIM_CCER_CC1E; - tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; - - /* Select the Input */ - if (IS_TIM_CC2_INSTANCE(TIMx) != RESET) - { - tmpccmr1 &= ~TIM_CCMR1_CC1S; - tmpccmr1 |= TIM_ICSelection; - } - else - { - tmpccmr1 |= TIM_CCMR1_CC1S_0; - } - - /* Set the filter */ - tmpccmr1 &= ~TIM_CCMR1_IC1F; - tmpccmr1 |= ((TIM_ICFilter << 4U) & TIM_CCMR1_IC1F); - - /* Select the Polarity and set the CC1E Bit */ - tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); - tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP)); - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the Polarity and Filter for TI1. - * @param TIMx to select the TIM peripheral. - * @param TIM_ICPolarity The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICFilter Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - */ -static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr1; - uint32_t tmpccer; - - /* Disable the Channel 1: Reset the CC1E Bit */ - tmpccer = TIMx->CCER; - TIMx->CCER &= ~TIM_CCER_CC1E; - tmpccmr1 = TIMx->CCMR1; - - /* Set the filter */ - tmpccmr1 &= ~TIM_CCMR1_IC1F; - tmpccmr1 |= (TIM_ICFilter << 4U); - - /* Select the Polarity and set the CC1E Bit */ - tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); - tmpccer |= TIM_ICPolarity; - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the TI2 as Input. - * @param TIMx to select the TIM peripheral - * @param TIM_ICPolarity The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICSelection specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 2 is selected to be connected to IC2. - * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 2 is selected to be connected to IC1. - * @arg TIM_ICSELECTION_TRC: TIM Input 2 is selected to be connected to TRC. - * @param TIM_ICFilter Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2 - * (on channel1 path) is used as the input signal. Therefore CCMR1 must be - * protected against un-initialized filter and polarity values. - */ -static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr1; - uint32_t tmpccer; - - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= ~TIM_CCER_CC2E; - tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; - - /* Select the Input */ - tmpccmr1 &= ~TIM_CCMR1_CC2S; - tmpccmr1 |= (TIM_ICSelection << 8U); - - /* Set the filter */ - tmpccmr1 &= ~TIM_CCMR1_IC2F; - tmpccmr1 |= ((TIM_ICFilter << 12U) & TIM_CCMR1_IC2F); - - /* Select the Polarity and set the CC2E Bit */ - tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); - tmpccer |= ((TIM_ICPolarity << 4U) & (TIM_CCER_CC2P | TIM_CCER_CC2NP)); - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1 ; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the Polarity and Filter for TI2. - * @param TIMx to select the TIM peripheral. - * @param TIM_ICPolarity The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICFilter Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - */ -static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr1; - uint32_t tmpccer; - - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= ~TIM_CCER_CC2E; - tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; - - /* Set the filter */ - tmpccmr1 &= ~TIM_CCMR1_IC2F; - tmpccmr1 |= (TIM_ICFilter << 12U); - - /* Select the Polarity and set the CC2E Bit */ - tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); - tmpccer |= (TIM_ICPolarity << 4U); - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1 ; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the TI3 as Input. - * @param TIMx to select the TIM peripheral - * @param TIM_ICPolarity The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICSelection specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 3 is selected to be connected to IC3. - * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 3 is selected to be connected to IC4. - * @arg TIM_ICSELECTION_TRC: TIM Input 3 is selected to be connected to TRC. - * @param TIM_ICFilter Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4 - * (on channel1 path) is used as the input signal. Therefore CCMR2 must be - * protected against un-initialized filter and polarity values. - */ -static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr2; - uint32_t tmpccer; - - /* Disable the Channel 3: Reset the CC3E Bit */ - TIMx->CCER &= ~TIM_CCER_CC3E; - tmpccmr2 = TIMx->CCMR2; - tmpccer = TIMx->CCER; - - /* Select the Input */ - tmpccmr2 &= ~TIM_CCMR2_CC3S; - tmpccmr2 |= TIM_ICSelection; - - /* Set the filter */ - tmpccmr2 &= ~TIM_CCMR2_IC3F; - tmpccmr2 |= ((TIM_ICFilter << 4U) & TIM_CCMR2_IC3F); - - /* Select the Polarity and set the CC3E Bit */ - tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP); - tmpccer |= ((TIM_ICPolarity << 8U) & (TIM_CCER_CC3P | TIM_CCER_CC3NP)); - - /* Write to TIMx CCMR2 and CCER registers */ - TIMx->CCMR2 = tmpccmr2; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the TI4 as Input. - * @param TIMx to select the TIM peripheral - * @param TIM_ICPolarity The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICSelection specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 4 is selected to be connected to IC4. - * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 4 is selected to be connected to IC3. - * @arg TIM_ICSELECTION_TRC: TIM Input 4 is selected to be connected to TRC. - * @param TIM_ICFilter Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3 - * (on channel1 path) is used as the input signal. Therefore CCMR2 must be - * protected against un-initialized filter and polarity values. - * @retval None - */ -static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr2; - uint32_t tmpccer; - - /* Disable the Channel 4: Reset the CC4E Bit */ - TIMx->CCER &= ~TIM_CCER_CC4E; - tmpccmr2 = TIMx->CCMR2; - tmpccer = TIMx->CCER; - - /* Select the Input */ - tmpccmr2 &= ~TIM_CCMR2_CC4S; - tmpccmr2 |= (TIM_ICSelection << 8U); - - /* Set the filter */ - tmpccmr2 &= ~TIM_CCMR2_IC4F; - tmpccmr2 |= ((TIM_ICFilter << 12U) & TIM_CCMR2_IC4F); - - /* Select the Polarity and set the CC4E Bit */ - tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP); - tmpccer |= ((TIM_ICPolarity << 12U) & (TIM_CCER_CC4P | TIM_CCER_CC4NP)); - - /* Write to TIMx CCMR2 and CCER registers */ - TIMx->CCMR2 = tmpccmr2; - TIMx->CCER = tmpccer ; -} - -/** - * @brief Selects the Input Trigger source - * @param TIMx to select the TIM peripheral - * @param InputTriggerSource The Input Trigger source. - * This parameter can be one of the following values: - * @arg TIM_TS_ITR0: Internal Trigger 0 - * @arg TIM_TS_ITR1: Internal Trigger 1 - * @arg TIM_TS_ITR2: Internal Trigger 2 - * @arg TIM_TS_ITR3: Internal Trigger 3 - * @arg TIM_TS_TI1F_ED: TI1 Edge Detector - * @arg TIM_TS_TI1FP1: Filtered Timer Input 1 - * @arg TIM_TS_TI2FP2: Filtered Timer Input 2 - * @arg TIM_TS_ETRF: External Trigger input - * @retval None - */ -static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource) -{ - uint32_t tmpsmcr; - - /* Get the TIMx SMCR register value */ - tmpsmcr = TIMx->SMCR; - /* Reset the TS Bits */ - tmpsmcr &= ~TIM_SMCR_TS; - /* Set the Input Trigger source and the slave mode*/ - tmpsmcr |= (InputTriggerSource | TIM_SLAVEMODE_EXTERNAL1); - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; -} -/** - * @brief Configures the TIMx External Trigger (ETR). - * @param TIMx to select the TIM peripheral - * @param TIM_ExtTRGPrescaler The external Trigger Prescaler. - * This parameter can be one of the following values: - * @arg TIM_ETRPRESCALER_DIV1: ETRP Prescaler OFF. - * @arg TIM_ETRPRESCALER_DIV2: ETRP frequency divided by 2. - * @arg TIM_ETRPRESCALER_DIV4: ETRP frequency divided by 4. - * @arg TIM_ETRPRESCALER_DIV8: ETRP frequency divided by 8. - * @param TIM_ExtTRGPolarity The external Trigger Polarity. - * This parameter can be one of the following values: - * @arg TIM_ETRPOLARITY_INVERTED: active low or falling edge active. - * @arg TIM_ETRPOLARITY_NONINVERTED: active high or rising edge active. - * @param ExtTRGFilter External Trigger Filter. - * This parameter must be a value between 0x00 and 0x0F - * @retval None - */ -void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, - uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter) -{ - uint32_t tmpsmcr; - - tmpsmcr = TIMx->SMCR; - - /* Reset the ETR Bits */ - tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); - - /* Set the Prescaler, the Filter value and the Polarity */ - tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8U))); - - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; -} - -/** - * @brief Enables or disables the TIM Capture Compare Channel x. - * @param TIMx to select the TIM peripheral - * @param Channel specifies the TIM Channel - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 - * @arg TIM_CHANNEL_2: TIM Channel 2 - * @arg TIM_CHANNEL_3: TIM Channel 3 - * @arg TIM_CHANNEL_4: TIM Channel 4 - * @param ChannelState specifies the TIM Channel CCxE bit new state. - * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_DISABLE. - * @retval None - */ -void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState) -{ - uint32_t tmp; - - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(TIMx)); - assert_param(IS_TIM_CHANNELS(Channel)); - - tmp = TIM_CCER_CC1E << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ - - /* Reset the CCxE Bit */ - TIMx->CCER &= ~tmp; - - /* Set or reset the CCxE Bit */ - TIMx->CCER |= (uint32_t)(ChannelState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ -} - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -/** - * @brief Reset interrupt callbacks to the legacy weak callbacks. - * @param htim pointer to a TIM_HandleTypeDef structure that contains - * the configuration information for TIM module. - * @retval None - */ -void TIM_ResetCallback(TIM_HandleTypeDef *htim) -{ - /* Reset the TIM callback to the legacy weak callbacks */ - htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; - htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; - htim->TriggerCallback = HAL_TIM_TriggerCallback; - htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; - htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; - htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; - htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; - htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; - htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; - htim->ErrorCallback = HAL_TIM_ErrorCallback; - htim->CommutationCallback = HAL_TIMEx_CommutCallback; - htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; - htim->BreakCallback = HAL_TIMEx_BreakCallback; -} -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - -/** - * @} - */ - -#endif /* HAL_TIM_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ +/** + ****************************************************************************** + * @file stm32f4xx_hal_tim.c + * @author MCD Application Team + * @brief TIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Timer (TIM) peripheral: + * + TIM Time Base Initialization + * + TIM Time Base Start + * + TIM Time Base Start Interruption + * + TIM Time Base Start DMA + * + TIM Output Compare/PWM Initialization + * + TIM Output Compare/PWM Channel Configuration + * + TIM Output Compare/PWM Start + * + TIM Output Compare/PWM Start Interruption + * + TIM Output Compare/PWM Start DMA + * + TIM Input Capture Initialization + * + TIM Input Capture Channel Configuration + * + TIM Input Capture Start + * + TIM Input Capture Start Interruption + * + TIM Input Capture Start DMA + * + TIM One Pulse Initialization + * + TIM One Pulse Channel Configuration + * + TIM One Pulse Start + * + TIM Encoder Interface Initialization + * + TIM Encoder Interface Start + * + TIM Encoder Interface Start Interruption + * + TIM Encoder Interface Start DMA + * + Commutation Event configuration with Interruption and DMA + * + TIM OCRef clear configuration + * + TIM External Clock configuration + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### TIMER Generic features ##### + ============================================================================== + [..] The Timer features include: + (#) 16-bit up, down, up/down auto-reload counter. + (#) 16-bit programmable prescaler allowing dividing (also on the fly) the + counter clock frequency either by any factor between 1 and 65536. + (#) Up to 4 independent channels for: + (++) Input Capture + (++) Output Compare + (++) PWM generation (Edge and Center-aligned Mode) + (++) One-pulse mode output + (#) Synchronization circuit to control the timer with external signals and to interconnect + several timers together. + (#) Supports incremental encoder for positioning purposes + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the TIM low level resources by implementing the following functions + depending on the selected feature: + (++) Time Base : HAL_TIM_Base_MspInit() + (++) Input Capture : HAL_TIM_IC_MspInit() + (++) Output Compare : HAL_TIM_OC_MspInit() + (++) PWM generation : HAL_TIM_PWM_MspInit() + (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit() + (++) Encoder mode output : HAL_TIM_Encoder_MspInit() + + (#) Initialize the TIM low level resources : + (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); + (##) TIM pins configuration + (+++) Enable the clock for the TIM GPIOs using the following function: + __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); + + (#) The external Clock can be configured, if needed (the default clock is the + internal clock from the APBx), using the following function: + HAL_TIM_ConfigClockSource, the clock configuration should be done before + any start function. + + (#) Configure the TIM in the desired functioning mode using one of the + Initialization function of this driver: + (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base + (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an + Output Compare signal. + (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a + PWM signal. + (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an + external signal. + (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer + in One Pulse Mode. + (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface. + + (#) Activate the TIM peripheral using one of the start functions depending from the feature used: + (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT() + (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT() + (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT() + (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT() + (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT() + (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT(). + + (#) The DMA Burst is managed with the two following functions: + HAL_TIM_DMABurst_WriteStart() + HAL_TIM_DMABurst_ReadStart() + + *** Callback registration *** + ============================================= + + [..] + The compilation define USE_HAL_TIM_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function HAL_TIM_RegisterCallback() to register a callback. + HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle, + the Callback ID and a pointer to the user callback function. + + [..] + Use function HAL_TIM_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + + [..] + These functions allow to register/unregister following callbacks: + (+) Base_MspInitCallback : TIM Base Msp Init Callback. + (+) Base_MspDeInitCallback : TIM Base Msp DeInit Callback. + (+) IC_MspInitCallback : TIM IC Msp Init Callback. + (+) IC_MspDeInitCallback : TIM IC Msp DeInit Callback. + (+) OC_MspInitCallback : TIM OC Msp Init Callback. + (+) OC_MspDeInitCallback : TIM OC Msp DeInit Callback. + (+) PWM_MspInitCallback : TIM PWM Msp Init Callback. + (+) PWM_MspDeInitCallback : TIM PWM Msp DeInit Callback. + (+) OnePulse_MspInitCallback : TIM One Pulse Msp Init Callback. + (+) OnePulse_MspDeInitCallback : TIM One Pulse Msp DeInit Callback. + (+) Encoder_MspInitCallback : TIM Encoder Msp Init Callback. + (+) Encoder_MspDeInitCallback : TIM Encoder Msp DeInit Callback. + (+) HallSensor_MspInitCallback : TIM Hall Sensor Msp Init Callback. + (+) HallSensor_MspDeInitCallback : TIM Hall Sensor Msp DeInit Callback. + (+) PeriodElapsedCallback : TIM Period Elapsed Callback. + (+) PeriodElapsedHalfCpltCallback : TIM Period Elapsed half complete Callback. + (+) TriggerCallback : TIM Trigger Callback. + (+) TriggerHalfCpltCallback : TIM Trigger half complete Callback. + (+) IC_CaptureCallback : TIM Input Capture Callback. + (+) IC_CaptureHalfCpltCallback : TIM Input Capture half complete Callback. + (+) OC_DelayElapsedCallback : TIM Output Compare Delay Elapsed Callback. + (+) PWM_PulseFinishedCallback : TIM PWM Pulse Finished Callback. + (+) PWM_PulseFinishedHalfCpltCallback : TIM PWM Pulse Finished half complete Callback. + (+) ErrorCallback : TIM Error Callback. + (+) CommutationCallback : TIM Commutation Callback. + (+) CommutationHalfCpltCallback : TIM Commutation half complete Callback. + (+) BreakCallback : TIM Break Callback. + + [..] +By default, after the Init and when the state is HAL_TIM_STATE_RESET +all interrupt callbacks are set to the corresponding weak functions: + examples HAL_TIM_TriggerCallback(), HAL_TIM_ErrorCallback(). + + [..] + Exception done for MspInit and MspDeInit functions that are reset to the legacy weak + functionalities in the Init / DeInit only when these callbacks are null + (not registered beforehand). If not, MspInit or MspDeInit are not null, the Init / DeInit + keep and use the user MspInit / MspDeInit callbacks(registered beforehand) + + [..] + Callbacks can be registered / unregistered in HAL_TIM_STATE_READY state only. + Exception done MspInit / MspDeInit that can be registered / unregistered + in HAL_TIM_STATE_READY or HAL_TIM_STATE_RESET state, + thus registered(user) MspInit / DeInit callbacks can be used during the Init / DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_TIM_RegisterCallback() before calling DeInit or Init function. + + [..] + When The compilation define USE_HAL_TIM_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup TIM TIM + * @brief TIM HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup TIM_Private_Functions + * @{ + */ +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource); +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, + TIM_SlaveConfigTypeDef *sSlaveConfig); +/** + * @} + */ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup TIM_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @defgroup TIM_Exported_Functions_Group1 TIM Time Base functions + * @brief Time Base functions + * +@verbatim + ============================================================================== + ##### Time Base functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM base. + (+) De-initialize the TIM base. + (+) Start the Time Base. + (+) Stop the Time Base. + (+) Start the Time Base and enable interrupt. + (+) Stop the Time Base and disable interrupt. + (+) Start the Time Base and enable DMA transfer. + (+) Stop the Time Base and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Time base Unit according to the specified + * parameters in the TIM_HandleTypeDef and initialize the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_Base_DeInit() before HAL_TIM_Base_Init() + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->Base_MspInitCallback == NULL) + { + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->Base_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Set the Time Base configuration */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM Base peripheral + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->Base_MspDeInitCallback == NULL) + { + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + } + /* DeInit the low level hardware */ + htim->Base_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Base MSP. + * @param htim TIM Base handle + * @retval None + */ +__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Base_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Base MSP. + * @param htim TIM Base handle + * @retval None + */ +__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Base_MspDeInit could be implemented in the user file + */ +} + + +/** + * @brief Starts the TIM Base generation. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in interrupt mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Enable the TIM Update interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in interrupt mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Disable the TIM Update interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in DMA mode. + * @param htim TIM Base handle + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + /* Set the TIM state */ + if (htim->State == HAL_TIM_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->State == HAL_TIM_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + htim->State = HAL_TIM_STATE_BUSY; + } + } + else + { + return HAL_ERROR; + } + + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Update DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in DMA mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE); + + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group2 TIM Output Compare functions + * @brief TIM Output Compare functions + * +@verbatim + ============================================================================== + ##### TIM Output Compare functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Output Compare. + (+) De-initialize the TIM Output Compare. + (+) Start the TIM Output Compare. + (+) Stop the TIM Output Compare. + (+) Start the TIM Output Compare and enable interrupt. + (+) Stop the TIM Output Compare and disable interrupt. + (+) Start the TIM Output Compare and enable DMA transfer. + (+) Stop the TIM Output Compare and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Output Compare according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_OC_DeInit() before HAL_TIM_OC_Init() + * @param htim TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->OC_MspInitCallback == NULL) + { + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->OC_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the Output Compare */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->OC_MspDeInitCallback == NULL) + { + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + } + /* DeInit the low level hardware */ + htim->OC_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Output Compare MSP. + * @param htim TIM Output Compare handle + * @retval None + */ +__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Output Compare MSP. + * @param htim TIM Output Compare handle + * @retval None + */ +__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Output Compare signal generation. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in interrupt mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in interrupt mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM Output Compare signal generation in DMA mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in DMA mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group3 TIM PWM functions + * @brief TIM PWM functions + * +@verbatim + ============================================================================== + ##### TIM PWM functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM PWM. + (+) De-initialize the TIM PWM. + (+) Start the TIM PWM. + (+) Stop the TIM PWM. + (+) Start the TIM PWM and enable interrupt. + (+) Stop the TIM PWM and disable interrupt. + (+) Start the TIM PWM and enable DMA transfer. + (+) Stop the TIM PWM and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM PWM Time Base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_PWM_DeInit() before HAL_TIM_PWM_Init() + * @param htim TIM PWM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->PWM_MspInitCallback == NULL) + { + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->PWM_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the PWM */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM PWM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->PWM_MspDeInitCallback == NULL) + { + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + } + /* DeInit the low level hardware */ + htim->PWM_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM PWM MSP. + * @param htim TIM PWM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM PWM MSP. + * @param htim TIM PWM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the PWM signal generation. + * @param htim TIM handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the PWM signal generation in interrupt mode. + * @param htim TIM PWM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the PWM signal generation in interrupt mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM PWM signal generation in DMA mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Capture/Compare 3 request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM PWM signal generation in DMA mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group4 TIM Input Capture functions + * @brief TIM Input Capture functions + * +@verbatim + ============================================================================== + ##### TIM Input Capture functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Input Capture. + (+) De-initialize the TIM Input Capture. + (+) Start the TIM Input Capture. + (+) Stop the TIM Input Capture. + (+) Start the TIM Input Capture and enable interrupt. + (+) Stop the TIM Input Capture and disable interrupt. + (+) Start the TIM Input Capture and enable DMA transfer. + (+) Stop the TIM Input Capture and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Input Capture Time base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_IC_DeInit() before HAL_TIM_IC_Init() + * @param htim TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->IC_MspInitCallback == NULL) + { + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->IC_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the input capture */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->IC_MspDeInitCallback == NULL) + { + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + } + /* DeInit the low level hardware */ + htim->IC_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Input Capture MSP. + * @param htim TIM Input Capture handle + * @retval None + */ +__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Input Capture MSP. + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Input Capture measurement. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Input Capture measurement. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Input Capture measurement in interrupt mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Input Capture measurement in interrupt mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM Input Capture measurement in DMA mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The destination Buffer address. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + /* Set the TIM channel state */ + if ((channel_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Input Capture measurement in DMA mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group5 TIM One Pulse functions + * @brief TIM One Pulse functions + * +@verbatim + ============================================================================== + ##### TIM One Pulse functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM One Pulse. + (+) De-initialize the TIM One Pulse. + (+) Start the TIM One Pulse. + (+) Stop the TIM One Pulse. + (+) Start the TIM One Pulse and enable interrupt. + (+) Stop the TIM One Pulse and disable interrupt. + (+) Start the TIM One Pulse and enable DMA transfer. + (+) Stop the TIM One Pulse and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM One Pulse Time Base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_OnePulse_DeInit() before HAL_TIM_OnePulse_Init() + * @note When the timer instance is initialized in One Pulse mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. + * @param htim TIM One Pulse handle + * @param OnePulseMode Select the One pulse mode. + * This parameter can be one of the following values: + * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated. + * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_OPM_MODE(OnePulseMode)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->OnePulse_MspInitCallback == NULL) + { + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->OnePulse_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OnePulse_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Configure the Time base in the One Pulse Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Reset the OPM Bit */ + htim->Instance->CR1 &= ~TIM_CR1_OPM; + + /* Configure the OPM Mode */ + htim->Instance->CR1 |= OnePulseMode; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM One Pulse + * @param htim TIM One Pulse handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->OnePulse_MspDeInitCallback == NULL) + { + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + } + /* DeInit the low level hardware */ + htim->OnePulse_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_OnePulse_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM One Pulse MSP. + * @param htim TIM One Pulse handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM One Pulse MSP. + * @param htim TIM One Pulse handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM One Pulse signal generation. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM One Pulse signal generation in interrupt mode. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation in interrupt mode. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group6 TIM Encoder functions + * @brief TIM Encoder functions + * +@verbatim + ============================================================================== + ##### TIM Encoder functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Encoder. + (+) De-initialize the TIM Encoder. + (+) Start the TIM Encoder. + (+) Stop the TIM Encoder. + (+) Start the TIM Encoder and enable interrupt. + (+) Stop the TIM Encoder and disable interrupt. + (+) Start the TIM Encoder and enable DMA transfer. + (+) Stop the TIM Encoder and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Encoder Interface and initialize the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_Encoder_DeInit() before HAL_TIM_Encoder_Init() + * @note Encoder mode and External clock mode 2 are not compatible and must not be selected together + * Ex: A call for @ref HAL_TIM_Encoder_Init will erase the settings of @ref HAL_TIM_ConfigClockSource + * using TIM_CLOCKSOURCE_ETRMODE2 and vice versa + * @note When the timer instance is initialized in Encoder mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. + * @param htim TIM Encoder Interface handle + * @param sConfig TIM Encoder Interface configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig) +{ + uint32_t tmpsmcr; + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC2Polarity)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->Encoder_MspInitCallback == NULL) + { + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->Encoder_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_Encoder_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Reset the SMS and ECE bits */ + htim->Instance->SMCR &= ~(TIM_SMCR_SMS | TIM_SMCR_ECE); + + /* Configure the Time base in the Encoder Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = htim->Instance->CCMR1; + + /* Get the TIMx CCER register value */ + tmpccer = htim->Instance->CCER; + + /* Set the encoder Mode */ + tmpsmcr |= sConfig->EncoderMode; + + /* Select the Capture Compare 1 and the Capture Compare 2 as input */ + tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S); + tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8U)); + + /* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */ + tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC); + tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F); + tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8U); + tmpccmr1 |= (sConfig->IC1Filter << 4U) | (sConfig->IC2Filter << 12U); + + /* Set the TI1 and the TI2 Polarities */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P); + tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP); + tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4U); + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Write to TIMx CCMR1 */ + htim->Instance->CCMR1 = tmpccmr1; + + /* Write to TIMx CCER */ + htim->Instance->CCER = tmpccer; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + + +/** + * @brief DeInitializes the TIM Encoder interface + * @param htim TIM Encoder Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->Encoder_MspDeInitCallback == NULL) + { + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + } + /* DeInit the low level hardware */ + htim->Encoder_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Encoder_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Encoder Interface MSP. + * @param htim TIM Encoder Interface handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Encoder Interface MSP. + * @param htim TIM Encoder Interface handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Encoder Interface. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + + /* Enable the encoder interface channels */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + } + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in interrupt mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + + /* Enable the encoder interface channels */ + /* Enable the capture compare Interrupts 1 and/or 2 */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + } + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in interrupt mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if (Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + } + else if (Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 and 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in DMA mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @param pData1 The destination Buffer address for IC1. + * @param pData2 The destination Buffer address for IC2. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, + uint32_t *pData2, uint16_t Length) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData1 == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData2 == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + else + { + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((((pData1 == NULL) || (pData2 == NULL))) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError; + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + break; + } + + default: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + break; + } + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in DMA mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if (Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + } + else if (Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 and 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ +/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management + * @brief TIM IRQ handler management + * +@verbatim + ============================================================================== + ##### IRQ handler management ##### + ============================================================================== + [..] + This section provides Timer IRQ handler function. + +@endverbatim + * @{ + */ +/** + * @brief This function handles TIM interrupts requests. + * @param htim TIM handle + * @retval None + */ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) +{ + /* Capture compare 1 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) != RESET) + { + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + /* Input capture event */ + if ((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + } + /* Capture compare 2 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + /* Input capture event */ + if ((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 3 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + /* Input capture event */ + if ((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 4 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + /* Input capture event */ + if ((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* TIM Update event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedCallback(htim); +#else + HAL_TIM_PeriodElapsedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Break input event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->BreakCallback(htim); +#else + HAL_TIMEx_BreakCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Trigger detection event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerCallback(htim); +#else + HAL_TIM_TriggerCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM commutation event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_COM) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_FLAG_COM); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationCallback(htim); +#else + HAL_TIMEx_CommutCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions + * @brief TIM Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode. + (+) Configure External Clock source. + (+) Configure Complementary channels, break features and dead time. + (+) Configure Master and the Slave synchronization. + (+) Configure the DMA Burst Mode. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the TIM Output Compare Channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim TIM Output Compare handle + * @param sConfig TIM Output Compare configuration structure + * @param Channel TIM Channels to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, + TIM_OC_InitTypeDef *sConfig, + uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_OC_MODE(sConfig->OCMode)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + + /* Process Locked */ + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 1 in Output Compare */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 2 in Output Compare */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 3 in Output Compare */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 4 in Output Compare */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + break; + } + + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Initializes the TIM Input Capture Channels according to the specified + * parameters in the TIM_IC_InitTypeDef. + * @param htim TIM IC handle + * @param sConfig TIM Input Capture configuration structure + * @param Channel TIM Channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity)); + assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter)); + + /* Process Locked */ + __HAL_LOCK(htim); + + if (Channel == TIM_CHANNEL_1) + { + /* TI1 Configuration */ + TIM_TI1_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Set the IC1PSC value */ + htim->Instance->CCMR1 |= sConfig->ICPrescaler; + } + else if (Channel == TIM_CHANNEL_2) + { + /* TI2 Configuration */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Set the IC2PSC value */ + htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8U); + } + else if (Channel == TIM_CHANNEL_3) + { + /* TI3 Configuration */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + TIM_TI3_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC3PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC; + + /* Set the IC3PSC value */ + htim->Instance->CCMR2 |= sConfig->ICPrescaler; + } + else if (Channel == TIM_CHANNEL_4) + { + /* TI4 Configuration */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + TIM_TI4_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC4PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC; + + /* Set the IC4PSC value */ + htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8U); + } + else + { + status = HAL_ERROR; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Initializes the TIM PWM channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim TIM PWM handle + * @param sConfig TIM PWM configuration structure + * @param Channel TIM Channels to be configured + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, + TIM_OC_InitTypeDef *sConfig, + uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_PWM_MODE(sConfig->OCMode)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode)); + + /* Process Locked */ + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Configure the Channel 1 in PWM mode */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel1 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Configure the Channel 2 in PWM mode */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel2 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode << 8U; + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Configure the Channel 3 in PWM mode */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel3 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Configure the Channel 4 in PWM mode */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel4 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode << 8U; + break; + } + + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Initializes the TIM One Pulse Channels according to the specified + * parameters in the TIM_OnePulse_InitTypeDef. + * @param htim TIM One Pulse handle + * @param sConfig TIM One Pulse configuration structure + * @param OutputChannel TIM output channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @param InputChannel TIM input Channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @note To output a waveform with a minimum delay user can enable the fast + * mode by calling the @ref __HAL_TIM_ENABLE_OCxFAST macro. Then CCx + * output is forced in response to the edge detection on TIx input, + * without taking in account the comparison. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, + uint32_t OutputChannel, uint32_t InputChannel) +{ + HAL_StatusTypeDef status = HAL_OK; + TIM_OC_InitTypeDef temp1; + + /* Check the parameters */ + assert_param(IS_TIM_OPM_CHANNELS(OutputChannel)); + assert_param(IS_TIM_OPM_CHANNELS(InputChannel)); + + if (OutputChannel != InputChannel) + { + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Extract the Output compare configuration from sConfig structure */ + temp1.OCMode = sConfig->OCMode; + temp1.Pulse = sConfig->Pulse; + temp1.OCPolarity = sConfig->OCPolarity; + temp1.OCNPolarity = sConfig->OCNPolarity; + temp1.OCIdleState = sConfig->OCIdleState; + temp1.OCNIdleState = sConfig->OCNIdleState; + + switch (OutputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_OC1_SetConfig(htim->Instance, &temp1); + break; + } + + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_OC2_SetConfig(htim->Instance, &temp1); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + switch (InputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1FP1; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI2FP2; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + + default: + status = HAL_ERROR; + break; + } + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return status; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @note This function should be used only when BurstLength is equal to DMA data transfer length. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) +{ + HAL_StatusTypeDef status; + + status = HAL_TIM_DMABurst_MultiWriteStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); + + + + return status; +} + +/** + * @brief Configure the DMA Burst to transfer multiple Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); + + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) + { + if ((BurstBuffer == NULL) && (BurstLength > 0U)) + { + return HAL_ERROR; + } + else + { + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; + } + } + else + { + /* nothing to do */ + } + + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_COM: + { + /* Set the DMA commutation callbacks */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_TRIGGER: + { + /* Set the DMA trigger callbacks */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM DMA Burst mode + * @param htim TIM handle + * @param BurstRequestSrc TIM DMA Request sources to disable + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA stream) */ + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + break; + } + case TIM_DMA_CC1: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + case TIM_DMA_CC2: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + case TIM_DMA_CC3: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + case TIM_DMA_CC4: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + case TIM_DMA_COM: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + break; + } + case TIM_DMA_TRIGGER: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + } + + /* Return function status */ + return status; +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @note This function should be used only when BurstLength is equal to DMA data transfer length. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) +{ + HAL_StatusTypeDef status; + + status = HAL_TIM_DMABurst_MultiReadStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); + + + return status; +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); + + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) + { + if ((BurstBuffer == NULL) && (BurstLength > 0U)) + { + return HAL_ERROR; + } + else + { + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; + } + } + else + { + /* nothing to do */ + } + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC3: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC4: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_COM: + { + /* Set the DMA commutation callbacks */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_TRIGGER: + { + /* Set the DMA trigger callbacks */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); + + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + } + + /* Return function status */ + return status; +} + +/** + * @brief Stop the DMA burst reading + * @param htim TIM handle + * @param BurstRequestSrc TIM DMA Request sources to disable. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA stream) */ + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + break; + } + case TIM_DMA_CC1: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + case TIM_DMA_CC2: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + case TIM_DMA_CC3: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + case TIM_DMA_CC4: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + case TIM_DMA_COM: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + break; + } + case TIM_DMA_TRIGGER: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + } + + /* Return function status */ + return status; +} + +/** + * @brief Generate a software event + * @param htim TIM handle + * @param EventSource specifies the event source. + * This parameter can be one of the following values: + * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source + * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source + * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source + * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source + * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source + * @arg TIM_EVENTSOURCE_COM: Timer COM event source + * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source + * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source + * @note Basic timers can only generate an update event. + * @note TIM_EVENTSOURCE_COM is relevant only with advanced timer instances. + * @note TIM_EVENTSOURCE_BREAK are relevant only for timer instances + * supporting a break input. + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_EVENT_SOURCE(EventSource)); + + /* Process Locked */ + __HAL_LOCK(htim); + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Set the event sources */ + htim->Instance->EGR = EventSource; + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configures the OCRef clear feature + * @param htim TIM handle + * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that + * contains the OCREF clear feature and parameters for the TIM peripheral. + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, + TIM_ClearInputConfigTypeDef *sClearInputConfig, + uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource)); + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + switch (sClearInputConfig->ClearInputSource) + { + case TIM_CLEARINPUTSOURCE_NONE: + { + /* Clear the OCREF clear selection bit and the the ETR Bits */ + CLEAR_BIT(htim->Instance->SMCR, (TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP)); + break; + } + + case TIM_CLEARINPUTSOURCE_ETR: + { + /* Check the parameters */ + assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity)); + assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler)); + assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter)); + + /* When OCRef clear feature is used with ETR source, ETR prescaler must be off */ + if (sClearInputConfig->ClearInputPrescaler != TIM_CLEARINPUTPRESCALER_DIV1) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + TIM_ETR_SetConfig(htim->Instance, + sClearInputConfig->ClearInputPrescaler, + sClearInputConfig->ClearInputPolarity, + sClearInputConfig->ClearInputFilter); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + switch (Channel) + { + case TIM_CHANNEL_1: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 1 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + else + { + /* Disable the OCREF clear feature for Channel 1 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + break; + } + case TIM_CHANNEL_2: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 2 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + else + { + /* Disable the OCREF clear feature for Channel 2 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + break; + } + case TIM_CHANNEL_3: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 3 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + else + { + /* Disable the OCREF clear feature for Channel 3 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + break; + } + case TIM_CHANNEL_4: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 4 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + else + { + /* Disable the OCREF clear feature for Channel 4 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + break; + } + default: + break; + } + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Configures the clock source to be used + * @param htim TIM handle + * @param sClockSourceConfig pointer to a TIM_ClockConfigTypeDef structure that + * contains the clock source information for the TIM peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource)); + + /* Reset the SMS, TS, ECE, ETPS and ETRF bits */ + tmpsmcr = htim->Instance->SMCR; + tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS); + tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); + htim->Instance->SMCR = tmpsmcr; + + switch (sClockSourceConfig->ClockSource) + { + case TIM_CLOCKSOURCE_INTERNAL: + { + assert_param(IS_TIM_INSTANCE(htim->Instance)); + break; + } + + case TIM_CLOCKSOURCE_ETRMODE1: + { + /* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + + /* Select the External clock mode1 and the ETRF trigger */ + tmpsmcr = htim->Instance->SMCR; + tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1); + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + break; + } + + case TIM_CLOCKSOURCE_ETRMODE2: + { + /* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + /* Enable the External clock mode2 */ + htim->Instance->SMCR |= TIM_SMCR_ECE; + break; + } + + case TIM_CLOCKSOURCE_TI1: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1); + break; + } + + case TIM_CLOCKSOURCE_TI2: + { + /* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI2 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI2_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2); + break; + } + + case TIM_CLOCKSOURCE_TI1ED: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED); + break; + } + + case TIM_CLOCKSOURCE_ITR0: + case TIM_CLOCKSOURCE_ITR1: + case TIM_CLOCKSOURCE_ITR2: + case TIM_CLOCKSOURCE_ITR3: + { + /* Check whether or not the timer instance supports internal trigger input */ + assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); + + TIM_ITRx_SetConfig(htim->Instance, sClockSourceConfig->ClockSource); + break; + } + + default: + status = HAL_ERROR; + break; + } + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Selects the signal connected to the TI1 input: direct from CH1_input + * or a XOR combination between CH1_input, CH2_input & CH3_input + * @param htim TIM handle. + * @param TI1_Selection Indicate whether or not channel 1 is connected to the + * output of a XOR gate. + * This parameter can be one of the following values: + * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input + * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3 + * pins are connected to the TI1 input (XOR combination) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection) +{ + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_XOR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TI1SELECTION(TI1_Selection)); + + /* Get the TIMx CR2 register value */ + tmpcr2 = htim->Instance->CR2; + + /* Reset the TI1 selection */ + tmpcr2 &= ~TIM_CR2_TI1S; + + /* Set the TI1 selection */ + tmpcr2 |= TI1_Selection; + + /* Write to TIMxCR2 */ + htim->Instance->CR2 = tmpcr2; + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode + * @param htim TIM handle. + * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the Slave mode + * (Disable, Reset, Gated, Trigger, External clock mode 1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + /* Disable Trigger Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode in interrupt mode + * @param htim TIM handle. + * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the Slave mode + * (Disable, Reset, Gated, Trigger, External clock mode 1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, + TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + /* Enable Trigger Interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Read the captured value from Capture Compare unit + * @param htim TIM handle. + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval Captured value + */ +uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpreg = 0U; + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Return the capture 1 value */ + tmpreg = htim->Instance->CCR1; + + break; + } + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Return the capture 2 value */ + tmpreg = htim->Instance->CCR2; + + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Return the capture 3 value */ + tmpreg = htim->Instance->CCR3; + + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Return the capture 4 value */ + tmpreg = htim->Instance->CCR4; + + break; + } + + default: + break; + } + + return tmpreg; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions + * @brief TIM Callbacks functions + * +@verbatim + ============================================================================== + ##### TIM Callbacks functions ##### + ============================================================================== + [..] + This section provides TIM callback functions: + (+) TIM Period elapsed callback + (+) TIM Output Compare callback + (+) TIM Input capture callback + (+) TIM Trigger callback + (+) TIM Error callback + +@endverbatim + * @{ + */ + +/** + * @brief Period elapsed callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PeriodElapsedCallback could be implemented in the user file + */ +} + +/** + * @brief Period elapsed half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PeriodElapsedHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Output Compare callback in non-blocking mode + * @param htim TIM OC handle + * @retval None + */ +__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture callback in non-blocking mode + * @param htim TIM IC handle + * @retval None + */ +__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_CaptureCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture half complete callback in non-blocking mode + * @param htim TIM IC handle + * @retval None + */ +__weak void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_CaptureHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief PWM Pulse finished callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file + */ +} + +/** + * @brief PWM Pulse finished half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_PulseFinishedHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Trigger detection callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_TriggerCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Trigger detection half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_TriggerHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Timer error callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_ErrorCallback could be implemented in the user file + */ +} + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User TIM callback to be used instead of the weak predefined callback + * @param htim tim handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID + * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID + * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID + * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID + * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID + * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID + * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID + * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID + * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID + * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID + * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID + * @param pCallback pointer to the callback function + * @retval status + */ +HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, + pTIM_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(htim); + + if (htim->State == HAL_TIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = pCallback; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_CB_ID : + htim->PeriodElapsedCallback = pCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : + htim->PeriodElapsedHalfCpltCallback = pCallback; + break; + + case HAL_TIM_TRIGGER_CB_ID : + htim->TriggerCallback = pCallback; + break; + + case HAL_TIM_TRIGGER_HALF_CB_ID : + htim->TriggerHalfCpltCallback = pCallback; + break; + + case HAL_TIM_IC_CAPTURE_CB_ID : + htim->IC_CaptureCallback = pCallback; + break; + + case HAL_TIM_IC_CAPTURE_HALF_CB_ID : + htim->IC_CaptureHalfCpltCallback = pCallback; + break; + + case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : + htim->OC_DelayElapsedCallback = pCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : + htim->PWM_PulseFinishedCallback = pCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : + htim->PWM_PulseFinishedHalfCpltCallback = pCallback; + break; + + case HAL_TIM_ERROR_CB_ID : + htim->ErrorCallback = pCallback; + break; + + case HAL_TIM_COMMUTATION_CB_ID : + htim->CommutationCallback = pCallback; + break; + + case HAL_TIM_COMMUTATION_HALF_CB_ID : + htim->CommutationHalfCpltCallback = pCallback; + break; + + case HAL_TIM_BREAK_CB_ID : + htim->BreakCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (htim->State == HAL_TIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = pCallback; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Unregister a TIM callback + * TIM callback is redirected to the weak predefined callback + * @param htim tim handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID + * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID + * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID + * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID + * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID + * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID + * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID + * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID + * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID + * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID + * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(htim); + + if (htim->State == HAL_TIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + /* Legacy weak Base MspInit Callback */ + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + /* Legacy weak Base Msp DeInit Callback */ + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + /* Legacy weak IC Msp Init Callback */ + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + /* Legacy weak IC Msp DeInit Callback */ + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + /* Legacy weak OC Msp Init Callback */ + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + /* Legacy weak OC Msp DeInit Callback */ + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + /* Legacy weak PWM Msp Init Callback */ + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + /* Legacy weak PWM Msp DeInit Callback */ + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + /* Legacy weak One Pulse Msp Init Callback */ + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + /* Legacy weak One Pulse Msp DeInit Callback */ + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + /* Legacy weak Encoder Msp Init Callback */ + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + /* Legacy weak Encoder Msp DeInit Callback */ + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + /* Legacy weak Hall Sensor Msp Init Callback */ + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + /* Legacy weak Hall Sensor Msp DeInit Callback */ + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; + break; + + case HAL_TIM_PERIOD_ELAPSED_CB_ID : + /* Legacy weak Period Elapsed Callback */ + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : + /* Legacy weak Period Elapsed half complete Callback */ + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; + break; + + case HAL_TIM_TRIGGER_CB_ID : + /* Legacy weak Trigger Callback */ + htim->TriggerCallback = HAL_TIM_TriggerCallback; + break; + + case HAL_TIM_TRIGGER_HALF_CB_ID : + /* Legacy weak Trigger half complete Callback */ + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; + break; + + case HAL_TIM_IC_CAPTURE_CB_ID : + /* Legacy weak IC Capture Callback */ + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; + break; + + case HAL_TIM_IC_CAPTURE_HALF_CB_ID : + /* Legacy weak IC Capture half complete Callback */ + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; + break; + + case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : + /* Legacy weak OC Delay Elapsed Callback */ + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : + /* Legacy weak PWM Pulse Finished Callback */ + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : + /* Legacy weak PWM Pulse Finished half complete Callback */ + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; + break; + + case HAL_TIM_ERROR_CB_ID : + /* Legacy weak Error Callback */ + htim->ErrorCallback = HAL_TIM_ErrorCallback; + break; + + case HAL_TIM_COMMUTATION_CB_ID : + /* Legacy weak Commutation Callback */ + htim->CommutationCallback = HAL_TIMEx_CommutCallback; + break; + + case HAL_TIM_COMMUTATION_HALF_CB_ID : + /* Legacy weak Commutation half complete Callback */ + htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; + break; + + case HAL_TIM_BREAK_CB_ID : + /* Legacy weak Break Callback */ + htim->BreakCallback = HAL_TIMEx_BreakCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (htim->State == HAL_TIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + /* Legacy weak Base MspInit Callback */ + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + /* Legacy weak Base Msp DeInit Callback */ + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + /* Legacy weak IC Msp Init Callback */ + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + /* Legacy weak IC Msp DeInit Callback */ + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + /* Legacy weak OC Msp Init Callback */ + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + /* Legacy weak OC Msp DeInit Callback */ + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + /* Legacy weak PWM Msp Init Callback */ + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + /* Legacy weak PWM Msp DeInit Callback */ + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + /* Legacy weak One Pulse Msp Init Callback */ + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + /* Legacy weak One Pulse Msp DeInit Callback */ + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + /* Legacy weak Encoder Msp Init Callback */ + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + /* Legacy weak Encoder Msp DeInit Callback */ + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + /* Legacy weak Hall Sensor Msp Init Callback */ + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + /* Legacy weak Hall Sensor Msp DeInit Callback */ + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return status; +} +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions + * @brief TIM Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the TIM Base handle state. + * @param htim TIM Base handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM OC handle state. + * @param htim TIM Output Compare handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM PWM handle state. + * @param htim TIM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Input Capture handle state. + * @param htim TIM IC handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM One Pulse Mode handle state. + * @param htim TIM OPM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Encoder Mode handle state. + * @param htim TIM Encoder Interface handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Encoder Mode handle state. + * @param htim TIM handle + * @retval Active channel + */ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim) +{ + return htim->Channel; +} + +/** + * @brief Return actual state of the TIM channel. + * @param htim TIM handle + * @param Channel TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 + * @arg TIM_CHANNEL_6: TIM Channel 6 + * @retval TIM Channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + + return channel_state; +} + +/** + * @brief Return actual state of a DMA burst operation. + * @param htim TIM handle + * @retval DMA burst state + */ +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + + return htim->DMABurstState; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_Functions TIM Private Functions + * @{ + */ + +/** + * @brief TIM DMA error callback + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMAError(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->ErrorCallback(htim); +#else + HAL_TIM_ErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Delay Pulse complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Delay Pulse half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedHalfCpltCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Capture complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Capture half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureHalfCpltCallback(htim); +#else + HAL_TIM_IC_CaptureHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Period Elapse complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (htim->hdma[TIM_DMA_ID_UPDATE]->Init.Mode == DMA_NORMAL) + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedCallback(htim); +#else + HAL_TIM_PeriodElapsedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Period Elapse half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedHalfCpltCallback(htim); +#else + HAL_TIM_PeriodElapsedHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Trigger callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (htim->hdma[TIM_DMA_ID_TRIGGER]->Init.Mode == DMA_NORMAL) + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerCallback(htim); +#else + HAL_TIM_TriggerCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Trigger half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerHalfCpltCallback(htim); +#else + HAL_TIM_TriggerHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief Time Base configuration + * @param TIMx TIM peripheral + * @param Structure TIM Base configuration structure + * @retval None + */ +void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure) +{ + uint32_t tmpcr1; + tmpcr1 = TIMx->CR1; + + /* Set TIM Time Base Unit parameters ---------------------------------------*/ + if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx)) + { + /* Select the Counter Mode */ + tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS); + tmpcr1 |= Structure->CounterMode; + } + + if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx)) + { + /* Set the clock division */ + tmpcr1 &= ~TIM_CR1_CKD; + tmpcr1 |= (uint32_t)Structure->ClockDivision; + } + + /* Set the auto-reload preload */ + MODIFY_REG(tmpcr1, TIM_CR1_ARPE, Structure->AutoReloadPreload); + + TIMx->CR1 = tmpcr1; + + /* Set the Autoreload value */ + TIMx->ARR = (uint32_t)Structure->Period ; + + /* Set the Prescaler value */ + TIMx->PSC = Structure->Prescaler; + + if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx)) + { + /* Set the Repetition Counter value */ + TIMx->RCR = Structure->RepetitionCounter; + } + + /* Generate an update event to reload the Prescaler + and the repetition counter (only for advanced timer) value immediately */ + TIMx->EGR = TIM_EGR_UG; +} + +/** + * @brief Timer Output Compare 1 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= ~TIM_CCER_CC1E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~TIM_CCMR1_OC1M; + tmpccmrx &= ~TIM_CCMR1_CC1S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC1P; + /* Set the Output Compare Polarity */ + tmpccer |= OC_Config->OCPolarity; + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_1)) + { + /* Check parameters */ + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC1NP; + /* Set the Output N Polarity */ + tmpccer |= OC_Config->OCNPolarity; + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC1NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS1; + tmpcr2 &= ~TIM_CR2_OIS1N; + /* Set the Output Idle state */ + tmpcr2 |= OC_Config->OCIdleState; + /* Set the Output N Idle state */ + tmpcr2 |= OC_Config->OCNIdleState; + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR1 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 2 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR1_OC2M; + tmpccmrx &= ~TIM_CCMR1_CC2S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC2P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 4U); + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_2)) + { + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC2NP; + /* Set the Output N Polarity */ + tmpccer |= (OC_Config->OCNPolarity << 4U); + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC2NE; + + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS2; + tmpcr2 &= ~TIM_CR2_OIS2N; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 2U); + /* Set the Output N Idle state */ + tmpcr2 |= (OC_Config->OCNIdleState << 2U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR2 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 3 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 3: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC3E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC3M; + tmpccmrx &= ~TIM_CCMR2_CC3S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC3P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 8U); + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_3)) + { + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC3NP; + /* Set the Output N Polarity */ + tmpccer |= (OC_Config->OCNPolarity << 8U); + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC3NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS3; + tmpcr2 &= ~TIM_CR2_OIS3N; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 4U); + /* Set the Output N Idle state */ + tmpcr2 |= (OC_Config->OCNIdleState << 4U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR3 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 4 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= ~TIM_CCER_CC4E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC4M; + tmpccmrx &= ~TIM_CCMR2_CC4S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC4P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 12U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS4; + + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 6U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR4 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Slave Timer configuration function + * @param htim TIM handle + * @param sSlaveConfig Slave timer configuration + * @retval None + */ +static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, + TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Reset the Trigger Selection Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source */ + tmpsmcr |= sSlaveConfig->InputTrigger; + + /* Reset the slave mode Bits */ + tmpsmcr &= ~TIM_SMCR_SMS; + /* Set the slave mode */ + tmpsmcr |= sSlaveConfig->SlaveMode; + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Configure the trigger prescaler, filter, and polarity */ + switch (sSlaveConfig->InputTrigger) + { + case TIM_TS_ETRF: + { + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + /* Configure the ETR Trigger source */ + TIM_ETR_SetConfig(htim->Instance, + sSlaveConfig->TriggerPrescaler, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_TI1F_ED: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + if (sSlaveConfig->SlaveMode == TIM_SLAVEMODE_GATED) + { + return HAL_ERROR; + } + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = htim->Instance->CCER; + htim->Instance->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = htim->Instance->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4U); + + /* Write to TIMx CCMR1 and CCER registers */ + htim->Instance->CCMR1 = tmpccmr1; + htim->Instance->CCER = tmpccer; + break; + } + + case TIM_TS_TI1FP1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI1 Filter and Polarity */ + TIM_TI1_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_TI2FP2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI2 Filter and Polarity */ + TIM_TI2_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_ITR0: + case TIM_TS_ITR1: + case TIM_TS_ITR2: + case TIM_TS_ITR3: + { + /* Check the parameter */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + break; + } + + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Configure the TI1 as Input. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 1 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 1 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_TRC: TIM Input 1 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1 + * (on channel2 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Select the Input */ + if (IS_TIM_CC2_INSTANCE(TIMx) != RESET) + { + tmpccmr1 &= ~TIM_CCMR1_CC1S; + tmpccmr1 |= TIM_ICSelection; + } + else + { + tmpccmr1 |= TIM_CCMR1_CC1S_0; + } + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((TIM_ICFilter << 4U) & TIM_CCMR1_IC1F); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI1. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= (TIM_ICFilter << 4U); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= TIM_ICPolarity; + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI2 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 2 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 2 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_TRC: TIM Input 2 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2 + * (on channel1 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Select the Input */ + tmpccmr1 &= ~TIM_CCMR1_CC2S; + tmpccmr1 |= (TIM_ICSelection << 8U); + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= ((TIM_ICFilter << 12U) & TIM_CCMR1_IC2F); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= ((TIM_ICPolarity << 4U) & (TIM_CCER_CC2P | TIM_CCER_CC2NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI2. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= (TIM_ICFilter << 12U); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= (TIM_ICPolarity << 4U); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI3 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 3 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 3 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_TRC: TIM Input 3 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + + /* Disable the Channel 3: Reset the CC3E Bit */ + TIMx->CCER &= ~TIM_CCER_CC3E; + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC3S; + tmpccmr2 |= TIM_ICSelection; + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC3F; + tmpccmr2 |= ((TIM_ICFilter << 4U) & TIM_CCMR2_IC3F); + + /* Select the Polarity and set the CC3E Bit */ + tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP); + tmpccer |= ((TIM_ICPolarity << 8U) & (TIM_CCER_CC3P | TIM_CCER_CC3NP)); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI4 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 4 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 4 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_TRC: TIM Input 4 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + * @retval None + */ +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= ~TIM_CCER_CC4E; + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC4S; + tmpccmr2 |= (TIM_ICSelection << 8U); + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC4F; + tmpccmr2 |= ((TIM_ICFilter << 12U) & TIM_CCMR2_IC4F); + + /* Select the Polarity and set the CC4E Bit */ + tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP); + tmpccer |= ((TIM_ICPolarity << 12U) & (TIM_CCER_CC4P | TIM_CCER_CC4NP)); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer ; +} + +/** + * @brief Selects the Input Trigger source + * @param TIMx to select the TIM peripheral + * @param InputTriggerSource The Input Trigger source. + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal Trigger 0 + * @arg TIM_TS_ITR1: Internal Trigger 1 + * @arg TIM_TS_ITR2: Internal Trigger 2 + * @arg TIM_TS_ITR3: Internal Trigger 3 + * @arg TIM_TS_TI1F_ED: TI1 Edge Detector + * @arg TIM_TS_TI1FP1: Filtered Timer Input 1 + * @arg TIM_TS_TI2FP2: Filtered Timer Input 2 + * @arg TIM_TS_ETRF: External Trigger input + * @retval None + */ +static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource) +{ + uint32_t tmpsmcr; + + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + /* Reset the TS Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source and the slave mode*/ + tmpsmcr |= (InputTriggerSource | TIM_SLAVEMODE_EXTERNAL1); + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} +/** + * @brief Configures the TIMx External Trigger (ETR). + * @param TIMx to select the TIM peripheral + * @param TIM_ExtTRGPrescaler The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ETRPRESCALER_DIV1: ETRP Prescaler OFF. + * @arg TIM_ETRPRESCALER_DIV2: ETRP frequency divided by 2. + * @arg TIM_ETRPRESCALER_DIV4: ETRP frequency divided by 4. + * @arg TIM_ETRPRESCALER_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ETRPOLARITY_INVERTED: active low or falling edge active. + * @arg TIM_ETRPOLARITY_NONINVERTED: active high or rising edge active. + * @param ExtTRGFilter External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, + uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter) +{ + uint32_t tmpsmcr; + + tmpsmcr = TIMx->SMCR; + + /* Reset the ETR Bits */ + tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); + + /* Set the Prescaler, the Filter value and the Polarity */ + tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8U))); + + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel x. + * @param TIMx to select the TIM peripheral + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @param ChannelState specifies the TIM Channel CCxE bit new state. + * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_DISABLE. + * @retval None + */ +void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(TIMx)); + assert_param(IS_TIM_CHANNELS(Channel)); + + tmp = TIM_CCER_CC1E << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ + + /* Reset the CCxE Bit */ + TIMx->CCER &= ~tmp; + + /* Set or reset the CCxE Bit */ + TIMx->CCER |= (uint32_t)(ChannelState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ +} + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief Reset interrupt callbacks to the legacy weak callbacks. + * @param htim pointer to a TIM_HandleTypeDef structure that contains + * the configuration information for TIM module. + * @retval None + */ +void TIM_ResetCallback(TIM_HandleTypeDef *htim) +{ + /* Reset the TIM callback to the legacy weak callbacks */ + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; + htim->TriggerCallback = HAL_TIM_TriggerCallback; + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; + htim->ErrorCallback = HAL_TIM_ErrorCallback; + htim->CommutationCallback = HAL_TIMEx_CommutCallback; + htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; + htim->BreakCallback = HAL_TIMEx_BreakCallback; +} +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Drivers/stm32f4xx_hal_tim.h b/libs/hal/stm32f4xx_hal_tim.h similarity index 98% rename from Drivers/stm32f4xx_hal_tim.h rename to libs/hal/stm32f4xx_hal_tim.h index e3cc450..8c81414 100644 --- a/Drivers/stm32f4xx_hal_tim.h +++ b/libs/hal/stm32f4xx_hal_tim.h @@ -1,2146 +1,2146 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_tim.h - * @author MCD Application Team - * @brief Header file of TIM HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_TIM_H -#define STM32F4xx_HAL_TIM_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup TIM - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup TIM_Exported_Types TIM Exported Types - * @{ - */ - -/** - * @brief TIM Time base Configuration Structure definition - */ -typedef struct -{ - uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ - - uint32_t CounterMode; /*!< Specifies the counter mode. - This parameter can be a value of @ref TIM_Counter_Mode */ - - uint32_t Period; /*!< Specifies the period value to be loaded into the active - Auto-Reload Register at the next update event. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ - - uint32_t ClockDivision; /*!< Specifies the clock division. - This parameter can be a value of @ref TIM_ClockDivision */ - - uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter - reaches zero, an update event is generated and counting restarts - from the RCR value (N). - This means in PWM mode that (N+1) corresponds to: - - the number of PWM periods in edge-aligned mode - - the number of half PWM period in center-aligned mode - GP timers: this parameter must be a number between Min_Data = 0x00 and - Max_Data = 0xFF. - Advanced timers: this parameter must be a number between Min_Data = 0x0000 and - Max_Data = 0xFFFF. */ - - uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload. - This parameter can be a value of @ref TIM_AutoReloadPreload */ -} TIM_Base_InitTypeDef; - -/** - * @brief TIM Output Compare Configuration Structure definition - */ -typedef struct -{ - uint32_t OCMode; /*!< Specifies the TIM mode. - This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ - - uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ - - uint32_t OCPolarity; /*!< Specifies the output polarity. - This parameter can be a value of @ref TIM_Output_Compare_Polarity */ - - uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. - This parameter can be a value of @ref TIM_Output_Compare_N_Polarity - @note This parameter is valid only for timer instances supporting break feature. */ - - uint32_t OCFastMode; /*!< Specifies the Fast mode state. - This parameter can be a value of @ref TIM_Output_Fast_State - @note This parameter is valid only in PWM1 and PWM2 mode. */ - - - uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_Idle_State - @note This parameter is valid only for timer instances supporting break feature. */ - - uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State - @note This parameter is valid only for timer instances supporting break feature. */ -} TIM_OC_InitTypeDef; - -/** - * @brief TIM One Pulse Mode Configuration Structure definition - */ -typedef struct -{ - uint32_t OCMode; /*!< Specifies the TIM mode. - This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ - - uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ - - uint32_t OCPolarity; /*!< Specifies the output polarity. - This parameter can be a value of @ref TIM_Output_Compare_Polarity */ - - uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. - This parameter can be a value of @ref TIM_Output_Compare_N_Polarity - @note This parameter is valid only for timer instances supporting break feature. */ - - uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_Idle_State - @note This parameter is valid only for timer instances supporting break feature. */ - - uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State - @note This parameter is valid only for timer instances supporting break feature. */ - - uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ - - uint32_t ICSelection; /*!< Specifies the input. - This parameter can be a value of @ref TIM_Input_Capture_Selection */ - - uint32_t ICFilter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -} TIM_OnePulse_InitTypeDef; - -/** - * @brief TIM Input Capture Configuration Structure definition - */ -typedef struct -{ - uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ - - uint32_t ICSelection; /*!< Specifies the input. - This parameter can be a value of @ref TIM_Input_Capture_Selection */ - - uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ - - uint32_t ICFilter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -} TIM_IC_InitTypeDef; - -/** - * @brief TIM Encoder Configuration Structure definition - */ -typedef struct -{ - uint32_t EncoderMode; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Encoder_Mode */ - - uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ - - uint32_t IC1Selection; /*!< Specifies the input. - This parameter can be a value of @ref TIM_Input_Capture_Selection */ - - uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ - - uint32_t IC1Filter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ - - uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ - - uint32_t IC2Selection; /*!< Specifies the input. - This parameter can be a value of @ref TIM_Input_Capture_Selection */ - - uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ - - uint32_t IC2Filter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -} TIM_Encoder_InitTypeDef; - -/** - * @brief Clock Configuration Handle Structure definition - */ -typedef struct -{ - uint32_t ClockSource; /*!< TIM clock sources - This parameter can be a value of @ref TIM_Clock_Source */ - uint32_t ClockPolarity; /*!< TIM clock polarity - This parameter can be a value of @ref TIM_Clock_Polarity */ - uint32_t ClockPrescaler; /*!< TIM clock prescaler - This parameter can be a value of @ref TIM_Clock_Prescaler */ - uint32_t ClockFilter; /*!< TIM clock filter - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -} TIM_ClockConfigTypeDef; - -/** - * @brief TIM Clear Input Configuration Handle Structure definition - */ -typedef struct -{ - uint32_t ClearInputState; /*!< TIM clear Input state - This parameter can be ENABLE or DISABLE */ - uint32_t ClearInputSource; /*!< TIM clear Input sources - This parameter can be a value of @ref TIM_ClearInput_Source */ - uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity - This parameter can be a value of @ref TIM_ClearInput_Polarity */ - uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler - This parameter must be 0: When OCRef clear feature is used with ETR source, - ETR prescaler must be off */ - uint32_t ClearInputFilter; /*!< TIM Clear Input filter - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -} TIM_ClearInputConfigTypeDef; - -/** - * @brief TIM Master configuration Structure definition - */ -typedef struct -{ - uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection - This parameter can be a value of @ref TIM_Master_Mode_Selection */ - uint32_t MasterSlaveMode; /*!< Master/slave mode selection - This parameter can be a value of @ref TIM_Master_Slave_Mode - @note When the Master/slave mode is enabled, the effect of - an event on the trigger input (TRGI) is delayed to allow a - perfect synchronization between the current timer and its - slaves (through TRGO). It is not mandatory in case of timer - synchronization mode. */ -} TIM_MasterConfigTypeDef; - -/** - * @brief TIM Slave configuration Structure definition - */ -typedef struct -{ - uint32_t SlaveMode; /*!< Slave mode selection - This parameter can be a value of @ref TIM_Slave_Mode */ - uint32_t InputTrigger; /*!< Input Trigger source - This parameter can be a value of @ref TIM_Trigger_Selection */ - uint32_t TriggerPolarity; /*!< Input Trigger polarity - This parameter can be a value of @ref TIM_Trigger_Polarity */ - uint32_t TriggerPrescaler; /*!< Input trigger prescaler - This parameter can be a value of @ref TIM_Trigger_Prescaler */ - uint32_t TriggerFilter; /*!< Input trigger filter - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ - -} TIM_SlaveConfigTypeDef; - -/** - * @brief TIM Break input(s) and Dead time configuration Structure definition - * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable - * filter and polarity. - */ -typedef struct -{ - uint32_t OffStateRunMode; /*!< TIM off state in run mode, This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */ - - uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode, This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */ - - uint32_t LockLevel; /*!< TIM Lock level, This parameter can be a value of @ref TIM_Lock_level */ - - uint32_t DeadTime; /*!< TIM dead Time, This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */ - - uint32_t BreakState; /*!< TIM Break State, This parameter can be a value of @ref TIM_Break_Input_enable_disable */ - - uint32_t BreakPolarity; /*!< TIM Break input polarity, This parameter can be a value of @ref TIM_Break_Polarity */ - - uint32_t BreakFilter; /*!< Specifies the break input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ - - uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state, This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ - -} TIM_BreakDeadTimeConfigTypeDef; - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */ - HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ - HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */ - HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ - HAL_TIM_STATE_ERROR = 0x04U /*!< Reception process is ongoing */ -} HAL_TIM_StateTypeDef; - -/** - * @brief TIM Channel States definition - */ -typedef enum -{ - HAL_TIM_CHANNEL_STATE_RESET = 0x00U, /*!< TIM Channel initial state */ - HAL_TIM_CHANNEL_STATE_READY = 0x01U, /*!< TIM Channel ready for use */ - HAL_TIM_CHANNEL_STATE_BUSY = 0x02U, /*!< An internal process is ongoing on the TIM channel */ -} HAL_TIM_ChannelStateTypeDef; - -/** - * @brief DMA Burst States definition - */ -typedef enum -{ - HAL_DMA_BURST_STATE_RESET = 0x00U, /*!< DMA Burst initial state */ - HAL_DMA_BURST_STATE_READY = 0x01U, /*!< DMA Burst ready for use */ - HAL_DMA_BURST_STATE_BUSY = 0x02U, /*!< Ongoing DMA Burst */ -} HAL_TIM_DMABurstStateTypeDef; - -/** - * @brief HAL Active channel structures definition - */ -typedef enum -{ - HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */ - HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */ - HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */ - HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */ - HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00U /*!< All active channels cleared */ -} HAL_TIM_ActiveChannel; - -/** - * @brief TIM Time Base Handle Structure definition - */ -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -typedef struct __TIM_HandleTypeDef -#else -typedef struct -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -{ - TIM_TypeDef *Instance; /*!< Register base address */ - TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */ - HAL_TIM_ActiveChannel Channel; /*!< Active channel */ - DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array - This array is accessed by a @ref DMA_Handle_index */ - HAL_LockTypeDef Lock; /*!< Locking object */ - __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */ - __IO HAL_TIM_ChannelStateTypeDef ChannelState[4]; /*!< TIM channel operation state */ - __IO HAL_TIM_ChannelStateTypeDef ChannelNState[4]; /*!< TIM complementary channel operation state */ - __IO HAL_TIM_DMABurstStateTypeDef DMABurstState; /*!< DMA burst operation state */ - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - void (* Base_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp Init Callback */ - void (* Base_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp DeInit Callback */ - void (* IC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp Init Callback */ - void (* IC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp DeInit Callback */ - void (* OC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp Init Callback */ - void (* OC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp DeInit Callback */ - void (* PWM_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp Init Callback */ - void (* PWM_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp DeInit Callback */ - void (* OnePulse_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp Init Callback */ - void (* OnePulse_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp DeInit Callback */ - void (* Encoder_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp Init Callback */ - void (* Encoder_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp DeInit Callback */ - void (* HallSensor_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp Init Callback */ - void (* HallSensor_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp DeInit Callback */ - void (* PeriodElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed Callback */ - void (* PeriodElapsedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed half complete Callback */ - void (* TriggerCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger Callback */ - void (* TriggerHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger half complete Callback */ - void (* IC_CaptureCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture Callback */ - void (* IC_CaptureHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture half complete Callback */ - void (* OC_DelayElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Output Compare Delay Elapsed Callback */ - void (* PWM_PulseFinishedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished Callback */ - void (* PWM_PulseFinishedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished half complete Callback */ - void (* ErrorCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Error Callback */ - void (* CommutationCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation Callback */ - void (* CommutationHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation half complete Callback */ - void (* BreakCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break Callback */ -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} TIM_HandleTypeDef; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -/** - * @brief HAL TIM Callback ID enumeration definition - */ -typedef enum -{ - HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U /*!< TIM Base MspInit Callback ID */ - , HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U /*!< TIM Base MspDeInit Callback ID */ - , HAL_TIM_IC_MSPINIT_CB_ID = 0x02U /*!< TIM IC MspInit Callback ID */ - , HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U /*!< TIM IC MspDeInit Callback ID */ - , HAL_TIM_OC_MSPINIT_CB_ID = 0x04U /*!< TIM OC MspInit Callback ID */ - , HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U /*!< TIM OC MspDeInit Callback ID */ - , HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U /*!< TIM PWM MspInit Callback ID */ - , HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U /*!< TIM PWM MspDeInit Callback ID */ - , HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U /*!< TIM One Pulse MspInit Callback ID */ - , HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U /*!< TIM One Pulse MspDeInit Callback ID */ - , HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU /*!< TIM Encoder MspInit Callback ID */ - , HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU /*!< TIM Encoder MspDeInit Callback ID */ - , HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU /*!< TIM Hall Sensor MspDeInit Callback ID */ - , HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU /*!< TIM Hall Sensor MspDeInit Callback ID */ - , HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU /*!< TIM Period Elapsed Callback ID */ - , HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID = 0x0FU /*!< TIM Period Elapsed half complete Callback ID */ - , HAL_TIM_TRIGGER_CB_ID = 0x10U /*!< TIM Trigger Callback ID */ - , HAL_TIM_TRIGGER_HALF_CB_ID = 0x11U /*!< TIM Trigger half complete Callback ID */ - - , HAL_TIM_IC_CAPTURE_CB_ID = 0x12U /*!< TIM Input Capture Callback ID */ - , HAL_TIM_IC_CAPTURE_HALF_CB_ID = 0x13U /*!< TIM Input Capture half complete Callback ID */ - , HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x14U /*!< TIM Output Compare Delay Elapsed Callback ID */ - , HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x15U /*!< TIM PWM Pulse Finished Callback ID */ - , HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U /*!< TIM PWM Pulse Finished half complete Callback ID */ - , HAL_TIM_ERROR_CB_ID = 0x17U /*!< TIM Error Callback ID */ - , HAL_TIM_COMMUTATION_CB_ID = 0x18U /*!< TIM Commutation Callback ID */ - , HAL_TIM_COMMUTATION_HALF_CB_ID = 0x19U /*!< TIM Commutation half complete Callback ID */ - , HAL_TIM_BREAK_CB_ID = 0x1AU /*!< TIM Break Callback ID */ -} HAL_TIM_CallbackIDTypeDef; - -/** - * @brief HAL TIM Callback pointer definition - */ -typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to the TIM callback function */ - -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - -/** - * @} - */ -/* End of exported types -----------------------------------------------------*/ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup TIM_Exported_Constants TIM Exported Constants - * @{ - */ - -/** @defgroup TIM_ClearInput_Source TIM Clear Input Source - * @{ - */ -#define TIM_CLEARINPUTSOURCE_NONE 0x00000000U /*!< OCREF_CLR is disabled */ -#define TIM_CLEARINPUTSOURCE_ETR 0x00000001U /*!< OCREF_CLR is connected to ETRF input */ -/** - * @} - */ - -/** @defgroup TIM_DMA_Base_address TIM DMA Base Address - * @{ - */ -#define TIM_DMABASE_CR1 0x00000000U -#define TIM_DMABASE_CR2 0x00000001U -#define TIM_DMABASE_SMCR 0x00000002U -#define TIM_DMABASE_DIER 0x00000003U -#define TIM_DMABASE_SR 0x00000004U -#define TIM_DMABASE_EGR 0x00000005U -#define TIM_DMABASE_CCMR1 0x00000006U -#define TIM_DMABASE_CCMR2 0x00000007U -#define TIM_DMABASE_CCER 0x00000008U -#define TIM_DMABASE_CNT 0x00000009U -#define TIM_DMABASE_PSC 0x0000000AU -#define TIM_DMABASE_ARR 0x0000000BU -#define TIM_DMABASE_RCR 0x0000000CU -#define TIM_DMABASE_CCR1 0x0000000DU -#define TIM_DMABASE_CCR2 0x0000000EU -#define TIM_DMABASE_CCR3 0x0000000FU -#define TIM_DMABASE_CCR4 0x00000010U -#define TIM_DMABASE_BDTR 0x00000011U -#define TIM_DMABASE_DCR 0x00000012U -#define TIM_DMABASE_DMAR 0x00000013U -/** - * @} - */ - -/** @defgroup TIM_Event_Source TIM Event Source - * @{ - */ -#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */ -#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1 */ -#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2 */ -#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3 */ -#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4 */ -#define TIM_EVENTSOURCE_COM TIM_EGR_COMG /*!< A commutation event is generated */ -#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG /*!< A trigger event is generated */ -#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG /*!< A break event is generated */ -/** - * @} - */ - -/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel polarity - * @{ - */ -#define TIM_INPUTCHANNELPOLARITY_RISING 0x00000000U /*!< Polarity for TIx source */ -#define TIM_INPUTCHANNELPOLARITY_FALLING TIM_CCER_CC1P /*!< Polarity for TIx source */ -#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */ -/** - * @} - */ - -/** @defgroup TIM_ETR_Polarity TIM ETR Polarity - * @{ - */ -#define TIM_ETRPOLARITY_INVERTED TIM_SMCR_ETP /*!< Polarity for ETR source */ -#define TIM_ETRPOLARITY_NONINVERTED 0x00000000U /*!< Polarity for ETR source */ -/** - * @} - */ - -/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler - * @{ - */ -#define TIM_ETRPRESCALER_DIV1 0x00000000U /*!< No prescaler is used */ -#define TIM_ETRPRESCALER_DIV2 TIM_SMCR_ETPS_0 /*!< ETR input source is divided by 2 */ -#define TIM_ETRPRESCALER_DIV4 TIM_SMCR_ETPS_1 /*!< ETR input source is divided by 4 */ -#define TIM_ETRPRESCALER_DIV8 TIM_SMCR_ETPS /*!< ETR input source is divided by 8 */ -/** - * @} - */ - -/** @defgroup TIM_Counter_Mode TIM Counter Mode - * @{ - */ -#define TIM_COUNTERMODE_UP 0x00000000U /*!< Counter used as up-counter */ -#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as down-counter */ -#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0 /*!< Center-aligned mode 1 */ -#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1 /*!< Center-aligned mode 2 */ -#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS /*!< Center-aligned mode 3 */ -/** - * @} - */ - -/** @defgroup TIM_ClockDivision TIM Clock Division - * @{ - */ -#define TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< Clock division: tDTS=tCK_INT */ -#define TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< Clock division: tDTS=2*tCK_INT */ -#define TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< Clock division: tDTS=4*tCK_INT */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_State TIM Output Compare State - * @{ - */ -#define TIM_OUTPUTSTATE_DISABLE 0x00000000U /*!< Capture/Compare 1 output disabled */ -#define TIM_OUTPUTSTATE_ENABLE TIM_CCER_CC1E /*!< Capture/Compare 1 output enabled */ -/** - * @} - */ - -/** @defgroup TIM_AutoReloadPreload TIM Auto-Reload Preload - * @{ - */ -#define TIM_AUTORELOAD_PRELOAD_DISABLE 0x00000000U /*!< TIMx_ARR register is not buffered */ -#define TIM_AUTORELOAD_PRELOAD_ENABLE TIM_CR1_ARPE /*!< TIMx_ARR register is buffered */ - -/** - * @} - */ - -/** @defgroup TIM_Output_Fast_State TIM Output Fast State - * @{ - */ -#define TIM_OCFAST_DISABLE 0x00000000U /*!< Output Compare fast disable */ -#define TIM_OCFAST_ENABLE TIM_CCMR1_OC1FE /*!< Output Compare fast enable */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State - * @{ - */ -#define TIM_OUTPUTNSTATE_DISABLE 0x00000000U /*!< OCxN is disabled */ -#define TIM_OUTPUTNSTATE_ENABLE TIM_CCER_CC1NE /*!< OCxN is enabled */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity - * @{ - */ -#define TIM_OCPOLARITY_HIGH 0x00000000U /*!< Capture/Compare output polarity */ -#define TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< Capture/Compare output polarity */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity - * @{ - */ -#define TIM_OCNPOLARITY_HIGH 0x00000000U /*!< Capture/Compare complementary output polarity */ -#define TIM_OCNPOLARITY_LOW TIM_CCER_CC1NP /*!< Capture/Compare complementary output polarity */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State - * @{ - */ -#define TIM_OCIDLESTATE_SET TIM_CR2_OIS1 /*!< Output Idle state: OCx=1 when MOE=0 */ -#define TIM_OCIDLESTATE_RESET 0x00000000U /*!< Output Idle state: OCx=0 when MOE=0 */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State - * @{ - */ -#define TIM_OCNIDLESTATE_SET TIM_CR2_OIS1N /*!< Complementary output Idle state: OCxN=1 when MOE=0 */ -#define TIM_OCNIDLESTATE_RESET 0x00000000U /*!< Complementary output Idle state: OCxN=0 when MOE=0 */ -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity - * @{ - */ -#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Capture triggered by rising edge on timer input */ -#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Capture triggered by falling edge on timer input */ -#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Capture triggered by both rising and falling edges on timer input*/ -/** - * @} - */ - -/** @defgroup TIM_Encoder_Input_Polarity TIM Encoder Input Polarity - * @{ - */ -#define TIM_ENCODERINPUTPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Encoder input with rising edge polarity */ -#define TIM_ENCODERINPUTPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Encoder input with falling edge polarity */ -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection - * @{ - */ -#define TIM_ICSELECTION_DIRECTTI TIM_CCMR1_CC1S_0 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC1, IC2, IC3 or IC4, respectively */ -#define TIM_ICSELECTION_INDIRECTTI TIM_CCMR1_CC1S_1 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC2, IC1, IC4 or IC3, respectively */ -#define TIM_ICSELECTION_TRC TIM_CCMR1_CC1S /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */ -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler - * @{ - */ -#define TIM_ICPSC_DIV1 0x00000000U /*!< Capture performed each time an edge is detected on the capture input */ -#define TIM_ICPSC_DIV2 TIM_CCMR1_IC1PSC_0 /*!< Capture performed once every 2 events */ -#define TIM_ICPSC_DIV4 TIM_CCMR1_IC1PSC_1 /*!< Capture performed once every 4 events */ -#define TIM_ICPSC_DIV8 TIM_CCMR1_IC1PSC /*!< Capture performed once every 8 events */ -/** - * @} - */ - -/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode - * @{ - */ -#define TIM_OPMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */ -#define TIM_OPMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */ -/** - * @} - */ - -/** @defgroup TIM_Encoder_Mode TIM Encoder Mode - * @{ - */ -#define TIM_ENCODERMODE_TI1 TIM_SMCR_SMS_0 /*!< Quadrature encoder mode 1, x2 mode, counts up/down on TI1FP1 edge depending on TI2FP2 level */ -#define TIM_ENCODERMODE_TI2 TIM_SMCR_SMS_1 /*!< Quadrature encoder mode 2, x2 mode, counts up/down on TI2FP2 edge depending on TI1FP1 level. */ -#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Quadrature encoder mode 3, x4 mode, counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input. */ -/** - * @} - */ - -/** @defgroup TIM_Interrupt_definition TIM interrupt Definition - * @{ - */ -#define TIM_IT_UPDATE TIM_DIER_UIE /*!< Update interrupt */ -#define TIM_IT_CC1 TIM_DIER_CC1IE /*!< Capture/Compare 1 interrupt */ -#define TIM_IT_CC2 TIM_DIER_CC2IE /*!< Capture/Compare 2 interrupt */ -#define TIM_IT_CC3 TIM_DIER_CC3IE /*!< Capture/Compare 3 interrupt */ -#define TIM_IT_CC4 TIM_DIER_CC4IE /*!< Capture/Compare 4 interrupt */ -#define TIM_IT_COM TIM_DIER_COMIE /*!< Commutation interrupt */ -#define TIM_IT_TRIGGER TIM_DIER_TIE /*!< Trigger interrupt */ -#define TIM_IT_BREAK TIM_DIER_BIE /*!< Break interrupt */ -/** - * @} - */ - -/** @defgroup TIM_Commutation_Source TIM Commutation Source - * @{ - */ -#define TIM_COMMUTATION_TRGI TIM_CR2_CCUS /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit or when an rising edge occurs on trigger input */ -#define TIM_COMMUTATION_SOFTWARE 0x00000000U /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit */ -/** - * @} - */ - -/** @defgroup TIM_DMA_sources TIM DMA Sources - * @{ - */ -#define TIM_DMA_UPDATE TIM_DIER_UDE /*!< DMA request is triggered by the update event */ -#define TIM_DMA_CC1 TIM_DIER_CC1DE /*!< DMA request is triggered by the capture/compare macth 1 event */ -#define TIM_DMA_CC2 TIM_DIER_CC2DE /*!< DMA request is triggered by the capture/compare macth 2 event event */ -#define TIM_DMA_CC3 TIM_DIER_CC3DE /*!< DMA request is triggered by the capture/compare macth 3 event event */ -#define TIM_DMA_CC4 TIM_DIER_CC4DE /*!< DMA request is triggered by the capture/compare macth 4 event event */ -#define TIM_DMA_COM TIM_DIER_COMDE /*!< DMA request is triggered by the commutation event */ -#define TIM_DMA_TRIGGER TIM_DIER_TDE /*!< DMA request is triggered by the trigger event */ -/** - * @} - */ - -/** @defgroup TIM_CC_DMA_Request CCx DMA request selection - * @{ - */ -#define TIM_CCDMAREQUEST_CC 0x00000000U /*!< CCx DMA request sent when capture or compare match event occurs */ -#define TIM_CCDMAREQUEST_UPDATE TIM_CR2_CCDS /*!< CCx DMA requests sent when update event occurs */ -/** - * @} - */ - -/** @defgroup TIM_Flag_definition TIM Flag Definition - * @{ - */ -#define TIM_FLAG_UPDATE TIM_SR_UIF /*!< Update interrupt flag */ -#define TIM_FLAG_CC1 TIM_SR_CC1IF /*!< Capture/Compare 1 interrupt flag */ -#define TIM_FLAG_CC2 TIM_SR_CC2IF /*!< Capture/Compare 2 interrupt flag */ -#define TIM_FLAG_CC3 TIM_SR_CC3IF /*!< Capture/Compare 3 interrupt flag */ -#define TIM_FLAG_CC4 TIM_SR_CC4IF /*!< Capture/Compare 4 interrupt flag */ -#define TIM_FLAG_COM TIM_SR_COMIF /*!< Commutation interrupt flag */ -#define TIM_FLAG_TRIGGER TIM_SR_TIF /*!< Trigger interrupt flag */ -#define TIM_FLAG_BREAK TIM_SR_BIF /*!< Break interrupt flag */ -#define TIM_FLAG_CC1OF TIM_SR_CC1OF /*!< Capture 1 overcapture flag */ -#define TIM_FLAG_CC2OF TIM_SR_CC2OF /*!< Capture 2 overcapture flag */ -#define TIM_FLAG_CC3OF TIM_SR_CC3OF /*!< Capture 3 overcapture flag */ -#define TIM_FLAG_CC4OF TIM_SR_CC4OF /*!< Capture 4 overcapture flag */ -/** - * @} - */ - -/** @defgroup TIM_Channel TIM Channel - * @{ - */ -#define TIM_CHANNEL_1 0x00000000U /*!< Capture/compare channel 1 identifier */ -#define TIM_CHANNEL_2 0x00000004U /*!< Capture/compare channel 2 identifier */ -#define TIM_CHANNEL_3 0x00000008U /*!< Capture/compare channel 3 identifier */ -#define TIM_CHANNEL_4 0x0000000CU /*!< Capture/compare channel 4 identifier */ -#define TIM_CHANNEL_ALL 0x0000003CU /*!< Global Capture/compare channel identifier */ -/** - * @} - */ - -/** @defgroup TIM_Clock_Source TIM Clock Source - * @{ - */ -#define TIM_CLOCKSOURCE_INTERNAL TIM_SMCR_ETPS_0 /*!< Internal clock source */ -#define TIM_CLOCKSOURCE_ETRMODE1 TIM_TS_ETRF /*!< External clock source mode 1 (ETRF) */ -#define TIM_CLOCKSOURCE_ETRMODE2 TIM_SMCR_ETPS_1 /*!< External clock source mode 2 */ -#define TIM_CLOCKSOURCE_TI1ED TIM_TS_TI1F_ED /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */ -#define TIM_CLOCKSOURCE_TI1 TIM_TS_TI1FP1 /*!< External clock source mode 1 (TTI1FP1) */ -#define TIM_CLOCKSOURCE_TI2 TIM_TS_TI2FP2 /*!< External clock source mode 1 (TTI2FP2) */ -#define TIM_CLOCKSOURCE_ITR0 TIM_TS_ITR0 /*!< External clock source mode 1 (ITR0) */ -#define TIM_CLOCKSOURCE_ITR1 TIM_TS_ITR1 /*!< External clock source mode 1 (ITR1) */ -#define TIM_CLOCKSOURCE_ITR2 TIM_TS_ITR2 /*!< External clock source mode 1 (ITR2) */ -#define TIM_CLOCKSOURCE_ITR3 TIM_TS_ITR3 /*!< External clock source mode 1 (ITR3) */ -/** - * @} - */ - -/** @defgroup TIM_Clock_Polarity TIM Clock Polarity - * @{ - */ -#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */ -#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */ -#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */ -#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */ -#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */ -/** - * @} - */ - -/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler - * @{ - */ -#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ -#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */ -#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */ -#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */ -/** - * @} - */ - -/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity - * @{ - */ -#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */ -#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */ -/** - * @} - */ - -/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler - * @{ - */ -#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ -#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */ -#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */ -#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */ -/** - * @} - */ - -/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state - * @{ - */ -#define TIM_OSSR_ENABLE TIM_BDTR_OSSR /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ -#define TIM_OSSR_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ -/** - * @} - */ - -/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state - * @{ - */ -#define TIM_OSSI_ENABLE TIM_BDTR_OSSI /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ -#define TIM_OSSI_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ -/** - * @} - */ -/** @defgroup TIM_Lock_level TIM Lock level - * @{ - */ -#define TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF */ -#define TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */ -#define TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */ -#define TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */ -/** - * @} - */ - -/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable - * @{ - */ -#define TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break input BRK is enabled */ -#define TIM_BREAK_DISABLE 0x00000000U /*!< Break input BRK is disabled */ -/** - * @} - */ - -/** @defgroup TIM_Break_Polarity TIM Break Input Polarity - * @{ - */ -#define TIM_BREAKPOLARITY_LOW 0x00000000U /*!< Break input BRK is active low */ -#define TIM_BREAKPOLARITY_HIGH TIM_BDTR_BKP /*!< Break input BRK is active high */ -/** - * @} - */ - -/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable - * @{ - */ -#define TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ -#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event (if none of the break inputs BRK and BRK2 is active) */ -/** - * @} - */ - -/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection - * @{ - */ -#define TIM_TRGO_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO) */ -#define TIM_TRGO_ENABLE TIM_CR2_MMS_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO) */ -#define TIM_TRGO_UPDATE TIM_CR2_MMS_1 /*!< Update event is used as trigger output (TRGO) */ -#define TIM_TRGO_OC1 (TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO) */ -#define TIM_TRGO_OC1REF TIM_CR2_MMS_2 /*!< OC1REF signal is used as trigger output (TRGO) */ -#define TIM_TRGO_OC2REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_0) /*!< OC2REF signal is used as trigger output(TRGO) */ -#define TIM_TRGO_OC3REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1) /*!< OC3REF signal is used as trigger output(TRGO) */ -#define TIM_TRGO_OC4REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< OC4REF signal is used as trigger output(TRGO) */ -/** - * @} - */ - -/** @defgroup TIM_Master_Slave_Mode TIM Master/Slave Mode - * @{ - */ -#define TIM_MASTERSLAVEMODE_ENABLE TIM_SMCR_MSM /*!< No action */ -#define TIM_MASTERSLAVEMODE_DISABLE 0x00000000U /*!< Master/slave mode is selected */ -/** - * @} - */ - -/** @defgroup TIM_Slave_Mode TIM Slave mode - * @{ - */ -#define TIM_SLAVEMODE_DISABLE 0x00000000U /*!< Slave mode disabled */ -#define TIM_SLAVEMODE_RESET TIM_SMCR_SMS_2 /*!< Reset Mode */ -#define TIM_SLAVEMODE_GATED (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Gated Mode */ -#define TIM_SLAVEMODE_TRIGGER (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Trigger Mode */ -#define TIM_SLAVEMODE_EXTERNAL1 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< External Clock Mode 1 */ -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM Modes - * @{ - */ -#define TIM_OCMODE_TIMING 0x00000000U /*!< Frozen */ -#define TIM_OCMODE_ACTIVE TIM_CCMR1_OC1M_0 /*!< Set channel to active level on match */ -#define TIM_OCMODE_INACTIVE TIM_CCMR1_OC1M_1 /*!< Set channel to inactive level on match */ -#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< Toggle */ -#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1) /*!< PWM mode 1 */ -#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< PWM mode 2 */ -#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0) /*!< Force active level */ -#define TIM_OCMODE_FORCED_INACTIVE TIM_CCMR1_OC1M_2 /*!< Force inactive level */ -/** - * @} - */ - -/** @defgroup TIM_Trigger_Selection TIM Trigger Selection - * @{ - */ -#define TIM_TS_ITR0 0x00000000U /*!< Internal Trigger 0 (ITR0) */ -#define TIM_TS_ITR1 TIM_SMCR_TS_0 /*!< Internal Trigger 1 (ITR1) */ -#define TIM_TS_ITR2 TIM_SMCR_TS_1 /*!< Internal Trigger 2 (ITR2) */ -#define TIM_TS_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) /*!< Internal Trigger 3 (ITR3) */ -#define TIM_TS_TI1F_ED TIM_SMCR_TS_2 /*!< TI1 Edge Detector (TI1F_ED) */ -#define TIM_TS_TI1FP1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 1 (TI1FP1) */ -#define TIM_TS_TI2FP2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 2 (TI2FP2) */ -#define TIM_TS_ETRF (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered External Trigger input (ETRF) */ -#define TIM_TS_NONE 0x0000FFFFU /*!< No trigger selected */ -/** - * @} - */ - -/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity - * @{ - */ -#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */ -#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */ -#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ -#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ -#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */ -/** - * @} - */ - -/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler - * @{ - */ -#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ -#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */ -#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */ -#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */ -/** - * @} - */ - -/** @defgroup TIM_TI1_Selection TIM TI1 Input Selection - * @{ - */ -#define TIM_TI1SELECTION_CH1 0x00000000U /*!< The TIMx_CH1 pin is connected to TI1 input */ -#define TIM_TI1SELECTION_XORCOMBINATION TIM_CR2_TI1S /*!< The TIMx_CH1, CH2 and CH3 pins are connected to the TI1 input (XOR combination) */ -/** - * @} - */ - -/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length - * @{ - */ -#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ -/** - * @} - */ - -/** @defgroup DMA_Handle_index TIM DMA Handle Index - * @{ - */ -#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0000) /*!< Index of the DMA handle used for Update DMA requests */ -#define TIM_DMA_ID_CC1 ((uint16_t) 0x0001) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */ -#define TIM_DMA_ID_CC2 ((uint16_t) 0x0002) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */ -#define TIM_DMA_ID_CC3 ((uint16_t) 0x0003) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */ -#define TIM_DMA_ID_CC4 ((uint16_t) 0x0004) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */ -#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x0005) /*!< Index of the DMA handle used for Commutation DMA requests */ -#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x0006) /*!< Index of the DMA handle used for Trigger DMA requests */ -/** - * @} - */ - -/** @defgroup Channel_CC_State TIM Capture/Compare Channel State - * @{ - */ -#define TIM_CCx_ENABLE 0x00000001U /*!< Input or output channel is enabled */ -#define TIM_CCx_DISABLE 0x00000000U /*!< Input or output channel is disabled */ -#define TIM_CCxN_ENABLE 0x00000004U /*!< Complementary output channel is enabled */ -#define TIM_CCxN_DISABLE 0x00000000U /*!< Complementary output channel is enabled */ -/** - * @} - */ - -/** - * @} - */ -/* End of exported constants -------------------------------------------------*/ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup TIM_Exported_Macros TIM Exported Macros - * @{ - */ - -/** @brief Reset TIM handle state. - * @param __HANDLE__ TIM handle. - * @retval None - */ -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ - (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ - (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ - (__HANDLE__)->Base_MspInitCallback = NULL; \ - (__HANDLE__)->Base_MspDeInitCallback = NULL; \ - (__HANDLE__)->IC_MspInitCallback = NULL; \ - (__HANDLE__)->IC_MspDeInitCallback = NULL; \ - (__HANDLE__)->OC_MspInitCallback = NULL; \ - (__HANDLE__)->OC_MspDeInitCallback = NULL; \ - (__HANDLE__)->PWM_MspInitCallback = NULL; \ - (__HANDLE__)->PWM_MspDeInitCallback = NULL; \ - (__HANDLE__)->OnePulse_MspInitCallback = NULL; \ - (__HANDLE__)->OnePulse_MspDeInitCallback = NULL; \ - (__HANDLE__)->Encoder_MspInitCallback = NULL; \ - (__HANDLE__)->Encoder_MspDeInitCallback = NULL; \ - (__HANDLE__)->HallSensor_MspInitCallback = NULL; \ - (__HANDLE__)->HallSensor_MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ - (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ - (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ - (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ - } while(0) -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - -/** - * @brief Enable the TIM peripheral. - * @param __HANDLE__ TIM handle - * @retval None - */ -#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN)) - -/** - * @brief Enable the TIM main Output. - * @param __HANDLE__ TIM handle - * @retval None - */ -#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE)) - -/** - * @brief Disable the TIM peripheral. - * @param __HANDLE__ TIM handle - * @retval None - */ -#define __HAL_TIM_DISABLE(__HANDLE__) \ - do { \ - if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ - { \ - if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ - { \ - (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \ - } \ - } \ - } while(0) - -/** - * @brief Disable the TIM main Output. - * @param __HANDLE__ TIM handle - * @retval None - * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been - * disabled - */ -#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \ - do { \ - if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ - { \ - if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ - { \ - (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \ - } \ - } \ - } while(0) - -/** - * @brief Disable the TIM main Output. - * @param __HANDLE__ TIM handle - * @retval None - * @note The Main Output Enable of a timer instance is disabled unconditionally - */ -#define __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY(__HANDLE__) (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE) - -/** @brief Enable the specified TIM interrupt. - * @param __HANDLE__ specifies the TIM Handle. - * @param __INTERRUPT__ specifies the TIM interrupt source to enable. - * This parameter can be one of the following values: - * @arg TIM_IT_UPDATE: Update interrupt - * @arg TIM_IT_CC1: Capture/Compare 1 interrupt - * @arg TIM_IT_CC2: Capture/Compare 2 interrupt - * @arg TIM_IT_CC3: Capture/Compare 3 interrupt - * @arg TIM_IT_CC4: Capture/Compare 4 interrupt - * @arg TIM_IT_COM: Commutation interrupt - * @arg TIM_IT_TRIGGER: Trigger interrupt - * @arg TIM_IT_BREAK: Break interrupt - * @retval None - */ -#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__)) - -/** @brief Disable the specified TIM interrupt. - * @param __HANDLE__ specifies the TIM Handle. - * @param __INTERRUPT__ specifies the TIM interrupt source to disable. - * This parameter can be one of the following values: - * @arg TIM_IT_UPDATE: Update interrupt - * @arg TIM_IT_CC1: Capture/Compare 1 interrupt - * @arg TIM_IT_CC2: Capture/Compare 2 interrupt - * @arg TIM_IT_CC3: Capture/Compare 3 interrupt - * @arg TIM_IT_CC4: Capture/Compare 4 interrupt - * @arg TIM_IT_COM: Commutation interrupt - * @arg TIM_IT_TRIGGER: Trigger interrupt - * @arg TIM_IT_BREAK: Break interrupt - * @retval None - */ -#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__)) - -/** @brief Enable the specified DMA request. - * @param __HANDLE__ specifies the TIM Handle. - * @param __DMA__ specifies the TIM DMA request to enable. - * This parameter can be one of the following values: - * @arg TIM_DMA_UPDATE: Update DMA request - * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request - * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request - * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request - * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request - * @arg TIM_DMA_COM: Commutation DMA request - * @arg TIM_DMA_TRIGGER: Trigger DMA request - * @retval None - */ -#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__)) - -/** @brief Disable the specified DMA request. - * @param __HANDLE__ specifies the TIM Handle. - * @param __DMA__ specifies the TIM DMA request to disable. - * This parameter can be one of the following values: - * @arg TIM_DMA_UPDATE: Update DMA request - * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request - * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request - * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request - * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request - * @arg TIM_DMA_COM: Commutation DMA request - * @arg TIM_DMA_TRIGGER: Trigger DMA request - * @retval None - */ -#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__)) - -/** @brief Check whether the specified TIM interrupt flag is set or not. - * @param __HANDLE__ specifies the TIM Handle. - * @param __FLAG__ specifies the TIM interrupt flag to check. - * This parameter can be one of the following values: - * @arg TIM_FLAG_UPDATE: Update interrupt flag - * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag - * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag - * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag - * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag - * @arg TIM_FLAG_COM: Commutation interrupt flag - * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag - * @arg TIM_FLAG_BREAK: Break interrupt flag - * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag - * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag - * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag - * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__)) - -/** @brief Clear the specified TIM interrupt flag. - * @param __HANDLE__ specifies the TIM Handle. - * @param __FLAG__ specifies the TIM interrupt flag to clear. - * This parameter can be one of the following values: - * @arg TIM_FLAG_UPDATE: Update interrupt flag - * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag - * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag - * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag - * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag - * @arg TIM_FLAG_COM: Commutation interrupt flag - * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag - * @arg TIM_FLAG_BREAK: Break interrupt flag - * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag - * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag - * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag - * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) - -/** - * @brief Check whether the specified TIM interrupt source is enabled or not. - * @param __HANDLE__ TIM handle - * @param __INTERRUPT__ specifies the TIM interrupt source to check. - * This parameter can be one of the following values: - * @arg TIM_IT_UPDATE: Update interrupt - * @arg TIM_IT_CC1: Capture/Compare 1 interrupt - * @arg TIM_IT_CC2: Capture/Compare 2 interrupt - * @arg TIM_IT_CC3: Capture/Compare 3 interrupt - * @arg TIM_IT_CC4: Capture/Compare 4 interrupt - * @arg TIM_IT_COM: Commutation interrupt - * @arg TIM_IT_TRIGGER: Trigger interrupt - * @arg TIM_IT_BREAK: Break interrupt - * @retval The state of TIM_IT (SET or RESET). - */ -#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) \ - == (__INTERRUPT__)) ? SET : RESET) - -/** @brief Clear the TIM interrupt pending bits. - * @param __HANDLE__ TIM handle - * @param __INTERRUPT__ specifies the interrupt pending bit to clear. - * This parameter can be one of the following values: - * @arg TIM_IT_UPDATE: Update interrupt - * @arg TIM_IT_CC1: Capture/Compare 1 interrupt - * @arg TIM_IT_CC2: Capture/Compare 2 interrupt - * @arg TIM_IT_CC3: Capture/Compare 3 interrupt - * @arg TIM_IT_CC4: Capture/Compare 4 interrupt - * @arg TIM_IT_COM: Commutation interrupt - * @arg TIM_IT_TRIGGER: Trigger interrupt - * @arg TIM_IT_BREAK: Break interrupt - * @retval None - */ -#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__)) - -/** - * @brief Indicates whether or not the TIM Counter is used as downcounter. - * @param __HANDLE__ TIM handle. - * @retval False (Counter used as upcounter) or True (Counter used as downcounter) - * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode - * or Encoder mode. - */ -#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR)) - -/** - * @brief Set the TIM Prescaler on runtime. - * @param __HANDLE__ TIM handle. - * @param __PRESC__ specifies the Prescaler new value. - * @retval None - */ -#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__)) - -/** - * @brief Set the TIM Counter Register value on runtime. - * @param __HANDLE__ TIM handle. - * @param __COUNTER__ specifies the Counter register new value. - * @retval None - */ -#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__)) - -/** - * @brief Get the TIM Counter Register value on runtime. - * @param __HANDLE__ TIM handle. - * @retval 16-bit or 32-bit value of the timer counter register (TIMx_CNT) - */ -#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT) - -/** - * @brief Set the TIM Autoreload Register value on runtime without calling another time any Init function. - * @param __HANDLE__ TIM handle. - * @param __AUTORELOAD__ specifies the Counter register new value. - * @retval None - */ -#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \ - do{ \ - (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \ - (__HANDLE__)->Init.Period = (__AUTORELOAD__); \ - } while(0) - -/** - * @brief Get the TIM Autoreload Register value on runtime. - * @param __HANDLE__ TIM handle. - * @retval 16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR) - */ -#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR) - -/** - * @brief Set the TIM Clock Division value on runtime without calling another time any Init function. - * @param __HANDLE__ TIM handle. - * @param __CKD__ specifies the clock division value. - * This parameter can be one of the following value: - * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT - * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT - * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT - * @retval None - */ -#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \ - do{ \ - (__HANDLE__)->Instance->CR1 &= (~TIM_CR1_CKD); \ - (__HANDLE__)->Instance->CR1 |= (__CKD__); \ - (__HANDLE__)->Init.ClockDivision = (__CKD__); \ - } while(0) - -/** - * @brief Get the TIM Clock Division value on runtime. - * @param __HANDLE__ TIM handle. - * @retval The clock division can be one of the following values: - * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT - * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT - * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT - */ -#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD) - -/** - * @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() - * function. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param __ICPSC__ specifies the Input Capture4 prescaler new value. - * This parameter can be one of the following values: - * @arg TIM_ICPSC_DIV1: no prescaler - * @arg TIM_ICPSC_DIV2: capture is done once every 2 events - * @arg TIM_ICPSC_DIV4: capture is done once every 4 events - * @arg TIM_ICPSC_DIV8: capture is done once every 8 events - * @retval None - */ -#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \ - do{ \ - TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \ - TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \ - } while(0) - -/** - * @brief Get the TIM Input Capture prescaler on runtime. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: get input capture 1 prescaler value - * @arg TIM_CHANNEL_2: get input capture 2 prescaler value - * @arg TIM_CHANNEL_3: get input capture 3 prescaler value - * @arg TIM_CHANNEL_4: get input capture 4 prescaler value - * @retval The input capture prescaler can be one of the following values: - * @arg TIM_ICPSC_DIV1: no prescaler - * @arg TIM_ICPSC_DIV2: capture is done once every 2 events - * @arg TIM_ICPSC_DIV4: capture is done once every 4 events - * @arg TIM_ICPSC_DIV8: capture is done once every 8 events - */ -#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\ - (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U) - -/** - * @brief Set the TIM Capture Compare Register value on runtime without calling another time ConfigChannel function. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param __COMPARE__ specifies the Capture Compare register new value. - * @retval None - */ -#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\ - ((__HANDLE__)->Instance->CCR4 = (__COMPARE__))) - -/** - * @brief Get the TIM Capture Compare Register value on runtime. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channel associated with the capture compare register - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: get capture/compare 1 register value - * @arg TIM_CHANNEL_2: get capture/compare 2 register value - * @arg TIM_CHANNEL_3: get capture/compare 3 register value - * @arg TIM_CHANNEL_4: get capture/compare 4 register value - * @retval 16-bit or 32-bit value of the capture/compare register (TIMx_CCRy) - */ -#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\ - ((__HANDLE__)->Instance->CCR4)) - -/** - * @brief Set the TIM Output compare preload. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval None - */ -#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\ - ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE)) - -/** - * @brief Reset the TIM Output compare preload. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval None - */ -#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3PE) :\ - ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4PE)) - -/** - * @brief Enable fast mode for a given channel. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @note When fast mode is enabled an active edge on the trigger input acts - * like a compare match on CCx output. Delay to sample the trigger - * input and to activate CCx output is reduced to 3 clock cycles. - * @note Fast mode acts only if the channel is configured in PWM1 or PWM2 mode. - * @retval None - */ -#define __HAL_TIM_ENABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1FE) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2FE) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3FE) :\ - ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4FE)) - -/** - * @brief Disable fast mode for a given channel. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @note When fast mode is disabled CCx output behaves normally depending - * on counter and CCRx values even when the trigger is ON. The minimum - * delay to activate CCx output when an active edge occurs on the - * trigger input is 5 clock cycles. - * @retval None - */ -#define __HAL_TIM_DISABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE) :\ - ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE)) - -/** - * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register. - * @param __HANDLE__ TIM handle. - * @note When the URS bit of the TIMx_CR1 register is set, only counter - * overflow/underflow generates an update interrupt or DMA request (if - * enabled) - * @retval None - */ -#define __HAL_TIM_URS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|= TIM_CR1_URS) - -/** - * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register. - * @param __HANDLE__ TIM handle. - * @note When the URS bit of the TIMx_CR1 register is reset, any of the - * following events generate an update interrupt or DMA request (if - * enabled): - * _ Counter overflow underflow - * _ Setting the UG bit - * _ Update generation through the slave mode controller - * @retval None - */ -#define __HAL_TIM_URS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1&=~TIM_CR1_URS) - -/** - * @brief Set the TIM Capture x input polarity on runtime. - * @param __HANDLE__ TIM handle. - * @param __CHANNEL__ TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param __POLARITY__ Polarity for TIx source - * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge - * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge - * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge - * @retval None - */ -#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ - do{ \ - TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \ - TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \ - }while(0) - -/** @brief Select the Capture/compare DMA request source. - * @param __HANDLE__ specifies the TIM Handle. - * @param __CCDMA__ specifies Capture/compare DMA request source - * This parameter can be one of the following values: - * @arg TIM_CCDMAREQUEST_CC: CCx DMA request generated on Capture/Compare event - * @arg TIM_CCDMAREQUEST_UPDATE: CCx DMA request generated on Update event - * @retval None - */ -#define __HAL_TIM_SELECT_CCDMAREQUEST(__HANDLE__, __CCDMA__) \ - MODIFY_REG((__HANDLE__)->Instance->CR2, TIM_CR2_CCDS, (__CCDMA__)) - -/** - * @} - */ -/* End of exported macros ----------------------------------------------------*/ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup TIM_Private_Constants TIM Private Constants - * @{ - */ -/* The counter of a timer instance is disabled only if all the CCx and CCxN - channels have been disabled */ -#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E)) -#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) -/** - * @} - */ -/* End of private constants --------------------------------------------------*/ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup TIM_Private_Macros TIM Private Macros - * @{ - */ -#define IS_TIM_CLEARINPUT_SOURCE(__MODE__) (((__MODE__) == TIM_CLEARINPUTSOURCE_NONE) || \ - ((__MODE__) == TIM_CLEARINPUTSOURCE_ETR)) - -#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \ - ((__BASE__) == TIM_DMABASE_CR2) || \ - ((__BASE__) == TIM_DMABASE_SMCR) || \ - ((__BASE__) == TIM_DMABASE_DIER) || \ - ((__BASE__) == TIM_DMABASE_SR) || \ - ((__BASE__) == TIM_DMABASE_EGR) || \ - ((__BASE__) == TIM_DMABASE_CCMR1) || \ - ((__BASE__) == TIM_DMABASE_CCMR2) || \ - ((__BASE__) == TIM_DMABASE_CCER) || \ - ((__BASE__) == TIM_DMABASE_CNT) || \ - ((__BASE__) == TIM_DMABASE_PSC) || \ - ((__BASE__) == TIM_DMABASE_ARR) || \ - ((__BASE__) == TIM_DMABASE_RCR) || \ - ((__BASE__) == TIM_DMABASE_CCR1) || \ - ((__BASE__) == TIM_DMABASE_CCR2) || \ - ((__BASE__) == TIM_DMABASE_CCR3) || \ - ((__BASE__) == TIM_DMABASE_CCR4) || \ - ((__BASE__) == TIM_DMABASE_BDTR)) - -#define IS_TIM_EVENT_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFFFF00U) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) - -#define IS_TIM_COUNTER_MODE(__MODE__) (((__MODE__) == TIM_COUNTERMODE_UP) || \ - ((__MODE__) == TIM_COUNTERMODE_DOWN) || \ - ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED1) || \ - ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2) || \ - ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3)) - -#define IS_TIM_CLOCKDIVISION_DIV(__DIV__) (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \ - ((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \ - ((__DIV__) == TIM_CLOCKDIVISION_DIV4)) - -#define IS_TIM_AUTORELOAD_PRELOAD(PRELOAD) (((PRELOAD) == TIM_AUTORELOAD_PRELOAD_DISABLE) || \ - ((PRELOAD) == TIM_AUTORELOAD_PRELOAD_ENABLE)) - -#define IS_TIM_FAST_STATE(__STATE__) (((__STATE__) == TIM_OCFAST_DISABLE) || \ - ((__STATE__) == TIM_OCFAST_ENABLE)) - -#define IS_TIM_OC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCPOLARITY_HIGH) || \ - ((__POLARITY__) == TIM_OCPOLARITY_LOW)) - -#define IS_TIM_OCN_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCNPOLARITY_HIGH) || \ - ((__POLARITY__) == TIM_OCNPOLARITY_LOW)) - -#define IS_TIM_OCIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCIDLESTATE_SET) || \ - ((__STATE__) == TIM_OCIDLESTATE_RESET)) - -#define IS_TIM_OCNIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCNIDLESTATE_SET) || \ - ((__STATE__) == TIM_OCNIDLESTATE_RESET)) - -#define IS_TIM_ENCODERINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_RISING) || \ - ((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_FALLING)) - -#define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING) || \ - ((__POLARITY__) == TIM_ICPOLARITY_FALLING) || \ - ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE)) - -#define IS_TIM_IC_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_ICSELECTION_DIRECTTI) || \ - ((__SELECTION__) == TIM_ICSELECTION_INDIRECTTI) || \ - ((__SELECTION__) == TIM_ICSELECTION_TRC)) - -#define IS_TIM_IC_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_ICPSC_DIV1) || \ - ((__PRESCALER__) == TIM_ICPSC_DIV2) || \ - ((__PRESCALER__) == TIM_ICPSC_DIV4) || \ - ((__PRESCALER__) == TIM_ICPSC_DIV8)) - -#define IS_TIM_OPM_MODE(__MODE__) (((__MODE__) == TIM_OPMODE_SINGLE) || \ - ((__MODE__) == TIM_OPMODE_REPETITIVE)) - -#define IS_TIM_ENCODER_MODE(__MODE__) (((__MODE__) == TIM_ENCODERMODE_TI1) || \ - ((__MODE__) == TIM_ENCODERMODE_TI2) || \ - ((__MODE__) == TIM_ENCODERMODE_TI12)) - -#define IS_TIM_DMA_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFF80FFU) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) - -#define IS_TIM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ - ((__CHANNEL__) == TIM_CHANNEL_2) || \ - ((__CHANNEL__) == TIM_CHANNEL_3) || \ - ((__CHANNEL__) == TIM_CHANNEL_4) || \ - ((__CHANNEL__) == TIM_CHANNEL_ALL)) - -#define IS_TIM_OPM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ - ((__CHANNEL__) == TIM_CHANNEL_2)) - -#define IS_TIM_COMPLEMENTARY_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ - ((__CHANNEL__) == TIM_CHANNEL_2) || \ - ((__CHANNEL__) == TIM_CHANNEL_3)) - -#define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \ - ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3)) - -#define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED) || \ - ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \ - ((__POLARITY__) == TIM_CLOCKPOLARITY_RISING) || \ - ((__POLARITY__) == TIM_CLOCKPOLARITY_FALLING) || \ - ((__POLARITY__) == TIM_CLOCKPOLARITY_BOTHEDGE)) - -#define IS_TIM_CLOCKPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV1) || \ - ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV2) || \ - ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV4) || \ - ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV8)) - -#define IS_TIM_CLOCKFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) - -#define IS_TIM_CLEARINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLEARINPUTPOLARITY_INVERTED) || \ - ((__POLARITY__) == TIM_CLEARINPUTPOLARITY_NONINVERTED)) - -#define IS_TIM_CLEARINPUT_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV1) || \ - ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV2) || \ - ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV4) || \ - ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV8)) - -#define IS_TIM_CLEARINPUT_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) - -#define IS_TIM_OSSR_STATE(__STATE__) (((__STATE__) == TIM_OSSR_ENABLE) || \ - ((__STATE__) == TIM_OSSR_DISABLE)) - -#define IS_TIM_OSSI_STATE(__STATE__) (((__STATE__) == TIM_OSSI_ENABLE) || \ - ((__STATE__) == TIM_OSSI_DISABLE)) - -#define IS_TIM_LOCK_LEVEL(__LEVEL__) (((__LEVEL__) == TIM_LOCKLEVEL_OFF) || \ - ((__LEVEL__) == TIM_LOCKLEVEL_1) || \ - ((__LEVEL__) == TIM_LOCKLEVEL_2) || \ - ((__LEVEL__) == TIM_LOCKLEVEL_3)) - -#define IS_TIM_BREAK_FILTER(__BRKFILTER__) ((__BRKFILTER__) <= 0xFUL) - - -#define IS_TIM_BREAK_STATE(__STATE__) (((__STATE__) == TIM_BREAK_ENABLE) || \ - ((__STATE__) == TIM_BREAK_DISABLE)) - -#define IS_TIM_BREAK_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKPOLARITY_LOW) || \ - ((__POLARITY__) == TIM_BREAKPOLARITY_HIGH)) - -#define IS_TIM_AUTOMATIC_OUTPUT_STATE(__STATE__) (((__STATE__) == TIM_AUTOMATICOUTPUT_ENABLE) || \ - ((__STATE__) == TIM_AUTOMATICOUTPUT_DISABLE)) - -#define IS_TIM_TRGO_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO_RESET) || \ - ((__SOURCE__) == TIM_TRGO_ENABLE) || \ - ((__SOURCE__) == TIM_TRGO_UPDATE) || \ - ((__SOURCE__) == TIM_TRGO_OC1) || \ - ((__SOURCE__) == TIM_TRGO_OC1REF) || \ - ((__SOURCE__) == TIM_TRGO_OC2REF) || \ - ((__SOURCE__) == TIM_TRGO_OC3REF) || \ - ((__SOURCE__) == TIM_TRGO_OC4REF)) - -#define IS_TIM_MSM_STATE(__STATE__) (((__STATE__) == TIM_MASTERSLAVEMODE_ENABLE) || \ - ((__STATE__) == TIM_MASTERSLAVEMODE_DISABLE)) - -#define IS_TIM_SLAVE_MODE(__MODE__) (((__MODE__) == TIM_SLAVEMODE_DISABLE) || \ - ((__MODE__) == TIM_SLAVEMODE_RESET) || \ - ((__MODE__) == TIM_SLAVEMODE_GATED) || \ - ((__MODE__) == TIM_SLAVEMODE_TRIGGER) || \ - ((__MODE__) == TIM_SLAVEMODE_EXTERNAL1)) - -#define IS_TIM_PWM_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_PWM1) || \ - ((__MODE__) == TIM_OCMODE_PWM2)) - -#define IS_TIM_OC_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_TIMING) || \ - ((__MODE__) == TIM_OCMODE_ACTIVE) || \ - ((__MODE__) == TIM_OCMODE_INACTIVE) || \ - ((__MODE__) == TIM_OCMODE_TOGGLE) || \ - ((__MODE__) == TIM_OCMODE_FORCED_ACTIVE) || \ - ((__MODE__) == TIM_OCMODE_FORCED_INACTIVE)) - -#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ - ((__SELECTION__) == TIM_TS_ITR1) || \ - ((__SELECTION__) == TIM_TS_ITR2) || \ - ((__SELECTION__) == TIM_TS_ITR3) || \ - ((__SELECTION__) == TIM_TS_TI1F_ED) || \ - ((__SELECTION__) == TIM_TS_TI1FP1) || \ - ((__SELECTION__) == TIM_TS_TI2FP2) || \ - ((__SELECTION__) == TIM_TS_ETRF)) - -#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ - ((__SELECTION__) == TIM_TS_ITR1) || \ - ((__SELECTION__) == TIM_TS_ITR2) || \ - ((__SELECTION__) == TIM_TS_ITR3) || \ - ((__SELECTION__) == TIM_TS_NONE)) - -#define IS_TIM_TRIGGERPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_TRIGGERPOLARITY_INVERTED ) || \ - ((__POLARITY__) == TIM_TRIGGERPOLARITY_NONINVERTED) || \ - ((__POLARITY__) == TIM_TRIGGERPOLARITY_RISING ) || \ - ((__POLARITY__) == TIM_TRIGGERPOLARITY_FALLING ) || \ - ((__POLARITY__) == TIM_TRIGGERPOLARITY_BOTHEDGE )) - -#define IS_TIM_TRIGGERPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV1) || \ - ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV2) || \ - ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV4) || \ - ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV8)) - -#define IS_TIM_TRIGGERFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) - -#define IS_TIM_TI1SELECTION(__TI1SELECTION__) (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \ - ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION)) - -#define IS_TIM_DMA_LENGTH(__LENGTH__) (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_13TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_14TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_15TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_16TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \ - ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS)) - -#define IS_TIM_DMA_DATA_LENGTH(LENGTH) (((LENGTH) >= 0x1U) && ((LENGTH) < 0x10000U)) - -#define IS_TIM_IC_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) - -#define IS_TIM_DEADTIME(__DEADTIME__) ((__DEADTIME__) <= 0xFFU) - -#define IS_TIM_SLAVEMODE_TRIGGER_ENABLED(__TRIGGER__) ((__TRIGGER__) == TIM_SLAVEMODE_TRIGGER) - -#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\ - ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U))) - -#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\ - ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC)) - -#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\ - ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U)))) - -#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\ - ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP))) - -#define TIM_CHANNEL_STATE_GET(__HANDLE__, __CHANNEL__)\ - (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelState[0] :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelState[1] :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelState[2] :\ - (__HANDLE__)->ChannelState[3]) - -#define TIM_CHANNEL_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__)) :\ - ((__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__))) - -#define TIM_CHANNEL_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ - (__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__); \ - (__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__); \ - (__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__); \ - (__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__); \ - } while(0) - -#define TIM_CHANNEL_N_STATE_GET(__HANDLE__, __CHANNEL__)\ - (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelNState[0] :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelNState[1] :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelNState[2] :\ - (__HANDLE__)->ChannelNState[3]) - -#define TIM_CHANNEL_N_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__)) :\ - ((__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__))) - -#define TIM_CHANNEL_N_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ - (__HANDLE__)->ChannelNState[0] = \ - (__CHANNEL_STATE__); \ - (__HANDLE__)->ChannelNState[1] = \ - (__CHANNEL_STATE__); \ - (__HANDLE__)->ChannelNState[2] = \ - (__CHANNEL_STATE__); \ - (__HANDLE__)->ChannelNState[3] = \ - (__CHANNEL_STATE__); \ - } while(0) - -/** - * @} - */ -/* End of private macros -----------------------------------------------------*/ - -/* Include TIM HAL Extended module */ -#include "stm32f4xx_hal_tim_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup TIM_Exported_Functions TIM Exported Functions - * @{ - */ - -/** @addtogroup TIM_Exported_Functions_Group1 TIM Time Base functions - * @brief Time Base functions - * @{ - */ -/* Time Base functions ********************************************************/ -HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group2 TIM Output Compare functions - * @brief TIM Output Compare functions - * @{ - */ -/* Timer Output Compare functions *********************************************/ -HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group3 TIM PWM functions - * @brief TIM PWM functions - * @{ - */ -/* Timer PWM functions ********************************************************/ -HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group4 TIM Input Capture functions - * @brief TIM Input Capture functions - * @{ - */ -/* Timer Input Capture functions **********************************************/ -HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group5 TIM One Pulse functions - * @brief TIM One Pulse functions - * @{ - */ -/* Timer One Pulse functions **************************************************/ -HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode); -HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group6 TIM Encoder functions - * @brief TIM Encoder functions - * @{ - */ -/* Timer Encoder functions ****************************************************/ -HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig); -HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, - uint32_t *pData2, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group7 TIM IRQ handler management - * @brief IRQ handler management - * @{ - */ -/* Interrupt Handler functions ***********************************************/ -void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim); -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions - * @brief Peripheral Control functions - * @{ - */ -/* Control functions *********************************************************/ -HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, - uint32_t OutputChannel, uint32_t InputChannel); -HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef *sClearInputConfig, - uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig); -HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection); -HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig); -HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig); -HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); -HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, uint32_t *BurstBuffer, - uint32_t BurstLength, uint32_t DataLength); -HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); -HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); -HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, - uint32_t BurstRequestSrc, uint32_t *BurstBuffer, - uint32_t BurstLength, uint32_t DataLength); -HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); -HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource); -uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions - * @brief TIM Callbacks functions - * @{ - */ -/* Callback in non blocking modes (Interrupt and DMA) *************************/ -void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim); - -/* Callbacks Register/UnRegister functions ***********************************/ -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, - pTIM_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions - * @brief Peripheral State functions - * @{ - */ -/* Peripheral State functions ************************************************/ -HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim); - -/* Peripheral Channel state functions ************************************************/ -HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim); -HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim); -/** - * @} - */ - -/** - * @} - */ -/* End of exported functions -------------------------------------------------*/ - -/* Private functions----------------------------------------------------------*/ -/** @defgroup TIM_Private_Functions TIM Private Functions - * @{ - */ -void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure); -void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter); -void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); -void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, - uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter); - -void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma); -void TIM_DMAError(DMA_HandleTypeDef *hdma); -void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma); -void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma); -void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) -void TIM_ResetCallback(TIM_HandleTypeDef *htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - -/** - * @} - */ -/* End of private functions --------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F4xx_HAL_TIM_H */ +/** + ****************************************************************************** + * @file stm32f4xx_hal_tim.h + * @author MCD Application Team + * @brief Header file of TIM HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F4xx_HAL_TIM_H +#define STM32F4xx_HAL_TIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup TIM + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIM_Exported_Types TIM Exported Types + * @{ + */ + +/** + * @brief TIM Time base Configuration Structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_Counter_Mode */ + + uint32_t Period; /*!< Specifies the period value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + + uint32_t ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_ClockDivision */ + + uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + GP timers: this parameter must be a number between Min_Data = 0x00 and + Max_Data = 0xFF. + Advanced timers: this parameter must be a number between Min_Data = 0x0000 and + Max_Data = 0xFFFF. */ + + uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload. + This parameter can be a value of @ref TIM_AutoReloadPreload */ +} TIM_Base_InitTypeDef; + +/** + * @brief TIM Output Compare Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCFastMode; /*!< Specifies the Fast mode state. + This parameter can be a value of @ref TIM_Output_Fast_State + @note This parameter is valid only in PWM1 and PWM2 mode. */ + + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ +} TIM_OC_InitTypeDef; + +/** + * @brief TIM One Pulse Mode Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_OnePulse_InitTypeDef; + +/** + * @brief TIM Input Capture Configuration Structure definition + */ +typedef struct +{ + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_IC_InitTypeDef; + +/** + * @brief TIM Encoder Configuration Structure definition + */ +typedef struct +{ + uint32_t EncoderMode; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Mode */ + + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ + + uint32_t IC1Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ + + uint32_t IC2Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC2Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_Encoder_InitTypeDef; + +/** + * @brief Clock Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClockSource; /*!< TIM clock sources + This parameter can be a value of @ref TIM_Clock_Source */ + uint32_t ClockPolarity; /*!< TIM clock polarity + This parameter can be a value of @ref TIM_Clock_Polarity */ + uint32_t ClockPrescaler; /*!< TIM clock prescaler + This parameter can be a value of @ref TIM_Clock_Prescaler */ + uint32_t ClockFilter; /*!< TIM clock filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_ClockConfigTypeDef; + +/** + * @brief TIM Clear Input Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClearInputState; /*!< TIM clear Input state + This parameter can be ENABLE or DISABLE */ + uint32_t ClearInputSource; /*!< TIM clear Input sources + This parameter can be a value of @ref TIM_ClearInput_Source */ + uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity + This parameter can be a value of @ref TIM_ClearInput_Polarity */ + uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler + This parameter must be 0: When OCRef clear feature is used with ETR source, + ETR prescaler must be off */ + uint32_t ClearInputFilter; /*!< TIM Clear Input filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_ClearInputConfigTypeDef; + +/** + * @brief TIM Master configuration Structure definition + */ +typedef struct +{ + uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection + This parameter can be a value of @ref TIM_Master_Mode_Selection */ + uint32_t MasterSlaveMode; /*!< Master/slave mode selection + This parameter can be a value of @ref TIM_Master_Slave_Mode + @note When the Master/slave mode is enabled, the effect of + an event on the trigger input (TRGI) is delayed to allow a + perfect synchronization between the current timer and its + slaves (through TRGO). It is not mandatory in case of timer + synchronization mode. */ +} TIM_MasterConfigTypeDef; + +/** + * @brief TIM Slave configuration Structure definition + */ +typedef struct +{ + uint32_t SlaveMode; /*!< Slave mode selection + This parameter can be a value of @ref TIM_Slave_Mode */ + uint32_t InputTrigger; /*!< Input Trigger source + This parameter can be a value of @ref TIM_Trigger_Selection */ + uint32_t TriggerPolarity; /*!< Input Trigger polarity + This parameter can be a value of @ref TIM_Trigger_Polarity */ + uint32_t TriggerPrescaler; /*!< Input trigger prescaler + This parameter can be a value of @ref TIM_Trigger_Prescaler */ + uint32_t TriggerFilter; /*!< Input trigger filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + +} TIM_SlaveConfigTypeDef; + +/** + * @brief TIM Break input(s) and Dead time configuration Structure definition + * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable + * filter and polarity. + */ +typedef struct +{ + uint32_t OffStateRunMode; /*!< TIM off state in run mode, This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */ + + uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode, This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */ + + uint32_t LockLevel; /*!< TIM Lock level, This parameter can be a value of @ref TIM_Lock_level */ + + uint32_t DeadTime; /*!< TIM dead Time, This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + + uint32_t BreakState; /*!< TIM Break State, This parameter can be a value of @ref TIM_Break_Input_enable_disable */ + + uint32_t BreakPolarity; /*!< TIM Break input polarity, This parameter can be a value of @ref TIM_Break_Polarity */ + + uint32_t BreakFilter; /*!< Specifies the break input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state, This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ + +} TIM_BreakDeadTimeConfigTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */ + HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */ + HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ + HAL_TIM_STATE_ERROR = 0x04U /*!< Reception process is ongoing */ +} HAL_TIM_StateTypeDef; + +/** + * @brief TIM Channel States definition + */ +typedef enum +{ + HAL_TIM_CHANNEL_STATE_RESET = 0x00U, /*!< TIM Channel initial state */ + HAL_TIM_CHANNEL_STATE_READY = 0x01U, /*!< TIM Channel ready for use */ + HAL_TIM_CHANNEL_STATE_BUSY = 0x02U, /*!< An internal process is ongoing on the TIM channel */ +} HAL_TIM_ChannelStateTypeDef; + +/** + * @brief DMA Burst States definition + */ +typedef enum +{ + HAL_DMA_BURST_STATE_RESET = 0x00U, /*!< DMA Burst initial state */ + HAL_DMA_BURST_STATE_READY = 0x01U, /*!< DMA Burst ready for use */ + HAL_DMA_BURST_STATE_BUSY = 0x02U, /*!< Ongoing DMA Burst */ +} HAL_TIM_DMABurstStateTypeDef; + +/** + * @brief HAL Active channel structures definition + */ +typedef enum +{ + HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */ + HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */ + HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */ + HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */ + HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00U /*!< All active channels cleared */ +} HAL_TIM_ActiveChannel; + +/** + * @brief TIM Time Base Handle Structure definition + */ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +typedef struct __TIM_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +{ + TIM_TypeDef *Instance; /*!< Register base address */ + TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */ + HAL_TIM_ActiveChannel Channel; /*!< Active channel */ + DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array + This array is accessed by a @ref DMA_Handle_index */ + HAL_LockTypeDef Lock; /*!< Locking object */ + __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelState[4]; /*!< TIM channel operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelNState[4]; /*!< TIM complementary channel operation state */ + __IO HAL_TIM_DMABurstStateTypeDef DMABurstState; /*!< DMA burst operation state */ + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + void (* Base_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp Init Callback */ + void (* Base_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp DeInit Callback */ + void (* IC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp Init Callback */ + void (* IC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp DeInit Callback */ + void (* OC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp Init Callback */ + void (* OC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp DeInit Callback */ + void (* PWM_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp Init Callback */ + void (* PWM_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp DeInit Callback */ + void (* OnePulse_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp Init Callback */ + void (* OnePulse_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp DeInit Callback */ + void (* Encoder_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp Init Callback */ + void (* Encoder_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp DeInit Callback */ + void (* HallSensor_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp Init Callback */ + void (* HallSensor_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp DeInit Callback */ + void (* PeriodElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed Callback */ + void (* PeriodElapsedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed half complete Callback */ + void (* TriggerCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger Callback */ + void (* TriggerHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger half complete Callback */ + void (* IC_CaptureCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture Callback */ + void (* IC_CaptureHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture half complete Callback */ + void (* OC_DelayElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Output Compare Delay Elapsed Callback */ + void (* PWM_PulseFinishedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished Callback */ + void (* PWM_PulseFinishedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished half complete Callback */ + void (* ErrorCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Error Callback */ + void (* CommutationCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation Callback */ + void (* CommutationHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation half complete Callback */ + void (* BreakCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break Callback */ +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} TIM_HandleTypeDef; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief HAL TIM Callback ID enumeration definition + */ +typedef enum +{ + HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U /*!< TIM Base MspInit Callback ID */ + , HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U /*!< TIM Base MspDeInit Callback ID */ + , HAL_TIM_IC_MSPINIT_CB_ID = 0x02U /*!< TIM IC MspInit Callback ID */ + , HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U /*!< TIM IC MspDeInit Callback ID */ + , HAL_TIM_OC_MSPINIT_CB_ID = 0x04U /*!< TIM OC MspInit Callback ID */ + , HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U /*!< TIM OC MspDeInit Callback ID */ + , HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U /*!< TIM PWM MspInit Callback ID */ + , HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U /*!< TIM PWM MspDeInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U /*!< TIM One Pulse MspInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U /*!< TIM One Pulse MspDeInit Callback ID */ + , HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU /*!< TIM Encoder MspInit Callback ID */ + , HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU /*!< TIM Encoder MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU /*!< TIM Period Elapsed Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID = 0x0FU /*!< TIM Period Elapsed half complete Callback ID */ + , HAL_TIM_TRIGGER_CB_ID = 0x10U /*!< TIM Trigger Callback ID */ + , HAL_TIM_TRIGGER_HALF_CB_ID = 0x11U /*!< TIM Trigger half complete Callback ID */ + + , HAL_TIM_IC_CAPTURE_CB_ID = 0x12U /*!< TIM Input Capture Callback ID */ + , HAL_TIM_IC_CAPTURE_HALF_CB_ID = 0x13U /*!< TIM Input Capture half complete Callback ID */ + , HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x14U /*!< TIM Output Compare Delay Elapsed Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x15U /*!< TIM PWM Pulse Finished Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U /*!< TIM PWM Pulse Finished half complete Callback ID */ + , HAL_TIM_ERROR_CB_ID = 0x17U /*!< TIM Error Callback ID */ + , HAL_TIM_COMMUTATION_CB_ID = 0x18U /*!< TIM Commutation Callback ID */ + , HAL_TIM_COMMUTATION_HALF_CB_ID = 0x19U /*!< TIM Commutation half complete Callback ID */ + , HAL_TIM_BREAK_CB_ID = 0x1AU /*!< TIM Break Callback ID */ +} HAL_TIM_CallbackIDTypeDef; + +/** + * @brief HAL TIM Callback pointer definition + */ +typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to the TIM callback function */ + +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIM_Exported_Constants TIM Exported Constants + * @{ + */ + +/** @defgroup TIM_ClearInput_Source TIM Clear Input Source + * @{ + */ +#define TIM_CLEARINPUTSOURCE_NONE 0x00000000U /*!< OCREF_CLR is disabled */ +#define TIM_CLEARINPUTSOURCE_ETR 0x00000001U /*!< OCREF_CLR is connected to ETRF input */ +/** + * @} + */ + +/** @defgroup TIM_DMA_Base_address TIM DMA Base Address + * @{ + */ +#define TIM_DMABASE_CR1 0x00000000U +#define TIM_DMABASE_CR2 0x00000001U +#define TIM_DMABASE_SMCR 0x00000002U +#define TIM_DMABASE_DIER 0x00000003U +#define TIM_DMABASE_SR 0x00000004U +#define TIM_DMABASE_EGR 0x00000005U +#define TIM_DMABASE_CCMR1 0x00000006U +#define TIM_DMABASE_CCMR2 0x00000007U +#define TIM_DMABASE_CCER 0x00000008U +#define TIM_DMABASE_CNT 0x00000009U +#define TIM_DMABASE_PSC 0x0000000AU +#define TIM_DMABASE_ARR 0x0000000BU +#define TIM_DMABASE_RCR 0x0000000CU +#define TIM_DMABASE_CCR1 0x0000000DU +#define TIM_DMABASE_CCR2 0x0000000EU +#define TIM_DMABASE_CCR3 0x0000000FU +#define TIM_DMABASE_CCR4 0x00000010U +#define TIM_DMABASE_BDTR 0x00000011U +#define TIM_DMABASE_DCR 0x00000012U +#define TIM_DMABASE_DMAR 0x00000013U +/** + * @} + */ + +/** @defgroup TIM_Event_Source TIM Event Source + * @{ + */ +#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */ +#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1 */ +#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2 */ +#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3 */ +#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4 */ +#define TIM_EVENTSOURCE_COM TIM_EGR_COMG /*!< A commutation event is generated */ +#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG /*!< A trigger event is generated */ +#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG /*!< A break event is generated */ +/** + * @} + */ + +/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel polarity + * @{ + */ +#define TIM_INPUTCHANNELPOLARITY_RISING 0x00000000U /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_FALLING TIM_CCER_CC1P /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Polarity TIM ETR Polarity + * @{ + */ +#define TIM_ETRPOLARITY_INVERTED TIM_SMCR_ETP /*!< Polarity for ETR source */ +#define TIM_ETRPOLARITY_NONINVERTED 0x00000000U /*!< Polarity for ETR source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler + * @{ + */ +#define TIM_ETRPRESCALER_DIV1 0x00000000U /*!< No prescaler is used */ +#define TIM_ETRPRESCALER_DIV2 TIM_SMCR_ETPS_0 /*!< ETR input source is divided by 2 */ +#define TIM_ETRPRESCALER_DIV4 TIM_SMCR_ETPS_1 /*!< ETR input source is divided by 4 */ +#define TIM_ETRPRESCALER_DIV8 TIM_SMCR_ETPS /*!< ETR input source is divided by 8 */ +/** + * @} + */ + +/** @defgroup TIM_Counter_Mode TIM Counter Mode + * @{ + */ +#define TIM_COUNTERMODE_UP 0x00000000U /*!< Counter used as up-counter */ +#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as down-counter */ +#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0 /*!< Center-aligned mode 1 */ +#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1 /*!< Center-aligned mode 2 */ +#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS /*!< Center-aligned mode 3 */ +/** + * @} + */ + +/** @defgroup TIM_ClockDivision TIM Clock Division + * @{ + */ +#define TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< Clock division: tDTS=tCK_INT */ +#define TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< Clock division: tDTS=2*tCK_INT */ +#define TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< Clock division: tDTS=4*tCK_INT */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_State TIM Output Compare State + * @{ + */ +#define TIM_OUTPUTSTATE_DISABLE 0x00000000U /*!< Capture/Compare 1 output disabled */ +#define TIM_OUTPUTSTATE_ENABLE TIM_CCER_CC1E /*!< Capture/Compare 1 output enabled */ +/** + * @} + */ + +/** @defgroup TIM_AutoReloadPreload TIM Auto-Reload Preload + * @{ + */ +#define TIM_AUTORELOAD_PRELOAD_DISABLE 0x00000000U /*!< TIMx_ARR register is not buffered */ +#define TIM_AUTORELOAD_PRELOAD_ENABLE TIM_CR1_ARPE /*!< TIMx_ARR register is buffered */ + +/** + * @} + */ + +/** @defgroup TIM_Output_Fast_State TIM Output Fast State + * @{ + */ +#define TIM_OCFAST_DISABLE 0x00000000U /*!< Output Compare fast disable */ +#define TIM_OCFAST_ENABLE TIM_CCMR1_OC1FE /*!< Output Compare fast enable */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State + * @{ + */ +#define TIM_OUTPUTNSTATE_DISABLE 0x00000000U /*!< OCxN is disabled */ +#define TIM_OUTPUTNSTATE_ENABLE TIM_CCER_CC1NE /*!< OCxN is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity + * @{ + */ +#define TIM_OCPOLARITY_HIGH 0x00000000U /*!< Capture/Compare output polarity */ +#define TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< Capture/Compare output polarity */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity + * @{ + */ +#define TIM_OCNPOLARITY_HIGH 0x00000000U /*!< Capture/Compare complementary output polarity */ +#define TIM_OCNPOLARITY_LOW TIM_CCER_CC1NP /*!< Capture/Compare complementary output polarity */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State + * @{ + */ +#define TIM_OCIDLESTATE_SET TIM_CR2_OIS1 /*!< Output Idle state: OCx=1 when MOE=0 */ +#define TIM_OCIDLESTATE_RESET 0x00000000U /*!< Output Idle state: OCx=0 when MOE=0 */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State + * @{ + */ +#define TIM_OCNIDLESTATE_SET TIM_CR2_OIS1N /*!< Complementary output Idle state: OCxN=1 when MOE=0 */ +#define TIM_OCNIDLESTATE_RESET 0x00000000U /*!< Complementary output Idle state: OCxN=0 when MOE=0 */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity + * @{ + */ +#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Capture triggered by rising edge on timer input */ +#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Capture triggered by falling edge on timer input */ +#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Capture triggered by both rising and falling edges on timer input*/ +/** + * @} + */ + +/** @defgroup TIM_Encoder_Input_Polarity TIM Encoder Input Polarity + * @{ + */ +#define TIM_ENCODERINPUTPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Encoder input with rising edge polarity */ +#define TIM_ENCODERINPUTPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Encoder input with falling edge polarity */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection + * @{ + */ +#define TIM_ICSELECTION_DIRECTTI TIM_CCMR1_CC1S_0 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC1, IC2, IC3 or IC4, respectively */ +#define TIM_ICSELECTION_INDIRECTTI TIM_CCMR1_CC1S_1 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC2, IC1, IC4 or IC3, respectively */ +#define TIM_ICSELECTION_TRC TIM_CCMR1_CC1S /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler + * @{ + */ +#define TIM_ICPSC_DIV1 0x00000000U /*!< Capture performed each time an edge is detected on the capture input */ +#define TIM_ICPSC_DIV2 TIM_CCMR1_IC1PSC_0 /*!< Capture performed once every 2 events */ +#define TIM_ICPSC_DIV4 TIM_CCMR1_IC1PSC_1 /*!< Capture performed once every 4 events */ +#define TIM_ICPSC_DIV8 TIM_CCMR1_IC1PSC /*!< Capture performed once every 8 events */ +/** + * @} + */ + +/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode + * @{ + */ +#define TIM_OPMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */ +#define TIM_OPMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */ +/** + * @} + */ + +/** @defgroup TIM_Encoder_Mode TIM Encoder Mode + * @{ + */ +#define TIM_ENCODERMODE_TI1 TIM_SMCR_SMS_0 /*!< Quadrature encoder mode 1, x2 mode, counts up/down on TI1FP1 edge depending on TI2FP2 level */ +#define TIM_ENCODERMODE_TI2 TIM_SMCR_SMS_1 /*!< Quadrature encoder mode 2, x2 mode, counts up/down on TI2FP2 edge depending on TI1FP1 level. */ +#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Quadrature encoder mode 3, x4 mode, counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input. */ +/** + * @} + */ + +/** @defgroup TIM_Interrupt_definition TIM interrupt Definition + * @{ + */ +#define TIM_IT_UPDATE TIM_DIER_UIE /*!< Update interrupt */ +#define TIM_IT_CC1 TIM_DIER_CC1IE /*!< Capture/Compare 1 interrupt */ +#define TIM_IT_CC2 TIM_DIER_CC2IE /*!< Capture/Compare 2 interrupt */ +#define TIM_IT_CC3 TIM_DIER_CC3IE /*!< Capture/Compare 3 interrupt */ +#define TIM_IT_CC4 TIM_DIER_CC4IE /*!< Capture/Compare 4 interrupt */ +#define TIM_IT_COM TIM_DIER_COMIE /*!< Commutation interrupt */ +#define TIM_IT_TRIGGER TIM_DIER_TIE /*!< Trigger interrupt */ +#define TIM_IT_BREAK TIM_DIER_BIE /*!< Break interrupt */ +/** + * @} + */ + +/** @defgroup TIM_Commutation_Source TIM Commutation Source + * @{ + */ +#define TIM_COMMUTATION_TRGI TIM_CR2_CCUS /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit or when an rising edge occurs on trigger input */ +#define TIM_COMMUTATION_SOFTWARE 0x00000000U /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit */ +/** + * @} + */ + +/** @defgroup TIM_DMA_sources TIM DMA Sources + * @{ + */ +#define TIM_DMA_UPDATE TIM_DIER_UDE /*!< DMA request is triggered by the update event */ +#define TIM_DMA_CC1 TIM_DIER_CC1DE /*!< DMA request is triggered by the capture/compare macth 1 event */ +#define TIM_DMA_CC2 TIM_DIER_CC2DE /*!< DMA request is triggered by the capture/compare macth 2 event event */ +#define TIM_DMA_CC3 TIM_DIER_CC3DE /*!< DMA request is triggered by the capture/compare macth 3 event event */ +#define TIM_DMA_CC4 TIM_DIER_CC4DE /*!< DMA request is triggered by the capture/compare macth 4 event event */ +#define TIM_DMA_COM TIM_DIER_COMDE /*!< DMA request is triggered by the commutation event */ +#define TIM_DMA_TRIGGER TIM_DIER_TDE /*!< DMA request is triggered by the trigger event */ +/** + * @} + */ + +/** @defgroup TIM_CC_DMA_Request CCx DMA request selection + * @{ + */ +#define TIM_CCDMAREQUEST_CC 0x00000000U /*!< CCx DMA request sent when capture or compare match event occurs */ +#define TIM_CCDMAREQUEST_UPDATE TIM_CR2_CCDS /*!< CCx DMA requests sent when update event occurs */ +/** + * @} + */ + +/** @defgroup TIM_Flag_definition TIM Flag Definition + * @{ + */ +#define TIM_FLAG_UPDATE TIM_SR_UIF /*!< Update interrupt flag */ +#define TIM_FLAG_CC1 TIM_SR_CC1IF /*!< Capture/Compare 1 interrupt flag */ +#define TIM_FLAG_CC2 TIM_SR_CC2IF /*!< Capture/Compare 2 interrupt flag */ +#define TIM_FLAG_CC3 TIM_SR_CC3IF /*!< Capture/Compare 3 interrupt flag */ +#define TIM_FLAG_CC4 TIM_SR_CC4IF /*!< Capture/Compare 4 interrupt flag */ +#define TIM_FLAG_COM TIM_SR_COMIF /*!< Commutation interrupt flag */ +#define TIM_FLAG_TRIGGER TIM_SR_TIF /*!< Trigger interrupt flag */ +#define TIM_FLAG_BREAK TIM_SR_BIF /*!< Break interrupt flag */ +#define TIM_FLAG_CC1OF TIM_SR_CC1OF /*!< Capture 1 overcapture flag */ +#define TIM_FLAG_CC2OF TIM_SR_CC2OF /*!< Capture 2 overcapture flag */ +#define TIM_FLAG_CC3OF TIM_SR_CC3OF /*!< Capture 3 overcapture flag */ +#define TIM_FLAG_CC4OF TIM_SR_CC4OF /*!< Capture 4 overcapture flag */ +/** + * @} + */ + +/** @defgroup TIM_Channel TIM Channel + * @{ + */ +#define TIM_CHANNEL_1 0x00000000U /*!< Capture/compare channel 1 identifier */ +#define TIM_CHANNEL_2 0x00000004U /*!< Capture/compare channel 2 identifier */ +#define TIM_CHANNEL_3 0x00000008U /*!< Capture/compare channel 3 identifier */ +#define TIM_CHANNEL_4 0x0000000CU /*!< Capture/compare channel 4 identifier */ +#define TIM_CHANNEL_ALL 0x0000003CU /*!< Global Capture/compare channel identifier */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Source TIM Clock Source + * @{ + */ +#define TIM_CLOCKSOURCE_INTERNAL TIM_SMCR_ETPS_0 /*!< Internal clock source */ +#define TIM_CLOCKSOURCE_ETRMODE1 TIM_TS_ETRF /*!< External clock source mode 1 (ETRF) */ +#define TIM_CLOCKSOURCE_ETRMODE2 TIM_SMCR_ETPS_1 /*!< External clock source mode 2 */ +#define TIM_CLOCKSOURCE_TI1ED TIM_TS_TI1F_ED /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */ +#define TIM_CLOCKSOURCE_TI1 TIM_TS_TI1FP1 /*!< External clock source mode 1 (TTI1FP1) */ +#define TIM_CLOCKSOURCE_TI2 TIM_TS_TI2FP2 /*!< External clock source mode 1 (TTI2FP2) */ +#define TIM_CLOCKSOURCE_ITR0 TIM_TS_ITR0 /*!< External clock source mode 1 (ITR0) */ +#define TIM_CLOCKSOURCE_ITR1 TIM_TS_ITR1 /*!< External clock source mode 1 (ITR1) */ +#define TIM_CLOCKSOURCE_ITR2 TIM_TS_ITR2 /*!< External clock source mode 1 (ITR2) */ +#define TIM_CLOCKSOURCE_ITR3 TIM_TS_ITR3 /*!< External clock source mode 1 (ITR3) */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Polarity TIM Clock Polarity + * @{ + */ +#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler + * @{ + */ +#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */ +#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */ +#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity + * @{ + */ +#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */ +#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler + * @{ + */ +#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state + * @{ + */ +#define TIM_OSSR_ENABLE TIM_BDTR_OSSR /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ +#define TIM_OSSR_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ +/** + * @} + */ + +/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state + * @{ + */ +#define TIM_OSSI_ENABLE TIM_BDTR_OSSI /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ +#define TIM_OSSI_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ +/** + * @} + */ +/** @defgroup TIM_Lock_level TIM Lock level + * @{ + */ +#define TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF */ +#define TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */ +#define TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */ +#define TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */ +/** + * @} + */ + +/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable + * @{ + */ +#define TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break input BRK is enabled */ +#define TIM_BREAK_DISABLE 0x00000000U /*!< Break input BRK is disabled */ +/** + * @} + */ + +/** @defgroup TIM_Break_Polarity TIM Break Input Polarity + * @{ + */ +#define TIM_BREAKPOLARITY_LOW 0x00000000U /*!< Break input BRK is active low */ +#define TIM_BREAKPOLARITY_HIGH TIM_BDTR_BKP /*!< Break input BRK is active high */ +/** + * @} + */ + +/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable + * @{ + */ +#define TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ +#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event (if none of the break inputs BRK and BRK2 is active) */ +/** + * @} + */ + +/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection + * @{ + */ +#define TIM_TRGO_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO) */ +#define TIM_TRGO_ENABLE TIM_CR2_MMS_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO) */ +#define TIM_TRGO_UPDATE TIM_CR2_MMS_1 /*!< Update event is used as trigger output (TRGO) */ +#define TIM_TRGO_OC1 (TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO) */ +#define TIM_TRGO_OC1REF TIM_CR2_MMS_2 /*!< OC1REF signal is used as trigger output (TRGO) */ +#define TIM_TRGO_OC2REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_0) /*!< OC2REF signal is used as trigger output(TRGO) */ +#define TIM_TRGO_OC3REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1) /*!< OC3REF signal is used as trigger output(TRGO) */ +#define TIM_TRGO_OC4REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< OC4REF signal is used as trigger output(TRGO) */ +/** + * @} + */ + +/** @defgroup TIM_Master_Slave_Mode TIM Master/Slave Mode + * @{ + */ +#define TIM_MASTERSLAVEMODE_ENABLE TIM_SMCR_MSM /*!< No action */ +#define TIM_MASTERSLAVEMODE_DISABLE 0x00000000U /*!< Master/slave mode is selected */ +/** + * @} + */ + +/** @defgroup TIM_Slave_Mode TIM Slave mode + * @{ + */ +#define TIM_SLAVEMODE_DISABLE 0x00000000U /*!< Slave mode disabled */ +#define TIM_SLAVEMODE_RESET TIM_SMCR_SMS_2 /*!< Reset Mode */ +#define TIM_SLAVEMODE_GATED (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Gated Mode */ +#define TIM_SLAVEMODE_TRIGGER (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Trigger Mode */ +#define TIM_SLAVEMODE_EXTERNAL1 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< External Clock Mode 1 */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM Modes + * @{ + */ +#define TIM_OCMODE_TIMING 0x00000000U /*!< Frozen */ +#define TIM_OCMODE_ACTIVE TIM_CCMR1_OC1M_0 /*!< Set channel to active level on match */ +#define TIM_OCMODE_INACTIVE TIM_CCMR1_OC1M_1 /*!< Set channel to inactive level on match */ +#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< Toggle */ +#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1) /*!< PWM mode 1 */ +#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< PWM mode 2 */ +#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0) /*!< Force active level */ +#define TIM_OCMODE_FORCED_INACTIVE TIM_CCMR1_OC1M_2 /*!< Force inactive level */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Selection TIM Trigger Selection + * @{ + */ +#define TIM_TS_ITR0 0x00000000U /*!< Internal Trigger 0 (ITR0) */ +#define TIM_TS_ITR1 TIM_SMCR_TS_0 /*!< Internal Trigger 1 (ITR1) */ +#define TIM_TS_ITR2 TIM_SMCR_TS_1 /*!< Internal Trigger 2 (ITR2) */ +#define TIM_TS_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) /*!< Internal Trigger 3 (ITR3) */ +#define TIM_TS_TI1F_ED TIM_SMCR_TS_2 /*!< TI1 Edge Detector (TI1F_ED) */ +#define TIM_TS_TI1FP1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 1 (TI1FP1) */ +#define TIM_TS_TI2FP2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 2 (TI2FP2) */ +#define TIM_TS_ETRF (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered External Trigger input (ETRF) */ +#define TIM_TS_NONE 0x0000FFFFU /*!< No trigger selected */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity + * @{ + */ +#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler + * @{ + */ +#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */ +#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */ +#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_TI1_Selection TIM TI1 Input Selection + * @{ + */ +#define TIM_TI1SELECTION_CH1 0x00000000U /*!< The TIMx_CH1 pin is connected to TI1 input */ +#define TIM_TI1SELECTION_XORCOMBINATION TIM_CR2_TI1S /*!< The TIMx_CH1, CH2 and CH3 pins are connected to the TI1 input (XOR combination) */ +/** + * @} + */ + +/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length + * @{ + */ +#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +/** + * @} + */ + +/** @defgroup DMA_Handle_index TIM DMA Handle Index + * @{ + */ +#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0000) /*!< Index of the DMA handle used for Update DMA requests */ +#define TIM_DMA_ID_CC1 ((uint16_t) 0x0001) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */ +#define TIM_DMA_ID_CC2 ((uint16_t) 0x0002) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */ +#define TIM_DMA_ID_CC3 ((uint16_t) 0x0003) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */ +#define TIM_DMA_ID_CC4 ((uint16_t) 0x0004) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */ +#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x0005) /*!< Index of the DMA handle used for Commutation DMA requests */ +#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x0006) /*!< Index of the DMA handle used for Trigger DMA requests */ +/** + * @} + */ + +/** @defgroup Channel_CC_State TIM Capture/Compare Channel State + * @{ + */ +#define TIM_CCx_ENABLE 0x00000001U /*!< Input or output channel is enabled */ +#define TIM_CCx_DISABLE 0x00000000U /*!< Input or output channel is disabled */ +#define TIM_CCxN_ENABLE 0x00000004U /*!< Complementary output channel is enabled */ +#define TIM_CCxN_DISABLE 0x00000000U /*!< Complementary output channel is enabled */ +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup TIM_Exported_Macros TIM Exported Macros + * @{ + */ + +/** @brief Reset TIM handle state. + * @param __HANDLE__ TIM handle. + * @retval None + */ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + (__HANDLE__)->Base_MspInitCallback = NULL; \ + (__HANDLE__)->Base_MspDeInitCallback = NULL; \ + (__HANDLE__)->IC_MspInitCallback = NULL; \ + (__HANDLE__)->IC_MspDeInitCallback = NULL; \ + (__HANDLE__)->OC_MspInitCallback = NULL; \ + (__HANDLE__)->OC_MspDeInitCallback = NULL; \ + (__HANDLE__)->PWM_MspInitCallback = NULL; \ + (__HANDLE__)->PWM_MspDeInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspDeInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspDeInitCallback = NULL; \ + (__HANDLE__)->HallSensor_MspInitCallback = NULL; \ + (__HANDLE__)->HallSensor_MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + } while(0) +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @brief Enable the TIM peripheral. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN)) + +/** + * @brief Enable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE)) + +/** + * @brief Disable the TIM peripheral. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ + { \ + if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ + { \ + (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \ + } \ + } \ + } while(0) + +/** + * @brief Disable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been + * disabled + */ +#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ + { \ + if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ + { \ + (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \ + } \ + } \ + } while(0) + +/** + * @brief Disable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + * @note The Main Output Enable of a timer instance is disabled unconditionally + */ +#define __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY(__HANDLE__) (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE) + +/** @brief Enable the specified TIM interrupt. + * @param __HANDLE__ specifies the TIM Handle. + * @param __INTERRUPT__ specifies the TIM interrupt source to enable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__)) + +/** @brief Disable the specified TIM interrupt. + * @param __HANDLE__ specifies the TIM Handle. + * @param __INTERRUPT__ specifies the TIM interrupt source to disable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__)) + +/** @brief Enable the specified DMA request. + * @param __HANDLE__ specifies the TIM Handle. + * @param __DMA__ specifies the TIM DMA request to enable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_COM: Commutation DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__)) + +/** @brief Disable the specified DMA request. + * @param __HANDLE__ specifies the TIM Handle. + * @param __DMA__ specifies the TIM DMA request to disable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_COM: Commutation DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__)) + +/** @brief Check whether the specified TIM interrupt flag is set or not. + * @param __HANDLE__ specifies the TIM Handle. + * @param __FLAG__ specifies the TIM interrupt flag to check. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_BREAK: Break interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__)) + +/** @brief Clear the specified TIM interrupt flag. + * @param __HANDLE__ specifies the TIM Handle. + * @param __FLAG__ specifies the TIM interrupt flag to clear. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_BREAK: Break interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) + +/** + * @brief Check whether the specified TIM interrupt source is enabled or not. + * @param __HANDLE__ TIM handle + * @param __INTERRUPT__ specifies the TIM interrupt source to check. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval The state of TIM_IT (SET or RESET). + */ +#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) \ + == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Clear the TIM interrupt pending bits. + * @param __HANDLE__ TIM handle + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__)) + +/** + * @brief Indicates whether or not the TIM Counter is used as downcounter. + * @param __HANDLE__ TIM handle. + * @retval False (Counter used as upcounter) or True (Counter used as downcounter) + * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode + * or Encoder mode. + */ +#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR)) + +/** + * @brief Set the TIM Prescaler on runtime. + * @param __HANDLE__ TIM handle. + * @param __PRESC__ specifies the Prescaler new value. + * @retval None + */ +#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__)) + +/** + * @brief Set the TIM Counter Register value on runtime. + * @param __HANDLE__ TIM handle. + * @param __COUNTER__ specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__)) + +/** + * @brief Get the TIM Counter Register value on runtime. + * @param __HANDLE__ TIM handle. + * @retval 16-bit or 32-bit value of the timer counter register (TIMx_CNT) + */ +#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT) + +/** + * @brief Set the TIM Autoreload Register value on runtime without calling another time any Init function. + * @param __HANDLE__ TIM handle. + * @param __AUTORELOAD__ specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \ + do{ \ + (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \ + (__HANDLE__)->Init.Period = (__AUTORELOAD__); \ + } while(0) + +/** + * @brief Get the TIM Autoreload Register value on runtime. + * @param __HANDLE__ TIM handle. + * @retval 16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR) + */ +#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR) + +/** + * @brief Set the TIM Clock Division value on runtime without calling another time any Init function. + * @param __HANDLE__ TIM handle. + * @param __CKD__ specifies the clock division value. + * This parameter can be one of the following value: + * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT + * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT + * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT + * @retval None + */ +#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \ + do{ \ + (__HANDLE__)->Instance->CR1 &= (~TIM_CR1_CKD); \ + (__HANDLE__)->Instance->CR1 |= (__CKD__); \ + (__HANDLE__)->Init.ClockDivision = (__CKD__); \ + } while(0) + +/** + * @brief Get the TIM Clock Division value on runtime. + * @param __HANDLE__ TIM handle. + * @retval The clock division can be one of the following values: + * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT + * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT + * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT + */ +#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD) + +/** + * @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() + * function. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __ICPSC__ specifies the Input Capture4 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \ + do{ \ + TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \ + } while(0) + +/** + * @brief Get the TIM Input Capture prescaler on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get input capture 1 prescaler value + * @arg TIM_CHANNEL_2: get input capture 2 prescaler value + * @arg TIM_CHANNEL_3: get input capture 3 prescaler value + * @arg TIM_CHANNEL_4: get input capture 4 prescaler value + * @retval The input capture prescaler can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + */ +#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\ + (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U) + +/** + * @brief Set the TIM Capture Compare Register value on runtime without calling another time ConfigChannel function. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __COMPARE__ specifies the Capture Compare register new value. + * @retval None + */ +#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\ + ((__HANDLE__)->Instance->CCR4 = (__COMPARE__))) + +/** + * @brief Get the TIM Capture Compare Register value on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channel associated with the capture compare register + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get capture/compare 1 register value + * @arg TIM_CHANNEL_2: get capture/compare 2 register value + * @arg TIM_CHANNEL_3: get capture/compare 3 register value + * @arg TIM_CHANNEL_4: get capture/compare 4 register value + * @retval 16-bit or 32-bit value of the capture/compare register (TIMx_CCRy) + */ +#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\ + ((__HANDLE__)->Instance->CCR4)) + +/** + * @brief Set the TIM Output compare preload. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval None + */ +#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\ + ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE)) + +/** + * @brief Reset the TIM Output compare preload. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval None + */ +#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3PE) :\ + ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4PE)) + +/** + * @brief Enable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @note When fast mode is enabled an active edge on the trigger input acts + * like a compare match on CCx output. Delay to sample the trigger + * input and to activate CCx output is reduced to 3 clock cycles. + * @note Fast mode acts only if the channel is configured in PWM1 or PWM2 mode. + * @retval None + */ +#define __HAL_TIM_ENABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3FE) :\ + ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4FE)) + +/** + * @brief Disable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @note When fast mode is disabled CCx output behaves normally depending + * on counter and CCRx values even when the trigger is ON. The minimum + * delay to activate CCx output when an active edge occurs on the + * trigger input is 5 clock cycles. + * @retval None + */ +#define __HAL_TIM_DISABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE) :\ + ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE)) + +/** + * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register. + * @param __HANDLE__ TIM handle. + * @note When the URS bit of the TIMx_CR1 register is set, only counter + * overflow/underflow generates an update interrupt or DMA request (if + * enabled) + * @retval None + */ +#define __HAL_TIM_URS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|= TIM_CR1_URS) + +/** + * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register. + * @param __HANDLE__ TIM handle. + * @note When the URS bit of the TIMx_CR1 register is reset, any of the + * following events generate an update interrupt or DMA request (if + * enabled): + * _ Counter overflow underflow + * _ Setting the UG bit + * _ Update generation through the slave mode controller + * @retval None + */ +#define __HAL_TIM_URS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1&=~TIM_CR1_URS) + +/** + * @brief Set the TIM Capture x input polarity on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __POLARITY__ Polarity for TIx source + * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge + * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge + * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge + * @retval None + */ +#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ + do{ \ + TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \ + }while(0) + +/** @brief Select the Capture/compare DMA request source. + * @param __HANDLE__ specifies the TIM Handle. + * @param __CCDMA__ specifies Capture/compare DMA request source + * This parameter can be one of the following values: + * @arg TIM_CCDMAREQUEST_CC: CCx DMA request generated on Capture/Compare event + * @arg TIM_CCDMAREQUEST_UPDATE: CCx DMA request generated on Update event + * @retval None + */ +#define __HAL_TIM_SELECT_CCDMAREQUEST(__HANDLE__, __CCDMA__) \ + MODIFY_REG((__HANDLE__)->Instance->CR2, TIM_CR2_CCDS, (__CCDMA__)) + +/** + * @} + */ +/* End of exported macros ----------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIM_Private_Constants TIM Private Constants + * @{ + */ +/* The counter of a timer instance is disabled only if all the CCx and CCxN + channels have been disabled */ +#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E)) +#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) +/** + * @} + */ +/* End of private constants --------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup TIM_Private_Macros TIM Private Macros + * @{ + */ +#define IS_TIM_CLEARINPUT_SOURCE(__MODE__) (((__MODE__) == TIM_CLEARINPUTSOURCE_NONE) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_ETR)) + +#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \ + ((__BASE__) == TIM_DMABASE_CR2) || \ + ((__BASE__) == TIM_DMABASE_SMCR) || \ + ((__BASE__) == TIM_DMABASE_DIER) || \ + ((__BASE__) == TIM_DMABASE_SR) || \ + ((__BASE__) == TIM_DMABASE_EGR) || \ + ((__BASE__) == TIM_DMABASE_CCMR1) || \ + ((__BASE__) == TIM_DMABASE_CCMR2) || \ + ((__BASE__) == TIM_DMABASE_CCER) || \ + ((__BASE__) == TIM_DMABASE_CNT) || \ + ((__BASE__) == TIM_DMABASE_PSC) || \ + ((__BASE__) == TIM_DMABASE_ARR) || \ + ((__BASE__) == TIM_DMABASE_RCR) || \ + ((__BASE__) == TIM_DMABASE_CCR1) || \ + ((__BASE__) == TIM_DMABASE_CCR2) || \ + ((__BASE__) == TIM_DMABASE_CCR3) || \ + ((__BASE__) == TIM_DMABASE_CCR4) || \ + ((__BASE__) == TIM_DMABASE_BDTR)) + +#define IS_TIM_EVENT_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFFFF00U) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) + +#define IS_TIM_COUNTER_MODE(__MODE__) (((__MODE__) == TIM_COUNTERMODE_UP) || \ + ((__MODE__) == TIM_COUNTERMODE_DOWN) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED1) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3)) + +#define IS_TIM_CLOCKDIVISION_DIV(__DIV__) (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \ + ((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \ + ((__DIV__) == TIM_CLOCKDIVISION_DIV4)) + +#define IS_TIM_AUTORELOAD_PRELOAD(PRELOAD) (((PRELOAD) == TIM_AUTORELOAD_PRELOAD_DISABLE) || \ + ((PRELOAD) == TIM_AUTORELOAD_PRELOAD_ENABLE)) + +#define IS_TIM_FAST_STATE(__STATE__) (((__STATE__) == TIM_OCFAST_DISABLE) || \ + ((__STATE__) == TIM_OCFAST_ENABLE)) + +#define IS_TIM_OC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCPOLARITY_HIGH) || \ + ((__POLARITY__) == TIM_OCPOLARITY_LOW)) + +#define IS_TIM_OCN_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCNPOLARITY_HIGH) || \ + ((__POLARITY__) == TIM_OCNPOLARITY_LOW)) + +#define IS_TIM_OCIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCIDLESTATE_SET) || \ + ((__STATE__) == TIM_OCIDLESTATE_RESET)) + +#define IS_TIM_OCNIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCNIDLESTATE_SET) || \ + ((__STATE__) == TIM_OCNIDLESTATE_RESET)) + +#define IS_TIM_ENCODERINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_FALLING)) + +#define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_FALLING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE)) + +#define IS_TIM_IC_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_ICSELECTION_DIRECTTI) || \ + ((__SELECTION__) == TIM_ICSELECTION_INDIRECTTI) || \ + ((__SELECTION__) == TIM_ICSELECTION_TRC)) + +#define IS_TIM_IC_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_ICPSC_DIV1) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV2) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV4) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV8)) + +#define IS_TIM_OPM_MODE(__MODE__) (((__MODE__) == TIM_OPMODE_SINGLE) || \ + ((__MODE__) == TIM_OPMODE_REPETITIVE)) + +#define IS_TIM_ENCODER_MODE(__MODE__) (((__MODE__) == TIM_ENCODERMODE_TI1) || \ + ((__MODE__) == TIM_ENCODERMODE_TI2) || \ + ((__MODE__) == TIM_ENCODERMODE_TI12)) + +#define IS_TIM_DMA_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFF80FFU) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) + +#define IS_TIM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2) || \ + ((__CHANNEL__) == TIM_CHANNEL_3) || \ + ((__CHANNEL__) == TIM_CHANNEL_4) || \ + ((__CHANNEL__) == TIM_CHANNEL_ALL)) + +#define IS_TIM_OPM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2)) + +#define IS_TIM_COMPLEMENTARY_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2) || \ + ((__CHANNEL__) == TIM_CHANNEL_3)) + +#define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3)) + +#define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_FALLING) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_BOTHEDGE)) + +#define IS_TIM_CLOCKPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV8)) + +#define IS_TIM_CLOCKFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_CLEARINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLEARINPUTPOLARITY_INVERTED) || \ + ((__POLARITY__) == TIM_CLEARINPUTPOLARITY_NONINVERTED)) + +#define IS_TIM_CLEARINPUT_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV8)) + +#define IS_TIM_CLEARINPUT_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_OSSR_STATE(__STATE__) (((__STATE__) == TIM_OSSR_ENABLE) || \ + ((__STATE__) == TIM_OSSR_DISABLE)) + +#define IS_TIM_OSSI_STATE(__STATE__) (((__STATE__) == TIM_OSSI_ENABLE) || \ + ((__STATE__) == TIM_OSSI_DISABLE)) + +#define IS_TIM_LOCK_LEVEL(__LEVEL__) (((__LEVEL__) == TIM_LOCKLEVEL_OFF) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_1) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_2) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_3)) + +#define IS_TIM_BREAK_FILTER(__BRKFILTER__) ((__BRKFILTER__) <= 0xFUL) + + +#define IS_TIM_BREAK_STATE(__STATE__) (((__STATE__) == TIM_BREAK_ENABLE) || \ + ((__STATE__) == TIM_BREAK_DISABLE)) + +#define IS_TIM_BREAK_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKPOLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAKPOLARITY_HIGH)) + +#define IS_TIM_AUTOMATIC_OUTPUT_STATE(__STATE__) (((__STATE__) == TIM_AUTOMATICOUTPUT_ENABLE) || \ + ((__STATE__) == TIM_AUTOMATICOUTPUT_DISABLE)) + +#define IS_TIM_TRGO_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO_RESET) || \ + ((__SOURCE__) == TIM_TRGO_ENABLE) || \ + ((__SOURCE__) == TIM_TRGO_UPDATE) || \ + ((__SOURCE__) == TIM_TRGO_OC1) || \ + ((__SOURCE__) == TIM_TRGO_OC1REF) || \ + ((__SOURCE__) == TIM_TRGO_OC2REF) || \ + ((__SOURCE__) == TIM_TRGO_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO_OC4REF)) + +#define IS_TIM_MSM_STATE(__STATE__) (((__STATE__) == TIM_MASTERSLAVEMODE_ENABLE) || \ + ((__STATE__) == TIM_MASTERSLAVEMODE_DISABLE)) + +#define IS_TIM_SLAVE_MODE(__MODE__) (((__MODE__) == TIM_SLAVEMODE_DISABLE) || \ + ((__MODE__) == TIM_SLAVEMODE_RESET) || \ + ((__MODE__) == TIM_SLAVEMODE_GATED) || \ + ((__MODE__) == TIM_SLAVEMODE_TRIGGER) || \ + ((__MODE__) == TIM_SLAVEMODE_EXTERNAL1)) + +#define IS_TIM_PWM_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_PWM1) || \ + ((__MODE__) == TIM_OCMODE_PWM2)) + +#define IS_TIM_OC_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_TIMING) || \ + ((__MODE__) == TIM_OCMODE_ACTIVE) || \ + ((__MODE__) == TIM_OCMODE_INACTIVE) || \ + ((__MODE__) == TIM_OCMODE_TOGGLE) || \ + ((__MODE__) == TIM_OCMODE_FORCED_ACTIVE) || \ + ((__MODE__) == TIM_OCMODE_FORCED_INACTIVE)) + +#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_TI1F_ED) || \ + ((__SELECTION__) == TIM_TS_TI1FP1) || \ + ((__SELECTION__) == TIM_TS_TI2FP2) || \ + ((__SELECTION__) == TIM_TS_ETRF)) + +#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_NONE)) + +#define IS_TIM_TRIGGERPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_TRIGGERPOLARITY_INVERTED ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_NONINVERTED) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_RISING ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_FALLING ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_BOTHEDGE )) + +#define IS_TIM_TRIGGERPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV8)) + +#define IS_TIM_TRIGGERFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_TI1SELECTION(__TI1SELECTION__) (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \ + ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION)) + +#define IS_TIM_DMA_LENGTH(__LENGTH__) (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_13TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_14TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_15TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_16TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS)) + +#define IS_TIM_DMA_DATA_LENGTH(LENGTH) (((LENGTH) >= 0x1U) && ((LENGTH) < 0x10000U)) + +#define IS_TIM_IC_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_DEADTIME(__DEADTIME__) ((__DEADTIME__) <= 0xFFU) + +#define IS_TIM_SLAVEMODE_TRIGGER_ENABLED(__TRIGGER__) ((__TRIGGER__) == TIM_SLAVEMODE_TRIGGER) + +#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\ + ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U))) + +#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\ + ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC)) + +#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\ + ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U)))) + +#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\ + ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP))) + +#define TIM_CHANNEL_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelState[0] :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelState[1] :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelState[2] :\ + (__HANDLE__)->ChannelState[3]) + +#define TIM_CHANNEL_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__)) :\ + ((__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ + (__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__); \ + } while(0) + +#define TIM_CHANNEL_N_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelNState[0] :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelNState[1] :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelNState[2] :\ + (__HANDLE__)->ChannelNState[3]) + +#define TIM_CHANNEL_N_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__)) :\ + ((__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_N_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ + (__HANDLE__)->ChannelNState[0] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[1] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[2] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[3] = \ + (__CHANNEL_STATE__); \ + } while(0) + +/** + * @} + */ +/* End of private macros -----------------------------------------------------*/ + +/* Include TIM HAL Extended module */ +#include "stm32f4xx_hal_tim_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIM_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @addtogroup TIM_Exported_Functions_Group1 TIM Time Base functions + * @brief Time Base functions + * @{ + */ +/* Time Base functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group2 TIM Output Compare functions + * @brief TIM Output Compare functions + * @{ + */ +/* Timer Output Compare functions *********************************************/ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group3 TIM PWM functions + * @brief TIM PWM functions + * @{ + */ +/* Timer PWM functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group4 TIM Input Capture functions + * @brief TIM Input Capture functions + * @{ + */ +/* Timer Input Capture functions **********************************************/ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group5 TIM One Pulse functions + * @brief TIM One Pulse functions + * @{ + */ +/* Timer One Pulse functions **************************************************/ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode); +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group6 TIM Encoder functions + * @brief TIM Encoder functions + * @{ + */ +/* Timer Encoder functions ****************************************************/ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig); +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, + uint32_t *pData2, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group7 TIM IRQ handler management + * @brief IRQ handler management + * @{ + */ +/* Interrupt Handler functions ***********************************************/ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Control functions *********************************************************/ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, + uint32_t OutputChannel, uint32_t InputChannel); +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef *sClearInputConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig); +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource); +uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions + * @brief TIM Callbacks functions + * @{ + */ +/* Callback in non blocking modes (Interrupt and DMA) *************************/ +void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, + pTIM_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions + * @brief Peripheral State functions + * @{ + */ +/* Peripheral State functions ************************************************/ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim); + +/* Peripheral Channel state functions ************************************************/ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private functions----------------------------------------------------------*/ +/** @defgroup TIM_Private_Functions TIM Private Functions + * @{ + */ +void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure); +void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter); +void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, + uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter); + +void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma); +void TIM_DMAError(DMA_HandleTypeDef *hdma); +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma); +void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma); +void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +void TIM_ResetCallback(TIM_HandleTypeDef *htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F4xx_HAL_TIM_H */ diff --git a/Drivers/stm32f4xx_hal_tim_ex.c b/libs/hal/stm32f4xx_hal_tim_ex.c similarity index 97% rename from Drivers/stm32f4xx_hal_tim_ex.c rename to libs/hal/stm32f4xx_hal_tim_ex.c index 1b59f15..092175f 100644 --- a/Drivers/stm32f4xx_hal_tim_ex.c +++ b/libs/hal/stm32f4xx_hal_tim_ex.c @@ -1,2428 +1,2428 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_tim_ex.c - * @author MCD Application Team - * @brief TIM HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Timer Extended peripheral: - * + Time Hall Sensor Interface Initialization - * + Time Hall Sensor Interface Start - * + Time Complementary signal break and dead time configuration - * + Time Master and Slave synchronization configuration - * + Timer remapping capabilities configuration - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### TIMER Extended features ##### - ============================================================================== - [..] - The Timer Extended features include: - (#) Complementary outputs with programmable dead-time for : - (++) Output Compare - (++) PWM generation (Edge and Center-aligned Mode) - (++) One-pulse mode output - (#) Synchronization circuit to control the timer with external signals and to - interconnect several timers together. - (#) Break input to put the timer output signals in reset state or in a known state. - (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for - positioning purposes - - ##### How to use this driver ##### - ============================================================================== - [..] - (#) Initialize the TIM low level resources by implementing the following functions - depending on the selected feature: - (++) Hall Sensor output : HAL_TIMEx_HallSensor_MspInit() - - (#) Initialize the TIM low level resources : - (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); - (##) TIM pins configuration - (+++) Enable the clock for the TIM GPIOs using the following function: - __HAL_RCC_GPIOx_CLK_ENABLE(); - (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); - - (#) The external Clock can be configured, if needed (the default clock is the - internal clock from the APBx), using the following function: - HAL_TIM_ConfigClockSource, the clock configuration should be done before - any start function. - - (#) Configure the TIM in the desired functioning mode using one of the - initialization function of this driver: - (++) HAL_TIMEx_HallSensor_Init() and HAL_TIMEx_ConfigCommutEvent(): to use the - Timer Hall Sensor Interface and the commutation event with the corresponding - Interrupt and DMA request if needed (Note that One Timer is used to interface - with the Hall sensor Interface and another Timer should be used to use - the commutation event). - - (#) Activate the TIM peripheral using one of the start functions: - (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), - HAL_TIMEx_OCN_Start_IT() - (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), - HAL_TIMEx_PWMN_Start_IT() - (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT() - (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), - HAL_TIMEx_HallSensor_Start_IT(). - - @endverbatim - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup TIMEx TIMEx - * @brief TIM Extended HAL module driver - * @{ - */ - -#ifdef HAL_TIM_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma); -static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma); -static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState); - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup TIMEx_Exported_Functions TIM Extended Exported Functions - * @{ - */ - -/** @defgroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions - * @brief Timer Hall Sensor functions - * -@verbatim - ============================================================================== - ##### Timer Hall Sensor functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure TIM HAL Sensor. - (+) De-initialize TIM HAL Sensor. - (+) Start the Hall Sensor Interface. - (+) Stop the Hall Sensor Interface. - (+) Start the Hall Sensor Interface and enable interrupts. - (+) Stop the Hall Sensor Interface and disable interrupts. - (+) Start the Hall Sensor Interface and enable DMA transfers. - (+) Stop the Hall Sensor Interface and disable DMA transfers. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM Hall Sensor Interface and initialize the associated handle. - * @note When the timer instance is initialized in Hall Sensor Interface mode, - * timer channels 1 and channel 2 are reserved and cannot be used for - * other purpose. - * @param htim TIM Hall Sensor Interface handle - * @param sConfig TIM Hall Sensor configuration structure - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig) -{ - TIM_OC_InitTypeDef OC_Config; - - /* Check the TIM handle allocation */ - if (htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity)); - assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); - assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); - - if (htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - /* Reset interrupt callbacks to legacy week callbacks */ - TIM_ResetCallback(htim); - - if (htim->HallSensor_MspInitCallback == NULL) - { - htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; - } - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - htim->HallSensor_MspInitCallback(htim); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIMEx_HallSensor_MspInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - } - - /* Set the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Configure the Time base in the Encoder Mode */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the Hall sensor */ - TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter); - - /* Reset the IC1PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; - /* Set the IC1PSC value */ - htim->Instance->CCMR1 |= sConfig->IC1Prescaler; - - /* Enable the Hall sensor interface (XOR function of the three inputs) */ - htim->Instance->CR2 |= TIM_CR2_TI1S; - - /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= TIM_TS_TI1F_ED; - - /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */ - htim->Instance->SMCR &= ~TIM_SMCR_SMS; - htim->Instance->SMCR |= TIM_SLAVEMODE_RESET; - - /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/ - OC_Config.OCFastMode = TIM_OCFAST_DISABLE; - OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET; - OC_Config.OCMode = TIM_OCMODE_PWM2; - OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET; - OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH; - OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH; - OC_Config.Pulse = sConfig->Commutation_Delay; - - TIM_OC2_SetConfig(htim->Instance, &OC_Config); - - /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2 - register to 101 */ - htim->Instance->CR2 &= ~TIM_CR2_MMS; - htim->Instance->CR2 |= TIM_TRGO_OC2REF; - - /* Initialize the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_READY; - - /* Initialize the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - - /* Initialize the TIM state*/ - htim->State = HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM Hall Sensor interface - * @param htim TIM Hall Sensor Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - if (htim->HallSensor_MspDeInitCallback == NULL) - { - htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; - } - /* DeInit the low level hardware */ - htim->HallSensor_MspDeInitCallback(htim); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_TIMEx_HallSensor_MspDeInit(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - /* Change the DMA burst operation state */ - htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; - - /* Change the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM Hall Sensor MSP. - * @param htim TIM Hall Sensor Interface handle - * @retval None - */ -__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM Hall Sensor MSP. - * @param htim TIM Hall Sensor Interface handle - * @retval None - */ -__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the TIM Hall Sensor Interface. - * @param htim TIM Hall Sensor Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim) -{ - uint32_t tmpsmcr; - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - - /* Check the TIM channels state */ - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the Input Capture channel 1 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, - TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Hall sensor Interface. - * @param htim TIM Hall Sensor Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channels 1, 2 and 3 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, - TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Hall Sensor Interface in interrupt mode. - * @param htim TIM Hall Sensor Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim) -{ - uint32_t tmpsmcr; - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - - /* Check the TIM channels state */ - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the capture compare Interrupts 1 event */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - - /* Enable the Input Capture channel 1 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, - TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Hall Sensor Interface in interrupt mode. - * @param htim TIM Hall Sensor Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channel 1 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, - TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - - /* Disable the capture compare Interrupts event */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Hall Sensor Interface in DMA mode. - * @param htim TIM Hall Sensor Interface handle - * @param pData The destination Buffer address. - * @param Length The length of data to be transferred from TIM peripheral to memory. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) -{ - uint32_t tmpsmcr; - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - - /* Set the TIM channel state */ - if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) - || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) - { - return HAL_BUSY; - } - else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) - && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) - { - if ((pData == NULL) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - return HAL_ERROR; - } - - /* Enable the Input Capture channel 1 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, - TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - - /* Set the DMA Input Capture 1 Callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA stream for Capture 1*/ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the capture compare 1 Interrupt */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Hall Sensor Interface in DMA mode. - * @param htim TIM Hall Sensor Interface handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channel 1 - (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, - TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - - - /* Disable the capture compare Interrupts 1 event */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channel state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions - * @brief Timer Complementary Output Compare functions - * -@verbatim - ============================================================================== - ##### Timer Complementary Output Compare functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Start the Complementary Output Compare/PWM. - (+) Stop the Complementary Output Compare/PWM. - (+) Start the Complementary Output Compare/PWM and enable interrupts. - (+) Stop the Complementary Output Compare/PWM and disable interrupts. - (+) Start the Complementary Output Compare/PWM and enable DMA transfers. - (+) Stop the Complementary Output Compare/PWM and disable DMA transfers. - -@endverbatim - * @{ - */ - -/** - * @brief Starts the TIM Output Compare signal generation on the complementary - * output. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM complementary channel state */ - if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Output Compare signal generation on the complementary - * output. - * @param htim TIM handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Disable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Output Compare signal generation in interrupt mode - * on the complementary output. - * @param htim TIM OC handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM complementary channel state */ - if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Enable the TIM Output Compare interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Enable the TIM Output Compare interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Enable the TIM Output Compare interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); - break; - } - - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Enable the TIM Break interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); - - /* Enable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the TIM Output Compare signal generation in interrupt mode - * on the complementary output. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpccer; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Output Compare interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Output Compare interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Output Compare interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the TIM Break interrupt (only if no more channel is active) */ - tmpccer = htim->Instance->CCER; - if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) - { - __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); - } - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} - -/** - * @brief Starts the TIM Output Compare signal generation in DMA mode - * on the complementary output. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @param pData The source Buffer address. - * @param Length The length of data to be transferred from memory to TIM peripheral - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Set the TIM complementary channel state */ - if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) - { - return HAL_BUSY; - } - else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) - { - if ((pData == NULL) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - return HAL_ERROR; - } - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Output Compare DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Output Compare DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Output Compare DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Enable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the TIM Output Compare signal generation in DMA mode - * on the complementary output. - * @param htim TIM Output Compare handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Output Compare DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Output Compare DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Output Compare DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} - -/** - * @} - */ - -/** @defgroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions - * @brief Timer Complementary PWM functions - * -@verbatim - ============================================================================== - ##### Timer Complementary PWM functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Start the Complementary PWM. - (+) Stop the Complementary PWM. - (+) Start the Complementary PWM and enable interrupts. - (+) Stop the Complementary PWM and disable interrupts. - (+) Start the Complementary PWM and enable DMA transfers. - (+) Stop the Complementary PWM and disable DMA transfers. - (+) Start the Complementary Input Capture measurement. - (+) Stop the Complementary Input Capture. - (+) Start the Complementary Input Capture and enable interrupts. - (+) Stop the Complementary Input Capture and disable interrupts. - (+) Start the Complementary Input Capture and enable DMA transfers. - (+) Stop the Complementary Input Capture and disable DMA transfers. - (+) Start the Complementary One Pulse generation. - (+) Stop the Complementary One Pulse. - (+) Start the Complementary One Pulse and enable interrupts. - (+) Stop the Complementary One Pulse and disable interrupts. - -@endverbatim - * @{ - */ - -/** - * @brief Starts the PWM signal generation on the complementary output. - * @param htim TIM handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM complementary channel state */ - if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the PWM signal generation on the complementary output. - * @param htim TIM handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Disable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the PWM signal generation in interrupt mode on the - * complementary output. - * @param htim TIM handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Check the TIM complementary channel state */ - if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) - { - return HAL_ERROR; - } - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Enable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Enable the TIM Break interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); - - /* Enable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the PWM signal generation in interrupt mode on the - * complementary output. - * @param htim TIM handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpccer; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the TIM Break interrupt (only if no more channel is active) */ - tmpccer = htim->Instance->CCER; - if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) - { - __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); - } - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} - -/** - * @brief Starts the TIM PWM signal generation in DMA mode on the - * complementary output - * @param htim TIM handle - * @param Channel TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @param pData The source Buffer address. - * @param Length The length of data to be transferred from memory to TIM peripheral - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) -{ - HAL_StatusTypeDef status = HAL_OK; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Set the TIM complementary channel state */ - if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) - { - return HAL_BUSY; - } - else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) - { - if ((pData == NULL) && (Length > 0U)) - { - return HAL_ERROR; - } - else - { - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); - } - } - else - { - return HAL_ERROR; - } - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; - htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - break; - } - - case TIM_CHANNEL_2: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; - htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - break; - } - - case TIM_CHANNEL_3: - { - /* Set the DMA compare callbacks */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; - htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; - - /* Enable the DMA stream */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, - Length) != HAL_OK) - { - /* Return error status */ - return HAL_ERROR; - } - /* Enable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Enable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - } - - /* Return function status */ - return status; -} - -/** - * @brief Stops the TIM PWM signal generation in DMA mode on the complementary - * output - * @param htim TIM handle - * @param Channel TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); - break; - } - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); - break; - } - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); - (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); - break; - } - - default: - status = HAL_ERROR; - break; - } - - if (status == HAL_OK) - { - /* Disable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM complementary channel state */ - TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); - } - - /* Return function status */ - return status; -} - -/** - * @} - */ - -/** @defgroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions - * @brief Timer Complementary One Pulse functions - * -@verbatim - ============================================================================== - ##### Timer Complementary One Pulse functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Start the Complementary One Pulse generation. - (+) Stop the Complementary One Pulse. - (+) Start the Complementary One Pulse and enable interrupts. - (+) Stop the Complementary One Pulse and disable interrupts. - -@endverbatim - * @{ - */ - -/** - * @brief Starts the TIM One Pulse signal generation on the complementary - * output. - * @note OutputChannel must match the pulse output channel chosen when calling - * @ref HAL_TIM_OnePulse_ConfigChannel(). - * @param htim TIM One Pulse handle - * @param OutputChannel pulse output channel to enable - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); - - /* Check the TIM channels state */ - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the complementary One Pulse output channel and the Input Capture channel */ - TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); - TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM One Pulse signal generation on the complementary - * output. - * @note OutputChannel must match the pulse output channel chosen when calling - * @ref HAL_TIM_OnePulse_ConfigChannel(). - * @param htim TIM One Pulse handle - * @param OutputChannel pulse output channel to disable - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); - - /* Disable the complementary One Pulse output channel and the Input Capture channel */ - TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); - TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM One Pulse signal generation in interrupt mode on the - * complementary channel. - * @note OutputChannel must match the pulse output channel chosen when calling - * @ref HAL_TIM_OnePulse_ConfigChannel(). - * @param htim TIM One Pulse handle - * @param OutputChannel pulse output channel to enable - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; - HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); - HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); - HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); - - /* Check the TIM channels state */ - if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) - { - return HAL_ERROR; - } - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - - /* Enable the complementary One Pulse output channel and the Input Capture channel */ - TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); - TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); - - /* Enable the Main Output */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM One Pulse signal generation in interrupt mode on the - * complementary channel. - * @note OutputChannel must match the pulse output channel chosen when calling - * @ref HAL_TIM_OnePulse_ConfigChannel(). - * @param htim TIM One Pulse handle - * @param OutputChannel pulse output channel to disable - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); - - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - - /* Disable the complementary One Pulse output channel and the Input Capture channel */ - TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); - TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); - - /* Disable the Main Output */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Set the TIM channels state */ - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions - * @brief Peripheral Control functions - * -@verbatim - ============================================================================== - ##### Peripheral Control functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Configure the commutation event in case of use of the Hall sensor interface. - (+) Configure Output channels for OC and PWM mode. - - (+) Configure Complementary channels, break features and dead time. - (+) Configure Master synchronization. - (+) Configure timer remapping capabilities. - -@endverbatim - * @{ - */ - -/** - * @brief Configure the TIM commutation event sequence. - * @note This function is mandatory to use the commutation event in order to - * update the configuration at each commutation detection on the TRGI input of the Timer, - * the typical use of this feature is with the use of another Timer(interface Timer) - * configured in Hall sensor interface, this interface Timer will generate the - * commutation at its TRGO output (connected to Timer used in this function) each time - * the TI1 of the Interface Timer detect a commutation at its input TI1. - * @param htim TIM handle - * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor - * This parameter can be one of the following values: - * @arg TIM_TS_ITR0: Internal trigger 0 selected - * @arg TIM_TS_ITR1: Internal trigger 1 selected - * @arg TIM_TS_ITR2: Internal trigger 2 selected - * @arg TIM_TS_ITR3: Internal trigger 3 selected - * @arg TIM_TS_NONE: No trigger is needed - * @param CommutationSource the Commutation Event source - * This parameter can be one of the following values: - * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer - * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, - uint32_t CommutationSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); - assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); - - __HAL_LOCK(htim); - - if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || - (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) - { - /* Select the Input trigger */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= InputTrigger; - } - - /* Select the Capture Compare preload feature */ - htim->Instance->CR2 |= TIM_CR2_CCPC; - /* Select the Commutation event source */ - htim->Instance->CR2 &= ~TIM_CR2_CCUS; - htim->Instance->CR2 |= CommutationSource; - - /* Disable Commutation Interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); - - /* Disable Commutation DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configure the TIM commutation event sequence with interrupt. - * @note This function is mandatory to use the commutation event in order to - * update the configuration at each commutation detection on the TRGI input of the Timer, - * the typical use of this feature is with the use of another Timer(interface Timer) - * configured in Hall sensor interface, this interface Timer will generate the - * commutation at its TRGO output (connected to Timer used in this function) each time - * the TI1 of the Interface Timer detect a commutation at its input TI1. - * @param htim TIM handle - * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor - * This parameter can be one of the following values: - * @arg TIM_TS_ITR0: Internal trigger 0 selected - * @arg TIM_TS_ITR1: Internal trigger 1 selected - * @arg TIM_TS_ITR2: Internal trigger 2 selected - * @arg TIM_TS_ITR3: Internal trigger 3 selected - * @arg TIM_TS_NONE: No trigger is needed - * @param CommutationSource the Commutation Event source - * This parameter can be one of the following values: - * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer - * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, - uint32_t CommutationSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); - assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); - - __HAL_LOCK(htim); - - if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || - (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) - { - /* Select the Input trigger */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= InputTrigger; - } - - /* Select the Capture Compare preload feature */ - htim->Instance->CR2 |= TIM_CR2_CCPC; - /* Select the Commutation event source */ - htim->Instance->CR2 &= ~TIM_CR2_CCUS; - htim->Instance->CR2 |= CommutationSource; - - /* Disable Commutation DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); - - /* Enable the Commutation Interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM); - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configure the TIM commutation event sequence with DMA. - * @note This function is mandatory to use the commutation event in order to - * update the configuration at each commutation detection on the TRGI input of the Timer, - * the typical use of this feature is with the use of another Timer(interface Timer) - * configured in Hall sensor interface, this interface Timer will generate the - * commutation at its TRGO output (connected to Timer used in this function) each time - * the TI1 of the Interface Timer detect a commutation at its input TI1. - * @note The user should configure the DMA in his own software, in This function only the COMDE bit is set - * @param htim TIM handle - * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor - * This parameter can be one of the following values: - * @arg TIM_TS_ITR0: Internal trigger 0 selected - * @arg TIM_TS_ITR1: Internal trigger 1 selected - * @arg TIM_TS_ITR2: Internal trigger 2 selected - * @arg TIM_TS_ITR3: Internal trigger 3 selected - * @arg TIM_TS_NONE: No trigger is needed - * @param CommutationSource the Commutation Event source - * This parameter can be one of the following values: - * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer - * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, - uint32_t CommutationSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); - assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); - - __HAL_LOCK(htim); - - if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || - (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) - { - /* Select the Input trigger */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= InputTrigger; - } - - /* Select the Capture Compare preload feature */ - htim->Instance->CR2 |= TIM_CR2_CCPC; - /* Select the Commutation event source */ - htim->Instance->CR2 &= ~TIM_CR2_CCUS; - htim->Instance->CR2 |= CommutationSource; - - /* Enable the Commutation DMA Request */ - /* Set the DMA Commutation Callback */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError; - - /* Disable Commutation Interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); - - /* Enable the Commutation DMA Request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM); - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configures the TIM in master mode. - * @param htim TIM handle. - * @param sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that - * contains the selected trigger output (TRGO) and the Master/Slave - * mode. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, - TIM_MasterConfigTypeDef *sMasterConfig) -{ - uint32_t tmpcr2; - uint32_t tmpsmcr; - - /* Check the parameters */ - assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger)); - assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode)); - - /* Check input state */ - __HAL_LOCK(htim); - - /* Change the handler state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Get the TIMx CR2 register value */ - tmpcr2 = htim->Instance->CR2; - - /* Get the TIMx SMCR register value */ - tmpsmcr = htim->Instance->SMCR; - - /* Reset the MMS Bits */ - tmpcr2 &= ~TIM_CR2_MMS; - /* Select the TRGO source */ - tmpcr2 |= sMasterConfig->MasterOutputTrigger; - - /* Update TIMx CR2 */ - htim->Instance->CR2 = tmpcr2; - - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - /* Reset the MSM Bit */ - tmpsmcr &= ~TIM_SMCR_MSM; - /* Set master mode */ - tmpsmcr |= sMasterConfig->MasterSlaveMode; - - /* Update TIMx SMCR */ - htim->Instance->SMCR = tmpsmcr; - } - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State - * and the AOE(automatic output enable). - * @param htim TIM handle - * @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that - * contains the BDTR Register configuration information for the TIM peripheral. - * @note Interrupts can be generated when an active level is detected on the - * break input, the break 2 input or the system break input. Break - * interrupt can be enabled by calling the @ref __HAL_TIM_ENABLE_IT macro. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, - TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig) -{ - /* Keep this variable initialized to 0 as it is used to configure BDTR register */ - uint32_t tmpbdtr = 0U; - - /* Check the parameters */ - assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); - assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode)); - assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode)); - assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel)); - assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime)); - assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState)); - assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity)); - assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput)); - - /* Check input state */ - __HAL_LOCK(htim); - - /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State, - the OSSI State, the dead time value and the Automatic Output Enable Bit */ - - /* Set the BDTR bits */ - MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, sBreakDeadTimeConfig->DeadTime); - MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, sBreakDeadTimeConfig->LockLevel); - MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, sBreakDeadTimeConfig->OffStateIDLEMode); - MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, sBreakDeadTimeConfig->OffStateRunMode); - MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, sBreakDeadTimeConfig->BreakState); - MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, sBreakDeadTimeConfig->BreakPolarity); - MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, sBreakDeadTimeConfig->AutomaticOutput); - - - /* Set TIMx_BDTR */ - htim->Instance->BDTR = tmpbdtr; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configures the TIMx Remapping input capabilities. - * @param htim TIM handle. - * @param Remap specifies the TIM remapping source. - * For TIM1, the parameter can have the following values: (**) - * @arg TIM_TIM1_TIM3_TRGO: TIM1 ITR2 is connected to TIM3 TRGO - * @arg TIM_TIM1_LPTIM: TIM1 ITR2 is connected to LPTIM1 output - * - * For TIM2, the parameter can have the following values: (**) - * @arg TIM_TIM2_TIM8_TRGO: TIM2 ITR1 is connected to TIM8 TRGO (*) - * @arg TIM_TIM2_ETH_PTP: TIM2 ITR1 is connected to PTP trigger output (*) - * @arg TIM_TIM2_USBFS_SOF: TIM2 ITR1 is connected to OTG FS SOF - * @arg TIM_TIM2_USBHS_SOF: TIM2 ITR1 is connected to OTG FS SOF - * - * For TIM5, the parameter can have the following values: - * @arg TIM_TIM5_GPIO: TIM5 TI4 is connected to GPIO - * @arg TIM_TIM5_LSI: TIM5 TI4 is connected to LSI - * @arg TIM_TIM5_LSE: TIM5 TI4 is connected to LSE - * @arg TIM_TIM5_RTC: TIM5 TI4 is connected to the RTC wakeup interrupt - * @arg TIM_TIM5_TIM3_TRGO: TIM5 ITR1 is connected to TIM3 TRGO (*) - * @arg TIM_TIM5_LPTIM: TIM5 ITR1 is connected to LPTIM1 output (*) - * - * For TIM9, the parameter can have the following values: (**) - * @arg TIM_TIM9_TIM3_TRGO: TIM9 ITR1 is connected to TIM3 TRGO - * @arg TIM_TIM9_LPTIM: TIM9 ITR1 is connected to LPTIM1 output - * - * For TIM11, the parameter can have the following values: - * @arg TIM_TIM11_GPIO: TIM11 TI1 is connected to GPIO - * @arg TIM_TIM11_HSE: TIM11 TI1 is connected to HSE_RTC clock - * @arg TIM_TIM11_SPDIFRX: TIM11 TI1 is connected to SPDIFRX_FRAME_SYNC (*) - * - * (*) Value not defined in all devices. \n - * (**) Register not available in all devices. - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap) -{ - - /* Check parameters */ - assert_param(IS_TIM_REMAP(htim->Instance, Remap)); - - __HAL_LOCK(htim); - -#if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM9_ITR1_RMP) - if ((Remap & LPTIM_REMAP_MASK) == LPTIM_REMAP_MASK) - { - /* Connect TIMx internal trigger to LPTIM1 output */ - __HAL_RCC_LPTIM1_CLK_ENABLE(); - MODIFY_REG(LPTIM1->OR, - (LPTIM_OR_TIM1_ITR2_RMP | LPTIM_OR_TIM5_ITR1_RMP | LPTIM_OR_TIM9_ITR1_RMP), - Remap & ~(LPTIM_REMAP_MASK)); - } - else - { - /* Set the Timer remapping configuration */ - WRITE_REG(htim->Instance->OR, Remap); - } -#else - /* Set the Timer remapping configuration */ - WRITE_REG(htim->Instance->OR, Remap); -#endif /* LPTIM_OR_TIM1_ITR2_RMP && LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM9_ITR1_RMP */ - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions - * @brief Extended Callbacks functions - * -@verbatim - ============================================================================== - ##### Extended Callbacks functions ##### - ============================================================================== - [..] - This section provides Extended TIM callback functions: - (+) Timer Commutation callback - (+) Timer Break callback - -@endverbatim - * @{ - */ - -/** - * @brief Hall commutation changed callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIMEx_CommutCallback could be implemented in the user file - */ -} -/** - * @brief Hall commutation changed half complete callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIMEx_CommutHalfCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Hall Break detection callback in non-blocking mode - * @param htim TIM handle - * @retval None - */ -__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_TIMEx_BreakCallback could be implemented in the user file - */ -} -/** - * @} - */ - -/** @defgroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions - * @brief Extended Peripheral State functions - * -@verbatim - ============================================================================== - ##### Extended Peripheral State functions ##### - ============================================================================== - [..] - This subsection permits to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Return the TIM Hall Sensor interface handle state. - * @param htim TIM Hall Sensor handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return actual state of the TIM complementary channel. - * @param htim TIM handle - * @param ChannelN TIM Complementary channel - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 - * @arg TIM_CHANNEL_2: TIM Channel 2 - * @arg TIM_CHANNEL_3: TIM Channel 3 - * @retval TIM Complementary channel state - */ -HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN) -{ - HAL_TIM_ChannelStateTypeDef channel_state; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, ChannelN)); - - channel_state = TIM_CHANNEL_N_STATE_GET(htim, ChannelN); - - return channel_state; -} -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup TIMEx_Private_Functions TIM Extended Private Functions - * @{ - */ - -/** - * @brief TIM DMA Commutation callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->CommutationCallback(htim); -#else - HAL_TIMEx_CommutCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} - -/** - * @brief TIM DMA Commutation half complete callback. - * @param hdma pointer to DMA handle. - * @retval None - */ -void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->CommutationHalfCpltCallback(htim); -#else - HAL_TIMEx_CommutHalfCpltCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ -} - - -/** - * @brief TIM DMA Delay Pulse complete callback (complementary channel). - * @param hdma pointer to DMA handle. - * @retval None - */ -static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - } - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - } - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); - } - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - - if (hdma->Init.Mode == DMA_NORMAL) - { - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); - } - } - else - { - /* nothing to do */ - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->PWM_PulseFinishedCallback(htim); -#else - HAL_TIM_PWM_PulseFinishedCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; -} - -/** - * @brief TIM DMA error callback (complementary channel) - * @param hdma pointer to DMA handle. - * @retval None - */ -static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; - - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); - } - else - { - /* nothing to do */ - } - -#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) - htim->ErrorCallback(htim); -#else - HAL_TIM_ErrorCallback(htim); -#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; -} - -/** - * @brief Enables or disables the TIM Capture Compare Channel xN. - * @param TIMx to select the TIM peripheral - * @param Channel specifies the TIM Channel - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 - * @arg TIM_CHANNEL_2: TIM Channel 2 - * @arg TIM_CHANNEL_3: TIM Channel 3 - * @param ChannelNState specifies the TIM Channel CCxNE bit new state. - * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable. - * @retval None - */ -static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState) -{ - uint32_t tmp; - - tmp = TIM_CCER_CC1NE << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ - - /* Reset the CCxNE Bit */ - TIMx->CCER &= ~tmp; - - /* Set or reset the CCxNE Bit */ - TIMx->CCER |= (uint32_t)(ChannelNState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ -} -/** - * @} - */ - -#endif /* HAL_TIM_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ +/** + ****************************************************************************** + * @file stm32f4xx_hal_tim_ex.c + * @author MCD Application Team + * @brief TIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Timer Extended peripheral: + * + Time Hall Sensor Interface Initialization + * + Time Hall Sensor Interface Start + * + Time Complementary signal break and dead time configuration + * + Time Master and Slave synchronization configuration + * + Timer remapping capabilities configuration + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### TIMER Extended features ##### + ============================================================================== + [..] + The Timer Extended features include: + (#) Complementary outputs with programmable dead-time for : + (++) Output Compare + (++) PWM generation (Edge and Center-aligned Mode) + (++) One-pulse mode output + (#) Synchronization circuit to control the timer with external signals and to + interconnect several timers together. + (#) Break input to put the timer output signals in reset state or in a known state. + (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for + positioning purposes + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the TIM low level resources by implementing the following functions + depending on the selected feature: + (++) Hall Sensor output : HAL_TIMEx_HallSensor_MspInit() + + (#) Initialize the TIM low level resources : + (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); + (##) TIM pins configuration + (+++) Enable the clock for the TIM GPIOs using the following function: + __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); + + (#) The external Clock can be configured, if needed (the default clock is the + internal clock from the APBx), using the following function: + HAL_TIM_ConfigClockSource, the clock configuration should be done before + any start function. + + (#) Configure the TIM in the desired functioning mode using one of the + initialization function of this driver: + (++) HAL_TIMEx_HallSensor_Init() and HAL_TIMEx_ConfigCommutEvent(): to use the + Timer Hall Sensor Interface and the commutation event with the corresponding + Interrupt and DMA request if needed (Note that One Timer is used to interface + with the Hall sensor Interface and another Timer should be used to use + the commutation event). + + (#) Activate the TIM peripheral using one of the start functions: + (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), + HAL_TIMEx_OCN_Start_IT() + (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), + HAL_TIMEx_PWMN_Start_IT() + (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT() + (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), + HAL_TIMEx_HallSensor_Start_IT(). + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup TIMEx TIMEx + * @brief TIM Extended HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma); +static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState); + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Functions TIM Extended Exported Functions + * @{ + */ + +/** @defgroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions + * @brief Timer Hall Sensor functions + * +@verbatim + ============================================================================== + ##### Timer Hall Sensor functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure TIM HAL Sensor. + (+) De-initialize TIM HAL Sensor. + (+) Start the Hall Sensor Interface. + (+) Stop the Hall Sensor Interface. + (+) Start the Hall Sensor Interface and enable interrupts. + (+) Stop the Hall Sensor Interface and disable interrupts. + (+) Start the Hall Sensor Interface and enable DMA transfers. + (+) Stop the Hall Sensor Interface and disable DMA transfers. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Hall Sensor Interface and initialize the associated handle. + * @note When the timer instance is initialized in Hall Sensor Interface mode, + * timer channels 1 and channel 2 are reserved and cannot be used for + * other purpose. + * @param htim TIM Hall Sensor Interface handle + * @param sConfig TIM Hall Sensor configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig) +{ + TIM_OC_InitTypeDef OC_Config; + + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy week callbacks */ + TIM_ResetCallback(htim); + + if (htim->HallSensor_MspInitCallback == NULL) + { + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->HallSensor_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIMEx_HallSensor_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Configure the Time base in the Encoder Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the Hall sensor */ + TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + /* Set the IC1PSC value */ + htim->Instance->CCMR1 |= sConfig->IC1Prescaler; + + /* Enable the Hall sensor interface (XOR function of the three inputs) */ + htim->Instance->CR2 |= TIM_CR2_TI1S; + + /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1F_ED; + + /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_RESET; + + /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/ + OC_Config.OCFastMode = TIM_OCFAST_DISABLE; + OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET; + OC_Config.OCMode = TIM_OCMODE_PWM2; + OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET; + OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH; + OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH; + OC_Config.Pulse = sConfig->Commutation_Delay; + + TIM_OC2_SetConfig(htim->Instance, &OC_Config); + + /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2 + register to 101 */ + htim->Instance->CR2 &= ~TIM_CR2_MMS; + htim->Instance->CR2 |= TIM_TRGO_OC2REF; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM Hall Sensor interface + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->HallSensor_MspDeInitCallback == NULL) + { + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; + } + /* DeInit the low level hardware */ + htim->HallSensor_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIMEx_HallSensor_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Hall Sensor MSP. + * @param htim TIM Hall Sensor Interface handle + * @retval None + */ +__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Hall Sensor MSP. + * @param htim TIM Hall Sensor Interface handle + * @retval None + */ +__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Hall Sensor Interface. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall sensor Interface. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1, 2 and 3 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Hall Sensor Interface in interrupt mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the capture compare Interrupts 1 event */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall Sensor Interface in interrupt mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts event */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Hall Sensor Interface in DMA mode. + * @param htim TIM Hall Sensor Interface handle + * @param pData The destination Buffer address. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel state */ + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Set the DMA Input Capture 1 Callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream for Capture 1*/ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the capture compare 1 Interrupt */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall Sensor Interface in DMA mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + + /* Disable the capture compare Interrupts 1 event */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions + * @brief Timer Complementary Output Compare functions + * +@verbatim + ============================================================================== + ##### Timer Complementary Output Compare functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary Output Compare/PWM. + (+) Stop the Complementary Output Compare/PWM. + (+) Start the Complementary Output Compare/PWM and enable interrupts. + (+) Stop the Complementary Output Compare/PWM and disable interrupts. + (+) Start the Complementary Output Compare/PWM and enable DMA transfers. + (+) Stop the Complementary Output Compare/PWM and disable DMA transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the TIM Output Compare signal generation on the complementary + * output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation on the complementary + * output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in interrupt mode + * on the complementary output. + * @param htim TIM OC handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in interrupt mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM Output Compare signal generation in DMA mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in DMA mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions + * @brief Timer Complementary PWM functions + * +@verbatim + ============================================================================== + ##### Timer Complementary PWM functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary PWM. + (+) Stop the Complementary PWM. + (+) Start the Complementary PWM and enable interrupts. + (+) Stop the Complementary PWM and disable interrupts. + (+) Start the Complementary PWM and enable DMA transfers. + (+) Stop the Complementary PWM and disable DMA transfers. + (+) Start the Complementary Input Capture measurement. + (+) Stop the Complementary Input Capture. + (+) Start the Complementary Input Capture and enable interrupts. + (+) Stop the Complementary Input Capture and disable interrupts. + (+) Start the Complementary Input Capture and enable DMA transfers. + (+) Stop the Complementary Input Capture and disable DMA transfers. + (+) Start the Complementary One Pulse generation. + (+) Stop the Complementary One Pulse. + (+) Start the Complementary One Pulse and enable interrupts. + (+) Stop the Complementary One Pulse and disable interrupts. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the PWM signal generation on the complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation on the complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the PWM signal generation in interrupt mode on the + * complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the PWM signal generation in interrupt mode on the + * complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM PWM signal generation in DMA mode on the + * complementary output + * @param htim TIM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM PWM signal generation in DMA mode on the complementary + * output + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions + * @brief Timer Complementary One Pulse functions + * +@verbatim + ============================================================================== + ##### Timer Complementary One Pulse functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary One Pulse generation. + (+) Stop the Complementary One Pulse. + (+) Start the Complementary One Pulse and enable interrupts. + (+) Stop the Complementary One Pulse and disable interrupts. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the TIM One Pulse signal generation on the complementary + * output. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to enable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation on the complementary + * output. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to disable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Disable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM One Pulse signal generation in interrupt mode on the + * complementary channel. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to enable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + + /* Enable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation in interrupt mode on the + * complementary channel. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to disable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + + /* Disable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Configure the commutation event in case of use of the Hall sensor interface. + (+) Configure Output channels for OC and PWM mode. + + (+) Configure Complementary channels, break features and dead time. + (+) Configure Master synchronization. + (+) Configure timer remapping capabilities. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the TIM commutation event sequence. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Disable Commutation Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); + + /* Disable Commutation DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configure the TIM commutation event sequence with interrupt. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Disable Commutation DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); + + /* Enable the Commutation Interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configure the TIM commutation event sequence with DMA. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @note The user should configure the DMA in his own software, in This function only the COMDE bit is set + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Enable the Commutation DMA Request */ + /* Set the DMA Commutation Callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError; + + /* Disable Commutation Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); + + /* Enable the Commutation DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM in master mode. + * @param htim TIM handle. + * @param sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that + * contains the selected trigger output (TRGO) and the Master/Slave + * mode. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, + TIM_MasterConfigTypeDef *sMasterConfig) +{ + uint32_t tmpcr2; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger)); + assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode)); + + /* Check input state */ + __HAL_LOCK(htim); + + /* Change the handler state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Get the TIMx CR2 register value */ + tmpcr2 = htim->Instance->CR2; + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Reset the MMS Bits */ + tmpcr2 &= ~TIM_CR2_MMS; + /* Select the TRGO source */ + tmpcr2 |= sMasterConfig->MasterOutputTrigger; + + /* Update TIMx CR2 */ + htim->Instance->CR2 = tmpcr2; + + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + /* Reset the MSM Bit */ + tmpsmcr &= ~TIM_SMCR_MSM; + /* Set master mode */ + tmpsmcr |= sMasterConfig->MasterSlaveMode; + + /* Update TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + } + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State + * and the AOE(automatic output enable). + * @param htim TIM handle + * @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that + * contains the BDTR Register configuration information for the TIM peripheral. + * @note Interrupts can be generated when an active level is detected on the + * break input, the break 2 input or the system break input. Break + * interrupt can be enabled by calling the @ref __HAL_TIM_ENABLE_IT macro. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, + TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig) +{ + /* Keep this variable initialized to 0 as it is used to configure BDTR register */ + uint32_t tmpbdtr = 0U; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode)); + assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode)); + assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel)); + assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime)); + assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState)); + assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity)); + assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput)); + + /* Check input state */ + __HAL_LOCK(htim); + + /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State, + the OSSI State, the dead time value and the Automatic Output Enable Bit */ + + /* Set the BDTR bits */ + MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, sBreakDeadTimeConfig->DeadTime); + MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, sBreakDeadTimeConfig->LockLevel); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, sBreakDeadTimeConfig->OffStateIDLEMode); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, sBreakDeadTimeConfig->OffStateRunMode); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, sBreakDeadTimeConfig->BreakState); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, sBreakDeadTimeConfig->BreakPolarity); + MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, sBreakDeadTimeConfig->AutomaticOutput); + + + /* Set TIMx_BDTR */ + htim->Instance->BDTR = tmpbdtr; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIMx Remapping input capabilities. + * @param htim TIM handle. + * @param Remap specifies the TIM remapping source. + * For TIM1, the parameter can have the following values: (**) + * @arg TIM_TIM1_TIM3_TRGO: TIM1 ITR2 is connected to TIM3 TRGO + * @arg TIM_TIM1_LPTIM: TIM1 ITR2 is connected to LPTIM1 output + * + * For TIM2, the parameter can have the following values: (**) + * @arg TIM_TIM2_TIM8_TRGO: TIM2 ITR1 is connected to TIM8 TRGO (*) + * @arg TIM_TIM2_ETH_PTP: TIM2 ITR1 is connected to PTP trigger output (*) + * @arg TIM_TIM2_USBFS_SOF: TIM2 ITR1 is connected to OTG FS SOF + * @arg TIM_TIM2_USBHS_SOF: TIM2 ITR1 is connected to OTG FS SOF + * + * For TIM5, the parameter can have the following values: + * @arg TIM_TIM5_GPIO: TIM5 TI4 is connected to GPIO + * @arg TIM_TIM5_LSI: TIM5 TI4 is connected to LSI + * @arg TIM_TIM5_LSE: TIM5 TI4 is connected to LSE + * @arg TIM_TIM5_RTC: TIM5 TI4 is connected to the RTC wakeup interrupt + * @arg TIM_TIM5_TIM3_TRGO: TIM5 ITR1 is connected to TIM3 TRGO (*) + * @arg TIM_TIM5_LPTIM: TIM5 ITR1 is connected to LPTIM1 output (*) + * + * For TIM9, the parameter can have the following values: (**) + * @arg TIM_TIM9_TIM3_TRGO: TIM9 ITR1 is connected to TIM3 TRGO + * @arg TIM_TIM9_LPTIM: TIM9 ITR1 is connected to LPTIM1 output + * + * For TIM11, the parameter can have the following values: + * @arg TIM_TIM11_GPIO: TIM11 TI1 is connected to GPIO + * @arg TIM_TIM11_HSE: TIM11 TI1 is connected to HSE_RTC clock + * @arg TIM_TIM11_SPDIFRX: TIM11 TI1 is connected to SPDIFRX_FRAME_SYNC (*) + * + * (*) Value not defined in all devices. \n + * (**) Register not available in all devices. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap) +{ + + /* Check parameters */ + assert_param(IS_TIM_REMAP(htim->Instance, Remap)); + + __HAL_LOCK(htim); + +#if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM9_ITR1_RMP) + if ((Remap & LPTIM_REMAP_MASK) == LPTIM_REMAP_MASK) + { + /* Connect TIMx internal trigger to LPTIM1 output */ + __HAL_RCC_LPTIM1_CLK_ENABLE(); + MODIFY_REG(LPTIM1->OR, + (LPTIM_OR_TIM1_ITR2_RMP | LPTIM_OR_TIM5_ITR1_RMP | LPTIM_OR_TIM9_ITR1_RMP), + Remap & ~(LPTIM_REMAP_MASK)); + } + else + { + /* Set the Timer remapping configuration */ + WRITE_REG(htim->Instance->OR, Remap); + } +#else + /* Set the Timer remapping configuration */ + WRITE_REG(htim->Instance->OR, Remap); +#endif /* LPTIM_OR_TIM1_ITR2_RMP && LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM9_ITR1_RMP */ + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions + * @brief Extended Callbacks functions + * +@verbatim + ============================================================================== + ##### Extended Callbacks functions ##### + ============================================================================== + [..] + This section provides Extended TIM callback functions: + (+) Timer Commutation callback + (+) Timer Break callback + +@endverbatim + * @{ + */ + +/** + * @brief Hall commutation changed callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_CommutCallback could be implemented in the user file + */ +} +/** + * @brief Hall commutation changed half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_CommutHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Break detection callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_BreakCallback could be implemented in the user file + */ +} +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions + * @brief Extended Peripheral State functions + * +@verbatim + ============================================================================== + ##### Extended Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the TIM Hall Sensor interface handle state. + * @param htim TIM Hall Sensor handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return actual state of the TIM complementary channel. + * @param htim TIM handle + * @param ChannelN TIM Complementary channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @retval TIM Complementary channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, ChannelN)); + + channel_state = TIM_CHANNEL_N_STATE_GET(htim, ChannelN); + + return channel_state; +} +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Functions TIM Extended Private Functions + * @{ + */ + +/** + * @brief TIM DMA Commutation callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationCallback(htim); +#else + HAL_TIMEx_CommutCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Commutation half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationHalfCpltCallback(htim); +#else + HAL_TIMEx_CommutHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + + +/** + * @brief TIM DMA Delay Pulse complete callback (complementary channel). + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA error callback (complementary channel) + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->ErrorCallback(htim); +#else + HAL_TIM_ErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel xN. + * @param TIMx to select the TIM peripheral + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @param ChannelNState specifies the TIM Channel CCxNE bit new state. + * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable. + * @retval None + */ +static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState) +{ + uint32_t tmp; + + tmp = TIM_CCER_CC1NE << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ + + /* Reset the CCxNE Bit */ + TIMx->CCER &= ~tmp; + + /* Set or reset the CCxNE Bit */ + TIMx->CCER |= (uint32_t)(ChannelNState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ +} +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Drivers/stm32f4xx_hal_tim_ex.h b/libs/hal/stm32f4xx_hal_tim_ex.h similarity index 97% rename from Drivers/stm32f4xx_hal_tim_ex.h rename to libs/hal/stm32f4xx_hal_tim_ex.h index a43611b..39fb500 100644 --- a/Drivers/stm32f4xx_hal_tim_ex.h +++ b/libs/hal/stm32f4xx_hal_tim_ex.h @@ -1,354 +1,354 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_tim_ex.h - * @author MCD Application Team - * @brief Header file of TIM HAL Extended module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_HAL_TIM_EX_H -#define STM32F4xx_HAL_TIM_EX_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup TIMEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types - * @{ - */ - -/** - * @brief TIM Hall sensor Configuration Structure definition - */ - -typedef struct -{ - uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ - - uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ - - uint32_t IC1Filter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ - - uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ -} TIM_HallSensor_InitTypeDef; -/** - * @} - */ -/* End of exported types -----------------------------------------------------*/ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants - * @{ - */ - -/** @defgroup TIMEx_Remap TIM Extended Remapping - * @{ - */ -#if defined (TIM2) -#if defined(TIM8) -#define TIM_TIM2_TIM8_TRGO 0x00000000U /*!< TIM2 ITR1 is connected to TIM8 TRGO */ -#else -#define TIM_TIM2_ETH_PTP TIM_OR_ITR1_RMP_0 /*!< TIM2 ITR1 is connected to PTP trigger output */ -#endif /* TIM8 */ -#define TIM_TIM2_USBFS_SOF TIM_OR_ITR1_RMP_1 /*!< TIM2 ITR1 is connected to OTG FS SOF */ -#define TIM_TIM2_USBHS_SOF (TIM_OR_ITR1_RMP_1 | TIM_OR_ITR1_RMP_0) /*!< TIM2 ITR1 is connected to OTG HS SOF */ -#endif /* TIM2 */ - -#define TIM_TIM5_GPIO 0x00000000U /*!< TIM5 TI4 is connected to GPIO */ -#define TIM_TIM5_LSI TIM_OR_TI4_RMP_0 /*!< TIM5 TI4 is connected to LSI */ -#define TIM_TIM5_LSE TIM_OR_TI4_RMP_1 /*!< TIM5 TI4 is connected to LSE */ -#define TIM_TIM5_RTC (TIM_OR_TI4_RMP_1 | TIM_OR_TI4_RMP_0) /*!< TIM5 TI4 is connected to the RTC wakeup interrupt */ - -#define TIM_TIM11_GPIO 0x00000000U /*!< TIM11 TI1 is connected to GPIO */ -#define TIM_TIM11_HSE TIM_OR_TI1_RMP_1 /*!< TIM11 TI1 is connected to HSE_RTC clock */ -#if defined(SPDIFRX) -#define TIM_TIM11_SPDIFRX TIM_OR_TI1_RMP_0 /*!< TIM11 TI1 is connected to SPDIFRX_FRAME_SYNC */ -#endif /* SPDIFRX*/ - -#if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) -#define LPTIM_REMAP_MASK 0x10000000U - -#define TIM_TIM9_TIM3_TRGO LPTIM_REMAP_MASK /*!< TIM9 ITR1 is connected to TIM3 TRGO */ -#define TIM_TIM9_LPTIM (LPTIM_REMAP_MASK | LPTIM_OR_TIM9_ITR1_RMP) /*!< TIM9 ITR1 is connected to LPTIM1 output */ - -#define TIM_TIM5_TIM3_TRGO LPTIM_REMAP_MASK /*!< TIM5 ITR1 is connected to TIM3 TRGO */ -#define TIM_TIM5_LPTIM (LPTIM_REMAP_MASK | LPTIM_OR_TIM5_ITR1_RMP) /*!< TIM5 ITR1 is connected to LPTIM1 output */ - -#define TIM_TIM1_TIM3_TRGO LPTIM_REMAP_MASK /*!< TIM1 ITR2 is connected to TIM3 TRGO */ -#define TIM_TIM1_LPTIM (LPTIM_REMAP_MASK | LPTIM_OR_TIM1_ITR2_RMP) /*!< TIM1 ITR2 is connected to LPTIM1 output */ -#endif /* LPTIM_OR_TIM1_ITR2_RMP && LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM5_ITR1_RMP */ -/** - * @} - */ - -/** - * @} - */ -/* End of exported constants -------------------------------------------------*/ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros - * @{ - */ - -/** - * @} - */ -/* End of exported macro -----------------------------------------------------*/ - -/* Private macro -------------------------------------------------------------*/ -/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros - * @{ - */ -#if defined(SPDIFRX) -#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ - ((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO) || \ - ((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \ - ((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \ - (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ - ((TIM_REMAP) == TIM_TIM5_LSI) || \ - ((TIM_REMAP) == TIM_TIM5_LSE) || \ - ((TIM_REMAP) == TIM_TIM5_RTC))) || \ - (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ - ((TIM_REMAP) == TIM_TIM11_SPDIFRX) || \ - ((TIM_REMAP) == TIM_TIM11_HSE)))) -#elif defined(TIM2) -#if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) -#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ - ((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO) || \ - ((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \ - ((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \ - (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ - ((TIM_REMAP) == TIM_TIM5_LSI) || \ - ((TIM_REMAP) == TIM_TIM5_LSE) || \ - ((TIM_REMAP) == TIM_TIM5_RTC))) || \ - (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ - ((TIM_REMAP) == TIM_TIM11_HSE))) || \ - (((INSTANCE) == TIM1) && (((TIM_REMAP) == TIM_TIM1_TIM3_TRGO) || \ - ((TIM_REMAP) == TIM_TIM1_LPTIM))) || \ - (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_TIM3_TRGO) || \ - ((TIM_REMAP) == TIM_TIM5_LPTIM))) || \ - (((INSTANCE) == TIM9) && (((TIM_REMAP) == TIM_TIM9_TIM3_TRGO) || \ - ((TIM_REMAP) == TIM_TIM9_LPTIM)))) -#elif defined(TIM8) -#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ - ((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO) || \ - ((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \ - ((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \ - (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ - ((TIM_REMAP) == TIM_TIM5_LSI) || \ - ((TIM_REMAP) == TIM_TIM5_LSE) || \ - ((TIM_REMAP) == TIM_TIM5_RTC))) || \ - (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ - ((TIM_REMAP) == TIM_TIM11_HSE)))) -#else -#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ - ((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_ETH_PTP) || \ - ((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \ - ((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \ - (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ - ((TIM_REMAP) == TIM_TIM5_LSI) || \ - ((TIM_REMAP) == TIM_TIM5_LSE) || \ - ((TIM_REMAP) == TIM_TIM5_RTC))) || \ - (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ - ((TIM_REMAP) == TIM_TIM11_HSE)))) -#endif /* LPTIM_OR_TIM1_ITR2_RMP && LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM5_ITR1_RMP */ -#else -#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ - ((((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ - ((TIM_REMAP) == TIM_TIM5_LSI) || \ - ((TIM_REMAP) == TIM_TIM5_LSE) || \ - ((TIM_REMAP) == TIM_TIM5_RTC))) || \ - (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ - ((TIM_REMAP) == TIM_TIM11_HSE)))) -#endif /* SPDIFRX */ - -/** - * @} - */ -/* End of private macro ------------------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions - * @{ - */ - -/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions - * @brief Timer Hall Sensor functions - * @{ - */ -/* Timer Hall Sensor functions **********************************************/ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig); -HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim); - -void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim); - -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions - * @brief Timer Complementary Output Compare functions - * @{ - */ -/* Timer Complementary Output Compare functions *****************************/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); - -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); - -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions - * @brief Timer Complementary PWM functions - * @{ - */ -/* Timer Complementary PWM functions ****************************************/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); - -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions - * @brief Timer Complementary One Pulse functions - * @{ - */ -/* Timer Complementary One Pulse functions **********************************/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); - -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions - * @brief Peripheral Control functions - * @{ - */ -/* Extended Control functions ************************************************/ -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, - uint32_t CommutationSource); -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, - uint32_t CommutationSource); -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, - uint32_t CommutationSource); -HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, - TIM_MasterConfigTypeDef *sMasterConfig); -HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, - TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig); -HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions - * @brief Extended Callbacks functions - * @{ - */ -/* Extended Callback **********************************************************/ -void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim); -void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim); -void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions - * @brief Extended Peripheral State functions - * @{ - */ -/* Extended Peripheral State functions ***************************************/ -HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN); -/** - * @} - */ - -/** - * @} - */ -/* End of exported functions -------------------------------------------------*/ - -/* Private functions----------------------------------------------------------*/ -/** @addtogroup TIMEx_Private_Functions TIM Extended Private Functions - * @{ - */ -void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma); -void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma); -/** - * @} - */ -/* End of private functions --------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* STM32F4xx_HAL_TIM_EX_H */ +/** + ****************************************************************************** + * @file stm32f4xx_hal_tim_ex.h + * @author MCD Application Team + * @brief Header file of TIM HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F4xx_HAL_TIM_EX_H +#define STM32F4xx_HAL_TIM_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup TIMEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types + * @{ + */ + +/** + * @brief TIM Hall sensor Configuration Structure definition + */ + +typedef struct +{ + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ +} TIM_HallSensor_InitTypeDef; +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants + * @{ + */ + +/** @defgroup TIMEx_Remap TIM Extended Remapping + * @{ + */ +#if defined (TIM2) +#if defined(TIM8) +#define TIM_TIM2_TIM8_TRGO 0x00000000U /*!< TIM2 ITR1 is connected to TIM8 TRGO */ +#else +#define TIM_TIM2_ETH_PTP TIM_OR_ITR1_RMP_0 /*!< TIM2 ITR1 is connected to PTP trigger output */ +#endif /* TIM8 */ +#define TIM_TIM2_USBFS_SOF TIM_OR_ITR1_RMP_1 /*!< TIM2 ITR1 is connected to OTG FS SOF */ +#define TIM_TIM2_USBHS_SOF (TIM_OR_ITR1_RMP_1 | TIM_OR_ITR1_RMP_0) /*!< TIM2 ITR1 is connected to OTG HS SOF */ +#endif /* TIM2 */ + +#define TIM_TIM5_GPIO 0x00000000U /*!< TIM5 TI4 is connected to GPIO */ +#define TIM_TIM5_LSI TIM_OR_TI4_RMP_0 /*!< TIM5 TI4 is connected to LSI */ +#define TIM_TIM5_LSE TIM_OR_TI4_RMP_1 /*!< TIM5 TI4 is connected to LSE */ +#define TIM_TIM5_RTC (TIM_OR_TI4_RMP_1 | TIM_OR_TI4_RMP_0) /*!< TIM5 TI4 is connected to the RTC wakeup interrupt */ + +#define TIM_TIM11_GPIO 0x00000000U /*!< TIM11 TI1 is connected to GPIO */ +#define TIM_TIM11_HSE TIM_OR_TI1_RMP_1 /*!< TIM11 TI1 is connected to HSE_RTC clock */ +#if defined(SPDIFRX) +#define TIM_TIM11_SPDIFRX TIM_OR_TI1_RMP_0 /*!< TIM11 TI1 is connected to SPDIFRX_FRAME_SYNC */ +#endif /* SPDIFRX*/ + +#if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) +#define LPTIM_REMAP_MASK 0x10000000U + +#define TIM_TIM9_TIM3_TRGO LPTIM_REMAP_MASK /*!< TIM9 ITR1 is connected to TIM3 TRGO */ +#define TIM_TIM9_LPTIM (LPTIM_REMAP_MASK | LPTIM_OR_TIM9_ITR1_RMP) /*!< TIM9 ITR1 is connected to LPTIM1 output */ + +#define TIM_TIM5_TIM3_TRGO LPTIM_REMAP_MASK /*!< TIM5 ITR1 is connected to TIM3 TRGO */ +#define TIM_TIM5_LPTIM (LPTIM_REMAP_MASK | LPTIM_OR_TIM5_ITR1_RMP) /*!< TIM5 ITR1 is connected to LPTIM1 output */ + +#define TIM_TIM1_TIM3_TRGO LPTIM_REMAP_MASK /*!< TIM1 ITR2 is connected to TIM3 TRGO */ +#define TIM_TIM1_LPTIM (LPTIM_REMAP_MASK | LPTIM_OR_TIM1_ITR2_RMP) /*!< TIM1 ITR2 is connected to LPTIM1 output */ +#endif /* LPTIM_OR_TIM1_ITR2_RMP && LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM5_ITR1_RMP */ +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros + * @{ + */ + +/** + * @} + */ +/* End of exported macro -----------------------------------------------------*/ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros + * @{ + */ +#if defined(SPDIFRX) +#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ + ((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO) || \ + ((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \ + ((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \ + (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ + ((TIM_REMAP) == TIM_TIM5_LSI) || \ + ((TIM_REMAP) == TIM_TIM5_LSE) || \ + ((TIM_REMAP) == TIM_TIM5_RTC))) || \ + (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ + ((TIM_REMAP) == TIM_TIM11_SPDIFRX) || \ + ((TIM_REMAP) == TIM_TIM11_HSE)))) +#elif defined(TIM2) +#if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) +#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ + ((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO) || \ + ((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \ + ((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \ + (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ + ((TIM_REMAP) == TIM_TIM5_LSI) || \ + ((TIM_REMAP) == TIM_TIM5_LSE) || \ + ((TIM_REMAP) == TIM_TIM5_RTC))) || \ + (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ + ((TIM_REMAP) == TIM_TIM11_HSE))) || \ + (((INSTANCE) == TIM1) && (((TIM_REMAP) == TIM_TIM1_TIM3_TRGO) || \ + ((TIM_REMAP) == TIM_TIM1_LPTIM))) || \ + (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_TIM3_TRGO) || \ + ((TIM_REMAP) == TIM_TIM5_LPTIM))) || \ + (((INSTANCE) == TIM9) && (((TIM_REMAP) == TIM_TIM9_TIM3_TRGO) || \ + ((TIM_REMAP) == TIM_TIM9_LPTIM)))) +#elif defined(TIM8) +#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ + ((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO) || \ + ((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \ + ((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \ + (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ + ((TIM_REMAP) == TIM_TIM5_LSI) || \ + ((TIM_REMAP) == TIM_TIM5_LSE) || \ + ((TIM_REMAP) == TIM_TIM5_RTC))) || \ + (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ + ((TIM_REMAP) == TIM_TIM11_HSE)))) +#else +#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ + ((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_ETH_PTP) || \ + ((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \ + ((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \ + (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ + ((TIM_REMAP) == TIM_TIM5_LSI) || \ + ((TIM_REMAP) == TIM_TIM5_LSE) || \ + ((TIM_REMAP) == TIM_TIM5_RTC))) || \ + (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ + ((TIM_REMAP) == TIM_TIM11_HSE)))) +#endif /* LPTIM_OR_TIM1_ITR2_RMP && LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM5_ITR1_RMP */ +#else +#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ + ((((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ + ((TIM_REMAP) == TIM_TIM5_LSI) || \ + ((TIM_REMAP) == TIM_TIM5_LSE) || \ + ((TIM_REMAP) == TIM_TIM5_RTC))) || \ + (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ + ((TIM_REMAP) == TIM_TIM11_HSE)))) +#endif /* SPDIFRX */ + +/** + * @} + */ +/* End of private macro ------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions + * @{ + */ + +/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions + * @brief Timer Hall Sensor functions + * @{ + */ +/* Timer Hall Sensor functions **********************************************/ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim); + +void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim); + +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions + * @brief Timer Complementary Output Compare functions + * @{ + */ +/* Timer Complementary Output Compare functions *****************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions + * @brief Timer Complementary PWM functions + * @{ + */ +/* Timer Complementary PWM functions ****************************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions + * @brief Timer Complementary One Pulse functions + * @{ + */ +/* Timer Complementary One Pulse functions **********************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Extended Control functions ************************************************/ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, + TIM_MasterConfigTypeDef *sMasterConfig); +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, + TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig); +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions + * @brief Extended Callbacks functions + * @{ + */ +/* Extended Callback **********************************************************/ +void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions + * @brief Extended Peripheral State functions + * @{ + */ +/* Extended Peripheral State functions ***************************************/ +HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private functions----------------------------------------------------------*/ +/** @addtogroup TIMEx_Private_Functions TIM Extended Private Functions + * @{ + */ +void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma); +void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma); +/** + * @} + */ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32F4xx_HAL_TIM_EX_H */ diff --git a/Drivers/stm32f4xx_ll_bus.h b/libs/hal/stm32f4xx_ll_bus.h similarity index 97% rename from Drivers/stm32f4xx_ll_bus.h rename to libs/hal/stm32f4xx_ll_bus.h index 460edfc..5083c10 100644 --- a/Drivers/stm32f4xx_ll_bus.h +++ b/libs/hal/stm32f4xx_ll_bus.h @@ -1,2105 +1,2105 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_bus.h - * @author MCD Application Team - * @brief Header file of BUS LL module. - - @verbatim - ##### RCC Limitations ##### - ============================================================================== - [..] - A delay between an RCC peripheral clock enable and the effective peripheral - enabling should be taken into account in order to manage the peripheral read/write - from/to registers. - (+) This delay depends on the peripheral mapping. - (++) AHB & APB peripherals, 1 dummy read is necessary - - [..] - Workarounds: - (#) For AHB & APB peripherals, a dummy read to the peripheral register has been - inserted in each LL_{BUS}_GRP{x}_EnableClock() function. - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_BUS_H -#define __STM32F4xx_LL_BUS_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined(RCC) - -/** @defgroup BUS_LL BUS - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants - * @{ - */ - -/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH - * @{ - */ -#define LL_AHB1_GRP1_PERIPH_ALL 0xFFFFFFFFU -#define LL_AHB1_GRP1_PERIPH_GPIOA RCC_AHB1ENR_GPIOAEN -#define LL_AHB1_GRP1_PERIPH_GPIOB RCC_AHB1ENR_GPIOBEN -#define LL_AHB1_GRP1_PERIPH_GPIOC RCC_AHB1ENR_GPIOCEN -#if defined(GPIOD) -#define LL_AHB1_GRP1_PERIPH_GPIOD RCC_AHB1ENR_GPIODEN -#endif /* GPIOD */ -#if defined(GPIOE) -#define LL_AHB1_GRP1_PERIPH_GPIOE RCC_AHB1ENR_GPIOEEN -#endif /* GPIOE */ -#if defined(GPIOF) -#define LL_AHB1_GRP1_PERIPH_GPIOF RCC_AHB1ENR_GPIOFEN -#endif /* GPIOF */ -#if defined(GPIOG) -#define LL_AHB1_GRP1_PERIPH_GPIOG RCC_AHB1ENR_GPIOGEN -#endif /* GPIOG */ -#if defined(GPIOH) -#define LL_AHB1_GRP1_PERIPH_GPIOH RCC_AHB1ENR_GPIOHEN -#endif /* GPIOH */ -#if defined(GPIOI) -#define LL_AHB1_GRP1_PERIPH_GPIOI RCC_AHB1ENR_GPIOIEN -#endif /* GPIOI */ -#if defined(GPIOJ) -#define LL_AHB1_GRP1_PERIPH_GPIOJ RCC_AHB1ENR_GPIOJEN -#endif /* GPIOJ */ -#if defined(GPIOK) -#define LL_AHB1_GRP1_PERIPH_GPIOK RCC_AHB1ENR_GPIOKEN -#endif /* GPIOK */ -#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHB1ENR_CRCEN -#if defined(RCC_AHB1ENR_BKPSRAMEN) -#define LL_AHB1_GRP1_PERIPH_BKPSRAM RCC_AHB1ENR_BKPSRAMEN -#endif /* RCC_AHB1ENR_BKPSRAMEN */ -#if defined(RCC_AHB1ENR_CCMDATARAMEN) -#define LL_AHB1_GRP1_PERIPH_CCMDATARAM RCC_AHB1ENR_CCMDATARAMEN -#endif /* RCC_AHB1ENR_CCMDATARAMEN */ -#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHB1ENR_DMA1EN -#define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHB1ENR_DMA2EN -#if defined(RCC_AHB1ENR_RNGEN) -#define LL_AHB1_GRP1_PERIPH_RNG RCC_AHB1ENR_RNGEN -#endif /* RCC_AHB1ENR_RNGEN */ -#if defined(DMA2D) -#define LL_AHB1_GRP1_PERIPH_DMA2D RCC_AHB1ENR_DMA2DEN -#endif /* DMA2D */ -#if defined(ETH) -#define LL_AHB1_GRP1_PERIPH_ETHMAC RCC_AHB1ENR_ETHMACEN -#define LL_AHB1_GRP1_PERIPH_ETHMACTX RCC_AHB1ENR_ETHMACTXEN -#define LL_AHB1_GRP1_PERIPH_ETHMACRX RCC_AHB1ENR_ETHMACRXEN -#define LL_AHB1_GRP1_PERIPH_ETHMACPTP RCC_AHB1ENR_ETHMACPTPEN -#endif /* ETH */ -#if defined(USB_OTG_HS) -#define LL_AHB1_GRP1_PERIPH_OTGHS RCC_AHB1ENR_OTGHSEN -#define LL_AHB1_GRP1_PERIPH_OTGHSULPI RCC_AHB1ENR_OTGHSULPIEN -#endif /* USB_OTG_HS */ -#define LL_AHB1_GRP1_PERIPH_FLITF RCC_AHB1LPENR_FLITFLPEN -#define LL_AHB1_GRP1_PERIPH_SRAM1 RCC_AHB1LPENR_SRAM1LPEN -#if defined(RCC_AHB1LPENR_SRAM2LPEN) -#define LL_AHB1_GRP1_PERIPH_SRAM2 RCC_AHB1LPENR_SRAM2LPEN -#endif /* RCC_AHB1LPENR_SRAM2LPEN */ -#if defined(RCC_AHB1LPENR_SRAM3LPEN) -#define LL_AHB1_GRP1_PERIPH_SRAM3 RCC_AHB1LPENR_SRAM3LPEN -#endif /* RCC_AHB1LPENR_SRAM3LPEN */ -/** - * @} - */ - -#if defined(RCC_AHB2_SUPPORT) -/** @defgroup BUS_LL_EC_AHB2_GRP1_PERIPH AHB2 GRP1 PERIPH - * @{ - */ -#define LL_AHB2_GRP1_PERIPH_ALL 0xFFFFFFFFU -#if defined(DCMI) -#define LL_AHB2_GRP1_PERIPH_DCMI RCC_AHB2ENR_DCMIEN -#endif /* DCMI */ -#if defined(CRYP) -#define LL_AHB2_GRP1_PERIPH_CRYP RCC_AHB2ENR_CRYPEN -#endif /* CRYP */ -#if defined(AES) -#define LL_AHB2_GRP1_PERIPH_AES RCC_AHB2ENR_AESEN -#endif /* AES */ -#if defined(HASH) -#define LL_AHB2_GRP1_PERIPH_HASH RCC_AHB2ENR_HASHEN -#endif /* HASH */ -#if defined(RCC_AHB2ENR_RNGEN) -#define LL_AHB2_GRP1_PERIPH_RNG RCC_AHB2ENR_RNGEN -#endif /* RCC_AHB2ENR_RNGEN */ -#if defined(USB_OTG_FS) -#define LL_AHB2_GRP1_PERIPH_OTGFS RCC_AHB2ENR_OTGFSEN -#endif /* USB_OTG_FS */ -/** - * @} - */ -#endif /* RCC_AHB2_SUPPORT */ - -#if defined(RCC_AHB3_SUPPORT) -/** @defgroup BUS_LL_EC_AHB3_GRP1_PERIPH AHB3 GRP1 PERIPH - * @{ - */ -#define LL_AHB3_GRP1_PERIPH_ALL 0xFFFFFFFFU -#if defined(FSMC_Bank1) -#define LL_AHB3_GRP1_PERIPH_FSMC RCC_AHB3ENR_FSMCEN -#endif /* FSMC_Bank1 */ -#if defined(FMC_Bank1) -#define LL_AHB3_GRP1_PERIPH_FMC RCC_AHB3ENR_FMCEN -#endif /* FMC_Bank1 */ -#if defined(QUADSPI) -#define LL_AHB3_GRP1_PERIPH_QSPI RCC_AHB3ENR_QSPIEN -#endif /* QUADSPI */ -/** - * @} - */ -#endif /* RCC_AHB3_SUPPORT */ - -/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH - * @{ - */ -#define LL_APB1_GRP1_PERIPH_ALL 0xFFFFFFFFU -#if defined(TIM2) -#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR_TIM2EN -#endif /* TIM2 */ -#if defined(TIM3) -#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1ENR_TIM3EN -#endif /* TIM3 */ -#if defined(TIM4) -#define LL_APB1_GRP1_PERIPH_TIM4 RCC_APB1ENR_TIM4EN -#endif /* TIM4 */ -#define LL_APB1_GRP1_PERIPH_TIM5 RCC_APB1ENR_TIM5EN -#if defined(TIM6) -#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1ENR_TIM6EN -#endif /* TIM6 */ -#if defined(TIM7) -#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1ENR_TIM7EN -#endif /* TIM7 */ -#if defined(TIM12) -#define LL_APB1_GRP1_PERIPH_TIM12 RCC_APB1ENR_TIM12EN -#endif /* TIM12 */ -#if defined(TIM13) -#define LL_APB1_GRP1_PERIPH_TIM13 RCC_APB1ENR_TIM13EN -#endif /* TIM13 */ -#if defined(TIM14) -#define LL_APB1_GRP1_PERIPH_TIM14 RCC_APB1ENR_TIM14EN -#endif /* TIM14 */ -#if defined(LPTIM1) -#define LL_APB1_GRP1_PERIPH_LPTIM1 RCC_APB1ENR_LPTIM1EN -#endif /* LPTIM1 */ -#if defined(RCC_APB1ENR_RTCAPBEN) -#define LL_APB1_GRP1_PERIPH_RTCAPB RCC_APB1ENR_RTCAPBEN -#endif /* RCC_APB1ENR_RTCAPBEN */ -#define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR_WWDGEN -#if defined(SPI2) -#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR_SPI2EN -#endif /* SPI2 */ -#if defined(SPI3) -#define LL_APB1_GRP1_PERIPH_SPI3 RCC_APB1ENR_SPI3EN -#endif /* SPI3 */ -#if defined(SPDIFRX) -#define LL_APB1_GRP1_PERIPH_SPDIFRX RCC_APB1ENR_SPDIFRXEN -#endif /* SPDIFRX */ -#define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1ENR_USART2EN -#if defined(USART3) -#define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1ENR_USART3EN -#endif /* USART3 */ -#if defined(UART4) -#define LL_APB1_GRP1_PERIPH_UART4 RCC_APB1ENR_UART4EN -#endif /* UART4 */ -#if defined(UART5) -#define LL_APB1_GRP1_PERIPH_UART5 RCC_APB1ENR_UART5EN -#endif /* UART5 */ -#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR_I2C1EN -#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR_I2C2EN -#if defined(I2C3) -#define LL_APB1_GRP1_PERIPH_I2C3 RCC_APB1ENR_I2C3EN -#endif /* I2C3 */ -#if defined(FMPI2C1) -#define LL_APB1_GRP1_PERIPH_FMPI2C1 RCC_APB1ENR_FMPI2C1EN -#endif /* FMPI2C1 */ -#if defined(CAN1) -#define LL_APB1_GRP1_PERIPH_CAN1 RCC_APB1ENR_CAN1EN -#endif /* CAN1 */ -#if defined(CAN2) -#define LL_APB1_GRP1_PERIPH_CAN2 RCC_APB1ENR_CAN2EN -#endif /* CAN2 */ -#if defined(CAN3) -#define LL_APB1_GRP1_PERIPH_CAN3 RCC_APB1ENR_CAN3EN -#endif /* CAN3 */ -#if defined(CEC) -#define LL_APB1_GRP1_PERIPH_CEC RCC_APB1ENR_CECEN -#endif /* CEC */ -#define LL_APB1_GRP1_PERIPH_PWR RCC_APB1ENR_PWREN -#if defined(DAC1) -#define LL_APB1_GRP1_PERIPH_DAC1 RCC_APB1ENR_DACEN -#endif /* DAC1 */ -#if defined(UART7) -#define LL_APB1_GRP1_PERIPH_UART7 RCC_APB1ENR_UART7EN -#endif /* UART7 */ -#if defined(UART8) -#define LL_APB1_GRP1_PERIPH_UART8 RCC_APB1ENR_UART8EN -#endif /* UART8 */ -/** - * @} - */ - -/** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH - * @{ - */ -#define LL_APB2_GRP1_PERIPH_ALL 0xFFFFFFFFU -#define LL_APB2_GRP1_PERIPH_TIM1 RCC_APB2ENR_TIM1EN -#if defined(TIM8) -#define LL_APB2_GRP1_PERIPH_TIM8 RCC_APB2ENR_TIM8EN -#endif /* TIM8 */ -#define LL_APB2_GRP1_PERIPH_USART1 RCC_APB2ENR_USART1EN -#if defined(USART6) -#define LL_APB2_GRP1_PERIPH_USART6 RCC_APB2ENR_USART6EN -#endif /* USART6 */ -#if defined(UART9) -#define LL_APB2_GRP1_PERIPH_UART9 RCC_APB2ENR_UART9EN -#endif /* UART9 */ -#if defined(UART10) -#define LL_APB2_GRP1_PERIPH_UART10 RCC_APB2ENR_UART10EN -#endif /* UART10 */ -#define LL_APB2_GRP1_PERIPH_ADC1 RCC_APB2ENR_ADC1EN -#if defined(ADC2) -#define LL_APB2_GRP1_PERIPH_ADC2 RCC_APB2ENR_ADC2EN -#endif /* ADC2 */ -#if defined(ADC3) -#define LL_APB2_GRP1_PERIPH_ADC3 RCC_APB2ENR_ADC3EN -#endif /* ADC3 */ -#if defined(SDIO) -#define LL_APB2_GRP1_PERIPH_SDIO RCC_APB2ENR_SDIOEN -#endif /* SDIO */ -#define LL_APB2_GRP1_PERIPH_SPI1 RCC_APB2ENR_SPI1EN -#if defined(SPI4) -#define LL_APB2_GRP1_PERIPH_SPI4 RCC_APB2ENR_SPI4EN -#endif /* SPI4 */ -#define LL_APB2_GRP1_PERIPH_SYSCFG RCC_APB2ENR_SYSCFGEN -#if defined(RCC_APB2ENR_EXTITEN) -#define LL_APB2_GRP1_PERIPH_EXTI RCC_APB2ENR_EXTITEN -#endif /* RCC_APB2ENR_EXTITEN */ -#define LL_APB2_GRP1_PERIPH_TIM9 RCC_APB2ENR_TIM9EN -#if defined(TIM10) -#define LL_APB2_GRP1_PERIPH_TIM10 RCC_APB2ENR_TIM10EN -#endif /* TIM10 */ -#define LL_APB2_GRP1_PERIPH_TIM11 RCC_APB2ENR_TIM11EN -#if defined(SPI5) -#define LL_APB2_GRP1_PERIPH_SPI5 RCC_APB2ENR_SPI5EN -#endif /* SPI5 */ -#if defined(SPI6) -#define LL_APB2_GRP1_PERIPH_SPI6 RCC_APB2ENR_SPI6EN -#endif /* SPI6 */ -#if defined(SAI1) -#define LL_APB2_GRP1_PERIPH_SAI1 RCC_APB2ENR_SAI1EN -#endif /* SAI1 */ -#if defined(SAI2) -#define LL_APB2_GRP1_PERIPH_SAI2 RCC_APB2ENR_SAI2EN -#endif /* SAI2 */ -#if defined(LTDC) -#define LL_APB2_GRP1_PERIPH_LTDC RCC_APB2ENR_LTDCEN -#endif /* LTDC */ -#if defined(DSI) -#define LL_APB2_GRP1_PERIPH_DSI RCC_APB2ENR_DSIEN -#endif /* DSI */ -#if defined(DFSDM1_Channel0) -#define LL_APB2_GRP1_PERIPH_DFSDM1 RCC_APB2ENR_DFSDM1EN -#endif /* DFSDM1_Channel0 */ -#if defined(DFSDM2_Channel0) -#define LL_APB2_GRP1_PERIPH_DFSDM2 RCC_APB2ENR_DFSDM2EN -#endif /* DFSDM2_Channel0 */ -#define LL_APB2_GRP1_PERIPH_ADC RCC_APB2RSTR_ADCRST -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions - * @{ - */ - -/** @defgroup BUS_LL_EF_AHB1 AHB1 - * @{ - */ - -/** - * @brief Enable AHB1 peripherals clock. - * @rmtoll AHB1ENR GPIOAEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIOBEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIOCEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIODEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIOEEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIOFEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIOGEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIOHEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIOIEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIOJEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR GPIOKEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR CRCEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR BKPSRAMEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR CCMDATARAMEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR DMA1EN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR DMA2EN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR RNGEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR DMA2DEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR ETHMACEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR ETHMACTXEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR ETHMACRXEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR ETHMACPTPEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR OTGHSEN LL_AHB1_GRP1_EnableClock\n - * AHB1ENR OTGHSULPIEN LL_AHB1_GRP1_EnableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CRC - * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CCMDATARAM (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 - * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->AHB1ENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->AHB1ENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Check if AHB1 peripheral clock is enabled or not - * @rmtoll AHB1ENR GPIOAEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIOBEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIOCEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIODEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIOEEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIOFEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIOGEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIOHEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIOIEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIOJEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR GPIOKEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR BKPSRAMEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR CCMDATARAMEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR RNGEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR DMA2DEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR ETHMACEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR ETHMACTXEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR ETHMACRXEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR ETHMACPTPEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR OTGHSEN LL_AHB1_GRP1_IsEnabledClock\n - * AHB1ENR OTGHSULPIEN LL_AHB1_GRP1_IsEnabledClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CRC - * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CCMDATARAM (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 - * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*) - * - * (*) value not defined in all devices. - * @retval State of Periphs (1 or 0). -*/ -__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) -{ - return (READ_BIT(RCC->AHB1ENR, Periphs) == Periphs); -} - -/** - * @brief Disable AHB1 peripherals clock. - * @rmtoll AHB1ENR GPIOAEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIOBEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIOCEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIODEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIOEEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIOFEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIOGEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIOHEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIOIEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIOJEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR GPIOKEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR CRCEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR BKPSRAMEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR CCMDATARAMEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR DMA1EN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR DMA2EN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR RNGEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR DMA2DEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR ETHMACEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR ETHMACTXEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR ETHMACRXEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR ETHMACPTPEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR OTGHSEN LL_AHB1_GRP1_DisableClock\n - * AHB1ENR OTGHSULPIEN LL_AHB1_GRP1_DisableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CRC - * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CCMDATARAM (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 - * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs) -{ - CLEAR_BIT(RCC->AHB1ENR, Periphs); -} - -/** - * @brief Force AHB1 peripherals reset. - * @rmtoll AHB1RSTR GPIOARST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIOBRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIOCRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIODRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIOERST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIOFRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIOGRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIOHRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIOIRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIOJRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR GPIOKRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR CRCRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR DMA1RST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR DMA2RST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR RNGRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR DMA2DRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR ETHMACRST LL_AHB1_GRP1_ForceReset\n - * AHB1RSTR OTGHSRST LL_AHB1_GRP1_ForceReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB1_GRP1_PERIPH_ALL - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CRC - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 - * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs) -{ - SET_BIT(RCC->AHB1RSTR, Periphs); -} - -/** - * @brief Release AHB1 peripherals reset. - * @rmtoll AHB1RSTR GPIOARST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIOBRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIOCRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIODRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIOERST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIOFRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIOGRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIOHRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIOIRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIOJRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR GPIOKRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR CRCRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR DMA1RST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR DMA2RST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR RNGRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR DMA2DRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR ETHMACRST LL_AHB1_GRP1_ReleaseReset\n - * AHB1RSTR OTGHSRST LL_AHB1_GRP1_ReleaseReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB1_GRP1_PERIPH_ALL - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CRC - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 - * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs) -{ - CLEAR_BIT(RCC->AHB1RSTR, Periphs); -} - -/** - * @brief Enable AHB1 peripheral clocks in low-power mode - * @rmtoll AHB1LPENR GPIOALPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIOBLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIOCLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIODLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIOELPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIOFLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIOGLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIOHLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIOILPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIOJLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR GPIOKLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR CRCLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR BKPSRAMLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR FLITFLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR SRAM1LPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR SRAM2LPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR SRAM3LPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR BKPSRAMLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR DMA1LPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR DMA2LPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR DMA2DLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR RNGLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR ETHMACLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR ETHMACTXLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR ETHMACRXLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR ETHMACPTPLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR OTGHSLPEN LL_AHB1_GRP1_EnableClockLowPower\n - * AHB1LPENR OTGHSULPILPEN LL_AHB1_GRP1_EnableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CRC - * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_FLITF - * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1 - * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM2 (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM3 (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 - * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB1_GRP1_EnableClockLowPower(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->AHB1LPENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->AHB1LPENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Disable AHB1 peripheral clocks in low-power mode - * @rmtoll AHB1LPENR GPIOALPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIOBLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIOCLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIODLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIOELPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIOFLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIOGLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIOHLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIOILPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIOJLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR GPIOKLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR CRCLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR BKPSRAMLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR FLITFLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR SRAM1LPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR SRAM2LPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR SRAM3LPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR BKPSRAMLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR DMA1LPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR DMA2LPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR DMA2DLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR RNGLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR ETHMACLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR ETHMACTXLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR ETHMACRXLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR ETHMACPTPLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR OTGHSLPEN LL_AHB1_GRP1_DisableClockLowPower\n - * AHB1LPENR OTGHSULPILPEN LL_AHB1_GRP1_DisableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_CRC - * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_FLITF - * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1 - * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM2 (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM3 (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 - * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) - * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB1_GRP1_DisableClockLowPower(uint32_t Periphs) -{ - CLEAR_BIT(RCC->AHB1LPENR, Periphs); -} - -/** - * @} - */ - -#if defined(RCC_AHB2_SUPPORT) -/** @defgroup BUS_LL_EF_AHB2 AHB2 - * @{ - */ - -/** - * @brief Enable AHB2 peripherals clock. - * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_EnableClock\n - * AHB2ENR CRYPEN LL_AHB2_GRP1_EnableClock\n - * AHB2ENR AESEN LL_AHB2_GRP1_EnableClock\n - * AHB2ENR HASHEN LL_AHB2_GRP1_EnableClock\n - * AHB2ENR RNGEN LL_AHB2_GRP1_EnableClock\n - * AHB2ENR OTGFSEN LL_AHB2_GRP1_EnableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB2_GRP1_EnableClock(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->AHB2ENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->AHB2ENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Check if AHB2 peripheral clock is enabled or not - * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_IsEnabledClock\n - * AHB2ENR CRYPEN LL_AHB2_GRP1_IsEnabledClock\n - * AHB2ENR AESEN LL_AHB2_GRP1_IsEnabledClock\n - * AHB2ENR HASHEN LL_AHB2_GRP1_IsEnabledClock\n - * AHB2ENR RNGEN LL_AHB2_GRP1_IsEnabledClock\n - * AHB2ENR OTGFSEN LL_AHB2_GRP1_IsEnabledClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) - * - * (*) value not defined in all devices. - * @retval State of Periphs (1 or 0). -*/ -__STATIC_INLINE uint32_t LL_AHB2_GRP1_IsEnabledClock(uint32_t Periphs) -{ - return (READ_BIT(RCC->AHB2ENR, Periphs) == Periphs); -} - -/** - * @brief Disable AHB2 peripherals clock. - * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_DisableClock\n - * AHB2ENR CRYPEN LL_AHB2_GRP1_DisableClock\n - * AHB2ENR AESEN LL_AHB2_GRP1_DisableClock\n - * AHB2ENR HASHEN LL_AHB2_GRP1_DisableClock\n - * AHB2ENR RNGEN LL_AHB2_GRP1_DisableClock\n - * AHB2ENR OTGFSEN LL_AHB2_GRP1_DisableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB2_GRP1_DisableClock(uint32_t Periphs) -{ - CLEAR_BIT(RCC->AHB2ENR, Periphs); -} - -/** - * @brief Force AHB2 peripherals reset. - * @rmtoll AHB2RSTR DCMIRST LL_AHB2_GRP1_ForceReset\n - * AHB2RSTR CRYPRST LL_AHB2_GRP1_ForceReset\n - * AHB2RSTR AESRST LL_AHB2_GRP1_ForceReset\n - * AHB2RSTR HASHRST LL_AHB2_GRP1_ForceReset\n - * AHB2RSTR RNGRST LL_AHB2_GRP1_ForceReset\n - * AHB2RSTR OTGFSRST LL_AHB2_GRP1_ForceReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB2_GRP1_PERIPH_ALL - * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB2_GRP1_ForceReset(uint32_t Periphs) -{ - SET_BIT(RCC->AHB2RSTR, Periphs); -} - -/** - * @brief Release AHB2 peripherals reset. - * @rmtoll AHB2RSTR DCMIRST LL_AHB2_GRP1_ReleaseReset\n - * AHB2RSTR CRYPRST LL_AHB2_GRP1_ReleaseReset\n - * AHB2RSTR AESRST LL_AHB2_GRP1_ReleaseReset\n - * AHB2RSTR HASHRST LL_AHB2_GRP1_ReleaseReset\n - * AHB2RSTR RNGRST LL_AHB2_GRP1_ReleaseReset\n - * AHB2RSTR OTGFSRST LL_AHB2_GRP1_ReleaseReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB2_GRP1_PERIPH_ALL - * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB2_GRP1_ReleaseReset(uint32_t Periphs) -{ - CLEAR_BIT(RCC->AHB2RSTR, Periphs); -} - -/** - * @brief Enable AHB2 peripheral clocks in low-power mode - * @rmtoll AHB2LPENR DCMILPEN LL_AHB2_GRP1_EnableClockLowPower\n - * AHB2LPENR CRYPLPEN LL_AHB2_GRP1_EnableClockLowPower\n - * AHB2LPENR AESLPEN LL_AHB2_GRP1_EnableClockLowPower\n - * AHB2LPENR HASHLPEN LL_AHB2_GRP1_EnableClockLowPower\n - * AHB2LPENR RNGLPEN LL_AHB2_GRP1_EnableClockLowPower\n - * AHB2LPENR OTGFSLPEN LL_AHB2_GRP1_EnableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB2_GRP1_EnableClockLowPower(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->AHB2LPENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->AHB2LPENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Disable AHB2 peripheral clocks in low-power mode - * @rmtoll AHB2LPENR DCMILPEN LL_AHB2_GRP1_DisableClockLowPower\n - * AHB2LPENR CRYPLPEN LL_AHB2_GRP1_DisableClockLowPower\n - * AHB2LPENR AESLPEN LL_AHB2_GRP1_DisableClockLowPower\n - * AHB2LPENR HASHLPEN LL_AHB2_GRP1_DisableClockLowPower\n - * AHB2LPENR RNGLPEN LL_AHB2_GRP1_DisableClockLowPower\n - * AHB2LPENR OTGFSLPEN LL_AHB2_GRP1_DisableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) - * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB2_GRP1_DisableClockLowPower(uint32_t Periphs) -{ - CLEAR_BIT(RCC->AHB2LPENR, Periphs); -} - -/** - * @} - */ -#endif /* RCC_AHB2_SUPPORT */ - -#if defined(RCC_AHB3_SUPPORT) -/** @defgroup BUS_LL_EF_AHB3 AHB3 - * @{ - */ - -/** - * @brief Enable AHB3 peripherals clock. - * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_EnableClock\n - * AHB3ENR FSMCEN LL_AHB3_GRP1_EnableClock\n - * AHB3ENR QSPIEN LL_AHB3_GRP1_EnableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB3_GRP1_EnableClock(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->AHB3ENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->AHB3ENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Check if AHB3 peripheral clock is enabled or not - * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_IsEnabledClock\n - * AHB3ENR FSMCEN LL_AHB3_GRP1_IsEnabledClock\n - * AHB3ENR QSPIEN LL_AHB3_GRP1_IsEnabledClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) - * - * (*) value not defined in all devices. - * @retval State of Periphs (1 or 0). -*/ -__STATIC_INLINE uint32_t LL_AHB3_GRP1_IsEnabledClock(uint32_t Periphs) -{ - return (READ_BIT(RCC->AHB3ENR, Periphs) == Periphs); -} - -/** - * @brief Disable AHB3 peripherals clock. - * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_DisableClock\n - * AHB3ENR FSMCEN LL_AHB3_GRP1_DisableClock\n - * AHB3ENR QSPIEN LL_AHB3_GRP1_DisableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB3_GRP1_DisableClock(uint32_t Periphs) -{ - CLEAR_BIT(RCC->AHB3ENR, Periphs); -} - -/** - * @brief Force AHB3 peripherals reset. - * @rmtoll AHB3RSTR FMCRST LL_AHB3_GRP1_ForceReset\n - * AHB3RSTR FSMCRST LL_AHB3_GRP1_ForceReset\n - * AHB3RSTR QSPIRST LL_AHB3_GRP1_ForceReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB3_GRP1_PERIPH_ALL - * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB3_GRP1_ForceReset(uint32_t Periphs) -{ - SET_BIT(RCC->AHB3RSTR, Periphs); -} - -/** - * @brief Release AHB3 peripherals reset. - * @rmtoll AHB3RSTR FMCRST LL_AHB3_GRP1_ReleaseReset\n - * AHB3RSTR FSMCRST LL_AHB3_GRP1_ReleaseReset\n - * AHB3RSTR QSPIRST LL_AHB3_GRP1_ReleaseReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB2_GRP1_PERIPH_ALL - * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB3_GRP1_ReleaseReset(uint32_t Periphs) -{ - CLEAR_BIT(RCC->AHB3RSTR, Periphs); -} - -/** - * @brief Enable AHB3 peripheral clocks in low-power mode - * @rmtoll AHB3LPENR FMCLPEN LL_AHB3_GRP1_EnableClockLowPower\n - * AHB3LPENR FSMCLPEN LL_AHB3_GRP1_EnableClockLowPower\n - * AHB3LPENR QSPILPEN LL_AHB3_GRP1_EnableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB3_GRP1_EnableClockLowPower(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->AHB3LPENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->AHB3LPENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Disable AHB3 peripheral clocks in low-power mode - * @rmtoll AHB3LPENR FMCLPEN LL_AHB3_GRP1_DisableClockLowPower\n - * AHB3LPENR FSMCLPEN LL_AHB3_GRP1_DisableClockLowPower\n - * AHB3LPENR QSPILPEN LL_AHB3_GRP1_DisableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) - * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_AHB3_GRP1_DisableClockLowPower(uint32_t Periphs) -{ - CLEAR_BIT(RCC->AHB3LPENR, Periphs); -} - -/** - * @} - */ -#endif /* RCC_AHB3_SUPPORT */ - -/** @defgroup BUS_LL_EF_APB1 APB1 - * @{ - */ - -/** - * @brief Enable APB1 peripherals clock. - * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_EnableClock\n - * APB1ENR TIM3EN LL_APB1_GRP1_EnableClock\n - * APB1ENR TIM4EN LL_APB1_GRP1_EnableClock\n - * APB1ENR TIM5EN LL_APB1_GRP1_EnableClock\n - * APB1ENR TIM6EN LL_APB1_GRP1_EnableClock\n - * APB1ENR TIM7EN LL_APB1_GRP1_EnableClock\n - * APB1ENR TIM12EN LL_APB1_GRP1_EnableClock\n - * APB1ENR TIM13EN LL_APB1_GRP1_EnableClock\n - * APB1ENR TIM14EN LL_APB1_GRP1_EnableClock\n - * APB1ENR LPTIM1EN LL_APB1_GRP1_EnableClock\n - * APB1ENR WWDGEN LL_APB1_GRP1_EnableClock\n - * APB1ENR SPI2EN LL_APB1_GRP1_EnableClock\n - * APB1ENR SPI3EN LL_APB1_GRP1_EnableClock\n - * APB1ENR SPDIFRXEN LL_APB1_GRP1_EnableClock\n - * APB1ENR USART2EN LL_APB1_GRP1_EnableClock\n - * APB1ENR USART3EN LL_APB1_GRP1_EnableClock\n - * APB1ENR UART4EN LL_APB1_GRP1_EnableClock\n - * APB1ENR UART5EN LL_APB1_GRP1_EnableClock\n - * APB1ENR I2C1EN LL_APB1_GRP1_EnableClock\n - * APB1ENR I2C2EN LL_APB1_GRP1_EnableClock\n - * APB1ENR I2C3EN LL_APB1_GRP1_EnableClock\n - * APB1ENR FMPI2C1EN LL_APB1_GRP1_EnableClock\n - * APB1ENR CAN1EN LL_APB1_GRP1_EnableClock\n - * APB1ENR CAN2EN LL_APB1_GRP1_EnableClock\n - * APB1ENR CAN3EN LL_APB1_GRP1_EnableClock\n - * APB1ENR CECEN LL_APB1_GRP1_EnableClock\n - * APB1ENR PWREN LL_APB1_GRP1_EnableClock\n - * APB1ENR DACEN LL_APB1_GRP1_EnableClock\n - * APB1ENR UART7EN LL_APB1_GRP1_EnableClock\n - * APB1ENR UART8EN LL_APB1_GRP1_EnableClock\n - * APB1ENR RTCAPBEN LL_APB1_GRP1_EnableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 - * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_WWDG - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) - * @arg @ref LL_APB1_GRP1_PERIPH_USART2 - * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) - * @arg @ref LL_APB1_GRP1_PERIPH_PWR - * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->APB1ENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->APB1ENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Check if APB1 peripheral clock is enabled or not - * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR TIM3EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR TIM4EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR TIM5EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR TIM6EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR TIM7EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR TIM12EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR TIM13EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR TIM14EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR LPTIM1EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR WWDGEN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR SPI2EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR SPI3EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR SPDIFRXEN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR USART2EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR USART3EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR UART4EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR UART5EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR I2C1EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR I2C2EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR I2C3EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR FMPI2C1EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR CAN1EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR CAN2EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR CAN3EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR CECEN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR PWREN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR DACEN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR UART7EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR UART8EN LL_APB1_GRP1_IsEnabledClock\n - * APB1ENR RTCAPBEN LL_APB1_GRP1_IsEnabledClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 - * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_WWDG - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) - * @arg @ref LL_APB1_GRP1_PERIPH_USART2 - * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) - * @arg @ref LL_APB1_GRP1_PERIPH_PWR - * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) - * - * (*) value not defined in all devices. - * @retval State of Periphs (1 or 0). -*/ -__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs) -{ - return (READ_BIT(RCC->APB1ENR, Periphs) == Periphs); -} - -/** - * @brief Disable APB1 peripherals clock. - * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_DisableClock\n - * APB1ENR TIM3EN LL_APB1_GRP1_DisableClock\n - * APB1ENR TIM4EN LL_APB1_GRP1_DisableClock\n - * APB1ENR TIM5EN LL_APB1_GRP1_DisableClock\n - * APB1ENR TIM6EN LL_APB1_GRP1_DisableClock\n - * APB1ENR TIM7EN LL_APB1_GRP1_DisableClock\n - * APB1ENR TIM12EN LL_APB1_GRP1_DisableClock\n - * APB1ENR TIM13EN LL_APB1_GRP1_DisableClock\n - * APB1ENR TIM14EN LL_APB1_GRP1_DisableClock\n - * APB1ENR LPTIM1EN LL_APB1_GRP1_DisableClock\n - * APB1ENR WWDGEN LL_APB1_GRP1_DisableClock\n - * APB1ENR SPI2EN LL_APB1_GRP1_DisableClock\n - * APB1ENR SPI3EN LL_APB1_GRP1_DisableClock\n - * APB1ENR SPDIFRXEN LL_APB1_GRP1_DisableClock\n - * APB1ENR USART2EN LL_APB1_GRP1_DisableClock\n - * APB1ENR USART3EN LL_APB1_GRP1_DisableClock\n - * APB1ENR UART4EN LL_APB1_GRP1_DisableClock\n - * APB1ENR UART5EN LL_APB1_GRP1_DisableClock\n - * APB1ENR I2C1EN LL_APB1_GRP1_DisableClock\n - * APB1ENR I2C2EN LL_APB1_GRP1_DisableClock\n - * APB1ENR I2C3EN LL_APB1_GRP1_DisableClock\n - * APB1ENR FMPI2C1EN LL_APB1_GRP1_DisableClock\n - * APB1ENR CAN1EN LL_APB1_GRP1_DisableClock\n - * APB1ENR CAN2EN LL_APB1_GRP1_DisableClock\n - * APB1ENR CAN3EN LL_APB1_GRP1_DisableClock\n - * APB1ENR CECEN LL_APB1_GRP1_DisableClock\n - * APB1ENR PWREN LL_APB1_GRP1_DisableClock\n - * APB1ENR DACEN LL_APB1_GRP1_DisableClock\n - * APB1ENR UART7EN LL_APB1_GRP1_DisableClock\n - * APB1ENR UART8EN LL_APB1_GRP1_DisableClock\n - * APB1ENR RTCAPBEN LL_APB1_GRP1_DisableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 - * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_WWDG - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) - * @arg @ref LL_APB1_GRP1_PERIPH_USART2 - * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) - * @arg @ref LL_APB1_GRP1_PERIPH_PWR - * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs) -{ - CLEAR_BIT(RCC->APB1ENR, Periphs); -} - -/** - * @brief Force APB1 peripherals reset. - * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR TIM3RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR TIM4RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR TIM5RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR TIM6RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR TIM7RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR TIM12RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR TIM13RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR TIM14RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR LPTIM1RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR WWDGRST LL_APB1_GRP1_ForceReset\n - * APB1RSTR SPI2RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR SPI3RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR SPDIFRXRST LL_APB1_GRP1_ForceReset\n - * APB1RSTR USART2RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR USART3RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR UART4RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR UART5RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR I2C1RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR I2C2RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR I2C3RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR FMPI2C1RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR CAN1RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR CAN2RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR CAN3RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR CECRST LL_APB1_GRP1_ForceReset\n - * APB1RSTR PWRRST LL_APB1_GRP1_ForceReset\n - * APB1RSTR DACRST LL_APB1_GRP1_ForceReset\n - * APB1RSTR UART7RST LL_APB1_GRP1_ForceReset\n - * APB1RSTR UART8RST LL_APB1_GRP1_ForceReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 - * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_WWDG - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) - * @arg @ref LL_APB1_GRP1_PERIPH_USART2 - * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) - * @arg @ref LL_APB1_GRP1_PERIPH_PWR - * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs) -{ - SET_BIT(RCC->APB1RSTR, Periphs); -} - -/** - * @brief Release APB1 peripherals reset. - * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR TIM3RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR TIM4RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR TIM5RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR TIM6RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR TIM7RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR TIM12RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR TIM13RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR TIM14RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR LPTIM1RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR WWDGRST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR SPI2RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR SPI3RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR SPDIFRXRST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR USART2RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR USART3RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR UART4RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR UART5RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR I2C1RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR I2C2RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR I2C3RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR FMPI2C1RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR CAN1RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR CAN2RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR CAN3RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR CECRST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR PWRRST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR DACRST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR UART7RST LL_APB1_GRP1_ReleaseReset\n - * APB1RSTR UART8RST LL_APB1_GRP1_ReleaseReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 - * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_WWDG - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) - * @arg @ref LL_APB1_GRP1_PERIPH_USART2 - * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) - * @arg @ref LL_APB1_GRP1_PERIPH_PWR - * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs) -{ - CLEAR_BIT(RCC->APB1RSTR, Periphs); -} - -/** - * @brief Enable APB1 peripheral clocks in low-power mode - * @rmtoll APB1LPENR TIM2LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR TIM3LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR TIM4LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR TIM5LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR TIM6LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR TIM7LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR TIM12LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR TIM13LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR TIM14LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR LPTIM1LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR WWDGLPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR SPI2LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR SPI3LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR SPDIFRXLPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR USART2LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR USART3LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR UART4LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR UART5LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR I2C1LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR I2C2LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR I2C3LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR FMPI2C1LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR CAN1LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR CAN2LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR CAN3LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR CECLPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR PWRLPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR DACLPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR UART7LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR UART8LPEN LL_APB1_GRP1_EnableClockLowPower\n - * APB1LPENR RTCAPBLPEN LL_APB1_GRP1_EnableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 - * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_WWDG - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) - * @arg @ref LL_APB1_GRP1_PERIPH_USART2 - * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) - * @arg @ref LL_APB1_GRP1_PERIPH_PWR - * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB1_GRP1_EnableClockLowPower(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->APB1LPENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->APB1LPENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Disable APB1 peripheral clocks in low-power mode - * @rmtoll APB1LPENR TIM2LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR TIM3LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR TIM4LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR TIM5LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR TIM6LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR TIM7LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR TIM12LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR TIM13LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR TIM14LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR LPTIM1LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR WWDGLPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR SPI2LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR SPI3LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR SPDIFRXLPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR USART2LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR USART3LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR UART4LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR UART5LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR I2C1LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR I2C2LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR I2C3LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR FMPI2C1LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR CAN1LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR CAN2LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR CAN3LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR CECLPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR PWRLPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR DACLPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR UART7LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR UART8LPEN LL_APB1_GRP1_DisableClockLowPower\n - * APB1LPENR RTCAPBLPEN LL_APB1_GRP1_DisableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 - * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_WWDG - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) - * @arg @ref LL_APB1_GRP1_PERIPH_USART2 - * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) - * @arg @ref LL_APB1_GRP1_PERIPH_PWR - * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) - * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB1_GRP1_DisableClockLowPower(uint32_t Periphs) -{ - CLEAR_BIT(RCC->APB1LPENR, Periphs); -} - -/** - * @} - */ - -/** @defgroup BUS_LL_EF_APB2 APB2 - * @{ - */ - -/** - * @brief Enable APB2 peripherals clock. - * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_EnableClock\n - * APB2ENR TIM8EN LL_APB2_GRP1_EnableClock\n - * APB2ENR USART1EN LL_APB2_GRP1_EnableClock\n - * APB2ENR USART6EN LL_APB2_GRP1_EnableClock\n - * APB2ENR UART9EN LL_APB2_GRP1_EnableClock\n - * APB2ENR UART10EN LL_APB2_GRP1_EnableClock\n - * APB2ENR ADC1EN LL_APB2_GRP1_EnableClock\n - * APB2ENR ADC2EN LL_APB2_GRP1_EnableClock\n - * APB2ENR ADC3EN LL_APB2_GRP1_EnableClock\n - * APB2ENR SDIOEN LL_APB2_GRP1_EnableClock\n - * APB2ENR SPI1EN LL_APB2_GRP1_EnableClock\n - * APB2ENR SPI4EN LL_APB2_GRP1_EnableClock\n - * APB2ENR SYSCFGEN LL_APB2_GRP1_EnableClock\n - * APB2ENR EXTITEN LL_APB2_GRP1_EnableClock\n - * APB2ENR TIM9EN LL_APB2_GRP1_EnableClock\n - * APB2ENR TIM10EN LL_APB2_GRP1_EnableClock\n - * APB2ENR TIM11EN LL_APB2_GRP1_EnableClock\n - * APB2ENR SPI5EN LL_APB2_GRP1_EnableClock\n - * APB2ENR SPI6EN LL_APB2_GRP1_EnableClock\n - * APB2ENR SAI1EN LL_APB2_GRP1_EnableClock\n - * APB2ENR SAI2EN LL_APB2_GRP1_EnableClock\n - * APB2ENR LTDCEN LL_APB2_GRP1_EnableClock\n - * APB2ENR DSIEN LL_APB2_GRP1_EnableClock\n - * APB2ENR DFSDM1EN LL_APB2_GRP1_EnableClock\n - * APB2ENR DFSDM2EN LL_APB2_GRP1_EnableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 - * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG - * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) - - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->APB2ENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->APB2ENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Check if APB2 peripheral clock is enabled or not - * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR TIM8EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR USART1EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR USART6EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR UART9EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR UART10EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR ADC1EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR ADC2EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR ADC3EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR SDIOEN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR SPI1EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR SPI4EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR SYSCFGEN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR EXTITEN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR TIM9EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR TIM10EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR TIM11EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR SPI5EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR SPI6EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR SAI1EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR SAI2EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR LTDCEN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR DSIEN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR DFSDM1EN LL_APB2_GRP1_IsEnabledClock\n - * APB2ENR DFSDM2EN LL_APB2_GRP1_IsEnabledClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 - * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG - * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) - * - * (*) value not defined in all devices. - * @retval State of Periphs (1 or 0). -*/ -__STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs) -{ - return (READ_BIT(RCC->APB2ENR, Periphs) == Periphs); -} - -/** - * @brief Disable APB2 peripherals clock. - * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_DisableClock\n - * APB2ENR TIM8EN LL_APB2_GRP1_DisableClock\n - * APB2ENR USART1EN LL_APB2_GRP1_DisableClock\n - * APB2ENR USART6EN LL_APB2_GRP1_DisableClock\n - * APB2ENR UART9EN LL_APB2_GRP1_DisableClock\n - * APB2ENR UART10EN LL_APB2_GRP1_DisableClock\n - * APB2ENR ADC1EN LL_APB2_GRP1_DisableClock\n - * APB2ENR ADC2EN LL_APB2_GRP1_DisableClock\n - * APB2ENR ADC3EN LL_APB2_GRP1_DisableClock\n - * APB2ENR SDIOEN LL_APB2_GRP1_DisableClock\n - * APB2ENR SPI1EN LL_APB2_GRP1_DisableClock\n - * APB2ENR SPI4EN LL_APB2_GRP1_DisableClock\n - * APB2ENR SYSCFGEN LL_APB2_GRP1_DisableClock\n - * APB2ENR EXTITEN LL_APB2_GRP1_DisableClock\n - * APB2ENR TIM9EN LL_APB2_GRP1_DisableClock\n - * APB2ENR TIM10EN LL_APB2_GRP1_DisableClock\n - * APB2ENR TIM11EN LL_APB2_GRP1_DisableClock\n - * APB2ENR SPI5EN LL_APB2_GRP1_DisableClock\n - * APB2ENR SPI6EN LL_APB2_GRP1_DisableClock\n - * APB2ENR SAI1EN LL_APB2_GRP1_DisableClock\n - * APB2ENR SAI2EN LL_APB2_GRP1_DisableClock\n - * APB2ENR LTDCEN LL_APB2_GRP1_DisableClock\n - * APB2ENR DSIEN LL_APB2_GRP1_DisableClock\n - * APB2ENR DFSDM1EN LL_APB2_GRP1_DisableClock\n - * APB2ENR DFSDM2EN LL_APB2_GRP1_DisableClock - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 - * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG - * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs) -{ - CLEAR_BIT(RCC->APB2ENR, Periphs); -} - -/** - * @brief Force APB2 peripherals reset. - * @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR TIM8RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR USART1RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR USART6RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR UART9RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR UART10RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR ADCRST LL_APB2_GRP1_ForceReset\n - * APB2RSTR SDIORST LL_APB2_GRP1_ForceReset\n - * APB2RSTR SPI1RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR SPI4RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR SYSCFGRST LL_APB2_GRP1_ForceReset\n - * APB2RSTR TIM9RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR TIM10RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR TIM11RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR SPI5RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR SPI6RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR SAI1RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR SAI2RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR LTDCRST LL_APB2_GRP1_ForceReset\n - * APB2RSTR DSIRST LL_APB2_GRP1_ForceReset\n - * APB2RSTR DFSDM1RST LL_APB2_GRP1_ForceReset\n - * APB2RSTR DFSDM2RST LL_APB2_GRP1_ForceReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB2_GRP1_PERIPH_ALL - * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC - * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG - * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs) -{ - SET_BIT(RCC->APB2RSTR, Periphs); -} - -/** - * @brief Release APB2 peripherals reset. - * @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR TIM8RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR USART1RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR USART6RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR UART9RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR UART10RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR ADCRST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR SDIORST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR SPI1RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR SPI4RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR SYSCFGRST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR TIM9RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR TIM10RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR TIM11RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR SPI5RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR SPI6RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR SAI1RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR SAI2RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR LTDCRST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR DSIRST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR DFSDM1RST LL_APB2_GRP1_ReleaseReset\n - * APB2RSTR DFSDM2RST LL_APB2_GRP1_ReleaseReset - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB2_GRP1_PERIPH_ALL - * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC - * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG - * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs) -{ - CLEAR_BIT(RCC->APB2RSTR, Periphs); -} - -/** - * @brief Enable APB2 peripheral clocks in low-power mode - * @rmtoll APB2LPENR TIM1LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR TIM8LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR USART1LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR USART6LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR UART9LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR UART10LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR ADC1LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR ADC2LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR ADC3LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR SDIOLPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR SPI1LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR SPI4LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR SYSCFGLPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR EXTITLPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR TIM9LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR TIM10LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR TIM11LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR SPI5LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR SPI6LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR SAI1LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR SAI2LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR LTDCLPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR DSILPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR DFSDM1LPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR DSILPEN LL_APB2_GRP1_EnableClockLowPower\n - * APB2LPENR DFSDM2LPEN LL_APB2_GRP1_EnableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 - * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG - * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB2_GRP1_EnableClockLowPower(uint32_t Periphs) -{ - __IO uint32_t tmpreg; - SET_BIT(RCC->APB2LPENR, Periphs); - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->APB2LPENR, Periphs); - (void)tmpreg; -} - -/** - * @brief Disable APB2 peripheral clocks in low-power mode - * @rmtoll APB2LPENR TIM1LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR TIM8LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR USART1LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR USART6LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR UART9LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR UART10LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR ADC1LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR ADC2LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR ADC3LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR SDIOLPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR SPI1LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR SPI4LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR SYSCFGLPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR EXTITLPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR TIM9LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR TIM10LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR TIM11LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR SPI5LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR SPI6LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR SAI1LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR SAI2LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR LTDCLPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR DSILPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR DFSDM1LPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR DSILPEN LL_APB2_GRP1_DisableClockLowPower\n - * APB2LPENR DFSDM2LPEN LL_APB2_GRP1_DisableClockLowPower - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 - * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG - * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 - * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) - * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) - * - * (*) value not defined in all devices. - * @retval None -*/ -__STATIC_INLINE void LL_APB2_GRP1_DisableClockLowPower(uint32_t Periphs) -{ - CLEAR_BIT(RCC->APB2LPENR, Periphs); -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined(RCC) */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_BUS_H */ - +/** + ****************************************************************************** + * @file stm32f4xx_ll_bus.h + * @author MCD Application Team + * @brief Header file of BUS LL module. + + @verbatim + ##### RCC Limitations ##### + ============================================================================== + [..] + A delay between an RCC peripheral clock enable and the effective peripheral + enabling should be taken into account in order to manage the peripheral read/write + from/to registers. + (+) This delay depends on the peripheral mapping. + (++) AHB & APB peripherals, 1 dummy read is necessary + + [..] + Workarounds: + (#) For AHB & APB peripherals, a dummy read to the peripheral register has been + inserted in each LL_{BUS}_GRP{x}_EnableClock() function. + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_LL_BUS_H +#define __STM32F4xx_LL_BUS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @defgroup BUS_LL BUS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants + * @{ + */ + +/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH + * @{ + */ +#define LL_AHB1_GRP1_PERIPH_ALL 0xFFFFFFFFU +#define LL_AHB1_GRP1_PERIPH_GPIOA RCC_AHB1ENR_GPIOAEN +#define LL_AHB1_GRP1_PERIPH_GPIOB RCC_AHB1ENR_GPIOBEN +#define LL_AHB1_GRP1_PERIPH_GPIOC RCC_AHB1ENR_GPIOCEN +#if defined(GPIOD) +#define LL_AHB1_GRP1_PERIPH_GPIOD RCC_AHB1ENR_GPIODEN +#endif /* GPIOD */ +#if defined(GPIOE) +#define LL_AHB1_GRP1_PERIPH_GPIOE RCC_AHB1ENR_GPIOEEN +#endif /* GPIOE */ +#if defined(GPIOF) +#define LL_AHB1_GRP1_PERIPH_GPIOF RCC_AHB1ENR_GPIOFEN +#endif /* GPIOF */ +#if defined(GPIOG) +#define LL_AHB1_GRP1_PERIPH_GPIOG RCC_AHB1ENR_GPIOGEN +#endif /* GPIOG */ +#if defined(GPIOH) +#define LL_AHB1_GRP1_PERIPH_GPIOH RCC_AHB1ENR_GPIOHEN +#endif /* GPIOH */ +#if defined(GPIOI) +#define LL_AHB1_GRP1_PERIPH_GPIOI RCC_AHB1ENR_GPIOIEN +#endif /* GPIOI */ +#if defined(GPIOJ) +#define LL_AHB1_GRP1_PERIPH_GPIOJ RCC_AHB1ENR_GPIOJEN +#endif /* GPIOJ */ +#if defined(GPIOK) +#define LL_AHB1_GRP1_PERIPH_GPIOK RCC_AHB1ENR_GPIOKEN +#endif /* GPIOK */ +#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHB1ENR_CRCEN +#if defined(RCC_AHB1ENR_BKPSRAMEN) +#define LL_AHB1_GRP1_PERIPH_BKPSRAM RCC_AHB1ENR_BKPSRAMEN +#endif /* RCC_AHB1ENR_BKPSRAMEN */ +#if defined(RCC_AHB1ENR_CCMDATARAMEN) +#define LL_AHB1_GRP1_PERIPH_CCMDATARAM RCC_AHB1ENR_CCMDATARAMEN +#endif /* RCC_AHB1ENR_CCMDATARAMEN */ +#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHB1ENR_DMA1EN +#define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHB1ENR_DMA2EN +#if defined(RCC_AHB1ENR_RNGEN) +#define LL_AHB1_GRP1_PERIPH_RNG RCC_AHB1ENR_RNGEN +#endif /* RCC_AHB1ENR_RNGEN */ +#if defined(DMA2D) +#define LL_AHB1_GRP1_PERIPH_DMA2D RCC_AHB1ENR_DMA2DEN +#endif /* DMA2D */ +#if defined(ETH) +#define LL_AHB1_GRP1_PERIPH_ETHMAC RCC_AHB1ENR_ETHMACEN +#define LL_AHB1_GRP1_PERIPH_ETHMACTX RCC_AHB1ENR_ETHMACTXEN +#define LL_AHB1_GRP1_PERIPH_ETHMACRX RCC_AHB1ENR_ETHMACRXEN +#define LL_AHB1_GRP1_PERIPH_ETHMACPTP RCC_AHB1ENR_ETHMACPTPEN +#endif /* ETH */ +#if defined(USB_OTG_HS) +#define LL_AHB1_GRP1_PERIPH_OTGHS RCC_AHB1ENR_OTGHSEN +#define LL_AHB1_GRP1_PERIPH_OTGHSULPI RCC_AHB1ENR_OTGHSULPIEN +#endif /* USB_OTG_HS */ +#define LL_AHB1_GRP1_PERIPH_FLITF RCC_AHB1LPENR_FLITFLPEN +#define LL_AHB1_GRP1_PERIPH_SRAM1 RCC_AHB1LPENR_SRAM1LPEN +#if defined(RCC_AHB1LPENR_SRAM2LPEN) +#define LL_AHB1_GRP1_PERIPH_SRAM2 RCC_AHB1LPENR_SRAM2LPEN +#endif /* RCC_AHB1LPENR_SRAM2LPEN */ +#if defined(RCC_AHB1LPENR_SRAM3LPEN) +#define LL_AHB1_GRP1_PERIPH_SRAM3 RCC_AHB1LPENR_SRAM3LPEN +#endif /* RCC_AHB1LPENR_SRAM3LPEN */ +/** + * @} + */ + +#if defined(RCC_AHB2_SUPPORT) +/** @defgroup BUS_LL_EC_AHB2_GRP1_PERIPH AHB2 GRP1 PERIPH + * @{ + */ +#define LL_AHB2_GRP1_PERIPH_ALL 0xFFFFFFFFU +#if defined(DCMI) +#define LL_AHB2_GRP1_PERIPH_DCMI RCC_AHB2ENR_DCMIEN +#endif /* DCMI */ +#if defined(CRYP) +#define LL_AHB2_GRP1_PERIPH_CRYP RCC_AHB2ENR_CRYPEN +#endif /* CRYP */ +#if defined(AES) +#define LL_AHB2_GRP1_PERIPH_AES RCC_AHB2ENR_AESEN +#endif /* AES */ +#if defined(HASH) +#define LL_AHB2_GRP1_PERIPH_HASH RCC_AHB2ENR_HASHEN +#endif /* HASH */ +#if defined(RCC_AHB2ENR_RNGEN) +#define LL_AHB2_GRP1_PERIPH_RNG RCC_AHB2ENR_RNGEN +#endif /* RCC_AHB2ENR_RNGEN */ +#if defined(USB_OTG_FS) +#define LL_AHB2_GRP1_PERIPH_OTGFS RCC_AHB2ENR_OTGFSEN +#endif /* USB_OTG_FS */ +/** + * @} + */ +#endif /* RCC_AHB2_SUPPORT */ + +#if defined(RCC_AHB3_SUPPORT) +/** @defgroup BUS_LL_EC_AHB3_GRP1_PERIPH AHB3 GRP1 PERIPH + * @{ + */ +#define LL_AHB3_GRP1_PERIPH_ALL 0xFFFFFFFFU +#if defined(FSMC_Bank1) +#define LL_AHB3_GRP1_PERIPH_FSMC RCC_AHB3ENR_FSMCEN +#endif /* FSMC_Bank1 */ +#if defined(FMC_Bank1) +#define LL_AHB3_GRP1_PERIPH_FMC RCC_AHB3ENR_FMCEN +#endif /* FMC_Bank1 */ +#if defined(QUADSPI) +#define LL_AHB3_GRP1_PERIPH_QSPI RCC_AHB3ENR_QSPIEN +#endif /* QUADSPI */ +/** + * @} + */ +#endif /* RCC_AHB3_SUPPORT */ + +/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH + * @{ + */ +#define LL_APB1_GRP1_PERIPH_ALL 0xFFFFFFFFU +#if defined(TIM2) +#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR_TIM2EN +#endif /* TIM2 */ +#if defined(TIM3) +#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1ENR_TIM3EN +#endif /* TIM3 */ +#if defined(TIM4) +#define LL_APB1_GRP1_PERIPH_TIM4 RCC_APB1ENR_TIM4EN +#endif /* TIM4 */ +#define LL_APB1_GRP1_PERIPH_TIM5 RCC_APB1ENR_TIM5EN +#if defined(TIM6) +#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1ENR_TIM6EN +#endif /* TIM6 */ +#if defined(TIM7) +#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1ENR_TIM7EN +#endif /* TIM7 */ +#if defined(TIM12) +#define LL_APB1_GRP1_PERIPH_TIM12 RCC_APB1ENR_TIM12EN +#endif /* TIM12 */ +#if defined(TIM13) +#define LL_APB1_GRP1_PERIPH_TIM13 RCC_APB1ENR_TIM13EN +#endif /* TIM13 */ +#if defined(TIM14) +#define LL_APB1_GRP1_PERIPH_TIM14 RCC_APB1ENR_TIM14EN +#endif /* TIM14 */ +#if defined(LPTIM1) +#define LL_APB1_GRP1_PERIPH_LPTIM1 RCC_APB1ENR_LPTIM1EN +#endif /* LPTIM1 */ +#if defined(RCC_APB1ENR_RTCAPBEN) +#define LL_APB1_GRP1_PERIPH_RTCAPB RCC_APB1ENR_RTCAPBEN +#endif /* RCC_APB1ENR_RTCAPBEN */ +#define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR_WWDGEN +#if defined(SPI2) +#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR_SPI2EN +#endif /* SPI2 */ +#if defined(SPI3) +#define LL_APB1_GRP1_PERIPH_SPI3 RCC_APB1ENR_SPI3EN +#endif /* SPI3 */ +#if defined(SPDIFRX) +#define LL_APB1_GRP1_PERIPH_SPDIFRX RCC_APB1ENR_SPDIFRXEN +#endif /* SPDIFRX */ +#define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1ENR_USART2EN +#if defined(USART3) +#define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1ENR_USART3EN +#endif /* USART3 */ +#if defined(UART4) +#define LL_APB1_GRP1_PERIPH_UART4 RCC_APB1ENR_UART4EN +#endif /* UART4 */ +#if defined(UART5) +#define LL_APB1_GRP1_PERIPH_UART5 RCC_APB1ENR_UART5EN +#endif /* UART5 */ +#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR_I2C1EN +#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR_I2C2EN +#if defined(I2C3) +#define LL_APB1_GRP1_PERIPH_I2C3 RCC_APB1ENR_I2C3EN +#endif /* I2C3 */ +#if defined(FMPI2C1) +#define LL_APB1_GRP1_PERIPH_FMPI2C1 RCC_APB1ENR_FMPI2C1EN +#endif /* FMPI2C1 */ +#if defined(CAN1) +#define LL_APB1_GRP1_PERIPH_CAN1 RCC_APB1ENR_CAN1EN +#endif /* CAN1 */ +#if defined(CAN2) +#define LL_APB1_GRP1_PERIPH_CAN2 RCC_APB1ENR_CAN2EN +#endif /* CAN2 */ +#if defined(CAN3) +#define LL_APB1_GRP1_PERIPH_CAN3 RCC_APB1ENR_CAN3EN +#endif /* CAN3 */ +#if defined(CEC) +#define LL_APB1_GRP1_PERIPH_CEC RCC_APB1ENR_CECEN +#endif /* CEC */ +#define LL_APB1_GRP1_PERIPH_PWR RCC_APB1ENR_PWREN +#if defined(DAC1) +#define LL_APB1_GRP1_PERIPH_DAC1 RCC_APB1ENR_DACEN +#endif /* DAC1 */ +#if defined(UART7) +#define LL_APB1_GRP1_PERIPH_UART7 RCC_APB1ENR_UART7EN +#endif /* UART7 */ +#if defined(UART8) +#define LL_APB1_GRP1_PERIPH_UART8 RCC_APB1ENR_UART8EN +#endif /* UART8 */ +/** + * @} + */ + +/** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH + * @{ + */ +#define LL_APB2_GRP1_PERIPH_ALL 0xFFFFFFFFU +#define LL_APB2_GRP1_PERIPH_TIM1 RCC_APB2ENR_TIM1EN +#if defined(TIM8) +#define LL_APB2_GRP1_PERIPH_TIM8 RCC_APB2ENR_TIM8EN +#endif /* TIM8 */ +#define LL_APB2_GRP1_PERIPH_USART1 RCC_APB2ENR_USART1EN +#if defined(USART6) +#define LL_APB2_GRP1_PERIPH_USART6 RCC_APB2ENR_USART6EN +#endif /* USART6 */ +#if defined(UART9) +#define LL_APB2_GRP1_PERIPH_UART9 RCC_APB2ENR_UART9EN +#endif /* UART9 */ +#if defined(UART10) +#define LL_APB2_GRP1_PERIPH_UART10 RCC_APB2ENR_UART10EN +#endif /* UART10 */ +#define LL_APB2_GRP1_PERIPH_ADC1 RCC_APB2ENR_ADC1EN +#if defined(ADC2) +#define LL_APB2_GRP1_PERIPH_ADC2 RCC_APB2ENR_ADC2EN +#endif /* ADC2 */ +#if defined(ADC3) +#define LL_APB2_GRP1_PERIPH_ADC3 RCC_APB2ENR_ADC3EN +#endif /* ADC3 */ +#if defined(SDIO) +#define LL_APB2_GRP1_PERIPH_SDIO RCC_APB2ENR_SDIOEN +#endif /* SDIO */ +#define LL_APB2_GRP1_PERIPH_SPI1 RCC_APB2ENR_SPI1EN +#if defined(SPI4) +#define LL_APB2_GRP1_PERIPH_SPI4 RCC_APB2ENR_SPI4EN +#endif /* SPI4 */ +#define LL_APB2_GRP1_PERIPH_SYSCFG RCC_APB2ENR_SYSCFGEN +#if defined(RCC_APB2ENR_EXTITEN) +#define LL_APB2_GRP1_PERIPH_EXTI RCC_APB2ENR_EXTITEN +#endif /* RCC_APB2ENR_EXTITEN */ +#define LL_APB2_GRP1_PERIPH_TIM9 RCC_APB2ENR_TIM9EN +#if defined(TIM10) +#define LL_APB2_GRP1_PERIPH_TIM10 RCC_APB2ENR_TIM10EN +#endif /* TIM10 */ +#define LL_APB2_GRP1_PERIPH_TIM11 RCC_APB2ENR_TIM11EN +#if defined(SPI5) +#define LL_APB2_GRP1_PERIPH_SPI5 RCC_APB2ENR_SPI5EN +#endif /* SPI5 */ +#if defined(SPI6) +#define LL_APB2_GRP1_PERIPH_SPI6 RCC_APB2ENR_SPI6EN +#endif /* SPI6 */ +#if defined(SAI1) +#define LL_APB2_GRP1_PERIPH_SAI1 RCC_APB2ENR_SAI1EN +#endif /* SAI1 */ +#if defined(SAI2) +#define LL_APB2_GRP1_PERIPH_SAI2 RCC_APB2ENR_SAI2EN +#endif /* SAI2 */ +#if defined(LTDC) +#define LL_APB2_GRP1_PERIPH_LTDC RCC_APB2ENR_LTDCEN +#endif /* LTDC */ +#if defined(DSI) +#define LL_APB2_GRP1_PERIPH_DSI RCC_APB2ENR_DSIEN +#endif /* DSI */ +#if defined(DFSDM1_Channel0) +#define LL_APB2_GRP1_PERIPH_DFSDM1 RCC_APB2ENR_DFSDM1EN +#endif /* DFSDM1_Channel0 */ +#if defined(DFSDM2_Channel0) +#define LL_APB2_GRP1_PERIPH_DFSDM2 RCC_APB2ENR_DFSDM2EN +#endif /* DFSDM2_Channel0 */ +#define LL_APB2_GRP1_PERIPH_ADC RCC_APB2RSTR_ADCRST +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions + * @{ + */ + +/** @defgroup BUS_LL_EF_AHB1 AHB1 + * @{ + */ + +/** + * @brief Enable AHB1 peripherals clock. + * @rmtoll AHB1ENR GPIOAEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR GPIOBEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR GPIOCEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR GPIODEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR GPIOEEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR GPIOFEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR GPIOGEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR GPIOHEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR GPIOIEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR GPIOJEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR GPIOKEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR CRCEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR BKPSRAMEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR CCMDATARAMEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR DMA1EN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR DMA2EN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR RNGEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR DMA2DEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR ETHMACEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR ETHMACTXEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR ETHMACRXEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR ETHMACPTPEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR OTGHSEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR OTGHSULPIEN LL_AHB1_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CCMDATARAM (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB1ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB1ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if AHB1 peripheral clock is enabled or not + * @rmtoll AHB1ENR GPIOAEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR GPIOBEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR GPIOCEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR GPIODEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR GPIOEEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR GPIOFEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR GPIOGEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR GPIOHEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR GPIOIEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR GPIOJEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR GPIOKEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR BKPSRAMEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR CCMDATARAMEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR RNGEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR DMA2DEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR ETHMACEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR ETHMACTXEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR ETHMACRXEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR ETHMACPTPEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR OTGHSEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR OTGHSULPIEN LL_AHB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CCMDATARAM (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval State of Periphs (1 or 0). +*/ +__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return (READ_BIT(RCC->AHB1ENR, Periphs) == Periphs); +} + +/** + * @brief Disable AHB1 peripherals clock. + * @rmtoll AHB1ENR GPIOAEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR GPIOBEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR GPIOCEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR GPIODEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR GPIOEEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR GPIOFEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR GPIOGEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR GPIOHEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR GPIOIEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR GPIOJEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR GPIOKEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR CRCEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR BKPSRAMEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR CCMDATARAMEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR DMA1EN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR DMA2EN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR RNGEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR DMA2DEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR ETHMACEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR ETHMACTXEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR ETHMACRXEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR ETHMACPTPEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR OTGHSEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR OTGHSULPIEN LL_AHB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CCMDATARAM (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB1ENR, Periphs); +} + +/** + * @brief Force AHB1 peripherals reset. + * @rmtoll AHB1RSTR GPIOARST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR GPIOBRST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR GPIOCRST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR GPIODRST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR GPIOERST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR GPIOFRST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR GPIOGRST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR GPIOHRST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR GPIOIRST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR GPIOJRST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR GPIOKRST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR CRCRST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR DMA1RST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR DMA2RST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR RNGRST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR DMA2DRST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR ETHMACRST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR OTGHSRST LL_AHB1_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_ALL + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->AHB1RSTR, Periphs); +} + +/** + * @brief Release AHB1 peripherals reset. + * @rmtoll AHB1RSTR GPIOARST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR GPIOBRST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR GPIOCRST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR GPIODRST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR GPIOERST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR GPIOFRST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR GPIOGRST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR GPIOHRST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR GPIOIRST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR GPIOJRST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR GPIOKRST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR CRCRST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR DMA1RST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR DMA2RST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR RNGRST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR DMA2DRST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR ETHMACRST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR OTGHSRST LL_AHB1_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_ALL + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB1RSTR, Periphs); +} + +/** + * @brief Enable AHB1 peripheral clocks in low-power mode + * @rmtoll AHB1LPENR GPIOALPEN LL_AHB1_GRP1_EnableClockLowPower\n + * AHB1LPENR GPIOBLPEN LL_AHB1_GRP1_EnableClockLowPower\n + * AHB1LPENR GPIOCLPEN LL_AHB1_GRP1_EnableClockLowPower\n + * AHB1LPENR GPIODLPEN LL_AHB1_GRP1_EnableClockLowPower\n + * AHB1LPENR GPIOELPEN LL_AHB1_GRP1_EnableClockLowPower\n + * AHB1LPENR GPIOFLPEN LL_AHB1_GRP1_EnableClockLowPower\n + * AHB1LPENR GPIOGLPEN LL_AHB1_GRP1_EnableClockLowPower\n + * AHB1LPENR GPIOHLPEN LL_AHB1_GRP1_EnableClockLowPower\n + * AHB1LPENR GPIOILPEN LL_AHB1_GRP1_EnableClockLowPower\n + * AHB1LPENR GPIOJLPEN LL_AHB1_GRP1_EnableClockLowPower\n + * AHB1LPENR GPIOKLPEN LL_AHB1_GRP1_EnableClockLowPower\n + * AHB1LPENR CRCLPEN LL_AHB1_GRP1_EnableClockLowPower\n + * AHB1LPENR BKPSRAMLPEN LL_AHB1_GRP1_EnableClockLowPower\n + * AHB1LPENR FLITFLPEN LL_AHB1_GRP1_EnableClockLowPower\n + * AHB1LPENR SRAM1LPEN LL_AHB1_GRP1_EnableClockLowPower\n + * AHB1LPENR SRAM2LPEN LL_AHB1_GRP1_EnableClockLowPower\n + * AHB1LPENR SRAM3LPEN LL_AHB1_GRP1_EnableClockLowPower\n + * AHB1LPENR BKPSRAMLPEN LL_AHB1_GRP1_EnableClockLowPower\n + * AHB1LPENR DMA1LPEN LL_AHB1_GRP1_EnableClockLowPower\n + * AHB1LPENR DMA2LPEN LL_AHB1_GRP1_EnableClockLowPower\n + * AHB1LPENR DMA2DLPEN LL_AHB1_GRP1_EnableClockLowPower\n + * AHB1LPENR RNGLPEN LL_AHB1_GRP1_EnableClockLowPower\n + * AHB1LPENR ETHMACLPEN LL_AHB1_GRP1_EnableClockLowPower\n + * AHB1LPENR ETHMACTXLPEN LL_AHB1_GRP1_EnableClockLowPower\n + * AHB1LPENR ETHMACRXLPEN LL_AHB1_GRP1_EnableClockLowPower\n + * AHB1LPENR ETHMACPTPLPEN LL_AHB1_GRP1_EnableClockLowPower\n + * AHB1LPENR OTGHSLPEN LL_AHB1_GRP1_EnableClockLowPower\n + * AHB1LPENR OTGHSULPILPEN LL_AHB1_GRP1_EnableClockLowPower + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_FLITF + * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1 + * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM2 (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM3 (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_EnableClockLowPower(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB1LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB1LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable AHB1 peripheral clocks in low-power mode + * @rmtoll AHB1LPENR GPIOALPEN LL_AHB1_GRP1_DisableClockLowPower\n + * AHB1LPENR GPIOBLPEN LL_AHB1_GRP1_DisableClockLowPower\n + * AHB1LPENR GPIOCLPEN LL_AHB1_GRP1_DisableClockLowPower\n + * AHB1LPENR GPIODLPEN LL_AHB1_GRP1_DisableClockLowPower\n + * AHB1LPENR GPIOELPEN LL_AHB1_GRP1_DisableClockLowPower\n + * AHB1LPENR GPIOFLPEN LL_AHB1_GRP1_DisableClockLowPower\n + * AHB1LPENR GPIOGLPEN LL_AHB1_GRP1_DisableClockLowPower\n + * AHB1LPENR GPIOHLPEN LL_AHB1_GRP1_DisableClockLowPower\n + * AHB1LPENR GPIOILPEN LL_AHB1_GRP1_DisableClockLowPower\n + * AHB1LPENR GPIOJLPEN LL_AHB1_GRP1_DisableClockLowPower\n + * AHB1LPENR GPIOKLPEN LL_AHB1_GRP1_DisableClockLowPower\n + * AHB1LPENR CRCLPEN LL_AHB1_GRP1_DisableClockLowPower\n + * AHB1LPENR BKPSRAMLPEN LL_AHB1_GRP1_DisableClockLowPower\n + * AHB1LPENR FLITFLPEN LL_AHB1_GRP1_DisableClockLowPower\n + * AHB1LPENR SRAM1LPEN LL_AHB1_GRP1_DisableClockLowPower\n + * AHB1LPENR SRAM2LPEN LL_AHB1_GRP1_DisableClockLowPower\n + * AHB1LPENR SRAM3LPEN LL_AHB1_GRP1_DisableClockLowPower\n + * AHB1LPENR BKPSRAMLPEN LL_AHB1_GRP1_DisableClockLowPower\n + * AHB1LPENR DMA1LPEN LL_AHB1_GRP1_DisableClockLowPower\n + * AHB1LPENR DMA2LPEN LL_AHB1_GRP1_DisableClockLowPower\n + * AHB1LPENR DMA2DLPEN LL_AHB1_GRP1_DisableClockLowPower\n + * AHB1LPENR RNGLPEN LL_AHB1_GRP1_DisableClockLowPower\n + * AHB1LPENR ETHMACLPEN LL_AHB1_GRP1_DisableClockLowPower\n + * AHB1LPENR ETHMACTXLPEN LL_AHB1_GRP1_DisableClockLowPower\n + * AHB1LPENR ETHMACRXLPEN LL_AHB1_GRP1_DisableClockLowPower\n + * AHB1LPENR ETHMACPTPLPEN LL_AHB1_GRP1_DisableClockLowPower\n + * AHB1LPENR OTGHSLPEN LL_AHB1_GRP1_DisableClockLowPower\n + * AHB1LPENR OTGHSULPILPEN LL_AHB1_GRP1_DisableClockLowPower + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_FLITF + * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1 + * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM2 (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM3 (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_DisableClockLowPower(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB1LPENR, Periphs); +} + +/** + * @} + */ + +#if defined(RCC_AHB2_SUPPORT) +/** @defgroup BUS_LL_EF_AHB2 AHB2 + * @{ + */ + +/** + * @brief Enable AHB2 peripherals clock. + * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR CRYPEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR AESEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR HASHEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR RNGEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR OTGFSEN LL_AHB2_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB2_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB2ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB2ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if AHB2 peripheral clock is enabled or not + * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR CRYPEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR AESEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR HASHEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR RNGEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR OTGFSEN LL_AHB2_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) + * + * (*) value not defined in all devices. + * @retval State of Periphs (1 or 0). +*/ +__STATIC_INLINE uint32_t LL_AHB2_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return (READ_BIT(RCC->AHB2ENR, Periphs) == Periphs); +} + +/** + * @brief Disable AHB2 peripherals clock. + * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR CRYPEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR AESEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR HASHEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR RNGEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR OTGFSEN LL_AHB2_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB2_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB2ENR, Periphs); +} + +/** + * @brief Force AHB2 peripherals reset. + * @rmtoll AHB2RSTR DCMIRST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR CRYPRST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR AESRST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR HASHRST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR RNGRST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR OTGFSRST LL_AHB2_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_ALL + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB2_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->AHB2RSTR, Periphs); +} + +/** + * @brief Release AHB2 peripherals reset. + * @rmtoll AHB2RSTR DCMIRST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR CRYPRST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR AESRST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR HASHRST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR RNGRST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR OTGFSRST LL_AHB2_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_ALL + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB2_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB2RSTR, Periphs); +} + +/** + * @brief Enable AHB2 peripheral clocks in low-power mode + * @rmtoll AHB2LPENR DCMILPEN LL_AHB2_GRP1_EnableClockLowPower\n + * AHB2LPENR CRYPLPEN LL_AHB2_GRP1_EnableClockLowPower\n + * AHB2LPENR AESLPEN LL_AHB2_GRP1_EnableClockLowPower\n + * AHB2LPENR HASHLPEN LL_AHB2_GRP1_EnableClockLowPower\n + * AHB2LPENR RNGLPEN LL_AHB2_GRP1_EnableClockLowPower\n + * AHB2LPENR OTGFSLPEN LL_AHB2_GRP1_EnableClockLowPower + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB2_GRP1_EnableClockLowPower(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB2LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB2LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable AHB2 peripheral clocks in low-power mode + * @rmtoll AHB2LPENR DCMILPEN LL_AHB2_GRP1_DisableClockLowPower\n + * AHB2LPENR CRYPLPEN LL_AHB2_GRP1_DisableClockLowPower\n + * AHB2LPENR AESLPEN LL_AHB2_GRP1_DisableClockLowPower\n + * AHB2LPENR HASHLPEN LL_AHB2_GRP1_DisableClockLowPower\n + * AHB2LPENR RNGLPEN LL_AHB2_GRP1_DisableClockLowPower\n + * AHB2LPENR OTGFSLPEN LL_AHB2_GRP1_DisableClockLowPower + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB2_GRP1_DisableClockLowPower(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB2LPENR, Periphs); +} + +/** + * @} + */ +#endif /* RCC_AHB2_SUPPORT */ + +#if defined(RCC_AHB3_SUPPORT) +/** @defgroup BUS_LL_EF_AHB3 AHB3 + * @{ + */ + +/** + * @brief Enable AHB3 peripherals clock. + * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_EnableClock\n + * AHB3ENR FSMCEN LL_AHB3_GRP1_EnableClock\n + * AHB3ENR QSPIEN LL_AHB3_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB3_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB3ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB3ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if AHB3 peripheral clock is enabled or not + * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR FSMCEN LL_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR QSPIEN LL_AHB3_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * + * (*) value not defined in all devices. + * @retval State of Periphs (1 or 0). +*/ +__STATIC_INLINE uint32_t LL_AHB3_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return (READ_BIT(RCC->AHB3ENR, Periphs) == Periphs); +} + +/** + * @brief Disable AHB3 peripherals clock. + * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_DisableClock\n + * AHB3ENR FSMCEN LL_AHB3_GRP1_DisableClock\n + * AHB3ENR QSPIEN LL_AHB3_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB3_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB3ENR, Periphs); +} + +/** + * @brief Force AHB3 peripherals reset. + * @rmtoll AHB3RSTR FMCRST LL_AHB3_GRP1_ForceReset\n + * AHB3RSTR FSMCRST LL_AHB3_GRP1_ForceReset\n + * AHB3RSTR QSPIRST LL_AHB3_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_ALL + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB3_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->AHB3RSTR, Periphs); +} + +/** + * @brief Release AHB3 peripherals reset. + * @rmtoll AHB3RSTR FMCRST LL_AHB3_GRP1_ReleaseReset\n + * AHB3RSTR FSMCRST LL_AHB3_GRP1_ReleaseReset\n + * AHB3RSTR QSPIRST LL_AHB3_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_ALL + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB3_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB3RSTR, Periphs); +} + +/** + * @brief Enable AHB3 peripheral clocks in low-power mode + * @rmtoll AHB3LPENR FMCLPEN LL_AHB3_GRP1_EnableClockLowPower\n + * AHB3LPENR FSMCLPEN LL_AHB3_GRP1_EnableClockLowPower\n + * AHB3LPENR QSPILPEN LL_AHB3_GRP1_EnableClockLowPower + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB3_GRP1_EnableClockLowPower(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB3LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB3LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable AHB3 peripheral clocks in low-power mode + * @rmtoll AHB3LPENR FMCLPEN LL_AHB3_GRP1_DisableClockLowPower\n + * AHB3LPENR FSMCLPEN LL_AHB3_GRP1_DisableClockLowPower\n + * AHB3LPENR QSPILPEN LL_AHB3_GRP1_DisableClockLowPower + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB3_GRP1_DisableClockLowPower(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB3LPENR, Periphs); +} + +/** + * @} + */ +#endif /* RCC_AHB3_SUPPORT */ + +/** @defgroup BUS_LL_EF_APB1 APB1 + * @{ + */ + +/** + * @brief Enable APB1 peripherals clock. + * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_EnableClock\n + * APB1ENR TIM3EN LL_APB1_GRP1_EnableClock\n + * APB1ENR TIM4EN LL_APB1_GRP1_EnableClock\n + * APB1ENR TIM5EN LL_APB1_GRP1_EnableClock\n + * APB1ENR TIM6EN LL_APB1_GRP1_EnableClock\n + * APB1ENR TIM7EN LL_APB1_GRP1_EnableClock\n + * APB1ENR TIM12EN LL_APB1_GRP1_EnableClock\n + * APB1ENR TIM13EN LL_APB1_GRP1_EnableClock\n + * APB1ENR TIM14EN LL_APB1_GRP1_EnableClock\n + * APB1ENR LPTIM1EN LL_APB1_GRP1_EnableClock\n + * APB1ENR WWDGEN LL_APB1_GRP1_EnableClock\n + * APB1ENR SPI2EN LL_APB1_GRP1_EnableClock\n + * APB1ENR SPI3EN LL_APB1_GRP1_EnableClock\n + * APB1ENR SPDIFRXEN LL_APB1_GRP1_EnableClock\n + * APB1ENR USART2EN LL_APB1_GRP1_EnableClock\n + * APB1ENR USART3EN LL_APB1_GRP1_EnableClock\n + * APB1ENR UART4EN LL_APB1_GRP1_EnableClock\n + * APB1ENR UART5EN LL_APB1_GRP1_EnableClock\n + * APB1ENR I2C1EN LL_APB1_GRP1_EnableClock\n + * APB1ENR I2C2EN LL_APB1_GRP1_EnableClock\n + * APB1ENR I2C3EN LL_APB1_GRP1_EnableClock\n + * APB1ENR FMPI2C1EN LL_APB1_GRP1_EnableClock\n + * APB1ENR CAN1EN LL_APB1_GRP1_EnableClock\n + * APB1ENR CAN2EN LL_APB1_GRP1_EnableClock\n + * APB1ENR CAN3EN LL_APB1_GRP1_EnableClock\n + * APB1ENR CECEN LL_APB1_GRP1_EnableClock\n + * APB1ENR PWREN LL_APB1_GRP1_EnableClock\n + * APB1ENR DACEN LL_APB1_GRP1_EnableClock\n + * APB1ENR UART7EN LL_APB1_GRP1_EnableClock\n + * APB1ENR UART8EN LL_APB1_GRP1_EnableClock\n + * APB1ENR RTCAPBEN LL_APB1_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB1ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB1ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB1 peripheral clock is enabled or not + * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR TIM3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR TIM4EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR TIM5EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR TIM6EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR TIM7EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR TIM12EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR TIM13EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR TIM14EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR LPTIM1EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR WWDGEN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR SPI2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR SPI3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR SPDIFRXEN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR USART2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR USART3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR UART4EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR UART5EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR I2C1EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR I2C2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR I2C3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR FMPI2C1EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR CAN1EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR CAN2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR CAN3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR CECEN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR PWREN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR DACEN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR UART7EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR UART8EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR RTCAPBEN LL_APB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) + * + * (*) value not defined in all devices. + * @retval State of Periphs (1 or 0). +*/ +__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return (READ_BIT(RCC->APB1ENR, Periphs) == Periphs); +} + +/** + * @brief Disable APB1 peripherals clock. + * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_DisableClock\n + * APB1ENR TIM3EN LL_APB1_GRP1_DisableClock\n + * APB1ENR TIM4EN LL_APB1_GRP1_DisableClock\n + * APB1ENR TIM5EN LL_APB1_GRP1_DisableClock\n + * APB1ENR TIM6EN LL_APB1_GRP1_DisableClock\n + * APB1ENR TIM7EN LL_APB1_GRP1_DisableClock\n + * APB1ENR TIM12EN LL_APB1_GRP1_DisableClock\n + * APB1ENR TIM13EN LL_APB1_GRP1_DisableClock\n + * APB1ENR TIM14EN LL_APB1_GRP1_DisableClock\n + * APB1ENR LPTIM1EN LL_APB1_GRP1_DisableClock\n + * APB1ENR WWDGEN LL_APB1_GRP1_DisableClock\n + * APB1ENR SPI2EN LL_APB1_GRP1_DisableClock\n + * APB1ENR SPI3EN LL_APB1_GRP1_DisableClock\n + * APB1ENR SPDIFRXEN LL_APB1_GRP1_DisableClock\n + * APB1ENR USART2EN LL_APB1_GRP1_DisableClock\n + * APB1ENR USART3EN LL_APB1_GRP1_DisableClock\n + * APB1ENR UART4EN LL_APB1_GRP1_DisableClock\n + * APB1ENR UART5EN LL_APB1_GRP1_DisableClock\n + * APB1ENR I2C1EN LL_APB1_GRP1_DisableClock\n + * APB1ENR I2C2EN LL_APB1_GRP1_DisableClock\n + * APB1ENR I2C3EN LL_APB1_GRP1_DisableClock\n + * APB1ENR FMPI2C1EN LL_APB1_GRP1_DisableClock\n + * APB1ENR CAN1EN LL_APB1_GRP1_DisableClock\n + * APB1ENR CAN2EN LL_APB1_GRP1_DisableClock\n + * APB1ENR CAN3EN LL_APB1_GRP1_DisableClock\n + * APB1ENR CECEN LL_APB1_GRP1_DisableClock\n + * APB1ENR PWREN LL_APB1_GRP1_DisableClock\n + * APB1ENR DACEN LL_APB1_GRP1_DisableClock\n + * APB1ENR UART7EN LL_APB1_GRP1_DisableClock\n + * APB1ENR UART8EN LL_APB1_GRP1_DisableClock\n + * APB1ENR RTCAPBEN LL_APB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1ENR, Periphs); +} + +/** + * @brief Force APB1 peripherals reset. + * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR TIM3RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR TIM4RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR TIM5RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR TIM6RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR TIM7RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR TIM12RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR TIM13RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR TIM14RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR LPTIM1RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR WWDGRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR SPI2RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR SPI3RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR SPDIFRXRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR USART2RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR USART3RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR UART4RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR UART5RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR I2C1RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR I2C2RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR I2C3RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR FMPI2C1RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR CAN1RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR CAN2RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR CAN3RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR CECRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR PWRRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR DACRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR UART7RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR UART8RST LL_APB1_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB1RSTR, Periphs); +} + +/** + * @brief Release APB1 peripherals reset. + * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR TIM3RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR TIM4RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR TIM5RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR TIM6RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR TIM7RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR TIM12RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR TIM13RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR TIM14RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR LPTIM1RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR WWDGRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR SPI2RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR SPI3RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR SPDIFRXRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR USART2RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR USART3RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR UART4RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR UART5RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR I2C1RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR I2C2RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR I2C3RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR FMPI2C1RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR CAN1RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR CAN2RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR CAN3RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR CECRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR PWRRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR DACRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR UART7RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR UART8RST LL_APB1_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1RSTR, Periphs); +} + +/** + * @brief Enable APB1 peripheral clocks in low-power mode + * @rmtoll APB1LPENR TIM2LPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR TIM3LPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR TIM4LPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR TIM5LPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR TIM6LPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR TIM7LPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR TIM12LPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR TIM13LPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR TIM14LPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR LPTIM1LPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR WWDGLPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR SPI2LPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR SPI3LPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR SPDIFRXLPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR USART2LPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR USART3LPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR UART4LPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR UART5LPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR I2C1LPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR I2C2LPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR I2C3LPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR FMPI2C1LPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR CAN1LPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR CAN2LPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR CAN3LPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR CECLPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR PWRLPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR DACLPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR UART7LPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR UART8LPEN LL_APB1_GRP1_EnableClockLowPower\n + * APB1LPENR RTCAPBLPEN LL_APB1_GRP1_EnableClockLowPower + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_EnableClockLowPower(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB1LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB1LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable APB1 peripheral clocks in low-power mode + * @rmtoll APB1LPENR TIM2LPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR TIM3LPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR TIM4LPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR TIM5LPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR TIM6LPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR TIM7LPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR TIM12LPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR TIM13LPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR TIM14LPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR LPTIM1LPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR WWDGLPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR SPI2LPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR SPI3LPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR SPDIFRXLPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR USART2LPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR USART3LPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR UART4LPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR UART5LPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR I2C1LPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR I2C2LPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR I2C3LPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR FMPI2C1LPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR CAN1LPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR CAN2LPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR CAN3LPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR CECLPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR PWRLPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR DACLPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR UART7LPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR UART8LPEN LL_APB1_GRP1_DisableClockLowPower\n + * APB1LPENR RTCAPBLPEN LL_APB1_GRP1_DisableClockLowPower + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*) + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_DisableClockLowPower(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1LPENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB2 APB2 + * @{ + */ + +/** + * @brief Enable APB2 peripherals clock. + * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM8EN LL_APB2_GRP1_EnableClock\n + * APB2ENR USART1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR USART6EN LL_APB2_GRP1_EnableClock\n + * APB2ENR UART9EN LL_APB2_GRP1_EnableClock\n + * APB2ENR UART10EN LL_APB2_GRP1_EnableClock\n + * APB2ENR ADC1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR ADC2EN LL_APB2_GRP1_EnableClock\n + * APB2ENR ADC3EN LL_APB2_GRP1_EnableClock\n + * APB2ENR SDIOEN LL_APB2_GRP1_EnableClock\n + * APB2ENR SPI1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR SPI4EN LL_APB2_GRP1_EnableClock\n + * APB2ENR SYSCFGEN LL_APB2_GRP1_EnableClock\n + * APB2ENR EXTITEN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM9EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM10EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM11EN LL_APB2_GRP1_EnableClock\n + * APB2ENR SPI5EN LL_APB2_GRP1_EnableClock\n + * APB2ENR SPI6EN LL_APB2_GRP1_EnableClock\n + * APB2ENR SAI1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR SAI2EN LL_APB2_GRP1_EnableClock\n + * APB2ENR LTDCEN LL_APB2_GRP1_EnableClock\n + * APB2ENR DSIEN LL_APB2_GRP1_EnableClock\n + * APB2ENR DFSDM1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR DFSDM2EN LL_APB2_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) + + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB2ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB2ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB2 peripheral clock is enabled or not + * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM8EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR USART1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR USART6EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR UART9EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR UART10EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR ADC1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR ADC2EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR ADC3EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SDIOEN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SPI1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SPI4EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SYSCFGEN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR EXTITEN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM9EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM10EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM11EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SPI5EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SPI6EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SAI1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SAI2EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR LTDCEN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR DSIEN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR DFSDM1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR DFSDM2EN LL_APB2_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval State of Periphs (1 or 0). +*/ +__STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return (READ_BIT(RCC->APB2ENR, Periphs) == Periphs); +} + +/** + * @brief Disable APB2 peripherals clock. + * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM8EN LL_APB2_GRP1_DisableClock\n + * APB2ENR USART1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR USART6EN LL_APB2_GRP1_DisableClock\n + * APB2ENR UART9EN LL_APB2_GRP1_DisableClock\n + * APB2ENR UART10EN LL_APB2_GRP1_DisableClock\n + * APB2ENR ADC1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR ADC2EN LL_APB2_GRP1_DisableClock\n + * APB2ENR ADC3EN LL_APB2_GRP1_DisableClock\n + * APB2ENR SDIOEN LL_APB2_GRP1_DisableClock\n + * APB2ENR SPI1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR SPI4EN LL_APB2_GRP1_DisableClock\n + * APB2ENR SYSCFGEN LL_APB2_GRP1_DisableClock\n + * APB2ENR EXTITEN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM9EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM10EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM11EN LL_APB2_GRP1_DisableClock\n + * APB2ENR SPI5EN LL_APB2_GRP1_DisableClock\n + * APB2ENR SPI6EN LL_APB2_GRP1_DisableClock\n + * APB2ENR SAI1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR SAI2EN LL_APB2_GRP1_DisableClock\n + * APB2ENR LTDCEN LL_APB2_GRP1_DisableClock\n + * APB2ENR DSIEN LL_APB2_GRP1_DisableClock\n + * APB2ENR DFSDM1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR DFSDM2EN LL_APB2_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB2ENR, Periphs); +} + +/** + * @brief Force APB2 peripherals reset. + * @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM8RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR USART1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR USART6RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR UART9RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR UART10RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR ADCRST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SDIORST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SPI1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SPI4RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SYSCFGRST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM9RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM10RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM11RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SPI5RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SPI6RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SAI1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SAI2RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR LTDCRST LL_APB2_GRP1_ForceReset\n + * APB2RSTR DSIRST LL_APB2_GRP1_ForceReset\n + * APB2RSTR DFSDM1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR DFSDM2RST LL_APB2_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_ALL + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_ADC + * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB2RSTR, Periphs); +} + +/** + * @brief Release APB2 peripherals reset. + * @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM8RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR USART1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR USART6RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR UART9RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR UART10RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR ADCRST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SDIORST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SPI1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SPI4RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SYSCFGRST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM9RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM10RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM11RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SPI5RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SPI6RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SAI1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SAI2RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR LTDCRST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR DSIRST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR DFSDM1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR DFSDM2RST LL_APB2_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_ALL + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_ADC + * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB2RSTR, Periphs); +} + +/** + * @brief Enable APB2 peripheral clocks in low-power mode + * @rmtoll APB2LPENR TIM1LPEN LL_APB2_GRP1_EnableClockLowPower\n + * APB2LPENR TIM8LPEN LL_APB2_GRP1_EnableClockLowPower\n + * APB2LPENR USART1LPEN LL_APB2_GRP1_EnableClockLowPower\n + * APB2LPENR USART6LPEN LL_APB2_GRP1_EnableClockLowPower\n + * APB2LPENR UART9LPEN LL_APB2_GRP1_EnableClockLowPower\n + * APB2LPENR UART10LPEN LL_APB2_GRP1_EnableClockLowPower\n + * APB2LPENR ADC1LPEN LL_APB2_GRP1_EnableClockLowPower\n + * APB2LPENR ADC2LPEN LL_APB2_GRP1_EnableClockLowPower\n + * APB2LPENR ADC3LPEN LL_APB2_GRP1_EnableClockLowPower\n + * APB2LPENR SDIOLPEN LL_APB2_GRP1_EnableClockLowPower\n + * APB2LPENR SPI1LPEN LL_APB2_GRP1_EnableClockLowPower\n + * APB2LPENR SPI4LPEN LL_APB2_GRP1_EnableClockLowPower\n + * APB2LPENR SYSCFGLPEN LL_APB2_GRP1_EnableClockLowPower\n + * APB2LPENR EXTITLPEN LL_APB2_GRP1_EnableClockLowPower\n + * APB2LPENR TIM9LPEN LL_APB2_GRP1_EnableClockLowPower\n + * APB2LPENR TIM10LPEN LL_APB2_GRP1_EnableClockLowPower\n + * APB2LPENR TIM11LPEN LL_APB2_GRP1_EnableClockLowPower\n + * APB2LPENR SPI5LPEN LL_APB2_GRP1_EnableClockLowPower\n + * APB2LPENR SPI6LPEN LL_APB2_GRP1_EnableClockLowPower\n + * APB2LPENR SAI1LPEN LL_APB2_GRP1_EnableClockLowPower\n + * APB2LPENR SAI2LPEN LL_APB2_GRP1_EnableClockLowPower\n + * APB2LPENR LTDCLPEN LL_APB2_GRP1_EnableClockLowPower\n + * APB2LPENR DSILPEN LL_APB2_GRP1_EnableClockLowPower\n + * APB2LPENR DFSDM1LPEN LL_APB2_GRP1_EnableClockLowPower\n + * APB2LPENR DSILPEN LL_APB2_GRP1_EnableClockLowPower\n + * APB2LPENR DFSDM2LPEN LL_APB2_GRP1_EnableClockLowPower + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_EnableClockLowPower(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB2LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB2LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable APB2 peripheral clocks in low-power mode + * @rmtoll APB2LPENR TIM1LPEN LL_APB2_GRP1_DisableClockLowPower\n + * APB2LPENR TIM8LPEN LL_APB2_GRP1_DisableClockLowPower\n + * APB2LPENR USART1LPEN LL_APB2_GRP1_DisableClockLowPower\n + * APB2LPENR USART6LPEN LL_APB2_GRP1_DisableClockLowPower\n + * APB2LPENR UART9LPEN LL_APB2_GRP1_DisableClockLowPower\n + * APB2LPENR UART10LPEN LL_APB2_GRP1_DisableClockLowPower\n + * APB2LPENR ADC1LPEN LL_APB2_GRP1_DisableClockLowPower\n + * APB2LPENR ADC2LPEN LL_APB2_GRP1_DisableClockLowPower\n + * APB2LPENR ADC3LPEN LL_APB2_GRP1_DisableClockLowPower\n + * APB2LPENR SDIOLPEN LL_APB2_GRP1_DisableClockLowPower\n + * APB2LPENR SPI1LPEN LL_APB2_GRP1_DisableClockLowPower\n + * APB2LPENR SPI4LPEN LL_APB2_GRP1_DisableClockLowPower\n + * APB2LPENR SYSCFGLPEN LL_APB2_GRP1_DisableClockLowPower\n + * APB2LPENR EXTITLPEN LL_APB2_GRP1_DisableClockLowPower\n + * APB2LPENR TIM9LPEN LL_APB2_GRP1_DisableClockLowPower\n + * APB2LPENR TIM10LPEN LL_APB2_GRP1_DisableClockLowPower\n + * APB2LPENR TIM11LPEN LL_APB2_GRP1_DisableClockLowPower\n + * APB2LPENR SPI5LPEN LL_APB2_GRP1_DisableClockLowPower\n + * APB2LPENR SPI6LPEN LL_APB2_GRP1_DisableClockLowPower\n + * APB2LPENR SAI1LPEN LL_APB2_GRP1_DisableClockLowPower\n + * APB2LPENR SAI2LPEN LL_APB2_GRP1_DisableClockLowPower\n + * APB2LPENR LTDCLPEN LL_APB2_GRP1_DisableClockLowPower\n + * APB2LPENR DSILPEN LL_APB2_GRP1_DisableClockLowPower\n + * APB2LPENR DFSDM1LPEN LL_APB2_GRP1_DisableClockLowPower\n + * APB2LPENR DSILPEN LL_APB2_GRP1_DisableClockLowPower\n + * APB2LPENR DFSDM2LPEN LL_APB2_GRP1_DisableClockLowPower + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_DisableClockLowPower(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB2LPENR, Periphs); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RCC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_LL_BUS_H */ + diff --git a/Drivers/stm32f4xx_ll_cortex.h b/libs/hal/stm32f4xx_ll_cortex.h similarity index 97% rename from Drivers/stm32f4xx_ll_cortex.h rename to libs/hal/stm32f4xx_ll_cortex.h index 4b11b73..d478e13 100644 --- a/Drivers/stm32f4xx_ll_cortex.h +++ b/libs/hal/stm32f4xx_ll_cortex.h @@ -1,637 +1,637 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_cortex.h - * @author MCD Application Team - * @brief Header file of CORTEX LL module. - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The LL CORTEX driver contains a set of generic APIs that can be - used by user: - (+) SYSTICK configuration used by LL_mDelay and LL_Init1msTick - functions - (+) Low power mode configuration (SCB register of Cortex-MCU) - (+) MPU API to configure and enable regions - (MPU services provided only on some devices) - (+) API to access to MCU info (CPUID register) - (+) API to enable fault handler (SHCSR accesses) - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_CORTEX_H -#define __STM32F4xx_LL_CORTEX_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -/** @defgroup CORTEX_LL CORTEX - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ - -/* Private constants ---------------------------------------------------------*/ - -/* Private macros ------------------------------------------------------------*/ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup CORTEX_LL_Exported_Constants CORTEX Exported Constants - * @{ - */ - -/** @defgroup CORTEX_LL_EC_CLKSOURCE_HCLK SYSTICK Clock Source - * @{ - */ -#define LL_SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U /*!< AHB clock divided by 8 selected as SysTick clock source.*/ -#define LL_SYSTICK_CLKSOURCE_HCLK SysTick_CTRL_CLKSOURCE_Msk /*!< AHB clock selected as SysTick clock source. */ -/** - * @} - */ - -/** @defgroup CORTEX_LL_EC_FAULT Handler Fault type - * @{ - */ -#define LL_HANDLER_FAULT_USG SCB_SHCSR_USGFAULTENA_Msk /*!< Usage fault */ -#define LL_HANDLER_FAULT_BUS SCB_SHCSR_BUSFAULTENA_Msk /*!< Bus fault */ -#define LL_HANDLER_FAULT_MEM SCB_SHCSR_MEMFAULTENA_Msk /*!< Memory management fault */ -/** - * @} - */ - -#if __MPU_PRESENT - -/** @defgroup CORTEX_LL_EC_CTRL_HFNMI_PRIVDEF MPU Control - * @{ - */ -#define LL_MPU_CTRL_HFNMI_PRIVDEF_NONE 0x00000000U /*!< Disable NMI and privileged SW access */ -#define LL_MPU_CTRL_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk /*!< Enables the operation of MPU during hard fault, NMI, and FAULTMASK handlers */ -#define LL_MPU_CTRL_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk /*!< Enable privileged software access to default memory map */ -#define LL_MPU_CTRL_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) /*!< Enable NMI and privileged SW access */ -/** - * @} - */ - -/** @defgroup CORTEX_LL_EC_REGION MPU Region Number - * @{ - */ -#define LL_MPU_REGION_NUMBER0 0x00U /*!< REGION Number 0 */ -#define LL_MPU_REGION_NUMBER1 0x01U /*!< REGION Number 1 */ -#define LL_MPU_REGION_NUMBER2 0x02U /*!< REGION Number 2 */ -#define LL_MPU_REGION_NUMBER3 0x03U /*!< REGION Number 3 */ -#define LL_MPU_REGION_NUMBER4 0x04U /*!< REGION Number 4 */ -#define LL_MPU_REGION_NUMBER5 0x05U /*!< REGION Number 5 */ -#define LL_MPU_REGION_NUMBER6 0x06U /*!< REGION Number 6 */ -#define LL_MPU_REGION_NUMBER7 0x07U /*!< REGION Number 7 */ -/** - * @} - */ - -/** @defgroup CORTEX_LL_EC_REGION_SIZE MPU Region Size - * @{ - */ -#define LL_MPU_REGION_SIZE_32B (0x04U << MPU_RASR_SIZE_Pos) /*!< 32B Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_64B (0x05U << MPU_RASR_SIZE_Pos) /*!< 64B Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_128B (0x06U << MPU_RASR_SIZE_Pos) /*!< 128B Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_256B (0x07U << MPU_RASR_SIZE_Pos) /*!< 256B Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_512B (0x08U << MPU_RASR_SIZE_Pos) /*!< 512B Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_1KB (0x09U << MPU_RASR_SIZE_Pos) /*!< 1KB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_2KB (0x0AU << MPU_RASR_SIZE_Pos) /*!< 2KB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_4KB (0x0BU << MPU_RASR_SIZE_Pos) /*!< 4KB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_8KB (0x0CU << MPU_RASR_SIZE_Pos) /*!< 8KB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_16KB (0x0DU << MPU_RASR_SIZE_Pos) /*!< 16KB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_32KB (0x0EU << MPU_RASR_SIZE_Pos) /*!< 32KB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_64KB (0x0FU << MPU_RASR_SIZE_Pos) /*!< 64KB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_128KB (0x10U << MPU_RASR_SIZE_Pos) /*!< 128KB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_256KB (0x11U << MPU_RASR_SIZE_Pos) /*!< 256KB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_512KB (0x12U << MPU_RASR_SIZE_Pos) /*!< 512KB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_1MB (0x13U << MPU_RASR_SIZE_Pos) /*!< 1MB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_2MB (0x14U << MPU_RASR_SIZE_Pos) /*!< 2MB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_4MB (0x15U << MPU_RASR_SIZE_Pos) /*!< 4MB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_8MB (0x16U << MPU_RASR_SIZE_Pos) /*!< 8MB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_16MB (0x17U << MPU_RASR_SIZE_Pos) /*!< 16MB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_32MB (0x18U << MPU_RASR_SIZE_Pos) /*!< 32MB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_64MB (0x19U << MPU_RASR_SIZE_Pos) /*!< 64MB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_128MB (0x1AU << MPU_RASR_SIZE_Pos) /*!< 128MB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_256MB (0x1BU << MPU_RASR_SIZE_Pos) /*!< 256MB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_512MB (0x1CU << MPU_RASR_SIZE_Pos) /*!< 512MB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_1GB (0x1DU << MPU_RASR_SIZE_Pos) /*!< 1GB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_2GB (0x1EU << MPU_RASR_SIZE_Pos) /*!< 2GB Size of the MPU protection region */ -#define LL_MPU_REGION_SIZE_4GB (0x1FU << MPU_RASR_SIZE_Pos) /*!< 4GB Size of the MPU protection region */ -/** - * @} - */ - -/** @defgroup CORTEX_LL_EC_REGION_PRIVILEDGES MPU Region Privileges - * @{ - */ -#define LL_MPU_REGION_NO_ACCESS (0x00U << MPU_RASR_AP_Pos) /*!< No access*/ -#define LL_MPU_REGION_PRIV_RW (0x01U << MPU_RASR_AP_Pos) /*!< RW privileged (privileged access only)*/ -#define LL_MPU_REGION_PRIV_RW_URO (0x02U << MPU_RASR_AP_Pos) /*!< RW privileged - RO user (Write in a user program generates a fault) */ -#define LL_MPU_REGION_FULL_ACCESS (0x03U << MPU_RASR_AP_Pos) /*!< RW privileged & user (Full access) */ -#define LL_MPU_REGION_PRIV_RO (0x05U << MPU_RASR_AP_Pos) /*!< RO privileged (privileged read only)*/ -#define LL_MPU_REGION_PRIV_RO_URO (0x06U << MPU_RASR_AP_Pos) /*!< RO privileged & user (read only) */ -/** - * @} - */ - -/** @defgroup CORTEX_LL_EC_TEX MPU TEX Level - * @{ - */ -#define LL_MPU_TEX_LEVEL0 (0x00U << MPU_RASR_TEX_Pos) /*!< b000 for TEX bits */ -#define LL_MPU_TEX_LEVEL1 (0x01U << MPU_RASR_TEX_Pos) /*!< b001 for TEX bits */ -#define LL_MPU_TEX_LEVEL2 (0x02U << MPU_RASR_TEX_Pos) /*!< b010 for TEX bits */ -#define LL_MPU_TEX_LEVEL4 (0x04U << MPU_RASR_TEX_Pos) /*!< b100 for TEX bits */ -/** - * @} - */ - -/** @defgroup CORTEX_LL_EC_INSTRUCTION_ACCESS MPU Instruction Access - * @{ - */ -#define LL_MPU_INSTRUCTION_ACCESS_ENABLE 0x00U /*!< Instruction fetches enabled */ -#define LL_MPU_INSTRUCTION_ACCESS_DISABLE MPU_RASR_XN_Msk /*!< Instruction fetches disabled*/ -/** - * @} - */ - -/** @defgroup CORTEX_LL_EC_SHAREABLE_ACCESS MPU Shareable Access - * @{ - */ -#define LL_MPU_ACCESS_SHAREABLE MPU_RASR_S_Msk /*!< Shareable memory attribute */ -#define LL_MPU_ACCESS_NOT_SHAREABLE 0x00U /*!< Not Shareable memory attribute */ -/** - * @} - */ - -/** @defgroup CORTEX_LL_EC_CACHEABLE_ACCESS MPU Cacheable Access - * @{ - */ -#define LL_MPU_ACCESS_CACHEABLE MPU_RASR_C_Msk /*!< Cacheable memory attribute */ -#define LL_MPU_ACCESS_NOT_CACHEABLE 0x00U /*!< Not Cacheable memory attribute */ -/** - * @} - */ - -/** @defgroup CORTEX_LL_EC_BUFFERABLE_ACCESS MPU Bufferable Access - * @{ - */ -#define LL_MPU_ACCESS_BUFFERABLE MPU_RASR_B_Msk /*!< Bufferable memory attribute */ -#define LL_MPU_ACCESS_NOT_BUFFERABLE 0x00U /*!< Not Bufferable memory attribute */ -/** - * @} - */ -#endif /* __MPU_PRESENT */ -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup CORTEX_LL_Exported_Functions CORTEX Exported Functions - * @{ - */ - -/** @defgroup CORTEX_LL_EF_SYSTICK SYSTICK - * @{ - */ - -/** - * @brief This function checks if the Systick counter flag is active or not. - * @note It can be used in timeout function on application side. - * @rmtoll STK_CTRL COUNTFLAG LL_SYSTICK_IsActiveCounterFlag - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void) -{ - return ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk)); -} - -/** - * @brief Configures the SysTick clock source - * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_SetClkSource - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8 - * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK - * @retval None - */ -__STATIC_INLINE void LL_SYSTICK_SetClkSource(uint32_t Source) -{ - if (Source == LL_SYSTICK_CLKSOURCE_HCLK) - { - SET_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); - } - else - { - CLEAR_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); - } -} - -/** - * @brief Get the SysTick clock source - * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_GetClkSource - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8 - * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK - */ -__STATIC_INLINE uint32_t LL_SYSTICK_GetClkSource(void) -{ - return READ_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); -} - -/** - * @brief Enable SysTick exception request - * @rmtoll STK_CTRL TICKINT LL_SYSTICK_EnableIT - * @retval None - */ -__STATIC_INLINE void LL_SYSTICK_EnableIT(void) -{ - SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); -} - -/** - * @brief Disable SysTick exception request - * @rmtoll STK_CTRL TICKINT LL_SYSTICK_DisableIT - * @retval None - */ -__STATIC_INLINE void LL_SYSTICK_DisableIT(void) -{ - CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); -} - -/** - * @brief Checks if the SYSTICK interrupt is enabled or disabled. - * @rmtoll STK_CTRL TICKINT LL_SYSTICK_IsEnabledIT - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_SYSTICK_IsEnabledIT(void) -{ - return (READ_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk) == (SysTick_CTRL_TICKINT_Msk)); -} - -/** - * @} - */ - -/** @defgroup CORTEX_LL_EF_LOW_POWER_MODE LOW POWER MODE - * @{ - */ - -/** - * @brief Processor uses sleep as its low power mode - * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableSleep - * @retval None - */ -__STATIC_INLINE void LL_LPM_EnableSleep(void) -{ - /* Clear SLEEPDEEP bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); -} - -/** - * @brief Processor uses deep sleep as its low power mode - * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableDeepSleep - * @retval None - */ -__STATIC_INLINE void LL_LPM_EnableDeepSleep(void) -{ - /* Set SLEEPDEEP bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); -} - -/** - * @brief Configures sleep-on-exit when returning from Handler mode to Thread mode. - * @note Setting this bit to 1 enables an interrupt-driven application to avoid returning to an - * empty main application. - * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_EnableSleepOnExit - * @retval None - */ -__STATIC_INLINE void LL_LPM_EnableSleepOnExit(void) -{ - /* Set SLEEPONEXIT bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); -} - -/** - * @brief Do not sleep when returning to Thread mode. - * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_DisableSleepOnExit - * @retval None - */ -__STATIC_INLINE void LL_LPM_DisableSleepOnExit(void) -{ - /* Clear SLEEPONEXIT bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); -} - -/** - * @brief Enabled events and all interrupts, including disabled interrupts, can wakeup the - * processor. - * @rmtoll SCB_SCR SEVEONPEND LL_LPM_EnableEventOnPend - * @retval None - */ -__STATIC_INLINE void LL_LPM_EnableEventOnPend(void) -{ - /* Set SEVEONPEND bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); -} - -/** - * @brief Only enabled interrupts or events can wakeup the processor, disabled interrupts are - * excluded - * @rmtoll SCB_SCR SEVEONPEND LL_LPM_DisableEventOnPend - * @retval None - */ -__STATIC_INLINE void LL_LPM_DisableEventOnPend(void) -{ - /* Clear SEVEONPEND bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); -} - -/** - * @} - */ - -/** @defgroup CORTEX_LL_EF_HANDLER HANDLER - * @{ - */ - -/** - * @brief Enable a fault in System handler control register (SHCSR) - * @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_EnableFault - * @param Fault This parameter can be a combination of the following values: - * @arg @ref LL_HANDLER_FAULT_USG - * @arg @ref LL_HANDLER_FAULT_BUS - * @arg @ref LL_HANDLER_FAULT_MEM - * @retval None - */ -__STATIC_INLINE void LL_HANDLER_EnableFault(uint32_t Fault) -{ - /* Enable the system handler fault */ - SET_BIT(SCB->SHCSR, Fault); -} - -/** - * @brief Disable a fault in System handler control register (SHCSR) - * @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_DisableFault - * @param Fault This parameter can be a combination of the following values: - * @arg @ref LL_HANDLER_FAULT_USG - * @arg @ref LL_HANDLER_FAULT_BUS - * @arg @ref LL_HANDLER_FAULT_MEM - * @retval None - */ -__STATIC_INLINE void LL_HANDLER_DisableFault(uint32_t Fault) -{ - /* Disable the system handler fault */ - CLEAR_BIT(SCB->SHCSR, Fault); -} - -/** - * @} - */ - -/** @defgroup CORTEX_LL_EF_MCU_INFO MCU INFO - * @{ - */ - -/** - * @brief Get Implementer code - * @rmtoll SCB_CPUID IMPLEMENTER LL_CPUID_GetImplementer - * @retval Value should be equal to 0x41 for ARM - */ -__STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void) -{ - return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_IMPLEMENTER_Msk) >> SCB_CPUID_IMPLEMENTER_Pos); -} - -/** - * @brief Get Variant number (The r value in the rnpn product revision identifier) - * @rmtoll SCB_CPUID VARIANT LL_CPUID_GetVariant - * @retval Value between 0 and 255 (0x0: revision 0) - */ -__STATIC_INLINE uint32_t LL_CPUID_GetVariant(void) -{ - return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_VARIANT_Msk) >> SCB_CPUID_VARIANT_Pos); -} - -/** - * @brief Get Constant number - * @rmtoll SCB_CPUID ARCHITECTURE LL_CPUID_GetConstant - * @retval Value should be equal to 0xF for Cortex-M4 devices - */ -__STATIC_INLINE uint32_t LL_CPUID_GetConstant(void) -{ - return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_ARCHITECTURE_Msk) >> SCB_CPUID_ARCHITECTURE_Pos); -} - -/** - * @brief Get Part number - * @rmtoll SCB_CPUID PARTNO LL_CPUID_GetParNo - * @retval Value should be equal to 0xC24 for Cortex-M4 - */ -__STATIC_INLINE uint32_t LL_CPUID_GetParNo(void) -{ - return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_PARTNO_Msk) >> SCB_CPUID_PARTNO_Pos); -} - -/** - * @brief Get Revision number (The p value in the rnpn product revision identifier, indicates patch release) - * @rmtoll SCB_CPUID REVISION LL_CPUID_GetRevision - * @retval Value between 0 and 255 (0x1: patch 1) - */ -__STATIC_INLINE uint32_t LL_CPUID_GetRevision(void) -{ - return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_REVISION_Msk) >> SCB_CPUID_REVISION_Pos); -} - -/** - * @} - */ - -#if __MPU_PRESENT -/** @defgroup CORTEX_LL_EF_MPU MPU - * @{ - */ - -/** - * @brief Enable MPU with input options - * @rmtoll MPU_CTRL ENABLE LL_MPU_Enable - * @param Options This parameter can be one of the following values: - * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF_NONE - * @arg @ref LL_MPU_CTRL_HARDFAULT_NMI - * @arg @ref LL_MPU_CTRL_PRIVILEGED_DEFAULT - * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF - * @retval None - */ -__STATIC_INLINE void LL_MPU_Enable(uint32_t Options) -{ - /* Enable the MPU*/ - WRITE_REG(MPU->CTRL, (MPU_CTRL_ENABLE_Msk | Options)); - /* Ensure MPU settings take effects */ - __DSB(); - /* Sequence instruction fetches using update settings */ - __ISB(); -} - -/** - * @brief Disable MPU - * @rmtoll MPU_CTRL ENABLE LL_MPU_Disable - * @retval None - */ -__STATIC_INLINE void LL_MPU_Disable(void) -{ - /* Make sure outstanding transfers are done */ - __DMB(); - /* Disable MPU*/ - WRITE_REG(MPU->CTRL, 0U); -} - -/** - * @brief Check if MPU is enabled or not - * @rmtoll MPU_CTRL ENABLE LL_MPU_IsEnabled - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_MPU_IsEnabled(void) -{ - return (READ_BIT(MPU->CTRL, MPU_CTRL_ENABLE_Msk) == (MPU_CTRL_ENABLE_Msk)); -} - -/** - * @brief Enable a MPU region - * @rmtoll MPU_RASR ENABLE LL_MPU_EnableRegion - * @param Region This parameter can be one of the following values: - * @arg @ref LL_MPU_REGION_NUMBER0 - * @arg @ref LL_MPU_REGION_NUMBER1 - * @arg @ref LL_MPU_REGION_NUMBER2 - * @arg @ref LL_MPU_REGION_NUMBER3 - * @arg @ref LL_MPU_REGION_NUMBER4 - * @arg @ref LL_MPU_REGION_NUMBER5 - * @arg @ref LL_MPU_REGION_NUMBER6 - * @arg @ref LL_MPU_REGION_NUMBER7 - * @retval None - */ -__STATIC_INLINE void LL_MPU_EnableRegion(uint32_t Region) -{ - /* Set Region number */ - WRITE_REG(MPU->RNR, Region); - /* Enable the MPU region */ - SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); -} - -/** - * @brief Configure and enable a region - * @rmtoll MPU_RNR REGION LL_MPU_ConfigRegion\n - * MPU_RBAR REGION LL_MPU_ConfigRegion\n - * MPU_RBAR ADDR LL_MPU_ConfigRegion\n - * MPU_RASR XN LL_MPU_ConfigRegion\n - * MPU_RASR AP LL_MPU_ConfigRegion\n - * MPU_RASR S LL_MPU_ConfigRegion\n - * MPU_RASR C LL_MPU_ConfigRegion\n - * MPU_RASR B LL_MPU_ConfigRegion\n - * MPU_RASR SIZE LL_MPU_ConfigRegion - * @param Region This parameter can be one of the following values: - * @arg @ref LL_MPU_REGION_NUMBER0 - * @arg @ref LL_MPU_REGION_NUMBER1 - * @arg @ref LL_MPU_REGION_NUMBER2 - * @arg @ref LL_MPU_REGION_NUMBER3 - * @arg @ref LL_MPU_REGION_NUMBER4 - * @arg @ref LL_MPU_REGION_NUMBER5 - * @arg @ref LL_MPU_REGION_NUMBER6 - * @arg @ref LL_MPU_REGION_NUMBER7 - * @param Address Value of region base address - * @param SubRegionDisable Sub-region disable value between Min_Data = 0x00 and Max_Data = 0xFF - * @param Attributes This parameter can be a combination of the following values: - * @arg @ref LL_MPU_REGION_SIZE_32B or @ref LL_MPU_REGION_SIZE_64B or @ref LL_MPU_REGION_SIZE_128B or @ref LL_MPU_REGION_SIZE_256B or @ref LL_MPU_REGION_SIZE_512B - * or @ref LL_MPU_REGION_SIZE_1KB or @ref LL_MPU_REGION_SIZE_2KB or @ref LL_MPU_REGION_SIZE_4KB or @ref LL_MPU_REGION_SIZE_8KB or @ref LL_MPU_REGION_SIZE_16KB - * or @ref LL_MPU_REGION_SIZE_32KB or @ref LL_MPU_REGION_SIZE_64KB or @ref LL_MPU_REGION_SIZE_128KB or @ref LL_MPU_REGION_SIZE_256KB or @ref LL_MPU_REGION_SIZE_512KB - * or @ref LL_MPU_REGION_SIZE_1MB or @ref LL_MPU_REGION_SIZE_2MB or @ref LL_MPU_REGION_SIZE_4MB or @ref LL_MPU_REGION_SIZE_8MB or @ref LL_MPU_REGION_SIZE_16MB - * or @ref LL_MPU_REGION_SIZE_32MB or @ref LL_MPU_REGION_SIZE_64MB or @ref LL_MPU_REGION_SIZE_128MB or @ref LL_MPU_REGION_SIZE_256MB or @ref LL_MPU_REGION_SIZE_512MB - * or @ref LL_MPU_REGION_SIZE_1GB or @ref LL_MPU_REGION_SIZE_2GB or @ref LL_MPU_REGION_SIZE_4GB - * @arg @ref LL_MPU_REGION_NO_ACCESS or @ref LL_MPU_REGION_PRIV_RW or @ref LL_MPU_REGION_PRIV_RW_URO or @ref LL_MPU_REGION_FULL_ACCESS - * or @ref LL_MPU_REGION_PRIV_RO or @ref LL_MPU_REGION_PRIV_RO_URO - * @arg @ref LL_MPU_TEX_LEVEL0 or @ref LL_MPU_TEX_LEVEL1 or @ref LL_MPU_TEX_LEVEL2 or @ref LL_MPU_TEX_LEVEL4 - * @arg @ref LL_MPU_INSTRUCTION_ACCESS_ENABLE or @ref LL_MPU_INSTRUCTION_ACCESS_DISABLE - * @arg @ref LL_MPU_ACCESS_SHAREABLE or @ref LL_MPU_ACCESS_NOT_SHAREABLE - * @arg @ref LL_MPU_ACCESS_CACHEABLE or @ref LL_MPU_ACCESS_NOT_CACHEABLE - * @arg @ref LL_MPU_ACCESS_BUFFERABLE or @ref LL_MPU_ACCESS_NOT_BUFFERABLE - * @retval None - */ -__STATIC_INLINE void LL_MPU_ConfigRegion(uint32_t Region, uint32_t SubRegionDisable, uint32_t Address, uint32_t Attributes) -{ - /* Set Region number */ - WRITE_REG(MPU->RNR, Region); - /* Set base address */ - WRITE_REG(MPU->RBAR, (Address & 0xFFFFFFE0U)); - /* Configure MPU */ - WRITE_REG(MPU->RASR, (MPU_RASR_ENABLE_Msk | Attributes | SubRegionDisable << MPU_RASR_SRD_Pos)); -} - -/** - * @brief Disable a region - * @rmtoll MPU_RNR REGION LL_MPU_DisableRegion\n - * MPU_RASR ENABLE LL_MPU_DisableRegion - * @param Region This parameter can be one of the following values: - * @arg @ref LL_MPU_REGION_NUMBER0 - * @arg @ref LL_MPU_REGION_NUMBER1 - * @arg @ref LL_MPU_REGION_NUMBER2 - * @arg @ref LL_MPU_REGION_NUMBER3 - * @arg @ref LL_MPU_REGION_NUMBER4 - * @arg @ref LL_MPU_REGION_NUMBER5 - * @arg @ref LL_MPU_REGION_NUMBER6 - * @arg @ref LL_MPU_REGION_NUMBER7 - * @retval None - */ -__STATIC_INLINE void LL_MPU_DisableRegion(uint32_t Region) -{ - /* Set Region number */ - WRITE_REG(MPU->RNR, Region); - /* Disable the MPU region */ - CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); -} - -/** - * @} - */ - -#endif /* __MPU_PRESENT */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_CORTEX_H */ - +/** + ****************************************************************************** + * @file stm32f4xx_ll_cortex.h + * @author MCD Application Team + * @brief Header file of CORTEX LL module. + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL CORTEX driver contains a set of generic APIs that can be + used by user: + (+) SYSTICK configuration used by LL_mDelay and LL_Init1msTick + functions + (+) Low power mode configuration (SCB register of Cortex-MCU) + (+) MPU API to configure and enable regions + (MPU services provided only on some devices) + (+) API to access to MCU info (CPUID register) + (+) API to enable fault handler (SHCSR accesses) + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_LL_CORTEX_H +#define __STM32F4xx_LL_CORTEX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_LL_Driver + * @{ + */ + +/** @defgroup CORTEX_LL CORTEX + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CORTEX_LL_Exported_Constants CORTEX Exported Constants + * @{ + */ + +/** @defgroup CORTEX_LL_EC_CLKSOURCE_HCLK SYSTICK Clock Source + * @{ + */ +#define LL_SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U /*!< AHB clock divided by 8 selected as SysTick clock source.*/ +#define LL_SYSTICK_CLKSOURCE_HCLK SysTick_CTRL_CLKSOURCE_Msk /*!< AHB clock selected as SysTick clock source. */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_FAULT Handler Fault type + * @{ + */ +#define LL_HANDLER_FAULT_USG SCB_SHCSR_USGFAULTENA_Msk /*!< Usage fault */ +#define LL_HANDLER_FAULT_BUS SCB_SHCSR_BUSFAULTENA_Msk /*!< Bus fault */ +#define LL_HANDLER_FAULT_MEM SCB_SHCSR_MEMFAULTENA_Msk /*!< Memory management fault */ +/** + * @} + */ + +#if __MPU_PRESENT + +/** @defgroup CORTEX_LL_EC_CTRL_HFNMI_PRIVDEF MPU Control + * @{ + */ +#define LL_MPU_CTRL_HFNMI_PRIVDEF_NONE 0x00000000U /*!< Disable NMI and privileged SW access */ +#define LL_MPU_CTRL_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk /*!< Enables the operation of MPU during hard fault, NMI, and FAULTMASK handlers */ +#define LL_MPU_CTRL_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk /*!< Enable privileged software access to default memory map */ +#define LL_MPU_CTRL_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) /*!< Enable NMI and privileged SW access */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION MPU Region Number + * @{ + */ +#define LL_MPU_REGION_NUMBER0 0x00U /*!< REGION Number 0 */ +#define LL_MPU_REGION_NUMBER1 0x01U /*!< REGION Number 1 */ +#define LL_MPU_REGION_NUMBER2 0x02U /*!< REGION Number 2 */ +#define LL_MPU_REGION_NUMBER3 0x03U /*!< REGION Number 3 */ +#define LL_MPU_REGION_NUMBER4 0x04U /*!< REGION Number 4 */ +#define LL_MPU_REGION_NUMBER5 0x05U /*!< REGION Number 5 */ +#define LL_MPU_REGION_NUMBER6 0x06U /*!< REGION Number 6 */ +#define LL_MPU_REGION_NUMBER7 0x07U /*!< REGION Number 7 */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION_SIZE MPU Region Size + * @{ + */ +#define LL_MPU_REGION_SIZE_32B (0x04U << MPU_RASR_SIZE_Pos) /*!< 32B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_64B (0x05U << MPU_RASR_SIZE_Pos) /*!< 64B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_128B (0x06U << MPU_RASR_SIZE_Pos) /*!< 128B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_256B (0x07U << MPU_RASR_SIZE_Pos) /*!< 256B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512B (0x08U << MPU_RASR_SIZE_Pos) /*!< 512B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1KB (0x09U << MPU_RASR_SIZE_Pos) /*!< 1KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2KB (0x0AU << MPU_RASR_SIZE_Pos) /*!< 2KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4KB (0x0BU << MPU_RASR_SIZE_Pos) /*!< 4KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_8KB (0x0CU << MPU_RASR_SIZE_Pos) /*!< 8KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_16KB (0x0DU << MPU_RASR_SIZE_Pos) /*!< 16KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_32KB (0x0EU << MPU_RASR_SIZE_Pos) /*!< 32KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_64KB (0x0FU << MPU_RASR_SIZE_Pos) /*!< 64KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_128KB (0x10U << MPU_RASR_SIZE_Pos) /*!< 128KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_256KB (0x11U << MPU_RASR_SIZE_Pos) /*!< 256KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512KB (0x12U << MPU_RASR_SIZE_Pos) /*!< 512KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1MB (0x13U << MPU_RASR_SIZE_Pos) /*!< 1MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2MB (0x14U << MPU_RASR_SIZE_Pos) /*!< 2MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4MB (0x15U << MPU_RASR_SIZE_Pos) /*!< 4MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_8MB (0x16U << MPU_RASR_SIZE_Pos) /*!< 8MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_16MB (0x17U << MPU_RASR_SIZE_Pos) /*!< 16MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_32MB (0x18U << MPU_RASR_SIZE_Pos) /*!< 32MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_64MB (0x19U << MPU_RASR_SIZE_Pos) /*!< 64MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_128MB (0x1AU << MPU_RASR_SIZE_Pos) /*!< 128MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_256MB (0x1BU << MPU_RASR_SIZE_Pos) /*!< 256MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512MB (0x1CU << MPU_RASR_SIZE_Pos) /*!< 512MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1GB (0x1DU << MPU_RASR_SIZE_Pos) /*!< 1GB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2GB (0x1EU << MPU_RASR_SIZE_Pos) /*!< 2GB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4GB (0x1FU << MPU_RASR_SIZE_Pos) /*!< 4GB Size of the MPU protection region */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION_PRIVILEDGES MPU Region Privileges + * @{ + */ +#define LL_MPU_REGION_NO_ACCESS (0x00U << MPU_RASR_AP_Pos) /*!< No access*/ +#define LL_MPU_REGION_PRIV_RW (0x01U << MPU_RASR_AP_Pos) /*!< RW privileged (privileged access only)*/ +#define LL_MPU_REGION_PRIV_RW_URO (0x02U << MPU_RASR_AP_Pos) /*!< RW privileged - RO user (Write in a user program generates a fault) */ +#define LL_MPU_REGION_FULL_ACCESS (0x03U << MPU_RASR_AP_Pos) /*!< RW privileged & user (Full access) */ +#define LL_MPU_REGION_PRIV_RO (0x05U << MPU_RASR_AP_Pos) /*!< RO privileged (privileged read only)*/ +#define LL_MPU_REGION_PRIV_RO_URO (0x06U << MPU_RASR_AP_Pos) /*!< RO privileged & user (read only) */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_TEX MPU TEX Level + * @{ + */ +#define LL_MPU_TEX_LEVEL0 (0x00U << MPU_RASR_TEX_Pos) /*!< b000 for TEX bits */ +#define LL_MPU_TEX_LEVEL1 (0x01U << MPU_RASR_TEX_Pos) /*!< b001 for TEX bits */ +#define LL_MPU_TEX_LEVEL2 (0x02U << MPU_RASR_TEX_Pos) /*!< b010 for TEX bits */ +#define LL_MPU_TEX_LEVEL4 (0x04U << MPU_RASR_TEX_Pos) /*!< b100 for TEX bits */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_INSTRUCTION_ACCESS MPU Instruction Access + * @{ + */ +#define LL_MPU_INSTRUCTION_ACCESS_ENABLE 0x00U /*!< Instruction fetches enabled */ +#define LL_MPU_INSTRUCTION_ACCESS_DISABLE MPU_RASR_XN_Msk /*!< Instruction fetches disabled*/ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_SHAREABLE_ACCESS MPU Shareable Access + * @{ + */ +#define LL_MPU_ACCESS_SHAREABLE MPU_RASR_S_Msk /*!< Shareable memory attribute */ +#define LL_MPU_ACCESS_NOT_SHAREABLE 0x00U /*!< Not Shareable memory attribute */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_CACHEABLE_ACCESS MPU Cacheable Access + * @{ + */ +#define LL_MPU_ACCESS_CACHEABLE MPU_RASR_C_Msk /*!< Cacheable memory attribute */ +#define LL_MPU_ACCESS_NOT_CACHEABLE 0x00U /*!< Not Cacheable memory attribute */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_BUFFERABLE_ACCESS MPU Bufferable Access + * @{ + */ +#define LL_MPU_ACCESS_BUFFERABLE MPU_RASR_B_Msk /*!< Bufferable memory attribute */ +#define LL_MPU_ACCESS_NOT_BUFFERABLE 0x00U /*!< Not Bufferable memory attribute */ +/** + * @} + */ +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CORTEX_LL_Exported_Functions CORTEX Exported Functions + * @{ + */ + +/** @defgroup CORTEX_LL_EF_SYSTICK SYSTICK + * @{ + */ + +/** + * @brief This function checks if the Systick counter flag is active or not. + * @note It can be used in timeout function on application side. + * @rmtoll STK_CTRL COUNTFLAG LL_SYSTICK_IsActiveCounterFlag + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void) +{ + return ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk)); +} + +/** + * @brief Configures the SysTick clock source + * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_SetClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8 + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_SetClkSource(uint32_t Source) +{ + if (Source == LL_SYSTICK_CLKSOURCE_HCLK) + { + SET_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); + } + else + { + CLEAR_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); + } +} + +/** + * @brief Get the SysTick clock source + * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_GetClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8 + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK + */ +__STATIC_INLINE uint32_t LL_SYSTICK_GetClkSource(void) +{ + return READ_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); +} + +/** + * @brief Enable SysTick exception request + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_EnableIT + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_EnableIT(void) +{ + SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Disable SysTick exception request + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_DisableIT + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_DisableIT(void) +{ + CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Checks if the SYSTICK interrupt is enabled or disabled. + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_IsEnabledIT + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSTICK_IsEnabledIT(void) +{ + return (READ_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk) == (SysTick_CTRL_TICKINT_Msk)); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_LOW_POWER_MODE LOW POWER MODE + * @{ + */ + +/** + * @brief Processor uses sleep as its low power mode + * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableSleep + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableSleep(void) +{ + /* Clear SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + +/** + * @brief Processor uses deep sleep as its low power mode + * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableDeepSleep + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableDeepSleep(void) +{ + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + +/** + * @brief Configures sleep-on-exit when returning from Handler mode to Thread mode. + * @note Setting this bit to 1 enables an interrupt-driven application to avoid returning to an + * empty main application. + * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_EnableSleepOnExit + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableSleepOnExit(void) +{ + /* Set SLEEPONEXIT bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + +/** + * @brief Do not sleep when returning to Thread mode. + * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_DisableSleepOnExit + * @retval None + */ +__STATIC_INLINE void LL_LPM_DisableSleepOnExit(void) +{ + /* Clear SLEEPONEXIT bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + +/** + * @brief Enabled events and all interrupts, including disabled interrupts, can wakeup the + * processor. + * @rmtoll SCB_SCR SEVEONPEND LL_LPM_EnableEventOnPend + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableEventOnPend(void) +{ + /* Set SEVEONPEND bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + +/** + * @brief Only enabled interrupts or events can wakeup the processor, disabled interrupts are + * excluded + * @rmtoll SCB_SCR SEVEONPEND LL_LPM_DisableEventOnPend + * @retval None + */ +__STATIC_INLINE void LL_LPM_DisableEventOnPend(void) +{ + /* Clear SEVEONPEND bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_HANDLER HANDLER + * @{ + */ + +/** + * @brief Enable a fault in System handler control register (SHCSR) + * @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_EnableFault + * @param Fault This parameter can be a combination of the following values: + * @arg @ref LL_HANDLER_FAULT_USG + * @arg @ref LL_HANDLER_FAULT_BUS + * @arg @ref LL_HANDLER_FAULT_MEM + * @retval None + */ +__STATIC_INLINE void LL_HANDLER_EnableFault(uint32_t Fault) +{ + /* Enable the system handler fault */ + SET_BIT(SCB->SHCSR, Fault); +} + +/** + * @brief Disable a fault in System handler control register (SHCSR) + * @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_DisableFault + * @param Fault This parameter can be a combination of the following values: + * @arg @ref LL_HANDLER_FAULT_USG + * @arg @ref LL_HANDLER_FAULT_BUS + * @arg @ref LL_HANDLER_FAULT_MEM + * @retval None + */ +__STATIC_INLINE void LL_HANDLER_DisableFault(uint32_t Fault) +{ + /* Disable the system handler fault */ + CLEAR_BIT(SCB->SHCSR, Fault); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_MCU_INFO MCU INFO + * @{ + */ + +/** + * @brief Get Implementer code + * @rmtoll SCB_CPUID IMPLEMENTER LL_CPUID_GetImplementer + * @retval Value should be equal to 0x41 for ARM + */ +__STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_IMPLEMENTER_Msk) >> SCB_CPUID_IMPLEMENTER_Pos); +} + +/** + * @brief Get Variant number (The r value in the rnpn product revision identifier) + * @rmtoll SCB_CPUID VARIANT LL_CPUID_GetVariant + * @retval Value between 0 and 255 (0x0: revision 0) + */ +__STATIC_INLINE uint32_t LL_CPUID_GetVariant(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_VARIANT_Msk) >> SCB_CPUID_VARIANT_Pos); +} + +/** + * @brief Get Constant number + * @rmtoll SCB_CPUID ARCHITECTURE LL_CPUID_GetConstant + * @retval Value should be equal to 0xF for Cortex-M4 devices + */ +__STATIC_INLINE uint32_t LL_CPUID_GetConstant(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_ARCHITECTURE_Msk) >> SCB_CPUID_ARCHITECTURE_Pos); +} + +/** + * @brief Get Part number + * @rmtoll SCB_CPUID PARTNO LL_CPUID_GetParNo + * @retval Value should be equal to 0xC24 for Cortex-M4 + */ +__STATIC_INLINE uint32_t LL_CPUID_GetParNo(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_PARTNO_Msk) >> SCB_CPUID_PARTNO_Pos); +} + +/** + * @brief Get Revision number (The p value in the rnpn product revision identifier, indicates patch release) + * @rmtoll SCB_CPUID REVISION LL_CPUID_GetRevision + * @retval Value between 0 and 255 (0x1: patch 1) + */ +__STATIC_INLINE uint32_t LL_CPUID_GetRevision(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_REVISION_Msk) >> SCB_CPUID_REVISION_Pos); +} + +/** + * @} + */ + +#if __MPU_PRESENT +/** @defgroup CORTEX_LL_EF_MPU MPU + * @{ + */ + +/** + * @brief Enable MPU with input options + * @rmtoll MPU_CTRL ENABLE LL_MPU_Enable + * @param Options This parameter can be one of the following values: + * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF_NONE + * @arg @ref LL_MPU_CTRL_HARDFAULT_NMI + * @arg @ref LL_MPU_CTRL_PRIVILEGED_DEFAULT + * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF + * @retval None + */ +__STATIC_INLINE void LL_MPU_Enable(uint32_t Options) +{ + /* Enable the MPU*/ + WRITE_REG(MPU->CTRL, (MPU_CTRL_ENABLE_Msk | Options)); + /* Ensure MPU settings take effects */ + __DSB(); + /* Sequence instruction fetches using update settings */ + __ISB(); +} + +/** + * @brief Disable MPU + * @rmtoll MPU_CTRL ENABLE LL_MPU_Disable + * @retval None + */ +__STATIC_INLINE void LL_MPU_Disable(void) +{ + /* Make sure outstanding transfers are done */ + __DMB(); + /* Disable MPU*/ + WRITE_REG(MPU->CTRL, 0U); +} + +/** + * @brief Check if MPU is enabled or not + * @rmtoll MPU_CTRL ENABLE LL_MPU_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_MPU_IsEnabled(void) +{ + return (READ_BIT(MPU->CTRL, MPU_CTRL_ENABLE_Msk) == (MPU_CTRL_ENABLE_Msk)); +} + +/** + * @brief Enable a MPU region + * @rmtoll MPU_RASR ENABLE LL_MPU_EnableRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @retval None + */ +__STATIC_INLINE void LL_MPU_EnableRegion(uint32_t Region) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + /* Enable the MPU region */ + SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @brief Configure and enable a region + * @rmtoll MPU_RNR REGION LL_MPU_ConfigRegion\n + * MPU_RBAR REGION LL_MPU_ConfigRegion\n + * MPU_RBAR ADDR LL_MPU_ConfigRegion\n + * MPU_RASR XN LL_MPU_ConfigRegion\n + * MPU_RASR AP LL_MPU_ConfigRegion\n + * MPU_RASR S LL_MPU_ConfigRegion\n + * MPU_RASR C LL_MPU_ConfigRegion\n + * MPU_RASR B LL_MPU_ConfigRegion\n + * MPU_RASR SIZE LL_MPU_ConfigRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @param Address Value of region base address + * @param SubRegionDisable Sub-region disable value between Min_Data = 0x00 and Max_Data = 0xFF + * @param Attributes This parameter can be a combination of the following values: + * @arg @ref LL_MPU_REGION_SIZE_32B or @ref LL_MPU_REGION_SIZE_64B or @ref LL_MPU_REGION_SIZE_128B or @ref LL_MPU_REGION_SIZE_256B or @ref LL_MPU_REGION_SIZE_512B + * or @ref LL_MPU_REGION_SIZE_1KB or @ref LL_MPU_REGION_SIZE_2KB or @ref LL_MPU_REGION_SIZE_4KB or @ref LL_MPU_REGION_SIZE_8KB or @ref LL_MPU_REGION_SIZE_16KB + * or @ref LL_MPU_REGION_SIZE_32KB or @ref LL_MPU_REGION_SIZE_64KB or @ref LL_MPU_REGION_SIZE_128KB or @ref LL_MPU_REGION_SIZE_256KB or @ref LL_MPU_REGION_SIZE_512KB + * or @ref LL_MPU_REGION_SIZE_1MB or @ref LL_MPU_REGION_SIZE_2MB or @ref LL_MPU_REGION_SIZE_4MB or @ref LL_MPU_REGION_SIZE_8MB or @ref LL_MPU_REGION_SIZE_16MB + * or @ref LL_MPU_REGION_SIZE_32MB or @ref LL_MPU_REGION_SIZE_64MB or @ref LL_MPU_REGION_SIZE_128MB or @ref LL_MPU_REGION_SIZE_256MB or @ref LL_MPU_REGION_SIZE_512MB + * or @ref LL_MPU_REGION_SIZE_1GB or @ref LL_MPU_REGION_SIZE_2GB or @ref LL_MPU_REGION_SIZE_4GB + * @arg @ref LL_MPU_REGION_NO_ACCESS or @ref LL_MPU_REGION_PRIV_RW or @ref LL_MPU_REGION_PRIV_RW_URO or @ref LL_MPU_REGION_FULL_ACCESS + * or @ref LL_MPU_REGION_PRIV_RO or @ref LL_MPU_REGION_PRIV_RO_URO + * @arg @ref LL_MPU_TEX_LEVEL0 or @ref LL_MPU_TEX_LEVEL1 or @ref LL_MPU_TEX_LEVEL2 or @ref LL_MPU_TEX_LEVEL4 + * @arg @ref LL_MPU_INSTRUCTION_ACCESS_ENABLE or @ref LL_MPU_INSTRUCTION_ACCESS_DISABLE + * @arg @ref LL_MPU_ACCESS_SHAREABLE or @ref LL_MPU_ACCESS_NOT_SHAREABLE + * @arg @ref LL_MPU_ACCESS_CACHEABLE or @ref LL_MPU_ACCESS_NOT_CACHEABLE + * @arg @ref LL_MPU_ACCESS_BUFFERABLE or @ref LL_MPU_ACCESS_NOT_BUFFERABLE + * @retval None + */ +__STATIC_INLINE void LL_MPU_ConfigRegion(uint32_t Region, uint32_t SubRegionDisable, uint32_t Address, uint32_t Attributes) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + /* Set base address */ + WRITE_REG(MPU->RBAR, (Address & 0xFFFFFFE0U)); + /* Configure MPU */ + WRITE_REG(MPU->RASR, (MPU_RASR_ENABLE_Msk | Attributes | SubRegionDisable << MPU_RASR_SRD_Pos)); +} + +/** + * @brief Disable a region + * @rmtoll MPU_RNR REGION LL_MPU_DisableRegion\n + * MPU_RASR ENABLE LL_MPU_DisableRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @retval None + */ +__STATIC_INLINE void LL_MPU_DisableRegion(uint32_t Region) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + /* Disable the MPU region */ + CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @} + */ + +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_LL_CORTEX_H */ + diff --git a/Drivers/stm32f4xx_ll_dac.h b/libs/hal/stm32f4xx_ll_dac.h similarity index 97% rename from Drivers/stm32f4xx_ll_dac.h rename to libs/hal/stm32f4xx_ll_dac.h index 870aea3..ea1500b 100644 --- a/Drivers/stm32f4xx_ll_dac.h +++ b/libs/hal/stm32f4xx_ll_dac.h @@ -1,1455 +1,1455 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_dac.h - * @author MCD Application Team - * @brief Header file of DAC LL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_LL_DAC_H -#define STM32F4xx_LL_DAC_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined(DAC) - -/** @defgroup DAC_LL DAC - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup DAC_LL_Private_Constants DAC Private Constants - * @{ - */ - -/* Internal masks for DAC channels definition */ -/* To select into literal LL_DAC_CHANNEL_x the relevant bits for: */ -/* - channel bits position into registers CR, MCR, CCR, SHHR, SHRR */ -/* - channel bits position into register SWTRIG */ -/* - channel register offset of data holding register DHRx */ -/* - channel register offset of data output register DORx */ -#define DAC_CR_CH1_BITOFFSET 0UL /* Position of channel bits into registers - CR, MCR, CCR, SHHR, SHRR of channel 1 */ -#if defined(DAC_CHANNEL2_SUPPORT) -#define DAC_CR_CH2_BITOFFSET 16UL /* Position of channel bits into registers - CR, MCR, CCR, SHHR, SHRR of channel 2 */ -#define DAC_CR_CHX_BITOFFSET_MASK (DAC_CR_CH1_BITOFFSET | DAC_CR_CH2_BITOFFSET) -#else -#define DAC_CR_CHX_BITOFFSET_MASK (DAC_CR_CH1_BITOFFSET) -#endif /* DAC_CHANNEL2_SUPPORT */ - -#define DAC_SWTR_CH1 (DAC_SWTRIGR_SWTRIG1) /* Channel bit into register SWTRIGR of channel 1. */ -#if defined(DAC_CHANNEL2_SUPPORT) -#define DAC_SWTR_CH2 (DAC_SWTRIGR_SWTRIG2) /* Channel bit into register SWTRIGR of channel 2. */ -#define DAC_SWTR_CHX_MASK (DAC_SWTR_CH1 | DAC_SWTR_CH2) -#else -#define DAC_SWTR_CHX_MASK (DAC_SWTR_CH1) -#endif /* DAC_CHANNEL2_SUPPORT */ - -#define DAC_REG_DHR12R1_REGOFFSET 0x00000000UL /* Register DHR12Rx channel 1 taken as reference */ -#define DAC_REG_DHR12L1_REGOFFSET 0x00100000UL /* Register offset of DHR12Lx channel 1 versus - DHR12Rx channel 1 (shifted left of 20 bits) */ -#define DAC_REG_DHR8R1_REGOFFSET 0x02000000UL /* Register offset of DHR8Rx channel 1 versus - DHR12Rx channel 1 (shifted left of 24 bits) */ -#if defined(DAC_CHANNEL2_SUPPORT) -#define DAC_REG_DHR12R2_REGOFFSET 0x00030000UL /* Register offset of DHR12Rx channel 2 versus - DHR12Rx channel 1 (shifted left of 16 bits) */ -#define DAC_REG_DHR12L2_REGOFFSET 0x00400000UL /* Register offset of DHR12Lx channel 2 versus - DHR12Rx channel 1 (shifted left of 20 bits) */ -#define DAC_REG_DHR8R2_REGOFFSET 0x05000000UL /* Register offset of DHR8Rx channel 2 versus - DHR12Rx channel 1 (shifted left of 24 bits) */ -#endif /* DAC_CHANNEL2_SUPPORT */ -#define DAC_REG_DHR12RX_REGOFFSET_MASK 0x000F0000UL -#define DAC_REG_DHR12LX_REGOFFSET_MASK 0x00F00000UL -#define DAC_REG_DHR8RX_REGOFFSET_MASK 0x0F000000UL -#define DAC_REG_DHRX_REGOFFSET_MASK (DAC_REG_DHR12RX_REGOFFSET_MASK\ - | DAC_REG_DHR12LX_REGOFFSET_MASK | DAC_REG_DHR8RX_REGOFFSET_MASK) - -#define DAC_REG_DOR1_REGOFFSET 0x00000000UL /* Register DORx channel 1 taken as reference */ -#if defined(DAC_CHANNEL2_SUPPORT) -#define DAC_REG_DOR2_REGOFFSET 0x10000000UL /* Register offset of DORx channel 1 versus - DORx channel 2 (shifted left of 28 bits) */ -#define DAC_REG_DORX_REGOFFSET_MASK (DAC_REG_DOR1_REGOFFSET | DAC_REG_DOR2_REGOFFSET) -#endif /* DAC_CHANNEL2_SUPPORT */ - - -#define DAC_REG_DHR_REGOFFSET_MASK_POSBIT0 0x0000000FUL /* Mask of data hold registers offset (DHR12Rx, - DHR12Lx, DHR8Rx, ...) when shifted to position 0 */ -#define DAC_REG_DORX_REGOFFSET_MASK_POSBIT0 0x00000001UL /* Mask of DORx registers offset when shifted - to position 0 */ -#define DAC_REG_SHSRX_REGOFFSET_MASK_POSBIT0 0x00000001UL /* Mask of SHSRx registers offset when shifted - to position 0 */ - -#define DAC_REG_DHR12RX_REGOFFSET_BITOFFSET_POS 16UL /* Position of bits register offset of DHR12Rx - channel 1 or 2 versus DHR12Rx channel 1 - (shifted left of 16 bits) */ -#define DAC_REG_DHR12LX_REGOFFSET_BITOFFSET_POS 20UL /* Position of bits register offset of DHR12Lx - channel 1 or 2 versus DHR12Rx channel 1 - (shifted left of 20 bits) */ -#define DAC_REG_DHR8RX_REGOFFSET_BITOFFSET_POS 24UL /* Position of bits register offset of DHR8Rx - channel 1 or 2 versus DHR12Rx channel 1 - (shifted left of 24 bits) */ -#define DAC_REG_DORX_REGOFFSET_BITOFFSET_POS 28UL /* Position of bits register offset of DORx - channel 1 or 2 versus DORx channel 1 - (shifted left of 28 bits) */ - -/* DAC registers bits positions */ -#if defined(DAC_CHANNEL2_SUPPORT) -#endif -#define DAC_DHR12RD_DACC2DHR_BITOFFSET_POS DAC_DHR12RD_DACC2DHR_Pos -#define DAC_DHR12LD_DACC2DHR_BITOFFSET_POS DAC_DHR12LD_DACC2DHR_Pos -#define DAC_DHR8RD_DACC2DHR_BITOFFSET_POS DAC_DHR8RD_DACC2DHR_Pos - -/* Miscellaneous data */ -#define DAC_DIGITAL_SCALE_12BITS 4095UL /* Full-scale digital value with a resolution of 12 - bits (voltage range determined by analog voltage - references Vref+ and Vref-, refer to reference manual) */ - -/** - * @} - */ - - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup DAC_LL_Private_Macros DAC Private Macros - * @{ - */ - -/** - * @brief Driver macro reserved for internal use: set a pointer to - * a register from a register basis from which an offset - * is applied. - * @param __REG__ Register basis from which the offset is applied. - * @param __REG_OFFFSET__ Offset to be applied (unit: number of registers). - * @retval Pointer to register address - */ -#define __DAC_PTR_REG_OFFSET(__REG__, __REG_OFFFSET__) \ - ((uint32_t *)((uint32_t) ((uint32_t)(&(__REG__)) + ((__REG_OFFFSET__) << 2UL)))) - -/** - * @} - */ - - -/* Exported types ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup DAC_LL_ES_INIT DAC Exported Init structure - * @{ - */ - -/** - * @brief Structure definition of some features of DAC instance. - */ -typedef struct -{ - uint32_t TriggerSource; /*!< Set the conversion trigger source for the selected DAC channel: - internal (SW start) or from external peripheral - (timer event, external interrupt line). - This parameter can be a value of @ref DAC_LL_EC_TRIGGER_SOURCE - - This feature can be modified afterwards using unitary - function @ref LL_DAC_SetTriggerSource(). */ - - uint32_t WaveAutoGeneration; /*!< Set the waveform automatic generation mode for the selected DAC channel. - This parameter can be a value of @ref DAC_LL_EC_WAVE_AUTO_GENERATION_MODE - - This feature can be modified afterwards using unitary - function @ref LL_DAC_SetWaveAutoGeneration(). */ - - uint32_t WaveAutoGenerationConfig; /*!< Set the waveform automatic generation mode for the selected DAC channel. - If waveform automatic generation mode is set to noise, this parameter - can be a value of @ref DAC_LL_EC_WAVE_NOISE_LFSR_UNMASK_BITS - If waveform automatic generation mode is set to triangle, - this parameter can be a value of @ref DAC_LL_EC_WAVE_TRIANGLE_AMPLITUDE - @note If waveform automatic generation mode is disabled, - this parameter is discarded. - - This feature can be modified afterwards using unitary - function @ref LL_DAC_SetWaveNoiseLFSR(), - @ref LL_DAC_SetWaveTriangleAmplitude() - depending on the wave automatic generation selected. */ - - uint32_t OutputBuffer; /*!< Set the output buffer for the selected DAC channel. - This parameter can be a value of @ref DAC_LL_EC_OUTPUT_BUFFER - - This feature can be modified afterwards using unitary - function @ref LL_DAC_SetOutputBuffer(). */ -} LL_DAC_InitTypeDef; - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup DAC_LL_Exported_Constants DAC Exported Constants - * @{ - */ - -/** @defgroup DAC_LL_EC_GET_FLAG DAC flags - * @brief Flags defines which can be used with LL_DAC_ReadReg function - * @{ - */ -/* DAC channel 1 flags */ -#define LL_DAC_FLAG_DMAUDR1 (DAC_SR_DMAUDR1) /*!< DAC channel 1 flag DMA underrun */ -#if defined(DAC_CHANNEL2_SUPPORT) -/* DAC channel 2 flags */ -#define LL_DAC_FLAG_DMAUDR2 (DAC_SR_DMAUDR2) /*!< DAC channel 2 flag DMA underrun */ -#endif /* DAC_CHANNEL2_SUPPORT */ -/** - * @} - */ - -/** @defgroup DAC_LL_EC_IT DAC interruptions - * @brief IT defines which can be used with LL_DAC_ReadReg and LL_DAC_WriteReg functions - * @{ - */ -#define LL_DAC_IT_DMAUDRIE1 (DAC_CR_DMAUDRIE1) /*!< DAC channel 1 interruption DMA underrun */ -#if defined(DAC_CHANNEL2_SUPPORT) -#define LL_DAC_IT_DMAUDRIE2 (DAC_CR_DMAUDRIE2) /*!< DAC channel 2 interruption DMA underrun */ -#endif /* DAC_CHANNEL2_SUPPORT */ -/** - * @} - */ - -/** @defgroup DAC_LL_EC_CHANNEL DAC channels - * @{ - */ -#define LL_DAC_CHANNEL_1 (DAC_REG_DOR1_REGOFFSET | DAC_REG_DHR12R1_REGOFFSET | DAC_REG_DHR12L1_REGOFFSET | DAC_REG_DHR8R1_REGOFFSET | DAC_CR_CH1_BITOFFSET | DAC_SWTR_CH1) /*!< DAC channel 1 */ -#if defined(DAC_CHANNEL2_SUPPORT) -#define LL_DAC_CHANNEL_2 (DAC_REG_DOR2_REGOFFSET | DAC_REG_DHR12R2_REGOFFSET | DAC_REG_DHR12L2_REGOFFSET | DAC_REG_DHR8R2_REGOFFSET | DAC_CR_CH2_BITOFFSET | DAC_SWTR_CH2) /*!< DAC channel 2 */ -#endif /* DAC_CHANNEL2_SUPPORT */ -/** - * @} - */ - -/** @defgroup DAC_LL_EC_TRIGGER_SOURCE DAC trigger source - * @{ - */ -#define LL_DAC_TRIG_SOFTWARE (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger internal (SW start) */ -#define LL_DAC_TRIG_EXT_TIM2_TRGO (DAC_CR_TSEL1_2 ) /*!< DAC channel conversion trigger from external peripheral: TIM2 TRGO. */ -#define LL_DAC_TRIG_EXT_TIM8_TRGO ( DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external peripheral: TIM8 TRGO. */ -#define LL_DAC_TRIG_EXT_TIM4_TRGO (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external peripheral: TIM4 TRGO. */ -#define LL_DAC_TRIG_EXT_TIM6_TRGO 0x00000000UL /*!< DAC channel conversion trigger from external peripheral: TIM6 TRGO. */ -#define LL_DAC_TRIG_EXT_TIM7_TRGO ( DAC_CR_TSEL1_1 ) /*!< DAC channel conversion trigger from external peripheral: TIM7 TRGO. */ -#define LL_DAC_TRIG_EXT_TIM5_TRGO ( DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external peripheral: TIM5 TRGO. */ -#define LL_DAC_TRIG_EXT_EXTI_LINE9 (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 ) /*!< DAC channel conversion trigger from external peripheral: external interrupt line 9. */ -/** - * @} - */ - -/** @defgroup DAC_LL_EC_WAVE_AUTO_GENERATION_MODE DAC waveform automatic generation mode - * @{ - */ -#define LL_DAC_WAVE_AUTO_GENERATION_NONE 0x00000000UL /*!< DAC channel wave auto generation mode disabled. */ -#define LL_DAC_WAVE_AUTO_GENERATION_NOISE ( DAC_CR_WAVE1_0) /*!< DAC channel wave auto generation mode enabled, set generated noise waveform. */ -#define LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE (DAC_CR_WAVE1_1 ) /*!< DAC channel wave auto generation mode enabled, set generated triangle waveform. */ -/** - * @} - */ - -/** @defgroup DAC_LL_EC_WAVE_NOISE_LFSR_UNMASK_BITS DAC wave generation - Noise LFSR unmask bits - * @{ - */ -#define LL_DAC_NOISE_LFSR_UNMASK_BIT0 0x00000000UL /*!< Noise wave generation, unmask LFSR bit0, for the selected DAC channel */ -#define LL_DAC_NOISE_LFSR_UNMASK_BITS1_0 ( DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[1:0], for the selected DAC channel */ -#define LL_DAC_NOISE_LFSR_UNMASK_BITS2_0 ( DAC_CR_MAMP1_1 ) /*!< Noise wave generation, unmask LFSR bits[2:0], for the selected DAC channel */ -#define LL_DAC_NOISE_LFSR_UNMASK_BITS3_0 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[3:0], for the selected DAC channel */ -#define LL_DAC_NOISE_LFSR_UNMASK_BITS4_0 ( DAC_CR_MAMP1_2 ) /*!< Noise wave generation, unmask LFSR bits[4:0], for the selected DAC channel */ -#define LL_DAC_NOISE_LFSR_UNMASK_BITS5_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[5:0], for the selected DAC channel */ -#define LL_DAC_NOISE_LFSR_UNMASK_BITS6_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 ) /*!< Noise wave generation, unmask LFSR bits[6:0], for the selected DAC channel */ -#define LL_DAC_NOISE_LFSR_UNMASK_BITS7_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[7:0], for the selected DAC channel */ -#define LL_DAC_NOISE_LFSR_UNMASK_BITS8_0 (DAC_CR_MAMP1_3 ) /*!< Noise wave generation, unmask LFSR bits[8:0], for the selected DAC channel */ -#define LL_DAC_NOISE_LFSR_UNMASK_BITS9_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[9:0], for the selected DAC channel */ -#define LL_DAC_NOISE_LFSR_UNMASK_BITS10_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 ) /*!< Noise wave generation, unmask LFSR bits[10:0], for the selected DAC channel */ -#define LL_DAC_NOISE_LFSR_UNMASK_BITS11_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[11:0], for the selected DAC channel */ -/** - * @} - */ - -/** @defgroup DAC_LL_EC_WAVE_TRIANGLE_AMPLITUDE DAC wave generation - Triangle amplitude - * @{ - */ -#define LL_DAC_TRIANGLE_AMPLITUDE_1 0x00000000UL /*!< Triangle wave generation, amplitude of 1 LSB of DAC output range, for the selected DAC channel */ -#define LL_DAC_TRIANGLE_AMPLITUDE_3 ( DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 3 LSB of DAC output range, for the selected DAC channel */ -#define LL_DAC_TRIANGLE_AMPLITUDE_7 ( DAC_CR_MAMP1_1 ) /*!< Triangle wave generation, amplitude of 7 LSB of DAC output range, for the selected DAC channel */ -#define LL_DAC_TRIANGLE_AMPLITUDE_15 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 15 LSB of DAC output range, for the selected DAC channel */ -#define LL_DAC_TRIANGLE_AMPLITUDE_31 ( DAC_CR_MAMP1_2 ) /*!< Triangle wave generation, amplitude of 31 LSB of DAC output range, for the selected DAC channel */ -#define LL_DAC_TRIANGLE_AMPLITUDE_63 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 63 LSB of DAC output range, for the selected DAC channel */ -#define LL_DAC_TRIANGLE_AMPLITUDE_127 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 ) /*!< Triangle wave generation, amplitude of 127 LSB of DAC output range, for the selected DAC channel */ -#define LL_DAC_TRIANGLE_AMPLITUDE_255 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 255 LSB of DAC output range, for the selected DAC channel */ -#define LL_DAC_TRIANGLE_AMPLITUDE_511 (DAC_CR_MAMP1_3 ) /*!< Triangle wave generation, amplitude of 512 LSB of DAC output range, for the selected DAC channel */ -#define LL_DAC_TRIANGLE_AMPLITUDE_1023 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 1023 LSB of DAC output range, for the selected DAC channel */ -#define LL_DAC_TRIANGLE_AMPLITUDE_2047 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 ) /*!< Triangle wave generation, amplitude of 2047 LSB of DAC output range, for the selected DAC channel */ -#define LL_DAC_TRIANGLE_AMPLITUDE_4095 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 4095 LSB of DAC output range, for the selected DAC channel */ -/** - * @} - */ - -/** @defgroup DAC_LL_EC_OUTPUT_BUFFER DAC channel output buffer - * @{ - */ -#define LL_DAC_OUTPUT_BUFFER_ENABLE 0x00000000UL /*!< The selected DAC channel output is buffered: higher drive current capability, but also higher current consumption */ -#define LL_DAC_OUTPUT_BUFFER_DISABLE (DAC_CR_BOFF1) /*!< The selected DAC channel output is not buffered: lower drive current capability, but also lower current consumption */ -/** - * @} - */ - -/** @defgroup DAC_LL_EC_RESOLUTION DAC channel output resolution - * @{ - */ -#define LL_DAC_RESOLUTION_12B 0x00000000UL /*!< DAC channel resolution 12 bits */ -#define LL_DAC_RESOLUTION_8B 0x00000002UL /*!< DAC channel resolution 8 bits */ -/** - * @} - */ - -/** @defgroup DAC_LL_EC_REGISTERS DAC registers compliant with specific purpose - * @{ - */ -/* List of DAC registers intended to be used (most commonly) with */ -/* DMA transfer. */ -/* Refer to function @ref LL_DAC_DMA_GetRegAddr(). */ -#define LL_DAC_DMA_REG_DATA_12BITS_RIGHT_ALIGNED DAC_REG_DHR12RX_REGOFFSET_BITOFFSET_POS /*!< DAC channel data holding register 12 bits right aligned */ -#define LL_DAC_DMA_REG_DATA_12BITS_LEFT_ALIGNED DAC_REG_DHR12LX_REGOFFSET_BITOFFSET_POS /*!< DAC channel data holding register 12 bits left aligned */ -#define LL_DAC_DMA_REG_DATA_8BITS_RIGHT_ALIGNED DAC_REG_DHR8RX_REGOFFSET_BITOFFSET_POS /*!< DAC channel data holding register 8 bits right aligned */ -/** - * @} - */ - -/** @defgroup DAC_LL_EC_HW_DELAYS Definitions of DAC hardware constraints delays - * @note Only DAC peripheral HW delays are defined in DAC LL driver driver, - * not timeout values. - * For details on delays values, refer to descriptions in source code - * above each literal definition. - * @{ - */ - -/* Delay for DAC channel voltage settling time from DAC channel startup */ -/* (transition from disable to enable). */ -/* Note: DAC channel startup time depends on board application environment: */ -/* impedance connected to DAC channel output. */ -/* The delay below is specified under conditions: */ -/* - voltage maximum transition (lowest to highest value) */ -/* - until voltage reaches final value +-1LSB */ -/* - DAC channel output buffer enabled */ -/* - load impedance of 5kOhm (min), 50pF (max) */ -/* Literal set to maximum value (refer to device datasheet, */ -/* parameter "tWAKEUP"). */ -/* Unit: us */ -#define LL_DAC_DELAY_STARTUP_VOLTAGE_SETTLING_US 15UL /*!< Delay for DAC channel voltage settling time from DAC channel startup (transition from disable to enable) */ - -/* Delay for DAC channel voltage settling time. */ -/* Note: DAC channel startup time depends on board application environment: */ -/* impedance connected to DAC channel output. */ -/* The delay below is specified under conditions: */ -/* - voltage maximum transition (lowest to highest value) */ -/* - until voltage reaches final value +-1LSB */ -/* - DAC channel output buffer enabled */ -/* - load impedance of 5kOhm min, 50pF max */ -/* Literal set to maximum value (refer to device datasheet, */ -/* parameter "tSETTLING"). */ -/* Unit: us */ -#define LL_DAC_DELAY_VOLTAGE_SETTLING_US 12UL /*!< Delay for DAC channel voltage settling time */ - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup DAC_LL_Exported_Macros DAC Exported Macros - * @{ - */ - -/** @defgroup DAC_LL_EM_WRITE_READ Common write and read registers macros - * @{ - */ - -/** - * @brief Write a value in DAC register - * @param __INSTANCE__ DAC Instance - * @param __REG__ Register to be written - * @param __VALUE__ Value to be written in the register - * @retval None - */ -#define LL_DAC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) - -/** - * @brief Read a value in DAC register - * @param __INSTANCE__ DAC Instance - * @param __REG__ Register to be read - * @retval Register value - */ -#define LL_DAC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) - -/** - * @} - */ - -/** @defgroup DAC_LL_EM_HELPER_MACRO DAC helper macro - * @{ - */ - -/** - * @brief Helper macro to get DAC channel number in decimal format - * from literals LL_DAC_CHANNEL_x. - * Example: - * __LL_DAC_CHANNEL_TO_DECIMAL_NB(LL_DAC_CHANNEL_1) - * will return decimal number "1". - * @note The input can be a value from functions where a channel - * number is returned. - * @param __CHANNEL__ This parameter can be one of the following values: - * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - * @retval 1...2 (value "2" depending on DAC channel 2 availability) - */ -#define __LL_DAC_CHANNEL_TO_DECIMAL_NB(__CHANNEL__) \ - ((__CHANNEL__) & DAC_SWTR_CHX_MASK) - -/** - * @brief Helper macro to get DAC channel in literal format LL_DAC_CHANNEL_x - * from number in decimal format. - * Example: - * __LL_DAC_DECIMAL_NB_TO_CHANNEL(1) - * will return a data equivalent to "LL_DAC_CHANNEL_1". - * @note If the input parameter does not correspond to a DAC channel, - * this macro returns value '0'. - * @param __DECIMAL_NB__ 1...2 (value "2" depending on DAC channel 2 availability) - * @retval Returned value can be one of the following values: - * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - */ -#if defined(DAC_CHANNEL2_SUPPORT) -#define __LL_DAC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \ - (((__DECIMAL_NB__) == 1UL) \ - ? ( \ - LL_DAC_CHANNEL_1 \ - ) \ - : \ - (((__DECIMAL_NB__) == 2UL) \ - ? ( \ - LL_DAC_CHANNEL_2 \ - ) \ - : \ - ( \ - 0UL \ - ) \ - ) \ - ) -#else -#define __LL_DAC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \ - (((__DECIMAL_NB__) == 1UL) \ - ? ( \ - LL_DAC_CHANNEL_1 \ - ) \ - : \ - ( \ - 0UL \ - ) \ - ) -#endif /* DAC_CHANNEL2_SUPPORT */ - -/** - * @brief Helper macro to define the DAC conversion data full-scale digital - * value corresponding to the selected DAC resolution. - * @note DAC conversion data full-scale corresponds to voltage range - * determined by analog voltage references Vref+ and Vref- - * (refer to reference manual). - * @param __DAC_RESOLUTION__ This parameter can be one of the following values: - * @arg @ref LL_DAC_RESOLUTION_12B - * @arg @ref LL_DAC_RESOLUTION_8B - * @retval ADC conversion data equivalent voltage value (unit: mVolt) - */ -#define __LL_DAC_DIGITAL_SCALE(__DAC_RESOLUTION__) \ - ((0x00000FFFUL) >> ((__DAC_RESOLUTION__) << 1UL)) - -/** - * @brief Helper macro to calculate the DAC conversion data (unit: digital - * value) corresponding to a voltage (unit: mVolt). - * @note This helper macro is intended to provide input data in voltage - * rather than digital value, - * to be used with LL DAC functions such as - * @ref LL_DAC_ConvertData12RightAligned(). - * @note Analog reference voltage (Vref+) must be either known from - * user board environment or can be calculated using ADC measurement - * and ADC helper macro __LL_ADC_CALC_VREFANALOG_VOLTAGE(). - * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) - * @param __DAC_VOLTAGE__ Voltage to be generated by DAC channel - * (unit: mVolt). - * @param __DAC_RESOLUTION__ This parameter can be one of the following values: - * @arg @ref LL_DAC_RESOLUTION_12B - * @arg @ref LL_DAC_RESOLUTION_8B - * @retval DAC conversion data (unit: digital value) - */ -#define __LL_DAC_CALC_VOLTAGE_TO_DATA(__VREFANALOG_VOLTAGE__,\ - __DAC_VOLTAGE__,\ - __DAC_RESOLUTION__) \ -((__DAC_VOLTAGE__) * __LL_DAC_DIGITAL_SCALE(__DAC_RESOLUTION__) \ - / (__VREFANALOG_VOLTAGE__) \ -) - -/** - * @} - */ - -/** - * @} - */ - - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup DAC_LL_Exported_Functions DAC Exported Functions - * @{ - */ -/** - * @brief Set the conversion trigger source for the selected DAC channel. - * @note For conversion trigger source to be effective, DAC trigger - * must be enabled using function @ref LL_DAC_EnableTrigger(). - * @note To set conversion trigger source, DAC channel must be disabled. - * Otherwise, the setting is discarded. - * @note Availability of parameters of trigger sources from timer - * depends on timers availability on the selected device. - * @rmtoll CR TSEL1 LL_DAC_SetTriggerSource\n - * CR TSEL2 LL_DAC_SetTriggerSource - * @param DACx DAC instance - * @param DAC_Channel This parameter can be one of the following values: - * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - * @param TriggerSource This parameter can be one of the following values: - * @arg @ref LL_DAC_TRIG_SOFTWARE - * @arg @ref LL_DAC_TRIG_EXT_TIM8_TRGO - * @arg @ref LL_DAC_TRIG_EXT_TIM7_TRGO - * @arg @ref LL_DAC_TRIG_EXT_TIM6_TRGO - * @arg @ref LL_DAC_TRIG_EXT_TIM5_TRGO - * @arg @ref LL_DAC_TRIG_EXT_TIM4_TRGO - * @arg @ref LL_DAC_TRIG_EXT_TIM2_TRGO - * @arg @ref LL_DAC_TRIG_EXT_EXTI_LINE9 - * @retval None - */ -__STATIC_INLINE void LL_DAC_SetTriggerSource(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t TriggerSource) -{ - MODIFY_REG(DACx->CR, - DAC_CR_TSEL1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), - TriggerSource << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); -} - -/** - * @brief Get the conversion trigger source for the selected DAC channel. - * @note For conversion trigger source to be effective, DAC trigger - * must be enabled using function @ref LL_DAC_EnableTrigger(). - * @note Availability of parameters of trigger sources from timer - * depends on timers availability on the selected device. - * @rmtoll CR TSEL1 LL_DAC_GetTriggerSource\n - * CR TSEL2 LL_DAC_GetTriggerSource - * @param DACx DAC instance - * @param DAC_Channel This parameter can be one of the following values: - * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - * @retval Returned value can be one of the following values: - * @arg @ref LL_DAC_TRIG_SOFTWARE - * @arg @ref LL_DAC_TRIG_EXT_TIM8_TRGO - * @arg @ref LL_DAC_TRIG_EXT_TIM7_TRGO - * @arg @ref LL_DAC_TRIG_EXT_TIM6_TRGO - * @arg @ref LL_DAC_TRIG_EXT_TIM5_TRGO - * @arg @ref LL_DAC_TRIG_EXT_TIM4_TRGO - * @arg @ref LL_DAC_TRIG_EXT_TIM2_TRGO - * @arg @ref LL_DAC_TRIG_EXT_EXTI_LINE9 - */ -__STATIC_INLINE uint32_t LL_DAC_GetTriggerSource(DAC_TypeDef *DACx, uint32_t DAC_Channel) -{ - return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_TSEL1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) - >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) - ); -} - -/** - * @brief Set the waveform automatic generation mode - * for the selected DAC channel. - * @rmtoll CR WAVE1 LL_DAC_SetWaveAutoGeneration\n - * CR WAVE2 LL_DAC_SetWaveAutoGeneration - * @param DACx DAC instance - * @param DAC_Channel This parameter can be one of the following values: - * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - * @param WaveAutoGeneration This parameter can be one of the following values: - * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NONE - * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NOISE - * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE - * @retval None - */ -__STATIC_INLINE void LL_DAC_SetWaveAutoGeneration(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t WaveAutoGeneration) -{ - MODIFY_REG(DACx->CR, - DAC_CR_WAVE1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), - WaveAutoGeneration << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); -} - -/** - * @brief Get the waveform automatic generation mode - * for the selected DAC channel. - * @rmtoll CR WAVE1 LL_DAC_GetWaveAutoGeneration\n - * CR WAVE2 LL_DAC_GetWaveAutoGeneration - * @param DACx DAC instance - * @param DAC_Channel This parameter can be one of the following values: - * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - * @retval Returned value can be one of the following values: - * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NONE - * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NOISE - * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE - */ -__STATIC_INLINE uint32_t LL_DAC_GetWaveAutoGeneration(DAC_TypeDef *DACx, uint32_t DAC_Channel) -{ - return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_WAVE1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) - >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) - ); -} - -/** - * @brief Set the noise waveform generation for the selected DAC channel: - * Noise mode and parameters LFSR (linear feedback shift register). - * @note For wave generation to be effective, DAC channel - * wave generation mode must be enabled using - * function @ref LL_DAC_SetWaveAutoGeneration(). - * @note This setting can be set when the selected DAC channel is disabled - * (otherwise, the setting operation is ignored). - * @rmtoll CR MAMP1 LL_DAC_SetWaveNoiseLFSR\n - * CR MAMP2 LL_DAC_SetWaveNoiseLFSR - * @param DACx DAC instance - * @param DAC_Channel This parameter can be one of the following values: - * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - * @param NoiseLFSRMask This parameter can be one of the following values: - * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BIT0 - * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS1_0 - * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS2_0 - * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS3_0 - * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS4_0 - * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS5_0 - * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS6_0 - * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS7_0 - * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS8_0 - * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS9_0 - * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS10_0 - * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS11_0 - * @retval None - */ -__STATIC_INLINE void LL_DAC_SetWaveNoiseLFSR(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t NoiseLFSRMask) -{ - MODIFY_REG(DACx->CR, - DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), - NoiseLFSRMask << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); -} - -/** - * @brief Get the noise waveform generation for the selected DAC channel: - * Noise mode and parameters LFSR (linear feedback shift register). - * @rmtoll CR MAMP1 LL_DAC_GetWaveNoiseLFSR\n - * CR MAMP2 LL_DAC_GetWaveNoiseLFSR - * @param DACx DAC instance - * @param DAC_Channel This parameter can be one of the following values: - * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - * @retval Returned value can be one of the following values: - * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BIT0 - * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS1_0 - * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS2_0 - * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS3_0 - * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS4_0 - * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS5_0 - * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS6_0 - * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS7_0 - * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS8_0 - * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS9_0 - * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS10_0 - * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS11_0 - */ -__STATIC_INLINE uint32_t LL_DAC_GetWaveNoiseLFSR(DAC_TypeDef *DACx, uint32_t DAC_Channel) -{ - return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) - >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) - ); -} - -/** - * @brief Set the triangle waveform generation for the selected DAC channel: - * triangle mode and amplitude. - * @note For wave generation to be effective, DAC channel - * wave generation mode must be enabled using - * function @ref LL_DAC_SetWaveAutoGeneration(). - * @note This setting can be set when the selected DAC channel is disabled - * (otherwise, the setting operation is ignored). - * @rmtoll CR MAMP1 LL_DAC_SetWaveTriangleAmplitude\n - * CR MAMP2 LL_DAC_SetWaveTriangleAmplitude - * @param DACx DAC instance - * @param DAC_Channel This parameter can be one of the following values: - * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - * @param TriangleAmplitude This parameter can be one of the following values: - * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1 - * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_3 - * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_7 - * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_15 - * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_31 - * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_63 - * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_127 - * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_255 - * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_511 - * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1023 - * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_2047 - * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_4095 - * @retval None - */ -__STATIC_INLINE void LL_DAC_SetWaveTriangleAmplitude(DAC_TypeDef *DACx, uint32_t DAC_Channel, - uint32_t TriangleAmplitude) -{ - MODIFY_REG(DACx->CR, - DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), - TriangleAmplitude << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); -} - -/** - * @brief Get the triangle waveform generation for the selected DAC channel: - * triangle mode and amplitude. - * @rmtoll CR MAMP1 LL_DAC_GetWaveTriangleAmplitude\n - * CR MAMP2 LL_DAC_GetWaveTriangleAmplitude - * @param DACx DAC instance - * @param DAC_Channel This parameter can be one of the following values: - * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - * @retval Returned value can be one of the following values: - * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1 - * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_3 - * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_7 - * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_15 - * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_31 - * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_63 - * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_127 - * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_255 - * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_511 - * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1023 - * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_2047 - * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_4095 - */ -__STATIC_INLINE uint32_t LL_DAC_GetWaveTriangleAmplitude(DAC_TypeDef *DACx, uint32_t DAC_Channel) -{ - return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) - >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) - ); -} - -/** - * @brief Set the output buffer for the selected DAC channel. - * @rmtoll CR BOFF1 LL_DAC_SetOutputBuffer\n - * CR BOFF2 LL_DAC_SetOutputBuffer - * @param DACx DAC instance - * @param DAC_Channel This parameter can be one of the following values: - * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - * @param OutputBuffer This parameter can be one of the following values: - * @arg @ref LL_DAC_OUTPUT_BUFFER_ENABLE - * @arg @ref LL_DAC_OUTPUT_BUFFER_DISABLE - * @retval None - */ -__STATIC_INLINE void LL_DAC_SetOutputBuffer(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t OutputBuffer) -{ - MODIFY_REG(DACx->CR, - DAC_CR_BOFF1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), - OutputBuffer << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); -} - -/** - * @brief Get the output buffer state for the selected DAC channel. - * @rmtoll CR BOFF1 LL_DAC_GetOutputBuffer\n - * CR BOFF2 LL_DAC_GetOutputBuffer - * @param DACx DAC instance - * @param DAC_Channel This parameter can be one of the following values: - * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - * @retval Returned value can be one of the following values: - * @arg @ref LL_DAC_OUTPUT_BUFFER_ENABLE - * @arg @ref LL_DAC_OUTPUT_BUFFER_DISABLE - */ -__STATIC_INLINE uint32_t LL_DAC_GetOutputBuffer(DAC_TypeDef *DACx, uint32_t DAC_Channel) -{ - return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_BOFF1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) - >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) - ); -} - -/** - * @} - */ - -/** @defgroup DAC_LL_EF_DMA_Management DMA Management - * @{ - */ - -/** - * @brief Enable DAC DMA transfer request of the selected channel. - * @note To configure DMA source address (peripheral address), - * use function @ref LL_DAC_DMA_GetRegAddr(). - * @rmtoll CR DMAEN1 LL_DAC_EnableDMAReq\n - * CR DMAEN2 LL_DAC_EnableDMAReq - * @param DACx DAC instance - * @param DAC_Channel This parameter can be one of the following values: - * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - * @retval None - */ -__STATIC_INLINE void LL_DAC_EnableDMAReq(DAC_TypeDef *DACx, uint32_t DAC_Channel) -{ - SET_BIT(DACx->CR, - DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); -} - -/** - * @brief Disable DAC DMA transfer request of the selected channel. - * @note To configure DMA source address (peripheral address), - * use function @ref LL_DAC_DMA_GetRegAddr(). - * @rmtoll CR DMAEN1 LL_DAC_DisableDMAReq\n - * CR DMAEN2 LL_DAC_DisableDMAReq - * @param DACx DAC instance - * @param DAC_Channel This parameter can be one of the following values: - * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - * @retval None - */ -__STATIC_INLINE void LL_DAC_DisableDMAReq(DAC_TypeDef *DACx, uint32_t DAC_Channel) -{ - CLEAR_BIT(DACx->CR, - DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); -} - -/** - * @brief Get DAC DMA transfer request state of the selected channel. - * (0: DAC DMA transfer request is disabled, 1: DAC DMA transfer request is enabled) - * @rmtoll CR DMAEN1 LL_DAC_IsDMAReqEnabled\n - * CR DMAEN2 LL_DAC_IsDMAReqEnabled - * @param DACx DAC instance - * @param DAC_Channel This parameter can be one of the following values: - * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DAC_IsDMAReqEnabled(DAC_TypeDef *DACx, uint32_t DAC_Channel) -{ - return ((READ_BIT(DACx->CR, - DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) - == (DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))) ? 1UL : 0UL); -} - -/** - * @brief Function to help to configure DMA transfer to DAC: retrieve the - * DAC register address from DAC instance and a list of DAC registers - * intended to be used (most commonly) with DMA transfer. - * @note These DAC registers are data holding registers: - * when DAC conversion is requested, DAC generates a DMA transfer - * request to have data available in DAC data holding registers. - * @note This macro is intended to be used with LL DMA driver, refer to - * function "LL_DMA_ConfigAddresses()". - * Example: - * LL_DMA_ConfigAddresses(DMA1, - * LL_DMA_CHANNEL_1, - * (uint32_t)&< array or variable >, - * LL_DAC_DMA_GetRegAddr(DAC1, LL_DAC_CHANNEL_1, - * LL_DAC_DMA_REG_DATA_12BITS_RIGHT_ALIGNED), - * LL_DMA_DIRECTION_MEMORY_TO_PERIPH); - * @rmtoll DHR12R1 DACC1DHR LL_DAC_DMA_GetRegAddr\n - * DHR12L1 DACC1DHR LL_DAC_DMA_GetRegAddr\n - * DHR8R1 DACC1DHR LL_DAC_DMA_GetRegAddr\n - * DHR12R2 DACC2DHR LL_DAC_DMA_GetRegAddr\n - * DHR12L2 DACC2DHR LL_DAC_DMA_GetRegAddr\n - * DHR8R2 DACC2DHR LL_DAC_DMA_GetRegAddr - * @param DACx DAC instance - * @param DAC_Channel This parameter can be one of the following values: - * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - * @param Register This parameter can be one of the following values: - * @arg @ref LL_DAC_DMA_REG_DATA_12BITS_RIGHT_ALIGNED - * @arg @ref LL_DAC_DMA_REG_DATA_12BITS_LEFT_ALIGNED - * @arg @ref LL_DAC_DMA_REG_DATA_8BITS_RIGHT_ALIGNED - * @retval DAC register address - */ -__STATIC_INLINE uint32_t LL_DAC_DMA_GetRegAddr(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Register) -{ - /* Retrieve address of register DHR12Rx, DHR12Lx or DHR8Rx depending on */ - /* DAC channel selected. */ - return ((uint32_t)(__DAC_PTR_REG_OFFSET((DACx)->DHR12R1, ((DAC_Channel >> (Register & 0x1FUL)) - & DAC_REG_DHR_REGOFFSET_MASK_POSBIT0)))); -} -/** - * @} - */ - -/** @defgroup DAC_LL_EF_Operation Operation on DAC channels - * @{ - */ - -/** - * @brief Enable DAC selected channel. - * @rmtoll CR EN1 LL_DAC_Enable\n - * CR EN2 LL_DAC_Enable - * @note After enable from off state, DAC channel requires a delay - * for output voltage to reach accuracy +/- 1 LSB. - * Refer to device datasheet, parameter "tWAKEUP". - * @param DACx DAC instance - * @param DAC_Channel This parameter can be one of the following values: - * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - * @retval None - */ -__STATIC_INLINE void LL_DAC_Enable(DAC_TypeDef *DACx, uint32_t DAC_Channel) -{ - SET_BIT(DACx->CR, - DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); -} - -/** - * @brief Disable DAC selected channel. - * @rmtoll CR EN1 LL_DAC_Disable\n - * CR EN2 LL_DAC_Disable - * @param DACx DAC instance - * @param DAC_Channel This parameter can be one of the following values: - * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - * @retval None - */ -__STATIC_INLINE void LL_DAC_Disable(DAC_TypeDef *DACx, uint32_t DAC_Channel) -{ - CLEAR_BIT(DACx->CR, - DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); -} - -/** - * @brief Get DAC enable state of the selected channel. - * (0: DAC channel is disabled, 1: DAC channel is enabled) - * @rmtoll CR EN1 LL_DAC_IsEnabled\n - * CR EN2 LL_DAC_IsEnabled - * @param DACx DAC instance - * @param DAC_Channel This parameter can be one of the following values: - * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DAC_IsEnabled(DAC_TypeDef *DACx, uint32_t DAC_Channel) -{ - return ((READ_BIT(DACx->CR, - DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) - == (DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))) ? 1UL : 0UL); -} - -/** - * @brief Enable DAC trigger of the selected channel. - * @note - If DAC trigger is disabled, DAC conversion is performed - * automatically once the data holding register is updated, - * using functions "LL_DAC_ConvertData{8; 12}{Right; Left} Aligned()": - * @ref LL_DAC_ConvertData12RightAligned(), ... - * - If DAC trigger is enabled, DAC conversion is performed - * only when a hardware of software trigger event is occurring. - * Select trigger source using - * function @ref LL_DAC_SetTriggerSource(). - * @rmtoll CR TEN1 LL_DAC_EnableTrigger\n - * CR TEN2 LL_DAC_EnableTrigger - * @param DACx DAC instance - * @param DAC_Channel This parameter can be one of the following values: - * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - * @retval None - */ -__STATIC_INLINE void LL_DAC_EnableTrigger(DAC_TypeDef *DACx, uint32_t DAC_Channel) -{ - SET_BIT(DACx->CR, - DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); -} - -/** - * @brief Disable DAC trigger of the selected channel. - * @rmtoll CR TEN1 LL_DAC_DisableTrigger\n - * CR TEN2 LL_DAC_DisableTrigger - * @param DACx DAC instance - * @param DAC_Channel This parameter can be one of the following values: - * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - * @retval None - */ -__STATIC_INLINE void LL_DAC_DisableTrigger(DAC_TypeDef *DACx, uint32_t DAC_Channel) -{ - CLEAR_BIT(DACx->CR, - DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); -} - -/** - * @brief Get DAC trigger state of the selected channel. - * (0: DAC trigger is disabled, 1: DAC trigger is enabled) - * @rmtoll CR TEN1 LL_DAC_IsTriggerEnabled\n - * CR TEN2 LL_DAC_IsTriggerEnabled - * @param DACx DAC instance - * @param DAC_Channel This parameter can be one of the following values: - * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DAC_IsTriggerEnabled(DAC_TypeDef *DACx, uint32_t DAC_Channel) -{ - return ((READ_BIT(DACx->CR, - DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) - == (DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))) ? 1UL : 0UL); -} - -/** - * @brief Trig DAC conversion by software for the selected DAC channel. - * @note Preliminarily, DAC trigger must be set to software trigger - * using function - * @ref LL_DAC_Init() - * @ref LL_DAC_SetTriggerSource() - * with parameter "LL_DAC_TRIGGER_SOFTWARE". - * and DAC trigger must be enabled using - * function @ref LL_DAC_EnableTrigger(). - * @note For devices featuring DAC with 2 channels: this function - * can perform a SW start of both DAC channels simultaneously. - * Two channels can be selected as parameter. - * Example: (LL_DAC_CHANNEL_1 | LL_DAC_CHANNEL_2) - * @rmtoll SWTRIGR SWTRIG1 LL_DAC_TrigSWConversion\n - * SWTRIGR SWTRIG2 LL_DAC_TrigSWConversion - * @param DACx DAC instance - * @param DAC_Channel This parameter can a combination of the following values: - * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - * @retval None - */ -__STATIC_INLINE void LL_DAC_TrigSWConversion(DAC_TypeDef *DACx, uint32_t DAC_Channel) -{ - SET_BIT(DACx->SWTRIGR, - (DAC_Channel & DAC_SWTR_CHX_MASK)); -} - -/** - * @brief Set the data to be loaded in the data holding register - * in format 12 bits left alignment (LSB aligned on bit 0), - * for the selected DAC channel. - * @rmtoll DHR12R1 DACC1DHR LL_DAC_ConvertData12RightAligned\n - * DHR12R2 DACC2DHR LL_DAC_ConvertData12RightAligned - * @param DACx DAC instance - * @param DAC_Channel This parameter can be one of the following values: - * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - * @param Data Value between Min_Data=0x000 and Max_Data=0xFFF - * @retval None - */ -__STATIC_INLINE void LL_DAC_ConvertData12RightAligned(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Data) -{ - __IO uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DHR12R1, (DAC_Channel >> DAC_REG_DHR12RX_REGOFFSET_BITOFFSET_POS) - & DAC_REG_DHR_REGOFFSET_MASK_POSBIT0); - - MODIFY_REG(*preg, DAC_DHR12R1_DACC1DHR, Data); -} - -/** - * @brief Set the data to be loaded in the data holding register - * in format 12 bits left alignment (MSB aligned on bit 15), - * for the selected DAC channel. - * @rmtoll DHR12L1 DACC1DHR LL_DAC_ConvertData12LeftAligned\n - * DHR12L2 DACC2DHR LL_DAC_ConvertData12LeftAligned - * @param DACx DAC instance - * @param DAC_Channel This parameter can be one of the following values: - * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - * @param Data Value between Min_Data=0x000 and Max_Data=0xFFF - * @retval None - */ -__STATIC_INLINE void LL_DAC_ConvertData12LeftAligned(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Data) -{ - __IO uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DHR12R1, (DAC_Channel >> DAC_REG_DHR12LX_REGOFFSET_BITOFFSET_POS) - & DAC_REG_DHR_REGOFFSET_MASK_POSBIT0); - - MODIFY_REG(*preg, DAC_DHR12L1_DACC1DHR, Data); -} - -/** - * @brief Set the data to be loaded in the data holding register - * in format 8 bits left alignment (LSB aligned on bit 0), - * for the selected DAC channel. - * @rmtoll DHR8R1 DACC1DHR LL_DAC_ConvertData8RightAligned\n - * DHR8R2 DACC2DHR LL_DAC_ConvertData8RightAligned - * @param DACx DAC instance - * @param DAC_Channel This parameter can be one of the following values: - * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - * @param Data Value between Min_Data=0x00 and Max_Data=0xFF - * @retval None - */ -__STATIC_INLINE void LL_DAC_ConvertData8RightAligned(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Data) -{ - __IO uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DHR12R1, (DAC_Channel >> DAC_REG_DHR8RX_REGOFFSET_BITOFFSET_POS) - & DAC_REG_DHR_REGOFFSET_MASK_POSBIT0); - - MODIFY_REG(*preg, DAC_DHR8R1_DACC1DHR, Data); -} - -#if defined(DAC_CHANNEL2_SUPPORT) -/** - * @brief Set the data to be loaded in the data holding register - * in format 12 bits left alignment (LSB aligned on bit 0), - * for both DAC channels. - * @rmtoll DHR12RD DACC1DHR LL_DAC_ConvertDualData12RightAligned\n - * DHR12RD DACC2DHR LL_DAC_ConvertDualData12RightAligned - * @param DACx DAC instance - * @param DataChannel1 Value between Min_Data=0x000 and Max_Data=0xFFF - * @param DataChannel2 Value between Min_Data=0x000 and Max_Data=0xFFF - * @retval None - */ -__STATIC_INLINE void LL_DAC_ConvertDualData12RightAligned(DAC_TypeDef *DACx, uint32_t DataChannel1, - uint32_t DataChannel2) -{ - MODIFY_REG(DACx->DHR12RD, - (DAC_DHR12RD_DACC2DHR | DAC_DHR12RD_DACC1DHR), - ((DataChannel2 << DAC_DHR12RD_DACC2DHR_BITOFFSET_POS) | DataChannel1)); -} - -/** - * @brief Set the data to be loaded in the data holding register - * in format 12 bits left alignment (MSB aligned on bit 15), - * for both DAC channels. - * @rmtoll DHR12LD DACC1DHR LL_DAC_ConvertDualData12LeftAligned\n - * DHR12LD DACC2DHR LL_DAC_ConvertDualData12LeftAligned - * @param DACx DAC instance - * @param DataChannel1 Value between Min_Data=0x000 and Max_Data=0xFFF - * @param DataChannel2 Value between Min_Data=0x000 and Max_Data=0xFFF - * @retval None - */ -__STATIC_INLINE void LL_DAC_ConvertDualData12LeftAligned(DAC_TypeDef *DACx, uint32_t DataChannel1, - uint32_t DataChannel2) -{ - /* Note: Data of DAC channel 2 shift value subtracted of 4 because */ - /* data on 16 bits and DAC channel 2 bits field is on the 12 MSB, */ - /* the 4 LSB must be taken into account for the shift value. */ - MODIFY_REG(DACx->DHR12LD, - (DAC_DHR12LD_DACC2DHR | DAC_DHR12LD_DACC1DHR), - ((DataChannel2 << (DAC_DHR12LD_DACC2DHR_BITOFFSET_POS - 4U)) | DataChannel1)); -} - -/** - * @brief Set the data to be loaded in the data holding register - * in format 8 bits left alignment (LSB aligned on bit 0), - * for both DAC channels. - * @rmtoll DHR8RD DACC1DHR LL_DAC_ConvertDualData8RightAligned\n - * DHR8RD DACC2DHR LL_DAC_ConvertDualData8RightAligned - * @param DACx DAC instance - * @param DataChannel1 Value between Min_Data=0x00 and Max_Data=0xFF - * @param DataChannel2 Value between Min_Data=0x00 and Max_Data=0xFF - * @retval None - */ -__STATIC_INLINE void LL_DAC_ConvertDualData8RightAligned(DAC_TypeDef *DACx, uint32_t DataChannel1, - uint32_t DataChannel2) -{ - MODIFY_REG(DACx->DHR8RD, - (DAC_DHR8RD_DACC2DHR | DAC_DHR8RD_DACC1DHR), - ((DataChannel2 << DAC_DHR8RD_DACC2DHR_BITOFFSET_POS) | DataChannel1)); -} -#endif /* DAC_CHANNEL2_SUPPORT */ - -/** - * @brief Retrieve output data currently generated for the selected DAC channel. - * @note Whatever alignment and resolution settings - * (using functions "LL_DAC_ConvertData{8; 12}{Right; Left} Aligned()": - * @ref LL_DAC_ConvertData12RightAligned(), ...), - * output data format is 12 bits right aligned (LSB aligned on bit 0). - * @rmtoll DOR1 DACC1DOR LL_DAC_RetrieveOutputData\n - * DOR2 DACC2DOR LL_DAC_RetrieveOutputData - * @param DACx DAC instance - * @param DAC_Channel This parameter can be one of the following values: - * @arg @ref LL_DAC_CHANNEL_1 - * @arg @ref LL_DAC_CHANNEL_2 (1) - * - * (1) On this STM32 serie, parameter not available on all devices. - * Refer to device datasheet for channels availability. - * @retval Value between Min_Data=0x000 and Max_Data=0xFFF - */ -__STATIC_INLINE uint32_t LL_DAC_RetrieveOutputData(DAC_TypeDef *DACx, uint32_t DAC_Channel) -{ - __IO uint32_t const *preg = __DAC_PTR_REG_OFFSET(DACx->DOR1, (DAC_Channel >> DAC_REG_DORX_REGOFFSET_BITOFFSET_POS) - & DAC_REG_DORX_REGOFFSET_MASK_POSBIT0); - - return (uint16_t) READ_BIT(*preg, DAC_DOR1_DACC1DOR); -} - -/** - * @} - */ - -/** @defgroup DAC_LL_EF_FLAG_Management FLAG Management - * @{ - */ - -/** - * @brief Get DAC underrun flag for DAC channel 1 - * @rmtoll SR DMAUDR1 LL_DAC_IsActiveFlag_DMAUDR1 - * @param DACx DAC instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DAC_IsActiveFlag_DMAUDR1(DAC_TypeDef *DACx) -{ - return ((READ_BIT(DACx->SR, LL_DAC_FLAG_DMAUDR1) == (LL_DAC_FLAG_DMAUDR1)) ? 1UL : 0UL); -} - -#if defined(DAC_CHANNEL2_SUPPORT) -/** - * @brief Get DAC underrun flag for DAC channel 2 - * @rmtoll SR DMAUDR2 LL_DAC_IsActiveFlag_DMAUDR2 - * @param DACx DAC instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DAC_IsActiveFlag_DMAUDR2(DAC_TypeDef *DACx) -{ - return ((READ_BIT(DACx->SR, LL_DAC_FLAG_DMAUDR2) == (LL_DAC_FLAG_DMAUDR2)) ? 1UL : 0UL); -} -#endif /* DAC_CHANNEL2_SUPPORT */ - -/** - * @brief Clear DAC underrun flag for DAC channel 1 - * @rmtoll SR DMAUDR1 LL_DAC_ClearFlag_DMAUDR1 - * @param DACx DAC instance - * @retval None - */ -__STATIC_INLINE void LL_DAC_ClearFlag_DMAUDR1(DAC_TypeDef *DACx) -{ - WRITE_REG(DACx->SR, LL_DAC_FLAG_DMAUDR1); -} - -#if defined(DAC_CHANNEL2_SUPPORT) -/** - * @brief Clear DAC underrun flag for DAC channel 2 - * @rmtoll SR DMAUDR2 LL_DAC_ClearFlag_DMAUDR2 - * @param DACx DAC instance - * @retval None - */ -__STATIC_INLINE void LL_DAC_ClearFlag_DMAUDR2(DAC_TypeDef *DACx) -{ - WRITE_REG(DACx->SR, LL_DAC_FLAG_DMAUDR2); -} -#endif /* DAC_CHANNEL2_SUPPORT */ - -/** - * @} - */ - -/** @defgroup DAC_LL_EF_IT_Management IT management - * @{ - */ - -/** - * @brief Enable DMA underrun interrupt for DAC channel 1 - * @rmtoll CR DMAUDRIE1 LL_DAC_EnableIT_DMAUDR1 - * @param DACx DAC instance - * @retval None - */ -__STATIC_INLINE void LL_DAC_EnableIT_DMAUDR1(DAC_TypeDef *DACx) -{ - SET_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE1); -} - -#if defined(DAC_CHANNEL2_SUPPORT) -/** - * @brief Enable DMA underrun interrupt for DAC channel 2 - * @rmtoll CR DMAUDRIE2 LL_DAC_EnableIT_DMAUDR2 - * @param DACx DAC instance - * @retval None - */ -__STATIC_INLINE void LL_DAC_EnableIT_DMAUDR2(DAC_TypeDef *DACx) -{ - SET_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE2); -} -#endif /* DAC_CHANNEL2_SUPPORT */ - -/** - * @brief Disable DMA underrun interrupt for DAC channel 1 - * @rmtoll CR DMAUDRIE1 LL_DAC_DisableIT_DMAUDR1 - * @param DACx DAC instance - * @retval None - */ -__STATIC_INLINE void LL_DAC_DisableIT_DMAUDR1(DAC_TypeDef *DACx) -{ - CLEAR_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE1); -} - -#if defined(DAC_CHANNEL2_SUPPORT) -/** - * @brief Disable DMA underrun interrupt for DAC channel 2 - * @rmtoll CR DMAUDRIE2 LL_DAC_DisableIT_DMAUDR2 - * @param DACx DAC instance - * @retval None - */ -__STATIC_INLINE void LL_DAC_DisableIT_DMAUDR2(DAC_TypeDef *DACx) -{ - CLEAR_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE2); -} -#endif /* DAC_CHANNEL2_SUPPORT */ - -/** - * @brief Get DMA underrun interrupt for DAC channel 1 - * @rmtoll CR DMAUDRIE1 LL_DAC_IsEnabledIT_DMAUDR1 - * @param DACx DAC instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DAC_IsEnabledIT_DMAUDR1(DAC_TypeDef *DACx) -{ - return ((READ_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE1) == (LL_DAC_IT_DMAUDRIE1)) ? 1UL : 0UL); -} - -#if defined(DAC_CHANNEL2_SUPPORT) -/** - * @brief Get DMA underrun interrupt for DAC channel 2 - * @rmtoll CR DMAUDRIE2 LL_DAC_IsEnabledIT_DMAUDR2 - * @param DACx DAC instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DAC_IsEnabledIT_DMAUDR2(DAC_TypeDef *DACx) -{ - return ((READ_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE2) == (LL_DAC_IT_DMAUDRIE2)) ? 1UL : 0UL); -} -#endif /* DAC_CHANNEL2_SUPPORT */ - -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup DAC_LL_EF_Init Initialization and de-initialization functions - * @{ - */ - -ErrorStatus LL_DAC_DeInit(DAC_TypeDef *DACx); -ErrorStatus LL_DAC_Init(DAC_TypeDef *DACx, uint32_t DAC_Channel, LL_DAC_InitTypeDef *DAC_InitStruct); -void LL_DAC_StructInit(LL_DAC_InitTypeDef *DAC_InitStruct); - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* DAC */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F4xx_LL_DAC_H */ - +/** + ****************************************************************************** + * @file stm32f4xx_ll_dac.h + * @author MCD Application Team + * @brief Header file of DAC LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F4xx_LL_DAC_H +#define STM32F4xx_LL_DAC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_LL_Driver + * @{ + */ + +#if defined(DAC) + +/** @defgroup DAC_LL DAC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup DAC_LL_Private_Constants DAC Private Constants + * @{ + */ + +/* Internal masks for DAC channels definition */ +/* To select into literal LL_DAC_CHANNEL_x the relevant bits for: */ +/* - channel bits position into registers CR, MCR, CCR, SHHR, SHRR */ +/* - channel bits position into register SWTRIG */ +/* - channel register offset of data holding register DHRx */ +/* - channel register offset of data output register DORx */ +#define DAC_CR_CH1_BITOFFSET 0UL /* Position of channel bits into registers + CR, MCR, CCR, SHHR, SHRR of channel 1 */ +#if defined(DAC_CHANNEL2_SUPPORT) +#define DAC_CR_CH2_BITOFFSET 16UL /* Position of channel bits into registers + CR, MCR, CCR, SHHR, SHRR of channel 2 */ +#define DAC_CR_CHX_BITOFFSET_MASK (DAC_CR_CH1_BITOFFSET | DAC_CR_CH2_BITOFFSET) +#else +#define DAC_CR_CHX_BITOFFSET_MASK (DAC_CR_CH1_BITOFFSET) +#endif /* DAC_CHANNEL2_SUPPORT */ + +#define DAC_SWTR_CH1 (DAC_SWTRIGR_SWTRIG1) /* Channel bit into register SWTRIGR of channel 1. */ +#if defined(DAC_CHANNEL2_SUPPORT) +#define DAC_SWTR_CH2 (DAC_SWTRIGR_SWTRIG2) /* Channel bit into register SWTRIGR of channel 2. */ +#define DAC_SWTR_CHX_MASK (DAC_SWTR_CH1 | DAC_SWTR_CH2) +#else +#define DAC_SWTR_CHX_MASK (DAC_SWTR_CH1) +#endif /* DAC_CHANNEL2_SUPPORT */ + +#define DAC_REG_DHR12R1_REGOFFSET 0x00000000UL /* Register DHR12Rx channel 1 taken as reference */ +#define DAC_REG_DHR12L1_REGOFFSET 0x00100000UL /* Register offset of DHR12Lx channel 1 versus + DHR12Rx channel 1 (shifted left of 20 bits) */ +#define DAC_REG_DHR8R1_REGOFFSET 0x02000000UL /* Register offset of DHR8Rx channel 1 versus + DHR12Rx channel 1 (shifted left of 24 bits) */ +#if defined(DAC_CHANNEL2_SUPPORT) +#define DAC_REG_DHR12R2_REGOFFSET 0x00030000UL /* Register offset of DHR12Rx channel 2 versus + DHR12Rx channel 1 (shifted left of 16 bits) */ +#define DAC_REG_DHR12L2_REGOFFSET 0x00400000UL /* Register offset of DHR12Lx channel 2 versus + DHR12Rx channel 1 (shifted left of 20 bits) */ +#define DAC_REG_DHR8R2_REGOFFSET 0x05000000UL /* Register offset of DHR8Rx channel 2 versus + DHR12Rx channel 1 (shifted left of 24 bits) */ +#endif /* DAC_CHANNEL2_SUPPORT */ +#define DAC_REG_DHR12RX_REGOFFSET_MASK 0x000F0000UL +#define DAC_REG_DHR12LX_REGOFFSET_MASK 0x00F00000UL +#define DAC_REG_DHR8RX_REGOFFSET_MASK 0x0F000000UL +#define DAC_REG_DHRX_REGOFFSET_MASK (DAC_REG_DHR12RX_REGOFFSET_MASK\ + | DAC_REG_DHR12LX_REGOFFSET_MASK | DAC_REG_DHR8RX_REGOFFSET_MASK) + +#define DAC_REG_DOR1_REGOFFSET 0x00000000UL /* Register DORx channel 1 taken as reference */ +#if defined(DAC_CHANNEL2_SUPPORT) +#define DAC_REG_DOR2_REGOFFSET 0x10000000UL /* Register offset of DORx channel 1 versus + DORx channel 2 (shifted left of 28 bits) */ +#define DAC_REG_DORX_REGOFFSET_MASK (DAC_REG_DOR1_REGOFFSET | DAC_REG_DOR2_REGOFFSET) +#endif /* DAC_CHANNEL2_SUPPORT */ + + +#define DAC_REG_DHR_REGOFFSET_MASK_POSBIT0 0x0000000FUL /* Mask of data hold registers offset (DHR12Rx, + DHR12Lx, DHR8Rx, ...) when shifted to position 0 */ +#define DAC_REG_DORX_REGOFFSET_MASK_POSBIT0 0x00000001UL /* Mask of DORx registers offset when shifted + to position 0 */ +#define DAC_REG_SHSRX_REGOFFSET_MASK_POSBIT0 0x00000001UL /* Mask of SHSRx registers offset when shifted + to position 0 */ + +#define DAC_REG_DHR12RX_REGOFFSET_BITOFFSET_POS 16UL /* Position of bits register offset of DHR12Rx + channel 1 or 2 versus DHR12Rx channel 1 + (shifted left of 16 bits) */ +#define DAC_REG_DHR12LX_REGOFFSET_BITOFFSET_POS 20UL /* Position of bits register offset of DHR12Lx + channel 1 or 2 versus DHR12Rx channel 1 + (shifted left of 20 bits) */ +#define DAC_REG_DHR8RX_REGOFFSET_BITOFFSET_POS 24UL /* Position of bits register offset of DHR8Rx + channel 1 or 2 versus DHR12Rx channel 1 + (shifted left of 24 bits) */ +#define DAC_REG_DORX_REGOFFSET_BITOFFSET_POS 28UL /* Position of bits register offset of DORx + channel 1 or 2 versus DORx channel 1 + (shifted left of 28 bits) */ + +/* DAC registers bits positions */ +#if defined(DAC_CHANNEL2_SUPPORT) +#endif +#define DAC_DHR12RD_DACC2DHR_BITOFFSET_POS DAC_DHR12RD_DACC2DHR_Pos +#define DAC_DHR12LD_DACC2DHR_BITOFFSET_POS DAC_DHR12LD_DACC2DHR_Pos +#define DAC_DHR8RD_DACC2DHR_BITOFFSET_POS DAC_DHR8RD_DACC2DHR_Pos + +/* Miscellaneous data */ +#define DAC_DIGITAL_SCALE_12BITS 4095UL /* Full-scale digital value with a resolution of 12 + bits (voltage range determined by analog voltage + references Vref+ and Vref-, refer to reference manual) */ + +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DAC_LL_Private_Macros DAC Private Macros + * @{ + */ + +/** + * @brief Driver macro reserved for internal use: set a pointer to + * a register from a register basis from which an offset + * is applied. + * @param __REG__ Register basis from which the offset is applied. + * @param __REG_OFFFSET__ Offset to be applied (unit: number of registers). + * @retval Pointer to register address + */ +#define __DAC_PTR_REG_OFFSET(__REG__, __REG_OFFFSET__) \ + ((uint32_t *)((uint32_t) ((uint32_t)(&(__REG__)) + ((__REG_OFFFSET__) << 2UL)))) + +/** + * @} + */ + + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DAC_LL_ES_INIT DAC Exported Init structure + * @{ + */ + +/** + * @brief Structure definition of some features of DAC instance. + */ +typedef struct +{ + uint32_t TriggerSource; /*!< Set the conversion trigger source for the selected DAC channel: + internal (SW start) or from external peripheral + (timer event, external interrupt line). + This parameter can be a value of @ref DAC_LL_EC_TRIGGER_SOURCE + + This feature can be modified afterwards using unitary + function @ref LL_DAC_SetTriggerSource(). */ + + uint32_t WaveAutoGeneration; /*!< Set the waveform automatic generation mode for the selected DAC channel. + This parameter can be a value of @ref DAC_LL_EC_WAVE_AUTO_GENERATION_MODE + + This feature can be modified afterwards using unitary + function @ref LL_DAC_SetWaveAutoGeneration(). */ + + uint32_t WaveAutoGenerationConfig; /*!< Set the waveform automatic generation mode for the selected DAC channel. + If waveform automatic generation mode is set to noise, this parameter + can be a value of @ref DAC_LL_EC_WAVE_NOISE_LFSR_UNMASK_BITS + If waveform automatic generation mode is set to triangle, + this parameter can be a value of @ref DAC_LL_EC_WAVE_TRIANGLE_AMPLITUDE + @note If waveform automatic generation mode is disabled, + this parameter is discarded. + + This feature can be modified afterwards using unitary + function @ref LL_DAC_SetWaveNoiseLFSR(), + @ref LL_DAC_SetWaveTriangleAmplitude() + depending on the wave automatic generation selected. */ + + uint32_t OutputBuffer; /*!< Set the output buffer for the selected DAC channel. + This parameter can be a value of @ref DAC_LL_EC_OUTPUT_BUFFER + + This feature can be modified afterwards using unitary + function @ref LL_DAC_SetOutputBuffer(). */ +} LL_DAC_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DAC_LL_Exported_Constants DAC Exported Constants + * @{ + */ + +/** @defgroup DAC_LL_EC_GET_FLAG DAC flags + * @brief Flags defines which can be used with LL_DAC_ReadReg function + * @{ + */ +/* DAC channel 1 flags */ +#define LL_DAC_FLAG_DMAUDR1 (DAC_SR_DMAUDR1) /*!< DAC channel 1 flag DMA underrun */ +#if defined(DAC_CHANNEL2_SUPPORT) +/* DAC channel 2 flags */ +#define LL_DAC_FLAG_DMAUDR2 (DAC_SR_DMAUDR2) /*!< DAC channel 2 flag DMA underrun */ +#endif /* DAC_CHANNEL2_SUPPORT */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_IT DAC interruptions + * @brief IT defines which can be used with LL_DAC_ReadReg and LL_DAC_WriteReg functions + * @{ + */ +#define LL_DAC_IT_DMAUDRIE1 (DAC_CR_DMAUDRIE1) /*!< DAC channel 1 interruption DMA underrun */ +#if defined(DAC_CHANNEL2_SUPPORT) +#define LL_DAC_IT_DMAUDRIE2 (DAC_CR_DMAUDRIE2) /*!< DAC channel 2 interruption DMA underrun */ +#endif /* DAC_CHANNEL2_SUPPORT */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_CHANNEL DAC channels + * @{ + */ +#define LL_DAC_CHANNEL_1 (DAC_REG_DOR1_REGOFFSET | DAC_REG_DHR12R1_REGOFFSET | DAC_REG_DHR12L1_REGOFFSET | DAC_REG_DHR8R1_REGOFFSET | DAC_CR_CH1_BITOFFSET | DAC_SWTR_CH1) /*!< DAC channel 1 */ +#if defined(DAC_CHANNEL2_SUPPORT) +#define LL_DAC_CHANNEL_2 (DAC_REG_DOR2_REGOFFSET | DAC_REG_DHR12R2_REGOFFSET | DAC_REG_DHR12L2_REGOFFSET | DAC_REG_DHR8R2_REGOFFSET | DAC_CR_CH2_BITOFFSET | DAC_SWTR_CH2) /*!< DAC channel 2 */ +#endif /* DAC_CHANNEL2_SUPPORT */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_TRIGGER_SOURCE DAC trigger source + * @{ + */ +#define LL_DAC_TRIG_SOFTWARE (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger internal (SW start) */ +#define LL_DAC_TRIG_EXT_TIM2_TRGO (DAC_CR_TSEL1_2 ) /*!< DAC channel conversion trigger from external peripheral: TIM2 TRGO. */ +#define LL_DAC_TRIG_EXT_TIM8_TRGO ( DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external peripheral: TIM8 TRGO. */ +#define LL_DAC_TRIG_EXT_TIM4_TRGO (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external peripheral: TIM4 TRGO. */ +#define LL_DAC_TRIG_EXT_TIM6_TRGO 0x00000000UL /*!< DAC channel conversion trigger from external peripheral: TIM6 TRGO. */ +#define LL_DAC_TRIG_EXT_TIM7_TRGO ( DAC_CR_TSEL1_1 ) /*!< DAC channel conversion trigger from external peripheral: TIM7 TRGO. */ +#define LL_DAC_TRIG_EXT_TIM5_TRGO ( DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external peripheral: TIM5 TRGO. */ +#define LL_DAC_TRIG_EXT_EXTI_LINE9 (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 ) /*!< DAC channel conversion trigger from external peripheral: external interrupt line 9. */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_WAVE_AUTO_GENERATION_MODE DAC waveform automatic generation mode + * @{ + */ +#define LL_DAC_WAVE_AUTO_GENERATION_NONE 0x00000000UL /*!< DAC channel wave auto generation mode disabled. */ +#define LL_DAC_WAVE_AUTO_GENERATION_NOISE ( DAC_CR_WAVE1_0) /*!< DAC channel wave auto generation mode enabled, set generated noise waveform. */ +#define LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE (DAC_CR_WAVE1_1 ) /*!< DAC channel wave auto generation mode enabled, set generated triangle waveform. */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_WAVE_NOISE_LFSR_UNMASK_BITS DAC wave generation - Noise LFSR unmask bits + * @{ + */ +#define LL_DAC_NOISE_LFSR_UNMASK_BIT0 0x00000000UL /*!< Noise wave generation, unmask LFSR bit0, for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS1_0 ( DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[1:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS2_0 ( DAC_CR_MAMP1_1 ) /*!< Noise wave generation, unmask LFSR bits[2:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS3_0 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[3:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS4_0 ( DAC_CR_MAMP1_2 ) /*!< Noise wave generation, unmask LFSR bits[4:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS5_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[5:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS6_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 ) /*!< Noise wave generation, unmask LFSR bits[6:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS7_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[7:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS8_0 (DAC_CR_MAMP1_3 ) /*!< Noise wave generation, unmask LFSR bits[8:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS9_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[9:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS10_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 ) /*!< Noise wave generation, unmask LFSR bits[10:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS11_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[11:0], for the selected DAC channel */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_WAVE_TRIANGLE_AMPLITUDE DAC wave generation - Triangle amplitude + * @{ + */ +#define LL_DAC_TRIANGLE_AMPLITUDE_1 0x00000000UL /*!< Triangle wave generation, amplitude of 1 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_3 ( DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 3 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_7 ( DAC_CR_MAMP1_1 ) /*!< Triangle wave generation, amplitude of 7 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_15 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 15 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_31 ( DAC_CR_MAMP1_2 ) /*!< Triangle wave generation, amplitude of 31 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_63 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 63 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_127 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 ) /*!< Triangle wave generation, amplitude of 127 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_255 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 255 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_511 (DAC_CR_MAMP1_3 ) /*!< Triangle wave generation, amplitude of 512 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_1023 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 1023 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_2047 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 ) /*!< Triangle wave generation, amplitude of 2047 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_4095 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 4095 LSB of DAC output range, for the selected DAC channel */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_OUTPUT_BUFFER DAC channel output buffer + * @{ + */ +#define LL_DAC_OUTPUT_BUFFER_ENABLE 0x00000000UL /*!< The selected DAC channel output is buffered: higher drive current capability, but also higher current consumption */ +#define LL_DAC_OUTPUT_BUFFER_DISABLE (DAC_CR_BOFF1) /*!< The selected DAC channel output is not buffered: lower drive current capability, but also lower current consumption */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_RESOLUTION DAC channel output resolution + * @{ + */ +#define LL_DAC_RESOLUTION_12B 0x00000000UL /*!< DAC channel resolution 12 bits */ +#define LL_DAC_RESOLUTION_8B 0x00000002UL /*!< DAC channel resolution 8 bits */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_REGISTERS DAC registers compliant with specific purpose + * @{ + */ +/* List of DAC registers intended to be used (most commonly) with */ +/* DMA transfer. */ +/* Refer to function @ref LL_DAC_DMA_GetRegAddr(). */ +#define LL_DAC_DMA_REG_DATA_12BITS_RIGHT_ALIGNED DAC_REG_DHR12RX_REGOFFSET_BITOFFSET_POS /*!< DAC channel data holding register 12 bits right aligned */ +#define LL_DAC_DMA_REG_DATA_12BITS_LEFT_ALIGNED DAC_REG_DHR12LX_REGOFFSET_BITOFFSET_POS /*!< DAC channel data holding register 12 bits left aligned */ +#define LL_DAC_DMA_REG_DATA_8BITS_RIGHT_ALIGNED DAC_REG_DHR8RX_REGOFFSET_BITOFFSET_POS /*!< DAC channel data holding register 8 bits right aligned */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_HW_DELAYS Definitions of DAC hardware constraints delays + * @note Only DAC peripheral HW delays are defined in DAC LL driver driver, + * not timeout values. + * For details on delays values, refer to descriptions in source code + * above each literal definition. + * @{ + */ + +/* Delay for DAC channel voltage settling time from DAC channel startup */ +/* (transition from disable to enable). */ +/* Note: DAC channel startup time depends on board application environment: */ +/* impedance connected to DAC channel output. */ +/* The delay below is specified under conditions: */ +/* - voltage maximum transition (lowest to highest value) */ +/* - until voltage reaches final value +-1LSB */ +/* - DAC channel output buffer enabled */ +/* - load impedance of 5kOhm (min), 50pF (max) */ +/* Literal set to maximum value (refer to device datasheet, */ +/* parameter "tWAKEUP"). */ +/* Unit: us */ +#define LL_DAC_DELAY_STARTUP_VOLTAGE_SETTLING_US 15UL /*!< Delay for DAC channel voltage settling time from DAC channel startup (transition from disable to enable) */ + +/* Delay for DAC channel voltage settling time. */ +/* Note: DAC channel startup time depends on board application environment: */ +/* impedance connected to DAC channel output. */ +/* The delay below is specified under conditions: */ +/* - voltage maximum transition (lowest to highest value) */ +/* - until voltage reaches final value +-1LSB */ +/* - DAC channel output buffer enabled */ +/* - load impedance of 5kOhm min, 50pF max */ +/* Literal set to maximum value (refer to device datasheet, */ +/* parameter "tSETTLING"). */ +/* Unit: us */ +#define LL_DAC_DELAY_VOLTAGE_SETTLING_US 12UL /*!< Delay for DAC channel voltage settling time */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DAC_LL_Exported_Macros DAC Exported Macros + * @{ + */ + +/** @defgroup DAC_LL_EM_WRITE_READ Common write and read registers macros + * @{ + */ + +/** + * @brief Write a value in DAC register + * @param __INSTANCE__ DAC Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_DAC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in DAC register + * @param __INSTANCE__ DAC Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_DAC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) + +/** + * @} + */ + +/** @defgroup DAC_LL_EM_HELPER_MACRO DAC helper macro + * @{ + */ + +/** + * @brief Helper macro to get DAC channel number in decimal format + * from literals LL_DAC_CHANNEL_x. + * Example: + * __LL_DAC_CHANNEL_TO_DECIMAL_NB(LL_DAC_CHANNEL_1) + * will return decimal number "1". + * @note The input can be a value from functions where a channel + * number is returned. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 (1) + * + * (1) On this STM32 serie, parameter not available on all devices. + * Refer to device datasheet for channels availability. + * @retval 1...2 (value "2" depending on DAC channel 2 availability) + */ +#define __LL_DAC_CHANNEL_TO_DECIMAL_NB(__CHANNEL__) \ + ((__CHANNEL__) & DAC_SWTR_CHX_MASK) + +/** + * @brief Helper macro to get DAC channel in literal format LL_DAC_CHANNEL_x + * from number in decimal format. + * Example: + * __LL_DAC_DECIMAL_NB_TO_CHANNEL(1) + * will return a data equivalent to "LL_DAC_CHANNEL_1". + * @note If the input parameter does not correspond to a DAC channel, + * this macro returns value '0'. + * @param __DECIMAL_NB__ 1...2 (value "2" depending on DAC channel 2 availability) + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 (1) + * + * (1) On this STM32 serie, parameter not available on all devices. + * Refer to device datasheet for channels availability. + */ +#if defined(DAC_CHANNEL2_SUPPORT) +#define __LL_DAC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \ + (((__DECIMAL_NB__) == 1UL) \ + ? ( \ + LL_DAC_CHANNEL_1 \ + ) \ + : \ + (((__DECIMAL_NB__) == 2UL) \ + ? ( \ + LL_DAC_CHANNEL_2 \ + ) \ + : \ + ( \ + 0UL \ + ) \ + ) \ + ) +#else +#define __LL_DAC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \ + (((__DECIMAL_NB__) == 1UL) \ + ? ( \ + LL_DAC_CHANNEL_1 \ + ) \ + : \ + ( \ + 0UL \ + ) \ + ) +#endif /* DAC_CHANNEL2_SUPPORT */ + +/** + * @brief Helper macro to define the DAC conversion data full-scale digital + * value corresponding to the selected DAC resolution. + * @note DAC conversion data full-scale corresponds to voltage range + * determined by analog voltage references Vref+ and Vref- + * (refer to reference manual). + * @param __DAC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_DAC_RESOLUTION_12B + * @arg @ref LL_DAC_RESOLUTION_8B + * @retval ADC conversion data equivalent voltage value (unit: mVolt) + */ +#define __LL_DAC_DIGITAL_SCALE(__DAC_RESOLUTION__) \ + ((0x00000FFFUL) >> ((__DAC_RESOLUTION__) << 1UL)) + +/** + * @brief Helper macro to calculate the DAC conversion data (unit: digital + * value) corresponding to a voltage (unit: mVolt). + * @note This helper macro is intended to provide input data in voltage + * rather than digital value, + * to be used with LL DAC functions such as + * @ref LL_DAC_ConvertData12RightAligned(). + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) + * @param __DAC_VOLTAGE__ Voltage to be generated by DAC channel + * (unit: mVolt). + * @param __DAC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_DAC_RESOLUTION_12B + * @arg @ref LL_DAC_RESOLUTION_8B + * @retval DAC conversion data (unit: digital value) + */ +#define __LL_DAC_CALC_VOLTAGE_TO_DATA(__VREFANALOG_VOLTAGE__,\ + __DAC_VOLTAGE__,\ + __DAC_RESOLUTION__) \ +((__DAC_VOLTAGE__) * __LL_DAC_DIGITAL_SCALE(__DAC_RESOLUTION__) \ + / (__VREFANALOG_VOLTAGE__) \ +) + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DAC_LL_Exported_Functions DAC Exported Functions + * @{ + */ +/** + * @brief Set the conversion trigger source for the selected DAC channel. + * @note For conversion trigger source to be effective, DAC trigger + * must be enabled using function @ref LL_DAC_EnableTrigger(). + * @note To set conversion trigger source, DAC channel must be disabled. + * Otherwise, the setting is discarded. + * @note Availability of parameters of trigger sources from timer + * depends on timers availability on the selected device. + * @rmtoll CR TSEL1 LL_DAC_SetTriggerSource\n + * CR TSEL2 LL_DAC_SetTriggerSource + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 (1) + * + * (1) On this STM32 serie, parameter not available on all devices. + * Refer to device datasheet for channels availability. + * @param TriggerSource This parameter can be one of the following values: + * @arg @ref LL_DAC_TRIG_SOFTWARE + * @arg @ref LL_DAC_TRIG_EXT_TIM8_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM7_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM6_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM5_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM4_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM2_TRGO + * @arg @ref LL_DAC_TRIG_EXT_EXTI_LINE9 + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetTriggerSource(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t TriggerSource) +{ + MODIFY_REG(DACx->CR, + DAC_CR_TSEL1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + TriggerSource << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get the conversion trigger source for the selected DAC channel. + * @note For conversion trigger source to be effective, DAC trigger + * must be enabled using function @ref LL_DAC_EnableTrigger(). + * @note Availability of parameters of trigger sources from timer + * depends on timers availability on the selected device. + * @rmtoll CR TSEL1 LL_DAC_GetTriggerSource\n + * CR TSEL2 LL_DAC_GetTriggerSource + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 (1) + * + * (1) On this STM32 serie, parameter not available on all devices. + * Refer to device datasheet for channels availability. + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_TRIG_SOFTWARE + * @arg @ref LL_DAC_TRIG_EXT_TIM8_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM7_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM6_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM5_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM4_TRGO + * @arg @ref LL_DAC_TRIG_EXT_TIM2_TRGO + * @arg @ref LL_DAC_TRIG_EXT_EXTI_LINE9 + */ +__STATIC_INLINE uint32_t LL_DAC_GetTriggerSource(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_TSEL1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); +} + +/** + * @brief Set the waveform automatic generation mode + * for the selected DAC channel. + * @rmtoll CR WAVE1 LL_DAC_SetWaveAutoGeneration\n + * CR WAVE2 LL_DAC_SetWaveAutoGeneration + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 (1) + * + * (1) On this STM32 serie, parameter not available on all devices. + * Refer to device datasheet for channels availability. + * @param WaveAutoGeneration This parameter can be one of the following values: + * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NONE + * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NOISE + * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetWaveAutoGeneration(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t WaveAutoGeneration) +{ + MODIFY_REG(DACx->CR, + DAC_CR_WAVE1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + WaveAutoGeneration << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get the waveform automatic generation mode + * for the selected DAC channel. + * @rmtoll CR WAVE1 LL_DAC_GetWaveAutoGeneration\n + * CR WAVE2 LL_DAC_GetWaveAutoGeneration + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 (1) + * + * (1) On this STM32 serie, parameter not available on all devices. + * Refer to device datasheet for channels availability. + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NONE + * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NOISE + * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE + */ +__STATIC_INLINE uint32_t LL_DAC_GetWaveAutoGeneration(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_WAVE1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); +} + +/** + * @brief Set the noise waveform generation for the selected DAC channel: + * Noise mode and parameters LFSR (linear feedback shift register). + * @note For wave generation to be effective, DAC channel + * wave generation mode must be enabled using + * function @ref LL_DAC_SetWaveAutoGeneration(). + * @note This setting can be set when the selected DAC channel is disabled + * (otherwise, the setting operation is ignored). + * @rmtoll CR MAMP1 LL_DAC_SetWaveNoiseLFSR\n + * CR MAMP2 LL_DAC_SetWaveNoiseLFSR + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 (1) + * + * (1) On this STM32 serie, parameter not available on all devices. + * Refer to device datasheet for channels availability. + * @param NoiseLFSRMask This parameter can be one of the following values: + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BIT0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS1_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS2_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS3_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS4_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS5_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS6_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS7_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS8_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS9_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS10_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS11_0 + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetWaveNoiseLFSR(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t NoiseLFSRMask) +{ + MODIFY_REG(DACx->CR, + DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + NoiseLFSRMask << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get the noise waveform generation for the selected DAC channel: + * Noise mode and parameters LFSR (linear feedback shift register). + * @rmtoll CR MAMP1 LL_DAC_GetWaveNoiseLFSR\n + * CR MAMP2 LL_DAC_GetWaveNoiseLFSR + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 (1) + * + * (1) On this STM32 serie, parameter not available on all devices. + * Refer to device datasheet for channels availability. + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BIT0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS1_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS2_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS3_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS4_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS5_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS6_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS7_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS8_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS9_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS10_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS11_0 + */ +__STATIC_INLINE uint32_t LL_DAC_GetWaveNoiseLFSR(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); +} + +/** + * @brief Set the triangle waveform generation for the selected DAC channel: + * triangle mode and amplitude. + * @note For wave generation to be effective, DAC channel + * wave generation mode must be enabled using + * function @ref LL_DAC_SetWaveAutoGeneration(). + * @note This setting can be set when the selected DAC channel is disabled + * (otherwise, the setting operation is ignored). + * @rmtoll CR MAMP1 LL_DAC_SetWaveTriangleAmplitude\n + * CR MAMP2 LL_DAC_SetWaveTriangleAmplitude + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 (1) + * + * (1) On this STM32 serie, parameter not available on all devices. + * Refer to device datasheet for channels availability. + * @param TriangleAmplitude This parameter can be one of the following values: + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_3 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_7 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_15 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_31 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_63 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_127 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_255 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_511 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1023 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_2047 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_4095 + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetWaveTriangleAmplitude(DAC_TypeDef *DACx, uint32_t DAC_Channel, + uint32_t TriangleAmplitude) +{ + MODIFY_REG(DACx->CR, + DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + TriangleAmplitude << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get the triangle waveform generation for the selected DAC channel: + * triangle mode and amplitude. + * @rmtoll CR MAMP1 LL_DAC_GetWaveTriangleAmplitude\n + * CR MAMP2 LL_DAC_GetWaveTriangleAmplitude + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 (1) + * + * (1) On this STM32 serie, parameter not available on all devices. + * Refer to device datasheet for channels availability. + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_3 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_7 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_15 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_31 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_63 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_127 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_255 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_511 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1023 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_2047 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_4095 + */ +__STATIC_INLINE uint32_t LL_DAC_GetWaveTriangleAmplitude(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); +} + +/** + * @brief Set the output buffer for the selected DAC channel. + * @rmtoll CR BOFF1 LL_DAC_SetOutputBuffer\n + * CR BOFF2 LL_DAC_SetOutputBuffer + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 (1) + * + * (1) On this STM32 serie, parameter not available on all devices. + * Refer to device datasheet for channels availability. + * @param OutputBuffer This parameter can be one of the following values: + * @arg @ref LL_DAC_OUTPUT_BUFFER_ENABLE + * @arg @ref LL_DAC_OUTPUT_BUFFER_DISABLE + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetOutputBuffer(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t OutputBuffer) +{ + MODIFY_REG(DACx->CR, + DAC_CR_BOFF1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + OutputBuffer << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get the output buffer state for the selected DAC channel. + * @rmtoll CR BOFF1 LL_DAC_GetOutputBuffer\n + * CR BOFF2 LL_DAC_GetOutputBuffer + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 (1) + * + * (1) On this STM32 serie, parameter not available on all devices. + * Refer to device datasheet for channels availability. + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_OUTPUT_BUFFER_ENABLE + * @arg @ref LL_DAC_OUTPUT_BUFFER_DISABLE + */ +__STATIC_INLINE uint32_t LL_DAC_GetOutputBuffer(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_BOFF1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); +} + +/** + * @} + */ + +/** @defgroup DAC_LL_EF_DMA_Management DMA Management + * @{ + */ + +/** + * @brief Enable DAC DMA transfer request of the selected channel. + * @note To configure DMA source address (peripheral address), + * use function @ref LL_DAC_DMA_GetRegAddr(). + * @rmtoll CR DMAEN1 LL_DAC_EnableDMAReq\n + * CR DMAEN2 LL_DAC_EnableDMAReq + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 (1) + * + * (1) On this STM32 serie, parameter not available on all devices. + * Refer to device datasheet for channels availability. + * @retval None + */ +__STATIC_INLINE void LL_DAC_EnableDMAReq(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + SET_BIT(DACx->CR, + DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Disable DAC DMA transfer request of the selected channel. + * @note To configure DMA source address (peripheral address), + * use function @ref LL_DAC_DMA_GetRegAddr(). + * @rmtoll CR DMAEN1 LL_DAC_DisableDMAReq\n + * CR DMAEN2 LL_DAC_DisableDMAReq + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 (1) + * + * (1) On this STM32 serie, parameter not available on all devices. + * Refer to device datasheet for channels availability. + * @retval None + */ +__STATIC_INLINE void LL_DAC_DisableDMAReq(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + CLEAR_BIT(DACx->CR, + DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get DAC DMA transfer request state of the selected channel. + * (0: DAC DMA transfer request is disabled, 1: DAC DMA transfer request is enabled) + * @rmtoll CR DMAEN1 LL_DAC_IsDMAReqEnabled\n + * CR DMAEN2 LL_DAC_IsDMAReqEnabled + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 (1) + * + * (1) On this STM32 serie, parameter not available on all devices. + * Refer to device datasheet for channels availability. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsDMAReqEnabled(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return ((READ_BIT(DACx->CR, + DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + == (DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))) ? 1UL : 0UL); +} + +/** + * @brief Function to help to configure DMA transfer to DAC: retrieve the + * DAC register address from DAC instance and a list of DAC registers + * intended to be used (most commonly) with DMA transfer. + * @note These DAC registers are data holding registers: + * when DAC conversion is requested, DAC generates a DMA transfer + * request to have data available in DAC data holding registers. + * @note This macro is intended to be used with LL DMA driver, refer to + * function "LL_DMA_ConfigAddresses()". + * Example: + * LL_DMA_ConfigAddresses(DMA1, + * LL_DMA_CHANNEL_1, + * (uint32_t)&< array or variable >, + * LL_DAC_DMA_GetRegAddr(DAC1, LL_DAC_CHANNEL_1, + * LL_DAC_DMA_REG_DATA_12BITS_RIGHT_ALIGNED), + * LL_DMA_DIRECTION_MEMORY_TO_PERIPH); + * @rmtoll DHR12R1 DACC1DHR LL_DAC_DMA_GetRegAddr\n + * DHR12L1 DACC1DHR LL_DAC_DMA_GetRegAddr\n + * DHR8R1 DACC1DHR LL_DAC_DMA_GetRegAddr\n + * DHR12R2 DACC2DHR LL_DAC_DMA_GetRegAddr\n + * DHR12L2 DACC2DHR LL_DAC_DMA_GetRegAddr\n + * DHR8R2 DACC2DHR LL_DAC_DMA_GetRegAddr + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 (1) + * + * (1) On this STM32 serie, parameter not available on all devices. + * Refer to device datasheet for channels availability. + * @param Register This parameter can be one of the following values: + * @arg @ref LL_DAC_DMA_REG_DATA_12BITS_RIGHT_ALIGNED + * @arg @ref LL_DAC_DMA_REG_DATA_12BITS_LEFT_ALIGNED + * @arg @ref LL_DAC_DMA_REG_DATA_8BITS_RIGHT_ALIGNED + * @retval DAC register address + */ +__STATIC_INLINE uint32_t LL_DAC_DMA_GetRegAddr(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Register) +{ + /* Retrieve address of register DHR12Rx, DHR12Lx or DHR8Rx depending on */ + /* DAC channel selected. */ + return ((uint32_t)(__DAC_PTR_REG_OFFSET((DACx)->DHR12R1, ((DAC_Channel >> (Register & 0x1FUL)) + & DAC_REG_DHR_REGOFFSET_MASK_POSBIT0)))); +} +/** + * @} + */ + +/** @defgroup DAC_LL_EF_Operation Operation on DAC channels + * @{ + */ + +/** + * @brief Enable DAC selected channel. + * @rmtoll CR EN1 LL_DAC_Enable\n + * CR EN2 LL_DAC_Enable + * @note After enable from off state, DAC channel requires a delay + * for output voltage to reach accuracy +/- 1 LSB. + * Refer to device datasheet, parameter "tWAKEUP". + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 (1) + * + * (1) On this STM32 serie, parameter not available on all devices. + * Refer to device datasheet for channels availability. + * @retval None + */ +__STATIC_INLINE void LL_DAC_Enable(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + SET_BIT(DACx->CR, + DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Disable DAC selected channel. + * @rmtoll CR EN1 LL_DAC_Disable\n + * CR EN2 LL_DAC_Disable + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 (1) + * + * (1) On this STM32 serie, parameter not available on all devices. + * Refer to device datasheet for channels availability. + * @retval None + */ +__STATIC_INLINE void LL_DAC_Disable(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + CLEAR_BIT(DACx->CR, + DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get DAC enable state of the selected channel. + * (0: DAC channel is disabled, 1: DAC channel is enabled) + * @rmtoll CR EN1 LL_DAC_IsEnabled\n + * CR EN2 LL_DAC_IsEnabled + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 (1) + * + * (1) On this STM32 serie, parameter not available on all devices. + * Refer to device datasheet for channels availability. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsEnabled(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return ((READ_BIT(DACx->CR, + DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + == (DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))) ? 1UL : 0UL); +} + +/** + * @brief Enable DAC trigger of the selected channel. + * @note - If DAC trigger is disabled, DAC conversion is performed + * automatically once the data holding register is updated, + * using functions "LL_DAC_ConvertData{8; 12}{Right; Left} Aligned()": + * @ref LL_DAC_ConvertData12RightAligned(), ... + * - If DAC trigger is enabled, DAC conversion is performed + * only when a hardware of software trigger event is occurring. + * Select trigger source using + * function @ref LL_DAC_SetTriggerSource(). + * @rmtoll CR TEN1 LL_DAC_EnableTrigger\n + * CR TEN2 LL_DAC_EnableTrigger + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 (1) + * + * (1) On this STM32 serie, parameter not available on all devices. + * Refer to device datasheet for channels availability. + * @retval None + */ +__STATIC_INLINE void LL_DAC_EnableTrigger(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + SET_BIT(DACx->CR, + DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Disable DAC trigger of the selected channel. + * @rmtoll CR TEN1 LL_DAC_DisableTrigger\n + * CR TEN2 LL_DAC_DisableTrigger + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 (1) + * + * (1) On this STM32 serie, parameter not available on all devices. + * Refer to device datasheet for channels availability. + * @retval None + */ +__STATIC_INLINE void LL_DAC_DisableTrigger(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + CLEAR_BIT(DACx->CR, + DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get DAC trigger state of the selected channel. + * (0: DAC trigger is disabled, 1: DAC trigger is enabled) + * @rmtoll CR TEN1 LL_DAC_IsTriggerEnabled\n + * CR TEN2 LL_DAC_IsTriggerEnabled + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 (1) + * + * (1) On this STM32 serie, parameter not available on all devices. + * Refer to device datasheet for channels availability. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsTriggerEnabled(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return ((READ_BIT(DACx->CR, + DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + == (DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))) ? 1UL : 0UL); +} + +/** + * @brief Trig DAC conversion by software for the selected DAC channel. + * @note Preliminarily, DAC trigger must be set to software trigger + * using function + * @ref LL_DAC_Init() + * @ref LL_DAC_SetTriggerSource() + * with parameter "LL_DAC_TRIGGER_SOFTWARE". + * and DAC trigger must be enabled using + * function @ref LL_DAC_EnableTrigger(). + * @note For devices featuring DAC with 2 channels: this function + * can perform a SW start of both DAC channels simultaneously. + * Two channels can be selected as parameter. + * Example: (LL_DAC_CHANNEL_1 | LL_DAC_CHANNEL_2) + * @rmtoll SWTRIGR SWTRIG1 LL_DAC_TrigSWConversion\n + * SWTRIGR SWTRIG2 LL_DAC_TrigSWConversion + * @param DACx DAC instance + * @param DAC_Channel This parameter can a combination of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 (1) + * + * (1) On this STM32 serie, parameter not available on all devices. + * Refer to device datasheet for channels availability. + * @retval None + */ +__STATIC_INLINE void LL_DAC_TrigSWConversion(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + SET_BIT(DACx->SWTRIGR, + (DAC_Channel & DAC_SWTR_CHX_MASK)); +} + +/** + * @brief Set the data to be loaded in the data holding register + * in format 12 bits left alignment (LSB aligned on bit 0), + * for the selected DAC channel. + * @rmtoll DHR12R1 DACC1DHR LL_DAC_ConvertData12RightAligned\n + * DHR12R2 DACC2DHR LL_DAC_ConvertData12RightAligned + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 (1) + * + * (1) On this STM32 serie, parameter not available on all devices. + * Refer to device datasheet for channels availability. + * @param Data Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval None + */ +__STATIC_INLINE void LL_DAC_ConvertData12RightAligned(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Data) +{ + __IO uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DHR12R1, (DAC_Channel >> DAC_REG_DHR12RX_REGOFFSET_BITOFFSET_POS) + & DAC_REG_DHR_REGOFFSET_MASK_POSBIT0); + + MODIFY_REG(*preg, DAC_DHR12R1_DACC1DHR, Data); +} + +/** + * @brief Set the data to be loaded in the data holding register + * in format 12 bits left alignment (MSB aligned on bit 15), + * for the selected DAC channel. + * @rmtoll DHR12L1 DACC1DHR LL_DAC_ConvertData12LeftAligned\n + * DHR12L2 DACC2DHR LL_DAC_ConvertData12LeftAligned + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 (1) + * + * (1) On this STM32 serie, parameter not available on all devices. + * Refer to device datasheet for channels availability. + * @param Data Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval None + */ +__STATIC_INLINE void LL_DAC_ConvertData12LeftAligned(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Data) +{ + __IO uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DHR12R1, (DAC_Channel >> DAC_REG_DHR12LX_REGOFFSET_BITOFFSET_POS) + & DAC_REG_DHR_REGOFFSET_MASK_POSBIT0); + + MODIFY_REG(*preg, DAC_DHR12L1_DACC1DHR, Data); +} + +/** + * @brief Set the data to be loaded in the data holding register + * in format 8 bits left alignment (LSB aligned on bit 0), + * for the selected DAC channel. + * @rmtoll DHR8R1 DACC1DHR LL_DAC_ConvertData8RightAligned\n + * DHR8R2 DACC2DHR LL_DAC_ConvertData8RightAligned + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 (1) + * + * (1) On this STM32 serie, parameter not available on all devices. + * Refer to device datasheet for channels availability. + * @param Data Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_DAC_ConvertData8RightAligned(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Data) +{ + __IO uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DHR12R1, (DAC_Channel >> DAC_REG_DHR8RX_REGOFFSET_BITOFFSET_POS) + & DAC_REG_DHR_REGOFFSET_MASK_POSBIT0); + + MODIFY_REG(*preg, DAC_DHR8R1_DACC1DHR, Data); +} + +#if defined(DAC_CHANNEL2_SUPPORT) +/** + * @brief Set the data to be loaded in the data holding register + * in format 12 bits left alignment (LSB aligned on bit 0), + * for both DAC channels. + * @rmtoll DHR12RD DACC1DHR LL_DAC_ConvertDualData12RightAligned\n + * DHR12RD DACC2DHR LL_DAC_ConvertDualData12RightAligned + * @param DACx DAC instance + * @param DataChannel1 Value between Min_Data=0x000 and Max_Data=0xFFF + * @param DataChannel2 Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval None + */ +__STATIC_INLINE void LL_DAC_ConvertDualData12RightAligned(DAC_TypeDef *DACx, uint32_t DataChannel1, + uint32_t DataChannel2) +{ + MODIFY_REG(DACx->DHR12RD, + (DAC_DHR12RD_DACC2DHR | DAC_DHR12RD_DACC1DHR), + ((DataChannel2 << DAC_DHR12RD_DACC2DHR_BITOFFSET_POS) | DataChannel1)); +} + +/** + * @brief Set the data to be loaded in the data holding register + * in format 12 bits left alignment (MSB aligned on bit 15), + * for both DAC channels. + * @rmtoll DHR12LD DACC1DHR LL_DAC_ConvertDualData12LeftAligned\n + * DHR12LD DACC2DHR LL_DAC_ConvertDualData12LeftAligned + * @param DACx DAC instance + * @param DataChannel1 Value between Min_Data=0x000 and Max_Data=0xFFF + * @param DataChannel2 Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval None + */ +__STATIC_INLINE void LL_DAC_ConvertDualData12LeftAligned(DAC_TypeDef *DACx, uint32_t DataChannel1, + uint32_t DataChannel2) +{ + /* Note: Data of DAC channel 2 shift value subtracted of 4 because */ + /* data on 16 bits and DAC channel 2 bits field is on the 12 MSB, */ + /* the 4 LSB must be taken into account for the shift value. */ + MODIFY_REG(DACx->DHR12LD, + (DAC_DHR12LD_DACC2DHR | DAC_DHR12LD_DACC1DHR), + ((DataChannel2 << (DAC_DHR12LD_DACC2DHR_BITOFFSET_POS - 4U)) | DataChannel1)); +} + +/** + * @brief Set the data to be loaded in the data holding register + * in format 8 bits left alignment (LSB aligned on bit 0), + * for both DAC channels. + * @rmtoll DHR8RD DACC1DHR LL_DAC_ConvertDualData8RightAligned\n + * DHR8RD DACC2DHR LL_DAC_ConvertDualData8RightAligned + * @param DACx DAC instance + * @param DataChannel1 Value between Min_Data=0x00 and Max_Data=0xFF + * @param DataChannel2 Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_DAC_ConvertDualData8RightAligned(DAC_TypeDef *DACx, uint32_t DataChannel1, + uint32_t DataChannel2) +{ + MODIFY_REG(DACx->DHR8RD, + (DAC_DHR8RD_DACC2DHR | DAC_DHR8RD_DACC1DHR), + ((DataChannel2 << DAC_DHR8RD_DACC2DHR_BITOFFSET_POS) | DataChannel1)); +} +#endif /* DAC_CHANNEL2_SUPPORT */ + +/** + * @brief Retrieve output data currently generated for the selected DAC channel. + * @note Whatever alignment and resolution settings + * (using functions "LL_DAC_ConvertData{8; 12}{Right; Left} Aligned()": + * @ref LL_DAC_ConvertData12RightAligned(), ...), + * output data format is 12 bits right aligned (LSB aligned on bit 0). + * @rmtoll DOR1 DACC1DOR LL_DAC_RetrieveOutputData\n + * DOR2 DACC2DOR LL_DAC_RetrieveOutputData + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @arg @ref LL_DAC_CHANNEL_2 (1) + * + * (1) On this STM32 serie, parameter not available on all devices. + * Refer to device datasheet for channels availability. + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_DAC_RetrieveOutputData(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + __IO uint32_t const *preg = __DAC_PTR_REG_OFFSET(DACx->DOR1, (DAC_Channel >> DAC_REG_DORX_REGOFFSET_BITOFFSET_POS) + & DAC_REG_DORX_REGOFFSET_MASK_POSBIT0); + + return (uint16_t) READ_BIT(*preg, DAC_DOR1_DACC1DOR); +} + +/** + * @} + */ + +/** @defgroup DAC_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Get DAC underrun flag for DAC channel 1 + * @rmtoll SR DMAUDR1 LL_DAC_IsActiveFlag_DMAUDR1 + * @param DACx DAC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsActiveFlag_DMAUDR1(DAC_TypeDef *DACx) +{ + return ((READ_BIT(DACx->SR, LL_DAC_FLAG_DMAUDR1) == (LL_DAC_FLAG_DMAUDR1)) ? 1UL : 0UL); +} + +#if defined(DAC_CHANNEL2_SUPPORT) +/** + * @brief Get DAC underrun flag for DAC channel 2 + * @rmtoll SR DMAUDR2 LL_DAC_IsActiveFlag_DMAUDR2 + * @param DACx DAC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsActiveFlag_DMAUDR2(DAC_TypeDef *DACx) +{ + return ((READ_BIT(DACx->SR, LL_DAC_FLAG_DMAUDR2) == (LL_DAC_FLAG_DMAUDR2)) ? 1UL : 0UL); +} +#endif /* DAC_CHANNEL2_SUPPORT */ + +/** + * @brief Clear DAC underrun flag for DAC channel 1 + * @rmtoll SR DMAUDR1 LL_DAC_ClearFlag_DMAUDR1 + * @param DACx DAC instance + * @retval None + */ +__STATIC_INLINE void LL_DAC_ClearFlag_DMAUDR1(DAC_TypeDef *DACx) +{ + WRITE_REG(DACx->SR, LL_DAC_FLAG_DMAUDR1); +} + +#if defined(DAC_CHANNEL2_SUPPORT) +/** + * @brief Clear DAC underrun flag for DAC channel 2 + * @rmtoll SR DMAUDR2 LL_DAC_ClearFlag_DMAUDR2 + * @param DACx DAC instance + * @retval None + */ +__STATIC_INLINE void LL_DAC_ClearFlag_DMAUDR2(DAC_TypeDef *DACx) +{ + WRITE_REG(DACx->SR, LL_DAC_FLAG_DMAUDR2); +} +#endif /* DAC_CHANNEL2_SUPPORT */ + +/** + * @} + */ + +/** @defgroup DAC_LL_EF_IT_Management IT management + * @{ + */ + +/** + * @brief Enable DMA underrun interrupt for DAC channel 1 + * @rmtoll CR DMAUDRIE1 LL_DAC_EnableIT_DMAUDR1 + * @param DACx DAC instance + * @retval None + */ +__STATIC_INLINE void LL_DAC_EnableIT_DMAUDR1(DAC_TypeDef *DACx) +{ + SET_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE1); +} + +#if defined(DAC_CHANNEL2_SUPPORT) +/** + * @brief Enable DMA underrun interrupt for DAC channel 2 + * @rmtoll CR DMAUDRIE2 LL_DAC_EnableIT_DMAUDR2 + * @param DACx DAC instance + * @retval None + */ +__STATIC_INLINE void LL_DAC_EnableIT_DMAUDR2(DAC_TypeDef *DACx) +{ + SET_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE2); +} +#endif /* DAC_CHANNEL2_SUPPORT */ + +/** + * @brief Disable DMA underrun interrupt for DAC channel 1 + * @rmtoll CR DMAUDRIE1 LL_DAC_DisableIT_DMAUDR1 + * @param DACx DAC instance + * @retval None + */ +__STATIC_INLINE void LL_DAC_DisableIT_DMAUDR1(DAC_TypeDef *DACx) +{ + CLEAR_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE1); +} + +#if defined(DAC_CHANNEL2_SUPPORT) +/** + * @brief Disable DMA underrun interrupt for DAC channel 2 + * @rmtoll CR DMAUDRIE2 LL_DAC_DisableIT_DMAUDR2 + * @param DACx DAC instance + * @retval None + */ +__STATIC_INLINE void LL_DAC_DisableIT_DMAUDR2(DAC_TypeDef *DACx) +{ + CLEAR_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE2); +} +#endif /* DAC_CHANNEL2_SUPPORT */ + +/** + * @brief Get DMA underrun interrupt for DAC channel 1 + * @rmtoll CR DMAUDRIE1 LL_DAC_IsEnabledIT_DMAUDR1 + * @param DACx DAC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsEnabledIT_DMAUDR1(DAC_TypeDef *DACx) +{ + return ((READ_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE1) == (LL_DAC_IT_DMAUDRIE1)) ? 1UL : 0UL); +} + +#if defined(DAC_CHANNEL2_SUPPORT) +/** + * @brief Get DMA underrun interrupt for DAC channel 2 + * @rmtoll CR DMAUDRIE2 LL_DAC_IsEnabledIT_DMAUDR2 + * @param DACx DAC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsEnabledIT_DMAUDR2(DAC_TypeDef *DACx) +{ + return ((READ_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE2) == (LL_DAC_IT_DMAUDRIE2)) ? 1UL : 0UL); +} +#endif /* DAC_CHANNEL2_SUPPORT */ + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DAC_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_DAC_DeInit(DAC_TypeDef *DACx); +ErrorStatus LL_DAC_Init(DAC_TypeDef *DACx, uint32_t DAC_Channel, LL_DAC_InitTypeDef *DAC_InitStruct); +void LL_DAC_StructInit(LL_DAC_InitTypeDef *DAC_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DAC */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32F4xx_LL_DAC_H */ + diff --git a/Drivers/stm32f4xx_ll_dma.h b/libs/hal/stm32f4xx_ll_dma.h similarity index 97% rename from Drivers/stm32f4xx_ll_dma.h rename to libs/hal/stm32f4xx_ll_dma.h index c04ac76..76444fc 100644 --- a/Drivers/stm32f4xx_ll_dma.h +++ b/libs/hal/stm32f4xx_ll_dma.h @@ -1,2868 +1,2868 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_dma.h - * @author MCD Application Team - * @brief Header file of DMA LL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_DMA_H -#define __STM32F4xx_LL_DMA_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined (DMA1) || defined (DMA2) - -/** @defgroup DMA_LL DMA - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @defgroup DMA_LL_Private_Variables DMA Private Variables - * @{ - */ -/* Array used to get the DMA stream register offset versus stream index LL_DMA_STREAM_x */ -static const uint8_t STREAM_OFFSET_TAB[] = -{ - (uint8_t)(DMA1_Stream0_BASE - DMA1_BASE), - (uint8_t)(DMA1_Stream1_BASE - DMA1_BASE), - (uint8_t)(DMA1_Stream2_BASE - DMA1_BASE), - (uint8_t)(DMA1_Stream3_BASE - DMA1_BASE), - (uint8_t)(DMA1_Stream4_BASE - DMA1_BASE), - (uint8_t)(DMA1_Stream5_BASE - DMA1_BASE), - (uint8_t)(DMA1_Stream6_BASE - DMA1_BASE), - (uint8_t)(DMA1_Stream7_BASE - DMA1_BASE) -}; - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup DMA_LL_Private_Constants DMA Private Constants - * @{ - */ -/** - * @} - */ - - -/* Private macros ------------------------------------------------------------*/ -/* Exported types ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup DMA_LL_ES_INIT DMA Exported Init structure - * @{ - */ -typedef struct -{ - uint32_t PeriphOrM2MSrcAddress; /*!< Specifies the peripheral base address for DMA transfer - or as Source base address in case of memory to memory transfer direction. - - This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ - - uint32_t MemoryOrM2MDstAddress; /*!< Specifies the memory base address for DMA transfer - or as Destination base address in case of memory to memory transfer direction. - - This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ - - uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, - from memory to memory or from peripheral to memory. - This parameter can be a value of @ref DMA_LL_EC_DIRECTION - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataTransferDirection(). */ - - uint32_t Mode; /*!< Specifies the normal or circular operation mode. - This parameter can be a value of @ref DMA_LL_EC_MODE - @note The circular buffer mode cannot be used if the memory to memory - data transfer direction is configured on the selected Stream - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetMode(). */ - - uint32_t PeriphOrM2MSrcIncMode; /*!< Specifies whether the Peripheral address or Source address in case of memory to memory transfer direction - is incremented or not. - This parameter can be a value of @ref DMA_LL_EC_PERIPH - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphIncMode(). */ - - uint32_t MemoryOrM2MDstIncMode; /*!< Specifies whether the Memory address or Destination address in case of memory to memory transfer direction - is incremented or not. - This parameter can be a value of @ref DMA_LL_EC_MEMORY - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryIncMode(). */ - - uint32_t PeriphOrM2MSrcDataSize; /*!< Specifies the Peripheral data size alignment or Source data size alignment (byte, half word, word) - in case of memory to memory transfer direction. - This parameter can be a value of @ref DMA_LL_EC_PDATAALIGN - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphSize(). */ - - uint32_t MemoryOrM2MDstDataSize; /*!< Specifies the Memory data size alignment or Destination data size alignment (byte, half word, word) - in case of memory to memory transfer direction. - This parameter can be a value of @ref DMA_LL_EC_MDATAALIGN - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemorySize(). */ - - uint32_t NbData; /*!< Specifies the number of data to transfer, in data unit. - The data unit is equal to the source buffer configuration set in PeripheralSize - or MemorySize parameters depending in the transfer direction. - This parameter must be a value between Min_Data = 0 and Max_Data = 0x0000FFFF - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataLength(). */ - - uint32_t Channel; /*!< Specifies the peripheral channel. - This parameter can be a value of @ref DMA_LL_EC_CHANNEL - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetChannelSelection(). */ - - uint32_t Priority; /*!< Specifies the channel priority level. - This parameter can be a value of @ref DMA_LL_EC_PRIORITY - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetStreamPriorityLevel(). */ - - uint32_t FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream. - This parameter can be a value of @ref DMA_LL_FIFOMODE - @note The Direct mode (FIFO mode disabled) cannot be used if the - memory-to-memory data transfer is configured on the selected stream - - This feature can be modified afterwards using unitary functions @ref LL_DMA_EnableFifoMode() or @ref LL_DMA_EnableFifoMode() . */ - - uint32_t FIFOThreshold; /*!< Specifies the FIFO threshold level. - This parameter can be a value of @ref DMA_LL_EC_FIFOTHRESHOLD - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetFIFOThreshold(). */ - - uint32_t MemBurst; /*!< Specifies the Burst transfer configuration for the memory transfers. - It specifies the amount of data to be transferred in a single non interruptible - transaction. - This parameter can be a value of @ref DMA_LL_EC_MBURST - @note The burst mode is possible only if the address Increment mode is enabled. - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryBurstxfer(). */ - - uint32_t PeriphBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers. - It specifies the amount of data to be transferred in a single non interruptible - transaction. - This parameter can be a value of @ref DMA_LL_EC_PBURST - @note The burst mode is possible only if the address Increment mode is enabled. - - This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphBurstxfer(). */ - -} LL_DMA_InitTypeDef; -/** - * @} - */ -#endif /*USE_FULL_LL_DRIVER*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup DMA_LL_Exported_Constants DMA Exported Constants - * @{ - */ - -/** @defgroup DMA_LL_EC_STREAM STREAM - * @{ - */ -#define LL_DMA_STREAM_0 0x00000000U -#define LL_DMA_STREAM_1 0x00000001U -#define LL_DMA_STREAM_2 0x00000002U -#define LL_DMA_STREAM_3 0x00000003U -#define LL_DMA_STREAM_4 0x00000004U -#define LL_DMA_STREAM_5 0x00000005U -#define LL_DMA_STREAM_6 0x00000006U -#define LL_DMA_STREAM_7 0x00000007U -#define LL_DMA_STREAM_ALL 0xFFFF0000U -/** - * @} - */ - -/** @defgroup DMA_LL_EC_DIRECTION DIRECTION - * @{ - */ -#define LL_DMA_DIRECTION_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ -#define LL_DMA_DIRECTION_MEMORY_TO_PERIPH DMA_SxCR_DIR_0 /*!< Memory to peripheral direction */ -#define LL_DMA_DIRECTION_MEMORY_TO_MEMORY DMA_SxCR_DIR_1 /*!< Memory to memory direction */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_MODE MODE - * @{ - */ -#define LL_DMA_MODE_NORMAL 0x00000000U /*!< Normal Mode */ -#define LL_DMA_MODE_CIRCULAR DMA_SxCR_CIRC /*!< Circular Mode */ -#define LL_DMA_MODE_PFCTRL DMA_SxCR_PFCTRL /*!< Peripheral flow control mode */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_DOUBLEBUFFER_MODE DOUBLEBUFFER MODE - * @{ - */ -#define LL_DMA_DOUBLEBUFFER_MODE_DISABLE 0x00000000U /*!< Disable double buffering mode */ -#define LL_DMA_DOUBLEBUFFER_MODE_ENABLE DMA_SxCR_DBM /*!< Enable double buffering mode */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_PERIPH PERIPH - * @{ - */ -#define LL_DMA_PERIPH_NOINCREMENT 0x00000000U /*!< Peripheral increment mode Disable */ -#define LL_DMA_PERIPH_INCREMENT DMA_SxCR_PINC /*!< Peripheral increment mode Enable */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_MEMORY MEMORY - * @{ - */ -#define LL_DMA_MEMORY_NOINCREMENT 0x00000000U /*!< Memory increment mode Disable */ -#define LL_DMA_MEMORY_INCREMENT DMA_SxCR_MINC /*!< Memory increment mode Enable */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_PDATAALIGN PDATAALIGN - * @{ - */ -#define LL_DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment : Byte */ -#define LL_DMA_PDATAALIGN_HALFWORD DMA_SxCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */ -#define LL_DMA_PDATAALIGN_WORD DMA_SxCR_PSIZE_1 /*!< Peripheral data alignment : Word */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_MDATAALIGN MDATAALIGN - * @{ - */ -#define LL_DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment : Byte */ -#define LL_DMA_MDATAALIGN_HALFWORD DMA_SxCR_MSIZE_0 /*!< Memory data alignment : HalfWord */ -#define LL_DMA_MDATAALIGN_WORD DMA_SxCR_MSIZE_1 /*!< Memory data alignment : Word */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_OFFSETSIZE OFFSETSIZE - * @{ - */ -#define LL_DMA_OFFSETSIZE_PSIZE 0x00000000U /*!< Peripheral increment offset size is linked to the PSIZE */ -#define LL_DMA_OFFSETSIZE_FIXEDTO4 DMA_SxCR_PINCOS /*!< Peripheral increment offset size is fixed to 4 (32-bit alignment) */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_PRIORITY PRIORITY - * @{ - */ -#define LL_DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */ -#define LL_DMA_PRIORITY_MEDIUM DMA_SxCR_PL_0 /*!< Priority level : Medium */ -#define LL_DMA_PRIORITY_HIGH DMA_SxCR_PL_1 /*!< Priority level : High */ -#define LL_DMA_PRIORITY_VERYHIGH DMA_SxCR_PL /*!< Priority level : Very_High */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_CHANNEL CHANNEL - * @{ - */ -#define LL_DMA_CHANNEL_0 0x00000000U /* Select Channel0 of DMA Instance */ -#define LL_DMA_CHANNEL_1 DMA_SxCR_CHSEL_0 /* Select Channel1 of DMA Instance */ -#define LL_DMA_CHANNEL_2 DMA_SxCR_CHSEL_1 /* Select Channel2 of DMA Instance */ -#define LL_DMA_CHANNEL_3 (DMA_SxCR_CHSEL_0 | DMA_SxCR_CHSEL_1) /* Select Channel3 of DMA Instance */ -#define LL_DMA_CHANNEL_4 DMA_SxCR_CHSEL_2 /* Select Channel4 of DMA Instance */ -#define LL_DMA_CHANNEL_5 (DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_0) /* Select Channel5 of DMA Instance */ -#define LL_DMA_CHANNEL_6 (DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1) /* Select Channel6 of DMA Instance */ -#define LL_DMA_CHANNEL_7 (DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1 | DMA_SxCR_CHSEL_0) /* Select Channel7 of DMA Instance */ -#if defined (DMA_SxCR_CHSEL_3) -#define LL_DMA_CHANNEL_8 DMA_SxCR_CHSEL_3 /* Select Channel8 of DMA Instance */ -#define LL_DMA_CHANNEL_9 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_0) /* Select Channel9 of DMA Instance */ -#define LL_DMA_CHANNEL_10 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_1) /* Select Channel10 of DMA Instance */ -#define LL_DMA_CHANNEL_11 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_1 | DMA_SxCR_CHSEL_0) /* Select Channel11 of DMA Instance */ -#define LL_DMA_CHANNEL_12 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_2) /* Select Channel12 of DMA Instance */ -#define LL_DMA_CHANNEL_13 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_0) /* Select Channel13 of DMA Instance */ -#define LL_DMA_CHANNEL_14 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1) /* Select Channel14 of DMA Instance */ -#define LL_DMA_CHANNEL_15 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1 | DMA_SxCR_CHSEL_0) /* Select Channel15 of DMA Instance */ -#endif /* DMA_SxCR_CHSEL_3 */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_MBURST MBURST - * @{ - */ -#define LL_DMA_MBURST_SINGLE 0x00000000U /*!< Memory burst single transfer configuration */ -#define LL_DMA_MBURST_INC4 DMA_SxCR_MBURST_0 /*!< Memory burst of 4 beats transfer configuration */ -#define LL_DMA_MBURST_INC8 DMA_SxCR_MBURST_1 /*!< Memory burst of 8 beats transfer configuration */ -#define LL_DMA_MBURST_INC16 (DMA_SxCR_MBURST_0 | DMA_SxCR_MBURST_1) /*!< Memory burst of 16 beats transfer configuration */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_PBURST PBURST - * @{ - */ -#define LL_DMA_PBURST_SINGLE 0x00000000U /*!< Peripheral burst single transfer configuration */ -#define LL_DMA_PBURST_INC4 DMA_SxCR_PBURST_0 /*!< Peripheral burst of 4 beats transfer configuration */ -#define LL_DMA_PBURST_INC8 DMA_SxCR_PBURST_1 /*!< Peripheral burst of 8 beats transfer configuration */ -#define LL_DMA_PBURST_INC16 (DMA_SxCR_PBURST_0 | DMA_SxCR_PBURST_1) /*!< Peripheral burst of 16 beats transfer configuration */ -/** - * @} - */ - -/** @defgroup DMA_LL_FIFOMODE DMA_LL_FIFOMODE - * @{ - */ -#define LL_DMA_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable (direct mode is enabled) */ -#define LL_DMA_FIFOMODE_ENABLE DMA_SxFCR_DMDIS /*!< FIFO mode enable */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_FIFOSTATUS_0 FIFOSTATUS 0 - * @{ - */ -#define LL_DMA_FIFOSTATUS_0_25 0x00000000U /*!< 0 < fifo_level < 1/4 */ -#define LL_DMA_FIFOSTATUS_25_50 DMA_SxFCR_FS_0 /*!< 1/4 < fifo_level < 1/2 */ -#define LL_DMA_FIFOSTATUS_50_75 DMA_SxFCR_FS_1 /*!< 1/2 < fifo_level < 3/4 */ -#define LL_DMA_FIFOSTATUS_75_100 (DMA_SxFCR_FS_1 | DMA_SxFCR_FS_0) /*!< 3/4 < fifo_level < full */ -#define LL_DMA_FIFOSTATUS_EMPTY DMA_SxFCR_FS_2 /*!< FIFO is empty */ -#define LL_DMA_FIFOSTATUS_FULL (DMA_SxFCR_FS_2 | DMA_SxFCR_FS_0) /*!< FIFO is full */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_FIFOTHRESHOLD FIFOTHRESHOLD - * @{ - */ -#define LL_DMA_FIFOTHRESHOLD_1_4 0x00000000U /*!< FIFO threshold 1 quart full configuration */ -#define LL_DMA_FIFOTHRESHOLD_1_2 DMA_SxFCR_FTH_0 /*!< FIFO threshold half full configuration */ -#define LL_DMA_FIFOTHRESHOLD_3_4 DMA_SxFCR_FTH_1 /*!< FIFO threshold 3 quarts full configuration */ -#define LL_DMA_FIFOTHRESHOLD_FULL DMA_SxFCR_FTH /*!< FIFO threshold full configuration */ -/** - * @} - */ - -/** @defgroup DMA_LL_EC_CURRENTTARGETMEM CURRENTTARGETMEM - * @{ - */ -#define LL_DMA_CURRENTTARGETMEM0 0x00000000U /*!< Set CurrentTarget Memory to Memory 0 */ -#define LL_DMA_CURRENTTARGETMEM1 DMA_SxCR_CT /*!< Set CurrentTarget Memory to Memory 1 */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup DMA_LL_Exported_Macros DMA Exported Macros - * @{ - */ - -/** @defgroup DMA_LL_EM_WRITE_READ Common Write and read registers macros - * @{ - */ -/** - * @brief Write a value in DMA register - * @param __INSTANCE__ DMA Instance - * @param __REG__ Register to be written - * @param __VALUE__ Value to be written in the register - * @retval None - */ -#define LL_DMA_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) - -/** - * @brief Read a value in DMA register - * @param __INSTANCE__ DMA Instance - * @param __REG__ Register to be read - * @retval Register value - */ -#define LL_DMA_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) -/** - * @} - */ - -/** @defgroup DMA_LL_EM_CONVERT_DMAxCHANNELy Convert DMAxStreamy - * @{ - */ -/** - * @brief Convert DMAx_Streamy into DMAx - * @param __STREAM_INSTANCE__ DMAx_Streamy - * @retval DMAx - */ -#define __LL_DMA_GET_INSTANCE(__STREAM_INSTANCE__) \ -(((uint32_t)(__STREAM_INSTANCE__) > ((uint32_t)DMA1_Stream7)) ? DMA2 : DMA1) - -/** - * @brief Convert DMAx_Streamy into LL_DMA_STREAM_y - * @param __STREAM_INSTANCE__ DMAx_Streamy - * @retval LL_DMA_CHANNEL_y - */ -#define __LL_DMA_GET_STREAM(__STREAM_INSTANCE__) \ -(((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream0)) ? LL_DMA_STREAM_0 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream0)) ? LL_DMA_STREAM_0 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream1)) ? LL_DMA_STREAM_1 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream1)) ? LL_DMA_STREAM_1 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream2)) ? LL_DMA_STREAM_2 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream2)) ? LL_DMA_STREAM_2 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream3)) ? LL_DMA_STREAM_3 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream3)) ? LL_DMA_STREAM_3 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream4)) ? LL_DMA_STREAM_4 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream4)) ? LL_DMA_STREAM_4 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream5)) ? LL_DMA_STREAM_5 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream5)) ? LL_DMA_STREAM_5 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream6)) ? LL_DMA_STREAM_6 : \ - ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream6)) ? LL_DMA_STREAM_6 : \ - LL_DMA_STREAM_7) - -/** - * @brief Convert DMA Instance DMAx and LL_DMA_STREAM_y into DMAx_Streamy - * @param __DMA_INSTANCE__ DMAx - * @param __STREAM__ LL_DMA_STREAM_y - * @retval DMAx_Streamy - */ -#define __LL_DMA_GET_STREAM_INSTANCE(__DMA_INSTANCE__, __STREAM__) \ -((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_0))) ? DMA1_Stream0 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_0))) ? DMA2_Stream0 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_1))) ? DMA1_Stream1 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_1))) ? DMA2_Stream1 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_2))) ? DMA1_Stream2 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_2))) ? DMA2_Stream2 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_3))) ? DMA1_Stream3 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_3))) ? DMA2_Stream3 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_4))) ? DMA1_Stream4 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_4))) ? DMA2_Stream4 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_5))) ? DMA1_Stream5 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_5))) ? DMA2_Stream5 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_6))) ? DMA1_Stream6 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_6))) ? DMA2_Stream6 : \ - (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_7))) ? DMA1_Stream7 : \ - DMA2_Stream7) - -/** - * @} - */ - -/** - * @} - */ - - -/* Exported functions --------------------------------------------------------*/ - /** @defgroup DMA_LL_Exported_Functions DMA Exported Functions - * @{ - */ - -/** @defgroup DMA_LL_EF_Configuration Configuration - * @{ - */ -/** - * @brief Enable DMA stream. - * @rmtoll CR EN LL_DMA_EnableStream - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_EnableStream(DMA_TypeDef *DMAx, uint32_t Stream) -{ - SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_EN); -} - -/** - * @brief Disable DMA stream. - * @rmtoll CR EN LL_DMA_DisableStream - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_DisableStream(DMA_TypeDef *DMAx, uint32_t Stream) -{ - CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_EN); -} - -/** - * @brief Check if DMA stream is enabled or disabled. - * @rmtoll CR EN LL_DMA_IsEnabledStream - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsEnabledStream(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_EN) == (DMA_SxCR_EN)); -} - -/** - * @brief Configure all parameters linked to DMA transfer. - * @rmtoll CR DIR LL_DMA_ConfigTransfer\n - * CR CIRC LL_DMA_ConfigTransfer\n - * CR PINC LL_DMA_ConfigTransfer\n - * CR MINC LL_DMA_ConfigTransfer\n - * CR PSIZE LL_DMA_ConfigTransfer\n - * CR MSIZE LL_DMA_ConfigTransfer\n - * CR PL LL_DMA_ConfigTransfer\n - * CR PFCTRL LL_DMA_ConfigTransfer - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Configuration This parameter must be a combination of all the following values: - * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY or @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH or @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY - * @arg @ref LL_DMA_MODE_NORMAL or @ref LL_DMA_MODE_CIRCULAR or @ref LL_DMA_MODE_PFCTRL - * @arg @ref LL_DMA_PERIPH_INCREMENT or @ref LL_DMA_PERIPH_NOINCREMENT - * @arg @ref LL_DMA_MEMORY_INCREMENT or @ref LL_DMA_MEMORY_NOINCREMENT - * @arg @ref LL_DMA_PDATAALIGN_BYTE or @ref LL_DMA_PDATAALIGN_HALFWORD or @ref LL_DMA_PDATAALIGN_WORD - * @arg @ref LL_DMA_MDATAALIGN_BYTE or @ref LL_DMA_MDATAALIGN_HALFWORD or @ref LL_DMA_MDATAALIGN_WORD - * @arg @ref LL_DMA_PRIORITY_LOW or @ref LL_DMA_PRIORITY_MEDIUM or @ref LL_DMA_PRIORITY_HIGH or @ref LL_DMA_PRIORITY_VERYHIGH - *@retval None - */ -__STATIC_INLINE void LL_DMA_ConfigTransfer(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Configuration) -{ - MODIFY_REG(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, - DMA_SxCR_DIR | DMA_SxCR_CIRC | DMA_SxCR_PINC | DMA_SxCR_MINC | DMA_SxCR_PSIZE | DMA_SxCR_MSIZE | DMA_SxCR_PL | DMA_SxCR_PFCTRL, - Configuration); -} - -/** - * @brief Set Data transfer direction (read from peripheral or from memory). - * @rmtoll CR DIR LL_DMA_SetDataTransferDirection - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Direction This parameter can be one of the following values: - * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY - * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH - * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Direction) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DIR, Direction); -} - -/** - * @brief Get Data transfer direction (read from peripheral or from memory). - * @rmtoll CR DIR LL_DMA_GetDataTransferDirection - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY - * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH - * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY - */ -__STATIC_INLINE uint32_t LL_DMA_GetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DIR)); -} - -/** - * @brief Set DMA mode normal, circular or peripheral flow control. - * @rmtoll CR CIRC LL_DMA_SetMode\n - * CR PFCTRL LL_DMA_SetMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Mode This parameter can be one of the following values: - * @arg @ref LL_DMA_MODE_NORMAL - * @arg @ref LL_DMA_MODE_CIRCULAR - * @arg @ref LL_DMA_MODE_PFCTRL - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetMode(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Mode) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CIRC | DMA_SxCR_PFCTRL, Mode); -} - -/** - * @brief Get DMA mode normal, circular or peripheral flow control. - * @rmtoll CR CIRC LL_DMA_GetMode\n - * CR PFCTRL LL_DMA_GetMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_MODE_NORMAL - * @arg @ref LL_DMA_MODE_CIRCULAR - * @arg @ref LL_DMA_MODE_PFCTRL - */ -__STATIC_INLINE uint32_t LL_DMA_GetMode(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CIRC | DMA_SxCR_PFCTRL)); -} - -/** - * @brief Set Peripheral increment mode. - * @rmtoll CR PINC LL_DMA_SetPeriphIncMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param IncrementMode This parameter can be one of the following values: - * @arg @ref LL_DMA_PERIPH_NOINCREMENT - * @arg @ref LL_DMA_PERIPH_INCREMENT - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t IncrementMode) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PINC, IncrementMode); -} - -/** - * @brief Get Peripheral increment mode. - * @rmtoll CR PINC LL_DMA_GetPeriphIncMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_PERIPH_NOINCREMENT - * @arg @ref LL_DMA_PERIPH_INCREMENT - */ -__STATIC_INLINE uint32_t LL_DMA_GetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PINC)); -} - -/** - * @brief Set Memory increment mode. - * @rmtoll CR MINC LL_DMA_SetMemoryIncMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param IncrementMode This parameter can be one of the following values: - * @arg @ref LL_DMA_MEMORY_NOINCREMENT - * @arg @ref LL_DMA_MEMORY_INCREMENT - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t IncrementMode) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MINC, IncrementMode); -} - -/** - * @brief Get Memory increment mode. - * @rmtoll CR MINC LL_DMA_GetMemoryIncMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_MEMORY_NOINCREMENT - * @arg @ref LL_DMA_MEMORY_INCREMENT - */ -__STATIC_INLINE uint32_t LL_DMA_GetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MINC)); -} - -/** - * @brief Set Peripheral size. - * @rmtoll CR PSIZE LL_DMA_SetPeriphSize - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Size This parameter can be one of the following values: - * @arg @ref LL_DMA_PDATAALIGN_BYTE - * @arg @ref LL_DMA_PDATAALIGN_HALFWORD - * @arg @ref LL_DMA_PDATAALIGN_WORD - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetPeriphSize(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Size) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PSIZE, Size); -} - -/** - * @brief Get Peripheral size. - * @rmtoll CR PSIZE LL_DMA_GetPeriphSize - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_PDATAALIGN_BYTE - * @arg @ref LL_DMA_PDATAALIGN_HALFWORD - * @arg @ref LL_DMA_PDATAALIGN_WORD - */ -__STATIC_INLINE uint32_t LL_DMA_GetPeriphSize(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PSIZE)); -} - -/** - * @brief Set Memory size. - * @rmtoll CR MSIZE LL_DMA_SetMemorySize - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Size This parameter can be one of the following values: - * @arg @ref LL_DMA_MDATAALIGN_BYTE - * @arg @ref LL_DMA_MDATAALIGN_HALFWORD - * @arg @ref LL_DMA_MDATAALIGN_WORD - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetMemorySize(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Size) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MSIZE, Size); -} - -/** - * @brief Get Memory size. - * @rmtoll CR MSIZE LL_DMA_GetMemorySize - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_MDATAALIGN_BYTE - * @arg @ref LL_DMA_MDATAALIGN_HALFWORD - * @arg @ref LL_DMA_MDATAALIGN_WORD - */ -__STATIC_INLINE uint32_t LL_DMA_GetMemorySize(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MSIZE)); -} - -/** - * @brief Set Peripheral increment offset size. - * @rmtoll CR PINCOS LL_DMA_SetIncOffsetSize - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param OffsetSize This parameter can be one of the following values: - * @arg @ref LL_DMA_OFFSETSIZE_PSIZE - * @arg @ref LL_DMA_OFFSETSIZE_FIXEDTO4 - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetIncOffsetSize(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t OffsetSize) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PINCOS, OffsetSize); -} - -/** - * @brief Get Peripheral increment offset size. - * @rmtoll CR PINCOS LL_DMA_GetIncOffsetSize - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_OFFSETSIZE_PSIZE - * @arg @ref LL_DMA_OFFSETSIZE_FIXEDTO4 - */ -__STATIC_INLINE uint32_t LL_DMA_GetIncOffsetSize(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PINCOS)); -} - -/** - * @brief Set Stream priority level. - * @rmtoll CR PL LL_DMA_SetStreamPriorityLevel - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Priority This parameter can be one of the following values: - * @arg @ref LL_DMA_PRIORITY_LOW - * @arg @ref LL_DMA_PRIORITY_MEDIUM - * @arg @ref LL_DMA_PRIORITY_HIGH - * @arg @ref LL_DMA_PRIORITY_VERYHIGH - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetStreamPriorityLevel(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Priority) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PL, Priority); -} - -/** - * @brief Get Stream priority level. - * @rmtoll CR PL LL_DMA_GetStreamPriorityLevel - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_PRIORITY_LOW - * @arg @ref LL_DMA_PRIORITY_MEDIUM - * @arg @ref LL_DMA_PRIORITY_HIGH - * @arg @ref LL_DMA_PRIORITY_VERYHIGH - */ -__STATIC_INLINE uint32_t LL_DMA_GetStreamPriorityLevel(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PL)); -} - -/** - * @brief Set Number of data to transfer. - * @rmtoll NDTR NDT LL_DMA_SetDataLength - * @note This action has no effect if - * stream is enabled. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param NbData Between 0 to 0xFFFFFFFF - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetDataLength(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t NbData) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->NDTR, DMA_SxNDT, NbData); -} - -/** - * @brief Get Number of data to transfer. - * @rmtoll NDTR NDT LL_DMA_GetDataLength - * @note Once the stream is enabled, the return value indicate the - * remaining bytes to be transmitted. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Between 0 to 0xFFFFFFFF - */ -__STATIC_INLINE uint32_t LL_DMA_GetDataLength(DMA_TypeDef* DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->NDTR, DMA_SxNDT)); -} - -/** - * @brief Select Channel number associated to the Stream. - * @rmtoll CR CHSEL LL_DMA_SetChannelSelection - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_DMA_CHANNEL_0 - * @arg @ref LL_DMA_CHANNEL_1 - * @arg @ref LL_DMA_CHANNEL_2 - * @arg @ref LL_DMA_CHANNEL_3 - * @arg @ref LL_DMA_CHANNEL_4 - * @arg @ref LL_DMA_CHANNEL_5 - * @arg @ref LL_DMA_CHANNEL_6 - * @arg @ref LL_DMA_CHANNEL_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetChannelSelection(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Channel) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CHSEL, Channel); -} - -/** - * @brief Get the Channel number associated to the Stream. - * @rmtoll CR CHSEL LL_DMA_GetChannelSelection - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_CHANNEL_0 - * @arg @ref LL_DMA_CHANNEL_1 - * @arg @ref LL_DMA_CHANNEL_2 - * @arg @ref LL_DMA_CHANNEL_3 - * @arg @ref LL_DMA_CHANNEL_4 - * @arg @ref LL_DMA_CHANNEL_5 - * @arg @ref LL_DMA_CHANNEL_6 - * @arg @ref LL_DMA_CHANNEL_7 - */ -__STATIC_INLINE uint32_t LL_DMA_GetChannelSelection(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CHSEL)); -} - -/** - * @brief Set Memory burst transfer configuration. - * @rmtoll CR MBURST LL_DMA_SetMemoryBurstxfer - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Mburst This parameter can be one of the following values: - * @arg @ref LL_DMA_MBURST_SINGLE - * @arg @ref LL_DMA_MBURST_INC4 - * @arg @ref LL_DMA_MBURST_INC8 - * @arg @ref LL_DMA_MBURST_INC16 - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetMemoryBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Mburst) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MBURST, Mburst); -} - -/** - * @brief Get Memory burst transfer configuration. - * @rmtoll CR MBURST LL_DMA_GetMemoryBurstxfer - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_MBURST_SINGLE - * @arg @ref LL_DMA_MBURST_INC4 - * @arg @ref LL_DMA_MBURST_INC8 - * @arg @ref LL_DMA_MBURST_INC16 - */ -__STATIC_INLINE uint32_t LL_DMA_GetMemoryBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MBURST)); -} - -/** - * @brief Set Peripheral burst transfer configuration. - * @rmtoll CR PBURST LL_DMA_SetPeriphBurstxfer - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Pburst This parameter can be one of the following values: - * @arg @ref LL_DMA_PBURST_SINGLE - * @arg @ref LL_DMA_PBURST_INC4 - * @arg @ref LL_DMA_PBURST_INC8 - * @arg @ref LL_DMA_PBURST_INC16 - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetPeriphBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Pburst) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PBURST, Pburst); -} - -/** - * @brief Get Peripheral burst transfer configuration. - * @rmtoll CR PBURST LL_DMA_GetPeriphBurstxfer - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_PBURST_SINGLE - * @arg @ref LL_DMA_PBURST_INC4 - * @arg @ref LL_DMA_PBURST_INC8 - * @arg @ref LL_DMA_PBURST_INC16 - */ -__STATIC_INLINE uint32_t LL_DMA_GetPeriphBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PBURST)); -} - -/** - * @brief Set Current target (only in double buffer mode) to Memory 1 or Memory 0. - * @rmtoll CR CT LL_DMA_SetCurrentTargetMem - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param CurrentMemory This parameter can be one of the following values: - * @arg @ref LL_DMA_CURRENTTARGETMEM0 - * @arg @ref LL_DMA_CURRENTTARGETMEM1 - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetCurrentTargetMem(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t CurrentMemory) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CT, CurrentMemory); -} - -/** - * @brief Set Current target (only in double buffer mode) to Memory 1 or Memory 0. - * @rmtoll CR CT LL_DMA_GetCurrentTargetMem - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_CURRENTTARGETMEM0 - * @arg @ref LL_DMA_CURRENTTARGETMEM1 - */ -__STATIC_INLINE uint32_t LL_DMA_GetCurrentTargetMem(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CT)); -} - -/** - * @brief Enable the double buffer mode. - * @rmtoll CR DBM LL_DMA_EnableDoubleBufferMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_EnableDoubleBufferMode(DMA_TypeDef *DMAx, uint32_t Stream) -{ - SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DBM); -} - -/** - * @brief Disable the double buffer mode. - * @rmtoll CR DBM LL_DMA_DisableDoubleBufferMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_DisableDoubleBufferMode(DMA_TypeDef *DMAx, uint32_t Stream) -{ - CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DBM); -} - -/** - * @brief Get FIFO status. - * @rmtoll FCR FS LL_DMA_GetFIFOStatus - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_FIFOSTATUS_0_25 - * @arg @ref LL_DMA_FIFOSTATUS_25_50 - * @arg @ref LL_DMA_FIFOSTATUS_50_75 - * @arg @ref LL_DMA_FIFOSTATUS_75_100 - * @arg @ref LL_DMA_FIFOSTATUS_EMPTY - * @arg @ref LL_DMA_FIFOSTATUS_FULL - */ -__STATIC_INLINE uint32_t LL_DMA_GetFIFOStatus(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FS)); -} - -/** - * @brief Disable Fifo mode. - * @rmtoll FCR DMDIS LL_DMA_DisableFifoMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_DisableFifoMode(DMA_TypeDef *DMAx, uint32_t Stream) -{ - CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_DMDIS); -} - -/** - * @brief Enable Fifo mode. - * @rmtoll FCR DMDIS LL_DMA_EnableFifoMode - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_EnableFifoMode(DMA_TypeDef *DMAx, uint32_t Stream) -{ - SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_DMDIS); -} - -/** - * @brief Select FIFO threshold. - * @rmtoll FCR FTH LL_DMA_SetFIFOThreshold - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Threshold This parameter can be one of the following values: - * @arg @ref LL_DMA_FIFOTHRESHOLD_1_4 - * @arg @ref LL_DMA_FIFOTHRESHOLD_1_2 - * @arg @ref LL_DMA_FIFOTHRESHOLD_3_4 - * @arg @ref LL_DMA_FIFOTHRESHOLD_FULL - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetFIFOThreshold(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Threshold) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FTH, Threshold); -} - -/** - * @brief Get FIFO threshold. - * @rmtoll FCR FTH LL_DMA_GetFIFOThreshold - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_DMA_FIFOTHRESHOLD_1_4 - * @arg @ref LL_DMA_FIFOTHRESHOLD_1_2 - * @arg @ref LL_DMA_FIFOTHRESHOLD_3_4 - * @arg @ref LL_DMA_FIFOTHRESHOLD_FULL - */ -__STATIC_INLINE uint32_t LL_DMA_GetFIFOThreshold(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FTH)); -} - -/** - * @brief Configure the FIFO . - * @rmtoll FCR FTH LL_DMA_ConfigFifo\n - * FCR DMDIS LL_DMA_ConfigFifo - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param FifoMode This parameter can be one of the following values: - * @arg @ref LL_DMA_FIFOMODE_ENABLE - * @arg @ref LL_DMA_FIFOMODE_DISABLE - * @param FifoThreshold This parameter can be one of the following values: - * @arg @ref LL_DMA_FIFOTHRESHOLD_1_4 - * @arg @ref LL_DMA_FIFOTHRESHOLD_1_2 - * @arg @ref LL_DMA_FIFOTHRESHOLD_3_4 - * @arg @ref LL_DMA_FIFOTHRESHOLD_FULL - * @retval None - */ -__STATIC_INLINE void LL_DMA_ConfigFifo(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t FifoMode, uint32_t FifoThreshold) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FTH|DMA_SxFCR_DMDIS, FifoMode|FifoThreshold); -} - -/** - * @brief Configure the Source and Destination addresses. - * @note This API must not be called when the DMA stream is enabled. - * @rmtoll M0AR M0A LL_DMA_ConfigAddresses\n - * PAR PA LL_DMA_ConfigAddresses - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param SrcAddress Between 0 to 0xFFFFFFFF - * @param DstAddress Between 0 to 0xFFFFFFFF - * @param Direction This parameter can be one of the following values: - * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY - * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH - * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY - * @retval None - */ -__STATIC_INLINE void LL_DMA_ConfigAddresses(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t SrcAddress, uint32_t DstAddress, uint32_t Direction) -{ - /* Direction Memory to Periph */ - if (Direction == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) - { - WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR, SrcAddress); - WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR, DstAddress); - } - /* Direction Periph to Memory and Memory to Memory */ - else - { - WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR, SrcAddress); - WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR, DstAddress); - } -} - -/** - * @brief Set the Memory address. - * @rmtoll M0AR M0A LL_DMA_SetMemoryAddress - * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. - * @note This API must not be called when the DMA channel is enabled. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param MemoryAddress Between 0 to 0xFFFFFFFF - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetMemoryAddress(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t MemoryAddress) -{ - WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR, MemoryAddress); -} - -/** - * @brief Set the Peripheral address. - * @rmtoll PAR PA LL_DMA_SetPeriphAddress - * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. - * @note This API must not be called when the DMA channel is enabled. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param PeriphAddress Between 0 to 0xFFFFFFFF - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetPeriphAddress(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t PeriphAddress) -{ - WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR, PeriphAddress); -} - -/** - * @brief Get the Memory address. - * @rmtoll M0AR M0A LL_DMA_GetMemoryAddress - * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Between 0 to 0xFFFFFFFF - */ -__STATIC_INLINE uint32_t LL_DMA_GetMemoryAddress(DMA_TypeDef* DMAx, uint32_t Stream) -{ - return (READ_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR)); -} - -/** - * @brief Get the Peripheral address. - * @rmtoll PAR PA LL_DMA_GetPeriphAddress - * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Between 0 to 0xFFFFFFFF - */ -__STATIC_INLINE uint32_t LL_DMA_GetPeriphAddress(DMA_TypeDef* DMAx, uint32_t Stream) -{ - return (READ_REG(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR)); -} - -/** - * @brief Set the Memory to Memory Source address. - * @rmtoll PAR PA LL_DMA_SetM2MSrcAddress - * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. - * @note This API must not be called when the DMA channel is enabled. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param MemoryAddress Between 0 to 0xFFFFFFFF - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetM2MSrcAddress(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t MemoryAddress) -{ - WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR, MemoryAddress); -} - -/** - * @brief Set the Memory to Memory Destination address. - * @rmtoll M0AR M0A LL_DMA_SetM2MDstAddress - * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. - * @note This API must not be called when the DMA channel is enabled. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param MemoryAddress Between 0 to 0xFFFFFFFF - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetM2MDstAddress(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t MemoryAddress) - { - WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR, MemoryAddress); - } - -/** - * @brief Get the Memory to Memory Source address. - * @rmtoll PAR PA LL_DMA_GetM2MSrcAddress - * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Between 0 to 0xFFFFFFFF - */ -__STATIC_INLINE uint32_t LL_DMA_GetM2MSrcAddress(DMA_TypeDef* DMAx, uint32_t Stream) - { - return (READ_REG(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR)); - } - -/** - * @brief Get the Memory to Memory Destination address. - * @rmtoll M0AR M0A LL_DMA_GetM2MDstAddress - * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Between 0 to 0xFFFFFFFF - */ -__STATIC_INLINE uint32_t LL_DMA_GetM2MDstAddress(DMA_TypeDef* DMAx, uint32_t Stream) -{ - return (READ_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR)); -} - -/** - * @brief Set Memory 1 address (used in case of Double buffer mode). - * @rmtoll M1AR M1A LL_DMA_SetMemory1Address - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @param Address Between 0 to 0xFFFFFFFF - * @retval None - */ -__STATIC_INLINE void LL_DMA_SetMemory1Address(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Address) -{ - MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M1AR, DMA_SxM1AR_M1A, Address); -} - -/** - * @brief Get Memory 1 address (used in case of Double buffer mode). - * @rmtoll M1AR M1A LL_DMA_GetMemory1Address - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval Between 0 to 0xFFFFFFFF - */ -__STATIC_INLINE uint32_t LL_DMA_GetMemory1Address(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M1AR); -} - -/** - * @} - */ - -/** @defgroup DMA_LL_EF_FLAG_Management FLAG_Management - * @{ - */ - -/** - * @brief Get Stream 0 half transfer flag. - * @rmtoll LISR HTIF0 LL_DMA_IsActiveFlag_HT0 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT0(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_HTIF0)==(DMA_LISR_HTIF0)); -} - -/** - * @brief Get Stream 1 half transfer flag. - * @rmtoll LISR HTIF1 LL_DMA_IsActiveFlag_HT1 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT1(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_HTIF1)==(DMA_LISR_HTIF1)); -} - -/** - * @brief Get Stream 2 half transfer flag. - * @rmtoll LISR HTIF2 LL_DMA_IsActiveFlag_HT2 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT2(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_HTIF2)==(DMA_LISR_HTIF2)); -} - -/** - * @brief Get Stream 3 half transfer flag. - * @rmtoll LISR HTIF3 LL_DMA_IsActiveFlag_HT3 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT3(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_HTIF3)==(DMA_LISR_HTIF3)); -} - -/** - * @brief Get Stream 4 half transfer flag. - * @rmtoll HISR HTIF4 LL_DMA_IsActiveFlag_HT4 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT4(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_HTIF4)==(DMA_HISR_HTIF4)); -} - -/** - * @brief Get Stream 5 half transfer flag. - * @rmtoll HISR HTIF0 LL_DMA_IsActiveFlag_HT5 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT5(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_HTIF5)==(DMA_HISR_HTIF5)); -} - -/** - * @brief Get Stream 6 half transfer flag. - * @rmtoll HISR HTIF6 LL_DMA_IsActiveFlag_HT6 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT6(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_HTIF6)==(DMA_HISR_HTIF6)); -} - -/** - * @brief Get Stream 7 half transfer flag. - * @rmtoll HISR HTIF7 LL_DMA_IsActiveFlag_HT7 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT7(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_HTIF7)==(DMA_HISR_HTIF7)); -} - -/** - * @brief Get Stream 0 transfer complete flag. - * @rmtoll LISR TCIF0 LL_DMA_IsActiveFlag_TC0 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC0(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_TCIF0)==(DMA_LISR_TCIF0)); -} - -/** - * @brief Get Stream 1 transfer complete flag. - * @rmtoll LISR TCIF1 LL_DMA_IsActiveFlag_TC1 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC1(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_TCIF1)==(DMA_LISR_TCIF1)); -} - -/** - * @brief Get Stream 2 transfer complete flag. - * @rmtoll LISR TCIF2 LL_DMA_IsActiveFlag_TC2 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC2(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_TCIF2)==(DMA_LISR_TCIF2)); -} - -/** - * @brief Get Stream 3 transfer complete flag. - * @rmtoll LISR TCIF3 LL_DMA_IsActiveFlag_TC3 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC3(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_TCIF3)==(DMA_LISR_TCIF3)); -} - -/** - * @brief Get Stream 4 transfer complete flag. - * @rmtoll HISR TCIF4 LL_DMA_IsActiveFlag_TC4 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC4(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_TCIF4)==(DMA_HISR_TCIF4)); -} - -/** - * @brief Get Stream 5 transfer complete flag. - * @rmtoll HISR TCIF0 LL_DMA_IsActiveFlag_TC5 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC5(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_TCIF5)==(DMA_HISR_TCIF5)); -} - -/** - * @brief Get Stream 6 transfer complete flag. - * @rmtoll HISR TCIF6 LL_DMA_IsActiveFlag_TC6 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC6(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_TCIF6)==(DMA_HISR_TCIF6)); -} - -/** - * @brief Get Stream 7 transfer complete flag. - * @rmtoll HISR TCIF7 LL_DMA_IsActiveFlag_TC7 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC7(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_TCIF7)==(DMA_HISR_TCIF7)); -} - -/** - * @brief Get Stream 0 transfer error flag. - * @rmtoll LISR TEIF0 LL_DMA_IsActiveFlag_TE0 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE0(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_TEIF0)==(DMA_LISR_TEIF0)); -} - -/** - * @brief Get Stream 1 transfer error flag. - * @rmtoll LISR TEIF1 LL_DMA_IsActiveFlag_TE1 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE1(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_TEIF1)==(DMA_LISR_TEIF1)); -} - -/** - * @brief Get Stream 2 transfer error flag. - * @rmtoll LISR TEIF2 LL_DMA_IsActiveFlag_TE2 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE2(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_TEIF2)==(DMA_LISR_TEIF2)); -} - -/** - * @brief Get Stream 3 transfer error flag. - * @rmtoll LISR TEIF3 LL_DMA_IsActiveFlag_TE3 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE3(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_TEIF3)==(DMA_LISR_TEIF3)); -} - -/** - * @brief Get Stream 4 transfer error flag. - * @rmtoll HISR TEIF4 LL_DMA_IsActiveFlag_TE4 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE4(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_TEIF4)==(DMA_HISR_TEIF4)); -} - -/** - * @brief Get Stream 5 transfer error flag. - * @rmtoll HISR TEIF0 LL_DMA_IsActiveFlag_TE5 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE5(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_TEIF5)==(DMA_HISR_TEIF5)); -} - -/** - * @brief Get Stream 6 transfer error flag. - * @rmtoll HISR TEIF6 LL_DMA_IsActiveFlag_TE6 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE6(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_TEIF6)==(DMA_HISR_TEIF6)); -} - -/** - * @brief Get Stream 7 transfer error flag. - * @rmtoll HISR TEIF7 LL_DMA_IsActiveFlag_TE7 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE7(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_TEIF7)==(DMA_HISR_TEIF7)); -} - -/** - * @brief Get Stream 0 direct mode error flag. - * @rmtoll LISR DMEIF0 LL_DMA_IsActiveFlag_DME0 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME0(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_DMEIF0)==(DMA_LISR_DMEIF0)); -} - -/** - * @brief Get Stream 1 direct mode error flag. - * @rmtoll LISR DMEIF1 LL_DMA_IsActiveFlag_DME1 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME1(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_DMEIF1)==(DMA_LISR_DMEIF1)); -} - -/** - * @brief Get Stream 2 direct mode error flag. - * @rmtoll LISR DMEIF2 LL_DMA_IsActiveFlag_DME2 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME2(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_DMEIF2)==(DMA_LISR_DMEIF2)); -} - -/** - * @brief Get Stream 3 direct mode error flag. - * @rmtoll LISR DMEIF3 LL_DMA_IsActiveFlag_DME3 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME3(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_DMEIF3)==(DMA_LISR_DMEIF3)); -} - -/** - * @brief Get Stream 4 direct mode error flag. - * @rmtoll HISR DMEIF4 LL_DMA_IsActiveFlag_DME4 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME4(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_DMEIF4)==(DMA_HISR_DMEIF4)); -} - -/** - * @brief Get Stream 5 direct mode error flag. - * @rmtoll HISR DMEIF0 LL_DMA_IsActiveFlag_DME5 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME5(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_DMEIF5)==(DMA_HISR_DMEIF5)); -} - -/** - * @brief Get Stream 6 direct mode error flag. - * @rmtoll HISR DMEIF6 LL_DMA_IsActiveFlag_DME6 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME6(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_DMEIF6)==(DMA_HISR_DMEIF6)); -} - -/** - * @brief Get Stream 7 direct mode error flag. - * @rmtoll HISR DMEIF7 LL_DMA_IsActiveFlag_DME7 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME7(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_DMEIF7)==(DMA_HISR_DMEIF7)); -} - -/** - * @brief Get Stream 0 FIFO error flag. - * @rmtoll LISR FEIF0 LL_DMA_IsActiveFlag_FE0 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE0(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_FEIF0)==(DMA_LISR_FEIF0)); -} - -/** - * @brief Get Stream 1 FIFO error flag. - * @rmtoll LISR FEIF1 LL_DMA_IsActiveFlag_FE1 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE1(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_FEIF1)==(DMA_LISR_FEIF1)); -} - -/** - * @brief Get Stream 2 FIFO error flag. - * @rmtoll LISR FEIF2 LL_DMA_IsActiveFlag_FE2 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE2(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_FEIF2)==(DMA_LISR_FEIF2)); -} - -/** - * @brief Get Stream 3 FIFO error flag. - * @rmtoll LISR FEIF3 LL_DMA_IsActiveFlag_FE3 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE3(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->LISR ,DMA_LISR_FEIF3)==(DMA_LISR_FEIF3)); -} - -/** - * @brief Get Stream 4 FIFO error flag. - * @rmtoll HISR FEIF4 LL_DMA_IsActiveFlag_FE4 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE4(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_FEIF4)==(DMA_HISR_FEIF4)); -} - -/** - * @brief Get Stream 5 FIFO error flag. - * @rmtoll HISR FEIF0 LL_DMA_IsActiveFlag_FE5 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE5(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_FEIF5)==(DMA_HISR_FEIF5)); -} - -/** - * @brief Get Stream 6 FIFO error flag. - * @rmtoll HISR FEIF6 LL_DMA_IsActiveFlag_FE6 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE6(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_FEIF6)==(DMA_HISR_FEIF6)); -} - -/** - * @brief Get Stream 7 FIFO error flag. - * @rmtoll HISR FEIF7 LL_DMA_IsActiveFlag_FE7 - * @param DMAx DMAx Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE7(DMA_TypeDef *DMAx) -{ - return (READ_BIT(DMAx->HISR ,DMA_HISR_FEIF7)==(DMA_HISR_FEIF7)); -} - -/** - * @brief Clear Stream 0 half transfer flag. - * @rmtoll LIFCR CHTIF0 LL_DMA_ClearFlag_HT0 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_HT0(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CHTIF0); -} - -/** - * @brief Clear Stream 1 half transfer flag. - * @rmtoll LIFCR CHTIF1 LL_DMA_ClearFlag_HT1 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_HT1(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CHTIF1); -} - -/** - * @brief Clear Stream 2 half transfer flag. - * @rmtoll LIFCR CHTIF2 LL_DMA_ClearFlag_HT2 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_HT2(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CHTIF2); -} - -/** - * @brief Clear Stream 3 half transfer flag. - * @rmtoll LIFCR CHTIF3 LL_DMA_ClearFlag_HT3 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_HT3(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CHTIF3); -} - -/** - * @brief Clear Stream 4 half transfer flag. - * @rmtoll HIFCR CHTIF4 LL_DMA_ClearFlag_HT4 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_HT4(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CHTIF4); -} - -/** - * @brief Clear Stream 5 half transfer flag. - * @rmtoll HIFCR CHTIF5 LL_DMA_ClearFlag_HT5 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_HT5(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CHTIF5); -} - -/** - * @brief Clear Stream 6 half transfer flag. - * @rmtoll HIFCR CHTIF6 LL_DMA_ClearFlag_HT6 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_HT6(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CHTIF6); -} - -/** - * @brief Clear Stream 7 half transfer flag. - * @rmtoll HIFCR CHTIF7 LL_DMA_ClearFlag_HT7 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_HT7(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CHTIF7); -} - -/** - * @brief Clear Stream 0 transfer complete flag. - * @rmtoll LIFCR CTCIF0 LL_DMA_ClearFlag_TC0 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TC0(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTCIF0); -} - -/** - * @brief Clear Stream 1 transfer complete flag. - * @rmtoll LIFCR CTCIF1 LL_DMA_ClearFlag_TC1 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TC1(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTCIF1); -} - -/** - * @brief Clear Stream 2 transfer complete flag. - * @rmtoll LIFCR CTCIF2 LL_DMA_ClearFlag_TC2 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TC2(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTCIF2); -} - -/** - * @brief Clear Stream 3 transfer complete flag. - * @rmtoll LIFCR CTCIF3 LL_DMA_ClearFlag_TC3 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TC3(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTCIF3); -} - -/** - * @brief Clear Stream 4 transfer complete flag. - * @rmtoll HIFCR CTCIF4 LL_DMA_ClearFlag_TC4 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TC4(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTCIF4); -} - -/** - * @brief Clear Stream 5 transfer complete flag. - * @rmtoll HIFCR CTCIF5 LL_DMA_ClearFlag_TC5 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TC5(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTCIF5); -} - -/** - * @brief Clear Stream 6 transfer complete flag. - * @rmtoll HIFCR CTCIF6 LL_DMA_ClearFlag_TC6 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TC6(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTCIF6); -} - -/** - * @brief Clear Stream 7 transfer complete flag. - * @rmtoll HIFCR CTCIF7 LL_DMA_ClearFlag_TC7 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TC7(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTCIF7); -} - -/** - * @brief Clear Stream 0 transfer error flag. - * @rmtoll LIFCR CTEIF0 LL_DMA_ClearFlag_TE0 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TE0(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTEIF0); -} - -/** - * @brief Clear Stream 1 transfer error flag. - * @rmtoll LIFCR CTEIF1 LL_DMA_ClearFlag_TE1 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TE1(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTEIF1); -} - -/** - * @brief Clear Stream 2 transfer error flag. - * @rmtoll LIFCR CTEIF2 LL_DMA_ClearFlag_TE2 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TE2(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTEIF2); -} - -/** - * @brief Clear Stream 3 transfer error flag. - * @rmtoll LIFCR CTEIF3 LL_DMA_ClearFlag_TE3 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TE3(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTEIF3); -} - -/** - * @brief Clear Stream 4 transfer error flag. - * @rmtoll HIFCR CTEIF4 LL_DMA_ClearFlag_TE4 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TE4(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTEIF4); -} - -/** - * @brief Clear Stream 5 transfer error flag. - * @rmtoll HIFCR CTEIF5 LL_DMA_ClearFlag_TE5 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TE5(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTEIF5); -} - -/** - * @brief Clear Stream 6 transfer error flag. - * @rmtoll HIFCR CTEIF6 LL_DMA_ClearFlag_TE6 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TE6(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTEIF6); -} - -/** - * @brief Clear Stream 7 transfer error flag. - * @rmtoll HIFCR CTEIF7 LL_DMA_ClearFlag_TE7 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_TE7(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTEIF7); -} - -/** - * @brief Clear Stream 0 direct mode error flag. - * @rmtoll LIFCR CDMEIF0 LL_DMA_ClearFlag_DME0 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_DME0(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CDMEIF0); -} - -/** - * @brief Clear Stream 1 direct mode error flag. - * @rmtoll LIFCR CDMEIF1 LL_DMA_ClearFlag_DME1 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_DME1(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CDMEIF1); -} - -/** - * @brief Clear Stream 2 direct mode error flag. - * @rmtoll LIFCR CDMEIF2 LL_DMA_ClearFlag_DME2 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_DME2(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CDMEIF2); -} - -/** - * @brief Clear Stream 3 direct mode error flag. - * @rmtoll LIFCR CDMEIF3 LL_DMA_ClearFlag_DME3 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_DME3(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CDMEIF3); -} - -/** - * @brief Clear Stream 4 direct mode error flag. - * @rmtoll HIFCR CDMEIF4 LL_DMA_ClearFlag_DME4 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_DME4(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CDMEIF4); -} - -/** - * @brief Clear Stream 5 direct mode error flag. - * @rmtoll HIFCR CDMEIF5 LL_DMA_ClearFlag_DME5 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_DME5(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CDMEIF5); -} - -/** - * @brief Clear Stream 6 direct mode error flag. - * @rmtoll HIFCR CDMEIF6 LL_DMA_ClearFlag_DME6 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_DME6(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CDMEIF6); -} - -/** - * @brief Clear Stream 7 direct mode error flag. - * @rmtoll HIFCR CDMEIF7 LL_DMA_ClearFlag_DME7 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_DME7(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CDMEIF7); -} - -/** - * @brief Clear Stream 0 FIFO error flag. - * @rmtoll LIFCR CFEIF0 LL_DMA_ClearFlag_FE0 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_FE0(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CFEIF0); -} - -/** - * @brief Clear Stream 1 FIFO error flag. - * @rmtoll LIFCR CFEIF1 LL_DMA_ClearFlag_FE1 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_FE1(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CFEIF1); -} - -/** - * @brief Clear Stream 2 FIFO error flag. - * @rmtoll LIFCR CFEIF2 LL_DMA_ClearFlag_FE2 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_FE2(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CFEIF2); -} - -/** - * @brief Clear Stream 3 FIFO error flag. - * @rmtoll LIFCR CFEIF3 LL_DMA_ClearFlag_FE3 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_FE3(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CFEIF3); -} - -/** - * @brief Clear Stream 4 FIFO error flag. - * @rmtoll HIFCR CFEIF4 LL_DMA_ClearFlag_FE4 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_FE4(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CFEIF4); -} - -/** - * @brief Clear Stream 5 FIFO error flag. - * @rmtoll HIFCR CFEIF5 LL_DMA_ClearFlag_FE5 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_FE5(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CFEIF5); -} - -/** - * @brief Clear Stream 6 FIFO error flag. - * @rmtoll HIFCR CFEIF6 LL_DMA_ClearFlag_FE6 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_FE6(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CFEIF6); -} - -/** - * @brief Clear Stream 7 FIFO error flag. - * @rmtoll HIFCR CFEIF7 LL_DMA_ClearFlag_FE7 - * @param DMAx DMAx Instance - * @retval None - */ -__STATIC_INLINE void LL_DMA_ClearFlag_FE7(DMA_TypeDef *DMAx) -{ - WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CFEIF7); -} - -/** - * @} - */ - -/** @defgroup DMA_LL_EF_IT_Management IT_Management - * @{ - */ - -/** - * @brief Enable Half transfer interrupt. - * @rmtoll CR HTIE LL_DMA_EnableIT_HT - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_EnableIT_HT(DMA_TypeDef *DMAx, uint32_t Stream) -{ - SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_HTIE); -} - -/** - * @brief Enable Transfer error interrupt. - * @rmtoll CR TEIE LL_DMA_EnableIT_TE - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_EnableIT_TE(DMA_TypeDef *DMAx, uint32_t Stream) -{ - SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TEIE); -} - -/** - * @brief Enable Transfer complete interrupt. - * @rmtoll CR TCIE LL_DMA_EnableIT_TC - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_EnableIT_TC(DMA_TypeDef *DMAx, uint32_t Stream) -{ - SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TCIE); -} - -/** - * @brief Enable Direct mode error interrupt. - * @rmtoll CR DMEIE LL_DMA_EnableIT_DME - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_EnableIT_DME(DMA_TypeDef *DMAx, uint32_t Stream) -{ - SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DMEIE); -} - -/** - * @brief Enable FIFO error interrupt. - * @rmtoll FCR FEIE LL_DMA_EnableIT_FE - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_EnableIT_FE(DMA_TypeDef *DMAx, uint32_t Stream) -{ - SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FEIE); -} - -/** - * @brief Disable Half transfer interrupt. - * @rmtoll CR HTIE LL_DMA_DisableIT_HT - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_DisableIT_HT(DMA_TypeDef *DMAx, uint32_t Stream) -{ - CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_HTIE); -} - -/** - * @brief Disable Transfer error interrupt. - * @rmtoll CR TEIE LL_DMA_DisableIT_TE - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_DisableIT_TE(DMA_TypeDef *DMAx, uint32_t Stream) -{ - CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TEIE); -} - -/** - * @brief Disable Transfer complete interrupt. - * @rmtoll CR TCIE LL_DMA_DisableIT_TC - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_DisableIT_TC(DMA_TypeDef *DMAx, uint32_t Stream) -{ - CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TCIE); -} - -/** - * @brief Disable Direct mode error interrupt. - * @rmtoll CR DMEIE LL_DMA_DisableIT_DME - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_DisableIT_DME(DMA_TypeDef *DMAx, uint32_t Stream) -{ - CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DMEIE); -} - -/** - * @brief Disable FIFO error interrupt. - * @rmtoll FCR FEIE LL_DMA_DisableIT_FE - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval None - */ -__STATIC_INLINE void LL_DMA_DisableIT_FE(DMA_TypeDef *DMAx, uint32_t Stream) -{ - CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FEIE); -} - -/** - * @brief Check if Half transfer interrupt is enabled. - * @rmtoll CR HTIE LL_DMA_IsEnabledIT_HT - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_HT(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_HTIE) == DMA_SxCR_HTIE); -} - -/** - * @brief Check if Transfer error nterrup is enabled. - * @rmtoll CR TEIE LL_DMA_IsEnabledIT_TE - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TE(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TEIE) == DMA_SxCR_TEIE); -} - -/** - * @brief Check if Transfer complete interrupt is enabled. - * @rmtoll CR TCIE LL_DMA_IsEnabledIT_TC - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TCIE) == DMA_SxCR_TCIE); -} - -/** - * @brief Check if Direct mode error interrupt is enabled. - * @rmtoll CR DMEIE LL_DMA_IsEnabledIT_DME - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_DME(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DMEIE) == DMA_SxCR_DMEIE); -} - -/** - * @brief Check if FIFO error interrupt is enabled. - * @rmtoll FCR FEIE LL_DMA_IsEnabledIT_FE - * @param DMAx DMAx Instance - * @param Stream This parameter can be one of the following values: - * @arg @ref LL_DMA_STREAM_0 - * @arg @ref LL_DMA_STREAM_1 - * @arg @ref LL_DMA_STREAM_2 - * @arg @ref LL_DMA_STREAM_3 - * @arg @ref LL_DMA_STREAM_4 - * @arg @ref LL_DMA_STREAM_5 - * @arg @ref LL_DMA_STREAM_6 - * @arg @ref LL_DMA_STREAM_7 - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_FE(DMA_TypeDef *DMAx, uint32_t Stream) -{ - return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FEIE) == DMA_SxFCR_FEIE); -} - -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup DMA_LL_EF_Init Initialization and de-initialization functions - * @{ - */ - -uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Stream, LL_DMA_InitTypeDef *DMA_InitStruct); -uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Stream); -void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct); - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* DMA1 || DMA2 */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_DMA_H */ - +/** + ****************************************************************************** + * @file stm32f4xx_ll_dma.h + * @author MCD Application Team + * @brief Header file of DMA LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_LL_DMA_H +#define __STM32F4xx_LL_DMA_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_LL_Driver + * @{ + */ + +#if defined (DMA1) || defined (DMA2) + +/** @defgroup DMA_LL DMA + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup DMA_LL_Private_Variables DMA Private Variables + * @{ + */ +/* Array used to get the DMA stream register offset versus stream index LL_DMA_STREAM_x */ +static const uint8_t STREAM_OFFSET_TAB[] = +{ + (uint8_t)(DMA1_Stream0_BASE - DMA1_BASE), + (uint8_t)(DMA1_Stream1_BASE - DMA1_BASE), + (uint8_t)(DMA1_Stream2_BASE - DMA1_BASE), + (uint8_t)(DMA1_Stream3_BASE - DMA1_BASE), + (uint8_t)(DMA1_Stream4_BASE - DMA1_BASE), + (uint8_t)(DMA1_Stream5_BASE - DMA1_BASE), + (uint8_t)(DMA1_Stream6_BASE - DMA1_BASE), + (uint8_t)(DMA1_Stream7_BASE - DMA1_BASE) +}; + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup DMA_LL_Private_Constants DMA Private Constants + * @{ + */ +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_ES_INIT DMA Exported Init structure + * @{ + */ +typedef struct +{ + uint32_t PeriphOrM2MSrcAddress; /*!< Specifies the peripheral base address for DMA transfer + or as Source base address in case of memory to memory transfer direction. + + This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ + + uint32_t MemoryOrM2MDstAddress; /*!< Specifies the memory base address for DMA transfer + or as Destination base address in case of memory to memory transfer direction. + + This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ + + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_LL_EC_DIRECTION + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataTransferDirection(). */ + + uint32_t Mode; /*!< Specifies the normal or circular operation mode. + This parameter can be a value of @ref DMA_LL_EC_MODE + @note The circular buffer mode cannot be used if the memory to memory + data transfer direction is configured on the selected Stream + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMode(). */ + + uint32_t PeriphOrM2MSrcIncMode; /*!< Specifies whether the Peripheral address or Source address in case of memory to memory transfer direction + is incremented or not. + This parameter can be a value of @ref DMA_LL_EC_PERIPH + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphIncMode(). */ + + uint32_t MemoryOrM2MDstIncMode; /*!< Specifies whether the Memory address or Destination address in case of memory to memory transfer direction + is incremented or not. + This parameter can be a value of @ref DMA_LL_EC_MEMORY + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryIncMode(). */ + + uint32_t PeriphOrM2MSrcDataSize; /*!< Specifies the Peripheral data size alignment or Source data size alignment (byte, half word, word) + in case of memory to memory transfer direction. + This parameter can be a value of @ref DMA_LL_EC_PDATAALIGN + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphSize(). */ + + uint32_t MemoryOrM2MDstDataSize; /*!< Specifies the Memory data size alignment or Destination data size alignment (byte, half word, word) + in case of memory to memory transfer direction. + This parameter can be a value of @ref DMA_LL_EC_MDATAALIGN + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemorySize(). */ + + uint32_t NbData; /*!< Specifies the number of data to transfer, in data unit. + The data unit is equal to the source buffer configuration set in PeripheralSize + or MemorySize parameters depending in the transfer direction. + This parameter must be a value between Min_Data = 0 and Max_Data = 0x0000FFFF + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataLength(). */ + + uint32_t Channel; /*!< Specifies the peripheral channel. + This parameter can be a value of @ref DMA_LL_EC_CHANNEL + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetChannelSelection(). */ + + uint32_t Priority; /*!< Specifies the channel priority level. + This parameter can be a value of @ref DMA_LL_EC_PRIORITY + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetStreamPriorityLevel(). */ + + uint32_t FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream. + This parameter can be a value of @ref DMA_LL_FIFOMODE + @note The Direct mode (FIFO mode disabled) cannot be used if the + memory-to-memory data transfer is configured on the selected stream + + This feature can be modified afterwards using unitary functions @ref LL_DMA_EnableFifoMode() or @ref LL_DMA_EnableFifoMode() . */ + + uint32_t FIFOThreshold; /*!< Specifies the FIFO threshold level. + This parameter can be a value of @ref DMA_LL_EC_FIFOTHRESHOLD + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetFIFOThreshold(). */ + + uint32_t MemBurst; /*!< Specifies the Burst transfer configuration for the memory transfers. + It specifies the amount of data to be transferred in a single non interruptible + transaction. + This parameter can be a value of @ref DMA_LL_EC_MBURST + @note The burst mode is possible only if the address Increment mode is enabled. + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryBurstxfer(). */ + + uint32_t PeriphBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers. + It specifies the amount of data to be transferred in a single non interruptible + transaction. + This parameter can be a value of @ref DMA_LL_EC_PBURST + @note The burst mode is possible only if the address Increment mode is enabled. + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphBurstxfer(). */ + +} LL_DMA_InitTypeDef; +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Constants DMA Exported Constants + * @{ + */ + +/** @defgroup DMA_LL_EC_STREAM STREAM + * @{ + */ +#define LL_DMA_STREAM_0 0x00000000U +#define LL_DMA_STREAM_1 0x00000001U +#define LL_DMA_STREAM_2 0x00000002U +#define LL_DMA_STREAM_3 0x00000003U +#define LL_DMA_STREAM_4 0x00000004U +#define LL_DMA_STREAM_5 0x00000005U +#define LL_DMA_STREAM_6 0x00000006U +#define LL_DMA_STREAM_7 0x00000007U +#define LL_DMA_STREAM_ALL 0xFFFF0000U +/** + * @} + */ + +/** @defgroup DMA_LL_EC_DIRECTION DIRECTION + * @{ + */ +#define LL_DMA_DIRECTION_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ +#define LL_DMA_DIRECTION_MEMORY_TO_PERIPH DMA_SxCR_DIR_0 /*!< Memory to peripheral direction */ +#define LL_DMA_DIRECTION_MEMORY_TO_MEMORY DMA_SxCR_DIR_1 /*!< Memory to memory direction */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MODE MODE + * @{ + */ +#define LL_DMA_MODE_NORMAL 0x00000000U /*!< Normal Mode */ +#define LL_DMA_MODE_CIRCULAR DMA_SxCR_CIRC /*!< Circular Mode */ +#define LL_DMA_MODE_PFCTRL DMA_SxCR_PFCTRL /*!< Peripheral flow control mode */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_DOUBLEBUFFER_MODE DOUBLEBUFFER MODE + * @{ + */ +#define LL_DMA_DOUBLEBUFFER_MODE_DISABLE 0x00000000U /*!< Disable double buffering mode */ +#define LL_DMA_DOUBLEBUFFER_MODE_ENABLE DMA_SxCR_DBM /*!< Enable double buffering mode */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PERIPH PERIPH + * @{ + */ +#define LL_DMA_PERIPH_NOINCREMENT 0x00000000U /*!< Peripheral increment mode Disable */ +#define LL_DMA_PERIPH_INCREMENT DMA_SxCR_PINC /*!< Peripheral increment mode Enable */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MEMORY MEMORY + * @{ + */ +#define LL_DMA_MEMORY_NOINCREMENT 0x00000000U /*!< Memory increment mode Disable */ +#define LL_DMA_MEMORY_INCREMENT DMA_SxCR_MINC /*!< Memory increment mode Enable */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PDATAALIGN PDATAALIGN + * @{ + */ +#define LL_DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment : Byte */ +#define LL_DMA_PDATAALIGN_HALFWORD DMA_SxCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */ +#define LL_DMA_PDATAALIGN_WORD DMA_SxCR_PSIZE_1 /*!< Peripheral data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MDATAALIGN MDATAALIGN + * @{ + */ +#define LL_DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment : Byte */ +#define LL_DMA_MDATAALIGN_HALFWORD DMA_SxCR_MSIZE_0 /*!< Memory data alignment : HalfWord */ +#define LL_DMA_MDATAALIGN_WORD DMA_SxCR_MSIZE_1 /*!< Memory data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_OFFSETSIZE OFFSETSIZE + * @{ + */ +#define LL_DMA_OFFSETSIZE_PSIZE 0x00000000U /*!< Peripheral increment offset size is linked to the PSIZE */ +#define LL_DMA_OFFSETSIZE_FIXEDTO4 DMA_SxCR_PINCOS /*!< Peripheral increment offset size is fixed to 4 (32-bit alignment) */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PRIORITY PRIORITY + * @{ + */ +#define LL_DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */ +#define LL_DMA_PRIORITY_MEDIUM DMA_SxCR_PL_0 /*!< Priority level : Medium */ +#define LL_DMA_PRIORITY_HIGH DMA_SxCR_PL_1 /*!< Priority level : High */ +#define LL_DMA_PRIORITY_VERYHIGH DMA_SxCR_PL /*!< Priority level : Very_High */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_CHANNEL CHANNEL + * @{ + */ +#define LL_DMA_CHANNEL_0 0x00000000U /* Select Channel0 of DMA Instance */ +#define LL_DMA_CHANNEL_1 DMA_SxCR_CHSEL_0 /* Select Channel1 of DMA Instance */ +#define LL_DMA_CHANNEL_2 DMA_SxCR_CHSEL_1 /* Select Channel2 of DMA Instance */ +#define LL_DMA_CHANNEL_3 (DMA_SxCR_CHSEL_0 | DMA_SxCR_CHSEL_1) /* Select Channel3 of DMA Instance */ +#define LL_DMA_CHANNEL_4 DMA_SxCR_CHSEL_2 /* Select Channel4 of DMA Instance */ +#define LL_DMA_CHANNEL_5 (DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_0) /* Select Channel5 of DMA Instance */ +#define LL_DMA_CHANNEL_6 (DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1) /* Select Channel6 of DMA Instance */ +#define LL_DMA_CHANNEL_7 (DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1 | DMA_SxCR_CHSEL_0) /* Select Channel7 of DMA Instance */ +#if defined (DMA_SxCR_CHSEL_3) +#define LL_DMA_CHANNEL_8 DMA_SxCR_CHSEL_3 /* Select Channel8 of DMA Instance */ +#define LL_DMA_CHANNEL_9 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_0) /* Select Channel9 of DMA Instance */ +#define LL_DMA_CHANNEL_10 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_1) /* Select Channel10 of DMA Instance */ +#define LL_DMA_CHANNEL_11 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_1 | DMA_SxCR_CHSEL_0) /* Select Channel11 of DMA Instance */ +#define LL_DMA_CHANNEL_12 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_2) /* Select Channel12 of DMA Instance */ +#define LL_DMA_CHANNEL_13 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_0) /* Select Channel13 of DMA Instance */ +#define LL_DMA_CHANNEL_14 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1) /* Select Channel14 of DMA Instance */ +#define LL_DMA_CHANNEL_15 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1 | DMA_SxCR_CHSEL_0) /* Select Channel15 of DMA Instance */ +#endif /* DMA_SxCR_CHSEL_3 */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MBURST MBURST + * @{ + */ +#define LL_DMA_MBURST_SINGLE 0x00000000U /*!< Memory burst single transfer configuration */ +#define LL_DMA_MBURST_INC4 DMA_SxCR_MBURST_0 /*!< Memory burst of 4 beats transfer configuration */ +#define LL_DMA_MBURST_INC8 DMA_SxCR_MBURST_1 /*!< Memory burst of 8 beats transfer configuration */ +#define LL_DMA_MBURST_INC16 (DMA_SxCR_MBURST_0 | DMA_SxCR_MBURST_1) /*!< Memory burst of 16 beats transfer configuration */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PBURST PBURST + * @{ + */ +#define LL_DMA_PBURST_SINGLE 0x00000000U /*!< Peripheral burst single transfer configuration */ +#define LL_DMA_PBURST_INC4 DMA_SxCR_PBURST_0 /*!< Peripheral burst of 4 beats transfer configuration */ +#define LL_DMA_PBURST_INC8 DMA_SxCR_PBURST_1 /*!< Peripheral burst of 8 beats transfer configuration */ +#define LL_DMA_PBURST_INC16 (DMA_SxCR_PBURST_0 | DMA_SxCR_PBURST_1) /*!< Peripheral burst of 16 beats transfer configuration */ +/** + * @} + */ + +/** @defgroup DMA_LL_FIFOMODE DMA_LL_FIFOMODE + * @{ + */ +#define LL_DMA_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable (direct mode is enabled) */ +#define LL_DMA_FIFOMODE_ENABLE DMA_SxFCR_DMDIS /*!< FIFO mode enable */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_FIFOSTATUS_0 FIFOSTATUS 0 + * @{ + */ +#define LL_DMA_FIFOSTATUS_0_25 0x00000000U /*!< 0 < fifo_level < 1/4 */ +#define LL_DMA_FIFOSTATUS_25_50 DMA_SxFCR_FS_0 /*!< 1/4 < fifo_level < 1/2 */ +#define LL_DMA_FIFOSTATUS_50_75 DMA_SxFCR_FS_1 /*!< 1/2 < fifo_level < 3/4 */ +#define LL_DMA_FIFOSTATUS_75_100 (DMA_SxFCR_FS_1 | DMA_SxFCR_FS_0) /*!< 3/4 < fifo_level < full */ +#define LL_DMA_FIFOSTATUS_EMPTY DMA_SxFCR_FS_2 /*!< FIFO is empty */ +#define LL_DMA_FIFOSTATUS_FULL (DMA_SxFCR_FS_2 | DMA_SxFCR_FS_0) /*!< FIFO is full */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_FIFOTHRESHOLD FIFOTHRESHOLD + * @{ + */ +#define LL_DMA_FIFOTHRESHOLD_1_4 0x00000000U /*!< FIFO threshold 1 quart full configuration */ +#define LL_DMA_FIFOTHRESHOLD_1_2 DMA_SxFCR_FTH_0 /*!< FIFO threshold half full configuration */ +#define LL_DMA_FIFOTHRESHOLD_3_4 DMA_SxFCR_FTH_1 /*!< FIFO threshold 3 quarts full configuration */ +#define LL_DMA_FIFOTHRESHOLD_FULL DMA_SxFCR_FTH /*!< FIFO threshold full configuration */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_CURRENTTARGETMEM CURRENTTARGETMEM + * @{ + */ +#define LL_DMA_CURRENTTARGETMEM0 0x00000000U /*!< Set CurrentTarget Memory to Memory 0 */ +#define LL_DMA_CURRENTTARGETMEM1 DMA_SxCR_CT /*!< Set CurrentTarget Memory to Memory 1 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @defgroup DMA_LL_EM_WRITE_READ Common Write and read registers macros + * @{ + */ +/** + * @brief Write a value in DMA register + * @param __INSTANCE__ DMA Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_DMA_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in DMA register + * @param __INSTANCE__ DMA Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_DMA_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup DMA_LL_EM_CONVERT_DMAxCHANNELy Convert DMAxStreamy + * @{ + */ +/** + * @brief Convert DMAx_Streamy into DMAx + * @param __STREAM_INSTANCE__ DMAx_Streamy + * @retval DMAx + */ +#define __LL_DMA_GET_INSTANCE(__STREAM_INSTANCE__) \ +(((uint32_t)(__STREAM_INSTANCE__) > ((uint32_t)DMA1_Stream7)) ? DMA2 : DMA1) + +/** + * @brief Convert DMAx_Streamy into LL_DMA_STREAM_y + * @param __STREAM_INSTANCE__ DMAx_Streamy + * @retval LL_DMA_CHANNEL_y + */ +#define __LL_DMA_GET_STREAM(__STREAM_INSTANCE__) \ +(((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream0)) ? LL_DMA_STREAM_0 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream0)) ? LL_DMA_STREAM_0 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream1)) ? LL_DMA_STREAM_1 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream1)) ? LL_DMA_STREAM_1 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream2)) ? LL_DMA_STREAM_2 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream2)) ? LL_DMA_STREAM_2 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream3)) ? LL_DMA_STREAM_3 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream3)) ? LL_DMA_STREAM_3 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream4)) ? LL_DMA_STREAM_4 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream4)) ? LL_DMA_STREAM_4 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream5)) ? LL_DMA_STREAM_5 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream5)) ? LL_DMA_STREAM_5 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream6)) ? LL_DMA_STREAM_6 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream6)) ? LL_DMA_STREAM_6 : \ + LL_DMA_STREAM_7) + +/** + * @brief Convert DMA Instance DMAx and LL_DMA_STREAM_y into DMAx_Streamy + * @param __DMA_INSTANCE__ DMAx + * @param __STREAM__ LL_DMA_STREAM_y + * @retval DMAx_Streamy + */ +#define __LL_DMA_GET_STREAM_INSTANCE(__DMA_INSTANCE__, __STREAM__) \ +((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_0))) ? DMA1_Stream0 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_0))) ? DMA2_Stream0 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_1))) ? DMA1_Stream1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_1))) ? DMA2_Stream1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_2))) ? DMA1_Stream2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_2))) ? DMA2_Stream2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_3))) ? DMA1_Stream3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_3))) ? DMA2_Stream3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_4))) ? DMA1_Stream4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_4))) ? DMA2_Stream4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_5))) ? DMA1_Stream5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_5))) ? DMA2_Stream5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_6))) ? DMA1_Stream6 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_6))) ? DMA2_Stream6 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_7))) ? DMA1_Stream7 : \ + DMA2_Stream7) + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ + /** @defgroup DMA_LL_Exported_Functions DMA Exported Functions + * @{ + */ + +/** @defgroup DMA_LL_EF_Configuration Configuration + * @{ + */ +/** + * @brief Enable DMA stream. + * @rmtoll CR EN LL_DMA_EnableStream + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableStream(DMA_TypeDef *DMAx, uint32_t Stream) +{ + SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_EN); +} + +/** + * @brief Disable DMA stream. + * @rmtoll CR EN LL_DMA_DisableStream + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableStream(DMA_TypeDef *DMAx, uint32_t Stream) +{ + CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_EN); +} + +/** + * @brief Check if DMA stream is enabled or disabled. + * @rmtoll CR EN LL_DMA_IsEnabledStream + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledStream(DMA_TypeDef *DMAx, uint32_t Stream) +{ + return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_EN) == (DMA_SxCR_EN)); +} + +/** + * @brief Configure all parameters linked to DMA transfer. + * @rmtoll CR DIR LL_DMA_ConfigTransfer\n + * CR CIRC LL_DMA_ConfigTransfer\n + * CR PINC LL_DMA_ConfigTransfer\n + * CR MINC LL_DMA_ConfigTransfer\n + * CR PSIZE LL_DMA_ConfigTransfer\n + * CR MSIZE LL_DMA_ConfigTransfer\n + * CR PL LL_DMA_ConfigTransfer\n + * CR PFCTRL LL_DMA_ConfigTransfer + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY or @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH or @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @arg @ref LL_DMA_MODE_NORMAL or @ref LL_DMA_MODE_CIRCULAR or @ref LL_DMA_MODE_PFCTRL + * @arg @ref LL_DMA_PERIPH_INCREMENT or @ref LL_DMA_PERIPH_NOINCREMENT + * @arg @ref LL_DMA_MEMORY_INCREMENT or @ref LL_DMA_MEMORY_NOINCREMENT + * @arg @ref LL_DMA_PDATAALIGN_BYTE or @ref LL_DMA_PDATAALIGN_HALFWORD or @ref LL_DMA_PDATAALIGN_WORD + * @arg @ref LL_DMA_MDATAALIGN_BYTE or @ref LL_DMA_MDATAALIGN_HALFWORD or @ref LL_DMA_MDATAALIGN_WORD + * @arg @ref LL_DMA_PRIORITY_LOW or @ref LL_DMA_PRIORITY_MEDIUM or @ref LL_DMA_PRIORITY_HIGH or @ref LL_DMA_PRIORITY_VERYHIGH + *@retval None + */ +__STATIC_INLINE void LL_DMA_ConfigTransfer(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Configuration) +{ + MODIFY_REG(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, + DMA_SxCR_DIR | DMA_SxCR_CIRC | DMA_SxCR_PINC | DMA_SxCR_MINC | DMA_SxCR_PSIZE | DMA_SxCR_MSIZE | DMA_SxCR_PL | DMA_SxCR_PFCTRL, + Configuration); +} + +/** + * @brief Set Data transfer direction (read from peripheral or from memory). + * @rmtoll CR DIR LL_DMA_SetDataTransferDirection + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Direction) +{ + MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DIR, Direction); +} + +/** + * @brief Get Data transfer direction (read from peripheral or from memory). + * @rmtoll CR DIR LL_DMA_GetDataTransferDirection + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + */ +__STATIC_INLINE uint32_t LL_DMA_GetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Stream) +{ + return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DIR)); +} + +/** + * @brief Set DMA mode normal, circular or peripheral flow control. + * @rmtoll CR CIRC LL_DMA_SetMode\n + * CR PFCTRL LL_DMA_SetMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_DMA_MODE_NORMAL + * @arg @ref LL_DMA_MODE_CIRCULAR + * @arg @ref LL_DMA_MODE_PFCTRL + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMode(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Mode) +{ + MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CIRC | DMA_SxCR_PFCTRL, Mode); +} + +/** + * @brief Get DMA mode normal, circular or peripheral flow control. + * @rmtoll CR CIRC LL_DMA_GetMode\n + * CR PFCTRL LL_DMA_GetMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MODE_NORMAL + * @arg @ref LL_DMA_MODE_CIRCULAR + * @arg @ref LL_DMA_MODE_PFCTRL + */ +__STATIC_INLINE uint32_t LL_DMA_GetMode(DMA_TypeDef *DMAx, uint32_t Stream) +{ + return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CIRC | DMA_SxCR_PFCTRL)); +} + +/** + * @brief Set Peripheral increment mode. + * @rmtoll CR PINC LL_DMA_SetPeriphIncMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param IncrementMode This parameter can be one of the following values: + * @arg @ref LL_DMA_PERIPH_NOINCREMENT + * @arg @ref LL_DMA_PERIPH_INCREMENT + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t IncrementMode) +{ + MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PINC, IncrementMode); +} + +/** + * @brief Get Peripheral increment mode. + * @rmtoll CR PINC LL_DMA_GetPeriphIncMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PERIPH_NOINCREMENT + * @arg @ref LL_DMA_PERIPH_INCREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Stream) +{ + return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PINC)); +} + +/** + * @brief Set Memory increment mode. + * @rmtoll CR MINC LL_DMA_SetMemoryIncMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param IncrementMode This parameter can be one of the following values: + * @arg @ref LL_DMA_MEMORY_NOINCREMENT + * @arg @ref LL_DMA_MEMORY_INCREMENT + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t IncrementMode) +{ + MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MINC, IncrementMode); +} + +/** + * @brief Get Memory increment mode. + * @rmtoll CR MINC LL_DMA_GetMemoryIncMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MEMORY_NOINCREMENT + * @arg @ref LL_DMA_MEMORY_INCREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Stream) +{ + return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MINC)); +} + +/** + * @brief Set Peripheral size. + * @rmtoll CR PSIZE LL_DMA_SetPeriphSize + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Size This parameter can be one of the following values: + * @arg @ref LL_DMA_PDATAALIGN_BYTE + * @arg @ref LL_DMA_PDATAALIGN_HALFWORD + * @arg @ref LL_DMA_PDATAALIGN_WORD + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphSize(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Size) +{ + MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PSIZE, Size); +} + +/** + * @brief Get Peripheral size. + * @rmtoll CR PSIZE LL_DMA_GetPeriphSize + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PDATAALIGN_BYTE + * @arg @ref LL_DMA_PDATAALIGN_HALFWORD + * @arg @ref LL_DMA_PDATAALIGN_WORD + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphSize(DMA_TypeDef *DMAx, uint32_t Stream) +{ + return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PSIZE)); +} + +/** + * @brief Set Memory size. + * @rmtoll CR MSIZE LL_DMA_SetMemorySize + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Size This parameter can be one of the following values: + * @arg @ref LL_DMA_MDATAALIGN_BYTE + * @arg @ref LL_DMA_MDATAALIGN_HALFWORD + * @arg @ref LL_DMA_MDATAALIGN_WORD + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemorySize(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Size) +{ + MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MSIZE, Size); +} + +/** + * @brief Get Memory size. + * @rmtoll CR MSIZE LL_DMA_GetMemorySize + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MDATAALIGN_BYTE + * @arg @ref LL_DMA_MDATAALIGN_HALFWORD + * @arg @ref LL_DMA_MDATAALIGN_WORD + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemorySize(DMA_TypeDef *DMAx, uint32_t Stream) +{ + return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MSIZE)); +} + +/** + * @brief Set Peripheral increment offset size. + * @rmtoll CR PINCOS LL_DMA_SetIncOffsetSize + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param OffsetSize This parameter can be one of the following values: + * @arg @ref LL_DMA_OFFSETSIZE_PSIZE + * @arg @ref LL_DMA_OFFSETSIZE_FIXEDTO4 + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetIncOffsetSize(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t OffsetSize) +{ + MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PINCOS, OffsetSize); +} + +/** + * @brief Get Peripheral increment offset size. + * @rmtoll CR PINCOS LL_DMA_GetIncOffsetSize + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_OFFSETSIZE_PSIZE + * @arg @ref LL_DMA_OFFSETSIZE_FIXEDTO4 + */ +__STATIC_INLINE uint32_t LL_DMA_GetIncOffsetSize(DMA_TypeDef *DMAx, uint32_t Stream) +{ + return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PINCOS)); +} + +/** + * @brief Set Stream priority level. + * @rmtoll CR PL LL_DMA_SetStreamPriorityLevel + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Priority This parameter can be one of the following values: + * @arg @ref LL_DMA_PRIORITY_LOW + * @arg @ref LL_DMA_PRIORITY_MEDIUM + * @arg @ref LL_DMA_PRIORITY_HIGH + * @arg @ref LL_DMA_PRIORITY_VERYHIGH + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetStreamPriorityLevel(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Priority) +{ + MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PL, Priority); +} + +/** + * @brief Get Stream priority level. + * @rmtoll CR PL LL_DMA_GetStreamPriorityLevel + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PRIORITY_LOW + * @arg @ref LL_DMA_PRIORITY_MEDIUM + * @arg @ref LL_DMA_PRIORITY_HIGH + * @arg @ref LL_DMA_PRIORITY_VERYHIGH + */ +__STATIC_INLINE uint32_t LL_DMA_GetStreamPriorityLevel(DMA_TypeDef *DMAx, uint32_t Stream) +{ + return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PL)); +} + +/** + * @brief Set Number of data to transfer. + * @rmtoll NDTR NDT LL_DMA_SetDataLength + * @note This action has no effect if + * stream is enabled. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param NbData Between 0 to 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetDataLength(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t NbData) +{ + MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->NDTR, DMA_SxNDT, NbData); +} + +/** + * @brief Get Number of data to transfer. + * @rmtoll NDTR NDT LL_DMA_GetDataLength + * @note Once the stream is enabled, the return value indicate the + * remaining bytes to be transmitted. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Between 0 to 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetDataLength(DMA_TypeDef* DMAx, uint32_t Stream) +{ + return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->NDTR, DMA_SxNDT)); +} + +/** + * @brief Select Channel number associated to the Stream. + * @rmtoll CR CHSEL LL_DMA_SetChannelSelection + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetChannelSelection(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Channel) +{ + MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CHSEL, Channel); +} + +/** + * @brief Get the Channel number associated to the Stream. + * @rmtoll CR CHSEL LL_DMA_GetChannelSelection + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_0 + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + */ +__STATIC_INLINE uint32_t LL_DMA_GetChannelSelection(DMA_TypeDef *DMAx, uint32_t Stream) +{ + return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CHSEL)); +} + +/** + * @brief Set Memory burst transfer configuration. + * @rmtoll CR MBURST LL_DMA_SetMemoryBurstxfer + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Mburst This parameter can be one of the following values: + * @arg @ref LL_DMA_MBURST_SINGLE + * @arg @ref LL_DMA_MBURST_INC4 + * @arg @ref LL_DMA_MBURST_INC8 + * @arg @ref LL_DMA_MBURST_INC16 + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemoryBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Mburst) +{ + MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MBURST, Mburst); +} + +/** + * @brief Get Memory burst transfer configuration. + * @rmtoll CR MBURST LL_DMA_GetMemoryBurstxfer + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MBURST_SINGLE + * @arg @ref LL_DMA_MBURST_INC4 + * @arg @ref LL_DMA_MBURST_INC8 + * @arg @ref LL_DMA_MBURST_INC16 + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemoryBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream) +{ + return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MBURST)); +} + +/** + * @brief Set Peripheral burst transfer configuration. + * @rmtoll CR PBURST LL_DMA_SetPeriphBurstxfer + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Pburst This parameter can be one of the following values: + * @arg @ref LL_DMA_PBURST_SINGLE + * @arg @ref LL_DMA_PBURST_INC4 + * @arg @ref LL_DMA_PBURST_INC8 + * @arg @ref LL_DMA_PBURST_INC16 + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Pburst) +{ + MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PBURST, Pburst); +} + +/** + * @brief Get Peripheral burst transfer configuration. + * @rmtoll CR PBURST LL_DMA_GetPeriphBurstxfer + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PBURST_SINGLE + * @arg @ref LL_DMA_PBURST_INC4 + * @arg @ref LL_DMA_PBURST_INC8 + * @arg @ref LL_DMA_PBURST_INC16 + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream) +{ + return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PBURST)); +} + +/** + * @brief Set Current target (only in double buffer mode) to Memory 1 or Memory 0. + * @rmtoll CR CT LL_DMA_SetCurrentTargetMem + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param CurrentMemory This parameter can be one of the following values: + * @arg @ref LL_DMA_CURRENTTARGETMEM0 + * @arg @ref LL_DMA_CURRENTTARGETMEM1 + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetCurrentTargetMem(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t CurrentMemory) +{ + MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CT, CurrentMemory); +} + +/** + * @brief Set Current target (only in double buffer mode) to Memory 1 or Memory 0. + * @rmtoll CR CT LL_DMA_GetCurrentTargetMem + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_CURRENTTARGETMEM0 + * @arg @ref LL_DMA_CURRENTTARGETMEM1 + */ +__STATIC_INLINE uint32_t LL_DMA_GetCurrentTargetMem(DMA_TypeDef *DMAx, uint32_t Stream) +{ + return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CT)); +} + +/** + * @brief Enable the double buffer mode. + * @rmtoll CR DBM LL_DMA_EnableDoubleBufferMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableDoubleBufferMode(DMA_TypeDef *DMAx, uint32_t Stream) +{ + SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DBM); +} + +/** + * @brief Disable the double buffer mode. + * @rmtoll CR DBM LL_DMA_DisableDoubleBufferMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableDoubleBufferMode(DMA_TypeDef *DMAx, uint32_t Stream) +{ + CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DBM); +} + +/** + * @brief Get FIFO status. + * @rmtoll FCR FS LL_DMA_GetFIFOStatus + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_FIFOSTATUS_0_25 + * @arg @ref LL_DMA_FIFOSTATUS_25_50 + * @arg @ref LL_DMA_FIFOSTATUS_50_75 + * @arg @ref LL_DMA_FIFOSTATUS_75_100 + * @arg @ref LL_DMA_FIFOSTATUS_EMPTY + * @arg @ref LL_DMA_FIFOSTATUS_FULL + */ +__STATIC_INLINE uint32_t LL_DMA_GetFIFOStatus(DMA_TypeDef *DMAx, uint32_t Stream) +{ + return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FS)); +} + +/** + * @brief Disable Fifo mode. + * @rmtoll FCR DMDIS LL_DMA_DisableFifoMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableFifoMode(DMA_TypeDef *DMAx, uint32_t Stream) +{ + CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_DMDIS); +} + +/** + * @brief Enable Fifo mode. + * @rmtoll FCR DMDIS LL_DMA_EnableFifoMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableFifoMode(DMA_TypeDef *DMAx, uint32_t Stream) +{ + SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_DMDIS); +} + +/** + * @brief Select FIFO threshold. + * @rmtoll FCR FTH LL_DMA_SetFIFOThreshold + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_DMA_FIFOTHRESHOLD_1_4 + * @arg @ref LL_DMA_FIFOTHRESHOLD_1_2 + * @arg @ref LL_DMA_FIFOTHRESHOLD_3_4 + * @arg @ref LL_DMA_FIFOTHRESHOLD_FULL + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetFIFOThreshold(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Threshold) +{ + MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FTH, Threshold); +} + +/** + * @brief Get FIFO threshold. + * @rmtoll FCR FTH LL_DMA_GetFIFOThreshold + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_FIFOTHRESHOLD_1_4 + * @arg @ref LL_DMA_FIFOTHRESHOLD_1_2 + * @arg @ref LL_DMA_FIFOTHRESHOLD_3_4 + * @arg @ref LL_DMA_FIFOTHRESHOLD_FULL + */ +__STATIC_INLINE uint32_t LL_DMA_GetFIFOThreshold(DMA_TypeDef *DMAx, uint32_t Stream) +{ + return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FTH)); +} + +/** + * @brief Configure the FIFO . + * @rmtoll FCR FTH LL_DMA_ConfigFifo\n + * FCR DMDIS LL_DMA_ConfigFifo + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param FifoMode This parameter can be one of the following values: + * @arg @ref LL_DMA_FIFOMODE_ENABLE + * @arg @ref LL_DMA_FIFOMODE_DISABLE + * @param FifoThreshold This parameter can be one of the following values: + * @arg @ref LL_DMA_FIFOTHRESHOLD_1_4 + * @arg @ref LL_DMA_FIFOTHRESHOLD_1_2 + * @arg @ref LL_DMA_FIFOTHRESHOLD_3_4 + * @arg @ref LL_DMA_FIFOTHRESHOLD_FULL + * @retval None + */ +__STATIC_INLINE void LL_DMA_ConfigFifo(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t FifoMode, uint32_t FifoThreshold) +{ + MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FTH|DMA_SxFCR_DMDIS, FifoMode|FifoThreshold); +} + +/** + * @brief Configure the Source and Destination addresses. + * @note This API must not be called when the DMA stream is enabled. + * @rmtoll M0AR M0A LL_DMA_ConfigAddresses\n + * PAR PA LL_DMA_ConfigAddresses + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param SrcAddress Between 0 to 0xFFFFFFFF + * @param DstAddress Between 0 to 0xFFFFFFFF + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @retval None + */ +__STATIC_INLINE void LL_DMA_ConfigAddresses(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t SrcAddress, uint32_t DstAddress, uint32_t Direction) +{ + /* Direction Memory to Periph */ + if (Direction == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) + { + WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR, SrcAddress); + WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR, DstAddress); + } + /* Direction Periph to Memory and Memory to Memory */ + else + { + WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR, SrcAddress); + WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR, DstAddress); + } +} + +/** + * @brief Set the Memory address. + * @rmtoll M0AR M0A LL_DMA_SetMemoryAddress + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @note This API must not be called when the DMA channel is enabled. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param MemoryAddress Between 0 to 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemoryAddress(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t MemoryAddress) +{ + WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR, MemoryAddress); +} + +/** + * @brief Set the Peripheral address. + * @rmtoll PAR PA LL_DMA_SetPeriphAddress + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @note This API must not be called when the DMA channel is enabled. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param PeriphAddress Between 0 to 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphAddress(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t PeriphAddress) +{ + WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR, PeriphAddress); +} + +/** + * @brief Get the Memory address. + * @rmtoll M0AR M0A LL_DMA_GetMemoryAddress + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Between 0 to 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemoryAddress(DMA_TypeDef* DMAx, uint32_t Stream) +{ + return (READ_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR)); +} + +/** + * @brief Get the Peripheral address. + * @rmtoll PAR PA LL_DMA_GetPeriphAddress + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Between 0 to 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphAddress(DMA_TypeDef* DMAx, uint32_t Stream) +{ + return (READ_REG(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR)); +} + +/** + * @brief Set the Memory to Memory Source address. + * @rmtoll PAR PA LL_DMA_SetM2MSrcAddress + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @note This API must not be called when the DMA channel is enabled. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param MemoryAddress Between 0 to 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetM2MSrcAddress(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t MemoryAddress) +{ + WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR, MemoryAddress); +} + +/** + * @brief Set the Memory to Memory Destination address. + * @rmtoll M0AR M0A LL_DMA_SetM2MDstAddress + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @note This API must not be called when the DMA channel is enabled. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param MemoryAddress Between 0 to 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetM2MDstAddress(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t MemoryAddress) + { + WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR, MemoryAddress); + } + +/** + * @brief Get the Memory to Memory Source address. + * @rmtoll PAR PA LL_DMA_GetM2MSrcAddress + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Between 0 to 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetM2MSrcAddress(DMA_TypeDef* DMAx, uint32_t Stream) + { + return (READ_REG(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR)); + } + +/** + * @brief Get the Memory to Memory Destination address. + * @rmtoll M0AR M0A LL_DMA_GetM2MDstAddress + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Between 0 to 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetM2MDstAddress(DMA_TypeDef* DMAx, uint32_t Stream) +{ + return (READ_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR)); +} + +/** + * @brief Set Memory 1 address (used in case of Double buffer mode). + * @rmtoll M1AR M1A LL_DMA_SetMemory1Address + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Address Between 0 to 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemory1Address(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Address) +{ + MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M1AR, DMA_SxM1AR_M1A, Address); +} + +/** + * @brief Get Memory 1 address (used in case of Double buffer mode). + * @rmtoll M1AR M1A LL_DMA_GetMemory1Address + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Between 0 to 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemory1Address(DMA_TypeDef *DMAx, uint32_t Stream) +{ + return (((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M1AR); +} + +/** + * @} + */ + +/** @defgroup DMA_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Stream 0 half transfer flag. + * @rmtoll LISR HTIF0 LL_DMA_IsActiveFlag_HT0 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT0(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->LISR ,DMA_LISR_HTIF0)==(DMA_LISR_HTIF0)); +} + +/** + * @brief Get Stream 1 half transfer flag. + * @rmtoll LISR HTIF1 LL_DMA_IsActiveFlag_HT1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT1(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->LISR ,DMA_LISR_HTIF1)==(DMA_LISR_HTIF1)); +} + +/** + * @brief Get Stream 2 half transfer flag. + * @rmtoll LISR HTIF2 LL_DMA_IsActiveFlag_HT2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT2(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->LISR ,DMA_LISR_HTIF2)==(DMA_LISR_HTIF2)); +} + +/** + * @brief Get Stream 3 half transfer flag. + * @rmtoll LISR HTIF3 LL_DMA_IsActiveFlag_HT3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT3(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->LISR ,DMA_LISR_HTIF3)==(DMA_LISR_HTIF3)); +} + +/** + * @brief Get Stream 4 half transfer flag. + * @rmtoll HISR HTIF4 LL_DMA_IsActiveFlag_HT4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT4(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->HISR ,DMA_HISR_HTIF4)==(DMA_HISR_HTIF4)); +} + +/** + * @brief Get Stream 5 half transfer flag. + * @rmtoll HISR HTIF0 LL_DMA_IsActiveFlag_HT5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT5(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->HISR ,DMA_HISR_HTIF5)==(DMA_HISR_HTIF5)); +} + +/** + * @brief Get Stream 6 half transfer flag. + * @rmtoll HISR HTIF6 LL_DMA_IsActiveFlag_HT6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT6(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->HISR ,DMA_HISR_HTIF6)==(DMA_HISR_HTIF6)); +} + +/** + * @brief Get Stream 7 half transfer flag. + * @rmtoll HISR HTIF7 LL_DMA_IsActiveFlag_HT7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT7(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->HISR ,DMA_HISR_HTIF7)==(DMA_HISR_HTIF7)); +} + +/** + * @brief Get Stream 0 transfer complete flag. + * @rmtoll LISR TCIF0 LL_DMA_IsActiveFlag_TC0 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC0(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->LISR ,DMA_LISR_TCIF0)==(DMA_LISR_TCIF0)); +} + +/** + * @brief Get Stream 1 transfer complete flag. + * @rmtoll LISR TCIF1 LL_DMA_IsActiveFlag_TC1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC1(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->LISR ,DMA_LISR_TCIF1)==(DMA_LISR_TCIF1)); +} + +/** + * @brief Get Stream 2 transfer complete flag. + * @rmtoll LISR TCIF2 LL_DMA_IsActiveFlag_TC2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC2(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->LISR ,DMA_LISR_TCIF2)==(DMA_LISR_TCIF2)); +} + +/** + * @brief Get Stream 3 transfer complete flag. + * @rmtoll LISR TCIF3 LL_DMA_IsActiveFlag_TC3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC3(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->LISR ,DMA_LISR_TCIF3)==(DMA_LISR_TCIF3)); +} + +/** + * @brief Get Stream 4 transfer complete flag. + * @rmtoll HISR TCIF4 LL_DMA_IsActiveFlag_TC4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC4(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->HISR ,DMA_HISR_TCIF4)==(DMA_HISR_TCIF4)); +} + +/** + * @brief Get Stream 5 transfer complete flag. + * @rmtoll HISR TCIF0 LL_DMA_IsActiveFlag_TC5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC5(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->HISR ,DMA_HISR_TCIF5)==(DMA_HISR_TCIF5)); +} + +/** + * @brief Get Stream 6 transfer complete flag. + * @rmtoll HISR TCIF6 LL_DMA_IsActiveFlag_TC6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC6(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->HISR ,DMA_HISR_TCIF6)==(DMA_HISR_TCIF6)); +} + +/** + * @brief Get Stream 7 transfer complete flag. + * @rmtoll HISR TCIF7 LL_DMA_IsActiveFlag_TC7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC7(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->HISR ,DMA_HISR_TCIF7)==(DMA_HISR_TCIF7)); +} + +/** + * @brief Get Stream 0 transfer error flag. + * @rmtoll LISR TEIF0 LL_DMA_IsActiveFlag_TE0 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE0(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->LISR ,DMA_LISR_TEIF0)==(DMA_LISR_TEIF0)); +} + +/** + * @brief Get Stream 1 transfer error flag. + * @rmtoll LISR TEIF1 LL_DMA_IsActiveFlag_TE1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE1(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->LISR ,DMA_LISR_TEIF1)==(DMA_LISR_TEIF1)); +} + +/** + * @brief Get Stream 2 transfer error flag. + * @rmtoll LISR TEIF2 LL_DMA_IsActiveFlag_TE2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE2(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->LISR ,DMA_LISR_TEIF2)==(DMA_LISR_TEIF2)); +} + +/** + * @brief Get Stream 3 transfer error flag. + * @rmtoll LISR TEIF3 LL_DMA_IsActiveFlag_TE3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE3(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->LISR ,DMA_LISR_TEIF3)==(DMA_LISR_TEIF3)); +} + +/** + * @brief Get Stream 4 transfer error flag. + * @rmtoll HISR TEIF4 LL_DMA_IsActiveFlag_TE4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE4(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->HISR ,DMA_HISR_TEIF4)==(DMA_HISR_TEIF4)); +} + +/** + * @brief Get Stream 5 transfer error flag. + * @rmtoll HISR TEIF0 LL_DMA_IsActiveFlag_TE5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE5(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->HISR ,DMA_HISR_TEIF5)==(DMA_HISR_TEIF5)); +} + +/** + * @brief Get Stream 6 transfer error flag. + * @rmtoll HISR TEIF6 LL_DMA_IsActiveFlag_TE6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE6(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->HISR ,DMA_HISR_TEIF6)==(DMA_HISR_TEIF6)); +} + +/** + * @brief Get Stream 7 transfer error flag. + * @rmtoll HISR TEIF7 LL_DMA_IsActiveFlag_TE7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE7(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->HISR ,DMA_HISR_TEIF7)==(DMA_HISR_TEIF7)); +} + +/** + * @brief Get Stream 0 direct mode error flag. + * @rmtoll LISR DMEIF0 LL_DMA_IsActiveFlag_DME0 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME0(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->LISR ,DMA_LISR_DMEIF0)==(DMA_LISR_DMEIF0)); +} + +/** + * @brief Get Stream 1 direct mode error flag. + * @rmtoll LISR DMEIF1 LL_DMA_IsActiveFlag_DME1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME1(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->LISR ,DMA_LISR_DMEIF1)==(DMA_LISR_DMEIF1)); +} + +/** + * @brief Get Stream 2 direct mode error flag. + * @rmtoll LISR DMEIF2 LL_DMA_IsActiveFlag_DME2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME2(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->LISR ,DMA_LISR_DMEIF2)==(DMA_LISR_DMEIF2)); +} + +/** + * @brief Get Stream 3 direct mode error flag. + * @rmtoll LISR DMEIF3 LL_DMA_IsActiveFlag_DME3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME3(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->LISR ,DMA_LISR_DMEIF3)==(DMA_LISR_DMEIF3)); +} + +/** + * @brief Get Stream 4 direct mode error flag. + * @rmtoll HISR DMEIF4 LL_DMA_IsActiveFlag_DME4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME4(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->HISR ,DMA_HISR_DMEIF4)==(DMA_HISR_DMEIF4)); +} + +/** + * @brief Get Stream 5 direct mode error flag. + * @rmtoll HISR DMEIF0 LL_DMA_IsActiveFlag_DME5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME5(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->HISR ,DMA_HISR_DMEIF5)==(DMA_HISR_DMEIF5)); +} + +/** + * @brief Get Stream 6 direct mode error flag. + * @rmtoll HISR DMEIF6 LL_DMA_IsActiveFlag_DME6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME6(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->HISR ,DMA_HISR_DMEIF6)==(DMA_HISR_DMEIF6)); +} + +/** + * @brief Get Stream 7 direct mode error flag. + * @rmtoll HISR DMEIF7 LL_DMA_IsActiveFlag_DME7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME7(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->HISR ,DMA_HISR_DMEIF7)==(DMA_HISR_DMEIF7)); +} + +/** + * @brief Get Stream 0 FIFO error flag. + * @rmtoll LISR FEIF0 LL_DMA_IsActiveFlag_FE0 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE0(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->LISR ,DMA_LISR_FEIF0)==(DMA_LISR_FEIF0)); +} + +/** + * @brief Get Stream 1 FIFO error flag. + * @rmtoll LISR FEIF1 LL_DMA_IsActiveFlag_FE1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE1(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->LISR ,DMA_LISR_FEIF1)==(DMA_LISR_FEIF1)); +} + +/** + * @brief Get Stream 2 FIFO error flag. + * @rmtoll LISR FEIF2 LL_DMA_IsActiveFlag_FE2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE2(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->LISR ,DMA_LISR_FEIF2)==(DMA_LISR_FEIF2)); +} + +/** + * @brief Get Stream 3 FIFO error flag. + * @rmtoll LISR FEIF3 LL_DMA_IsActiveFlag_FE3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE3(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->LISR ,DMA_LISR_FEIF3)==(DMA_LISR_FEIF3)); +} + +/** + * @brief Get Stream 4 FIFO error flag. + * @rmtoll HISR FEIF4 LL_DMA_IsActiveFlag_FE4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE4(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->HISR ,DMA_HISR_FEIF4)==(DMA_HISR_FEIF4)); +} + +/** + * @brief Get Stream 5 FIFO error flag. + * @rmtoll HISR FEIF0 LL_DMA_IsActiveFlag_FE5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE5(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->HISR ,DMA_HISR_FEIF5)==(DMA_HISR_FEIF5)); +} + +/** + * @brief Get Stream 6 FIFO error flag. + * @rmtoll HISR FEIF6 LL_DMA_IsActiveFlag_FE6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE6(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->HISR ,DMA_HISR_FEIF6)==(DMA_HISR_FEIF6)); +} + +/** + * @brief Get Stream 7 FIFO error flag. + * @rmtoll HISR FEIF7 LL_DMA_IsActiveFlag_FE7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE7(DMA_TypeDef *DMAx) +{ + return (READ_BIT(DMAx->HISR ,DMA_HISR_FEIF7)==(DMA_HISR_FEIF7)); +} + +/** + * @brief Clear Stream 0 half transfer flag. + * @rmtoll LIFCR CHTIF0 LL_DMA_ClearFlag_HT0 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT0(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CHTIF0); +} + +/** + * @brief Clear Stream 1 half transfer flag. + * @rmtoll LIFCR CHTIF1 LL_DMA_ClearFlag_HT1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CHTIF1); +} + +/** + * @brief Clear Stream 2 half transfer flag. + * @rmtoll LIFCR CHTIF2 LL_DMA_ClearFlag_HT2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CHTIF2); +} + +/** + * @brief Clear Stream 3 half transfer flag. + * @rmtoll LIFCR CHTIF3 LL_DMA_ClearFlag_HT3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CHTIF3); +} + +/** + * @brief Clear Stream 4 half transfer flag. + * @rmtoll HIFCR CHTIF4 LL_DMA_ClearFlag_HT4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CHTIF4); +} + +/** + * @brief Clear Stream 5 half transfer flag. + * @rmtoll HIFCR CHTIF5 LL_DMA_ClearFlag_HT5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CHTIF5); +} + +/** + * @brief Clear Stream 6 half transfer flag. + * @rmtoll HIFCR CHTIF6 LL_DMA_ClearFlag_HT6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CHTIF6); +} + +/** + * @brief Clear Stream 7 half transfer flag. + * @rmtoll HIFCR CHTIF7 LL_DMA_ClearFlag_HT7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CHTIF7); +} + +/** + * @brief Clear Stream 0 transfer complete flag. + * @rmtoll LIFCR CTCIF0 LL_DMA_ClearFlag_TC0 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC0(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTCIF0); +} + +/** + * @brief Clear Stream 1 transfer complete flag. + * @rmtoll LIFCR CTCIF1 LL_DMA_ClearFlag_TC1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTCIF1); +} + +/** + * @brief Clear Stream 2 transfer complete flag. + * @rmtoll LIFCR CTCIF2 LL_DMA_ClearFlag_TC2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTCIF2); +} + +/** + * @brief Clear Stream 3 transfer complete flag. + * @rmtoll LIFCR CTCIF3 LL_DMA_ClearFlag_TC3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTCIF3); +} + +/** + * @brief Clear Stream 4 transfer complete flag. + * @rmtoll HIFCR CTCIF4 LL_DMA_ClearFlag_TC4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTCIF4); +} + +/** + * @brief Clear Stream 5 transfer complete flag. + * @rmtoll HIFCR CTCIF5 LL_DMA_ClearFlag_TC5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTCIF5); +} + +/** + * @brief Clear Stream 6 transfer complete flag. + * @rmtoll HIFCR CTCIF6 LL_DMA_ClearFlag_TC6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTCIF6); +} + +/** + * @brief Clear Stream 7 transfer complete flag. + * @rmtoll HIFCR CTCIF7 LL_DMA_ClearFlag_TC7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTCIF7); +} + +/** + * @brief Clear Stream 0 transfer error flag. + * @rmtoll LIFCR CTEIF0 LL_DMA_ClearFlag_TE0 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE0(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTEIF0); +} + +/** + * @brief Clear Stream 1 transfer error flag. + * @rmtoll LIFCR CTEIF1 LL_DMA_ClearFlag_TE1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTEIF1); +} + +/** + * @brief Clear Stream 2 transfer error flag. + * @rmtoll LIFCR CTEIF2 LL_DMA_ClearFlag_TE2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTEIF2); +} + +/** + * @brief Clear Stream 3 transfer error flag. + * @rmtoll LIFCR CTEIF3 LL_DMA_ClearFlag_TE3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTEIF3); +} + +/** + * @brief Clear Stream 4 transfer error flag. + * @rmtoll HIFCR CTEIF4 LL_DMA_ClearFlag_TE4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTEIF4); +} + +/** + * @brief Clear Stream 5 transfer error flag. + * @rmtoll HIFCR CTEIF5 LL_DMA_ClearFlag_TE5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTEIF5); +} + +/** + * @brief Clear Stream 6 transfer error flag. + * @rmtoll HIFCR CTEIF6 LL_DMA_ClearFlag_TE6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTEIF6); +} + +/** + * @brief Clear Stream 7 transfer error flag. + * @rmtoll HIFCR CTEIF7 LL_DMA_ClearFlag_TE7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTEIF7); +} + +/** + * @brief Clear Stream 0 direct mode error flag. + * @rmtoll LIFCR CDMEIF0 LL_DMA_ClearFlag_DME0 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_DME0(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CDMEIF0); +} + +/** + * @brief Clear Stream 1 direct mode error flag. + * @rmtoll LIFCR CDMEIF1 LL_DMA_ClearFlag_DME1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_DME1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CDMEIF1); +} + +/** + * @brief Clear Stream 2 direct mode error flag. + * @rmtoll LIFCR CDMEIF2 LL_DMA_ClearFlag_DME2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_DME2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CDMEIF2); +} + +/** + * @brief Clear Stream 3 direct mode error flag. + * @rmtoll LIFCR CDMEIF3 LL_DMA_ClearFlag_DME3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_DME3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CDMEIF3); +} + +/** + * @brief Clear Stream 4 direct mode error flag. + * @rmtoll HIFCR CDMEIF4 LL_DMA_ClearFlag_DME4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_DME4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CDMEIF4); +} + +/** + * @brief Clear Stream 5 direct mode error flag. + * @rmtoll HIFCR CDMEIF5 LL_DMA_ClearFlag_DME5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_DME5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CDMEIF5); +} + +/** + * @brief Clear Stream 6 direct mode error flag. + * @rmtoll HIFCR CDMEIF6 LL_DMA_ClearFlag_DME6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_DME6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CDMEIF6); +} + +/** + * @brief Clear Stream 7 direct mode error flag. + * @rmtoll HIFCR CDMEIF7 LL_DMA_ClearFlag_DME7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_DME7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CDMEIF7); +} + +/** + * @brief Clear Stream 0 FIFO error flag. + * @rmtoll LIFCR CFEIF0 LL_DMA_ClearFlag_FE0 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_FE0(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CFEIF0); +} + +/** + * @brief Clear Stream 1 FIFO error flag. + * @rmtoll LIFCR CFEIF1 LL_DMA_ClearFlag_FE1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_FE1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CFEIF1); +} + +/** + * @brief Clear Stream 2 FIFO error flag. + * @rmtoll LIFCR CFEIF2 LL_DMA_ClearFlag_FE2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_FE2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CFEIF2); +} + +/** + * @brief Clear Stream 3 FIFO error flag. + * @rmtoll LIFCR CFEIF3 LL_DMA_ClearFlag_FE3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_FE3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CFEIF3); +} + +/** + * @brief Clear Stream 4 FIFO error flag. + * @rmtoll HIFCR CFEIF4 LL_DMA_ClearFlag_FE4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_FE4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CFEIF4); +} + +/** + * @brief Clear Stream 5 FIFO error flag. + * @rmtoll HIFCR CFEIF5 LL_DMA_ClearFlag_FE5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_FE5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CFEIF5); +} + +/** + * @brief Clear Stream 6 FIFO error flag. + * @rmtoll HIFCR CFEIF6 LL_DMA_ClearFlag_FE6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_FE6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CFEIF6); +} + +/** + * @brief Clear Stream 7 FIFO error flag. + * @rmtoll HIFCR CFEIF7 LL_DMA_ClearFlag_FE7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_FE7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CFEIF7); +} + +/** + * @} + */ + +/** @defgroup DMA_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable Half transfer interrupt. + * @rmtoll CR HTIE LL_DMA_EnableIT_HT + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_HT(DMA_TypeDef *DMAx, uint32_t Stream) +{ + SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_HTIE); +} + +/** + * @brief Enable Transfer error interrupt. + * @rmtoll CR TEIE LL_DMA_EnableIT_TE + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_TE(DMA_TypeDef *DMAx, uint32_t Stream) +{ + SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TEIE); +} + +/** + * @brief Enable Transfer complete interrupt. + * @rmtoll CR TCIE LL_DMA_EnableIT_TC + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_TC(DMA_TypeDef *DMAx, uint32_t Stream) +{ + SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TCIE); +} + +/** + * @brief Enable Direct mode error interrupt. + * @rmtoll CR DMEIE LL_DMA_EnableIT_DME + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_DME(DMA_TypeDef *DMAx, uint32_t Stream) +{ + SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DMEIE); +} + +/** + * @brief Enable FIFO error interrupt. + * @rmtoll FCR FEIE LL_DMA_EnableIT_FE + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_FE(DMA_TypeDef *DMAx, uint32_t Stream) +{ + SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FEIE); +} + +/** + * @brief Disable Half transfer interrupt. + * @rmtoll CR HTIE LL_DMA_DisableIT_HT + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_HT(DMA_TypeDef *DMAx, uint32_t Stream) +{ + CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_HTIE); +} + +/** + * @brief Disable Transfer error interrupt. + * @rmtoll CR TEIE LL_DMA_DisableIT_TE + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_TE(DMA_TypeDef *DMAx, uint32_t Stream) +{ + CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TEIE); +} + +/** + * @brief Disable Transfer complete interrupt. + * @rmtoll CR TCIE LL_DMA_DisableIT_TC + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_TC(DMA_TypeDef *DMAx, uint32_t Stream) +{ + CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TCIE); +} + +/** + * @brief Disable Direct mode error interrupt. + * @rmtoll CR DMEIE LL_DMA_DisableIT_DME + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_DME(DMA_TypeDef *DMAx, uint32_t Stream) +{ + CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DMEIE); +} + +/** + * @brief Disable FIFO error interrupt. + * @rmtoll FCR FEIE LL_DMA_DisableIT_FE + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_FE(DMA_TypeDef *DMAx, uint32_t Stream) +{ + CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FEIE); +} + +/** + * @brief Check if Half transfer interrupt is enabled. + * @rmtoll CR HTIE LL_DMA_IsEnabledIT_HT + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_HT(DMA_TypeDef *DMAx, uint32_t Stream) +{ + return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_HTIE) == DMA_SxCR_HTIE); +} + +/** + * @brief Check if Transfer error nterrup is enabled. + * @rmtoll CR TEIE LL_DMA_IsEnabledIT_TE + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TE(DMA_TypeDef *DMAx, uint32_t Stream) +{ + return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TEIE) == DMA_SxCR_TEIE); +} + +/** + * @brief Check if Transfer complete interrupt is enabled. + * @rmtoll CR TCIE LL_DMA_IsEnabledIT_TC + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC(DMA_TypeDef *DMAx, uint32_t Stream) +{ + return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TCIE) == DMA_SxCR_TCIE); +} + +/** + * @brief Check if Direct mode error interrupt is enabled. + * @rmtoll CR DMEIE LL_DMA_IsEnabledIT_DME + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_DME(DMA_TypeDef *DMAx, uint32_t Stream) +{ + return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DMEIE) == DMA_SxCR_DMEIE); +} + +/** + * @brief Check if FIFO error interrupt is enabled. + * @rmtoll FCR FEIE LL_DMA_IsEnabledIT_FE + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_FE(DMA_TypeDef *DMAx, uint32_t Stream) +{ + return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FEIE) == DMA_SxFCR_FEIE); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Stream, LL_DMA_InitTypeDef *DMA_InitStruct); +uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Stream); +void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMA1 || DMA2 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_LL_DMA_H */ + diff --git a/Drivers/stm32f4xx_ll_exti.h b/libs/hal/stm32f4xx_ll_exti.h similarity index 97% rename from Drivers/stm32f4xx_ll_exti.h rename to libs/hal/stm32f4xx_ll_exti.h index bef8894..65ab691 100644 --- a/Drivers/stm32f4xx_ll_exti.h +++ b/libs/hal/stm32f4xx_ll_exti.h @@ -1,954 +1,954 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_exti.h - * @author MCD Application Team - * @brief Header file of EXTI LL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS.Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_EXTI_H -#define __STM32F4xx_LL_EXTI_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined (EXTI) - -/** @defgroup EXTI_LL EXTI - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private Macros ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup EXTI_LL_Private_Macros EXTI Private Macros - * @{ - */ -/** - * @} - */ -#endif /*USE_FULL_LL_DRIVER*/ -/* Exported types ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup EXTI_LL_ES_INIT EXTI Exported Init structure - * @{ - */ -typedef struct -{ - - uint32_t Line_0_31; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 0 to 31 - This parameter can be any combination of @ref EXTI_LL_EC_LINE */ - - FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines. - This parameter can be set either to ENABLE or DISABLE */ - - uint8_t Mode; /*!< Specifies the mode for the EXTI lines. - This parameter can be a value of @ref EXTI_LL_EC_MODE. */ - - uint8_t Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines. - This parameter can be a value of @ref EXTI_LL_EC_TRIGGER. */ -} LL_EXTI_InitTypeDef; - -/** - * @} - */ -#endif /*USE_FULL_LL_DRIVER*/ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup EXTI_LL_Exported_Constants EXTI Exported Constants - * @{ - */ - -/** @defgroup EXTI_LL_EC_LINE LINE - * @{ - */ -#define LL_EXTI_LINE_0 EXTI_IMR_IM0 /*!< Extended line 0 */ -#define LL_EXTI_LINE_1 EXTI_IMR_IM1 /*!< Extended line 1 */ -#define LL_EXTI_LINE_2 EXTI_IMR_IM2 /*!< Extended line 2 */ -#define LL_EXTI_LINE_3 EXTI_IMR_IM3 /*!< Extended line 3 */ -#define LL_EXTI_LINE_4 EXTI_IMR_IM4 /*!< Extended line 4 */ -#define LL_EXTI_LINE_5 EXTI_IMR_IM5 /*!< Extended line 5 */ -#define LL_EXTI_LINE_6 EXTI_IMR_IM6 /*!< Extended line 6 */ -#define LL_EXTI_LINE_7 EXTI_IMR_IM7 /*!< Extended line 7 */ -#define LL_EXTI_LINE_8 EXTI_IMR_IM8 /*!< Extended line 8 */ -#define LL_EXTI_LINE_9 EXTI_IMR_IM9 /*!< Extended line 9 */ -#define LL_EXTI_LINE_10 EXTI_IMR_IM10 /*!< Extended line 10 */ -#define LL_EXTI_LINE_11 EXTI_IMR_IM11 /*!< Extended line 11 */ -#define LL_EXTI_LINE_12 EXTI_IMR_IM12 /*!< Extended line 12 */ -#define LL_EXTI_LINE_13 EXTI_IMR_IM13 /*!< Extended line 13 */ -#define LL_EXTI_LINE_14 EXTI_IMR_IM14 /*!< Extended line 14 */ -#define LL_EXTI_LINE_15 EXTI_IMR_IM15 /*!< Extended line 15 */ -#if defined(EXTI_IMR_IM16) -#define LL_EXTI_LINE_16 EXTI_IMR_IM16 /*!< Extended line 16 */ -#endif -#define LL_EXTI_LINE_17 EXTI_IMR_IM17 /*!< Extended line 17 */ -#if defined(EXTI_IMR_IM18) -#define LL_EXTI_LINE_18 EXTI_IMR_IM18 /*!< Extended line 18 */ -#endif -#define LL_EXTI_LINE_19 EXTI_IMR_IM19 /*!< Extended line 19 */ -#if defined(EXTI_IMR_IM20) -#define LL_EXTI_LINE_20 EXTI_IMR_IM20 /*!< Extended line 20 */ -#endif -#if defined(EXTI_IMR_IM21) -#define LL_EXTI_LINE_21 EXTI_IMR_IM21 /*!< Extended line 21 */ -#endif -#if defined(EXTI_IMR_IM22) -#define LL_EXTI_LINE_22 EXTI_IMR_IM22 /*!< Extended line 22 */ -#endif -#if defined(EXTI_IMR_IM23) -#define LL_EXTI_LINE_23 EXTI_IMR_IM23 /*!< Extended line 23 */ -#endif -#if defined(EXTI_IMR_IM24) -#define LL_EXTI_LINE_24 EXTI_IMR_IM24 /*!< Extended line 24 */ -#endif -#if defined(EXTI_IMR_IM25) -#define LL_EXTI_LINE_25 EXTI_IMR_IM25 /*!< Extended line 25 */ -#endif -#if defined(EXTI_IMR_IM26) -#define LL_EXTI_LINE_26 EXTI_IMR_IM26 /*!< Extended line 26 */ -#endif -#if defined(EXTI_IMR_IM27) -#define LL_EXTI_LINE_27 EXTI_IMR_IM27 /*!< Extended line 27 */ -#endif -#if defined(EXTI_IMR_IM28) -#define LL_EXTI_LINE_28 EXTI_IMR_IM28 /*!< Extended line 28 */ -#endif -#if defined(EXTI_IMR_IM29) -#define LL_EXTI_LINE_29 EXTI_IMR_IM29 /*!< Extended line 29 */ -#endif -#if defined(EXTI_IMR_IM30) -#define LL_EXTI_LINE_30 EXTI_IMR_IM30 /*!< Extended line 30 */ -#endif -#if defined(EXTI_IMR_IM31) -#define LL_EXTI_LINE_31 EXTI_IMR_IM31 /*!< Extended line 31 */ -#endif -#define LL_EXTI_LINE_ALL_0_31 EXTI_IMR_IM /*!< All Extended line not reserved*/ - - -#define LL_EXTI_LINE_ALL ((uint32_t)0xFFFFFFFFU) /*!< All Extended line */ - -#if defined(USE_FULL_LL_DRIVER) -#define LL_EXTI_LINE_NONE ((uint32_t)0x00000000U) /*!< None Extended line */ -#endif /*USE_FULL_LL_DRIVER*/ - -/** - * @} - */ -#if defined(USE_FULL_LL_DRIVER) - -/** @defgroup EXTI_LL_EC_MODE Mode - * @{ - */ -#define LL_EXTI_MODE_IT ((uint8_t)0x00U) /*!< Interrupt Mode */ -#define LL_EXTI_MODE_EVENT ((uint8_t)0x01U) /*!< Event Mode */ -#define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x02U) /*!< Interrupt & Event Mode */ -/** - * @} - */ - -/** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger - * @{ - */ -#define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00U) /*!< No Trigger Mode */ -#define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01U) /*!< Trigger Rising Mode */ -#define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02U) /*!< Trigger Falling Mode */ -#define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03U) /*!< Trigger Rising & Falling Mode */ - -/** - * @} - */ - - -#endif /*USE_FULL_LL_DRIVER*/ - - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup EXTI_LL_Exported_Macros EXTI Exported Macros - * @{ - */ - -/** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros - * @{ - */ - -/** - * @brief Write a value in EXTI register - * @param __REG__ Register to be written - * @param __VALUE__ Value to be written in the register - * @retval None - */ -#define LL_EXTI_WriteReg(__REG__, __VALUE__) WRITE_REG(EXTI->__REG__, (__VALUE__)) - -/** - * @brief Read a value in EXTI register - * @param __REG__ Register to be read - * @retval Register value - */ -#define LL_EXTI_ReadReg(__REG__) READ_REG(EXTI->__REG__) -/** - * @} - */ - - -/** - * @} - */ - - - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup EXTI_LL_Exported_Functions EXTI Exported Functions - * @{ - */ -/** @defgroup EXTI_LL_EF_IT_Management IT_Management - * @{ - */ - -/** - * @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31 - * @note The reset value for the direct or internal lines (see RM) - * is set to 1 in order to enable the interrupt by default. - * Bits are set automatically at Power on. - * @rmtoll IMR IMx LL_EXTI_EnableIT_0_31 - * @param ExtiLine This parameter can be one of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_17 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_23(*) - * @arg @ref LL_EXTI_LINE_ALL_0_31 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval None - */ -__STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine) -{ - SET_BIT(EXTI->IMR, ExtiLine); -} - -/** - * @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31 - * @note The reset value for the direct or internal lines (see RM) - * is set to 1 in order to enable the interrupt by default. - * Bits are set automatically at Power on. - * @rmtoll IMR IMx LL_EXTI_DisableIT_0_31 - * @param ExtiLine This parameter can be one of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_17 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_23(*) - * @arg @ref LL_EXTI_LINE_ALL_0_31 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval None - */ -__STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine) -{ - CLEAR_BIT(EXTI->IMR, ExtiLine); -} - - -/** - * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31 - * @note The reset value for the direct or internal lines (see RM) - * is set to 1 in order to enable the interrupt by default. - * Bits are set automatically at Power on. - * @rmtoll IMR IMx LL_EXTI_IsEnabledIT_0_31 - * @param ExtiLine This parameter can be one of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_17 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_23(*) - * @arg @ref LL_EXTI_LINE_ALL_0_31 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine) -{ - return (READ_BIT(EXTI->IMR, ExtiLine) == (ExtiLine)); -} - - -/** - * @} - */ - -/** @defgroup EXTI_LL_EF_Event_Management Event_Management - * @{ - */ - -/** - * @brief Enable ExtiLine Event request for Lines in range 0 to 31 - * @rmtoll EMR EMx LL_EXTI_EnableEvent_0_31 - * @param ExtiLine This parameter can be one of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_17 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_23(*) - * @arg @ref LL_EXTI_LINE_ALL_0_31 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval None - */ -__STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine) -{ - SET_BIT(EXTI->EMR, ExtiLine); - -} - - -/** - * @brief Disable ExtiLine Event request for Lines in range 0 to 31 - * @rmtoll EMR EMx LL_EXTI_DisableEvent_0_31 - * @param ExtiLine This parameter can be one of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_17 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_23(*) - * @arg @ref LL_EXTI_LINE_ALL_0_31 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval None - */ -__STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine) -{ - CLEAR_BIT(EXTI->EMR, ExtiLine); -} - - -/** - * @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31 - * @rmtoll EMR EMx LL_EXTI_IsEnabledEvent_0_31 - * @param ExtiLine This parameter can be one of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_17 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_23(*) - * @arg @ref LL_EXTI_LINE_ALL_0_31 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine) -{ - return (READ_BIT(EXTI->EMR, ExtiLine) == (ExtiLine)); - -} - - -/** - * @} - */ - -/** @defgroup EXTI_LL_EF_Rising_Trigger_Management Rising_Trigger_Management - * @{ - */ - -/** - * @brief Enable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 - * @note The configurable wakeup lines are edge-triggered. No glitch must be - * generated on these lines. If a rising edge on a configurable interrupt - * line occurs during a write operation in the EXTI_RTSR register, the - * pending bit is not set. - * Rising and falling edge triggers can be set for - * the same interrupt line. In this case, both generate a trigger - * condition. - * @rmtoll RTSR RTx LL_EXTI_EnableRisingTrig_0_31 - * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval None - */ -__STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine) -{ - SET_BIT(EXTI->RTSR, ExtiLine); - -} - - -/** - * @brief Disable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 - * @note The configurable wakeup lines are edge-triggered. No glitch must be - * generated on these lines. If a rising edge on a configurable interrupt - * line occurs during a write operation in the EXTI_RTSR register, the - * pending bit is not set. - * Rising and falling edge triggers can be set for - * the same interrupt line. In this case, both generate a trigger - * condition. - * @rmtoll RTSR RTx LL_EXTI_DisableRisingTrig_0_31 - * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval None - */ -__STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine) -{ - CLEAR_BIT(EXTI->RTSR, ExtiLine); - -} - - -/** - * @brief Check if rising edge trigger is enabled for Lines in range 0 to 31 - * @rmtoll RTSR RTx LL_EXTI_IsEnabledRisingTrig_0_31 - * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine) -{ - return (READ_BIT(EXTI->RTSR, ExtiLine) == (ExtiLine)); -} - - -/** - * @} - */ - -/** @defgroup EXTI_LL_EF_Falling_Trigger_Management Falling_Trigger_Management - * @{ - */ - -/** - * @brief Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 - * @note The configurable wakeup lines are edge-triggered. No glitch must be - * generated on these lines. If a falling edge on a configurable interrupt - * line occurs during a write operation in the EXTI_FTSR register, the - * pending bit is not set. - * Rising and falling edge triggers can be set for - * the same interrupt line. In this case, both generate a trigger - * condition. - * @rmtoll FTSR FTx LL_EXTI_EnableFallingTrig_0_31 - * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval None - */ -__STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine) -{ - SET_BIT(EXTI->FTSR, ExtiLine); -} - - -/** - * @brief Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 - * @note The configurable wakeup lines are edge-triggered. No glitch must be - * generated on these lines. If a Falling edge on a configurable interrupt - * line occurs during a write operation in the EXTI_FTSR register, the - * pending bit is not set. - * Rising and falling edge triggers can be set for the same interrupt line. - * In this case, both generate a trigger condition. - * @rmtoll FTSR FTx LL_EXTI_DisableFallingTrig_0_31 - * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval None - */ -__STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine) -{ - CLEAR_BIT(EXTI->FTSR, ExtiLine); -} - - -/** - * @brief Check if falling edge trigger is enabled for Lines in range 0 to 31 - * @rmtoll FTSR FTx LL_EXTI_IsEnabledFallingTrig_0_31 - * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31(uint32_t ExtiLine) -{ - return (READ_BIT(EXTI->FTSR, ExtiLine) == (ExtiLine)); -} - - -/** - * @} - */ - -/** @defgroup EXTI_LL_EF_Software_Interrupt_Management Software_Interrupt_Management - * @{ - */ - -/** - * @brief Generate a software Interrupt Event for Lines in range 0 to 31 - * @note If the interrupt is enabled on this line in the EXTI_IMR, writing a 1 to - * this bit when it is at '0' sets the corresponding pending bit in EXTI_PR - * resulting in an interrupt request generation. - * This bit is cleared by clearing the corresponding bit in the EXTI_PR - * register (by writing a 1 into the bit) - * @rmtoll SWIER SWIx LL_EXTI_GenerateSWI_0_31 - * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval None - */ -__STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine) -{ - SET_BIT(EXTI->SWIER, ExtiLine); -} - - -/** - * @} - */ - -/** @defgroup EXTI_LL_EF_Flag_Management Flag_Management - * @{ - */ - -/** - * @brief Check if the ExtLine Flag is set or not for Lines in range 0 to 31 - * @note This bit is set when the selected edge event arrives on the interrupt - * line. This bit is cleared by writing a 1 to the bit. - * @rmtoll PR PIFx LL_EXTI_IsActiveFlag_0_31 - * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine) -{ - return (READ_BIT(EXTI->PR, ExtiLine) == (ExtiLine)); -} - - -/** - * @brief Read ExtLine Combination Flag for Lines in range 0 to 31 - * @note This bit is set when the selected edge event arrives on the interrupt - * line. This bit is cleared by writing a 1 to the bit. - * @rmtoll PR PIFx LL_EXTI_ReadFlag_0_31 - * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval @note This bit is set when the selected edge event arrives on the interrupt - */ -__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_0_31(uint32_t ExtiLine) -{ - return (uint32_t)(READ_BIT(EXTI->PR, ExtiLine)); -} - - -/** - * @brief Clear ExtLine Flags for Lines in range 0 to 31 - * @note This bit is set when the selected edge event arrives on the interrupt - * line. This bit is cleared by writing a 1 to the bit. - * @rmtoll PR PIFx LL_EXTI_ClearFlag_0_31 - * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_0 - * @arg @ref LL_EXTI_LINE_1 - * @arg @ref LL_EXTI_LINE_2 - * @arg @ref LL_EXTI_LINE_3 - * @arg @ref LL_EXTI_LINE_4 - * @arg @ref LL_EXTI_LINE_5 - * @arg @ref LL_EXTI_LINE_6 - * @arg @ref LL_EXTI_LINE_7 - * @arg @ref LL_EXTI_LINE_8 - * @arg @ref LL_EXTI_LINE_9 - * @arg @ref LL_EXTI_LINE_10 - * @arg @ref LL_EXTI_LINE_11 - * @arg @ref LL_EXTI_LINE_12 - * @arg @ref LL_EXTI_LINE_13 - * @arg @ref LL_EXTI_LINE_14 - * @arg @ref LL_EXTI_LINE_15 - * @arg @ref LL_EXTI_LINE_16 - * @arg @ref LL_EXTI_LINE_18 - * @arg @ref LL_EXTI_LINE_19(*) - * @arg @ref LL_EXTI_LINE_20(*) - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @note (*): Available in some devices - * @note Please check each device line mapping for EXTI Line availability - * @retval None - */ -__STATIC_INLINE void LL_EXTI_ClearFlag_0_31(uint32_t ExtiLine) -{ - WRITE_REG(EXTI->PR, ExtiLine); -} - - -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup EXTI_LL_EF_Init Initialization and de-initialization functions - * @{ - */ - -uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct); -uint32_t LL_EXTI_DeInit(void); -void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct); - - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* EXTI */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_EXTI_H */ - +/** + ****************************************************************************** + * @file stm32f4xx_ll_exti.h + * @author MCD Application Team + * @brief Header file of EXTI LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS.Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_LL_EXTI_H +#define __STM32F4xx_LL_EXTI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_LL_Driver + * @{ + */ + +#if defined (EXTI) + +/** @defgroup EXTI_LL EXTI + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private Macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_Private_Macros EXTI Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_ES_INIT EXTI Exported Init structure + * @{ + */ +typedef struct +{ + + uint32_t Line_0_31; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 0 to 31 + This parameter can be any combination of @ref EXTI_LL_EC_LINE */ + + FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines. + This parameter can be set either to ENABLE or DISABLE */ + + uint8_t Mode; /*!< Specifies the mode for the EXTI lines. + This parameter can be a value of @ref EXTI_LL_EC_MODE. */ + + uint8_t Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines. + This parameter can be a value of @ref EXTI_LL_EC_TRIGGER. */ +} LL_EXTI_InitTypeDef; + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Constants EXTI Exported Constants + * @{ + */ + +/** @defgroup EXTI_LL_EC_LINE LINE + * @{ + */ +#define LL_EXTI_LINE_0 EXTI_IMR_IM0 /*!< Extended line 0 */ +#define LL_EXTI_LINE_1 EXTI_IMR_IM1 /*!< Extended line 1 */ +#define LL_EXTI_LINE_2 EXTI_IMR_IM2 /*!< Extended line 2 */ +#define LL_EXTI_LINE_3 EXTI_IMR_IM3 /*!< Extended line 3 */ +#define LL_EXTI_LINE_4 EXTI_IMR_IM4 /*!< Extended line 4 */ +#define LL_EXTI_LINE_5 EXTI_IMR_IM5 /*!< Extended line 5 */ +#define LL_EXTI_LINE_6 EXTI_IMR_IM6 /*!< Extended line 6 */ +#define LL_EXTI_LINE_7 EXTI_IMR_IM7 /*!< Extended line 7 */ +#define LL_EXTI_LINE_8 EXTI_IMR_IM8 /*!< Extended line 8 */ +#define LL_EXTI_LINE_9 EXTI_IMR_IM9 /*!< Extended line 9 */ +#define LL_EXTI_LINE_10 EXTI_IMR_IM10 /*!< Extended line 10 */ +#define LL_EXTI_LINE_11 EXTI_IMR_IM11 /*!< Extended line 11 */ +#define LL_EXTI_LINE_12 EXTI_IMR_IM12 /*!< Extended line 12 */ +#define LL_EXTI_LINE_13 EXTI_IMR_IM13 /*!< Extended line 13 */ +#define LL_EXTI_LINE_14 EXTI_IMR_IM14 /*!< Extended line 14 */ +#define LL_EXTI_LINE_15 EXTI_IMR_IM15 /*!< Extended line 15 */ +#if defined(EXTI_IMR_IM16) +#define LL_EXTI_LINE_16 EXTI_IMR_IM16 /*!< Extended line 16 */ +#endif +#define LL_EXTI_LINE_17 EXTI_IMR_IM17 /*!< Extended line 17 */ +#if defined(EXTI_IMR_IM18) +#define LL_EXTI_LINE_18 EXTI_IMR_IM18 /*!< Extended line 18 */ +#endif +#define LL_EXTI_LINE_19 EXTI_IMR_IM19 /*!< Extended line 19 */ +#if defined(EXTI_IMR_IM20) +#define LL_EXTI_LINE_20 EXTI_IMR_IM20 /*!< Extended line 20 */ +#endif +#if defined(EXTI_IMR_IM21) +#define LL_EXTI_LINE_21 EXTI_IMR_IM21 /*!< Extended line 21 */ +#endif +#if defined(EXTI_IMR_IM22) +#define LL_EXTI_LINE_22 EXTI_IMR_IM22 /*!< Extended line 22 */ +#endif +#if defined(EXTI_IMR_IM23) +#define LL_EXTI_LINE_23 EXTI_IMR_IM23 /*!< Extended line 23 */ +#endif +#if defined(EXTI_IMR_IM24) +#define LL_EXTI_LINE_24 EXTI_IMR_IM24 /*!< Extended line 24 */ +#endif +#if defined(EXTI_IMR_IM25) +#define LL_EXTI_LINE_25 EXTI_IMR_IM25 /*!< Extended line 25 */ +#endif +#if defined(EXTI_IMR_IM26) +#define LL_EXTI_LINE_26 EXTI_IMR_IM26 /*!< Extended line 26 */ +#endif +#if defined(EXTI_IMR_IM27) +#define LL_EXTI_LINE_27 EXTI_IMR_IM27 /*!< Extended line 27 */ +#endif +#if defined(EXTI_IMR_IM28) +#define LL_EXTI_LINE_28 EXTI_IMR_IM28 /*!< Extended line 28 */ +#endif +#if defined(EXTI_IMR_IM29) +#define LL_EXTI_LINE_29 EXTI_IMR_IM29 /*!< Extended line 29 */ +#endif +#if defined(EXTI_IMR_IM30) +#define LL_EXTI_LINE_30 EXTI_IMR_IM30 /*!< Extended line 30 */ +#endif +#if defined(EXTI_IMR_IM31) +#define LL_EXTI_LINE_31 EXTI_IMR_IM31 /*!< Extended line 31 */ +#endif +#define LL_EXTI_LINE_ALL_0_31 EXTI_IMR_IM /*!< All Extended line not reserved*/ + + +#define LL_EXTI_LINE_ALL ((uint32_t)0xFFFFFFFFU) /*!< All Extended line */ + +#if defined(USE_FULL_LL_DRIVER) +#define LL_EXTI_LINE_NONE ((uint32_t)0x00000000U) /*!< None Extended line */ +#endif /*USE_FULL_LL_DRIVER*/ + +/** + * @} + */ +#if defined(USE_FULL_LL_DRIVER) + +/** @defgroup EXTI_LL_EC_MODE Mode + * @{ + */ +#define LL_EXTI_MODE_IT ((uint8_t)0x00U) /*!< Interrupt Mode */ +#define LL_EXTI_MODE_EVENT ((uint8_t)0x01U) /*!< Event Mode */ +#define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x02U) /*!< Interrupt & Event Mode */ +/** + * @} + */ + +/** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger + * @{ + */ +#define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00U) /*!< No Trigger Mode */ +#define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01U) /*!< Trigger Rising Mode */ +#define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02U) /*!< Trigger Falling Mode */ +#define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03U) /*!< Trigger Rising & Falling Mode */ + +/** + * @} + */ + + +#endif /*USE_FULL_LL_DRIVER*/ + + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Macros EXTI Exported Macros + * @{ + */ + +/** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in EXTI register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_EXTI_WriteReg(__REG__, __VALUE__) WRITE_REG(EXTI->__REG__, (__VALUE__)) + +/** + * @brief Read a value in EXTI register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_EXTI_ReadReg(__REG__) READ_REG(EXTI->__REG__) +/** + * @} + */ + + +/** + * @} + */ + + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Functions EXTI Exported Functions + * @{ + */ +/** @defgroup EXTI_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31 + * @note The reset value for the direct or internal lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR IMx LL_EXTI_EnableIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19(*) + * @arg @ref LL_EXTI_LINE_20(*) + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23(*) + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note (*): Available in some devices + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->IMR, ExtiLine); +} + +/** + * @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31 + * @note The reset value for the direct or internal lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR IMx LL_EXTI_DisableIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19(*) + * @arg @ref LL_EXTI_LINE_20(*) + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23(*) + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note (*): Available in some devices + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->IMR, ExtiLine); +} + + +/** + * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31 + * @note The reset value for the direct or internal lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR IMx LL_EXTI_IsEnabledIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19(*) + * @arg @ref LL_EXTI_LINE_20(*) + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23(*) + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note (*): Available in some devices + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine) +{ + return (READ_BIT(EXTI->IMR, ExtiLine) == (ExtiLine)); +} + + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Event_Management Event_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Event request for Lines in range 0 to 31 + * @rmtoll EMR EMx LL_EXTI_EnableEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19(*) + * @arg @ref LL_EXTI_LINE_20(*) + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23(*) + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note (*): Available in some devices + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->EMR, ExtiLine); + +} + + +/** + * @brief Disable ExtiLine Event request for Lines in range 0 to 31 + * @rmtoll EMR EMx LL_EXTI_DisableEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19(*) + * @arg @ref LL_EXTI_LINE_20(*) + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23(*) + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note (*): Available in some devices + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->EMR, ExtiLine); +} + + +/** + * @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31 + * @rmtoll EMR EMx LL_EXTI_IsEnabledEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19(*) + * @arg @ref LL_EXTI_LINE_20(*) + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23(*) + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note (*): Available in some devices + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine) +{ + return (READ_BIT(EXTI->EMR, ExtiLine) == (ExtiLine)); + +} + + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Rising_Trigger_Management Rising_Trigger_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR RTx LL_EXTI_EnableRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19(*) + * @arg @ref LL_EXTI_LINE_20(*) + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @note (*): Available in some devices + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->RTSR, ExtiLine); + +} + + +/** + * @brief Disable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR RTx LL_EXTI_DisableRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19(*) + * @arg @ref LL_EXTI_LINE_20(*) + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @note (*): Available in some devices + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->RTSR, ExtiLine); + +} + + +/** + * @brief Check if rising edge trigger is enabled for Lines in range 0 to 31 + * @rmtoll RTSR RTx LL_EXTI_IsEnabledRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19(*) + * @arg @ref LL_EXTI_LINE_20(*) + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @note (*): Available in some devices + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine) +{ + return (READ_BIT(EXTI->RTSR, ExtiLine) == (ExtiLine)); +} + + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Falling_Trigger_Management Falling_Trigger_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll FTSR FTx LL_EXTI_EnableFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19(*) + * @arg @ref LL_EXTI_LINE_20(*) + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @note (*): Available in some devices + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->FTSR, ExtiLine); +} + + +/** + * @brief Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a Falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for the same interrupt line. + * In this case, both generate a trigger condition. + * @rmtoll FTSR FTx LL_EXTI_DisableFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19(*) + * @arg @ref LL_EXTI_LINE_20(*) + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @note (*): Available in some devices + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->FTSR, ExtiLine); +} + + +/** + * @brief Check if falling edge trigger is enabled for Lines in range 0 to 31 + * @rmtoll FTSR FTx LL_EXTI_IsEnabledFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19(*) + * @arg @ref LL_EXTI_LINE_20(*) + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @note (*): Available in some devices + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31(uint32_t ExtiLine) +{ + return (READ_BIT(EXTI->FTSR, ExtiLine) == (ExtiLine)); +} + + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Software_Interrupt_Management Software_Interrupt_Management + * @{ + */ + +/** + * @brief Generate a software Interrupt Event for Lines in range 0 to 31 + * @note If the interrupt is enabled on this line in the EXTI_IMR, writing a 1 to + * this bit when it is at '0' sets the corresponding pending bit in EXTI_PR + * resulting in an interrupt request generation. + * This bit is cleared by clearing the corresponding bit in the EXTI_PR + * register (by writing a 1 into the bit) + * @rmtoll SWIER SWIx LL_EXTI_GenerateSWI_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19(*) + * @arg @ref LL_EXTI_LINE_20(*) + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @note (*): Available in some devices + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->SWIER, ExtiLine); +} + + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Flag_Management Flag_Management + * @{ + */ + +/** + * @brief Check if the ExtLine Flag is set or not for Lines in range 0 to 31 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR PIFx LL_EXTI_IsActiveFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19(*) + * @arg @ref LL_EXTI_LINE_20(*) + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @note (*): Available in some devices + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine) +{ + return (READ_BIT(EXTI->PR, ExtiLine) == (ExtiLine)); +} + + +/** + * @brief Read ExtLine Combination Flag for Lines in range 0 to 31 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR PIFx LL_EXTI_ReadFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19(*) + * @arg @ref LL_EXTI_LINE_20(*) + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @note (*): Available in some devices + * @note Please check each device line mapping for EXTI Line availability + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_0_31(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(EXTI->PR, ExtiLine)); +} + + +/** + * @brief Clear ExtLine Flags for Lines in range 0 to 31 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR PIFx LL_EXTI_ClearFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19(*) + * @arg @ref LL_EXTI_LINE_20(*) + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @note (*): Available in some devices + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_ClearFlag_0_31(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->PR, ExtiLine); +} + + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct); +uint32_t LL_EXTI_DeInit(void); +void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct); + + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* EXTI */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_LL_EXTI_H */ + diff --git a/Drivers/stm32f4xx_ll_gpio.h b/libs/hal/stm32f4xx_ll_gpio.h similarity index 97% rename from Drivers/stm32f4xx_ll_gpio.h rename to libs/hal/stm32f4xx_ll_gpio.h index 9d5b34c..6bee7fd 100644 --- a/Drivers/stm32f4xx_ll_gpio.h +++ b/libs/hal/stm32f4xx_ll_gpio.h @@ -1,981 +1,981 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_gpio.h - * @author MCD Application Team - * @brief Header file of GPIO LL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_GPIO_H -#define __STM32F4xx_LL_GPIO_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI) || defined (GPIOJ) || defined (GPIOK) - -/** @defgroup GPIO_LL GPIO - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup GPIO_LL_Private_Macros GPIO Private Macros - * @{ - */ - -/** - * @} - */ -#endif /*USE_FULL_LL_DRIVER*/ - -/* Exported types ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup GPIO_LL_ES_INIT GPIO Exported Init structures - * @{ - */ - -/** - * @brief LL GPIO Init Structure definition - */ -typedef struct -{ - uint32_t Pin; /*!< Specifies the GPIO pins to be configured. - This parameter can be any value of @ref GPIO_LL_EC_PIN */ - - uint32_t Mode; /*!< Specifies the operating mode for the selected pins. - This parameter can be a value of @ref GPIO_LL_EC_MODE. - - GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinMode().*/ - - uint32_t Speed; /*!< Specifies the speed for the selected pins. - This parameter can be a value of @ref GPIO_LL_EC_SPEED. - - GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinSpeed().*/ - - uint32_t OutputType; /*!< Specifies the operating output type for the selected pins. - This parameter can be a value of @ref GPIO_LL_EC_OUTPUT. - - GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinOutputType().*/ - - uint32_t Pull; /*!< Specifies the operating Pull-up/Pull down for the selected pins. - This parameter can be a value of @ref GPIO_LL_EC_PULL. - - GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinPull().*/ - - uint32_t Alternate; /*!< Specifies the Peripheral to be connected to the selected pins. - This parameter can be a value of @ref GPIO_LL_EC_AF. - - GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetAFPin_0_7() and LL_GPIO_SetAFPin_8_15().*/ -} LL_GPIO_InitTypeDef; - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup GPIO_LL_Exported_Constants GPIO Exported Constants - * @{ - */ - -/** @defgroup GPIO_LL_EC_PIN PIN - * @{ - */ -#define LL_GPIO_PIN_0 GPIO_BSRR_BS_0 /*!< Select pin 0 */ -#define LL_GPIO_PIN_1 GPIO_BSRR_BS_1 /*!< Select pin 1 */ -#define LL_GPIO_PIN_2 GPIO_BSRR_BS_2 /*!< Select pin 2 */ -#define LL_GPIO_PIN_3 GPIO_BSRR_BS_3 /*!< Select pin 3 */ -#define LL_GPIO_PIN_4 GPIO_BSRR_BS_4 /*!< Select pin 4 */ -#define LL_GPIO_PIN_5 GPIO_BSRR_BS_5 /*!< Select pin 5 */ -#define LL_GPIO_PIN_6 GPIO_BSRR_BS_6 /*!< Select pin 6 */ -#define LL_GPIO_PIN_7 GPIO_BSRR_BS_7 /*!< Select pin 7 */ -#define LL_GPIO_PIN_8 GPIO_BSRR_BS_8 /*!< Select pin 8 */ -#define LL_GPIO_PIN_9 GPIO_BSRR_BS_9 /*!< Select pin 9 */ -#define LL_GPIO_PIN_10 GPIO_BSRR_BS_10 /*!< Select pin 10 */ -#define LL_GPIO_PIN_11 GPIO_BSRR_BS_11 /*!< Select pin 11 */ -#define LL_GPIO_PIN_12 GPIO_BSRR_BS_12 /*!< Select pin 12 */ -#define LL_GPIO_PIN_13 GPIO_BSRR_BS_13 /*!< Select pin 13 */ -#define LL_GPIO_PIN_14 GPIO_BSRR_BS_14 /*!< Select pin 14 */ -#define LL_GPIO_PIN_15 GPIO_BSRR_BS_15 /*!< Select pin 15 */ -#define LL_GPIO_PIN_ALL (GPIO_BSRR_BS_0 | GPIO_BSRR_BS_1 | GPIO_BSRR_BS_2 | \ - GPIO_BSRR_BS_3 | GPIO_BSRR_BS_4 | GPIO_BSRR_BS_5 | \ - GPIO_BSRR_BS_6 | GPIO_BSRR_BS_7 | GPIO_BSRR_BS_8 | \ - GPIO_BSRR_BS_9 | GPIO_BSRR_BS_10 | GPIO_BSRR_BS_11 | \ - GPIO_BSRR_BS_12 | GPIO_BSRR_BS_13 | GPIO_BSRR_BS_14 | \ - GPIO_BSRR_BS_15) /*!< Select all pins */ -/** - * @} - */ - -/** @defgroup GPIO_LL_EC_MODE Mode - * @{ - */ -#define LL_GPIO_MODE_INPUT (0x00000000U) /*!< Select input mode */ -#define LL_GPIO_MODE_OUTPUT GPIO_MODER_MODER0_0 /*!< Select output mode */ -#define LL_GPIO_MODE_ALTERNATE GPIO_MODER_MODER0_1 /*!< Select alternate function mode */ -#define LL_GPIO_MODE_ANALOG GPIO_MODER_MODER0 /*!< Select analog mode */ -/** - * @} - */ - -/** @defgroup GPIO_LL_EC_OUTPUT Output Type - * @{ - */ -#define LL_GPIO_OUTPUT_PUSHPULL (0x00000000U) /*!< Select push-pull as output type */ -#define LL_GPIO_OUTPUT_OPENDRAIN GPIO_OTYPER_OT_0 /*!< Select open-drain as output type */ -/** - * @} - */ - -/** @defgroup GPIO_LL_EC_SPEED Output Speed - * @{ - */ -#define LL_GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< Select I/O low output speed */ -#define LL_GPIO_SPEED_FREQ_MEDIUM GPIO_OSPEEDER_OSPEEDR0_0 /*!< Select I/O medium output speed */ -#define LL_GPIO_SPEED_FREQ_HIGH GPIO_OSPEEDER_OSPEEDR0_1 /*!< Select I/O fast output speed */ -#define LL_GPIO_SPEED_FREQ_VERY_HIGH GPIO_OSPEEDER_OSPEEDR0 /*!< Select I/O high output speed */ -/** - * @} - */ - -/** @defgroup GPIO_LL_EC_PULL Pull Up Pull Down - * @{ - */ -#define LL_GPIO_PULL_NO (0x00000000U) /*!< Select I/O no pull */ -#define LL_GPIO_PULL_UP GPIO_PUPDR_PUPDR0_0 /*!< Select I/O pull up */ -#define LL_GPIO_PULL_DOWN GPIO_PUPDR_PUPDR0_1 /*!< Select I/O pull down */ -/** - * @} - */ - -/** @defgroup GPIO_LL_EC_AF Alternate Function - * @{ - */ -#define LL_GPIO_AF_0 (0x0000000U) /*!< Select alternate function 0 */ -#define LL_GPIO_AF_1 (0x0000001U) /*!< Select alternate function 1 */ -#define LL_GPIO_AF_2 (0x0000002U) /*!< Select alternate function 2 */ -#define LL_GPIO_AF_3 (0x0000003U) /*!< Select alternate function 3 */ -#define LL_GPIO_AF_4 (0x0000004U) /*!< Select alternate function 4 */ -#define LL_GPIO_AF_5 (0x0000005U) /*!< Select alternate function 5 */ -#define LL_GPIO_AF_6 (0x0000006U) /*!< Select alternate function 6 */ -#define LL_GPIO_AF_7 (0x0000007U) /*!< Select alternate function 7 */ -#define LL_GPIO_AF_8 (0x0000008U) /*!< Select alternate function 8 */ -#define LL_GPIO_AF_9 (0x0000009U) /*!< Select alternate function 9 */ -#define LL_GPIO_AF_10 (0x000000AU) /*!< Select alternate function 10 */ -#define LL_GPIO_AF_11 (0x000000BU) /*!< Select alternate function 11 */ -#define LL_GPIO_AF_12 (0x000000CU) /*!< Select alternate function 12 */ -#define LL_GPIO_AF_13 (0x000000DU) /*!< Select alternate function 13 */ -#define LL_GPIO_AF_14 (0x000000EU) /*!< Select alternate function 14 */ -#define LL_GPIO_AF_15 (0x000000FU) /*!< Select alternate function 15 */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup GPIO_LL_Exported_Macros GPIO Exported Macros - * @{ - */ - -/** @defgroup GPIO_LL_EM_WRITE_READ Common Write and read registers Macros - * @{ - */ - -/** - * @brief Write a value in GPIO register - * @param __INSTANCE__ GPIO Instance - * @param __REG__ Register to be written - * @param __VALUE__ Value to be written in the register - * @retval None - */ -#define LL_GPIO_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) - -/** - * @brief Read a value in GPIO register - * @param __INSTANCE__ GPIO Instance - * @param __REG__ Register to be read - * @retval Register value - */ -#define LL_GPIO_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup GPIO_LL_Exported_Functions GPIO Exported Functions - * @{ - */ - -/** @defgroup GPIO_LL_EF_Port_Configuration Port Configuration - * @{ - */ - -/** - * @brief Configure gpio mode for a dedicated pin on dedicated port. - * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. - * @note Warning: only one pin can be passed as parameter. - * @rmtoll MODER MODEy LL_GPIO_SetPinMode - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @param Mode This parameter can be one of the following values: - * @arg @ref LL_GPIO_MODE_INPUT - * @arg @ref LL_GPIO_MODE_OUTPUT - * @arg @ref LL_GPIO_MODE_ALTERNATE - * @arg @ref LL_GPIO_MODE_ANALOG - * @retval None - */ -__STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode) -{ - MODIFY_REG(GPIOx->MODER, (GPIO_MODER_MODER0 << (POSITION_VAL(Pin) * 2U)), (Mode << (POSITION_VAL(Pin) * 2U))); -} - -/** - * @brief Return gpio mode for a dedicated pin on dedicated port. - * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. - * @note Warning: only one pin can be passed as parameter. - * @rmtoll MODER MODEy LL_GPIO_GetPinMode - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @retval Returned value can be one of the following values: - * @arg @ref LL_GPIO_MODE_INPUT - * @arg @ref LL_GPIO_MODE_OUTPUT - * @arg @ref LL_GPIO_MODE_ALTERNATE - * @arg @ref LL_GPIO_MODE_ANALOG - */ -__STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin) -{ - return (uint32_t)(READ_BIT(GPIOx->MODER, - (GPIO_MODER_MODER0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U)); -} - -/** - * @brief Configure gpio output type for several pins on dedicated port. - * @note Output type as to be set when gpio pin is in output or - * alternate modes. Possible type are Push-pull or Open-drain. - * @rmtoll OTYPER OTy LL_GPIO_SetPinOutputType - * @param GPIOx GPIO Port - * @param PinMask This parameter can be a combination of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @arg @ref LL_GPIO_PIN_ALL - * @param OutputType This parameter can be one of the following values: - * @arg @ref LL_GPIO_OUTPUT_PUSHPULL - * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN - * @retval None - */ -__STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType) -{ - MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType)); -} - -/** - * @brief Return gpio output type for several pins on dedicated port. - * @note Output type as to be set when gpio pin is in output or - * alternate modes. Possible type are Push-pull or Open-drain. - * @note Warning: only one pin can be passed as parameter. - * @rmtoll OTYPER OTy LL_GPIO_GetPinOutputType - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @arg @ref LL_GPIO_PIN_ALL - * @retval Returned value can be one of the following values: - * @arg @ref LL_GPIO_OUTPUT_PUSHPULL - * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN - */ -__STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin) -{ - return (uint32_t)(READ_BIT(GPIOx->OTYPER, Pin) >> POSITION_VAL(Pin)); -} - -/** - * @brief Configure gpio speed for a dedicated pin on dedicated port. - * @note I/O speed can be Low, Medium, Fast or High speed. - * @note Warning: only one pin can be passed as parameter. - * @note Refer to datasheet for frequency specifications and the power - * supply and load conditions for each speed. - * @rmtoll OSPEEDR OSPEEDy LL_GPIO_SetPinSpeed - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @param Speed This parameter can be one of the following values: - * @arg @ref LL_GPIO_SPEED_FREQ_LOW - * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM - * @arg @ref LL_GPIO_SPEED_FREQ_HIGH - * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH - * @retval None - */ -__STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Speed) -{ - MODIFY_REG(GPIOx->OSPEEDR, (GPIO_OSPEEDER_OSPEEDR0 << (POSITION_VAL(Pin) * 2U)), - (Speed << (POSITION_VAL(Pin) * 2U))); -} - -/** - * @brief Return gpio speed for a dedicated pin on dedicated port. - * @note I/O speed can be Low, Medium, Fast or High speed. - * @note Warning: only one pin can be passed as parameter. - * @note Refer to datasheet for frequency specifications and the power - * supply and load conditions for each speed. - * @rmtoll OSPEEDR OSPEEDy LL_GPIO_GetPinSpeed - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @retval Returned value can be one of the following values: - * @arg @ref LL_GPIO_SPEED_FREQ_LOW - * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM - * @arg @ref LL_GPIO_SPEED_FREQ_HIGH - * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH - */ -__STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin) -{ - return (uint32_t)(READ_BIT(GPIOx->OSPEEDR, - (GPIO_OSPEEDER_OSPEEDR0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U)); -} - -/** - * @brief Configure gpio pull-up or pull-down for a dedicated pin on a dedicated port. - * @note Warning: only one pin can be passed as parameter. - * @rmtoll PUPDR PUPDy LL_GPIO_SetPinPull - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @param Pull This parameter can be one of the following values: - * @arg @ref LL_GPIO_PULL_NO - * @arg @ref LL_GPIO_PULL_UP - * @arg @ref LL_GPIO_PULL_DOWN - * @retval None - */ -__STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull) -{ - MODIFY_REG(GPIOx->PUPDR, (GPIO_PUPDR_PUPDR0 << (POSITION_VAL(Pin) * 2U)), (Pull << (POSITION_VAL(Pin) * 2U))); -} - -/** - * @brief Return gpio pull-up or pull-down for a dedicated pin on a dedicated port - * @note Warning: only one pin can be passed as parameter. - * @rmtoll PUPDR PUPDy LL_GPIO_GetPinPull - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @retval Returned value can be one of the following values: - * @arg @ref LL_GPIO_PULL_NO - * @arg @ref LL_GPIO_PULL_UP - * @arg @ref LL_GPIO_PULL_DOWN - */ -__STATIC_INLINE uint32_t LL_GPIO_GetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin) -{ - return (uint32_t)(READ_BIT(GPIOx->PUPDR, - (GPIO_PUPDR_PUPDR0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U)); -} - -/** - * @brief Configure gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. - * @note Possible values are from AF0 to AF15 depending on target. - * @note Warning: only one pin can be passed as parameter. - * @rmtoll AFRL AFSELy LL_GPIO_SetAFPin_0_7 - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @param Alternate This parameter can be one of the following values: - * @arg @ref LL_GPIO_AF_0 - * @arg @ref LL_GPIO_AF_1 - * @arg @ref LL_GPIO_AF_2 - * @arg @ref LL_GPIO_AF_3 - * @arg @ref LL_GPIO_AF_4 - * @arg @ref LL_GPIO_AF_5 - * @arg @ref LL_GPIO_AF_6 - * @arg @ref LL_GPIO_AF_7 - * @arg @ref LL_GPIO_AF_8 - * @arg @ref LL_GPIO_AF_9 - * @arg @ref LL_GPIO_AF_10 - * @arg @ref LL_GPIO_AF_11 - * @arg @ref LL_GPIO_AF_12 - * @arg @ref LL_GPIO_AF_13 - * @arg @ref LL_GPIO_AF_14 - * @arg @ref LL_GPIO_AF_15 - * @retval None - */ -__STATIC_INLINE void LL_GPIO_SetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) -{ - MODIFY_REG(GPIOx->AFR[0], (GPIO_AFRL_AFSEL0 << (POSITION_VAL(Pin) * 4U)), - (Alternate << (POSITION_VAL(Pin) * 4U))); -} - -/** - * @brief Return gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. - * @rmtoll AFRL AFSELy LL_GPIO_GetAFPin_0_7 - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @retval Returned value can be one of the following values: - * @arg @ref LL_GPIO_AF_0 - * @arg @ref LL_GPIO_AF_1 - * @arg @ref LL_GPIO_AF_2 - * @arg @ref LL_GPIO_AF_3 - * @arg @ref LL_GPIO_AF_4 - * @arg @ref LL_GPIO_AF_5 - * @arg @ref LL_GPIO_AF_6 - * @arg @ref LL_GPIO_AF_7 - * @arg @ref LL_GPIO_AF_8 - * @arg @ref LL_GPIO_AF_9 - * @arg @ref LL_GPIO_AF_10 - * @arg @ref LL_GPIO_AF_11 - * @arg @ref LL_GPIO_AF_12 - * @arg @ref LL_GPIO_AF_13 - * @arg @ref LL_GPIO_AF_14 - * @arg @ref LL_GPIO_AF_15 - */ -__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin) -{ - return (uint32_t)(READ_BIT(GPIOx->AFR[0], - (GPIO_AFRL_AFSEL0 << (POSITION_VAL(Pin) * 4U))) >> (POSITION_VAL(Pin) * 4U)); -} - -/** - * @brief Configure gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. - * @note Possible values are from AF0 to AF15 depending on target. - * @note Warning: only one pin can be passed as parameter. - * @rmtoll AFRH AFSELy LL_GPIO_SetAFPin_8_15 - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @param Alternate This parameter can be one of the following values: - * @arg @ref LL_GPIO_AF_0 - * @arg @ref LL_GPIO_AF_1 - * @arg @ref LL_GPIO_AF_2 - * @arg @ref LL_GPIO_AF_3 - * @arg @ref LL_GPIO_AF_4 - * @arg @ref LL_GPIO_AF_5 - * @arg @ref LL_GPIO_AF_6 - * @arg @ref LL_GPIO_AF_7 - * @arg @ref LL_GPIO_AF_8 - * @arg @ref LL_GPIO_AF_9 - * @arg @ref LL_GPIO_AF_10 - * @arg @ref LL_GPIO_AF_11 - * @arg @ref LL_GPIO_AF_12 - * @arg @ref LL_GPIO_AF_13 - * @arg @ref LL_GPIO_AF_14 - * @arg @ref LL_GPIO_AF_15 - * @retval None - */ -__STATIC_INLINE void LL_GPIO_SetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) -{ - MODIFY_REG(GPIOx->AFR[1], (GPIO_AFRH_AFSEL8 << (POSITION_VAL(Pin >> 8U) * 4U)), - (Alternate << (POSITION_VAL(Pin >> 8U) * 4U))); -} - -/** - * @brief Return gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. - * @note Possible values are from AF0 to AF15 depending on target. - * @rmtoll AFRH AFSELy LL_GPIO_GetAFPin_8_15 - * @param GPIOx GPIO Port - * @param Pin This parameter can be one of the following values: - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @retval Returned value can be one of the following values: - * @arg @ref LL_GPIO_AF_0 - * @arg @ref LL_GPIO_AF_1 - * @arg @ref LL_GPIO_AF_2 - * @arg @ref LL_GPIO_AF_3 - * @arg @ref LL_GPIO_AF_4 - * @arg @ref LL_GPIO_AF_5 - * @arg @ref LL_GPIO_AF_6 - * @arg @ref LL_GPIO_AF_7 - * @arg @ref LL_GPIO_AF_8 - * @arg @ref LL_GPIO_AF_9 - * @arg @ref LL_GPIO_AF_10 - * @arg @ref LL_GPIO_AF_11 - * @arg @ref LL_GPIO_AF_12 - * @arg @ref LL_GPIO_AF_13 - * @arg @ref LL_GPIO_AF_14 - * @arg @ref LL_GPIO_AF_15 - */ -__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin) -{ - return (uint32_t)(READ_BIT(GPIOx->AFR[1], - (GPIO_AFRH_AFSEL8 << (POSITION_VAL(Pin >> 8U) * 4U))) >> (POSITION_VAL(Pin >> 8U) * 4U)); -} - - -/** - * @brief Lock configuration of several pins for a dedicated port. - * @note When the lock sequence has been applied on a port bit, the - * value of this port bit can no longer be modified until the - * next reset. - * @note Each lock bit freezes a specific configuration register - * (control and alternate function registers). - * @rmtoll LCKR LCKK LL_GPIO_LockPin - * @param GPIOx GPIO Port - * @param PinMask This parameter can be a combination of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @arg @ref LL_GPIO_PIN_ALL - * @retval None - */ -__STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) -{ - __IO uint32_t temp; - WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); - WRITE_REG(GPIOx->LCKR, PinMask); - WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); - temp = READ_REG(GPIOx->LCKR); - (void) temp; -} - -/** - * @brief Return 1 if all pins passed as parameter, of a dedicated port, are locked. else Return 0. - * @rmtoll LCKR LCKy LL_GPIO_IsPinLocked - * @param GPIOx GPIO Port - * @param PinMask This parameter can be a combination of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @arg @ref LL_GPIO_PIN_ALL - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_GPIO_IsPinLocked(GPIO_TypeDef *GPIOx, uint32_t PinMask) -{ - return (READ_BIT(GPIOx->LCKR, PinMask) == (PinMask)); -} - -/** - * @brief Return 1 if one of the pin of a dedicated port is locked. else return 0. - * @rmtoll LCKR LCKK LL_GPIO_IsAnyPinLocked - * @param GPIOx GPIO Port - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_GPIO_IsAnyPinLocked(GPIO_TypeDef *GPIOx) -{ - return (READ_BIT(GPIOx->LCKR, GPIO_LCKR_LCKK) == (GPIO_LCKR_LCKK)); -} - -/** - * @} - */ - -/** @defgroup GPIO_LL_EF_Data_Access Data Access - * @{ - */ - -/** - * @brief Return full input data register value for a dedicated port. - * @rmtoll IDR IDy LL_GPIO_ReadInputPort - * @param GPIOx GPIO Port - * @retval Input data register value of port - */ -__STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(GPIO_TypeDef *GPIOx) -{ - return (uint32_t)(READ_REG(GPIOx->IDR)); -} - -/** - * @brief Return if input data level for several pins of dedicated port is high or low. - * @rmtoll IDR IDy LL_GPIO_IsInputPinSet - * @param GPIOx GPIO Port - * @param PinMask This parameter can be a combination of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @arg @ref LL_GPIO_PIN_ALL - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_GPIO_IsInputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) -{ - return (READ_BIT(GPIOx->IDR, PinMask) == (PinMask)); -} - -/** - * @brief Write output data register for the port. - * @rmtoll ODR ODy LL_GPIO_WriteOutputPort - * @param GPIOx GPIO Port - * @param PortValue Level value for each pin of the port - * @retval None - */ -__STATIC_INLINE void LL_GPIO_WriteOutputPort(GPIO_TypeDef *GPIOx, uint32_t PortValue) -{ - WRITE_REG(GPIOx->ODR, PortValue); -} - -/** - * @brief Return full output data register value for a dedicated port. - * @rmtoll ODR ODy LL_GPIO_ReadOutputPort - * @param GPIOx GPIO Port - * @retval Output data register value of port - */ -__STATIC_INLINE uint32_t LL_GPIO_ReadOutputPort(GPIO_TypeDef *GPIOx) -{ - return (uint32_t)(READ_REG(GPIOx->ODR)); -} - -/** - * @brief Return if input data level for several pins of dedicated port is high or low. - * @rmtoll ODR ODy LL_GPIO_IsOutputPinSet - * @param GPIOx GPIO Port - * @param PinMask This parameter can be a combination of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @arg @ref LL_GPIO_PIN_ALL - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) -{ - return (READ_BIT(GPIOx->ODR, PinMask) == (PinMask)); -} - -/** - * @brief Set several pins to high level on dedicated gpio port. - * @rmtoll BSRR BSy LL_GPIO_SetOutputPin - * @param GPIOx GPIO Port - * @param PinMask This parameter can be a combination of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @arg @ref LL_GPIO_PIN_ALL - * @retval None - */ -__STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) -{ - WRITE_REG(GPIOx->BSRR, PinMask); -} - -/** - * @brief Set several pins to low level on dedicated gpio port. - * @rmtoll BSRR BRy LL_GPIO_ResetOutputPin - * @param GPIOx GPIO Port - * @param PinMask This parameter can be a combination of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @arg @ref LL_GPIO_PIN_ALL - * @retval None - */ -__STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) -{ - WRITE_REG(GPIOx->BSRR, (PinMask << 16)); -} - -/** - * @brief Toggle data value for several pin of dedicated port. - * @rmtoll ODR ODy LL_GPIO_TogglePin - * @param GPIOx GPIO Port - * @param PinMask This parameter can be a combination of the following values: - * @arg @ref LL_GPIO_PIN_0 - * @arg @ref LL_GPIO_PIN_1 - * @arg @ref LL_GPIO_PIN_2 - * @arg @ref LL_GPIO_PIN_3 - * @arg @ref LL_GPIO_PIN_4 - * @arg @ref LL_GPIO_PIN_5 - * @arg @ref LL_GPIO_PIN_6 - * @arg @ref LL_GPIO_PIN_7 - * @arg @ref LL_GPIO_PIN_8 - * @arg @ref LL_GPIO_PIN_9 - * @arg @ref LL_GPIO_PIN_10 - * @arg @ref LL_GPIO_PIN_11 - * @arg @ref LL_GPIO_PIN_12 - * @arg @ref LL_GPIO_PIN_13 - * @arg @ref LL_GPIO_PIN_14 - * @arg @ref LL_GPIO_PIN_15 - * @arg @ref LL_GPIO_PIN_ALL - * @retval None - */ -__STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask) -{ - uint32_t odr = READ_REG(GPIOx->ODR); - WRITE_REG(GPIOx->BSRR, ((odr & PinMask) << 16u) | (~odr & PinMask)); -} - -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup GPIO_LL_EF_Init Initialization and de-initialization functions - * @{ - */ - -ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx); -ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct); -void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct); - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI) || defined (GPIOJ) || defined (GPIOK) */ -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_GPIO_H */ - +/** + ****************************************************************************** + * @file stm32f4xx_ll_gpio.h + * @author MCD Application Team + * @brief Header file of GPIO LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_LL_GPIO_H +#define __STM32F4xx_LL_GPIO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_LL_Driver + * @{ + */ + +#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI) || defined (GPIOJ) || defined (GPIOK) + +/** @defgroup GPIO_LL GPIO + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_Private_Macros GPIO Private Macros + * @{ + */ + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_ES_INIT GPIO Exported Init structures + * @{ + */ + +/** + * @brief LL GPIO Init Structure definition + */ +typedef struct +{ + uint32_t Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_LL_EC_PIN */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_MODE. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinMode().*/ + + uint32_t Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_SPEED. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinSpeed().*/ + + uint32_t OutputType; /*!< Specifies the operating output type for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_OUTPUT. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinOutputType().*/ + + uint32_t Pull; /*!< Specifies the operating Pull-up/Pull down for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_PULL. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinPull().*/ + + uint32_t Alternate; /*!< Specifies the Peripheral to be connected to the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_AF. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetAFPin_0_7() and LL_GPIO_SetAFPin_8_15().*/ +} LL_GPIO_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Constants GPIO Exported Constants + * @{ + */ + +/** @defgroup GPIO_LL_EC_PIN PIN + * @{ + */ +#define LL_GPIO_PIN_0 GPIO_BSRR_BS_0 /*!< Select pin 0 */ +#define LL_GPIO_PIN_1 GPIO_BSRR_BS_1 /*!< Select pin 1 */ +#define LL_GPIO_PIN_2 GPIO_BSRR_BS_2 /*!< Select pin 2 */ +#define LL_GPIO_PIN_3 GPIO_BSRR_BS_3 /*!< Select pin 3 */ +#define LL_GPIO_PIN_4 GPIO_BSRR_BS_4 /*!< Select pin 4 */ +#define LL_GPIO_PIN_5 GPIO_BSRR_BS_5 /*!< Select pin 5 */ +#define LL_GPIO_PIN_6 GPIO_BSRR_BS_6 /*!< Select pin 6 */ +#define LL_GPIO_PIN_7 GPIO_BSRR_BS_7 /*!< Select pin 7 */ +#define LL_GPIO_PIN_8 GPIO_BSRR_BS_8 /*!< Select pin 8 */ +#define LL_GPIO_PIN_9 GPIO_BSRR_BS_9 /*!< Select pin 9 */ +#define LL_GPIO_PIN_10 GPIO_BSRR_BS_10 /*!< Select pin 10 */ +#define LL_GPIO_PIN_11 GPIO_BSRR_BS_11 /*!< Select pin 11 */ +#define LL_GPIO_PIN_12 GPIO_BSRR_BS_12 /*!< Select pin 12 */ +#define LL_GPIO_PIN_13 GPIO_BSRR_BS_13 /*!< Select pin 13 */ +#define LL_GPIO_PIN_14 GPIO_BSRR_BS_14 /*!< Select pin 14 */ +#define LL_GPIO_PIN_15 GPIO_BSRR_BS_15 /*!< Select pin 15 */ +#define LL_GPIO_PIN_ALL (GPIO_BSRR_BS_0 | GPIO_BSRR_BS_1 | GPIO_BSRR_BS_2 | \ + GPIO_BSRR_BS_3 | GPIO_BSRR_BS_4 | GPIO_BSRR_BS_5 | \ + GPIO_BSRR_BS_6 | GPIO_BSRR_BS_7 | GPIO_BSRR_BS_8 | \ + GPIO_BSRR_BS_9 | GPIO_BSRR_BS_10 | GPIO_BSRR_BS_11 | \ + GPIO_BSRR_BS_12 | GPIO_BSRR_BS_13 | GPIO_BSRR_BS_14 | \ + GPIO_BSRR_BS_15) /*!< Select all pins */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_MODE Mode + * @{ + */ +#define LL_GPIO_MODE_INPUT (0x00000000U) /*!< Select input mode */ +#define LL_GPIO_MODE_OUTPUT GPIO_MODER_MODER0_0 /*!< Select output mode */ +#define LL_GPIO_MODE_ALTERNATE GPIO_MODER_MODER0_1 /*!< Select alternate function mode */ +#define LL_GPIO_MODE_ANALOG GPIO_MODER_MODER0 /*!< Select analog mode */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_OUTPUT Output Type + * @{ + */ +#define LL_GPIO_OUTPUT_PUSHPULL (0x00000000U) /*!< Select push-pull as output type */ +#define LL_GPIO_OUTPUT_OPENDRAIN GPIO_OTYPER_OT_0 /*!< Select open-drain as output type */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_SPEED Output Speed + * @{ + */ +#define LL_GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< Select I/O low output speed */ +#define LL_GPIO_SPEED_FREQ_MEDIUM GPIO_OSPEEDER_OSPEEDR0_0 /*!< Select I/O medium output speed */ +#define LL_GPIO_SPEED_FREQ_HIGH GPIO_OSPEEDER_OSPEEDR0_1 /*!< Select I/O fast output speed */ +#define LL_GPIO_SPEED_FREQ_VERY_HIGH GPIO_OSPEEDER_OSPEEDR0 /*!< Select I/O high output speed */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_PULL Pull Up Pull Down + * @{ + */ +#define LL_GPIO_PULL_NO (0x00000000U) /*!< Select I/O no pull */ +#define LL_GPIO_PULL_UP GPIO_PUPDR_PUPDR0_0 /*!< Select I/O pull up */ +#define LL_GPIO_PULL_DOWN GPIO_PUPDR_PUPDR0_1 /*!< Select I/O pull down */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_AF Alternate Function + * @{ + */ +#define LL_GPIO_AF_0 (0x0000000U) /*!< Select alternate function 0 */ +#define LL_GPIO_AF_1 (0x0000001U) /*!< Select alternate function 1 */ +#define LL_GPIO_AF_2 (0x0000002U) /*!< Select alternate function 2 */ +#define LL_GPIO_AF_3 (0x0000003U) /*!< Select alternate function 3 */ +#define LL_GPIO_AF_4 (0x0000004U) /*!< Select alternate function 4 */ +#define LL_GPIO_AF_5 (0x0000005U) /*!< Select alternate function 5 */ +#define LL_GPIO_AF_6 (0x0000006U) /*!< Select alternate function 6 */ +#define LL_GPIO_AF_7 (0x0000007U) /*!< Select alternate function 7 */ +#define LL_GPIO_AF_8 (0x0000008U) /*!< Select alternate function 8 */ +#define LL_GPIO_AF_9 (0x0000009U) /*!< Select alternate function 9 */ +#define LL_GPIO_AF_10 (0x000000AU) /*!< Select alternate function 10 */ +#define LL_GPIO_AF_11 (0x000000BU) /*!< Select alternate function 11 */ +#define LL_GPIO_AF_12 (0x000000CU) /*!< Select alternate function 12 */ +#define LL_GPIO_AF_13 (0x000000DU) /*!< Select alternate function 13 */ +#define LL_GPIO_AF_14 (0x000000EU) /*!< Select alternate function 14 */ +#define LL_GPIO_AF_15 (0x000000FU) /*!< Select alternate function 15 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Macros GPIO Exported Macros + * @{ + */ + +/** @defgroup GPIO_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in GPIO register + * @param __INSTANCE__ GPIO Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_GPIO_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in GPIO register + * @param __INSTANCE__ GPIO Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_GPIO_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Functions GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_LL_EF_Port_Configuration Port Configuration + * @{ + */ + +/** + * @brief Configure gpio mode for a dedicated pin on dedicated port. + * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll MODER MODEy LL_GPIO_SetPinMode + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_GPIO_MODE_INPUT + * @arg @ref LL_GPIO_MODE_OUTPUT + * @arg @ref LL_GPIO_MODE_ALTERNATE + * @arg @ref LL_GPIO_MODE_ANALOG + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode) +{ + MODIFY_REG(GPIOx->MODER, (GPIO_MODER_MODER0 << (POSITION_VAL(Pin) * 2U)), (Mode << (POSITION_VAL(Pin) * 2U))); +} + +/** + * @brief Return gpio mode for a dedicated pin on dedicated port. + * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll MODER MODEy LL_GPIO_GetPinMode + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_MODE_INPUT + * @arg @ref LL_GPIO_MODE_OUTPUT + * @arg @ref LL_GPIO_MODE_ALTERNATE + * @arg @ref LL_GPIO_MODE_ANALOG + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->MODER, + (GPIO_MODER_MODER0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U)); +} + +/** + * @brief Configure gpio output type for several pins on dedicated port. + * @note Output type as to be set when gpio pin is in output or + * alternate modes. Possible type are Push-pull or Open-drain. + * @rmtoll OTYPER OTy LL_GPIO_SetPinOutputType + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @param OutputType This parameter can be one of the following values: + * @arg @ref LL_GPIO_OUTPUT_PUSHPULL + * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType) +{ + MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType)); +} + +/** + * @brief Return gpio output type for several pins on dedicated port. + * @note Output type as to be set when gpio pin is in output or + * alternate modes. Possible type are Push-pull or Open-drain. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll OTYPER OTy LL_GPIO_GetPinOutputType + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_OUTPUT_PUSHPULL + * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->OTYPER, Pin) >> POSITION_VAL(Pin)); +} + +/** + * @brief Configure gpio speed for a dedicated pin on dedicated port. + * @note I/O speed can be Low, Medium, Fast or High speed. + * @note Warning: only one pin can be passed as parameter. + * @note Refer to datasheet for frequency specifications and the power + * supply and load conditions for each speed. + * @rmtoll OSPEEDR OSPEEDy LL_GPIO_SetPinSpeed + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Speed This parameter can be one of the following values: + * @arg @ref LL_GPIO_SPEED_FREQ_LOW + * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM + * @arg @ref LL_GPIO_SPEED_FREQ_HIGH + * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Speed) +{ + MODIFY_REG(GPIOx->OSPEEDR, (GPIO_OSPEEDER_OSPEEDR0 << (POSITION_VAL(Pin) * 2U)), + (Speed << (POSITION_VAL(Pin) * 2U))); +} + +/** + * @brief Return gpio speed for a dedicated pin on dedicated port. + * @note I/O speed can be Low, Medium, Fast or High speed. + * @note Warning: only one pin can be passed as parameter. + * @note Refer to datasheet for frequency specifications and the power + * supply and load conditions for each speed. + * @rmtoll OSPEEDR OSPEEDy LL_GPIO_GetPinSpeed + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_SPEED_FREQ_LOW + * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM + * @arg @ref LL_GPIO_SPEED_FREQ_HIGH + * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->OSPEEDR, + (GPIO_OSPEEDER_OSPEEDR0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U)); +} + +/** + * @brief Configure gpio pull-up or pull-down for a dedicated pin on a dedicated port. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll PUPDR PUPDy LL_GPIO_SetPinPull + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Pull This parameter can be one of the following values: + * @arg @ref LL_GPIO_PULL_NO + * @arg @ref LL_GPIO_PULL_UP + * @arg @ref LL_GPIO_PULL_DOWN + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull) +{ + MODIFY_REG(GPIOx->PUPDR, (GPIO_PUPDR_PUPDR0 << (POSITION_VAL(Pin) * 2U)), (Pull << (POSITION_VAL(Pin) * 2U))); +} + +/** + * @brief Return gpio pull-up or pull-down for a dedicated pin on a dedicated port + * @note Warning: only one pin can be passed as parameter. + * @rmtoll PUPDR PUPDy LL_GPIO_GetPinPull + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_PULL_NO + * @arg @ref LL_GPIO_PULL_UP + * @arg @ref LL_GPIO_PULL_DOWN + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->PUPDR, + (GPIO_PUPDR_PUPDR0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U)); +} + +/** + * @brief Configure gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. + * @note Possible values are from AF0 to AF15 depending on target. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll AFRL AFSELy LL_GPIO_SetAFPin_0_7 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @param Alternate This parameter can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) +{ + MODIFY_REG(GPIOx->AFR[0], (GPIO_AFRL_AFSEL0 << (POSITION_VAL(Pin) * 4U)), + (Alternate << (POSITION_VAL(Pin) * 4U))); +} + +/** + * @brief Return gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. + * @rmtoll AFRL AFSELy LL_GPIO_GetAFPin_0_7 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + */ +__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->AFR[0], + (GPIO_AFRL_AFSEL0 << (POSITION_VAL(Pin) * 4U))) >> (POSITION_VAL(Pin) * 4U)); +} + +/** + * @brief Configure gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. + * @note Possible values are from AF0 to AF15 depending on target. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll AFRH AFSELy LL_GPIO_SetAFPin_8_15 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Alternate This parameter can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) +{ + MODIFY_REG(GPIOx->AFR[1], (GPIO_AFRH_AFSEL8 << (POSITION_VAL(Pin >> 8U) * 4U)), + (Alternate << (POSITION_VAL(Pin >> 8U) * 4U))); +} + +/** + * @brief Return gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. + * @note Possible values are from AF0 to AF15 depending on target. + * @rmtoll AFRH AFSELy LL_GPIO_GetAFPin_8_15 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + */ +__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->AFR[1], + (GPIO_AFRH_AFSEL8 << (POSITION_VAL(Pin >> 8U) * 4U))) >> (POSITION_VAL(Pin >> 8U) * 4U)); +} + + +/** + * @brief Lock configuration of several pins for a dedicated port. + * @note When the lock sequence has been applied on a port bit, the + * value of this port bit can no longer be modified until the + * next reset. + * @note Each lock bit freezes a specific configuration register + * (control and alternate function registers). + * @rmtoll LCKR LCKK LL_GPIO_LockPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + __IO uint32_t temp; + WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); + WRITE_REG(GPIOx->LCKR, PinMask); + WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); + temp = READ_REG(GPIOx->LCKR); + (void) temp; +} + +/** + * @brief Return 1 if all pins passed as parameter, of a dedicated port, are locked. else Return 0. + * @rmtoll LCKR LCKy LL_GPIO_IsPinLocked + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsPinLocked(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return (READ_BIT(GPIOx->LCKR, PinMask) == (PinMask)); +} + +/** + * @brief Return 1 if one of the pin of a dedicated port is locked. else return 0. + * @rmtoll LCKR LCKK LL_GPIO_IsAnyPinLocked + * @param GPIOx GPIO Port + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsAnyPinLocked(GPIO_TypeDef *GPIOx) +{ + return (READ_BIT(GPIOx->LCKR, GPIO_LCKR_LCKK) == (GPIO_LCKR_LCKK)); +} + +/** + * @} + */ + +/** @defgroup GPIO_LL_EF_Data_Access Data Access + * @{ + */ + +/** + * @brief Return full input data register value for a dedicated port. + * @rmtoll IDR IDy LL_GPIO_ReadInputPort + * @param GPIOx GPIO Port + * @retval Input data register value of port + */ +__STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(GPIO_TypeDef *GPIOx) +{ + return (uint32_t)(READ_REG(GPIOx->IDR)); +} + +/** + * @brief Return if input data level for several pins of dedicated port is high or low. + * @rmtoll IDR IDy LL_GPIO_IsInputPinSet + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsInputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return (READ_BIT(GPIOx->IDR, PinMask) == (PinMask)); +} + +/** + * @brief Write output data register for the port. + * @rmtoll ODR ODy LL_GPIO_WriteOutputPort + * @param GPIOx GPIO Port + * @param PortValue Level value for each pin of the port + * @retval None + */ +__STATIC_INLINE void LL_GPIO_WriteOutputPort(GPIO_TypeDef *GPIOx, uint32_t PortValue) +{ + WRITE_REG(GPIOx->ODR, PortValue); +} + +/** + * @brief Return full output data register value for a dedicated port. + * @rmtoll ODR ODy LL_GPIO_ReadOutputPort + * @param GPIOx GPIO Port + * @retval Output data register value of port + */ +__STATIC_INLINE uint32_t LL_GPIO_ReadOutputPort(GPIO_TypeDef *GPIOx) +{ + return (uint32_t)(READ_REG(GPIOx->ODR)); +} + +/** + * @brief Return if input data level for several pins of dedicated port is high or low. + * @rmtoll ODR ODy LL_GPIO_IsOutputPinSet + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return (READ_BIT(GPIOx->ODR, PinMask) == (PinMask)); +} + +/** + * @brief Set several pins to high level on dedicated gpio port. + * @rmtoll BSRR BSy LL_GPIO_SetOutputPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + WRITE_REG(GPIOx->BSRR, PinMask); +} + +/** + * @brief Set several pins to low level on dedicated gpio port. + * @rmtoll BSRR BRy LL_GPIO_ResetOutputPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + WRITE_REG(GPIOx->BSRR, (PinMask << 16)); +} + +/** + * @brief Toggle data value for several pin of dedicated port. + * @rmtoll ODR ODy LL_GPIO_TogglePin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + uint32_t odr = READ_REG(GPIOx->ODR); + WRITE_REG(GPIOx->BSRR, ((odr & PinMask) << 16u) | (~odr & PinMask)); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx); +ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct); +void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI) || defined (GPIOJ) || defined (GPIOK) */ +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_LL_GPIO_H */ + diff --git a/Drivers/stm32f4xx_ll_pwr.h b/libs/hal/stm32f4xx_ll_pwr.h similarity index 96% rename from Drivers/stm32f4xx_ll_pwr.h rename to libs/hal/stm32f4xx_ll_pwr.h index f40e079..ea23dc5 100644 --- a/Drivers/stm32f4xx_ll_pwr.h +++ b/libs/hal/stm32f4xx_ll_pwr.h @@ -1,985 +1,985 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_pwr.h - * @author MCD Application Team - * @brief Header file of PWR LL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_PWR_H -#define __STM32F4xx_LL_PWR_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined(PWR) - -/** @defgroup PWR_LL PWR - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants - * @{ - */ - -/** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines - * @brief Flags defines which can be used with LL_PWR_WriteReg function - * @{ - */ -#define LL_PWR_CR_CSBF PWR_CR_CSBF /*!< Clear standby flag */ -#define LL_PWR_CR_CWUF PWR_CR_CWUF /*!< Clear wakeup flag */ -/** - * @} - */ - -/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines - * @brief Flags defines which can be used with LL_PWR_ReadReg function - * @{ - */ -#define LL_PWR_CSR_WUF PWR_CSR_WUF /*!< Wakeup flag */ -#define LL_PWR_CSR_SBF PWR_CSR_SBF /*!< Standby flag */ -#define LL_PWR_CSR_PVDO PWR_CSR_PVDO /*!< Power voltage detector output flag */ -#define LL_PWR_CSR_VOS PWR_CSR_VOSRDY /*!< Voltage scaling select flag */ -#if defined(PWR_CSR_EWUP) -#define LL_PWR_CSR_EWUP1 PWR_CSR_EWUP /*!< Enable WKUP pin */ -#elif defined(PWR_CSR_EWUP1) -#define LL_PWR_CSR_EWUP1 PWR_CSR_EWUP1 /*!< Enable WKUP pin 1 */ -#endif /* PWR_CSR_EWUP */ -#if defined(PWR_CSR_EWUP2) -#define LL_PWR_CSR_EWUP2 PWR_CSR_EWUP2 /*!< Enable WKUP pin 2 */ -#endif /* PWR_CSR_EWUP2 */ -#if defined(PWR_CSR_EWUP3) -#define LL_PWR_CSR_EWUP3 PWR_CSR_EWUP3 /*!< Enable WKUP pin 3 */ -#endif /* PWR_CSR_EWUP3 */ -/** - * @} - */ - -/** @defgroup PWR_LL_EC_REGU_VOLTAGE Regulator Voltage - * @{ - */ -#if defined(PWR_CR_VOS_0) -#define LL_PWR_REGU_VOLTAGE_SCALE3 (PWR_CR_VOS_0) -#define LL_PWR_REGU_VOLTAGE_SCALE2 (PWR_CR_VOS_1) -#define LL_PWR_REGU_VOLTAGE_SCALE1 (PWR_CR_VOS_0 | PWR_CR_VOS_1) /* The SCALE1 is not available for STM32F401xx devices */ -#else -#define LL_PWR_REGU_VOLTAGE_SCALE1 (PWR_CR_VOS) -#define LL_PWR_REGU_VOLTAGE_SCALE2 0x00000000U -#endif /* PWR_CR_VOS_0 */ -/** - * @} - */ - -/** @defgroup PWR_LL_EC_MODE_PWR Mode Power - * @{ - */ -#define LL_PWR_MODE_STOP_MAINREGU 0x00000000U /*!< Enter Stop mode when the CPU enters deepsleep */ -#define LL_PWR_MODE_STOP_LPREGU (PWR_CR_LPDS) /*!< Enter Stop mode (with low power Regulator ON) when the CPU enters deepsleep */ -#if defined(PWR_CR_MRUDS) && defined(PWR_CR_LPUDS) && defined(PWR_CR_FPDS) -#define LL_PWR_MODE_STOP_MAINREGU_UNDERDRIVE (PWR_CR_MRUDS | PWR_CR_FPDS) /*!< Enter Stop mode (with main Regulator in under-drive mode) when the CPU enters deepsleep */ -#define LL_PWR_MODE_STOP_LPREGU_UNDERDRIVE (PWR_CR_LPDS | PWR_CR_LPUDS | PWR_CR_FPDS) /*!< Enter Stop mode (with low power Regulator in under-drive mode) when the CPU enters deepsleep */ -#endif /* PWR_CR_MRUDS && PWR_CR_LPUDS && PWR_CR_FPDS */ -#if defined(PWR_CR_MRLVDS) && defined(PWR_CR_LPLVDS) && defined(PWR_CR_FPDS) -#define LL_PWR_MODE_STOP_MAINREGU_DEEPSLEEP (PWR_CR_MRLVDS | PWR_CR_FPDS) /*!< Enter Stop mode (with main Regulator in Deep Sleep mode) when the CPU enters deepsleep */ -#define LL_PWR_MODE_STOP_LPREGU_DEEPSLEEP (PWR_CR_LPDS | PWR_CR_LPLVDS | PWR_CR_FPDS) /*!< Enter Stop mode (with low power Regulator in Deep Sleep mode) when the CPU enters deepsleep */ -#endif /* PWR_CR_MRLVDS && PWR_CR_LPLVDS && PWR_CR_FPDS */ -#define LL_PWR_MODE_STANDBY (PWR_CR_PDDS) /*!< Enter Standby mode when the CPU enters deepsleep */ -/** - * @} - */ - -/** @defgroup PWR_LL_EC_REGU_MODE_DS_MODE Regulator Mode In Deep Sleep Mode - * @{ - */ -#define LL_PWR_REGU_DSMODE_MAIN 0x00000000U /*!< Voltage Regulator in main mode during deepsleep mode */ -#define LL_PWR_REGU_DSMODE_LOW_POWER (PWR_CR_LPDS) /*!< Voltage Regulator in low-power mode during deepsleep mode */ -/** - * @} - */ - -/** @defgroup PWR_LL_EC_PVDLEVEL Power Voltage Detector Level - * @{ - */ -#define LL_PWR_PVDLEVEL_0 (PWR_CR_PLS_LEV0) /*!< Voltage threshold detected by PVD 2.2 V */ -#define LL_PWR_PVDLEVEL_1 (PWR_CR_PLS_LEV1) /*!< Voltage threshold detected by PVD 2.3 V */ -#define LL_PWR_PVDLEVEL_2 (PWR_CR_PLS_LEV2) /*!< Voltage threshold detected by PVD 2.4 V */ -#define LL_PWR_PVDLEVEL_3 (PWR_CR_PLS_LEV3) /*!< Voltage threshold detected by PVD 2.5 V */ -#define LL_PWR_PVDLEVEL_4 (PWR_CR_PLS_LEV4) /*!< Voltage threshold detected by PVD 2.6 V */ -#define LL_PWR_PVDLEVEL_5 (PWR_CR_PLS_LEV5) /*!< Voltage threshold detected by PVD 2.7 V */ -#define LL_PWR_PVDLEVEL_6 (PWR_CR_PLS_LEV6) /*!< Voltage threshold detected by PVD 2.8 V */ -#define LL_PWR_PVDLEVEL_7 (PWR_CR_PLS_LEV7) /*!< Voltage threshold detected by PVD 2.9 V */ -/** - * @} - */ -/** @defgroup PWR_LL_EC_WAKEUP_PIN Wakeup Pins - * @{ - */ -#if defined(PWR_CSR_EWUP) -#define LL_PWR_WAKEUP_PIN1 (PWR_CSR_EWUP) /*!< WKUP pin : PA0 */ -#endif /* PWR_CSR_EWUP */ -#if defined(PWR_CSR_EWUP1) -#define LL_PWR_WAKEUP_PIN1 (PWR_CSR_EWUP1) /*!< WKUP pin 1 : PA0 */ -#endif /* PWR_CSR_EWUP1 */ -#if defined(PWR_CSR_EWUP2) -#define LL_PWR_WAKEUP_PIN2 (PWR_CSR_EWUP2) /*!< WKUP pin 2 : PC0 or PC13 according to device */ -#endif /* PWR_CSR_EWUP2 */ -#if defined(PWR_CSR_EWUP3) -#define LL_PWR_WAKEUP_PIN3 (PWR_CSR_EWUP3) /*!< WKUP pin 3 : PC1 */ -#endif /* PWR_CSR_EWUP3 */ -/** - * @} - */ - -/** - * @} - */ - - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros - * @{ - */ - -/** @defgroup PWR_LL_EM_WRITE_READ Common write and read registers Macros - * @{ - */ - -/** - * @brief Write a value in PWR register - * @param __REG__ Register to be written - * @param __VALUE__ Value to be written in the register - * @retval None - */ -#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__)) - -/** - * @brief Read a value in PWR register - * @param __REG__ Register to be read - * @retval Register value - */ -#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__) -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions - * @{ - */ - -/** @defgroup PWR_LL_EF_Configuration Configuration - * @{ - */ -#if defined(PWR_CR_FISSR) -/** - * @brief Enable FLASH interface STOP while system Run is ON - * @rmtoll CR FISSR LL_PWR_EnableFLASHInterfaceSTOP - * @note This mode is enabled only with STOP low power mode. - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableFLASHInterfaceSTOP(void) -{ - SET_BIT(PWR->CR, PWR_CR_FISSR); -} - -/** - * @brief Disable FLASH Interface STOP while system Run is ON - * @rmtoll CR FISSR LL_PWR_DisableFLASHInterfaceSTOP - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableFLASHInterfaceSTOP(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_FISSR); -} - -/** - * @brief Check if FLASH Interface STOP while system Run feature is enabled - * @rmtoll CR FISSR LL_PWR_IsEnabledFLASHInterfaceSTOP - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledFLASHInterfaceSTOP(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_FISSR) == (PWR_CR_FISSR)); -} -#endif /* PWR_CR_FISSR */ - -#if defined(PWR_CR_FMSSR) -/** - * @brief Enable FLASH Memory STOP while system Run is ON - * @rmtoll CR FMSSR LL_PWR_EnableFLASHMemorySTOP - * @note This mode is enabled only with STOP low power mode. - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableFLASHMemorySTOP(void) -{ - SET_BIT(PWR->CR, PWR_CR_FMSSR); -} - -/** - * @brief Disable FLASH Memory STOP while system Run is ON - * @rmtoll CR FMSSR LL_PWR_DisableFLASHMemorySTOP - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableFLASHMemorySTOP(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_FMSSR); -} - -/** - * @brief Check if FLASH Memory STOP while system Run feature is enabled - * @rmtoll CR FMSSR LL_PWR_IsEnabledFLASHMemorySTOP - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledFLASHMemorySTOP(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_FMSSR) == (PWR_CR_FMSSR)); -} -#endif /* PWR_CR_FMSSR */ -#if defined(PWR_CR_UDEN) -/** - * @brief Enable Under Drive Mode - * @rmtoll CR UDEN LL_PWR_EnableUnderDriveMode - * @note This mode is enabled only with STOP low power mode. - * In this mode, the 1.2V domain is preserved in reduced leakage mode. This - * mode is only available when the main Regulator or the low power Regulator - * is in low voltage mode. - * @note If the Under-drive mode was enabled, it is automatically disabled after - * exiting Stop mode. - * When the voltage Regulator operates in Under-drive mode, an additional - * startup delay is induced when waking up from Stop mode. - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableUnderDriveMode(void) -{ - SET_BIT(PWR->CR, PWR_CR_UDEN); -} - -/** - * @brief Disable Under Drive Mode - * @rmtoll CR UDEN LL_PWR_DisableUnderDriveMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableUnderDriveMode(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_UDEN); -} - -/** - * @brief Check if Under Drive Mode is enabled - * @rmtoll CR UDEN LL_PWR_IsEnabledUnderDriveMode - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledUnderDriveMode(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_UDEN) == (PWR_CR_UDEN)); -} -#endif /* PWR_CR_UDEN */ - -#if defined(PWR_CR_ODSWEN) -/** - * @brief Enable Over drive switching - * @rmtoll CR ODSWEN LL_PWR_EnableOverDriveSwitching - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableOverDriveSwitching(void) -{ - SET_BIT(PWR->CR, PWR_CR_ODSWEN); -} - -/** - * @brief Disable Over drive switching - * @rmtoll CR ODSWEN LL_PWR_DisableOverDriveSwitching - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableOverDriveSwitching(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_ODSWEN); -} - -/** - * @brief Check if Over drive switching is enabled - * @rmtoll CR ODSWEN LL_PWR_IsEnabledOverDriveSwitching - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledOverDriveSwitching(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_ODSWEN) == (PWR_CR_ODSWEN)); -} -#endif /* PWR_CR_ODSWEN */ -#if defined(PWR_CR_ODEN) -/** - * @brief Enable Over drive Mode - * @rmtoll CR ODEN LL_PWR_EnableOverDriveMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableOverDriveMode(void) -{ - SET_BIT(PWR->CR, PWR_CR_ODEN); -} - -/** - * @brief Disable Over drive Mode - * @rmtoll CR ODEN LL_PWR_DisableOverDriveMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableOverDriveMode(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_ODEN); -} - -/** - * @brief Check if Over drive switching is enabled - * @rmtoll CR ODEN LL_PWR_IsEnabledOverDriveMode - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledOverDriveMode(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_ODEN) == (PWR_CR_ODEN)); -} -#endif /* PWR_CR_ODEN */ -#if defined(PWR_CR_MRUDS) -/** - * @brief Enable Main Regulator in deepsleep under-drive Mode - * @rmtoll CR MRUDS LL_PWR_EnableMainRegulatorDeepSleepUDMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableMainRegulatorDeepSleepUDMode(void) -{ - SET_BIT(PWR->CR, PWR_CR_MRUDS); -} - -/** - * @brief Disable Main Regulator in deepsleep under-drive Mode - * @rmtoll CR MRUDS LL_PWR_DisableMainRegulatorDeepSleepUDMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableMainRegulatorDeepSleepUDMode(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_MRUDS); -} - -/** - * @brief Check if Main Regulator in deepsleep under-drive Mode is enabled - * @rmtoll CR MRUDS LL_PWR_IsEnabledMainRegulatorDeepSleepUDMode - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledMainRegulatorDeepSleepUDMode(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_MRUDS) == (PWR_CR_MRUDS)); -} -#endif /* PWR_CR_MRUDS */ - -#if defined(PWR_CR_LPUDS) -/** - * @brief Enable Low Power Regulator in deepsleep under-drive Mode - * @rmtoll CR LPUDS LL_PWR_EnableLowPowerRegulatorDeepSleepUDMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableLowPowerRegulatorDeepSleepUDMode(void) -{ - SET_BIT(PWR->CR, PWR_CR_LPUDS); -} - -/** - * @brief Disable Low Power Regulator in deepsleep under-drive Mode - * @rmtoll CR LPUDS LL_PWR_DisableLowPowerRegulatorDeepSleepUDMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableLowPowerRegulatorDeepSleepUDMode(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_LPUDS); -} - -/** - * @brief Check if Low Power Regulator in deepsleep under-drive Mode is enabled - * @rmtoll CR LPUDS LL_PWR_IsEnabledLowPowerRegulatorDeepSleepUDMode - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledLowPowerRegulatorDeepSleepUDMode(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_LPUDS) == (PWR_CR_LPUDS)); -} -#endif /* PWR_CR_LPUDS */ - -#if defined(PWR_CR_MRLVDS) -/** - * @brief Enable Main Regulator low voltage Mode - * @rmtoll CR MRLVDS LL_PWR_EnableMainRegulatorLowVoltageMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableMainRegulatorLowVoltageMode(void) -{ - SET_BIT(PWR->CR, PWR_CR_MRLVDS); -} - -/** - * @brief Disable Main Regulator low voltage Mode - * @rmtoll CR MRLVDS LL_PWR_DisableMainRegulatorLowVoltageMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableMainRegulatorLowVoltageMode(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_MRLVDS); -} - -/** - * @brief Check if Main Regulator low voltage Mode is enabled - * @rmtoll CR MRLVDS LL_PWR_IsEnabledMainRegulatorLowVoltageMode - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledMainRegulatorLowVoltageMode(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_MRLVDS) == (PWR_CR_MRLVDS)); -} -#endif /* PWR_CR_MRLVDS */ - -#if defined(PWR_CR_LPLVDS) -/** - * @brief Enable Low Power Regulator low voltage Mode - * @rmtoll CR LPLVDS LL_PWR_EnableLowPowerRegulatorLowVoltageMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableLowPowerRegulatorLowVoltageMode(void) -{ - SET_BIT(PWR->CR, PWR_CR_LPLVDS); -} - -/** - * @brief Disable Low Power Regulator low voltage Mode - * @rmtoll CR LPLVDS LL_PWR_DisableLowPowerRegulatorLowVoltageMode - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableLowPowerRegulatorLowVoltageMode(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_LPLVDS); -} - -/** - * @brief Check if Low Power Regulator low voltage Mode is enabled - * @rmtoll CR LPLVDS LL_PWR_IsEnabledLowPowerRegulatorLowVoltageMode - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledLowPowerRegulatorLowVoltageMode(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_LPLVDS) == (PWR_CR_LPLVDS)); -} -#endif /* PWR_CR_LPLVDS */ -/** - * @brief Set the main internal Regulator output voltage - * @rmtoll CR VOS LL_PWR_SetRegulVoltageScaling - * @param VoltageScaling This parameter can be one of the following values: - * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1 (*) - * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2 - * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE3 - * (*) LL_PWR_REGU_VOLTAGE_SCALE1 is not available for STM32F401xx devices - * @retval None - */ -__STATIC_INLINE void LL_PWR_SetRegulVoltageScaling(uint32_t VoltageScaling) -{ - MODIFY_REG(PWR->CR, PWR_CR_VOS, VoltageScaling); -} - -/** - * @brief Get the main internal Regulator output voltage - * @rmtoll CR VOS LL_PWR_GetRegulVoltageScaling - * @retval Returned value can be one of the following values: - * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1 (*) - * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2 - * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE3 - * (*) LL_PWR_REGU_VOLTAGE_SCALE1 is not available for STM32F401xx devices - */ -__STATIC_INLINE uint32_t LL_PWR_GetRegulVoltageScaling(void) -{ - return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_VOS)); -} -/** - * @brief Enable the Flash Power Down in Stop Mode - * @rmtoll CR FPDS LL_PWR_EnableFlashPowerDown - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableFlashPowerDown(void) -{ - SET_BIT(PWR->CR, PWR_CR_FPDS); -} - -/** - * @brief Disable the Flash Power Down in Stop Mode - * @rmtoll CR FPDS LL_PWR_DisableFlashPowerDown - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableFlashPowerDown(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_FPDS); -} - -/** - * @brief Check if the Flash Power Down in Stop Mode is enabled - * @rmtoll CR FPDS LL_PWR_IsEnabledFlashPowerDown - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledFlashPowerDown(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_FPDS) == (PWR_CR_FPDS)); -} - -/** - * @brief Enable access to the backup domain - * @rmtoll CR DBP LL_PWR_EnableBkUpAccess - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableBkUpAccess(void) -{ - SET_BIT(PWR->CR, PWR_CR_DBP); -} - -/** - * @brief Disable access to the backup domain - * @rmtoll CR DBP LL_PWR_DisableBkUpAccess - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableBkUpAccess(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_DBP); -} - -/** - * @brief Check if the backup domain is enabled - * @rmtoll CR DBP LL_PWR_IsEnabledBkUpAccess - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_DBP) == (PWR_CR_DBP)); -} -/** - * @brief Enable the backup Regulator - * @rmtoll CSR BRE LL_PWR_EnableBkUpRegulator - * @note The BRE bit of the PWR_CSR register is protected against parasitic write access. - * The LL_PWR_EnableBkUpAccess() must be called before using this API. - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableBkUpRegulator(void) -{ - SET_BIT(PWR->CSR, PWR_CSR_BRE); -} - -/** - * @brief Disable the backup Regulator - * @rmtoll CSR BRE LL_PWR_DisableBkUpRegulator - * @note The BRE bit of the PWR_CSR register is protected against parasitic write access. - * The LL_PWR_EnableBkUpAccess() must be called before using this API. - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableBkUpRegulator(void) -{ - CLEAR_BIT(PWR->CSR, PWR_CSR_BRE); -} - -/** - * @brief Check if the backup Regulator is enabled - * @rmtoll CSR BRE LL_PWR_IsEnabledBkUpRegulator - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpRegulator(void) -{ - return (READ_BIT(PWR->CSR, PWR_CSR_BRE) == (PWR_CSR_BRE)); -} - -/** - * @brief Set voltage Regulator mode during deep sleep mode - * @rmtoll CR LPDS LL_PWR_SetRegulModeDS - * @param RegulMode This parameter can be one of the following values: - * @arg @ref LL_PWR_REGU_DSMODE_MAIN - * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER - * @retval None - */ -__STATIC_INLINE void LL_PWR_SetRegulModeDS(uint32_t RegulMode) -{ - MODIFY_REG(PWR->CR, PWR_CR_LPDS, RegulMode); -} - -/** - * @brief Get voltage Regulator mode during deep sleep mode - * @rmtoll CR LPDS LL_PWR_GetRegulModeDS - * @retval Returned value can be one of the following values: - * @arg @ref LL_PWR_REGU_DSMODE_MAIN - * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER - */ -__STATIC_INLINE uint32_t LL_PWR_GetRegulModeDS(void) -{ - return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_LPDS)); -} - -/** - * @brief Set Power Down mode when CPU enters deepsleep - * @rmtoll CR PDDS LL_PWR_SetPowerMode\n - * @rmtoll CR MRUDS LL_PWR_SetPowerMode\n - * @rmtoll CR LPUDS LL_PWR_SetPowerMode\n - * @rmtoll CR FPDS LL_PWR_SetPowerMode\n - * @rmtoll CR MRLVDS LL_PWR_SetPowerMode\n - * @rmtoll CR LPlVDS LL_PWR_SetPowerMode\n - * @rmtoll CR FPDS LL_PWR_SetPowerMode\n - * @rmtoll CR LPDS LL_PWR_SetPowerMode - * @param PDMode This parameter can be one of the following values: - * @arg @ref LL_PWR_MODE_STOP_MAINREGU - * @arg @ref LL_PWR_MODE_STOP_LPREGU - * @arg @ref LL_PWR_MODE_STOP_MAINREGU_UNDERDRIVE (*) - * @arg @ref LL_PWR_MODE_STOP_LPREGU_UNDERDRIVE (*) - * @arg @ref LL_PWR_MODE_STOP_MAINREGU_DEEPSLEEP (*) - * @arg @ref LL_PWR_MODE_STOP_LPREGU_DEEPSLEEP (*) - * - * (*) not available on all devices - * @arg @ref LL_PWR_MODE_STANDBY - * @retval None - */ -__STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t PDMode) -{ -#if defined(PWR_CR_MRUDS) && defined(PWR_CR_LPUDS) && defined(PWR_CR_FPDS) - MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_FPDS | PWR_CR_LPUDS | PWR_CR_MRUDS), PDMode); -#elif defined(PWR_CR_MRLVDS) && defined(PWR_CR_LPLVDS) && defined(PWR_CR_FPDS) - MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_FPDS | PWR_CR_LPLVDS | PWR_CR_MRLVDS), PDMode); -#else - MODIFY_REG(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS), PDMode); -#endif /* PWR_CR_MRUDS && PWR_CR_LPUDS && PWR_CR_FPDS */ -} - -/** - * @brief Get Power Down mode when CPU enters deepsleep - * @rmtoll CR PDDS LL_PWR_GetPowerMode\n - * @rmtoll CR MRUDS LL_PWR_GetPowerMode\n - * @rmtoll CR LPUDS LL_PWR_GetPowerMode\n - * @rmtoll CR FPDS LL_PWR_GetPowerMode\n - * @rmtoll CR MRLVDS LL_PWR_GetPowerMode\n - * @rmtoll CR LPLVDS LL_PWR_GetPowerMode\n - * @rmtoll CR FPDS LL_PWR_GetPowerMode\n - * @rmtoll CR LPDS LL_PWR_GetPowerMode - * @retval Returned value can be one of the following values: - * @arg @ref LL_PWR_MODE_STOP_MAINREGU - * @arg @ref LL_PWR_MODE_STOP_LPREGU - * @arg @ref LL_PWR_MODE_STOP_MAINREGU_UNDERDRIVE (*) - * @arg @ref LL_PWR_MODE_STOP_LPREGU_UNDERDRIVE (*) - * @arg @ref LL_PWR_MODE_STOP_MAINREGU_DEEPSLEEP (*) - * @arg @ref LL_PWR_MODE_STOP_LPREGU_DEEPSLEEP (*) - * - * (*) not available on all devices - * @arg @ref LL_PWR_MODE_STANDBY - */ -__STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void) -{ -#if defined(PWR_CR_MRUDS) && defined(PWR_CR_LPUDS) && defined(PWR_CR_FPDS) - return (uint32_t)(READ_BIT(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_FPDS | PWR_CR_LPUDS | PWR_CR_MRUDS))); -#elif defined(PWR_CR_MRLVDS) && defined(PWR_CR_LPLVDS) && defined(PWR_CR_FPDS) - return (uint32_t)(READ_BIT(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_FPDS | PWR_CR_LPLVDS | PWR_CR_MRLVDS))); -#else - return (uint32_t)(READ_BIT(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS))); -#endif /* PWR_CR_MRUDS && PWR_CR_LPUDS && PWR_CR_FPDS */ -} - -/** - * @brief Configure the voltage threshold detected by the Power Voltage Detector - * @rmtoll CR PLS LL_PWR_SetPVDLevel - * @param PVDLevel This parameter can be one of the following values: - * @arg @ref LL_PWR_PVDLEVEL_0 - * @arg @ref LL_PWR_PVDLEVEL_1 - * @arg @ref LL_PWR_PVDLEVEL_2 - * @arg @ref LL_PWR_PVDLEVEL_3 - * @arg @ref LL_PWR_PVDLEVEL_4 - * @arg @ref LL_PWR_PVDLEVEL_5 - * @arg @ref LL_PWR_PVDLEVEL_6 - * @arg @ref LL_PWR_PVDLEVEL_7 - * @retval None - */ -__STATIC_INLINE void LL_PWR_SetPVDLevel(uint32_t PVDLevel) -{ - MODIFY_REG(PWR->CR, PWR_CR_PLS, PVDLevel); -} - -/** - * @brief Get the voltage threshold detection - * @rmtoll CR PLS LL_PWR_GetPVDLevel - * @retval Returned value can be one of the following values: - * @arg @ref LL_PWR_PVDLEVEL_0 - * @arg @ref LL_PWR_PVDLEVEL_1 - * @arg @ref LL_PWR_PVDLEVEL_2 - * @arg @ref LL_PWR_PVDLEVEL_3 - * @arg @ref LL_PWR_PVDLEVEL_4 - * @arg @ref LL_PWR_PVDLEVEL_5 - * @arg @ref LL_PWR_PVDLEVEL_6 - * @arg @ref LL_PWR_PVDLEVEL_7 - */ -__STATIC_INLINE uint32_t LL_PWR_GetPVDLevel(void) -{ - return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_PLS)); -} - -/** - * @brief Enable Power Voltage Detector - * @rmtoll CR PVDE LL_PWR_EnablePVD - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnablePVD(void) -{ - SET_BIT(PWR->CR, PWR_CR_PVDE); -} - -/** - * @brief Disable Power Voltage Detector - * @rmtoll CR PVDE LL_PWR_DisablePVD - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisablePVD(void) -{ - CLEAR_BIT(PWR->CR, PWR_CR_PVDE); -} - -/** - * @brief Check if Power Voltage Detector is enabled - * @rmtoll CR PVDE LL_PWR_IsEnabledPVD - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void) -{ - return (READ_BIT(PWR->CR, PWR_CR_PVDE) == (PWR_CR_PVDE)); -} - -/** - * @brief Enable the WakeUp PINx functionality - * @rmtoll CSR EWUP LL_PWR_EnableWakeUpPin\n - * @rmtoll CSR EWUP1 LL_PWR_EnableWakeUpPin\n - * @rmtoll CSR EWUP2 LL_PWR_EnableWakeUpPin\n - * @rmtoll CSR EWUP3 LL_PWR_EnableWakeUpPin - * @param WakeUpPin This parameter can be one of the following values: - * @arg @ref LL_PWR_WAKEUP_PIN1 - * @arg @ref LL_PWR_WAKEUP_PIN2 (*) - * @arg @ref LL_PWR_WAKEUP_PIN3 (*) - * - * (*) not available on all devices - * @retval None - */ -__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin) -{ - SET_BIT(PWR->CSR, WakeUpPin); -} - -/** - * @brief Disable the WakeUp PINx functionality - * @rmtoll CSR EWUP LL_PWR_DisableWakeUpPin\n - * @rmtoll CSR EWUP1 LL_PWR_DisableWakeUpPin\n - * @rmtoll CSR EWUP2 LL_PWR_DisableWakeUpPin\n - * @rmtoll CSR EWUP3 LL_PWR_DisableWakeUpPin - * @param WakeUpPin This parameter can be one of the following values: - * @arg @ref LL_PWR_WAKEUP_PIN1 - * @arg @ref LL_PWR_WAKEUP_PIN2 (*) - * @arg @ref LL_PWR_WAKEUP_PIN3 (*) - * - * (*) not available on all devices - * @retval None - */ -__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin) -{ - CLEAR_BIT(PWR->CSR, WakeUpPin); -} - -/** - * @brief Check if the WakeUp PINx functionality is enabled - * @rmtoll CSR EWUP LL_PWR_IsEnabledWakeUpPin\n - * @rmtoll CSR EWUP1 LL_PWR_IsEnabledWakeUpPin\n - * @rmtoll CSR EWUP2 LL_PWR_IsEnabledWakeUpPin\n - * @rmtoll CSR EWUP3 LL_PWR_IsEnabledWakeUpPin - * @param WakeUpPin This parameter can be one of the following values: - * @arg @ref LL_PWR_WAKEUP_PIN1 - * @arg @ref LL_PWR_WAKEUP_PIN2 (*) - * @arg @ref LL_PWR_WAKEUP_PIN3 (*) - * - * (*) not available on all devices - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin) -{ - return (READ_BIT(PWR->CSR, WakeUpPin) == (WakeUpPin)); -} - - -/** - * @} - */ - -/** @defgroup PWR_LL_EF_FLAG_Management FLAG_Management - * @{ - */ - -/** - * @brief Get Wake-up Flag - * @rmtoll CSR WUF LL_PWR_IsActiveFlag_WU - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU(void) -{ - return (READ_BIT(PWR->CSR, PWR_CSR_WUF) == (PWR_CSR_WUF)); -} - -/** - * @brief Get Standby Flag - * @rmtoll CSR SBF LL_PWR_IsActiveFlag_SB - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SB(void) -{ - return (READ_BIT(PWR->CSR, PWR_CSR_SBF) == (PWR_CSR_SBF)); -} - -/** - * @brief Get Backup Regulator ready Flag - * @rmtoll CSR BRR LL_PWR_IsActiveFlag_BRR - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_BRR(void) -{ - return (READ_BIT(PWR->CSR, PWR_CSR_BRR) == (PWR_CSR_BRR)); -} -/** - * @brief Indicate whether VDD voltage is below the selected PVD threshold - * @rmtoll CSR PVDO LL_PWR_IsActiveFlag_PVDO - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void) -{ - return (READ_BIT(PWR->CSR, PWR_CSR_PVDO) == (PWR_CSR_PVDO)); -} - -/** - * @brief Indicate whether the Regulator is ready in the selected voltage range or if its output voltage is still changing to the required voltage level - * @rmtoll CSR VOS LL_PWR_IsActiveFlag_VOS - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VOS(void) -{ - return (READ_BIT(PWR->CSR, LL_PWR_CSR_VOS) == (LL_PWR_CSR_VOS)); -} -#if defined(PWR_CR_ODEN) -/** - * @brief Indicate whether the Over-Drive mode is ready or not - * @rmtoll CSR ODRDY LL_PWR_IsActiveFlag_OD - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_OD(void) -{ - return (READ_BIT(PWR->CSR, PWR_CSR_ODRDY) == (PWR_CSR_ODRDY)); -} -#endif /* PWR_CR_ODEN */ - -#if defined(PWR_CR_ODSWEN) -/** - * @brief Indicate whether the Over-Drive mode switching is ready or not - * @rmtoll CSR ODSWRDY LL_PWR_IsActiveFlag_ODSW - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_ODSW(void) -{ - return (READ_BIT(PWR->CSR, PWR_CSR_ODSWRDY) == (PWR_CSR_ODSWRDY)); -} -#endif /* PWR_CR_ODSWEN */ - -#if defined(PWR_CR_UDEN) -/** - * @brief Indicate whether the Under-Drive mode is ready or not - * @rmtoll CSR UDRDY LL_PWR_IsActiveFlag_UD - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_UD(void) -{ - return (READ_BIT(PWR->CSR, PWR_CSR_UDRDY) == (PWR_CSR_UDRDY)); -} -#endif /* PWR_CR_UDEN */ -/** - * @brief Clear Standby Flag - * @rmtoll CR CSBF LL_PWR_ClearFlag_SB - * @retval None - */ -__STATIC_INLINE void LL_PWR_ClearFlag_SB(void) -{ - SET_BIT(PWR->CR, PWR_CR_CSBF); -} - -/** - * @brief Clear Wake-up Flags - * @rmtoll CR CWUF LL_PWR_ClearFlag_WU - * @retval None - */ -__STATIC_INLINE void LL_PWR_ClearFlag_WU(void) -{ - SET_BIT(PWR->CR, PWR_CR_CWUF); -} -#if defined(PWR_CSR_UDRDY) -/** - * @brief Clear Under-Drive ready Flag - * @rmtoll CSR UDRDY LL_PWR_ClearFlag_UD - * @retval None - */ -__STATIC_INLINE void LL_PWR_ClearFlag_UD(void) -{ - WRITE_REG(PWR->CSR, PWR_CSR_UDRDY); -} -#endif /* PWR_CSR_UDRDY */ - -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup PWR_LL_EF_Init De-initialization function - * @{ - */ -ErrorStatus LL_PWR_DeInit(void); -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined(PWR) */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_PWR_H */ +/** + ****************************************************************************** + * @file stm32f4xx_ll_pwr.h + * @author MCD Application Team + * @brief Header file of PWR LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_LL_PWR_H +#define __STM32F4xx_LL_PWR_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_LL_Driver + * @{ + */ + +#if defined(PWR) + +/** @defgroup PWR_LL PWR + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants + * @{ + */ + +/** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_PWR_WriteReg function + * @{ + */ +#define LL_PWR_CR_CSBF PWR_CR_CSBF /*!< Clear standby flag */ +#define LL_PWR_CR_CWUF PWR_CR_CWUF /*!< Clear wakeup flag */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_PWR_ReadReg function + * @{ + */ +#define LL_PWR_CSR_WUF PWR_CSR_WUF /*!< Wakeup flag */ +#define LL_PWR_CSR_SBF PWR_CSR_SBF /*!< Standby flag */ +#define LL_PWR_CSR_PVDO PWR_CSR_PVDO /*!< Power voltage detector output flag */ +#define LL_PWR_CSR_VOS PWR_CSR_VOSRDY /*!< Voltage scaling select flag */ +#if defined(PWR_CSR_EWUP) +#define LL_PWR_CSR_EWUP1 PWR_CSR_EWUP /*!< Enable WKUP pin */ +#elif defined(PWR_CSR_EWUP1) +#define LL_PWR_CSR_EWUP1 PWR_CSR_EWUP1 /*!< Enable WKUP pin 1 */ +#endif /* PWR_CSR_EWUP */ +#if defined(PWR_CSR_EWUP2) +#define LL_PWR_CSR_EWUP2 PWR_CSR_EWUP2 /*!< Enable WKUP pin 2 */ +#endif /* PWR_CSR_EWUP2 */ +#if defined(PWR_CSR_EWUP3) +#define LL_PWR_CSR_EWUP3 PWR_CSR_EWUP3 /*!< Enable WKUP pin 3 */ +#endif /* PWR_CSR_EWUP3 */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_REGU_VOLTAGE Regulator Voltage + * @{ + */ +#if defined(PWR_CR_VOS_0) +#define LL_PWR_REGU_VOLTAGE_SCALE3 (PWR_CR_VOS_0) +#define LL_PWR_REGU_VOLTAGE_SCALE2 (PWR_CR_VOS_1) +#define LL_PWR_REGU_VOLTAGE_SCALE1 (PWR_CR_VOS_0 | PWR_CR_VOS_1) /* The SCALE1 is not available for STM32F401xx devices */ +#else +#define LL_PWR_REGU_VOLTAGE_SCALE1 (PWR_CR_VOS) +#define LL_PWR_REGU_VOLTAGE_SCALE2 0x00000000U +#endif /* PWR_CR_VOS_0 */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_MODE_PWR Mode Power + * @{ + */ +#define LL_PWR_MODE_STOP_MAINREGU 0x00000000U /*!< Enter Stop mode when the CPU enters deepsleep */ +#define LL_PWR_MODE_STOP_LPREGU (PWR_CR_LPDS) /*!< Enter Stop mode (with low power Regulator ON) when the CPU enters deepsleep */ +#if defined(PWR_CR_MRUDS) && defined(PWR_CR_LPUDS) && defined(PWR_CR_FPDS) +#define LL_PWR_MODE_STOP_MAINREGU_UNDERDRIVE (PWR_CR_MRUDS | PWR_CR_FPDS) /*!< Enter Stop mode (with main Regulator in under-drive mode) when the CPU enters deepsleep */ +#define LL_PWR_MODE_STOP_LPREGU_UNDERDRIVE (PWR_CR_LPDS | PWR_CR_LPUDS | PWR_CR_FPDS) /*!< Enter Stop mode (with low power Regulator in under-drive mode) when the CPU enters deepsleep */ +#endif /* PWR_CR_MRUDS && PWR_CR_LPUDS && PWR_CR_FPDS */ +#if defined(PWR_CR_MRLVDS) && defined(PWR_CR_LPLVDS) && defined(PWR_CR_FPDS) +#define LL_PWR_MODE_STOP_MAINREGU_DEEPSLEEP (PWR_CR_MRLVDS | PWR_CR_FPDS) /*!< Enter Stop mode (with main Regulator in Deep Sleep mode) when the CPU enters deepsleep */ +#define LL_PWR_MODE_STOP_LPREGU_DEEPSLEEP (PWR_CR_LPDS | PWR_CR_LPLVDS | PWR_CR_FPDS) /*!< Enter Stop mode (with low power Regulator in Deep Sleep mode) when the CPU enters deepsleep */ +#endif /* PWR_CR_MRLVDS && PWR_CR_LPLVDS && PWR_CR_FPDS */ +#define LL_PWR_MODE_STANDBY (PWR_CR_PDDS) /*!< Enter Standby mode when the CPU enters deepsleep */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_REGU_MODE_DS_MODE Regulator Mode In Deep Sleep Mode + * @{ + */ +#define LL_PWR_REGU_DSMODE_MAIN 0x00000000U /*!< Voltage Regulator in main mode during deepsleep mode */ +#define LL_PWR_REGU_DSMODE_LOW_POWER (PWR_CR_LPDS) /*!< Voltage Regulator in low-power mode during deepsleep mode */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_PVDLEVEL Power Voltage Detector Level + * @{ + */ +#define LL_PWR_PVDLEVEL_0 (PWR_CR_PLS_LEV0) /*!< Voltage threshold detected by PVD 2.2 V */ +#define LL_PWR_PVDLEVEL_1 (PWR_CR_PLS_LEV1) /*!< Voltage threshold detected by PVD 2.3 V */ +#define LL_PWR_PVDLEVEL_2 (PWR_CR_PLS_LEV2) /*!< Voltage threshold detected by PVD 2.4 V */ +#define LL_PWR_PVDLEVEL_3 (PWR_CR_PLS_LEV3) /*!< Voltage threshold detected by PVD 2.5 V */ +#define LL_PWR_PVDLEVEL_4 (PWR_CR_PLS_LEV4) /*!< Voltage threshold detected by PVD 2.6 V */ +#define LL_PWR_PVDLEVEL_5 (PWR_CR_PLS_LEV5) /*!< Voltage threshold detected by PVD 2.7 V */ +#define LL_PWR_PVDLEVEL_6 (PWR_CR_PLS_LEV6) /*!< Voltage threshold detected by PVD 2.8 V */ +#define LL_PWR_PVDLEVEL_7 (PWR_CR_PLS_LEV7) /*!< Voltage threshold detected by PVD 2.9 V */ +/** + * @} + */ +/** @defgroup PWR_LL_EC_WAKEUP_PIN Wakeup Pins + * @{ + */ +#if defined(PWR_CSR_EWUP) +#define LL_PWR_WAKEUP_PIN1 (PWR_CSR_EWUP) /*!< WKUP pin : PA0 */ +#endif /* PWR_CSR_EWUP */ +#if defined(PWR_CSR_EWUP1) +#define LL_PWR_WAKEUP_PIN1 (PWR_CSR_EWUP1) /*!< WKUP pin 1 : PA0 */ +#endif /* PWR_CSR_EWUP1 */ +#if defined(PWR_CSR_EWUP2) +#define LL_PWR_WAKEUP_PIN2 (PWR_CSR_EWUP2) /*!< WKUP pin 2 : PC0 or PC13 according to device */ +#endif /* PWR_CSR_EWUP2 */ +#if defined(PWR_CSR_EWUP3) +#define LL_PWR_WAKEUP_PIN3 (PWR_CSR_EWUP3) /*!< WKUP pin 3 : PC1 */ +#endif /* PWR_CSR_EWUP3 */ +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros + * @{ + */ + +/** @defgroup PWR_LL_EM_WRITE_READ Common write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in PWR register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__)) + +/** + * @brief Read a value in PWR register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @defgroup PWR_LL_EF_Configuration Configuration + * @{ + */ +#if defined(PWR_CR_FISSR) +/** + * @brief Enable FLASH interface STOP while system Run is ON + * @rmtoll CR FISSR LL_PWR_EnableFLASHInterfaceSTOP + * @note This mode is enabled only with STOP low power mode. + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableFLASHInterfaceSTOP(void) +{ + SET_BIT(PWR->CR, PWR_CR_FISSR); +} + +/** + * @brief Disable FLASH Interface STOP while system Run is ON + * @rmtoll CR FISSR LL_PWR_DisableFLASHInterfaceSTOP + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableFLASHInterfaceSTOP(void) +{ + CLEAR_BIT(PWR->CR, PWR_CR_FISSR); +} + +/** + * @brief Check if FLASH Interface STOP while system Run feature is enabled + * @rmtoll CR FISSR LL_PWR_IsEnabledFLASHInterfaceSTOP + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledFLASHInterfaceSTOP(void) +{ + return (READ_BIT(PWR->CR, PWR_CR_FISSR) == (PWR_CR_FISSR)); +} +#endif /* PWR_CR_FISSR */ + +#if defined(PWR_CR_FMSSR) +/** + * @brief Enable FLASH Memory STOP while system Run is ON + * @rmtoll CR FMSSR LL_PWR_EnableFLASHMemorySTOP + * @note This mode is enabled only with STOP low power mode. + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableFLASHMemorySTOP(void) +{ + SET_BIT(PWR->CR, PWR_CR_FMSSR); +} + +/** + * @brief Disable FLASH Memory STOP while system Run is ON + * @rmtoll CR FMSSR LL_PWR_DisableFLASHMemorySTOP + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableFLASHMemorySTOP(void) +{ + CLEAR_BIT(PWR->CR, PWR_CR_FMSSR); +} + +/** + * @brief Check if FLASH Memory STOP while system Run feature is enabled + * @rmtoll CR FMSSR LL_PWR_IsEnabledFLASHMemorySTOP + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledFLASHMemorySTOP(void) +{ + return (READ_BIT(PWR->CR, PWR_CR_FMSSR) == (PWR_CR_FMSSR)); +} +#endif /* PWR_CR_FMSSR */ +#if defined(PWR_CR_UDEN) +/** + * @brief Enable Under Drive Mode + * @rmtoll CR UDEN LL_PWR_EnableUnderDriveMode + * @note This mode is enabled only with STOP low power mode. + * In this mode, the 1.2V domain is preserved in reduced leakage mode. This + * mode is only available when the main Regulator or the low power Regulator + * is in low voltage mode. + * @note If the Under-drive mode was enabled, it is automatically disabled after + * exiting Stop mode. + * When the voltage Regulator operates in Under-drive mode, an additional + * startup delay is induced when waking up from Stop mode. + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableUnderDriveMode(void) +{ + SET_BIT(PWR->CR, PWR_CR_UDEN); +} + +/** + * @brief Disable Under Drive Mode + * @rmtoll CR UDEN LL_PWR_DisableUnderDriveMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableUnderDriveMode(void) +{ + CLEAR_BIT(PWR->CR, PWR_CR_UDEN); +} + +/** + * @brief Check if Under Drive Mode is enabled + * @rmtoll CR UDEN LL_PWR_IsEnabledUnderDriveMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledUnderDriveMode(void) +{ + return (READ_BIT(PWR->CR, PWR_CR_UDEN) == (PWR_CR_UDEN)); +} +#endif /* PWR_CR_UDEN */ + +#if defined(PWR_CR_ODSWEN) +/** + * @brief Enable Over drive switching + * @rmtoll CR ODSWEN LL_PWR_EnableOverDriveSwitching + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableOverDriveSwitching(void) +{ + SET_BIT(PWR->CR, PWR_CR_ODSWEN); +} + +/** + * @brief Disable Over drive switching + * @rmtoll CR ODSWEN LL_PWR_DisableOverDriveSwitching + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableOverDriveSwitching(void) +{ + CLEAR_BIT(PWR->CR, PWR_CR_ODSWEN); +} + +/** + * @brief Check if Over drive switching is enabled + * @rmtoll CR ODSWEN LL_PWR_IsEnabledOverDriveSwitching + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledOverDriveSwitching(void) +{ + return (READ_BIT(PWR->CR, PWR_CR_ODSWEN) == (PWR_CR_ODSWEN)); +} +#endif /* PWR_CR_ODSWEN */ +#if defined(PWR_CR_ODEN) +/** + * @brief Enable Over drive Mode + * @rmtoll CR ODEN LL_PWR_EnableOverDriveMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableOverDriveMode(void) +{ + SET_BIT(PWR->CR, PWR_CR_ODEN); +} + +/** + * @brief Disable Over drive Mode + * @rmtoll CR ODEN LL_PWR_DisableOverDriveMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableOverDriveMode(void) +{ + CLEAR_BIT(PWR->CR, PWR_CR_ODEN); +} + +/** + * @brief Check if Over drive switching is enabled + * @rmtoll CR ODEN LL_PWR_IsEnabledOverDriveMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledOverDriveMode(void) +{ + return (READ_BIT(PWR->CR, PWR_CR_ODEN) == (PWR_CR_ODEN)); +} +#endif /* PWR_CR_ODEN */ +#if defined(PWR_CR_MRUDS) +/** + * @brief Enable Main Regulator in deepsleep under-drive Mode + * @rmtoll CR MRUDS LL_PWR_EnableMainRegulatorDeepSleepUDMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableMainRegulatorDeepSleepUDMode(void) +{ + SET_BIT(PWR->CR, PWR_CR_MRUDS); +} + +/** + * @brief Disable Main Regulator in deepsleep under-drive Mode + * @rmtoll CR MRUDS LL_PWR_DisableMainRegulatorDeepSleepUDMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableMainRegulatorDeepSleepUDMode(void) +{ + CLEAR_BIT(PWR->CR, PWR_CR_MRUDS); +} + +/** + * @brief Check if Main Regulator in deepsleep under-drive Mode is enabled + * @rmtoll CR MRUDS LL_PWR_IsEnabledMainRegulatorDeepSleepUDMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledMainRegulatorDeepSleepUDMode(void) +{ + return (READ_BIT(PWR->CR, PWR_CR_MRUDS) == (PWR_CR_MRUDS)); +} +#endif /* PWR_CR_MRUDS */ + +#if defined(PWR_CR_LPUDS) +/** + * @brief Enable Low Power Regulator in deepsleep under-drive Mode + * @rmtoll CR LPUDS LL_PWR_EnableLowPowerRegulatorDeepSleepUDMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableLowPowerRegulatorDeepSleepUDMode(void) +{ + SET_BIT(PWR->CR, PWR_CR_LPUDS); +} + +/** + * @brief Disable Low Power Regulator in deepsleep under-drive Mode + * @rmtoll CR LPUDS LL_PWR_DisableLowPowerRegulatorDeepSleepUDMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableLowPowerRegulatorDeepSleepUDMode(void) +{ + CLEAR_BIT(PWR->CR, PWR_CR_LPUDS); +} + +/** + * @brief Check if Low Power Regulator in deepsleep under-drive Mode is enabled + * @rmtoll CR LPUDS LL_PWR_IsEnabledLowPowerRegulatorDeepSleepUDMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledLowPowerRegulatorDeepSleepUDMode(void) +{ + return (READ_BIT(PWR->CR, PWR_CR_LPUDS) == (PWR_CR_LPUDS)); +} +#endif /* PWR_CR_LPUDS */ + +#if defined(PWR_CR_MRLVDS) +/** + * @brief Enable Main Regulator low voltage Mode + * @rmtoll CR MRLVDS LL_PWR_EnableMainRegulatorLowVoltageMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableMainRegulatorLowVoltageMode(void) +{ + SET_BIT(PWR->CR, PWR_CR_MRLVDS); +} + +/** + * @brief Disable Main Regulator low voltage Mode + * @rmtoll CR MRLVDS LL_PWR_DisableMainRegulatorLowVoltageMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableMainRegulatorLowVoltageMode(void) +{ + CLEAR_BIT(PWR->CR, PWR_CR_MRLVDS); +} + +/** + * @brief Check if Main Regulator low voltage Mode is enabled + * @rmtoll CR MRLVDS LL_PWR_IsEnabledMainRegulatorLowVoltageMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledMainRegulatorLowVoltageMode(void) +{ + return (READ_BIT(PWR->CR, PWR_CR_MRLVDS) == (PWR_CR_MRLVDS)); +} +#endif /* PWR_CR_MRLVDS */ + +#if defined(PWR_CR_LPLVDS) +/** + * @brief Enable Low Power Regulator low voltage Mode + * @rmtoll CR LPLVDS LL_PWR_EnableLowPowerRegulatorLowVoltageMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableLowPowerRegulatorLowVoltageMode(void) +{ + SET_BIT(PWR->CR, PWR_CR_LPLVDS); +} + +/** + * @brief Disable Low Power Regulator low voltage Mode + * @rmtoll CR LPLVDS LL_PWR_DisableLowPowerRegulatorLowVoltageMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableLowPowerRegulatorLowVoltageMode(void) +{ + CLEAR_BIT(PWR->CR, PWR_CR_LPLVDS); +} + +/** + * @brief Check if Low Power Regulator low voltage Mode is enabled + * @rmtoll CR LPLVDS LL_PWR_IsEnabledLowPowerRegulatorLowVoltageMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledLowPowerRegulatorLowVoltageMode(void) +{ + return (READ_BIT(PWR->CR, PWR_CR_LPLVDS) == (PWR_CR_LPLVDS)); +} +#endif /* PWR_CR_LPLVDS */ +/** + * @brief Set the main internal Regulator output voltage + * @rmtoll CR VOS LL_PWR_SetRegulVoltageScaling + * @param VoltageScaling This parameter can be one of the following values: + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1 (*) + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2 + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE3 + * (*) LL_PWR_REGU_VOLTAGE_SCALE1 is not available for STM32F401xx devices + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetRegulVoltageScaling(uint32_t VoltageScaling) +{ + MODIFY_REG(PWR->CR, PWR_CR_VOS, VoltageScaling); +} + +/** + * @brief Get the main internal Regulator output voltage + * @rmtoll CR VOS LL_PWR_GetRegulVoltageScaling + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1 (*) + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2 + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE3 + * (*) LL_PWR_REGU_VOLTAGE_SCALE1 is not available for STM32F401xx devices + */ +__STATIC_INLINE uint32_t LL_PWR_GetRegulVoltageScaling(void) +{ + return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_VOS)); +} +/** + * @brief Enable the Flash Power Down in Stop Mode + * @rmtoll CR FPDS LL_PWR_EnableFlashPowerDown + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableFlashPowerDown(void) +{ + SET_BIT(PWR->CR, PWR_CR_FPDS); +} + +/** + * @brief Disable the Flash Power Down in Stop Mode + * @rmtoll CR FPDS LL_PWR_DisableFlashPowerDown + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableFlashPowerDown(void) +{ + CLEAR_BIT(PWR->CR, PWR_CR_FPDS); +} + +/** + * @brief Check if the Flash Power Down in Stop Mode is enabled + * @rmtoll CR FPDS LL_PWR_IsEnabledFlashPowerDown + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledFlashPowerDown(void) +{ + return (READ_BIT(PWR->CR, PWR_CR_FPDS) == (PWR_CR_FPDS)); +} + +/** + * @brief Enable access to the backup domain + * @rmtoll CR DBP LL_PWR_EnableBkUpAccess + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableBkUpAccess(void) +{ + SET_BIT(PWR->CR, PWR_CR_DBP); +} + +/** + * @brief Disable access to the backup domain + * @rmtoll CR DBP LL_PWR_DisableBkUpAccess + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableBkUpAccess(void) +{ + CLEAR_BIT(PWR->CR, PWR_CR_DBP); +} + +/** + * @brief Check if the backup domain is enabled + * @rmtoll CR DBP LL_PWR_IsEnabledBkUpAccess + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void) +{ + return (READ_BIT(PWR->CR, PWR_CR_DBP) == (PWR_CR_DBP)); +} +/** + * @brief Enable the backup Regulator + * @rmtoll CSR BRE LL_PWR_EnableBkUpRegulator + * @note The BRE bit of the PWR_CSR register is protected against parasitic write access. + * The LL_PWR_EnableBkUpAccess() must be called before using this API. + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableBkUpRegulator(void) +{ + SET_BIT(PWR->CSR, PWR_CSR_BRE); +} + +/** + * @brief Disable the backup Regulator + * @rmtoll CSR BRE LL_PWR_DisableBkUpRegulator + * @note The BRE bit of the PWR_CSR register is protected against parasitic write access. + * The LL_PWR_EnableBkUpAccess() must be called before using this API. + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableBkUpRegulator(void) +{ + CLEAR_BIT(PWR->CSR, PWR_CSR_BRE); +} + +/** + * @brief Check if the backup Regulator is enabled + * @rmtoll CSR BRE LL_PWR_IsEnabledBkUpRegulator + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpRegulator(void) +{ + return (READ_BIT(PWR->CSR, PWR_CSR_BRE) == (PWR_CSR_BRE)); +} + +/** + * @brief Set voltage Regulator mode during deep sleep mode + * @rmtoll CR LPDS LL_PWR_SetRegulModeDS + * @param RegulMode This parameter can be one of the following values: + * @arg @ref LL_PWR_REGU_DSMODE_MAIN + * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetRegulModeDS(uint32_t RegulMode) +{ + MODIFY_REG(PWR->CR, PWR_CR_LPDS, RegulMode); +} + +/** + * @brief Get voltage Regulator mode during deep sleep mode + * @rmtoll CR LPDS LL_PWR_GetRegulModeDS + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_REGU_DSMODE_MAIN + * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER + */ +__STATIC_INLINE uint32_t LL_PWR_GetRegulModeDS(void) +{ + return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_LPDS)); +} + +/** + * @brief Set Power Down mode when CPU enters deepsleep + * @rmtoll CR PDDS LL_PWR_SetPowerMode\n + * @rmtoll CR MRUDS LL_PWR_SetPowerMode\n + * @rmtoll CR LPUDS LL_PWR_SetPowerMode\n + * @rmtoll CR FPDS LL_PWR_SetPowerMode\n + * @rmtoll CR MRLVDS LL_PWR_SetPowerMode\n + * @rmtoll CR LPlVDS LL_PWR_SetPowerMode\n + * @rmtoll CR FPDS LL_PWR_SetPowerMode\n + * @rmtoll CR LPDS LL_PWR_SetPowerMode + * @param PDMode This parameter can be one of the following values: + * @arg @ref LL_PWR_MODE_STOP_MAINREGU + * @arg @ref LL_PWR_MODE_STOP_LPREGU + * @arg @ref LL_PWR_MODE_STOP_MAINREGU_UNDERDRIVE (*) + * @arg @ref LL_PWR_MODE_STOP_LPREGU_UNDERDRIVE (*) + * @arg @ref LL_PWR_MODE_STOP_MAINREGU_DEEPSLEEP (*) + * @arg @ref LL_PWR_MODE_STOP_LPREGU_DEEPSLEEP (*) + * + * (*) not available on all devices + * @arg @ref LL_PWR_MODE_STANDBY + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t PDMode) +{ +#if defined(PWR_CR_MRUDS) && defined(PWR_CR_LPUDS) && defined(PWR_CR_FPDS) + MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_FPDS | PWR_CR_LPUDS | PWR_CR_MRUDS), PDMode); +#elif defined(PWR_CR_MRLVDS) && defined(PWR_CR_LPLVDS) && defined(PWR_CR_FPDS) + MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_FPDS | PWR_CR_LPLVDS | PWR_CR_MRLVDS), PDMode); +#else + MODIFY_REG(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS), PDMode); +#endif /* PWR_CR_MRUDS && PWR_CR_LPUDS && PWR_CR_FPDS */ +} + +/** + * @brief Get Power Down mode when CPU enters deepsleep + * @rmtoll CR PDDS LL_PWR_GetPowerMode\n + * @rmtoll CR MRUDS LL_PWR_GetPowerMode\n + * @rmtoll CR LPUDS LL_PWR_GetPowerMode\n + * @rmtoll CR FPDS LL_PWR_GetPowerMode\n + * @rmtoll CR MRLVDS LL_PWR_GetPowerMode\n + * @rmtoll CR LPLVDS LL_PWR_GetPowerMode\n + * @rmtoll CR FPDS LL_PWR_GetPowerMode\n + * @rmtoll CR LPDS LL_PWR_GetPowerMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_MODE_STOP_MAINREGU + * @arg @ref LL_PWR_MODE_STOP_LPREGU + * @arg @ref LL_PWR_MODE_STOP_MAINREGU_UNDERDRIVE (*) + * @arg @ref LL_PWR_MODE_STOP_LPREGU_UNDERDRIVE (*) + * @arg @ref LL_PWR_MODE_STOP_MAINREGU_DEEPSLEEP (*) + * @arg @ref LL_PWR_MODE_STOP_LPREGU_DEEPSLEEP (*) + * + * (*) not available on all devices + * @arg @ref LL_PWR_MODE_STANDBY + */ +__STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void) +{ +#if defined(PWR_CR_MRUDS) && defined(PWR_CR_LPUDS) && defined(PWR_CR_FPDS) + return (uint32_t)(READ_BIT(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_FPDS | PWR_CR_LPUDS | PWR_CR_MRUDS))); +#elif defined(PWR_CR_MRLVDS) && defined(PWR_CR_LPLVDS) && defined(PWR_CR_FPDS) + return (uint32_t)(READ_BIT(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_FPDS | PWR_CR_LPLVDS | PWR_CR_MRLVDS))); +#else + return (uint32_t)(READ_BIT(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS))); +#endif /* PWR_CR_MRUDS && PWR_CR_LPUDS && PWR_CR_FPDS */ +} + +/** + * @brief Configure the voltage threshold detected by the Power Voltage Detector + * @rmtoll CR PLS LL_PWR_SetPVDLevel + * @param PVDLevel This parameter can be one of the following values: + * @arg @ref LL_PWR_PVDLEVEL_0 + * @arg @ref LL_PWR_PVDLEVEL_1 + * @arg @ref LL_PWR_PVDLEVEL_2 + * @arg @ref LL_PWR_PVDLEVEL_3 + * @arg @ref LL_PWR_PVDLEVEL_4 + * @arg @ref LL_PWR_PVDLEVEL_5 + * @arg @ref LL_PWR_PVDLEVEL_6 + * @arg @ref LL_PWR_PVDLEVEL_7 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetPVDLevel(uint32_t PVDLevel) +{ + MODIFY_REG(PWR->CR, PWR_CR_PLS, PVDLevel); +} + +/** + * @brief Get the voltage threshold detection + * @rmtoll CR PLS LL_PWR_GetPVDLevel + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_PVDLEVEL_0 + * @arg @ref LL_PWR_PVDLEVEL_1 + * @arg @ref LL_PWR_PVDLEVEL_2 + * @arg @ref LL_PWR_PVDLEVEL_3 + * @arg @ref LL_PWR_PVDLEVEL_4 + * @arg @ref LL_PWR_PVDLEVEL_5 + * @arg @ref LL_PWR_PVDLEVEL_6 + * @arg @ref LL_PWR_PVDLEVEL_7 + */ +__STATIC_INLINE uint32_t LL_PWR_GetPVDLevel(void) +{ + return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_PLS)); +} + +/** + * @brief Enable Power Voltage Detector + * @rmtoll CR PVDE LL_PWR_EnablePVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnablePVD(void) +{ + SET_BIT(PWR->CR, PWR_CR_PVDE); +} + +/** + * @brief Disable Power Voltage Detector + * @rmtoll CR PVDE LL_PWR_DisablePVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisablePVD(void) +{ + CLEAR_BIT(PWR->CR, PWR_CR_PVDE); +} + +/** + * @brief Check if Power Voltage Detector is enabled + * @rmtoll CR PVDE LL_PWR_IsEnabledPVD + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void) +{ + return (READ_BIT(PWR->CR, PWR_CR_PVDE) == (PWR_CR_PVDE)); +} + +/** + * @brief Enable the WakeUp PINx functionality + * @rmtoll CSR EWUP LL_PWR_EnableWakeUpPin\n + * @rmtoll CSR EWUP1 LL_PWR_EnableWakeUpPin\n + * @rmtoll CSR EWUP2 LL_PWR_EnableWakeUpPin\n + * @rmtoll CSR EWUP3 LL_PWR_EnableWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 (*) + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * + * (*) not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin) +{ + SET_BIT(PWR->CSR, WakeUpPin); +} + +/** + * @brief Disable the WakeUp PINx functionality + * @rmtoll CSR EWUP LL_PWR_DisableWakeUpPin\n + * @rmtoll CSR EWUP1 LL_PWR_DisableWakeUpPin\n + * @rmtoll CSR EWUP2 LL_PWR_DisableWakeUpPin\n + * @rmtoll CSR EWUP3 LL_PWR_DisableWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 (*) + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * + * (*) not available on all devices + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin) +{ + CLEAR_BIT(PWR->CSR, WakeUpPin); +} + +/** + * @brief Check if the WakeUp PINx functionality is enabled + * @rmtoll CSR EWUP LL_PWR_IsEnabledWakeUpPin\n + * @rmtoll CSR EWUP1 LL_PWR_IsEnabledWakeUpPin\n + * @rmtoll CSR EWUP2 LL_PWR_IsEnabledWakeUpPin\n + * @rmtoll CSR EWUP3 LL_PWR_IsEnabledWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 (*) + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * + * (*) not available on all devices + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin) +{ + return (READ_BIT(PWR->CSR, WakeUpPin) == (WakeUpPin)); +} + + +/** + * @} + */ + +/** @defgroup PWR_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Wake-up Flag + * @rmtoll CSR WUF LL_PWR_IsActiveFlag_WU + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU(void) +{ + return (READ_BIT(PWR->CSR, PWR_CSR_WUF) == (PWR_CSR_WUF)); +} + +/** + * @brief Get Standby Flag + * @rmtoll CSR SBF LL_PWR_IsActiveFlag_SB + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SB(void) +{ + return (READ_BIT(PWR->CSR, PWR_CSR_SBF) == (PWR_CSR_SBF)); +} + +/** + * @brief Get Backup Regulator ready Flag + * @rmtoll CSR BRR LL_PWR_IsActiveFlag_BRR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_BRR(void) +{ + return (READ_BIT(PWR->CSR, PWR_CSR_BRR) == (PWR_CSR_BRR)); +} +/** + * @brief Indicate whether VDD voltage is below the selected PVD threshold + * @rmtoll CSR PVDO LL_PWR_IsActiveFlag_PVDO + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void) +{ + return (READ_BIT(PWR->CSR, PWR_CSR_PVDO) == (PWR_CSR_PVDO)); +} + +/** + * @brief Indicate whether the Regulator is ready in the selected voltage range or if its output voltage is still changing to the required voltage level + * @rmtoll CSR VOS LL_PWR_IsActiveFlag_VOS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VOS(void) +{ + return (READ_BIT(PWR->CSR, LL_PWR_CSR_VOS) == (LL_PWR_CSR_VOS)); +} +#if defined(PWR_CR_ODEN) +/** + * @brief Indicate whether the Over-Drive mode is ready or not + * @rmtoll CSR ODRDY LL_PWR_IsActiveFlag_OD + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_OD(void) +{ + return (READ_BIT(PWR->CSR, PWR_CSR_ODRDY) == (PWR_CSR_ODRDY)); +} +#endif /* PWR_CR_ODEN */ + +#if defined(PWR_CR_ODSWEN) +/** + * @brief Indicate whether the Over-Drive mode switching is ready or not + * @rmtoll CSR ODSWRDY LL_PWR_IsActiveFlag_ODSW + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_ODSW(void) +{ + return (READ_BIT(PWR->CSR, PWR_CSR_ODSWRDY) == (PWR_CSR_ODSWRDY)); +} +#endif /* PWR_CR_ODSWEN */ + +#if defined(PWR_CR_UDEN) +/** + * @brief Indicate whether the Under-Drive mode is ready or not + * @rmtoll CSR UDRDY LL_PWR_IsActiveFlag_UD + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_UD(void) +{ + return (READ_BIT(PWR->CSR, PWR_CSR_UDRDY) == (PWR_CSR_UDRDY)); +} +#endif /* PWR_CR_UDEN */ +/** + * @brief Clear Standby Flag + * @rmtoll CR CSBF LL_PWR_ClearFlag_SB + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_SB(void) +{ + SET_BIT(PWR->CR, PWR_CR_CSBF); +} + +/** + * @brief Clear Wake-up Flags + * @rmtoll CR CWUF LL_PWR_ClearFlag_WU + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU(void) +{ + SET_BIT(PWR->CR, PWR_CR_CWUF); +} +#if defined(PWR_CSR_UDRDY) +/** + * @brief Clear Under-Drive ready Flag + * @rmtoll CSR UDRDY LL_PWR_ClearFlag_UD + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_UD(void) +{ + WRITE_REG(PWR->CSR, PWR_CSR_UDRDY); +} +#endif /* PWR_CSR_UDRDY */ + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup PWR_LL_EF_Init De-initialization function + * @{ + */ +ErrorStatus LL_PWR_DeInit(void); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(PWR) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_LL_PWR_H */ diff --git a/Drivers/stm32f4xx_ll_rcc.h b/libs/hal/stm32f4xx_ll_rcc.h similarity index 97% rename from Drivers/stm32f4xx_ll_rcc.h rename to libs/hal/stm32f4xx_ll_rcc.h index 1f2a91d..1df1b58 100644 --- a/Drivers/stm32f4xx_ll_rcc.h +++ b/libs/hal/stm32f4xx_ll_rcc.h @@ -1,7096 +1,7096 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_rcc.h - * @author MCD Application Team - * @brief Header file of RCC LL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file in - * the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_RCC_H -#define __STM32F4xx_LL_RCC_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined(RCC) - -/** @defgroup RCC_LL RCC - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @defgroup RCC_LL_Private_Variables RCC Private Variables - * @{ - */ - -#if defined(RCC_DCKCFGR_PLLSAIDIVR) -static const uint8_t aRCC_PLLSAIDIVRPrescTable[4] = {2, 4, 8, 16}; -#endif /* RCC_DCKCFGR_PLLSAIDIVR */ - -/** - * @} - */ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup RCC_LL_Private_Macros RCC Private Macros - * @{ - */ -/** - * @} - */ -#endif /*USE_FULL_LL_DRIVER*/ -/* Exported types ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup RCC_LL_Exported_Types RCC Exported Types - * @{ - */ - -/** @defgroup LL_ES_CLOCK_FREQ Clocks Frequency Structure - * @{ - */ - -/** - * @brief RCC Clocks Frequency Structure - */ -typedef struct -{ - uint32_t SYSCLK_Frequency; /*!< SYSCLK clock frequency */ - uint32_t HCLK_Frequency; /*!< HCLK clock frequency */ - uint32_t PCLK1_Frequency; /*!< PCLK1 clock frequency */ - uint32_t PCLK2_Frequency; /*!< PCLK2 clock frequency */ -} LL_RCC_ClocksTypeDef; - -/** - * @} - */ - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup RCC_LL_Exported_Constants RCC Exported Constants - * @{ - */ - -/** @defgroup RCC_LL_EC_OSC_VALUES Oscillator Values adaptation - * @brief Defines used to adapt values of different oscillators - * @note These values could be modified in the user environment according to - * HW set-up. - * @{ - */ -#if !defined (HSE_VALUE) -#define HSE_VALUE 25000000U /*!< Value of the HSE oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSI_VALUE) -#define HSI_VALUE 16000000U /*!< Value of the HSI oscillator in Hz */ -#endif /* HSI_VALUE */ - -#if !defined (LSE_VALUE) -#define LSE_VALUE 32768U /*!< Value of the LSE oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSI_VALUE) -#define LSI_VALUE 32000U /*!< Value of the LSI oscillator in Hz */ -#endif /* LSI_VALUE */ - -#if !defined (EXTERNAL_CLOCK_VALUE) -#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the I2S_CKIN external oscillator in Hz */ -#endif /* EXTERNAL_CLOCK_VALUE */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_CLEAR_FLAG Clear Flags Defines - * @brief Flags defines which can be used with LL_RCC_WriteReg function - * @{ - */ -#define LL_RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC /*!< LSI Ready Interrupt Clear */ -#define LL_RCC_CIR_LSERDYC RCC_CIR_LSERDYC /*!< LSE Ready Interrupt Clear */ -#define LL_RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC /*!< HSI Ready Interrupt Clear */ -#define LL_RCC_CIR_HSERDYC RCC_CIR_HSERDYC /*!< HSE Ready Interrupt Clear */ -#define LL_RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC /*!< PLL Ready Interrupt Clear */ -#if defined(RCC_PLLI2S_SUPPORT) -#define LL_RCC_CIR_PLLI2SRDYC RCC_CIR_PLLI2SRDYC /*!< PLLI2S Ready Interrupt Clear */ -#endif /* RCC_PLLI2S_SUPPORT */ -#if defined(RCC_PLLSAI_SUPPORT) -#define LL_RCC_CIR_PLLSAIRDYC RCC_CIR_PLLSAIRDYC /*!< PLLSAI Ready Interrupt Clear */ -#endif /* RCC_PLLSAI_SUPPORT */ -#define LL_RCC_CIR_CSSC RCC_CIR_CSSC /*!< Clock Security System Interrupt Clear */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_GET_FLAG Get Flags Defines - * @brief Flags defines which can be used with LL_RCC_ReadReg function - * @{ - */ -#define LL_RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF /*!< LSI Ready Interrupt flag */ -#define LL_RCC_CIR_LSERDYF RCC_CIR_LSERDYF /*!< LSE Ready Interrupt flag */ -#define LL_RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF /*!< HSI Ready Interrupt flag */ -#define LL_RCC_CIR_HSERDYF RCC_CIR_HSERDYF /*!< HSE Ready Interrupt flag */ -#define LL_RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF /*!< PLL Ready Interrupt flag */ -#if defined(RCC_PLLI2S_SUPPORT) -#define LL_RCC_CIR_PLLI2SRDYF RCC_CIR_PLLI2SRDYF /*!< PLLI2S Ready Interrupt flag */ -#endif /* RCC_PLLI2S_SUPPORT */ -#if defined(RCC_PLLSAI_SUPPORT) -#define LL_RCC_CIR_PLLSAIRDYF RCC_CIR_PLLSAIRDYF /*!< PLLSAI Ready Interrupt flag */ -#endif /* RCC_PLLSAI_SUPPORT */ -#define LL_RCC_CIR_CSSF RCC_CIR_CSSF /*!< Clock Security System Interrupt flag */ -#define LL_RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF /*!< Low-Power reset flag */ -#define LL_RCC_CSR_PINRSTF RCC_CSR_PINRSTF /*!< PIN reset flag */ -#define LL_RCC_CSR_PORRSTF RCC_CSR_PORRSTF /*!< POR/PDR reset flag */ -#define LL_RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF /*!< Software Reset flag */ -#define LL_RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */ -#define LL_RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */ -#if defined(RCC_CSR_BORRSTF) -#define LL_RCC_CSR_BORRSTF RCC_CSR_BORRSTF /*!< BOR reset flag */ -#endif /* RCC_CSR_BORRSTF */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_IT IT Defines - * @brief IT defines which can be used with LL_RCC_ReadReg and LL_RCC_WriteReg functions - * @{ - */ -#define LL_RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE /*!< LSI Ready Interrupt Enable */ -#define LL_RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE /*!< LSE Ready Interrupt Enable */ -#define LL_RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE /*!< HSI Ready Interrupt Enable */ -#define LL_RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE /*!< HSE Ready Interrupt Enable */ -#define LL_RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE /*!< PLL Ready Interrupt Enable */ -#if defined(RCC_PLLI2S_SUPPORT) -#define LL_RCC_CIR_PLLI2SRDYIE RCC_CIR_PLLI2SRDYIE /*!< PLLI2S Ready Interrupt Enable */ -#endif /* RCC_PLLI2S_SUPPORT */ -#if defined(RCC_PLLSAI_SUPPORT) -#define LL_RCC_CIR_PLLSAIRDYIE RCC_CIR_PLLSAIRDYIE /*!< PLLSAI Ready Interrupt Enable */ -#endif /* RCC_PLLSAI_SUPPORT */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_SYS_CLKSOURCE System clock switch - * @{ - */ -#define LL_RCC_SYS_CLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selection as system clock */ -#define LL_RCC_SYS_CLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selection as system clock */ -#define LL_RCC_SYS_CLKSOURCE_PLL RCC_CFGR_SW_PLL /*!< PLL selection as system clock */ -#if defined(RCC_CFGR_SW_PLLR) -#define LL_RCC_SYS_CLKSOURCE_PLLR RCC_CFGR_SW_PLLR /*!< PLLR selection as system clock */ -#endif /* RCC_CFGR_SW_PLLR */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_SYS_CLKSOURCE_STATUS System clock switch status - * @{ - */ -#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ -#define LL_RCC_SYS_CLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ -#define LL_RCC_SYS_CLKSOURCE_STATUS_PLL RCC_CFGR_SWS_PLL /*!< PLL used as system clock */ -#if defined(RCC_PLLR_SYSCLK_SUPPORT) -#define LL_RCC_SYS_CLKSOURCE_STATUS_PLLR RCC_CFGR_SWS_PLLR /*!< PLLR used as system clock */ -#endif /* RCC_PLLR_SYSCLK_SUPPORT */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_SYSCLK_DIV AHB prescaler - * @{ - */ -#define LL_RCC_SYSCLK_DIV_1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */ -#define LL_RCC_SYSCLK_DIV_2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */ -#define LL_RCC_SYSCLK_DIV_4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */ -#define LL_RCC_SYSCLK_DIV_8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */ -#define LL_RCC_SYSCLK_DIV_16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */ -#define LL_RCC_SYSCLK_DIV_64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */ -#define LL_RCC_SYSCLK_DIV_128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */ -#define LL_RCC_SYSCLK_DIV_256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */ -#define LL_RCC_SYSCLK_DIV_512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_APB1_DIV APB low-speed prescaler (APB1) - * @{ - */ -#define LL_RCC_APB1_DIV_1 RCC_CFGR_PPRE1_DIV1 /*!< HCLK not divided */ -#define LL_RCC_APB1_DIV_2 RCC_CFGR_PPRE1_DIV2 /*!< HCLK divided by 2 */ -#define LL_RCC_APB1_DIV_4 RCC_CFGR_PPRE1_DIV4 /*!< HCLK divided by 4 */ -#define LL_RCC_APB1_DIV_8 RCC_CFGR_PPRE1_DIV8 /*!< HCLK divided by 8 */ -#define LL_RCC_APB1_DIV_16 RCC_CFGR_PPRE1_DIV16 /*!< HCLK divided by 16 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_APB2_DIV APB high-speed prescaler (APB2) - * @{ - */ -#define LL_RCC_APB2_DIV_1 RCC_CFGR_PPRE2_DIV1 /*!< HCLK not divided */ -#define LL_RCC_APB2_DIV_2 RCC_CFGR_PPRE2_DIV2 /*!< HCLK divided by 2 */ -#define LL_RCC_APB2_DIV_4 RCC_CFGR_PPRE2_DIV4 /*!< HCLK divided by 4 */ -#define LL_RCC_APB2_DIV_8 RCC_CFGR_PPRE2_DIV8 /*!< HCLK divided by 8 */ -#define LL_RCC_APB2_DIV_16 RCC_CFGR_PPRE2_DIV16 /*!< HCLK divided by 16 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_MCOxSOURCE MCO source selection - * @{ - */ -#define LL_RCC_MCO1SOURCE_HSI (uint32_t)(RCC_CFGR_MCO1|0x00000000U) /*!< HSI selection as MCO1 source */ -#define LL_RCC_MCO1SOURCE_LSE (uint32_t)(RCC_CFGR_MCO1|(RCC_CFGR_MCO1_0 >> 16U)) /*!< LSE selection as MCO1 source */ -#define LL_RCC_MCO1SOURCE_HSE (uint32_t)(RCC_CFGR_MCO1|(RCC_CFGR_MCO1_1 >> 16U)) /*!< HSE selection as MCO1 source */ -#define LL_RCC_MCO1SOURCE_PLLCLK (uint32_t)(RCC_CFGR_MCO1|((RCC_CFGR_MCO1_1|RCC_CFGR_MCO1_0) >> 16U)) /*!< PLLCLK selection as MCO1 source */ -#if defined(RCC_CFGR_MCO2) -#define LL_RCC_MCO2SOURCE_SYSCLK (uint32_t)(RCC_CFGR_MCO2|0x00000000U) /*!< SYSCLK selection as MCO2 source */ -#define LL_RCC_MCO2SOURCE_PLLI2S (uint32_t)(RCC_CFGR_MCO2|(RCC_CFGR_MCO2_0 >> 16U)) /*!< PLLI2S selection as MCO2 source */ -#define LL_RCC_MCO2SOURCE_HSE (uint32_t)(RCC_CFGR_MCO2|(RCC_CFGR_MCO2_1 >> 16U)) /*!< HSE selection as MCO2 source */ -#define LL_RCC_MCO2SOURCE_PLLCLK (uint32_t)(RCC_CFGR_MCO2|((RCC_CFGR_MCO2_1|RCC_CFGR_MCO2_0) >> 16U)) /*!< PLLCLK selection as MCO2 source */ -#endif /* RCC_CFGR_MCO2 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_MCOx_DIV MCO prescaler - * @{ - */ -#define LL_RCC_MCO1_DIV_1 (uint32_t)(RCC_CFGR_MCO1PRE|0x00000000U) /*!< MCO1 not divided */ -#define LL_RCC_MCO1_DIV_2 (uint32_t)(RCC_CFGR_MCO1PRE|(RCC_CFGR_MCO1PRE_2 >> 16U)) /*!< MCO1 divided by 2 */ -#define LL_RCC_MCO1_DIV_3 (uint32_t)(RCC_CFGR_MCO1PRE|((RCC_CFGR_MCO1PRE_2|RCC_CFGR_MCO1PRE_0) >> 16U)) /*!< MCO1 divided by 3 */ -#define LL_RCC_MCO1_DIV_4 (uint32_t)(RCC_CFGR_MCO1PRE|((RCC_CFGR_MCO1PRE_2|RCC_CFGR_MCO1PRE_1) >> 16U)) /*!< MCO1 divided by 4 */ -#define LL_RCC_MCO1_DIV_5 (uint32_t)(RCC_CFGR_MCO1PRE|(RCC_CFGR_MCO1PRE >> 16U)) /*!< MCO1 divided by 5 */ -#if defined(RCC_CFGR_MCO2PRE) -#define LL_RCC_MCO2_DIV_1 (uint32_t)(RCC_CFGR_MCO2PRE|0x00000000U) /*!< MCO2 not divided */ -#define LL_RCC_MCO2_DIV_2 (uint32_t)(RCC_CFGR_MCO2PRE|(RCC_CFGR_MCO2PRE_2 >> 16U)) /*!< MCO2 divided by 2 */ -#define LL_RCC_MCO2_DIV_3 (uint32_t)(RCC_CFGR_MCO2PRE|((RCC_CFGR_MCO2PRE_2|RCC_CFGR_MCO2PRE_0) >> 16U)) /*!< MCO2 divided by 3 */ -#define LL_RCC_MCO2_DIV_4 (uint32_t)(RCC_CFGR_MCO2PRE|((RCC_CFGR_MCO2PRE_2|RCC_CFGR_MCO2PRE_1) >> 16U)) /*!< MCO2 divided by 4 */ -#define LL_RCC_MCO2_DIV_5 (uint32_t)(RCC_CFGR_MCO2PRE|(RCC_CFGR_MCO2PRE >> 16U)) /*!< MCO2 divided by 5 */ -#endif /* RCC_CFGR_MCO2PRE */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_RTC_HSEDIV HSE prescaler for RTC clock - * @{ - */ -#define LL_RCC_RTC_NOCLOCK 0x00000000U /*!< HSE not divided */ -#define LL_RCC_RTC_HSE_DIV_2 RCC_CFGR_RTCPRE_1 /*!< HSE clock divided by 2 */ -#define LL_RCC_RTC_HSE_DIV_3 (RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 3 */ -#define LL_RCC_RTC_HSE_DIV_4 RCC_CFGR_RTCPRE_2 /*!< HSE clock divided by 4 */ -#define LL_RCC_RTC_HSE_DIV_5 (RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 5 */ -#define LL_RCC_RTC_HSE_DIV_6 (RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 6 */ -#define LL_RCC_RTC_HSE_DIV_7 (RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 7 */ -#define LL_RCC_RTC_HSE_DIV_8 RCC_CFGR_RTCPRE_3 /*!< HSE clock divided by 8 */ -#define LL_RCC_RTC_HSE_DIV_9 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 9 */ -#define LL_RCC_RTC_HSE_DIV_10 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 10 */ -#define LL_RCC_RTC_HSE_DIV_11 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 11 */ -#define LL_RCC_RTC_HSE_DIV_12 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2) /*!< HSE clock divided by 12 */ -#define LL_RCC_RTC_HSE_DIV_13 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 13 */ -#define LL_RCC_RTC_HSE_DIV_14 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 14 */ -#define LL_RCC_RTC_HSE_DIV_15 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 15 */ -#define LL_RCC_RTC_HSE_DIV_16 RCC_CFGR_RTCPRE_4 /*!< HSE clock divided by 16 */ -#define LL_RCC_RTC_HSE_DIV_17 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 17 */ -#define LL_RCC_RTC_HSE_DIV_18 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 18 */ -#define LL_RCC_RTC_HSE_DIV_19 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 19 */ -#define LL_RCC_RTC_HSE_DIV_20 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2) /*!< HSE clock divided by 20 */ -#define LL_RCC_RTC_HSE_DIV_21 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 21 */ -#define LL_RCC_RTC_HSE_DIV_22 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 22 */ -#define LL_RCC_RTC_HSE_DIV_23 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 23 */ -#define LL_RCC_RTC_HSE_DIV_24 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3) /*!< HSE clock divided by 24 */ -#define LL_RCC_RTC_HSE_DIV_25 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 25 */ -#define LL_RCC_RTC_HSE_DIV_26 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 26 */ -#define LL_RCC_RTC_HSE_DIV_27 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 27 */ -#define LL_RCC_RTC_HSE_DIV_28 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2) /*!< HSE clock divided by 28 */ -#define LL_RCC_RTC_HSE_DIV_29 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 29 */ -#define LL_RCC_RTC_HSE_DIV_30 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 30 */ -#define LL_RCC_RTC_HSE_DIV_31 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 31 */ -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup RCC_LL_EC_PERIPH_FREQUENCY Peripheral clock frequency - * @{ - */ -#define LL_RCC_PERIPH_FREQUENCY_NO 0x00000000U /*!< No clock enabled for the peripheral */ -#define LL_RCC_PERIPH_FREQUENCY_NA 0xFFFFFFFFU /*!< Frequency cannot be provided as external clock */ -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -#if defined(FMPI2C1) -/** @defgroup RCC_LL_EC_FMPI2C1_CLKSOURCE Peripheral FMPI2C clock source selection - * @{ - */ -#define LL_RCC_FMPI2C1_CLKSOURCE_PCLK1 0x00000000U /*!< PCLK1 clock used as FMPI2C1 clock source */ -#define LL_RCC_FMPI2C1_CLKSOURCE_SYSCLK RCC_DCKCFGR2_FMPI2C1SEL_0 /*!< SYSCLK clock used as FMPI2C1 clock source */ -#define LL_RCC_FMPI2C1_CLKSOURCE_HSI RCC_DCKCFGR2_FMPI2C1SEL_1 /*!< HSI clock used as FMPI2C1 clock source */ -/** - * @} - */ -#endif /* FMPI2C1 */ - -#if defined(LPTIM1) -/** @defgroup RCC_LL_EC_LPTIM1_CLKSOURCE Peripheral LPTIM clock source selection - * @{ - */ -#define LL_RCC_LPTIM1_CLKSOURCE_PCLK1 0x00000000U /*!< PCLK1 clock used as LPTIM1 clock */ -#define LL_RCC_LPTIM1_CLKSOURCE_HSI RCC_DCKCFGR2_LPTIM1SEL_0 /*!< LSI oscillator clock used as LPTIM1 clock */ -#define LL_RCC_LPTIM1_CLKSOURCE_LSI RCC_DCKCFGR2_LPTIM1SEL_1 /*!< HSI oscillator clock used as LPTIM1 clock */ -#define LL_RCC_LPTIM1_CLKSOURCE_LSE (uint32_t)(RCC_DCKCFGR2_LPTIM1SEL_1 | RCC_DCKCFGR2_LPTIM1SEL_0) /*!< LSE oscillator clock used as LPTIM1 clock */ -/** - * @} - */ -#endif /* LPTIM1 */ - -#if defined(SAI1) -/** @defgroup RCC_LL_EC_SAIx_CLKSOURCE Peripheral SAI clock source selection - * @{ - */ -#if defined(RCC_DCKCFGR_SAI1SRC) -#define LL_RCC_SAI1_CLKSOURCE_PLLSAI (uint32_t)(RCC_DCKCFGR_SAI1SRC | 0x00000000U) /*!< PLLSAI clock used as SAI1 clock source */ -#define LL_RCC_SAI1_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_SAI1SRC | (RCC_DCKCFGR_SAI1SRC_0 >> 16)) /*!< PLLI2S clock used as SAI1 clock source */ -#define LL_RCC_SAI1_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_SAI1SRC | (RCC_DCKCFGR_SAI1SRC_1 >> 16)) /*!< PLL clock used as SAI1 clock source */ -#define LL_RCC_SAI1_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_SAI1SRC | (RCC_DCKCFGR_SAI1SRC >> 16)) /*!< External pin clock used as SAI1 clock source */ -#endif /* RCC_DCKCFGR_SAI1SRC */ -#if defined(RCC_DCKCFGR_SAI2SRC) -#define LL_RCC_SAI2_CLKSOURCE_PLLSAI (uint32_t)(RCC_DCKCFGR_SAI2SRC | 0x00000000U) /*!< PLLSAI clock used as SAI2 clock source */ -#define LL_RCC_SAI2_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_SAI2SRC | (RCC_DCKCFGR_SAI2SRC_0 >> 16)) /*!< PLLI2S clock used as SAI2 clock source */ -#define LL_RCC_SAI2_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_SAI2SRC | (RCC_DCKCFGR_SAI2SRC_1 >> 16)) /*!< PLL clock used as SAI2 clock source */ -#define LL_RCC_SAI2_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR_SAI2SRC | (RCC_DCKCFGR_SAI2SRC >> 16)) /*!< PLL Main clock used as SAI2 clock source */ -#endif /* RCC_DCKCFGR_SAI2SRC */ -#if defined(RCC_DCKCFGR_SAI1ASRC) -#if defined(RCC_SAI1A_PLLSOURCE_SUPPORT) -#define LL_RCC_SAI1_A_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_SAI1ASRC | 0x00000000U) /*!< PLLI2S clock used as SAI1 block A clock source */ -#define LL_RCC_SAI1_A_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_SAI1ASRC | (RCC_DCKCFGR_SAI1ASRC_0 >> 16)) /*!< External pin used as SAI1 block A clock source */ -#define LL_RCC_SAI1_A_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_SAI1ASRC | (RCC_DCKCFGR_SAI1ASRC_1 >> 16)) /*!< PLL clock used as SAI1 block A clock source */ -#define LL_RCC_SAI1_A_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR_SAI1ASRC | (RCC_DCKCFGR_SAI1ASRC >> 16)) /*!< PLL Main clock used as SAI1 block A clock source */ -#else -#define LL_RCC_SAI1_A_CLKSOURCE_PLLSAI (uint32_t)(RCC_DCKCFGR_SAI1ASRC | 0x00000000U) /*!< PLLSAI clock used as SAI1 block A clock source */ -#define LL_RCC_SAI1_A_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_SAI1ASRC | (RCC_DCKCFGR_SAI1ASRC_0 >> 16)) /*!< PLLI2S clock used as SAI1 block A clock source */ -#define LL_RCC_SAI1_A_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_SAI1ASRC | (RCC_DCKCFGR_SAI1ASRC_1 >> 16)) /*!< External pin clock used as SAI1 block A clock source */ -#endif /* RCC_SAI1A_PLLSOURCE_SUPPORT */ -#endif /* RCC_DCKCFGR_SAI1ASRC */ -#if defined(RCC_DCKCFGR_SAI1BSRC) -#if defined(RCC_SAI1B_PLLSOURCE_SUPPORT) -#define LL_RCC_SAI1_B_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_SAI1BSRC | 0x00000000U) /*!< PLLI2S clock used as SAI1 block B clock source */ -#define LL_RCC_SAI1_B_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_SAI1BSRC | (RCC_DCKCFGR_SAI1BSRC_0 >> 16)) /*!< External pin used as SAI1 block B clock source */ -#define LL_RCC_SAI1_B_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_SAI1BSRC | (RCC_DCKCFGR_SAI1BSRC_1 >> 16)) /*!< PLL clock used as SAI1 block B clock source */ -#define LL_RCC_SAI1_B_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR_SAI1BSRC | (RCC_DCKCFGR_SAI1BSRC >> 16)) /*!< PLL Main clock used as SAI1 block B clock source */ -#else -#define LL_RCC_SAI1_B_CLKSOURCE_PLLSAI (uint32_t)(RCC_DCKCFGR_SAI1BSRC | 0x00000000U) /*!< PLLSAI clock used as SAI1 block B clock source */ -#define LL_RCC_SAI1_B_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_SAI1BSRC | (RCC_DCKCFGR_SAI1BSRC_0 >> 16)) /*!< PLLI2S clock used as SAI1 block B clock source */ -#define LL_RCC_SAI1_B_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_SAI1BSRC | (RCC_DCKCFGR_SAI1BSRC_1 >> 16)) /*!< External pin clock used as SAI1 block B clock source */ -#endif /* RCC_SAI1B_PLLSOURCE_SUPPORT */ -#endif /* RCC_DCKCFGR_SAI1BSRC */ -/** - * @} - */ -#endif /* SAI1 */ - -#if defined(RCC_DCKCFGR_SDIOSEL) || defined(RCC_DCKCFGR2_SDIOSEL) -/** @defgroup RCC_LL_EC_SDIOx_CLKSOURCE Peripheral SDIO clock source selection - * @{ - */ -#define LL_RCC_SDIO_CLKSOURCE_PLL48CLK 0x00000000U /*!< PLL 48M domain clock used as SDIO clock */ -#if defined(RCC_DCKCFGR_SDIOSEL) -#define LL_RCC_SDIO_CLKSOURCE_SYSCLK RCC_DCKCFGR_SDIOSEL /*!< System clock clock used as SDIO clock */ -#else -#define LL_RCC_SDIO_CLKSOURCE_SYSCLK RCC_DCKCFGR2_SDIOSEL /*!< System clock clock used as SDIO clock */ -#endif /* RCC_DCKCFGR_SDIOSEL */ -/** - * @} - */ -#endif /* RCC_DCKCFGR_SDIOSEL || RCC_DCKCFGR2_SDIOSEL */ - -#if defined(DSI) -/** @defgroup RCC_LL_EC_DSI_CLKSOURCE Peripheral DSI clock source selection - * @{ - */ -#define LL_RCC_DSI_CLKSOURCE_PHY 0x00000000U /*!< DSI-PHY clock used as DSI byte lane clock source */ -#define LL_RCC_DSI_CLKSOURCE_PLL RCC_DCKCFGR_DSISEL /*!< PLL clock used as DSI byte lane clock source */ -/** - * @} - */ -#endif /* DSI */ - -#if defined(CEC) -/** @defgroup RCC_LL_EC_CEC_CLKSOURCE Peripheral CEC clock source selection - * @{ - */ -#define LL_RCC_CEC_CLKSOURCE_HSI_DIV488 0x00000000U /*!< HSI oscillator clock divided by 488 used as CEC clock */ -#define LL_RCC_CEC_CLKSOURCE_LSE RCC_DCKCFGR2_CECSEL /*!< LSE oscillator clock used as CEC clock */ -/** - * @} - */ -#endif /* CEC */ - -/** @defgroup RCC_LL_EC_I2S1_CLKSOURCE Peripheral I2S clock source selection - * @{ - */ -#if defined(RCC_CFGR_I2SSRC) -#define LL_RCC_I2S1_CLKSOURCE_PLLI2S 0x00000000U /*!< I2S oscillator clock used as I2S1 clock */ -#define LL_RCC_I2S1_CLKSOURCE_PIN RCC_CFGR_I2SSRC /*!< External pin clock used as I2S1 clock */ -#endif /* RCC_CFGR_I2SSRC */ -#if defined(RCC_DCKCFGR_I2SSRC) -#define LL_RCC_I2S1_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_I2SSRC | 0x00000000U) /*!< PLL clock used as I2S1 clock source */ -#define LL_RCC_I2S1_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_I2SSRC | (RCC_DCKCFGR_I2SSRC_0 >> 16)) /*!< External pin used as I2S1 clock source */ -#define LL_RCC_I2S1_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR_I2SSRC | (RCC_DCKCFGR_I2SSRC_1 >> 16)) /*!< PLL Main clock used as I2S1 clock source */ -#endif /* RCC_DCKCFGR_I2SSRC */ -#if defined(RCC_DCKCFGR_I2S1SRC) -#define LL_RCC_I2S1_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_I2S1SRC | 0x00000000U) /*!< PLLI2S clock used as I2S1 clock source */ -#define LL_RCC_I2S1_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_I2S1SRC | (RCC_DCKCFGR_I2S1SRC_0 >> 16)) /*!< External pin used as I2S1 clock source */ -#define LL_RCC_I2S1_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_I2S1SRC | (RCC_DCKCFGR_I2S1SRC_1 >> 16)) /*!< PLL clock used as I2S1 clock source */ -#define LL_RCC_I2S1_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR_I2S1SRC | (RCC_DCKCFGR_I2S1SRC >> 16)) /*!< PLL Main clock used as I2S1 clock source */ -#endif /* RCC_DCKCFGR_I2S1SRC */ -#if defined(RCC_DCKCFGR_I2S2SRC) -#define LL_RCC_I2S2_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_I2S2SRC | 0x00000000U) /*!< PLLI2S clock used as I2S2 clock source */ -#define LL_RCC_I2S2_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_I2S2SRC | (RCC_DCKCFGR_I2S2SRC_0 >> 16)) /*!< External pin used as I2S2 clock source */ -#define LL_RCC_I2S2_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_I2S2SRC | (RCC_DCKCFGR_I2S2SRC_1 >> 16)) /*!< PLL clock used as I2S2 clock source */ -#define LL_RCC_I2S2_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR_I2S2SRC | (RCC_DCKCFGR_I2S2SRC >> 16)) /*!< PLL Main clock used as I2S2 clock source */ -#endif /* RCC_DCKCFGR_I2S2SRC */ -/** - * @} - */ - -#if defined(RCC_DCKCFGR_CK48MSEL) || defined(RCC_DCKCFGR2_CK48MSEL) -/** @defgroup RCC_LL_EC_CK48M_CLKSOURCE Peripheral 48Mhz domain clock source selection - * @{ - */ -#if defined(RCC_DCKCFGR_CK48MSEL) -#define LL_RCC_CK48M_CLKSOURCE_PLL 0x00000000U /*!< PLL oscillator clock used as 48Mhz domain clock */ -#define LL_RCC_CK48M_CLKSOURCE_PLLSAI RCC_DCKCFGR_CK48MSEL /*!< PLLSAI oscillator clock used as 48Mhz domain clock */ -#endif /* RCC_DCKCFGR_CK48MSEL */ -#if defined(RCC_DCKCFGR2_CK48MSEL) -#define LL_RCC_CK48M_CLKSOURCE_PLL 0x00000000U /*!< PLL oscillator clock used as 48Mhz domain clock */ -#if defined(RCC_PLLSAI_SUPPORT) -#define LL_RCC_CK48M_CLKSOURCE_PLLSAI RCC_DCKCFGR2_CK48MSEL /*!< PLLSAI oscillator clock used as 48Mhz domain clock */ -#endif /* RCC_PLLSAI_SUPPORT */ -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) && !defined(RCC_DCKCFGR_PLLI2SDIVQ) -#define LL_RCC_CK48M_CLKSOURCE_PLLI2S RCC_DCKCFGR2_CK48MSEL /*!< PLLI2S oscillator clock used as 48Mhz domain clock */ -#endif /* RCC_PLLI2SCFGR_PLLI2SQ && !RCC_DCKCFGR_PLLI2SDIVQ */ -#endif /* RCC_DCKCFGR2_CK48MSEL */ -/** - * @} - */ - -#if defined(RNG) -/** @defgroup RCC_LL_EC_RNG_CLKSOURCE Peripheral RNG clock source selection - * @{ - */ -#define LL_RCC_RNG_CLKSOURCE_PLL LL_RCC_CK48M_CLKSOURCE_PLL /*!< PLL clock used as RNG clock source */ -#if defined(RCC_PLLSAI_SUPPORT) -#define LL_RCC_RNG_CLKSOURCE_PLLSAI LL_RCC_CK48M_CLKSOURCE_PLLSAI /*!< PLLSAI clock used as RNG clock source */ -#endif /* RCC_PLLSAI_SUPPORT */ -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) && !defined(RCC_DCKCFGR_PLLI2SDIVQ) -#define LL_RCC_RNG_CLKSOURCE_PLLI2S LL_RCC_CK48M_CLKSOURCE_PLLI2S /*!< PLLI2S clock used as RNG clock source */ -#endif /* RCC_PLLI2SCFGR_PLLI2SQ && !RCC_DCKCFGR_PLLI2SDIVQ */ -/** - * @} - */ -#endif /* RNG */ - -#if defined(USB_OTG_FS) || defined(USB_OTG_HS) -/** @defgroup RCC_LL_EC_USB_CLKSOURCE Peripheral USB clock source selection - * @{ - */ -#define LL_RCC_USB_CLKSOURCE_PLL LL_RCC_CK48M_CLKSOURCE_PLL /*!< PLL clock used as USB clock source */ -#if defined(RCC_PLLSAI_SUPPORT) -#define LL_RCC_USB_CLKSOURCE_PLLSAI LL_RCC_CK48M_CLKSOURCE_PLLSAI /*!< PLLSAI clock used as USB clock source */ -#endif /* RCC_PLLSAI_SUPPORT */ -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) && !defined(RCC_DCKCFGR_PLLI2SDIVQ) -#define LL_RCC_USB_CLKSOURCE_PLLI2S LL_RCC_CK48M_CLKSOURCE_PLLI2S /*!< PLLI2S clock used as USB clock source */ -#endif /* RCC_PLLI2SCFGR_PLLI2SQ && !RCC_DCKCFGR_PLLI2SDIVQ */ -/** - * @} - */ -#endif /* USB_OTG_FS || USB_OTG_HS */ - -#endif /* RCC_DCKCFGR_CK48MSEL || RCC_DCKCFGR2_CK48MSEL */ - -#if defined(DFSDM1_Channel0) || defined(DFSDM2_Channel0) -/** @defgroup RCC_LL_EC_DFSDM1_AUDIO_CLKSOURCE Peripheral DFSDM Audio clock source selection - * @{ - */ -#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE_I2S1 (uint32_t)(RCC_DCKCFGR_CKDFSDM1ASEL | 0x00000000U) /*!< I2S1 clock used as DFSDM1 Audio clock source */ -#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE_I2S2 (uint32_t)(RCC_DCKCFGR_CKDFSDM1ASEL | (RCC_DCKCFGR_CKDFSDM1ASEL << 16)) /*!< I2S2 clock used as DFSDM1 Audio clock source */ -#if defined(DFSDM2_Channel0) -#define LL_RCC_DFSDM2_AUDIO_CLKSOURCE_I2S1 (uint32_t)(RCC_DCKCFGR_CKDFSDM2ASEL | 0x00000000U) /*!< I2S1 clock used as DFSDM2 Audio clock source */ -#define LL_RCC_DFSDM2_AUDIO_CLKSOURCE_I2S2 (uint32_t)(RCC_DCKCFGR_CKDFSDM2ASEL | (RCC_DCKCFGR_CKDFSDM2ASEL << 16)) /*!< I2S2 clock used as DFSDM2 Audio clock source */ -#endif /* DFSDM2_Channel0 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_DFSDM1_CLKSOURCE Peripheral DFSDM clock source selection - * @{ - */ -#define LL_RCC_DFSDM1_CLKSOURCE_PCLK2 0x00000000U /*!< PCLK2 clock used as DFSDM1 clock */ -#define LL_RCC_DFSDM1_CLKSOURCE_SYSCLK RCC_DCKCFGR_CKDFSDM1SEL /*!< System clock used as DFSDM1 clock */ -#if defined(DFSDM2_Channel0) -#define LL_RCC_DFSDM2_CLKSOURCE_PCLK2 0x00000000U /*!< PCLK2 clock used as DFSDM2 clock */ -#define LL_RCC_DFSDM2_CLKSOURCE_SYSCLK RCC_DCKCFGR_CKDFSDM1SEL /*!< System clock used as DFSDM2 clock */ -#endif /* DFSDM2_Channel0 */ -/** - * @} - */ -#endif /* DFSDM1_Channel0 || DFSDM2_Channel0 */ - -#if defined(FMPI2C1) -/** @defgroup RCC_LL_EC_FMPI2C1 Peripheral FMPI2C get clock source - * @{ - */ -#define LL_RCC_FMPI2C1_CLKSOURCE RCC_DCKCFGR2_FMPI2C1SEL /*!< FMPI2C1 Clock source selection */ -/** - * @} - */ -#endif /* FMPI2C1 */ - -#if defined(SPDIFRX) -/** @defgroup RCC_LL_EC_SPDIFRX_CLKSOURCE Peripheral SPDIFRX clock source selection - * @{ - */ -#define LL_RCC_SPDIFRX1_CLKSOURCE_PLL 0x00000000U /*!< PLL clock used as SPDIFRX clock source */ -#define LL_RCC_SPDIFRX1_CLKSOURCE_PLLI2S RCC_DCKCFGR2_SPDIFRXSEL /*!< PLLI2S clock used as SPDIFRX clock source */ -/** - * @} - */ -#endif /* SPDIFRX */ - -#if defined(LPTIM1) -/** @defgroup RCC_LL_EC_LPTIM1 Peripheral LPTIM get clock source - * @{ - */ -#define LL_RCC_LPTIM1_CLKSOURCE RCC_DCKCFGR2_LPTIM1SEL /*!< LPTIM1 Clock source selection */ -/** - * @} - */ -#endif /* LPTIM1 */ - -#if defined(SAI1) -/** @defgroup RCC_LL_EC_SAIx Peripheral SAI get clock source - * @{ - */ -#if defined(RCC_DCKCFGR_SAI1ASRC) -#define LL_RCC_SAI1_A_CLKSOURCE RCC_DCKCFGR_SAI1ASRC /*!< SAI1 block A Clock source selection */ -#endif /* RCC_DCKCFGR_SAI1ASRC */ -#if defined(RCC_DCKCFGR_SAI1BSRC) -#define LL_RCC_SAI1_B_CLKSOURCE RCC_DCKCFGR_SAI1BSRC /*!< SAI1 block B Clock source selection */ -#endif /* RCC_DCKCFGR_SAI1BSRC */ -#if defined(RCC_DCKCFGR_SAI1SRC) -#define LL_RCC_SAI1_CLKSOURCE RCC_DCKCFGR_SAI1SRC /*!< SAI1 Clock source selection */ -#endif /* RCC_DCKCFGR_SAI1SRC */ -#if defined(RCC_DCKCFGR_SAI2SRC) -#define LL_RCC_SAI2_CLKSOURCE RCC_DCKCFGR_SAI2SRC /*!< SAI2 Clock source selection */ -#endif /* RCC_DCKCFGR_SAI2SRC */ -/** - * @} - */ -#endif /* SAI1 */ - -#if defined(SDIO) -/** @defgroup RCC_LL_EC_SDIOx Peripheral SDIO get clock source - * @{ - */ -#if defined(RCC_DCKCFGR_SDIOSEL) -#define LL_RCC_SDIO_CLKSOURCE RCC_DCKCFGR_SDIOSEL /*!< SDIO Clock source selection */ -#elif defined(RCC_DCKCFGR2_SDIOSEL) -#define LL_RCC_SDIO_CLKSOURCE RCC_DCKCFGR2_SDIOSEL /*!< SDIO Clock source selection */ -#else -#define LL_RCC_SDIO_CLKSOURCE RCC_PLLCFGR_PLLQ /*!< SDIO Clock source selection */ -#endif -/** - * @} - */ -#endif /* SDIO */ - -#if defined(RCC_DCKCFGR_CK48MSEL) || defined(RCC_DCKCFGR2_CK48MSEL) -/** @defgroup RCC_LL_EC_CK48M Peripheral CK48M get clock source - * @{ - */ -#if defined(RCC_DCKCFGR_CK48MSEL) -#define LL_RCC_CK48M_CLKSOURCE RCC_DCKCFGR_CK48MSEL /*!< CK48M Domain clock source selection */ -#endif /* RCC_DCKCFGR_CK48MSEL */ -#if defined(RCC_DCKCFGR2_CK48MSEL) -#define LL_RCC_CK48M_CLKSOURCE RCC_DCKCFGR2_CK48MSEL /*!< CK48M Domain clock source selection */ -#endif /* RCC_DCKCFGR_CK48MSEL */ -/** - * @} - */ -#endif /* RCC_DCKCFGR_CK48MSEL || RCC_DCKCFGR2_CK48MSEL */ - -#if defined(RNG) -/** @defgroup RCC_LL_EC_RNG Peripheral RNG get clock source - * @{ - */ -#if defined(RCC_DCKCFGR_CK48MSEL) || defined(RCC_DCKCFGR2_CK48MSEL) -#define LL_RCC_RNG_CLKSOURCE LL_RCC_CK48M_CLKSOURCE /*!< RNG Clock source selection */ -#else -#define LL_RCC_RNG_CLKSOURCE RCC_PLLCFGR_PLLQ /*!< RNG Clock source selection */ -#endif /* RCC_DCKCFGR_CK48MSEL || RCC_DCKCFGR2_CK48MSEL */ -/** - * @} - */ -#endif /* RNG */ - -#if defined(USB_OTG_FS) || defined(USB_OTG_HS) -/** @defgroup RCC_LL_EC_USB Peripheral USB get clock source - * @{ - */ -#if defined(RCC_DCKCFGR_CK48MSEL) || defined(RCC_DCKCFGR2_CK48MSEL) -#define LL_RCC_USB_CLKSOURCE LL_RCC_CK48M_CLKSOURCE /*!< USB Clock source selection */ -#else -#define LL_RCC_USB_CLKSOURCE RCC_PLLCFGR_PLLQ /*!< USB Clock source selection */ -#endif /* RCC_DCKCFGR_CK48MSEL || RCC_DCKCFGR2_CK48MSEL */ -/** - * @} - */ -#endif /* USB_OTG_FS || USB_OTG_HS */ - -#if defined(CEC) -/** @defgroup RCC_LL_EC_CEC Peripheral CEC get clock source - * @{ - */ -#define LL_RCC_CEC_CLKSOURCE RCC_DCKCFGR2_CECSEL /*!< CEC Clock source selection */ -/** - * @} - */ -#endif /* CEC */ - -/** @defgroup RCC_LL_EC_I2S1 Peripheral I2S get clock source - * @{ - */ -#if defined(RCC_CFGR_I2SSRC) -#define LL_RCC_I2S1_CLKSOURCE RCC_CFGR_I2SSRC /*!< I2S1 Clock source selection */ -#endif /* RCC_CFGR_I2SSRC */ -#if defined(RCC_DCKCFGR_I2SSRC) -#define LL_RCC_I2S1_CLKSOURCE RCC_DCKCFGR_I2SSRC /*!< I2S1 Clock source selection */ -#endif /* RCC_DCKCFGR_I2SSRC */ -#if defined(RCC_DCKCFGR_I2S1SRC) -#define LL_RCC_I2S1_CLKSOURCE RCC_DCKCFGR_I2S1SRC /*!< I2S1 Clock source selection */ -#endif /* RCC_DCKCFGR_I2S1SRC */ -#if defined(RCC_DCKCFGR_I2S2SRC) -#define LL_RCC_I2S2_CLKSOURCE RCC_DCKCFGR_I2S2SRC /*!< I2S2 Clock source selection */ -#endif /* RCC_DCKCFGR_I2S2SRC */ -/** - * @} - */ - -#if defined(DFSDM1_Channel0) || defined(DFSDM2_Channel0) -/** @defgroup RCC_LL_EC_DFSDM_AUDIO Peripheral DFSDM Audio get clock source - * @{ - */ -#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE RCC_DCKCFGR_CKDFSDM1ASEL /*!< DFSDM1 Audio Clock source selection */ -#if defined(DFSDM2_Channel0) -#define LL_RCC_DFSDM2_AUDIO_CLKSOURCE RCC_DCKCFGR_CKDFSDM2ASEL /*!< DFSDM2 Audio Clock source selection */ -#endif /* DFSDM2_Channel0 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_DFSDM Peripheral DFSDM get clock source - * @{ - */ -#define LL_RCC_DFSDM1_CLKSOURCE RCC_DCKCFGR_CKDFSDM1SEL /*!< DFSDM1 Clock source selection */ -#if defined(DFSDM2_Channel0) -#define LL_RCC_DFSDM2_CLKSOURCE RCC_DCKCFGR_CKDFSDM1SEL /*!< DFSDM2 Clock source selection */ -#endif /* DFSDM2_Channel0 */ -/** - * @} - */ -#endif /* DFSDM1_Channel0 || DFSDM2_Channel0 */ - -#if defined(SPDIFRX) -/** @defgroup RCC_LL_EC_SPDIFRX Peripheral SPDIFRX get clock source - * @{ - */ -#define LL_RCC_SPDIFRX1_CLKSOURCE RCC_DCKCFGR2_SPDIFRXSEL /*!< SPDIFRX Clock source selection */ -/** - * @} - */ -#endif /* SPDIFRX */ - -#if defined(DSI) -/** @defgroup RCC_LL_EC_DSI Peripheral DSI get clock source - * @{ - */ -#define LL_RCC_DSI_CLKSOURCE RCC_DCKCFGR_DSISEL /*!< DSI Clock source selection */ -/** - * @} - */ -#endif /* DSI */ - -#if defined(LTDC) -/** @defgroup RCC_LL_EC_LTDC Peripheral LTDC get clock source - * @{ - */ -#define LL_RCC_LTDC_CLKSOURCE RCC_DCKCFGR_PLLSAIDIVR /*!< LTDC Clock source selection */ -/** - * @} - */ -#endif /* LTDC */ - - -/** @defgroup RCC_LL_EC_RTC_CLKSOURCE RTC clock source selection - * @{ - */ -#define LL_RCC_RTC_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RTC clock */ -#define LL_RCC_RTC_CLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */ -#define LL_RCC_RTC_CLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */ -#define LL_RCC_RTC_CLKSOURCE_HSE RCC_BDCR_RTCSEL /*!< HSE oscillator clock divided by HSE prescaler used as RTC clock */ -/** - * @} - */ - -#if defined(RCC_DCKCFGR_TIMPRE) -/** @defgroup RCC_LL_EC_TIM_CLKPRESCALER Timers clocks prescalers selection - * @{ - */ -#define LL_RCC_TIM_PRESCALER_TWICE 0x00000000U /*!< Timers clock to twice PCLK */ -#define LL_RCC_TIM_PRESCALER_FOUR_TIMES RCC_DCKCFGR_TIMPRE /*!< Timers clock to four time PCLK */ -/** - * @} - */ -#endif /* RCC_DCKCFGR_TIMPRE */ - -/** @defgroup RCC_LL_EC_PLLSOURCE PLL, PLLI2S and PLLSAI entry clock source - * @{ - */ -#define LL_RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI /*!< HSI16 clock selected as PLL entry clock source */ -#define LL_RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE /*!< HSE clock selected as PLL entry clock source */ -#if defined(RCC_PLLI2SCFGR_PLLI2SSRC) -#define LL_RCC_PLLI2SSOURCE_PIN (RCC_PLLI2SCFGR_PLLI2SSRC | 0x80U) /*!< I2S External pin input clock selected as PLLI2S entry clock source */ -#endif /* RCC_PLLI2SCFGR_PLLI2SSRC */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_PLLM_DIV PLL, PLLI2S and PLLSAI division factor - * @{ - */ -#define LL_RCC_PLLM_DIV_2 (RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 2 */ -#define LL_RCC_PLLM_DIV_3 (RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 3 */ -#define LL_RCC_PLLM_DIV_4 (RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 4 */ -#define LL_RCC_PLLM_DIV_5 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 5 */ -#define LL_RCC_PLLM_DIV_6 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 6 */ -#define LL_RCC_PLLM_DIV_7 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 7 */ -#define LL_RCC_PLLM_DIV_8 (RCC_PLLCFGR_PLLM_3) /*!< PLL, PLLI2S and PLLSAI division factor by 8 */ -#define LL_RCC_PLLM_DIV_9 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 9 */ -#define LL_RCC_PLLM_DIV_10 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 10 */ -#define LL_RCC_PLLM_DIV_11 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 11 */ -#define LL_RCC_PLLM_DIV_12 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 12 */ -#define LL_RCC_PLLM_DIV_13 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 13 */ -#define LL_RCC_PLLM_DIV_14 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 14 */ -#define LL_RCC_PLLM_DIV_15 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 15 */ -#define LL_RCC_PLLM_DIV_16 (RCC_PLLCFGR_PLLM_4) /*!< PLL, PLLI2S and PLLSAI division factor by 16 */ -#define LL_RCC_PLLM_DIV_17 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 17 */ -#define LL_RCC_PLLM_DIV_18 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 18 */ -#define LL_RCC_PLLM_DIV_19 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 19 */ -#define LL_RCC_PLLM_DIV_20 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 20 */ -#define LL_RCC_PLLM_DIV_21 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 21 */ -#define LL_RCC_PLLM_DIV_22 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 22 */ -#define LL_RCC_PLLM_DIV_23 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 23 */ -#define LL_RCC_PLLM_DIV_24 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3) /*!< PLL, PLLI2S and PLLSAI division factor by 24 */ -#define LL_RCC_PLLM_DIV_25 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 25 */ -#define LL_RCC_PLLM_DIV_26 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 26 */ -#define LL_RCC_PLLM_DIV_27 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 27 */ -#define LL_RCC_PLLM_DIV_28 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 28 */ -#define LL_RCC_PLLM_DIV_29 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 29 */ -#define LL_RCC_PLLM_DIV_30 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 30 */ -#define LL_RCC_PLLM_DIV_31 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 31 */ -#define LL_RCC_PLLM_DIV_32 (RCC_PLLCFGR_PLLM_5) /*!< PLL, PLLI2S and PLLSAI division factor by 32 */ -#define LL_RCC_PLLM_DIV_33 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 33 */ -#define LL_RCC_PLLM_DIV_34 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 34 */ -#define LL_RCC_PLLM_DIV_35 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 35 */ -#define LL_RCC_PLLM_DIV_36 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 36 */ -#define LL_RCC_PLLM_DIV_37 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 37 */ -#define LL_RCC_PLLM_DIV_38 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 38 */ -#define LL_RCC_PLLM_DIV_39 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 39 */ -#define LL_RCC_PLLM_DIV_40 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3) /*!< PLL, PLLI2S and PLLSAI division factor by 40 */ -#define LL_RCC_PLLM_DIV_41 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 41 */ -#define LL_RCC_PLLM_DIV_42 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 42 */ -#define LL_RCC_PLLM_DIV_43 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 43 */ -#define LL_RCC_PLLM_DIV_44 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 44 */ -#define LL_RCC_PLLM_DIV_45 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 45 */ -#define LL_RCC_PLLM_DIV_46 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 46 */ -#define LL_RCC_PLLM_DIV_47 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 47 */ -#define LL_RCC_PLLM_DIV_48 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4) /*!< PLL, PLLI2S and PLLSAI division factor by 48 */ -#define LL_RCC_PLLM_DIV_49 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 49 */ -#define LL_RCC_PLLM_DIV_50 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 50 */ -#define LL_RCC_PLLM_DIV_51 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 51 */ -#define LL_RCC_PLLM_DIV_52 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 52 */ -#define LL_RCC_PLLM_DIV_53 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 53 */ -#define LL_RCC_PLLM_DIV_54 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 54 */ -#define LL_RCC_PLLM_DIV_55 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 55 */ -#define LL_RCC_PLLM_DIV_56 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3) /*!< PLL, PLLI2S and PLLSAI division factor by 56 */ -#define LL_RCC_PLLM_DIV_57 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 57 */ -#define LL_RCC_PLLM_DIV_58 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 58 */ -#define LL_RCC_PLLM_DIV_59 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 59 */ -#define LL_RCC_PLLM_DIV_60 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 60 */ -#define LL_RCC_PLLM_DIV_61 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 61 */ -#define LL_RCC_PLLM_DIV_62 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 62 */ -#define LL_RCC_PLLM_DIV_63 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 63 */ -/** - * @} - */ - -#if defined(RCC_PLLCFGR_PLLR) -/** @defgroup RCC_LL_EC_PLLR_DIV PLL division factor (PLLR) - * @{ - */ -#define LL_RCC_PLLR_DIV_2 (RCC_PLLCFGR_PLLR_1) /*!< Main PLL division factor for PLLCLK (system clock) by 2 */ -#define LL_RCC_PLLR_DIV_3 (RCC_PLLCFGR_PLLR_1|RCC_PLLCFGR_PLLR_0) /*!< Main PLL division factor for PLLCLK (system clock) by 3 */ -#define LL_RCC_PLLR_DIV_4 (RCC_PLLCFGR_PLLR_2) /*!< Main PLL division factor for PLLCLK (system clock) by 4 */ -#define LL_RCC_PLLR_DIV_5 (RCC_PLLCFGR_PLLR_2|RCC_PLLCFGR_PLLR_0) /*!< Main PLL division factor for PLLCLK (system clock) by 5 */ -#define LL_RCC_PLLR_DIV_6 (RCC_PLLCFGR_PLLR_2|RCC_PLLCFGR_PLLR_1) /*!< Main PLL division factor for PLLCLK (system clock) by 6 */ -#define LL_RCC_PLLR_DIV_7 (RCC_PLLCFGR_PLLR) /*!< Main PLL division factor for PLLCLK (system clock) by 7 */ -/** - * @} - */ -#endif /* RCC_PLLCFGR_PLLR */ - -#if defined(RCC_DCKCFGR_PLLDIVR) -/** @defgroup RCC_LL_EC_PLLDIVR PLLDIVR division factor (PLLDIVR) - * @{ - */ -#define LL_RCC_PLLDIVR_DIV_1 (RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 1 */ -#define LL_RCC_PLLDIVR_DIV_2 (RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 2 */ -#define LL_RCC_PLLDIVR_DIV_3 (RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 3 */ -#define LL_RCC_PLLDIVR_DIV_4 (RCC_DCKCFGR_PLLDIVR_2) /*!< PLL division factor for PLLDIVR output by 4 */ -#define LL_RCC_PLLDIVR_DIV_5 (RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 5 */ -#define LL_RCC_PLLDIVR_DIV_6 (RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 6 */ -#define LL_RCC_PLLDIVR_DIV_7 (RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 7 */ -#define LL_RCC_PLLDIVR_DIV_8 (RCC_DCKCFGR_PLLDIVR_3) /*!< PLL division factor for PLLDIVR output by 8 */ -#define LL_RCC_PLLDIVR_DIV_9 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 9 */ -#define LL_RCC_PLLDIVR_DIV_10 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 10 */ -#define LL_RCC_PLLDIVR_DIV_11 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 11 */ -#define LL_RCC_PLLDIVR_DIV_12 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2) /*!< PLL division factor for PLLDIVR output by 12 */ -#define LL_RCC_PLLDIVR_DIV_13 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 13 */ -#define LL_RCC_PLLDIVR_DIV_14 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 14 */ -#define LL_RCC_PLLDIVR_DIV_15 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 15 */ -#define LL_RCC_PLLDIVR_DIV_16 (RCC_DCKCFGR_PLLDIVR_4) /*!< PLL division factor for PLLDIVR output by 16 */ -#define LL_RCC_PLLDIVR_DIV_17 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 17 */ -#define LL_RCC_PLLDIVR_DIV_18 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 18 */ -#define LL_RCC_PLLDIVR_DIV_19 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 19 */ -#define LL_RCC_PLLDIVR_DIV_20 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_2) /*!< PLL division factor for PLLDIVR output by 20 */ -#define LL_RCC_PLLDIVR_DIV_21 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 21 */ -#define LL_RCC_PLLDIVR_DIV_22 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 22 */ -#define LL_RCC_PLLDIVR_DIV_23 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 23 */ -#define LL_RCC_PLLDIVR_DIV_24 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3) /*!< PLL division factor for PLLDIVR output by 24 */ -#define LL_RCC_PLLDIVR_DIV_25 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 25 */ -#define LL_RCC_PLLDIVR_DIV_26 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 26 */ -#define LL_RCC_PLLDIVR_DIV_27 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 27 */ -#define LL_RCC_PLLDIVR_DIV_28 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2) /*!< PLL division factor for PLLDIVR output by 28 */ -#define LL_RCC_PLLDIVR_DIV_29 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 29 */ -#define LL_RCC_PLLDIVR_DIV_30 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 30 */ -#define LL_RCC_PLLDIVR_DIV_31 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 31 */ -/** - * @} - */ -#endif /* RCC_DCKCFGR_PLLDIVR */ - -/** @defgroup RCC_LL_EC_PLLP_DIV PLL division factor (PLLP) - * @{ - */ -#define LL_RCC_PLLP_DIV_2 0x00000000U /*!< Main PLL division factor for PLLP output by 2 */ -#define LL_RCC_PLLP_DIV_4 RCC_PLLCFGR_PLLP_0 /*!< Main PLL division factor for PLLP output by 4 */ -#define LL_RCC_PLLP_DIV_6 RCC_PLLCFGR_PLLP_1 /*!< Main PLL division factor for PLLP output by 6 */ -#define LL_RCC_PLLP_DIV_8 (RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< Main PLL division factor for PLLP output by 8 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_PLLQ_DIV PLL division factor (PLLQ) - * @{ - */ -#define LL_RCC_PLLQ_DIV_2 RCC_PLLCFGR_PLLQ_1 /*!< Main PLL division factor for PLLQ output by 2 */ -#define LL_RCC_PLLQ_DIV_3 (RCC_PLLCFGR_PLLQ_1|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 3 */ -#define LL_RCC_PLLQ_DIV_4 RCC_PLLCFGR_PLLQ_2 /*!< Main PLL division factor for PLLQ output by 4 */ -#define LL_RCC_PLLQ_DIV_5 (RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 5 */ -#define LL_RCC_PLLQ_DIV_6 (RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_1) /*!< Main PLL division factor for PLLQ output by 6 */ -#define LL_RCC_PLLQ_DIV_7 (RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_1|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 7 */ -#define LL_RCC_PLLQ_DIV_8 RCC_PLLCFGR_PLLQ_3 /*!< Main PLL division factor for PLLQ output by 8 */ -#define LL_RCC_PLLQ_DIV_9 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 9 */ -#define LL_RCC_PLLQ_DIV_10 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_1) /*!< Main PLL division factor for PLLQ output by 10 */ -#define LL_RCC_PLLQ_DIV_11 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_1|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 11 */ -#define LL_RCC_PLLQ_DIV_12 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_2) /*!< Main PLL division factor for PLLQ output by 12 */ -#define LL_RCC_PLLQ_DIV_13 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 13 */ -#define LL_RCC_PLLQ_DIV_14 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_1) /*!< Main PLL division factor for PLLQ output by 14 */ -#define LL_RCC_PLLQ_DIV_15 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_1|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 15 */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_PLL_SPRE_SEL PLL Spread Spectrum Selection - * @{ - */ -#define LL_RCC_SPREAD_SELECT_CENTER 0x00000000U /*!< PLL center spread spectrum selection */ -#define LL_RCC_SPREAD_SELECT_DOWN RCC_SSCGR_SPREADSEL /*!< PLL down spread spectrum selection */ -/** - * @} - */ - -#if defined(RCC_PLLI2S_SUPPORT) -/** @defgroup RCC_LL_EC_PLLI2SM PLLI2SM division factor (PLLI2SM) - * @{ - */ -#if defined(RCC_PLLI2SCFGR_PLLI2SM) -#define LL_RCC_PLLI2SM_DIV_2 (RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 2 */ -#define LL_RCC_PLLI2SM_DIV_3 (RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 3 */ -#define LL_RCC_PLLI2SM_DIV_4 (RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 4 */ -#define LL_RCC_PLLI2SM_DIV_5 (RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 5 */ -#define LL_RCC_PLLI2SM_DIV_6 (RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 6 */ -#define LL_RCC_PLLI2SM_DIV_7 (RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 7 */ -#define LL_RCC_PLLI2SM_DIV_8 (RCC_PLLI2SCFGR_PLLI2SM_3) /*!< PLLI2S division factor for PLLI2SM output by 8 */ -#define LL_RCC_PLLI2SM_DIV_9 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 9 */ -#define LL_RCC_PLLI2SM_DIV_10 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 10 */ -#define LL_RCC_PLLI2SM_DIV_11 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 11 */ -#define LL_RCC_PLLI2SM_DIV_12 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 12 */ -#define LL_RCC_PLLI2SM_DIV_13 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 13 */ -#define LL_RCC_PLLI2SM_DIV_14 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 14 */ -#define LL_RCC_PLLI2SM_DIV_15 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 15 */ -#define LL_RCC_PLLI2SM_DIV_16 (RCC_PLLI2SCFGR_PLLI2SM_4) /*!< PLLI2S division factor for PLLI2SM output by 16 */ -#define LL_RCC_PLLI2SM_DIV_17 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 17 */ -#define LL_RCC_PLLI2SM_DIV_18 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 18 */ -#define LL_RCC_PLLI2SM_DIV_19 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 19 */ -#define LL_RCC_PLLI2SM_DIV_20 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 20 */ -#define LL_RCC_PLLI2SM_DIV_21 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 21 */ -#define LL_RCC_PLLI2SM_DIV_22 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 22 */ -#define LL_RCC_PLLI2SM_DIV_23 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 23 */ -#define LL_RCC_PLLI2SM_DIV_24 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3) /*!< PLLI2S division factor for PLLI2SM output by 24 */ -#define LL_RCC_PLLI2SM_DIV_25 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 25 */ -#define LL_RCC_PLLI2SM_DIV_26 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 26 */ -#define LL_RCC_PLLI2SM_DIV_27 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 27 */ -#define LL_RCC_PLLI2SM_DIV_28 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 28 */ -#define LL_RCC_PLLI2SM_DIV_29 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 29 */ -#define LL_RCC_PLLI2SM_DIV_30 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 30 */ -#define LL_RCC_PLLI2SM_DIV_31 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 31 */ -#define LL_RCC_PLLI2SM_DIV_32 (RCC_PLLI2SCFGR_PLLI2SM_5) /*!< PLLI2S division factor for PLLI2SM output by 32 */ -#define LL_RCC_PLLI2SM_DIV_33 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 33 */ -#define LL_RCC_PLLI2SM_DIV_34 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 34 */ -#define LL_RCC_PLLI2SM_DIV_35 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 35 */ -#define LL_RCC_PLLI2SM_DIV_36 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 36 */ -#define LL_RCC_PLLI2SM_DIV_37 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 37 */ -#define LL_RCC_PLLI2SM_DIV_38 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 38 */ -#define LL_RCC_PLLI2SM_DIV_39 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 39 */ -#define LL_RCC_PLLI2SM_DIV_40 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3) /*!< PLLI2S division factor for PLLI2SM output by 40 */ -#define LL_RCC_PLLI2SM_DIV_41 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 41 */ -#define LL_RCC_PLLI2SM_DIV_42 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 42 */ -#define LL_RCC_PLLI2SM_DIV_43 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 43 */ -#define LL_RCC_PLLI2SM_DIV_44 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 44 */ -#define LL_RCC_PLLI2SM_DIV_45 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 45 */ -#define LL_RCC_PLLI2SM_DIV_46 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 46 */ -#define LL_RCC_PLLI2SM_DIV_47 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 47 */ -#define LL_RCC_PLLI2SM_DIV_48 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4) /*!< PLLI2S division factor for PLLI2SM output by 48 */ -#define LL_RCC_PLLI2SM_DIV_49 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 49 */ -#define LL_RCC_PLLI2SM_DIV_50 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 50 */ -#define LL_RCC_PLLI2SM_DIV_51 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 51 */ -#define LL_RCC_PLLI2SM_DIV_52 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 52 */ -#define LL_RCC_PLLI2SM_DIV_53 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 53 */ -#define LL_RCC_PLLI2SM_DIV_54 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 54 */ -#define LL_RCC_PLLI2SM_DIV_55 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 55 */ -#define LL_RCC_PLLI2SM_DIV_56 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3) /*!< PLLI2S division factor for PLLI2SM output by 56 */ -#define LL_RCC_PLLI2SM_DIV_57 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 57 */ -#define LL_RCC_PLLI2SM_DIV_58 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 58 */ -#define LL_RCC_PLLI2SM_DIV_59 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 59 */ -#define LL_RCC_PLLI2SM_DIV_60 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 60 */ -#define LL_RCC_PLLI2SM_DIV_61 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 61 */ -#define LL_RCC_PLLI2SM_DIV_62 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 62 */ -#define LL_RCC_PLLI2SM_DIV_63 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 63 */ -#else -#define LL_RCC_PLLI2SM_DIV_2 LL_RCC_PLLM_DIV_2 /*!< PLLI2S division factor for PLLI2SM output by 2 */ -#define LL_RCC_PLLI2SM_DIV_3 LL_RCC_PLLM_DIV_3 /*!< PLLI2S division factor for PLLI2SM output by 3 */ -#define LL_RCC_PLLI2SM_DIV_4 LL_RCC_PLLM_DIV_4 /*!< PLLI2S division factor for PLLI2SM output by 4 */ -#define LL_RCC_PLLI2SM_DIV_5 LL_RCC_PLLM_DIV_5 /*!< PLLI2S division factor for PLLI2SM output by 5 */ -#define LL_RCC_PLLI2SM_DIV_6 LL_RCC_PLLM_DIV_6 /*!< PLLI2S division factor for PLLI2SM output by 6 */ -#define LL_RCC_PLLI2SM_DIV_7 LL_RCC_PLLM_DIV_7 /*!< PLLI2S division factor for PLLI2SM output by 7 */ -#define LL_RCC_PLLI2SM_DIV_8 LL_RCC_PLLM_DIV_8 /*!< PLLI2S division factor for PLLI2SM output by 8 */ -#define LL_RCC_PLLI2SM_DIV_9 LL_RCC_PLLM_DIV_9 /*!< PLLI2S division factor for PLLI2SM output by 9 */ -#define LL_RCC_PLLI2SM_DIV_10 LL_RCC_PLLM_DIV_10 /*!< PLLI2S division factor for PLLI2SM output by 10 */ -#define LL_RCC_PLLI2SM_DIV_11 LL_RCC_PLLM_DIV_11 /*!< PLLI2S division factor for PLLI2SM output by 11 */ -#define LL_RCC_PLLI2SM_DIV_12 LL_RCC_PLLM_DIV_12 /*!< PLLI2S division factor for PLLI2SM output by 12 */ -#define LL_RCC_PLLI2SM_DIV_13 LL_RCC_PLLM_DIV_13 /*!< PLLI2S division factor for PLLI2SM output by 13 */ -#define LL_RCC_PLLI2SM_DIV_14 LL_RCC_PLLM_DIV_14 /*!< PLLI2S division factor for PLLI2SM output by 14 */ -#define LL_RCC_PLLI2SM_DIV_15 LL_RCC_PLLM_DIV_15 /*!< PLLI2S division factor for PLLI2SM output by 15 */ -#define LL_RCC_PLLI2SM_DIV_16 LL_RCC_PLLM_DIV_16 /*!< PLLI2S division factor for PLLI2SM output by 16 */ -#define LL_RCC_PLLI2SM_DIV_17 LL_RCC_PLLM_DIV_17 /*!< PLLI2S division factor for PLLI2SM output by 17 */ -#define LL_RCC_PLLI2SM_DIV_18 LL_RCC_PLLM_DIV_18 /*!< PLLI2S division factor for PLLI2SM output by 18 */ -#define LL_RCC_PLLI2SM_DIV_19 LL_RCC_PLLM_DIV_19 /*!< PLLI2S division factor for PLLI2SM output by 19 */ -#define LL_RCC_PLLI2SM_DIV_20 LL_RCC_PLLM_DIV_20 /*!< PLLI2S division factor for PLLI2SM output by 20 */ -#define LL_RCC_PLLI2SM_DIV_21 LL_RCC_PLLM_DIV_21 /*!< PLLI2S division factor for PLLI2SM output by 21 */ -#define LL_RCC_PLLI2SM_DIV_22 LL_RCC_PLLM_DIV_22 /*!< PLLI2S division factor for PLLI2SM output by 22 */ -#define LL_RCC_PLLI2SM_DIV_23 LL_RCC_PLLM_DIV_23 /*!< PLLI2S division factor for PLLI2SM output by 23 */ -#define LL_RCC_PLLI2SM_DIV_24 LL_RCC_PLLM_DIV_24 /*!< PLLI2S division factor for PLLI2SM output by 24 */ -#define LL_RCC_PLLI2SM_DIV_25 LL_RCC_PLLM_DIV_25 /*!< PLLI2S division factor for PLLI2SM output by 25 */ -#define LL_RCC_PLLI2SM_DIV_26 LL_RCC_PLLM_DIV_26 /*!< PLLI2S division factor for PLLI2SM output by 26 */ -#define LL_RCC_PLLI2SM_DIV_27 LL_RCC_PLLM_DIV_27 /*!< PLLI2S division factor for PLLI2SM output by 27 */ -#define LL_RCC_PLLI2SM_DIV_28 LL_RCC_PLLM_DIV_28 /*!< PLLI2S division factor for PLLI2SM output by 28 */ -#define LL_RCC_PLLI2SM_DIV_29 LL_RCC_PLLM_DIV_29 /*!< PLLI2S division factor for PLLI2SM output by 29 */ -#define LL_RCC_PLLI2SM_DIV_30 LL_RCC_PLLM_DIV_30 /*!< PLLI2S division factor for PLLI2SM output by 30 */ -#define LL_RCC_PLLI2SM_DIV_31 LL_RCC_PLLM_DIV_31 /*!< PLLI2S division factor for PLLI2SM output by 31 */ -#define LL_RCC_PLLI2SM_DIV_32 LL_RCC_PLLM_DIV_32 /*!< PLLI2S division factor for PLLI2SM output by 32 */ -#define LL_RCC_PLLI2SM_DIV_33 LL_RCC_PLLM_DIV_33 /*!< PLLI2S division factor for PLLI2SM output by 33 */ -#define LL_RCC_PLLI2SM_DIV_34 LL_RCC_PLLM_DIV_34 /*!< PLLI2S division factor for PLLI2SM output by 34 */ -#define LL_RCC_PLLI2SM_DIV_35 LL_RCC_PLLM_DIV_35 /*!< PLLI2S division factor for PLLI2SM output by 35 */ -#define LL_RCC_PLLI2SM_DIV_36 LL_RCC_PLLM_DIV_36 /*!< PLLI2S division factor for PLLI2SM output by 36 */ -#define LL_RCC_PLLI2SM_DIV_37 LL_RCC_PLLM_DIV_37 /*!< PLLI2S division factor for PLLI2SM output by 37 */ -#define LL_RCC_PLLI2SM_DIV_38 LL_RCC_PLLM_DIV_38 /*!< PLLI2S division factor for PLLI2SM output by 38 */ -#define LL_RCC_PLLI2SM_DIV_39 LL_RCC_PLLM_DIV_39 /*!< PLLI2S division factor for PLLI2SM output by 39 */ -#define LL_RCC_PLLI2SM_DIV_40 LL_RCC_PLLM_DIV_40 /*!< PLLI2S division factor for PLLI2SM output by 40 */ -#define LL_RCC_PLLI2SM_DIV_41 LL_RCC_PLLM_DIV_41 /*!< PLLI2S division factor for PLLI2SM output by 41 */ -#define LL_RCC_PLLI2SM_DIV_42 LL_RCC_PLLM_DIV_42 /*!< PLLI2S division factor for PLLI2SM output by 42 */ -#define LL_RCC_PLLI2SM_DIV_43 LL_RCC_PLLM_DIV_43 /*!< PLLI2S division factor for PLLI2SM output by 43 */ -#define LL_RCC_PLLI2SM_DIV_44 LL_RCC_PLLM_DIV_44 /*!< PLLI2S division factor for PLLI2SM output by 44 */ -#define LL_RCC_PLLI2SM_DIV_45 LL_RCC_PLLM_DIV_45 /*!< PLLI2S division factor for PLLI2SM output by 45 */ -#define LL_RCC_PLLI2SM_DIV_46 LL_RCC_PLLM_DIV_46 /*!< PLLI2S division factor for PLLI2SM output by 46 */ -#define LL_RCC_PLLI2SM_DIV_47 LL_RCC_PLLM_DIV_47 /*!< PLLI2S division factor for PLLI2SM output by 47 */ -#define LL_RCC_PLLI2SM_DIV_48 LL_RCC_PLLM_DIV_48 /*!< PLLI2S division factor for PLLI2SM output by 48 */ -#define LL_RCC_PLLI2SM_DIV_49 LL_RCC_PLLM_DIV_49 /*!< PLLI2S division factor for PLLI2SM output by 49 */ -#define LL_RCC_PLLI2SM_DIV_50 LL_RCC_PLLM_DIV_50 /*!< PLLI2S division factor for PLLI2SM output by 50 */ -#define LL_RCC_PLLI2SM_DIV_51 LL_RCC_PLLM_DIV_51 /*!< PLLI2S division factor for PLLI2SM output by 51 */ -#define LL_RCC_PLLI2SM_DIV_52 LL_RCC_PLLM_DIV_52 /*!< PLLI2S division factor for PLLI2SM output by 52 */ -#define LL_RCC_PLLI2SM_DIV_53 LL_RCC_PLLM_DIV_53 /*!< PLLI2S division factor for PLLI2SM output by 53 */ -#define LL_RCC_PLLI2SM_DIV_54 LL_RCC_PLLM_DIV_54 /*!< PLLI2S division factor for PLLI2SM output by 54 */ -#define LL_RCC_PLLI2SM_DIV_55 LL_RCC_PLLM_DIV_55 /*!< PLLI2S division factor for PLLI2SM output by 55 */ -#define LL_RCC_PLLI2SM_DIV_56 LL_RCC_PLLM_DIV_56 /*!< PLLI2S division factor for PLLI2SM output by 56 */ -#define LL_RCC_PLLI2SM_DIV_57 LL_RCC_PLLM_DIV_57 /*!< PLLI2S division factor for PLLI2SM output by 57 */ -#define LL_RCC_PLLI2SM_DIV_58 LL_RCC_PLLM_DIV_58 /*!< PLLI2S division factor for PLLI2SM output by 58 */ -#define LL_RCC_PLLI2SM_DIV_59 LL_RCC_PLLM_DIV_59 /*!< PLLI2S division factor for PLLI2SM output by 59 */ -#define LL_RCC_PLLI2SM_DIV_60 LL_RCC_PLLM_DIV_60 /*!< PLLI2S division factor for PLLI2SM output by 60 */ -#define LL_RCC_PLLI2SM_DIV_61 LL_RCC_PLLM_DIV_61 /*!< PLLI2S division factor for PLLI2SM output by 61 */ -#define LL_RCC_PLLI2SM_DIV_62 LL_RCC_PLLM_DIV_62 /*!< PLLI2S division factor for PLLI2SM output by 62 */ -#define LL_RCC_PLLI2SM_DIV_63 LL_RCC_PLLM_DIV_63 /*!< PLLI2S division factor for PLLI2SM output by 63 */ -#endif /* RCC_PLLI2SCFGR_PLLI2SM */ -/** - * @} - */ - -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) -/** @defgroup RCC_LL_EC_PLLI2SQ PLLI2SQ division factor (PLLI2SQ) - * @{ - */ -#define LL_RCC_PLLI2SQ_DIV_2 RCC_PLLI2SCFGR_PLLI2SQ_1 /*!< PLLI2S division factor for PLLI2SQ output by 2 */ -#define LL_RCC_PLLI2SQ_DIV_3 (RCC_PLLI2SCFGR_PLLI2SQ_1 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 3 */ -#define LL_RCC_PLLI2SQ_DIV_4 RCC_PLLI2SCFGR_PLLI2SQ_2 /*!< PLLI2S division factor for PLLI2SQ output by 4 */ -#define LL_RCC_PLLI2SQ_DIV_5 (RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 5 */ -#define LL_RCC_PLLI2SQ_DIV_6 (RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_1) /*!< PLLI2S division factor for PLLI2SQ output by 6 */ -#define LL_RCC_PLLI2SQ_DIV_7 (RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_1 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 7 */ -#define LL_RCC_PLLI2SQ_DIV_8 RCC_PLLI2SCFGR_PLLI2SQ_3 /*!< PLLI2S division factor for PLLI2SQ output by 8 */ -#define LL_RCC_PLLI2SQ_DIV_9 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 9 */ -#define LL_RCC_PLLI2SQ_DIV_10 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_1) /*!< PLLI2S division factor for PLLI2SQ output by 10 */ -#define LL_RCC_PLLI2SQ_DIV_11 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_1 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 11 */ -#define LL_RCC_PLLI2SQ_DIV_12 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_2) /*!< PLLI2S division factor for PLLI2SQ output by 12 */ -#define LL_RCC_PLLI2SQ_DIV_13 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 13 */ -#define LL_RCC_PLLI2SQ_DIV_14 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_1) /*!< PLLI2S division factor for PLLI2SQ output by 14 */ -#define LL_RCC_PLLI2SQ_DIV_15 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_1 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 15 */ -/** - * @} - */ -#endif /* RCC_PLLI2SCFGR_PLLI2SQ */ - -#if defined(RCC_DCKCFGR_PLLI2SDIVQ) -/** @defgroup RCC_LL_EC_PLLI2SDIVQ PLLI2SDIVQ division factor (PLLI2SDIVQ) - * @{ - */ -#define LL_RCC_PLLI2SDIVQ_DIV_1 0x00000000U /*!< PLLI2S division factor for PLLI2SDIVQ output by 1 */ -#define LL_RCC_PLLI2SDIVQ_DIV_2 RCC_DCKCFGR_PLLI2SDIVQ_0 /*!< PLLI2S division factor for PLLI2SDIVQ output by 2 */ -#define LL_RCC_PLLI2SDIVQ_DIV_3 RCC_DCKCFGR_PLLI2SDIVQ_1 /*!< PLLI2S division factor for PLLI2SDIVQ output by 3 */ -#define LL_RCC_PLLI2SDIVQ_DIV_4 (RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 4 */ -#define LL_RCC_PLLI2SDIVQ_DIV_5 RCC_DCKCFGR_PLLI2SDIVQ_2 /*!< PLLI2S division factor for PLLI2SDIVQ output by 5 */ -#define LL_RCC_PLLI2SDIVQ_DIV_6 (RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 6 */ -#define LL_RCC_PLLI2SDIVQ_DIV_7 (RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 7 */ -#define LL_RCC_PLLI2SDIVQ_DIV_8 (RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 8 */ -#define LL_RCC_PLLI2SDIVQ_DIV_9 RCC_DCKCFGR_PLLI2SDIVQ_3 /*!< PLLI2S division factor for PLLI2SDIVQ output by 9 */ -#define LL_RCC_PLLI2SDIVQ_DIV_10 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 10 */ -#define LL_RCC_PLLI2SDIVQ_DIV_11 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 11 */ -#define LL_RCC_PLLI2SDIVQ_DIV_12 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 12 */ -#define LL_RCC_PLLI2SDIVQ_DIV_13 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2) /*!< PLLI2S division factor for PLLI2SDIVQ output by 13 */ -#define LL_RCC_PLLI2SDIVQ_DIV_14 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 14 */ -#define LL_RCC_PLLI2SDIVQ_DIV_15 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 15 */ -#define LL_RCC_PLLI2SDIVQ_DIV_16 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 16 */ -#define LL_RCC_PLLI2SDIVQ_DIV_17 RCC_DCKCFGR_PLLI2SDIVQ_4 /*!< PLLI2S division factor for PLLI2SDIVQ output by 17 */ -#define LL_RCC_PLLI2SDIVQ_DIV_18 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 18 */ -#define LL_RCC_PLLI2SDIVQ_DIV_19 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 19 */ -#define LL_RCC_PLLI2SDIVQ_DIV_20 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 20 */ -#define LL_RCC_PLLI2SDIVQ_DIV_21 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_2) /*!< PLLI2S division factor for PLLI2SDIVQ output by 21 */ -#define LL_RCC_PLLI2SDIVQ_DIV_22 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 22 */ -#define LL_RCC_PLLI2SDIVQ_DIV_23 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 23 */ -#define LL_RCC_PLLI2SDIVQ_DIV_24 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 24 */ -#define LL_RCC_PLLI2SDIVQ_DIV_25 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3) /*!< PLLI2S division factor for PLLI2SDIVQ output by 25 */ -#define LL_RCC_PLLI2SDIVQ_DIV_26 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 26 */ -#define LL_RCC_PLLI2SDIVQ_DIV_27 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 27 */ -#define LL_RCC_PLLI2SDIVQ_DIV_28 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 28 */ -#define LL_RCC_PLLI2SDIVQ_DIV_29 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2) /*!< PLLI2S division factor for PLLI2SDIVQ output by 29 */ -#define LL_RCC_PLLI2SDIVQ_DIV_30 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 30 */ -#define LL_RCC_PLLI2SDIVQ_DIV_31 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 31 */ -#define LL_RCC_PLLI2SDIVQ_DIV_32 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 32 */ -/** - * @} - */ -#endif /* RCC_DCKCFGR_PLLI2SDIVQ */ - -#if defined(RCC_DCKCFGR_PLLI2SDIVR) -/** @defgroup RCC_LL_EC_PLLI2SDIVR PLLI2SDIVR division factor (PLLI2SDIVR) - * @{ - */ -#define LL_RCC_PLLI2SDIVR_DIV_1 (RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 1 */ -#define LL_RCC_PLLI2SDIVR_DIV_2 (RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 2 */ -#define LL_RCC_PLLI2SDIVR_DIV_3 (RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 3 */ -#define LL_RCC_PLLI2SDIVR_DIV_4 (RCC_DCKCFGR_PLLI2SDIVR_2) /*!< PLLI2S division factor for PLLI2SDIVR output by 4 */ -#define LL_RCC_PLLI2SDIVR_DIV_5 (RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 5 */ -#define LL_RCC_PLLI2SDIVR_DIV_6 (RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 6 */ -#define LL_RCC_PLLI2SDIVR_DIV_7 (RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 7 */ -#define LL_RCC_PLLI2SDIVR_DIV_8 (RCC_DCKCFGR_PLLI2SDIVR_3) /*!< PLLI2S division factor for PLLI2SDIVR output by 8 */ -#define LL_RCC_PLLI2SDIVR_DIV_9 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 9 */ -#define LL_RCC_PLLI2SDIVR_DIV_10 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 10 */ -#define LL_RCC_PLLI2SDIVR_DIV_11 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 11 */ -#define LL_RCC_PLLI2SDIVR_DIV_12 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2) /*!< PLLI2S division factor for PLLI2SDIVR output by 12 */ -#define LL_RCC_PLLI2SDIVR_DIV_13 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 13 */ -#define LL_RCC_PLLI2SDIVR_DIV_14 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 14 */ -#define LL_RCC_PLLI2SDIVR_DIV_15 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 15 */ -#define LL_RCC_PLLI2SDIVR_DIV_16 (RCC_DCKCFGR_PLLI2SDIVR_4) /*!< PLLI2S division factor for PLLI2SDIVR output by 16 */ -#define LL_RCC_PLLI2SDIVR_DIV_17 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 17 */ -#define LL_RCC_PLLI2SDIVR_DIV_18 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 18 */ -#define LL_RCC_PLLI2SDIVR_DIV_19 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 19 */ -#define LL_RCC_PLLI2SDIVR_DIV_20 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_2) /*!< PLLI2S division factor for PLLI2SDIVR output by 20 */ -#define LL_RCC_PLLI2SDIVR_DIV_21 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 21 */ -#define LL_RCC_PLLI2SDIVR_DIV_22 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 22 */ -#define LL_RCC_PLLI2SDIVR_DIV_23 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 23 */ -#define LL_RCC_PLLI2SDIVR_DIV_24 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3) /*!< PLLI2S division factor for PLLI2SDIVR output by 24 */ -#define LL_RCC_PLLI2SDIVR_DIV_25 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 25 */ -#define LL_RCC_PLLI2SDIVR_DIV_26 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 26 */ -#define LL_RCC_PLLI2SDIVR_DIV_27 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 27 */ -#define LL_RCC_PLLI2SDIVR_DIV_28 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2) /*!< PLLI2S division factor for PLLI2SDIVR output by 28 */ -#define LL_RCC_PLLI2SDIVR_DIV_29 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 29 */ -#define LL_RCC_PLLI2SDIVR_DIV_30 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 30 */ -#define LL_RCC_PLLI2SDIVR_DIV_31 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 31 */ -/** - * @} - */ -#endif /* RCC_DCKCFGR_PLLI2SDIVR */ - -/** @defgroup RCC_LL_EC_PLLI2SR PLLI2SR division factor (PLLI2SR) - * @{ - */ -#define LL_RCC_PLLI2SR_DIV_2 RCC_PLLI2SCFGR_PLLI2SR_1 /*!< PLLI2S division factor for PLLI2SR output by 2 */ -#define LL_RCC_PLLI2SR_DIV_3 (RCC_PLLI2SCFGR_PLLI2SR_1 | RCC_PLLI2SCFGR_PLLI2SR_0) /*!< PLLI2S division factor for PLLI2SR output by 3 */ -#define LL_RCC_PLLI2SR_DIV_4 RCC_PLLI2SCFGR_PLLI2SR_2 /*!< PLLI2S division factor for PLLI2SR output by 4 */ -#define LL_RCC_PLLI2SR_DIV_5 (RCC_PLLI2SCFGR_PLLI2SR_2 | RCC_PLLI2SCFGR_PLLI2SR_0) /*!< PLLI2S division factor for PLLI2SR output by 5 */ -#define LL_RCC_PLLI2SR_DIV_6 (RCC_PLLI2SCFGR_PLLI2SR_2 | RCC_PLLI2SCFGR_PLLI2SR_1) /*!< PLLI2S division factor for PLLI2SR output by 6 */ -#define LL_RCC_PLLI2SR_DIV_7 (RCC_PLLI2SCFGR_PLLI2SR_2 | RCC_PLLI2SCFGR_PLLI2SR_1 | RCC_PLLI2SCFGR_PLLI2SR_0) /*!< PLLI2S division factor for PLLI2SR output by 7 */ -/** - * @} - */ - -#if defined(RCC_PLLI2SCFGR_PLLI2SP) -/** @defgroup RCC_LL_EC_PLLI2SP PLLI2SP division factor (PLLI2SP) - * @{ - */ -#define LL_RCC_PLLI2SP_DIV_2 0x00000000U /*!< PLLI2S division factor for PLLI2SP output by 2 */ -#define LL_RCC_PLLI2SP_DIV_4 RCC_PLLI2SCFGR_PLLI2SP_0 /*!< PLLI2S division factor for PLLI2SP output by 4 */ -#define LL_RCC_PLLI2SP_DIV_6 RCC_PLLI2SCFGR_PLLI2SP_1 /*!< PLLI2S division factor for PLLI2SP output by 6 */ -#define LL_RCC_PLLI2SP_DIV_8 (RCC_PLLI2SCFGR_PLLI2SP_1 | RCC_PLLI2SCFGR_PLLI2SP_0) /*!< PLLI2S division factor for PLLI2SP output by 8 */ -/** - * @} - */ -#endif /* RCC_PLLI2SCFGR_PLLI2SP */ -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** @defgroup RCC_LL_EC_PLLSAIM PLLSAIM division factor (PLLSAIM or PLLM) - * @{ - */ -#if defined(RCC_PLLSAICFGR_PLLSAIM) -#define LL_RCC_PLLSAIM_DIV_2 (RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 2 */ -#define LL_RCC_PLLSAIM_DIV_3 (RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 3 */ -#define LL_RCC_PLLSAIM_DIV_4 (RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 4 */ -#define LL_RCC_PLLSAIM_DIV_5 (RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 5 */ -#define LL_RCC_PLLSAIM_DIV_6 (RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 6 */ -#define LL_RCC_PLLSAIM_DIV_7 (RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 7 */ -#define LL_RCC_PLLSAIM_DIV_8 (RCC_PLLSAICFGR_PLLSAIM_3) /*!< PLLSAI division factor for PLLSAIM output by 8 */ -#define LL_RCC_PLLSAIM_DIV_9 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 9 */ -#define LL_RCC_PLLSAIM_DIV_10 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 10 */ -#define LL_RCC_PLLSAIM_DIV_11 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 11 */ -#define LL_RCC_PLLSAIM_DIV_12 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 12 */ -#define LL_RCC_PLLSAIM_DIV_13 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 13 */ -#define LL_RCC_PLLSAIM_DIV_14 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 14 */ -#define LL_RCC_PLLSAIM_DIV_15 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 15 */ -#define LL_RCC_PLLSAIM_DIV_16 (RCC_PLLSAICFGR_PLLSAIM_4) /*!< PLLSAI division factor for PLLSAIM output by 16 */ -#define LL_RCC_PLLSAIM_DIV_17 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 17 */ -#define LL_RCC_PLLSAIM_DIV_18 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 18 */ -#define LL_RCC_PLLSAIM_DIV_19 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 19 */ -#define LL_RCC_PLLSAIM_DIV_20 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 20 */ -#define LL_RCC_PLLSAIM_DIV_21 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 21 */ -#define LL_RCC_PLLSAIM_DIV_22 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 22 */ -#define LL_RCC_PLLSAIM_DIV_23 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 23 */ -#define LL_RCC_PLLSAIM_DIV_24 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3) /*!< PLLSAI division factor for PLLSAIM output by 24 */ -#define LL_RCC_PLLSAIM_DIV_25 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 25 */ -#define LL_RCC_PLLSAIM_DIV_26 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 26 */ -#define LL_RCC_PLLSAIM_DIV_27 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 27 */ -#define LL_RCC_PLLSAIM_DIV_28 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 28 */ -#define LL_RCC_PLLSAIM_DIV_29 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 29 */ -#define LL_RCC_PLLSAIM_DIV_30 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 30 */ -#define LL_RCC_PLLSAIM_DIV_31 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 31 */ -#define LL_RCC_PLLSAIM_DIV_32 (RCC_PLLSAICFGR_PLLSAIM_5) /*!< PLLSAI division factor for PLLSAIM output by 32 */ -#define LL_RCC_PLLSAIM_DIV_33 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 33 */ -#define LL_RCC_PLLSAIM_DIV_34 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 34 */ -#define LL_RCC_PLLSAIM_DIV_35 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 35 */ -#define LL_RCC_PLLSAIM_DIV_36 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 36 */ -#define LL_RCC_PLLSAIM_DIV_37 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 37 */ -#define LL_RCC_PLLSAIM_DIV_38 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 38 */ -#define LL_RCC_PLLSAIM_DIV_39 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 39 */ -#define LL_RCC_PLLSAIM_DIV_40 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3) /*!< PLLSAI division factor for PLLSAIM output by 40 */ -#define LL_RCC_PLLSAIM_DIV_41 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 41 */ -#define LL_RCC_PLLSAIM_DIV_42 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 42 */ -#define LL_RCC_PLLSAIM_DIV_43 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 43 */ -#define LL_RCC_PLLSAIM_DIV_44 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 44 */ -#define LL_RCC_PLLSAIM_DIV_45 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 45 */ -#define LL_RCC_PLLSAIM_DIV_46 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 46 */ -#define LL_RCC_PLLSAIM_DIV_47 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 47 */ -#define LL_RCC_PLLSAIM_DIV_48 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4) /*!< PLLSAI division factor for PLLSAIM output by 48 */ -#define LL_RCC_PLLSAIM_DIV_49 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 49 */ -#define LL_RCC_PLLSAIM_DIV_50 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 50 */ -#define LL_RCC_PLLSAIM_DIV_51 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 51 */ -#define LL_RCC_PLLSAIM_DIV_52 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 52 */ -#define LL_RCC_PLLSAIM_DIV_53 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 53 */ -#define LL_RCC_PLLSAIM_DIV_54 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 54 */ -#define LL_RCC_PLLSAIM_DIV_55 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 55 */ -#define LL_RCC_PLLSAIM_DIV_56 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3) /*!< PLLSAI division factor for PLLSAIM output by 56 */ -#define LL_RCC_PLLSAIM_DIV_57 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 57 */ -#define LL_RCC_PLLSAIM_DIV_58 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 58 */ -#define LL_RCC_PLLSAIM_DIV_59 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 59 */ -#define LL_RCC_PLLSAIM_DIV_60 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 60 */ -#define LL_RCC_PLLSAIM_DIV_61 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 61 */ -#define LL_RCC_PLLSAIM_DIV_62 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 62 */ -#define LL_RCC_PLLSAIM_DIV_63 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 63 */ -#else -#define LL_RCC_PLLSAIM_DIV_2 LL_RCC_PLLM_DIV_2 /*!< PLLSAI division factor for PLLSAIM output by 2 */ -#define LL_RCC_PLLSAIM_DIV_3 LL_RCC_PLLM_DIV_3 /*!< PLLSAI division factor for PLLSAIM output by 3 */ -#define LL_RCC_PLLSAIM_DIV_4 LL_RCC_PLLM_DIV_4 /*!< PLLSAI division factor for PLLSAIM output by 4 */ -#define LL_RCC_PLLSAIM_DIV_5 LL_RCC_PLLM_DIV_5 /*!< PLLSAI division factor for PLLSAIM output by 5 */ -#define LL_RCC_PLLSAIM_DIV_6 LL_RCC_PLLM_DIV_6 /*!< PLLSAI division factor for PLLSAIM output by 6 */ -#define LL_RCC_PLLSAIM_DIV_7 LL_RCC_PLLM_DIV_7 /*!< PLLSAI division factor for PLLSAIM output by 7 */ -#define LL_RCC_PLLSAIM_DIV_8 LL_RCC_PLLM_DIV_8 /*!< PLLSAI division factor for PLLSAIM output by 8 */ -#define LL_RCC_PLLSAIM_DIV_9 LL_RCC_PLLM_DIV_9 /*!< PLLSAI division factor for PLLSAIM output by 9 */ -#define LL_RCC_PLLSAIM_DIV_10 LL_RCC_PLLM_DIV_10 /*!< PLLSAI division factor for PLLSAIM output by 10 */ -#define LL_RCC_PLLSAIM_DIV_11 LL_RCC_PLLM_DIV_11 /*!< PLLSAI division factor for PLLSAIM output by 11 */ -#define LL_RCC_PLLSAIM_DIV_12 LL_RCC_PLLM_DIV_12 /*!< PLLSAI division factor for PLLSAIM output by 12 */ -#define LL_RCC_PLLSAIM_DIV_13 LL_RCC_PLLM_DIV_13 /*!< PLLSAI division factor for PLLSAIM output by 13 */ -#define LL_RCC_PLLSAIM_DIV_14 LL_RCC_PLLM_DIV_14 /*!< PLLSAI division factor for PLLSAIM output by 14 */ -#define LL_RCC_PLLSAIM_DIV_15 LL_RCC_PLLM_DIV_15 /*!< PLLSAI division factor for PLLSAIM output by 15 */ -#define LL_RCC_PLLSAIM_DIV_16 LL_RCC_PLLM_DIV_16 /*!< PLLSAI division factor for PLLSAIM output by 16 */ -#define LL_RCC_PLLSAIM_DIV_17 LL_RCC_PLLM_DIV_17 /*!< PLLSAI division factor for PLLSAIM output by 17 */ -#define LL_RCC_PLLSAIM_DIV_18 LL_RCC_PLLM_DIV_18 /*!< PLLSAI division factor for PLLSAIM output by 18 */ -#define LL_RCC_PLLSAIM_DIV_19 LL_RCC_PLLM_DIV_19 /*!< PLLSAI division factor for PLLSAIM output by 19 */ -#define LL_RCC_PLLSAIM_DIV_20 LL_RCC_PLLM_DIV_20 /*!< PLLSAI division factor for PLLSAIM output by 20 */ -#define LL_RCC_PLLSAIM_DIV_21 LL_RCC_PLLM_DIV_21 /*!< PLLSAI division factor for PLLSAIM output by 21 */ -#define LL_RCC_PLLSAIM_DIV_22 LL_RCC_PLLM_DIV_22 /*!< PLLSAI division factor for PLLSAIM output by 22 */ -#define LL_RCC_PLLSAIM_DIV_23 LL_RCC_PLLM_DIV_23 /*!< PLLSAI division factor for PLLSAIM output by 23 */ -#define LL_RCC_PLLSAIM_DIV_24 LL_RCC_PLLM_DIV_24 /*!< PLLSAI division factor for PLLSAIM output by 24 */ -#define LL_RCC_PLLSAIM_DIV_25 LL_RCC_PLLM_DIV_25 /*!< PLLSAI division factor for PLLSAIM output by 25 */ -#define LL_RCC_PLLSAIM_DIV_26 LL_RCC_PLLM_DIV_26 /*!< PLLSAI division factor for PLLSAIM output by 26 */ -#define LL_RCC_PLLSAIM_DIV_27 LL_RCC_PLLM_DIV_27 /*!< PLLSAI division factor for PLLSAIM output by 27 */ -#define LL_RCC_PLLSAIM_DIV_28 LL_RCC_PLLM_DIV_28 /*!< PLLSAI division factor for PLLSAIM output by 28 */ -#define LL_RCC_PLLSAIM_DIV_29 LL_RCC_PLLM_DIV_29 /*!< PLLSAI division factor for PLLSAIM output by 29 */ -#define LL_RCC_PLLSAIM_DIV_30 LL_RCC_PLLM_DIV_30 /*!< PLLSAI division factor for PLLSAIM output by 30 */ -#define LL_RCC_PLLSAIM_DIV_31 LL_RCC_PLLM_DIV_31 /*!< PLLSAI division factor for PLLSAIM output by 31 */ -#define LL_RCC_PLLSAIM_DIV_32 LL_RCC_PLLM_DIV_32 /*!< PLLSAI division factor for PLLSAIM output by 32 */ -#define LL_RCC_PLLSAIM_DIV_33 LL_RCC_PLLM_DIV_33 /*!< PLLSAI division factor for PLLSAIM output by 33 */ -#define LL_RCC_PLLSAIM_DIV_34 LL_RCC_PLLM_DIV_34 /*!< PLLSAI division factor for PLLSAIM output by 34 */ -#define LL_RCC_PLLSAIM_DIV_35 LL_RCC_PLLM_DIV_35 /*!< PLLSAI division factor for PLLSAIM output by 35 */ -#define LL_RCC_PLLSAIM_DIV_36 LL_RCC_PLLM_DIV_36 /*!< PLLSAI division factor for PLLSAIM output by 36 */ -#define LL_RCC_PLLSAIM_DIV_37 LL_RCC_PLLM_DIV_37 /*!< PLLSAI division factor for PLLSAIM output by 37 */ -#define LL_RCC_PLLSAIM_DIV_38 LL_RCC_PLLM_DIV_38 /*!< PLLSAI division factor for PLLSAIM output by 38 */ -#define LL_RCC_PLLSAIM_DIV_39 LL_RCC_PLLM_DIV_39 /*!< PLLSAI division factor for PLLSAIM output by 39 */ -#define LL_RCC_PLLSAIM_DIV_40 LL_RCC_PLLM_DIV_40 /*!< PLLSAI division factor for PLLSAIM output by 40 */ -#define LL_RCC_PLLSAIM_DIV_41 LL_RCC_PLLM_DIV_41 /*!< PLLSAI division factor for PLLSAIM output by 41 */ -#define LL_RCC_PLLSAIM_DIV_42 LL_RCC_PLLM_DIV_42 /*!< PLLSAI division factor for PLLSAIM output by 42 */ -#define LL_RCC_PLLSAIM_DIV_43 LL_RCC_PLLM_DIV_43 /*!< PLLSAI division factor for PLLSAIM output by 43 */ -#define LL_RCC_PLLSAIM_DIV_44 LL_RCC_PLLM_DIV_44 /*!< PLLSAI division factor for PLLSAIM output by 44 */ -#define LL_RCC_PLLSAIM_DIV_45 LL_RCC_PLLM_DIV_45 /*!< PLLSAI division factor for PLLSAIM output by 45 */ -#define LL_RCC_PLLSAIM_DIV_46 LL_RCC_PLLM_DIV_46 /*!< PLLSAI division factor for PLLSAIM output by 46 */ -#define LL_RCC_PLLSAIM_DIV_47 LL_RCC_PLLM_DIV_47 /*!< PLLSAI division factor for PLLSAIM output by 47 */ -#define LL_RCC_PLLSAIM_DIV_48 LL_RCC_PLLM_DIV_48 /*!< PLLSAI division factor for PLLSAIM output by 48 */ -#define LL_RCC_PLLSAIM_DIV_49 LL_RCC_PLLM_DIV_49 /*!< PLLSAI division factor for PLLSAIM output by 49 */ -#define LL_RCC_PLLSAIM_DIV_50 LL_RCC_PLLM_DIV_50 /*!< PLLSAI division factor for PLLSAIM output by 50 */ -#define LL_RCC_PLLSAIM_DIV_51 LL_RCC_PLLM_DIV_51 /*!< PLLSAI division factor for PLLSAIM output by 51 */ -#define LL_RCC_PLLSAIM_DIV_52 LL_RCC_PLLM_DIV_52 /*!< PLLSAI division factor for PLLSAIM output by 52 */ -#define LL_RCC_PLLSAIM_DIV_53 LL_RCC_PLLM_DIV_53 /*!< PLLSAI division factor for PLLSAIM output by 53 */ -#define LL_RCC_PLLSAIM_DIV_54 LL_RCC_PLLM_DIV_54 /*!< PLLSAI division factor for PLLSAIM output by 54 */ -#define LL_RCC_PLLSAIM_DIV_55 LL_RCC_PLLM_DIV_55 /*!< PLLSAI division factor for PLLSAIM output by 55 */ -#define LL_RCC_PLLSAIM_DIV_56 LL_RCC_PLLM_DIV_56 /*!< PLLSAI division factor for PLLSAIM output by 56 */ -#define LL_RCC_PLLSAIM_DIV_57 LL_RCC_PLLM_DIV_57 /*!< PLLSAI division factor for PLLSAIM output by 57 */ -#define LL_RCC_PLLSAIM_DIV_58 LL_RCC_PLLM_DIV_58 /*!< PLLSAI division factor for PLLSAIM output by 58 */ -#define LL_RCC_PLLSAIM_DIV_59 LL_RCC_PLLM_DIV_59 /*!< PLLSAI division factor for PLLSAIM output by 59 */ -#define LL_RCC_PLLSAIM_DIV_60 LL_RCC_PLLM_DIV_60 /*!< PLLSAI division factor for PLLSAIM output by 60 */ -#define LL_RCC_PLLSAIM_DIV_61 LL_RCC_PLLM_DIV_61 /*!< PLLSAI division factor for PLLSAIM output by 61 */ -#define LL_RCC_PLLSAIM_DIV_62 LL_RCC_PLLM_DIV_62 /*!< PLLSAI division factor for PLLSAIM output by 62 */ -#define LL_RCC_PLLSAIM_DIV_63 LL_RCC_PLLM_DIV_63 /*!< PLLSAI division factor for PLLSAIM output by 63 */ -#endif /* RCC_PLLSAICFGR_PLLSAIM */ -/** - * @} - */ - -/** @defgroup RCC_LL_EC_PLLSAIQ PLLSAIQ division factor (PLLSAIQ) - * @{ - */ -#define LL_RCC_PLLSAIQ_DIV_2 RCC_PLLSAICFGR_PLLSAIQ_1 /*!< PLLSAI division factor for PLLSAIQ output by 2 */ -#define LL_RCC_PLLSAIQ_DIV_3 (RCC_PLLSAICFGR_PLLSAIQ_1 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 3 */ -#define LL_RCC_PLLSAIQ_DIV_4 RCC_PLLSAICFGR_PLLSAIQ_2 /*!< PLLSAI division factor for PLLSAIQ output by 4 */ -#define LL_RCC_PLLSAIQ_DIV_5 (RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 5 */ -#define LL_RCC_PLLSAIQ_DIV_6 (RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_1) /*!< PLLSAI division factor for PLLSAIQ output by 6 */ -#define LL_RCC_PLLSAIQ_DIV_7 (RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_1 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 7 */ -#define LL_RCC_PLLSAIQ_DIV_8 RCC_PLLSAICFGR_PLLSAIQ_3 /*!< PLLSAI division factor for PLLSAIQ output by 8 */ -#define LL_RCC_PLLSAIQ_DIV_9 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 9 */ -#define LL_RCC_PLLSAIQ_DIV_10 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_1) /*!< PLLSAI division factor for PLLSAIQ output by 10 */ -#define LL_RCC_PLLSAIQ_DIV_11 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_1 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 11 */ -#define LL_RCC_PLLSAIQ_DIV_12 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_2) /*!< PLLSAI division factor for PLLSAIQ output by 12 */ -#define LL_RCC_PLLSAIQ_DIV_13 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 13 */ -#define LL_RCC_PLLSAIQ_DIV_14 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_1) /*!< PLLSAI division factor for PLLSAIQ output by 14 */ -#define LL_RCC_PLLSAIQ_DIV_15 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_1 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 15 */ -/** - * @} - */ - -#if defined(RCC_DCKCFGR_PLLSAIDIVQ) -/** @defgroup RCC_LL_EC_PLLSAIDIVQ PLLSAIDIVQ division factor (PLLSAIDIVQ) - * @{ - */ -#define LL_RCC_PLLSAIDIVQ_DIV_1 0x00000000U /*!< PLLSAI division factor for PLLSAIDIVQ output by 1 */ -#define LL_RCC_PLLSAIDIVQ_DIV_2 RCC_DCKCFGR_PLLSAIDIVQ_0 /*!< PLLSAI division factor for PLLSAIDIVQ output by 2 */ -#define LL_RCC_PLLSAIDIVQ_DIV_3 RCC_DCKCFGR_PLLSAIDIVQ_1 /*!< PLLSAI division factor for PLLSAIDIVQ output by 3 */ -#define LL_RCC_PLLSAIDIVQ_DIV_4 (RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 4 */ -#define LL_RCC_PLLSAIDIVQ_DIV_5 RCC_DCKCFGR_PLLSAIDIVQ_2 /*!< PLLSAI division factor for PLLSAIDIVQ output by 5 */ -#define LL_RCC_PLLSAIDIVQ_DIV_6 (RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 6 */ -#define LL_RCC_PLLSAIDIVQ_DIV_7 (RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 7 */ -#define LL_RCC_PLLSAIDIVQ_DIV_8 (RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 8 */ -#define LL_RCC_PLLSAIDIVQ_DIV_9 RCC_DCKCFGR_PLLSAIDIVQ_3 /*!< PLLSAI division factor for PLLSAIDIVQ output by 9 */ -#define LL_RCC_PLLSAIDIVQ_DIV_10 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 10 */ -#define LL_RCC_PLLSAIDIVQ_DIV_11 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 11 */ -#define LL_RCC_PLLSAIDIVQ_DIV_12 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 12 */ -#define LL_RCC_PLLSAIDIVQ_DIV_13 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2) /*!< PLLSAI division factor for PLLSAIDIVQ output by 13 */ -#define LL_RCC_PLLSAIDIVQ_DIV_14 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 14 */ -#define LL_RCC_PLLSAIDIVQ_DIV_15 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 15 */ -#define LL_RCC_PLLSAIDIVQ_DIV_16 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 16 */ -#define LL_RCC_PLLSAIDIVQ_DIV_17 RCC_DCKCFGR_PLLSAIDIVQ_4 /*!< PLLSAI division factor for PLLSAIDIVQ output by 17 */ -#define LL_RCC_PLLSAIDIVQ_DIV_18 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 18 */ -#define LL_RCC_PLLSAIDIVQ_DIV_19 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 19 */ -#define LL_RCC_PLLSAIDIVQ_DIV_20 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 20 */ -#define LL_RCC_PLLSAIDIVQ_DIV_21 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_2) /*!< PLLSAI division factor for PLLSAIDIVQ output by 21 */ -#define LL_RCC_PLLSAIDIVQ_DIV_22 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 22 */ -#define LL_RCC_PLLSAIDIVQ_DIV_23 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 23 */ -#define LL_RCC_PLLSAIDIVQ_DIV_24 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 24 */ -#define LL_RCC_PLLSAIDIVQ_DIV_25 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3) /*!< PLLSAI division factor for PLLSAIDIVQ output by 25 */ -#define LL_RCC_PLLSAIDIVQ_DIV_26 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 26 */ -#define LL_RCC_PLLSAIDIVQ_DIV_27 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 27 */ -#define LL_RCC_PLLSAIDIVQ_DIV_28 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 28 */ -#define LL_RCC_PLLSAIDIVQ_DIV_29 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2) /*!< PLLSAI division factor for PLLSAIDIVQ output by 29 */ -#define LL_RCC_PLLSAIDIVQ_DIV_30 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 30 */ -#define LL_RCC_PLLSAIDIVQ_DIV_31 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 31 */ -#define LL_RCC_PLLSAIDIVQ_DIV_32 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 32 */ -/** - * @} - */ -#endif /* RCC_DCKCFGR_PLLSAIDIVQ */ - -#if defined(RCC_PLLSAICFGR_PLLSAIR) -/** @defgroup RCC_LL_EC_PLLSAIR PLLSAIR division factor (PLLSAIR) - * @{ - */ -#define LL_RCC_PLLSAIR_DIV_2 RCC_PLLSAICFGR_PLLSAIR_1 /*!< PLLSAI division factor for PLLSAIR output by 2 */ -#define LL_RCC_PLLSAIR_DIV_3 (RCC_PLLSAICFGR_PLLSAIR_1 | RCC_PLLSAICFGR_PLLSAIR_0) /*!< PLLSAI division factor for PLLSAIR output by 3 */ -#define LL_RCC_PLLSAIR_DIV_4 RCC_PLLSAICFGR_PLLSAIR_2 /*!< PLLSAI division factor for PLLSAIR output by 4 */ -#define LL_RCC_PLLSAIR_DIV_5 (RCC_PLLSAICFGR_PLLSAIR_2 | RCC_PLLSAICFGR_PLLSAIR_0) /*!< PLLSAI division factor for PLLSAIR output by 5 */ -#define LL_RCC_PLLSAIR_DIV_6 (RCC_PLLSAICFGR_PLLSAIR_2 | RCC_PLLSAICFGR_PLLSAIR_1) /*!< PLLSAI division factor for PLLSAIR output by 6 */ -#define LL_RCC_PLLSAIR_DIV_7 (RCC_PLLSAICFGR_PLLSAIR_2 | RCC_PLLSAICFGR_PLLSAIR_1 | RCC_PLLSAICFGR_PLLSAIR_0) /*!< PLLSAI division factor for PLLSAIR output by 7 */ -/** - * @} - */ -#endif /* RCC_PLLSAICFGR_PLLSAIR */ - -#if defined(RCC_DCKCFGR_PLLSAIDIVR) -/** @defgroup RCC_LL_EC_PLLSAIDIVR PLLSAIDIVR division factor (PLLSAIDIVR) - * @{ - */ -#define LL_RCC_PLLSAIDIVR_DIV_2 0x00000000U /*!< PLLSAI division factor for PLLSAIDIVR output by 2 */ -#define LL_RCC_PLLSAIDIVR_DIV_4 RCC_DCKCFGR_PLLSAIDIVR_0 /*!< PLLSAI division factor for PLLSAIDIVR output by 4 */ -#define LL_RCC_PLLSAIDIVR_DIV_8 RCC_DCKCFGR_PLLSAIDIVR_1 /*!< PLLSAI division factor for PLLSAIDIVR output by 8 */ -#define LL_RCC_PLLSAIDIVR_DIV_16 (RCC_DCKCFGR_PLLSAIDIVR_1 | RCC_DCKCFGR_PLLSAIDIVR_0) /*!< PLLSAI division factor for PLLSAIDIVR output by 16 */ -/** - * @} - */ -#endif /* RCC_DCKCFGR_PLLSAIDIVR */ - -#if defined(RCC_PLLSAICFGR_PLLSAIP) -/** @defgroup RCC_LL_EC_PLLSAIP PLLSAIP division factor (PLLSAIP) - * @{ - */ -#define LL_RCC_PLLSAIP_DIV_2 0x00000000U /*!< PLLSAI division factor for PLLSAIP output by 2 */ -#define LL_RCC_PLLSAIP_DIV_4 RCC_PLLSAICFGR_PLLSAIP_0 /*!< PLLSAI division factor for PLLSAIP output by 4 */ -#define LL_RCC_PLLSAIP_DIV_6 RCC_PLLSAICFGR_PLLSAIP_1 /*!< PLLSAI division factor for PLLSAIP output by 6 */ -#define LL_RCC_PLLSAIP_DIV_8 (RCC_PLLSAICFGR_PLLSAIP_1 | RCC_PLLSAICFGR_PLLSAIP_0) /*!< PLLSAI division factor for PLLSAIP output by 8 */ -/** - * @} - */ -#endif /* RCC_PLLSAICFGR_PLLSAIP */ -#endif /* RCC_PLLSAI_SUPPORT */ -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup RCC_LL_Exported_Macros RCC Exported Macros - * @{ - */ - -/** @defgroup RCC_LL_EM_WRITE_READ Common Write and read registers Macros - * @{ - */ - -/** - * @brief Write a value in RCC register - * @param __REG__ Register to be written - * @param __VALUE__ Value to be written in the register - * @retval None - */ -#define LL_RCC_WriteReg(__REG__, __VALUE__) WRITE_REG(RCC->__REG__, (__VALUE__)) - -/** - * @brief Read a value in RCC register - * @param __REG__ Register to be read - * @retval Register value - */ -#define LL_RCC_ReadReg(__REG__) READ_REG(RCC->__REG__) -/** - * @} - */ - -/** @defgroup RCC_LL_EM_CALC_FREQ Calculate frequencies - * @{ - */ - -/** - * @brief Helper macro to calculate the PLLCLK frequency on system domain - * @note ex: @ref __LL_RCC_CALC_PLLCLK_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), - * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetP ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param __PLLN__ Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - * @param __PLLP__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLP_DIV_2 - * @arg @ref LL_RCC_PLLP_DIV_4 - * @arg @ref LL_RCC_PLLP_DIV_6 - * @arg @ref LL_RCC_PLLP_DIV_8 - * @retval PLL clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLCLK_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ - ((((__PLLP__) >> RCC_PLLCFGR_PLLP_Pos ) + 1U) * 2U)) - -#if defined(RCC_PLLR_SYSCLK_SUPPORT) -/** - * @brief Helper macro to calculate the PLLRCLK frequency on system domain - * @note ex: @ref __LL_RCC_CALC_PLLRCLK_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), - * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param __PLLN__ Between 50 and 432 - * @param __PLLR__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - * @retval PLL clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLRCLK_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ - ((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos )) - -#endif /* RCC_PLLR_SYSCLK_SUPPORT */ - -/** - * @brief Helper macro to calculate the PLLCLK frequency used on 48M domain - * @note ex: @ref __LL_RCC_CALC_PLLCLK_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), - * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetQ ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param __PLLN__ Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - * @param __PLLQ__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLQ_DIV_2 - * @arg @ref LL_RCC_PLLQ_DIV_3 - * @arg @ref LL_RCC_PLLQ_DIV_4 - * @arg @ref LL_RCC_PLLQ_DIV_5 - * @arg @ref LL_RCC_PLLQ_DIV_6 - * @arg @ref LL_RCC_PLLQ_DIV_7 - * @arg @ref LL_RCC_PLLQ_DIV_8 - * @arg @ref LL_RCC_PLLQ_DIV_9 - * @arg @ref LL_RCC_PLLQ_DIV_10 - * @arg @ref LL_RCC_PLLQ_DIV_11 - * @arg @ref LL_RCC_PLLQ_DIV_12 - * @arg @ref LL_RCC_PLLQ_DIV_13 - * @arg @ref LL_RCC_PLLQ_DIV_14 - * @arg @ref LL_RCC_PLLQ_DIV_15 - * @retval PLL clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLCLK_48M_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ - ((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos )) - -#if defined(DSI) -/** - * @brief Helper macro to calculate the PLLCLK frequency used on DSI - * @note ex: @ref __LL_RCC_CALC_PLLCLK_DSI_FREQ (HSE_VALUE, @ref LL_RCC_PLL_GetDivider (), - * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param __PLLN__ Between 50 and 432 - * @param __PLLR__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - * @retval PLL clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLCLK_DSI_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ - ((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos )) -#endif /* DSI */ - -#if defined(RCC_PLLR_I2S_CLKSOURCE_SUPPORT) -/** - * @brief Helper macro to calculate the PLLCLK frequency used on I2S - * @note ex: @ref __LL_RCC_CALC_PLLCLK_I2S_FREQ (HSE_VALUE, @ref LL_RCC_PLL_GetDivider (), - * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param __PLLN__ Between 50 and 432 - * @param __PLLR__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - * @retval PLL clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLCLK_I2S_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ - ((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos )) -#endif /* RCC_PLLR_I2S_CLKSOURCE_SUPPORT */ - -#if defined(SPDIFRX) -/** - * @brief Helper macro to calculate the PLLCLK frequency used on SPDIFRX - * @note ex: @ref __LL_RCC_CALC_PLLCLK_SPDIFRX_FREQ (HSE_VALUE, @ref LL_RCC_PLL_GetDivider (), - * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param __PLLN__ Between 50 and 432 - * @param __PLLR__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - * @retval PLL clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLCLK_SPDIFRX_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ - ((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos )) -#endif /* SPDIFRX */ - -#if defined(RCC_PLLCFGR_PLLR) -#if defined(SAI1) -/** - * @brief Helper macro to calculate the PLLCLK frequency used on SAI - * @note ex: @ref __LL_RCC_CALC_PLLCLK_SAI_FREQ (HSE_VALUE, @ref LL_RCC_PLL_GetDivider (), - * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR (), @ref LL_RCC_PLL_GetDIVR ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param __PLLN__ Between 50 and 432 - * @param __PLLR__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - * @param __PLLDIVR__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLDIVR_DIV_1 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_2 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_3 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_4 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_5 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_6 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_7 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_8 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_9 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_10 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_11 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_12 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_13 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_14 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_15 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_16 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_17 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_18 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_19 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_20 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_21 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_22 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_23 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_24 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_25 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_26 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_27 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_28 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_29 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_30 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_31 (*) - * - * (*) value not defined in all devices. - * @retval PLL clock frequency (in Hz) - */ -#if defined(RCC_DCKCFGR_PLLDIVR) -#define __LL_RCC_CALC_PLLCLK_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__, __PLLDIVR__) (((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ - ((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos )) / ((__PLLDIVR__) >> RCC_DCKCFGR_PLLDIVR_Pos )) -#else -#define __LL_RCC_CALC_PLLCLK_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ - ((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos )) -#endif /* RCC_DCKCFGR_PLLDIVR */ -#endif /* SAI1 */ -#endif /* RCC_PLLCFGR_PLLR */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** - * @brief Helper macro to calculate the PLLSAI frequency used for SAI domain - * @note ex: @ref __LL_RCC_CALC_PLLSAI_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI_GetDivider (), - * @ref LL_RCC_PLLSAI_GetN (), @ref LL_RCC_PLLSAI_GetQ (), @ref LL_RCC_PLLSAI_GetDIVQ ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIM_DIV_2 - * @arg @ref LL_RCC_PLLSAIM_DIV_3 - * @arg @ref LL_RCC_PLLSAIM_DIV_4 - * @arg @ref LL_RCC_PLLSAIM_DIV_5 - * @arg @ref LL_RCC_PLLSAIM_DIV_6 - * @arg @ref LL_RCC_PLLSAIM_DIV_7 - * @arg @ref LL_RCC_PLLSAIM_DIV_8 - * @arg @ref LL_RCC_PLLSAIM_DIV_9 - * @arg @ref LL_RCC_PLLSAIM_DIV_10 - * @arg @ref LL_RCC_PLLSAIM_DIV_11 - * @arg @ref LL_RCC_PLLSAIM_DIV_12 - * @arg @ref LL_RCC_PLLSAIM_DIV_13 - * @arg @ref LL_RCC_PLLSAIM_DIV_14 - * @arg @ref LL_RCC_PLLSAIM_DIV_15 - * @arg @ref LL_RCC_PLLSAIM_DIV_16 - * @arg @ref LL_RCC_PLLSAIM_DIV_17 - * @arg @ref LL_RCC_PLLSAIM_DIV_18 - * @arg @ref LL_RCC_PLLSAIM_DIV_19 - * @arg @ref LL_RCC_PLLSAIM_DIV_20 - * @arg @ref LL_RCC_PLLSAIM_DIV_21 - * @arg @ref LL_RCC_PLLSAIM_DIV_22 - * @arg @ref LL_RCC_PLLSAIM_DIV_23 - * @arg @ref LL_RCC_PLLSAIM_DIV_24 - * @arg @ref LL_RCC_PLLSAIM_DIV_25 - * @arg @ref LL_RCC_PLLSAIM_DIV_26 - * @arg @ref LL_RCC_PLLSAIM_DIV_27 - * @arg @ref LL_RCC_PLLSAIM_DIV_28 - * @arg @ref LL_RCC_PLLSAIM_DIV_29 - * @arg @ref LL_RCC_PLLSAIM_DIV_30 - * @arg @ref LL_RCC_PLLSAIM_DIV_31 - * @arg @ref LL_RCC_PLLSAIM_DIV_32 - * @arg @ref LL_RCC_PLLSAIM_DIV_33 - * @arg @ref LL_RCC_PLLSAIM_DIV_34 - * @arg @ref LL_RCC_PLLSAIM_DIV_35 - * @arg @ref LL_RCC_PLLSAIM_DIV_36 - * @arg @ref LL_RCC_PLLSAIM_DIV_37 - * @arg @ref LL_RCC_PLLSAIM_DIV_38 - * @arg @ref LL_RCC_PLLSAIM_DIV_39 - * @arg @ref LL_RCC_PLLSAIM_DIV_40 - * @arg @ref LL_RCC_PLLSAIM_DIV_41 - * @arg @ref LL_RCC_PLLSAIM_DIV_42 - * @arg @ref LL_RCC_PLLSAIM_DIV_43 - * @arg @ref LL_RCC_PLLSAIM_DIV_44 - * @arg @ref LL_RCC_PLLSAIM_DIV_45 - * @arg @ref LL_RCC_PLLSAIM_DIV_46 - * @arg @ref LL_RCC_PLLSAIM_DIV_47 - * @arg @ref LL_RCC_PLLSAIM_DIV_48 - * @arg @ref LL_RCC_PLLSAIM_DIV_49 - * @arg @ref LL_RCC_PLLSAIM_DIV_50 - * @arg @ref LL_RCC_PLLSAIM_DIV_51 - * @arg @ref LL_RCC_PLLSAIM_DIV_52 - * @arg @ref LL_RCC_PLLSAIM_DIV_53 - * @arg @ref LL_RCC_PLLSAIM_DIV_54 - * @arg @ref LL_RCC_PLLSAIM_DIV_55 - * @arg @ref LL_RCC_PLLSAIM_DIV_56 - * @arg @ref LL_RCC_PLLSAIM_DIV_57 - * @arg @ref LL_RCC_PLLSAIM_DIV_58 - * @arg @ref LL_RCC_PLLSAIM_DIV_59 - * @arg @ref LL_RCC_PLLSAIM_DIV_60 - * @arg @ref LL_RCC_PLLSAIM_DIV_61 - * @arg @ref LL_RCC_PLLSAIM_DIV_62 - * @arg @ref LL_RCC_PLLSAIM_DIV_63 - * @param __PLLSAIN__ Between 49/50(*) and 432 - * - * (*) value not defined in all devices. - * @param __PLLSAIQ__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIQ_DIV_2 - * @arg @ref LL_RCC_PLLSAIQ_DIV_3 - * @arg @ref LL_RCC_PLLSAIQ_DIV_4 - * @arg @ref LL_RCC_PLLSAIQ_DIV_5 - * @arg @ref LL_RCC_PLLSAIQ_DIV_6 - * @arg @ref LL_RCC_PLLSAIQ_DIV_7 - * @arg @ref LL_RCC_PLLSAIQ_DIV_8 - * @arg @ref LL_RCC_PLLSAIQ_DIV_9 - * @arg @ref LL_RCC_PLLSAIQ_DIV_10 - * @arg @ref LL_RCC_PLLSAIQ_DIV_11 - * @arg @ref LL_RCC_PLLSAIQ_DIV_12 - * @arg @ref LL_RCC_PLLSAIQ_DIV_13 - * @arg @ref LL_RCC_PLLSAIQ_DIV_14 - * @arg @ref LL_RCC_PLLSAIQ_DIV_15 - * @param __PLLSAIDIVQ__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_1 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_2 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_3 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_4 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_5 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_6 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_7 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_8 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_9 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_10 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_11 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_12 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_13 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_14 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_15 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_16 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_17 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_18 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_19 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_20 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_21 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_22 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_23 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_24 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_25 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_26 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_27 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_28 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_29 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_30 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_31 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_32 - * @retval PLLSAI clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLSAI_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAIN__, __PLLSAIQ__, __PLLSAIDIVQ__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLSAIN__) / \ - (((__PLLSAIQ__) >> RCC_PLLSAICFGR_PLLSAIQ_Pos) * (((__PLLSAIDIVQ__) >> RCC_DCKCFGR_PLLSAIDIVQ_Pos) + 1U))) - -#if defined(RCC_PLLSAICFGR_PLLSAIP) -/** - * @brief Helper macro to calculate the PLLSAI frequency used on 48Mhz domain - * @note ex: @ref __LL_RCC_CALC_PLLSAI_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI_GetDivider (), - * @ref LL_RCC_PLLSAI_GetN (), @ref LL_RCC_PLLSAI_GetP ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIM_DIV_2 - * @arg @ref LL_RCC_PLLSAIM_DIV_3 - * @arg @ref LL_RCC_PLLSAIM_DIV_4 - * @arg @ref LL_RCC_PLLSAIM_DIV_5 - * @arg @ref LL_RCC_PLLSAIM_DIV_6 - * @arg @ref LL_RCC_PLLSAIM_DIV_7 - * @arg @ref LL_RCC_PLLSAIM_DIV_8 - * @arg @ref LL_RCC_PLLSAIM_DIV_9 - * @arg @ref LL_RCC_PLLSAIM_DIV_10 - * @arg @ref LL_RCC_PLLSAIM_DIV_11 - * @arg @ref LL_RCC_PLLSAIM_DIV_12 - * @arg @ref LL_RCC_PLLSAIM_DIV_13 - * @arg @ref LL_RCC_PLLSAIM_DIV_14 - * @arg @ref LL_RCC_PLLSAIM_DIV_15 - * @arg @ref LL_RCC_PLLSAIM_DIV_16 - * @arg @ref LL_RCC_PLLSAIM_DIV_17 - * @arg @ref LL_RCC_PLLSAIM_DIV_18 - * @arg @ref LL_RCC_PLLSAIM_DIV_19 - * @arg @ref LL_RCC_PLLSAIM_DIV_20 - * @arg @ref LL_RCC_PLLSAIM_DIV_21 - * @arg @ref LL_RCC_PLLSAIM_DIV_22 - * @arg @ref LL_RCC_PLLSAIM_DIV_23 - * @arg @ref LL_RCC_PLLSAIM_DIV_24 - * @arg @ref LL_RCC_PLLSAIM_DIV_25 - * @arg @ref LL_RCC_PLLSAIM_DIV_26 - * @arg @ref LL_RCC_PLLSAIM_DIV_27 - * @arg @ref LL_RCC_PLLSAIM_DIV_28 - * @arg @ref LL_RCC_PLLSAIM_DIV_29 - * @arg @ref LL_RCC_PLLSAIM_DIV_30 - * @arg @ref LL_RCC_PLLSAIM_DIV_31 - * @arg @ref LL_RCC_PLLSAIM_DIV_32 - * @arg @ref LL_RCC_PLLSAIM_DIV_33 - * @arg @ref LL_RCC_PLLSAIM_DIV_34 - * @arg @ref LL_RCC_PLLSAIM_DIV_35 - * @arg @ref LL_RCC_PLLSAIM_DIV_36 - * @arg @ref LL_RCC_PLLSAIM_DIV_37 - * @arg @ref LL_RCC_PLLSAIM_DIV_38 - * @arg @ref LL_RCC_PLLSAIM_DIV_39 - * @arg @ref LL_RCC_PLLSAIM_DIV_40 - * @arg @ref LL_RCC_PLLSAIM_DIV_41 - * @arg @ref LL_RCC_PLLSAIM_DIV_42 - * @arg @ref LL_RCC_PLLSAIM_DIV_43 - * @arg @ref LL_RCC_PLLSAIM_DIV_44 - * @arg @ref LL_RCC_PLLSAIM_DIV_45 - * @arg @ref LL_RCC_PLLSAIM_DIV_46 - * @arg @ref LL_RCC_PLLSAIM_DIV_47 - * @arg @ref LL_RCC_PLLSAIM_DIV_48 - * @arg @ref LL_RCC_PLLSAIM_DIV_49 - * @arg @ref LL_RCC_PLLSAIM_DIV_50 - * @arg @ref LL_RCC_PLLSAIM_DIV_51 - * @arg @ref LL_RCC_PLLSAIM_DIV_52 - * @arg @ref LL_RCC_PLLSAIM_DIV_53 - * @arg @ref LL_RCC_PLLSAIM_DIV_54 - * @arg @ref LL_RCC_PLLSAIM_DIV_55 - * @arg @ref LL_RCC_PLLSAIM_DIV_56 - * @arg @ref LL_RCC_PLLSAIM_DIV_57 - * @arg @ref LL_RCC_PLLSAIM_DIV_58 - * @arg @ref LL_RCC_PLLSAIM_DIV_59 - * @arg @ref LL_RCC_PLLSAIM_DIV_60 - * @arg @ref LL_RCC_PLLSAIM_DIV_61 - * @arg @ref LL_RCC_PLLSAIM_DIV_62 - * @arg @ref LL_RCC_PLLSAIM_DIV_63 - * @param __PLLSAIN__ Between 50 and 432 - * @param __PLLSAIP__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIP_DIV_2 - * @arg @ref LL_RCC_PLLSAIP_DIV_4 - * @arg @ref LL_RCC_PLLSAIP_DIV_6 - * @arg @ref LL_RCC_PLLSAIP_DIV_8 - * @retval PLLSAI clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLSAI_48M_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAIN__, __PLLSAIP__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLSAIN__) / \ - ((((__PLLSAIP__) >> RCC_PLLSAICFGR_PLLSAIP_Pos) + 1U) * 2U)) -#endif /* RCC_PLLSAICFGR_PLLSAIP */ - -#if defined(LTDC) -/** - * @brief Helper macro to calculate the PLLSAI frequency used for LTDC domain - * @note ex: @ref __LL_RCC_CALC_PLLSAI_LTDC_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI_GetDivider (), - * @ref LL_RCC_PLLSAI_GetN (), @ref LL_RCC_PLLSAI_GetR (), @ref LL_RCC_PLLSAI_GetDIVR ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIM_DIV_2 - * @arg @ref LL_RCC_PLLSAIM_DIV_3 - * @arg @ref LL_RCC_PLLSAIM_DIV_4 - * @arg @ref LL_RCC_PLLSAIM_DIV_5 - * @arg @ref LL_RCC_PLLSAIM_DIV_6 - * @arg @ref LL_RCC_PLLSAIM_DIV_7 - * @arg @ref LL_RCC_PLLSAIM_DIV_8 - * @arg @ref LL_RCC_PLLSAIM_DIV_9 - * @arg @ref LL_RCC_PLLSAIM_DIV_10 - * @arg @ref LL_RCC_PLLSAIM_DIV_11 - * @arg @ref LL_RCC_PLLSAIM_DIV_12 - * @arg @ref LL_RCC_PLLSAIM_DIV_13 - * @arg @ref LL_RCC_PLLSAIM_DIV_14 - * @arg @ref LL_RCC_PLLSAIM_DIV_15 - * @arg @ref LL_RCC_PLLSAIM_DIV_16 - * @arg @ref LL_RCC_PLLSAIM_DIV_17 - * @arg @ref LL_RCC_PLLSAIM_DIV_18 - * @arg @ref LL_RCC_PLLSAIM_DIV_19 - * @arg @ref LL_RCC_PLLSAIM_DIV_20 - * @arg @ref LL_RCC_PLLSAIM_DIV_21 - * @arg @ref LL_RCC_PLLSAIM_DIV_22 - * @arg @ref LL_RCC_PLLSAIM_DIV_23 - * @arg @ref LL_RCC_PLLSAIM_DIV_24 - * @arg @ref LL_RCC_PLLSAIM_DIV_25 - * @arg @ref LL_RCC_PLLSAIM_DIV_26 - * @arg @ref LL_RCC_PLLSAIM_DIV_27 - * @arg @ref LL_RCC_PLLSAIM_DIV_28 - * @arg @ref LL_RCC_PLLSAIM_DIV_29 - * @arg @ref LL_RCC_PLLSAIM_DIV_30 - * @arg @ref LL_RCC_PLLSAIM_DIV_31 - * @arg @ref LL_RCC_PLLSAIM_DIV_32 - * @arg @ref LL_RCC_PLLSAIM_DIV_33 - * @arg @ref LL_RCC_PLLSAIM_DIV_34 - * @arg @ref LL_RCC_PLLSAIM_DIV_35 - * @arg @ref LL_RCC_PLLSAIM_DIV_36 - * @arg @ref LL_RCC_PLLSAIM_DIV_37 - * @arg @ref LL_RCC_PLLSAIM_DIV_38 - * @arg @ref LL_RCC_PLLSAIM_DIV_39 - * @arg @ref LL_RCC_PLLSAIM_DIV_40 - * @arg @ref LL_RCC_PLLSAIM_DIV_41 - * @arg @ref LL_RCC_PLLSAIM_DIV_42 - * @arg @ref LL_RCC_PLLSAIM_DIV_43 - * @arg @ref LL_RCC_PLLSAIM_DIV_44 - * @arg @ref LL_RCC_PLLSAIM_DIV_45 - * @arg @ref LL_RCC_PLLSAIM_DIV_46 - * @arg @ref LL_RCC_PLLSAIM_DIV_47 - * @arg @ref LL_RCC_PLLSAIM_DIV_48 - * @arg @ref LL_RCC_PLLSAIM_DIV_49 - * @arg @ref LL_RCC_PLLSAIM_DIV_50 - * @arg @ref LL_RCC_PLLSAIM_DIV_51 - * @arg @ref LL_RCC_PLLSAIM_DIV_52 - * @arg @ref LL_RCC_PLLSAIM_DIV_53 - * @arg @ref LL_RCC_PLLSAIM_DIV_54 - * @arg @ref LL_RCC_PLLSAIM_DIV_55 - * @arg @ref LL_RCC_PLLSAIM_DIV_56 - * @arg @ref LL_RCC_PLLSAIM_DIV_57 - * @arg @ref LL_RCC_PLLSAIM_DIV_58 - * @arg @ref LL_RCC_PLLSAIM_DIV_59 - * @arg @ref LL_RCC_PLLSAIM_DIV_60 - * @arg @ref LL_RCC_PLLSAIM_DIV_61 - * @arg @ref LL_RCC_PLLSAIM_DIV_62 - * @arg @ref LL_RCC_PLLSAIM_DIV_63 - * @param __PLLSAIN__ Between 49/50(*) and 432 - * - * (*) value not defined in all devices. - * @param __PLLSAIR__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIR_DIV_2 - * @arg @ref LL_RCC_PLLSAIR_DIV_3 - * @arg @ref LL_RCC_PLLSAIR_DIV_4 - * @arg @ref LL_RCC_PLLSAIR_DIV_5 - * @arg @ref LL_RCC_PLLSAIR_DIV_6 - * @arg @ref LL_RCC_PLLSAIR_DIV_7 - * @param __PLLSAIDIVR__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_2 - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_4 - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_8 - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_16 - * @retval PLLSAI clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLSAI_LTDC_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAIN__, __PLLSAIR__, __PLLSAIDIVR__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLSAIN__) / \ - (((__PLLSAIR__) >> RCC_PLLSAICFGR_PLLSAIR_Pos) * (aRCC_PLLSAIDIVRPrescTable[(__PLLSAIDIVR__) >> RCC_DCKCFGR_PLLSAIDIVR_Pos]))) -#endif /* LTDC */ -#endif /* RCC_PLLSAI_SUPPORT */ - -#if defined(RCC_PLLI2S_SUPPORT) -#if defined(RCC_DCKCFGR_PLLI2SDIVQ) || defined(RCC_DCKCFGR_PLLI2SDIVR) -/** - * @brief Helper macro to calculate the PLLI2S frequency used for SAI domain - * @note ex: @ref __LL_RCC_CALC_PLLI2S_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLLI2S_GetDivider (), - * @ref LL_RCC_PLLI2S_GetN (), @ref LL_RCC_PLLI2S_GetQ (), @ref LL_RCC_PLLI2S_GetDIVQ ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SM_DIV_2 - * @arg @ref LL_RCC_PLLI2SM_DIV_3 - * @arg @ref LL_RCC_PLLI2SM_DIV_4 - * @arg @ref LL_RCC_PLLI2SM_DIV_5 - * @arg @ref LL_RCC_PLLI2SM_DIV_6 - * @arg @ref LL_RCC_PLLI2SM_DIV_7 - * @arg @ref LL_RCC_PLLI2SM_DIV_8 - * @arg @ref LL_RCC_PLLI2SM_DIV_9 - * @arg @ref LL_RCC_PLLI2SM_DIV_10 - * @arg @ref LL_RCC_PLLI2SM_DIV_11 - * @arg @ref LL_RCC_PLLI2SM_DIV_12 - * @arg @ref LL_RCC_PLLI2SM_DIV_13 - * @arg @ref LL_RCC_PLLI2SM_DIV_14 - * @arg @ref LL_RCC_PLLI2SM_DIV_15 - * @arg @ref LL_RCC_PLLI2SM_DIV_16 - * @arg @ref LL_RCC_PLLI2SM_DIV_17 - * @arg @ref LL_RCC_PLLI2SM_DIV_18 - * @arg @ref LL_RCC_PLLI2SM_DIV_19 - * @arg @ref LL_RCC_PLLI2SM_DIV_20 - * @arg @ref LL_RCC_PLLI2SM_DIV_21 - * @arg @ref LL_RCC_PLLI2SM_DIV_22 - * @arg @ref LL_RCC_PLLI2SM_DIV_23 - * @arg @ref LL_RCC_PLLI2SM_DIV_24 - * @arg @ref LL_RCC_PLLI2SM_DIV_25 - * @arg @ref LL_RCC_PLLI2SM_DIV_26 - * @arg @ref LL_RCC_PLLI2SM_DIV_27 - * @arg @ref LL_RCC_PLLI2SM_DIV_28 - * @arg @ref LL_RCC_PLLI2SM_DIV_29 - * @arg @ref LL_RCC_PLLI2SM_DIV_30 - * @arg @ref LL_RCC_PLLI2SM_DIV_31 - * @arg @ref LL_RCC_PLLI2SM_DIV_32 - * @arg @ref LL_RCC_PLLI2SM_DIV_33 - * @arg @ref LL_RCC_PLLI2SM_DIV_34 - * @arg @ref LL_RCC_PLLI2SM_DIV_35 - * @arg @ref LL_RCC_PLLI2SM_DIV_36 - * @arg @ref LL_RCC_PLLI2SM_DIV_37 - * @arg @ref LL_RCC_PLLI2SM_DIV_38 - * @arg @ref LL_RCC_PLLI2SM_DIV_39 - * @arg @ref LL_RCC_PLLI2SM_DIV_40 - * @arg @ref LL_RCC_PLLI2SM_DIV_41 - * @arg @ref LL_RCC_PLLI2SM_DIV_42 - * @arg @ref LL_RCC_PLLI2SM_DIV_43 - * @arg @ref LL_RCC_PLLI2SM_DIV_44 - * @arg @ref LL_RCC_PLLI2SM_DIV_45 - * @arg @ref LL_RCC_PLLI2SM_DIV_46 - * @arg @ref LL_RCC_PLLI2SM_DIV_47 - * @arg @ref LL_RCC_PLLI2SM_DIV_48 - * @arg @ref LL_RCC_PLLI2SM_DIV_49 - * @arg @ref LL_RCC_PLLI2SM_DIV_50 - * @arg @ref LL_RCC_PLLI2SM_DIV_51 - * @arg @ref LL_RCC_PLLI2SM_DIV_52 - * @arg @ref LL_RCC_PLLI2SM_DIV_53 - * @arg @ref LL_RCC_PLLI2SM_DIV_54 - * @arg @ref LL_RCC_PLLI2SM_DIV_55 - * @arg @ref LL_RCC_PLLI2SM_DIV_56 - * @arg @ref LL_RCC_PLLI2SM_DIV_57 - * @arg @ref LL_RCC_PLLI2SM_DIV_58 - * @arg @ref LL_RCC_PLLI2SM_DIV_59 - * @arg @ref LL_RCC_PLLI2SM_DIV_60 - * @arg @ref LL_RCC_PLLI2SM_DIV_61 - * @arg @ref LL_RCC_PLLI2SM_DIV_62 - * @arg @ref LL_RCC_PLLI2SM_DIV_63 - * @param __PLLI2SN__ Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - * @param __PLLI2SQ_R__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SQ_DIV_2 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_3 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_4 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_5 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_6 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_7 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_8 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_9 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_10 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_11 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_12 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_13 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_14 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_15 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_2 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_3 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_4 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_5 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_6 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_7 (*) - * - * (*) value not defined in all devices. - * @param __PLLI2SDIVQ_R__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_1 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_2 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_3 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_4 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_5 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_6 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_7 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_8 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_9 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_10 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_11 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_12 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_13 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_14 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_15 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_16 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_17 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_18 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_19 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_20 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_21 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_22 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_23 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_24 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_25 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_26 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_27 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_28 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_29 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_30 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_31 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_32 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_1 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_2 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_3 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_4 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_5 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_6 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_7 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_8 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_9 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_10 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_11 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_12 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_13 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_14 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_15 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_16 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_17 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_18 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_19 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_20 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_21 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_22 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_23 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_24 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_25 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_26 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_27 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_28 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_29 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_30 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_31 (*) - * - * (*) value not defined in all devices. - * @retval PLLI2S clock frequency (in Hz) - */ -#if defined(RCC_DCKCFGR_PLLI2SDIVQ) -#define __LL_RCC_CALC_PLLI2S_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLI2SN__, __PLLI2SQ_R__, __PLLI2SDIVQ_R__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLI2SN__) / \ - (((__PLLI2SQ_R__) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos) * (((__PLLI2SDIVQ_R__) >> RCC_DCKCFGR_PLLI2SDIVQ_Pos) + 1U))) -#else -#define __LL_RCC_CALC_PLLI2S_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLI2SN__, __PLLI2SQ_R__, __PLLI2SDIVQ_R__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLI2SN__) / \ - (((__PLLI2SQ_R__) >> RCC_PLLI2SCFGR_PLLI2SR_Pos) * ((__PLLI2SDIVQ_R__) >> RCC_DCKCFGR_PLLI2SDIVR_Pos))) - -#endif /* RCC_DCKCFGR_PLLI2SDIVQ */ -#endif /* RCC_DCKCFGR_PLLI2SDIVQ || RCC_DCKCFGR_PLLI2SDIVR */ - -#if defined(SPDIFRX) -/** - * @brief Helper macro to calculate the PLLI2S frequency used on SPDIFRX domain - * @note ex: @ref __LL_RCC_CALC_PLLI2S_SPDIFRX_FREQ (HSE_VALUE,@ref LL_RCC_PLLI2S_GetDivider (), - * @ref LL_RCC_PLLI2S_GetN (), @ref LL_RCC_PLLI2S_GetP ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SM_DIV_2 - * @arg @ref LL_RCC_PLLI2SM_DIV_3 - * @arg @ref LL_RCC_PLLI2SM_DIV_4 - * @arg @ref LL_RCC_PLLI2SM_DIV_5 - * @arg @ref LL_RCC_PLLI2SM_DIV_6 - * @arg @ref LL_RCC_PLLI2SM_DIV_7 - * @arg @ref LL_RCC_PLLI2SM_DIV_8 - * @arg @ref LL_RCC_PLLI2SM_DIV_9 - * @arg @ref LL_RCC_PLLI2SM_DIV_10 - * @arg @ref LL_RCC_PLLI2SM_DIV_11 - * @arg @ref LL_RCC_PLLI2SM_DIV_12 - * @arg @ref LL_RCC_PLLI2SM_DIV_13 - * @arg @ref LL_RCC_PLLI2SM_DIV_14 - * @arg @ref LL_RCC_PLLI2SM_DIV_15 - * @arg @ref LL_RCC_PLLI2SM_DIV_16 - * @arg @ref LL_RCC_PLLI2SM_DIV_17 - * @arg @ref LL_RCC_PLLI2SM_DIV_18 - * @arg @ref LL_RCC_PLLI2SM_DIV_19 - * @arg @ref LL_RCC_PLLI2SM_DIV_20 - * @arg @ref LL_RCC_PLLI2SM_DIV_21 - * @arg @ref LL_RCC_PLLI2SM_DIV_22 - * @arg @ref LL_RCC_PLLI2SM_DIV_23 - * @arg @ref LL_RCC_PLLI2SM_DIV_24 - * @arg @ref LL_RCC_PLLI2SM_DIV_25 - * @arg @ref LL_RCC_PLLI2SM_DIV_26 - * @arg @ref LL_RCC_PLLI2SM_DIV_27 - * @arg @ref LL_RCC_PLLI2SM_DIV_28 - * @arg @ref LL_RCC_PLLI2SM_DIV_29 - * @arg @ref LL_RCC_PLLI2SM_DIV_30 - * @arg @ref LL_RCC_PLLI2SM_DIV_31 - * @arg @ref LL_RCC_PLLI2SM_DIV_32 - * @arg @ref LL_RCC_PLLI2SM_DIV_33 - * @arg @ref LL_RCC_PLLI2SM_DIV_34 - * @arg @ref LL_RCC_PLLI2SM_DIV_35 - * @arg @ref LL_RCC_PLLI2SM_DIV_36 - * @arg @ref LL_RCC_PLLI2SM_DIV_37 - * @arg @ref LL_RCC_PLLI2SM_DIV_38 - * @arg @ref LL_RCC_PLLI2SM_DIV_39 - * @arg @ref LL_RCC_PLLI2SM_DIV_40 - * @arg @ref LL_RCC_PLLI2SM_DIV_41 - * @arg @ref LL_RCC_PLLI2SM_DIV_42 - * @arg @ref LL_RCC_PLLI2SM_DIV_43 - * @arg @ref LL_RCC_PLLI2SM_DIV_44 - * @arg @ref LL_RCC_PLLI2SM_DIV_45 - * @arg @ref LL_RCC_PLLI2SM_DIV_46 - * @arg @ref LL_RCC_PLLI2SM_DIV_47 - * @arg @ref LL_RCC_PLLI2SM_DIV_48 - * @arg @ref LL_RCC_PLLI2SM_DIV_49 - * @arg @ref LL_RCC_PLLI2SM_DIV_50 - * @arg @ref LL_RCC_PLLI2SM_DIV_51 - * @arg @ref LL_RCC_PLLI2SM_DIV_52 - * @arg @ref LL_RCC_PLLI2SM_DIV_53 - * @arg @ref LL_RCC_PLLI2SM_DIV_54 - * @arg @ref LL_RCC_PLLI2SM_DIV_55 - * @arg @ref LL_RCC_PLLI2SM_DIV_56 - * @arg @ref LL_RCC_PLLI2SM_DIV_57 - * @arg @ref LL_RCC_PLLI2SM_DIV_58 - * @arg @ref LL_RCC_PLLI2SM_DIV_59 - * @arg @ref LL_RCC_PLLI2SM_DIV_60 - * @arg @ref LL_RCC_PLLI2SM_DIV_61 - * @arg @ref LL_RCC_PLLI2SM_DIV_62 - * @arg @ref LL_RCC_PLLI2SM_DIV_63 - * @param __PLLI2SN__ Between 50 and 432 - * @param __PLLI2SP__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SP_DIV_2 - * @arg @ref LL_RCC_PLLI2SP_DIV_4 - * @arg @ref LL_RCC_PLLI2SP_DIV_6 - * @arg @ref LL_RCC_PLLI2SP_DIV_8 - * @retval PLLI2S clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLI2S_SPDIFRX_FREQ(__INPUTFREQ__, __PLLM__, __PLLI2SN__, __PLLI2SP__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLI2SN__) / \ - ((((__PLLI2SP__) >> RCC_PLLI2SCFGR_PLLI2SP_Pos) + 1U) * 2U)) - -#endif /* SPDIFRX */ - -/** - * @brief Helper macro to calculate the PLLI2S frequency used for I2S domain - * @note ex: @ref __LL_RCC_CALC_PLLI2S_I2S_FREQ (HSE_VALUE,@ref LL_RCC_PLLI2S_GetDivider (), - * @ref LL_RCC_PLLI2S_GetN (), @ref LL_RCC_PLLI2S_GetR ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SM_DIV_2 - * @arg @ref LL_RCC_PLLI2SM_DIV_3 - * @arg @ref LL_RCC_PLLI2SM_DIV_4 - * @arg @ref LL_RCC_PLLI2SM_DIV_5 - * @arg @ref LL_RCC_PLLI2SM_DIV_6 - * @arg @ref LL_RCC_PLLI2SM_DIV_7 - * @arg @ref LL_RCC_PLLI2SM_DIV_8 - * @arg @ref LL_RCC_PLLI2SM_DIV_9 - * @arg @ref LL_RCC_PLLI2SM_DIV_10 - * @arg @ref LL_RCC_PLLI2SM_DIV_11 - * @arg @ref LL_RCC_PLLI2SM_DIV_12 - * @arg @ref LL_RCC_PLLI2SM_DIV_13 - * @arg @ref LL_RCC_PLLI2SM_DIV_14 - * @arg @ref LL_RCC_PLLI2SM_DIV_15 - * @arg @ref LL_RCC_PLLI2SM_DIV_16 - * @arg @ref LL_RCC_PLLI2SM_DIV_17 - * @arg @ref LL_RCC_PLLI2SM_DIV_18 - * @arg @ref LL_RCC_PLLI2SM_DIV_19 - * @arg @ref LL_RCC_PLLI2SM_DIV_20 - * @arg @ref LL_RCC_PLLI2SM_DIV_21 - * @arg @ref LL_RCC_PLLI2SM_DIV_22 - * @arg @ref LL_RCC_PLLI2SM_DIV_23 - * @arg @ref LL_RCC_PLLI2SM_DIV_24 - * @arg @ref LL_RCC_PLLI2SM_DIV_25 - * @arg @ref LL_RCC_PLLI2SM_DIV_26 - * @arg @ref LL_RCC_PLLI2SM_DIV_27 - * @arg @ref LL_RCC_PLLI2SM_DIV_28 - * @arg @ref LL_RCC_PLLI2SM_DIV_29 - * @arg @ref LL_RCC_PLLI2SM_DIV_30 - * @arg @ref LL_RCC_PLLI2SM_DIV_31 - * @arg @ref LL_RCC_PLLI2SM_DIV_32 - * @arg @ref LL_RCC_PLLI2SM_DIV_33 - * @arg @ref LL_RCC_PLLI2SM_DIV_34 - * @arg @ref LL_RCC_PLLI2SM_DIV_35 - * @arg @ref LL_RCC_PLLI2SM_DIV_36 - * @arg @ref LL_RCC_PLLI2SM_DIV_37 - * @arg @ref LL_RCC_PLLI2SM_DIV_38 - * @arg @ref LL_RCC_PLLI2SM_DIV_39 - * @arg @ref LL_RCC_PLLI2SM_DIV_40 - * @arg @ref LL_RCC_PLLI2SM_DIV_41 - * @arg @ref LL_RCC_PLLI2SM_DIV_42 - * @arg @ref LL_RCC_PLLI2SM_DIV_43 - * @arg @ref LL_RCC_PLLI2SM_DIV_44 - * @arg @ref LL_RCC_PLLI2SM_DIV_45 - * @arg @ref LL_RCC_PLLI2SM_DIV_46 - * @arg @ref LL_RCC_PLLI2SM_DIV_47 - * @arg @ref LL_RCC_PLLI2SM_DIV_48 - * @arg @ref LL_RCC_PLLI2SM_DIV_49 - * @arg @ref LL_RCC_PLLI2SM_DIV_50 - * @arg @ref LL_RCC_PLLI2SM_DIV_51 - * @arg @ref LL_RCC_PLLI2SM_DIV_52 - * @arg @ref LL_RCC_PLLI2SM_DIV_53 - * @arg @ref LL_RCC_PLLI2SM_DIV_54 - * @arg @ref LL_RCC_PLLI2SM_DIV_55 - * @arg @ref LL_RCC_PLLI2SM_DIV_56 - * @arg @ref LL_RCC_PLLI2SM_DIV_57 - * @arg @ref LL_RCC_PLLI2SM_DIV_58 - * @arg @ref LL_RCC_PLLI2SM_DIV_59 - * @arg @ref LL_RCC_PLLI2SM_DIV_60 - * @arg @ref LL_RCC_PLLI2SM_DIV_61 - * @arg @ref LL_RCC_PLLI2SM_DIV_62 - * @arg @ref LL_RCC_PLLI2SM_DIV_63 - * @param __PLLI2SN__ Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - * @param __PLLI2SR__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SR_DIV_2 - * @arg @ref LL_RCC_PLLI2SR_DIV_3 - * @arg @ref LL_RCC_PLLI2SR_DIV_4 - * @arg @ref LL_RCC_PLLI2SR_DIV_5 - * @arg @ref LL_RCC_PLLI2SR_DIV_6 - * @arg @ref LL_RCC_PLLI2SR_DIV_7 - * @retval PLLI2S clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLI2S_I2S_FREQ(__INPUTFREQ__, __PLLM__, __PLLI2SN__, __PLLI2SR__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLI2SN__) / \ - ((__PLLI2SR__) >> RCC_PLLI2SCFGR_PLLI2SR_Pos)) - -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) && !defined(RCC_DCKCFGR_PLLI2SDIVQ) -/** - * @brief Helper macro to calculate the PLLI2S frequency used for 48Mhz domain - * @note ex: @ref __LL_RCC_CALC_PLLI2S_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLLI2S_GetDivider (), - * @ref LL_RCC_PLLI2S_GetN (), @ref LL_RCC_PLLI2S_GetQ ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SM_DIV_2 - * @arg @ref LL_RCC_PLLI2SM_DIV_3 - * @arg @ref LL_RCC_PLLI2SM_DIV_4 - * @arg @ref LL_RCC_PLLI2SM_DIV_5 - * @arg @ref LL_RCC_PLLI2SM_DIV_6 - * @arg @ref LL_RCC_PLLI2SM_DIV_7 - * @arg @ref LL_RCC_PLLI2SM_DIV_8 - * @arg @ref LL_RCC_PLLI2SM_DIV_9 - * @arg @ref LL_RCC_PLLI2SM_DIV_10 - * @arg @ref LL_RCC_PLLI2SM_DIV_11 - * @arg @ref LL_RCC_PLLI2SM_DIV_12 - * @arg @ref LL_RCC_PLLI2SM_DIV_13 - * @arg @ref LL_RCC_PLLI2SM_DIV_14 - * @arg @ref LL_RCC_PLLI2SM_DIV_15 - * @arg @ref LL_RCC_PLLI2SM_DIV_16 - * @arg @ref LL_RCC_PLLI2SM_DIV_17 - * @arg @ref LL_RCC_PLLI2SM_DIV_18 - * @arg @ref LL_RCC_PLLI2SM_DIV_19 - * @arg @ref LL_RCC_PLLI2SM_DIV_20 - * @arg @ref LL_RCC_PLLI2SM_DIV_21 - * @arg @ref LL_RCC_PLLI2SM_DIV_22 - * @arg @ref LL_RCC_PLLI2SM_DIV_23 - * @arg @ref LL_RCC_PLLI2SM_DIV_24 - * @arg @ref LL_RCC_PLLI2SM_DIV_25 - * @arg @ref LL_RCC_PLLI2SM_DIV_26 - * @arg @ref LL_RCC_PLLI2SM_DIV_27 - * @arg @ref LL_RCC_PLLI2SM_DIV_28 - * @arg @ref LL_RCC_PLLI2SM_DIV_29 - * @arg @ref LL_RCC_PLLI2SM_DIV_30 - * @arg @ref LL_RCC_PLLI2SM_DIV_31 - * @arg @ref LL_RCC_PLLI2SM_DIV_32 - * @arg @ref LL_RCC_PLLI2SM_DIV_33 - * @arg @ref LL_RCC_PLLI2SM_DIV_34 - * @arg @ref LL_RCC_PLLI2SM_DIV_35 - * @arg @ref LL_RCC_PLLI2SM_DIV_36 - * @arg @ref LL_RCC_PLLI2SM_DIV_37 - * @arg @ref LL_RCC_PLLI2SM_DIV_38 - * @arg @ref LL_RCC_PLLI2SM_DIV_39 - * @arg @ref LL_RCC_PLLI2SM_DIV_40 - * @arg @ref LL_RCC_PLLI2SM_DIV_41 - * @arg @ref LL_RCC_PLLI2SM_DIV_42 - * @arg @ref LL_RCC_PLLI2SM_DIV_43 - * @arg @ref LL_RCC_PLLI2SM_DIV_44 - * @arg @ref LL_RCC_PLLI2SM_DIV_45 - * @arg @ref LL_RCC_PLLI2SM_DIV_46 - * @arg @ref LL_RCC_PLLI2SM_DIV_47 - * @arg @ref LL_RCC_PLLI2SM_DIV_48 - * @arg @ref LL_RCC_PLLI2SM_DIV_49 - * @arg @ref LL_RCC_PLLI2SM_DIV_50 - * @arg @ref LL_RCC_PLLI2SM_DIV_51 - * @arg @ref LL_RCC_PLLI2SM_DIV_52 - * @arg @ref LL_RCC_PLLI2SM_DIV_53 - * @arg @ref LL_RCC_PLLI2SM_DIV_54 - * @arg @ref LL_RCC_PLLI2SM_DIV_55 - * @arg @ref LL_RCC_PLLI2SM_DIV_56 - * @arg @ref LL_RCC_PLLI2SM_DIV_57 - * @arg @ref LL_RCC_PLLI2SM_DIV_58 - * @arg @ref LL_RCC_PLLI2SM_DIV_59 - * @arg @ref LL_RCC_PLLI2SM_DIV_60 - * @arg @ref LL_RCC_PLLI2SM_DIV_61 - * @arg @ref LL_RCC_PLLI2SM_DIV_62 - * @arg @ref LL_RCC_PLLI2SM_DIV_63 - * @param __PLLI2SN__ Between 50 and 432 - * @param __PLLI2SQ__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SQ_DIV_2 - * @arg @ref LL_RCC_PLLI2SQ_DIV_3 - * @arg @ref LL_RCC_PLLI2SQ_DIV_4 - * @arg @ref LL_RCC_PLLI2SQ_DIV_5 - * @arg @ref LL_RCC_PLLI2SQ_DIV_6 - * @arg @ref LL_RCC_PLLI2SQ_DIV_7 - * @arg @ref LL_RCC_PLLI2SQ_DIV_8 - * @arg @ref LL_RCC_PLLI2SQ_DIV_9 - * @arg @ref LL_RCC_PLLI2SQ_DIV_10 - * @arg @ref LL_RCC_PLLI2SQ_DIV_11 - * @arg @ref LL_RCC_PLLI2SQ_DIV_12 - * @arg @ref LL_RCC_PLLI2SQ_DIV_13 - * @arg @ref LL_RCC_PLLI2SQ_DIV_14 - * @arg @ref LL_RCC_PLLI2SQ_DIV_15 - * @retval PLLI2S clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLI2S_48M_FREQ(__INPUTFREQ__, __PLLM__, __PLLI2SN__, __PLLI2SQ__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLI2SN__) / \ - ((__PLLI2SQ__) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos)) - -#endif /* RCC_PLLI2SCFGR_PLLI2SQ && !RCC_DCKCFGR_PLLI2SDIVQ */ -#endif /* RCC_PLLI2S_SUPPORT */ - -/** - * @brief Helper macro to calculate the HCLK frequency - * @param __SYSCLKFREQ__ SYSCLK frequency (based on HSE/HSI/PLLCLK) - * @param __AHBPRESCALER__ This parameter can be one of the following values: - * @arg @ref LL_RCC_SYSCLK_DIV_1 - * @arg @ref LL_RCC_SYSCLK_DIV_2 - * @arg @ref LL_RCC_SYSCLK_DIV_4 - * @arg @ref LL_RCC_SYSCLK_DIV_8 - * @arg @ref LL_RCC_SYSCLK_DIV_16 - * @arg @ref LL_RCC_SYSCLK_DIV_64 - * @arg @ref LL_RCC_SYSCLK_DIV_128 - * @arg @ref LL_RCC_SYSCLK_DIV_256 - * @arg @ref LL_RCC_SYSCLK_DIV_512 - * @retval HCLK clock frequency (in Hz) - */ -#define __LL_RCC_CALC_HCLK_FREQ(__SYSCLKFREQ__, __AHBPRESCALER__) ((__SYSCLKFREQ__) >> AHBPrescTable[((__AHBPRESCALER__) & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos]) - -/** - * @brief Helper macro to calculate the PCLK1 frequency (ABP1) - * @param __HCLKFREQ__ HCLK frequency - * @param __APB1PRESCALER__ This parameter can be one of the following values: - * @arg @ref LL_RCC_APB1_DIV_1 - * @arg @ref LL_RCC_APB1_DIV_2 - * @arg @ref LL_RCC_APB1_DIV_4 - * @arg @ref LL_RCC_APB1_DIV_8 - * @arg @ref LL_RCC_APB1_DIV_16 - * @retval PCLK1 clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PCLK1_FREQ(__HCLKFREQ__, __APB1PRESCALER__) ((__HCLKFREQ__) >> APBPrescTable[(__APB1PRESCALER__) >> RCC_CFGR_PPRE1_Pos]) - -/** - * @brief Helper macro to calculate the PCLK2 frequency (ABP2) - * @param __HCLKFREQ__ HCLK frequency - * @param __APB2PRESCALER__ This parameter can be one of the following values: - * @arg @ref LL_RCC_APB2_DIV_1 - * @arg @ref LL_RCC_APB2_DIV_2 - * @arg @ref LL_RCC_APB2_DIV_4 - * @arg @ref LL_RCC_APB2_DIV_8 - * @arg @ref LL_RCC_APB2_DIV_16 - * @retval PCLK2 clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PCLK2_FREQ(__HCLKFREQ__, __APB2PRESCALER__) ((__HCLKFREQ__) >> APBPrescTable[(__APB2PRESCALER__) >> RCC_CFGR_PPRE2_Pos]) - -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup RCC_LL_Exported_Functions RCC Exported Functions - * @{ - */ - -/** @defgroup RCC_LL_EF_HSE HSE - * @{ - */ - -/** - * @brief Enable the Clock Security System. - * @rmtoll CR CSSON LL_RCC_HSE_EnableCSS - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSE_EnableCSS(void) -{ - SET_BIT(RCC->CR, RCC_CR_CSSON); -} - -/** - * @brief Enable HSE external oscillator (HSE Bypass) - * @rmtoll CR HSEBYP LL_RCC_HSE_EnableBypass - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSE_EnableBypass(void) -{ - SET_BIT(RCC->CR, RCC_CR_HSEBYP); -} - -/** - * @brief Disable HSE external oscillator (HSE Bypass) - * @rmtoll CR HSEBYP LL_RCC_HSE_DisableBypass - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSE_DisableBypass(void) -{ - CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); -} - -/** - * @brief Enable HSE crystal oscillator (HSE ON) - * @rmtoll CR HSEON LL_RCC_HSE_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSE_Enable(void) -{ - SET_BIT(RCC->CR, RCC_CR_HSEON); -} - -/** - * @brief Disable HSE crystal oscillator (HSE ON) - * @rmtoll CR HSEON LL_RCC_HSE_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSE_Disable(void) -{ - CLEAR_BIT(RCC->CR, RCC_CR_HSEON); -} - -/** - * @brief Check if HSE oscillator Ready - * @rmtoll CR HSERDY LL_RCC_HSE_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_HSE_IsReady(void) -{ - return (READ_BIT(RCC->CR, RCC_CR_HSERDY) == (RCC_CR_HSERDY)); -} - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_HSI HSI - * @{ - */ - -/** - * @brief Enable HSI oscillator - * @rmtoll CR HSION LL_RCC_HSI_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSI_Enable(void) -{ - SET_BIT(RCC->CR, RCC_CR_HSION); -} - -/** - * @brief Disable HSI oscillator - * @rmtoll CR HSION LL_RCC_HSI_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSI_Disable(void) -{ - CLEAR_BIT(RCC->CR, RCC_CR_HSION); -} - -/** - * @brief Check if HSI clock is ready - * @rmtoll CR HSIRDY LL_RCC_HSI_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_HSI_IsReady(void) -{ - return (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == (RCC_CR_HSIRDY)); -} - -/** - * @brief Get HSI Calibration value - * @note When HSITRIM is written, HSICAL is updated with the sum of - * HSITRIM and the factory trim value - * @rmtoll CR HSICAL LL_RCC_HSI_GetCalibration - * @retval Between Min_Data = 0x00 and Max_Data = 0xFF - */ -__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibration(void) -{ - return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSICAL) >> RCC_CR_HSICAL_Pos); -} - -/** - * @brief Set HSI Calibration trimming - * @note user-programmable trimming value that is added to the HSICAL - * @note Default value is 16, which, when added to the HSICAL value, - * should trim the HSI to 16 MHz +/- 1 % - * @rmtoll CR HSITRIM LL_RCC_HSI_SetCalibTrimming - * @param Value Between Min_Data = 0 and Max_Data = 31 - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSI_SetCalibTrimming(uint32_t Value) -{ - MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, Value << RCC_CR_HSITRIM_Pos); -} - -/** - * @brief Get HSI Calibration trimming - * @rmtoll CR HSITRIM LL_RCC_HSI_GetCalibTrimming - * @retval Between Min_Data = 0 and Max_Data = 31 - */ -__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibTrimming(void) -{ - return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos); -} - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_LSE LSE - * @{ - */ - -/** - * @brief Enable Low Speed External (LSE) crystal. - * @rmtoll BDCR LSEON LL_RCC_LSE_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSE_Enable(void) -{ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); -} - -/** - * @brief Disable Low Speed External (LSE) crystal. - * @rmtoll BDCR LSEON LL_RCC_LSE_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSE_Disable(void) -{ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); -} - -/** - * @brief Enable external clock source (LSE bypass). - * @rmtoll BDCR LSEBYP LL_RCC_LSE_EnableBypass - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSE_EnableBypass(void) -{ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); -} - -/** - * @brief Disable external clock source (LSE bypass). - * @rmtoll BDCR LSEBYP LL_RCC_LSE_DisableBypass - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSE_DisableBypass(void) -{ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); -} - -/** - * @brief Check if LSE oscillator Ready - * @rmtoll BDCR LSERDY LL_RCC_LSE_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_LSE_IsReady(void) -{ - return (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == (RCC_BDCR_LSERDY)); -} - -#if defined(RCC_BDCR_LSEMOD) -/** - * @brief Enable LSE high drive mode. - * @note LSE high drive mode can be enabled only when the LSE clock is disabled - * @rmtoll BDCR LSEMOD LL_RCC_LSE_EnableHighDriveMode - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSE_EnableHighDriveMode(void) -{ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEMOD); -} - -/** - * @brief Disable LSE high drive mode. - * @note LSE high drive mode can be disabled only when the LSE clock is disabled - * @rmtoll BDCR LSEMOD LL_RCC_LSE_DisableHighDriveMode - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSE_DisableHighDriveMode(void) -{ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEMOD); -} -#endif /* RCC_BDCR_LSEMOD */ - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_LSI LSI - * @{ - */ - -/** - * @brief Enable LSI Oscillator - * @rmtoll CSR LSION LL_RCC_LSI_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSI_Enable(void) -{ - SET_BIT(RCC->CSR, RCC_CSR_LSION); -} - -/** - * @brief Disable LSI Oscillator - * @rmtoll CSR LSION LL_RCC_LSI_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_LSI_Disable(void) -{ - CLEAR_BIT(RCC->CSR, RCC_CSR_LSION); -} - -/** - * @brief Check if LSI is Ready - * @rmtoll CSR LSIRDY LL_RCC_LSI_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_LSI_IsReady(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == (RCC_CSR_LSIRDY)); -} - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_System System - * @{ - */ - -/** - * @brief Configure the system clock source - * @rmtoll CFGR SW LL_RCC_SetSysClkSource - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_SYS_CLKSOURCE_HSI - * @arg @ref LL_RCC_SYS_CLKSOURCE_HSE - * @arg @ref LL_RCC_SYS_CLKSOURCE_PLL - * @arg @ref LL_RCC_SYS_CLKSOURCE_PLLR (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetSysClkSource(uint32_t Source) -{ - MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, Source); -} - -/** - * @brief Get the system clock source - * @rmtoll CFGR SWS LL_RCC_GetSysClkSource - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSI - * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSE - * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_PLL - * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_PLLR (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetSysClkSource(void) -{ - return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS)); -} - -/** - * @brief Set AHB prescaler - * @rmtoll CFGR HPRE LL_RCC_SetAHBPrescaler - * @param Prescaler This parameter can be one of the following values: - * @arg @ref LL_RCC_SYSCLK_DIV_1 - * @arg @ref LL_RCC_SYSCLK_DIV_2 - * @arg @ref LL_RCC_SYSCLK_DIV_4 - * @arg @ref LL_RCC_SYSCLK_DIV_8 - * @arg @ref LL_RCC_SYSCLK_DIV_16 - * @arg @ref LL_RCC_SYSCLK_DIV_64 - * @arg @ref LL_RCC_SYSCLK_DIV_128 - * @arg @ref LL_RCC_SYSCLK_DIV_256 - * @arg @ref LL_RCC_SYSCLK_DIV_512 - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetAHBPrescaler(uint32_t Prescaler) -{ - MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, Prescaler); -} - -/** - * @brief Set APB1 prescaler - * @rmtoll CFGR PPRE1 LL_RCC_SetAPB1Prescaler - * @param Prescaler This parameter can be one of the following values: - * @arg @ref LL_RCC_APB1_DIV_1 - * @arg @ref LL_RCC_APB1_DIV_2 - * @arg @ref LL_RCC_APB1_DIV_4 - * @arg @ref LL_RCC_APB1_DIV_8 - * @arg @ref LL_RCC_APB1_DIV_16 - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetAPB1Prescaler(uint32_t Prescaler) -{ - MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, Prescaler); -} - -/** - * @brief Set APB2 prescaler - * @rmtoll CFGR PPRE2 LL_RCC_SetAPB2Prescaler - * @param Prescaler This parameter can be one of the following values: - * @arg @ref LL_RCC_APB2_DIV_1 - * @arg @ref LL_RCC_APB2_DIV_2 - * @arg @ref LL_RCC_APB2_DIV_4 - * @arg @ref LL_RCC_APB2_DIV_8 - * @arg @ref LL_RCC_APB2_DIV_16 - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetAPB2Prescaler(uint32_t Prescaler) -{ - MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, Prescaler); -} - -/** - * @brief Get AHB prescaler - * @rmtoll CFGR HPRE LL_RCC_GetAHBPrescaler - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_SYSCLK_DIV_1 - * @arg @ref LL_RCC_SYSCLK_DIV_2 - * @arg @ref LL_RCC_SYSCLK_DIV_4 - * @arg @ref LL_RCC_SYSCLK_DIV_8 - * @arg @ref LL_RCC_SYSCLK_DIV_16 - * @arg @ref LL_RCC_SYSCLK_DIV_64 - * @arg @ref LL_RCC_SYSCLK_DIV_128 - * @arg @ref LL_RCC_SYSCLK_DIV_256 - * @arg @ref LL_RCC_SYSCLK_DIV_512 - */ -__STATIC_INLINE uint32_t LL_RCC_GetAHBPrescaler(void) -{ - return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_HPRE)); -} - -/** - * @brief Get APB1 prescaler - * @rmtoll CFGR PPRE1 LL_RCC_GetAPB1Prescaler - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_APB1_DIV_1 - * @arg @ref LL_RCC_APB1_DIV_2 - * @arg @ref LL_RCC_APB1_DIV_4 - * @arg @ref LL_RCC_APB1_DIV_8 - * @arg @ref LL_RCC_APB1_DIV_16 - */ -__STATIC_INLINE uint32_t LL_RCC_GetAPB1Prescaler(void) -{ - return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE1)); -} - -/** - * @brief Get APB2 prescaler - * @rmtoll CFGR PPRE2 LL_RCC_GetAPB2Prescaler - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_APB2_DIV_1 - * @arg @ref LL_RCC_APB2_DIV_2 - * @arg @ref LL_RCC_APB2_DIV_4 - * @arg @ref LL_RCC_APB2_DIV_8 - * @arg @ref LL_RCC_APB2_DIV_16 - */ -__STATIC_INLINE uint32_t LL_RCC_GetAPB2Prescaler(void) -{ - return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE2)); -} - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_MCO MCO - * @{ - */ - -#if defined(RCC_CFGR_MCO1EN) -/** - * @brief Enable MCO1 output - * @rmtoll CFGR RCC_CFGR_MCO1EN LL_RCC_MCO1_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_MCO1_Enable(void) -{ - SET_BIT(RCC->CFGR, RCC_CFGR_MCO1EN); -} - -/** - * @brief Disable MCO1 output - * @rmtoll CFGR RCC_CFGR_MCO1EN LL_RCC_MCO1_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_MCO1_Disable(void) -{ - CLEAR_BIT(RCC->CFGR, RCC_CFGR_MCO1EN); -} -#endif /* RCC_CFGR_MCO1EN */ - -#if defined(RCC_CFGR_MCO2EN) -/** - * @brief Enable MCO2 output - * @rmtoll CFGR RCC_CFGR_MCO2EN LL_RCC_MCO2_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_MCO2_Enable(void) -{ - SET_BIT(RCC->CFGR, RCC_CFGR_MCO2EN); -} - -/** - * @brief Disable MCO2 output - * @rmtoll CFGR RCC_CFGR_MCO2EN LL_RCC_MCO2_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_MCO2_Disable(void) -{ - CLEAR_BIT(RCC->CFGR, RCC_CFGR_MCO2EN); -} -#endif /* RCC_CFGR_MCO2EN */ - -/** - * @brief Configure MCOx - * @rmtoll CFGR MCO1 LL_RCC_ConfigMCO\n - * CFGR MCO1PRE LL_RCC_ConfigMCO\n - * CFGR MCO2 LL_RCC_ConfigMCO\n - * CFGR MCO2PRE LL_RCC_ConfigMCO - * @param MCOxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_MCO1SOURCE_HSI - * @arg @ref LL_RCC_MCO1SOURCE_LSE - * @arg @ref LL_RCC_MCO1SOURCE_HSE - * @arg @ref LL_RCC_MCO1SOURCE_PLLCLK - * @arg @ref LL_RCC_MCO2SOURCE_SYSCLK - * @arg @ref LL_RCC_MCO2SOURCE_PLLI2S - * @arg @ref LL_RCC_MCO2SOURCE_HSE - * @arg @ref LL_RCC_MCO2SOURCE_PLLCLK - * @param MCOxPrescaler This parameter can be one of the following values: - * @arg @ref LL_RCC_MCO1_DIV_1 - * @arg @ref LL_RCC_MCO1_DIV_2 - * @arg @ref LL_RCC_MCO1_DIV_3 - * @arg @ref LL_RCC_MCO1_DIV_4 - * @arg @ref LL_RCC_MCO1_DIV_5 - * @arg @ref LL_RCC_MCO2_DIV_1 - * @arg @ref LL_RCC_MCO2_DIV_2 - * @arg @ref LL_RCC_MCO2_DIV_3 - * @arg @ref LL_RCC_MCO2_DIV_4 - * @arg @ref LL_RCC_MCO2_DIV_5 - * @retval None - */ -__STATIC_INLINE void LL_RCC_ConfigMCO(uint32_t MCOxSource, uint32_t MCOxPrescaler) -{ - MODIFY_REG(RCC->CFGR, (MCOxSource & 0xFFFF0000U) | (MCOxPrescaler & 0xFFFF0000U), (MCOxSource << 16U) | (MCOxPrescaler << 16U)); -} - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_Peripheral_Clock_Source Peripheral Clock Source - * @{ - */ -#if defined(FMPI2C1) -/** - * @brief Configure FMPI2C clock source - * @rmtoll DCKCFGR2 FMPI2C1SEL LL_RCC_SetFMPI2CClockSource - * @param FMPI2CxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE_PCLK1 - * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE_SYSCLK - * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE_HSI - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetFMPI2CClockSource(uint32_t FMPI2CxSource) -{ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, FMPI2CxSource); -} -#endif /* FMPI2C1 */ - -#if defined(LPTIM1) -/** - * @brief Configure LPTIMx clock source - * @rmtoll DCKCFGR2 LPTIM1SEL LL_RCC_SetLPTIMClockSource - * @param LPTIMxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_HSI - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetLPTIMClockSource(uint32_t LPTIMxSource) -{ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL, LPTIMxSource); -} -#endif /* LPTIM1 */ - -#if defined(SAI1) -/** - * @brief Configure SAIx clock source - * @rmtoll DCKCFGR SAI1SRC LL_RCC_SetSAIClockSource\n - * DCKCFGR SAI2SRC LL_RCC_SetSAIClockSource\n - * DCKCFGR SAI1ASRC LL_RCC_SetSAIClockSource\n - * DCKCFGR SAI1BSRC LL_RCC_SetSAIClockSource - * @param SAIxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_SAI1_CLKSOURCE_PIN (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSRC (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PIN (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLLSRC (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PIN (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLLSRC (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetSAIClockSource(uint32_t SAIxSource) -{ - MODIFY_REG(RCC->DCKCFGR, (SAIxSource & 0xFFFF0000U), (SAIxSource << 16U)); -} -#endif /* SAI1 */ - -#if defined(RCC_DCKCFGR_SDIOSEL) || defined(RCC_DCKCFGR2_SDIOSEL) -/** - * @brief Configure SDIO clock source - * @rmtoll DCKCFGR SDIOSEL LL_RCC_SetSDIOClockSource\n - * DCKCFGR2 SDIOSEL LL_RCC_SetSDIOClockSource - * @param SDIOxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_SDIO_CLKSOURCE_PLL48CLK - * @arg @ref LL_RCC_SDIO_CLKSOURCE_SYSCLK - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetSDIOClockSource(uint32_t SDIOxSource) -{ -#if defined(RCC_DCKCFGR_SDIOSEL) - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SDIOSEL, SDIOxSource); -#else - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL, SDIOxSource); -#endif /* RCC_DCKCFGR_SDIOSEL */ -} -#endif /* RCC_DCKCFGR_SDIOSEL || RCC_DCKCFGR2_SDIOSEL */ - -#if defined(RCC_DCKCFGR_CK48MSEL) || defined(RCC_DCKCFGR2_CK48MSEL) -/** - * @brief Configure 48Mhz domain clock source - * @rmtoll DCKCFGR CK48MSEL LL_RCC_SetCK48MClockSource\n - * DCKCFGR2 CK48MSEL LL_RCC_SetCK48MClockSource - * @param CK48MxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLL - * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLLI2S (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetCK48MClockSource(uint32_t CK48MxSource) -{ -#if defined(RCC_DCKCFGR_CK48MSEL) - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CK48MSEL, CK48MxSource); -#else - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, CK48MxSource); -#endif /* RCC_DCKCFGR_CK48MSEL */ -} - -#if defined(RNG) -/** - * @brief Configure RNG clock source - * @rmtoll DCKCFGR CK48MSEL LL_RCC_SetRNGClockSource\n - * DCKCFGR2 CK48MSEL LL_RCC_SetRNGClockSource - * @param RNGxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_RNG_CLKSOURCE_PLL - * @arg @ref LL_RCC_RNG_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_RNG_CLKSOURCE_PLLI2S (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetRNGClockSource(uint32_t RNGxSource) -{ -#if defined(RCC_DCKCFGR_CK48MSEL) - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CK48MSEL, RNGxSource); -#else - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, RNGxSource); -#endif /* RCC_DCKCFGR_CK48MSEL */ -} -#endif /* RNG */ - -#if defined(USB_OTG_FS) || defined(USB_OTG_HS) -/** - * @brief Configure USB clock source - * @rmtoll DCKCFGR CK48MSEL LL_RCC_SetUSBClockSource\n - * DCKCFGR2 CK48MSEL LL_RCC_SetUSBClockSource - * @param USBxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_USB_CLKSOURCE_PLL - * @arg @ref LL_RCC_USB_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_USB_CLKSOURCE_PLLI2S (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetUSBClockSource(uint32_t USBxSource) -{ -#if defined(RCC_DCKCFGR_CK48MSEL) - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CK48MSEL, USBxSource); -#else - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, USBxSource); -#endif /* RCC_DCKCFGR_CK48MSEL */ -} -#endif /* USB_OTG_FS || USB_OTG_HS */ -#endif /* RCC_DCKCFGR_CK48MSEL || RCC_DCKCFGR2_CK48MSEL */ - -#if defined(CEC) -/** - * @brief Configure CEC clock source - * @rmtoll DCKCFGR2 CECSEL LL_RCC_SetCECClockSource - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_CEC_CLKSOURCE_HSI_DIV488 - * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetCECClockSource(uint32_t Source) -{ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL, Source); -} -#endif /* CEC */ - -/** - * @brief Configure I2S clock source - * @rmtoll CFGR I2SSRC LL_RCC_SetI2SClockSource\n - * DCKCFGR I2SSRC LL_RCC_SetI2SClockSource\n - * DCKCFGR I2S1SRC LL_RCC_SetI2SClockSource\n - * DCKCFGR I2S2SRC LL_RCC_SetI2SClockSource - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_I2S1_CLKSOURCE_PIN - * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLLSRC (*) - * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_I2S2_CLKSOURCE_PIN (*) - * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLLSRC (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetI2SClockSource(uint32_t Source) -{ -#if defined(RCC_CFGR_I2SSRC) - MODIFY_REG(RCC->CFGR, RCC_CFGR_I2SSRC, Source); -#else - MODIFY_REG(RCC->DCKCFGR, (Source & 0xFFFF0000U), (Source << 16U)); -#endif /* RCC_CFGR_I2SSRC */ -} - -#if defined(DSI) -/** - * @brief Configure DSI clock source - * @rmtoll DCKCFGR DSISEL LL_RCC_SetDSIClockSource - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_DSI_CLKSOURCE_PHY - * @arg @ref LL_RCC_DSI_CLKSOURCE_PLL - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetDSIClockSource(uint32_t Source) -{ - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_DSISEL, Source); -} -#endif /* DSI */ - -#if defined(DFSDM1_Channel0) -/** - * @brief Configure DFSDM Audio clock source - * @rmtoll DCKCFGR CKDFSDM1ASEL LL_RCC_SetDFSDMAudioClockSource\n - * DCKCFGR CKDFSDM2ASEL LL_RCC_SetDFSDMAudioClockSource - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_I2S1 - * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_I2S2 - * @arg @ref LL_RCC_DFSDM2_AUDIO_CLKSOURCE_I2S1 (*) - * @arg @ref LL_RCC_DFSDM2_AUDIO_CLKSOURCE_I2S2 (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetDFSDMAudioClockSource(uint32_t Source) -{ - MODIFY_REG(RCC->DCKCFGR, (Source & 0x0000FFFFU), (Source >> 16U)); -} - -/** - * @brief Configure DFSDM Kernel clock source - * @rmtoll DCKCFGR CKDFSDM1SEL LL_RCC_SetDFSDMClockSource - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_PCLK2 - * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_SYSCLK - * @arg @ref LL_RCC_DFSDM2_CLKSOURCE_PCLK2 (*) - * @arg @ref LL_RCC_DFSDM2_CLKSOURCE_SYSCLK (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetDFSDMClockSource(uint32_t Source) -{ - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL, Source); -} -#endif /* DFSDM1_Channel0 */ - -#if defined(SPDIFRX) -/** - * @brief Configure SPDIFRX clock source - * @rmtoll DCKCFGR2 SPDIFRXSEL LL_RCC_SetSPDIFRXClockSource - * @param SPDIFRXxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_SPDIFRX1_CLKSOURCE_PLL - * @arg @ref LL_RCC_SPDIFRX1_CLKSOURCE_PLLI2S - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetSPDIFRXClockSource(uint32_t SPDIFRXxSource) -{ - MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SPDIFRXSEL, SPDIFRXxSource); -} -#endif /* SPDIFRX */ - -#if defined(FMPI2C1) -/** - * @brief Get FMPI2C clock source - * @rmtoll DCKCFGR2 FMPI2C1SEL LL_RCC_GetFMPI2CClockSource - * @param FMPI2Cx This parameter can be one of the following values: - * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE_PCLK1 - * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE_SYSCLK - * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE_HSI - */ -__STATIC_INLINE uint32_t LL_RCC_GetFMPI2CClockSource(uint32_t FMPI2Cx) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR2, FMPI2Cx)); -} -#endif /* FMPI2C1 */ - -#if defined(LPTIM1) -/** - * @brief Get LPTIMx clock source - * @rmtoll DCKCFGR2 LPTIM1SEL LL_RCC_GetLPTIMClockSource - * @param LPTIMx This parameter can be one of the following values: - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_HSI - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI - * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE - */ -__STATIC_INLINE uint32_t LL_RCC_GetLPTIMClockSource(uint32_t LPTIMx) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL)); -} -#endif /* LPTIM1 */ - -#if defined(SAI1) -/** - * @brief Get SAIx clock source - * @rmtoll DCKCFGR SAI1SEL LL_RCC_GetSAIClockSource\n - * DCKCFGR SAI2SEL LL_RCC_GetSAIClockSource\n - * DCKCFGR SAI1ASRC LL_RCC_GetSAIClockSource\n - * DCKCFGR SAI1BSRC LL_RCC_GetSAIClockSource - * @param SAIx This parameter can be one of the following values: - * @arg @ref LL_RCC_SAI1_CLKSOURCE (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE (*) - * - * (*) value not defined in all devices. - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_SAI1_CLKSOURCE_PIN (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSRC (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PIN (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLLSRC (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PIN (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLLSRC (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetSAIClockSource(uint32_t SAIx) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, SAIx) >> 16U | SAIx); -} -#endif /* SAI1 */ - -#if defined(RCC_DCKCFGR_SDIOSEL) || defined(RCC_DCKCFGR2_SDIOSEL) -/** - * @brief Get SDIOx clock source - * @rmtoll DCKCFGR SDIOSEL LL_RCC_GetSDIOClockSource\n - * DCKCFGR2 SDIOSEL LL_RCC_GetSDIOClockSource - * @param SDIOx This parameter can be one of the following values: - * @arg @ref LL_RCC_SDIO_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_SDIO_CLKSOURCE_PLL48CLK - * @arg @ref LL_RCC_SDIO_CLKSOURCE_SYSCLK - */ -__STATIC_INLINE uint32_t LL_RCC_GetSDIOClockSource(uint32_t SDIOx) -{ -#if defined(RCC_DCKCFGR_SDIOSEL) - return (uint32_t)(READ_BIT(RCC->DCKCFGR, SDIOx)); -#else - return (uint32_t)(READ_BIT(RCC->DCKCFGR2, SDIOx)); -#endif /* RCC_DCKCFGR_SDIOSEL */ -} -#endif /* RCC_DCKCFGR_SDIOSEL || RCC_DCKCFGR2_SDIOSEL */ - -#if defined(RCC_DCKCFGR_CK48MSEL) || defined(RCC_DCKCFGR2_CK48MSEL) -/** - * @brief Get 48Mhz domain clock source - * @rmtoll DCKCFGR CK48MSEL LL_RCC_GetCK48MClockSource\n - * DCKCFGR2 CK48MSEL LL_RCC_GetCK48MClockSource - * @param CK48Mx This parameter can be one of the following values: - * @arg @ref LL_RCC_CK48M_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLL - * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLLI2S (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetCK48MClockSource(uint32_t CK48Mx) -{ -#if defined(RCC_DCKCFGR_CK48MSEL) - return (uint32_t)(READ_BIT(RCC->DCKCFGR, CK48Mx)); -#else - return (uint32_t)(READ_BIT(RCC->DCKCFGR2, CK48Mx)); -#endif /* RCC_DCKCFGR_CK48MSEL */ -} - -#if defined(RNG) -/** - * @brief Get RNGx clock source - * @rmtoll DCKCFGR CK48MSEL LL_RCC_GetRNGClockSource\n - * DCKCFGR2 CK48MSEL LL_RCC_GetRNGClockSource - * @param RNGx This parameter can be one of the following values: - * @arg @ref LL_RCC_RNG_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_RNG_CLKSOURCE_PLL - * @arg @ref LL_RCC_RNG_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_RNG_CLKSOURCE_PLLI2S (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetRNGClockSource(uint32_t RNGx) -{ -#if defined(RCC_DCKCFGR_CK48MSEL) - return (uint32_t)(READ_BIT(RCC->DCKCFGR, RNGx)); -#else - return (uint32_t)(READ_BIT(RCC->DCKCFGR2, RNGx)); -#endif /* RCC_DCKCFGR_CK48MSEL */ -} -#endif /* RNG */ - -#if defined(USB_OTG_FS) || defined(USB_OTG_HS) -/** - * @brief Get USBx clock source - * @rmtoll DCKCFGR CK48MSEL LL_RCC_GetUSBClockSource\n - * DCKCFGR2 CK48MSEL LL_RCC_GetUSBClockSource - * @param USBx This parameter can be one of the following values: - * @arg @ref LL_RCC_USB_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_USB_CLKSOURCE_PLL - * @arg @ref LL_RCC_USB_CLKSOURCE_PLLSAI (*) - * @arg @ref LL_RCC_USB_CLKSOURCE_PLLI2S (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetUSBClockSource(uint32_t USBx) -{ -#if defined(RCC_DCKCFGR_CK48MSEL) - return (uint32_t)(READ_BIT(RCC->DCKCFGR, USBx)); -#else - return (uint32_t)(READ_BIT(RCC->DCKCFGR2, USBx)); -#endif /* RCC_DCKCFGR_CK48MSEL */ -} -#endif /* USB_OTG_FS || USB_OTG_HS */ -#endif /* RCC_DCKCFGR_CK48MSEL || RCC_DCKCFGR2_CK48MSEL */ - -#if defined(CEC) -/** - * @brief Get CEC Clock Source - * @rmtoll DCKCFGR2 CECSEL LL_RCC_GetCECClockSource - * @param CECx This parameter can be one of the following values: - * @arg @ref LL_RCC_CEC_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_CEC_CLKSOURCE_HSI_DIV488 - * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE - */ -__STATIC_INLINE uint32_t LL_RCC_GetCECClockSource(uint32_t CECx) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR2, CECx)); -} -#endif /* CEC */ - -/** - * @brief Get I2S Clock Source - * @rmtoll CFGR I2SSRC LL_RCC_GetI2SClockSource\n - * DCKCFGR I2SSRC LL_RCC_GetI2SClockSource\n - * DCKCFGR I2S1SRC LL_RCC_GetI2SClockSource\n - * DCKCFGR I2S2SRC LL_RCC_GetI2SClockSource - * @param I2Sx This parameter can be one of the following values: - * @arg @ref LL_RCC_I2S1_CLKSOURCE - * @arg @ref LL_RCC_I2S2_CLKSOURCE (*) - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_I2S1_CLKSOURCE_PIN - * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLLSRC (*) - * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLLI2S (*) - * @arg @ref LL_RCC_I2S2_CLKSOURCE_PIN (*) - * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLL (*) - * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLLSRC (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetI2SClockSource(uint32_t I2Sx) -{ -#if defined(RCC_CFGR_I2SSRC) - return (uint32_t)(READ_BIT(RCC->CFGR, I2Sx)); -#else - return (uint32_t)(READ_BIT(RCC->DCKCFGR, I2Sx) >> 16U | I2Sx); -#endif /* RCC_CFGR_I2SSRC */ -} - -#if defined(DFSDM1_Channel0) -/** - * @brief Get DFSDM Audio Clock Source - * @rmtoll DCKCFGR CKDFSDM1ASEL LL_RCC_GetDFSDMAudioClockSource\n - * DCKCFGR CKDFSDM2ASEL LL_RCC_GetDFSDMAudioClockSource - * @param DFSDMx This parameter can be one of the following values: - * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE - * @arg @ref LL_RCC_DFSDM2_AUDIO_CLKSOURCE (*) - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_I2S1 - * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_I2S2 - * @arg @ref LL_RCC_DFSDM2_AUDIO_CLKSOURCE_I2S1 (*) - * @arg @ref LL_RCC_DFSDM2_AUDIO_CLKSOURCE_I2S2 (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetDFSDMAudioClockSource(uint32_t DFSDMx) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, DFSDMx) << 16U | DFSDMx); -} - -/** - * @brief Get DFSDM Audio Clock Source - * @rmtoll DCKCFGR CKDFSDM1SEL LL_RCC_GetDFSDMClockSource - * @param DFSDMx This parameter can be one of the following values: - * @arg @ref LL_RCC_DFSDM1_CLKSOURCE - * @arg @ref LL_RCC_DFSDM2_CLKSOURCE (*) - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_PCLK2 - * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_SYSCLK - * @arg @ref LL_RCC_DFSDM2_CLKSOURCE_PCLK2 (*) - * @arg @ref LL_RCC_DFSDM2_CLKSOURCE_SYSCLK (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetDFSDMClockSource(uint32_t DFSDMx) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, DFSDMx)); -} -#endif /* DFSDM1_Channel0 */ - -#if defined(SPDIFRX) -/** - * @brief Get SPDIFRX clock source - * @rmtoll DCKCFGR2 SPDIFRXSEL LL_RCC_GetSPDIFRXClockSource - * @param SPDIFRXx This parameter can be one of the following values: - * @arg @ref LL_RCC_SPDIFRX1_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_SPDIFRX1_CLKSOURCE_PLL - * @arg @ref LL_RCC_SPDIFRX1_CLKSOURCE_PLLI2S - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_GetSPDIFRXClockSource(uint32_t SPDIFRXx) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR2, SPDIFRXx)); -} -#endif /* SPDIFRX */ - -#if defined(DSI) -/** - * @brief Get DSI Clock Source - * @rmtoll DCKCFGR DSISEL LL_RCC_GetDSIClockSource - * @param DSIx This parameter can be one of the following values: - * @arg @ref LL_RCC_DSI_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_DSI_CLKSOURCE_PHY - * @arg @ref LL_RCC_DSI_CLKSOURCE_PLL - */ -__STATIC_INLINE uint32_t LL_RCC_GetDSIClockSource(uint32_t DSIx) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, DSIx)); -} -#endif /* DSI */ - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_RTC RTC - * @{ - */ - -/** - * @brief Set RTC Clock Source - * @note Once the RTC clock source has been selected, it cannot be changed anymore unless - * the Backup domain is reset, or unless a failure is detected on LSE (LSECSSD is - * set). The BDRST bit can be used to reset them. - * @rmtoll BDCR RTCSEL LL_RCC_SetRTCClockSource - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE - * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE - * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI - * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetRTCClockSource(uint32_t Source) -{ - MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, Source); -} - -/** - * @brief Get RTC Clock Source - * @rmtoll BDCR RTCSEL LL_RCC_GetRTCClockSource - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE - * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE - * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI - * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE - */ -__STATIC_INLINE uint32_t LL_RCC_GetRTCClockSource(void) -{ - return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)); -} - -/** - * @brief Enable RTC - * @rmtoll BDCR RTCEN LL_RCC_EnableRTC - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableRTC(void) -{ - SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN); -} - -/** - * @brief Disable RTC - * @rmtoll BDCR RTCEN LL_RCC_DisableRTC - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableRTC(void) -{ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN); -} - -/** - * @brief Check if RTC has been enabled or not - * @rmtoll BDCR RTCEN LL_RCC_IsEnabledRTC - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledRTC(void) -{ - return (READ_BIT(RCC->BDCR, RCC_BDCR_RTCEN) == (RCC_BDCR_RTCEN)); -} - -/** - * @brief Force the Backup domain reset - * @rmtoll BDCR BDRST LL_RCC_ForceBackupDomainReset - * @retval None - */ -__STATIC_INLINE void LL_RCC_ForceBackupDomainReset(void) -{ - SET_BIT(RCC->BDCR, RCC_BDCR_BDRST); -} - -/** - * @brief Release the Backup domain reset - * @rmtoll BDCR BDRST LL_RCC_ReleaseBackupDomainReset - * @retval None - */ -__STATIC_INLINE void LL_RCC_ReleaseBackupDomainReset(void) -{ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST); -} - -/** - * @brief Set HSE Prescalers for RTC Clock - * @rmtoll CFGR RTCPRE LL_RCC_SetRTC_HSEPrescaler - * @param Prescaler This parameter can be one of the following values: - * @arg @ref LL_RCC_RTC_NOCLOCK - * @arg @ref LL_RCC_RTC_HSE_DIV_2 - * @arg @ref LL_RCC_RTC_HSE_DIV_3 - * @arg @ref LL_RCC_RTC_HSE_DIV_4 - * @arg @ref LL_RCC_RTC_HSE_DIV_5 - * @arg @ref LL_RCC_RTC_HSE_DIV_6 - * @arg @ref LL_RCC_RTC_HSE_DIV_7 - * @arg @ref LL_RCC_RTC_HSE_DIV_8 - * @arg @ref LL_RCC_RTC_HSE_DIV_9 - * @arg @ref LL_RCC_RTC_HSE_DIV_10 - * @arg @ref LL_RCC_RTC_HSE_DIV_11 - * @arg @ref LL_RCC_RTC_HSE_DIV_12 - * @arg @ref LL_RCC_RTC_HSE_DIV_13 - * @arg @ref LL_RCC_RTC_HSE_DIV_14 - * @arg @ref LL_RCC_RTC_HSE_DIV_15 - * @arg @ref LL_RCC_RTC_HSE_DIV_16 - * @arg @ref LL_RCC_RTC_HSE_DIV_17 - * @arg @ref LL_RCC_RTC_HSE_DIV_18 - * @arg @ref LL_RCC_RTC_HSE_DIV_19 - * @arg @ref LL_RCC_RTC_HSE_DIV_20 - * @arg @ref LL_RCC_RTC_HSE_DIV_21 - * @arg @ref LL_RCC_RTC_HSE_DIV_22 - * @arg @ref LL_RCC_RTC_HSE_DIV_23 - * @arg @ref LL_RCC_RTC_HSE_DIV_24 - * @arg @ref LL_RCC_RTC_HSE_DIV_25 - * @arg @ref LL_RCC_RTC_HSE_DIV_26 - * @arg @ref LL_RCC_RTC_HSE_DIV_27 - * @arg @ref LL_RCC_RTC_HSE_DIV_28 - * @arg @ref LL_RCC_RTC_HSE_DIV_29 - * @arg @ref LL_RCC_RTC_HSE_DIV_30 - * @arg @ref LL_RCC_RTC_HSE_DIV_31 - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetRTC_HSEPrescaler(uint32_t Prescaler) -{ - MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, Prescaler); -} - -/** - * @brief Get HSE Prescalers for RTC Clock - * @rmtoll CFGR RTCPRE LL_RCC_GetRTC_HSEPrescaler - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_RTC_NOCLOCK - * @arg @ref LL_RCC_RTC_HSE_DIV_2 - * @arg @ref LL_RCC_RTC_HSE_DIV_3 - * @arg @ref LL_RCC_RTC_HSE_DIV_4 - * @arg @ref LL_RCC_RTC_HSE_DIV_5 - * @arg @ref LL_RCC_RTC_HSE_DIV_6 - * @arg @ref LL_RCC_RTC_HSE_DIV_7 - * @arg @ref LL_RCC_RTC_HSE_DIV_8 - * @arg @ref LL_RCC_RTC_HSE_DIV_9 - * @arg @ref LL_RCC_RTC_HSE_DIV_10 - * @arg @ref LL_RCC_RTC_HSE_DIV_11 - * @arg @ref LL_RCC_RTC_HSE_DIV_12 - * @arg @ref LL_RCC_RTC_HSE_DIV_13 - * @arg @ref LL_RCC_RTC_HSE_DIV_14 - * @arg @ref LL_RCC_RTC_HSE_DIV_15 - * @arg @ref LL_RCC_RTC_HSE_DIV_16 - * @arg @ref LL_RCC_RTC_HSE_DIV_17 - * @arg @ref LL_RCC_RTC_HSE_DIV_18 - * @arg @ref LL_RCC_RTC_HSE_DIV_19 - * @arg @ref LL_RCC_RTC_HSE_DIV_20 - * @arg @ref LL_RCC_RTC_HSE_DIV_21 - * @arg @ref LL_RCC_RTC_HSE_DIV_22 - * @arg @ref LL_RCC_RTC_HSE_DIV_23 - * @arg @ref LL_RCC_RTC_HSE_DIV_24 - * @arg @ref LL_RCC_RTC_HSE_DIV_25 - * @arg @ref LL_RCC_RTC_HSE_DIV_26 - * @arg @ref LL_RCC_RTC_HSE_DIV_27 - * @arg @ref LL_RCC_RTC_HSE_DIV_28 - * @arg @ref LL_RCC_RTC_HSE_DIV_29 - * @arg @ref LL_RCC_RTC_HSE_DIV_30 - * @arg @ref LL_RCC_RTC_HSE_DIV_31 - */ -__STATIC_INLINE uint32_t LL_RCC_GetRTC_HSEPrescaler(void) -{ - return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_RTCPRE)); -} - -/** - * @} - */ - -#if defined(RCC_DCKCFGR_TIMPRE) -/** @defgroup RCC_LL_EF_TIM_CLOCK_PRESCALER TIM - * @{ - */ - -/** - * @brief Set Timers Clock Prescalers - * @rmtoll DCKCFGR TIMPRE LL_RCC_SetTIMPrescaler - * @param Prescaler This parameter can be one of the following values: - * @arg @ref LL_RCC_TIM_PRESCALER_TWICE - * @arg @ref LL_RCC_TIM_PRESCALER_FOUR_TIMES - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetTIMPrescaler(uint32_t Prescaler) -{ - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_TIMPRE, Prescaler); -} - -/** - * @brief Get Timers Clock Prescalers - * @rmtoll DCKCFGR TIMPRE LL_RCC_GetTIMPrescaler - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_TIM_PRESCALER_TWICE - * @arg @ref LL_RCC_TIM_PRESCALER_FOUR_TIMES - */ -__STATIC_INLINE uint32_t LL_RCC_GetTIMPrescaler(void) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_TIMPRE)); -} - -/** - * @} - */ -#endif /* RCC_DCKCFGR_TIMPRE */ - -/** @defgroup RCC_LL_EF_PLL PLL - * @{ - */ - -/** - * @brief Enable PLL - * @rmtoll CR PLLON LL_RCC_PLL_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_Enable(void) -{ - SET_BIT(RCC->CR, RCC_CR_PLLON); -} - -/** - * @brief Disable PLL - * @note Cannot be disabled if the PLL clock is used as the system clock - * @rmtoll CR PLLON LL_RCC_PLL_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_Disable(void) -{ - CLEAR_BIT(RCC->CR, RCC_CR_PLLON); -} - -/** - * @brief Check if PLL Ready - * @rmtoll CR PLLRDY LL_RCC_PLL_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_IsReady(void) -{ - return (READ_BIT(RCC->CR, RCC_CR_PLLRDY) == (RCC_CR_PLLRDY)); -} - -/** - * @brief Configure PLL used for SYSCLK Domain - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI(*) are disabled - * @note PLLN/PLLP can be written only when PLL is disabled - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_SYS\n - * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_SYS\n - * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_SYS\n - * PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_SYS\n - * PLLCFGR PLLP LL_RCC_PLL_ConfigDomain_SYS - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param PLLN Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - * @param PLLP_R This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLP_DIV_2 - * @arg @ref LL_RCC_PLLP_DIV_4 - * @arg @ref LL_RCC_PLLP_DIV_6 - * @arg @ref LL_RCC_PLLP_DIV_8 - * @arg @ref LL_RCC_PLLR_DIV_2 (*) - * @arg @ref LL_RCC_PLLR_DIV_3 (*) - * @arg @ref LL_RCC_PLLR_DIV_4 (*) - * @arg @ref LL_RCC_PLLR_DIV_5 (*) - * @arg @ref LL_RCC_PLLR_DIV_6 (*) - * @arg @ref LL_RCC_PLLR_DIV_7 (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SYS(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP_R) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN, - Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos); - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLP, PLLP_R); -#if defined(RCC_PLLR_SYSCLK_SUPPORT) - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLR, PLLP_R); -#endif /* RCC_PLLR_SYSCLK_SUPPORT */ -} - -/** - * @brief Configure PLL used for 48Mhz domain clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI(*) are disabled - * @note PLLN/PLLQ can be written only when PLL is disabled - * @note This can be selected for USB, RNG, SDIO - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_48M\n - * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_48M\n - * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_48M\n - * PLLCFGR PLLQ LL_RCC_PLL_ConfigDomain_48M - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param PLLN Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - * @param PLLQ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLQ_DIV_2 - * @arg @ref LL_RCC_PLLQ_DIV_3 - * @arg @ref LL_RCC_PLLQ_DIV_4 - * @arg @ref LL_RCC_PLLQ_DIV_5 - * @arg @ref LL_RCC_PLLQ_DIV_6 - * @arg @ref LL_RCC_PLLQ_DIV_7 - * @arg @ref LL_RCC_PLLQ_DIV_8 - * @arg @ref LL_RCC_PLLQ_DIV_9 - * @arg @ref LL_RCC_PLLQ_DIV_10 - * @arg @ref LL_RCC_PLLQ_DIV_11 - * @arg @ref LL_RCC_PLLQ_DIV_12 - * @arg @ref LL_RCC_PLLQ_DIV_13 - * @arg @ref LL_RCC_PLLQ_DIV_14 - * @arg @ref LL_RCC_PLLQ_DIV_15 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLQ, - Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLQ); -} - -#if defined(DSI) -/** - * @brief Configure PLL used for DSI clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI are disabled - * @note PLLN/PLLR can be written only when PLL is disabled - * @note This can be selected for DSI - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_DSI\n - * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_DSI\n - * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_DSI\n - * PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_DSI - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param PLLN Between 50 and 432 - * @param PLLR This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_DSI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLR, - Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLR); -} -#endif /* DSI */ - -#if defined(RCC_PLLR_I2S_CLKSOURCE_SUPPORT) -/** - * @brief Configure PLL used for I2S clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI are disabled - * @note PLLN/PLLR can be written only when PLL is disabled - * @note This can be selected for I2S - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_I2S\n - * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_I2S\n - * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_I2S\n - * PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_I2S - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param PLLN Between 50 and 432 - * @param PLLR This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_I2S(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLR, - Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLR); -} -#endif /* RCC_PLLR_I2S_CLKSOURCE_SUPPORT */ - -#if defined(SPDIFRX) -/** - * @brief Configure PLL used for SPDIFRX clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI are disabled - * @note PLLN/PLLR can be written only when PLL is disabled - * @note This can be selected for SPDIFRX - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_SPDIFRX\n - * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_SPDIFRX\n - * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_SPDIFRX\n - * PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_SPDIFRX - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param PLLN Between 50 and 432 - * @param PLLR This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SPDIFRX(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLR, - Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLR); -} -#endif /* SPDIFRX */ - -#if defined(RCC_PLLCFGR_PLLR) -#if defined(SAI1) -/** - * @brief Configure PLL used for SAI clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI are disabled - * @note PLLN/PLLR can be written only when PLL is disabled - * @note This can be selected for SAI - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_SAI\n - * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_SAI\n - * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_SAI\n - * PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_SAI\n - * DCKCFGR PLLDIVR LL_RCC_PLL_ConfigDomain_SAI - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - * @param PLLN Between 50 and 432 - * @param PLLR This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - * @param PLLDIVR This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLDIVR_DIV_1 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_2 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_3 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_4 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_5 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_6 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_7 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_8 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_9 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_10 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_11 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_12 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_13 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_14 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_15 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_16 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_17 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_18 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_19 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_20 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_21 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_22 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_23 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_24 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_25 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_26 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_27 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_28 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_29 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_30 (*) - * @arg @ref LL_RCC_PLLDIVR_DIV_31 (*) - * - * (*) value not defined in all devices. - * @retval None - */ -#if defined(RCC_DCKCFGR_PLLDIVR) -__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR, uint32_t PLLDIVR) -#else -__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) -#endif /* RCC_DCKCFGR_PLLDIVR */ -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLR, - Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLR); -#if defined(RCC_DCKCFGR_PLLDIVR) - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLDIVR, PLLDIVR); -#endif /* RCC_DCKCFGR_PLLDIVR */ -} -#endif /* SAI1 */ -#endif /* RCC_PLLCFGR_PLLR */ - -/** - * @brief Configure PLL clock source - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_SetMainSource - * @param PLLSource This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_SetMainSource(uint32_t PLLSource) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, PLLSource); -} - -/** - * @brief Get the oscillator used as PLL clock source. - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_GetMainSource - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetMainSource(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC)); -} - -/** - * @brief Get Main PLL multiplication factor for VCO - * @rmtoll PLLCFGR PLLN LL_RCC_PLL_GetN - * @retval Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetN(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos); -} - -/** - * @brief Get Main PLL division factor for PLLP - * @rmtoll PLLCFGR PLLP LL_RCC_PLL_GetP - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLP_DIV_2 - * @arg @ref LL_RCC_PLLP_DIV_4 - * @arg @ref LL_RCC_PLLP_DIV_6 - * @arg @ref LL_RCC_PLLP_DIV_8 - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetP(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP)); -} - -/** - * @brief Get Main PLL division factor for PLLQ - * @note used for PLL48MCLK selected for USB, RNG, SDIO (48 MHz clock) - * @rmtoll PLLCFGR PLLQ LL_RCC_PLL_GetQ - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLQ_DIV_2 - * @arg @ref LL_RCC_PLLQ_DIV_3 - * @arg @ref LL_RCC_PLLQ_DIV_4 - * @arg @ref LL_RCC_PLLQ_DIV_5 - * @arg @ref LL_RCC_PLLQ_DIV_6 - * @arg @ref LL_RCC_PLLQ_DIV_7 - * @arg @ref LL_RCC_PLLQ_DIV_8 - * @arg @ref LL_RCC_PLLQ_DIV_9 - * @arg @ref LL_RCC_PLLQ_DIV_10 - * @arg @ref LL_RCC_PLLQ_DIV_11 - * @arg @ref LL_RCC_PLLQ_DIV_12 - * @arg @ref LL_RCC_PLLQ_DIV_13 - * @arg @ref LL_RCC_PLLQ_DIV_14 - * @arg @ref LL_RCC_PLLQ_DIV_15 - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetQ(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ)); -} - -#if defined(RCC_PLLCFGR_PLLR) -/** - * @brief Get Main PLL division factor for PLLR - * @note used for PLLCLK (system clock) - * @rmtoll PLLCFGR PLLR LL_RCC_PLL_GetR - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLR_DIV_2 - * @arg @ref LL_RCC_PLLR_DIV_3 - * @arg @ref LL_RCC_PLLR_DIV_4 - * @arg @ref LL_RCC_PLLR_DIV_5 - * @arg @ref LL_RCC_PLLR_DIV_6 - * @arg @ref LL_RCC_PLLR_DIV_7 - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetR(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLR)); -} -#endif /* RCC_PLLCFGR_PLLR */ - -#if defined(RCC_DCKCFGR_PLLDIVR) -/** - * @brief Get Main PLL division factor for PLLDIVR - * @note used for PLLSAICLK (SAI1 and SAI2 clock) - * @rmtoll DCKCFGR PLLDIVR LL_RCC_PLL_GetDIVR - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLDIVR_DIV_1 - * @arg @ref LL_RCC_PLLDIVR_DIV_2 - * @arg @ref LL_RCC_PLLDIVR_DIV_3 - * @arg @ref LL_RCC_PLLDIVR_DIV_4 - * @arg @ref LL_RCC_PLLDIVR_DIV_5 - * @arg @ref LL_RCC_PLLDIVR_DIV_6 - * @arg @ref LL_RCC_PLLDIVR_DIV_7 - * @arg @ref LL_RCC_PLLDIVR_DIV_8 - * @arg @ref LL_RCC_PLLDIVR_DIV_9 - * @arg @ref LL_RCC_PLLDIVR_DIV_10 - * @arg @ref LL_RCC_PLLDIVR_DIV_11 - * @arg @ref LL_RCC_PLLDIVR_DIV_12 - * @arg @ref LL_RCC_PLLDIVR_DIV_13 - * @arg @ref LL_RCC_PLLDIVR_DIV_14 - * @arg @ref LL_RCC_PLLDIVR_DIV_15 - * @arg @ref LL_RCC_PLLDIVR_DIV_16 - * @arg @ref LL_RCC_PLLDIVR_DIV_17 - * @arg @ref LL_RCC_PLLDIVR_DIV_18 - * @arg @ref LL_RCC_PLLDIVR_DIV_19 - * @arg @ref LL_RCC_PLLDIVR_DIV_20 - * @arg @ref LL_RCC_PLLDIVR_DIV_21 - * @arg @ref LL_RCC_PLLDIVR_DIV_22 - * @arg @ref LL_RCC_PLLDIVR_DIV_23 - * @arg @ref LL_RCC_PLLDIVR_DIV_24 - * @arg @ref LL_RCC_PLLDIVR_DIV_25 - * @arg @ref LL_RCC_PLLDIVR_DIV_26 - * @arg @ref LL_RCC_PLLDIVR_DIV_27 - * @arg @ref LL_RCC_PLLDIVR_DIV_28 - * @arg @ref LL_RCC_PLLDIVR_DIV_29 - * @arg @ref LL_RCC_PLLDIVR_DIV_30 - * @arg @ref LL_RCC_PLLDIVR_DIV_31 - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetDIVR(void) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_PLLDIVR)); -} -#endif /* RCC_DCKCFGR_PLLDIVR */ - -/** - * @brief Get Division factor for the main PLL and other PLL - * @rmtoll PLLCFGR PLLM LL_RCC_PLL_GetDivider - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @arg @ref LL_RCC_PLLM_DIV_9 - * @arg @ref LL_RCC_PLLM_DIV_10 - * @arg @ref LL_RCC_PLLM_DIV_11 - * @arg @ref LL_RCC_PLLM_DIV_12 - * @arg @ref LL_RCC_PLLM_DIV_13 - * @arg @ref LL_RCC_PLLM_DIV_14 - * @arg @ref LL_RCC_PLLM_DIV_15 - * @arg @ref LL_RCC_PLLM_DIV_16 - * @arg @ref LL_RCC_PLLM_DIV_17 - * @arg @ref LL_RCC_PLLM_DIV_18 - * @arg @ref LL_RCC_PLLM_DIV_19 - * @arg @ref LL_RCC_PLLM_DIV_20 - * @arg @ref LL_RCC_PLLM_DIV_21 - * @arg @ref LL_RCC_PLLM_DIV_22 - * @arg @ref LL_RCC_PLLM_DIV_23 - * @arg @ref LL_RCC_PLLM_DIV_24 - * @arg @ref LL_RCC_PLLM_DIV_25 - * @arg @ref LL_RCC_PLLM_DIV_26 - * @arg @ref LL_RCC_PLLM_DIV_27 - * @arg @ref LL_RCC_PLLM_DIV_28 - * @arg @ref LL_RCC_PLLM_DIV_29 - * @arg @ref LL_RCC_PLLM_DIV_30 - * @arg @ref LL_RCC_PLLM_DIV_31 - * @arg @ref LL_RCC_PLLM_DIV_32 - * @arg @ref LL_RCC_PLLM_DIV_33 - * @arg @ref LL_RCC_PLLM_DIV_34 - * @arg @ref LL_RCC_PLLM_DIV_35 - * @arg @ref LL_RCC_PLLM_DIV_36 - * @arg @ref LL_RCC_PLLM_DIV_37 - * @arg @ref LL_RCC_PLLM_DIV_38 - * @arg @ref LL_RCC_PLLM_DIV_39 - * @arg @ref LL_RCC_PLLM_DIV_40 - * @arg @ref LL_RCC_PLLM_DIV_41 - * @arg @ref LL_RCC_PLLM_DIV_42 - * @arg @ref LL_RCC_PLLM_DIV_43 - * @arg @ref LL_RCC_PLLM_DIV_44 - * @arg @ref LL_RCC_PLLM_DIV_45 - * @arg @ref LL_RCC_PLLM_DIV_46 - * @arg @ref LL_RCC_PLLM_DIV_47 - * @arg @ref LL_RCC_PLLM_DIV_48 - * @arg @ref LL_RCC_PLLM_DIV_49 - * @arg @ref LL_RCC_PLLM_DIV_50 - * @arg @ref LL_RCC_PLLM_DIV_51 - * @arg @ref LL_RCC_PLLM_DIV_52 - * @arg @ref LL_RCC_PLLM_DIV_53 - * @arg @ref LL_RCC_PLLM_DIV_54 - * @arg @ref LL_RCC_PLLM_DIV_55 - * @arg @ref LL_RCC_PLLM_DIV_56 - * @arg @ref LL_RCC_PLLM_DIV_57 - * @arg @ref LL_RCC_PLLM_DIV_58 - * @arg @ref LL_RCC_PLLM_DIV_59 - * @arg @ref LL_RCC_PLLM_DIV_60 - * @arg @ref LL_RCC_PLLM_DIV_61 - * @arg @ref LL_RCC_PLLM_DIV_62 - * @arg @ref LL_RCC_PLLM_DIV_63 - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetDivider(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM)); -} - -/** - * @brief Configure Spread Spectrum used for PLL - * @note These bits must be written before enabling PLL - * @rmtoll SSCGR MODPER LL_RCC_PLL_ConfigSpreadSpectrum\n - * SSCGR INCSTEP LL_RCC_PLL_ConfigSpreadSpectrum\n - * SSCGR SPREADSEL LL_RCC_PLL_ConfigSpreadSpectrum - * @param Mod Between Min_Data=0 and Max_Data=8191 - * @param Inc Between Min_Data=0 and Max_Data=32767 - * @param Sel This parameter can be one of the following values: - * @arg @ref LL_RCC_SPREAD_SELECT_CENTER - * @arg @ref LL_RCC_SPREAD_SELECT_DOWN - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_ConfigSpreadSpectrum(uint32_t Mod, uint32_t Inc, uint32_t Sel) -{ - MODIFY_REG(RCC->SSCGR, RCC_SSCGR_MODPER | RCC_SSCGR_INCSTEP | RCC_SSCGR_SPREADSEL, Mod | (Inc << RCC_SSCGR_INCSTEP_Pos) | Sel); -} - -/** - * @brief Get Spread Spectrum Modulation Period for PLL - * @rmtoll SSCGR MODPER LL_RCC_PLL_GetPeriodModulation - * @retval Between Min_Data=0 and Max_Data=8191 - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetPeriodModulation(void) -{ - return (uint32_t)(READ_BIT(RCC->SSCGR, RCC_SSCGR_MODPER)); -} - -/** - * @brief Get Spread Spectrum Incrementation Step for PLL - * @note Must be written before enabling PLL - * @rmtoll SSCGR INCSTEP LL_RCC_PLL_GetStepIncrementation - * @retval Between Min_Data=0 and Max_Data=32767 - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetStepIncrementation(void) -{ - return (uint32_t)(READ_BIT(RCC->SSCGR, RCC_SSCGR_INCSTEP) >> RCC_SSCGR_INCSTEP_Pos); -} - -/** - * @brief Get Spread Spectrum Selection for PLL - * @note Must be written before enabling PLL - * @rmtoll SSCGR SPREADSEL LL_RCC_PLL_GetSpreadSelection - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_SPREAD_SELECT_CENTER - * @arg @ref LL_RCC_SPREAD_SELECT_DOWN - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetSpreadSelection(void) -{ - return (uint32_t)(READ_BIT(RCC->SSCGR, RCC_SSCGR_SPREADSEL)); -} - -/** - * @brief Enable Spread Spectrum for PLL. - * @rmtoll SSCGR SSCGEN LL_RCC_PLL_SpreadSpectrum_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_SpreadSpectrum_Enable(void) -{ - SET_BIT(RCC->SSCGR, RCC_SSCGR_SSCGEN); -} - -/** - * @brief Disable Spread Spectrum for PLL. - * @rmtoll SSCGR SSCGEN LL_RCC_PLL_SpreadSpectrum_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_SpreadSpectrum_Disable(void) -{ - CLEAR_BIT(RCC->SSCGR, RCC_SSCGR_SSCGEN); -} - -/** - * @} - */ - -#if defined(RCC_PLLI2S_SUPPORT) -/** @defgroup RCC_LL_EF_PLLI2S PLLI2S - * @{ - */ - -/** - * @brief Enable PLLI2S - * @rmtoll CR PLLI2SON LL_RCC_PLLI2S_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLI2S_Enable(void) -{ - SET_BIT(RCC->CR, RCC_CR_PLLI2SON); -} - -/** - * @brief Disable PLLI2S - * @rmtoll CR PLLI2SON LL_RCC_PLLI2S_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLI2S_Disable(void) -{ - CLEAR_BIT(RCC->CR, RCC_CR_PLLI2SON); -} - -/** - * @brief Check if PLLI2S Ready - * @rmtoll CR PLLI2SRDY LL_RCC_PLLI2S_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_PLLI2S_IsReady(void) -{ - return (READ_BIT(RCC->CR, RCC_CR_PLLI2SRDY) == (RCC_CR_PLLI2SRDY)); -} - -#if (defined(RCC_DCKCFGR_PLLI2SDIVQ) || defined(RCC_DCKCFGR_PLLI2SDIVR)) -/** - * @brief Configure PLLI2S used for SAI domain clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI(*) are disabled - * @note PLLN/PLLQ/PLLR can be written only when PLLI2S is disabled - * @note This can be selected for SAI - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLI2S_ConfigDomain_SAI\n - * PLLI2SCFGR PLLI2SSRC LL_RCC_PLLI2S_ConfigDomain_SAI\n - * PLLCFGR PLLM LL_RCC_PLLI2S_ConfigDomain_SAI\n - * PLLI2SCFGR PLLI2SM LL_RCC_PLLI2S_ConfigDomain_SAI\n - * PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_ConfigDomain_SAI\n - * PLLI2SCFGR PLLI2SQ LL_RCC_PLLI2S_ConfigDomain_SAI\n - * PLLI2SCFGR PLLI2SR LL_RCC_PLLI2S_ConfigDomain_SAI\n - * DCKCFGR PLLI2SDIVQ LL_RCC_PLLI2S_ConfigDomain_SAI\n - * DCKCFGR PLLI2SDIVR LL_RCC_PLLI2S_ConfigDomain_SAI - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @arg @ref LL_RCC_PLLI2SSOURCE_PIN (*) - * - * (*) value not defined in all devices. - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SM_DIV_2 - * @arg @ref LL_RCC_PLLI2SM_DIV_3 - * @arg @ref LL_RCC_PLLI2SM_DIV_4 - * @arg @ref LL_RCC_PLLI2SM_DIV_5 - * @arg @ref LL_RCC_PLLI2SM_DIV_6 - * @arg @ref LL_RCC_PLLI2SM_DIV_7 - * @arg @ref LL_RCC_PLLI2SM_DIV_8 - * @arg @ref LL_RCC_PLLI2SM_DIV_9 - * @arg @ref LL_RCC_PLLI2SM_DIV_10 - * @arg @ref LL_RCC_PLLI2SM_DIV_11 - * @arg @ref LL_RCC_PLLI2SM_DIV_12 - * @arg @ref LL_RCC_PLLI2SM_DIV_13 - * @arg @ref LL_RCC_PLLI2SM_DIV_14 - * @arg @ref LL_RCC_PLLI2SM_DIV_15 - * @arg @ref LL_RCC_PLLI2SM_DIV_16 - * @arg @ref LL_RCC_PLLI2SM_DIV_17 - * @arg @ref LL_RCC_PLLI2SM_DIV_18 - * @arg @ref LL_RCC_PLLI2SM_DIV_19 - * @arg @ref LL_RCC_PLLI2SM_DIV_20 - * @arg @ref LL_RCC_PLLI2SM_DIV_21 - * @arg @ref LL_RCC_PLLI2SM_DIV_22 - * @arg @ref LL_RCC_PLLI2SM_DIV_23 - * @arg @ref LL_RCC_PLLI2SM_DIV_24 - * @arg @ref LL_RCC_PLLI2SM_DIV_25 - * @arg @ref LL_RCC_PLLI2SM_DIV_26 - * @arg @ref LL_RCC_PLLI2SM_DIV_27 - * @arg @ref LL_RCC_PLLI2SM_DIV_28 - * @arg @ref LL_RCC_PLLI2SM_DIV_29 - * @arg @ref LL_RCC_PLLI2SM_DIV_30 - * @arg @ref LL_RCC_PLLI2SM_DIV_31 - * @arg @ref LL_RCC_PLLI2SM_DIV_32 - * @arg @ref LL_RCC_PLLI2SM_DIV_33 - * @arg @ref LL_RCC_PLLI2SM_DIV_34 - * @arg @ref LL_RCC_PLLI2SM_DIV_35 - * @arg @ref LL_RCC_PLLI2SM_DIV_36 - * @arg @ref LL_RCC_PLLI2SM_DIV_37 - * @arg @ref LL_RCC_PLLI2SM_DIV_38 - * @arg @ref LL_RCC_PLLI2SM_DIV_39 - * @arg @ref LL_RCC_PLLI2SM_DIV_40 - * @arg @ref LL_RCC_PLLI2SM_DIV_41 - * @arg @ref LL_RCC_PLLI2SM_DIV_42 - * @arg @ref LL_RCC_PLLI2SM_DIV_43 - * @arg @ref LL_RCC_PLLI2SM_DIV_44 - * @arg @ref LL_RCC_PLLI2SM_DIV_45 - * @arg @ref LL_RCC_PLLI2SM_DIV_46 - * @arg @ref LL_RCC_PLLI2SM_DIV_47 - * @arg @ref LL_RCC_PLLI2SM_DIV_48 - * @arg @ref LL_RCC_PLLI2SM_DIV_49 - * @arg @ref LL_RCC_PLLI2SM_DIV_50 - * @arg @ref LL_RCC_PLLI2SM_DIV_51 - * @arg @ref LL_RCC_PLLI2SM_DIV_52 - * @arg @ref LL_RCC_PLLI2SM_DIV_53 - * @arg @ref LL_RCC_PLLI2SM_DIV_54 - * @arg @ref LL_RCC_PLLI2SM_DIV_55 - * @arg @ref LL_RCC_PLLI2SM_DIV_56 - * @arg @ref LL_RCC_PLLI2SM_DIV_57 - * @arg @ref LL_RCC_PLLI2SM_DIV_58 - * @arg @ref LL_RCC_PLLI2SM_DIV_59 - * @arg @ref LL_RCC_PLLI2SM_DIV_60 - * @arg @ref LL_RCC_PLLI2SM_DIV_61 - * @arg @ref LL_RCC_PLLI2SM_DIV_62 - * @arg @ref LL_RCC_PLLI2SM_DIV_63 - * @param PLLN Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - * @param PLLQ_R This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SQ_DIV_2 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_3 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_4 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_5 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_6 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_7 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_8 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_9 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_10 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_11 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_12 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_13 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_14 (*) - * @arg @ref LL_RCC_PLLI2SQ_DIV_15 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_2 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_3 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_4 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_5 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_6 (*) - * @arg @ref LL_RCC_PLLI2SR_DIV_7 (*) - * - * (*) value not defined in all devices. - * @param PLLDIVQ_R This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_1 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_2 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_3 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_4 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_5 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_6 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_7 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_8 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_9 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_10 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_11 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_12 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_13 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_14 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_15 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_16 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_17 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_18 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_19 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_20 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_21 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_22 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_23 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_24 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_25 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_26 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_27 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_28 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_29 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_30 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_31 (*) - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_32 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_1 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_2 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_3 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_4 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_5 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_6 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_7 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_8 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_9 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_10 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_11 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_12 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_13 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_14 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_15 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_16 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_17 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_18 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_19 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_20 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_21 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_22 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_23 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_24 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_25 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_26 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_27 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_28 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_29 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_30 (*) - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_31 (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLI2S_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ_R, uint32_t PLLDIVQ_R) -{ - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&RCC->PLLCFGR) + (Source & 0x80U))); - MODIFY_REG(*pReg, RCC_PLLCFGR_PLLSRC, (Source & (~0x80U))); -#if defined(RCC_PLLI2SCFGR_PLLI2SM) - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SM, PLLM); -#else - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, PLLM); -#endif /* RCC_PLLI2SCFGR_PLLI2SM */ - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN, PLLN << RCC_PLLI2SCFGR_PLLI2SN_Pos); -#if defined(RCC_DCKCFGR_PLLI2SDIVQ) - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SQ, PLLQ_R); - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVQ, PLLDIVQ_R); -#else - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SR, PLLQ_R); - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVR, PLLDIVQ_R); -#endif /* RCC_DCKCFGR_PLLI2SDIVQ */ -} -#endif /* RCC_DCKCFGR_PLLI2SDIVQ && RCC_DCKCFGR_PLLI2SDIVR */ - -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) && !defined(RCC_DCKCFGR_PLLI2SDIVQ) -/** - * @brief Configure PLLI2S used for 48Mhz domain clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI(*) are disabled - * @note PLLN/PLLQ can be written only when PLLI2S is disabled - * @note This can be selected for RNG, USB, SDIO - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLI2S_ConfigDomain_48M\n - * PLLI2SCFGR PLLI2SSRC LL_RCC_PLLI2S_ConfigDomain_48M\n - * PLLCFGR PLLM LL_RCC_PLLI2S_ConfigDomain_48M\n - * PLLI2SCFGR PLLI2SM LL_RCC_PLLI2S_ConfigDomain_48M\n - * PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_ConfigDomain_48M\n - * PLLI2SCFGR PLLI2SQ LL_RCC_PLLI2S_ConfigDomain_48M - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @arg @ref LL_RCC_PLLI2SSOURCE_PIN (*) - * - * (*) value not defined in all devices. - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SM_DIV_2 - * @arg @ref LL_RCC_PLLI2SM_DIV_3 - * @arg @ref LL_RCC_PLLI2SM_DIV_4 - * @arg @ref LL_RCC_PLLI2SM_DIV_5 - * @arg @ref LL_RCC_PLLI2SM_DIV_6 - * @arg @ref LL_RCC_PLLI2SM_DIV_7 - * @arg @ref LL_RCC_PLLI2SM_DIV_8 - * @arg @ref LL_RCC_PLLI2SM_DIV_9 - * @arg @ref LL_RCC_PLLI2SM_DIV_10 - * @arg @ref LL_RCC_PLLI2SM_DIV_11 - * @arg @ref LL_RCC_PLLI2SM_DIV_12 - * @arg @ref LL_RCC_PLLI2SM_DIV_13 - * @arg @ref LL_RCC_PLLI2SM_DIV_14 - * @arg @ref LL_RCC_PLLI2SM_DIV_15 - * @arg @ref LL_RCC_PLLI2SM_DIV_16 - * @arg @ref LL_RCC_PLLI2SM_DIV_17 - * @arg @ref LL_RCC_PLLI2SM_DIV_18 - * @arg @ref LL_RCC_PLLI2SM_DIV_19 - * @arg @ref LL_RCC_PLLI2SM_DIV_20 - * @arg @ref LL_RCC_PLLI2SM_DIV_21 - * @arg @ref LL_RCC_PLLI2SM_DIV_22 - * @arg @ref LL_RCC_PLLI2SM_DIV_23 - * @arg @ref LL_RCC_PLLI2SM_DIV_24 - * @arg @ref LL_RCC_PLLI2SM_DIV_25 - * @arg @ref LL_RCC_PLLI2SM_DIV_26 - * @arg @ref LL_RCC_PLLI2SM_DIV_27 - * @arg @ref LL_RCC_PLLI2SM_DIV_28 - * @arg @ref LL_RCC_PLLI2SM_DIV_29 - * @arg @ref LL_RCC_PLLI2SM_DIV_30 - * @arg @ref LL_RCC_PLLI2SM_DIV_31 - * @arg @ref LL_RCC_PLLI2SM_DIV_32 - * @arg @ref LL_RCC_PLLI2SM_DIV_33 - * @arg @ref LL_RCC_PLLI2SM_DIV_34 - * @arg @ref LL_RCC_PLLI2SM_DIV_35 - * @arg @ref LL_RCC_PLLI2SM_DIV_36 - * @arg @ref LL_RCC_PLLI2SM_DIV_37 - * @arg @ref LL_RCC_PLLI2SM_DIV_38 - * @arg @ref LL_RCC_PLLI2SM_DIV_39 - * @arg @ref LL_RCC_PLLI2SM_DIV_40 - * @arg @ref LL_RCC_PLLI2SM_DIV_41 - * @arg @ref LL_RCC_PLLI2SM_DIV_42 - * @arg @ref LL_RCC_PLLI2SM_DIV_43 - * @arg @ref LL_RCC_PLLI2SM_DIV_44 - * @arg @ref LL_RCC_PLLI2SM_DIV_45 - * @arg @ref LL_RCC_PLLI2SM_DIV_46 - * @arg @ref LL_RCC_PLLI2SM_DIV_47 - * @arg @ref LL_RCC_PLLI2SM_DIV_48 - * @arg @ref LL_RCC_PLLI2SM_DIV_49 - * @arg @ref LL_RCC_PLLI2SM_DIV_50 - * @arg @ref LL_RCC_PLLI2SM_DIV_51 - * @arg @ref LL_RCC_PLLI2SM_DIV_52 - * @arg @ref LL_RCC_PLLI2SM_DIV_53 - * @arg @ref LL_RCC_PLLI2SM_DIV_54 - * @arg @ref LL_RCC_PLLI2SM_DIV_55 - * @arg @ref LL_RCC_PLLI2SM_DIV_56 - * @arg @ref LL_RCC_PLLI2SM_DIV_57 - * @arg @ref LL_RCC_PLLI2SM_DIV_58 - * @arg @ref LL_RCC_PLLI2SM_DIV_59 - * @arg @ref LL_RCC_PLLI2SM_DIV_60 - * @arg @ref LL_RCC_PLLI2SM_DIV_61 - * @arg @ref LL_RCC_PLLI2SM_DIV_62 - * @arg @ref LL_RCC_PLLI2SM_DIV_63 - * @param PLLN Between 50 and 432 - * @param PLLQ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SQ_DIV_2 - * @arg @ref LL_RCC_PLLI2SQ_DIV_3 - * @arg @ref LL_RCC_PLLI2SQ_DIV_4 - * @arg @ref LL_RCC_PLLI2SQ_DIV_5 - * @arg @ref LL_RCC_PLLI2SQ_DIV_6 - * @arg @ref LL_RCC_PLLI2SQ_DIV_7 - * @arg @ref LL_RCC_PLLI2SQ_DIV_8 - * @arg @ref LL_RCC_PLLI2SQ_DIV_9 - * @arg @ref LL_RCC_PLLI2SQ_DIV_10 - * @arg @ref LL_RCC_PLLI2SQ_DIV_11 - * @arg @ref LL_RCC_PLLI2SQ_DIV_12 - * @arg @ref LL_RCC_PLLI2SQ_DIV_13 - * @arg @ref LL_RCC_PLLI2SQ_DIV_14 - * @arg @ref LL_RCC_PLLI2SQ_DIV_15 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLI2S_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) -{ - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&RCC->PLLCFGR) + (Source & 0x80U))); - MODIFY_REG(*pReg, RCC_PLLCFGR_PLLSRC, (Source & (~0x80U))); -#if defined(RCC_PLLI2SCFGR_PLLI2SM) - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SM, PLLM); -#else - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, PLLM); -#endif /* RCC_PLLI2SCFGR_PLLI2SM */ - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN | RCC_PLLI2SCFGR_PLLI2SQ, PLLN << RCC_PLLI2SCFGR_PLLI2SN_Pos | PLLQ); -} -#endif /* RCC_PLLI2SCFGR_PLLI2SQ && !RCC_DCKCFGR_PLLI2SDIVQ */ - -#if defined(SPDIFRX) -/** - * @brief Configure PLLI2S used for SPDIFRX domain clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI(*) are disabled - * @note PLLN/PLLP can be written only when PLLI2S is disabled - * @note This can be selected for SPDIFRX - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLI2S_ConfigDomain_SPDIFRX\n - * PLLCFGR PLLM LL_RCC_PLLI2S_ConfigDomain_SPDIFRX\n - * PLLI2SCFGR PLLI2SM LL_RCC_PLLI2S_ConfigDomain_SPDIFRX\n - * PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_ConfigDomain_SPDIFRX\n - * PLLI2SCFGR PLLI2SP LL_RCC_PLLI2S_ConfigDomain_SPDIFRX - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SM_DIV_2 - * @arg @ref LL_RCC_PLLI2SM_DIV_3 - * @arg @ref LL_RCC_PLLI2SM_DIV_4 - * @arg @ref LL_RCC_PLLI2SM_DIV_5 - * @arg @ref LL_RCC_PLLI2SM_DIV_6 - * @arg @ref LL_RCC_PLLI2SM_DIV_7 - * @arg @ref LL_RCC_PLLI2SM_DIV_8 - * @arg @ref LL_RCC_PLLI2SM_DIV_9 - * @arg @ref LL_RCC_PLLI2SM_DIV_10 - * @arg @ref LL_RCC_PLLI2SM_DIV_11 - * @arg @ref LL_RCC_PLLI2SM_DIV_12 - * @arg @ref LL_RCC_PLLI2SM_DIV_13 - * @arg @ref LL_RCC_PLLI2SM_DIV_14 - * @arg @ref LL_RCC_PLLI2SM_DIV_15 - * @arg @ref LL_RCC_PLLI2SM_DIV_16 - * @arg @ref LL_RCC_PLLI2SM_DIV_17 - * @arg @ref LL_RCC_PLLI2SM_DIV_18 - * @arg @ref LL_RCC_PLLI2SM_DIV_19 - * @arg @ref LL_RCC_PLLI2SM_DIV_20 - * @arg @ref LL_RCC_PLLI2SM_DIV_21 - * @arg @ref LL_RCC_PLLI2SM_DIV_22 - * @arg @ref LL_RCC_PLLI2SM_DIV_23 - * @arg @ref LL_RCC_PLLI2SM_DIV_24 - * @arg @ref LL_RCC_PLLI2SM_DIV_25 - * @arg @ref LL_RCC_PLLI2SM_DIV_26 - * @arg @ref LL_RCC_PLLI2SM_DIV_27 - * @arg @ref LL_RCC_PLLI2SM_DIV_28 - * @arg @ref LL_RCC_PLLI2SM_DIV_29 - * @arg @ref LL_RCC_PLLI2SM_DIV_30 - * @arg @ref LL_RCC_PLLI2SM_DIV_31 - * @arg @ref LL_RCC_PLLI2SM_DIV_32 - * @arg @ref LL_RCC_PLLI2SM_DIV_33 - * @arg @ref LL_RCC_PLLI2SM_DIV_34 - * @arg @ref LL_RCC_PLLI2SM_DIV_35 - * @arg @ref LL_RCC_PLLI2SM_DIV_36 - * @arg @ref LL_RCC_PLLI2SM_DIV_37 - * @arg @ref LL_RCC_PLLI2SM_DIV_38 - * @arg @ref LL_RCC_PLLI2SM_DIV_39 - * @arg @ref LL_RCC_PLLI2SM_DIV_40 - * @arg @ref LL_RCC_PLLI2SM_DIV_41 - * @arg @ref LL_RCC_PLLI2SM_DIV_42 - * @arg @ref LL_RCC_PLLI2SM_DIV_43 - * @arg @ref LL_RCC_PLLI2SM_DIV_44 - * @arg @ref LL_RCC_PLLI2SM_DIV_45 - * @arg @ref LL_RCC_PLLI2SM_DIV_46 - * @arg @ref LL_RCC_PLLI2SM_DIV_47 - * @arg @ref LL_RCC_PLLI2SM_DIV_48 - * @arg @ref LL_RCC_PLLI2SM_DIV_49 - * @arg @ref LL_RCC_PLLI2SM_DIV_50 - * @arg @ref LL_RCC_PLLI2SM_DIV_51 - * @arg @ref LL_RCC_PLLI2SM_DIV_52 - * @arg @ref LL_RCC_PLLI2SM_DIV_53 - * @arg @ref LL_RCC_PLLI2SM_DIV_54 - * @arg @ref LL_RCC_PLLI2SM_DIV_55 - * @arg @ref LL_RCC_PLLI2SM_DIV_56 - * @arg @ref LL_RCC_PLLI2SM_DIV_57 - * @arg @ref LL_RCC_PLLI2SM_DIV_58 - * @arg @ref LL_RCC_PLLI2SM_DIV_59 - * @arg @ref LL_RCC_PLLI2SM_DIV_60 - * @arg @ref LL_RCC_PLLI2SM_DIV_61 - * @arg @ref LL_RCC_PLLI2SM_DIV_62 - * @arg @ref LL_RCC_PLLI2SM_DIV_63 - * @param PLLN Between 50 and 432 - * @param PLLP This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SP_DIV_2 - * @arg @ref LL_RCC_PLLI2SP_DIV_4 - * @arg @ref LL_RCC_PLLI2SP_DIV_6 - * @arg @ref LL_RCC_PLLI2SP_DIV_8 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLI2S_ConfigDomain_SPDIFRX(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source); -#if defined(RCC_PLLI2SCFGR_PLLI2SM) - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SM, PLLM); -#else - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, PLLM); -#endif /* RCC_PLLI2SCFGR_PLLI2SM */ - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN | RCC_PLLI2SCFGR_PLLI2SP, PLLN << RCC_PLLI2SCFGR_PLLI2SN_Pos | PLLP); -} -#endif /* SPDIFRX */ - -/** - * @brief Configure PLLI2S used for I2S1 domain clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI(*) are disabled - * @note PLLN/PLLR can be written only when PLLI2S is disabled - * @note This can be selected for I2S - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLI2S_ConfigDomain_I2S\n - * PLLCFGR PLLM LL_RCC_PLLI2S_ConfigDomain_I2S\n - * PLLI2SCFGR PLLI2SSRC LL_RCC_PLLI2S_ConfigDomain_I2S\n - * PLLI2SCFGR PLLI2SM LL_RCC_PLLI2S_ConfigDomain_I2S\n - * PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_ConfigDomain_I2S\n - * PLLI2SCFGR PLLI2SR LL_RCC_PLLI2S_ConfigDomain_I2S - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @arg @ref LL_RCC_PLLI2SSOURCE_PIN (*) - * - * (*) value not defined in all devices. - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SM_DIV_2 - * @arg @ref LL_RCC_PLLI2SM_DIV_3 - * @arg @ref LL_RCC_PLLI2SM_DIV_4 - * @arg @ref LL_RCC_PLLI2SM_DIV_5 - * @arg @ref LL_RCC_PLLI2SM_DIV_6 - * @arg @ref LL_RCC_PLLI2SM_DIV_7 - * @arg @ref LL_RCC_PLLI2SM_DIV_8 - * @arg @ref LL_RCC_PLLI2SM_DIV_9 - * @arg @ref LL_RCC_PLLI2SM_DIV_10 - * @arg @ref LL_RCC_PLLI2SM_DIV_11 - * @arg @ref LL_RCC_PLLI2SM_DIV_12 - * @arg @ref LL_RCC_PLLI2SM_DIV_13 - * @arg @ref LL_RCC_PLLI2SM_DIV_14 - * @arg @ref LL_RCC_PLLI2SM_DIV_15 - * @arg @ref LL_RCC_PLLI2SM_DIV_16 - * @arg @ref LL_RCC_PLLI2SM_DIV_17 - * @arg @ref LL_RCC_PLLI2SM_DIV_18 - * @arg @ref LL_RCC_PLLI2SM_DIV_19 - * @arg @ref LL_RCC_PLLI2SM_DIV_20 - * @arg @ref LL_RCC_PLLI2SM_DIV_21 - * @arg @ref LL_RCC_PLLI2SM_DIV_22 - * @arg @ref LL_RCC_PLLI2SM_DIV_23 - * @arg @ref LL_RCC_PLLI2SM_DIV_24 - * @arg @ref LL_RCC_PLLI2SM_DIV_25 - * @arg @ref LL_RCC_PLLI2SM_DIV_26 - * @arg @ref LL_RCC_PLLI2SM_DIV_27 - * @arg @ref LL_RCC_PLLI2SM_DIV_28 - * @arg @ref LL_RCC_PLLI2SM_DIV_29 - * @arg @ref LL_RCC_PLLI2SM_DIV_30 - * @arg @ref LL_RCC_PLLI2SM_DIV_31 - * @arg @ref LL_RCC_PLLI2SM_DIV_32 - * @arg @ref LL_RCC_PLLI2SM_DIV_33 - * @arg @ref LL_RCC_PLLI2SM_DIV_34 - * @arg @ref LL_RCC_PLLI2SM_DIV_35 - * @arg @ref LL_RCC_PLLI2SM_DIV_36 - * @arg @ref LL_RCC_PLLI2SM_DIV_37 - * @arg @ref LL_RCC_PLLI2SM_DIV_38 - * @arg @ref LL_RCC_PLLI2SM_DIV_39 - * @arg @ref LL_RCC_PLLI2SM_DIV_40 - * @arg @ref LL_RCC_PLLI2SM_DIV_41 - * @arg @ref LL_RCC_PLLI2SM_DIV_42 - * @arg @ref LL_RCC_PLLI2SM_DIV_43 - * @arg @ref LL_RCC_PLLI2SM_DIV_44 - * @arg @ref LL_RCC_PLLI2SM_DIV_45 - * @arg @ref LL_RCC_PLLI2SM_DIV_46 - * @arg @ref LL_RCC_PLLI2SM_DIV_47 - * @arg @ref LL_RCC_PLLI2SM_DIV_48 - * @arg @ref LL_RCC_PLLI2SM_DIV_49 - * @arg @ref LL_RCC_PLLI2SM_DIV_50 - * @arg @ref LL_RCC_PLLI2SM_DIV_51 - * @arg @ref LL_RCC_PLLI2SM_DIV_52 - * @arg @ref LL_RCC_PLLI2SM_DIV_53 - * @arg @ref LL_RCC_PLLI2SM_DIV_54 - * @arg @ref LL_RCC_PLLI2SM_DIV_55 - * @arg @ref LL_RCC_PLLI2SM_DIV_56 - * @arg @ref LL_RCC_PLLI2SM_DIV_57 - * @arg @ref LL_RCC_PLLI2SM_DIV_58 - * @arg @ref LL_RCC_PLLI2SM_DIV_59 - * @arg @ref LL_RCC_PLLI2SM_DIV_60 - * @arg @ref LL_RCC_PLLI2SM_DIV_61 - * @arg @ref LL_RCC_PLLI2SM_DIV_62 - * @arg @ref LL_RCC_PLLI2SM_DIV_63 - * @param PLLN Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - * @param PLLR This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLI2SR_DIV_2 - * @arg @ref LL_RCC_PLLI2SR_DIV_3 - * @arg @ref LL_RCC_PLLI2SR_DIV_4 - * @arg @ref LL_RCC_PLLI2SR_DIV_5 - * @arg @ref LL_RCC_PLLI2SR_DIV_6 - * @arg @ref LL_RCC_PLLI2SR_DIV_7 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLI2S_ConfigDomain_I2S(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) -{ - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&RCC->PLLCFGR) + (Source & 0x80U))); - MODIFY_REG(*pReg, RCC_PLLCFGR_PLLSRC, (Source & (~0x80U))); -#if defined(RCC_PLLI2SCFGR_PLLI2SM) - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SM, PLLM); -#else - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, PLLM); -#endif /* RCC_PLLI2SCFGR_PLLI2SM */ - MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN | RCC_PLLI2SCFGR_PLLI2SR, PLLN << RCC_PLLI2SCFGR_PLLI2SN_Pos | PLLR); -} - -/** - * @brief Get I2SPLL multiplication factor for VCO - * @rmtoll PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_GetN - * @retval Between 50/192(*) and 432 - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetN(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos); -} - -#if defined(RCC_PLLI2SCFGR_PLLI2SQ) -/** - * @brief Get I2SPLL division factor for PLLI2SQ - * @rmtoll PLLI2SCFGR PLLI2SQ LL_RCC_PLLI2S_GetQ - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLI2SQ_DIV_2 - * @arg @ref LL_RCC_PLLI2SQ_DIV_3 - * @arg @ref LL_RCC_PLLI2SQ_DIV_4 - * @arg @ref LL_RCC_PLLI2SQ_DIV_5 - * @arg @ref LL_RCC_PLLI2SQ_DIV_6 - * @arg @ref LL_RCC_PLLI2SQ_DIV_7 - * @arg @ref LL_RCC_PLLI2SQ_DIV_8 - * @arg @ref LL_RCC_PLLI2SQ_DIV_9 - * @arg @ref LL_RCC_PLLI2SQ_DIV_10 - * @arg @ref LL_RCC_PLLI2SQ_DIV_11 - * @arg @ref LL_RCC_PLLI2SQ_DIV_12 - * @arg @ref LL_RCC_PLLI2SQ_DIV_13 - * @arg @ref LL_RCC_PLLI2SQ_DIV_14 - * @arg @ref LL_RCC_PLLI2SQ_DIV_15 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetQ(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SQ)); -} -#endif /* RCC_PLLI2SCFGR_PLLI2SQ */ - -/** - * @brief Get I2SPLL division factor for PLLI2SR - * @note used for PLLI2SCLK (I2S clock) - * @rmtoll PLLI2SCFGR PLLI2SR LL_RCC_PLLI2S_GetR - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLI2SR_DIV_2 - * @arg @ref LL_RCC_PLLI2SR_DIV_3 - * @arg @ref LL_RCC_PLLI2SR_DIV_4 - * @arg @ref LL_RCC_PLLI2SR_DIV_5 - * @arg @ref LL_RCC_PLLI2SR_DIV_6 - * @arg @ref LL_RCC_PLLI2SR_DIV_7 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetR(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SR)); -} - -#if defined(RCC_PLLI2SCFGR_PLLI2SP) -/** - * @brief Get I2SPLL division factor for PLLI2SP - * @note used for PLLSPDIFRXCLK (SPDIFRX clock) - * @rmtoll PLLI2SCFGR PLLI2SP LL_RCC_PLLI2S_GetP - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLI2SP_DIV_2 - * @arg @ref LL_RCC_PLLI2SP_DIV_4 - * @arg @ref LL_RCC_PLLI2SP_DIV_6 - * @arg @ref LL_RCC_PLLI2SP_DIV_8 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetP(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SP)); -} -#endif /* RCC_PLLI2SCFGR_PLLI2SP */ - -#if defined(RCC_DCKCFGR_PLLI2SDIVQ) -/** - * @brief Get I2SPLL division factor for PLLI2SDIVQ - * @note used PLLSAICLK selected (SAI clock) - * @rmtoll DCKCFGR PLLI2SDIVQ LL_RCC_PLLI2S_GetDIVQ - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_1 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_2 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_3 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_4 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_5 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_6 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_7 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_8 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_9 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_10 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_11 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_12 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_13 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_14 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_15 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_16 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_17 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_18 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_19 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_20 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_21 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_22 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_23 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_24 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_25 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_26 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_27 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_28 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_29 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_30 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_31 - * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_32 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetDIVQ(void) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVQ)); -} -#endif /* RCC_DCKCFGR_PLLI2SDIVQ */ - -#if defined(RCC_DCKCFGR_PLLI2SDIVR) -/** - * @brief Get I2SPLL division factor for PLLI2SDIVR - * @note used PLLSAICLK selected (SAI clock) - * @rmtoll DCKCFGR PLLI2SDIVR LL_RCC_PLLI2S_GetDIVR - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_1 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_2 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_3 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_4 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_5 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_6 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_7 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_8 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_9 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_10 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_11 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_12 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_13 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_14 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_15 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_16 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_17 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_18 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_19 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_20 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_21 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_22 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_23 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_24 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_25 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_26 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_27 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_28 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_29 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_30 - * @arg @ref LL_RCC_PLLI2SDIVR_DIV_31 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetDIVR(void) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVR)); -} -#endif /* RCC_DCKCFGR_PLLI2SDIVR */ - -/** - * @brief Get division factor for PLLI2S input clock - * @rmtoll PLLCFGR PLLM LL_RCC_PLLI2S_GetDivider\n - * PLLI2SCFGR PLLI2SM LL_RCC_PLLI2S_GetDivider - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLI2SM_DIV_2 - * @arg @ref LL_RCC_PLLI2SM_DIV_3 - * @arg @ref LL_RCC_PLLI2SM_DIV_4 - * @arg @ref LL_RCC_PLLI2SM_DIV_5 - * @arg @ref LL_RCC_PLLI2SM_DIV_6 - * @arg @ref LL_RCC_PLLI2SM_DIV_7 - * @arg @ref LL_RCC_PLLI2SM_DIV_8 - * @arg @ref LL_RCC_PLLI2SM_DIV_9 - * @arg @ref LL_RCC_PLLI2SM_DIV_10 - * @arg @ref LL_RCC_PLLI2SM_DIV_11 - * @arg @ref LL_RCC_PLLI2SM_DIV_12 - * @arg @ref LL_RCC_PLLI2SM_DIV_13 - * @arg @ref LL_RCC_PLLI2SM_DIV_14 - * @arg @ref LL_RCC_PLLI2SM_DIV_15 - * @arg @ref LL_RCC_PLLI2SM_DIV_16 - * @arg @ref LL_RCC_PLLI2SM_DIV_17 - * @arg @ref LL_RCC_PLLI2SM_DIV_18 - * @arg @ref LL_RCC_PLLI2SM_DIV_19 - * @arg @ref LL_RCC_PLLI2SM_DIV_20 - * @arg @ref LL_RCC_PLLI2SM_DIV_21 - * @arg @ref LL_RCC_PLLI2SM_DIV_22 - * @arg @ref LL_RCC_PLLI2SM_DIV_23 - * @arg @ref LL_RCC_PLLI2SM_DIV_24 - * @arg @ref LL_RCC_PLLI2SM_DIV_25 - * @arg @ref LL_RCC_PLLI2SM_DIV_26 - * @arg @ref LL_RCC_PLLI2SM_DIV_27 - * @arg @ref LL_RCC_PLLI2SM_DIV_28 - * @arg @ref LL_RCC_PLLI2SM_DIV_29 - * @arg @ref LL_RCC_PLLI2SM_DIV_30 - * @arg @ref LL_RCC_PLLI2SM_DIV_31 - * @arg @ref LL_RCC_PLLI2SM_DIV_32 - * @arg @ref LL_RCC_PLLI2SM_DIV_33 - * @arg @ref LL_RCC_PLLI2SM_DIV_34 - * @arg @ref LL_RCC_PLLI2SM_DIV_35 - * @arg @ref LL_RCC_PLLI2SM_DIV_36 - * @arg @ref LL_RCC_PLLI2SM_DIV_37 - * @arg @ref LL_RCC_PLLI2SM_DIV_38 - * @arg @ref LL_RCC_PLLI2SM_DIV_39 - * @arg @ref LL_RCC_PLLI2SM_DIV_40 - * @arg @ref LL_RCC_PLLI2SM_DIV_41 - * @arg @ref LL_RCC_PLLI2SM_DIV_42 - * @arg @ref LL_RCC_PLLI2SM_DIV_43 - * @arg @ref LL_RCC_PLLI2SM_DIV_44 - * @arg @ref LL_RCC_PLLI2SM_DIV_45 - * @arg @ref LL_RCC_PLLI2SM_DIV_46 - * @arg @ref LL_RCC_PLLI2SM_DIV_47 - * @arg @ref LL_RCC_PLLI2SM_DIV_48 - * @arg @ref LL_RCC_PLLI2SM_DIV_49 - * @arg @ref LL_RCC_PLLI2SM_DIV_50 - * @arg @ref LL_RCC_PLLI2SM_DIV_51 - * @arg @ref LL_RCC_PLLI2SM_DIV_52 - * @arg @ref LL_RCC_PLLI2SM_DIV_53 - * @arg @ref LL_RCC_PLLI2SM_DIV_54 - * @arg @ref LL_RCC_PLLI2SM_DIV_55 - * @arg @ref LL_RCC_PLLI2SM_DIV_56 - * @arg @ref LL_RCC_PLLI2SM_DIV_57 - * @arg @ref LL_RCC_PLLI2SM_DIV_58 - * @arg @ref LL_RCC_PLLI2SM_DIV_59 - * @arg @ref LL_RCC_PLLI2SM_DIV_60 - * @arg @ref LL_RCC_PLLI2SM_DIV_61 - * @arg @ref LL_RCC_PLLI2SM_DIV_62 - * @arg @ref LL_RCC_PLLI2SM_DIV_63 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetDivider(void) -{ -#if defined(RCC_PLLI2SCFGR_PLLI2SM) - return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SM)); -#else - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM)); -#endif /* RCC_PLLI2SCFGR_PLLI2SM */ -} - -/** - * @brief Get the oscillator used as PLL clock source. - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLI2S_GetMainSource\n - * PLLI2SCFGR PLLI2SSRC LL_RCC_PLLI2S_GetMainSource - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @arg @ref LL_RCC_PLLI2SSOURCE_PIN (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetMainSource(void) -{ -#if defined(RCC_PLLI2SCFGR_PLLI2SSRC) - uint32_t pllsrc = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC); - uint32_t plli2sssrc0 = READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SSRC); - uint32_t plli2sssrc1 = READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SSRC) >> 15U; - return (uint32_t)(pllsrc | plli2sssrc0 | plli2sssrc1); -#else - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC)); -#endif /* RCC_PLLI2SCFGR_PLLI2SSRC */ -} - -/** - * @} - */ -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** @defgroup RCC_LL_EF_PLLSAI PLLSAI - * @{ - */ - -/** - * @brief Enable PLLSAI - * @rmtoll CR PLLSAION LL_RCC_PLLSAI_Enable - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLSAI_Enable(void) -{ - SET_BIT(RCC->CR, RCC_CR_PLLSAION); -} - -/** - * @brief Disable PLLSAI - * @rmtoll CR PLLSAION LL_RCC_PLLSAI_Disable - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLSAI_Disable(void) -{ - CLEAR_BIT(RCC->CR, RCC_CR_PLLSAION); -} - -/** - * @brief Check if PLLSAI Ready - * @rmtoll CR PLLSAIRDY LL_RCC_PLLSAI_IsReady - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_PLLSAI_IsReady(void) -{ - return (READ_BIT(RCC->CR, RCC_CR_PLLSAIRDY) == (RCC_CR_PLLSAIRDY)); -} - -/** - * @brief Configure PLLSAI used for SAI domain clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI(*) are disabled - * @note PLLN/PLLQ can be written only when PLLSAI is disabled - * @note This can be selected for SAI - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI_ConfigDomain_SAI\n - * PLLCFGR PLLM LL_RCC_PLLSAI_ConfigDomain_SAI\n - * PLLSAICFGR PLLSAIM LL_RCC_PLLSAI_ConfigDomain_SAI\n - * PLLSAICFGR PLLSAIN LL_RCC_PLLSAI_ConfigDomain_SAI\n - * PLLSAICFGR PLLSAIQ LL_RCC_PLLSAI_ConfigDomain_SAI\n - * DCKCFGR PLLSAIDIVQ LL_RCC_PLLSAI_ConfigDomain_SAI - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIM_DIV_2 - * @arg @ref LL_RCC_PLLSAIM_DIV_3 - * @arg @ref LL_RCC_PLLSAIM_DIV_4 - * @arg @ref LL_RCC_PLLSAIM_DIV_5 - * @arg @ref LL_RCC_PLLSAIM_DIV_6 - * @arg @ref LL_RCC_PLLSAIM_DIV_7 - * @arg @ref LL_RCC_PLLSAIM_DIV_8 - * @arg @ref LL_RCC_PLLSAIM_DIV_9 - * @arg @ref LL_RCC_PLLSAIM_DIV_10 - * @arg @ref LL_RCC_PLLSAIM_DIV_11 - * @arg @ref LL_RCC_PLLSAIM_DIV_12 - * @arg @ref LL_RCC_PLLSAIM_DIV_13 - * @arg @ref LL_RCC_PLLSAIM_DIV_14 - * @arg @ref LL_RCC_PLLSAIM_DIV_15 - * @arg @ref LL_RCC_PLLSAIM_DIV_16 - * @arg @ref LL_RCC_PLLSAIM_DIV_17 - * @arg @ref LL_RCC_PLLSAIM_DIV_18 - * @arg @ref LL_RCC_PLLSAIM_DIV_19 - * @arg @ref LL_RCC_PLLSAIM_DIV_20 - * @arg @ref LL_RCC_PLLSAIM_DIV_21 - * @arg @ref LL_RCC_PLLSAIM_DIV_22 - * @arg @ref LL_RCC_PLLSAIM_DIV_23 - * @arg @ref LL_RCC_PLLSAIM_DIV_24 - * @arg @ref LL_RCC_PLLSAIM_DIV_25 - * @arg @ref LL_RCC_PLLSAIM_DIV_26 - * @arg @ref LL_RCC_PLLSAIM_DIV_27 - * @arg @ref LL_RCC_PLLSAIM_DIV_28 - * @arg @ref LL_RCC_PLLSAIM_DIV_29 - * @arg @ref LL_RCC_PLLSAIM_DIV_30 - * @arg @ref LL_RCC_PLLSAIM_DIV_31 - * @arg @ref LL_RCC_PLLSAIM_DIV_32 - * @arg @ref LL_RCC_PLLSAIM_DIV_33 - * @arg @ref LL_RCC_PLLSAIM_DIV_34 - * @arg @ref LL_RCC_PLLSAIM_DIV_35 - * @arg @ref LL_RCC_PLLSAIM_DIV_36 - * @arg @ref LL_RCC_PLLSAIM_DIV_37 - * @arg @ref LL_RCC_PLLSAIM_DIV_38 - * @arg @ref LL_RCC_PLLSAIM_DIV_39 - * @arg @ref LL_RCC_PLLSAIM_DIV_40 - * @arg @ref LL_RCC_PLLSAIM_DIV_41 - * @arg @ref LL_RCC_PLLSAIM_DIV_42 - * @arg @ref LL_RCC_PLLSAIM_DIV_43 - * @arg @ref LL_RCC_PLLSAIM_DIV_44 - * @arg @ref LL_RCC_PLLSAIM_DIV_45 - * @arg @ref LL_RCC_PLLSAIM_DIV_46 - * @arg @ref LL_RCC_PLLSAIM_DIV_47 - * @arg @ref LL_RCC_PLLSAIM_DIV_48 - * @arg @ref LL_RCC_PLLSAIM_DIV_49 - * @arg @ref LL_RCC_PLLSAIM_DIV_50 - * @arg @ref LL_RCC_PLLSAIM_DIV_51 - * @arg @ref LL_RCC_PLLSAIM_DIV_52 - * @arg @ref LL_RCC_PLLSAIM_DIV_53 - * @arg @ref LL_RCC_PLLSAIM_DIV_54 - * @arg @ref LL_RCC_PLLSAIM_DIV_55 - * @arg @ref LL_RCC_PLLSAIM_DIV_56 - * @arg @ref LL_RCC_PLLSAIM_DIV_57 - * @arg @ref LL_RCC_PLLSAIM_DIV_58 - * @arg @ref LL_RCC_PLLSAIM_DIV_59 - * @arg @ref LL_RCC_PLLSAIM_DIV_60 - * @arg @ref LL_RCC_PLLSAIM_DIV_61 - * @arg @ref LL_RCC_PLLSAIM_DIV_62 - * @arg @ref LL_RCC_PLLSAIM_DIV_63 - * @param PLLN Between 49/50(*) and 432 - * - * (*) value not defined in all devices. - * @param PLLQ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIQ_DIV_2 - * @arg @ref LL_RCC_PLLSAIQ_DIV_3 - * @arg @ref LL_RCC_PLLSAIQ_DIV_4 - * @arg @ref LL_RCC_PLLSAIQ_DIV_5 - * @arg @ref LL_RCC_PLLSAIQ_DIV_6 - * @arg @ref LL_RCC_PLLSAIQ_DIV_7 - * @arg @ref LL_RCC_PLLSAIQ_DIV_8 - * @arg @ref LL_RCC_PLLSAIQ_DIV_9 - * @arg @ref LL_RCC_PLLSAIQ_DIV_10 - * @arg @ref LL_RCC_PLLSAIQ_DIV_11 - * @arg @ref LL_RCC_PLLSAIQ_DIV_12 - * @arg @ref LL_RCC_PLLSAIQ_DIV_13 - * @arg @ref LL_RCC_PLLSAIQ_DIV_14 - * @arg @ref LL_RCC_PLLSAIQ_DIV_15 - * @param PLLDIVQ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_1 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_2 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_3 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_4 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_5 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_6 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_7 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_8 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_9 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_10 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_11 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_12 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_13 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_14 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_15 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_16 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_17 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_18 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_19 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_20 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_21 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_22 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_23 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_24 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_25 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_26 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_27 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_28 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_29 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_30 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_31 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_32 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLSAI_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ, uint32_t PLLDIVQ) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source); -#if defined(RCC_PLLSAICFGR_PLLSAIM) - MODIFY_REG(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIM, PLLM); -#else - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, PLLM); -#endif /* RCC_PLLSAICFGR_PLLSAIM */ - MODIFY_REG(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIN | RCC_PLLSAICFGR_PLLSAIQ, PLLN << RCC_PLLSAICFGR_PLLSAIN_Pos | PLLQ); - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVQ, PLLDIVQ); -} - -#if defined(RCC_PLLSAICFGR_PLLSAIP) -/** - * @brief Configure PLLSAI used for 48Mhz domain clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI(*) are disabled - * @note PLLN/PLLP can be written only when PLLSAI is disabled - * @note This can be selected for USB, RNG, SDIO - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI_ConfigDomain_48M\n - * PLLCFGR PLLM LL_RCC_PLLSAI_ConfigDomain_48M\n - * PLLSAICFGR PLLSAIM LL_RCC_PLLSAI_ConfigDomain_48M\n - * PLLSAICFGR PLLSAIN LL_RCC_PLLSAI_ConfigDomain_48M\n - * PLLSAICFGR PLLSAIP LL_RCC_PLLSAI_ConfigDomain_48M - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIM_DIV_2 - * @arg @ref LL_RCC_PLLSAIM_DIV_3 - * @arg @ref LL_RCC_PLLSAIM_DIV_4 - * @arg @ref LL_RCC_PLLSAIM_DIV_5 - * @arg @ref LL_RCC_PLLSAIM_DIV_6 - * @arg @ref LL_RCC_PLLSAIM_DIV_7 - * @arg @ref LL_RCC_PLLSAIM_DIV_8 - * @arg @ref LL_RCC_PLLSAIM_DIV_9 - * @arg @ref LL_RCC_PLLSAIM_DIV_10 - * @arg @ref LL_RCC_PLLSAIM_DIV_11 - * @arg @ref LL_RCC_PLLSAIM_DIV_12 - * @arg @ref LL_RCC_PLLSAIM_DIV_13 - * @arg @ref LL_RCC_PLLSAIM_DIV_14 - * @arg @ref LL_RCC_PLLSAIM_DIV_15 - * @arg @ref LL_RCC_PLLSAIM_DIV_16 - * @arg @ref LL_RCC_PLLSAIM_DIV_17 - * @arg @ref LL_RCC_PLLSAIM_DIV_18 - * @arg @ref LL_RCC_PLLSAIM_DIV_19 - * @arg @ref LL_RCC_PLLSAIM_DIV_20 - * @arg @ref LL_RCC_PLLSAIM_DIV_21 - * @arg @ref LL_RCC_PLLSAIM_DIV_22 - * @arg @ref LL_RCC_PLLSAIM_DIV_23 - * @arg @ref LL_RCC_PLLSAIM_DIV_24 - * @arg @ref LL_RCC_PLLSAIM_DIV_25 - * @arg @ref LL_RCC_PLLSAIM_DIV_26 - * @arg @ref LL_RCC_PLLSAIM_DIV_27 - * @arg @ref LL_RCC_PLLSAIM_DIV_28 - * @arg @ref LL_RCC_PLLSAIM_DIV_29 - * @arg @ref LL_RCC_PLLSAIM_DIV_30 - * @arg @ref LL_RCC_PLLSAIM_DIV_31 - * @arg @ref LL_RCC_PLLSAIM_DIV_32 - * @arg @ref LL_RCC_PLLSAIM_DIV_33 - * @arg @ref LL_RCC_PLLSAIM_DIV_34 - * @arg @ref LL_RCC_PLLSAIM_DIV_35 - * @arg @ref LL_RCC_PLLSAIM_DIV_36 - * @arg @ref LL_RCC_PLLSAIM_DIV_37 - * @arg @ref LL_RCC_PLLSAIM_DIV_38 - * @arg @ref LL_RCC_PLLSAIM_DIV_39 - * @arg @ref LL_RCC_PLLSAIM_DIV_40 - * @arg @ref LL_RCC_PLLSAIM_DIV_41 - * @arg @ref LL_RCC_PLLSAIM_DIV_42 - * @arg @ref LL_RCC_PLLSAIM_DIV_43 - * @arg @ref LL_RCC_PLLSAIM_DIV_44 - * @arg @ref LL_RCC_PLLSAIM_DIV_45 - * @arg @ref LL_RCC_PLLSAIM_DIV_46 - * @arg @ref LL_RCC_PLLSAIM_DIV_47 - * @arg @ref LL_RCC_PLLSAIM_DIV_48 - * @arg @ref LL_RCC_PLLSAIM_DIV_49 - * @arg @ref LL_RCC_PLLSAIM_DIV_50 - * @arg @ref LL_RCC_PLLSAIM_DIV_51 - * @arg @ref LL_RCC_PLLSAIM_DIV_52 - * @arg @ref LL_RCC_PLLSAIM_DIV_53 - * @arg @ref LL_RCC_PLLSAIM_DIV_54 - * @arg @ref LL_RCC_PLLSAIM_DIV_55 - * @arg @ref LL_RCC_PLLSAIM_DIV_56 - * @arg @ref LL_RCC_PLLSAIM_DIV_57 - * @arg @ref LL_RCC_PLLSAIM_DIV_58 - * @arg @ref LL_RCC_PLLSAIM_DIV_59 - * @arg @ref LL_RCC_PLLSAIM_DIV_60 - * @arg @ref LL_RCC_PLLSAIM_DIV_61 - * @arg @ref LL_RCC_PLLSAIM_DIV_62 - * @arg @ref LL_RCC_PLLSAIM_DIV_63 - * @param PLLN Between 50 and 432 - * @param PLLP This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIP_DIV_2 - * @arg @ref LL_RCC_PLLSAIP_DIV_4 - * @arg @ref LL_RCC_PLLSAIP_DIV_6 - * @arg @ref LL_RCC_PLLSAIP_DIV_8 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLSAI_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source); -#if defined(RCC_PLLSAICFGR_PLLSAIM) - MODIFY_REG(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIM, PLLM); -#else - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, PLLM); -#endif /* RCC_PLLSAICFGR_PLLSAIM */ - MODIFY_REG(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIN | RCC_PLLSAICFGR_PLLSAIP, PLLN << RCC_PLLSAICFGR_PLLSAIN_Pos | PLLP); -} -#endif /* RCC_PLLSAICFGR_PLLSAIP */ - -#if defined(LTDC) -/** - * @brief Configure PLLSAI used for LTDC domain clock - * @note PLL Source and PLLM Divider can be written only when PLL, - * PLLI2S and PLLSAI(*) are disabled - * @note PLLN/PLLR can be written only when PLLSAI is disabled - * @note This can be selected for LTDC - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI_ConfigDomain_LTDC\n - * PLLCFGR PLLM LL_RCC_PLLSAI_ConfigDomain_LTDC\n - * PLLSAICFGR PLLSAIN LL_RCC_PLLSAI_ConfigDomain_LTDC\n - * PLLSAICFGR PLLSAIR LL_RCC_PLLSAI_ConfigDomain_LTDC\n - * DCKCFGR PLLSAIDIVR LL_RCC_PLLSAI_ConfigDomain_LTDC - * @param Source This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @param PLLM This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIM_DIV_2 - * @arg @ref LL_RCC_PLLSAIM_DIV_3 - * @arg @ref LL_RCC_PLLSAIM_DIV_4 - * @arg @ref LL_RCC_PLLSAIM_DIV_5 - * @arg @ref LL_RCC_PLLSAIM_DIV_6 - * @arg @ref LL_RCC_PLLSAIM_DIV_7 - * @arg @ref LL_RCC_PLLSAIM_DIV_8 - * @arg @ref LL_RCC_PLLSAIM_DIV_9 - * @arg @ref LL_RCC_PLLSAIM_DIV_10 - * @arg @ref LL_RCC_PLLSAIM_DIV_11 - * @arg @ref LL_RCC_PLLSAIM_DIV_12 - * @arg @ref LL_RCC_PLLSAIM_DIV_13 - * @arg @ref LL_RCC_PLLSAIM_DIV_14 - * @arg @ref LL_RCC_PLLSAIM_DIV_15 - * @arg @ref LL_RCC_PLLSAIM_DIV_16 - * @arg @ref LL_RCC_PLLSAIM_DIV_17 - * @arg @ref LL_RCC_PLLSAIM_DIV_18 - * @arg @ref LL_RCC_PLLSAIM_DIV_19 - * @arg @ref LL_RCC_PLLSAIM_DIV_20 - * @arg @ref LL_RCC_PLLSAIM_DIV_21 - * @arg @ref LL_RCC_PLLSAIM_DIV_22 - * @arg @ref LL_RCC_PLLSAIM_DIV_23 - * @arg @ref LL_RCC_PLLSAIM_DIV_24 - * @arg @ref LL_RCC_PLLSAIM_DIV_25 - * @arg @ref LL_RCC_PLLSAIM_DIV_26 - * @arg @ref LL_RCC_PLLSAIM_DIV_27 - * @arg @ref LL_RCC_PLLSAIM_DIV_28 - * @arg @ref LL_RCC_PLLSAIM_DIV_29 - * @arg @ref LL_RCC_PLLSAIM_DIV_30 - * @arg @ref LL_RCC_PLLSAIM_DIV_31 - * @arg @ref LL_RCC_PLLSAIM_DIV_32 - * @arg @ref LL_RCC_PLLSAIM_DIV_33 - * @arg @ref LL_RCC_PLLSAIM_DIV_34 - * @arg @ref LL_RCC_PLLSAIM_DIV_35 - * @arg @ref LL_RCC_PLLSAIM_DIV_36 - * @arg @ref LL_RCC_PLLSAIM_DIV_37 - * @arg @ref LL_RCC_PLLSAIM_DIV_38 - * @arg @ref LL_RCC_PLLSAIM_DIV_39 - * @arg @ref LL_RCC_PLLSAIM_DIV_40 - * @arg @ref LL_RCC_PLLSAIM_DIV_41 - * @arg @ref LL_RCC_PLLSAIM_DIV_42 - * @arg @ref LL_RCC_PLLSAIM_DIV_43 - * @arg @ref LL_RCC_PLLSAIM_DIV_44 - * @arg @ref LL_RCC_PLLSAIM_DIV_45 - * @arg @ref LL_RCC_PLLSAIM_DIV_46 - * @arg @ref LL_RCC_PLLSAIM_DIV_47 - * @arg @ref LL_RCC_PLLSAIM_DIV_48 - * @arg @ref LL_RCC_PLLSAIM_DIV_49 - * @arg @ref LL_RCC_PLLSAIM_DIV_50 - * @arg @ref LL_RCC_PLLSAIM_DIV_51 - * @arg @ref LL_RCC_PLLSAIM_DIV_52 - * @arg @ref LL_RCC_PLLSAIM_DIV_53 - * @arg @ref LL_RCC_PLLSAIM_DIV_54 - * @arg @ref LL_RCC_PLLSAIM_DIV_55 - * @arg @ref LL_RCC_PLLSAIM_DIV_56 - * @arg @ref LL_RCC_PLLSAIM_DIV_57 - * @arg @ref LL_RCC_PLLSAIM_DIV_58 - * @arg @ref LL_RCC_PLLSAIM_DIV_59 - * @arg @ref LL_RCC_PLLSAIM_DIV_60 - * @arg @ref LL_RCC_PLLSAIM_DIV_61 - * @arg @ref LL_RCC_PLLSAIM_DIV_62 - * @arg @ref LL_RCC_PLLSAIM_DIV_63 - * @param PLLN Between 49/50(*) and 432 - * - * (*) value not defined in all devices. - * @param PLLR This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIR_DIV_2 - * @arg @ref LL_RCC_PLLSAIR_DIV_3 - * @arg @ref LL_RCC_PLLSAIR_DIV_4 - * @arg @ref LL_RCC_PLLSAIR_DIV_5 - * @arg @ref LL_RCC_PLLSAIR_DIV_6 - * @arg @ref LL_RCC_PLLSAIR_DIV_7 - * @param PLLDIVR This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_2 - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_4 - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_8 - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_16 - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLLSAI_ConfigDomain_LTDC(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR, uint32_t PLLDIVR) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM); - MODIFY_REG(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIN | RCC_PLLSAICFGR_PLLSAIR, PLLN << RCC_PLLSAICFGR_PLLSAIN_Pos | PLLR); - MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVR, PLLDIVR); -} -#endif /* LTDC */ - -/** - * @brief Get division factor for PLLSAI input clock - * @rmtoll PLLCFGR PLLM LL_RCC_PLLSAI_GetDivider\n - * PLLSAICFGR PLLSAIM LL_RCC_PLLSAI_GetDivider - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLSAIM_DIV_2 - * @arg @ref LL_RCC_PLLSAIM_DIV_3 - * @arg @ref LL_RCC_PLLSAIM_DIV_4 - * @arg @ref LL_RCC_PLLSAIM_DIV_5 - * @arg @ref LL_RCC_PLLSAIM_DIV_6 - * @arg @ref LL_RCC_PLLSAIM_DIV_7 - * @arg @ref LL_RCC_PLLSAIM_DIV_8 - * @arg @ref LL_RCC_PLLSAIM_DIV_9 - * @arg @ref LL_RCC_PLLSAIM_DIV_10 - * @arg @ref LL_RCC_PLLSAIM_DIV_11 - * @arg @ref LL_RCC_PLLSAIM_DIV_12 - * @arg @ref LL_RCC_PLLSAIM_DIV_13 - * @arg @ref LL_RCC_PLLSAIM_DIV_14 - * @arg @ref LL_RCC_PLLSAIM_DIV_15 - * @arg @ref LL_RCC_PLLSAIM_DIV_16 - * @arg @ref LL_RCC_PLLSAIM_DIV_17 - * @arg @ref LL_RCC_PLLSAIM_DIV_18 - * @arg @ref LL_RCC_PLLSAIM_DIV_19 - * @arg @ref LL_RCC_PLLSAIM_DIV_20 - * @arg @ref LL_RCC_PLLSAIM_DIV_21 - * @arg @ref LL_RCC_PLLSAIM_DIV_22 - * @arg @ref LL_RCC_PLLSAIM_DIV_23 - * @arg @ref LL_RCC_PLLSAIM_DIV_24 - * @arg @ref LL_RCC_PLLSAIM_DIV_25 - * @arg @ref LL_RCC_PLLSAIM_DIV_26 - * @arg @ref LL_RCC_PLLSAIM_DIV_27 - * @arg @ref LL_RCC_PLLSAIM_DIV_28 - * @arg @ref LL_RCC_PLLSAIM_DIV_29 - * @arg @ref LL_RCC_PLLSAIM_DIV_30 - * @arg @ref LL_RCC_PLLSAIM_DIV_31 - * @arg @ref LL_RCC_PLLSAIM_DIV_32 - * @arg @ref LL_RCC_PLLSAIM_DIV_33 - * @arg @ref LL_RCC_PLLSAIM_DIV_34 - * @arg @ref LL_RCC_PLLSAIM_DIV_35 - * @arg @ref LL_RCC_PLLSAIM_DIV_36 - * @arg @ref LL_RCC_PLLSAIM_DIV_37 - * @arg @ref LL_RCC_PLLSAIM_DIV_38 - * @arg @ref LL_RCC_PLLSAIM_DIV_39 - * @arg @ref LL_RCC_PLLSAIM_DIV_40 - * @arg @ref LL_RCC_PLLSAIM_DIV_41 - * @arg @ref LL_RCC_PLLSAIM_DIV_42 - * @arg @ref LL_RCC_PLLSAIM_DIV_43 - * @arg @ref LL_RCC_PLLSAIM_DIV_44 - * @arg @ref LL_RCC_PLLSAIM_DIV_45 - * @arg @ref LL_RCC_PLLSAIM_DIV_46 - * @arg @ref LL_RCC_PLLSAIM_DIV_47 - * @arg @ref LL_RCC_PLLSAIM_DIV_48 - * @arg @ref LL_RCC_PLLSAIM_DIV_49 - * @arg @ref LL_RCC_PLLSAIM_DIV_50 - * @arg @ref LL_RCC_PLLSAIM_DIV_51 - * @arg @ref LL_RCC_PLLSAIM_DIV_52 - * @arg @ref LL_RCC_PLLSAIM_DIV_53 - * @arg @ref LL_RCC_PLLSAIM_DIV_54 - * @arg @ref LL_RCC_PLLSAIM_DIV_55 - * @arg @ref LL_RCC_PLLSAIM_DIV_56 - * @arg @ref LL_RCC_PLLSAIM_DIV_57 - * @arg @ref LL_RCC_PLLSAIM_DIV_58 - * @arg @ref LL_RCC_PLLSAIM_DIV_59 - * @arg @ref LL_RCC_PLLSAIM_DIV_60 - * @arg @ref LL_RCC_PLLSAIM_DIV_61 - * @arg @ref LL_RCC_PLLSAIM_DIV_62 - * @arg @ref LL_RCC_PLLSAIM_DIV_63 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetDivider(void) -{ -#if defined(RCC_PLLSAICFGR_PLLSAIM) - return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIM)); -#else - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM)); -#endif /* RCC_PLLSAICFGR_PLLSAIM */ -} - -/** - * @brief Get SAIPLL multiplication factor for VCO - * @rmtoll PLLSAICFGR PLLSAIN LL_RCC_PLLSAI_GetN - * @retval Between 49/50(*) and 432 - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetN(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIN) >> RCC_PLLSAICFGR_PLLSAIN_Pos); -} - -/** - * @brief Get SAIPLL division factor for PLLSAIQ - * @rmtoll PLLSAICFGR PLLSAIQ LL_RCC_PLLSAI_GetQ - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLSAIQ_DIV_2 - * @arg @ref LL_RCC_PLLSAIQ_DIV_3 - * @arg @ref LL_RCC_PLLSAIQ_DIV_4 - * @arg @ref LL_RCC_PLLSAIQ_DIV_5 - * @arg @ref LL_RCC_PLLSAIQ_DIV_6 - * @arg @ref LL_RCC_PLLSAIQ_DIV_7 - * @arg @ref LL_RCC_PLLSAIQ_DIV_8 - * @arg @ref LL_RCC_PLLSAIQ_DIV_9 - * @arg @ref LL_RCC_PLLSAIQ_DIV_10 - * @arg @ref LL_RCC_PLLSAIQ_DIV_11 - * @arg @ref LL_RCC_PLLSAIQ_DIV_12 - * @arg @ref LL_RCC_PLLSAIQ_DIV_13 - * @arg @ref LL_RCC_PLLSAIQ_DIV_14 - * @arg @ref LL_RCC_PLLSAIQ_DIV_15 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetQ(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIQ)); -} - -#if defined(RCC_PLLSAICFGR_PLLSAIR) -/** - * @brief Get SAIPLL division factor for PLLSAIR - * @note used for PLLSAICLK (SAI clock) - * @rmtoll PLLSAICFGR PLLSAIR LL_RCC_PLLSAI_GetR - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLSAIR_DIV_2 - * @arg @ref LL_RCC_PLLSAIR_DIV_3 - * @arg @ref LL_RCC_PLLSAIR_DIV_4 - * @arg @ref LL_RCC_PLLSAIR_DIV_5 - * @arg @ref LL_RCC_PLLSAIR_DIV_6 - * @arg @ref LL_RCC_PLLSAIR_DIV_7 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetR(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIR)); -} -#endif /* RCC_PLLSAICFGR_PLLSAIR */ - -#if defined(RCC_PLLSAICFGR_PLLSAIP) -/** - * @brief Get SAIPLL division factor for PLLSAIP - * @note used for PLL48MCLK (48M domain clock) - * @rmtoll PLLSAICFGR PLLSAIP LL_RCC_PLLSAI_GetP - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLSAIP_DIV_2 - * @arg @ref LL_RCC_PLLSAIP_DIV_4 - * @arg @ref LL_RCC_PLLSAIP_DIV_6 - * @arg @ref LL_RCC_PLLSAIP_DIV_8 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetP(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIP)); -} -#endif /* RCC_PLLSAICFGR_PLLSAIP */ - -/** - * @brief Get SAIPLL division factor for PLLSAIDIVQ - * @note used PLLSAICLK selected (SAI clock) - * @rmtoll DCKCFGR PLLSAIDIVQ LL_RCC_PLLSAI_GetDIVQ - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_1 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_2 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_3 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_4 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_5 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_6 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_7 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_8 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_9 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_10 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_11 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_12 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_13 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_14 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_15 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_16 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_17 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_18 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_19 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_20 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_21 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_22 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_23 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_24 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_25 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_26 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_27 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_28 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_29 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_30 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_31 - * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_32 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetDIVQ(void) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVQ)); -} - -#if defined(RCC_DCKCFGR_PLLSAIDIVR) -/** - * @brief Get SAIPLL division factor for PLLSAIDIVR - * @note used for LTDC domain clock - * @rmtoll DCKCFGR PLLSAIDIVR LL_RCC_PLLSAI_GetDIVR - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_2 - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_4 - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_8 - * @arg @ref LL_RCC_PLLSAIDIVR_DIV_16 - */ -__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetDIVR(void) -{ - return (uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVR)); -} -#endif /* RCC_DCKCFGR_PLLSAIDIVR */ - -/** - * @} - */ -#endif /* RCC_PLLSAI_SUPPORT */ - -/** @defgroup RCC_LL_EF_FLAG_Management FLAG Management - * @{ - */ - -/** - * @brief Clear LSI ready interrupt flag - * @rmtoll CIR LSIRDYC LL_RCC_ClearFlag_LSIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_LSIRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_LSIRDYC); -} - -/** - * @brief Clear LSE ready interrupt flag - * @rmtoll CIR LSERDYC LL_RCC_ClearFlag_LSERDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_LSERDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_LSERDYC); -} - -/** - * @brief Clear HSI ready interrupt flag - * @rmtoll CIR HSIRDYC LL_RCC_ClearFlag_HSIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_HSIRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_HSIRDYC); -} - -/** - * @brief Clear HSE ready interrupt flag - * @rmtoll CIR HSERDYC LL_RCC_ClearFlag_HSERDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_HSERDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_HSERDYC); -} - -/** - * @brief Clear PLL ready interrupt flag - * @rmtoll CIR PLLRDYC LL_RCC_ClearFlag_PLLRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_PLLRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_PLLRDYC); -} - -#if defined(RCC_PLLI2S_SUPPORT) -/** - * @brief Clear PLLI2S ready interrupt flag - * @rmtoll CIR PLLI2SRDYC LL_RCC_ClearFlag_PLLI2SRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_PLLI2SRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYC); -} - -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** - * @brief Clear PLLSAI ready interrupt flag - * @rmtoll CIR PLLSAIRDYC LL_RCC_ClearFlag_PLLSAIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_PLLSAIRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYC); -} - -#endif /* RCC_PLLSAI_SUPPORT */ - -/** - * @brief Clear Clock security system interrupt flag - * @rmtoll CIR CSSC LL_RCC_ClearFlag_HSECSS - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearFlag_HSECSS(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_CSSC); -} - -/** - * @brief Check if LSI ready interrupt occurred or not - * @rmtoll CIR LSIRDYF LL_RCC_IsActiveFlag_LSIRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSIRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_LSIRDYF) == (RCC_CIR_LSIRDYF)); -} - -/** - * @brief Check if LSE ready interrupt occurred or not - * @rmtoll CIR LSERDYF LL_RCC_IsActiveFlag_LSERDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSERDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_LSERDYF) == (RCC_CIR_LSERDYF)); -} - -/** - * @brief Check if HSI ready interrupt occurred or not - * @rmtoll CIR HSIRDYF LL_RCC_IsActiveFlag_HSIRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSIRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_HSIRDYF) == (RCC_CIR_HSIRDYF)); -} - -/** - * @brief Check if HSE ready interrupt occurred or not - * @rmtoll CIR HSERDYF LL_RCC_IsActiveFlag_HSERDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSERDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_HSERDYF) == (RCC_CIR_HSERDYF)); -} - -/** - * @brief Check if PLL ready interrupt occurred or not - * @rmtoll CIR PLLRDYF LL_RCC_IsActiveFlag_PLLRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_PLLRDYF) == (RCC_CIR_PLLRDYF)); -} - -#if defined(RCC_PLLI2S_SUPPORT) -/** - * @brief Check if PLLI2S ready interrupt occurred or not - * @rmtoll CIR PLLI2SRDYF LL_RCC_IsActiveFlag_PLLI2SRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLI2SRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYF) == (RCC_CIR_PLLI2SRDYF)); -} -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** - * @brief Check if PLLSAI ready interrupt occurred or not - * @rmtoll CIR PLLSAIRDYF LL_RCC_IsActiveFlag_PLLSAIRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLSAIRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYF) == (RCC_CIR_PLLSAIRDYF)); -} -#endif /* RCC_PLLSAI_SUPPORT */ - -/** - * @brief Check if Clock security system interrupt occurred or not - * @rmtoll CIR CSSF LL_RCC_IsActiveFlag_HSECSS - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSECSS(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_CSSF) == (RCC_CIR_CSSF)); -} - -/** - * @brief Check if RCC flag Independent Watchdog reset is set or not. - * @rmtoll CSR IWDGRSTF LL_RCC_IsActiveFlag_IWDGRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_IWDGRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_IWDGRSTF) == (RCC_CSR_IWDGRSTF)); -} - -/** - * @brief Check if RCC flag Low Power reset is set or not. - * @rmtoll CSR LPWRRSTF LL_RCC_IsActiveFlag_LPWRRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LPWRRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_LPWRRSTF) == (RCC_CSR_LPWRRSTF)); -} - -/** - * @brief Check if RCC flag Pin reset is set or not. - * @rmtoll CSR PINRSTF LL_RCC_IsActiveFlag_PINRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PINRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_PINRSTF) == (RCC_CSR_PINRSTF)); -} - -/** - * @brief Check if RCC flag POR/PDR reset is set or not. - * @rmtoll CSR PORRSTF LL_RCC_IsActiveFlag_PORRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PORRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_PORRSTF) == (RCC_CSR_PORRSTF)); -} - -/** - * @brief Check if RCC flag Software reset is set or not. - * @rmtoll CSR SFTRSTF LL_RCC_IsActiveFlag_SFTRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_SFTRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_SFTRSTF) == (RCC_CSR_SFTRSTF)); -} - -/** - * @brief Check if RCC flag Window Watchdog reset is set or not. - * @rmtoll CSR WWDGRSTF LL_RCC_IsActiveFlag_WWDGRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_WWDGRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_WWDGRSTF) == (RCC_CSR_WWDGRSTF)); -} - -#if defined(RCC_CSR_BORRSTF) -/** - * @brief Check if RCC flag BOR reset is set or not. - * @rmtoll CSR BORRSTF LL_RCC_IsActiveFlag_BORRST - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_BORRST(void) -{ - return (READ_BIT(RCC->CSR, RCC_CSR_BORRSTF) == (RCC_CSR_BORRSTF)); -} -#endif /* RCC_CSR_BORRSTF */ - -/** - * @brief Set RMVF bit to clear the reset flags. - * @rmtoll CSR RMVF LL_RCC_ClearResetFlags - * @retval None - */ -__STATIC_INLINE void LL_RCC_ClearResetFlags(void) -{ - SET_BIT(RCC->CSR, RCC_CSR_RMVF); -} - -/** - * @} - */ - -/** @defgroup RCC_LL_EF_IT_Management IT Management - * @{ - */ - -/** - * @brief Enable LSI ready interrupt - * @rmtoll CIR LSIRDYIE LL_RCC_EnableIT_LSIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_LSIRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_LSIRDYIE); -} - -/** - * @brief Enable LSE ready interrupt - * @rmtoll CIR LSERDYIE LL_RCC_EnableIT_LSERDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_LSERDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_LSERDYIE); -} - -/** - * @brief Enable HSI ready interrupt - * @rmtoll CIR HSIRDYIE LL_RCC_EnableIT_HSIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_HSIRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_HSIRDYIE); -} - -/** - * @brief Enable HSE ready interrupt - * @rmtoll CIR HSERDYIE LL_RCC_EnableIT_HSERDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_HSERDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_HSERDYIE); -} - -/** - * @brief Enable PLL ready interrupt - * @rmtoll CIR PLLRDYIE LL_RCC_EnableIT_PLLRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_PLLRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_PLLRDYIE); -} - -#if defined(RCC_PLLI2S_SUPPORT) -/** - * @brief Enable PLLI2S ready interrupt - * @rmtoll CIR PLLI2SRDYIE LL_RCC_EnableIT_PLLI2SRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_PLLI2SRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYIE); -} -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** - * @brief Enable PLLSAI ready interrupt - * @rmtoll CIR PLLSAIRDYIE LL_RCC_EnableIT_PLLSAIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_EnableIT_PLLSAIRDY(void) -{ - SET_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYIE); -} -#endif /* RCC_PLLSAI_SUPPORT */ - -/** - * @brief Disable LSI ready interrupt - * @rmtoll CIR LSIRDYIE LL_RCC_DisableIT_LSIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_LSIRDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_LSIRDYIE); -} - -/** - * @brief Disable LSE ready interrupt - * @rmtoll CIR LSERDYIE LL_RCC_DisableIT_LSERDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_LSERDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_LSERDYIE); -} - -/** - * @brief Disable HSI ready interrupt - * @rmtoll CIR HSIRDYIE LL_RCC_DisableIT_HSIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_HSIRDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_HSIRDYIE); -} - -/** - * @brief Disable HSE ready interrupt - * @rmtoll CIR HSERDYIE LL_RCC_DisableIT_HSERDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_HSERDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_HSERDYIE); -} - -/** - * @brief Disable PLL ready interrupt - * @rmtoll CIR PLLRDYIE LL_RCC_DisableIT_PLLRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_PLLRDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_PLLRDYIE); -} - -#if defined(RCC_PLLI2S_SUPPORT) -/** - * @brief Disable PLLI2S ready interrupt - * @rmtoll CIR PLLI2SRDYIE LL_RCC_DisableIT_PLLI2SRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_PLLI2SRDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYIE); -} - -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** - * @brief Disable PLLSAI ready interrupt - * @rmtoll CIR PLLSAIRDYIE LL_RCC_DisableIT_PLLSAIRDY - * @retval None - */ -__STATIC_INLINE void LL_RCC_DisableIT_PLLSAIRDY(void) -{ - CLEAR_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYIE); -} -#endif /* RCC_PLLSAI_SUPPORT */ - -/** - * @brief Checks if LSI ready interrupt source is enabled or disabled. - * @rmtoll CIR LSIRDYIE LL_RCC_IsEnabledIT_LSIRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSIRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_LSIRDYIE) == (RCC_CIR_LSIRDYIE)); -} - -/** - * @brief Checks if LSE ready interrupt source is enabled or disabled. - * @rmtoll CIR LSERDYIE LL_RCC_IsEnabledIT_LSERDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSERDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_LSERDYIE) == (RCC_CIR_LSERDYIE)); -} - -/** - * @brief Checks if HSI ready interrupt source is enabled or disabled. - * @rmtoll CIR HSIRDYIE LL_RCC_IsEnabledIT_HSIRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSIRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_HSIRDYIE) == (RCC_CIR_HSIRDYIE)); -} - -/** - * @brief Checks if HSE ready interrupt source is enabled or disabled. - * @rmtoll CIR HSERDYIE LL_RCC_IsEnabledIT_HSERDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSERDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_HSERDYIE) == (RCC_CIR_HSERDYIE)); -} - -/** - * @brief Checks if PLL ready interrupt source is enabled or disabled. - * @rmtoll CIR PLLRDYIE LL_RCC_IsEnabledIT_PLLRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_PLLRDYIE) == (RCC_CIR_PLLRDYIE)); -} - -#if defined(RCC_PLLI2S_SUPPORT) -/** - * @brief Checks if PLLI2S ready interrupt source is enabled or disabled. - * @rmtoll CIR PLLI2SRDYIE LL_RCC_IsEnabledIT_PLLI2SRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLI2SRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYIE) == (RCC_CIR_PLLI2SRDYIE)); -} - -#endif /* RCC_PLLI2S_SUPPORT */ - -#if defined(RCC_PLLSAI_SUPPORT) -/** - * @brief Checks if PLLSAI ready interrupt source is enabled or disabled. - * @rmtoll CIR PLLSAIRDYIE LL_RCC_IsEnabledIT_PLLSAIRDY - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLSAIRDY(void) -{ - return (READ_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYIE) == (RCC_CIR_PLLSAIRDYIE)); -} -#endif /* RCC_PLLSAI_SUPPORT */ - -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup RCC_LL_EF_Init De-initialization function - * @{ - */ -ErrorStatus LL_RCC_DeInit(void); -/** - * @} - */ - -/** @defgroup RCC_LL_EF_Get_Freq Get system and peripherals clocks frequency functions - * @{ - */ -void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks); -#if defined(FMPI2C1) -uint32_t LL_RCC_GetFMPI2CClockFreq(uint32_t FMPI2CxSource); -#endif /* FMPI2C1 */ -#if defined(LPTIM1) -uint32_t LL_RCC_GetLPTIMClockFreq(uint32_t LPTIMxSource); -#endif /* LPTIM1 */ -#if defined(SAI1) -uint32_t LL_RCC_GetSAIClockFreq(uint32_t SAIxSource); -#endif /* SAI1 */ -#if defined(SDIO) -uint32_t LL_RCC_GetSDIOClockFreq(uint32_t SDIOxSource); -#endif /* SDIO */ -#if defined(RNG) -uint32_t LL_RCC_GetRNGClockFreq(uint32_t RNGxSource); -#endif /* RNG */ -#if defined(USB_OTG_FS) || defined(USB_OTG_HS) -uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource); -#endif /* USB_OTG_FS || USB_OTG_HS */ -#if defined(DFSDM1_Channel0) -uint32_t LL_RCC_GetDFSDMClockFreq(uint32_t DFSDMxSource); -uint32_t LL_RCC_GetDFSDMAudioClockFreq(uint32_t DFSDMxSource); -#endif /* DFSDM1_Channel0 */ -uint32_t LL_RCC_GetI2SClockFreq(uint32_t I2SxSource); -#if defined(CEC) -uint32_t LL_RCC_GetCECClockFreq(uint32_t CECxSource); -#endif /* CEC */ -#if defined(LTDC) -uint32_t LL_RCC_GetLTDCClockFreq(uint32_t LTDCxSource); -#endif /* LTDC */ -#if defined(SPDIFRX) -uint32_t LL_RCC_GetSPDIFRXClockFreq(uint32_t SPDIFRXxSource); -#endif /* SPDIFRX */ -#if defined(DSI) -uint32_t LL_RCC_GetDSIClockFreq(uint32_t DSIxSource); -#endif /* DSI */ -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined(RCC) */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_RCC_H */ - +/** + ****************************************************************************** + * @file stm32f4xx_ll_rcc.h + * @author MCD Application Team + * @brief Header file of RCC LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_LL_RCC_H +#define __STM32F4xx_LL_RCC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @defgroup RCC_LL RCC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup RCC_LL_Private_Variables RCC Private Variables + * @{ + */ + +#if defined(RCC_DCKCFGR_PLLSAIDIVR) +static const uint8_t aRCC_PLLSAIDIVRPrescTable[4] = {2, 4, 8, 16}; +#endif /* RCC_DCKCFGR_PLLSAIDIVR */ + +/** + * @} + */ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_Private_Macros RCC Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_Exported_Types RCC Exported Types + * @{ + */ + +/** @defgroup LL_ES_CLOCK_FREQ Clocks Frequency Structure + * @{ + */ + +/** + * @brief RCC Clocks Frequency Structure + */ +typedef struct +{ + uint32_t SYSCLK_Frequency; /*!< SYSCLK clock frequency */ + uint32_t HCLK_Frequency; /*!< HCLK clock frequency */ + uint32_t PCLK1_Frequency; /*!< PCLK1 clock frequency */ + uint32_t PCLK2_Frequency; /*!< PCLK2 clock frequency */ +} LL_RCC_ClocksTypeDef; + +/** + * @} + */ + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_LL_EC_OSC_VALUES Oscillator Values adaptation + * @brief Defines used to adapt values of different oscillators + * @note These values could be modified in the user environment according to + * HW set-up. + * @{ + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE 25000000U /*!< Value of the HSE oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) +#define HSI_VALUE 16000000U /*!< Value of the HSI oscillator in Hz */ +#endif /* HSI_VALUE */ + +#if !defined (LSE_VALUE) +#define LSE_VALUE 32768U /*!< Value of the LSE oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSI_VALUE) +#define LSI_VALUE 32000U /*!< Value of the LSI oscillator in Hz */ +#endif /* LSI_VALUE */ + +#if !defined (EXTERNAL_CLOCK_VALUE) +#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the I2S_CKIN external oscillator in Hz */ +#endif /* EXTERNAL_CLOCK_VALUE */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_RCC_WriteReg function + * @{ + */ +#define LL_RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC /*!< LSI Ready Interrupt Clear */ +#define LL_RCC_CIR_LSERDYC RCC_CIR_LSERDYC /*!< LSE Ready Interrupt Clear */ +#define LL_RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC /*!< HSI Ready Interrupt Clear */ +#define LL_RCC_CIR_HSERDYC RCC_CIR_HSERDYC /*!< HSE Ready Interrupt Clear */ +#define LL_RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC /*!< PLL Ready Interrupt Clear */ +#if defined(RCC_PLLI2S_SUPPORT) +#define LL_RCC_CIR_PLLI2SRDYC RCC_CIR_PLLI2SRDYC /*!< PLLI2S Ready Interrupt Clear */ +#endif /* RCC_PLLI2S_SUPPORT */ +#if defined(RCC_PLLSAI_SUPPORT) +#define LL_RCC_CIR_PLLSAIRDYC RCC_CIR_PLLSAIRDYC /*!< PLLSAI Ready Interrupt Clear */ +#endif /* RCC_PLLSAI_SUPPORT */ +#define LL_RCC_CIR_CSSC RCC_CIR_CSSC /*!< Clock Security System Interrupt Clear */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_RCC_ReadReg function + * @{ + */ +#define LL_RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF /*!< LSI Ready Interrupt flag */ +#define LL_RCC_CIR_LSERDYF RCC_CIR_LSERDYF /*!< LSE Ready Interrupt flag */ +#define LL_RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF /*!< HSI Ready Interrupt flag */ +#define LL_RCC_CIR_HSERDYF RCC_CIR_HSERDYF /*!< HSE Ready Interrupt flag */ +#define LL_RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF /*!< PLL Ready Interrupt flag */ +#if defined(RCC_PLLI2S_SUPPORT) +#define LL_RCC_CIR_PLLI2SRDYF RCC_CIR_PLLI2SRDYF /*!< PLLI2S Ready Interrupt flag */ +#endif /* RCC_PLLI2S_SUPPORT */ +#if defined(RCC_PLLSAI_SUPPORT) +#define LL_RCC_CIR_PLLSAIRDYF RCC_CIR_PLLSAIRDYF /*!< PLLSAI Ready Interrupt flag */ +#endif /* RCC_PLLSAI_SUPPORT */ +#define LL_RCC_CIR_CSSF RCC_CIR_CSSF /*!< Clock Security System Interrupt flag */ +#define LL_RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF /*!< Low-Power reset flag */ +#define LL_RCC_CSR_PINRSTF RCC_CSR_PINRSTF /*!< PIN reset flag */ +#define LL_RCC_CSR_PORRSTF RCC_CSR_PORRSTF /*!< POR/PDR reset flag */ +#define LL_RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF /*!< Software Reset flag */ +#define LL_RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */ +#define LL_RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */ +#if defined(RCC_CSR_BORRSTF) +#define LL_RCC_CSR_BORRSTF RCC_CSR_BORRSTF /*!< BOR reset flag */ +#endif /* RCC_CSR_BORRSTF */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_RCC_ReadReg and LL_RCC_WriteReg functions + * @{ + */ +#define LL_RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE /*!< LSI Ready Interrupt Enable */ +#define LL_RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE /*!< LSE Ready Interrupt Enable */ +#define LL_RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE /*!< HSI Ready Interrupt Enable */ +#define LL_RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE /*!< HSE Ready Interrupt Enable */ +#define LL_RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE /*!< PLL Ready Interrupt Enable */ +#if defined(RCC_PLLI2S_SUPPORT) +#define LL_RCC_CIR_PLLI2SRDYIE RCC_CIR_PLLI2SRDYIE /*!< PLLI2S Ready Interrupt Enable */ +#endif /* RCC_PLLI2S_SUPPORT */ +#if defined(RCC_PLLSAI_SUPPORT) +#define LL_RCC_CIR_PLLSAIRDYIE RCC_CIR_PLLSAIRDYIE /*!< PLLSAI Ready Interrupt Enable */ +#endif /* RCC_PLLSAI_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYS_CLKSOURCE System clock switch + * @{ + */ +#define LL_RCC_SYS_CLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selection as system clock */ +#define LL_RCC_SYS_CLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selection as system clock */ +#define LL_RCC_SYS_CLKSOURCE_PLL RCC_CFGR_SW_PLL /*!< PLL selection as system clock */ +#if defined(RCC_CFGR_SW_PLLR) +#define LL_RCC_SYS_CLKSOURCE_PLLR RCC_CFGR_SW_PLLR /*!< PLLR selection as system clock */ +#endif /* RCC_CFGR_SW_PLLR */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYS_CLKSOURCE_STATUS System clock switch status + * @{ + */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_PLL RCC_CFGR_SWS_PLL /*!< PLL used as system clock */ +#if defined(RCC_PLLR_SYSCLK_SUPPORT) +#define LL_RCC_SYS_CLKSOURCE_STATUS_PLLR RCC_CFGR_SWS_PLLR /*!< PLLR used as system clock */ +#endif /* RCC_PLLR_SYSCLK_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYSCLK_DIV AHB prescaler + * @{ + */ +#define LL_RCC_SYSCLK_DIV_1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */ +#define LL_RCC_SYSCLK_DIV_2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */ +#define LL_RCC_SYSCLK_DIV_4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */ +#define LL_RCC_SYSCLK_DIV_8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */ +#define LL_RCC_SYSCLK_DIV_16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */ +#define LL_RCC_SYSCLK_DIV_64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */ +#define LL_RCC_SYSCLK_DIV_128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */ +#define LL_RCC_SYSCLK_DIV_256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */ +#define LL_RCC_SYSCLK_DIV_512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_APB1_DIV APB low-speed prescaler (APB1) + * @{ + */ +#define LL_RCC_APB1_DIV_1 RCC_CFGR_PPRE1_DIV1 /*!< HCLK not divided */ +#define LL_RCC_APB1_DIV_2 RCC_CFGR_PPRE1_DIV2 /*!< HCLK divided by 2 */ +#define LL_RCC_APB1_DIV_4 RCC_CFGR_PPRE1_DIV4 /*!< HCLK divided by 4 */ +#define LL_RCC_APB1_DIV_8 RCC_CFGR_PPRE1_DIV8 /*!< HCLK divided by 8 */ +#define LL_RCC_APB1_DIV_16 RCC_CFGR_PPRE1_DIV16 /*!< HCLK divided by 16 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_APB2_DIV APB high-speed prescaler (APB2) + * @{ + */ +#define LL_RCC_APB2_DIV_1 RCC_CFGR_PPRE2_DIV1 /*!< HCLK not divided */ +#define LL_RCC_APB2_DIV_2 RCC_CFGR_PPRE2_DIV2 /*!< HCLK divided by 2 */ +#define LL_RCC_APB2_DIV_4 RCC_CFGR_PPRE2_DIV4 /*!< HCLK divided by 4 */ +#define LL_RCC_APB2_DIV_8 RCC_CFGR_PPRE2_DIV8 /*!< HCLK divided by 8 */ +#define LL_RCC_APB2_DIV_16 RCC_CFGR_PPRE2_DIV16 /*!< HCLK divided by 16 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCOxSOURCE MCO source selection + * @{ + */ +#define LL_RCC_MCO1SOURCE_HSI (uint32_t)(RCC_CFGR_MCO1|0x00000000U) /*!< HSI selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_LSE (uint32_t)(RCC_CFGR_MCO1|(RCC_CFGR_MCO1_0 >> 16U)) /*!< LSE selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_HSE (uint32_t)(RCC_CFGR_MCO1|(RCC_CFGR_MCO1_1 >> 16U)) /*!< HSE selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_PLLCLK (uint32_t)(RCC_CFGR_MCO1|((RCC_CFGR_MCO1_1|RCC_CFGR_MCO1_0) >> 16U)) /*!< PLLCLK selection as MCO1 source */ +#if defined(RCC_CFGR_MCO2) +#define LL_RCC_MCO2SOURCE_SYSCLK (uint32_t)(RCC_CFGR_MCO2|0x00000000U) /*!< SYSCLK selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_PLLI2S (uint32_t)(RCC_CFGR_MCO2|(RCC_CFGR_MCO2_0 >> 16U)) /*!< PLLI2S selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_HSE (uint32_t)(RCC_CFGR_MCO2|(RCC_CFGR_MCO2_1 >> 16U)) /*!< HSE selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_PLLCLK (uint32_t)(RCC_CFGR_MCO2|((RCC_CFGR_MCO2_1|RCC_CFGR_MCO2_0) >> 16U)) /*!< PLLCLK selection as MCO2 source */ +#endif /* RCC_CFGR_MCO2 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCOx_DIV MCO prescaler + * @{ + */ +#define LL_RCC_MCO1_DIV_1 (uint32_t)(RCC_CFGR_MCO1PRE|0x00000000U) /*!< MCO1 not divided */ +#define LL_RCC_MCO1_DIV_2 (uint32_t)(RCC_CFGR_MCO1PRE|(RCC_CFGR_MCO1PRE_2 >> 16U)) /*!< MCO1 divided by 2 */ +#define LL_RCC_MCO1_DIV_3 (uint32_t)(RCC_CFGR_MCO1PRE|((RCC_CFGR_MCO1PRE_2|RCC_CFGR_MCO1PRE_0) >> 16U)) /*!< MCO1 divided by 3 */ +#define LL_RCC_MCO1_DIV_4 (uint32_t)(RCC_CFGR_MCO1PRE|((RCC_CFGR_MCO1PRE_2|RCC_CFGR_MCO1PRE_1) >> 16U)) /*!< MCO1 divided by 4 */ +#define LL_RCC_MCO1_DIV_5 (uint32_t)(RCC_CFGR_MCO1PRE|(RCC_CFGR_MCO1PRE >> 16U)) /*!< MCO1 divided by 5 */ +#if defined(RCC_CFGR_MCO2PRE) +#define LL_RCC_MCO2_DIV_1 (uint32_t)(RCC_CFGR_MCO2PRE|0x00000000U) /*!< MCO2 not divided */ +#define LL_RCC_MCO2_DIV_2 (uint32_t)(RCC_CFGR_MCO2PRE|(RCC_CFGR_MCO2PRE_2 >> 16U)) /*!< MCO2 divided by 2 */ +#define LL_RCC_MCO2_DIV_3 (uint32_t)(RCC_CFGR_MCO2PRE|((RCC_CFGR_MCO2PRE_2|RCC_CFGR_MCO2PRE_0) >> 16U)) /*!< MCO2 divided by 3 */ +#define LL_RCC_MCO2_DIV_4 (uint32_t)(RCC_CFGR_MCO2PRE|((RCC_CFGR_MCO2PRE_2|RCC_CFGR_MCO2PRE_1) >> 16U)) /*!< MCO2 divided by 4 */ +#define LL_RCC_MCO2_DIV_5 (uint32_t)(RCC_CFGR_MCO2PRE|(RCC_CFGR_MCO2PRE >> 16U)) /*!< MCO2 divided by 5 */ +#endif /* RCC_CFGR_MCO2PRE */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_RTC_HSEDIV HSE prescaler for RTC clock + * @{ + */ +#define LL_RCC_RTC_NOCLOCK 0x00000000U /*!< HSE not divided */ +#define LL_RCC_RTC_HSE_DIV_2 RCC_CFGR_RTCPRE_1 /*!< HSE clock divided by 2 */ +#define LL_RCC_RTC_HSE_DIV_3 (RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 3 */ +#define LL_RCC_RTC_HSE_DIV_4 RCC_CFGR_RTCPRE_2 /*!< HSE clock divided by 4 */ +#define LL_RCC_RTC_HSE_DIV_5 (RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 5 */ +#define LL_RCC_RTC_HSE_DIV_6 (RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 6 */ +#define LL_RCC_RTC_HSE_DIV_7 (RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 7 */ +#define LL_RCC_RTC_HSE_DIV_8 RCC_CFGR_RTCPRE_3 /*!< HSE clock divided by 8 */ +#define LL_RCC_RTC_HSE_DIV_9 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 9 */ +#define LL_RCC_RTC_HSE_DIV_10 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 10 */ +#define LL_RCC_RTC_HSE_DIV_11 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 11 */ +#define LL_RCC_RTC_HSE_DIV_12 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2) /*!< HSE clock divided by 12 */ +#define LL_RCC_RTC_HSE_DIV_13 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 13 */ +#define LL_RCC_RTC_HSE_DIV_14 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 14 */ +#define LL_RCC_RTC_HSE_DIV_15 (RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 15 */ +#define LL_RCC_RTC_HSE_DIV_16 RCC_CFGR_RTCPRE_4 /*!< HSE clock divided by 16 */ +#define LL_RCC_RTC_HSE_DIV_17 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 17 */ +#define LL_RCC_RTC_HSE_DIV_18 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 18 */ +#define LL_RCC_RTC_HSE_DIV_19 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 19 */ +#define LL_RCC_RTC_HSE_DIV_20 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2) /*!< HSE clock divided by 20 */ +#define LL_RCC_RTC_HSE_DIV_21 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 21 */ +#define LL_RCC_RTC_HSE_DIV_22 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 22 */ +#define LL_RCC_RTC_HSE_DIV_23 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 23 */ +#define LL_RCC_RTC_HSE_DIV_24 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3) /*!< HSE clock divided by 24 */ +#define LL_RCC_RTC_HSE_DIV_25 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 25 */ +#define LL_RCC_RTC_HSE_DIV_26 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 26 */ +#define LL_RCC_RTC_HSE_DIV_27 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 27 */ +#define LL_RCC_RTC_HSE_DIV_28 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2) /*!< HSE clock divided by 28 */ +#define LL_RCC_RTC_HSE_DIV_29 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 29 */ +#define LL_RCC_RTC_HSE_DIV_30 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) /*!< HSE clock divided by 30 */ +#define LL_RCC_RTC_HSE_DIV_31 (RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) /*!< HSE clock divided by 31 */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_EC_PERIPH_FREQUENCY Peripheral clock frequency + * @{ + */ +#define LL_RCC_PERIPH_FREQUENCY_NO 0x00000000U /*!< No clock enabled for the peripheral */ +#define LL_RCC_PERIPH_FREQUENCY_NA 0xFFFFFFFFU /*!< Frequency cannot be provided as external clock */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +#if defined(FMPI2C1) +/** @defgroup RCC_LL_EC_FMPI2C1_CLKSOURCE Peripheral FMPI2C clock source selection + * @{ + */ +#define LL_RCC_FMPI2C1_CLKSOURCE_PCLK1 0x00000000U /*!< PCLK1 clock used as FMPI2C1 clock source */ +#define LL_RCC_FMPI2C1_CLKSOURCE_SYSCLK RCC_DCKCFGR2_FMPI2C1SEL_0 /*!< SYSCLK clock used as FMPI2C1 clock source */ +#define LL_RCC_FMPI2C1_CLKSOURCE_HSI RCC_DCKCFGR2_FMPI2C1SEL_1 /*!< HSI clock used as FMPI2C1 clock source */ +/** + * @} + */ +#endif /* FMPI2C1 */ + +#if defined(LPTIM1) +/** @defgroup RCC_LL_EC_LPTIM1_CLKSOURCE Peripheral LPTIM clock source selection + * @{ + */ +#define LL_RCC_LPTIM1_CLKSOURCE_PCLK1 0x00000000U /*!< PCLK1 clock used as LPTIM1 clock */ +#define LL_RCC_LPTIM1_CLKSOURCE_HSI RCC_DCKCFGR2_LPTIM1SEL_0 /*!< LSI oscillator clock used as LPTIM1 clock */ +#define LL_RCC_LPTIM1_CLKSOURCE_LSI RCC_DCKCFGR2_LPTIM1SEL_1 /*!< HSI oscillator clock used as LPTIM1 clock */ +#define LL_RCC_LPTIM1_CLKSOURCE_LSE (uint32_t)(RCC_DCKCFGR2_LPTIM1SEL_1 | RCC_DCKCFGR2_LPTIM1SEL_0) /*!< LSE oscillator clock used as LPTIM1 clock */ +/** + * @} + */ +#endif /* LPTIM1 */ + +#if defined(SAI1) +/** @defgroup RCC_LL_EC_SAIx_CLKSOURCE Peripheral SAI clock source selection + * @{ + */ +#if defined(RCC_DCKCFGR_SAI1SRC) +#define LL_RCC_SAI1_CLKSOURCE_PLLSAI (uint32_t)(RCC_DCKCFGR_SAI1SRC | 0x00000000U) /*!< PLLSAI clock used as SAI1 clock source */ +#define LL_RCC_SAI1_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_SAI1SRC | (RCC_DCKCFGR_SAI1SRC_0 >> 16)) /*!< PLLI2S clock used as SAI1 clock source */ +#define LL_RCC_SAI1_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_SAI1SRC | (RCC_DCKCFGR_SAI1SRC_1 >> 16)) /*!< PLL clock used as SAI1 clock source */ +#define LL_RCC_SAI1_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_SAI1SRC | (RCC_DCKCFGR_SAI1SRC >> 16)) /*!< External pin clock used as SAI1 clock source */ +#endif /* RCC_DCKCFGR_SAI1SRC */ +#if defined(RCC_DCKCFGR_SAI2SRC) +#define LL_RCC_SAI2_CLKSOURCE_PLLSAI (uint32_t)(RCC_DCKCFGR_SAI2SRC | 0x00000000U) /*!< PLLSAI clock used as SAI2 clock source */ +#define LL_RCC_SAI2_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_SAI2SRC | (RCC_DCKCFGR_SAI2SRC_0 >> 16)) /*!< PLLI2S clock used as SAI2 clock source */ +#define LL_RCC_SAI2_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_SAI2SRC | (RCC_DCKCFGR_SAI2SRC_1 >> 16)) /*!< PLL clock used as SAI2 clock source */ +#define LL_RCC_SAI2_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR_SAI2SRC | (RCC_DCKCFGR_SAI2SRC >> 16)) /*!< PLL Main clock used as SAI2 clock source */ +#endif /* RCC_DCKCFGR_SAI2SRC */ +#if defined(RCC_DCKCFGR_SAI1ASRC) +#if defined(RCC_SAI1A_PLLSOURCE_SUPPORT) +#define LL_RCC_SAI1_A_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_SAI1ASRC | 0x00000000U) /*!< PLLI2S clock used as SAI1 block A clock source */ +#define LL_RCC_SAI1_A_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_SAI1ASRC | (RCC_DCKCFGR_SAI1ASRC_0 >> 16)) /*!< External pin used as SAI1 block A clock source */ +#define LL_RCC_SAI1_A_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_SAI1ASRC | (RCC_DCKCFGR_SAI1ASRC_1 >> 16)) /*!< PLL clock used as SAI1 block A clock source */ +#define LL_RCC_SAI1_A_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR_SAI1ASRC | (RCC_DCKCFGR_SAI1ASRC >> 16)) /*!< PLL Main clock used as SAI1 block A clock source */ +#else +#define LL_RCC_SAI1_A_CLKSOURCE_PLLSAI (uint32_t)(RCC_DCKCFGR_SAI1ASRC | 0x00000000U) /*!< PLLSAI clock used as SAI1 block A clock source */ +#define LL_RCC_SAI1_A_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_SAI1ASRC | (RCC_DCKCFGR_SAI1ASRC_0 >> 16)) /*!< PLLI2S clock used as SAI1 block A clock source */ +#define LL_RCC_SAI1_A_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_SAI1ASRC | (RCC_DCKCFGR_SAI1ASRC_1 >> 16)) /*!< External pin clock used as SAI1 block A clock source */ +#endif /* RCC_SAI1A_PLLSOURCE_SUPPORT */ +#endif /* RCC_DCKCFGR_SAI1ASRC */ +#if defined(RCC_DCKCFGR_SAI1BSRC) +#if defined(RCC_SAI1B_PLLSOURCE_SUPPORT) +#define LL_RCC_SAI1_B_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_SAI1BSRC | 0x00000000U) /*!< PLLI2S clock used as SAI1 block B clock source */ +#define LL_RCC_SAI1_B_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_SAI1BSRC | (RCC_DCKCFGR_SAI1BSRC_0 >> 16)) /*!< External pin used as SAI1 block B clock source */ +#define LL_RCC_SAI1_B_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_SAI1BSRC | (RCC_DCKCFGR_SAI1BSRC_1 >> 16)) /*!< PLL clock used as SAI1 block B clock source */ +#define LL_RCC_SAI1_B_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR_SAI1BSRC | (RCC_DCKCFGR_SAI1BSRC >> 16)) /*!< PLL Main clock used as SAI1 block B clock source */ +#else +#define LL_RCC_SAI1_B_CLKSOURCE_PLLSAI (uint32_t)(RCC_DCKCFGR_SAI1BSRC | 0x00000000U) /*!< PLLSAI clock used as SAI1 block B clock source */ +#define LL_RCC_SAI1_B_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_SAI1BSRC | (RCC_DCKCFGR_SAI1BSRC_0 >> 16)) /*!< PLLI2S clock used as SAI1 block B clock source */ +#define LL_RCC_SAI1_B_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_SAI1BSRC | (RCC_DCKCFGR_SAI1BSRC_1 >> 16)) /*!< External pin clock used as SAI1 block B clock source */ +#endif /* RCC_SAI1B_PLLSOURCE_SUPPORT */ +#endif /* RCC_DCKCFGR_SAI1BSRC */ +/** + * @} + */ +#endif /* SAI1 */ + +#if defined(RCC_DCKCFGR_SDIOSEL) || defined(RCC_DCKCFGR2_SDIOSEL) +/** @defgroup RCC_LL_EC_SDIOx_CLKSOURCE Peripheral SDIO clock source selection + * @{ + */ +#define LL_RCC_SDIO_CLKSOURCE_PLL48CLK 0x00000000U /*!< PLL 48M domain clock used as SDIO clock */ +#if defined(RCC_DCKCFGR_SDIOSEL) +#define LL_RCC_SDIO_CLKSOURCE_SYSCLK RCC_DCKCFGR_SDIOSEL /*!< System clock clock used as SDIO clock */ +#else +#define LL_RCC_SDIO_CLKSOURCE_SYSCLK RCC_DCKCFGR2_SDIOSEL /*!< System clock clock used as SDIO clock */ +#endif /* RCC_DCKCFGR_SDIOSEL */ +/** + * @} + */ +#endif /* RCC_DCKCFGR_SDIOSEL || RCC_DCKCFGR2_SDIOSEL */ + +#if defined(DSI) +/** @defgroup RCC_LL_EC_DSI_CLKSOURCE Peripheral DSI clock source selection + * @{ + */ +#define LL_RCC_DSI_CLKSOURCE_PHY 0x00000000U /*!< DSI-PHY clock used as DSI byte lane clock source */ +#define LL_RCC_DSI_CLKSOURCE_PLL RCC_DCKCFGR_DSISEL /*!< PLL clock used as DSI byte lane clock source */ +/** + * @} + */ +#endif /* DSI */ + +#if defined(CEC) +/** @defgroup RCC_LL_EC_CEC_CLKSOURCE Peripheral CEC clock source selection + * @{ + */ +#define LL_RCC_CEC_CLKSOURCE_HSI_DIV488 0x00000000U /*!< HSI oscillator clock divided by 488 used as CEC clock */ +#define LL_RCC_CEC_CLKSOURCE_LSE RCC_DCKCFGR2_CECSEL /*!< LSE oscillator clock used as CEC clock */ +/** + * @} + */ +#endif /* CEC */ + +/** @defgroup RCC_LL_EC_I2S1_CLKSOURCE Peripheral I2S clock source selection + * @{ + */ +#if defined(RCC_CFGR_I2SSRC) +#define LL_RCC_I2S1_CLKSOURCE_PLLI2S 0x00000000U /*!< I2S oscillator clock used as I2S1 clock */ +#define LL_RCC_I2S1_CLKSOURCE_PIN RCC_CFGR_I2SSRC /*!< External pin clock used as I2S1 clock */ +#endif /* RCC_CFGR_I2SSRC */ +#if defined(RCC_DCKCFGR_I2SSRC) +#define LL_RCC_I2S1_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_I2SSRC | 0x00000000U) /*!< PLL clock used as I2S1 clock source */ +#define LL_RCC_I2S1_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_I2SSRC | (RCC_DCKCFGR_I2SSRC_0 >> 16)) /*!< External pin used as I2S1 clock source */ +#define LL_RCC_I2S1_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR_I2SSRC | (RCC_DCKCFGR_I2SSRC_1 >> 16)) /*!< PLL Main clock used as I2S1 clock source */ +#endif /* RCC_DCKCFGR_I2SSRC */ +#if defined(RCC_DCKCFGR_I2S1SRC) +#define LL_RCC_I2S1_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_I2S1SRC | 0x00000000U) /*!< PLLI2S clock used as I2S1 clock source */ +#define LL_RCC_I2S1_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_I2S1SRC | (RCC_DCKCFGR_I2S1SRC_0 >> 16)) /*!< External pin used as I2S1 clock source */ +#define LL_RCC_I2S1_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_I2S1SRC | (RCC_DCKCFGR_I2S1SRC_1 >> 16)) /*!< PLL clock used as I2S1 clock source */ +#define LL_RCC_I2S1_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR_I2S1SRC | (RCC_DCKCFGR_I2S1SRC >> 16)) /*!< PLL Main clock used as I2S1 clock source */ +#endif /* RCC_DCKCFGR_I2S1SRC */ +#if defined(RCC_DCKCFGR_I2S2SRC) +#define LL_RCC_I2S2_CLKSOURCE_PLLI2S (uint32_t)(RCC_DCKCFGR_I2S2SRC | 0x00000000U) /*!< PLLI2S clock used as I2S2 clock source */ +#define LL_RCC_I2S2_CLKSOURCE_PIN (uint32_t)(RCC_DCKCFGR_I2S2SRC | (RCC_DCKCFGR_I2S2SRC_0 >> 16)) /*!< External pin used as I2S2 clock source */ +#define LL_RCC_I2S2_CLKSOURCE_PLL (uint32_t)(RCC_DCKCFGR_I2S2SRC | (RCC_DCKCFGR_I2S2SRC_1 >> 16)) /*!< PLL clock used as I2S2 clock source */ +#define LL_RCC_I2S2_CLKSOURCE_PLLSRC (uint32_t)(RCC_DCKCFGR_I2S2SRC | (RCC_DCKCFGR_I2S2SRC >> 16)) /*!< PLL Main clock used as I2S2 clock source */ +#endif /* RCC_DCKCFGR_I2S2SRC */ +/** + * @} + */ + +#if defined(RCC_DCKCFGR_CK48MSEL) || defined(RCC_DCKCFGR2_CK48MSEL) +/** @defgroup RCC_LL_EC_CK48M_CLKSOURCE Peripheral 48Mhz domain clock source selection + * @{ + */ +#if defined(RCC_DCKCFGR_CK48MSEL) +#define LL_RCC_CK48M_CLKSOURCE_PLL 0x00000000U /*!< PLL oscillator clock used as 48Mhz domain clock */ +#define LL_RCC_CK48M_CLKSOURCE_PLLSAI RCC_DCKCFGR_CK48MSEL /*!< PLLSAI oscillator clock used as 48Mhz domain clock */ +#endif /* RCC_DCKCFGR_CK48MSEL */ +#if defined(RCC_DCKCFGR2_CK48MSEL) +#define LL_RCC_CK48M_CLKSOURCE_PLL 0x00000000U /*!< PLL oscillator clock used as 48Mhz domain clock */ +#if defined(RCC_PLLSAI_SUPPORT) +#define LL_RCC_CK48M_CLKSOURCE_PLLSAI RCC_DCKCFGR2_CK48MSEL /*!< PLLSAI oscillator clock used as 48Mhz domain clock */ +#endif /* RCC_PLLSAI_SUPPORT */ +#if defined(RCC_PLLI2SCFGR_PLLI2SQ) && !defined(RCC_DCKCFGR_PLLI2SDIVQ) +#define LL_RCC_CK48M_CLKSOURCE_PLLI2S RCC_DCKCFGR2_CK48MSEL /*!< PLLI2S oscillator clock used as 48Mhz domain clock */ +#endif /* RCC_PLLI2SCFGR_PLLI2SQ && !RCC_DCKCFGR_PLLI2SDIVQ */ +#endif /* RCC_DCKCFGR2_CK48MSEL */ +/** + * @} + */ + +#if defined(RNG) +/** @defgroup RCC_LL_EC_RNG_CLKSOURCE Peripheral RNG clock source selection + * @{ + */ +#define LL_RCC_RNG_CLKSOURCE_PLL LL_RCC_CK48M_CLKSOURCE_PLL /*!< PLL clock used as RNG clock source */ +#if defined(RCC_PLLSAI_SUPPORT) +#define LL_RCC_RNG_CLKSOURCE_PLLSAI LL_RCC_CK48M_CLKSOURCE_PLLSAI /*!< PLLSAI clock used as RNG clock source */ +#endif /* RCC_PLLSAI_SUPPORT */ +#if defined(RCC_PLLI2SCFGR_PLLI2SQ) && !defined(RCC_DCKCFGR_PLLI2SDIVQ) +#define LL_RCC_RNG_CLKSOURCE_PLLI2S LL_RCC_CK48M_CLKSOURCE_PLLI2S /*!< PLLI2S clock used as RNG clock source */ +#endif /* RCC_PLLI2SCFGR_PLLI2SQ && !RCC_DCKCFGR_PLLI2SDIVQ */ +/** + * @} + */ +#endif /* RNG */ + +#if defined(USB_OTG_FS) || defined(USB_OTG_HS) +/** @defgroup RCC_LL_EC_USB_CLKSOURCE Peripheral USB clock source selection + * @{ + */ +#define LL_RCC_USB_CLKSOURCE_PLL LL_RCC_CK48M_CLKSOURCE_PLL /*!< PLL clock used as USB clock source */ +#if defined(RCC_PLLSAI_SUPPORT) +#define LL_RCC_USB_CLKSOURCE_PLLSAI LL_RCC_CK48M_CLKSOURCE_PLLSAI /*!< PLLSAI clock used as USB clock source */ +#endif /* RCC_PLLSAI_SUPPORT */ +#if defined(RCC_PLLI2SCFGR_PLLI2SQ) && !defined(RCC_DCKCFGR_PLLI2SDIVQ) +#define LL_RCC_USB_CLKSOURCE_PLLI2S LL_RCC_CK48M_CLKSOURCE_PLLI2S /*!< PLLI2S clock used as USB clock source */ +#endif /* RCC_PLLI2SCFGR_PLLI2SQ && !RCC_DCKCFGR_PLLI2SDIVQ */ +/** + * @} + */ +#endif /* USB_OTG_FS || USB_OTG_HS */ + +#endif /* RCC_DCKCFGR_CK48MSEL || RCC_DCKCFGR2_CK48MSEL */ + +#if defined(DFSDM1_Channel0) || defined(DFSDM2_Channel0) +/** @defgroup RCC_LL_EC_DFSDM1_AUDIO_CLKSOURCE Peripheral DFSDM Audio clock source selection + * @{ + */ +#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE_I2S1 (uint32_t)(RCC_DCKCFGR_CKDFSDM1ASEL | 0x00000000U) /*!< I2S1 clock used as DFSDM1 Audio clock source */ +#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE_I2S2 (uint32_t)(RCC_DCKCFGR_CKDFSDM1ASEL | (RCC_DCKCFGR_CKDFSDM1ASEL << 16)) /*!< I2S2 clock used as DFSDM1 Audio clock source */ +#if defined(DFSDM2_Channel0) +#define LL_RCC_DFSDM2_AUDIO_CLKSOURCE_I2S1 (uint32_t)(RCC_DCKCFGR_CKDFSDM2ASEL | 0x00000000U) /*!< I2S1 clock used as DFSDM2 Audio clock source */ +#define LL_RCC_DFSDM2_AUDIO_CLKSOURCE_I2S2 (uint32_t)(RCC_DCKCFGR_CKDFSDM2ASEL | (RCC_DCKCFGR_CKDFSDM2ASEL << 16)) /*!< I2S2 clock used as DFSDM2 Audio clock source */ +#endif /* DFSDM2_Channel0 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_DFSDM1_CLKSOURCE Peripheral DFSDM clock source selection + * @{ + */ +#define LL_RCC_DFSDM1_CLKSOURCE_PCLK2 0x00000000U /*!< PCLK2 clock used as DFSDM1 clock */ +#define LL_RCC_DFSDM1_CLKSOURCE_SYSCLK RCC_DCKCFGR_CKDFSDM1SEL /*!< System clock used as DFSDM1 clock */ +#if defined(DFSDM2_Channel0) +#define LL_RCC_DFSDM2_CLKSOURCE_PCLK2 0x00000000U /*!< PCLK2 clock used as DFSDM2 clock */ +#define LL_RCC_DFSDM2_CLKSOURCE_SYSCLK RCC_DCKCFGR_CKDFSDM1SEL /*!< System clock used as DFSDM2 clock */ +#endif /* DFSDM2_Channel0 */ +/** + * @} + */ +#endif /* DFSDM1_Channel0 || DFSDM2_Channel0 */ + +#if defined(FMPI2C1) +/** @defgroup RCC_LL_EC_FMPI2C1 Peripheral FMPI2C get clock source + * @{ + */ +#define LL_RCC_FMPI2C1_CLKSOURCE RCC_DCKCFGR2_FMPI2C1SEL /*!< FMPI2C1 Clock source selection */ +/** + * @} + */ +#endif /* FMPI2C1 */ + +#if defined(SPDIFRX) +/** @defgroup RCC_LL_EC_SPDIFRX_CLKSOURCE Peripheral SPDIFRX clock source selection + * @{ + */ +#define LL_RCC_SPDIFRX1_CLKSOURCE_PLL 0x00000000U /*!< PLL clock used as SPDIFRX clock source */ +#define LL_RCC_SPDIFRX1_CLKSOURCE_PLLI2S RCC_DCKCFGR2_SPDIFRXSEL /*!< PLLI2S clock used as SPDIFRX clock source */ +/** + * @} + */ +#endif /* SPDIFRX */ + +#if defined(LPTIM1) +/** @defgroup RCC_LL_EC_LPTIM1 Peripheral LPTIM get clock source + * @{ + */ +#define LL_RCC_LPTIM1_CLKSOURCE RCC_DCKCFGR2_LPTIM1SEL /*!< LPTIM1 Clock source selection */ +/** + * @} + */ +#endif /* LPTIM1 */ + +#if defined(SAI1) +/** @defgroup RCC_LL_EC_SAIx Peripheral SAI get clock source + * @{ + */ +#if defined(RCC_DCKCFGR_SAI1ASRC) +#define LL_RCC_SAI1_A_CLKSOURCE RCC_DCKCFGR_SAI1ASRC /*!< SAI1 block A Clock source selection */ +#endif /* RCC_DCKCFGR_SAI1ASRC */ +#if defined(RCC_DCKCFGR_SAI1BSRC) +#define LL_RCC_SAI1_B_CLKSOURCE RCC_DCKCFGR_SAI1BSRC /*!< SAI1 block B Clock source selection */ +#endif /* RCC_DCKCFGR_SAI1BSRC */ +#if defined(RCC_DCKCFGR_SAI1SRC) +#define LL_RCC_SAI1_CLKSOURCE RCC_DCKCFGR_SAI1SRC /*!< SAI1 Clock source selection */ +#endif /* RCC_DCKCFGR_SAI1SRC */ +#if defined(RCC_DCKCFGR_SAI2SRC) +#define LL_RCC_SAI2_CLKSOURCE RCC_DCKCFGR_SAI2SRC /*!< SAI2 Clock source selection */ +#endif /* RCC_DCKCFGR_SAI2SRC */ +/** + * @} + */ +#endif /* SAI1 */ + +#if defined(SDIO) +/** @defgroup RCC_LL_EC_SDIOx Peripheral SDIO get clock source + * @{ + */ +#if defined(RCC_DCKCFGR_SDIOSEL) +#define LL_RCC_SDIO_CLKSOURCE RCC_DCKCFGR_SDIOSEL /*!< SDIO Clock source selection */ +#elif defined(RCC_DCKCFGR2_SDIOSEL) +#define LL_RCC_SDIO_CLKSOURCE RCC_DCKCFGR2_SDIOSEL /*!< SDIO Clock source selection */ +#else +#define LL_RCC_SDIO_CLKSOURCE RCC_PLLCFGR_PLLQ /*!< SDIO Clock source selection */ +#endif +/** + * @} + */ +#endif /* SDIO */ + +#if defined(RCC_DCKCFGR_CK48MSEL) || defined(RCC_DCKCFGR2_CK48MSEL) +/** @defgroup RCC_LL_EC_CK48M Peripheral CK48M get clock source + * @{ + */ +#if defined(RCC_DCKCFGR_CK48MSEL) +#define LL_RCC_CK48M_CLKSOURCE RCC_DCKCFGR_CK48MSEL /*!< CK48M Domain clock source selection */ +#endif /* RCC_DCKCFGR_CK48MSEL */ +#if defined(RCC_DCKCFGR2_CK48MSEL) +#define LL_RCC_CK48M_CLKSOURCE RCC_DCKCFGR2_CK48MSEL /*!< CK48M Domain clock source selection */ +#endif /* RCC_DCKCFGR_CK48MSEL */ +/** + * @} + */ +#endif /* RCC_DCKCFGR_CK48MSEL || RCC_DCKCFGR2_CK48MSEL */ + +#if defined(RNG) +/** @defgroup RCC_LL_EC_RNG Peripheral RNG get clock source + * @{ + */ +#if defined(RCC_DCKCFGR_CK48MSEL) || defined(RCC_DCKCFGR2_CK48MSEL) +#define LL_RCC_RNG_CLKSOURCE LL_RCC_CK48M_CLKSOURCE /*!< RNG Clock source selection */ +#else +#define LL_RCC_RNG_CLKSOURCE RCC_PLLCFGR_PLLQ /*!< RNG Clock source selection */ +#endif /* RCC_DCKCFGR_CK48MSEL || RCC_DCKCFGR2_CK48MSEL */ +/** + * @} + */ +#endif /* RNG */ + +#if defined(USB_OTG_FS) || defined(USB_OTG_HS) +/** @defgroup RCC_LL_EC_USB Peripheral USB get clock source + * @{ + */ +#if defined(RCC_DCKCFGR_CK48MSEL) || defined(RCC_DCKCFGR2_CK48MSEL) +#define LL_RCC_USB_CLKSOURCE LL_RCC_CK48M_CLKSOURCE /*!< USB Clock source selection */ +#else +#define LL_RCC_USB_CLKSOURCE RCC_PLLCFGR_PLLQ /*!< USB Clock source selection */ +#endif /* RCC_DCKCFGR_CK48MSEL || RCC_DCKCFGR2_CK48MSEL */ +/** + * @} + */ +#endif /* USB_OTG_FS || USB_OTG_HS */ + +#if defined(CEC) +/** @defgroup RCC_LL_EC_CEC Peripheral CEC get clock source + * @{ + */ +#define LL_RCC_CEC_CLKSOURCE RCC_DCKCFGR2_CECSEL /*!< CEC Clock source selection */ +/** + * @} + */ +#endif /* CEC */ + +/** @defgroup RCC_LL_EC_I2S1 Peripheral I2S get clock source + * @{ + */ +#if defined(RCC_CFGR_I2SSRC) +#define LL_RCC_I2S1_CLKSOURCE RCC_CFGR_I2SSRC /*!< I2S1 Clock source selection */ +#endif /* RCC_CFGR_I2SSRC */ +#if defined(RCC_DCKCFGR_I2SSRC) +#define LL_RCC_I2S1_CLKSOURCE RCC_DCKCFGR_I2SSRC /*!< I2S1 Clock source selection */ +#endif /* RCC_DCKCFGR_I2SSRC */ +#if defined(RCC_DCKCFGR_I2S1SRC) +#define LL_RCC_I2S1_CLKSOURCE RCC_DCKCFGR_I2S1SRC /*!< I2S1 Clock source selection */ +#endif /* RCC_DCKCFGR_I2S1SRC */ +#if defined(RCC_DCKCFGR_I2S2SRC) +#define LL_RCC_I2S2_CLKSOURCE RCC_DCKCFGR_I2S2SRC /*!< I2S2 Clock source selection */ +#endif /* RCC_DCKCFGR_I2S2SRC */ +/** + * @} + */ + +#if defined(DFSDM1_Channel0) || defined(DFSDM2_Channel0) +/** @defgroup RCC_LL_EC_DFSDM_AUDIO Peripheral DFSDM Audio get clock source + * @{ + */ +#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE RCC_DCKCFGR_CKDFSDM1ASEL /*!< DFSDM1 Audio Clock source selection */ +#if defined(DFSDM2_Channel0) +#define LL_RCC_DFSDM2_AUDIO_CLKSOURCE RCC_DCKCFGR_CKDFSDM2ASEL /*!< DFSDM2 Audio Clock source selection */ +#endif /* DFSDM2_Channel0 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_DFSDM Peripheral DFSDM get clock source + * @{ + */ +#define LL_RCC_DFSDM1_CLKSOURCE RCC_DCKCFGR_CKDFSDM1SEL /*!< DFSDM1 Clock source selection */ +#if defined(DFSDM2_Channel0) +#define LL_RCC_DFSDM2_CLKSOURCE RCC_DCKCFGR_CKDFSDM1SEL /*!< DFSDM2 Clock source selection */ +#endif /* DFSDM2_Channel0 */ +/** + * @} + */ +#endif /* DFSDM1_Channel0 || DFSDM2_Channel0 */ + +#if defined(SPDIFRX) +/** @defgroup RCC_LL_EC_SPDIFRX Peripheral SPDIFRX get clock source + * @{ + */ +#define LL_RCC_SPDIFRX1_CLKSOURCE RCC_DCKCFGR2_SPDIFRXSEL /*!< SPDIFRX Clock source selection */ +/** + * @} + */ +#endif /* SPDIFRX */ + +#if defined(DSI) +/** @defgroup RCC_LL_EC_DSI Peripheral DSI get clock source + * @{ + */ +#define LL_RCC_DSI_CLKSOURCE RCC_DCKCFGR_DSISEL /*!< DSI Clock source selection */ +/** + * @} + */ +#endif /* DSI */ + +#if defined(LTDC) +/** @defgroup RCC_LL_EC_LTDC Peripheral LTDC get clock source + * @{ + */ +#define LL_RCC_LTDC_CLKSOURCE RCC_DCKCFGR_PLLSAIDIVR /*!< LTDC Clock source selection */ +/** + * @} + */ +#endif /* LTDC */ + + +/** @defgroup RCC_LL_EC_RTC_CLKSOURCE RTC clock source selection + * @{ + */ +#define LL_RCC_RTC_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_HSE RCC_BDCR_RTCSEL /*!< HSE oscillator clock divided by HSE prescaler used as RTC clock */ +/** + * @} + */ + +#if defined(RCC_DCKCFGR_TIMPRE) +/** @defgroup RCC_LL_EC_TIM_CLKPRESCALER Timers clocks prescalers selection + * @{ + */ +#define LL_RCC_TIM_PRESCALER_TWICE 0x00000000U /*!< Timers clock to twice PCLK */ +#define LL_RCC_TIM_PRESCALER_FOUR_TIMES RCC_DCKCFGR_TIMPRE /*!< Timers clock to four time PCLK */ +/** + * @} + */ +#endif /* RCC_DCKCFGR_TIMPRE */ + +/** @defgroup RCC_LL_EC_PLLSOURCE PLL, PLLI2S and PLLSAI entry clock source + * @{ + */ +#define LL_RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI /*!< HSI16 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE /*!< HSE clock selected as PLL entry clock source */ +#if defined(RCC_PLLI2SCFGR_PLLI2SSRC) +#define LL_RCC_PLLI2SSOURCE_PIN (RCC_PLLI2SCFGR_PLLI2SSRC | 0x80U) /*!< I2S External pin input clock selected as PLLI2S entry clock source */ +#endif /* RCC_PLLI2SCFGR_PLLI2SSRC */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLLM_DIV PLL, PLLI2S and PLLSAI division factor + * @{ + */ +#define LL_RCC_PLLM_DIV_2 (RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 2 */ +#define LL_RCC_PLLM_DIV_3 (RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 3 */ +#define LL_RCC_PLLM_DIV_4 (RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 4 */ +#define LL_RCC_PLLM_DIV_5 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 5 */ +#define LL_RCC_PLLM_DIV_6 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 6 */ +#define LL_RCC_PLLM_DIV_7 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 7 */ +#define LL_RCC_PLLM_DIV_8 (RCC_PLLCFGR_PLLM_3) /*!< PLL, PLLI2S and PLLSAI division factor by 8 */ +#define LL_RCC_PLLM_DIV_9 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 9 */ +#define LL_RCC_PLLM_DIV_10 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 10 */ +#define LL_RCC_PLLM_DIV_11 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 11 */ +#define LL_RCC_PLLM_DIV_12 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 12 */ +#define LL_RCC_PLLM_DIV_13 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 13 */ +#define LL_RCC_PLLM_DIV_14 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 14 */ +#define LL_RCC_PLLM_DIV_15 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 15 */ +#define LL_RCC_PLLM_DIV_16 (RCC_PLLCFGR_PLLM_4) /*!< PLL, PLLI2S and PLLSAI division factor by 16 */ +#define LL_RCC_PLLM_DIV_17 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 17 */ +#define LL_RCC_PLLM_DIV_18 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 18 */ +#define LL_RCC_PLLM_DIV_19 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 19 */ +#define LL_RCC_PLLM_DIV_20 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 20 */ +#define LL_RCC_PLLM_DIV_21 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 21 */ +#define LL_RCC_PLLM_DIV_22 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 22 */ +#define LL_RCC_PLLM_DIV_23 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 23 */ +#define LL_RCC_PLLM_DIV_24 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3) /*!< PLL, PLLI2S and PLLSAI division factor by 24 */ +#define LL_RCC_PLLM_DIV_25 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 25 */ +#define LL_RCC_PLLM_DIV_26 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 26 */ +#define LL_RCC_PLLM_DIV_27 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 27 */ +#define LL_RCC_PLLM_DIV_28 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 28 */ +#define LL_RCC_PLLM_DIV_29 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 29 */ +#define LL_RCC_PLLM_DIV_30 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 30 */ +#define LL_RCC_PLLM_DIV_31 (RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 31 */ +#define LL_RCC_PLLM_DIV_32 (RCC_PLLCFGR_PLLM_5) /*!< PLL, PLLI2S and PLLSAI division factor by 32 */ +#define LL_RCC_PLLM_DIV_33 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 33 */ +#define LL_RCC_PLLM_DIV_34 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 34 */ +#define LL_RCC_PLLM_DIV_35 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 35 */ +#define LL_RCC_PLLM_DIV_36 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 36 */ +#define LL_RCC_PLLM_DIV_37 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 37 */ +#define LL_RCC_PLLM_DIV_38 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 38 */ +#define LL_RCC_PLLM_DIV_39 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 39 */ +#define LL_RCC_PLLM_DIV_40 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3) /*!< PLL, PLLI2S and PLLSAI division factor by 40 */ +#define LL_RCC_PLLM_DIV_41 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 41 */ +#define LL_RCC_PLLM_DIV_42 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 42 */ +#define LL_RCC_PLLM_DIV_43 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 43 */ +#define LL_RCC_PLLM_DIV_44 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 44 */ +#define LL_RCC_PLLM_DIV_45 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 45 */ +#define LL_RCC_PLLM_DIV_46 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 46 */ +#define LL_RCC_PLLM_DIV_47 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 47 */ +#define LL_RCC_PLLM_DIV_48 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4) /*!< PLL, PLLI2S and PLLSAI division factor by 48 */ +#define LL_RCC_PLLM_DIV_49 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 49 */ +#define LL_RCC_PLLM_DIV_50 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 50 */ +#define LL_RCC_PLLM_DIV_51 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 51 */ +#define LL_RCC_PLLM_DIV_52 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 52 */ +#define LL_RCC_PLLM_DIV_53 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 53 */ +#define LL_RCC_PLLM_DIV_54 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 54 */ +#define LL_RCC_PLLM_DIV_55 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 55 */ +#define LL_RCC_PLLM_DIV_56 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3) /*!< PLL, PLLI2S and PLLSAI division factor by 56 */ +#define LL_RCC_PLLM_DIV_57 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 57 */ +#define LL_RCC_PLLM_DIV_58 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 58 */ +#define LL_RCC_PLLM_DIV_59 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 59 */ +#define LL_RCC_PLLM_DIV_60 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2) /*!< PLL, PLLI2S and PLLSAI division factor by 60 */ +#define LL_RCC_PLLM_DIV_61 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 61 */ +#define LL_RCC_PLLM_DIV_62 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< PLL, PLLI2S and PLLSAI division factor by 62 */ +#define LL_RCC_PLLM_DIV_63 (RCC_PLLCFGR_PLLM_5 | RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< PLL, PLLI2S and PLLSAI division factor by 63 */ +/** + * @} + */ + +#if defined(RCC_PLLCFGR_PLLR) +/** @defgroup RCC_LL_EC_PLLR_DIV PLL division factor (PLLR) + * @{ + */ +#define LL_RCC_PLLR_DIV_2 (RCC_PLLCFGR_PLLR_1) /*!< Main PLL division factor for PLLCLK (system clock) by 2 */ +#define LL_RCC_PLLR_DIV_3 (RCC_PLLCFGR_PLLR_1|RCC_PLLCFGR_PLLR_0) /*!< Main PLL division factor for PLLCLK (system clock) by 3 */ +#define LL_RCC_PLLR_DIV_4 (RCC_PLLCFGR_PLLR_2) /*!< Main PLL division factor for PLLCLK (system clock) by 4 */ +#define LL_RCC_PLLR_DIV_5 (RCC_PLLCFGR_PLLR_2|RCC_PLLCFGR_PLLR_0) /*!< Main PLL division factor for PLLCLK (system clock) by 5 */ +#define LL_RCC_PLLR_DIV_6 (RCC_PLLCFGR_PLLR_2|RCC_PLLCFGR_PLLR_1) /*!< Main PLL division factor for PLLCLK (system clock) by 6 */ +#define LL_RCC_PLLR_DIV_7 (RCC_PLLCFGR_PLLR) /*!< Main PLL division factor for PLLCLK (system clock) by 7 */ +/** + * @} + */ +#endif /* RCC_PLLCFGR_PLLR */ + +#if defined(RCC_DCKCFGR_PLLDIVR) +/** @defgroup RCC_LL_EC_PLLDIVR PLLDIVR division factor (PLLDIVR) + * @{ + */ +#define LL_RCC_PLLDIVR_DIV_1 (RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 1 */ +#define LL_RCC_PLLDIVR_DIV_2 (RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 2 */ +#define LL_RCC_PLLDIVR_DIV_3 (RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 3 */ +#define LL_RCC_PLLDIVR_DIV_4 (RCC_DCKCFGR_PLLDIVR_2) /*!< PLL division factor for PLLDIVR output by 4 */ +#define LL_RCC_PLLDIVR_DIV_5 (RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 5 */ +#define LL_RCC_PLLDIVR_DIV_6 (RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 6 */ +#define LL_RCC_PLLDIVR_DIV_7 (RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 7 */ +#define LL_RCC_PLLDIVR_DIV_8 (RCC_DCKCFGR_PLLDIVR_3) /*!< PLL division factor for PLLDIVR output by 8 */ +#define LL_RCC_PLLDIVR_DIV_9 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 9 */ +#define LL_RCC_PLLDIVR_DIV_10 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 10 */ +#define LL_RCC_PLLDIVR_DIV_11 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 11 */ +#define LL_RCC_PLLDIVR_DIV_12 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2) /*!< PLL division factor for PLLDIVR output by 12 */ +#define LL_RCC_PLLDIVR_DIV_13 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 13 */ +#define LL_RCC_PLLDIVR_DIV_14 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 14 */ +#define LL_RCC_PLLDIVR_DIV_15 (RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 15 */ +#define LL_RCC_PLLDIVR_DIV_16 (RCC_DCKCFGR_PLLDIVR_4) /*!< PLL division factor for PLLDIVR output by 16 */ +#define LL_RCC_PLLDIVR_DIV_17 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 17 */ +#define LL_RCC_PLLDIVR_DIV_18 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 18 */ +#define LL_RCC_PLLDIVR_DIV_19 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 19 */ +#define LL_RCC_PLLDIVR_DIV_20 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_2) /*!< PLL division factor for PLLDIVR output by 20 */ +#define LL_RCC_PLLDIVR_DIV_21 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 21 */ +#define LL_RCC_PLLDIVR_DIV_22 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 22 */ +#define LL_RCC_PLLDIVR_DIV_23 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 23 */ +#define LL_RCC_PLLDIVR_DIV_24 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3) /*!< PLL division factor for PLLDIVR output by 24 */ +#define LL_RCC_PLLDIVR_DIV_25 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 25 */ +#define LL_RCC_PLLDIVR_DIV_26 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 26 */ +#define LL_RCC_PLLDIVR_DIV_27 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 27 */ +#define LL_RCC_PLLDIVR_DIV_28 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2) /*!< PLL division factor for PLLDIVR output by 28 */ +#define LL_RCC_PLLDIVR_DIV_29 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 29 */ +#define LL_RCC_PLLDIVR_DIV_30 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1) /*!< PLL division factor for PLLDIVR output by 30 */ +#define LL_RCC_PLLDIVR_DIV_31 (RCC_DCKCFGR_PLLDIVR_4 | RCC_DCKCFGR_PLLDIVR_3 | RCC_DCKCFGR_PLLDIVR_2 | RCC_DCKCFGR_PLLDIVR_1 | RCC_DCKCFGR_PLLDIVR_0) /*!< PLL division factor for PLLDIVR output by 31 */ +/** + * @} + */ +#endif /* RCC_DCKCFGR_PLLDIVR */ + +/** @defgroup RCC_LL_EC_PLLP_DIV PLL division factor (PLLP) + * @{ + */ +#define LL_RCC_PLLP_DIV_2 0x00000000U /*!< Main PLL division factor for PLLP output by 2 */ +#define LL_RCC_PLLP_DIV_4 RCC_PLLCFGR_PLLP_0 /*!< Main PLL division factor for PLLP output by 4 */ +#define LL_RCC_PLLP_DIV_6 RCC_PLLCFGR_PLLP_1 /*!< Main PLL division factor for PLLP output by 6 */ +#define LL_RCC_PLLP_DIV_8 (RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLP_0) /*!< Main PLL division factor for PLLP output by 8 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLLQ_DIV PLL division factor (PLLQ) + * @{ + */ +#define LL_RCC_PLLQ_DIV_2 RCC_PLLCFGR_PLLQ_1 /*!< Main PLL division factor for PLLQ output by 2 */ +#define LL_RCC_PLLQ_DIV_3 (RCC_PLLCFGR_PLLQ_1|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 3 */ +#define LL_RCC_PLLQ_DIV_4 RCC_PLLCFGR_PLLQ_2 /*!< Main PLL division factor for PLLQ output by 4 */ +#define LL_RCC_PLLQ_DIV_5 (RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 5 */ +#define LL_RCC_PLLQ_DIV_6 (RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_1) /*!< Main PLL division factor for PLLQ output by 6 */ +#define LL_RCC_PLLQ_DIV_7 (RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_1|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 7 */ +#define LL_RCC_PLLQ_DIV_8 RCC_PLLCFGR_PLLQ_3 /*!< Main PLL division factor for PLLQ output by 8 */ +#define LL_RCC_PLLQ_DIV_9 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 9 */ +#define LL_RCC_PLLQ_DIV_10 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_1) /*!< Main PLL division factor for PLLQ output by 10 */ +#define LL_RCC_PLLQ_DIV_11 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_1|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 11 */ +#define LL_RCC_PLLQ_DIV_12 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_2) /*!< Main PLL division factor for PLLQ output by 12 */ +#define LL_RCC_PLLQ_DIV_13 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 13 */ +#define LL_RCC_PLLQ_DIV_14 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_1) /*!< Main PLL division factor for PLLQ output by 14 */ +#define LL_RCC_PLLQ_DIV_15 (RCC_PLLCFGR_PLLQ_3|RCC_PLLCFGR_PLLQ_2|RCC_PLLCFGR_PLLQ_1|RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 15 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLL_SPRE_SEL PLL Spread Spectrum Selection + * @{ + */ +#define LL_RCC_SPREAD_SELECT_CENTER 0x00000000U /*!< PLL center spread spectrum selection */ +#define LL_RCC_SPREAD_SELECT_DOWN RCC_SSCGR_SPREADSEL /*!< PLL down spread spectrum selection */ +/** + * @} + */ + +#if defined(RCC_PLLI2S_SUPPORT) +/** @defgroup RCC_LL_EC_PLLI2SM PLLI2SM division factor (PLLI2SM) + * @{ + */ +#if defined(RCC_PLLI2SCFGR_PLLI2SM) +#define LL_RCC_PLLI2SM_DIV_2 (RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 2 */ +#define LL_RCC_PLLI2SM_DIV_3 (RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 3 */ +#define LL_RCC_PLLI2SM_DIV_4 (RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 4 */ +#define LL_RCC_PLLI2SM_DIV_5 (RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 5 */ +#define LL_RCC_PLLI2SM_DIV_6 (RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 6 */ +#define LL_RCC_PLLI2SM_DIV_7 (RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 7 */ +#define LL_RCC_PLLI2SM_DIV_8 (RCC_PLLI2SCFGR_PLLI2SM_3) /*!< PLLI2S division factor for PLLI2SM output by 8 */ +#define LL_RCC_PLLI2SM_DIV_9 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 9 */ +#define LL_RCC_PLLI2SM_DIV_10 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 10 */ +#define LL_RCC_PLLI2SM_DIV_11 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 11 */ +#define LL_RCC_PLLI2SM_DIV_12 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 12 */ +#define LL_RCC_PLLI2SM_DIV_13 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 13 */ +#define LL_RCC_PLLI2SM_DIV_14 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 14 */ +#define LL_RCC_PLLI2SM_DIV_15 (RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 15 */ +#define LL_RCC_PLLI2SM_DIV_16 (RCC_PLLI2SCFGR_PLLI2SM_4) /*!< PLLI2S division factor for PLLI2SM output by 16 */ +#define LL_RCC_PLLI2SM_DIV_17 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 17 */ +#define LL_RCC_PLLI2SM_DIV_18 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 18 */ +#define LL_RCC_PLLI2SM_DIV_19 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 19 */ +#define LL_RCC_PLLI2SM_DIV_20 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 20 */ +#define LL_RCC_PLLI2SM_DIV_21 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 21 */ +#define LL_RCC_PLLI2SM_DIV_22 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 22 */ +#define LL_RCC_PLLI2SM_DIV_23 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 23 */ +#define LL_RCC_PLLI2SM_DIV_24 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3) /*!< PLLI2S division factor for PLLI2SM output by 24 */ +#define LL_RCC_PLLI2SM_DIV_25 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 25 */ +#define LL_RCC_PLLI2SM_DIV_26 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 26 */ +#define LL_RCC_PLLI2SM_DIV_27 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 27 */ +#define LL_RCC_PLLI2SM_DIV_28 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 28 */ +#define LL_RCC_PLLI2SM_DIV_29 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 29 */ +#define LL_RCC_PLLI2SM_DIV_30 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 30 */ +#define LL_RCC_PLLI2SM_DIV_31 (RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 31 */ +#define LL_RCC_PLLI2SM_DIV_32 (RCC_PLLI2SCFGR_PLLI2SM_5) /*!< PLLI2S division factor for PLLI2SM output by 32 */ +#define LL_RCC_PLLI2SM_DIV_33 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 33 */ +#define LL_RCC_PLLI2SM_DIV_34 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 34 */ +#define LL_RCC_PLLI2SM_DIV_35 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 35 */ +#define LL_RCC_PLLI2SM_DIV_36 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 36 */ +#define LL_RCC_PLLI2SM_DIV_37 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 37 */ +#define LL_RCC_PLLI2SM_DIV_38 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 38 */ +#define LL_RCC_PLLI2SM_DIV_39 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 39 */ +#define LL_RCC_PLLI2SM_DIV_40 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3) /*!< PLLI2S division factor for PLLI2SM output by 40 */ +#define LL_RCC_PLLI2SM_DIV_41 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 41 */ +#define LL_RCC_PLLI2SM_DIV_42 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 42 */ +#define LL_RCC_PLLI2SM_DIV_43 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 43 */ +#define LL_RCC_PLLI2SM_DIV_44 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 44 */ +#define LL_RCC_PLLI2SM_DIV_45 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 45 */ +#define LL_RCC_PLLI2SM_DIV_46 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 46 */ +#define LL_RCC_PLLI2SM_DIV_47 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 47 */ +#define LL_RCC_PLLI2SM_DIV_48 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4) /*!< PLLI2S division factor for PLLI2SM output by 48 */ +#define LL_RCC_PLLI2SM_DIV_49 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 49 */ +#define LL_RCC_PLLI2SM_DIV_50 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 50 */ +#define LL_RCC_PLLI2SM_DIV_51 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 51 */ +#define LL_RCC_PLLI2SM_DIV_52 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 52 */ +#define LL_RCC_PLLI2SM_DIV_53 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 53 */ +#define LL_RCC_PLLI2SM_DIV_54 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 54 */ +#define LL_RCC_PLLI2SM_DIV_55 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 55 */ +#define LL_RCC_PLLI2SM_DIV_56 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3) /*!< PLLI2S division factor for PLLI2SM output by 56 */ +#define LL_RCC_PLLI2SM_DIV_57 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 57 */ +#define LL_RCC_PLLI2SM_DIV_58 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 58 */ +#define LL_RCC_PLLI2SM_DIV_59 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 59 */ +#define LL_RCC_PLLI2SM_DIV_60 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2) /*!< PLLI2S division factor for PLLI2SM output by 60 */ +#define LL_RCC_PLLI2SM_DIV_61 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 61 */ +#define LL_RCC_PLLI2SM_DIV_62 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1) /*!< PLLI2S division factor for PLLI2SM output by 62 */ +#define LL_RCC_PLLI2SM_DIV_63 (RCC_PLLI2SCFGR_PLLI2SM_5 | RCC_PLLI2SCFGR_PLLI2SM_4 | RCC_PLLI2SCFGR_PLLI2SM_3 | RCC_PLLI2SCFGR_PLLI2SM_2 | RCC_PLLI2SCFGR_PLLI2SM_1 | RCC_PLLI2SCFGR_PLLI2SM_0) /*!< PLLI2S division factor for PLLI2SM output by 63 */ +#else +#define LL_RCC_PLLI2SM_DIV_2 LL_RCC_PLLM_DIV_2 /*!< PLLI2S division factor for PLLI2SM output by 2 */ +#define LL_RCC_PLLI2SM_DIV_3 LL_RCC_PLLM_DIV_3 /*!< PLLI2S division factor for PLLI2SM output by 3 */ +#define LL_RCC_PLLI2SM_DIV_4 LL_RCC_PLLM_DIV_4 /*!< PLLI2S division factor for PLLI2SM output by 4 */ +#define LL_RCC_PLLI2SM_DIV_5 LL_RCC_PLLM_DIV_5 /*!< PLLI2S division factor for PLLI2SM output by 5 */ +#define LL_RCC_PLLI2SM_DIV_6 LL_RCC_PLLM_DIV_6 /*!< PLLI2S division factor for PLLI2SM output by 6 */ +#define LL_RCC_PLLI2SM_DIV_7 LL_RCC_PLLM_DIV_7 /*!< PLLI2S division factor for PLLI2SM output by 7 */ +#define LL_RCC_PLLI2SM_DIV_8 LL_RCC_PLLM_DIV_8 /*!< PLLI2S division factor for PLLI2SM output by 8 */ +#define LL_RCC_PLLI2SM_DIV_9 LL_RCC_PLLM_DIV_9 /*!< PLLI2S division factor for PLLI2SM output by 9 */ +#define LL_RCC_PLLI2SM_DIV_10 LL_RCC_PLLM_DIV_10 /*!< PLLI2S division factor for PLLI2SM output by 10 */ +#define LL_RCC_PLLI2SM_DIV_11 LL_RCC_PLLM_DIV_11 /*!< PLLI2S division factor for PLLI2SM output by 11 */ +#define LL_RCC_PLLI2SM_DIV_12 LL_RCC_PLLM_DIV_12 /*!< PLLI2S division factor for PLLI2SM output by 12 */ +#define LL_RCC_PLLI2SM_DIV_13 LL_RCC_PLLM_DIV_13 /*!< PLLI2S division factor for PLLI2SM output by 13 */ +#define LL_RCC_PLLI2SM_DIV_14 LL_RCC_PLLM_DIV_14 /*!< PLLI2S division factor for PLLI2SM output by 14 */ +#define LL_RCC_PLLI2SM_DIV_15 LL_RCC_PLLM_DIV_15 /*!< PLLI2S division factor for PLLI2SM output by 15 */ +#define LL_RCC_PLLI2SM_DIV_16 LL_RCC_PLLM_DIV_16 /*!< PLLI2S division factor for PLLI2SM output by 16 */ +#define LL_RCC_PLLI2SM_DIV_17 LL_RCC_PLLM_DIV_17 /*!< PLLI2S division factor for PLLI2SM output by 17 */ +#define LL_RCC_PLLI2SM_DIV_18 LL_RCC_PLLM_DIV_18 /*!< PLLI2S division factor for PLLI2SM output by 18 */ +#define LL_RCC_PLLI2SM_DIV_19 LL_RCC_PLLM_DIV_19 /*!< PLLI2S division factor for PLLI2SM output by 19 */ +#define LL_RCC_PLLI2SM_DIV_20 LL_RCC_PLLM_DIV_20 /*!< PLLI2S division factor for PLLI2SM output by 20 */ +#define LL_RCC_PLLI2SM_DIV_21 LL_RCC_PLLM_DIV_21 /*!< PLLI2S division factor for PLLI2SM output by 21 */ +#define LL_RCC_PLLI2SM_DIV_22 LL_RCC_PLLM_DIV_22 /*!< PLLI2S division factor for PLLI2SM output by 22 */ +#define LL_RCC_PLLI2SM_DIV_23 LL_RCC_PLLM_DIV_23 /*!< PLLI2S division factor for PLLI2SM output by 23 */ +#define LL_RCC_PLLI2SM_DIV_24 LL_RCC_PLLM_DIV_24 /*!< PLLI2S division factor for PLLI2SM output by 24 */ +#define LL_RCC_PLLI2SM_DIV_25 LL_RCC_PLLM_DIV_25 /*!< PLLI2S division factor for PLLI2SM output by 25 */ +#define LL_RCC_PLLI2SM_DIV_26 LL_RCC_PLLM_DIV_26 /*!< PLLI2S division factor for PLLI2SM output by 26 */ +#define LL_RCC_PLLI2SM_DIV_27 LL_RCC_PLLM_DIV_27 /*!< PLLI2S division factor for PLLI2SM output by 27 */ +#define LL_RCC_PLLI2SM_DIV_28 LL_RCC_PLLM_DIV_28 /*!< PLLI2S division factor for PLLI2SM output by 28 */ +#define LL_RCC_PLLI2SM_DIV_29 LL_RCC_PLLM_DIV_29 /*!< PLLI2S division factor for PLLI2SM output by 29 */ +#define LL_RCC_PLLI2SM_DIV_30 LL_RCC_PLLM_DIV_30 /*!< PLLI2S division factor for PLLI2SM output by 30 */ +#define LL_RCC_PLLI2SM_DIV_31 LL_RCC_PLLM_DIV_31 /*!< PLLI2S division factor for PLLI2SM output by 31 */ +#define LL_RCC_PLLI2SM_DIV_32 LL_RCC_PLLM_DIV_32 /*!< PLLI2S division factor for PLLI2SM output by 32 */ +#define LL_RCC_PLLI2SM_DIV_33 LL_RCC_PLLM_DIV_33 /*!< PLLI2S division factor for PLLI2SM output by 33 */ +#define LL_RCC_PLLI2SM_DIV_34 LL_RCC_PLLM_DIV_34 /*!< PLLI2S division factor for PLLI2SM output by 34 */ +#define LL_RCC_PLLI2SM_DIV_35 LL_RCC_PLLM_DIV_35 /*!< PLLI2S division factor for PLLI2SM output by 35 */ +#define LL_RCC_PLLI2SM_DIV_36 LL_RCC_PLLM_DIV_36 /*!< PLLI2S division factor for PLLI2SM output by 36 */ +#define LL_RCC_PLLI2SM_DIV_37 LL_RCC_PLLM_DIV_37 /*!< PLLI2S division factor for PLLI2SM output by 37 */ +#define LL_RCC_PLLI2SM_DIV_38 LL_RCC_PLLM_DIV_38 /*!< PLLI2S division factor for PLLI2SM output by 38 */ +#define LL_RCC_PLLI2SM_DIV_39 LL_RCC_PLLM_DIV_39 /*!< PLLI2S division factor for PLLI2SM output by 39 */ +#define LL_RCC_PLLI2SM_DIV_40 LL_RCC_PLLM_DIV_40 /*!< PLLI2S division factor for PLLI2SM output by 40 */ +#define LL_RCC_PLLI2SM_DIV_41 LL_RCC_PLLM_DIV_41 /*!< PLLI2S division factor for PLLI2SM output by 41 */ +#define LL_RCC_PLLI2SM_DIV_42 LL_RCC_PLLM_DIV_42 /*!< PLLI2S division factor for PLLI2SM output by 42 */ +#define LL_RCC_PLLI2SM_DIV_43 LL_RCC_PLLM_DIV_43 /*!< PLLI2S division factor for PLLI2SM output by 43 */ +#define LL_RCC_PLLI2SM_DIV_44 LL_RCC_PLLM_DIV_44 /*!< PLLI2S division factor for PLLI2SM output by 44 */ +#define LL_RCC_PLLI2SM_DIV_45 LL_RCC_PLLM_DIV_45 /*!< PLLI2S division factor for PLLI2SM output by 45 */ +#define LL_RCC_PLLI2SM_DIV_46 LL_RCC_PLLM_DIV_46 /*!< PLLI2S division factor for PLLI2SM output by 46 */ +#define LL_RCC_PLLI2SM_DIV_47 LL_RCC_PLLM_DIV_47 /*!< PLLI2S division factor for PLLI2SM output by 47 */ +#define LL_RCC_PLLI2SM_DIV_48 LL_RCC_PLLM_DIV_48 /*!< PLLI2S division factor for PLLI2SM output by 48 */ +#define LL_RCC_PLLI2SM_DIV_49 LL_RCC_PLLM_DIV_49 /*!< PLLI2S division factor for PLLI2SM output by 49 */ +#define LL_RCC_PLLI2SM_DIV_50 LL_RCC_PLLM_DIV_50 /*!< PLLI2S division factor for PLLI2SM output by 50 */ +#define LL_RCC_PLLI2SM_DIV_51 LL_RCC_PLLM_DIV_51 /*!< PLLI2S division factor for PLLI2SM output by 51 */ +#define LL_RCC_PLLI2SM_DIV_52 LL_RCC_PLLM_DIV_52 /*!< PLLI2S division factor for PLLI2SM output by 52 */ +#define LL_RCC_PLLI2SM_DIV_53 LL_RCC_PLLM_DIV_53 /*!< PLLI2S division factor for PLLI2SM output by 53 */ +#define LL_RCC_PLLI2SM_DIV_54 LL_RCC_PLLM_DIV_54 /*!< PLLI2S division factor for PLLI2SM output by 54 */ +#define LL_RCC_PLLI2SM_DIV_55 LL_RCC_PLLM_DIV_55 /*!< PLLI2S division factor for PLLI2SM output by 55 */ +#define LL_RCC_PLLI2SM_DIV_56 LL_RCC_PLLM_DIV_56 /*!< PLLI2S division factor for PLLI2SM output by 56 */ +#define LL_RCC_PLLI2SM_DIV_57 LL_RCC_PLLM_DIV_57 /*!< PLLI2S division factor for PLLI2SM output by 57 */ +#define LL_RCC_PLLI2SM_DIV_58 LL_RCC_PLLM_DIV_58 /*!< PLLI2S division factor for PLLI2SM output by 58 */ +#define LL_RCC_PLLI2SM_DIV_59 LL_RCC_PLLM_DIV_59 /*!< PLLI2S division factor for PLLI2SM output by 59 */ +#define LL_RCC_PLLI2SM_DIV_60 LL_RCC_PLLM_DIV_60 /*!< PLLI2S division factor for PLLI2SM output by 60 */ +#define LL_RCC_PLLI2SM_DIV_61 LL_RCC_PLLM_DIV_61 /*!< PLLI2S division factor for PLLI2SM output by 61 */ +#define LL_RCC_PLLI2SM_DIV_62 LL_RCC_PLLM_DIV_62 /*!< PLLI2S division factor for PLLI2SM output by 62 */ +#define LL_RCC_PLLI2SM_DIV_63 LL_RCC_PLLM_DIV_63 /*!< PLLI2S division factor for PLLI2SM output by 63 */ +#endif /* RCC_PLLI2SCFGR_PLLI2SM */ +/** + * @} + */ + +#if defined(RCC_PLLI2SCFGR_PLLI2SQ) +/** @defgroup RCC_LL_EC_PLLI2SQ PLLI2SQ division factor (PLLI2SQ) + * @{ + */ +#define LL_RCC_PLLI2SQ_DIV_2 RCC_PLLI2SCFGR_PLLI2SQ_1 /*!< PLLI2S division factor for PLLI2SQ output by 2 */ +#define LL_RCC_PLLI2SQ_DIV_3 (RCC_PLLI2SCFGR_PLLI2SQ_1 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 3 */ +#define LL_RCC_PLLI2SQ_DIV_4 RCC_PLLI2SCFGR_PLLI2SQ_2 /*!< PLLI2S division factor for PLLI2SQ output by 4 */ +#define LL_RCC_PLLI2SQ_DIV_5 (RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 5 */ +#define LL_RCC_PLLI2SQ_DIV_6 (RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_1) /*!< PLLI2S division factor for PLLI2SQ output by 6 */ +#define LL_RCC_PLLI2SQ_DIV_7 (RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_1 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 7 */ +#define LL_RCC_PLLI2SQ_DIV_8 RCC_PLLI2SCFGR_PLLI2SQ_3 /*!< PLLI2S division factor for PLLI2SQ output by 8 */ +#define LL_RCC_PLLI2SQ_DIV_9 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 9 */ +#define LL_RCC_PLLI2SQ_DIV_10 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_1) /*!< PLLI2S division factor for PLLI2SQ output by 10 */ +#define LL_RCC_PLLI2SQ_DIV_11 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_1 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 11 */ +#define LL_RCC_PLLI2SQ_DIV_12 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_2) /*!< PLLI2S division factor for PLLI2SQ output by 12 */ +#define LL_RCC_PLLI2SQ_DIV_13 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 13 */ +#define LL_RCC_PLLI2SQ_DIV_14 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_1) /*!< PLLI2S division factor for PLLI2SQ output by 14 */ +#define LL_RCC_PLLI2SQ_DIV_15 (RCC_PLLI2SCFGR_PLLI2SQ_3 | RCC_PLLI2SCFGR_PLLI2SQ_2 | RCC_PLLI2SCFGR_PLLI2SQ_1 | RCC_PLLI2SCFGR_PLLI2SQ_0) /*!< PLLI2S division factor for PLLI2SQ output by 15 */ +/** + * @} + */ +#endif /* RCC_PLLI2SCFGR_PLLI2SQ */ + +#if defined(RCC_DCKCFGR_PLLI2SDIVQ) +/** @defgroup RCC_LL_EC_PLLI2SDIVQ PLLI2SDIVQ division factor (PLLI2SDIVQ) + * @{ + */ +#define LL_RCC_PLLI2SDIVQ_DIV_1 0x00000000U /*!< PLLI2S division factor for PLLI2SDIVQ output by 1 */ +#define LL_RCC_PLLI2SDIVQ_DIV_2 RCC_DCKCFGR_PLLI2SDIVQ_0 /*!< PLLI2S division factor for PLLI2SDIVQ output by 2 */ +#define LL_RCC_PLLI2SDIVQ_DIV_3 RCC_DCKCFGR_PLLI2SDIVQ_1 /*!< PLLI2S division factor for PLLI2SDIVQ output by 3 */ +#define LL_RCC_PLLI2SDIVQ_DIV_4 (RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 4 */ +#define LL_RCC_PLLI2SDIVQ_DIV_5 RCC_DCKCFGR_PLLI2SDIVQ_2 /*!< PLLI2S division factor for PLLI2SDIVQ output by 5 */ +#define LL_RCC_PLLI2SDIVQ_DIV_6 (RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 6 */ +#define LL_RCC_PLLI2SDIVQ_DIV_7 (RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 7 */ +#define LL_RCC_PLLI2SDIVQ_DIV_8 (RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 8 */ +#define LL_RCC_PLLI2SDIVQ_DIV_9 RCC_DCKCFGR_PLLI2SDIVQ_3 /*!< PLLI2S division factor for PLLI2SDIVQ output by 9 */ +#define LL_RCC_PLLI2SDIVQ_DIV_10 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 10 */ +#define LL_RCC_PLLI2SDIVQ_DIV_11 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 11 */ +#define LL_RCC_PLLI2SDIVQ_DIV_12 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 12 */ +#define LL_RCC_PLLI2SDIVQ_DIV_13 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2) /*!< PLLI2S division factor for PLLI2SDIVQ output by 13 */ +#define LL_RCC_PLLI2SDIVQ_DIV_14 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 14 */ +#define LL_RCC_PLLI2SDIVQ_DIV_15 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 15 */ +#define LL_RCC_PLLI2SDIVQ_DIV_16 (RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 16 */ +#define LL_RCC_PLLI2SDIVQ_DIV_17 RCC_DCKCFGR_PLLI2SDIVQ_4 /*!< PLLI2S division factor for PLLI2SDIVQ output by 17 */ +#define LL_RCC_PLLI2SDIVQ_DIV_18 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 18 */ +#define LL_RCC_PLLI2SDIVQ_DIV_19 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 19 */ +#define LL_RCC_PLLI2SDIVQ_DIV_20 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 20 */ +#define LL_RCC_PLLI2SDIVQ_DIV_21 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_2) /*!< PLLI2S division factor for PLLI2SDIVQ output by 21 */ +#define LL_RCC_PLLI2SDIVQ_DIV_22 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 22 */ +#define LL_RCC_PLLI2SDIVQ_DIV_23 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 23 */ +#define LL_RCC_PLLI2SDIVQ_DIV_24 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 24 */ +#define LL_RCC_PLLI2SDIVQ_DIV_25 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3) /*!< PLLI2S division factor for PLLI2SDIVQ output by 25 */ +#define LL_RCC_PLLI2SDIVQ_DIV_26 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 26 */ +#define LL_RCC_PLLI2SDIVQ_DIV_27 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 27 */ +#define LL_RCC_PLLI2SDIVQ_DIV_28 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 28 */ +#define LL_RCC_PLLI2SDIVQ_DIV_29 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2) /*!< PLLI2S division factor for PLLI2SDIVQ output by 29 */ +#define LL_RCC_PLLI2SDIVQ_DIV_30 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 30 */ +#define LL_RCC_PLLI2SDIVQ_DIV_31 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1) /*!< PLLI2S division factor for PLLI2SDIVQ output by 31 */ +#define LL_RCC_PLLI2SDIVQ_DIV_32 (RCC_DCKCFGR_PLLI2SDIVQ_4 | RCC_DCKCFGR_PLLI2SDIVQ_3 | RCC_DCKCFGR_PLLI2SDIVQ_2 | RCC_DCKCFGR_PLLI2SDIVQ_1 | RCC_DCKCFGR_PLLI2SDIVQ_0) /*!< PLLI2S division factor for PLLI2SDIVQ output by 32 */ +/** + * @} + */ +#endif /* RCC_DCKCFGR_PLLI2SDIVQ */ + +#if defined(RCC_DCKCFGR_PLLI2SDIVR) +/** @defgroup RCC_LL_EC_PLLI2SDIVR PLLI2SDIVR division factor (PLLI2SDIVR) + * @{ + */ +#define LL_RCC_PLLI2SDIVR_DIV_1 (RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 1 */ +#define LL_RCC_PLLI2SDIVR_DIV_2 (RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 2 */ +#define LL_RCC_PLLI2SDIVR_DIV_3 (RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 3 */ +#define LL_RCC_PLLI2SDIVR_DIV_4 (RCC_DCKCFGR_PLLI2SDIVR_2) /*!< PLLI2S division factor for PLLI2SDIVR output by 4 */ +#define LL_RCC_PLLI2SDIVR_DIV_5 (RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 5 */ +#define LL_RCC_PLLI2SDIVR_DIV_6 (RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 6 */ +#define LL_RCC_PLLI2SDIVR_DIV_7 (RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 7 */ +#define LL_RCC_PLLI2SDIVR_DIV_8 (RCC_DCKCFGR_PLLI2SDIVR_3) /*!< PLLI2S division factor for PLLI2SDIVR output by 8 */ +#define LL_RCC_PLLI2SDIVR_DIV_9 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 9 */ +#define LL_RCC_PLLI2SDIVR_DIV_10 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 10 */ +#define LL_RCC_PLLI2SDIVR_DIV_11 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 11 */ +#define LL_RCC_PLLI2SDIVR_DIV_12 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2) /*!< PLLI2S division factor for PLLI2SDIVR output by 12 */ +#define LL_RCC_PLLI2SDIVR_DIV_13 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 13 */ +#define LL_RCC_PLLI2SDIVR_DIV_14 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 14 */ +#define LL_RCC_PLLI2SDIVR_DIV_15 (RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 15 */ +#define LL_RCC_PLLI2SDIVR_DIV_16 (RCC_DCKCFGR_PLLI2SDIVR_4) /*!< PLLI2S division factor for PLLI2SDIVR output by 16 */ +#define LL_RCC_PLLI2SDIVR_DIV_17 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 17 */ +#define LL_RCC_PLLI2SDIVR_DIV_18 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 18 */ +#define LL_RCC_PLLI2SDIVR_DIV_19 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 19 */ +#define LL_RCC_PLLI2SDIVR_DIV_20 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_2) /*!< PLLI2S division factor for PLLI2SDIVR output by 20 */ +#define LL_RCC_PLLI2SDIVR_DIV_21 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 21 */ +#define LL_RCC_PLLI2SDIVR_DIV_22 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 22 */ +#define LL_RCC_PLLI2SDIVR_DIV_23 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 23 */ +#define LL_RCC_PLLI2SDIVR_DIV_24 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3) /*!< PLLI2S division factor for PLLI2SDIVR output by 24 */ +#define LL_RCC_PLLI2SDIVR_DIV_25 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 25 */ +#define LL_RCC_PLLI2SDIVR_DIV_26 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 26 */ +#define LL_RCC_PLLI2SDIVR_DIV_27 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 27 */ +#define LL_RCC_PLLI2SDIVR_DIV_28 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2) /*!< PLLI2S division factor for PLLI2SDIVR output by 28 */ +#define LL_RCC_PLLI2SDIVR_DIV_29 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 29 */ +#define LL_RCC_PLLI2SDIVR_DIV_30 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1) /*!< PLLI2S division factor for PLLI2SDIVR output by 30 */ +#define LL_RCC_PLLI2SDIVR_DIV_31 (RCC_DCKCFGR_PLLI2SDIVR_4 | RCC_DCKCFGR_PLLI2SDIVR_3 | RCC_DCKCFGR_PLLI2SDIVR_2 | RCC_DCKCFGR_PLLI2SDIVR_1 | RCC_DCKCFGR_PLLI2SDIVR_0) /*!< PLLI2S division factor for PLLI2SDIVR output by 31 */ +/** + * @} + */ +#endif /* RCC_DCKCFGR_PLLI2SDIVR */ + +/** @defgroup RCC_LL_EC_PLLI2SR PLLI2SR division factor (PLLI2SR) + * @{ + */ +#define LL_RCC_PLLI2SR_DIV_2 RCC_PLLI2SCFGR_PLLI2SR_1 /*!< PLLI2S division factor for PLLI2SR output by 2 */ +#define LL_RCC_PLLI2SR_DIV_3 (RCC_PLLI2SCFGR_PLLI2SR_1 | RCC_PLLI2SCFGR_PLLI2SR_0) /*!< PLLI2S division factor for PLLI2SR output by 3 */ +#define LL_RCC_PLLI2SR_DIV_4 RCC_PLLI2SCFGR_PLLI2SR_2 /*!< PLLI2S division factor for PLLI2SR output by 4 */ +#define LL_RCC_PLLI2SR_DIV_5 (RCC_PLLI2SCFGR_PLLI2SR_2 | RCC_PLLI2SCFGR_PLLI2SR_0) /*!< PLLI2S division factor for PLLI2SR output by 5 */ +#define LL_RCC_PLLI2SR_DIV_6 (RCC_PLLI2SCFGR_PLLI2SR_2 | RCC_PLLI2SCFGR_PLLI2SR_1) /*!< PLLI2S division factor for PLLI2SR output by 6 */ +#define LL_RCC_PLLI2SR_DIV_7 (RCC_PLLI2SCFGR_PLLI2SR_2 | RCC_PLLI2SCFGR_PLLI2SR_1 | RCC_PLLI2SCFGR_PLLI2SR_0) /*!< PLLI2S division factor for PLLI2SR output by 7 */ +/** + * @} + */ + +#if defined(RCC_PLLI2SCFGR_PLLI2SP) +/** @defgroup RCC_LL_EC_PLLI2SP PLLI2SP division factor (PLLI2SP) + * @{ + */ +#define LL_RCC_PLLI2SP_DIV_2 0x00000000U /*!< PLLI2S division factor for PLLI2SP output by 2 */ +#define LL_RCC_PLLI2SP_DIV_4 RCC_PLLI2SCFGR_PLLI2SP_0 /*!< PLLI2S division factor for PLLI2SP output by 4 */ +#define LL_RCC_PLLI2SP_DIV_6 RCC_PLLI2SCFGR_PLLI2SP_1 /*!< PLLI2S division factor for PLLI2SP output by 6 */ +#define LL_RCC_PLLI2SP_DIV_8 (RCC_PLLI2SCFGR_PLLI2SP_1 | RCC_PLLI2SCFGR_PLLI2SP_0) /*!< PLLI2S division factor for PLLI2SP output by 8 */ +/** + * @} + */ +#endif /* RCC_PLLI2SCFGR_PLLI2SP */ +#endif /* RCC_PLLI2S_SUPPORT */ + +#if defined(RCC_PLLSAI_SUPPORT) +/** @defgroup RCC_LL_EC_PLLSAIM PLLSAIM division factor (PLLSAIM or PLLM) + * @{ + */ +#if defined(RCC_PLLSAICFGR_PLLSAIM) +#define LL_RCC_PLLSAIM_DIV_2 (RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 2 */ +#define LL_RCC_PLLSAIM_DIV_3 (RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 3 */ +#define LL_RCC_PLLSAIM_DIV_4 (RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 4 */ +#define LL_RCC_PLLSAIM_DIV_5 (RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 5 */ +#define LL_RCC_PLLSAIM_DIV_6 (RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 6 */ +#define LL_RCC_PLLSAIM_DIV_7 (RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 7 */ +#define LL_RCC_PLLSAIM_DIV_8 (RCC_PLLSAICFGR_PLLSAIM_3) /*!< PLLSAI division factor for PLLSAIM output by 8 */ +#define LL_RCC_PLLSAIM_DIV_9 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 9 */ +#define LL_RCC_PLLSAIM_DIV_10 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 10 */ +#define LL_RCC_PLLSAIM_DIV_11 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 11 */ +#define LL_RCC_PLLSAIM_DIV_12 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 12 */ +#define LL_RCC_PLLSAIM_DIV_13 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 13 */ +#define LL_RCC_PLLSAIM_DIV_14 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 14 */ +#define LL_RCC_PLLSAIM_DIV_15 (RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 15 */ +#define LL_RCC_PLLSAIM_DIV_16 (RCC_PLLSAICFGR_PLLSAIM_4) /*!< PLLSAI division factor for PLLSAIM output by 16 */ +#define LL_RCC_PLLSAIM_DIV_17 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 17 */ +#define LL_RCC_PLLSAIM_DIV_18 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 18 */ +#define LL_RCC_PLLSAIM_DIV_19 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 19 */ +#define LL_RCC_PLLSAIM_DIV_20 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 20 */ +#define LL_RCC_PLLSAIM_DIV_21 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 21 */ +#define LL_RCC_PLLSAIM_DIV_22 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 22 */ +#define LL_RCC_PLLSAIM_DIV_23 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 23 */ +#define LL_RCC_PLLSAIM_DIV_24 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3) /*!< PLLSAI division factor for PLLSAIM output by 24 */ +#define LL_RCC_PLLSAIM_DIV_25 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 25 */ +#define LL_RCC_PLLSAIM_DIV_26 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 26 */ +#define LL_RCC_PLLSAIM_DIV_27 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 27 */ +#define LL_RCC_PLLSAIM_DIV_28 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 28 */ +#define LL_RCC_PLLSAIM_DIV_29 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 29 */ +#define LL_RCC_PLLSAIM_DIV_30 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 30 */ +#define LL_RCC_PLLSAIM_DIV_31 (RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 31 */ +#define LL_RCC_PLLSAIM_DIV_32 (RCC_PLLSAICFGR_PLLSAIM_5) /*!< PLLSAI division factor for PLLSAIM output by 32 */ +#define LL_RCC_PLLSAIM_DIV_33 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 33 */ +#define LL_RCC_PLLSAIM_DIV_34 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 34 */ +#define LL_RCC_PLLSAIM_DIV_35 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 35 */ +#define LL_RCC_PLLSAIM_DIV_36 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 36 */ +#define LL_RCC_PLLSAIM_DIV_37 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 37 */ +#define LL_RCC_PLLSAIM_DIV_38 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 38 */ +#define LL_RCC_PLLSAIM_DIV_39 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 39 */ +#define LL_RCC_PLLSAIM_DIV_40 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3) /*!< PLLSAI division factor for PLLSAIM output by 40 */ +#define LL_RCC_PLLSAIM_DIV_41 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 41 */ +#define LL_RCC_PLLSAIM_DIV_42 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 42 */ +#define LL_RCC_PLLSAIM_DIV_43 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 43 */ +#define LL_RCC_PLLSAIM_DIV_44 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 44 */ +#define LL_RCC_PLLSAIM_DIV_45 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 45 */ +#define LL_RCC_PLLSAIM_DIV_46 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 46 */ +#define LL_RCC_PLLSAIM_DIV_47 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 47 */ +#define LL_RCC_PLLSAIM_DIV_48 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4) /*!< PLLSAI division factor for PLLSAIM output by 48 */ +#define LL_RCC_PLLSAIM_DIV_49 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 49 */ +#define LL_RCC_PLLSAIM_DIV_50 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 50 */ +#define LL_RCC_PLLSAIM_DIV_51 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 51 */ +#define LL_RCC_PLLSAIM_DIV_52 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 52 */ +#define LL_RCC_PLLSAIM_DIV_53 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 53 */ +#define LL_RCC_PLLSAIM_DIV_54 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 54 */ +#define LL_RCC_PLLSAIM_DIV_55 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 55 */ +#define LL_RCC_PLLSAIM_DIV_56 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3) /*!< PLLSAI division factor for PLLSAIM output by 56 */ +#define LL_RCC_PLLSAIM_DIV_57 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 57 */ +#define LL_RCC_PLLSAIM_DIV_58 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 58 */ +#define LL_RCC_PLLSAIM_DIV_59 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 59 */ +#define LL_RCC_PLLSAIM_DIV_60 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2) /*!< PLLSAI division factor for PLLSAIM output by 60 */ +#define LL_RCC_PLLSAIM_DIV_61 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 61 */ +#define LL_RCC_PLLSAIM_DIV_62 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1) /*!< PLLSAI division factor for PLLSAIM output by 62 */ +#define LL_RCC_PLLSAIM_DIV_63 (RCC_PLLSAICFGR_PLLSAIM_5 | RCC_PLLSAICFGR_PLLSAIM_4 | RCC_PLLSAICFGR_PLLSAIM_3 | RCC_PLLSAICFGR_PLLSAIM_2 | RCC_PLLSAICFGR_PLLSAIM_1 | RCC_PLLSAICFGR_PLLSAIM_0) /*!< PLLSAI division factor for PLLSAIM output by 63 */ +#else +#define LL_RCC_PLLSAIM_DIV_2 LL_RCC_PLLM_DIV_2 /*!< PLLSAI division factor for PLLSAIM output by 2 */ +#define LL_RCC_PLLSAIM_DIV_3 LL_RCC_PLLM_DIV_3 /*!< PLLSAI division factor for PLLSAIM output by 3 */ +#define LL_RCC_PLLSAIM_DIV_4 LL_RCC_PLLM_DIV_4 /*!< PLLSAI division factor for PLLSAIM output by 4 */ +#define LL_RCC_PLLSAIM_DIV_5 LL_RCC_PLLM_DIV_5 /*!< PLLSAI division factor for PLLSAIM output by 5 */ +#define LL_RCC_PLLSAIM_DIV_6 LL_RCC_PLLM_DIV_6 /*!< PLLSAI division factor for PLLSAIM output by 6 */ +#define LL_RCC_PLLSAIM_DIV_7 LL_RCC_PLLM_DIV_7 /*!< PLLSAI division factor for PLLSAIM output by 7 */ +#define LL_RCC_PLLSAIM_DIV_8 LL_RCC_PLLM_DIV_8 /*!< PLLSAI division factor for PLLSAIM output by 8 */ +#define LL_RCC_PLLSAIM_DIV_9 LL_RCC_PLLM_DIV_9 /*!< PLLSAI division factor for PLLSAIM output by 9 */ +#define LL_RCC_PLLSAIM_DIV_10 LL_RCC_PLLM_DIV_10 /*!< PLLSAI division factor for PLLSAIM output by 10 */ +#define LL_RCC_PLLSAIM_DIV_11 LL_RCC_PLLM_DIV_11 /*!< PLLSAI division factor for PLLSAIM output by 11 */ +#define LL_RCC_PLLSAIM_DIV_12 LL_RCC_PLLM_DIV_12 /*!< PLLSAI division factor for PLLSAIM output by 12 */ +#define LL_RCC_PLLSAIM_DIV_13 LL_RCC_PLLM_DIV_13 /*!< PLLSAI division factor for PLLSAIM output by 13 */ +#define LL_RCC_PLLSAIM_DIV_14 LL_RCC_PLLM_DIV_14 /*!< PLLSAI division factor for PLLSAIM output by 14 */ +#define LL_RCC_PLLSAIM_DIV_15 LL_RCC_PLLM_DIV_15 /*!< PLLSAI division factor for PLLSAIM output by 15 */ +#define LL_RCC_PLLSAIM_DIV_16 LL_RCC_PLLM_DIV_16 /*!< PLLSAI division factor for PLLSAIM output by 16 */ +#define LL_RCC_PLLSAIM_DIV_17 LL_RCC_PLLM_DIV_17 /*!< PLLSAI division factor for PLLSAIM output by 17 */ +#define LL_RCC_PLLSAIM_DIV_18 LL_RCC_PLLM_DIV_18 /*!< PLLSAI division factor for PLLSAIM output by 18 */ +#define LL_RCC_PLLSAIM_DIV_19 LL_RCC_PLLM_DIV_19 /*!< PLLSAI division factor for PLLSAIM output by 19 */ +#define LL_RCC_PLLSAIM_DIV_20 LL_RCC_PLLM_DIV_20 /*!< PLLSAI division factor for PLLSAIM output by 20 */ +#define LL_RCC_PLLSAIM_DIV_21 LL_RCC_PLLM_DIV_21 /*!< PLLSAI division factor for PLLSAIM output by 21 */ +#define LL_RCC_PLLSAIM_DIV_22 LL_RCC_PLLM_DIV_22 /*!< PLLSAI division factor for PLLSAIM output by 22 */ +#define LL_RCC_PLLSAIM_DIV_23 LL_RCC_PLLM_DIV_23 /*!< PLLSAI division factor for PLLSAIM output by 23 */ +#define LL_RCC_PLLSAIM_DIV_24 LL_RCC_PLLM_DIV_24 /*!< PLLSAI division factor for PLLSAIM output by 24 */ +#define LL_RCC_PLLSAIM_DIV_25 LL_RCC_PLLM_DIV_25 /*!< PLLSAI division factor for PLLSAIM output by 25 */ +#define LL_RCC_PLLSAIM_DIV_26 LL_RCC_PLLM_DIV_26 /*!< PLLSAI division factor for PLLSAIM output by 26 */ +#define LL_RCC_PLLSAIM_DIV_27 LL_RCC_PLLM_DIV_27 /*!< PLLSAI division factor for PLLSAIM output by 27 */ +#define LL_RCC_PLLSAIM_DIV_28 LL_RCC_PLLM_DIV_28 /*!< PLLSAI division factor for PLLSAIM output by 28 */ +#define LL_RCC_PLLSAIM_DIV_29 LL_RCC_PLLM_DIV_29 /*!< PLLSAI division factor for PLLSAIM output by 29 */ +#define LL_RCC_PLLSAIM_DIV_30 LL_RCC_PLLM_DIV_30 /*!< PLLSAI division factor for PLLSAIM output by 30 */ +#define LL_RCC_PLLSAIM_DIV_31 LL_RCC_PLLM_DIV_31 /*!< PLLSAI division factor for PLLSAIM output by 31 */ +#define LL_RCC_PLLSAIM_DIV_32 LL_RCC_PLLM_DIV_32 /*!< PLLSAI division factor for PLLSAIM output by 32 */ +#define LL_RCC_PLLSAIM_DIV_33 LL_RCC_PLLM_DIV_33 /*!< PLLSAI division factor for PLLSAIM output by 33 */ +#define LL_RCC_PLLSAIM_DIV_34 LL_RCC_PLLM_DIV_34 /*!< PLLSAI division factor for PLLSAIM output by 34 */ +#define LL_RCC_PLLSAIM_DIV_35 LL_RCC_PLLM_DIV_35 /*!< PLLSAI division factor for PLLSAIM output by 35 */ +#define LL_RCC_PLLSAIM_DIV_36 LL_RCC_PLLM_DIV_36 /*!< PLLSAI division factor for PLLSAIM output by 36 */ +#define LL_RCC_PLLSAIM_DIV_37 LL_RCC_PLLM_DIV_37 /*!< PLLSAI division factor for PLLSAIM output by 37 */ +#define LL_RCC_PLLSAIM_DIV_38 LL_RCC_PLLM_DIV_38 /*!< PLLSAI division factor for PLLSAIM output by 38 */ +#define LL_RCC_PLLSAIM_DIV_39 LL_RCC_PLLM_DIV_39 /*!< PLLSAI division factor for PLLSAIM output by 39 */ +#define LL_RCC_PLLSAIM_DIV_40 LL_RCC_PLLM_DIV_40 /*!< PLLSAI division factor for PLLSAIM output by 40 */ +#define LL_RCC_PLLSAIM_DIV_41 LL_RCC_PLLM_DIV_41 /*!< PLLSAI division factor for PLLSAIM output by 41 */ +#define LL_RCC_PLLSAIM_DIV_42 LL_RCC_PLLM_DIV_42 /*!< PLLSAI division factor for PLLSAIM output by 42 */ +#define LL_RCC_PLLSAIM_DIV_43 LL_RCC_PLLM_DIV_43 /*!< PLLSAI division factor for PLLSAIM output by 43 */ +#define LL_RCC_PLLSAIM_DIV_44 LL_RCC_PLLM_DIV_44 /*!< PLLSAI division factor for PLLSAIM output by 44 */ +#define LL_RCC_PLLSAIM_DIV_45 LL_RCC_PLLM_DIV_45 /*!< PLLSAI division factor for PLLSAIM output by 45 */ +#define LL_RCC_PLLSAIM_DIV_46 LL_RCC_PLLM_DIV_46 /*!< PLLSAI division factor for PLLSAIM output by 46 */ +#define LL_RCC_PLLSAIM_DIV_47 LL_RCC_PLLM_DIV_47 /*!< PLLSAI division factor for PLLSAIM output by 47 */ +#define LL_RCC_PLLSAIM_DIV_48 LL_RCC_PLLM_DIV_48 /*!< PLLSAI division factor for PLLSAIM output by 48 */ +#define LL_RCC_PLLSAIM_DIV_49 LL_RCC_PLLM_DIV_49 /*!< PLLSAI division factor for PLLSAIM output by 49 */ +#define LL_RCC_PLLSAIM_DIV_50 LL_RCC_PLLM_DIV_50 /*!< PLLSAI division factor for PLLSAIM output by 50 */ +#define LL_RCC_PLLSAIM_DIV_51 LL_RCC_PLLM_DIV_51 /*!< PLLSAI division factor for PLLSAIM output by 51 */ +#define LL_RCC_PLLSAIM_DIV_52 LL_RCC_PLLM_DIV_52 /*!< PLLSAI division factor for PLLSAIM output by 52 */ +#define LL_RCC_PLLSAIM_DIV_53 LL_RCC_PLLM_DIV_53 /*!< PLLSAI division factor for PLLSAIM output by 53 */ +#define LL_RCC_PLLSAIM_DIV_54 LL_RCC_PLLM_DIV_54 /*!< PLLSAI division factor for PLLSAIM output by 54 */ +#define LL_RCC_PLLSAIM_DIV_55 LL_RCC_PLLM_DIV_55 /*!< PLLSAI division factor for PLLSAIM output by 55 */ +#define LL_RCC_PLLSAIM_DIV_56 LL_RCC_PLLM_DIV_56 /*!< PLLSAI division factor for PLLSAIM output by 56 */ +#define LL_RCC_PLLSAIM_DIV_57 LL_RCC_PLLM_DIV_57 /*!< PLLSAI division factor for PLLSAIM output by 57 */ +#define LL_RCC_PLLSAIM_DIV_58 LL_RCC_PLLM_DIV_58 /*!< PLLSAI division factor for PLLSAIM output by 58 */ +#define LL_RCC_PLLSAIM_DIV_59 LL_RCC_PLLM_DIV_59 /*!< PLLSAI division factor for PLLSAIM output by 59 */ +#define LL_RCC_PLLSAIM_DIV_60 LL_RCC_PLLM_DIV_60 /*!< PLLSAI division factor for PLLSAIM output by 60 */ +#define LL_RCC_PLLSAIM_DIV_61 LL_RCC_PLLM_DIV_61 /*!< PLLSAI division factor for PLLSAIM output by 61 */ +#define LL_RCC_PLLSAIM_DIV_62 LL_RCC_PLLM_DIV_62 /*!< PLLSAI division factor for PLLSAIM output by 62 */ +#define LL_RCC_PLLSAIM_DIV_63 LL_RCC_PLLM_DIV_63 /*!< PLLSAI division factor for PLLSAIM output by 63 */ +#endif /* RCC_PLLSAICFGR_PLLSAIM */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLLSAIQ PLLSAIQ division factor (PLLSAIQ) + * @{ + */ +#define LL_RCC_PLLSAIQ_DIV_2 RCC_PLLSAICFGR_PLLSAIQ_1 /*!< PLLSAI division factor for PLLSAIQ output by 2 */ +#define LL_RCC_PLLSAIQ_DIV_3 (RCC_PLLSAICFGR_PLLSAIQ_1 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 3 */ +#define LL_RCC_PLLSAIQ_DIV_4 RCC_PLLSAICFGR_PLLSAIQ_2 /*!< PLLSAI division factor for PLLSAIQ output by 4 */ +#define LL_RCC_PLLSAIQ_DIV_5 (RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 5 */ +#define LL_RCC_PLLSAIQ_DIV_6 (RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_1) /*!< PLLSAI division factor for PLLSAIQ output by 6 */ +#define LL_RCC_PLLSAIQ_DIV_7 (RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_1 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 7 */ +#define LL_RCC_PLLSAIQ_DIV_8 RCC_PLLSAICFGR_PLLSAIQ_3 /*!< PLLSAI division factor for PLLSAIQ output by 8 */ +#define LL_RCC_PLLSAIQ_DIV_9 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 9 */ +#define LL_RCC_PLLSAIQ_DIV_10 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_1) /*!< PLLSAI division factor for PLLSAIQ output by 10 */ +#define LL_RCC_PLLSAIQ_DIV_11 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_1 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 11 */ +#define LL_RCC_PLLSAIQ_DIV_12 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_2) /*!< PLLSAI division factor for PLLSAIQ output by 12 */ +#define LL_RCC_PLLSAIQ_DIV_13 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 13 */ +#define LL_RCC_PLLSAIQ_DIV_14 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_1) /*!< PLLSAI division factor for PLLSAIQ output by 14 */ +#define LL_RCC_PLLSAIQ_DIV_15 (RCC_PLLSAICFGR_PLLSAIQ_3 | RCC_PLLSAICFGR_PLLSAIQ_2 | RCC_PLLSAICFGR_PLLSAIQ_1 | RCC_PLLSAICFGR_PLLSAIQ_0) /*!< PLLSAI division factor for PLLSAIQ output by 15 */ +/** + * @} + */ + +#if defined(RCC_DCKCFGR_PLLSAIDIVQ) +/** @defgroup RCC_LL_EC_PLLSAIDIVQ PLLSAIDIVQ division factor (PLLSAIDIVQ) + * @{ + */ +#define LL_RCC_PLLSAIDIVQ_DIV_1 0x00000000U /*!< PLLSAI division factor for PLLSAIDIVQ output by 1 */ +#define LL_RCC_PLLSAIDIVQ_DIV_2 RCC_DCKCFGR_PLLSAIDIVQ_0 /*!< PLLSAI division factor for PLLSAIDIVQ output by 2 */ +#define LL_RCC_PLLSAIDIVQ_DIV_3 RCC_DCKCFGR_PLLSAIDIVQ_1 /*!< PLLSAI division factor for PLLSAIDIVQ output by 3 */ +#define LL_RCC_PLLSAIDIVQ_DIV_4 (RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 4 */ +#define LL_RCC_PLLSAIDIVQ_DIV_5 RCC_DCKCFGR_PLLSAIDIVQ_2 /*!< PLLSAI division factor for PLLSAIDIVQ output by 5 */ +#define LL_RCC_PLLSAIDIVQ_DIV_6 (RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 6 */ +#define LL_RCC_PLLSAIDIVQ_DIV_7 (RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 7 */ +#define LL_RCC_PLLSAIDIVQ_DIV_8 (RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 8 */ +#define LL_RCC_PLLSAIDIVQ_DIV_9 RCC_DCKCFGR_PLLSAIDIVQ_3 /*!< PLLSAI division factor for PLLSAIDIVQ output by 9 */ +#define LL_RCC_PLLSAIDIVQ_DIV_10 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 10 */ +#define LL_RCC_PLLSAIDIVQ_DIV_11 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 11 */ +#define LL_RCC_PLLSAIDIVQ_DIV_12 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 12 */ +#define LL_RCC_PLLSAIDIVQ_DIV_13 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2) /*!< PLLSAI division factor for PLLSAIDIVQ output by 13 */ +#define LL_RCC_PLLSAIDIVQ_DIV_14 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 14 */ +#define LL_RCC_PLLSAIDIVQ_DIV_15 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 15 */ +#define LL_RCC_PLLSAIDIVQ_DIV_16 (RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 16 */ +#define LL_RCC_PLLSAIDIVQ_DIV_17 RCC_DCKCFGR_PLLSAIDIVQ_4 /*!< PLLSAI division factor for PLLSAIDIVQ output by 17 */ +#define LL_RCC_PLLSAIDIVQ_DIV_18 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 18 */ +#define LL_RCC_PLLSAIDIVQ_DIV_19 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 19 */ +#define LL_RCC_PLLSAIDIVQ_DIV_20 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 20 */ +#define LL_RCC_PLLSAIDIVQ_DIV_21 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_2) /*!< PLLSAI division factor for PLLSAIDIVQ output by 21 */ +#define LL_RCC_PLLSAIDIVQ_DIV_22 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 22 */ +#define LL_RCC_PLLSAIDIVQ_DIV_23 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 23 */ +#define LL_RCC_PLLSAIDIVQ_DIV_24 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 24 */ +#define LL_RCC_PLLSAIDIVQ_DIV_25 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3) /*!< PLLSAI division factor for PLLSAIDIVQ output by 25 */ +#define LL_RCC_PLLSAIDIVQ_DIV_26 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 26 */ +#define LL_RCC_PLLSAIDIVQ_DIV_27 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 27 */ +#define LL_RCC_PLLSAIDIVQ_DIV_28 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 28 */ +#define LL_RCC_PLLSAIDIVQ_DIV_29 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2) /*!< PLLSAI division factor for PLLSAIDIVQ output by 29 */ +#define LL_RCC_PLLSAIDIVQ_DIV_30 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 30 */ +#define LL_RCC_PLLSAIDIVQ_DIV_31 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1) /*!< PLLSAI division factor for PLLSAIDIVQ output by 31 */ +#define LL_RCC_PLLSAIDIVQ_DIV_32 (RCC_DCKCFGR_PLLSAIDIVQ_4 | RCC_DCKCFGR_PLLSAIDIVQ_3 | RCC_DCKCFGR_PLLSAIDIVQ_2 | RCC_DCKCFGR_PLLSAIDIVQ_1 | RCC_DCKCFGR_PLLSAIDIVQ_0) /*!< PLLSAI division factor for PLLSAIDIVQ output by 32 */ +/** + * @} + */ +#endif /* RCC_DCKCFGR_PLLSAIDIVQ */ + +#if defined(RCC_PLLSAICFGR_PLLSAIR) +/** @defgroup RCC_LL_EC_PLLSAIR PLLSAIR division factor (PLLSAIR) + * @{ + */ +#define LL_RCC_PLLSAIR_DIV_2 RCC_PLLSAICFGR_PLLSAIR_1 /*!< PLLSAI division factor for PLLSAIR output by 2 */ +#define LL_RCC_PLLSAIR_DIV_3 (RCC_PLLSAICFGR_PLLSAIR_1 | RCC_PLLSAICFGR_PLLSAIR_0) /*!< PLLSAI division factor for PLLSAIR output by 3 */ +#define LL_RCC_PLLSAIR_DIV_4 RCC_PLLSAICFGR_PLLSAIR_2 /*!< PLLSAI division factor for PLLSAIR output by 4 */ +#define LL_RCC_PLLSAIR_DIV_5 (RCC_PLLSAICFGR_PLLSAIR_2 | RCC_PLLSAICFGR_PLLSAIR_0) /*!< PLLSAI division factor for PLLSAIR output by 5 */ +#define LL_RCC_PLLSAIR_DIV_6 (RCC_PLLSAICFGR_PLLSAIR_2 | RCC_PLLSAICFGR_PLLSAIR_1) /*!< PLLSAI division factor for PLLSAIR output by 6 */ +#define LL_RCC_PLLSAIR_DIV_7 (RCC_PLLSAICFGR_PLLSAIR_2 | RCC_PLLSAICFGR_PLLSAIR_1 | RCC_PLLSAICFGR_PLLSAIR_0) /*!< PLLSAI division factor for PLLSAIR output by 7 */ +/** + * @} + */ +#endif /* RCC_PLLSAICFGR_PLLSAIR */ + +#if defined(RCC_DCKCFGR_PLLSAIDIVR) +/** @defgroup RCC_LL_EC_PLLSAIDIVR PLLSAIDIVR division factor (PLLSAIDIVR) + * @{ + */ +#define LL_RCC_PLLSAIDIVR_DIV_2 0x00000000U /*!< PLLSAI division factor for PLLSAIDIVR output by 2 */ +#define LL_RCC_PLLSAIDIVR_DIV_4 RCC_DCKCFGR_PLLSAIDIVR_0 /*!< PLLSAI division factor for PLLSAIDIVR output by 4 */ +#define LL_RCC_PLLSAIDIVR_DIV_8 RCC_DCKCFGR_PLLSAIDIVR_1 /*!< PLLSAI division factor for PLLSAIDIVR output by 8 */ +#define LL_RCC_PLLSAIDIVR_DIV_16 (RCC_DCKCFGR_PLLSAIDIVR_1 | RCC_DCKCFGR_PLLSAIDIVR_0) /*!< PLLSAI division factor for PLLSAIDIVR output by 16 */ +/** + * @} + */ +#endif /* RCC_DCKCFGR_PLLSAIDIVR */ + +#if defined(RCC_PLLSAICFGR_PLLSAIP) +/** @defgroup RCC_LL_EC_PLLSAIP PLLSAIP division factor (PLLSAIP) + * @{ + */ +#define LL_RCC_PLLSAIP_DIV_2 0x00000000U /*!< PLLSAI division factor for PLLSAIP output by 2 */ +#define LL_RCC_PLLSAIP_DIV_4 RCC_PLLSAICFGR_PLLSAIP_0 /*!< PLLSAI division factor for PLLSAIP output by 4 */ +#define LL_RCC_PLLSAIP_DIV_6 RCC_PLLSAICFGR_PLLSAIP_1 /*!< PLLSAI division factor for PLLSAIP output by 6 */ +#define LL_RCC_PLLSAIP_DIV_8 (RCC_PLLSAICFGR_PLLSAIP_1 | RCC_PLLSAICFGR_PLLSAIP_0) /*!< PLLSAI division factor for PLLSAIP output by 8 */ +/** + * @} + */ +#endif /* RCC_PLLSAICFGR_PLLSAIP */ +#endif /* RCC_PLLSAI_SUPPORT */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in RCC register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_RCC_WriteReg(__REG__, __VALUE__) WRITE_REG(RCC->__REG__, (__VALUE__)) + +/** + * @brief Read a value in RCC register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_RCC_ReadReg(__REG__) READ_REG(RCC->__REG__) +/** + * @} + */ + +/** @defgroup RCC_LL_EM_CALC_FREQ Calculate frequencies + * @{ + */ + +/** + * @brief Helper macro to calculate the PLLCLK frequency on system domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetP ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @arg @ref LL_RCC_PLLM_DIV_9 + * @arg @ref LL_RCC_PLLM_DIV_10 + * @arg @ref LL_RCC_PLLM_DIV_11 + * @arg @ref LL_RCC_PLLM_DIV_12 + * @arg @ref LL_RCC_PLLM_DIV_13 + * @arg @ref LL_RCC_PLLM_DIV_14 + * @arg @ref LL_RCC_PLLM_DIV_15 + * @arg @ref LL_RCC_PLLM_DIV_16 + * @arg @ref LL_RCC_PLLM_DIV_17 + * @arg @ref LL_RCC_PLLM_DIV_18 + * @arg @ref LL_RCC_PLLM_DIV_19 + * @arg @ref LL_RCC_PLLM_DIV_20 + * @arg @ref LL_RCC_PLLM_DIV_21 + * @arg @ref LL_RCC_PLLM_DIV_22 + * @arg @ref LL_RCC_PLLM_DIV_23 + * @arg @ref LL_RCC_PLLM_DIV_24 + * @arg @ref LL_RCC_PLLM_DIV_25 + * @arg @ref LL_RCC_PLLM_DIV_26 + * @arg @ref LL_RCC_PLLM_DIV_27 + * @arg @ref LL_RCC_PLLM_DIV_28 + * @arg @ref LL_RCC_PLLM_DIV_29 + * @arg @ref LL_RCC_PLLM_DIV_30 + * @arg @ref LL_RCC_PLLM_DIV_31 + * @arg @ref LL_RCC_PLLM_DIV_32 + * @arg @ref LL_RCC_PLLM_DIV_33 + * @arg @ref LL_RCC_PLLM_DIV_34 + * @arg @ref LL_RCC_PLLM_DIV_35 + * @arg @ref LL_RCC_PLLM_DIV_36 + * @arg @ref LL_RCC_PLLM_DIV_37 + * @arg @ref LL_RCC_PLLM_DIV_38 + * @arg @ref LL_RCC_PLLM_DIV_39 + * @arg @ref LL_RCC_PLLM_DIV_40 + * @arg @ref LL_RCC_PLLM_DIV_41 + * @arg @ref LL_RCC_PLLM_DIV_42 + * @arg @ref LL_RCC_PLLM_DIV_43 + * @arg @ref LL_RCC_PLLM_DIV_44 + * @arg @ref LL_RCC_PLLM_DIV_45 + * @arg @ref LL_RCC_PLLM_DIV_46 + * @arg @ref LL_RCC_PLLM_DIV_47 + * @arg @ref LL_RCC_PLLM_DIV_48 + * @arg @ref LL_RCC_PLLM_DIV_49 + * @arg @ref LL_RCC_PLLM_DIV_50 + * @arg @ref LL_RCC_PLLM_DIV_51 + * @arg @ref LL_RCC_PLLM_DIV_52 + * @arg @ref LL_RCC_PLLM_DIV_53 + * @arg @ref LL_RCC_PLLM_DIV_54 + * @arg @ref LL_RCC_PLLM_DIV_55 + * @arg @ref LL_RCC_PLLM_DIV_56 + * @arg @ref LL_RCC_PLLM_DIV_57 + * @arg @ref LL_RCC_PLLM_DIV_58 + * @arg @ref LL_RCC_PLLM_DIV_59 + * @arg @ref LL_RCC_PLLM_DIV_60 + * @arg @ref LL_RCC_PLLM_DIV_61 + * @arg @ref LL_RCC_PLLM_DIV_62 + * @arg @ref LL_RCC_PLLM_DIV_63 + * @param __PLLN__ Between 50/192(*) and 432 + * + * (*) value not defined in all devices. + * @param __PLLP__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_8 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ + ((((__PLLP__) >> RCC_PLLCFGR_PLLP_Pos ) + 1U) * 2U)) + +#if defined(RCC_PLLR_SYSCLK_SUPPORT) +/** + * @brief Helper macro to calculate the PLLRCLK frequency on system domain + * @note ex: @ref __LL_RCC_CALC_PLLRCLK_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @arg @ref LL_RCC_PLLM_DIV_9 + * @arg @ref LL_RCC_PLLM_DIV_10 + * @arg @ref LL_RCC_PLLM_DIV_11 + * @arg @ref LL_RCC_PLLM_DIV_12 + * @arg @ref LL_RCC_PLLM_DIV_13 + * @arg @ref LL_RCC_PLLM_DIV_14 + * @arg @ref LL_RCC_PLLM_DIV_15 + * @arg @ref LL_RCC_PLLM_DIV_16 + * @arg @ref LL_RCC_PLLM_DIV_17 + * @arg @ref LL_RCC_PLLM_DIV_18 + * @arg @ref LL_RCC_PLLM_DIV_19 + * @arg @ref LL_RCC_PLLM_DIV_20 + * @arg @ref LL_RCC_PLLM_DIV_21 + * @arg @ref LL_RCC_PLLM_DIV_22 + * @arg @ref LL_RCC_PLLM_DIV_23 + * @arg @ref LL_RCC_PLLM_DIV_24 + * @arg @ref LL_RCC_PLLM_DIV_25 + * @arg @ref LL_RCC_PLLM_DIV_26 + * @arg @ref LL_RCC_PLLM_DIV_27 + * @arg @ref LL_RCC_PLLM_DIV_28 + * @arg @ref LL_RCC_PLLM_DIV_29 + * @arg @ref LL_RCC_PLLM_DIV_30 + * @arg @ref LL_RCC_PLLM_DIV_31 + * @arg @ref LL_RCC_PLLM_DIV_32 + * @arg @ref LL_RCC_PLLM_DIV_33 + * @arg @ref LL_RCC_PLLM_DIV_34 + * @arg @ref LL_RCC_PLLM_DIV_35 + * @arg @ref LL_RCC_PLLM_DIV_36 + * @arg @ref LL_RCC_PLLM_DIV_37 + * @arg @ref LL_RCC_PLLM_DIV_38 + * @arg @ref LL_RCC_PLLM_DIV_39 + * @arg @ref LL_RCC_PLLM_DIV_40 + * @arg @ref LL_RCC_PLLM_DIV_41 + * @arg @ref LL_RCC_PLLM_DIV_42 + * @arg @ref LL_RCC_PLLM_DIV_43 + * @arg @ref LL_RCC_PLLM_DIV_44 + * @arg @ref LL_RCC_PLLM_DIV_45 + * @arg @ref LL_RCC_PLLM_DIV_46 + * @arg @ref LL_RCC_PLLM_DIV_47 + * @arg @ref LL_RCC_PLLM_DIV_48 + * @arg @ref LL_RCC_PLLM_DIV_49 + * @arg @ref LL_RCC_PLLM_DIV_50 + * @arg @ref LL_RCC_PLLM_DIV_51 + * @arg @ref LL_RCC_PLLM_DIV_52 + * @arg @ref LL_RCC_PLLM_DIV_53 + * @arg @ref LL_RCC_PLLM_DIV_54 + * @arg @ref LL_RCC_PLLM_DIV_55 + * @arg @ref LL_RCC_PLLM_DIV_56 + * @arg @ref LL_RCC_PLLM_DIV_57 + * @arg @ref LL_RCC_PLLM_DIV_58 + * @arg @ref LL_RCC_PLLM_DIV_59 + * @arg @ref LL_RCC_PLLM_DIV_60 + * @arg @ref LL_RCC_PLLM_DIV_61 + * @arg @ref LL_RCC_PLLM_DIV_62 + * @arg @ref LL_RCC_PLLM_DIV_63 + * @param __PLLN__ Between 50 and 432 + * @param __PLLR__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLR_DIV_2 + * @arg @ref LL_RCC_PLLR_DIV_3 + * @arg @ref LL_RCC_PLLR_DIV_4 + * @arg @ref LL_RCC_PLLR_DIV_5 + * @arg @ref LL_RCC_PLLR_DIV_6 + * @arg @ref LL_RCC_PLLR_DIV_7 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLRCLK_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ + ((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos )) + +#endif /* RCC_PLLR_SYSCLK_SUPPORT */ + +/** + * @brief Helper macro to calculate the PLLCLK frequency used on 48M domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetQ ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @arg @ref LL_RCC_PLLM_DIV_9 + * @arg @ref LL_RCC_PLLM_DIV_10 + * @arg @ref LL_RCC_PLLM_DIV_11 + * @arg @ref LL_RCC_PLLM_DIV_12 + * @arg @ref LL_RCC_PLLM_DIV_13 + * @arg @ref LL_RCC_PLLM_DIV_14 + * @arg @ref LL_RCC_PLLM_DIV_15 + * @arg @ref LL_RCC_PLLM_DIV_16 + * @arg @ref LL_RCC_PLLM_DIV_17 + * @arg @ref LL_RCC_PLLM_DIV_18 + * @arg @ref LL_RCC_PLLM_DIV_19 + * @arg @ref LL_RCC_PLLM_DIV_20 + * @arg @ref LL_RCC_PLLM_DIV_21 + * @arg @ref LL_RCC_PLLM_DIV_22 + * @arg @ref LL_RCC_PLLM_DIV_23 + * @arg @ref LL_RCC_PLLM_DIV_24 + * @arg @ref LL_RCC_PLLM_DIV_25 + * @arg @ref LL_RCC_PLLM_DIV_26 + * @arg @ref LL_RCC_PLLM_DIV_27 + * @arg @ref LL_RCC_PLLM_DIV_28 + * @arg @ref LL_RCC_PLLM_DIV_29 + * @arg @ref LL_RCC_PLLM_DIV_30 + * @arg @ref LL_RCC_PLLM_DIV_31 + * @arg @ref LL_RCC_PLLM_DIV_32 + * @arg @ref LL_RCC_PLLM_DIV_33 + * @arg @ref LL_RCC_PLLM_DIV_34 + * @arg @ref LL_RCC_PLLM_DIV_35 + * @arg @ref LL_RCC_PLLM_DIV_36 + * @arg @ref LL_RCC_PLLM_DIV_37 + * @arg @ref LL_RCC_PLLM_DIV_38 + * @arg @ref LL_RCC_PLLM_DIV_39 + * @arg @ref LL_RCC_PLLM_DIV_40 + * @arg @ref LL_RCC_PLLM_DIV_41 + * @arg @ref LL_RCC_PLLM_DIV_42 + * @arg @ref LL_RCC_PLLM_DIV_43 + * @arg @ref LL_RCC_PLLM_DIV_44 + * @arg @ref LL_RCC_PLLM_DIV_45 + * @arg @ref LL_RCC_PLLM_DIV_46 + * @arg @ref LL_RCC_PLLM_DIV_47 + * @arg @ref LL_RCC_PLLM_DIV_48 + * @arg @ref LL_RCC_PLLM_DIV_49 + * @arg @ref LL_RCC_PLLM_DIV_50 + * @arg @ref LL_RCC_PLLM_DIV_51 + * @arg @ref LL_RCC_PLLM_DIV_52 + * @arg @ref LL_RCC_PLLM_DIV_53 + * @arg @ref LL_RCC_PLLM_DIV_54 + * @arg @ref LL_RCC_PLLM_DIV_55 + * @arg @ref LL_RCC_PLLM_DIV_56 + * @arg @ref LL_RCC_PLLM_DIV_57 + * @arg @ref LL_RCC_PLLM_DIV_58 + * @arg @ref LL_RCC_PLLM_DIV_59 + * @arg @ref LL_RCC_PLLM_DIV_60 + * @arg @ref LL_RCC_PLLM_DIV_61 + * @arg @ref LL_RCC_PLLM_DIV_62 + * @arg @ref LL_RCC_PLLM_DIV_63 + * @param __PLLN__ Between 50/192(*) and 432 + * + * (*) value not defined in all devices. + * @param __PLLQ__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @arg @ref LL_RCC_PLLQ_DIV_9 + * @arg @ref LL_RCC_PLLQ_DIV_10 + * @arg @ref LL_RCC_PLLQ_DIV_11 + * @arg @ref LL_RCC_PLLQ_DIV_12 + * @arg @ref LL_RCC_PLLQ_DIV_13 + * @arg @ref LL_RCC_PLLQ_DIV_14 + * @arg @ref LL_RCC_PLLQ_DIV_15 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_48M_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ + ((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos )) + +#if defined(DSI) +/** + * @brief Helper macro to calculate the PLLCLK frequency used on DSI + * @note ex: @ref __LL_RCC_CALC_PLLCLK_DSI_FREQ (HSE_VALUE, @ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @arg @ref LL_RCC_PLLM_DIV_9 + * @arg @ref LL_RCC_PLLM_DIV_10 + * @arg @ref LL_RCC_PLLM_DIV_11 + * @arg @ref LL_RCC_PLLM_DIV_12 + * @arg @ref LL_RCC_PLLM_DIV_13 + * @arg @ref LL_RCC_PLLM_DIV_14 + * @arg @ref LL_RCC_PLLM_DIV_15 + * @arg @ref LL_RCC_PLLM_DIV_16 + * @arg @ref LL_RCC_PLLM_DIV_17 + * @arg @ref LL_RCC_PLLM_DIV_18 + * @arg @ref LL_RCC_PLLM_DIV_19 + * @arg @ref LL_RCC_PLLM_DIV_20 + * @arg @ref LL_RCC_PLLM_DIV_21 + * @arg @ref LL_RCC_PLLM_DIV_22 + * @arg @ref LL_RCC_PLLM_DIV_23 + * @arg @ref LL_RCC_PLLM_DIV_24 + * @arg @ref LL_RCC_PLLM_DIV_25 + * @arg @ref LL_RCC_PLLM_DIV_26 + * @arg @ref LL_RCC_PLLM_DIV_27 + * @arg @ref LL_RCC_PLLM_DIV_28 + * @arg @ref LL_RCC_PLLM_DIV_29 + * @arg @ref LL_RCC_PLLM_DIV_30 + * @arg @ref LL_RCC_PLLM_DIV_31 + * @arg @ref LL_RCC_PLLM_DIV_32 + * @arg @ref LL_RCC_PLLM_DIV_33 + * @arg @ref LL_RCC_PLLM_DIV_34 + * @arg @ref LL_RCC_PLLM_DIV_35 + * @arg @ref LL_RCC_PLLM_DIV_36 + * @arg @ref LL_RCC_PLLM_DIV_37 + * @arg @ref LL_RCC_PLLM_DIV_38 + * @arg @ref LL_RCC_PLLM_DIV_39 + * @arg @ref LL_RCC_PLLM_DIV_40 + * @arg @ref LL_RCC_PLLM_DIV_41 + * @arg @ref LL_RCC_PLLM_DIV_42 + * @arg @ref LL_RCC_PLLM_DIV_43 + * @arg @ref LL_RCC_PLLM_DIV_44 + * @arg @ref LL_RCC_PLLM_DIV_45 + * @arg @ref LL_RCC_PLLM_DIV_46 + * @arg @ref LL_RCC_PLLM_DIV_47 + * @arg @ref LL_RCC_PLLM_DIV_48 + * @arg @ref LL_RCC_PLLM_DIV_49 + * @arg @ref LL_RCC_PLLM_DIV_50 + * @arg @ref LL_RCC_PLLM_DIV_51 + * @arg @ref LL_RCC_PLLM_DIV_52 + * @arg @ref LL_RCC_PLLM_DIV_53 + * @arg @ref LL_RCC_PLLM_DIV_54 + * @arg @ref LL_RCC_PLLM_DIV_55 + * @arg @ref LL_RCC_PLLM_DIV_56 + * @arg @ref LL_RCC_PLLM_DIV_57 + * @arg @ref LL_RCC_PLLM_DIV_58 + * @arg @ref LL_RCC_PLLM_DIV_59 + * @arg @ref LL_RCC_PLLM_DIV_60 + * @arg @ref LL_RCC_PLLM_DIV_61 + * @arg @ref LL_RCC_PLLM_DIV_62 + * @arg @ref LL_RCC_PLLM_DIV_63 + * @param __PLLN__ Between 50 and 432 + * @param __PLLR__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLR_DIV_2 + * @arg @ref LL_RCC_PLLR_DIV_3 + * @arg @ref LL_RCC_PLLR_DIV_4 + * @arg @ref LL_RCC_PLLR_DIV_5 + * @arg @ref LL_RCC_PLLR_DIV_6 + * @arg @ref LL_RCC_PLLR_DIV_7 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_DSI_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ + ((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos )) +#endif /* DSI */ + +#if defined(RCC_PLLR_I2S_CLKSOURCE_SUPPORT) +/** + * @brief Helper macro to calculate the PLLCLK frequency used on I2S + * @note ex: @ref __LL_RCC_CALC_PLLCLK_I2S_FREQ (HSE_VALUE, @ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @arg @ref LL_RCC_PLLM_DIV_9 + * @arg @ref LL_RCC_PLLM_DIV_10 + * @arg @ref LL_RCC_PLLM_DIV_11 + * @arg @ref LL_RCC_PLLM_DIV_12 + * @arg @ref LL_RCC_PLLM_DIV_13 + * @arg @ref LL_RCC_PLLM_DIV_14 + * @arg @ref LL_RCC_PLLM_DIV_15 + * @arg @ref LL_RCC_PLLM_DIV_16 + * @arg @ref LL_RCC_PLLM_DIV_17 + * @arg @ref LL_RCC_PLLM_DIV_18 + * @arg @ref LL_RCC_PLLM_DIV_19 + * @arg @ref LL_RCC_PLLM_DIV_20 + * @arg @ref LL_RCC_PLLM_DIV_21 + * @arg @ref LL_RCC_PLLM_DIV_22 + * @arg @ref LL_RCC_PLLM_DIV_23 + * @arg @ref LL_RCC_PLLM_DIV_24 + * @arg @ref LL_RCC_PLLM_DIV_25 + * @arg @ref LL_RCC_PLLM_DIV_26 + * @arg @ref LL_RCC_PLLM_DIV_27 + * @arg @ref LL_RCC_PLLM_DIV_28 + * @arg @ref LL_RCC_PLLM_DIV_29 + * @arg @ref LL_RCC_PLLM_DIV_30 + * @arg @ref LL_RCC_PLLM_DIV_31 + * @arg @ref LL_RCC_PLLM_DIV_32 + * @arg @ref LL_RCC_PLLM_DIV_33 + * @arg @ref LL_RCC_PLLM_DIV_34 + * @arg @ref LL_RCC_PLLM_DIV_35 + * @arg @ref LL_RCC_PLLM_DIV_36 + * @arg @ref LL_RCC_PLLM_DIV_37 + * @arg @ref LL_RCC_PLLM_DIV_38 + * @arg @ref LL_RCC_PLLM_DIV_39 + * @arg @ref LL_RCC_PLLM_DIV_40 + * @arg @ref LL_RCC_PLLM_DIV_41 + * @arg @ref LL_RCC_PLLM_DIV_42 + * @arg @ref LL_RCC_PLLM_DIV_43 + * @arg @ref LL_RCC_PLLM_DIV_44 + * @arg @ref LL_RCC_PLLM_DIV_45 + * @arg @ref LL_RCC_PLLM_DIV_46 + * @arg @ref LL_RCC_PLLM_DIV_47 + * @arg @ref LL_RCC_PLLM_DIV_48 + * @arg @ref LL_RCC_PLLM_DIV_49 + * @arg @ref LL_RCC_PLLM_DIV_50 + * @arg @ref LL_RCC_PLLM_DIV_51 + * @arg @ref LL_RCC_PLLM_DIV_52 + * @arg @ref LL_RCC_PLLM_DIV_53 + * @arg @ref LL_RCC_PLLM_DIV_54 + * @arg @ref LL_RCC_PLLM_DIV_55 + * @arg @ref LL_RCC_PLLM_DIV_56 + * @arg @ref LL_RCC_PLLM_DIV_57 + * @arg @ref LL_RCC_PLLM_DIV_58 + * @arg @ref LL_RCC_PLLM_DIV_59 + * @arg @ref LL_RCC_PLLM_DIV_60 + * @arg @ref LL_RCC_PLLM_DIV_61 + * @arg @ref LL_RCC_PLLM_DIV_62 + * @arg @ref LL_RCC_PLLM_DIV_63 + * @param __PLLN__ Between 50 and 432 + * @param __PLLR__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLR_DIV_2 + * @arg @ref LL_RCC_PLLR_DIV_3 + * @arg @ref LL_RCC_PLLR_DIV_4 + * @arg @ref LL_RCC_PLLR_DIV_5 + * @arg @ref LL_RCC_PLLR_DIV_6 + * @arg @ref LL_RCC_PLLR_DIV_7 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_I2S_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ + ((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos )) +#endif /* RCC_PLLR_I2S_CLKSOURCE_SUPPORT */ + +#if defined(SPDIFRX) +/** + * @brief Helper macro to calculate the PLLCLK frequency used on SPDIFRX + * @note ex: @ref __LL_RCC_CALC_PLLCLK_SPDIFRX_FREQ (HSE_VALUE, @ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @arg @ref LL_RCC_PLLM_DIV_9 + * @arg @ref LL_RCC_PLLM_DIV_10 + * @arg @ref LL_RCC_PLLM_DIV_11 + * @arg @ref LL_RCC_PLLM_DIV_12 + * @arg @ref LL_RCC_PLLM_DIV_13 + * @arg @ref LL_RCC_PLLM_DIV_14 + * @arg @ref LL_RCC_PLLM_DIV_15 + * @arg @ref LL_RCC_PLLM_DIV_16 + * @arg @ref LL_RCC_PLLM_DIV_17 + * @arg @ref LL_RCC_PLLM_DIV_18 + * @arg @ref LL_RCC_PLLM_DIV_19 + * @arg @ref LL_RCC_PLLM_DIV_20 + * @arg @ref LL_RCC_PLLM_DIV_21 + * @arg @ref LL_RCC_PLLM_DIV_22 + * @arg @ref LL_RCC_PLLM_DIV_23 + * @arg @ref LL_RCC_PLLM_DIV_24 + * @arg @ref LL_RCC_PLLM_DIV_25 + * @arg @ref LL_RCC_PLLM_DIV_26 + * @arg @ref LL_RCC_PLLM_DIV_27 + * @arg @ref LL_RCC_PLLM_DIV_28 + * @arg @ref LL_RCC_PLLM_DIV_29 + * @arg @ref LL_RCC_PLLM_DIV_30 + * @arg @ref LL_RCC_PLLM_DIV_31 + * @arg @ref LL_RCC_PLLM_DIV_32 + * @arg @ref LL_RCC_PLLM_DIV_33 + * @arg @ref LL_RCC_PLLM_DIV_34 + * @arg @ref LL_RCC_PLLM_DIV_35 + * @arg @ref LL_RCC_PLLM_DIV_36 + * @arg @ref LL_RCC_PLLM_DIV_37 + * @arg @ref LL_RCC_PLLM_DIV_38 + * @arg @ref LL_RCC_PLLM_DIV_39 + * @arg @ref LL_RCC_PLLM_DIV_40 + * @arg @ref LL_RCC_PLLM_DIV_41 + * @arg @ref LL_RCC_PLLM_DIV_42 + * @arg @ref LL_RCC_PLLM_DIV_43 + * @arg @ref LL_RCC_PLLM_DIV_44 + * @arg @ref LL_RCC_PLLM_DIV_45 + * @arg @ref LL_RCC_PLLM_DIV_46 + * @arg @ref LL_RCC_PLLM_DIV_47 + * @arg @ref LL_RCC_PLLM_DIV_48 + * @arg @ref LL_RCC_PLLM_DIV_49 + * @arg @ref LL_RCC_PLLM_DIV_50 + * @arg @ref LL_RCC_PLLM_DIV_51 + * @arg @ref LL_RCC_PLLM_DIV_52 + * @arg @ref LL_RCC_PLLM_DIV_53 + * @arg @ref LL_RCC_PLLM_DIV_54 + * @arg @ref LL_RCC_PLLM_DIV_55 + * @arg @ref LL_RCC_PLLM_DIV_56 + * @arg @ref LL_RCC_PLLM_DIV_57 + * @arg @ref LL_RCC_PLLM_DIV_58 + * @arg @ref LL_RCC_PLLM_DIV_59 + * @arg @ref LL_RCC_PLLM_DIV_60 + * @arg @ref LL_RCC_PLLM_DIV_61 + * @arg @ref LL_RCC_PLLM_DIV_62 + * @arg @ref LL_RCC_PLLM_DIV_63 + * @param __PLLN__ Between 50 and 432 + * @param __PLLR__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLR_DIV_2 + * @arg @ref LL_RCC_PLLR_DIV_3 + * @arg @ref LL_RCC_PLLR_DIV_4 + * @arg @ref LL_RCC_PLLR_DIV_5 + * @arg @ref LL_RCC_PLLR_DIV_6 + * @arg @ref LL_RCC_PLLR_DIV_7 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_SPDIFRX_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ + ((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos )) +#endif /* SPDIFRX */ + +#if defined(RCC_PLLCFGR_PLLR) +#if defined(SAI1) +/** + * @brief Helper macro to calculate the PLLCLK frequency used on SAI + * @note ex: @ref __LL_RCC_CALC_PLLCLK_SAI_FREQ (HSE_VALUE, @ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR (), @ref LL_RCC_PLL_GetDIVR ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @arg @ref LL_RCC_PLLM_DIV_9 + * @arg @ref LL_RCC_PLLM_DIV_10 + * @arg @ref LL_RCC_PLLM_DIV_11 + * @arg @ref LL_RCC_PLLM_DIV_12 + * @arg @ref LL_RCC_PLLM_DIV_13 + * @arg @ref LL_RCC_PLLM_DIV_14 + * @arg @ref LL_RCC_PLLM_DIV_15 + * @arg @ref LL_RCC_PLLM_DIV_16 + * @arg @ref LL_RCC_PLLM_DIV_17 + * @arg @ref LL_RCC_PLLM_DIV_18 + * @arg @ref LL_RCC_PLLM_DIV_19 + * @arg @ref LL_RCC_PLLM_DIV_20 + * @arg @ref LL_RCC_PLLM_DIV_21 + * @arg @ref LL_RCC_PLLM_DIV_22 + * @arg @ref LL_RCC_PLLM_DIV_23 + * @arg @ref LL_RCC_PLLM_DIV_24 + * @arg @ref LL_RCC_PLLM_DIV_25 + * @arg @ref LL_RCC_PLLM_DIV_26 + * @arg @ref LL_RCC_PLLM_DIV_27 + * @arg @ref LL_RCC_PLLM_DIV_28 + * @arg @ref LL_RCC_PLLM_DIV_29 + * @arg @ref LL_RCC_PLLM_DIV_30 + * @arg @ref LL_RCC_PLLM_DIV_31 + * @arg @ref LL_RCC_PLLM_DIV_32 + * @arg @ref LL_RCC_PLLM_DIV_33 + * @arg @ref LL_RCC_PLLM_DIV_34 + * @arg @ref LL_RCC_PLLM_DIV_35 + * @arg @ref LL_RCC_PLLM_DIV_36 + * @arg @ref LL_RCC_PLLM_DIV_37 + * @arg @ref LL_RCC_PLLM_DIV_38 + * @arg @ref LL_RCC_PLLM_DIV_39 + * @arg @ref LL_RCC_PLLM_DIV_40 + * @arg @ref LL_RCC_PLLM_DIV_41 + * @arg @ref LL_RCC_PLLM_DIV_42 + * @arg @ref LL_RCC_PLLM_DIV_43 + * @arg @ref LL_RCC_PLLM_DIV_44 + * @arg @ref LL_RCC_PLLM_DIV_45 + * @arg @ref LL_RCC_PLLM_DIV_46 + * @arg @ref LL_RCC_PLLM_DIV_47 + * @arg @ref LL_RCC_PLLM_DIV_48 + * @arg @ref LL_RCC_PLLM_DIV_49 + * @arg @ref LL_RCC_PLLM_DIV_50 + * @arg @ref LL_RCC_PLLM_DIV_51 + * @arg @ref LL_RCC_PLLM_DIV_52 + * @arg @ref LL_RCC_PLLM_DIV_53 + * @arg @ref LL_RCC_PLLM_DIV_54 + * @arg @ref LL_RCC_PLLM_DIV_55 + * @arg @ref LL_RCC_PLLM_DIV_56 + * @arg @ref LL_RCC_PLLM_DIV_57 + * @arg @ref LL_RCC_PLLM_DIV_58 + * @arg @ref LL_RCC_PLLM_DIV_59 + * @arg @ref LL_RCC_PLLM_DIV_60 + * @arg @ref LL_RCC_PLLM_DIV_61 + * @arg @ref LL_RCC_PLLM_DIV_62 + * @arg @ref LL_RCC_PLLM_DIV_63 + * @param __PLLN__ Between 50 and 432 + * @param __PLLR__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLR_DIV_2 + * @arg @ref LL_RCC_PLLR_DIV_3 + * @arg @ref LL_RCC_PLLR_DIV_4 + * @arg @ref LL_RCC_PLLR_DIV_5 + * @arg @ref LL_RCC_PLLR_DIV_6 + * @arg @ref LL_RCC_PLLR_DIV_7 + * @param __PLLDIVR__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLDIVR_DIV_1 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_2 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_3 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_4 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_5 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_6 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_7 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_8 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_9 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_10 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_11 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_12 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_13 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_14 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_15 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_16 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_17 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_18 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_19 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_20 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_21 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_22 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_23 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_24 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_25 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_26 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_27 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_28 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_29 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_30 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_31 (*) + * + * (*) value not defined in all devices. + * @retval PLL clock frequency (in Hz) + */ +#if defined(RCC_DCKCFGR_PLLDIVR) +#define __LL_RCC_CALC_PLLCLK_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__, __PLLDIVR__) (((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ + ((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos )) / ((__PLLDIVR__) >> RCC_DCKCFGR_PLLDIVR_Pos )) +#else +#define __LL_RCC_CALC_PLLCLK_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) ((__INPUTFREQ__) / (__PLLM__) * (__PLLN__) / \ + ((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos )) +#endif /* RCC_DCKCFGR_PLLDIVR */ +#endif /* SAI1 */ +#endif /* RCC_PLLCFGR_PLLR */ + +#if defined(RCC_PLLSAI_SUPPORT) +/** + * @brief Helper macro to calculate the PLLSAI frequency used for SAI domain + * @note ex: @ref __LL_RCC_CALC_PLLSAI_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI_GetDivider (), + * @ref LL_RCC_PLLSAI_GetN (), @ref LL_RCC_PLLSAI_GetQ (), @ref LL_RCC_PLLSAI_GetDIVQ ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAIM_DIV_2 + * @arg @ref LL_RCC_PLLSAIM_DIV_3 + * @arg @ref LL_RCC_PLLSAIM_DIV_4 + * @arg @ref LL_RCC_PLLSAIM_DIV_5 + * @arg @ref LL_RCC_PLLSAIM_DIV_6 + * @arg @ref LL_RCC_PLLSAIM_DIV_7 + * @arg @ref LL_RCC_PLLSAIM_DIV_8 + * @arg @ref LL_RCC_PLLSAIM_DIV_9 + * @arg @ref LL_RCC_PLLSAIM_DIV_10 + * @arg @ref LL_RCC_PLLSAIM_DIV_11 + * @arg @ref LL_RCC_PLLSAIM_DIV_12 + * @arg @ref LL_RCC_PLLSAIM_DIV_13 + * @arg @ref LL_RCC_PLLSAIM_DIV_14 + * @arg @ref LL_RCC_PLLSAIM_DIV_15 + * @arg @ref LL_RCC_PLLSAIM_DIV_16 + * @arg @ref LL_RCC_PLLSAIM_DIV_17 + * @arg @ref LL_RCC_PLLSAIM_DIV_18 + * @arg @ref LL_RCC_PLLSAIM_DIV_19 + * @arg @ref LL_RCC_PLLSAIM_DIV_20 + * @arg @ref LL_RCC_PLLSAIM_DIV_21 + * @arg @ref LL_RCC_PLLSAIM_DIV_22 + * @arg @ref LL_RCC_PLLSAIM_DIV_23 + * @arg @ref LL_RCC_PLLSAIM_DIV_24 + * @arg @ref LL_RCC_PLLSAIM_DIV_25 + * @arg @ref LL_RCC_PLLSAIM_DIV_26 + * @arg @ref LL_RCC_PLLSAIM_DIV_27 + * @arg @ref LL_RCC_PLLSAIM_DIV_28 + * @arg @ref LL_RCC_PLLSAIM_DIV_29 + * @arg @ref LL_RCC_PLLSAIM_DIV_30 + * @arg @ref LL_RCC_PLLSAIM_DIV_31 + * @arg @ref LL_RCC_PLLSAIM_DIV_32 + * @arg @ref LL_RCC_PLLSAIM_DIV_33 + * @arg @ref LL_RCC_PLLSAIM_DIV_34 + * @arg @ref LL_RCC_PLLSAIM_DIV_35 + * @arg @ref LL_RCC_PLLSAIM_DIV_36 + * @arg @ref LL_RCC_PLLSAIM_DIV_37 + * @arg @ref LL_RCC_PLLSAIM_DIV_38 + * @arg @ref LL_RCC_PLLSAIM_DIV_39 + * @arg @ref LL_RCC_PLLSAIM_DIV_40 + * @arg @ref LL_RCC_PLLSAIM_DIV_41 + * @arg @ref LL_RCC_PLLSAIM_DIV_42 + * @arg @ref LL_RCC_PLLSAIM_DIV_43 + * @arg @ref LL_RCC_PLLSAIM_DIV_44 + * @arg @ref LL_RCC_PLLSAIM_DIV_45 + * @arg @ref LL_RCC_PLLSAIM_DIV_46 + * @arg @ref LL_RCC_PLLSAIM_DIV_47 + * @arg @ref LL_RCC_PLLSAIM_DIV_48 + * @arg @ref LL_RCC_PLLSAIM_DIV_49 + * @arg @ref LL_RCC_PLLSAIM_DIV_50 + * @arg @ref LL_RCC_PLLSAIM_DIV_51 + * @arg @ref LL_RCC_PLLSAIM_DIV_52 + * @arg @ref LL_RCC_PLLSAIM_DIV_53 + * @arg @ref LL_RCC_PLLSAIM_DIV_54 + * @arg @ref LL_RCC_PLLSAIM_DIV_55 + * @arg @ref LL_RCC_PLLSAIM_DIV_56 + * @arg @ref LL_RCC_PLLSAIM_DIV_57 + * @arg @ref LL_RCC_PLLSAIM_DIV_58 + * @arg @ref LL_RCC_PLLSAIM_DIV_59 + * @arg @ref LL_RCC_PLLSAIM_DIV_60 + * @arg @ref LL_RCC_PLLSAIM_DIV_61 + * @arg @ref LL_RCC_PLLSAIM_DIV_62 + * @arg @ref LL_RCC_PLLSAIM_DIV_63 + * @param __PLLSAIN__ Between 49/50(*) and 432 + * + * (*) value not defined in all devices. + * @param __PLLSAIQ__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAIQ_DIV_2 + * @arg @ref LL_RCC_PLLSAIQ_DIV_3 + * @arg @ref LL_RCC_PLLSAIQ_DIV_4 + * @arg @ref LL_RCC_PLLSAIQ_DIV_5 + * @arg @ref LL_RCC_PLLSAIQ_DIV_6 + * @arg @ref LL_RCC_PLLSAIQ_DIV_7 + * @arg @ref LL_RCC_PLLSAIQ_DIV_8 + * @arg @ref LL_RCC_PLLSAIQ_DIV_9 + * @arg @ref LL_RCC_PLLSAIQ_DIV_10 + * @arg @ref LL_RCC_PLLSAIQ_DIV_11 + * @arg @ref LL_RCC_PLLSAIQ_DIV_12 + * @arg @ref LL_RCC_PLLSAIQ_DIV_13 + * @arg @ref LL_RCC_PLLSAIQ_DIV_14 + * @arg @ref LL_RCC_PLLSAIQ_DIV_15 + * @param __PLLSAIDIVQ__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_1 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_2 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_3 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_4 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_5 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_6 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_7 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_8 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_9 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_10 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_11 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_12 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_13 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_14 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_15 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_16 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_17 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_18 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_19 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_20 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_21 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_22 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_23 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_24 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_25 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_26 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_27 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_28 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_29 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_30 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_31 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_32 + * @retval PLLSAI clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLSAI_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAIN__, __PLLSAIQ__, __PLLSAIDIVQ__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLSAIN__) / \ + (((__PLLSAIQ__) >> RCC_PLLSAICFGR_PLLSAIQ_Pos) * (((__PLLSAIDIVQ__) >> RCC_DCKCFGR_PLLSAIDIVQ_Pos) + 1U))) + +#if defined(RCC_PLLSAICFGR_PLLSAIP) +/** + * @brief Helper macro to calculate the PLLSAI frequency used on 48Mhz domain + * @note ex: @ref __LL_RCC_CALC_PLLSAI_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI_GetDivider (), + * @ref LL_RCC_PLLSAI_GetN (), @ref LL_RCC_PLLSAI_GetP ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAIM_DIV_2 + * @arg @ref LL_RCC_PLLSAIM_DIV_3 + * @arg @ref LL_RCC_PLLSAIM_DIV_4 + * @arg @ref LL_RCC_PLLSAIM_DIV_5 + * @arg @ref LL_RCC_PLLSAIM_DIV_6 + * @arg @ref LL_RCC_PLLSAIM_DIV_7 + * @arg @ref LL_RCC_PLLSAIM_DIV_8 + * @arg @ref LL_RCC_PLLSAIM_DIV_9 + * @arg @ref LL_RCC_PLLSAIM_DIV_10 + * @arg @ref LL_RCC_PLLSAIM_DIV_11 + * @arg @ref LL_RCC_PLLSAIM_DIV_12 + * @arg @ref LL_RCC_PLLSAIM_DIV_13 + * @arg @ref LL_RCC_PLLSAIM_DIV_14 + * @arg @ref LL_RCC_PLLSAIM_DIV_15 + * @arg @ref LL_RCC_PLLSAIM_DIV_16 + * @arg @ref LL_RCC_PLLSAIM_DIV_17 + * @arg @ref LL_RCC_PLLSAIM_DIV_18 + * @arg @ref LL_RCC_PLLSAIM_DIV_19 + * @arg @ref LL_RCC_PLLSAIM_DIV_20 + * @arg @ref LL_RCC_PLLSAIM_DIV_21 + * @arg @ref LL_RCC_PLLSAIM_DIV_22 + * @arg @ref LL_RCC_PLLSAIM_DIV_23 + * @arg @ref LL_RCC_PLLSAIM_DIV_24 + * @arg @ref LL_RCC_PLLSAIM_DIV_25 + * @arg @ref LL_RCC_PLLSAIM_DIV_26 + * @arg @ref LL_RCC_PLLSAIM_DIV_27 + * @arg @ref LL_RCC_PLLSAIM_DIV_28 + * @arg @ref LL_RCC_PLLSAIM_DIV_29 + * @arg @ref LL_RCC_PLLSAIM_DIV_30 + * @arg @ref LL_RCC_PLLSAIM_DIV_31 + * @arg @ref LL_RCC_PLLSAIM_DIV_32 + * @arg @ref LL_RCC_PLLSAIM_DIV_33 + * @arg @ref LL_RCC_PLLSAIM_DIV_34 + * @arg @ref LL_RCC_PLLSAIM_DIV_35 + * @arg @ref LL_RCC_PLLSAIM_DIV_36 + * @arg @ref LL_RCC_PLLSAIM_DIV_37 + * @arg @ref LL_RCC_PLLSAIM_DIV_38 + * @arg @ref LL_RCC_PLLSAIM_DIV_39 + * @arg @ref LL_RCC_PLLSAIM_DIV_40 + * @arg @ref LL_RCC_PLLSAIM_DIV_41 + * @arg @ref LL_RCC_PLLSAIM_DIV_42 + * @arg @ref LL_RCC_PLLSAIM_DIV_43 + * @arg @ref LL_RCC_PLLSAIM_DIV_44 + * @arg @ref LL_RCC_PLLSAIM_DIV_45 + * @arg @ref LL_RCC_PLLSAIM_DIV_46 + * @arg @ref LL_RCC_PLLSAIM_DIV_47 + * @arg @ref LL_RCC_PLLSAIM_DIV_48 + * @arg @ref LL_RCC_PLLSAIM_DIV_49 + * @arg @ref LL_RCC_PLLSAIM_DIV_50 + * @arg @ref LL_RCC_PLLSAIM_DIV_51 + * @arg @ref LL_RCC_PLLSAIM_DIV_52 + * @arg @ref LL_RCC_PLLSAIM_DIV_53 + * @arg @ref LL_RCC_PLLSAIM_DIV_54 + * @arg @ref LL_RCC_PLLSAIM_DIV_55 + * @arg @ref LL_RCC_PLLSAIM_DIV_56 + * @arg @ref LL_RCC_PLLSAIM_DIV_57 + * @arg @ref LL_RCC_PLLSAIM_DIV_58 + * @arg @ref LL_RCC_PLLSAIM_DIV_59 + * @arg @ref LL_RCC_PLLSAIM_DIV_60 + * @arg @ref LL_RCC_PLLSAIM_DIV_61 + * @arg @ref LL_RCC_PLLSAIM_DIV_62 + * @arg @ref LL_RCC_PLLSAIM_DIV_63 + * @param __PLLSAIN__ Between 50 and 432 + * @param __PLLSAIP__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAIP_DIV_2 + * @arg @ref LL_RCC_PLLSAIP_DIV_4 + * @arg @ref LL_RCC_PLLSAIP_DIV_6 + * @arg @ref LL_RCC_PLLSAIP_DIV_8 + * @retval PLLSAI clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLSAI_48M_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAIN__, __PLLSAIP__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLSAIN__) / \ + ((((__PLLSAIP__) >> RCC_PLLSAICFGR_PLLSAIP_Pos) + 1U) * 2U)) +#endif /* RCC_PLLSAICFGR_PLLSAIP */ + +#if defined(LTDC) +/** + * @brief Helper macro to calculate the PLLSAI frequency used for LTDC domain + * @note ex: @ref __LL_RCC_CALC_PLLSAI_LTDC_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI_GetDivider (), + * @ref LL_RCC_PLLSAI_GetN (), @ref LL_RCC_PLLSAI_GetR (), @ref LL_RCC_PLLSAI_GetDIVR ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAIM_DIV_2 + * @arg @ref LL_RCC_PLLSAIM_DIV_3 + * @arg @ref LL_RCC_PLLSAIM_DIV_4 + * @arg @ref LL_RCC_PLLSAIM_DIV_5 + * @arg @ref LL_RCC_PLLSAIM_DIV_6 + * @arg @ref LL_RCC_PLLSAIM_DIV_7 + * @arg @ref LL_RCC_PLLSAIM_DIV_8 + * @arg @ref LL_RCC_PLLSAIM_DIV_9 + * @arg @ref LL_RCC_PLLSAIM_DIV_10 + * @arg @ref LL_RCC_PLLSAIM_DIV_11 + * @arg @ref LL_RCC_PLLSAIM_DIV_12 + * @arg @ref LL_RCC_PLLSAIM_DIV_13 + * @arg @ref LL_RCC_PLLSAIM_DIV_14 + * @arg @ref LL_RCC_PLLSAIM_DIV_15 + * @arg @ref LL_RCC_PLLSAIM_DIV_16 + * @arg @ref LL_RCC_PLLSAIM_DIV_17 + * @arg @ref LL_RCC_PLLSAIM_DIV_18 + * @arg @ref LL_RCC_PLLSAIM_DIV_19 + * @arg @ref LL_RCC_PLLSAIM_DIV_20 + * @arg @ref LL_RCC_PLLSAIM_DIV_21 + * @arg @ref LL_RCC_PLLSAIM_DIV_22 + * @arg @ref LL_RCC_PLLSAIM_DIV_23 + * @arg @ref LL_RCC_PLLSAIM_DIV_24 + * @arg @ref LL_RCC_PLLSAIM_DIV_25 + * @arg @ref LL_RCC_PLLSAIM_DIV_26 + * @arg @ref LL_RCC_PLLSAIM_DIV_27 + * @arg @ref LL_RCC_PLLSAIM_DIV_28 + * @arg @ref LL_RCC_PLLSAIM_DIV_29 + * @arg @ref LL_RCC_PLLSAIM_DIV_30 + * @arg @ref LL_RCC_PLLSAIM_DIV_31 + * @arg @ref LL_RCC_PLLSAIM_DIV_32 + * @arg @ref LL_RCC_PLLSAIM_DIV_33 + * @arg @ref LL_RCC_PLLSAIM_DIV_34 + * @arg @ref LL_RCC_PLLSAIM_DIV_35 + * @arg @ref LL_RCC_PLLSAIM_DIV_36 + * @arg @ref LL_RCC_PLLSAIM_DIV_37 + * @arg @ref LL_RCC_PLLSAIM_DIV_38 + * @arg @ref LL_RCC_PLLSAIM_DIV_39 + * @arg @ref LL_RCC_PLLSAIM_DIV_40 + * @arg @ref LL_RCC_PLLSAIM_DIV_41 + * @arg @ref LL_RCC_PLLSAIM_DIV_42 + * @arg @ref LL_RCC_PLLSAIM_DIV_43 + * @arg @ref LL_RCC_PLLSAIM_DIV_44 + * @arg @ref LL_RCC_PLLSAIM_DIV_45 + * @arg @ref LL_RCC_PLLSAIM_DIV_46 + * @arg @ref LL_RCC_PLLSAIM_DIV_47 + * @arg @ref LL_RCC_PLLSAIM_DIV_48 + * @arg @ref LL_RCC_PLLSAIM_DIV_49 + * @arg @ref LL_RCC_PLLSAIM_DIV_50 + * @arg @ref LL_RCC_PLLSAIM_DIV_51 + * @arg @ref LL_RCC_PLLSAIM_DIV_52 + * @arg @ref LL_RCC_PLLSAIM_DIV_53 + * @arg @ref LL_RCC_PLLSAIM_DIV_54 + * @arg @ref LL_RCC_PLLSAIM_DIV_55 + * @arg @ref LL_RCC_PLLSAIM_DIV_56 + * @arg @ref LL_RCC_PLLSAIM_DIV_57 + * @arg @ref LL_RCC_PLLSAIM_DIV_58 + * @arg @ref LL_RCC_PLLSAIM_DIV_59 + * @arg @ref LL_RCC_PLLSAIM_DIV_60 + * @arg @ref LL_RCC_PLLSAIM_DIV_61 + * @arg @ref LL_RCC_PLLSAIM_DIV_62 + * @arg @ref LL_RCC_PLLSAIM_DIV_63 + * @param __PLLSAIN__ Between 49/50(*) and 432 + * + * (*) value not defined in all devices. + * @param __PLLSAIR__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAIR_DIV_2 + * @arg @ref LL_RCC_PLLSAIR_DIV_3 + * @arg @ref LL_RCC_PLLSAIR_DIV_4 + * @arg @ref LL_RCC_PLLSAIR_DIV_5 + * @arg @ref LL_RCC_PLLSAIR_DIV_6 + * @arg @ref LL_RCC_PLLSAIR_DIV_7 + * @param __PLLSAIDIVR__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAIDIVR_DIV_2 + * @arg @ref LL_RCC_PLLSAIDIVR_DIV_4 + * @arg @ref LL_RCC_PLLSAIDIVR_DIV_8 + * @arg @ref LL_RCC_PLLSAIDIVR_DIV_16 + * @retval PLLSAI clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLSAI_LTDC_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAIN__, __PLLSAIR__, __PLLSAIDIVR__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLSAIN__) / \ + (((__PLLSAIR__) >> RCC_PLLSAICFGR_PLLSAIR_Pos) * (aRCC_PLLSAIDIVRPrescTable[(__PLLSAIDIVR__) >> RCC_DCKCFGR_PLLSAIDIVR_Pos]))) +#endif /* LTDC */ +#endif /* RCC_PLLSAI_SUPPORT */ + +#if defined(RCC_PLLI2S_SUPPORT) +#if defined(RCC_DCKCFGR_PLLI2SDIVQ) || defined(RCC_DCKCFGR_PLLI2SDIVR) +/** + * @brief Helper macro to calculate the PLLI2S frequency used for SAI domain + * @note ex: @ref __LL_RCC_CALC_PLLI2S_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLLI2S_GetDivider (), + * @ref LL_RCC_PLLI2S_GetN (), @ref LL_RCC_PLLI2S_GetQ (), @ref LL_RCC_PLLI2S_GetDIVQ ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLI2SM_DIV_2 + * @arg @ref LL_RCC_PLLI2SM_DIV_3 + * @arg @ref LL_RCC_PLLI2SM_DIV_4 + * @arg @ref LL_RCC_PLLI2SM_DIV_5 + * @arg @ref LL_RCC_PLLI2SM_DIV_6 + * @arg @ref LL_RCC_PLLI2SM_DIV_7 + * @arg @ref LL_RCC_PLLI2SM_DIV_8 + * @arg @ref LL_RCC_PLLI2SM_DIV_9 + * @arg @ref LL_RCC_PLLI2SM_DIV_10 + * @arg @ref LL_RCC_PLLI2SM_DIV_11 + * @arg @ref LL_RCC_PLLI2SM_DIV_12 + * @arg @ref LL_RCC_PLLI2SM_DIV_13 + * @arg @ref LL_RCC_PLLI2SM_DIV_14 + * @arg @ref LL_RCC_PLLI2SM_DIV_15 + * @arg @ref LL_RCC_PLLI2SM_DIV_16 + * @arg @ref LL_RCC_PLLI2SM_DIV_17 + * @arg @ref LL_RCC_PLLI2SM_DIV_18 + * @arg @ref LL_RCC_PLLI2SM_DIV_19 + * @arg @ref LL_RCC_PLLI2SM_DIV_20 + * @arg @ref LL_RCC_PLLI2SM_DIV_21 + * @arg @ref LL_RCC_PLLI2SM_DIV_22 + * @arg @ref LL_RCC_PLLI2SM_DIV_23 + * @arg @ref LL_RCC_PLLI2SM_DIV_24 + * @arg @ref LL_RCC_PLLI2SM_DIV_25 + * @arg @ref LL_RCC_PLLI2SM_DIV_26 + * @arg @ref LL_RCC_PLLI2SM_DIV_27 + * @arg @ref LL_RCC_PLLI2SM_DIV_28 + * @arg @ref LL_RCC_PLLI2SM_DIV_29 + * @arg @ref LL_RCC_PLLI2SM_DIV_30 + * @arg @ref LL_RCC_PLLI2SM_DIV_31 + * @arg @ref LL_RCC_PLLI2SM_DIV_32 + * @arg @ref LL_RCC_PLLI2SM_DIV_33 + * @arg @ref LL_RCC_PLLI2SM_DIV_34 + * @arg @ref LL_RCC_PLLI2SM_DIV_35 + * @arg @ref LL_RCC_PLLI2SM_DIV_36 + * @arg @ref LL_RCC_PLLI2SM_DIV_37 + * @arg @ref LL_RCC_PLLI2SM_DIV_38 + * @arg @ref LL_RCC_PLLI2SM_DIV_39 + * @arg @ref LL_RCC_PLLI2SM_DIV_40 + * @arg @ref LL_RCC_PLLI2SM_DIV_41 + * @arg @ref LL_RCC_PLLI2SM_DIV_42 + * @arg @ref LL_RCC_PLLI2SM_DIV_43 + * @arg @ref LL_RCC_PLLI2SM_DIV_44 + * @arg @ref LL_RCC_PLLI2SM_DIV_45 + * @arg @ref LL_RCC_PLLI2SM_DIV_46 + * @arg @ref LL_RCC_PLLI2SM_DIV_47 + * @arg @ref LL_RCC_PLLI2SM_DIV_48 + * @arg @ref LL_RCC_PLLI2SM_DIV_49 + * @arg @ref LL_RCC_PLLI2SM_DIV_50 + * @arg @ref LL_RCC_PLLI2SM_DIV_51 + * @arg @ref LL_RCC_PLLI2SM_DIV_52 + * @arg @ref LL_RCC_PLLI2SM_DIV_53 + * @arg @ref LL_RCC_PLLI2SM_DIV_54 + * @arg @ref LL_RCC_PLLI2SM_DIV_55 + * @arg @ref LL_RCC_PLLI2SM_DIV_56 + * @arg @ref LL_RCC_PLLI2SM_DIV_57 + * @arg @ref LL_RCC_PLLI2SM_DIV_58 + * @arg @ref LL_RCC_PLLI2SM_DIV_59 + * @arg @ref LL_RCC_PLLI2SM_DIV_60 + * @arg @ref LL_RCC_PLLI2SM_DIV_61 + * @arg @ref LL_RCC_PLLI2SM_DIV_62 + * @arg @ref LL_RCC_PLLI2SM_DIV_63 + * @param __PLLI2SN__ Between 50/192(*) and 432 + * + * (*) value not defined in all devices. + * @param __PLLI2SQ_R__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLI2SQ_DIV_2 (*) + * @arg @ref LL_RCC_PLLI2SQ_DIV_3 (*) + * @arg @ref LL_RCC_PLLI2SQ_DIV_4 (*) + * @arg @ref LL_RCC_PLLI2SQ_DIV_5 (*) + * @arg @ref LL_RCC_PLLI2SQ_DIV_6 (*) + * @arg @ref LL_RCC_PLLI2SQ_DIV_7 (*) + * @arg @ref LL_RCC_PLLI2SQ_DIV_8 (*) + * @arg @ref LL_RCC_PLLI2SQ_DIV_9 (*) + * @arg @ref LL_RCC_PLLI2SQ_DIV_10 (*) + * @arg @ref LL_RCC_PLLI2SQ_DIV_11 (*) + * @arg @ref LL_RCC_PLLI2SQ_DIV_12 (*) + * @arg @ref LL_RCC_PLLI2SQ_DIV_13 (*) + * @arg @ref LL_RCC_PLLI2SQ_DIV_14 (*) + * @arg @ref LL_RCC_PLLI2SQ_DIV_15 (*) + * @arg @ref LL_RCC_PLLI2SR_DIV_2 (*) + * @arg @ref LL_RCC_PLLI2SR_DIV_3 (*) + * @arg @ref LL_RCC_PLLI2SR_DIV_4 (*) + * @arg @ref LL_RCC_PLLI2SR_DIV_5 (*) + * @arg @ref LL_RCC_PLLI2SR_DIV_6 (*) + * @arg @ref LL_RCC_PLLI2SR_DIV_7 (*) + * + * (*) value not defined in all devices. + * @param __PLLI2SDIVQ_R__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_1 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_2 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_3 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_4 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_5 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_6 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_7 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_8 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_9 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_10 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_11 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_12 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_13 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_14 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_15 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_16 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_17 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_18 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_19 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_20 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_21 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_22 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_23 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_24 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_25 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_26 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_27 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_28 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_29 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_30 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_31 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_32 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_1 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_2 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_3 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_4 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_5 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_6 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_7 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_8 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_9 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_10 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_11 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_12 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_13 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_14 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_15 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_16 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_17 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_18 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_19 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_20 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_21 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_22 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_23 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_24 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_25 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_26 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_27 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_28 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_29 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_30 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_31 (*) + * + * (*) value not defined in all devices. + * @retval PLLI2S clock frequency (in Hz) + */ +#if defined(RCC_DCKCFGR_PLLI2SDIVQ) +#define __LL_RCC_CALC_PLLI2S_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLI2SN__, __PLLI2SQ_R__, __PLLI2SDIVQ_R__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLI2SN__) / \ + (((__PLLI2SQ_R__) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos) * (((__PLLI2SDIVQ_R__) >> RCC_DCKCFGR_PLLI2SDIVQ_Pos) + 1U))) +#else +#define __LL_RCC_CALC_PLLI2S_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLI2SN__, __PLLI2SQ_R__, __PLLI2SDIVQ_R__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLI2SN__) / \ + (((__PLLI2SQ_R__) >> RCC_PLLI2SCFGR_PLLI2SR_Pos) * ((__PLLI2SDIVQ_R__) >> RCC_DCKCFGR_PLLI2SDIVR_Pos))) + +#endif /* RCC_DCKCFGR_PLLI2SDIVQ */ +#endif /* RCC_DCKCFGR_PLLI2SDIVQ || RCC_DCKCFGR_PLLI2SDIVR */ + +#if defined(SPDIFRX) +/** + * @brief Helper macro to calculate the PLLI2S frequency used on SPDIFRX domain + * @note ex: @ref __LL_RCC_CALC_PLLI2S_SPDIFRX_FREQ (HSE_VALUE,@ref LL_RCC_PLLI2S_GetDivider (), + * @ref LL_RCC_PLLI2S_GetN (), @ref LL_RCC_PLLI2S_GetP ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLI2SM_DIV_2 + * @arg @ref LL_RCC_PLLI2SM_DIV_3 + * @arg @ref LL_RCC_PLLI2SM_DIV_4 + * @arg @ref LL_RCC_PLLI2SM_DIV_5 + * @arg @ref LL_RCC_PLLI2SM_DIV_6 + * @arg @ref LL_RCC_PLLI2SM_DIV_7 + * @arg @ref LL_RCC_PLLI2SM_DIV_8 + * @arg @ref LL_RCC_PLLI2SM_DIV_9 + * @arg @ref LL_RCC_PLLI2SM_DIV_10 + * @arg @ref LL_RCC_PLLI2SM_DIV_11 + * @arg @ref LL_RCC_PLLI2SM_DIV_12 + * @arg @ref LL_RCC_PLLI2SM_DIV_13 + * @arg @ref LL_RCC_PLLI2SM_DIV_14 + * @arg @ref LL_RCC_PLLI2SM_DIV_15 + * @arg @ref LL_RCC_PLLI2SM_DIV_16 + * @arg @ref LL_RCC_PLLI2SM_DIV_17 + * @arg @ref LL_RCC_PLLI2SM_DIV_18 + * @arg @ref LL_RCC_PLLI2SM_DIV_19 + * @arg @ref LL_RCC_PLLI2SM_DIV_20 + * @arg @ref LL_RCC_PLLI2SM_DIV_21 + * @arg @ref LL_RCC_PLLI2SM_DIV_22 + * @arg @ref LL_RCC_PLLI2SM_DIV_23 + * @arg @ref LL_RCC_PLLI2SM_DIV_24 + * @arg @ref LL_RCC_PLLI2SM_DIV_25 + * @arg @ref LL_RCC_PLLI2SM_DIV_26 + * @arg @ref LL_RCC_PLLI2SM_DIV_27 + * @arg @ref LL_RCC_PLLI2SM_DIV_28 + * @arg @ref LL_RCC_PLLI2SM_DIV_29 + * @arg @ref LL_RCC_PLLI2SM_DIV_30 + * @arg @ref LL_RCC_PLLI2SM_DIV_31 + * @arg @ref LL_RCC_PLLI2SM_DIV_32 + * @arg @ref LL_RCC_PLLI2SM_DIV_33 + * @arg @ref LL_RCC_PLLI2SM_DIV_34 + * @arg @ref LL_RCC_PLLI2SM_DIV_35 + * @arg @ref LL_RCC_PLLI2SM_DIV_36 + * @arg @ref LL_RCC_PLLI2SM_DIV_37 + * @arg @ref LL_RCC_PLLI2SM_DIV_38 + * @arg @ref LL_RCC_PLLI2SM_DIV_39 + * @arg @ref LL_RCC_PLLI2SM_DIV_40 + * @arg @ref LL_RCC_PLLI2SM_DIV_41 + * @arg @ref LL_RCC_PLLI2SM_DIV_42 + * @arg @ref LL_RCC_PLLI2SM_DIV_43 + * @arg @ref LL_RCC_PLLI2SM_DIV_44 + * @arg @ref LL_RCC_PLLI2SM_DIV_45 + * @arg @ref LL_RCC_PLLI2SM_DIV_46 + * @arg @ref LL_RCC_PLLI2SM_DIV_47 + * @arg @ref LL_RCC_PLLI2SM_DIV_48 + * @arg @ref LL_RCC_PLLI2SM_DIV_49 + * @arg @ref LL_RCC_PLLI2SM_DIV_50 + * @arg @ref LL_RCC_PLLI2SM_DIV_51 + * @arg @ref LL_RCC_PLLI2SM_DIV_52 + * @arg @ref LL_RCC_PLLI2SM_DIV_53 + * @arg @ref LL_RCC_PLLI2SM_DIV_54 + * @arg @ref LL_RCC_PLLI2SM_DIV_55 + * @arg @ref LL_RCC_PLLI2SM_DIV_56 + * @arg @ref LL_RCC_PLLI2SM_DIV_57 + * @arg @ref LL_RCC_PLLI2SM_DIV_58 + * @arg @ref LL_RCC_PLLI2SM_DIV_59 + * @arg @ref LL_RCC_PLLI2SM_DIV_60 + * @arg @ref LL_RCC_PLLI2SM_DIV_61 + * @arg @ref LL_RCC_PLLI2SM_DIV_62 + * @arg @ref LL_RCC_PLLI2SM_DIV_63 + * @param __PLLI2SN__ Between 50 and 432 + * @param __PLLI2SP__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLI2SP_DIV_2 + * @arg @ref LL_RCC_PLLI2SP_DIV_4 + * @arg @ref LL_RCC_PLLI2SP_DIV_6 + * @arg @ref LL_RCC_PLLI2SP_DIV_8 + * @retval PLLI2S clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLI2S_SPDIFRX_FREQ(__INPUTFREQ__, __PLLM__, __PLLI2SN__, __PLLI2SP__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLI2SN__) / \ + ((((__PLLI2SP__) >> RCC_PLLI2SCFGR_PLLI2SP_Pos) + 1U) * 2U)) + +#endif /* SPDIFRX */ + +/** + * @brief Helper macro to calculate the PLLI2S frequency used for I2S domain + * @note ex: @ref __LL_RCC_CALC_PLLI2S_I2S_FREQ (HSE_VALUE,@ref LL_RCC_PLLI2S_GetDivider (), + * @ref LL_RCC_PLLI2S_GetN (), @ref LL_RCC_PLLI2S_GetR ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLI2SM_DIV_2 + * @arg @ref LL_RCC_PLLI2SM_DIV_3 + * @arg @ref LL_RCC_PLLI2SM_DIV_4 + * @arg @ref LL_RCC_PLLI2SM_DIV_5 + * @arg @ref LL_RCC_PLLI2SM_DIV_6 + * @arg @ref LL_RCC_PLLI2SM_DIV_7 + * @arg @ref LL_RCC_PLLI2SM_DIV_8 + * @arg @ref LL_RCC_PLLI2SM_DIV_9 + * @arg @ref LL_RCC_PLLI2SM_DIV_10 + * @arg @ref LL_RCC_PLLI2SM_DIV_11 + * @arg @ref LL_RCC_PLLI2SM_DIV_12 + * @arg @ref LL_RCC_PLLI2SM_DIV_13 + * @arg @ref LL_RCC_PLLI2SM_DIV_14 + * @arg @ref LL_RCC_PLLI2SM_DIV_15 + * @arg @ref LL_RCC_PLLI2SM_DIV_16 + * @arg @ref LL_RCC_PLLI2SM_DIV_17 + * @arg @ref LL_RCC_PLLI2SM_DIV_18 + * @arg @ref LL_RCC_PLLI2SM_DIV_19 + * @arg @ref LL_RCC_PLLI2SM_DIV_20 + * @arg @ref LL_RCC_PLLI2SM_DIV_21 + * @arg @ref LL_RCC_PLLI2SM_DIV_22 + * @arg @ref LL_RCC_PLLI2SM_DIV_23 + * @arg @ref LL_RCC_PLLI2SM_DIV_24 + * @arg @ref LL_RCC_PLLI2SM_DIV_25 + * @arg @ref LL_RCC_PLLI2SM_DIV_26 + * @arg @ref LL_RCC_PLLI2SM_DIV_27 + * @arg @ref LL_RCC_PLLI2SM_DIV_28 + * @arg @ref LL_RCC_PLLI2SM_DIV_29 + * @arg @ref LL_RCC_PLLI2SM_DIV_30 + * @arg @ref LL_RCC_PLLI2SM_DIV_31 + * @arg @ref LL_RCC_PLLI2SM_DIV_32 + * @arg @ref LL_RCC_PLLI2SM_DIV_33 + * @arg @ref LL_RCC_PLLI2SM_DIV_34 + * @arg @ref LL_RCC_PLLI2SM_DIV_35 + * @arg @ref LL_RCC_PLLI2SM_DIV_36 + * @arg @ref LL_RCC_PLLI2SM_DIV_37 + * @arg @ref LL_RCC_PLLI2SM_DIV_38 + * @arg @ref LL_RCC_PLLI2SM_DIV_39 + * @arg @ref LL_RCC_PLLI2SM_DIV_40 + * @arg @ref LL_RCC_PLLI2SM_DIV_41 + * @arg @ref LL_RCC_PLLI2SM_DIV_42 + * @arg @ref LL_RCC_PLLI2SM_DIV_43 + * @arg @ref LL_RCC_PLLI2SM_DIV_44 + * @arg @ref LL_RCC_PLLI2SM_DIV_45 + * @arg @ref LL_RCC_PLLI2SM_DIV_46 + * @arg @ref LL_RCC_PLLI2SM_DIV_47 + * @arg @ref LL_RCC_PLLI2SM_DIV_48 + * @arg @ref LL_RCC_PLLI2SM_DIV_49 + * @arg @ref LL_RCC_PLLI2SM_DIV_50 + * @arg @ref LL_RCC_PLLI2SM_DIV_51 + * @arg @ref LL_RCC_PLLI2SM_DIV_52 + * @arg @ref LL_RCC_PLLI2SM_DIV_53 + * @arg @ref LL_RCC_PLLI2SM_DIV_54 + * @arg @ref LL_RCC_PLLI2SM_DIV_55 + * @arg @ref LL_RCC_PLLI2SM_DIV_56 + * @arg @ref LL_RCC_PLLI2SM_DIV_57 + * @arg @ref LL_RCC_PLLI2SM_DIV_58 + * @arg @ref LL_RCC_PLLI2SM_DIV_59 + * @arg @ref LL_RCC_PLLI2SM_DIV_60 + * @arg @ref LL_RCC_PLLI2SM_DIV_61 + * @arg @ref LL_RCC_PLLI2SM_DIV_62 + * @arg @ref LL_RCC_PLLI2SM_DIV_63 + * @param __PLLI2SN__ Between 50/192(*) and 432 + * + * (*) value not defined in all devices. + * @param __PLLI2SR__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLI2SR_DIV_2 + * @arg @ref LL_RCC_PLLI2SR_DIV_3 + * @arg @ref LL_RCC_PLLI2SR_DIV_4 + * @arg @ref LL_RCC_PLLI2SR_DIV_5 + * @arg @ref LL_RCC_PLLI2SR_DIV_6 + * @arg @ref LL_RCC_PLLI2SR_DIV_7 + * @retval PLLI2S clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLI2S_I2S_FREQ(__INPUTFREQ__, __PLLM__, __PLLI2SN__, __PLLI2SR__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLI2SN__) / \ + ((__PLLI2SR__) >> RCC_PLLI2SCFGR_PLLI2SR_Pos)) + +#if defined(RCC_PLLI2SCFGR_PLLI2SQ) && !defined(RCC_DCKCFGR_PLLI2SDIVQ) +/** + * @brief Helper macro to calculate the PLLI2S frequency used for 48Mhz domain + * @note ex: @ref __LL_RCC_CALC_PLLI2S_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLLI2S_GetDivider (), + * @ref LL_RCC_PLLI2S_GetN (), @ref LL_RCC_PLLI2S_GetQ ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLI2SM_DIV_2 + * @arg @ref LL_RCC_PLLI2SM_DIV_3 + * @arg @ref LL_RCC_PLLI2SM_DIV_4 + * @arg @ref LL_RCC_PLLI2SM_DIV_5 + * @arg @ref LL_RCC_PLLI2SM_DIV_6 + * @arg @ref LL_RCC_PLLI2SM_DIV_7 + * @arg @ref LL_RCC_PLLI2SM_DIV_8 + * @arg @ref LL_RCC_PLLI2SM_DIV_9 + * @arg @ref LL_RCC_PLLI2SM_DIV_10 + * @arg @ref LL_RCC_PLLI2SM_DIV_11 + * @arg @ref LL_RCC_PLLI2SM_DIV_12 + * @arg @ref LL_RCC_PLLI2SM_DIV_13 + * @arg @ref LL_RCC_PLLI2SM_DIV_14 + * @arg @ref LL_RCC_PLLI2SM_DIV_15 + * @arg @ref LL_RCC_PLLI2SM_DIV_16 + * @arg @ref LL_RCC_PLLI2SM_DIV_17 + * @arg @ref LL_RCC_PLLI2SM_DIV_18 + * @arg @ref LL_RCC_PLLI2SM_DIV_19 + * @arg @ref LL_RCC_PLLI2SM_DIV_20 + * @arg @ref LL_RCC_PLLI2SM_DIV_21 + * @arg @ref LL_RCC_PLLI2SM_DIV_22 + * @arg @ref LL_RCC_PLLI2SM_DIV_23 + * @arg @ref LL_RCC_PLLI2SM_DIV_24 + * @arg @ref LL_RCC_PLLI2SM_DIV_25 + * @arg @ref LL_RCC_PLLI2SM_DIV_26 + * @arg @ref LL_RCC_PLLI2SM_DIV_27 + * @arg @ref LL_RCC_PLLI2SM_DIV_28 + * @arg @ref LL_RCC_PLLI2SM_DIV_29 + * @arg @ref LL_RCC_PLLI2SM_DIV_30 + * @arg @ref LL_RCC_PLLI2SM_DIV_31 + * @arg @ref LL_RCC_PLLI2SM_DIV_32 + * @arg @ref LL_RCC_PLLI2SM_DIV_33 + * @arg @ref LL_RCC_PLLI2SM_DIV_34 + * @arg @ref LL_RCC_PLLI2SM_DIV_35 + * @arg @ref LL_RCC_PLLI2SM_DIV_36 + * @arg @ref LL_RCC_PLLI2SM_DIV_37 + * @arg @ref LL_RCC_PLLI2SM_DIV_38 + * @arg @ref LL_RCC_PLLI2SM_DIV_39 + * @arg @ref LL_RCC_PLLI2SM_DIV_40 + * @arg @ref LL_RCC_PLLI2SM_DIV_41 + * @arg @ref LL_RCC_PLLI2SM_DIV_42 + * @arg @ref LL_RCC_PLLI2SM_DIV_43 + * @arg @ref LL_RCC_PLLI2SM_DIV_44 + * @arg @ref LL_RCC_PLLI2SM_DIV_45 + * @arg @ref LL_RCC_PLLI2SM_DIV_46 + * @arg @ref LL_RCC_PLLI2SM_DIV_47 + * @arg @ref LL_RCC_PLLI2SM_DIV_48 + * @arg @ref LL_RCC_PLLI2SM_DIV_49 + * @arg @ref LL_RCC_PLLI2SM_DIV_50 + * @arg @ref LL_RCC_PLLI2SM_DIV_51 + * @arg @ref LL_RCC_PLLI2SM_DIV_52 + * @arg @ref LL_RCC_PLLI2SM_DIV_53 + * @arg @ref LL_RCC_PLLI2SM_DIV_54 + * @arg @ref LL_RCC_PLLI2SM_DIV_55 + * @arg @ref LL_RCC_PLLI2SM_DIV_56 + * @arg @ref LL_RCC_PLLI2SM_DIV_57 + * @arg @ref LL_RCC_PLLI2SM_DIV_58 + * @arg @ref LL_RCC_PLLI2SM_DIV_59 + * @arg @ref LL_RCC_PLLI2SM_DIV_60 + * @arg @ref LL_RCC_PLLI2SM_DIV_61 + * @arg @ref LL_RCC_PLLI2SM_DIV_62 + * @arg @ref LL_RCC_PLLI2SM_DIV_63 + * @param __PLLI2SN__ Between 50 and 432 + * @param __PLLI2SQ__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLI2SQ_DIV_2 + * @arg @ref LL_RCC_PLLI2SQ_DIV_3 + * @arg @ref LL_RCC_PLLI2SQ_DIV_4 + * @arg @ref LL_RCC_PLLI2SQ_DIV_5 + * @arg @ref LL_RCC_PLLI2SQ_DIV_6 + * @arg @ref LL_RCC_PLLI2SQ_DIV_7 + * @arg @ref LL_RCC_PLLI2SQ_DIV_8 + * @arg @ref LL_RCC_PLLI2SQ_DIV_9 + * @arg @ref LL_RCC_PLLI2SQ_DIV_10 + * @arg @ref LL_RCC_PLLI2SQ_DIV_11 + * @arg @ref LL_RCC_PLLI2SQ_DIV_12 + * @arg @ref LL_RCC_PLLI2SQ_DIV_13 + * @arg @ref LL_RCC_PLLI2SQ_DIV_14 + * @arg @ref LL_RCC_PLLI2SQ_DIV_15 + * @retval PLLI2S clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLI2S_48M_FREQ(__INPUTFREQ__, __PLLM__, __PLLI2SN__, __PLLI2SQ__) (((__INPUTFREQ__) / (__PLLM__)) * (__PLLI2SN__) / \ + ((__PLLI2SQ__) >> RCC_PLLI2SCFGR_PLLI2SQ_Pos)) + +#endif /* RCC_PLLI2SCFGR_PLLI2SQ && !RCC_DCKCFGR_PLLI2SDIVQ */ +#endif /* RCC_PLLI2S_SUPPORT */ + +/** + * @brief Helper macro to calculate the HCLK frequency + * @param __SYSCLKFREQ__ SYSCLK frequency (based on HSE/HSI/PLLCLK) + * @param __AHBPRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + * @retval HCLK clock frequency (in Hz) + */ +#define __LL_RCC_CALC_HCLK_FREQ(__SYSCLKFREQ__, __AHBPRESCALER__) ((__SYSCLKFREQ__) >> AHBPrescTable[((__AHBPRESCALER__) & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos]) + +/** + * @brief Helper macro to calculate the PCLK1 frequency (ABP1) + * @param __HCLKFREQ__ HCLK frequency + * @param __APB1PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + * @retval PCLK1 clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PCLK1_FREQ(__HCLKFREQ__, __APB1PRESCALER__) ((__HCLKFREQ__) >> APBPrescTable[(__APB1PRESCALER__) >> RCC_CFGR_PPRE1_Pos]) + +/** + * @brief Helper macro to calculate the PCLK2 frequency (ABP2) + * @param __HCLKFREQ__ HCLK frequency + * @param __APB2PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_APB2_DIV_1 + * @arg @ref LL_RCC_APB2_DIV_2 + * @arg @ref LL_RCC_APB2_DIV_4 + * @arg @ref LL_RCC_APB2_DIV_8 + * @arg @ref LL_RCC_APB2_DIV_16 + * @retval PCLK2 clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PCLK2_FREQ(__HCLKFREQ__, __APB2PRESCALER__) ((__HCLKFREQ__) >> APBPrescTable[(__APB2PRESCALER__) >> RCC_CFGR_PPRE2_Pos]) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_LL_EF_HSE HSE + * @{ + */ + +/** + * @brief Enable the Clock Security System. + * @rmtoll CR CSSON LL_RCC_HSE_EnableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_EnableCSS(void) +{ + SET_BIT(RCC->CR, RCC_CR_CSSON); +} + +/** + * @brief Enable HSE external oscillator (HSE Bypass) + * @rmtoll CR HSEBYP LL_RCC_HSE_EnableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_EnableBypass(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); +} + +/** + * @brief Disable HSE external oscillator (HSE Bypass) + * @rmtoll CR HSEBYP LL_RCC_HSE_DisableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_DisableBypass(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); +} + +/** + * @brief Enable HSE crystal oscillator (HSE ON) + * @rmtoll CR HSEON LL_RCC_HSE_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEON); +} + +/** + * @brief Disable HSE crystal oscillator (HSE ON) + * @rmtoll CR HSEON LL_RCC_HSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); +} + +/** + * @brief Check if HSE oscillator Ready + * @rmtoll CR HSERDY LL_RCC_HSE_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSE_IsReady(void) +{ + return (READ_BIT(RCC->CR, RCC_CR_HSERDY) == (RCC_CR_HSERDY)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_HSI HSI + * @{ + */ + +/** + * @brief Enable HSI oscillator + * @rmtoll CR HSION LL_RCC_HSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSION); +} + +/** + * @brief Disable HSI oscillator + * @rmtoll CR HSION LL_RCC_HSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSION); +} + +/** + * @brief Check if HSI clock is ready + * @rmtoll CR HSIRDY LL_RCC_HSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_IsReady(void) +{ + return (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == (RCC_CR_HSIRDY)); +} + +/** + * @brief Get HSI Calibration value + * @note When HSITRIM is written, HSICAL is updated with the sum of + * HSITRIM and the factory trim value + * @rmtoll CR HSICAL LL_RCC_HSI_GetCalibration + * @retval Between Min_Data = 0x00 and Max_Data = 0xFF + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibration(void) +{ + return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSICAL) >> RCC_CR_HSICAL_Pos); +} + +/** + * @brief Set HSI Calibration trimming + * @note user-programmable trimming value that is added to the HSICAL + * @note Default value is 16, which, when added to the HSICAL value, + * should trim the HSI to 16 MHz +/- 1 % + * @rmtoll CR HSITRIM LL_RCC_HSI_SetCalibTrimming + * @param Value Between Min_Data = 0 and Max_Data = 31 + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_SetCalibTrimming(uint32_t Value) +{ + MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, Value << RCC_CR_HSITRIM_Pos); +} + +/** + * @brief Get HSI Calibration trimming + * @rmtoll CR HSITRIM LL_RCC_HSI_GetCalibTrimming + * @retval Between Min_Data = 0 and Max_Data = 31 + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibTrimming(void) +{ + return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_LSE LSE + * @{ + */ + +/** + * @brief Enable Low Speed External (LSE) crystal. + * @rmtoll BDCR LSEON LL_RCC_LSE_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_Enable(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); +} + +/** + * @brief Disable Low Speed External (LSE) crystal. + * @rmtoll BDCR LSEON LL_RCC_LSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_Disable(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); +} + +/** + * @brief Enable external clock source (LSE bypass). + * @rmtoll BDCR LSEBYP LL_RCC_LSE_EnableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_EnableBypass(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); +} + +/** + * @brief Disable external clock source (LSE bypass). + * @rmtoll BDCR LSEBYP LL_RCC_LSE_DisableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_DisableBypass(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); +} + +/** + * @brief Check if LSE oscillator Ready + * @rmtoll BDCR LSERDY LL_RCC_LSE_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_IsReady(void) +{ + return (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == (RCC_BDCR_LSERDY)); +} + +#if defined(RCC_BDCR_LSEMOD) +/** + * @brief Enable LSE high drive mode. + * @note LSE high drive mode can be enabled only when the LSE clock is disabled + * @rmtoll BDCR LSEMOD LL_RCC_LSE_EnableHighDriveMode + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_EnableHighDriveMode(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEMOD); +} + +/** + * @brief Disable LSE high drive mode. + * @note LSE high drive mode can be disabled only when the LSE clock is disabled + * @rmtoll BDCR LSEMOD LL_RCC_LSE_DisableHighDriveMode + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_DisableHighDriveMode(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEMOD); +} +#endif /* RCC_BDCR_LSEMOD */ + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_LSI LSI + * @{ + */ + +/** + * @brief Enable LSI Oscillator + * @rmtoll CSR LSION LL_RCC_LSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_Enable(void) +{ + SET_BIT(RCC->CSR, RCC_CSR_LSION); +} + +/** + * @brief Disable LSI Oscillator + * @rmtoll CSR LSION LL_RCC_LSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_Disable(void) +{ + CLEAR_BIT(RCC->CSR, RCC_CSR_LSION); +} + +/** + * @brief Check if LSI is Ready + * @rmtoll CSR LSIRDY LL_RCC_LSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSI_IsReady(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == (RCC_CSR_LSIRDY)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_System System + * @{ + */ + +/** + * @brief Configure the system clock source + * @rmtoll CFGR SW LL_RCC_SetSysClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_SYS_CLKSOURCE_HSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_HSE + * @arg @ref LL_RCC_SYS_CLKSOURCE_PLL + * @arg @ref LL_RCC_SYS_CLKSOURCE_PLLR (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSysClkSource(uint32_t Source) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, Source); +} + +/** + * @brief Get the system clock source + * @rmtoll CFGR SWS LL_RCC_GetSysClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSE + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_PLL + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_PLLR (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_RCC_GetSysClkSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS)); +} + +/** + * @brief Set AHB prescaler + * @rmtoll CFGR HPRE LL_RCC_SetAHBPrescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAHBPrescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, Prescaler); +} + +/** + * @brief Set APB1 prescaler + * @rmtoll CFGR PPRE1 LL_RCC_SetAPB1Prescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAPB1Prescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, Prescaler); +} + +/** + * @brief Set APB2 prescaler + * @rmtoll CFGR PPRE2 LL_RCC_SetAPB2Prescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_APB2_DIV_1 + * @arg @ref LL_RCC_APB2_DIV_2 + * @arg @ref LL_RCC_APB2_DIV_4 + * @arg @ref LL_RCC_APB2_DIV_8 + * @arg @ref LL_RCC_APB2_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAPB2Prescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, Prescaler); +} + +/** + * @brief Get AHB prescaler + * @rmtoll CFGR HPRE LL_RCC_GetAHBPrescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAHBPrescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_HPRE)); +} + +/** + * @brief Get APB1 prescaler + * @rmtoll CFGR PPRE1 LL_RCC_GetAPB1Prescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAPB1Prescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE1)); +} + +/** + * @brief Get APB2 prescaler + * @rmtoll CFGR PPRE2 LL_RCC_GetAPB2Prescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_APB2_DIV_1 + * @arg @ref LL_RCC_APB2_DIV_2 + * @arg @ref LL_RCC_APB2_DIV_4 + * @arg @ref LL_RCC_APB2_DIV_8 + * @arg @ref LL_RCC_APB2_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAPB2Prescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE2)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_MCO MCO + * @{ + */ + +#if defined(RCC_CFGR_MCO1EN) +/** + * @brief Enable MCO1 output + * @rmtoll CFGR RCC_CFGR_MCO1EN LL_RCC_MCO1_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_MCO1_Enable(void) +{ + SET_BIT(RCC->CFGR, RCC_CFGR_MCO1EN); +} + +/** + * @brief Disable MCO1 output + * @rmtoll CFGR RCC_CFGR_MCO1EN LL_RCC_MCO1_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_MCO1_Disable(void) +{ + CLEAR_BIT(RCC->CFGR, RCC_CFGR_MCO1EN); +} +#endif /* RCC_CFGR_MCO1EN */ + +#if defined(RCC_CFGR_MCO2EN) +/** + * @brief Enable MCO2 output + * @rmtoll CFGR RCC_CFGR_MCO2EN LL_RCC_MCO2_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_MCO2_Enable(void) +{ + SET_BIT(RCC->CFGR, RCC_CFGR_MCO2EN); +} + +/** + * @brief Disable MCO2 output + * @rmtoll CFGR RCC_CFGR_MCO2EN LL_RCC_MCO2_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_MCO2_Disable(void) +{ + CLEAR_BIT(RCC->CFGR, RCC_CFGR_MCO2EN); +} +#endif /* RCC_CFGR_MCO2EN */ + +/** + * @brief Configure MCOx + * @rmtoll CFGR MCO1 LL_RCC_ConfigMCO\n + * CFGR MCO1PRE LL_RCC_ConfigMCO\n + * CFGR MCO2 LL_RCC_ConfigMCO\n + * CFGR MCO2PRE LL_RCC_ConfigMCO + * @param MCOxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO1SOURCE_HSI + * @arg @ref LL_RCC_MCO1SOURCE_LSE + * @arg @ref LL_RCC_MCO1SOURCE_HSE + * @arg @ref LL_RCC_MCO1SOURCE_PLLCLK + * @arg @ref LL_RCC_MCO2SOURCE_SYSCLK + * @arg @ref LL_RCC_MCO2SOURCE_PLLI2S + * @arg @ref LL_RCC_MCO2SOURCE_HSE + * @arg @ref LL_RCC_MCO2SOURCE_PLLCLK + * @param MCOxPrescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO1_DIV_1 + * @arg @ref LL_RCC_MCO1_DIV_2 + * @arg @ref LL_RCC_MCO1_DIV_3 + * @arg @ref LL_RCC_MCO1_DIV_4 + * @arg @ref LL_RCC_MCO1_DIV_5 + * @arg @ref LL_RCC_MCO2_DIV_1 + * @arg @ref LL_RCC_MCO2_DIV_2 + * @arg @ref LL_RCC_MCO2_DIV_3 + * @arg @ref LL_RCC_MCO2_DIV_4 + * @arg @ref LL_RCC_MCO2_DIV_5 + * @retval None + */ +__STATIC_INLINE void LL_RCC_ConfigMCO(uint32_t MCOxSource, uint32_t MCOxPrescaler) +{ + MODIFY_REG(RCC->CFGR, (MCOxSource & 0xFFFF0000U) | (MCOxPrescaler & 0xFFFF0000U), (MCOxSource << 16U) | (MCOxPrescaler << 16U)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_Peripheral_Clock_Source Peripheral Clock Source + * @{ + */ +#if defined(FMPI2C1) +/** + * @brief Configure FMPI2C clock source + * @rmtoll DCKCFGR2 FMPI2C1SEL LL_RCC_SetFMPI2CClockSource + * @param FMPI2CxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE_HSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetFMPI2CClockSource(uint32_t FMPI2CxSource) +{ + MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, FMPI2CxSource); +} +#endif /* FMPI2C1 */ + +#if defined(LPTIM1) +/** + * @brief Configure LPTIMx clock source + * @rmtoll DCKCFGR2 LPTIM1SEL LL_RCC_SetLPTIMClockSource + * @param LPTIMxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetLPTIMClockSource(uint32_t LPTIMxSource) +{ + MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL, LPTIMxSource); +} +#endif /* LPTIM1 */ + +#if defined(SAI1) +/** + * @brief Configure SAIx clock source + * @rmtoll DCKCFGR SAI1SRC LL_RCC_SetSAIClockSource\n + * DCKCFGR SAI2SRC LL_RCC_SetSAIClockSource\n + * DCKCFGR SAI1ASRC LL_RCC_SetSAIClockSource\n + * DCKCFGR SAI1BSRC LL_RCC_SetSAIClockSource + * @param SAIxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSAI (*) + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLI2S (*) + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL (*) + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PIN (*) + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSAI (*) + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLI2S (*) + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL (*) + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSRC (*) + * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLLSAI (*) + * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLLI2S (*) + * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PIN (*) + * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLL (*) + * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLLSRC (*) + * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLLSAI (*) + * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLLI2S (*) + * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PIN (*) + * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLL (*) + * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLLSRC (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSAIClockSource(uint32_t SAIxSource) +{ + MODIFY_REG(RCC->DCKCFGR, (SAIxSource & 0xFFFF0000U), (SAIxSource << 16U)); +} +#endif /* SAI1 */ + +#if defined(RCC_DCKCFGR_SDIOSEL) || defined(RCC_DCKCFGR2_SDIOSEL) +/** + * @brief Configure SDIO clock source + * @rmtoll DCKCFGR SDIOSEL LL_RCC_SetSDIOClockSource\n + * DCKCFGR2 SDIOSEL LL_RCC_SetSDIOClockSource + * @param SDIOxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_SDIO_CLKSOURCE_PLL48CLK + * @arg @ref LL_RCC_SDIO_CLKSOURCE_SYSCLK + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSDIOClockSource(uint32_t SDIOxSource) +{ +#if defined(RCC_DCKCFGR_SDIOSEL) + MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SDIOSEL, SDIOxSource); +#else + MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL, SDIOxSource); +#endif /* RCC_DCKCFGR_SDIOSEL */ +} +#endif /* RCC_DCKCFGR_SDIOSEL || RCC_DCKCFGR2_SDIOSEL */ + +#if defined(RCC_DCKCFGR_CK48MSEL) || defined(RCC_DCKCFGR2_CK48MSEL) +/** + * @brief Configure 48Mhz domain clock source + * @rmtoll DCKCFGR CK48MSEL LL_RCC_SetCK48MClockSource\n + * DCKCFGR2 CK48MSEL LL_RCC_SetCK48MClockSource + * @param CK48MxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLL + * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLLSAI (*) + * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLLI2S (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetCK48MClockSource(uint32_t CK48MxSource) +{ +#if defined(RCC_DCKCFGR_CK48MSEL) + MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CK48MSEL, CK48MxSource); +#else + MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, CK48MxSource); +#endif /* RCC_DCKCFGR_CK48MSEL */ +} + +#if defined(RNG) +/** + * @brief Configure RNG clock source + * @rmtoll DCKCFGR CK48MSEL LL_RCC_SetRNGClockSource\n + * DCKCFGR2 CK48MSEL LL_RCC_SetRNGClockSource + * @param RNGxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_RNG_CLKSOURCE_PLL + * @arg @ref LL_RCC_RNG_CLKSOURCE_PLLSAI (*) + * @arg @ref LL_RCC_RNG_CLKSOURCE_PLLI2S (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRNGClockSource(uint32_t RNGxSource) +{ +#if defined(RCC_DCKCFGR_CK48MSEL) + MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CK48MSEL, RNGxSource); +#else + MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, RNGxSource); +#endif /* RCC_DCKCFGR_CK48MSEL */ +} +#endif /* RNG */ + +#if defined(USB_OTG_FS) || defined(USB_OTG_HS) +/** + * @brief Configure USB clock source + * @rmtoll DCKCFGR CK48MSEL LL_RCC_SetUSBClockSource\n + * DCKCFGR2 CK48MSEL LL_RCC_SetUSBClockSource + * @param USBxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL + * @arg @ref LL_RCC_USB_CLKSOURCE_PLLSAI (*) + * @arg @ref LL_RCC_USB_CLKSOURCE_PLLI2S (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetUSBClockSource(uint32_t USBxSource) +{ +#if defined(RCC_DCKCFGR_CK48MSEL) + MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CK48MSEL, USBxSource); +#else + MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, USBxSource); +#endif /* RCC_DCKCFGR_CK48MSEL */ +} +#endif /* USB_OTG_FS || USB_OTG_HS */ +#endif /* RCC_DCKCFGR_CK48MSEL || RCC_DCKCFGR2_CK48MSEL */ + +#if defined(CEC) +/** + * @brief Configure CEC clock source + * @rmtoll DCKCFGR2 CECSEL LL_RCC_SetCECClockSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE_HSI_DIV488 + * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetCECClockSource(uint32_t Source) +{ + MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL, Source); +} +#endif /* CEC */ + +/** + * @brief Configure I2S clock source + * @rmtoll CFGR I2SSRC LL_RCC_SetI2SClockSource\n + * DCKCFGR I2SSRC LL_RCC_SetI2SClockSource\n + * DCKCFGR I2S1SRC LL_RCC_SetI2SClockSource\n + * DCKCFGR I2S2SRC LL_RCC_SetI2SClockSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLLI2S (*) + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PIN + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLL (*) + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLLSRC (*) + * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLLI2S (*) + * @arg @ref LL_RCC_I2S2_CLKSOURCE_PIN (*) + * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLL (*) + * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLLSRC (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetI2SClockSource(uint32_t Source) +{ +#if defined(RCC_CFGR_I2SSRC) + MODIFY_REG(RCC->CFGR, RCC_CFGR_I2SSRC, Source); +#else + MODIFY_REG(RCC->DCKCFGR, (Source & 0xFFFF0000U), (Source << 16U)); +#endif /* RCC_CFGR_I2SSRC */ +} + +#if defined(DSI) +/** + * @brief Configure DSI clock source + * @rmtoll DCKCFGR DSISEL LL_RCC_SetDSIClockSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_DSI_CLKSOURCE_PHY + * @arg @ref LL_RCC_DSI_CLKSOURCE_PLL + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetDSIClockSource(uint32_t Source) +{ + MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_DSISEL, Source); +} +#endif /* DSI */ + +#if defined(DFSDM1_Channel0) +/** + * @brief Configure DFSDM Audio clock source + * @rmtoll DCKCFGR CKDFSDM1ASEL LL_RCC_SetDFSDMAudioClockSource\n + * DCKCFGR CKDFSDM2ASEL LL_RCC_SetDFSDMAudioClockSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_I2S1 + * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_I2S2 + * @arg @ref LL_RCC_DFSDM2_AUDIO_CLKSOURCE_I2S1 (*) + * @arg @ref LL_RCC_DFSDM2_AUDIO_CLKSOURCE_I2S2 (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetDFSDMAudioClockSource(uint32_t Source) +{ + MODIFY_REG(RCC->DCKCFGR, (Source & 0x0000FFFFU), (Source >> 16U)); +} + +/** + * @brief Configure DFSDM Kernel clock source + * @rmtoll DCKCFGR CKDFSDM1SEL LL_RCC_SetDFSDMClockSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_DFSDM2_CLKSOURCE_PCLK2 (*) + * @arg @ref LL_RCC_DFSDM2_CLKSOURCE_SYSCLK (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetDFSDMClockSource(uint32_t Source) +{ + MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL, Source); +} +#endif /* DFSDM1_Channel0 */ + +#if defined(SPDIFRX) +/** + * @brief Configure SPDIFRX clock source + * @rmtoll DCKCFGR2 SPDIFRXSEL LL_RCC_SetSPDIFRXClockSource + * @param SPDIFRXxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_SPDIFRX1_CLKSOURCE_PLL + * @arg @ref LL_RCC_SPDIFRX1_CLKSOURCE_PLLI2S + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSPDIFRXClockSource(uint32_t SPDIFRXxSource) +{ + MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SPDIFRXSEL, SPDIFRXxSource); +} +#endif /* SPDIFRX */ + +#if defined(FMPI2C1) +/** + * @brief Get FMPI2C clock source + * @rmtoll DCKCFGR2 FMPI2C1SEL LL_RCC_GetFMPI2CClockSource + * @param FMPI2Cx This parameter can be one of the following values: + * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_FMPI2C1_CLKSOURCE_HSI + */ +__STATIC_INLINE uint32_t LL_RCC_GetFMPI2CClockSource(uint32_t FMPI2Cx) +{ + return (uint32_t)(READ_BIT(RCC->DCKCFGR2, FMPI2Cx)); +} +#endif /* FMPI2C1 */ + +#if defined(LPTIM1) +/** + * @brief Get LPTIMx clock source + * @rmtoll DCKCFGR2 LPTIM1SEL LL_RCC_GetLPTIMClockSource + * @param LPTIMx This parameter can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetLPTIMClockSource(uint32_t LPTIMx) +{ + return (uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL)); +} +#endif /* LPTIM1 */ + +#if defined(SAI1) +/** + * @brief Get SAIx clock source + * @rmtoll DCKCFGR SAI1SEL LL_RCC_GetSAIClockSource\n + * DCKCFGR SAI2SEL LL_RCC_GetSAIClockSource\n + * DCKCFGR SAI1ASRC LL_RCC_GetSAIClockSource\n + * DCKCFGR SAI1BSRC LL_RCC_GetSAIClockSource + * @param SAIx This parameter can be one of the following values: + * @arg @ref LL_RCC_SAI1_CLKSOURCE (*) + * @arg @ref LL_RCC_SAI2_CLKSOURCE (*) + * @arg @ref LL_RCC_SAI1_A_CLKSOURCE (*) + * @arg @ref LL_RCC_SAI1_B_CLKSOURCE (*) + * + * (*) value not defined in all devices. + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSAI (*) + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLI2S (*) + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL (*) + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PIN (*) + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSAI (*) + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLI2S (*) + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL (*) + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSRC (*) + * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLLSAI (*) + * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLLI2S (*) + * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PIN (*) + * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLL (*) + * @arg @ref LL_RCC_SAI1_A_CLKSOURCE_PLLSRC (*) + * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLLSAI (*) + * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLLI2S (*) + * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PIN (*) + * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLL (*) + * @arg @ref LL_RCC_SAI1_B_CLKSOURCE_PLLSRC (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_RCC_GetSAIClockSource(uint32_t SAIx) +{ + return (uint32_t)(READ_BIT(RCC->DCKCFGR, SAIx) >> 16U | SAIx); +} +#endif /* SAI1 */ + +#if defined(RCC_DCKCFGR_SDIOSEL) || defined(RCC_DCKCFGR2_SDIOSEL) +/** + * @brief Get SDIOx clock source + * @rmtoll DCKCFGR SDIOSEL LL_RCC_GetSDIOClockSource\n + * DCKCFGR2 SDIOSEL LL_RCC_GetSDIOClockSource + * @param SDIOx This parameter can be one of the following values: + * @arg @ref LL_RCC_SDIO_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SDIO_CLKSOURCE_PLL48CLK + * @arg @ref LL_RCC_SDIO_CLKSOURCE_SYSCLK + */ +__STATIC_INLINE uint32_t LL_RCC_GetSDIOClockSource(uint32_t SDIOx) +{ +#if defined(RCC_DCKCFGR_SDIOSEL) + return (uint32_t)(READ_BIT(RCC->DCKCFGR, SDIOx)); +#else + return (uint32_t)(READ_BIT(RCC->DCKCFGR2, SDIOx)); +#endif /* RCC_DCKCFGR_SDIOSEL */ +} +#endif /* RCC_DCKCFGR_SDIOSEL || RCC_DCKCFGR2_SDIOSEL */ + +#if defined(RCC_DCKCFGR_CK48MSEL) || defined(RCC_DCKCFGR2_CK48MSEL) +/** + * @brief Get 48Mhz domain clock source + * @rmtoll DCKCFGR CK48MSEL LL_RCC_GetCK48MClockSource\n + * DCKCFGR2 CK48MSEL LL_RCC_GetCK48MClockSource + * @param CK48Mx This parameter can be one of the following values: + * @arg @ref LL_RCC_CK48M_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLL + * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLLSAI (*) + * @arg @ref LL_RCC_CK48M_CLKSOURCE_PLLI2S (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_RCC_GetCK48MClockSource(uint32_t CK48Mx) +{ +#if defined(RCC_DCKCFGR_CK48MSEL) + return (uint32_t)(READ_BIT(RCC->DCKCFGR, CK48Mx)); +#else + return (uint32_t)(READ_BIT(RCC->DCKCFGR2, CK48Mx)); +#endif /* RCC_DCKCFGR_CK48MSEL */ +} + +#if defined(RNG) +/** + * @brief Get RNGx clock source + * @rmtoll DCKCFGR CK48MSEL LL_RCC_GetRNGClockSource\n + * DCKCFGR2 CK48MSEL LL_RCC_GetRNGClockSource + * @param RNGx This parameter can be one of the following values: + * @arg @ref LL_RCC_RNG_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RNG_CLKSOURCE_PLL + * @arg @ref LL_RCC_RNG_CLKSOURCE_PLLSAI (*) + * @arg @ref LL_RCC_RNG_CLKSOURCE_PLLI2S (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_RCC_GetRNGClockSource(uint32_t RNGx) +{ +#if defined(RCC_DCKCFGR_CK48MSEL) + return (uint32_t)(READ_BIT(RCC->DCKCFGR, RNGx)); +#else + return (uint32_t)(READ_BIT(RCC->DCKCFGR2, RNGx)); +#endif /* RCC_DCKCFGR_CK48MSEL */ +} +#endif /* RNG */ + +#if defined(USB_OTG_FS) || defined(USB_OTG_HS) +/** + * @brief Get USBx clock source + * @rmtoll DCKCFGR CK48MSEL LL_RCC_GetUSBClockSource\n + * DCKCFGR2 CK48MSEL LL_RCC_GetUSBClockSource + * @param USBx This parameter can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL + * @arg @ref LL_RCC_USB_CLKSOURCE_PLLSAI (*) + * @arg @ref LL_RCC_USB_CLKSOURCE_PLLI2S (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_RCC_GetUSBClockSource(uint32_t USBx) +{ +#if defined(RCC_DCKCFGR_CK48MSEL) + return (uint32_t)(READ_BIT(RCC->DCKCFGR, USBx)); +#else + return (uint32_t)(READ_BIT(RCC->DCKCFGR2, USBx)); +#endif /* RCC_DCKCFGR_CK48MSEL */ +} +#endif /* USB_OTG_FS || USB_OTG_HS */ +#endif /* RCC_DCKCFGR_CK48MSEL || RCC_DCKCFGR2_CK48MSEL */ + +#if defined(CEC) +/** + * @brief Get CEC Clock Source + * @rmtoll DCKCFGR2 CECSEL LL_RCC_GetCECClockSource + * @param CECx This parameter can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE_HSI_DIV488 + * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetCECClockSource(uint32_t CECx) +{ + return (uint32_t)(READ_BIT(RCC->DCKCFGR2, CECx)); +} +#endif /* CEC */ + +/** + * @brief Get I2S Clock Source + * @rmtoll CFGR I2SSRC LL_RCC_GetI2SClockSource\n + * DCKCFGR I2SSRC LL_RCC_GetI2SClockSource\n + * DCKCFGR I2S1SRC LL_RCC_GetI2SClockSource\n + * DCKCFGR I2S2SRC LL_RCC_GetI2SClockSource + * @param I2Sx This parameter can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE + * @arg @ref LL_RCC_I2S2_CLKSOURCE (*) + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLLI2S (*) + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PIN + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLL (*) + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PLLSRC (*) + * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLLI2S (*) + * @arg @ref LL_RCC_I2S2_CLKSOURCE_PIN (*) + * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLL (*) + * @arg @ref LL_RCC_I2S2_CLKSOURCE_PLLSRC (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_RCC_GetI2SClockSource(uint32_t I2Sx) +{ +#if defined(RCC_CFGR_I2SSRC) + return (uint32_t)(READ_BIT(RCC->CFGR, I2Sx)); +#else + return (uint32_t)(READ_BIT(RCC->DCKCFGR, I2Sx) >> 16U | I2Sx); +#endif /* RCC_CFGR_I2SSRC */ +} + +#if defined(DFSDM1_Channel0) +/** + * @brief Get DFSDM Audio Clock Source + * @rmtoll DCKCFGR CKDFSDM1ASEL LL_RCC_GetDFSDMAudioClockSource\n + * DCKCFGR CKDFSDM2ASEL LL_RCC_GetDFSDMAudioClockSource + * @param DFSDMx This parameter can be one of the following values: + * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE + * @arg @ref LL_RCC_DFSDM2_AUDIO_CLKSOURCE (*) + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_I2S1 + * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_I2S2 + * @arg @ref LL_RCC_DFSDM2_AUDIO_CLKSOURCE_I2S1 (*) + * @arg @ref LL_RCC_DFSDM2_AUDIO_CLKSOURCE_I2S2 (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_RCC_GetDFSDMAudioClockSource(uint32_t DFSDMx) +{ + return (uint32_t)(READ_BIT(RCC->DCKCFGR, DFSDMx) << 16U | DFSDMx); +} + +/** + * @brief Get DFSDM Audio Clock Source + * @rmtoll DCKCFGR CKDFSDM1SEL LL_RCC_GetDFSDMClockSource + * @param DFSDMx This parameter can be one of the following values: + * @arg @ref LL_RCC_DFSDM1_CLKSOURCE + * @arg @ref LL_RCC_DFSDM2_CLKSOURCE (*) + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_DFSDM2_CLKSOURCE_PCLK2 (*) + * @arg @ref LL_RCC_DFSDM2_CLKSOURCE_SYSCLK (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_RCC_GetDFSDMClockSource(uint32_t DFSDMx) +{ + return (uint32_t)(READ_BIT(RCC->DCKCFGR, DFSDMx)); +} +#endif /* DFSDM1_Channel0 */ + +#if defined(SPDIFRX) +/** + * @brief Get SPDIFRX clock source + * @rmtoll DCKCFGR2 SPDIFRXSEL LL_RCC_GetSPDIFRXClockSource + * @param SPDIFRXx This parameter can be one of the following values: + * @arg @ref LL_RCC_SPDIFRX1_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SPDIFRX1_CLKSOURCE_PLL + * @arg @ref LL_RCC_SPDIFRX1_CLKSOURCE_PLLI2S + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_RCC_GetSPDIFRXClockSource(uint32_t SPDIFRXx) +{ + return (uint32_t)(READ_BIT(RCC->DCKCFGR2, SPDIFRXx)); +} +#endif /* SPDIFRX */ + +#if defined(DSI) +/** + * @brief Get DSI Clock Source + * @rmtoll DCKCFGR DSISEL LL_RCC_GetDSIClockSource + * @param DSIx This parameter can be one of the following values: + * @arg @ref LL_RCC_DSI_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_DSI_CLKSOURCE_PHY + * @arg @ref LL_RCC_DSI_CLKSOURCE_PLL + */ +__STATIC_INLINE uint32_t LL_RCC_GetDSIClockSource(uint32_t DSIx) +{ + return (uint32_t)(READ_BIT(RCC->DCKCFGR, DSIx)); +} +#endif /* DSI */ + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_RTC RTC + * @{ + */ + +/** + * @brief Set RTC Clock Source + * @note Once the RTC clock source has been selected, it cannot be changed anymore unless + * the Backup domain is reset, or unless a failure is detected on LSE (LSECSSD is + * set). The BDRST bit can be used to reset them. + * @rmtoll BDCR RTCSEL LL_RCC_SetRTCClockSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI + * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRTCClockSource(uint32_t Source) +{ + MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, Source); +} + +/** + * @brief Get RTC Clock Source + * @rmtoll BDCR RTCSEL LL_RCC_GetRTCClockSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI + * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetRTCClockSource(void) +{ + return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)); +} + +/** + * @brief Enable RTC + * @rmtoll BDCR RTCEN LL_RCC_EnableRTC + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableRTC(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN); +} + +/** + * @brief Disable RTC + * @rmtoll BDCR RTCEN LL_RCC_DisableRTC + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableRTC(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN); +} + +/** + * @brief Check if RTC has been enabled or not + * @rmtoll BDCR RTCEN LL_RCC_IsEnabledRTC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledRTC(void) +{ + return (READ_BIT(RCC->BDCR, RCC_BDCR_RTCEN) == (RCC_BDCR_RTCEN)); +} + +/** + * @brief Force the Backup domain reset + * @rmtoll BDCR BDRST LL_RCC_ForceBackupDomainReset + * @retval None + */ +__STATIC_INLINE void LL_RCC_ForceBackupDomainReset(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_BDRST); +} + +/** + * @brief Release the Backup domain reset + * @rmtoll BDCR BDRST LL_RCC_ReleaseBackupDomainReset + * @retval None + */ +__STATIC_INLINE void LL_RCC_ReleaseBackupDomainReset(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST); +} + +/** + * @brief Set HSE Prescalers for RTC Clock + * @rmtoll CFGR RTCPRE LL_RCC_SetRTC_HSEPrescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_RTC_NOCLOCK + * @arg @ref LL_RCC_RTC_HSE_DIV_2 + * @arg @ref LL_RCC_RTC_HSE_DIV_3 + * @arg @ref LL_RCC_RTC_HSE_DIV_4 + * @arg @ref LL_RCC_RTC_HSE_DIV_5 + * @arg @ref LL_RCC_RTC_HSE_DIV_6 + * @arg @ref LL_RCC_RTC_HSE_DIV_7 + * @arg @ref LL_RCC_RTC_HSE_DIV_8 + * @arg @ref LL_RCC_RTC_HSE_DIV_9 + * @arg @ref LL_RCC_RTC_HSE_DIV_10 + * @arg @ref LL_RCC_RTC_HSE_DIV_11 + * @arg @ref LL_RCC_RTC_HSE_DIV_12 + * @arg @ref LL_RCC_RTC_HSE_DIV_13 + * @arg @ref LL_RCC_RTC_HSE_DIV_14 + * @arg @ref LL_RCC_RTC_HSE_DIV_15 + * @arg @ref LL_RCC_RTC_HSE_DIV_16 + * @arg @ref LL_RCC_RTC_HSE_DIV_17 + * @arg @ref LL_RCC_RTC_HSE_DIV_18 + * @arg @ref LL_RCC_RTC_HSE_DIV_19 + * @arg @ref LL_RCC_RTC_HSE_DIV_20 + * @arg @ref LL_RCC_RTC_HSE_DIV_21 + * @arg @ref LL_RCC_RTC_HSE_DIV_22 + * @arg @ref LL_RCC_RTC_HSE_DIV_23 + * @arg @ref LL_RCC_RTC_HSE_DIV_24 + * @arg @ref LL_RCC_RTC_HSE_DIV_25 + * @arg @ref LL_RCC_RTC_HSE_DIV_26 + * @arg @ref LL_RCC_RTC_HSE_DIV_27 + * @arg @ref LL_RCC_RTC_HSE_DIV_28 + * @arg @ref LL_RCC_RTC_HSE_DIV_29 + * @arg @ref LL_RCC_RTC_HSE_DIV_30 + * @arg @ref LL_RCC_RTC_HSE_DIV_31 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRTC_HSEPrescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, Prescaler); +} + +/** + * @brief Get HSE Prescalers for RTC Clock + * @rmtoll CFGR RTCPRE LL_RCC_GetRTC_HSEPrescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RTC_NOCLOCK + * @arg @ref LL_RCC_RTC_HSE_DIV_2 + * @arg @ref LL_RCC_RTC_HSE_DIV_3 + * @arg @ref LL_RCC_RTC_HSE_DIV_4 + * @arg @ref LL_RCC_RTC_HSE_DIV_5 + * @arg @ref LL_RCC_RTC_HSE_DIV_6 + * @arg @ref LL_RCC_RTC_HSE_DIV_7 + * @arg @ref LL_RCC_RTC_HSE_DIV_8 + * @arg @ref LL_RCC_RTC_HSE_DIV_9 + * @arg @ref LL_RCC_RTC_HSE_DIV_10 + * @arg @ref LL_RCC_RTC_HSE_DIV_11 + * @arg @ref LL_RCC_RTC_HSE_DIV_12 + * @arg @ref LL_RCC_RTC_HSE_DIV_13 + * @arg @ref LL_RCC_RTC_HSE_DIV_14 + * @arg @ref LL_RCC_RTC_HSE_DIV_15 + * @arg @ref LL_RCC_RTC_HSE_DIV_16 + * @arg @ref LL_RCC_RTC_HSE_DIV_17 + * @arg @ref LL_RCC_RTC_HSE_DIV_18 + * @arg @ref LL_RCC_RTC_HSE_DIV_19 + * @arg @ref LL_RCC_RTC_HSE_DIV_20 + * @arg @ref LL_RCC_RTC_HSE_DIV_21 + * @arg @ref LL_RCC_RTC_HSE_DIV_22 + * @arg @ref LL_RCC_RTC_HSE_DIV_23 + * @arg @ref LL_RCC_RTC_HSE_DIV_24 + * @arg @ref LL_RCC_RTC_HSE_DIV_25 + * @arg @ref LL_RCC_RTC_HSE_DIV_26 + * @arg @ref LL_RCC_RTC_HSE_DIV_27 + * @arg @ref LL_RCC_RTC_HSE_DIV_28 + * @arg @ref LL_RCC_RTC_HSE_DIV_29 + * @arg @ref LL_RCC_RTC_HSE_DIV_30 + * @arg @ref LL_RCC_RTC_HSE_DIV_31 + */ +__STATIC_INLINE uint32_t LL_RCC_GetRTC_HSEPrescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_RTCPRE)); +} + +/** + * @} + */ + +#if defined(RCC_DCKCFGR_TIMPRE) +/** @defgroup RCC_LL_EF_TIM_CLOCK_PRESCALER TIM + * @{ + */ + +/** + * @brief Set Timers Clock Prescalers + * @rmtoll DCKCFGR TIMPRE LL_RCC_SetTIMPrescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_TIM_PRESCALER_TWICE + * @arg @ref LL_RCC_TIM_PRESCALER_FOUR_TIMES + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetTIMPrescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_TIMPRE, Prescaler); +} + +/** + * @brief Get Timers Clock Prescalers + * @rmtoll DCKCFGR TIMPRE LL_RCC_GetTIMPrescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_TIM_PRESCALER_TWICE + * @arg @ref LL_RCC_TIM_PRESCALER_FOUR_TIMES + */ +__STATIC_INLINE uint32_t LL_RCC_GetTIMPrescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_TIMPRE)); +} + +/** + * @} + */ +#endif /* RCC_DCKCFGR_TIMPRE */ + +/** @defgroup RCC_LL_EF_PLL PLL + * @{ + */ + +/** + * @brief Enable PLL + * @rmtoll CR PLLON LL_RCC_PLL_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_PLLON); +} + +/** + * @brief Disable PLL + * @note Cannot be disabled if the PLL clock is used as the system clock + * @rmtoll CR PLLON LL_RCC_PLL_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_PLLON); +} + +/** + * @brief Check if PLL Ready + * @rmtoll CR PLLRDY LL_RCC_PLL_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_IsReady(void) +{ + return (READ_BIT(RCC->CR, RCC_CR_PLLRDY) == (RCC_CR_PLLRDY)); +} + +/** + * @brief Configure PLL used for SYSCLK Domain + * @note PLL Source and PLLM Divider can be written only when PLL, + * PLLI2S and PLLSAI(*) are disabled + * @note PLLN/PLLP can be written only when PLL is disabled + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_SYS\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_SYS\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_SYS\n + * PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_SYS\n + * PLLCFGR PLLP LL_RCC_PLL_ConfigDomain_SYS + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @arg @ref LL_RCC_PLLM_DIV_9 + * @arg @ref LL_RCC_PLLM_DIV_10 + * @arg @ref LL_RCC_PLLM_DIV_11 + * @arg @ref LL_RCC_PLLM_DIV_12 + * @arg @ref LL_RCC_PLLM_DIV_13 + * @arg @ref LL_RCC_PLLM_DIV_14 + * @arg @ref LL_RCC_PLLM_DIV_15 + * @arg @ref LL_RCC_PLLM_DIV_16 + * @arg @ref LL_RCC_PLLM_DIV_17 + * @arg @ref LL_RCC_PLLM_DIV_18 + * @arg @ref LL_RCC_PLLM_DIV_19 + * @arg @ref LL_RCC_PLLM_DIV_20 + * @arg @ref LL_RCC_PLLM_DIV_21 + * @arg @ref LL_RCC_PLLM_DIV_22 + * @arg @ref LL_RCC_PLLM_DIV_23 + * @arg @ref LL_RCC_PLLM_DIV_24 + * @arg @ref LL_RCC_PLLM_DIV_25 + * @arg @ref LL_RCC_PLLM_DIV_26 + * @arg @ref LL_RCC_PLLM_DIV_27 + * @arg @ref LL_RCC_PLLM_DIV_28 + * @arg @ref LL_RCC_PLLM_DIV_29 + * @arg @ref LL_RCC_PLLM_DIV_30 + * @arg @ref LL_RCC_PLLM_DIV_31 + * @arg @ref LL_RCC_PLLM_DIV_32 + * @arg @ref LL_RCC_PLLM_DIV_33 + * @arg @ref LL_RCC_PLLM_DIV_34 + * @arg @ref LL_RCC_PLLM_DIV_35 + * @arg @ref LL_RCC_PLLM_DIV_36 + * @arg @ref LL_RCC_PLLM_DIV_37 + * @arg @ref LL_RCC_PLLM_DIV_38 + * @arg @ref LL_RCC_PLLM_DIV_39 + * @arg @ref LL_RCC_PLLM_DIV_40 + * @arg @ref LL_RCC_PLLM_DIV_41 + * @arg @ref LL_RCC_PLLM_DIV_42 + * @arg @ref LL_RCC_PLLM_DIV_43 + * @arg @ref LL_RCC_PLLM_DIV_44 + * @arg @ref LL_RCC_PLLM_DIV_45 + * @arg @ref LL_RCC_PLLM_DIV_46 + * @arg @ref LL_RCC_PLLM_DIV_47 + * @arg @ref LL_RCC_PLLM_DIV_48 + * @arg @ref LL_RCC_PLLM_DIV_49 + * @arg @ref LL_RCC_PLLM_DIV_50 + * @arg @ref LL_RCC_PLLM_DIV_51 + * @arg @ref LL_RCC_PLLM_DIV_52 + * @arg @ref LL_RCC_PLLM_DIV_53 + * @arg @ref LL_RCC_PLLM_DIV_54 + * @arg @ref LL_RCC_PLLM_DIV_55 + * @arg @ref LL_RCC_PLLM_DIV_56 + * @arg @ref LL_RCC_PLLM_DIV_57 + * @arg @ref LL_RCC_PLLM_DIV_58 + * @arg @ref LL_RCC_PLLM_DIV_59 + * @arg @ref LL_RCC_PLLM_DIV_60 + * @arg @ref LL_RCC_PLLM_DIV_61 + * @arg @ref LL_RCC_PLLM_DIV_62 + * @arg @ref LL_RCC_PLLM_DIV_63 + * @param PLLN Between 50/192(*) and 432 + * + * (*) value not defined in all devices. + * @param PLLP_R This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_8 + * @arg @ref LL_RCC_PLLR_DIV_2 (*) + * @arg @ref LL_RCC_PLLR_DIV_3 (*) + * @arg @ref LL_RCC_PLLR_DIV_4 (*) + * @arg @ref LL_RCC_PLLR_DIV_5 (*) + * @arg @ref LL_RCC_PLLR_DIV_6 (*) + * @arg @ref LL_RCC_PLLR_DIV_7 (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SYS(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP_R) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN, + Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos); + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLP, PLLP_R); +#if defined(RCC_PLLR_SYSCLK_SUPPORT) + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLR, PLLP_R); +#endif /* RCC_PLLR_SYSCLK_SUPPORT */ +} + +/** + * @brief Configure PLL used for 48Mhz domain clock + * @note PLL Source and PLLM Divider can be written only when PLL, + * PLLI2S and PLLSAI(*) are disabled + * @note PLLN/PLLQ can be written only when PLL is disabled + * @note This can be selected for USB, RNG, SDIO + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_48M\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_48M\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_48M\n + * PLLCFGR PLLQ LL_RCC_PLL_ConfigDomain_48M + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @arg @ref LL_RCC_PLLM_DIV_9 + * @arg @ref LL_RCC_PLLM_DIV_10 + * @arg @ref LL_RCC_PLLM_DIV_11 + * @arg @ref LL_RCC_PLLM_DIV_12 + * @arg @ref LL_RCC_PLLM_DIV_13 + * @arg @ref LL_RCC_PLLM_DIV_14 + * @arg @ref LL_RCC_PLLM_DIV_15 + * @arg @ref LL_RCC_PLLM_DIV_16 + * @arg @ref LL_RCC_PLLM_DIV_17 + * @arg @ref LL_RCC_PLLM_DIV_18 + * @arg @ref LL_RCC_PLLM_DIV_19 + * @arg @ref LL_RCC_PLLM_DIV_20 + * @arg @ref LL_RCC_PLLM_DIV_21 + * @arg @ref LL_RCC_PLLM_DIV_22 + * @arg @ref LL_RCC_PLLM_DIV_23 + * @arg @ref LL_RCC_PLLM_DIV_24 + * @arg @ref LL_RCC_PLLM_DIV_25 + * @arg @ref LL_RCC_PLLM_DIV_26 + * @arg @ref LL_RCC_PLLM_DIV_27 + * @arg @ref LL_RCC_PLLM_DIV_28 + * @arg @ref LL_RCC_PLLM_DIV_29 + * @arg @ref LL_RCC_PLLM_DIV_30 + * @arg @ref LL_RCC_PLLM_DIV_31 + * @arg @ref LL_RCC_PLLM_DIV_32 + * @arg @ref LL_RCC_PLLM_DIV_33 + * @arg @ref LL_RCC_PLLM_DIV_34 + * @arg @ref LL_RCC_PLLM_DIV_35 + * @arg @ref LL_RCC_PLLM_DIV_36 + * @arg @ref LL_RCC_PLLM_DIV_37 + * @arg @ref LL_RCC_PLLM_DIV_38 + * @arg @ref LL_RCC_PLLM_DIV_39 + * @arg @ref LL_RCC_PLLM_DIV_40 + * @arg @ref LL_RCC_PLLM_DIV_41 + * @arg @ref LL_RCC_PLLM_DIV_42 + * @arg @ref LL_RCC_PLLM_DIV_43 + * @arg @ref LL_RCC_PLLM_DIV_44 + * @arg @ref LL_RCC_PLLM_DIV_45 + * @arg @ref LL_RCC_PLLM_DIV_46 + * @arg @ref LL_RCC_PLLM_DIV_47 + * @arg @ref LL_RCC_PLLM_DIV_48 + * @arg @ref LL_RCC_PLLM_DIV_49 + * @arg @ref LL_RCC_PLLM_DIV_50 + * @arg @ref LL_RCC_PLLM_DIV_51 + * @arg @ref LL_RCC_PLLM_DIV_52 + * @arg @ref LL_RCC_PLLM_DIV_53 + * @arg @ref LL_RCC_PLLM_DIV_54 + * @arg @ref LL_RCC_PLLM_DIV_55 + * @arg @ref LL_RCC_PLLM_DIV_56 + * @arg @ref LL_RCC_PLLM_DIV_57 + * @arg @ref LL_RCC_PLLM_DIV_58 + * @arg @ref LL_RCC_PLLM_DIV_59 + * @arg @ref LL_RCC_PLLM_DIV_60 + * @arg @ref LL_RCC_PLLM_DIV_61 + * @arg @ref LL_RCC_PLLM_DIV_62 + * @arg @ref LL_RCC_PLLM_DIV_63 + * @param PLLN Between 50/192(*) and 432 + * + * (*) value not defined in all devices. + * @param PLLQ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @arg @ref LL_RCC_PLLQ_DIV_9 + * @arg @ref LL_RCC_PLLQ_DIV_10 + * @arg @ref LL_RCC_PLLQ_DIV_11 + * @arg @ref LL_RCC_PLLQ_DIV_12 + * @arg @ref LL_RCC_PLLQ_DIV_13 + * @arg @ref LL_RCC_PLLQ_DIV_14 + * @arg @ref LL_RCC_PLLQ_DIV_15 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLQ, + Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLQ); +} + +#if defined(DSI) +/** + * @brief Configure PLL used for DSI clock + * @note PLL Source and PLLM Divider can be written only when PLL, + * PLLI2S and PLLSAI are disabled + * @note PLLN/PLLR can be written only when PLL is disabled + * @note This can be selected for DSI + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_DSI\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_DSI\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_DSI\n + * PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_DSI + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @arg @ref LL_RCC_PLLM_DIV_9 + * @arg @ref LL_RCC_PLLM_DIV_10 + * @arg @ref LL_RCC_PLLM_DIV_11 + * @arg @ref LL_RCC_PLLM_DIV_12 + * @arg @ref LL_RCC_PLLM_DIV_13 + * @arg @ref LL_RCC_PLLM_DIV_14 + * @arg @ref LL_RCC_PLLM_DIV_15 + * @arg @ref LL_RCC_PLLM_DIV_16 + * @arg @ref LL_RCC_PLLM_DIV_17 + * @arg @ref LL_RCC_PLLM_DIV_18 + * @arg @ref LL_RCC_PLLM_DIV_19 + * @arg @ref LL_RCC_PLLM_DIV_20 + * @arg @ref LL_RCC_PLLM_DIV_21 + * @arg @ref LL_RCC_PLLM_DIV_22 + * @arg @ref LL_RCC_PLLM_DIV_23 + * @arg @ref LL_RCC_PLLM_DIV_24 + * @arg @ref LL_RCC_PLLM_DIV_25 + * @arg @ref LL_RCC_PLLM_DIV_26 + * @arg @ref LL_RCC_PLLM_DIV_27 + * @arg @ref LL_RCC_PLLM_DIV_28 + * @arg @ref LL_RCC_PLLM_DIV_29 + * @arg @ref LL_RCC_PLLM_DIV_30 + * @arg @ref LL_RCC_PLLM_DIV_31 + * @arg @ref LL_RCC_PLLM_DIV_32 + * @arg @ref LL_RCC_PLLM_DIV_33 + * @arg @ref LL_RCC_PLLM_DIV_34 + * @arg @ref LL_RCC_PLLM_DIV_35 + * @arg @ref LL_RCC_PLLM_DIV_36 + * @arg @ref LL_RCC_PLLM_DIV_37 + * @arg @ref LL_RCC_PLLM_DIV_38 + * @arg @ref LL_RCC_PLLM_DIV_39 + * @arg @ref LL_RCC_PLLM_DIV_40 + * @arg @ref LL_RCC_PLLM_DIV_41 + * @arg @ref LL_RCC_PLLM_DIV_42 + * @arg @ref LL_RCC_PLLM_DIV_43 + * @arg @ref LL_RCC_PLLM_DIV_44 + * @arg @ref LL_RCC_PLLM_DIV_45 + * @arg @ref LL_RCC_PLLM_DIV_46 + * @arg @ref LL_RCC_PLLM_DIV_47 + * @arg @ref LL_RCC_PLLM_DIV_48 + * @arg @ref LL_RCC_PLLM_DIV_49 + * @arg @ref LL_RCC_PLLM_DIV_50 + * @arg @ref LL_RCC_PLLM_DIV_51 + * @arg @ref LL_RCC_PLLM_DIV_52 + * @arg @ref LL_RCC_PLLM_DIV_53 + * @arg @ref LL_RCC_PLLM_DIV_54 + * @arg @ref LL_RCC_PLLM_DIV_55 + * @arg @ref LL_RCC_PLLM_DIV_56 + * @arg @ref LL_RCC_PLLM_DIV_57 + * @arg @ref LL_RCC_PLLM_DIV_58 + * @arg @ref LL_RCC_PLLM_DIV_59 + * @arg @ref LL_RCC_PLLM_DIV_60 + * @arg @ref LL_RCC_PLLM_DIV_61 + * @arg @ref LL_RCC_PLLM_DIV_62 + * @arg @ref LL_RCC_PLLM_DIV_63 + * @param PLLN Between 50 and 432 + * @param PLLR This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLR_DIV_2 + * @arg @ref LL_RCC_PLLR_DIV_3 + * @arg @ref LL_RCC_PLLR_DIV_4 + * @arg @ref LL_RCC_PLLR_DIV_5 + * @arg @ref LL_RCC_PLLR_DIV_6 + * @arg @ref LL_RCC_PLLR_DIV_7 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_DSI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLR, + Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLR); +} +#endif /* DSI */ + +#if defined(RCC_PLLR_I2S_CLKSOURCE_SUPPORT) +/** + * @brief Configure PLL used for I2S clock + * @note PLL Source and PLLM Divider can be written only when PLL, + * PLLI2S and PLLSAI are disabled + * @note PLLN/PLLR can be written only when PLL is disabled + * @note This can be selected for I2S + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_I2S\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_I2S\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_I2S\n + * PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_I2S + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @arg @ref LL_RCC_PLLM_DIV_9 + * @arg @ref LL_RCC_PLLM_DIV_10 + * @arg @ref LL_RCC_PLLM_DIV_11 + * @arg @ref LL_RCC_PLLM_DIV_12 + * @arg @ref LL_RCC_PLLM_DIV_13 + * @arg @ref LL_RCC_PLLM_DIV_14 + * @arg @ref LL_RCC_PLLM_DIV_15 + * @arg @ref LL_RCC_PLLM_DIV_16 + * @arg @ref LL_RCC_PLLM_DIV_17 + * @arg @ref LL_RCC_PLLM_DIV_18 + * @arg @ref LL_RCC_PLLM_DIV_19 + * @arg @ref LL_RCC_PLLM_DIV_20 + * @arg @ref LL_RCC_PLLM_DIV_21 + * @arg @ref LL_RCC_PLLM_DIV_22 + * @arg @ref LL_RCC_PLLM_DIV_23 + * @arg @ref LL_RCC_PLLM_DIV_24 + * @arg @ref LL_RCC_PLLM_DIV_25 + * @arg @ref LL_RCC_PLLM_DIV_26 + * @arg @ref LL_RCC_PLLM_DIV_27 + * @arg @ref LL_RCC_PLLM_DIV_28 + * @arg @ref LL_RCC_PLLM_DIV_29 + * @arg @ref LL_RCC_PLLM_DIV_30 + * @arg @ref LL_RCC_PLLM_DIV_31 + * @arg @ref LL_RCC_PLLM_DIV_32 + * @arg @ref LL_RCC_PLLM_DIV_33 + * @arg @ref LL_RCC_PLLM_DIV_34 + * @arg @ref LL_RCC_PLLM_DIV_35 + * @arg @ref LL_RCC_PLLM_DIV_36 + * @arg @ref LL_RCC_PLLM_DIV_37 + * @arg @ref LL_RCC_PLLM_DIV_38 + * @arg @ref LL_RCC_PLLM_DIV_39 + * @arg @ref LL_RCC_PLLM_DIV_40 + * @arg @ref LL_RCC_PLLM_DIV_41 + * @arg @ref LL_RCC_PLLM_DIV_42 + * @arg @ref LL_RCC_PLLM_DIV_43 + * @arg @ref LL_RCC_PLLM_DIV_44 + * @arg @ref LL_RCC_PLLM_DIV_45 + * @arg @ref LL_RCC_PLLM_DIV_46 + * @arg @ref LL_RCC_PLLM_DIV_47 + * @arg @ref LL_RCC_PLLM_DIV_48 + * @arg @ref LL_RCC_PLLM_DIV_49 + * @arg @ref LL_RCC_PLLM_DIV_50 + * @arg @ref LL_RCC_PLLM_DIV_51 + * @arg @ref LL_RCC_PLLM_DIV_52 + * @arg @ref LL_RCC_PLLM_DIV_53 + * @arg @ref LL_RCC_PLLM_DIV_54 + * @arg @ref LL_RCC_PLLM_DIV_55 + * @arg @ref LL_RCC_PLLM_DIV_56 + * @arg @ref LL_RCC_PLLM_DIV_57 + * @arg @ref LL_RCC_PLLM_DIV_58 + * @arg @ref LL_RCC_PLLM_DIV_59 + * @arg @ref LL_RCC_PLLM_DIV_60 + * @arg @ref LL_RCC_PLLM_DIV_61 + * @arg @ref LL_RCC_PLLM_DIV_62 + * @arg @ref LL_RCC_PLLM_DIV_63 + * @param PLLN Between 50 and 432 + * @param PLLR This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLR_DIV_2 + * @arg @ref LL_RCC_PLLR_DIV_3 + * @arg @ref LL_RCC_PLLR_DIV_4 + * @arg @ref LL_RCC_PLLR_DIV_5 + * @arg @ref LL_RCC_PLLR_DIV_6 + * @arg @ref LL_RCC_PLLR_DIV_7 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_I2S(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLR, + Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLR); +} +#endif /* RCC_PLLR_I2S_CLKSOURCE_SUPPORT */ + +#if defined(SPDIFRX) +/** + * @brief Configure PLL used for SPDIFRX clock + * @note PLL Source and PLLM Divider can be written only when PLL, + * PLLI2S and PLLSAI are disabled + * @note PLLN/PLLR can be written only when PLL is disabled + * @note This can be selected for SPDIFRX + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_SPDIFRX\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_SPDIFRX\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_SPDIFRX\n + * PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_SPDIFRX + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @arg @ref LL_RCC_PLLM_DIV_9 + * @arg @ref LL_RCC_PLLM_DIV_10 + * @arg @ref LL_RCC_PLLM_DIV_11 + * @arg @ref LL_RCC_PLLM_DIV_12 + * @arg @ref LL_RCC_PLLM_DIV_13 + * @arg @ref LL_RCC_PLLM_DIV_14 + * @arg @ref LL_RCC_PLLM_DIV_15 + * @arg @ref LL_RCC_PLLM_DIV_16 + * @arg @ref LL_RCC_PLLM_DIV_17 + * @arg @ref LL_RCC_PLLM_DIV_18 + * @arg @ref LL_RCC_PLLM_DIV_19 + * @arg @ref LL_RCC_PLLM_DIV_20 + * @arg @ref LL_RCC_PLLM_DIV_21 + * @arg @ref LL_RCC_PLLM_DIV_22 + * @arg @ref LL_RCC_PLLM_DIV_23 + * @arg @ref LL_RCC_PLLM_DIV_24 + * @arg @ref LL_RCC_PLLM_DIV_25 + * @arg @ref LL_RCC_PLLM_DIV_26 + * @arg @ref LL_RCC_PLLM_DIV_27 + * @arg @ref LL_RCC_PLLM_DIV_28 + * @arg @ref LL_RCC_PLLM_DIV_29 + * @arg @ref LL_RCC_PLLM_DIV_30 + * @arg @ref LL_RCC_PLLM_DIV_31 + * @arg @ref LL_RCC_PLLM_DIV_32 + * @arg @ref LL_RCC_PLLM_DIV_33 + * @arg @ref LL_RCC_PLLM_DIV_34 + * @arg @ref LL_RCC_PLLM_DIV_35 + * @arg @ref LL_RCC_PLLM_DIV_36 + * @arg @ref LL_RCC_PLLM_DIV_37 + * @arg @ref LL_RCC_PLLM_DIV_38 + * @arg @ref LL_RCC_PLLM_DIV_39 + * @arg @ref LL_RCC_PLLM_DIV_40 + * @arg @ref LL_RCC_PLLM_DIV_41 + * @arg @ref LL_RCC_PLLM_DIV_42 + * @arg @ref LL_RCC_PLLM_DIV_43 + * @arg @ref LL_RCC_PLLM_DIV_44 + * @arg @ref LL_RCC_PLLM_DIV_45 + * @arg @ref LL_RCC_PLLM_DIV_46 + * @arg @ref LL_RCC_PLLM_DIV_47 + * @arg @ref LL_RCC_PLLM_DIV_48 + * @arg @ref LL_RCC_PLLM_DIV_49 + * @arg @ref LL_RCC_PLLM_DIV_50 + * @arg @ref LL_RCC_PLLM_DIV_51 + * @arg @ref LL_RCC_PLLM_DIV_52 + * @arg @ref LL_RCC_PLLM_DIV_53 + * @arg @ref LL_RCC_PLLM_DIV_54 + * @arg @ref LL_RCC_PLLM_DIV_55 + * @arg @ref LL_RCC_PLLM_DIV_56 + * @arg @ref LL_RCC_PLLM_DIV_57 + * @arg @ref LL_RCC_PLLM_DIV_58 + * @arg @ref LL_RCC_PLLM_DIV_59 + * @arg @ref LL_RCC_PLLM_DIV_60 + * @arg @ref LL_RCC_PLLM_DIV_61 + * @arg @ref LL_RCC_PLLM_DIV_62 + * @arg @ref LL_RCC_PLLM_DIV_63 + * @param PLLN Between 50 and 432 + * @param PLLR This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLR_DIV_2 + * @arg @ref LL_RCC_PLLR_DIV_3 + * @arg @ref LL_RCC_PLLR_DIV_4 + * @arg @ref LL_RCC_PLLR_DIV_5 + * @arg @ref LL_RCC_PLLR_DIV_6 + * @arg @ref LL_RCC_PLLR_DIV_7 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SPDIFRX(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLR, + Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLR); +} +#endif /* SPDIFRX */ + +#if defined(RCC_PLLCFGR_PLLR) +#if defined(SAI1) +/** + * @brief Configure PLL used for SAI clock + * @note PLL Source and PLLM Divider can be written only when PLL, + * PLLI2S and PLLSAI are disabled + * @note PLLN/PLLR can be written only when PLL is disabled + * @note This can be selected for SAI + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_SAI\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_SAI\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_SAI\n + * PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_SAI\n + * DCKCFGR PLLDIVR LL_RCC_PLL_ConfigDomain_SAI + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @arg @ref LL_RCC_PLLM_DIV_9 + * @arg @ref LL_RCC_PLLM_DIV_10 + * @arg @ref LL_RCC_PLLM_DIV_11 + * @arg @ref LL_RCC_PLLM_DIV_12 + * @arg @ref LL_RCC_PLLM_DIV_13 + * @arg @ref LL_RCC_PLLM_DIV_14 + * @arg @ref LL_RCC_PLLM_DIV_15 + * @arg @ref LL_RCC_PLLM_DIV_16 + * @arg @ref LL_RCC_PLLM_DIV_17 + * @arg @ref LL_RCC_PLLM_DIV_18 + * @arg @ref LL_RCC_PLLM_DIV_19 + * @arg @ref LL_RCC_PLLM_DIV_20 + * @arg @ref LL_RCC_PLLM_DIV_21 + * @arg @ref LL_RCC_PLLM_DIV_22 + * @arg @ref LL_RCC_PLLM_DIV_23 + * @arg @ref LL_RCC_PLLM_DIV_24 + * @arg @ref LL_RCC_PLLM_DIV_25 + * @arg @ref LL_RCC_PLLM_DIV_26 + * @arg @ref LL_RCC_PLLM_DIV_27 + * @arg @ref LL_RCC_PLLM_DIV_28 + * @arg @ref LL_RCC_PLLM_DIV_29 + * @arg @ref LL_RCC_PLLM_DIV_30 + * @arg @ref LL_RCC_PLLM_DIV_31 + * @arg @ref LL_RCC_PLLM_DIV_32 + * @arg @ref LL_RCC_PLLM_DIV_33 + * @arg @ref LL_RCC_PLLM_DIV_34 + * @arg @ref LL_RCC_PLLM_DIV_35 + * @arg @ref LL_RCC_PLLM_DIV_36 + * @arg @ref LL_RCC_PLLM_DIV_37 + * @arg @ref LL_RCC_PLLM_DIV_38 + * @arg @ref LL_RCC_PLLM_DIV_39 + * @arg @ref LL_RCC_PLLM_DIV_40 + * @arg @ref LL_RCC_PLLM_DIV_41 + * @arg @ref LL_RCC_PLLM_DIV_42 + * @arg @ref LL_RCC_PLLM_DIV_43 + * @arg @ref LL_RCC_PLLM_DIV_44 + * @arg @ref LL_RCC_PLLM_DIV_45 + * @arg @ref LL_RCC_PLLM_DIV_46 + * @arg @ref LL_RCC_PLLM_DIV_47 + * @arg @ref LL_RCC_PLLM_DIV_48 + * @arg @ref LL_RCC_PLLM_DIV_49 + * @arg @ref LL_RCC_PLLM_DIV_50 + * @arg @ref LL_RCC_PLLM_DIV_51 + * @arg @ref LL_RCC_PLLM_DIV_52 + * @arg @ref LL_RCC_PLLM_DIV_53 + * @arg @ref LL_RCC_PLLM_DIV_54 + * @arg @ref LL_RCC_PLLM_DIV_55 + * @arg @ref LL_RCC_PLLM_DIV_56 + * @arg @ref LL_RCC_PLLM_DIV_57 + * @arg @ref LL_RCC_PLLM_DIV_58 + * @arg @ref LL_RCC_PLLM_DIV_59 + * @arg @ref LL_RCC_PLLM_DIV_60 + * @arg @ref LL_RCC_PLLM_DIV_61 + * @arg @ref LL_RCC_PLLM_DIV_62 + * @arg @ref LL_RCC_PLLM_DIV_63 + * @param PLLN Between 50 and 432 + * @param PLLR This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLR_DIV_2 + * @arg @ref LL_RCC_PLLR_DIV_3 + * @arg @ref LL_RCC_PLLR_DIV_4 + * @arg @ref LL_RCC_PLLR_DIV_5 + * @arg @ref LL_RCC_PLLR_DIV_6 + * @arg @ref LL_RCC_PLLR_DIV_7 + * @param PLLDIVR This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLDIVR_DIV_1 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_2 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_3 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_4 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_5 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_6 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_7 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_8 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_9 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_10 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_11 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_12 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_13 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_14 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_15 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_16 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_17 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_18 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_19 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_20 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_21 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_22 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_23 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_24 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_25 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_26 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_27 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_28 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_29 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_30 (*) + * @arg @ref LL_RCC_PLLDIVR_DIV_31 (*) + * + * (*) value not defined in all devices. + * @retval None + */ +#if defined(RCC_DCKCFGR_PLLDIVR) +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR, uint32_t PLLDIVR) +#else +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) +#endif /* RCC_DCKCFGR_PLLDIVR */ +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLR, + Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLR); +#if defined(RCC_DCKCFGR_PLLDIVR) + MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLDIVR, PLLDIVR); +#endif /* RCC_DCKCFGR_PLLDIVR */ +} +#endif /* SAI1 */ +#endif /* RCC_PLLCFGR_PLLR */ + +/** + * @brief Configure PLL clock source + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_SetMainSource + * @param PLLSource This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_SetMainSource(uint32_t PLLSource) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, PLLSource); +} + +/** + * @brief Get the oscillator used as PLL clock source. + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_GetMainSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetMainSource(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC)); +} + +/** + * @brief Get Main PLL multiplication factor for VCO + * @rmtoll PLLCFGR PLLN LL_RCC_PLL_GetN + * @retval Between 50/192(*) and 432 + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetN(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos); +} + +/** + * @brief Get Main PLL division factor for PLLP + * @rmtoll PLLCFGR PLLP LL_RCC_PLL_GetP + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_8 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetP(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP)); +} + +/** + * @brief Get Main PLL division factor for PLLQ + * @note used for PLL48MCLK selected for USB, RNG, SDIO (48 MHz clock) + * @rmtoll PLLCFGR PLLQ LL_RCC_PLL_GetQ + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_3 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_5 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_7 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @arg @ref LL_RCC_PLLQ_DIV_9 + * @arg @ref LL_RCC_PLLQ_DIV_10 + * @arg @ref LL_RCC_PLLQ_DIV_11 + * @arg @ref LL_RCC_PLLQ_DIV_12 + * @arg @ref LL_RCC_PLLQ_DIV_13 + * @arg @ref LL_RCC_PLLQ_DIV_14 + * @arg @ref LL_RCC_PLLQ_DIV_15 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetQ(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ)); +} + +#if defined(RCC_PLLCFGR_PLLR) +/** + * @brief Get Main PLL division factor for PLLR + * @note used for PLLCLK (system clock) + * @rmtoll PLLCFGR PLLR LL_RCC_PLL_GetR + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLR_DIV_2 + * @arg @ref LL_RCC_PLLR_DIV_3 + * @arg @ref LL_RCC_PLLR_DIV_4 + * @arg @ref LL_RCC_PLLR_DIV_5 + * @arg @ref LL_RCC_PLLR_DIV_6 + * @arg @ref LL_RCC_PLLR_DIV_7 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetR(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLR)); +} +#endif /* RCC_PLLCFGR_PLLR */ + +#if defined(RCC_DCKCFGR_PLLDIVR) +/** + * @brief Get Main PLL division factor for PLLDIVR + * @note used for PLLSAICLK (SAI1 and SAI2 clock) + * @rmtoll DCKCFGR PLLDIVR LL_RCC_PLL_GetDIVR + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLDIVR_DIV_1 + * @arg @ref LL_RCC_PLLDIVR_DIV_2 + * @arg @ref LL_RCC_PLLDIVR_DIV_3 + * @arg @ref LL_RCC_PLLDIVR_DIV_4 + * @arg @ref LL_RCC_PLLDIVR_DIV_5 + * @arg @ref LL_RCC_PLLDIVR_DIV_6 + * @arg @ref LL_RCC_PLLDIVR_DIV_7 + * @arg @ref LL_RCC_PLLDIVR_DIV_8 + * @arg @ref LL_RCC_PLLDIVR_DIV_9 + * @arg @ref LL_RCC_PLLDIVR_DIV_10 + * @arg @ref LL_RCC_PLLDIVR_DIV_11 + * @arg @ref LL_RCC_PLLDIVR_DIV_12 + * @arg @ref LL_RCC_PLLDIVR_DIV_13 + * @arg @ref LL_RCC_PLLDIVR_DIV_14 + * @arg @ref LL_RCC_PLLDIVR_DIV_15 + * @arg @ref LL_RCC_PLLDIVR_DIV_16 + * @arg @ref LL_RCC_PLLDIVR_DIV_17 + * @arg @ref LL_RCC_PLLDIVR_DIV_18 + * @arg @ref LL_RCC_PLLDIVR_DIV_19 + * @arg @ref LL_RCC_PLLDIVR_DIV_20 + * @arg @ref LL_RCC_PLLDIVR_DIV_21 + * @arg @ref LL_RCC_PLLDIVR_DIV_22 + * @arg @ref LL_RCC_PLLDIVR_DIV_23 + * @arg @ref LL_RCC_PLLDIVR_DIV_24 + * @arg @ref LL_RCC_PLLDIVR_DIV_25 + * @arg @ref LL_RCC_PLLDIVR_DIV_26 + * @arg @ref LL_RCC_PLLDIVR_DIV_27 + * @arg @ref LL_RCC_PLLDIVR_DIV_28 + * @arg @ref LL_RCC_PLLDIVR_DIV_29 + * @arg @ref LL_RCC_PLLDIVR_DIV_30 + * @arg @ref LL_RCC_PLLDIVR_DIV_31 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetDIVR(void) +{ + return (uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_PLLDIVR)); +} +#endif /* RCC_DCKCFGR_PLLDIVR */ + +/** + * @brief Get Division factor for the main PLL and other PLL + * @rmtoll PLLCFGR PLLM LL_RCC_PLL_GetDivider + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @arg @ref LL_RCC_PLLM_DIV_9 + * @arg @ref LL_RCC_PLLM_DIV_10 + * @arg @ref LL_RCC_PLLM_DIV_11 + * @arg @ref LL_RCC_PLLM_DIV_12 + * @arg @ref LL_RCC_PLLM_DIV_13 + * @arg @ref LL_RCC_PLLM_DIV_14 + * @arg @ref LL_RCC_PLLM_DIV_15 + * @arg @ref LL_RCC_PLLM_DIV_16 + * @arg @ref LL_RCC_PLLM_DIV_17 + * @arg @ref LL_RCC_PLLM_DIV_18 + * @arg @ref LL_RCC_PLLM_DIV_19 + * @arg @ref LL_RCC_PLLM_DIV_20 + * @arg @ref LL_RCC_PLLM_DIV_21 + * @arg @ref LL_RCC_PLLM_DIV_22 + * @arg @ref LL_RCC_PLLM_DIV_23 + * @arg @ref LL_RCC_PLLM_DIV_24 + * @arg @ref LL_RCC_PLLM_DIV_25 + * @arg @ref LL_RCC_PLLM_DIV_26 + * @arg @ref LL_RCC_PLLM_DIV_27 + * @arg @ref LL_RCC_PLLM_DIV_28 + * @arg @ref LL_RCC_PLLM_DIV_29 + * @arg @ref LL_RCC_PLLM_DIV_30 + * @arg @ref LL_RCC_PLLM_DIV_31 + * @arg @ref LL_RCC_PLLM_DIV_32 + * @arg @ref LL_RCC_PLLM_DIV_33 + * @arg @ref LL_RCC_PLLM_DIV_34 + * @arg @ref LL_RCC_PLLM_DIV_35 + * @arg @ref LL_RCC_PLLM_DIV_36 + * @arg @ref LL_RCC_PLLM_DIV_37 + * @arg @ref LL_RCC_PLLM_DIV_38 + * @arg @ref LL_RCC_PLLM_DIV_39 + * @arg @ref LL_RCC_PLLM_DIV_40 + * @arg @ref LL_RCC_PLLM_DIV_41 + * @arg @ref LL_RCC_PLLM_DIV_42 + * @arg @ref LL_RCC_PLLM_DIV_43 + * @arg @ref LL_RCC_PLLM_DIV_44 + * @arg @ref LL_RCC_PLLM_DIV_45 + * @arg @ref LL_RCC_PLLM_DIV_46 + * @arg @ref LL_RCC_PLLM_DIV_47 + * @arg @ref LL_RCC_PLLM_DIV_48 + * @arg @ref LL_RCC_PLLM_DIV_49 + * @arg @ref LL_RCC_PLLM_DIV_50 + * @arg @ref LL_RCC_PLLM_DIV_51 + * @arg @ref LL_RCC_PLLM_DIV_52 + * @arg @ref LL_RCC_PLLM_DIV_53 + * @arg @ref LL_RCC_PLLM_DIV_54 + * @arg @ref LL_RCC_PLLM_DIV_55 + * @arg @ref LL_RCC_PLLM_DIV_56 + * @arg @ref LL_RCC_PLLM_DIV_57 + * @arg @ref LL_RCC_PLLM_DIV_58 + * @arg @ref LL_RCC_PLLM_DIV_59 + * @arg @ref LL_RCC_PLLM_DIV_60 + * @arg @ref LL_RCC_PLLM_DIV_61 + * @arg @ref LL_RCC_PLLM_DIV_62 + * @arg @ref LL_RCC_PLLM_DIV_63 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetDivider(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM)); +} + +/** + * @brief Configure Spread Spectrum used for PLL + * @note These bits must be written before enabling PLL + * @rmtoll SSCGR MODPER LL_RCC_PLL_ConfigSpreadSpectrum\n + * SSCGR INCSTEP LL_RCC_PLL_ConfigSpreadSpectrum\n + * SSCGR SPREADSEL LL_RCC_PLL_ConfigSpreadSpectrum + * @param Mod Between Min_Data=0 and Max_Data=8191 + * @param Inc Between Min_Data=0 and Max_Data=32767 + * @param Sel This parameter can be one of the following values: + * @arg @ref LL_RCC_SPREAD_SELECT_CENTER + * @arg @ref LL_RCC_SPREAD_SELECT_DOWN + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigSpreadSpectrum(uint32_t Mod, uint32_t Inc, uint32_t Sel) +{ + MODIFY_REG(RCC->SSCGR, RCC_SSCGR_MODPER | RCC_SSCGR_INCSTEP | RCC_SSCGR_SPREADSEL, Mod | (Inc << RCC_SSCGR_INCSTEP_Pos) | Sel); +} + +/** + * @brief Get Spread Spectrum Modulation Period for PLL + * @rmtoll SSCGR MODPER LL_RCC_PLL_GetPeriodModulation + * @retval Between Min_Data=0 and Max_Data=8191 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetPeriodModulation(void) +{ + return (uint32_t)(READ_BIT(RCC->SSCGR, RCC_SSCGR_MODPER)); +} + +/** + * @brief Get Spread Spectrum Incrementation Step for PLL + * @note Must be written before enabling PLL + * @rmtoll SSCGR INCSTEP LL_RCC_PLL_GetStepIncrementation + * @retval Between Min_Data=0 and Max_Data=32767 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetStepIncrementation(void) +{ + return (uint32_t)(READ_BIT(RCC->SSCGR, RCC_SSCGR_INCSTEP) >> RCC_SSCGR_INCSTEP_Pos); +} + +/** + * @brief Get Spread Spectrum Selection for PLL + * @note Must be written before enabling PLL + * @rmtoll SSCGR SPREADSEL LL_RCC_PLL_GetSpreadSelection + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SPREAD_SELECT_CENTER + * @arg @ref LL_RCC_SPREAD_SELECT_DOWN + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetSpreadSelection(void) +{ + return (uint32_t)(READ_BIT(RCC->SSCGR, RCC_SSCGR_SPREADSEL)); +} + +/** + * @brief Enable Spread Spectrum for PLL. + * @rmtoll SSCGR SSCGEN LL_RCC_PLL_SpreadSpectrum_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_SpreadSpectrum_Enable(void) +{ + SET_BIT(RCC->SSCGR, RCC_SSCGR_SSCGEN); +} + +/** + * @brief Disable Spread Spectrum for PLL. + * @rmtoll SSCGR SSCGEN LL_RCC_PLL_SpreadSpectrum_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_SpreadSpectrum_Disable(void) +{ + CLEAR_BIT(RCC->SSCGR, RCC_SSCGR_SSCGEN); +} + +/** + * @} + */ + +#if defined(RCC_PLLI2S_SUPPORT) +/** @defgroup RCC_LL_EF_PLLI2S PLLI2S + * @{ + */ + +/** + * @brief Enable PLLI2S + * @rmtoll CR PLLI2SON LL_RCC_PLLI2S_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLI2S_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_PLLI2SON); +} + +/** + * @brief Disable PLLI2S + * @rmtoll CR PLLI2SON LL_RCC_PLLI2S_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLI2S_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_PLLI2SON); +} + +/** + * @brief Check if PLLI2S Ready + * @rmtoll CR PLLI2SRDY LL_RCC_PLLI2S_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLLI2S_IsReady(void) +{ + return (READ_BIT(RCC->CR, RCC_CR_PLLI2SRDY) == (RCC_CR_PLLI2SRDY)); +} + +#if (defined(RCC_DCKCFGR_PLLI2SDIVQ) || defined(RCC_DCKCFGR_PLLI2SDIVR)) +/** + * @brief Configure PLLI2S used for SAI domain clock + * @note PLL Source and PLLM Divider can be written only when PLL, + * PLLI2S and PLLSAI(*) are disabled + * @note PLLN/PLLQ/PLLR can be written only when PLLI2S is disabled + * @note This can be selected for SAI + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLI2S_ConfigDomain_SAI\n + * PLLI2SCFGR PLLI2SSRC LL_RCC_PLLI2S_ConfigDomain_SAI\n + * PLLCFGR PLLM LL_RCC_PLLI2S_ConfigDomain_SAI\n + * PLLI2SCFGR PLLI2SM LL_RCC_PLLI2S_ConfigDomain_SAI\n + * PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_ConfigDomain_SAI\n + * PLLI2SCFGR PLLI2SQ LL_RCC_PLLI2S_ConfigDomain_SAI\n + * PLLI2SCFGR PLLI2SR LL_RCC_PLLI2S_ConfigDomain_SAI\n + * DCKCFGR PLLI2SDIVQ LL_RCC_PLLI2S_ConfigDomain_SAI\n + * DCKCFGR PLLI2SDIVR LL_RCC_PLLI2S_ConfigDomain_SAI + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @arg @ref LL_RCC_PLLI2SSOURCE_PIN (*) + * + * (*) value not defined in all devices. + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLI2SM_DIV_2 + * @arg @ref LL_RCC_PLLI2SM_DIV_3 + * @arg @ref LL_RCC_PLLI2SM_DIV_4 + * @arg @ref LL_RCC_PLLI2SM_DIV_5 + * @arg @ref LL_RCC_PLLI2SM_DIV_6 + * @arg @ref LL_RCC_PLLI2SM_DIV_7 + * @arg @ref LL_RCC_PLLI2SM_DIV_8 + * @arg @ref LL_RCC_PLLI2SM_DIV_9 + * @arg @ref LL_RCC_PLLI2SM_DIV_10 + * @arg @ref LL_RCC_PLLI2SM_DIV_11 + * @arg @ref LL_RCC_PLLI2SM_DIV_12 + * @arg @ref LL_RCC_PLLI2SM_DIV_13 + * @arg @ref LL_RCC_PLLI2SM_DIV_14 + * @arg @ref LL_RCC_PLLI2SM_DIV_15 + * @arg @ref LL_RCC_PLLI2SM_DIV_16 + * @arg @ref LL_RCC_PLLI2SM_DIV_17 + * @arg @ref LL_RCC_PLLI2SM_DIV_18 + * @arg @ref LL_RCC_PLLI2SM_DIV_19 + * @arg @ref LL_RCC_PLLI2SM_DIV_20 + * @arg @ref LL_RCC_PLLI2SM_DIV_21 + * @arg @ref LL_RCC_PLLI2SM_DIV_22 + * @arg @ref LL_RCC_PLLI2SM_DIV_23 + * @arg @ref LL_RCC_PLLI2SM_DIV_24 + * @arg @ref LL_RCC_PLLI2SM_DIV_25 + * @arg @ref LL_RCC_PLLI2SM_DIV_26 + * @arg @ref LL_RCC_PLLI2SM_DIV_27 + * @arg @ref LL_RCC_PLLI2SM_DIV_28 + * @arg @ref LL_RCC_PLLI2SM_DIV_29 + * @arg @ref LL_RCC_PLLI2SM_DIV_30 + * @arg @ref LL_RCC_PLLI2SM_DIV_31 + * @arg @ref LL_RCC_PLLI2SM_DIV_32 + * @arg @ref LL_RCC_PLLI2SM_DIV_33 + * @arg @ref LL_RCC_PLLI2SM_DIV_34 + * @arg @ref LL_RCC_PLLI2SM_DIV_35 + * @arg @ref LL_RCC_PLLI2SM_DIV_36 + * @arg @ref LL_RCC_PLLI2SM_DIV_37 + * @arg @ref LL_RCC_PLLI2SM_DIV_38 + * @arg @ref LL_RCC_PLLI2SM_DIV_39 + * @arg @ref LL_RCC_PLLI2SM_DIV_40 + * @arg @ref LL_RCC_PLLI2SM_DIV_41 + * @arg @ref LL_RCC_PLLI2SM_DIV_42 + * @arg @ref LL_RCC_PLLI2SM_DIV_43 + * @arg @ref LL_RCC_PLLI2SM_DIV_44 + * @arg @ref LL_RCC_PLLI2SM_DIV_45 + * @arg @ref LL_RCC_PLLI2SM_DIV_46 + * @arg @ref LL_RCC_PLLI2SM_DIV_47 + * @arg @ref LL_RCC_PLLI2SM_DIV_48 + * @arg @ref LL_RCC_PLLI2SM_DIV_49 + * @arg @ref LL_RCC_PLLI2SM_DIV_50 + * @arg @ref LL_RCC_PLLI2SM_DIV_51 + * @arg @ref LL_RCC_PLLI2SM_DIV_52 + * @arg @ref LL_RCC_PLLI2SM_DIV_53 + * @arg @ref LL_RCC_PLLI2SM_DIV_54 + * @arg @ref LL_RCC_PLLI2SM_DIV_55 + * @arg @ref LL_RCC_PLLI2SM_DIV_56 + * @arg @ref LL_RCC_PLLI2SM_DIV_57 + * @arg @ref LL_RCC_PLLI2SM_DIV_58 + * @arg @ref LL_RCC_PLLI2SM_DIV_59 + * @arg @ref LL_RCC_PLLI2SM_DIV_60 + * @arg @ref LL_RCC_PLLI2SM_DIV_61 + * @arg @ref LL_RCC_PLLI2SM_DIV_62 + * @arg @ref LL_RCC_PLLI2SM_DIV_63 + * @param PLLN Between 50/192(*) and 432 + * + * (*) value not defined in all devices. + * @param PLLQ_R This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLI2SQ_DIV_2 (*) + * @arg @ref LL_RCC_PLLI2SQ_DIV_3 (*) + * @arg @ref LL_RCC_PLLI2SQ_DIV_4 (*) + * @arg @ref LL_RCC_PLLI2SQ_DIV_5 (*) + * @arg @ref LL_RCC_PLLI2SQ_DIV_6 (*) + * @arg @ref LL_RCC_PLLI2SQ_DIV_7 (*) + * @arg @ref LL_RCC_PLLI2SQ_DIV_8 (*) + * @arg @ref LL_RCC_PLLI2SQ_DIV_9 (*) + * @arg @ref LL_RCC_PLLI2SQ_DIV_10 (*) + * @arg @ref LL_RCC_PLLI2SQ_DIV_11 (*) + * @arg @ref LL_RCC_PLLI2SQ_DIV_12 (*) + * @arg @ref LL_RCC_PLLI2SQ_DIV_13 (*) + * @arg @ref LL_RCC_PLLI2SQ_DIV_14 (*) + * @arg @ref LL_RCC_PLLI2SQ_DIV_15 (*) + * @arg @ref LL_RCC_PLLI2SR_DIV_2 (*) + * @arg @ref LL_RCC_PLLI2SR_DIV_3 (*) + * @arg @ref LL_RCC_PLLI2SR_DIV_4 (*) + * @arg @ref LL_RCC_PLLI2SR_DIV_5 (*) + * @arg @ref LL_RCC_PLLI2SR_DIV_6 (*) + * @arg @ref LL_RCC_PLLI2SR_DIV_7 (*) + * + * (*) value not defined in all devices. + * @param PLLDIVQ_R This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_1 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_2 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_3 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_4 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_5 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_6 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_7 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_8 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_9 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_10 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_11 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_12 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_13 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_14 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_15 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_16 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_17 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_18 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_19 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_20 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_21 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_22 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_23 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_24 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_25 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_26 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_27 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_28 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_29 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_30 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_31 (*) + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_32 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_1 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_2 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_3 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_4 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_5 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_6 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_7 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_8 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_9 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_10 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_11 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_12 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_13 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_14 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_15 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_16 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_17 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_18 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_19 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_20 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_21 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_22 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_23 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_24 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_25 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_26 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_27 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_28 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_29 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_30 (*) + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_31 (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLI2S_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ_R, uint32_t PLLDIVQ_R) +{ + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&RCC->PLLCFGR) + (Source & 0x80U))); + MODIFY_REG(*pReg, RCC_PLLCFGR_PLLSRC, (Source & (~0x80U))); +#if defined(RCC_PLLI2SCFGR_PLLI2SM) + MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SM, PLLM); +#else + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, PLLM); +#endif /* RCC_PLLI2SCFGR_PLLI2SM */ + MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN, PLLN << RCC_PLLI2SCFGR_PLLI2SN_Pos); +#if defined(RCC_DCKCFGR_PLLI2SDIVQ) + MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SQ, PLLQ_R); + MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVQ, PLLDIVQ_R); +#else + MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SR, PLLQ_R); + MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVR, PLLDIVQ_R); +#endif /* RCC_DCKCFGR_PLLI2SDIVQ */ +} +#endif /* RCC_DCKCFGR_PLLI2SDIVQ && RCC_DCKCFGR_PLLI2SDIVR */ + +#if defined(RCC_PLLI2SCFGR_PLLI2SQ) && !defined(RCC_DCKCFGR_PLLI2SDIVQ) +/** + * @brief Configure PLLI2S used for 48Mhz domain clock + * @note PLL Source and PLLM Divider can be written only when PLL, + * PLLI2S and PLLSAI(*) are disabled + * @note PLLN/PLLQ can be written only when PLLI2S is disabled + * @note This can be selected for RNG, USB, SDIO + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLI2S_ConfigDomain_48M\n + * PLLI2SCFGR PLLI2SSRC LL_RCC_PLLI2S_ConfigDomain_48M\n + * PLLCFGR PLLM LL_RCC_PLLI2S_ConfigDomain_48M\n + * PLLI2SCFGR PLLI2SM LL_RCC_PLLI2S_ConfigDomain_48M\n + * PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_ConfigDomain_48M\n + * PLLI2SCFGR PLLI2SQ LL_RCC_PLLI2S_ConfigDomain_48M + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @arg @ref LL_RCC_PLLI2SSOURCE_PIN (*) + * + * (*) value not defined in all devices. + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLI2SM_DIV_2 + * @arg @ref LL_RCC_PLLI2SM_DIV_3 + * @arg @ref LL_RCC_PLLI2SM_DIV_4 + * @arg @ref LL_RCC_PLLI2SM_DIV_5 + * @arg @ref LL_RCC_PLLI2SM_DIV_6 + * @arg @ref LL_RCC_PLLI2SM_DIV_7 + * @arg @ref LL_RCC_PLLI2SM_DIV_8 + * @arg @ref LL_RCC_PLLI2SM_DIV_9 + * @arg @ref LL_RCC_PLLI2SM_DIV_10 + * @arg @ref LL_RCC_PLLI2SM_DIV_11 + * @arg @ref LL_RCC_PLLI2SM_DIV_12 + * @arg @ref LL_RCC_PLLI2SM_DIV_13 + * @arg @ref LL_RCC_PLLI2SM_DIV_14 + * @arg @ref LL_RCC_PLLI2SM_DIV_15 + * @arg @ref LL_RCC_PLLI2SM_DIV_16 + * @arg @ref LL_RCC_PLLI2SM_DIV_17 + * @arg @ref LL_RCC_PLLI2SM_DIV_18 + * @arg @ref LL_RCC_PLLI2SM_DIV_19 + * @arg @ref LL_RCC_PLLI2SM_DIV_20 + * @arg @ref LL_RCC_PLLI2SM_DIV_21 + * @arg @ref LL_RCC_PLLI2SM_DIV_22 + * @arg @ref LL_RCC_PLLI2SM_DIV_23 + * @arg @ref LL_RCC_PLLI2SM_DIV_24 + * @arg @ref LL_RCC_PLLI2SM_DIV_25 + * @arg @ref LL_RCC_PLLI2SM_DIV_26 + * @arg @ref LL_RCC_PLLI2SM_DIV_27 + * @arg @ref LL_RCC_PLLI2SM_DIV_28 + * @arg @ref LL_RCC_PLLI2SM_DIV_29 + * @arg @ref LL_RCC_PLLI2SM_DIV_30 + * @arg @ref LL_RCC_PLLI2SM_DIV_31 + * @arg @ref LL_RCC_PLLI2SM_DIV_32 + * @arg @ref LL_RCC_PLLI2SM_DIV_33 + * @arg @ref LL_RCC_PLLI2SM_DIV_34 + * @arg @ref LL_RCC_PLLI2SM_DIV_35 + * @arg @ref LL_RCC_PLLI2SM_DIV_36 + * @arg @ref LL_RCC_PLLI2SM_DIV_37 + * @arg @ref LL_RCC_PLLI2SM_DIV_38 + * @arg @ref LL_RCC_PLLI2SM_DIV_39 + * @arg @ref LL_RCC_PLLI2SM_DIV_40 + * @arg @ref LL_RCC_PLLI2SM_DIV_41 + * @arg @ref LL_RCC_PLLI2SM_DIV_42 + * @arg @ref LL_RCC_PLLI2SM_DIV_43 + * @arg @ref LL_RCC_PLLI2SM_DIV_44 + * @arg @ref LL_RCC_PLLI2SM_DIV_45 + * @arg @ref LL_RCC_PLLI2SM_DIV_46 + * @arg @ref LL_RCC_PLLI2SM_DIV_47 + * @arg @ref LL_RCC_PLLI2SM_DIV_48 + * @arg @ref LL_RCC_PLLI2SM_DIV_49 + * @arg @ref LL_RCC_PLLI2SM_DIV_50 + * @arg @ref LL_RCC_PLLI2SM_DIV_51 + * @arg @ref LL_RCC_PLLI2SM_DIV_52 + * @arg @ref LL_RCC_PLLI2SM_DIV_53 + * @arg @ref LL_RCC_PLLI2SM_DIV_54 + * @arg @ref LL_RCC_PLLI2SM_DIV_55 + * @arg @ref LL_RCC_PLLI2SM_DIV_56 + * @arg @ref LL_RCC_PLLI2SM_DIV_57 + * @arg @ref LL_RCC_PLLI2SM_DIV_58 + * @arg @ref LL_RCC_PLLI2SM_DIV_59 + * @arg @ref LL_RCC_PLLI2SM_DIV_60 + * @arg @ref LL_RCC_PLLI2SM_DIV_61 + * @arg @ref LL_RCC_PLLI2SM_DIV_62 + * @arg @ref LL_RCC_PLLI2SM_DIV_63 + * @param PLLN Between 50 and 432 + * @param PLLQ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLI2SQ_DIV_2 + * @arg @ref LL_RCC_PLLI2SQ_DIV_3 + * @arg @ref LL_RCC_PLLI2SQ_DIV_4 + * @arg @ref LL_RCC_PLLI2SQ_DIV_5 + * @arg @ref LL_RCC_PLLI2SQ_DIV_6 + * @arg @ref LL_RCC_PLLI2SQ_DIV_7 + * @arg @ref LL_RCC_PLLI2SQ_DIV_8 + * @arg @ref LL_RCC_PLLI2SQ_DIV_9 + * @arg @ref LL_RCC_PLLI2SQ_DIV_10 + * @arg @ref LL_RCC_PLLI2SQ_DIV_11 + * @arg @ref LL_RCC_PLLI2SQ_DIV_12 + * @arg @ref LL_RCC_PLLI2SQ_DIV_13 + * @arg @ref LL_RCC_PLLI2SQ_DIV_14 + * @arg @ref LL_RCC_PLLI2SQ_DIV_15 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLI2S_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) +{ + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&RCC->PLLCFGR) + (Source & 0x80U))); + MODIFY_REG(*pReg, RCC_PLLCFGR_PLLSRC, (Source & (~0x80U))); +#if defined(RCC_PLLI2SCFGR_PLLI2SM) + MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SM, PLLM); +#else + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, PLLM); +#endif /* RCC_PLLI2SCFGR_PLLI2SM */ + MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN | RCC_PLLI2SCFGR_PLLI2SQ, PLLN << RCC_PLLI2SCFGR_PLLI2SN_Pos | PLLQ); +} +#endif /* RCC_PLLI2SCFGR_PLLI2SQ && !RCC_DCKCFGR_PLLI2SDIVQ */ + +#if defined(SPDIFRX) +/** + * @brief Configure PLLI2S used for SPDIFRX domain clock + * @note PLL Source and PLLM Divider can be written only when PLL, + * PLLI2S and PLLSAI(*) are disabled + * @note PLLN/PLLP can be written only when PLLI2S is disabled + * @note This can be selected for SPDIFRX + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLI2S_ConfigDomain_SPDIFRX\n + * PLLCFGR PLLM LL_RCC_PLLI2S_ConfigDomain_SPDIFRX\n + * PLLI2SCFGR PLLI2SM LL_RCC_PLLI2S_ConfigDomain_SPDIFRX\n + * PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_ConfigDomain_SPDIFRX\n + * PLLI2SCFGR PLLI2SP LL_RCC_PLLI2S_ConfigDomain_SPDIFRX + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLI2SM_DIV_2 + * @arg @ref LL_RCC_PLLI2SM_DIV_3 + * @arg @ref LL_RCC_PLLI2SM_DIV_4 + * @arg @ref LL_RCC_PLLI2SM_DIV_5 + * @arg @ref LL_RCC_PLLI2SM_DIV_6 + * @arg @ref LL_RCC_PLLI2SM_DIV_7 + * @arg @ref LL_RCC_PLLI2SM_DIV_8 + * @arg @ref LL_RCC_PLLI2SM_DIV_9 + * @arg @ref LL_RCC_PLLI2SM_DIV_10 + * @arg @ref LL_RCC_PLLI2SM_DIV_11 + * @arg @ref LL_RCC_PLLI2SM_DIV_12 + * @arg @ref LL_RCC_PLLI2SM_DIV_13 + * @arg @ref LL_RCC_PLLI2SM_DIV_14 + * @arg @ref LL_RCC_PLLI2SM_DIV_15 + * @arg @ref LL_RCC_PLLI2SM_DIV_16 + * @arg @ref LL_RCC_PLLI2SM_DIV_17 + * @arg @ref LL_RCC_PLLI2SM_DIV_18 + * @arg @ref LL_RCC_PLLI2SM_DIV_19 + * @arg @ref LL_RCC_PLLI2SM_DIV_20 + * @arg @ref LL_RCC_PLLI2SM_DIV_21 + * @arg @ref LL_RCC_PLLI2SM_DIV_22 + * @arg @ref LL_RCC_PLLI2SM_DIV_23 + * @arg @ref LL_RCC_PLLI2SM_DIV_24 + * @arg @ref LL_RCC_PLLI2SM_DIV_25 + * @arg @ref LL_RCC_PLLI2SM_DIV_26 + * @arg @ref LL_RCC_PLLI2SM_DIV_27 + * @arg @ref LL_RCC_PLLI2SM_DIV_28 + * @arg @ref LL_RCC_PLLI2SM_DIV_29 + * @arg @ref LL_RCC_PLLI2SM_DIV_30 + * @arg @ref LL_RCC_PLLI2SM_DIV_31 + * @arg @ref LL_RCC_PLLI2SM_DIV_32 + * @arg @ref LL_RCC_PLLI2SM_DIV_33 + * @arg @ref LL_RCC_PLLI2SM_DIV_34 + * @arg @ref LL_RCC_PLLI2SM_DIV_35 + * @arg @ref LL_RCC_PLLI2SM_DIV_36 + * @arg @ref LL_RCC_PLLI2SM_DIV_37 + * @arg @ref LL_RCC_PLLI2SM_DIV_38 + * @arg @ref LL_RCC_PLLI2SM_DIV_39 + * @arg @ref LL_RCC_PLLI2SM_DIV_40 + * @arg @ref LL_RCC_PLLI2SM_DIV_41 + * @arg @ref LL_RCC_PLLI2SM_DIV_42 + * @arg @ref LL_RCC_PLLI2SM_DIV_43 + * @arg @ref LL_RCC_PLLI2SM_DIV_44 + * @arg @ref LL_RCC_PLLI2SM_DIV_45 + * @arg @ref LL_RCC_PLLI2SM_DIV_46 + * @arg @ref LL_RCC_PLLI2SM_DIV_47 + * @arg @ref LL_RCC_PLLI2SM_DIV_48 + * @arg @ref LL_RCC_PLLI2SM_DIV_49 + * @arg @ref LL_RCC_PLLI2SM_DIV_50 + * @arg @ref LL_RCC_PLLI2SM_DIV_51 + * @arg @ref LL_RCC_PLLI2SM_DIV_52 + * @arg @ref LL_RCC_PLLI2SM_DIV_53 + * @arg @ref LL_RCC_PLLI2SM_DIV_54 + * @arg @ref LL_RCC_PLLI2SM_DIV_55 + * @arg @ref LL_RCC_PLLI2SM_DIV_56 + * @arg @ref LL_RCC_PLLI2SM_DIV_57 + * @arg @ref LL_RCC_PLLI2SM_DIV_58 + * @arg @ref LL_RCC_PLLI2SM_DIV_59 + * @arg @ref LL_RCC_PLLI2SM_DIV_60 + * @arg @ref LL_RCC_PLLI2SM_DIV_61 + * @arg @ref LL_RCC_PLLI2SM_DIV_62 + * @arg @ref LL_RCC_PLLI2SM_DIV_63 + * @param PLLN Between 50 and 432 + * @param PLLP This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLI2SP_DIV_2 + * @arg @ref LL_RCC_PLLI2SP_DIV_4 + * @arg @ref LL_RCC_PLLI2SP_DIV_6 + * @arg @ref LL_RCC_PLLI2SP_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLI2S_ConfigDomain_SPDIFRX(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source); +#if defined(RCC_PLLI2SCFGR_PLLI2SM) + MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SM, PLLM); +#else + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, PLLM); +#endif /* RCC_PLLI2SCFGR_PLLI2SM */ + MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN | RCC_PLLI2SCFGR_PLLI2SP, PLLN << RCC_PLLI2SCFGR_PLLI2SN_Pos | PLLP); +} +#endif /* SPDIFRX */ + +/** + * @brief Configure PLLI2S used for I2S1 domain clock + * @note PLL Source and PLLM Divider can be written only when PLL, + * PLLI2S and PLLSAI(*) are disabled + * @note PLLN/PLLR can be written only when PLLI2S is disabled + * @note This can be selected for I2S + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLI2S_ConfigDomain_I2S\n + * PLLCFGR PLLM LL_RCC_PLLI2S_ConfigDomain_I2S\n + * PLLI2SCFGR PLLI2SSRC LL_RCC_PLLI2S_ConfigDomain_I2S\n + * PLLI2SCFGR PLLI2SM LL_RCC_PLLI2S_ConfigDomain_I2S\n + * PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_ConfigDomain_I2S\n + * PLLI2SCFGR PLLI2SR LL_RCC_PLLI2S_ConfigDomain_I2S + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @arg @ref LL_RCC_PLLI2SSOURCE_PIN (*) + * + * (*) value not defined in all devices. + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLI2SM_DIV_2 + * @arg @ref LL_RCC_PLLI2SM_DIV_3 + * @arg @ref LL_RCC_PLLI2SM_DIV_4 + * @arg @ref LL_RCC_PLLI2SM_DIV_5 + * @arg @ref LL_RCC_PLLI2SM_DIV_6 + * @arg @ref LL_RCC_PLLI2SM_DIV_7 + * @arg @ref LL_RCC_PLLI2SM_DIV_8 + * @arg @ref LL_RCC_PLLI2SM_DIV_9 + * @arg @ref LL_RCC_PLLI2SM_DIV_10 + * @arg @ref LL_RCC_PLLI2SM_DIV_11 + * @arg @ref LL_RCC_PLLI2SM_DIV_12 + * @arg @ref LL_RCC_PLLI2SM_DIV_13 + * @arg @ref LL_RCC_PLLI2SM_DIV_14 + * @arg @ref LL_RCC_PLLI2SM_DIV_15 + * @arg @ref LL_RCC_PLLI2SM_DIV_16 + * @arg @ref LL_RCC_PLLI2SM_DIV_17 + * @arg @ref LL_RCC_PLLI2SM_DIV_18 + * @arg @ref LL_RCC_PLLI2SM_DIV_19 + * @arg @ref LL_RCC_PLLI2SM_DIV_20 + * @arg @ref LL_RCC_PLLI2SM_DIV_21 + * @arg @ref LL_RCC_PLLI2SM_DIV_22 + * @arg @ref LL_RCC_PLLI2SM_DIV_23 + * @arg @ref LL_RCC_PLLI2SM_DIV_24 + * @arg @ref LL_RCC_PLLI2SM_DIV_25 + * @arg @ref LL_RCC_PLLI2SM_DIV_26 + * @arg @ref LL_RCC_PLLI2SM_DIV_27 + * @arg @ref LL_RCC_PLLI2SM_DIV_28 + * @arg @ref LL_RCC_PLLI2SM_DIV_29 + * @arg @ref LL_RCC_PLLI2SM_DIV_30 + * @arg @ref LL_RCC_PLLI2SM_DIV_31 + * @arg @ref LL_RCC_PLLI2SM_DIV_32 + * @arg @ref LL_RCC_PLLI2SM_DIV_33 + * @arg @ref LL_RCC_PLLI2SM_DIV_34 + * @arg @ref LL_RCC_PLLI2SM_DIV_35 + * @arg @ref LL_RCC_PLLI2SM_DIV_36 + * @arg @ref LL_RCC_PLLI2SM_DIV_37 + * @arg @ref LL_RCC_PLLI2SM_DIV_38 + * @arg @ref LL_RCC_PLLI2SM_DIV_39 + * @arg @ref LL_RCC_PLLI2SM_DIV_40 + * @arg @ref LL_RCC_PLLI2SM_DIV_41 + * @arg @ref LL_RCC_PLLI2SM_DIV_42 + * @arg @ref LL_RCC_PLLI2SM_DIV_43 + * @arg @ref LL_RCC_PLLI2SM_DIV_44 + * @arg @ref LL_RCC_PLLI2SM_DIV_45 + * @arg @ref LL_RCC_PLLI2SM_DIV_46 + * @arg @ref LL_RCC_PLLI2SM_DIV_47 + * @arg @ref LL_RCC_PLLI2SM_DIV_48 + * @arg @ref LL_RCC_PLLI2SM_DIV_49 + * @arg @ref LL_RCC_PLLI2SM_DIV_50 + * @arg @ref LL_RCC_PLLI2SM_DIV_51 + * @arg @ref LL_RCC_PLLI2SM_DIV_52 + * @arg @ref LL_RCC_PLLI2SM_DIV_53 + * @arg @ref LL_RCC_PLLI2SM_DIV_54 + * @arg @ref LL_RCC_PLLI2SM_DIV_55 + * @arg @ref LL_RCC_PLLI2SM_DIV_56 + * @arg @ref LL_RCC_PLLI2SM_DIV_57 + * @arg @ref LL_RCC_PLLI2SM_DIV_58 + * @arg @ref LL_RCC_PLLI2SM_DIV_59 + * @arg @ref LL_RCC_PLLI2SM_DIV_60 + * @arg @ref LL_RCC_PLLI2SM_DIV_61 + * @arg @ref LL_RCC_PLLI2SM_DIV_62 + * @arg @ref LL_RCC_PLLI2SM_DIV_63 + * @param PLLN Between 50/192(*) and 432 + * + * (*) value not defined in all devices. + * @param PLLR This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLI2SR_DIV_2 + * @arg @ref LL_RCC_PLLI2SR_DIV_3 + * @arg @ref LL_RCC_PLLI2SR_DIV_4 + * @arg @ref LL_RCC_PLLI2SR_DIV_5 + * @arg @ref LL_RCC_PLLI2SR_DIV_6 + * @arg @ref LL_RCC_PLLI2SR_DIV_7 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLI2S_ConfigDomain_I2S(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) +{ + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&RCC->PLLCFGR) + (Source & 0x80U))); + MODIFY_REG(*pReg, RCC_PLLCFGR_PLLSRC, (Source & (~0x80U))); +#if defined(RCC_PLLI2SCFGR_PLLI2SM) + MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SM, PLLM); +#else + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, PLLM); +#endif /* RCC_PLLI2SCFGR_PLLI2SM */ + MODIFY_REG(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN | RCC_PLLI2SCFGR_PLLI2SR, PLLN << RCC_PLLI2SCFGR_PLLI2SN_Pos | PLLR); +} + +/** + * @brief Get I2SPLL multiplication factor for VCO + * @rmtoll PLLI2SCFGR PLLI2SN LL_RCC_PLLI2S_GetN + * @retval Between 50/192(*) and 432 + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetN(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN) >> RCC_PLLI2SCFGR_PLLI2SN_Pos); +} + +#if defined(RCC_PLLI2SCFGR_PLLI2SQ) +/** + * @brief Get I2SPLL division factor for PLLI2SQ + * @rmtoll PLLI2SCFGR PLLI2SQ LL_RCC_PLLI2S_GetQ + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLI2SQ_DIV_2 + * @arg @ref LL_RCC_PLLI2SQ_DIV_3 + * @arg @ref LL_RCC_PLLI2SQ_DIV_4 + * @arg @ref LL_RCC_PLLI2SQ_DIV_5 + * @arg @ref LL_RCC_PLLI2SQ_DIV_6 + * @arg @ref LL_RCC_PLLI2SQ_DIV_7 + * @arg @ref LL_RCC_PLLI2SQ_DIV_8 + * @arg @ref LL_RCC_PLLI2SQ_DIV_9 + * @arg @ref LL_RCC_PLLI2SQ_DIV_10 + * @arg @ref LL_RCC_PLLI2SQ_DIV_11 + * @arg @ref LL_RCC_PLLI2SQ_DIV_12 + * @arg @ref LL_RCC_PLLI2SQ_DIV_13 + * @arg @ref LL_RCC_PLLI2SQ_DIV_14 + * @arg @ref LL_RCC_PLLI2SQ_DIV_15 + */ +__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetQ(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SQ)); +} +#endif /* RCC_PLLI2SCFGR_PLLI2SQ */ + +/** + * @brief Get I2SPLL division factor for PLLI2SR + * @note used for PLLI2SCLK (I2S clock) + * @rmtoll PLLI2SCFGR PLLI2SR LL_RCC_PLLI2S_GetR + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLI2SR_DIV_2 + * @arg @ref LL_RCC_PLLI2SR_DIV_3 + * @arg @ref LL_RCC_PLLI2SR_DIV_4 + * @arg @ref LL_RCC_PLLI2SR_DIV_5 + * @arg @ref LL_RCC_PLLI2SR_DIV_6 + * @arg @ref LL_RCC_PLLI2SR_DIV_7 + */ +__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetR(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SR)); +} + +#if defined(RCC_PLLI2SCFGR_PLLI2SP) +/** + * @brief Get I2SPLL division factor for PLLI2SP + * @note used for PLLSPDIFRXCLK (SPDIFRX clock) + * @rmtoll PLLI2SCFGR PLLI2SP LL_RCC_PLLI2S_GetP + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLI2SP_DIV_2 + * @arg @ref LL_RCC_PLLI2SP_DIV_4 + * @arg @ref LL_RCC_PLLI2SP_DIV_6 + * @arg @ref LL_RCC_PLLI2SP_DIV_8 + */ +__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetP(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SP)); +} +#endif /* RCC_PLLI2SCFGR_PLLI2SP */ + +#if defined(RCC_DCKCFGR_PLLI2SDIVQ) +/** + * @brief Get I2SPLL division factor for PLLI2SDIVQ + * @note used PLLSAICLK selected (SAI clock) + * @rmtoll DCKCFGR PLLI2SDIVQ LL_RCC_PLLI2S_GetDIVQ + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_1 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_2 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_3 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_4 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_5 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_6 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_7 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_8 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_9 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_10 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_11 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_12 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_13 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_14 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_15 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_16 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_17 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_18 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_19 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_20 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_21 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_22 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_23 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_24 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_25 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_26 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_27 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_28 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_29 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_30 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_31 + * @arg @ref LL_RCC_PLLI2SDIVQ_DIV_32 + */ +__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetDIVQ(void) +{ + return (uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVQ)); +} +#endif /* RCC_DCKCFGR_PLLI2SDIVQ */ + +#if defined(RCC_DCKCFGR_PLLI2SDIVR) +/** + * @brief Get I2SPLL division factor for PLLI2SDIVR + * @note used PLLSAICLK selected (SAI clock) + * @rmtoll DCKCFGR PLLI2SDIVR LL_RCC_PLLI2S_GetDIVR + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_1 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_2 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_3 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_4 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_5 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_6 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_7 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_8 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_9 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_10 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_11 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_12 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_13 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_14 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_15 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_16 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_17 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_18 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_19 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_20 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_21 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_22 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_23 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_24 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_25 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_26 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_27 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_28 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_29 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_30 + * @arg @ref LL_RCC_PLLI2SDIVR_DIV_31 + */ +__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetDIVR(void) +{ + return (uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVR)); +} +#endif /* RCC_DCKCFGR_PLLI2SDIVR */ + +/** + * @brief Get division factor for PLLI2S input clock + * @rmtoll PLLCFGR PLLM LL_RCC_PLLI2S_GetDivider\n + * PLLI2SCFGR PLLI2SM LL_RCC_PLLI2S_GetDivider + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLI2SM_DIV_2 + * @arg @ref LL_RCC_PLLI2SM_DIV_3 + * @arg @ref LL_RCC_PLLI2SM_DIV_4 + * @arg @ref LL_RCC_PLLI2SM_DIV_5 + * @arg @ref LL_RCC_PLLI2SM_DIV_6 + * @arg @ref LL_RCC_PLLI2SM_DIV_7 + * @arg @ref LL_RCC_PLLI2SM_DIV_8 + * @arg @ref LL_RCC_PLLI2SM_DIV_9 + * @arg @ref LL_RCC_PLLI2SM_DIV_10 + * @arg @ref LL_RCC_PLLI2SM_DIV_11 + * @arg @ref LL_RCC_PLLI2SM_DIV_12 + * @arg @ref LL_RCC_PLLI2SM_DIV_13 + * @arg @ref LL_RCC_PLLI2SM_DIV_14 + * @arg @ref LL_RCC_PLLI2SM_DIV_15 + * @arg @ref LL_RCC_PLLI2SM_DIV_16 + * @arg @ref LL_RCC_PLLI2SM_DIV_17 + * @arg @ref LL_RCC_PLLI2SM_DIV_18 + * @arg @ref LL_RCC_PLLI2SM_DIV_19 + * @arg @ref LL_RCC_PLLI2SM_DIV_20 + * @arg @ref LL_RCC_PLLI2SM_DIV_21 + * @arg @ref LL_RCC_PLLI2SM_DIV_22 + * @arg @ref LL_RCC_PLLI2SM_DIV_23 + * @arg @ref LL_RCC_PLLI2SM_DIV_24 + * @arg @ref LL_RCC_PLLI2SM_DIV_25 + * @arg @ref LL_RCC_PLLI2SM_DIV_26 + * @arg @ref LL_RCC_PLLI2SM_DIV_27 + * @arg @ref LL_RCC_PLLI2SM_DIV_28 + * @arg @ref LL_RCC_PLLI2SM_DIV_29 + * @arg @ref LL_RCC_PLLI2SM_DIV_30 + * @arg @ref LL_RCC_PLLI2SM_DIV_31 + * @arg @ref LL_RCC_PLLI2SM_DIV_32 + * @arg @ref LL_RCC_PLLI2SM_DIV_33 + * @arg @ref LL_RCC_PLLI2SM_DIV_34 + * @arg @ref LL_RCC_PLLI2SM_DIV_35 + * @arg @ref LL_RCC_PLLI2SM_DIV_36 + * @arg @ref LL_RCC_PLLI2SM_DIV_37 + * @arg @ref LL_RCC_PLLI2SM_DIV_38 + * @arg @ref LL_RCC_PLLI2SM_DIV_39 + * @arg @ref LL_RCC_PLLI2SM_DIV_40 + * @arg @ref LL_RCC_PLLI2SM_DIV_41 + * @arg @ref LL_RCC_PLLI2SM_DIV_42 + * @arg @ref LL_RCC_PLLI2SM_DIV_43 + * @arg @ref LL_RCC_PLLI2SM_DIV_44 + * @arg @ref LL_RCC_PLLI2SM_DIV_45 + * @arg @ref LL_RCC_PLLI2SM_DIV_46 + * @arg @ref LL_RCC_PLLI2SM_DIV_47 + * @arg @ref LL_RCC_PLLI2SM_DIV_48 + * @arg @ref LL_RCC_PLLI2SM_DIV_49 + * @arg @ref LL_RCC_PLLI2SM_DIV_50 + * @arg @ref LL_RCC_PLLI2SM_DIV_51 + * @arg @ref LL_RCC_PLLI2SM_DIV_52 + * @arg @ref LL_RCC_PLLI2SM_DIV_53 + * @arg @ref LL_RCC_PLLI2SM_DIV_54 + * @arg @ref LL_RCC_PLLI2SM_DIV_55 + * @arg @ref LL_RCC_PLLI2SM_DIV_56 + * @arg @ref LL_RCC_PLLI2SM_DIV_57 + * @arg @ref LL_RCC_PLLI2SM_DIV_58 + * @arg @ref LL_RCC_PLLI2SM_DIV_59 + * @arg @ref LL_RCC_PLLI2SM_DIV_60 + * @arg @ref LL_RCC_PLLI2SM_DIV_61 + * @arg @ref LL_RCC_PLLI2SM_DIV_62 + * @arg @ref LL_RCC_PLLI2SM_DIV_63 + */ +__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetDivider(void) +{ +#if defined(RCC_PLLI2SCFGR_PLLI2SM) + return (uint32_t)(READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SM)); +#else + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM)); +#endif /* RCC_PLLI2SCFGR_PLLI2SM */ +} + +/** + * @brief Get the oscillator used as PLL clock source. + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLI2S_GetMainSource\n + * PLLI2SCFGR PLLI2SSRC LL_RCC_PLLI2S_GetMainSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @arg @ref LL_RCC_PLLI2SSOURCE_PIN (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_RCC_PLLI2S_GetMainSource(void) +{ +#if defined(RCC_PLLI2SCFGR_PLLI2SSRC) + uint32_t pllsrc = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC); + uint32_t plli2sssrc0 = READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SSRC); + uint32_t plli2sssrc1 = READ_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SSRC) >> 15U; + return (uint32_t)(pllsrc | plli2sssrc0 | plli2sssrc1); +#else + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC)); +#endif /* RCC_PLLI2SCFGR_PLLI2SSRC */ +} + +/** + * @} + */ +#endif /* RCC_PLLI2S_SUPPORT */ + +#if defined(RCC_PLLSAI_SUPPORT) +/** @defgroup RCC_LL_EF_PLLSAI PLLSAI + * @{ + */ + +/** + * @brief Enable PLLSAI + * @rmtoll CR PLLSAION LL_RCC_PLLSAI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_PLLSAION); +} + +/** + * @brief Disable PLLSAI + * @rmtoll CR PLLSAION LL_RCC_PLLSAI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_PLLSAION); +} + +/** + * @brief Check if PLLSAI Ready + * @rmtoll CR PLLSAIRDY LL_RCC_PLLSAI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI_IsReady(void) +{ + return (READ_BIT(RCC->CR, RCC_CR_PLLSAIRDY) == (RCC_CR_PLLSAIRDY)); +} + +/** + * @brief Configure PLLSAI used for SAI domain clock + * @note PLL Source and PLLM Divider can be written only when PLL, + * PLLI2S and PLLSAI(*) are disabled + * @note PLLN/PLLQ can be written only when PLLSAI is disabled + * @note This can be selected for SAI + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI_ConfigDomain_SAI\n + * PLLCFGR PLLM LL_RCC_PLLSAI_ConfigDomain_SAI\n + * PLLSAICFGR PLLSAIM LL_RCC_PLLSAI_ConfigDomain_SAI\n + * PLLSAICFGR PLLSAIN LL_RCC_PLLSAI_ConfigDomain_SAI\n + * PLLSAICFGR PLLSAIQ LL_RCC_PLLSAI_ConfigDomain_SAI\n + * DCKCFGR PLLSAIDIVQ LL_RCC_PLLSAI_ConfigDomain_SAI + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAIM_DIV_2 + * @arg @ref LL_RCC_PLLSAIM_DIV_3 + * @arg @ref LL_RCC_PLLSAIM_DIV_4 + * @arg @ref LL_RCC_PLLSAIM_DIV_5 + * @arg @ref LL_RCC_PLLSAIM_DIV_6 + * @arg @ref LL_RCC_PLLSAIM_DIV_7 + * @arg @ref LL_RCC_PLLSAIM_DIV_8 + * @arg @ref LL_RCC_PLLSAIM_DIV_9 + * @arg @ref LL_RCC_PLLSAIM_DIV_10 + * @arg @ref LL_RCC_PLLSAIM_DIV_11 + * @arg @ref LL_RCC_PLLSAIM_DIV_12 + * @arg @ref LL_RCC_PLLSAIM_DIV_13 + * @arg @ref LL_RCC_PLLSAIM_DIV_14 + * @arg @ref LL_RCC_PLLSAIM_DIV_15 + * @arg @ref LL_RCC_PLLSAIM_DIV_16 + * @arg @ref LL_RCC_PLLSAIM_DIV_17 + * @arg @ref LL_RCC_PLLSAIM_DIV_18 + * @arg @ref LL_RCC_PLLSAIM_DIV_19 + * @arg @ref LL_RCC_PLLSAIM_DIV_20 + * @arg @ref LL_RCC_PLLSAIM_DIV_21 + * @arg @ref LL_RCC_PLLSAIM_DIV_22 + * @arg @ref LL_RCC_PLLSAIM_DIV_23 + * @arg @ref LL_RCC_PLLSAIM_DIV_24 + * @arg @ref LL_RCC_PLLSAIM_DIV_25 + * @arg @ref LL_RCC_PLLSAIM_DIV_26 + * @arg @ref LL_RCC_PLLSAIM_DIV_27 + * @arg @ref LL_RCC_PLLSAIM_DIV_28 + * @arg @ref LL_RCC_PLLSAIM_DIV_29 + * @arg @ref LL_RCC_PLLSAIM_DIV_30 + * @arg @ref LL_RCC_PLLSAIM_DIV_31 + * @arg @ref LL_RCC_PLLSAIM_DIV_32 + * @arg @ref LL_RCC_PLLSAIM_DIV_33 + * @arg @ref LL_RCC_PLLSAIM_DIV_34 + * @arg @ref LL_RCC_PLLSAIM_DIV_35 + * @arg @ref LL_RCC_PLLSAIM_DIV_36 + * @arg @ref LL_RCC_PLLSAIM_DIV_37 + * @arg @ref LL_RCC_PLLSAIM_DIV_38 + * @arg @ref LL_RCC_PLLSAIM_DIV_39 + * @arg @ref LL_RCC_PLLSAIM_DIV_40 + * @arg @ref LL_RCC_PLLSAIM_DIV_41 + * @arg @ref LL_RCC_PLLSAIM_DIV_42 + * @arg @ref LL_RCC_PLLSAIM_DIV_43 + * @arg @ref LL_RCC_PLLSAIM_DIV_44 + * @arg @ref LL_RCC_PLLSAIM_DIV_45 + * @arg @ref LL_RCC_PLLSAIM_DIV_46 + * @arg @ref LL_RCC_PLLSAIM_DIV_47 + * @arg @ref LL_RCC_PLLSAIM_DIV_48 + * @arg @ref LL_RCC_PLLSAIM_DIV_49 + * @arg @ref LL_RCC_PLLSAIM_DIV_50 + * @arg @ref LL_RCC_PLLSAIM_DIV_51 + * @arg @ref LL_RCC_PLLSAIM_DIV_52 + * @arg @ref LL_RCC_PLLSAIM_DIV_53 + * @arg @ref LL_RCC_PLLSAIM_DIV_54 + * @arg @ref LL_RCC_PLLSAIM_DIV_55 + * @arg @ref LL_RCC_PLLSAIM_DIV_56 + * @arg @ref LL_RCC_PLLSAIM_DIV_57 + * @arg @ref LL_RCC_PLLSAIM_DIV_58 + * @arg @ref LL_RCC_PLLSAIM_DIV_59 + * @arg @ref LL_RCC_PLLSAIM_DIV_60 + * @arg @ref LL_RCC_PLLSAIM_DIV_61 + * @arg @ref LL_RCC_PLLSAIM_DIV_62 + * @arg @ref LL_RCC_PLLSAIM_DIV_63 + * @param PLLN Between 49/50(*) and 432 + * + * (*) value not defined in all devices. + * @param PLLQ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAIQ_DIV_2 + * @arg @ref LL_RCC_PLLSAIQ_DIV_3 + * @arg @ref LL_RCC_PLLSAIQ_DIV_4 + * @arg @ref LL_RCC_PLLSAIQ_DIV_5 + * @arg @ref LL_RCC_PLLSAIQ_DIV_6 + * @arg @ref LL_RCC_PLLSAIQ_DIV_7 + * @arg @ref LL_RCC_PLLSAIQ_DIV_8 + * @arg @ref LL_RCC_PLLSAIQ_DIV_9 + * @arg @ref LL_RCC_PLLSAIQ_DIV_10 + * @arg @ref LL_RCC_PLLSAIQ_DIV_11 + * @arg @ref LL_RCC_PLLSAIQ_DIV_12 + * @arg @ref LL_RCC_PLLSAIQ_DIV_13 + * @arg @ref LL_RCC_PLLSAIQ_DIV_14 + * @arg @ref LL_RCC_PLLSAIQ_DIV_15 + * @param PLLDIVQ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_1 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_2 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_3 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_4 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_5 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_6 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_7 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_8 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_9 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_10 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_11 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_12 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_13 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_14 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_15 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_16 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_17 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_18 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_19 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_20 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_21 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_22 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_23 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_24 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_25 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_26 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_27 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_28 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_29 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_30 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_31 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_32 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ, uint32_t PLLDIVQ) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source); +#if defined(RCC_PLLSAICFGR_PLLSAIM) + MODIFY_REG(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIM, PLLM); +#else + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, PLLM); +#endif /* RCC_PLLSAICFGR_PLLSAIM */ + MODIFY_REG(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIN | RCC_PLLSAICFGR_PLLSAIQ, PLLN << RCC_PLLSAICFGR_PLLSAIN_Pos | PLLQ); + MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVQ, PLLDIVQ); +} + +#if defined(RCC_PLLSAICFGR_PLLSAIP) +/** + * @brief Configure PLLSAI used for 48Mhz domain clock + * @note PLL Source and PLLM Divider can be written only when PLL, + * PLLI2S and PLLSAI(*) are disabled + * @note PLLN/PLLP can be written only when PLLSAI is disabled + * @note This can be selected for USB, RNG, SDIO + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI_ConfigDomain_48M\n + * PLLCFGR PLLM LL_RCC_PLLSAI_ConfigDomain_48M\n + * PLLSAICFGR PLLSAIM LL_RCC_PLLSAI_ConfigDomain_48M\n + * PLLSAICFGR PLLSAIN LL_RCC_PLLSAI_ConfigDomain_48M\n + * PLLSAICFGR PLLSAIP LL_RCC_PLLSAI_ConfigDomain_48M + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAIM_DIV_2 + * @arg @ref LL_RCC_PLLSAIM_DIV_3 + * @arg @ref LL_RCC_PLLSAIM_DIV_4 + * @arg @ref LL_RCC_PLLSAIM_DIV_5 + * @arg @ref LL_RCC_PLLSAIM_DIV_6 + * @arg @ref LL_RCC_PLLSAIM_DIV_7 + * @arg @ref LL_RCC_PLLSAIM_DIV_8 + * @arg @ref LL_RCC_PLLSAIM_DIV_9 + * @arg @ref LL_RCC_PLLSAIM_DIV_10 + * @arg @ref LL_RCC_PLLSAIM_DIV_11 + * @arg @ref LL_RCC_PLLSAIM_DIV_12 + * @arg @ref LL_RCC_PLLSAIM_DIV_13 + * @arg @ref LL_RCC_PLLSAIM_DIV_14 + * @arg @ref LL_RCC_PLLSAIM_DIV_15 + * @arg @ref LL_RCC_PLLSAIM_DIV_16 + * @arg @ref LL_RCC_PLLSAIM_DIV_17 + * @arg @ref LL_RCC_PLLSAIM_DIV_18 + * @arg @ref LL_RCC_PLLSAIM_DIV_19 + * @arg @ref LL_RCC_PLLSAIM_DIV_20 + * @arg @ref LL_RCC_PLLSAIM_DIV_21 + * @arg @ref LL_RCC_PLLSAIM_DIV_22 + * @arg @ref LL_RCC_PLLSAIM_DIV_23 + * @arg @ref LL_RCC_PLLSAIM_DIV_24 + * @arg @ref LL_RCC_PLLSAIM_DIV_25 + * @arg @ref LL_RCC_PLLSAIM_DIV_26 + * @arg @ref LL_RCC_PLLSAIM_DIV_27 + * @arg @ref LL_RCC_PLLSAIM_DIV_28 + * @arg @ref LL_RCC_PLLSAIM_DIV_29 + * @arg @ref LL_RCC_PLLSAIM_DIV_30 + * @arg @ref LL_RCC_PLLSAIM_DIV_31 + * @arg @ref LL_RCC_PLLSAIM_DIV_32 + * @arg @ref LL_RCC_PLLSAIM_DIV_33 + * @arg @ref LL_RCC_PLLSAIM_DIV_34 + * @arg @ref LL_RCC_PLLSAIM_DIV_35 + * @arg @ref LL_RCC_PLLSAIM_DIV_36 + * @arg @ref LL_RCC_PLLSAIM_DIV_37 + * @arg @ref LL_RCC_PLLSAIM_DIV_38 + * @arg @ref LL_RCC_PLLSAIM_DIV_39 + * @arg @ref LL_RCC_PLLSAIM_DIV_40 + * @arg @ref LL_RCC_PLLSAIM_DIV_41 + * @arg @ref LL_RCC_PLLSAIM_DIV_42 + * @arg @ref LL_RCC_PLLSAIM_DIV_43 + * @arg @ref LL_RCC_PLLSAIM_DIV_44 + * @arg @ref LL_RCC_PLLSAIM_DIV_45 + * @arg @ref LL_RCC_PLLSAIM_DIV_46 + * @arg @ref LL_RCC_PLLSAIM_DIV_47 + * @arg @ref LL_RCC_PLLSAIM_DIV_48 + * @arg @ref LL_RCC_PLLSAIM_DIV_49 + * @arg @ref LL_RCC_PLLSAIM_DIV_50 + * @arg @ref LL_RCC_PLLSAIM_DIV_51 + * @arg @ref LL_RCC_PLLSAIM_DIV_52 + * @arg @ref LL_RCC_PLLSAIM_DIV_53 + * @arg @ref LL_RCC_PLLSAIM_DIV_54 + * @arg @ref LL_RCC_PLLSAIM_DIV_55 + * @arg @ref LL_RCC_PLLSAIM_DIV_56 + * @arg @ref LL_RCC_PLLSAIM_DIV_57 + * @arg @ref LL_RCC_PLLSAIM_DIV_58 + * @arg @ref LL_RCC_PLLSAIM_DIV_59 + * @arg @ref LL_RCC_PLLSAIM_DIV_60 + * @arg @ref LL_RCC_PLLSAIM_DIV_61 + * @arg @ref LL_RCC_PLLSAIM_DIV_62 + * @arg @ref LL_RCC_PLLSAIM_DIV_63 + * @param PLLN Between 50 and 432 + * @param PLLP This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAIP_DIV_2 + * @arg @ref LL_RCC_PLLSAIP_DIV_4 + * @arg @ref LL_RCC_PLLSAIP_DIV_6 + * @arg @ref LL_RCC_PLLSAIP_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source); +#if defined(RCC_PLLSAICFGR_PLLSAIM) + MODIFY_REG(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIM, PLLM); +#else + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, PLLM); +#endif /* RCC_PLLSAICFGR_PLLSAIM */ + MODIFY_REG(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIN | RCC_PLLSAICFGR_PLLSAIP, PLLN << RCC_PLLSAICFGR_PLLSAIN_Pos | PLLP); +} +#endif /* RCC_PLLSAICFGR_PLLSAIP */ + +#if defined(LTDC) +/** + * @brief Configure PLLSAI used for LTDC domain clock + * @note PLL Source and PLLM Divider can be written only when PLL, + * PLLI2S and PLLSAI(*) are disabled + * @note PLLN/PLLR can be written only when PLLSAI is disabled + * @note This can be selected for LTDC + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI_ConfigDomain_LTDC\n + * PLLCFGR PLLM LL_RCC_PLLSAI_ConfigDomain_LTDC\n + * PLLSAICFGR PLLSAIN LL_RCC_PLLSAI_ConfigDomain_LTDC\n + * PLLSAICFGR PLLSAIR LL_RCC_PLLSAI_ConfigDomain_LTDC\n + * DCKCFGR PLLSAIDIVR LL_RCC_PLLSAI_ConfigDomain_LTDC + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAIM_DIV_2 + * @arg @ref LL_RCC_PLLSAIM_DIV_3 + * @arg @ref LL_RCC_PLLSAIM_DIV_4 + * @arg @ref LL_RCC_PLLSAIM_DIV_5 + * @arg @ref LL_RCC_PLLSAIM_DIV_6 + * @arg @ref LL_RCC_PLLSAIM_DIV_7 + * @arg @ref LL_RCC_PLLSAIM_DIV_8 + * @arg @ref LL_RCC_PLLSAIM_DIV_9 + * @arg @ref LL_RCC_PLLSAIM_DIV_10 + * @arg @ref LL_RCC_PLLSAIM_DIV_11 + * @arg @ref LL_RCC_PLLSAIM_DIV_12 + * @arg @ref LL_RCC_PLLSAIM_DIV_13 + * @arg @ref LL_RCC_PLLSAIM_DIV_14 + * @arg @ref LL_RCC_PLLSAIM_DIV_15 + * @arg @ref LL_RCC_PLLSAIM_DIV_16 + * @arg @ref LL_RCC_PLLSAIM_DIV_17 + * @arg @ref LL_RCC_PLLSAIM_DIV_18 + * @arg @ref LL_RCC_PLLSAIM_DIV_19 + * @arg @ref LL_RCC_PLLSAIM_DIV_20 + * @arg @ref LL_RCC_PLLSAIM_DIV_21 + * @arg @ref LL_RCC_PLLSAIM_DIV_22 + * @arg @ref LL_RCC_PLLSAIM_DIV_23 + * @arg @ref LL_RCC_PLLSAIM_DIV_24 + * @arg @ref LL_RCC_PLLSAIM_DIV_25 + * @arg @ref LL_RCC_PLLSAIM_DIV_26 + * @arg @ref LL_RCC_PLLSAIM_DIV_27 + * @arg @ref LL_RCC_PLLSAIM_DIV_28 + * @arg @ref LL_RCC_PLLSAIM_DIV_29 + * @arg @ref LL_RCC_PLLSAIM_DIV_30 + * @arg @ref LL_RCC_PLLSAIM_DIV_31 + * @arg @ref LL_RCC_PLLSAIM_DIV_32 + * @arg @ref LL_RCC_PLLSAIM_DIV_33 + * @arg @ref LL_RCC_PLLSAIM_DIV_34 + * @arg @ref LL_RCC_PLLSAIM_DIV_35 + * @arg @ref LL_RCC_PLLSAIM_DIV_36 + * @arg @ref LL_RCC_PLLSAIM_DIV_37 + * @arg @ref LL_RCC_PLLSAIM_DIV_38 + * @arg @ref LL_RCC_PLLSAIM_DIV_39 + * @arg @ref LL_RCC_PLLSAIM_DIV_40 + * @arg @ref LL_RCC_PLLSAIM_DIV_41 + * @arg @ref LL_RCC_PLLSAIM_DIV_42 + * @arg @ref LL_RCC_PLLSAIM_DIV_43 + * @arg @ref LL_RCC_PLLSAIM_DIV_44 + * @arg @ref LL_RCC_PLLSAIM_DIV_45 + * @arg @ref LL_RCC_PLLSAIM_DIV_46 + * @arg @ref LL_RCC_PLLSAIM_DIV_47 + * @arg @ref LL_RCC_PLLSAIM_DIV_48 + * @arg @ref LL_RCC_PLLSAIM_DIV_49 + * @arg @ref LL_RCC_PLLSAIM_DIV_50 + * @arg @ref LL_RCC_PLLSAIM_DIV_51 + * @arg @ref LL_RCC_PLLSAIM_DIV_52 + * @arg @ref LL_RCC_PLLSAIM_DIV_53 + * @arg @ref LL_RCC_PLLSAIM_DIV_54 + * @arg @ref LL_RCC_PLLSAIM_DIV_55 + * @arg @ref LL_RCC_PLLSAIM_DIV_56 + * @arg @ref LL_RCC_PLLSAIM_DIV_57 + * @arg @ref LL_RCC_PLLSAIM_DIV_58 + * @arg @ref LL_RCC_PLLSAIM_DIV_59 + * @arg @ref LL_RCC_PLLSAIM_DIV_60 + * @arg @ref LL_RCC_PLLSAIM_DIV_61 + * @arg @ref LL_RCC_PLLSAIM_DIV_62 + * @arg @ref LL_RCC_PLLSAIM_DIV_63 + * @param PLLN Between 49/50(*) and 432 + * + * (*) value not defined in all devices. + * @param PLLR This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAIR_DIV_2 + * @arg @ref LL_RCC_PLLSAIR_DIV_3 + * @arg @ref LL_RCC_PLLSAIR_DIV_4 + * @arg @ref LL_RCC_PLLSAIR_DIV_5 + * @arg @ref LL_RCC_PLLSAIR_DIV_6 + * @arg @ref LL_RCC_PLLSAIR_DIV_7 + * @param PLLDIVR This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAIDIVR_DIV_2 + * @arg @ref LL_RCC_PLLSAIDIVR_DIV_4 + * @arg @ref LL_RCC_PLLSAIDIVR_DIV_8 + * @arg @ref LL_RCC_PLLSAIDIVR_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI_ConfigDomain_LTDC(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR, uint32_t PLLDIVR) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM); + MODIFY_REG(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIN | RCC_PLLSAICFGR_PLLSAIR, PLLN << RCC_PLLSAICFGR_PLLSAIN_Pos | PLLR); + MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVR, PLLDIVR); +} +#endif /* LTDC */ + +/** + * @brief Get division factor for PLLSAI input clock + * @rmtoll PLLCFGR PLLM LL_RCC_PLLSAI_GetDivider\n + * PLLSAICFGR PLLSAIM LL_RCC_PLLSAI_GetDivider + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSAIM_DIV_2 + * @arg @ref LL_RCC_PLLSAIM_DIV_3 + * @arg @ref LL_RCC_PLLSAIM_DIV_4 + * @arg @ref LL_RCC_PLLSAIM_DIV_5 + * @arg @ref LL_RCC_PLLSAIM_DIV_6 + * @arg @ref LL_RCC_PLLSAIM_DIV_7 + * @arg @ref LL_RCC_PLLSAIM_DIV_8 + * @arg @ref LL_RCC_PLLSAIM_DIV_9 + * @arg @ref LL_RCC_PLLSAIM_DIV_10 + * @arg @ref LL_RCC_PLLSAIM_DIV_11 + * @arg @ref LL_RCC_PLLSAIM_DIV_12 + * @arg @ref LL_RCC_PLLSAIM_DIV_13 + * @arg @ref LL_RCC_PLLSAIM_DIV_14 + * @arg @ref LL_RCC_PLLSAIM_DIV_15 + * @arg @ref LL_RCC_PLLSAIM_DIV_16 + * @arg @ref LL_RCC_PLLSAIM_DIV_17 + * @arg @ref LL_RCC_PLLSAIM_DIV_18 + * @arg @ref LL_RCC_PLLSAIM_DIV_19 + * @arg @ref LL_RCC_PLLSAIM_DIV_20 + * @arg @ref LL_RCC_PLLSAIM_DIV_21 + * @arg @ref LL_RCC_PLLSAIM_DIV_22 + * @arg @ref LL_RCC_PLLSAIM_DIV_23 + * @arg @ref LL_RCC_PLLSAIM_DIV_24 + * @arg @ref LL_RCC_PLLSAIM_DIV_25 + * @arg @ref LL_RCC_PLLSAIM_DIV_26 + * @arg @ref LL_RCC_PLLSAIM_DIV_27 + * @arg @ref LL_RCC_PLLSAIM_DIV_28 + * @arg @ref LL_RCC_PLLSAIM_DIV_29 + * @arg @ref LL_RCC_PLLSAIM_DIV_30 + * @arg @ref LL_RCC_PLLSAIM_DIV_31 + * @arg @ref LL_RCC_PLLSAIM_DIV_32 + * @arg @ref LL_RCC_PLLSAIM_DIV_33 + * @arg @ref LL_RCC_PLLSAIM_DIV_34 + * @arg @ref LL_RCC_PLLSAIM_DIV_35 + * @arg @ref LL_RCC_PLLSAIM_DIV_36 + * @arg @ref LL_RCC_PLLSAIM_DIV_37 + * @arg @ref LL_RCC_PLLSAIM_DIV_38 + * @arg @ref LL_RCC_PLLSAIM_DIV_39 + * @arg @ref LL_RCC_PLLSAIM_DIV_40 + * @arg @ref LL_RCC_PLLSAIM_DIV_41 + * @arg @ref LL_RCC_PLLSAIM_DIV_42 + * @arg @ref LL_RCC_PLLSAIM_DIV_43 + * @arg @ref LL_RCC_PLLSAIM_DIV_44 + * @arg @ref LL_RCC_PLLSAIM_DIV_45 + * @arg @ref LL_RCC_PLLSAIM_DIV_46 + * @arg @ref LL_RCC_PLLSAIM_DIV_47 + * @arg @ref LL_RCC_PLLSAIM_DIV_48 + * @arg @ref LL_RCC_PLLSAIM_DIV_49 + * @arg @ref LL_RCC_PLLSAIM_DIV_50 + * @arg @ref LL_RCC_PLLSAIM_DIV_51 + * @arg @ref LL_RCC_PLLSAIM_DIV_52 + * @arg @ref LL_RCC_PLLSAIM_DIV_53 + * @arg @ref LL_RCC_PLLSAIM_DIV_54 + * @arg @ref LL_RCC_PLLSAIM_DIV_55 + * @arg @ref LL_RCC_PLLSAIM_DIV_56 + * @arg @ref LL_RCC_PLLSAIM_DIV_57 + * @arg @ref LL_RCC_PLLSAIM_DIV_58 + * @arg @ref LL_RCC_PLLSAIM_DIV_59 + * @arg @ref LL_RCC_PLLSAIM_DIV_60 + * @arg @ref LL_RCC_PLLSAIM_DIV_61 + * @arg @ref LL_RCC_PLLSAIM_DIV_62 + * @arg @ref LL_RCC_PLLSAIM_DIV_63 + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetDivider(void) +{ +#if defined(RCC_PLLSAICFGR_PLLSAIM) + return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIM)); +#else + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM)); +#endif /* RCC_PLLSAICFGR_PLLSAIM */ +} + +/** + * @brief Get SAIPLL multiplication factor for VCO + * @rmtoll PLLSAICFGR PLLSAIN LL_RCC_PLLSAI_GetN + * @retval Between 49/50(*) and 432 + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetN(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIN) >> RCC_PLLSAICFGR_PLLSAIN_Pos); +} + +/** + * @brief Get SAIPLL division factor for PLLSAIQ + * @rmtoll PLLSAICFGR PLLSAIQ LL_RCC_PLLSAI_GetQ + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSAIQ_DIV_2 + * @arg @ref LL_RCC_PLLSAIQ_DIV_3 + * @arg @ref LL_RCC_PLLSAIQ_DIV_4 + * @arg @ref LL_RCC_PLLSAIQ_DIV_5 + * @arg @ref LL_RCC_PLLSAIQ_DIV_6 + * @arg @ref LL_RCC_PLLSAIQ_DIV_7 + * @arg @ref LL_RCC_PLLSAIQ_DIV_8 + * @arg @ref LL_RCC_PLLSAIQ_DIV_9 + * @arg @ref LL_RCC_PLLSAIQ_DIV_10 + * @arg @ref LL_RCC_PLLSAIQ_DIV_11 + * @arg @ref LL_RCC_PLLSAIQ_DIV_12 + * @arg @ref LL_RCC_PLLSAIQ_DIV_13 + * @arg @ref LL_RCC_PLLSAIQ_DIV_14 + * @arg @ref LL_RCC_PLLSAIQ_DIV_15 + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetQ(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIQ)); +} + +#if defined(RCC_PLLSAICFGR_PLLSAIR) +/** + * @brief Get SAIPLL division factor for PLLSAIR + * @note used for PLLSAICLK (SAI clock) + * @rmtoll PLLSAICFGR PLLSAIR LL_RCC_PLLSAI_GetR + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSAIR_DIV_2 + * @arg @ref LL_RCC_PLLSAIR_DIV_3 + * @arg @ref LL_RCC_PLLSAIR_DIV_4 + * @arg @ref LL_RCC_PLLSAIR_DIV_5 + * @arg @ref LL_RCC_PLLSAIR_DIV_6 + * @arg @ref LL_RCC_PLLSAIR_DIV_7 + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetR(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIR)); +} +#endif /* RCC_PLLSAICFGR_PLLSAIR */ + +#if defined(RCC_PLLSAICFGR_PLLSAIP) +/** + * @brief Get SAIPLL division factor for PLLSAIP + * @note used for PLL48MCLK (48M domain clock) + * @rmtoll PLLSAICFGR PLLSAIP LL_RCC_PLLSAI_GetP + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSAIP_DIV_2 + * @arg @ref LL_RCC_PLLSAIP_DIV_4 + * @arg @ref LL_RCC_PLLSAIP_DIV_6 + * @arg @ref LL_RCC_PLLSAIP_DIV_8 + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetP(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLSAICFGR, RCC_PLLSAICFGR_PLLSAIP)); +} +#endif /* RCC_PLLSAICFGR_PLLSAIP */ + +/** + * @brief Get SAIPLL division factor for PLLSAIDIVQ + * @note used PLLSAICLK selected (SAI clock) + * @rmtoll DCKCFGR PLLSAIDIVQ LL_RCC_PLLSAI_GetDIVQ + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_1 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_2 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_3 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_4 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_5 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_6 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_7 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_8 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_9 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_10 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_11 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_12 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_13 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_14 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_15 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_16 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_17 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_18 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_19 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_20 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_21 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_22 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_23 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_24 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_25 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_26 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_27 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_28 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_29 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_30 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_31 + * @arg @ref LL_RCC_PLLSAIDIVQ_DIV_32 + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetDIVQ(void) +{ + return (uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVQ)); +} + +#if defined(RCC_DCKCFGR_PLLSAIDIVR) +/** + * @brief Get SAIPLL division factor for PLLSAIDIVR + * @note used for LTDC domain clock + * @rmtoll DCKCFGR PLLSAIDIVR LL_RCC_PLLSAI_GetDIVR + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSAIDIVR_DIV_2 + * @arg @ref LL_RCC_PLLSAIDIVR_DIV_4 + * @arg @ref LL_RCC_PLLSAIDIVR_DIV_8 + * @arg @ref LL_RCC_PLLSAIDIVR_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI_GetDIVR(void) +{ + return (uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVR)); +} +#endif /* RCC_DCKCFGR_PLLSAIDIVR */ + +/** + * @} + */ +#endif /* RCC_PLLSAI_SUPPORT */ + +/** @defgroup RCC_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Clear LSI ready interrupt flag + * @rmtoll CIR LSIRDYC LL_RCC_ClearFlag_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSIRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_LSIRDYC); +} + +/** + * @brief Clear LSE ready interrupt flag + * @rmtoll CIR LSERDYC LL_RCC_ClearFlag_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSERDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_LSERDYC); +} + +/** + * @brief Clear HSI ready interrupt flag + * @rmtoll CIR HSIRDYC LL_RCC_ClearFlag_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSIRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_HSIRDYC); +} + +/** + * @brief Clear HSE ready interrupt flag + * @rmtoll CIR HSERDYC LL_RCC_ClearFlag_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSERDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_HSERDYC); +} + +/** + * @brief Clear PLL ready interrupt flag + * @rmtoll CIR PLLRDYC LL_RCC_ClearFlag_PLLRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_PLLRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_PLLRDYC); +} + +#if defined(RCC_PLLI2S_SUPPORT) +/** + * @brief Clear PLLI2S ready interrupt flag + * @rmtoll CIR PLLI2SRDYC LL_RCC_ClearFlag_PLLI2SRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_PLLI2SRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYC); +} + +#endif /* RCC_PLLI2S_SUPPORT */ + +#if defined(RCC_PLLSAI_SUPPORT) +/** + * @brief Clear PLLSAI ready interrupt flag + * @rmtoll CIR PLLSAIRDYC LL_RCC_ClearFlag_PLLSAIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_PLLSAIRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYC); +} + +#endif /* RCC_PLLSAI_SUPPORT */ + +/** + * @brief Clear Clock security system interrupt flag + * @rmtoll CIR CSSC LL_RCC_ClearFlag_HSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSECSS(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_CSSC); +} + +/** + * @brief Check if LSI ready interrupt occurred or not + * @rmtoll CIR LSIRDYF LL_RCC_IsActiveFlag_LSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSIRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_LSIRDYF) == (RCC_CIR_LSIRDYF)); +} + +/** + * @brief Check if LSE ready interrupt occurred or not + * @rmtoll CIR LSERDYF LL_RCC_IsActiveFlag_LSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSERDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_LSERDYF) == (RCC_CIR_LSERDYF)); +} + +/** + * @brief Check if HSI ready interrupt occurred or not + * @rmtoll CIR HSIRDYF LL_RCC_IsActiveFlag_HSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSIRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_HSIRDYF) == (RCC_CIR_HSIRDYF)); +} + +/** + * @brief Check if HSE ready interrupt occurred or not + * @rmtoll CIR HSERDYF LL_RCC_IsActiveFlag_HSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSERDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_HSERDYF) == (RCC_CIR_HSERDYF)); +} + +/** + * @brief Check if PLL ready interrupt occurred or not + * @rmtoll CIR PLLRDYF LL_RCC_IsActiveFlag_PLLRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_PLLRDYF) == (RCC_CIR_PLLRDYF)); +} + +#if defined(RCC_PLLI2S_SUPPORT) +/** + * @brief Check if PLLI2S ready interrupt occurred or not + * @rmtoll CIR PLLI2SRDYF LL_RCC_IsActiveFlag_PLLI2SRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLI2SRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYF) == (RCC_CIR_PLLI2SRDYF)); +} +#endif /* RCC_PLLI2S_SUPPORT */ + +#if defined(RCC_PLLSAI_SUPPORT) +/** + * @brief Check if PLLSAI ready interrupt occurred or not + * @rmtoll CIR PLLSAIRDYF LL_RCC_IsActiveFlag_PLLSAIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLSAIRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYF) == (RCC_CIR_PLLSAIRDYF)); +} +#endif /* RCC_PLLSAI_SUPPORT */ + +/** + * @brief Check if Clock security system interrupt occurred or not + * @rmtoll CIR CSSF LL_RCC_IsActiveFlag_HSECSS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSECSS(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_CSSF) == (RCC_CIR_CSSF)); +} + +/** + * @brief Check if RCC flag Independent Watchdog reset is set or not. + * @rmtoll CSR IWDGRSTF LL_RCC_IsActiveFlag_IWDGRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_IWDGRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_IWDGRSTF) == (RCC_CSR_IWDGRSTF)); +} + +/** + * @brief Check if RCC flag Low Power reset is set or not. + * @rmtoll CSR LPWRRSTF LL_RCC_IsActiveFlag_LPWRRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LPWRRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_LPWRRSTF) == (RCC_CSR_LPWRRSTF)); +} + +/** + * @brief Check if RCC flag Pin reset is set or not. + * @rmtoll CSR PINRSTF LL_RCC_IsActiveFlag_PINRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PINRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_PINRSTF) == (RCC_CSR_PINRSTF)); +} + +/** + * @brief Check if RCC flag POR/PDR reset is set or not. + * @rmtoll CSR PORRSTF LL_RCC_IsActiveFlag_PORRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PORRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_PORRSTF) == (RCC_CSR_PORRSTF)); +} + +/** + * @brief Check if RCC flag Software reset is set or not. + * @rmtoll CSR SFTRSTF LL_RCC_IsActiveFlag_SFTRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_SFTRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_SFTRSTF) == (RCC_CSR_SFTRSTF)); +} + +/** + * @brief Check if RCC flag Window Watchdog reset is set or not. + * @rmtoll CSR WWDGRSTF LL_RCC_IsActiveFlag_WWDGRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_WWDGRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_WWDGRSTF) == (RCC_CSR_WWDGRSTF)); +} + +#if defined(RCC_CSR_BORRSTF) +/** + * @brief Check if RCC flag BOR reset is set or not. + * @rmtoll CSR BORRSTF LL_RCC_IsActiveFlag_BORRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_BORRST(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_BORRSTF) == (RCC_CSR_BORRSTF)); +} +#endif /* RCC_CSR_BORRSTF */ + +/** + * @brief Set RMVF bit to clear the reset flags. + * @rmtoll CSR RMVF LL_RCC_ClearResetFlags + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearResetFlags(void) +{ + SET_BIT(RCC->CSR, RCC_CSR_RMVF); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_IT_Management IT Management + * @{ + */ + +/** + * @brief Enable LSI ready interrupt + * @rmtoll CIR LSIRDYIE LL_RCC_EnableIT_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSIRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_LSIRDYIE); +} + +/** + * @brief Enable LSE ready interrupt + * @rmtoll CIR LSERDYIE LL_RCC_EnableIT_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSERDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_LSERDYIE); +} + +/** + * @brief Enable HSI ready interrupt + * @rmtoll CIR HSIRDYIE LL_RCC_EnableIT_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSIRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_HSIRDYIE); +} + +/** + * @brief Enable HSE ready interrupt + * @rmtoll CIR HSERDYIE LL_RCC_EnableIT_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSERDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_HSERDYIE); +} + +/** + * @brief Enable PLL ready interrupt + * @rmtoll CIR PLLRDYIE LL_RCC_EnableIT_PLLRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_PLLRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_PLLRDYIE); +} + +#if defined(RCC_PLLI2S_SUPPORT) +/** + * @brief Enable PLLI2S ready interrupt + * @rmtoll CIR PLLI2SRDYIE LL_RCC_EnableIT_PLLI2SRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_PLLI2SRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYIE); +} +#endif /* RCC_PLLI2S_SUPPORT */ + +#if defined(RCC_PLLSAI_SUPPORT) +/** + * @brief Enable PLLSAI ready interrupt + * @rmtoll CIR PLLSAIRDYIE LL_RCC_EnableIT_PLLSAIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_PLLSAIRDY(void) +{ + SET_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYIE); +} +#endif /* RCC_PLLSAI_SUPPORT */ + +/** + * @brief Disable LSI ready interrupt + * @rmtoll CIR LSIRDYIE LL_RCC_DisableIT_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSIRDY(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_LSIRDYIE); +} + +/** + * @brief Disable LSE ready interrupt + * @rmtoll CIR LSERDYIE LL_RCC_DisableIT_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSERDY(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_LSERDYIE); +} + +/** + * @brief Disable HSI ready interrupt + * @rmtoll CIR HSIRDYIE LL_RCC_DisableIT_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSIRDY(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_HSIRDYIE); +} + +/** + * @brief Disable HSE ready interrupt + * @rmtoll CIR HSERDYIE LL_RCC_DisableIT_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSERDY(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_HSERDYIE); +} + +/** + * @brief Disable PLL ready interrupt + * @rmtoll CIR PLLRDYIE LL_RCC_DisableIT_PLLRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_PLLRDY(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_PLLRDYIE); +} + +#if defined(RCC_PLLI2S_SUPPORT) +/** + * @brief Disable PLLI2S ready interrupt + * @rmtoll CIR PLLI2SRDYIE LL_RCC_DisableIT_PLLI2SRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_PLLI2SRDY(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYIE); +} + +#endif /* RCC_PLLI2S_SUPPORT */ + +#if defined(RCC_PLLSAI_SUPPORT) +/** + * @brief Disable PLLSAI ready interrupt + * @rmtoll CIR PLLSAIRDYIE LL_RCC_DisableIT_PLLSAIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_PLLSAIRDY(void) +{ + CLEAR_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYIE); +} +#endif /* RCC_PLLSAI_SUPPORT */ + +/** + * @brief Checks if LSI ready interrupt source is enabled or disabled. + * @rmtoll CIR LSIRDYIE LL_RCC_IsEnabledIT_LSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSIRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_LSIRDYIE) == (RCC_CIR_LSIRDYIE)); +} + +/** + * @brief Checks if LSE ready interrupt source is enabled or disabled. + * @rmtoll CIR LSERDYIE LL_RCC_IsEnabledIT_LSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSERDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_LSERDYIE) == (RCC_CIR_LSERDYIE)); +} + +/** + * @brief Checks if HSI ready interrupt source is enabled or disabled. + * @rmtoll CIR HSIRDYIE LL_RCC_IsEnabledIT_HSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSIRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_HSIRDYIE) == (RCC_CIR_HSIRDYIE)); +} + +/** + * @brief Checks if HSE ready interrupt source is enabled or disabled. + * @rmtoll CIR HSERDYIE LL_RCC_IsEnabledIT_HSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSERDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_HSERDYIE) == (RCC_CIR_HSERDYIE)); +} + +/** + * @brief Checks if PLL ready interrupt source is enabled or disabled. + * @rmtoll CIR PLLRDYIE LL_RCC_IsEnabledIT_PLLRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_PLLRDYIE) == (RCC_CIR_PLLRDYIE)); +} + +#if defined(RCC_PLLI2S_SUPPORT) +/** + * @brief Checks if PLLI2S ready interrupt source is enabled or disabled. + * @rmtoll CIR PLLI2SRDYIE LL_RCC_IsEnabledIT_PLLI2SRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLI2SRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_PLLI2SRDYIE) == (RCC_CIR_PLLI2SRDYIE)); +} + +#endif /* RCC_PLLI2S_SUPPORT */ + +#if defined(RCC_PLLSAI_SUPPORT) +/** + * @brief Checks if PLLSAI ready interrupt source is enabled or disabled. + * @rmtoll CIR PLLSAIRDYIE LL_RCC_IsEnabledIT_PLLSAIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLSAIRDY(void) +{ + return (READ_BIT(RCC->CIR, RCC_CIR_PLLSAIRDYIE) == (RCC_CIR_PLLSAIRDYIE)); +} +#endif /* RCC_PLLSAI_SUPPORT */ + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_EF_Init De-initialization function + * @{ + */ +ErrorStatus LL_RCC_DeInit(void); +/** + * @} + */ + +/** @defgroup RCC_LL_EF_Get_Freq Get system and peripherals clocks frequency functions + * @{ + */ +void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks); +#if defined(FMPI2C1) +uint32_t LL_RCC_GetFMPI2CClockFreq(uint32_t FMPI2CxSource); +#endif /* FMPI2C1 */ +#if defined(LPTIM1) +uint32_t LL_RCC_GetLPTIMClockFreq(uint32_t LPTIMxSource); +#endif /* LPTIM1 */ +#if defined(SAI1) +uint32_t LL_RCC_GetSAIClockFreq(uint32_t SAIxSource); +#endif /* SAI1 */ +#if defined(SDIO) +uint32_t LL_RCC_GetSDIOClockFreq(uint32_t SDIOxSource); +#endif /* SDIO */ +#if defined(RNG) +uint32_t LL_RCC_GetRNGClockFreq(uint32_t RNGxSource); +#endif /* RNG */ +#if defined(USB_OTG_FS) || defined(USB_OTG_HS) +uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource); +#endif /* USB_OTG_FS || USB_OTG_HS */ +#if defined(DFSDM1_Channel0) +uint32_t LL_RCC_GetDFSDMClockFreq(uint32_t DFSDMxSource); +uint32_t LL_RCC_GetDFSDMAudioClockFreq(uint32_t DFSDMxSource); +#endif /* DFSDM1_Channel0 */ +uint32_t LL_RCC_GetI2SClockFreq(uint32_t I2SxSource); +#if defined(CEC) +uint32_t LL_RCC_GetCECClockFreq(uint32_t CECxSource); +#endif /* CEC */ +#if defined(LTDC) +uint32_t LL_RCC_GetLTDCClockFreq(uint32_t LTDCxSource); +#endif /* LTDC */ +#if defined(SPDIFRX) +uint32_t LL_RCC_GetSPDIFRXClockFreq(uint32_t SPDIFRXxSource); +#endif /* SPDIFRX */ +#if defined(DSI) +uint32_t LL_RCC_GetDSIClockFreq(uint32_t DSIxSource); +#endif /* DSI */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RCC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_LL_RCC_H */ + diff --git a/Drivers/stm32f4xx_ll_rng.h b/libs/hal/stm32f4xx_ll_rng.h similarity index 96% rename from Drivers/stm32f4xx_ll_rng.h rename to libs/hal/stm32f4xx_ll_rng.h index 24e75aa..151cb4a 100644 --- a/Drivers/stm32f4xx_ll_rng.h +++ b/libs/hal/stm32f4xx_ll_rng.h @@ -1,335 +1,335 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_rng.h - * @author MCD Application Team - * @brief Header file of RNG LL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_LL_RNG_H -#define STM32F4xx_LL_RNG_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined (RNG) - -/** @defgroup RNG_LL RNG - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup RNG_LL_Exported_Constants RNG Exported Constants - * @{ - */ - - -/** @defgroup RNG_LL_EC_GET_FLAG Get Flags Defines - * @brief Flags defines which can be used with LL_RNG_ReadReg function - * @{ - */ -#define LL_RNG_SR_DRDY RNG_SR_DRDY /*!< Register contains valid random data */ -#define LL_RNG_SR_CECS RNG_SR_CECS /*!< Clock error current status */ -#define LL_RNG_SR_SECS RNG_SR_SECS /*!< Seed error current status */ -#define LL_RNG_SR_CEIS RNG_SR_CEIS /*!< Clock error interrupt status */ -#define LL_RNG_SR_SEIS RNG_SR_SEIS /*!< Seed error interrupt status */ -/** - * @} - */ - -/** @defgroup RNG_LL_EC_IT IT Defines - * @brief IT defines which can be used with LL_RNG_ReadReg and LL_RNG_WriteReg macros - * @{ - */ -#define LL_RNG_CR_IE RNG_CR_IE /*!< RNG Interrupt enable */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup RNG_LL_Exported_Macros RNG Exported Macros - * @{ - */ - -/** @defgroup RNG_LL_EM_WRITE_READ Common Write and read registers Macros - * @{ - */ - -/** - * @brief Write a value in RNG register - * @param __INSTANCE__ RNG Instance - * @param __REG__ Register to be written - * @param __VALUE__ Value to be written in the register - * @retval None - */ -#define LL_RNG_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) - -/** - * @brief Read a value in RNG register - * @param __INSTANCE__ RNG Instance - * @param __REG__ Register to be read - * @retval Register value - */ -#define LL_RNG_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) -/** - * @} - */ - -/** - * @} - */ - - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup RNG_LL_Exported_Functions RNG Exported Functions - * @{ - */ -/** @defgroup RNG_LL_EF_Configuration RNG Configuration functions - * @{ - */ - -/** - * @brief Enable Random Number Generation - * @rmtoll CR RNGEN LL_RNG_Enable - * @param RNGx RNG Instance - * @retval None - */ -__STATIC_INLINE void LL_RNG_Enable(RNG_TypeDef *RNGx) -{ - SET_BIT(RNGx->CR, RNG_CR_RNGEN); -} - -/** - * @brief Disable Random Number Generation - * @rmtoll CR RNGEN LL_RNG_Disable - * @param RNGx RNG Instance - * @retval None - */ -__STATIC_INLINE void LL_RNG_Disable(RNG_TypeDef *RNGx) -{ - CLEAR_BIT(RNGx->CR, RNG_CR_RNGEN); -} - -/** - * @brief Check if Random Number Generator is enabled - * @rmtoll CR RNGEN LL_RNG_IsEnabled - * @param RNGx RNG Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RNG_IsEnabled(RNG_TypeDef *RNGx) -{ - return ((READ_BIT(RNGx->CR, RNG_CR_RNGEN) == (RNG_CR_RNGEN)) ? 1UL : 0UL); -} - -/** - * @} - */ - -/** @defgroup RNG_LL_EF_FLAG_Management FLAG Management - * @{ - */ - -/** - * @brief Indicate if the RNG Data ready Flag is set or not - * @rmtoll SR DRDY LL_RNG_IsActiveFlag_DRDY - * @param RNGx RNG Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_DRDY(RNG_TypeDef *RNGx) -{ - return ((READ_BIT(RNGx->SR, RNG_SR_DRDY) == (RNG_SR_DRDY)) ? 1UL : 0UL); -} - -/** - * @brief Indicate if the Clock Error Current Status Flag is set or not - * @rmtoll SR CECS LL_RNG_IsActiveFlag_CECS - * @param RNGx RNG Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_CECS(RNG_TypeDef *RNGx) -{ - return ((READ_BIT(RNGx->SR, RNG_SR_CECS) == (RNG_SR_CECS)) ? 1UL : 0UL); -} - -/** - * @brief Indicate if the Seed Error Current Status Flag is set or not - * @rmtoll SR SECS LL_RNG_IsActiveFlag_SECS - * @param RNGx RNG Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_SECS(RNG_TypeDef *RNGx) -{ - return ((READ_BIT(RNGx->SR, RNG_SR_SECS) == (RNG_SR_SECS)) ? 1UL : 0UL); -} - -/** - * @brief Indicate if the Clock Error Interrupt Status Flag is set or not - * @rmtoll SR CEIS LL_RNG_IsActiveFlag_CEIS - * @param RNGx RNG Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_CEIS(RNG_TypeDef *RNGx) -{ - return ((READ_BIT(RNGx->SR, RNG_SR_CEIS) == (RNG_SR_CEIS)) ? 1UL : 0UL); -} - -/** - * @brief Indicate if the Seed Error Interrupt Status Flag is set or not - * @rmtoll SR SEIS LL_RNG_IsActiveFlag_SEIS - * @param RNGx RNG Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_SEIS(RNG_TypeDef *RNGx) -{ - return ((READ_BIT(RNGx->SR, RNG_SR_SEIS) == (RNG_SR_SEIS)) ? 1UL : 0UL); -} - -/** - * @brief Clear Clock Error interrupt Status (CEIS) Flag - * @rmtoll SR CEIS LL_RNG_ClearFlag_CEIS - * @param RNGx RNG Instance - * @retval None - */ -__STATIC_INLINE void LL_RNG_ClearFlag_CEIS(RNG_TypeDef *RNGx) -{ - WRITE_REG(RNGx->SR, ~RNG_SR_CEIS); -} - -/** - * @brief Clear Seed Error interrupt Status (SEIS) Flag - * @rmtoll SR SEIS LL_RNG_ClearFlag_SEIS - * @param RNGx RNG Instance - * @retval None - */ -__STATIC_INLINE void LL_RNG_ClearFlag_SEIS(RNG_TypeDef *RNGx) -{ - WRITE_REG(RNGx->SR, ~RNG_SR_SEIS); -} - -/** - * @} - */ - -/** @defgroup RNG_LL_EF_IT_Management IT Management - * @{ - */ - -/** - * @brief Enable Random Number Generator Interrupt - * (applies for either Seed error, Clock Error or Data ready interrupts) - * @rmtoll CR IE LL_RNG_EnableIT - * @param RNGx RNG Instance - * @retval None - */ -__STATIC_INLINE void LL_RNG_EnableIT(RNG_TypeDef *RNGx) -{ - SET_BIT(RNGx->CR, RNG_CR_IE); -} - -/** - * @brief Disable Random Number Generator Interrupt - * (applies for either Seed error, Clock Error or Data ready interrupts) - * @rmtoll CR IE LL_RNG_DisableIT - * @param RNGx RNG Instance - * @retval None - */ -__STATIC_INLINE void LL_RNG_DisableIT(RNG_TypeDef *RNGx) -{ - CLEAR_BIT(RNGx->CR, RNG_CR_IE); -} - -/** - * @brief Check if Random Number Generator Interrupt is enabled - * (applies for either Seed error, Clock Error or Data ready interrupts) - * @rmtoll CR IE LL_RNG_IsEnabledIT - * @param RNGx RNG Instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_RNG_IsEnabledIT(RNG_TypeDef *RNGx) -{ - return ((READ_BIT(RNGx->CR, RNG_CR_IE) == (RNG_CR_IE)) ? 1UL : 0UL); -} - -/** - * @} - */ - -/** @defgroup RNG_LL_EF_Data_Management Data Management - * @{ - */ - -/** - * @brief Return32-bit Random Number value - * @rmtoll DR RNDATA LL_RNG_ReadRandData32 - * @param RNGx RNG Instance - * @retval Generated 32-bit random value - */ -__STATIC_INLINE uint32_t LL_RNG_ReadRandData32(RNG_TypeDef *RNGx) -{ - return (uint32_t)(READ_REG(RNGx->DR)); -} - -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup RNG_LL_EF_Init Initialization and de-initialization functions - * @{ - */ -ErrorStatus LL_RNG_DeInit(RNG_TypeDef *RNGx); - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* RNG */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_RNG_H */ - +/** + ****************************************************************************** + * @file stm32f4xx_ll_rng.h + * @author MCD Application Team + * @brief Header file of RNG LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F4xx_LL_RNG_H +#define STM32F4xx_LL_RNG_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_LL_Driver + * @{ + */ + +#if defined (RNG) + +/** @defgroup RNG_LL RNG + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RNG_LL_Exported_Constants RNG Exported Constants + * @{ + */ + + +/** @defgroup RNG_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_RNG_ReadReg function + * @{ + */ +#define LL_RNG_SR_DRDY RNG_SR_DRDY /*!< Register contains valid random data */ +#define LL_RNG_SR_CECS RNG_SR_CECS /*!< Clock error current status */ +#define LL_RNG_SR_SECS RNG_SR_SECS /*!< Seed error current status */ +#define LL_RNG_SR_CEIS RNG_SR_CEIS /*!< Clock error interrupt status */ +#define LL_RNG_SR_SEIS RNG_SR_SEIS /*!< Seed error interrupt status */ +/** + * @} + */ + +/** @defgroup RNG_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_RNG_ReadReg and LL_RNG_WriteReg macros + * @{ + */ +#define LL_RNG_CR_IE RNG_CR_IE /*!< RNG Interrupt enable */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RNG_LL_Exported_Macros RNG Exported Macros + * @{ + */ + +/** @defgroup RNG_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in RNG register + * @param __INSTANCE__ RNG Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_RNG_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in RNG register + * @param __INSTANCE__ RNG Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_RNG_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RNG_LL_Exported_Functions RNG Exported Functions + * @{ + */ +/** @defgroup RNG_LL_EF_Configuration RNG Configuration functions + * @{ + */ + +/** + * @brief Enable Random Number Generation + * @rmtoll CR RNGEN LL_RNG_Enable + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_Enable(RNG_TypeDef *RNGx) +{ + SET_BIT(RNGx->CR, RNG_CR_RNGEN); +} + +/** + * @brief Disable Random Number Generation + * @rmtoll CR RNGEN LL_RNG_Disable + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_Disable(RNG_TypeDef *RNGx) +{ + CLEAR_BIT(RNGx->CR, RNG_CR_RNGEN); +} + +/** + * @brief Check if Random Number Generator is enabled + * @rmtoll CR RNGEN LL_RNG_IsEnabled + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsEnabled(RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->CR, RNG_CR_RNGEN) == (RNG_CR_RNGEN)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RNG_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Indicate if the RNG Data ready Flag is set or not + * @rmtoll SR DRDY LL_RNG_IsActiveFlag_DRDY + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_DRDY(RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->SR, RNG_SR_DRDY) == (RNG_SR_DRDY)) ? 1UL : 0UL); +} + +/** + * @brief Indicate if the Clock Error Current Status Flag is set or not + * @rmtoll SR CECS LL_RNG_IsActiveFlag_CECS + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_CECS(RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->SR, RNG_SR_CECS) == (RNG_SR_CECS)) ? 1UL : 0UL); +} + +/** + * @brief Indicate if the Seed Error Current Status Flag is set or not + * @rmtoll SR SECS LL_RNG_IsActiveFlag_SECS + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_SECS(RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->SR, RNG_SR_SECS) == (RNG_SR_SECS)) ? 1UL : 0UL); +} + +/** + * @brief Indicate if the Clock Error Interrupt Status Flag is set or not + * @rmtoll SR CEIS LL_RNG_IsActiveFlag_CEIS + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_CEIS(RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->SR, RNG_SR_CEIS) == (RNG_SR_CEIS)) ? 1UL : 0UL); +} + +/** + * @brief Indicate if the Seed Error Interrupt Status Flag is set or not + * @rmtoll SR SEIS LL_RNG_IsActiveFlag_SEIS + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_SEIS(RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->SR, RNG_SR_SEIS) == (RNG_SR_SEIS)) ? 1UL : 0UL); +} + +/** + * @brief Clear Clock Error interrupt Status (CEIS) Flag + * @rmtoll SR CEIS LL_RNG_ClearFlag_CEIS + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_ClearFlag_CEIS(RNG_TypeDef *RNGx) +{ + WRITE_REG(RNGx->SR, ~RNG_SR_CEIS); +} + +/** + * @brief Clear Seed Error interrupt Status (SEIS) Flag + * @rmtoll SR SEIS LL_RNG_ClearFlag_SEIS + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_ClearFlag_SEIS(RNG_TypeDef *RNGx) +{ + WRITE_REG(RNGx->SR, ~RNG_SR_SEIS); +} + +/** + * @} + */ + +/** @defgroup RNG_LL_EF_IT_Management IT Management + * @{ + */ + +/** + * @brief Enable Random Number Generator Interrupt + * (applies for either Seed error, Clock Error or Data ready interrupts) + * @rmtoll CR IE LL_RNG_EnableIT + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_EnableIT(RNG_TypeDef *RNGx) +{ + SET_BIT(RNGx->CR, RNG_CR_IE); +} + +/** + * @brief Disable Random Number Generator Interrupt + * (applies for either Seed error, Clock Error or Data ready interrupts) + * @rmtoll CR IE LL_RNG_DisableIT + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_DisableIT(RNG_TypeDef *RNGx) +{ + CLEAR_BIT(RNGx->CR, RNG_CR_IE); +} + +/** + * @brief Check if Random Number Generator Interrupt is enabled + * (applies for either Seed error, Clock Error or Data ready interrupts) + * @rmtoll CR IE LL_RNG_IsEnabledIT + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsEnabledIT(RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->CR, RNG_CR_IE) == (RNG_CR_IE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RNG_LL_EF_Data_Management Data Management + * @{ + */ + +/** + * @brief Return32-bit Random Number value + * @rmtoll DR RNDATA LL_RNG_ReadRandData32 + * @param RNGx RNG Instance + * @retval Generated 32-bit random value + */ +__STATIC_INLINE uint32_t LL_RNG_ReadRandData32(RNG_TypeDef *RNGx) +{ + return (uint32_t)(READ_REG(RNGx->DR)); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RNG_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +ErrorStatus LL_RNG_DeInit(RNG_TypeDef *RNGx); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* RNG */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_LL_RNG_H */ + diff --git a/Drivers/stm32f4xx_ll_system.h b/libs/hal/stm32f4xx_ll_system.h similarity index 97% rename from Drivers/stm32f4xx_ll_system.h rename to libs/hal/stm32f4xx_ll_system.h index 48bcc1a..84ea5c4 100644 --- a/Drivers/stm32f4xx_ll_system.h +++ b/libs/hal/stm32f4xx_ll_system.h @@ -1,1711 +1,1711 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_system.h - * @author MCD Application Team - * @brief Header file of SYSTEM LL module. - * - ****************************************************************************** - * @attention - * - *Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The LL SYSTEM driver contains a set of generic APIs that can be - used by user: - (+) Some of the FLASH features need to be handled in the SYSTEM file. - (+) Access to DBGCMU registers - (+) Access to SYSCFG registers - - @endverbatim - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_SYSTEM_H -#define __STM32F4xx_LL_SYSTEM_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) - -/** @defgroup SYSTEM_LL SYSTEM - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants - * @{ - */ - -/** @defgroup SYSTEM_LL_EC_REMAP SYSCFG REMAP -* @{ -*/ -#define LL_SYSCFG_REMAP_FLASH (uint32_t)0x00000000 /*!< Main Flash memory mapped at 0x00000000 */ -#define LL_SYSCFG_REMAP_SYSTEMFLASH SYSCFG_MEMRMP_MEM_MODE_0 /*!< System Flash memory mapped at 0x00000000 */ -#if defined(FSMC_Bank1) -#define LL_SYSCFG_REMAP_FSMC SYSCFG_MEMRMP_MEM_MODE_1 /*!< FSMC(NOR/PSRAM 1 and 2) mapped at 0x00000000 */ -#endif /* FSMC_Bank1 */ -#if defined(FMC_Bank1) -#define LL_SYSCFG_REMAP_FMC SYSCFG_MEMRMP_MEM_MODE_1 /*!< FMC(NOR/PSRAM 1 and 2) mapped at 0x00000000 */ -#define LL_SYSCFG_REMAP_SDRAM SYSCFG_MEMRMP_MEM_MODE_2 /*!< FMC/SDRAM mapped at 0x00000000 */ -#endif /* FMC_Bank1 */ -#define LL_SYSCFG_REMAP_SRAM (SYSCFG_MEMRMP_MEM_MODE_1 | SYSCFG_MEMRMP_MEM_MODE_0) /*!< SRAM1 mapped at 0x00000000 */ - -/** - * @} - */ - -#if defined(SYSCFG_PMC_MII_RMII_SEL) - /** @defgroup SYSTEM_LL_EC_PMC SYSCFG PMC -* @{ -*/ -#define LL_SYSCFG_PMC_ETHMII (uint32_t)0x00000000 /*!< ETH Media MII interface */ -#define LL_SYSCFG_PMC_ETHRMII (uint32_t)SYSCFG_PMC_MII_RMII_SEL /*!< ETH Media RMII interface */ - -/** - * @} - */ -#endif /* SYSCFG_PMC_MII_RMII_SEL */ - - - -#if defined(SYSCFG_MEMRMP_UFB_MODE) -/** @defgroup SYSTEM_LL_EC_BANKMODE SYSCFG BANK MODE - * @{ - */ -#define LL_SYSCFG_BANKMODE_BANK1 (uint32_t)0x00000000 /*!< Flash Bank 1 base address mapped at 0x0800 0000 (AXI) and 0x0020 0000 (TCM) - and Flash Bank 2 base address mapped at 0x0810 0000 (AXI) and 0x0030 0000 (TCM)*/ -#define LL_SYSCFG_BANKMODE_BANK2 SYSCFG_MEMRMP_UFB_MODE /*!< Flash Bank 2 base address mapped at 0x0800 0000 (AXI) and 0x0020 0000(TCM) - and Flash Bank 1 base address mapped at 0x0810 0000 (AXI) and 0x0030 0000(TCM) */ -/** - * @} - */ -#endif /* SYSCFG_MEMRMP_UFB_MODE */ -/** @defgroup SYSTEM_LL_EC_I2C_FASTMODEPLUS SYSCFG I2C FASTMODEPLUS - * @{ - */ -#if defined(SYSCFG_CFGR_FMPI2C1_SCL) -#define LL_SYSCFG_I2C_FASTMODEPLUS_SCL SYSCFG_CFGR_FMPI2C1_SCL /*!< Enable Fast Mode Plus on FMPI2C_SCL pin */ -#define LL_SYSCFG_I2C_FASTMODEPLUS_SDA SYSCFG_CFGR_FMPI2C1_SDA /*!< Enable Fast Mode Plus on FMPI2C_SDA pin*/ -#endif /* SYSCFG_CFGR_FMPI2C1_SCL */ -/** - * @} - */ - -/** @defgroup SYSTEM_LL_EC_EXTI_PORT SYSCFG EXTI PORT - * @{ - */ -#define LL_SYSCFG_EXTI_PORTA (uint32_t)0 /*!< EXTI PORT A */ -#define LL_SYSCFG_EXTI_PORTB (uint32_t)1 /*!< EXTI PORT B */ -#define LL_SYSCFG_EXTI_PORTC (uint32_t)2 /*!< EXTI PORT C */ -#define LL_SYSCFG_EXTI_PORTD (uint32_t)3 /*!< EXTI PORT D */ -#define LL_SYSCFG_EXTI_PORTE (uint32_t)4 /*!< EXTI PORT E */ -#if defined(GPIOF) -#define LL_SYSCFG_EXTI_PORTF (uint32_t)5 /*!< EXTI PORT F */ -#endif /* GPIOF */ -#if defined(GPIOG) -#define LL_SYSCFG_EXTI_PORTG (uint32_t)6 /*!< EXTI PORT G */ -#endif /* GPIOG */ -#define LL_SYSCFG_EXTI_PORTH (uint32_t)7 /*!< EXTI PORT H */ -#if defined(GPIOI) -#define LL_SYSCFG_EXTI_PORTI (uint32_t)8 /*!< EXTI PORT I */ -#endif /* GPIOI */ -#if defined(GPIOJ) -#define LL_SYSCFG_EXTI_PORTJ (uint32_t)9 /*!< EXTI PORT J */ -#endif /* GPIOJ */ -#if defined(GPIOK) -#define LL_SYSCFG_EXTI_PORTK (uint32_t)10 /*!< EXTI PORT k */ -#endif /* GPIOK */ -/** - * @} - */ - -/** @defgroup SYSTEM_LL_EC_EXTI_LINE SYSCFG EXTI LINE - * @{ - */ -#define LL_SYSCFG_EXTI_LINE0 (uint32_t)(0x000FU << 16 | 0) /*!< EXTI_POSITION_0 | EXTICR[0] */ -#define LL_SYSCFG_EXTI_LINE1 (uint32_t)(0x00F0U << 16 | 0) /*!< EXTI_POSITION_4 | EXTICR[0] */ -#define LL_SYSCFG_EXTI_LINE2 (uint32_t)(0x0F00U << 16 | 0) /*!< EXTI_POSITION_8 | EXTICR[0] */ -#define LL_SYSCFG_EXTI_LINE3 (uint32_t)(0xF000U << 16 | 0) /*!< EXTI_POSITION_12 | EXTICR[0] */ -#define LL_SYSCFG_EXTI_LINE4 (uint32_t)(0x000FU << 16 | 1) /*!< EXTI_POSITION_0 | EXTICR[1] */ -#define LL_SYSCFG_EXTI_LINE5 (uint32_t)(0x00F0U << 16 | 1) /*!< EXTI_POSITION_4 | EXTICR[1] */ -#define LL_SYSCFG_EXTI_LINE6 (uint32_t)(0x0F00U << 16 | 1) /*!< EXTI_POSITION_8 | EXTICR[1] */ -#define LL_SYSCFG_EXTI_LINE7 (uint32_t)(0xF000U << 16 | 1) /*!< EXTI_POSITION_12 | EXTICR[1] */ -#define LL_SYSCFG_EXTI_LINE8 (uint32_t)(0x000FU << 16 | 2) /*!< EXTI_POSITION_0 | EXTICR[2] */ -#define LL_SYSCFG_EXTI_LINE9 (uint32_t)(0x00F0U << 16 | 2) /*!< EXTI_POSITION_4 | EXTICR[2] */ -#define LL_SYSCFG_EXTI_LINE10 (uint32_t)(0x0F00U << 16 | 2) /*!< EXTI_POSITION_8 | EXTICR[2] */ -#define LL_SYSCFG_EXTI_LINE11 (uint32_t)(0xF000U << 16 | 2) /*!< EXTI_POSITION_12 | EXTICR[2] */ -#define LL_SYSCFG_EXTI_LINE12 (uint32_t)(0x000FU << 16 | 3) /*!< EXTI_POSITION_0 | EXTICR[3] */ -#define LL_SYSCFG_EXTI_LINE13 (uint32_t)(0x00F0U << 16 | 3) /*!< EXTI_POSITION_4 | EXTICR[3] */ -#define LL_SYSCFG_EXTI_LINE14 (uint32_t)(0x0F00U << 16 | 3) /*!< EXTI_POSITION_8 | EXTICR[3] */ -#define LL_SYSCFG_EXTI_LINE15 (uint32_t)(0xF000U << 16 | 3) /*!< EXTI_POSITION_12 | EXTICR[3] */ -/** - * @} - */ - -/** @defgroup SYSTEM_LL_EC_TIMBREAK SYSCFG TIMER BREAK - * @{ - */ -#if defined(SYSCFG_CFGR2_LOCKUP_LOCK) -#define LL_SYSCFG_TIMBREAK_LOCKUP SYSCFG_CFGR2_LOCKUP_LOCK /*!< Enables and locks the LOCKUP output of CortexM4 - with Break Input of TIM1/8 */ -#define LL_SYSCFG_TIMBREAK_PVD SYSCFG_CFGR2_PVD_LOCK /*!< Enables and locks the PVD connection with TIM1/8 Break Input - and also the PVDE and PLS bits of the Power Control Interface */ -#endif /* SYSCFG_CFGR2_CLL */ -/** - * @} - */ - -#if defined(SYSCFG_MCHDLYCR_BSCKSEL) -/** @defgroup SYSTEM_LL_DFSDM_BitStream_ClockSource SYSCFG MCHDLY BCKKSEL - * @{ - */ -#define LL_SYSCFG_BITSTREAM_CLOCK_TIM2OC1 (uint32_t)0x00000000 -#define LL_SYSCFG_BITSTREAM_CLOCK_DFSDM2 SYSCFG_MCHDLYCR_BSCKSEL -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM_MCHDLYEN SYSCFG MCHDLY MCHDLYEN - * @{ - */ -#define LL_SYSCFG_DFSDM1_MCHDLYEN SYSCFG_MCHDLYCR_MCHDLY1EN -#define LL_SYSCFG_DFSDM2_MCHDLYEN SYSCFG_MCHDLYCR_MCHDLY2EN -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM_DataIn0_Source SYSCFG MCHDLY DFSDMD0SEL - * @{ - */ -#define LL_SYSCFG_DFSDM1_DataIn0 SYSCFG_MCHDLYCR_DFSDM1D0SEL -#define LL_SYSCFG_DFSDM2_DataIn0 SYSCFG_MCHDLYCR_DFSDM2D0SEL - -#define LL_SYSCFG_DFSDM1_DataIn0_PAD (uint32_t)((SYSCFG_MCHDLYCR_DFSDM1D0SEL << 16) | 0x00000000) -#define LL_SYSCFG_DFSDM1_DataIn0_DM (uint32_t)((SYSCFG_MCHDLYCR_DFSDM1D0SEL << 16) | SYSCFG_MCHDLYCR_DFSDM1D0SEL) -#define LL_SYSCFG_DFSDM2_DataIn0_PAD (uint32_t)((SYSCFG_MCHDLYCR_DFSDM2D0SEL << 16) | 0x00000000) -#define LL_SYSCFG_DFSDM2_DataIn0_DM (uint32_t)((SYSCFG_MCHDLYCR_DFSDM2D0SEL << 16) | SYSCFG_MCHDLYCR_DFSDM2D0SEL) -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM_DataIn2_Source SYSCFG MCHDLY DFSDMD2SEL - * @{ - */ -#define LL_SYSCFG_DFSDM1_DataIn2 SYSCFG_MCHDLYCR_DFSDM1D2SEL -#define LL_SYSCFG_DFSDM2_DataIn2 SYSCFG_MCHDLYCR_DFSDM2D2SEL - -#define LL_SYSCFG_DFSDM1_DataIn2_PAD (uint32_t)((SYSCFG_MCHDLYCR_DFSDM1D2SEL << 16) | 0x00000000) -#define LL_SYSCFG_DFSDM1_DataIn2_DM (uint32_t)((SYSCFG_MCHDLYCR_DFSDM1D2SEL << 16) | SYSCFG_MCHDLYCR_DFSDM1D2SEL) -#define LL_SYSCFG_DFSDM2_DataIn2_PAD (uint32_t)((SYSCFG_MCHDLYCR_DFSDM2D2SEL << 16) | 0x00000000) -#define LL_SYSCFG_DFSDM2_DataIn2_DM (uint32_t)((SYSCFG_MCHDLYCR_DFSDM2D2SEL << 16) | SYSCFG_MCHDLYCR_DFSDM2D2SEL) -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM1_TIM4OC2_BitstreamDistribution SYSCFG MCHDLY DFSDM1CK02SEL - * @{ - */ -#define LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN0 (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN2 SYSCFG_MCHDLYCR_DFSDM1CK02SEL -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM1_TIM4OC1_BitstreamDistribution SYSCFG MCHDLY DFSDM1CK13SEL - * @{ - */ -#define LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN1 (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN3 SYSCFG_MCHDLYCR_DFSDM1CK13SEL -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM1_CLKIN_SourceSelection SYSCFG MCHDLY DFSDMCFG - * @{ - */ -#define LL_SYSCFG_DFSDM1_CKIN_PAD (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM1_CKIN_DM SYSCFG_MCHDLYCR_DFSDM1CFG -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM1_CLKOUT_SourceSelection SYSCFG MCHDLY DFSDM1CKOSEL - * @{ - */ -#define LL_SYSCFG_DFSDM1_CKOUT (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM1_CKOUT_M27 SYSCFG_MCHDLYCR_DFSDM1CKOSEL -/** - * @} - */ - -/** @defgroup SYSTEM_LL_DFSDM2_DataIn4_SourceSelection SYSCFG MCHDLY DFSDM2D4SEL - * @{ - */ -#define LL_SYSCFG_DFSDM2_DataIn4_PAD (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM2_DataIn4_DM SYSCFG_MCHDLYCR_DFSDM2D4SEL -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM2_DataIn6_SourceSelection SYSCFG MCHDLY DFSDM2D6SEL - * @{ - */ -#define LL_SYSCFG_DFSDM2_DataIn6_PAD (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM2_DataIn6_DM SYSCFG_MCHDLYCR_DFSDM2D6SEL -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM2_TIM3OC4_BitstreamDistribution SYSCFG MCHDLY DFSDM2CK04SEL - * @{ - */ -#define LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN0 (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN4 SYSCFG_MCHDLYCR_DFSDM2CK04SEL -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM2_TIM3OC3_BitstreamDistribution SYSCFG MCHDLY DFSDM2CK15SEL - * @{ - */ -#define LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN1 (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN5 SYSCFG_MCHDLYCR_DFSDM2CK15SEL -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM2_TIM3OC2_BitstreamDistribution SYSCFG MCHDLY DFSDM2CK26SEL - * @{ - */ -#define LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN2 (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN6 SYSCFG_MCHDLYCR_DFSDM2CK26SEL -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM2_TIM3OC1_BitstreamDistribution SYSCFG MCHDLY DFSDM2CK37SEL - * @{ - */ -#define LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN3 (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN7 SYSCFG_MCHDLYCR_DFSDM2CK37SEL -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM2_CLKIN_SourceSelection SYSCFG MCHDLY DFSDM2CFG - * @{ - */ -#define LL_SYSCFG_DFSDM2_CKIN_PAD (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM2_CKIN_DM SYSCFG_MCHDLYCR_DFSDM2CFG -/** - * @} - */ -/** @defgroup SYSTEM_LL_DFSDM2_CLKOUT_SourceSelection SYSCFG MCHDLY DFSDM2CKOSEL - * @{ - */ -#define LL_SYSCFG_DFSDM2_CKOUT (uint32_t)0x00000000 -#define LL_SYSCFG_DFSDM2_CKOUT_M27 SYSCFG_MCHDLYCR_DFSDM2CKOSEL -/** - * @} - */ -#endif /* SYSCFG_MCHDLYCR_BSCKSEL */ - -/** @defgroup SYSTEM_LL_EC_TRACE DBGMCU TRACE Pin Assignment - * @{ - */ -#define LL_DBGMCU_TRACE_NONE 0x00000000U /*!< TRACE pins not assigned (default state) */ -#define LL_DBGMCU_TRACE_ASYNCH DBGMCU_CR_TRACE_IOEN /*!< TRACE pin assignment for Asynchronous Mode */ -#define LL_DBGMCU_TRACE_SYNCH_SIZE1 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_0) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 1 */ -#define LL_DBGMCU_TRACE_SYNCH_SIZE2 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_1) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 2 */ -#define LL_DBGMCU_TRACE_SYNCH_SIZE4 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 4 */ -/** - * @} - */ - -/** @defgroup SYSTEM_LL_EC_APB1_GRP1_STOP_IP DBGMCU APB1 GRP1 STOP IP - * @{ - */ -#if defined(DBGMCU_APB1_FZ_DBG_TIM2_STOP) -#define LL_DBGMCU_APB1_GRP1_TIM2_STOP DBGMCU_APB1_FZ_DBG_TIM2_STOP /*!< TIM2 counter stopped when core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_TIM2_STOP */ -#if defined(DBGMCU_APB1_FZ_DBG_TIM3_STOP) -#define LL_DBGMCU_APB1_GRP1_TIM3_STOP DBGMCU_APB1_FZ_DBG_TIM3_STOP /*!< TIM3 counter stopped when core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_TIM3_STOP */ -#if defined(DBGMCU_APB1_FZ_DBG_TIM4_STOP) -#define LL_DBGMCU_APB1_GRP1_TIM4_STOP DBGMCU_APB1_FZ_DBG_TIM4_STOP /*!< TIM4 counter stopped when core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_TIM4_STOP */ -#define LL_DBGMCU_APB1_GRP1_TIM5_STOP DBGMCU_APB1_FZ_DBG_TIM5_STOP /*!< TIM5 counter stopped when core is halted */ -#if defined(DBGMCU_APB1_FZ_DBG_TIM6_STOP) -#define LL_DBGMCU_APB1_GRP1_TIM6_STOP DBGMCU_APB1_FZ_DBG_TIM6_STOP /*!< TIM6 counter stopped when core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_TIM6_STOP */ -#if defined(DBGMCU_APB1_FZ_DBG_TIM7_STOP) -#define LL_DBGMCU_APB1_GRP1_TIM7_STOP DBGMCU_APB1_FZ_DBG_TIM7_STOP /*!< TIM7 counter stopped when core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_TIM7_STOP */ -#if defined(DBGMCU_APB1_FZ_DBG_TIM12_STOP) -#define LL_DBGMCU_APB1_GRP1_TIM12_STOP DBGMCU_APB1_FZ_DBG_TIM12_STOP /*!< TIM12 counter stopped when core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_TIM12_STOP */ -#if defined(DBGMCU_APB1_FZ_DBG_TIM13_STOP) -#define LL_DBGMCU_APB1_GRP1_TIM13_STOP DBGMCU_APB1_FZ_DBG_TIM13_STOP /*!< TIM13 counter stopped when core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_TIM13_STOP */ -#if defined(DBGMCU_APB1_FZ_DBG_TIM14_STOP) -#define LL_DBGMCU_APB1_GRP1_TIM14_STOP DBGMCU_APB1_FZ_DBG_TIM14_STOP /*!< TIM14 counter stopped when core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_TIM14_STOP */ -#if defined(DBGMCU_APB1_FZ_DBG_LPTIM_STOP) -#define LL_DBGMCU_APB1_GRP1_LPTIM_STOP DBGMCU_APB1_FZ_DBG_LPTIM_STOP /*!< LPTIM counter stopped when core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_LPTIM_STOP */ -#define LL_DBGMCU_APB1_GRP1_RTC_STOP DBGMCU_APB1_FZ_DBG_RTC_STOP /*!< RTC counter stopped when core is halted */ -#define LL_DBGMCU_APB1_GRP1_WWDG_STOP DBGMCU_APB1_FZ_DBG_WWDG_STOP /*!< Debug Window Watchdog stopped when Core is halted */ -#define LL_DBGMCU_APB1_GRP1_IWDG_STOP DBGMCU_APB1_FZ_DBG_IWDG_STOP /*!< Debug Independent Watchdog stopped when Core is halted */ -#define LL_DBGMCU_APB1_GRP1_I2C1_STOP DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT /*!< I2C1 SMBUS timeout mode stopped when Core is halted */ -#define LL_DBGMCU_APB1_GRP1_I2C2_STOP DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT /*!< I2C2 SMBUS timeout mode stopped when Core is halted */ -#if defined(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT) -#define LL_DBGMCU_APB1_GRP1_I2C3_STOP DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT /*!< I2C3 SMBUS timeout mode stopped when Core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT */ -#if defined(DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT) -#define LL_DBGMCU_APB1_GRP1_I2C4_STOP DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT /*!< I2C4 SMBUS timeout mode stopped when Core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT */ -#if defined(DBGMCU_APB1_FZ_DBG_CAN1_STOP) -#define LL_DBGMCU_APB1_GRP1_CAN1_STOP DBGMCU_APB1_FZ_DBG_CAN1_STOP /*!< CAN1 debug stopped when Core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_CAN1_STOP */ -#if defined(DBGMCU_APB1_FZ_DBG_CAN2_STOP) -#define LL_DBGMCU_APB1_GRP1_CAN2_STOP DBGMCU_APB1_FZ_DBG_CAN2_STOP /*!< CAN2 debug stopped when Core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_CAN2_STOP */ -#if defined(DBGMCU_APB1_FZ_DBG_CAN3_STOP) -#define LL_DBGMCU_APB1_GRP1_CAN3_STOP DBGMCU_APB1_FZ_DBG_CAN3_STOP /*!< CAN3 debug stopped when Core is halted */ -#endif /* DBGMCU_APB1_FZ_DBG_CAN3_STOP */ -/** - * @} - */ - -/** @defgroup SYSTEM_LL_EC_APB2_GRP1_STOP_IP DBGMCU APB2 GRP1 STOP IP - * @{ - */ -#define LL_DBGMCU_APB2_GRP1_TIM1_STOP DBGMCU_APB2_FZ_DBG_TIM1_STOP /*!< TIM1 counter stopped when core is halted */ -#if defined(DBGMCU_APB2_FZ_DBG_TIM8_STOP) -#define LL_DBGMCU_APB2_GRP1_TIM8_STOP DBGMCU_APB2_FZ_DBG_TIM8_STOP /*!< TIM8 counter stopped when core is halted */ -#endif /* DBGMCU_APB2_FZ_DBG_TIM8_STOP */ -#define LL_DBGMCU_APB2_GRP1_TIM9_STOP DBGMCU_APB2_FZ_DBG_TIM9_STOP /*!< TIM9 counter stopped when core is halted */ -#if defined(DBGMCU_APB2_FZ_DBG_TIM10_STOP) -#define LL_DBGMCU_APB2_GRP1_TIM10_STOP DBGMCU_APB2_FZ_DBG_TIM10_STOP /*!< TIM10 counter stopped when core is halted */ -#endif /* DBGMCU_APB2_FZ_DBG_TIM10_STOP */ -#define LL_DBGMCU_APB2_GRP1_TIM11_STOP DBGMCU_APB2_FZ_DBG_TIM11_STOP /*!< TIM11 counter stopped when core is halted */ -/** - * @} - */ - -/** @defgroup SYSTEM_LL_EC_LATENCY FLASH LATENCY - * @{ - */ -#define LL_FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero wait state */ -#define LL_FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One wait state */ -#define LL_FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two wait states */ -#define LL_FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three wait states */ -#define LL_FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four wait states */ -#define LL_FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH five wait state */ -#define LL_FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH six wait state */ -#define LL_FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH seven wait states */ -#define LL_FLASH_LATENCY_8 FLASH_ACR_LATENCY_8WS /*!< FLASH eight wait states */ -#define LL_FLASH_LATENCY_9 FLASH_ACR_LATENCY_9WS /*!< FLASH nine wait states */ -#define LL_FLASH_LATENCY_10 FLASH_ACR_LATENCY_10WS /*!< FLASH ten wait states */ -#define LL_FLASH_LATENCY_11 FLASH_ACR_LATENCY_11WS /*!< FLASH eleven wait states */ -#define LL_FLASH_LATENCY_12 FLASH_ACR_LATENCY_12WS /*!< FLASH twelve wait states */ -#define LL_FLASH_LATENCY_13 FLASH_ACR_LATENCY_13WS /*!< FLASH thirteen wait states */ -#define LL_FLASH_LATENCY_14 FLASH_ACR_LATENCY_14WS /*!< FLASH fourteen wait states */ -#define LL_FLASH_LATENCY_15 FLASH_ACR_LATENCY_15WS /*!< FLASH fifteen wait states */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup SYSTEM_LL_Exported_Functions SYSTEM Exported Functions - * @{ - */ - -/** @defgroup SYSTEM_LL_EF_SYSCFG SYSCFG - * @{ - */ -/** - * @brief Set memory mapping at address 0x00000000 - * @rmtoll SYSCFG_MEMRMP MEM_MODE LL_SYSCFG_SetRemapMemory - * @param Memory This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_REMAP_FLASH - * @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH - * @arg @ref LL_SYSCFG_REMAP_SRAM - * @arg @ref LL_SYSCFG_REMAP_FSMC (*) - * @arg @ref LL_SYSCFG_REMAP_FMC (*) - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_SetRemapMemory(uint32_t Memory) -{ - MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, Memory); -} - -/** - * @brief Get memory mapping at address 0x00000000 - * @rmtoll SYSCFG_MEMRMP MEM_MODE LL_SYSCFG_GetRemapMemory - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_REMAP_FLASH - * @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH - * @arg @ref LL_SYSCFG_REMAP_SRAM - * @arg @ref LL_SYSCFG_REMAP_FSMC (*) - * @arg @ref LL_SYSCFG_REMAP_FMC (*) - */ -__STATIC_INLINE uint32_t LL_SYSCFG_GetRemapMemory(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE)); -} - -#if defined(SYSCFG_MEMRMP_SWP_FMC) -/** - * @brief Enables the FMC Memory Mapping Swapping - * @rmtoll SYSCFG_MEMRMP SWP_FMC LL_SYSCFG_EnableFMCMemorySwapping - * @note SDRAM is accessible at 0x60000000 and NOR/RAM - * is accessible at 0xC0000000 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_EnableFMCMemorySwapping(void) -{ - SET_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FMC_0); -} - -/** - * @brief Disables the FMC Memory Mapping Swapping - * @rmtoll SYSCFG_MEMRMP SWP_FMC LL_SYSCFG_DisableFMCMemorySwapping - * @note SDRAM is accessible at 0xC0000000 (default mapping) - * and NOR/RAM is accessible at 0x60000000 (default mapping) - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DisableFMCMemorySwapping(void) -{ - CLEAR_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FMC); -} - -#endif /* SYSCFG_MEMRMP_SWP_FMC */ -/** - * @brief Enables the Compensation cell Power Down - * @rmtoll SYSCFG_CMPCR CMP_PD LL_SYSCFG_EnableCompensationCell - * @note The I/O compensation cell can be used only when the device supply - * voltage ranges from 2.4 to 3.6 V - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_EnableCompensationCell(void) -{ - SET_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_CMP_PD); -} - -/** - * @brief Disables the Compensation cell Power Down - * @rmtoll SYSCFG_CMPCR CMP_PD LL_SYSCFG_DisableCompensationCell - * @note The I/O compensation cell can be used only when the device supply - * voltage ranges from 2.4 to 3.6 V - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DisableCompensationCell(void) -{ - CLEAR_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_CMP_PD); -} - -/** - * @brief Get Compensation Cell ready Flag - * @rmtoll SYSCFG_CMPCR READY LL_SYSCFG_IsActiveFlag_CMPCR - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_CMPCR(void) -{ - return (READ_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_READY) == (SYSCFG_CMPCR_READY)); -} - -#if defined(SYSCFG_PMC_MII_RMII_SEL) -/** - * @brief Select Ethernet PHY interface - * @rmtoll SYSCFG_PMC MII_RMII_SEL LL_SYSCFG_SetPHYInterface - * @param Interface This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_PMC_ETHMII - * @arg @ref LL_SYSCFG_PMC_ETHRMII - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_SetPHYInterface(uint32_t Interface) -{ - MODIFY_REG(SYSCFG->PMC, SYSCFG_PMC_MII_RMII_SEL, Interface); -} - -/** - * @brief Get Ethernet PHY interface - * @rmtoll SYSCFG_PMC MII_RMII_SEL LL_SYSCFG_GetPHYInterface - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_PMC_ETHMII - * @arg @ref LL_SYSCFG_PMC_ETHRMII - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_GetPHYInterface(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->PMC, SYSCFG_PMC_MII_RMII_SEL)); -} -#endif /* SYSCFG_PMC_MII_RMII_SEL */ - - - -#if defined(SYSCFG_MEMRMP_UFB_MODE) -/** - * @brief Select Flash bank mode (Bank flashed at 0x08000000) - * @rmtoll SYSCFG_MEMRMP UFB_MODE LL_SYSCFG_SetFlashBankMode - * @param Bank This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_BANKMODE_BANK1 - * @arg @ref LL_SYSCFG_BANKMODE_BANK2 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_SetFlashBankMode(uint32_t Bank) -{ - MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_UFB_MODE, Bank); -} - -/** - * @brief Get Flash bank mode (Bank flashed at 0x08000000) - * @rmtoll SYSCFG_MEMRMP UFB_MODE LL_SYSCFG_GetFlashBankMode - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_BANKMODE_BANK1 - * @arg @ref LL_SYSCFG_BANKMODE_BANK2 - */ -__STATIC_INLINE uint32_t LL_SYSCFG_GetFlashBankMode(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_UFB_MODE)); -} -#endif /* SYSCFG_MEMRMP_UFB_MODE */ - -#if defined(SYSCFG_CFGR_FMPI2C1_SCL) -/** - * @brief Enable the I2C fast mode plus driving capability. - * @rmtoll SYSCFG_CFGR FMPI2C1_SCL LL_SYSCFG_EnableFastModePlus\n - * SYSCFG_CFGR FMPI2C1_SDA LL_SYSCFG_EnableFastModePlus - * @param ConfigFastModePlus This parameter can be a combination of the following values: - * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_SCL - * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_SDA - * (*) value not defined in all devices - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_EnableFastModePlus(uint32_t ConfigFastModePlus) -{ - SET_BIT(SYSCFG->CFGR, ConfigFastModePlus); -} - -/** - * @brief Disable the I2C fast mode plus driving capability. - * @rmtoll SYSCFG_CFGR FMPI2C1_SCL LL_SYSCFG_DisableFastModePlus\n - * SYSCFG_CFGR FMPI2C1_SDA LL_SYSCFG_DisableFastModePlus\n - * @param ConfigFastModePlus This parameter can be a combination of the following values: - * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_SCL - * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_SDA - * (*) value not defined in all devices - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DisableFastModePlus(uint32_t ConfigFastModePlus) -{ - CLEAR_BIT(SYSCFG->CFGR, ConfigFastModePlus); -} -#endif /* SYSCFG_CFGR_FMPI2C1_SCL */ - -/** - * @brief Configure source input for the EXTI external interrupt. - * @rmtoll SYSCFG_EXTICR1 EXTIx LL_SYSCFG_SetEXTISource\n - * SYSCFG_EXTICR2 EXTIx LL_SYSCFG_SetEXTISource\n - * SYSCFG_EXTICR3 EXTIx LL_SYSCFG_SetEXTISource\n - * SYSCFG_EXTICR4 EXTIx LL_SYSCFG_SetEXTISource - * @param Port This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_EXTI_PORTA - * @arg @ref LL_SYSCFG_EXTI_PORTB - * @arg @ref LL_SYSCFG_EXTI_PORTC - * @arg @ref LL_SYSCFG_EXTI_PORTD - * @arg @ref LL_SYSCFG_EXTI_PORTE - * @arg @ref LL_SYSCFG_EXTI_PORTF (*) - * @arg @ref LL_SYSCFG_EXTI_PORTG (*) - * @arg @ref LL_SYSCFG_EXTI_PORTH - * - * (*) value not defined in all devices - * @param Line This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_EXTI_LINE0 - * @arg @ref LL_SYSCFG_EXTI_LINE1 - * @arg @ref LL_SYSCFG_EXTI_LINE2 - * @arg @ref LL_SYSCFG_EXTI_LINE3 - * @arg @ref LL_SYSCFG_EXTI_LINE4 - * @arg @ref LL_SYSCFG_EXTI_LINE5 - * @arg @ref LL_SYSCFG_EXTI_LINE6 - * @arg @ref LL_SYSCFG_EXTI_LINE7 - * @arg @ref LL_SYSCFG_EXTI_LINE8 - * @arg @ref LL_SYSCFG_EXTI_LINE9 - * @arg @ref LL_SYSCFG_EXTI_LINE10 - * @arg @ref LL_SYSCFG_EXTI_LINE11 - * @arg @ref LL_SYSCFG_EXTI_LINE12 - * @arg @ref LL_SYSCFG_EXTI_LINE13 - * @arg @ref LL_SYSCFG_EXTI_LINE14 - * @arg @ref LL_SYSCFG_EXTI_LINE15 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_SetEXTISource(uint32_t Port, uint32_t Line) -{ - MODIFY_REG(SYSCFG->EXTICR[Line & 0xFF], (Line >> 16), Port << POSITION_VAL((Line >> 16))); -} - -/** - * @brief Get the configured defined for specific EXTI Line - * @rmtoll SYSCFG_EXTICR1 EXTIx LL_SYSCFG_GetEXTISource\n - * SYSCFG_EXTICR2 EXTIx LL_SYSCFG_GetEXTISource\n - * SYSCFG_EXTICR3 EXTIx LL_SYSCFG_GetEXTISource\n - * SYSCFG_EXTICR4 EXTIx LL_SYSCFG_GetEXTISource - * @param Line This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_EXTI_LINE0 - * @arg @ref LL_SYSCFG_EXTI_LINE1 - * @arg @ref LL_SYSCFG_EXTI_LINE2 - * @arg @ref LL_SYSCFG_EXTI_LINE3 - * @arg @ref LL_SYSCFG_EXTI_LINE4 - * @arg @ref LL_SYSCFG_EXTI_LINE5 - * @arg @ref LL_SYSCFG_EXTI_LINE6 - * @arg @ref LL_SYSCFG_EXTI_LINE7 - * @arg @ref LL_SYSCFG_EXTI_LINE8 - * @arg @ref LL_SYSCFG_EXTI_LINE9 - * @arg @ref LL_SYSCFG_EXTI_LINE10 - * @arg @ref LL_SYSCFG_EXTI_LINE11 - * @arg @ref LL_SYSCFG_EXTI_LINE12 - * @arg @ref LL_SYSCFG_EXTI_LINE13 - * @arg @ref LL_SYSCFG_EXTI_LINE14 - * @arg @ref LL_SYSCFG_EXTI_LINE15 - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_EXTI_PORTA - * @arg @ref LL_SYSCFG_EXTI_PORTB - * @arg @ref LL_SYSCFG_EXTI_PORTC - * @arg @ref LL_SYSCFG_EXTI_PORTD - * @arg @ref LL_SYSCFG_EXTI_PORTE - * @arg @ref LL_SYSCFG_EXTI_PORTF (*) - * @arg @ref LL_SYSCFG_EXTI_PORTG (*) - * @arg @ref LL_SYSCFG_EXTI_PORTH - * (*) value not defined in all devices - */ -__STATIC_INLINE uint32_t LL_SYSCFG_GetEXTISource(uint32_t Line) -{ - return (uint32_t)(READ_BIT(SYSCFG->EXTICR[Line & 0xFF], (Line >> 16)) >> POSITION_VAL(Line >> 16)); -} - -#if defined(SYSCFG_CFGR2_LOCKUP_LOCK) -/** - * @brief Set connections to TIM1/8 break inputs - * @rmtoll SYSCFG_CFGR2 LockUp Lock LL_SYSCFG_SetTIMBreakInputs \n - * SYSCFG_CFGR2 PVD Lock LL_SYSCFG_SetTIMBreakInputs - * @param Break This parameter can be a combination of the following values: - * @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP - * @arg @ref LL_SYSCFG_TIMBREAK_PVD - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_SetTIMBreakInputs(uint32_t Break) -{ - MODIFY_REG(SYSCFG->CFGR2, SYSCFG_CFGR2_LOCKUP_LOCK | SYSCFG_CFGR2_PVD_LOCK, Break); -} - -/** - * @brief Get connections to TIM1/8 Break inputs - * @rmtoll SYSCFG_CFGR2 LockUp Lock LL_SYSCFG_SetTIMBreakInputs \n - * SYSCFG_CFGR2 PVD Lock LL_SYSCFG_SetTIMBreakInputs - * @retval Returned value can be can be a combination of the following values: - * @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP - * @arg @ref LL_SYSCFG_TIMBREAK_PVD - */ -__STATIC_INLINE uint32_t LL_SYSCFG_GetTIMBreakInputs(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_LOCKUP_LOCK | SYSCFG_CFGR2_PVD_LOCK)); -} -#endif /* SYSCFG_CFGR2_LOCKUP_LOCK */ -#if defined(SYSCFG_MCHDLYCR_BSCKSEL) -/** - * @brief Select the DFSDM2 or TIM2_OC1 as clock source for the bitstream clock. - * @rmtoll SYSCFG_MCHDLYCR BSCKSEL LL_SYSCFG_DFSDM_SetBitstreamClockSourceSelection - * @param ClockSource This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_BITSTREAM_CLOCK_DFSDM2 - * @arg @ref LL_SYSCFG_BITSTREAM_CLOCK_TIM2OC1 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM_SetBitstreamClockSourceSelection(uint32_t ClockSource) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_BSCKSEL, ClockSource); -} -/** - * @brief Get the DFSDM2 or TIM2_OC1 as clock source for the bitstream clock. - * @rmtoll SYSCFG_MCHDLYCR BSCKSEL LL_SYSCFG_DFSDM_GetBitstreamClockSourceSelection - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_BITSTREAM_CLOCK_DFSDM2 - * @arg @ref LL_SYSCFG_BITSTREAM_CLOCK_TIM2OC1 - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM_GetBitstreamClockSourceSelection(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_BSCKSEL)); -} -/** - * @brief Enables the DFSDM1 or DFSDM2 Delay clock - * @rmtoll SYSCFG_MCHDLYCR MCHDLYEN LL_SYSCFG_DFSDM_EnableDelayClock - * @param MCHDLY This parameter can be one of the following values - * @arg @ref LL_SYSCFG_DFSDM1_MCHDLYEN - * @arg @ref LL_SYSCFG_DFSDM2_MCHDLYEN - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM_EnableDelayClock(uint32_t MCHDLY) -{ - SET_BIT(SYSCFG->MCHDLYCR, MCHDLY); -} - -/** - * @brief Disables the DFSDM1 or the DFSDM2 Delay clock - * @rmtoll SYSCFG_MCHDLYCR MCHDLY1EN LL_SYSCFG_DFSDM1_DisableDelayClock - * @param MCHDLY This parameter can be one of the following values - * @arg @ref LL_SYSCFG_DFSDM1_MCHDLYEN - * @arg @ref LL_SYSCFG_DFSDM2_MCHDLYEN - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM_DisableDelayClock(uint32_t MCHDLY) -{ - CLEAR_BIT(SYSCFG->MCHDLYCR, MCHDLY); -} - -/** - * @brief Select the source for DFSDM1 or DFSDM2 DatIn0 - * @rmtoll SYSCFG_MCHDLYCR DFSDMD0SEL LL_SYSCFG_DFSDM_SetDataIn0Source - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_DataIn0_PAD - * @arg @ref LL_SYSCFG_DFSDM1_DataIn0_DM - * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_DM - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM_SetDataIn0Source(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, (Source >> 16), (Source & 0x0000FFFF)); -} -/** - * @brief Get the source for DFSDM1 or DFSDM2 DatIn0. - * @rmtoll SYSCFG_MCHDLYCR DFSDMD0SEL LL_SYSCFG_DFSDM_GetDataIn0Source - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_DataIn0 - * @arg @ref LL_SYSCFG_DFSDM2_DataIn0 - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_DataIn0_PAD - * @arg @ref LL_SYSCFG_DFSDM1_DataIn0_DM - * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_DM - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM_GetDataIn0Source(uint32_t Source) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, Source)); -} -/** - * @brief Select the source for DFSDM1 or DFSDM2 DatIn2 - * @rmtoll SYSCFG_MCHDLYCR DFSDMD2SEL LL_SYSCFG_DFSDM_SetDataIn2Source - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_DataIn2_PAD - * @arg @ref LL_SYSCFG_DFSDM1_DataIn2_DM - * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_DM - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM_SetDataIn2Source(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, (Source >> 16), (Source & 0x0000FFFF)); -} -/** - * @brief Get the source for DFSDM1 or DFSDM2 DatIn2. - * @rmtoll SYSCFG_MCHDLYCR DFSDMD2SEL LL_SYSCFG_DFSDM_GetDataIn2Source - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_DataIn2 - * @arg @ref LL_SYSCFG_DFSDM2_DataIn2 - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_DataIn2_PAD - * @arg @ref LL_SYSCFG_DFSDM1_DataIn2_DM - * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_DM - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM_GetDataIn2Source(uint32_t Source) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, Source)); -} - -/** - * @brief Select the distribution of the bitsream lock gated by TIM4 OC2 - * @rmtoll SYSCFG_MCHDLYCR DFSDM1CK02SEL LL_SYSCFG_DFSDM1_SetTIM4OC2BitStreamDistribution - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN0 - * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN2 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM1_SetTIM4OC2BitStreamDistribution(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CK02SEL, Source); -} -/** - * @brief Get the distribution of the bitsream lock gated by TIM4 OC2 - * @rmtoll SYSCFG_MCHDLYCR DFSDM1D2SEL LL_SYSCFG_DFSDM1_GetTIM4OC2BitStreamDistribution - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN0 - * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN2 - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM1_GetTIM4OC2BitStreamDistribution(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CK02SEL)); -} - -/** - * @brief Select the distribution of the bitsream lock gated by TIM4 OC1 - * @rmtoll SYSCFG_MCHDLYCR DFSDM1CK13SEL LL_SYSCFG_DFSDM1_SetTIM4OC1BitStreamDistribution - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN1 - * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN3 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM1_SetTIM4OC1BitStreamDistribution(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CK13SEL, Source); -} -/** - * @brief Get the distribution of the bitsream lock gated by TIM4 OC1 - * @rmtoll SYSCFG_MCHDLYCR DFSDM1D2SEL LL_SYSCFG_DFSDM1_GetTIM4OC1BitStreamDistribution - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN1 - * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN3 - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM1_GetTIM4OC1BitStreamDistribution(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CK13SEL)); -} - -/** - * @brief Select the DFSDM1 Clock In - * @rmtoll SYSCFG_MCHDLYCR DFSDM1CFG LL_SYSCFG_DFSDM1_SetClockInSourceSelection - * @param ClockSource This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_CKIN_PAD - * @arg @ref LL_SYSCFG_DFSDM1_CKIN_DM - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM1_SetClockInSourceSelection(uint32_t ClockSource) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CFG, ClockSource); -} -/** - * @brief GET the DFSDM1 Clock In - * @rmtoll SYSCFG_MCHDLYCR DFSDM1CFG LL_SYSCFG_DFSDM1_GetClockInSourceSelection - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_CKIN_PAD - * @arg @ref LL_SYSCFG_DFSDM1_CKIN_DM - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM1_GetClockInSourceSelection(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CFG)); -} - -/** - * @brief Select the DFSDM1 Clock Out - * @rmtoll SYSCFG_MCHDLYCR DFSDM1CKOSEL LL_SYSCFG_DFSDM1_SetClockOutSourceSelection - * @param ClockSource This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_CKOUT - * @arg @ref LL_SYSCFG_DFSDM1_CKOUT_M27 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM1_SetClockOutSourceSelection(uint32_t ClockSource) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CKOSEL, ClockSource); -} -/** - * @brief GET the DFSDM1 Clock Out - * @rmtoll SYSCFG_MCHDLYCR DFSDM1CKOSEL LL_SYSCFG_DFSDM1_GetClockOutSourceSelection - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM1_CKOUT - * @arg @ref LL_SYSCFG_DFSDM1_CKOUT_M27 - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM1_GetClockOutSourceSelection(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CKOSEL)); -} - -/** - * @brief Enables the DFSDM2 Delay clock - * @rmtoll SYSCFG_MCHDLYCR MCHDLY2EN LL_SYSCFG_DFSDM2_EnableDelayClock - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_EnableDelayClock(void) -{ - SET_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_MCHDLY2EN); -} - -/** - * @brief Disables the DFSDM2 Delay clock - * @rmtoll SYSCFG_MCHDLYCR MCHDLY2EN LL_SYSCFG_DFSDM2_DisableDelayClock - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_DisableDelayClock(void) -{ - CLEAR_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_MCHDLY2EN); -} -/** - * @brief Select the source for DFSDM2 DatIn0 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2D0SEL LL_SYSCFG_DFSDM2_SetDataIn0Source - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_DM - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetDataIn0Source(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D0SEL, Source); -} -/** - * @brief Get the source for DFSDM2 DatIn0. - * @rmtoll SYSCFG_MCHDLYCR DFSDM2D0SEL LL_SYSCFG_DFSDM2_GetDataIn0Source - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_DM - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetDataIn0Source(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D0SEL)); -} - -/** - * @brief Select the source for DFSDM2 DatIn2 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2D2SEL LL_SYSCFG_DFSDM2_SetDataIn2Source - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_DM - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetDataIn2Source(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D2SEL, Source); -} -/** - * @brief Get the source for DFSDM2 DatIn2. - * @rmtoll SYSCFG_MCHDLYCR DFSDM2D2SEL LL_SYSCFG_DFSDM2_GetDataIn2Source - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_DM - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetDataIn2Source(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D2SEL)); -} - -/** - * @brief Select the source for DFSDM2 DatIn4 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2D4SEL LL_SYSCFG_DFSDM2_SetDataIn4Source - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_DataIn4_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn4_DM - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetDataIn4Source(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D4SEL, Source); -} -/** - * @brief Get the source for DFSDM2 DatIn4. - * @rmtoll SYSCFG_MCHDLYCR DFSDM2D4SEL LL_SYSCFG_DFSDM2_GetDataIn4Source - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_DataIn4_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn4_DM - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetDataIn4Source(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D4SEL)); -} - -/** - * @brief Select the source for DFSDM2 DatIn6 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2D6SEL LL_SYSCFG_DFSDM2_SetDataIn6Source - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_DataIn6_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn6_DM - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetDataIn6Source(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D6SEL, Source); -} -/** - * @brief Get the source for DFSDM2 DatIn6. - * @rmtoll SYSCFG_MCHDLYCR DFSDM2D6SEL LL_SYSCFG_DFSDM2_GetDataIn6Source - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_DataIn6_PAD - * @arg @ref LL_SYSCFG_DFSDM2_DataIn6_DM - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetDataIn6Source(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D6SEL)); -} - -/** - * @brief Select the distribution of the bitsream lock gated by TIM3 OC4 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK04SEL LL_SYSCFG_DFSDM2_SetTIM3OC4BitStreamDistribution - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN0 - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN4 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetTIM3OC4BitStreamDistribution(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK04SEL, Source); -} -/** - * @brief Get the distribution of the bitsream lock gated by TIM3 OC4 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK04SEL LL_SYSCFG_DFSDM2_GetTIM3OC4BitStreamDistribution - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN0 - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN4 - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetTIM3OC4BitStreamDistribution(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK04SEL)); -} - -/** - * @brief Select the distribution of the bitsream lock gated by TIM3 OC3 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK15SEL LL_SYSCFG_DFSDM2_SetTIM3OC3BitStreamDistribution - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN1 - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN5 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetTIM3OC3BitStreamDistribution(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK15SEL, Source); -} -/** - * @brief Get the distribution of the bitsream lock gated by TIM3 OC4 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK04SEL LL_SYSCFG_DFSDM2_GetTIM3OC3BitStreamDistribution - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN1 - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN5 - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetTIM3OC3BitStreamDistribution(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK15SEL)); -} - -/** - * @brief Select the distribution of the bitsream lock gated by TIM3 OC2 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK26SEL LL_SYSCFG_DFSDM2_SetTIM3OC2BitStreamDistribution - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN2 - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN6 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetTIM3OC2BitStreamDistribution(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK26SEL, Source); -} -/** - * @brief Get the distribution of the bitsream lock gated by TIM3 OC2 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK04SEL LL_SYSCFG_DFSDM2_GetTIM3OC2BitStreamDistribution - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN2 - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN6 - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetTIM3OC2BitStreamDistribution(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK26SEL)); -} - -/** - * @brief Select the distribution of the bitsream lock gated by TIM3 OC1 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK37SEL LL_SYSCFG_DFSDM2_SetTIM3OC1BitStreamDistribution - * @param Source This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN3 - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN7 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetTIM3OC1BitStreamDistribution(uint32_t Source) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK37SEL, Source); -} -/** - * @brief Get the distribution of the bitsream lock gated by TIM3 OC1 - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK37SEL LL_SYSCFG_DFSDM2_GetTIM3OC1BitStreamDistribution - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN3 - * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN7 - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetTIM3OC1BitStreamDistribution(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK37SEL)); -} - -/** - * @brief Select the DFSDM2 Clock In - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CFG LL_SYSCFG_DFSDM2_SetClockInSourceSelection - * @param ClockSource This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_CKIN_PAD - * @arg @ref LL_SYSCFG_DFSDM2_CKIN_DM - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetClockInSourceSelection(uint32_t ClockSource) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CFG, ClockSource); -} -/** - * @brief GET the DFSDM2 Clock In - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CFG LL_SYSCFG_DFSDM2_GetClockInSourceSelection - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_CKIN_PAD - * @arg @ref LL_SYSCFG_DFSDM2_CKIN_DM - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetClockInSourceSelection(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CFG)); -} - -/** - * @brief Select the DFSDM2 Clock Out - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CKOSEL LL_SYSCFG_DFSDM2_SetClockOutSourceSelection - * @param ClockSource This parameter can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_CKOUT - * @arg @ref LL_SYSCFG_DFSDM2_CKOUT_M27 - * @retval None - */ -__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetClockOutSourceSelection(uint32_t ClockSource) -{ - MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CKOSEL, ClockSource); -} -/** - * @brief GET the DFSDM2 Clock Out - * @rmtoll SYSCFG_MCHDLYCR DFSDM2CKOSEL LL_SYSCFG_DFSDM2_GetClockOutSourceSelection - * @retval Returned value can be one of the following values: - * @arg @ref LL_SYSCFG_DFSDM2_CKOUT - * @arg @ref LL_SYSCFG_DFSDM2_CKOUT_M27 - * @retval None - */ -__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetClockOutSourceSelection(void) -{ - return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CKOSEL)); -} - -#endif /* SYSCFG_MCHDLYCR_BSCKSEL */ -/** - * @} - */ - - -/** @defgroup SYSTEM_LL_EF_DBGMCU DBGMCU - * @{ - */ - -/** - * @brief Return the device identifier - * @note For STM32F405/407xx and STM32F415/417xx devices, the device ID is 0x413 - * @note For STM32F42xxx and STM32F43xxx devices, the device ID is 0x419 - * @note For STM32F401xx devices, the device ID is 0x423 - * @note For STM32F401xx devices, the device ID is 0x433 - * @note For STM32F411xx devices, the device ID is 0x431 - * @note For STM32F410xx devices, the device ID is 0x458 - * @note For STM32F412xx devices, the device ID is 0x441 - * @note For STM32F413xx and STM32423xx devices, the device ID is 0x463 - * @note For STM32F446xx devices, the device ID is 0x421 - * @note For STM32F469xx and STM32F479xx devices, the device ID is 0x434 - * @rmtoll DBGMCU_IDCODE DEV_ID LL_DBGMCU_GetDeviceID - * @retval Values between Min_Data=0x00 and Max_Data=0xFFF - */ -__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID(void) -{ - return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_DEV_ID)); -} - -/** - * @brief Return the device revision identifier - * @note This field indicates the revision of the device. - For example, it is read as RevA -> 0x1000, Cat 2 revZ -> 0x1001, rev1 -> 0x1003, rev2 ->0x1007, revY -> 0x100F for STM32F405/407xx and STM32F415/417xx devices - For example, it is read as RevA -> 0x1000, Cat 2 revY -> 0x1003, rev1 -> 0x1007, rev3 ->0x2001 for STM32F42xxx and STM32F43xxx devices - For example, it is read as RevZ -> 0x1000, Cat 2 revA -> 0x1001 for STM32F401xB/C devices - For example, it is read as RevA -> 0x1000, Cat 2 revZ -> 0x1001 for STM32F401xD/E devices - For example, it is read as RevA -> 0x1000 for STM32F411xx,STM32F413/423xx,STM32F469/423xx, STM32F446xx and STM32F410xx devices - For example, it is read as RevZ -> 0x1001, Cat 2 revB -> 0x2000, revC -> 0x3000 for STM32F412xx devices - * @rmtoll DBGMCU_IDCODE REV_ID LL_DBGMCU_GetRevisionID - * @retval Values between Min_Data=0x00 and Max_Data=0xFFFF - */ -__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void) -{ - return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_REV_ID) >> DBGMCU_IDCODE_REV_ID_Pos); -} - -/** - * @brief Enable the Debug Module during SLEEP mode - * @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_EnableDBGSleepMode - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_EnableDBGSleepMode(void) -{ - SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); -} - -/** - * @brief Disable the Debug Module during SLEEP mode - * @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_DisableDBGSleepMode - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_DisableDBGSleepMode(void) -{ - CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); -} - -/** - * @brief Enable the Debug Module during STOP mode - * @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_EnableDBGStopMode - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode(void) -{ - SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); -} - -/** - * @brief Disable the Debug Module during STOP mode - * @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_DisableDBGStopMode - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode(void) -{ - CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); -} - -/** - * @brief Enable the Debug Module during STANDBY mode - * @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_EnableDBGStandbyMode - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_EnableDBGStandbyMode(void) -{ - SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); -} - -/** - * @brief Disable the Debug Module during STANDBY mode - * @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_DisableDBGStandbyMode - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_DisableDBGStandbyMode(void) -{ - CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); -} - -/** - * @brief Set Trace pin assignment control - * @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_SetTracePinAssignment\n - * DBGMCU_CR TRACE_MODE LL_DBGMCU_SetTracePinAssignment - * @param PinAssignment This parameter can be one of the following values: - * @arg @ref LL_DBGMCU_TRACE_NONE - * @arg @ref LL_DBGMCU_TRACE_ASYNCH - * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1 - * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2 - * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4 - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_SetTracePinAssignment(uint32_t PinAssignment) -{ - MODIFY_REG(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE, PinAssignment); -} - -/** - * @brief Get Trace pin assignment control - * @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_GetTracePinAssignment\n - * DBGMCU_CR TRACE_MODE LL_DBGMCU_GetTracePinAssignment - * @retval Returned value can be one of the following values: - * @arg @ref LL_DBGMCU_TRACE_NONE - * @arg @ref LL_DBGMCU_TRACE_ASYNCH - * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1 - * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2 - * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4 - */ -__STATIC_INLINE uint32_t LL_DBGMCU_GetTracePinAssignment(void) -{ - return (uint32_t)(READ_BIT(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE)); -} - -/** - * @brief Freeze APB1 peripherals (group1 peripherals) - * @rmtoll DBGMCU_APB1_FZ DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM5_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM12_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM13_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM14_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_LPTIM_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_I2C3_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_I2C4_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_CAN1_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_CAN2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n - * DBGMCU_APB1_FZ DBG_CAN3_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_I2C4_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_CAN1_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_CAN3_STOP (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs) -{ - SET_BIT(DBGMCU->APB1FZ, Periphs); -} - -/** - * @brief Unfreeze APB1 peripherals (group1 peripherals) - * @rmtoll DBGMCU_APB1_FZ DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM5_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM12_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM13_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_TIM14_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_LPTIM_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_I2C3_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_I2C4_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_CAN1_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_CAN2_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n - * DBGMCU_APB1_FZ DBG_CAN3_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP - * @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_I2C4_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_CAN1_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP (*) - * @arg @ref LL_DBGMCU_APB1_GRP1_CAN3_STOP (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs) -{ - CLEAR_BIT(DBGMCU->APB1FZ, Periphs); -} - -/** - * @brief Freeze APB2 peripherals - * @rmtoll DBGMCU_APB2_FZ DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n - * DBGMCU_APB2_FZ DBG_TIM8_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n - * DBGMCU_APB2_FZ DBG_TIM9_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n - * DBGMCU_APB2_FZ DBG_TIM10_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n - * DBGMCU_APB2_FZ DBG_TIM11_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP (*) - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP (*) - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP (*) - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_FreezePeriph(uint32_t Periphs) -{ - SET_BIT(DBGMCU->APB2FZ, Periphs); -} - -/** - * @brief Unfreeze APB2 peripherals - * @rmtoll DBGMCU_APB2_FZ DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n - * DBGMCU_APB2_FZ DBG_TIM8_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n - * DBGMCU_APB2_FZ DBG_TIM9_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n - * DBGMCU_APB2_FZ DBG_TIM10_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n - * DBGMCU_APB2_FZ DBG_TIM11_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph - * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP (*) - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP (*) - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP (*) - * @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP (*) - * - * (*) value not defined in all devices. - * @retval None - */ -__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_UnFreezePeriph(uint32_t Periphs) -{ - CLEAR_BIT(DBGMCU->APB2FZ, Periphs); -} -/** - * @} - */ - -/** @defgroup SYSTEM_LL_EF_FLASH FLASH - * @{ - */ - -/** - * @brief Set FLASH Latency - * @rmtoll FLASH_ACR LATENCY LL_FLASH_SetLatency - * @param Latency This parameter can be one of the following values: - * @arg @ref LL_FLASH_LATENCY_0 - * @arg @ref LL_FLASH_LATENCY_1 - * @arg @ref LL_FLASH_LATENCY_2 - * @arg @ref LL_FLASH_LATENCY_3 - * @arg @ref LL_FLASH_LATENCY_4 - * @arg @ref LL_FLASH_LATENCY_5 - * @arg @ref LL_FLASH_LATENCY_6 - * @arg @ref LL_FLASH_LATENCY_7 - * @arg @ref LL_FLASH_LATENCY_8 - * @arg @ref LL_FLASH_LATENCY_9 - * @arg @ref LL_FLASH_LATENCY_10 - * @arg @ref LL_FLASH_LATENCY_11 - * @arg @ref LL_FLASH_LATENCY_12 - * @arg @ref LL_FLASH_LATENCY_13 - * @arg @ref LL_FLASH_LATENCY_14 - * @arg @ref LL_FLASH_LATENCY_15 - * @retval None - */ -__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency) -{ - MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency); -} - -/** - * @brief Get FLASH Latency - * @rmtoll FLASH_ACR LATENCY LL_FLASH_GetLatency - * @retval Returned value can be one of the following values: - * @arg @ref LL_FLASH_LATENCY_0 - * @arg @ref LL_FLASH_LATENCY_1 - * @arg @ref LL_FLASH_LATENCY_2 - * @arg @ref LL_FLASH_LATENCY_3 - * @arg @ref LL_FLASH_LATENCY_4 - * @arg @ref LL_FLASH_LATENCY_5 - * @arg @ref LL_FLASH_LATENCY_6 - * @arg @ref LL_FLASH_LATENCY_7 - * @arg @ref LL_FLASH_LATENCY_8 - * @arg @ref LL_FLASH_LATENCY_9 - * @arg @ref LL_FLASH_LATENCY_10 - * @arg @ref LL_FLASH_LATENCY_11 - * @arg @ref LL_FLASH_LATENCY_12 - * @arg @ref LL_FLASH_LATENCY_13 - * @arg @ref LL_FLASH_LATENCY_14 - * @arg @ref LL_FLASH_LATENCY_15 - */ -__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void) -{ - return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY)); -} - -/** - * @brief Enable Prefetch - * @rmtoll FLASH_ACR PRFTEN LL_FLASH_EnablePrefetch - * @retval None - */ -__STATIC_INLINE void LL_FLASH_EnablePrefetch(void) -{ - SET_BIT(FLASH->ACR, FLASH_ACR_PRFTEN); -} - -/** - * @brief Disable Prefetch - * @rmtoll FLASH_ACR PRFTEN LL_FLASH_DisablePrefetch - * @retval None - */ -__STATIC_INLINE void LL_FLASH_DisablePrefetch(void) -{ - CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTEN); -} - -/** - * @brief Check if Prefetch buffer is enabled - * @rmtoll FLASH_ACR PRFTEN LL_FLASH_IsPrefetchEnabled - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_FLASH_IsPrefetchEnabled(void) -{ - return (READ_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) == (FLASH_ACR_PRFTEN)); -} - -/** - * @brief Enable Instruction cache - * @rmtoll FLASH_ACR ICEN LL_FLASH_EnableInstCache - * @retval None - */ -__STATIC_INLINE void LL_FLASH_EnableInstCache(void) -{ - SET_BIT(FLASH->ACR, FLASH_ACR_ICEN); -} - -/** - * @brief Disable Instruction cache - * @rmtoll FLASH_ACR ICEN LL_FLASH_DisableInstCache - * @retval None - */ -__STATIC_INLINE void LL_FLASH_DisableInstCache(void) -{ - CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICEN); -} - -/** - * @brief Enable Data cache - * @rmtoll FLASH_ACR DCEN LL_FLASH_EnableDataCache - * @retval None - */ -__STATIC_INLINE void LL_FLASH_EnableDataCache(void) -{ - SET_BIT(FLASH->ACR, FLASH_ACR_DCEN); -} - -/** - * @brief Disable Data cache - * @rmtoll FLASH_ACR DCEN LL_FLASH_DisableDataCache - * @retval None - */ -__STATIC_INLINE void LL_FLASH_DisableDataCache(void) -{ - CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCEN); -} - -/** - * @brief Enable Instruction cache reset - * @note bit can be written only when the instruction cache is disabled - * @rmtoll FLASH_ACR ICRST LL_FLASH_EnableInstCacheReset - * @retval None - */ -__STATIC_INLINE void LL_FLASH_EnableInstCacheReset(void) -{ - SET_BIT(FLASH->ACR, FLASH_ACR_ICRST); -} - -/** - * @brief Disable Instruction cache reset - * @rmtoll FLASH_ACR ICRST LL_FLASH_DisableInstCacheReset - * @retval None - */ -__STATIC_INLINE void LL_FLASH_DisableInstCacheReset(void) -{ - CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICRST); -} - -/** - * @brief Enable Data cache reset - * @note bit can be written only when the data cache is disabled - * @rmtoll FLASH_ACR DCRST LL_FLASH_EnableDataCacheReset - * @retval None - */ -__STATIC_INLINE void LL_FLASH_EnableDataCacheReset(void) -{ - SET_BIT(FLASH->ACR, FLASH_ACR_DCRST); -} - -/** - * @brief Disable Data cache reset - * @rmtoll FLASH_ACR DCRST LL_FLASH_DisableDataCacheReset - * @retval None - */ -__STATIC_INLINE void LL_FLASH_DisableDataCacheReset(void) -{ - CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCRST); -} - - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_SYSTEM_H */ - - +/** + ****************************************************************************** + * @file stm32f4xx_ll_system.h + * @author MCD Application Team + * @brief Header file of SYSTEM LL module. + * + ****************************************************************************** + * @attention + * + *Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL SYSTEM driver contains a set of generic APIs that can be + used by user: + (+) Some of the FLASH features need to be handled in the SYSTEM file. + (+) Access to DBGCMU registers + (+) Access to SYSCFG registers + + @endverbatim + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_LL_SYSTEM_H +#define __STM32F4xx_LL_SYSTEM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_LL_Driver + * @{ + */ + +#if defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) + +/** @defgroup SYSTEM_LL SYSTEM + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants + * @{ + */ + +/** @defgroup SYSTEM_LL_EC_REMAP SYSCFG REMAP +* @{ +*/ +#define LL_SYSCFG_REMAP_FLASH (uint32_t)0x00000000 /*!< Main Flash memory mapped at 0x00000000 */ +#define LL_SYSCFG_REMAP_SYSTEMFLASH SYSCFG_MEMRMP_MEM_MODE_0 /*!< System Flash memory mapped at 0x00000000 */ +#if defined(FSMC_Bank1) +#define LL_SYSCFG_REMAP_FSMC SYSCFG_MEMRMP_MEM_MODE_1 /*!< FSMC(NOR/PSRAM 1 and 2) mapped at 0x00000000 */ +#endif /* FSMC_Bank1 */ +#if defined(FMC_Bank1) +#define LL_SYSCFG_REMAP_FMC SYSCFG_MEMRMP_MEM_MODE_1 /*!< FMC(NOR/PSRAM 1 and 2) mapped at 0x00000000 */ +#define LL_SYSCFG_REMAP_SDRAM SYSCFG_MEMRMP_MEM_MODE_2 /*!< FMC/SDRAM mapped at 0x00000000 */ +#endif /* FMC_Bank1 */ +#define LL_SYSCFG_REMAP_SRAM (SYSCFG_MEMRMP_MEM_MODE_1 | SYSCFG_MEMRMP_MEM_MODE_0) /*!< SRAM1 mapped at 0x00000000 */ + +/** + * @} + */ + +#if defined(SYSCFG_PMC_MII_RMII_SEL) + /** @defgroup SYSTEM_LL_EC_PMC SYSCFG PMC +* @{ +*/ +#define LL_SYSCFG_PMC_ETHMII (uint32_t)0x00000000 /*!< ETH Media MII interface */ +#define LL_SYSCFG_PMC_ETHRMII (uint32_t)SYSCFG_PMC_MII_RMII_SEL /*!< ETH Media RMII interface */ + +/** + * @} + */ +#endif /* SYSCFG_PMC_MII_RMII_SEL */ + + + +#if defined(SYSCFG_MEMRMP_UFB_MODE) +/** @defgroup SYSTEM_LL_EC_BANKMODE SYSCFG BANK MODE + * @{ + */ +#define LL_SYSCFG_BANKMODE_BANK1 (uint32_t)0x00000000 /*!< Flash Bank 1 base address mapped at 0x0800 0000 (AXI) and 0x0020 0000 (TCM) + and Flash Bank 2 base address mapped at 0x0810 0000 (AXI) and 0x0030 0000 (TCM)*/ +#define LL_SYSCFG_BANKMODE_BANK2 SYSCFG_MEMRMP_UFB_MODE /*!< Flash Bank 2 base address mapped at 0x0800 0000 (AXI) and 0x0020 0000(TCM) + and Flash Bank 1 base address mapped at 0x0810 0000 (AXI) and 0x0030 0000(TCM) */ +/** + * @} + */ +#endif /* SYSCFG_MEMRMP_UFB_MODE */ +/** @defgroup SYSTEM_LL_EC_I2C_FASTMODEPLUS SYSCFG I2C FASTMODEPLUS + * @{ + */ +#if defined(SYSCFG_CFGR_FMPI2C1_SCL) +#define LL_SYSCFG_I2C_FASTMODEPLUS_SCL SYSCFG_CFGR_FMPI2C1_SCL /*!< Enable Fast Mode Plus on FMPI2C_SCL pin */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_SDA SYSCFG_CFGR_FMPI2C1_SDA /*!< Enable Fast Mode Plus on FMPI2C_SDA pin*/ +#endif /* SYSCFG_CFGR_FMPI2C1_SCL */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_EXTI_PORT SYSCFG EXTI PORT + * @{ + */ +#define LL_SYSCFG_EXTI_PORTA (uint32_t)0 /*!< EXTI PORT A */ +#define LL_SYSCFG_EXTI_PORTB (uint32_t)1 /*!< EXTI PORT B */ +#define LL_SYSCFG_EXTI_PORTC (uint32_t)2 /*!< EXTI PORT C */ +#define LL_SYSCFG_EXTI_PORTD (uint32_t)3 /*!< EXTI PORT D */ +#define LL_SYSCFG_EXTI_PORTE (uint32_t)4 /*!< EXTI PORT E */ +#if defined(GPIOF) +#define LL_SYSCFG_EXTI_PORTF (uint32_t)5 /*!< EXTI PORT F */ +#endif /* GPIOF */ +#if defined(GPIOG) +#define LL_SYSCFG_EXTI_PORTG (uint32_t)6 /*!< EXTI PORT G */ +#endif /* GPIOG */ +#define LL_SYSCFG_EXTI_PORTH (uint32_t)7 /*!< EXTI PORT H */ +#if defined(GPIOI) +#define LL_SYSCFG_EXTI_PORTI (uint32_t)8 /*!< EXTI PORT I */ +#endif /* GPIOI */ +#if defined(GPIOJ) +#define LL_SYSCFG_EXTI_PORTJ (uint32_t)9 /*!< EXTI PORT J */ +#endif /* GPIOJ */ +#if defined(GPIOK) +#define LL_SYSCFG_EXTI_PORTK (uint32_t)10 /*!< EXTI PORT k */ +#endif /* GPIOK */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_EXTI_LINE SYSCFG EXTI LINE + * @{ + */ +#define LL_SYSCFG_EXTI_LINE0 (uint32_t)(0x000FU << 16 | 0) /*!< EXTI_POSITION_0 | EXTICR[0] */ +#define LL_SYSCFG_EXTI_LINE1 (uint32_t)(0x00F0U << 16 | 0) /*!< EXTI_POSITION_4 | EXTICR[0] */ +#define LL_SYSCFG_EXTI_LINE2 (uint32_t)(0x0F00U << 16 | 0) /*!< EXTI_POSITION_8 | EXTICR[0] */ +#define LL_SYSCFG_EXTI_LINE3 (uint32_t)(0xF000U << 16 | 0) /*!< EXTI_POSITION_12 | EXTICR[0] */ +#define LL_SYSCFG_EXTI_LINE4 (uint32_t)(0x000FU << 16 | 1) /*!< EXTI_POSITION_0 | EXTICR[1] */ +#define LL_SYSCFG_EXTI_LINE5 (uint32_t)(0x00F0U << 16 | 1) /*!< EXTI_POSITION_4 | EXTICR[1] */ +#define LL_SYSCFG_EXTI_LINE6 (uint32_t)(0x0F00U << 16 | 1) /*!< EXTI_POSITION_8 | EXTICR[1] */ +#define LL_SYSCFG_EXTI_LINE7 (uint32_t)(0xF000U << 16 | 1) /*!< EXTI_POSITION_12 | EXTICR[1] */ +#define LL_SYSCFG_EXTI_LINE8 (uint32_t)(0x000FU << 16 | 2) /*!< EXTI_POSITION_0 | EXTICR[2] */ +#define LL_SYSCFG_EXTI_LINE9 (uint32_t)(0x00F0U << 16 | 2) /*!< EXTI_POSITION_4 | EXTICR[2] */ +#define LL_SYSCFG_EXTI_LINE10 (uint32_t)(0x0F00U << 16 | 2) /*!< EXTI_POSITION_8 | EXTICR[2] */ +#define LL_SYSCFG_EXTI_LINE11 (uint32_t)(0xF000U << 16 | 2) /*!< EXTI_POSITION_12 | EXTICR[2] */ +#define LL_SYSCFG_EXTI_LINE12 (uint32_t)(0x000FU << 16 | 3) /*!< EXTI_POSITION_0 | EXTICR[3] */ +#define LL_SYSCFG_EXTI_LINE13 (uint32_t)(0x00F0U << 16 | 3) /*!< EXTI_POSITION_4 | EXTICR[3] */ +#define LL_SYSCFG_EXTI_LINE14 (uint32_t)(0x0F00U << 16 | 3) /*!< EXTI_POSITION_8 | EXTICR[3] */ +#define LL_SYSCFG_EXTI_LINE15 (uint32_t)(0xF000U << 16 | 3) /*!< EXTI_POSITION_12 | EXTICR[3] */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_TIMBREAK SYSCFG TIMER BREAK + * @{ + */ +#if defined(SYSCFG_CFGR2_LOCKUP_LOCK) +#define LL_SYSCFG_TIMBREAK_LOCKUP SYSCFG_CFGR2_LOCKUP_LOCK /*!< Enables and locks the LOCKUP output of CortexM4 + with Break Input of TIM1/8 */ +#define LL_SYSCFG_TIMBREAK_PVD SYSCFG_CFGR2_PVD_LOCK /*!< Enables and locks the PVD connection with TIM1/8 Break Input + and also the PVDE and PLS bits of the Power Control Interface */ +#endif /* SYSCFG_CFGR2_CLL */ +/** + * @} + */ + +#if defined(SYSCFG_MCHDLYCR_BSCKSEL) +/** @defgroup SYSTEM_LL_DFSDM_BitStream_ClockSource SYSCFG MCHDLY BCKKSEL + * @{ + */ +#define LL_SYSCFG_BITSTREAM_CLOCK_TIM2OC1 (uint32_t)0x00000000 +#define LL_SYSCFG_BITSTREAM_CLOCK_DFSDM2 SYSCFG_MCHDLYCR_BSCKSEL +/** + * @} + */ +/** @defgroup SYSTEM_LL_DFSDM_MCHDLYEN SYSCFG MCHDLY MCHDLYEN + * @{ + */ +#define LL_SYSCFG_DFSDM1_MCHDLYEN SYSCFG_MCHDLYCR_MCHDLY1EN +#define LL_SYSCFG_DFSDM2_MCHDLYEN SYSCFG_MCHDLYCR_MCHDLY2EN +/** + * @} + */ +/** @defgroup SYSTEM_LL_DFSDM_DataIn0_Source SYSCFG MCHDLY DFSDMD0SEL + * @{ + */ +#define LL_SYSCFG_DFSDM1_DataIn0 SYSCFG_MCHDLYCR_DFSDM1D0SEL +#define LL_SYSCFG_DFSDM2_DataIn0 SYSCFG_MCHDLYCR_DFSDM2D0SEL + +#define LL_SYSCFG_DFSDM1_DataIn0_PAD (uint32_t)((SYSCFG_MCHDLYCR_DFSDM1D0SEL << 16) | 0x00000000) +#define LL_SYSCFG_DFSDM1_DataIn0_DM (uint32_t)((SYSCFG_MCHDLYCR_DFSDM1D0SEL << 16) | SYSCFG_MCHDLYCR_DFSDM1D0SEL) +#define LL_SYSCFG_DFSDM2_DataIn0_PAD (uint32_t)((SYSCFG_MCHDLYCR_DFSDM2D0SEL << 16) | 0x00000000) +#define LL_SYSCFG_DFSDM2_DataIn0_DM (uint32_t)((SYSCFG_MCHDLYCR_DFSDM2D0SEL << 16) | SYSCFG_MCHDLYCR_DFSDM2D0SEL) +/** + * @} + */ +/** @defgroup SYSTEM_LL_DFSDM_DataIn2_Source SYSCFG MCHDLY DFSDMD2SEL + * @{ + */ +#define LL_SYSCFG_DFSDM1_DataIn2 SYSCFG_MCHDLYCR_DFSDM1D2SEL +#define LL_SYSCFG_DFSDM2_DataIn2 SYSCFG_MCHDLYCR_DFSDM2D2SEL + +#define LL_SYSCFG_DFSDM1_DataIn2_PAD (uint32_t)((SYSCFG_MCHDLYCR_DFSDM1D2SEL << 16) | 0x00000000) +#define LL_SYSCFG_DFSDM1_DataIn2_DM (uint32_t)((SYSCFG_MCHDLYCR_DFSDM1D2SEL << 16) | SYSCFG_MCHDLYCR_DFSDM1D2SEL) +#define LL_SYSCFG_DFSDM2_DataIn2_PAD (uint32_t)((SYSCFG_MCHDLYCR_DFSDM2D2SEL << 16) | 0x00000000) +#define LL_SYSCFG_DFSDM2_DataIn2_DM (uint32_t)((SYSCFG_MCHDLYCR_DFSDM2D2SEL << 16) | SYSCFG_MCHDLYCR_DFSDM2D2SEL) +/** + * @} + */ +/** @defgroup SYSTEM_LL_DFSDM1_TIM4OC2_BitstreamDistribution SYSCFG MCHDLY DFSDM1CK02SEL + * @{ + */ +#define LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN0 (uint32_t)0x00000000 +#define LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN2 SYSCFG_MCHDLYCR_DFSDM1CK02SEL +/** + * @} + */ +/** @defgroup SYSTEM_LL_DFSDM1_TIM4OC1_BitstreamDistribution SYSCFG MCHDLY DFSDM1CK13SEL + * @{ + */ +#define LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN1 (uint32_t)0x00000000 +#define LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN3 SYSCFG_MCHDLYCR_DFSDM1CK13SEL +/** + * @} + */ +/** @defgroup SYSTEM_LL_DFSDM1_CLKIN_SourceSelection SYSCFG MCHDLY DFSDMCFG + * @{ + */ +#define LL_SYSCFG_DFSDM1_CKIN_PAD (uint32_t)0x00000000 +#define LL_SYSCFG_DFSDM1_CKIN_DM SYSCFG_MCHDLYCR_DFSDM1CFG +/** + * @} + */ +/** @defgroup SYSTEM_LL_DFSDM1_CLKOUT_SourceSelection SYSCFG MCHDLY DFSDM1CKOSEL + * @{ + */ +#define LL_SYSCFG_DFSDM1_CKOUT (uint32_t)0x00000000 +#define LL_SYSCFG_DFSDM1_CKOUT_M27 SYSCFG_MCHDLYCR_DFSDM1CKOSEL +/** + * @} + */ + +/** @defgroup SYSTEM_LL_DFSDM2_DataIn4_SourceSelection SYSCFG MCHDLY DFSDM2D4SEL + * @{ + */ +#define LL_SYSCFG_DFSDM2_DataIn4_PAD (uint32_t)0x00000000 +#define LL_SYSCFG_DFSDM2_DataIn4_DM SYSCFG_MCHDLYCR_DFSDM2D4SEL +/** + * @} + */ +/** @defgroup SYSTEM_LL_DFSDM2_DataIn6_SourceSelection SYSCFG MCHDLY DFSDM2D6SEL + * @{ + */ +#define LL_SYSCFG_DFSDM2_DataIn6_PAD (uint32_t)0x00000000 +#define LL_SYSCFG_DFSDM2_DataIn6_DM SYSCFG_MCHDLYCR_DFSDM2D6SEL +/** + * @} + */ +/** @defgroup SYSTEM_LL_DFSDM2_TIM3OC4_BitstreamDistribution SYSCFG MCHDLY DFSDM2CK04SEL + * @{ + */ +#define LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN0 (uint32_t)0x00000000 +#define LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN4 SYSCFG_MCHDLYCR_DFSDM2CK04SEL +/** + * @} + */ +/** @defgroup SYSTEM_LL_DFSDM2_TIM3OC3_BitstreamDistribution SYSCFG MCHDLY DFSDM2CK15SEL + * @{ + */ +#define LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN1 (uint32_t)0x00000000 +#define LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN5 SYSCFG_MCHDLYCR_DFSDM2CK15SEL +/** + * @} + */ +/** @defgroup SYSTEM_LL_DFSDM2_TIM3OC2_BitstreamDistribution SYSCFG MCHDLY DFSDM2CK26SEL + * @{ + */ +#define LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN2 (uint32_t)0x00000000 +#define LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN6 SYSCFG_MCHDLYCR_DFSDM2CK26SEL +/** + * @} + */ +/** @defgroup SYSTEM_LL_DFSDM2_TIM3OC1_BitstreamDistribution SYSCFG MCHDLY DFSDM2CK37SEL + * @{ + */ +#define LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN3 (uint32_t)0x00000000 +#define LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN7 SYSCFG_MCHDLYCR_DFSDM2CK37SEL +/** + * @} + */ +/** @defgroup SYSTEM_LL_DFSDM2_CLKIN_SourceSelection SYSCFG MCHDLY DFSDM2CFG + * @{ + */ +#define LL_SYSCFG_DFSDM2_CKIN_PAD (uint32_t)0x00000000 +#define LL_SYSCFG_DFSDM2_CKIN_DM SYSCFG_MCHDLYCR_DFSDM2CFG +/** + * @} + */ +/** @defgroup SYSTEM_LL_DFSDM2_CLKOUT_SourceSelection SYSCFG MCHDLY DFSDM2CKOSEL + * @{ + */ +#define LL_SYSCFG_DFSDM2_CKOUT (uint32_t)0x00000000 +#define LL_SYSCFG_DFSDM2_CKOUT_M27 SYSCFG_MCHDLYCR_DFSDM2CKOSEL +/** + * @} + */ +#endif /* SYSCFG_MCHDLYCR_BSCKSEL */ + +/** @defgroup SYSTEM_LL_EC_TRACE DBGMCU TRACE Pin Assignment + * @{ + */ +#define LL_DBGMCU_TRACE_NONE 0x00000000U /*!< TRACE pins not assigned (default state) */ +#define LL_DBGMCU_TRACE_ASYNCH DBGMCU_CR_TRACE_IOEN /*!< TRACE pin assignment for Asynchronous Mode */ +#define LL_DBGMCU_TRACE_SYNCH_SIZE1 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_0) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 1 */ +#define LL_DBGMCU_TRACE_SYNCH_SIZE2 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_1) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 2 */ +#define LL_DBGMCU_TRACE_SYNCH_SIZE4 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 4 */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_APB1_GRP1_STOP_IP DBGMCU APB1 GRP1 STOP IP + * @{ + */ +#if defined(DBGMCU_APB1_FZ_DBG_TIM2_STOP) +#define LL_DBGMCU_APB1_GRP1_TIM2_STOP DBGMCU_APB1_FZ_DBG_TIM2_STOP /*!< TIM2 counter stopped when core is halted */ +#endif /* DBGMCU_APB1_FZ_DBG_TIM2_STOP */ +#if defined(DBGMCU_APB1_FZ_DBG_TIM3_STOP) +#define LL_DBGMCU_APB1_GRP1_TIM3_STOP DBGMCU_APB1_FZ_DBG_TIM3_STOP /*!< TIM3 counter stopped when core is halted */ +#endif /* DBGMCU_APB1_FZ_DBG_TIM3_STOP */ +#if defined(DBGMCU_APB1_FZ_DBG_TIM4_STOP) +#define LL_DBGMCU_APB1_GRP1_TIM4_STOP DBGMCU_APB1_FZ_DBG_TIM4_STOP /*!< TIM4 counter stopped when core is halted */ +#endif /* DBGMCU_APB1_FZ_DBG_TIM4_STOP */ +#define LL_DBGMCU_APB1_GRP1_TIM5_STOP DBGMCU_APB1_FZ_DBG_TIM5_STOP /*!< TIM5 counter stopped when core is halted */ +#if defined(DBGMCU_APB1_FZ_DBG_TIM6_STOP) +#define LL_DBGMCU_APB1_GRP1_TIM6_STOP DBGMCU_APB1_FZ_DBG_TIM6_STOP /*!< TIM6 counter stopped when core is halted */ +#endif /* DBGMCU_APB1_FZ_DBG_TIM6_STOP */ +#if defined(DBGMCU_APB1_FZ_DBG_TIM7_STOP) +#define LL_DBGMCU_APB1_GRP1_TIM7_STOP DBGMCU_APB1_FZ_DBG_TIM7_STOP /*!< TIM7 counter stopped when core is halted */ +#endif /* DBGMCU_APB1_FZ_DBG_TIM7_STOP */ +#if defined(DBGMCU_APB1_FZ_DBG_TIM12_STOP) +#define LL_DBGMCU_APB1_GRP1_TIM12_STOP DBGMCU_APB1_FZ_DBG_TIM12_STOP /*!< TIM12 counter stopped when core is halted */ +#endif /* DBGMCU_APB1_FZ_DBG_TIM12_STOP */ +#if defined(DBGMCU_APB1_FZ_DBG_TIM13_STOP) +#define LL_DBGMCU_APB1_GRP1_TIM13_STOP DBGMCU_APB1_FZ_DBG_TIM13_STOP /*!< TIM13 counter stopped when core is halted */ +#endif /* DBGMCU_APB1_FZ_DBG_TIM13_STOP */ +#if defined(DBGMCU_APB1_FZ_DBG_TIM14_STOP) +#define LL_DBGMCU_APB1_GRP1_TIM14_STOP DBGMCU_APB1_FZ_DBG_TIM14_STOP /*!< TIM14 counter stopped when core is halted */ +#endif /* DBGMCU_APB1_FZ_DBG_TIM14_STOP */ +#if defined(DBGMCU_APB1_FZ_DBG_LPTIM_STOP) +#define LL_DBGMCU_APB1_GRP1_LPTIM_STOP DBGMCU_APB1_FZ_DBG_LPTIM_STOP /*!< LPTIM counter stopped when core is halted */ +#endif /* DBGMCU_APB1_FZ_DBG_LPTIM_STOP */ +#define LL_DBGMCU_APB1_GRP1_RTC_STOP DBGMCU_APB1_FZ_DBG_RTC_STOP /*!< RTC counter stopped when core is halted */ +#define LL_DBGMCU_APB1_GRP1_WWDG_STOP DBGMCU_APB1_FZ_DBG_WWDG_STOP /*!< Debug Window Watchdog stopped when Core is halted */ +#define LL_DBGMCU_APB1_GRP1_IWDG_STOP DBGMCU_APB1_FZ_DBG_IWDG_STOP /*!< Debug Independent Watchdog stopped when Core is halted */ +#define LL_DBGMCU_APB1_GRP1_I2C1_STOP DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT /*!< I2C1 SMBUS timeout mode stopped when Core is halted */ +#define LL_DBGMCU_APB1_GRP1_I2C2_STOP DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT /*!< I2C2 SMBUS timeout mode stopped when Core is halted */ +#if defined(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT) +#define LL_DBGMCU_APB1_GRP1_I2C3_STOP DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT /*!< I2C3 SMBUS timeout mode stopped when Core is halted */ +#endif /* DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT */ +#if defined(DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT) +#define LL_DBGMCU_APB1_GRP1_I2C4_STOP DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT /*!< I2C4 SMBUS timeout mode stopped when Core is halted */ +#endif /* DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT */ +#if defined(DBGMCU_APB1_FZ_DBG_CAN1_STOP) +#define LL_DBGMCU_APB1_GRP1_CAN1_STOP DBGMCU_APB1_FZ_DBG_CAN1_STOP /*!< CAN1 debug stopped when Core is halted */ +#endif /* DBGMCU_APB1_FZ_DBG_CAN1_STOP */ +#if defined(DBGMCU_APB1_FZ_DBG_CAN2_STOP) +#define LL_DBGMCU_APB1_GRP1_CAN2_STOP DBGMCU_APB1_FZ_DBG_CAN2_STOP /*!< CAN2 debug stopped when Core is halted */ +#endif /* DBGMCU_APB1_FZ_DBG_CAN2_STOP */ +#if defined(DBGMCU_APB1_FZ_DBG_CAN3_STOP) +#define LL_DBGMCU_APB1_GRP1_CAN3_STOP DBGMCU_APB1_FZ_DBG_CAN3_STOP /*!< CAN3 debug stopped when Core is halted */ +#endif /* DBGMCU_APB1_FZ_DBG_CAN3_STOP */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_APB2_GRP1_STOP_IP DBGMCU APB2 GRP1 STOP IP + * @{ + */ +#define LL_DBGMCU_APB2_GRP1_TIM1_STOP DBGMCU_APB2_FZ_DBG_TIM1_STOP /*!< TIM1 counter stopped when core is halted */ +#if defined(DBGMCU_APB2_FZ_DBG_TIM8_STOP) +#define LL_DBGMCU_APB2_GRP1_TIM8_STOP DBGMCU_APB2_FZ_DBG_TIM8_STOP /*!< TIM8 counter stopped when core is halted */ +#endif /* DBGMCU_APB2_FZ_DBG_TIM8_STOP */ +#define LL_DBGMCU_APB2_GRP1_TIM9_STOP DBGMCU_APB2_FZ_DBG_TIM9_STOP /*!< TIM9 counter stopped when core is halted */ +#if defined(DBGMCU_APB2_FZ_DBG_TIM10_STOP) +#define LL_DBGMCU_APB2_GRP1_TIM10_STOP DBGMCU_APB2_FZ_DBG_TIM10_STOP /*!< TIM10 counter stopped when core is halted */ +#endif /* DBGMCU_APB2_FZ_DBG_TIM10_STOP */ +#define LL_DBGMCU_APB2_GRP1_TIM11_STOP DBGMCU_APB2_FZ_DBG_TIM11_STOP /*!< TIM11 counter stopped when core is halted */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_LATENCY FLASH LATENCY + * @{ + */ +#define LL_FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero wait state */ +#define LL_FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One wait state */ +#define LL_FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two wait states */ +#define LL_FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three wait states */ +#define LL_FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four wait states */ +#define LL_FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH five wait state */ +#define LL_FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH six wait state */ +#define LL_FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH seven wait states */ +#define LL_FLASH_LATENCY_8 FLASH_ACR_LATENCY_8WS /*!< FLASH eight wait states */ +#define LL_FLASH_LATENCY_9 FLASH_ACR_LATENCY_9WS /*!< FLASH nine wait states */ +#define LL_FLASH_LATENCY_10 FLASH_ACR_LATENCY_10WS /*!< FLASH ten wait states */ +#define LL_FLASH_LATENCY_11 FLASH_ACR_LATENCY_11WS /*!< FLASH eleven wait states */ +#define LL_FLASH_LATENCY_12 FLASH_ACR_LATENCY_12WS /*!< FLASH twelve wait states */ +#define LL_FLASH_LATENCY_13 FLASH_ACR_LATENCY_13WS /*!< FLASH thirteen wait states */ +#define LL_FLASH_LATENCY_14 FLASH_ACR_LATENCY_14WS /*!< FLASH fourteen wait states */ +#define LL_FLASH_LATENCY_15 FLASH_ACR_LATENCY_15WS /*!< FLASH fifteen wait states */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Exported_Functions SYSTEM Exported Functions + * @{ + */ + +/** @defgroup SYSTEM_LL_EF_SYSCFG SYSCFG + * @{ + */ +/** + * @brief Set memory mapping at address 0x00000000 + * @rmtoll SYSCFG_MEMRMP MEM_MODE LL_SYSCFG_SetRemapMemory + * @param Memory This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_REMAP_FLASH + * @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH + * @arg @ref LL_SYSCFG_REMAP_SRAM + * @arg @ref LL_SYSCFG_REMAP_FSMC (*) + * @arg @ref LL_SYSCFG_REMAP_FMC (*) + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetRemapMemory(uint32_t Memory) +{ + MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, Memory); +} + +/** + * @brief Get memory mapping at address 0x00000000 + * @rmtoll SYSCFG_MEMRMP MEM_MODE LL_SYSCFG_GetRemapMemory + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_REMAP_FLASH + * @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH + * @arg @ref LL_SYSCFG_REMAP_SRAM + * @arg @ref LL_SYSCFG_REMAP_FSMC (*) + * @arg @ref LL_SYSCFG_REMAP_FMC (*) + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetRemapMemory(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE)); +} + +#if defined(SYSCFG_MEMRMP_SWP_FMC) +/** + * @brief Enables the FMC Memory Mapping Swapping + * @rmtoll SYSCFG_MEMRMP SWP_FMC LL_SYSCFG_EnableFMCMemorySwapping + * @note SDRAM is accessible at 0x60000000 and NOR/RAM + * is accessible at 0xC0000000 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableFMCMemorySwapping(void) +{ + SET_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FMC_0); +} + +/** + * @brief Disables the FMC Memory Mapping Swapping + * @rmtoll SYSCFG_MEMRMP SWP_FMC LL_SYSCFG_DisableFMCMemorySwapping + * @note SDRAM is accessible at 0xC0000000 (default mapping) + * and NOR/RAM is accessible at 0x60000000 (default mapping) + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableFMCMemorySwapping(void) +{ + CLEAR_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FMC); +} + +#endif /* SYSCFG_MEMRMP_SWP_FMC */ +/** + * @brief Enables the Compensation cell Power Down + * @rmtoll SYSCFG_CMPCR CMP_PD LL_SYSCFG_EnableCompensationCell + * @note The I/O compensation cell can be used only when the device supply + * voltage ranges from 2.4 to 3.6 V + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableCompensationCell(void) +{ + SET_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_CMP_PD); +} + +/** + * @brief Disables the Compensation cell Power Down + * @rmtoll SYSCFG_CMPCR CMP_PD LL_SYSCFG_DisableCompensationCell + * @note The I/O compensation cell can be used only when the device supply + * voltage ranges from 2.4 to 3.6 V + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableCompensationCell(void) +{ + CLEAR_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_CMP_PD); +} + +/** + * @brief Get Compensation Cell ready Flag + * @rmtoll SYSCFG_CMPCR READY LL_SYSCFG_IsActiveFlag_CMPCR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_CMPCR(void) +{ + return (READ_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_READY) == (SYSCFG_CMPCR_READY)); +} + +#if defined(SYSCFG_PMC_MII_RMII_SEL) +/** + * @brief Select Ethernet PHY interface + * @rmtoll SYSCFG_PMC MII_RMII_SEL LL_SYSCFG_SetPHYInterface + * @param Interface This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_PMC_ETHMII + * @arg @ref LL_SYSCFG_PMC_ETHRMII + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetPHYInterface(uint32_t Interface) +{ + MODIFY_REG(SYSCFG->PMC, SYSCFG_PMC_MII_RMII_SEL, Interface); +} + +/** + * @brief Get Ethernet PHY interface + * @rmtoll SYSCFG_PMC MII_RMII_SEL LL_SYSCFG_GetPHYInterface + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_PMC_ETHMII + * @arg @ref LL_SYSCFG_PMC_ETHRMII + * @retval None + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetPHYInterface(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->PMC, SYSCFG_PMC_MII_RMII_SEL)); +} +#endif /* SYSCFG_PMC_MII_RMII_SEL */ + + + +#if defined(SYSCFG_MEMRMP_UFB_MODE) +/** + * @brief Select Flash bank mode (Bank flashed at 0x08000000) + * @rmtoll SYSCFG_MEMRMP UFB_MODE LL_SYSCFG_SetFlashBankMode + * @param Bank This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_BANKMODE_BANK1 + * @arg @ref LL_SYSCFG_BANKMODE_BANK2 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetFlashBankMode(uint32_t Bank) +{ + MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_UFB_MODE, Bank); +} + +/** + * @brief Get Flash bank mode (Bank flashed at 0x08000000) + * @rmtoll SYSCFG_MEMRMP UFB_MODE LL_SYSCFG_GetFlashBankMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_BANKMODE_BANK1 + * @arg @ref LL_SYSCFG_BANKMODE_BANK2 + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetFlashBankMode(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_UFB_MODE)); +} +#endif /* SYSCFG_MEMRMP_UFB_MODE */ + +#if defined(SYSCFG_CFGR_FMPI2C1_SCL) +/** + * @brief Enable the I2C fast mode plus driving capability. + * @rmtoll SYSCFG_CFGR FMPI2C1_SCL LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR FMPI2C1_SDA LL_SYSCFG_EnableFastModePlus + * @param ConfigFastModePlus This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_SCL + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_SDA + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableFastModePlus(uint32_t ConfigFastModePlus) +{ + SET_BIT(SYSCFG->CFGR, ConfigFastModePlus); +} + +/** + * @brief Disable the I2C fast mode plus driving capability. + * @rmtoll SYSCFG_CFGR FMPI2C1_SCL LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR FMPI2C1_SDA LL_SYSCFG_DisableFastModePlus\n + * @param ConfigFastModePlus This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_SCL + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_SDA + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableFastModePlus(uint32_t ConfigFastModePlus) +{ + CLEAR_BIT(SYSCFG->CFGR, ConfigFastModePlus); +} +#endif /* SYSCFG_CFGR_FMPI2C1_SCL */ + +/** + * @brief Configure source input for the EXTI external interrupt. + * @rmtoll SYSCFG_EXTICR1 EXTIx LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTIx LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTIx LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTIx LL_SYSCFG_SetEXTISource + * @param Port This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_EXTI_PORTA + * @arg @ref LL_SYSCFG_EXTI_PORTB + * @arg @ref LL_SYSCFG_EXTI_PORTC + * @arg @ref LL_SYSCFG_EXTI_PORTD + * @arg @ref LL_SYSCFG_EXTI_PORTE + * @arg @ref LL_SYSCFG_EXTI_PORTF (*) + * @arg @ref LL_SYSCFG_EXTI_PORTG (*) + * @arg @ref LL_SYSCFG_EXTI_PORTH + * + * (*) value not defined in all devices + * @param Line This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_EXTI_LINE0 + * @arg @ref LL_SYSCFG_EXTI_LINE1 + * @arg @ref LL_SYSCFG_EXTI_LINE2 + * @arg @ref LL_SYSCFG_EXTI_LINE3 + * @arg @ref LL_SYSCFG_EXTI_LINE4 + * @arg @ref LL_SYSCFG_EXTI_LINE5 + * @arg @ref LL_SYSCFG_EXTI_LINE6 + * @arg @ref LL_SYSCFG_EXTI_LINE7 + * @arg @ref LL_SYSCFG_EXTI_LINE8 + * @arg @ref LL_SYSCFG_EXTI_LINE9 + * @arg @ref LL_SYSCFG_EXTI_LINE10 + * @arg @ref LL_SYSCFG_EXTI_LINE11 + * @arg @ref LL_SYSCFG_EXTI_LINE12 + * @arg @ref LL_SYSCFG_EXTI_LINE13 + * @arg @ref LL_SYSCFG_EXTI_LINE14 + * @arg @ref LL_SYSCFG_EXTI_LINE15 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetEXTISource(uint32_t Port, uint32_t Line) +{ + MODIFY_REG(SYSCFG->EXTICR[Line & 0xFF], (Line >> 16), Port << POSITION_VAL((Line >> 16))); +} + +/** + * @brief Get the configured defined for specific EXTI Line + * @rmtoll SYSCFG_EXTICR1 EXTIx LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR2 EXTIx LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR3 EXTIx LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR4 EXTIx LL_SYSCFG_GetEXTISource + * @param Line This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_EXTI_LINE0 + * @arg @ref LL_SYSCFG_EXTI_LINE1 + * @arg @ref LL_SYSCFG_EXTI_LINE2 + * @arg @ref LL_SYSCFG_EXTI_LINE3 + * @arg @ref LL_SYSCFG_EXTI_LINE4 + * @arg @ref LL_SYSCFG_EXTI_LINE5 + * @arg @ref LL_SYSCFG_EXTI_LINE6 + * @arg @ref LL_SYSCFG_EXTI_LINE7 + * @arg @ref LL_SYSCFG_EXTI_LINE8 + * @arg @ref LL_SYSCFG_EXTI_LINE9 + * @arg @ref LL_SYSCFG_EXTI_LINE10 + * @arg @ref LL_SYSCFG_EXTI_LINE11 + * @arg @ref LL_SYSCFG_EXTI_LINE12 + * @arg @ref LL_SYSCFG_EXTI_LINE13 + * @arg @ref LL_SYSCFG_EXTI_LINE14 + * @arg @ref LL_SYSCFG_EXTI_LINE15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_EXTI_PORTA + * @arg @ref LL_SYSCFG_EXTI_PORTB + * @arg @ref LL_SYSCFG_EXTI_PORTC + * @arg @ref LL_SYSCFG_EXTI_PORTD + * @arg @ref LL_SYSCFG_EXTI_PORTE + * @arg @ref LL_SYSCFG_EXTI_PORTF (*) + * @arg @ref LL_SYSCFG_EXTI_PORTG (*) + * @arg @ref LL_SYSCFG_EXTI_PORTH + * (*) value not defined in all devices + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetEXTISource(uint32_t Line) +{ + return (uint32_t)(READ_BIT(SYSCFG->EXTICR[Line & 0xFF], (Line >> 16)) >> POSITION_VAL(Line >> 16)); +} + +#if defined(SYSCFG_CFGR2_LOCKUP_LOCK) +/** + * @brief Set connections to TIM1/8 break inputs + * @rmtoll SYSCFG_CFGR2 LockUp Lock LL_SYSCFG_SetTIMBreakInputs \n + * SYSCFG_CFGR2 PVD Lock LL_SYSCFG_SetTIMBreakInputs + * @param Break This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP + * @arg @ref LL_SYSCFG_TIMBREAK_PVD + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetTIMBreakInputs(uint32_t Break) +{ + MODIFY_REG(SYSCFG->CFGR2, SYSCFG_CFGR2_LOCKUP_LOCK | SYSCFG_CFGR2_PVD_LOCK, Break); +} + +/** + * @brief Get connections to TIM1/8 Break inputs + * @rmtoll SYSCFG_CFGR2 LockUp Lock LL_SYSCFG_SetTIMBreakInputs \n + * SYSCFG_CFGR2 PVD Lock LL_SYSCFG_SetTIMBreakInputs + * @retval Returned value can be can be a combination of the following values: + * @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP + * @arg @ref LL_SYSCFG_TIMBREAK_PVD + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetTIMBreakInputs(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_LOCKUP_LOCK | SYSCFG_CFGR2_PVD_LOCK)); +} +#endif /* SYSCFG_CFGR2_LOCKUP_LOCK */ +#if defined(SYSCFG_MCHDLYCR_BSCKSEL) +/** + * @brief Select the DFSDM2 or TIM2_OC1 as clock source for the bitstream clock. + * @rmtoll SYSCFG_MCHDLYCR BSCKSEL LL_SYSCFG_DFSDM_SetBitstreamClockSourceSelection + * @param ClockSource This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_BITSTREAM_CLOCK_DFSDM2 + * @arg @ref LL_SYSCFG_BITSTREAM_CLOCK_TIM2OC1 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DFSDM_SetBitstreamClockSourceSelection(uint32_t ClockSource) +{ + MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_BSCKSEL, ClockSource); +} +/** + * @brief Get the DFSDM2 or TIM2_OC1 as clock source for the bitstream clock. + * @rmtoll SYSCFG_MCHDLYCR BSCKSEL LL_SYSCFG_DFSDM_GetBitstreamClockSourceSelection + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_BITSTREAM_CLOCK_DFSDM2 + * @arg @ref LL_SYSCFG_BITSTREAM_CLOCK_TIM2OC1 + * @retval None + */ +__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM_GetBitstreamClockSourceSelection(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_BSCKSEL)); +} +/** + * @brief Enables the DFSDM1 or DFSDM2 Delay clock + * @rmtoll SYSCFG_MCHDLYCR MCHDLYEN LL_SYSCFG_DFSDM_EnableDelayClock + * @param MCHDLY This parameter can be one of the following values + * @arg @ref LL_SYSCFG_DFSDM1_MCHDLYEN + * @arg @ref LL_SYSCFG_DFSDM2_MCHDLYEN + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DFSDM_EnableDelayClock(uint32_t MCHDLY) +{ + SET_BIT(SYSCFG->MCHDLYCR, MCHDLY); +} + +/** + * @brief Disables the DFSDM1 or the DFSDM2 Delay clock + * @rmtoll SYSCFG_MCHDLYCR MCHDLY1EN LL_SYSCFG_DFSDM1_DisableDelayClock + * @param MCHDLY This parameter can be one of the following values + * @arg @ref LL_SYSCFG_DFSDM1_MCHDLYEN + * @arg @ref LL_SYSCFG_DFSDM2_MCHDLYEN + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DFSDM_DisableDelayClock(uint32_t MCHDLY) +{ + CLEAR_BIT(SYSCFG->MCHDLYCR, MCHDLY); +} + +/** + * @brief Select the source for DFSDM1 or DFSDM2 DatIn0 + * @rmtoll SYSCFG_MCHDLYCR DFSDMD0SEL LL_SYSCFG_DFSDM_SetDataIn0Source + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM1_DataIn0_PAD + * @arg @ref LL_SYSCFG_DFSDM1_DataIn0_DM + * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_PAD + * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_DM + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DFSDM_SetDataIn0Source(uint32_t Source) +{ + MODIFY_REG(SYSCFG->MCHDLYCR, (Source >> 16), (Source & 0x0000FFFF)); +} +/** + * @brief Get the source for DFSDM1 or DFSDM2 DatIn0. + * @rmtoll SYSCFG_MCHDLYCR DFSDMD0SEL LL_SYSCFG_DFSDM_GetDataIn0Source + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM1_DataIn0 + * @arg @ref LL_SYSCFG_DFSDM2_DataIn0 + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM1_DataIn0_PAD + * @arg @ref LL_SYSCFG_DFSDM1_DataIn0_DM + * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_PAD + * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_DM + * @retval None + */ +__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM_GetDataIn0Source(uint32_t Source) +{ + return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, Source)); +} +/** + * @brief Select the source for DFSDM1 or DFSDM2 DatIn2 + * @rmtoll SYSCFG_MCHDLYCR DFSDMD2SEL LL_SYSCFG_DFSDM_SetDataIn2Source + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM1_DataIn2_PAD + * @arg @ref LL_SYSCFG_DFSDM1_DataIn2_DM + * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_PAD + * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_DM + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DFSDM_SetDataIn2Source(uint32_t Source) +{ + MODIFY_REG(SYSCFG->MCHDLYCR, (Source >> 16), (Source & 0x0000FFFF)); +} +/** + * @brief Get the source for DFSDM1 or DFSDM2 DatIn2. + * @rmtoll SYSCFG_MCHDLYCR DFSDMD2SEL LL_SYSCFG_DFSDM_GetDataIn2Source + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM1_DataIn2 + * @arg @ref LL_SYSCFG_DFSDM2_DataIn2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM1_DataIn2_PAD + * @arg @ref LL_SYSCFG_DFSDM1_DataIn2_DM + * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_PAD + * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_DM + * @retval None + */ +__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM_GetDataIn2Source(uint32_t Source) +{ + return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, Source)); +} + +/** + * @brief Select the distribution of the bitsream lock gated by TIM4 OC2 + * @rmtoll SYSCFG_MCHDLYCR DFSDM1CK02SEL LL_SYSCFG_DFSDM1_SetTIM4OC2BitStreamDistribution + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN0 + * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN2 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DFSDM1_SetTIM4OC2BitStreamDistribution(uint32_t Source) +{ + MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CK02SEL, Source); +} +/** + * @brief Get the distribution of the bitsream lock gated by TIM4 OC2 + * @rmtoll SYSCFG_MCHDLYCR DFSDM1D2SEL LL_SYSCFG_DFSDM1_GetTIM4OC2BitStreamDistribution + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN0 + * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC2_CLKIN2 + * @retval None + */ +__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM1_GetTIM4OC2BitStreamDistribution(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CK02SEL)); +} + +/** + * @brief Select the distribution of the bitsream lock gated by TIM4 OC1 + * @rmtoll SYSCFG_MCHDLYCR DFSDM1CK13SEL LL_SYSCFG_DFSDM1_SetTIM4OC1BitStreamDistribution + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN1 + * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN3 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DFSDM1_SetTIM4OC1BitStreamDistribution(uint32_t Source) +{ + MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CK13SEL, Source); +} +/** + * @brief Get the distribution of the bitsream lock gated by TIM4 OC1 + * @rmtoll SYSCFG_MCHDLYCR DFSDM1D2SEL LL_SYSCFG_DFSDM1_GetTIM4OC1BitStreamDistribution + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN1 + * @arg @ref LL_SYSCFG_DFSDM1_TIM4OC1_CLKIN3 + * @retval None + */ +__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM1_GetTIM4OC1BitStreamDistribution(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CK13SEL)); +} + +/** + * @brief Select the DFSDM1 Clock In + * @rmtoll SYSCFG_MCHDLYCR DFSDM1CFG LL_SYSCFG_DFSDM1_SetClockInSourceSelection + * @param ClockSource This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM1_CKIN_PAD + * @arg @ref LL_SYSCFG_DFSDM1_CKIN_DM + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DFSDM1_SetClockInSourceSelection(uint32_t ClockSource) +{ + MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CFG, ClockSource); +} +/** + * @brief GET the DFSDM1 Clock In + * @rmtoll SYSCFG_MCHDLYCR DFSDM1CFG LL_SYSCFG_DFSDM1_GetClockInSourceSelection + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM1_CKIN_PAD + * @arg @ref LL_SYSCFG_DFSDM1_CKIN_DM + * @retval None + */ +__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM1_GetClockInSourceSelection(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CFG)); +} + +/** + * @brief Select the DFSDM1 Clock Out + * @rmtoll SYSCFG_MCHDLYCR DFSDM1CKOSEL LL_SYSCFG_DFSDM1_SetClockOutSourceSelection + * @param ClockSource This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM1_CKOUT + * @arg @ref LL_SYSCFG_DFSDM1_CKOUT_M27 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DFSDM1_SetClockOutSourceSelection(uint32_t ClockSource) +{ + MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CKOSEL, ClockSource); +} +/** + * @brief GET the DFSDM1 Clock Out + * @rmtoll SYSCFG_MCHDLYCR DFSDM1CKOSEL LL_SYSCFG_DFSDM1_GetClockOutSourceSelection + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM1_CKOUT + * @arg @ref LL_SYSCFG_DFSDM1_CKOUT_M27 + * @retval None + */ +__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM1_GetClockOutSourceSelection(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM1CKOSEL)); +} + +/** + * @brief Enables the DFSDM2 Delay clock + * @rmtoll SYSCFG_MCHDLYCR MCHDLY2EN LL_SYSCFG_DFSDM2_EnableDelayClock + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DFSDM2_EnableDelayClock(void) +{ + SET_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_MCHDLY2EN); +} + +/** + * @brief Disables the DFSDM2 Delay clock + * @rmtoll SYSCFG_MCHDLYCR MCHDLY2EN LL_SYSCFG_DFSDM2_DisableDelayClock + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DFSDM2_DisableDelayClock(void) +{ + CLEAR_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_MCHDLY2EN); +} +/** + * @brief Select the source for DFSDM2 DatIn0 + * @rmtoll SYSCFG_MCHDLYCR DFSDM2D0SEL LL_SYSCFG_DFSDM2_SetDataIn0Source + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_PAD + * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_DM + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetDataIn0Source(uint32_t Source) +{ + MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D0SEL, Source); +} +/** + * @brief Get the source for DFSDM2 DatIn0. + * @rmtoll SYSCFG_MCHDLYCR DFSDM2D0SEL LL_SYSCFG_DFSDM2_GetDataIn0Source + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_PAD + * @arg @ref LL_SYSCFG_DFSDM2_DataIn0_DM + * @retval None + */ +__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetDataIn0Source(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D0SEL)); +} + +/** + * @brief Select the source for DFSDM2 DatIn2 + * @rmtoll SYSCFG_MCHDLYCR DFSDM2D2SEL LL_SYSCFG_DFSDM2_SetDataIn2Source + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_PAD + * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_DM + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetDataIn2Source(uint32_t Source) +{ + MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D2SEL, Source); +} +/** + * @brief Get the source for DFSDM2 DatIn2. + * @rmtoll SYSCFG_MCHDLYCR DFSDM2D2SEL LL_SYSCFG_DFSDM2_GetDataIn2Source + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_PAD + * @arg @ref LL_SYSCFG_DFSDM2_DataIn2_DM + * @retval None + */ +__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetDataIn2Source(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D2SEL)); +} + +/** + * @brief Select the source for DFSDM2 DatIn4 + * @rmtoll SYSCFG_MCHDLYCR DFSDM2D4SEL LL_SYSCFG_DFSDM2_SetDataIn4Source + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM2_DataIn4_PAD + * @arg @ref LL_SYSCFG_DFSDM2_DataIn4_DM + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetDataIn4Source(uint32_t Source) +{ + MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D4SEL, Source); +} +/** + * @brief Get the source for DFSDM2 DatIn4. + * @rmtoll SYSCFG_MCHDLYCR DFSDM2D4SEL LL_SYSCFG_DFSDM2_GetDataIn4Source + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM2_DataIn4_PAD + * @arg @ref LL_SYSCFG_DFSDM2_DataIn4_DM + * @retval None + */ +__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetDataIn4Source(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D4SEL)); +} + +/** + * @brief Select the source for DFSDM2 DatIn6 + * @rmtoll SYSCFG_MCHDLYCR DFSDM2D6SEL LL_SYSCFG_DFSDM2_SetDataIn6Source + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM2_DataIn6_PAD + * @arg @ref LL_SYSCFG_DFSDM2_DataIn6_DM + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetDataIn6Source(uint32_t Source) +{ + MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D6SEL, Source); +} +/** + * @brief Get the source for DFSDM2 DatIn6. + * @rmtoll SYSCFG_MCHDLYCR DFSDM2D6SEL LL_SYSCFG_DFSDM2_GetDataIn6Source + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM2_DataIn6_PAD + * @arg @ref LL_SYSCFG_DFSDM2_DataIn6_DM + * @retval None + */ +__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetDataIn6Source(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2D6SEL)); +} + +/** + * @brief Select the distribution of the bitsream lock gated by TIM3 OC4 + * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK04SEL LL_SYSCFG_DFSDM2_SetTIM3OC4BitStreamDistribution + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN0 + * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN4 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetTIM3OC4BitStreamDistribution(uint32_t Source) +{ + MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK04SEL, Source); +} +/** + * @brief Get the distribution of the bitsream lock gated by TIM3 OC4 + * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK04SEL LL_SYSCFG_DFSDM2_GetTIM3OC4BitStreamDistribution + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN0 + * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC4_CLKIN4 + * @retval None + */ +__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetTIM3OC4BitStreamDistribution(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK04SEL)); +} + +/** + * @brief Select the distribution of the bitsream lock gated by TIM3 OC3 + * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK15SEL LL_SYSCFG_DFSDM2_SetTIM3OC3BitStreamDistribution + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN1 + * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN5 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetTIM3OC3BitStreamDistribution(uint32_t Source) +{ + MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK15SEL, Source); +} +/** + * @brief Get the distribution of the bitsream lock gated by TIM3 OC4 + * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK04SEL LL_SYSCFG_DFSDM2_GetTIM3OC3BitStreamDistribution + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN1 + * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC3_CLKIN5 + * @retval None + */ +__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetTIM3OC3BitStreamDistribution(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK15SEL)); +} + +/** + * @brief Select the distribution of the bitsream lock gated by TIM3 OC2 + * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK26SEL LL_SYSCFG_DFSDM2_SetTIM3OC2BitStreamDistribution + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN2 + * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN6 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetTIM3OC2BitStreamDistribution(uint32_t Source) +{ + MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK26SEL, Source); +} +/** + * @brief Get the distribution of the bitsream lock gated by TIM3 OC2 + * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK04SEL LL_SYSCFG_DFSDM2_GetTIM3OC2BitStreamDistribution + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN2 + * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC2_CLKIN6 + * @retval None + */ +__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetTIM3OC2BitStreamDistribution(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK26SEL)); +} + +/** + * @brief Select the distribution of the bitsream lock gated by TIM3 OC1 + * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK37SEL LL_SYSCFG_DFSDM2_SetTIM3OC1BitStreamDistribution + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN3 + * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN7 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetTIM3OC1BitStreamDistribution(uint32_t Source) +{ + MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK37SEL, Source); +} +/** + * @brief Get the distribution of the bitsream lock gated by TIM3 OC1 + * @rmtoll SYSCFG_MCHDLYCR DFSDM2CK37SEL LL_SYSCFG_DFSDM2_GetTIM3OC1BitStreamDistribution + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN3 + * @arg @ref LL_SYSCFG_DFSDM2_TIM3OC1_CLKIN7 + * @retval None + */ +__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetTIM3OC1BitStreamDistribution(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CK37SEL)); +} + +/** + * @brief Select the DFSDM2 Clock In + * @rmtoll SYSCFG_MCHDLYCR DFSDM2CFG LL_SYSCFG_DFSDM2_SetClockInSourceSelection + * @param ClockSource This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM2_CKIN_PAD + * @arg @ref LL_SYSCFG_DFSDM2_CKIN_DM + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetClockInSourceSelection(uint32_t ClockSource) +{ + MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CFG, ClockSource); +} +/** + * @brief GET the DFSDM2 Clock In + * @rmtoll SYSCFG_MCHDLYCR DFSDM2CFG LL_SYSCFG_DFSDM2_GetClockInSourceSelection + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM2_CKIN_PAD + * @arg @ref LL_SYSCFG_DFSDM2_CKIN_DM + * @retval None + */ +__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetClockInSourceSelection(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CFG)); +} + +/** + * @brief Select the DFSDM2 Clock Out + * @rmtoll SYSCFG_MCHDLYCR DFSDM2CKOSEL LL_SYSCFG_DFSDM2_SetClockOutSourceSelection + * @param ClockSource This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM2_CKOUT + * @arg @ref LL_SYSCFG_DFSDM2_CKOUT_M27 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DFSDM2_SetClockOutSourceSelection(uint32_t ClockSource) +{ + MODIFY_REG(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CKOSEL, ClockSource); +} +/** + * @brief GET the DFSDM2 Clock Out + * @rmtoll SYSCFG_MCHDLYCR DFSDM2CKOSEL LL_SYSCFG_DFSDM2_GetClockOutSourceSelection + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_DFSDM2_CKOUT + * @arg @ref LL_SYSCFG_DFSDM2_CKOUT_M27 + * @retval None + */ +__STATIC_INLINE uint32_t LL_SYSCFG_DFSDM2_GetClockOutSourceSelection(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->MCHDLYCR, SYSCFG_MCHDLYCR_DFSDM2CKOSEL)); +} + +#endif /* SYSCFG_MCHDLYCR_BSCKSEL */ +/** + * @} + */ + + +/** @defgroup SYSTEM_LL_EF_DBGMCU DBGMCU + * @{ + */ + +/** + * @brief Return the device identifier + * @note For STM32F405/407xx and STM32F415/417xx devices, the device ID is 0x413 + * @note For STM32F42xxx and STM32F43xxx devices, the device ID is 0x419 + * @note For STM32F401xx devices, the device ID is 0x423 + * @note For STM32F401xx devices, the device ID is 0x433 + * @note For STM32F411xx devices, the device ID is 0x431 + * @note For STM32F410xx devices, the device ID is 0x458 + * @note For STM32F412xx devices, the device ID is 0x441 + * @note For STM32F413xx and STM32423xx devices, the device ID is 0x463 + * @note For STM32F446xx devices, the device ID is 0x421 + * @note For STM32F469xx and STM32F479xx devices, the device ID is 0x434 + * @rmtoll DBGMCU_IDCODE DEV_ID LL_DBGMCU_GetDeviceID + * @retval Values between Min_Data=0x00 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID(void) +{ + return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_DEV_ID)); +} + +/** + * @brief Return the device revision identifier + * @note This field indicates the revision of the device. + For example, it is read as RevA -> 0x1000, Cat 2 revZ -> 0x1001, rev1 -> 0x1003, rev2 ->0x1007, revY -> 0x100F for STM32F405/407xx and STM32F415/417xx devices + For example, it is read as RevA -> 0x1000, Cat 2 revY -> 0x1003, rev1 -> 0x1007, rev3 ->0x2001 for STM32F42xxx and STM32F43xxx devices + For example, it is read as RevZ -> 0x1000, Cat 2 revA -> 0x1001 for STM32F401xB/C devices + For example, it is read as RevA -> 0x1000, Cat 2 revZ -> 0x1001 for STM32F401xD/E devices + For example, it is read as RevA -> 0x1000 for STM32F411xx,STM32F413/423xx,STM32F469/423xx, STM32F446xx and STM32F410xx devices + For example, it is read as RevZ -> 0x1001, Cat 2 revB -> 0x2000, revC -> 0x3000 for STM32F412xx devices + * @rmtoll DBGMCU_IDCODE REV_ID LL_DBGMCU_GetRevisionID + * @retval Values between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void) +{ + return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_REV_ID) >> DBGMCU_IDCODE_REV_ID_Pos); +} + +/** + * @brief Enable the Debug Module during SLEEP mode + * @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_EnableDBGSleepMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableDBGSleepMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @brief Disable the Debug Module during SLEEP mode + * @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_DisableDBGSleepMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableDBGSleepMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @brief Enable the Debug Module during STOP mode + * @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_EnableDBGStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Disable the Debug Module during STOP mode + * @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_DisableDBGStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Enable the Debug Module during STANDBY mode + * @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_EnableDBGStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableDBGStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @brief Disable the Debug Module during STANDBY mode + * @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_DisableDBGStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableDBGStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @brief Set Trace pin assignment control + * @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_SetTracePinAssignment\n + * DBGMCU_CR TRACE_MODE LL_DBGMCU_SetTracePinAssignment + * @param PinAssignment This parameter can be one of the following values: + * @arg @ref LL_DBGMCU_TRACE_NONE + * @arg @ref LL_DBGMCU_TRACE_ASYNCH + * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1 + * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2 + * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4 + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_SetTracePinAssignment(uint32_t PinAssignment) +{ + MODIFY_REG(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE, PinAssignment); +} + +/** + * @brief Get Trace pin assignment control + * @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_GetTracePinAssignment\n + * DBGMCU_CR TRACE_MODE LL_DBGMCU_GetTracePinAssignment + * @retval Returned value can be one of the following values: + * @arg @ref LL_DBGMCU_TRACE_NONE + * @arg @ref LL_DBGMCU_TRACE_ASYNCH + * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1 + * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2 + * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4 + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetTracePinAssignment(void) +{ + return (uint32_t)(READ_BIT(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE)); +} + +/** + * @brief Freeze APB1 peripherals (group1 peripherals) + * @rmtoll DBGMCU_APB1_FZ DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1_FZ DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1_FZ DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1_FZ DBG_TIM5_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1_FZ DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1_FZ DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1_FZ DBG_TIM12_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1_FZ DBG_TIM13_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1_FZ DBG_TIM14_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1_FZ DBG_LPTIM_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1_FZ DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1_FZ DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1_FZ DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1_FZ DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1_FZ DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1_FZ DBG_I2C3_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1_FZ DBG_I2C4_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1_FZ DBG_CAN1_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1_FZ DBG_CAN2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1_FZ DBG_CAN3_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C4_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_CAN1_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_CAN3_STOP (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->APB1FZ, Periphs); +} + +/** + * @brief Unfreeze APB1 peripherals (group1 peripherals) + * @rmtoll DBGMCU_APB1_FZ DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1_FZ DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1_FZ DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1_FZ DBG_TIM5_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1_FZ DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1_FZ DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1_FZ DBG_TIM12_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1_FZ DBG_TIM13_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1_FZ DBG_TIM14_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1_FZ DBG_LPTIM_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1_FZ DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1_FZ DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1_FZ DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1_FZ DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1_FZ DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1_FZ DBG_I2C3_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1_FZ DBG_I2C4_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1_FZ DBG_CAN1_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1_FZ DBG_CAN2_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBGMCU_APB1_FZ DBG_CAN3_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C4_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_CAN1_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_CAN3_STOP (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->APB1FZ, Periphs); +} + +/** + * @brief Freeze APB2 peripherals + * @rmtoll DBGMCU_APB2_FZ DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_APB2_FZ DBG_TIM8_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_APB2_FZ DBG_TIM9_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_APB2_FZ DBG_TIM10_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_APB2_FZ DBG_TIM11_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP (*) + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP (*) + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP (*) + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->APB2FZ, Periphs); +} + +/** + * @brief Unfreeze APB2 peripherals + * @rmtoll DBGMCU_APB2_FZ DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n + * DBGMCU_APB2_FZ DBG_TIM8_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n + * DBGMCU_APB2_FZ DBG_TIM9_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n + * DBGMCU_APB2_FZ DBG_TIM10_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n + * DBGMCU_APB2_FZ DBG_TIM11_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP (*) + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP (*) + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP (*) + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->APB2FZ, Periphs); +} +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EF_FLASH FLASH + * @{ + */ + +/** + * @brief Set FLASH Latency + * @rmtoll FLASH_ACR LATENCY LL_FLASH_SetLatency + * @param Latency This parameter can be one of the following values: + * @arg @ref LL_FLASH_LATENCY_0 + * @arg @ref LL_FLASH_LATENCY_1 + * @arg @ref LL_FLASH_LATENCY_2 + * @arg @ref LL_FLASH_LATENCY_3 + * @arg @ref LL_FLASH_LATENCY_4 + * @arg @ref LL_FLASH_LATENCY_5 + * @arg @ref LL_FLASH_LATENCY_6 + * @arg @ref LL_FLASH_LATENCY_7 + * @arg @ref LL_FLASH_LATENCY_8 + * @arg @ref LL_FLASH_LATENCY_9 + * @arg @ref LL_FLASH_LATENCY_10 + * @arg @ref LL_FLASH_LATENCY_11 + * @arg @ref LL_FLASH_LATENCY_12 + * @arg @ref LL_FLASH_LATENCY_13 + * @arg @ref LL_FLASH_LATENCY_14 + * @arg @ref LL_FLASH_LATENCY_15 + * @retval None + */ +__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency) +{ + MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency); +} + +/** + * @brief Get FLASH Latency + * @rmtoll FLASH_ACR LATENCY LL_FLASH_GetLatency + * @retval Returned value can be one of the following values: + * @arg @ref LL_FLASH_LATENCY_0 + * @arg @ref LL_FLASH_LATENCY_1 + * @arg @ref LL_FLASH_LATENCY_2 + * @arg @ref LL_FLASH_LATENCY_3 + * @arg @ref LL_FLASH_LATENCY_4 + * @arg @ref LL_FLASH_LATENCY_5 + * @arg @ref LL_FLASH_LATENCY_6 + * @arg @ref LL_FLASH_LATENCY_7 + * @arg @ref LL_FLASH_LATENCY_8 + * @arg @ref LL_FLASH_LATENCY_9 + * @arg @ref LL_FLASH_LATENCY_10 + * @arg @ref LL_FLASH_LATENCY_11 + * @arg @ref LL_FLASH_LATENCY_12 + * @arg @ref LL_FLASH_LATENCY_13 + * @arg @ref LL_FLASH_LATENCY_14 + * @arg @ref LL_FLASH_LATENCY_15 + */ +__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void) +{ + return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY)); +} + +/** + * @brief Enable Prefetch + * @rmtoll FLASH_ACR PRFTEN LL_FLASH_EnablePrefetch + * @retval None + */ +__STATIC_INLINE void LL_FLASH_EnablePrefetch(void) +{ + SET_BIT(FLASH->ACR, FLASH_ACR_PRFTEN); +} + +/** + * @brief Disable Prefetch + * @rmtoll FLASH_ACR PRFTEN LL_FLASH_DisablePrefetch + * @retval None + */ +__STATIC_INLINE void LL_FLASH_DisablePrefetch(void) +{ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTEN); +} + +/** + * @brief Check if Prefetch buffer is enabled + * @rmtoll FLASH_ACR PRFTEN LL_FLASH_IsPrefetchEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_FLASH_IsPrefetchEnabled(void) +{ + return (READ_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) == (FLASH_ACR_PRFTEN)); +} + +/** + * @brief Enable Instruction cache + * @rmtoll FLASH_ACR ICEN LL_FLASH_EnableInstCache + * @retval None + */ +__STATIC_INLINE void LL_FLASH_EnableInstCache(void) +{ + SET_BIT(FLASH->ACR, FLASH_ACR_ICEN); +} + +/** + * @brief Disable Instruction cache + * @rmtoll FLASH_ACR ICEN LL_FLASH_DisableInstCache + * @retval None + */ +__STATIC_INLINE void LL_FLASH_DisableInstCache(void) +{ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICEN); +} + +/** + * @brief Enable Data cache + * @rmtoll FLASH_ACR DCEN LL_FLASH_EnableDataCache + * @retval None + */ +__STATIC_INLINE void LL_FLASH_EnableDataCache(void) +{ + SET_BIT(FLASH->ACR, FLASH_ACR_DCEN); +} + +/** + * @brief Disable Data cache + * @rmtoll FLASH_ACR DCEN LL_FLASH_DisableDataCache + * @retval None + */ +__STATIC_INLINE void LL_FLASH_DisableDataCache(void) +{ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCEN); +} + +/** + * @brief Enable Instruction cache reset + * @note bit can be written only when the instruction cache is disabled + * @rmtoll FLASH_ACR ICRST LL_FLASH_EnableInstCacheReset + * @retval None + */ +__STATIC_INLINE void LL_FLASH_EnableInstCacheReset(void) +{ + SET_BIT(FLASH->ACR, FLASH_ACR_ICRST); +} + +/** + * @brief Disable Instruction cache reset + * @rmtoll FLASH_ACR ICRST LL_FLASH_DisableInstCacheReset + * @retval None + */ +__STATIC_INLINE void LL_FLASH_DisableInstCacheReset(void) +{ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICRST); +} + +/** + * @brief Enable Data cache reset + * @note bit can be written only when the data cache is disabled + * @rmtoll FLASH_ACR DCRST LL_FLASH_EnableDataCacheReset + * @retval None + */ +__STATIC_INLINE void LL_FLASH_EnableDataCacheReset(void) +{ + SET_BIT(FLASH->ACR, FLASH_ACR_DCRST); +} + +/** + * @brief Disable Data cache reset + * @rmtoll FLASH_ACR DCRST LL_FLASH_DisableDataCacheReset + * @retval None + */ +__STATIC_INLINE void LL_FLASH_DisableDataCacheReset(void) +{ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCRST); +} + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_LL_SYSTEM_H */ + + diff --git a/Drivers/stm32f4xx_ll_tim.h b/libs/hal/stm32f4xx_ll_tim.h similarity index 97% rename from Drivers/stm32f4xx_ll_tim.h rename to libs/hal/stm32f4xx_ll_tim.h index cf6ca38..61148e4 100644 --- a/Drivers/stm32f4xx_ll_tim.h +++ b/libs/hal/stm32f4xx_ll_tim.h @@ -1,4093 +1,4093 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_tim.h - * @author MCD Application Team - * @brief Header file of TIM LL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_TIM_H -#define __STM32F4xx_LL_TIM_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -#if defined (TIM1) || defined (TIM2) || defined (TIM3) || defined (TIM4) || defined (TIM5) || defined (TIM6) || defined (TIM7) || defined (TIM8) || defined (TIM9) || defined (TIM10) || defined (TIM11) || defined (TIM12) || defined (TIM13) || defined (TIM14) - -/** @defgroup TIM_LL TIM - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @defgroup TIM_LL_Private_Variables TIM Private Variables - * @{ - */ -static const uint8_t OFFSET_TAB_CCMRx[] = -{ - 0x00U, /* 0: TIMx_CH1 */ - 0x00U, /* 1: TIMx_CH1N */ - 0x00U, /* 2: TIMx_CH2 */ - 0x00U, /* 3: TIMx_CH2N */ - 0x04U, /* 4: TIMx_CH3 */ - 0x04U, /* 5: TIMx_CH3N */ - 0x04U /* 6: TIMx_CH4 */ -}; - -static const uint8_t SHIFT_TAB_OCxx[] = -{ - 0U, /* 0: OC1M, OC1FE, OC1PE */ - 0U, /* 1: - NA */ - 8U, /* 2: OC2M, OC2FE, OC2PE */ - 0U, /* 3: - NA */ - 0U, /* 4: OC3M, OC3FE, OC3PE */ - 0U, /* 5: - NA */ - 8U /* 6: OC4M, OC4FE, OC4PE */ -}; - -static const uint8_t SHIFT_TAB_ICxx[] = -{ - 0U, /* 0: CC1S, IC1PSC, IC1F */ - 0U, /* 1: - NA */ - 8U, /* 2: CC2S, IC2PSC, IC2F */ - 0U, /* 3: - NA */ - 0U, /* 4: CC3S, IC3PSC, IC3F */ - 0U, /* 5: - NA */ - 8U /* 6: CC4S, IC4PSC, IC4F */ -}; - -static const uint8_t SHIFT_TAB_CCxP[] = -{ - 0U, /* 0: CC1P */ - 2U, /* 1: CC1NP */ - 4U, /* 2: CC2P */ - 6U, /* 3: CC2NP */ - 8U, /* 4: CC3P */ - 10U, /* 5: CC3NP */ - 12U /* 6: CC4P */ -}; - -static const uint8_t SHIFT_TAB_OISx[] = -{ - 0U, /* 0: OIS1 */ - 1U, /* 1: OIS1N */ - 2U, /* 2: OIS2 */ - 3U, /* 3: OIS2N */ - 4U, /* 4: OIS3 */ - 5U, /* 5: OIS3N */ - 6U /* 6: OIS4 */ -}; -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup TIM_LL_Private_Constants TIM Private Constants - * @{ - */ - - -/* Remap mask definitions */ -#define TIMx_OR_RMP_SHIFT 16U -#define TIMx_OR_RMP_MASK 0x0000FFFFU -#define TIM2_OR_RMP_MASK (TIM_OR_ITR1_RMP << TIMx_OR_RMP_SHIFT) -#define TIM5_OR_RMP_MASK (TIM_OR_TI4_RMP << TIMx_OR_RMP_SHIFT) -#define TIM11_OR_RMP_MASK (TIM_OR_TI1_RMP << TIMx_OR_RMP_SHIFT) - -/* Mask used to set the TDG[x:0] of the DTG bits of the TIMx_BDTR register */ -#define DT_DELAY_1 ((uint8_t)0x7F) -#define DT_DELAY_2 ((uint8_t)0x3F) -#define DT_DELAY_3 ((uint8_t)0x1F) -#define DT_DELAY_4 ((uint8_t)0x1F) - -/* Mask used to set the DTG[7:5] bits of the DTG bits of the TIMx_BDTR register */ -#define DT_RANGE_1 ((uint8_t)0x00) -#define DT_RANGE_2 ((uint8_t)0x80) -#define DT_RANGE_3 ((uint8_t)0xC0) -#define DT_RANGE_4 ((uint8_t)0xE0) - - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup TIM_LL_Private_Macros TIM Private Macros - * @{ - */ -/** @brief Convert channel id into channel index. - * @param __CHANNEL__ This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH1N - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH2N - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH3N - * @arg @ref LL_TIM_CHANNEL_CH4 - * @retval none - */ -#define TIM_GET_CHANNEL_INDEX( __CHANNEL__) \ - (((__CHANNEL__) == LL_TIM_CHANNEL_CH1) ? 0U :\ - ((__CHANNEL__) == LL_TIM_CHANNEL_CH1N) ? 1U :\ - ((__CHANNEL__) == LL_TIM_CHANNEL_CH2) ? 2U :\ - ((__CHANNEL__) == LL_TIM_CHANNEL_CH2N) ? 3U :\ - ((__CHANNEL__) == LL_TIM_CHANNEL_CH3) ? 4U :\ - ((__CHANNEL__) == LL_TIM_CHANNEL_CH3N) ? 5U : 6U) - -/** @brief Calculate the deadtime sampling period(in ps). - * @param __TIMCLK__ timer input clock frequency (in Hz). - * @param __CKD__ This parameter can be one of the following values: - * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 - * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 - * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 - * @retval none - */ -#define TIM_CALC_DTS(__TIMCLK__, __CKD__) \ - (((__CKD__) == LL_TIM_CLOCKDIVISION_DIV1) ? ((uint64_t)1000000000000U/(__TIMCLK__)) : \ - ((__CKD__) == LL_TIM_CLOCKDIVISION_DIV2) ? ((uint64_t)1000000000000U/((__TIMCLK__) >> 1U)) : \ - ((uint64_t)1000000000000U/((__TIMCLK__) >> 2U))) -/** - * @} - */ - - -/* Exported types ------------------------------------------------------------*/ -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup TIM_LL_ES_INIT TIM Exported Init structure - * @{ - */ - -/** - * @brief TIM Time Base configuration structure definition. - */ -typedef struct -{ - uint16_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. - This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_SetPrescaler().*/ - - uint32_t CounterMode; /*!< Specifies the counter mode. - This parameter can be a value of @ref TIM_LL_EC_COUNTERMODE. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_SetCounterMode().*/ - - uint32_t Autoreload; /*!< Specifies the auto reload value to be loaded into the active - Auto-Reload Register at the next update event. - This parameter must be a number between Min_Data=0x0000 and Max_Data=0xFFFF. - Some timer instances may support 32 bits counters. In that case this parameter must - be a number between 0x0000 and 0xFFFFFFFF. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_SetAutoReload().*/ - - uint32_t ClockDivision; /*!< Specifies the clock division. - This parameter can be a value of @ref TIM_LL_EC_CLOCKDIVISION. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_SetClockDivision().*/ - - uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter - reaches zero, an update event is generated and counting restarts - from the RCR value (N). - This means in PWM mode that (N+1) corresponds to: - - the number of PWM periods in edge-aligned mode - - the number of half PWM period in center-aligned mode - GP timers: this parameter must be a number between Min_Data = 0x00 and - Max_Data = 0xFF. - Advanced timers: this parameter must be a number between Min_Data = 0x0000 and - Max_Data = 0xFFFF. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_SetRepetitionCounter().*/ -} LL_TIM_InitTypeDef; - -/** - * @brief TIM Output Compare configuration structure definition. - */ -typedef struct -{ - uint32_t OCMode; /*!< Specifies the output mode. - This parameter can be a value of @ref TIM_LL_EC_OCMODE. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_OC_SetMode().*/ - - uint32_t OCState; /*!< Specifies the TIM Output Compare state. - This parameter can be a value of @ref TIM_LL_EC_OCSTATE. - - This feature can be modified afterwards using unitary functions - @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/ - - uint32_t OCNState; /*!< Specifies the TIM complementary Output Compare state. - This parameter can be a value of @ref TIM_LL_EC_OCSTATE. - - This feature can be modified afterwards using unitary functions - @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/ - - uint32_t CompareValue; /*!< Specifies the Compare value to be loaded into the Capture Compare Register. - This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF. - - This feature can be modified afterwards using unitary function - LL_TIM_OC_SetCompareCHx (x=1..6).*/ - - uint32_t OCPolarity; /*!< Specifies the output polarity. - This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_OC_SetPolarity().*/ - - uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. - This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_OC_SetPolarity().*/ - - - uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_OC_SetIdleState().*/ - - uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_OC_SetIdleState().*/ -} LL_TIM_OC_InitTypeDef; - -/** - * @brief TIM Input Capture configuration structure definition. - */ - -typedef struct -{ - - uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_IC_SetPolarity().*/ - - uint32_t ICActiveInput; /*!< Specifies the input. - This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_IC_SetActiveInput().*/ - - uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_LL_EC_ICPSC. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_IC_SetPrescaler().*/ - - uint32_t ICFilter; /*!< Specifies the input capture filter. - This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_IC_SetFilter().*/ -} LL_TIM_IC_InitTypeDef; - - -/** - * @brief TIM Encoder interface configuration structure definition. - */ -typedef struct -{ - uint32_t EncoderMode; /*!< Specifies the encoder resolution (x2 or x4). - This parameter can be a value of @ref TIM_LL_EC_ENCODERMODE. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_SetEncoderMode().*/ - - uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input. - This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_IC_SetPolarity().*/ - - uint32_t IC1ActiveInput; /*!< Specifies the TI1 input source - This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_IC_SetActiveInput().*/ - - uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value. - This parameter can be a value of @ref TIM_LL_EC_ICPSC. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_IC_SetPrescaler().*/ - - uint32_t IC1Filter; /*!< Specifies the TI1 input filter. - This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_IC_SetFilter().*/ - - uint32_t IC2Polarity; /*!< Specifies the active edge of TI2 input. - This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_IC_SetPolarity().*/ - - uint32_t IC2ActiveInput; /*!< Specifies the TI2 input source - This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_IC_SetActiveInput().*/ - - uint32_t IC2Prescaler; /*!< Specifies the TI2 input prescaler value. - This parameter can be a value of @ref TIM_LL_EC_ICPSC. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_IC_SetPrescaler().*/ - - uint32_t IC2Filter; /*!< Specifies the TI2 input filter. - This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_IC_SetFilter().*/ - -} LL_TIM_ENCODER_InitTypeDef; - -/** - * @brief TIM Hall sensor interface configuration structure definition. - */ -typedef struct -{ - - uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input. - This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_IC_SetPolarity().*/ - - uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value. - Prescaler must be set to get a maximum counter period longer than the - time interval between 2 consecutive changes on the Hall inputs. - This parameter can be a value of @ref TIM_LL_EC_ICPSC. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_IC_SetPrescaler().*/ - - uint32_t IC1Filter; /*!< Specifies the TI1 input filter. - This parameter can be a value of - @ref TIM_LL_EC_IC_FILTER. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_IC_SetFilter().*/ - - uint32_t CommutationDelay; /*!< Specifies the compare value to be loaded into the Capture Compare Register. - A positive pulse (TRGO event) is generated with a programmable delay every time - a change occurs on the Hall inputs. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_OC_SetCompareCH2().*/ -} LL_TIM_HALLSENSOR_InitTypeDef; - -/** - * @brief BDTR (Break and Dead Time) structure definition - */ -typedef struct -{ - uint32_t OSSRState; /*!< Specifies the Off-State selection used in Run mode. - This parameter can be a value of @ref TIM_LL_EC_OSSR - - This feature can be modified afterwards using unitary function - @ref LL_TIM_SetOffStates() - - @note This bit-field cannot be modified as long as LOCK level 2 has been - programmed. */ - - uint32_t OSSIState; /*!< Specifies the Off-State used in Idle state. - This parameter can be a value of @ref TIM_LL_EC_OSSI - - This feature can be modified afterwards using unitary function - @ref LL_TIM_SetOffStates() - - @note This bit-field cannot be modified as long as LOCK level 2 has been - programmed. */ - - uint32_t LockLevel; /*!< Specifies the LOCK level parameters. - This parameter can be a value of @ref TIM_LL_EC_LOCKLEVEL - - @note The LOCK bits can be written only once after the reset. Once the TIMx_BDTR - register has been written, their content is frozen until the next reset.*/ - - uint8_t DeadTime; /*!< Specifies the delay time between the switching-off and the - switching-on of the outputs. - This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF. - - This feature can be modified afterwards using unitary function - @ref LL_TIM_OC_SetDeadTime() - - @note This bit-field can not be modified as long as LOCK level 1, 2 or 3 has been - programmed. */ - - uint16_t BreakState; /*!< Specifies whether the TIM Break input is enabled or not. - This parameter can be a value of @ref TIM_LL_EC_BREAK_ENABLE - - This feature can be modified afterwards using unitary functions - @ref LL_TIM_EnableBRK() or @ref LL_TIM_DisableBRK() - - @note This bit-field can not be modified as long as LOCK level 1 has been - programmed. */ - - uint32_t BreakPolarity; /*!< Specifies the TIM Break Input pin polarity. - This parameter can be a value of @ref TIM_LL_EC_BREAK_POLARITY - - This feature can be modified afterwards using unitary function - @ref LL_TIM_ConfigBRK() - - @note This bit-field can not be modified as long as LOCK level 1 has been - programmed. */ - - uint32_t AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not. - This parameter can be a value of @ref TIM_LL_EC_AUTOMATICOUTPUT_ENABLE - - This feature can be modified afterwards using unitary functions - @ref LL_TIM_EnableAutomaticOutput() or @ref LL_TIM_DisableAutomaticOutput() - - @note This bit-field can not be modified as long as LOCK level 1 has been - programmed. */ -} LL_TIM_BDTR_InitTypeDef; - -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup TIM_LL_Exported_Constants TIM Exported Constants - * @{ - */ - -/** @defgroup TIM_LL_EC_GET_FLAG Get Flags Defines - * @brief Flags defines which can be used with LL_TIM_ReadReg function. - * @{ - */ -#define LL_TIM_SR_UIF TIM_SR_UIF /*!< Update interrupt flag */ -#define LL_TIM_SR_CC1IF TIM_SR_CC1IF /*!< Capture/compare 1 interrupt flag */ -#define LL_TIM_SR_CC2IF TIM_SR_CC2IF /*!< Capture/compare 2 interrupt flag */ -#define LL_TIM_SR_CC3IF TIM_SR_CC3IF /*!< Capture/compare 3 interrupt flag */ -#define LL_TIM_SR_CC4IF TIM_SR_CC4IF /*!< Capture/compare 4 interrupt flag */ -#define LL_TIM_SR_COMIF TIM_SR_COMIF /*!< COM interrupt flag */ -#define LL_TIM_SR_TIF TIM_SR_TIF /*!< Trigger interrupt flag */ -#define LL_TIM_SR_BIF TIM_SR_BIF /*!< Break interrupt flag */ -#define LL_TIM_SR_CC1OF TIM_SR_CC1OF /*!< Capture/Compare 1 overcapture flag */ -#define LL_TIM_SR_CC2OF TIM_SR_CC2OF /*!< Capture/Compare 2 overcapture flag */ -#define LL_TIM_SR_CC3OF TIM_SR_CC3OF /*!< Capture/Compare 3 overcapture flag */ -#define LL_TIM_SR_CC4OF TIM_SR_CC4OF /*!< Capture/Compare 4 overcapture flag */ -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup TIM_LL_EC_BREAK_ENABLE Break Enable - * @{ - */ -#define LL_TIM_BREAK_DISABLE 0x00000000U /*!< Break function disabled */ -#define LL_TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break function enabled */ -/** - * @} - */ - -/** @defgroup TIM_LL_EC_AUTOMATICOUTPUT_ENABLE Automatic output enable - * @{ - */ -#define LL_TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ -#define LL_TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event */ -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** @defgroup TIM_LL_EC_IT IT Defines - * @brief IT defines which can be used with LL_TIM_ReadReg and LL_TIM_WriteReg functions. - * @{ - */ -#define LL_TIM_DIER_UIE TIM_DIER_UIE /*!< Update interrupt enable */ -#define LL_TIM_DIER_CC1IE TIM_DIER_CC1IE /*!< Capture/compare 1 interrupt enable */ -#define LL_TIM_DIER_CC2IE TIM_DIER_CC2IE /*!< Capture/compare 2 interrupt enable */ -#define LL_TIM_DIER_CC3IE TIM_DIER_CC3IE /*!< Capture/compare 3 interrupt enable */ -#define LL_TIM_DIER_CC4IE TIM_DIER_CC4IE /*!< Capture/compare 4 interrupt enable */ -#define LL_TIM_DIER_COMIE TIM_DIER_COMIE /*!< COM interrupt enable */ -#define LL_TIM_DIER_TIE TIM_DIER_TIE /*!< Trigger interrupt enable */ -#define LL_TIM_DIER_BIE TIM_DIER_BIE /*!< Break interrupt enable */ -/** - * @} - */ - -/** @defgroup TIM_LL_EC_UPDATESOURCE Update Source - * @{ - */ -#define LL_TIM_UPDATESOURCE_REGULAR 0x00000000U /*!< Counter overflow/underflow, Setting the UG bit or Update generation through the slave mode controller generates an update request */ -#define LL_TIM_UPDATESOURCE_COUNTER TIM_CR1_URS /*!< Only counter overflow/underflow generates an update request */ -/** - * @} - */ - -/** @defgroup TIM_LL_EC_ONEPULSEMODE One Pulse Mode - * @{ - */ -#define LL_TIM_ONEPULSEMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */ -#define LL_TIM_ONEPULSEMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */ -/** - * @} - */ - -/** @defgroup TIM_LL_EC_COUNTERMODE Counter Mode - * @{ - */ -#define LL_TIM_COUNTERMODE_UP 0x00000000U /*!TIMx_CCRy else active.*/ -#define LL_TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!TIMx_CCRy else inactive*/ -/** - * @} - */ - -/** @defgroup TIM_LL_EC_OCPOLARITY Output Configuration Polarity - * @{ - */ -#define LL_TIM_OCPOLARITY_HIGH 0x00000000U /*!< OCxactive high*/ -#define LL_TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< OCxactive low*/ -/** - * @} - */ - -/** @defgroup TIM_LL_EC_OCIDLESTATE Output Configuration Idle State - * @{ - */ -#define LL_TIM_OCIDLESTATE_LOW 0x00000000U /*!__REG__, (__VALUE__)) - -/** - * @brief Read a value in TIM register. - * @param __INSTANCE__ TIM Instance - * @param __REG__ Register to be read - * @retval Register value - */ -#define LL_TIM_ReadReg(__INSTANCE__, __REG__) READ_REG((__INSTANCE__)->__REG__) -/** - * @} - */ - -/** @defgroup TIM_LL_EM_Exported_Macros Exported_Macros - * @{ - */ - -/** - * @brief HELPER macro calculating DTG[0:7] in the TIMx_BDTR register to achieve the requested dead time duration. - * @note ex: @ref __LL_TIM_CALC_DEADTIME (80000000, @ref LL_TIM_GetClockDivision (), 120); - * @param __TIMCLK__ timer input clock frequency (in Hz) - * @param __CKD__ This parameter can be one of the following values: - * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 - * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 - * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 - * @param __DT__ deadtime duration (in ns) - * @retval DTG[0:7] - */ -#define __LL_TIM_CALC_DEADTIME(__TIMCLK__, __CKD__, __DT__) \ - ( (((uint64_t)((__DT__)*1000U)) < ((DT_DELAY_1+1U) * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ - (uint8_t)(((uint64_t)((__DT__)*1000U) / TIM_CALC_DTS((__TIMCLK__), (__CKD__))) & DT_DELAY_1) : \ - (((uint64_t)((__DT__)*1000U)) < ((64U + (DT_DELAY_2+1U)) * 2U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ - (uint8_t)(DT_RANGE_2 | ((uint8_t)((uint8_t)((((uint64_t)((__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \ - (__CKD__))) >> 1U) - (uint8_t) 64) & DT_DELAY_2)) :\ - (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_3+1U)) * 8U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ - (uint8_t)(DT_RANGE_3 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \ - (__CKD__))) >> 3U) - (uint8_t) 32) & DT_DELAY_3)) :\ - (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_4+1U)) * 16U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ - (uint8_t)(DT_RANGE_4 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \ - (__CKD__))) >> 4U) - (uint8_t) 32) & DT_DELAY_4)) :\ - 0U) - -/** - * @brief HELPER macro calculating the prescaler value to achieve the required counter clock frequency. - * @note ex: @ref __LL_TIM_CALC_PSC (80000000, 1000000); - * @param __TIMCLK__ timer input clock frequency (in Hz) - * @param __CNTCLK__ counter clock frequency (in Hz) - * @retval Prescaler value (between Min_Data=0 and Max_Data=65535) - */ -#define __LL_TIM_CALC_PSC(__TIMCLK__, __CNTCLK__) \ - (((__TIMCLK__) >= (__CNTCLK__)) ? (uint32_t)((((__TIMCLK__) + (__CNTCLK__)/2U)/(__CNTCLK__)) - 1U) : 0U) - -/** - * @brief HELPER macro calculating the auto-reload value to achieve the required output signal frequency. - * @note ex: @ref __LL_TIM_CALC_ARR (1000000, @ref LL_TIM_GetPrescaler (), 10000); - * @param __TIMCLK__ timer input clock frequency (in Hz) - * @param __PSC__ prescaler - * @param __FREQ__ output signal frequency (in Hz) - * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) - */ -#define __LL_TIM_CALC_ARR(__TIMCLK__, __PSC__, __FREQ__) \ - ((((__TIMCLK__)/((__PSC__) + 1U)) >= (__FREQ__)) ? (((__TIMCLK__)/((__FREQ__) * ((__PSC__) + 1U))) - 1U) : 0U) - -/** - * @brief HELPER macro calculating the compare value required to achieve the required timer output compare - * active/inactive delay. - * @note ex: @ref __LL_TIM_CALC_DELAY (1000000, @ref LL_TIM_GetPrescaler (), 10); - * @param __TIMCLK__ timer input clock frequency (in Hz) - * @param __PSC__ prescaler - * @param __DELAY__ timer output compare active/inactive delay (in us) - * @retval Compare value (between Min_Data=0 and Max_Data=65535) - */ -#define __LL_TIM_CALC_DELAY(__TIMCLK__, __PSC__, __DELAY__) \ - ((uint32_t)(((uint64_t)(__TIMCLK__) * (uint64_t)(__DELAY__)) \ - / ((uint64_t)1000000U * (uint64_t)((__PSC__) + 1U)))) - -/** - * @brief HELPER macro calculating the auto-reload value to achieve the required pulse duration - * (when the timer operates in one pulse mode). - * @note ex: @ref __LL_TIM_CALC_PULSE (1000000, @ref LL_TIM_GetPrescaler (), 10, 20); - * @param __TIMCLK__ timer input clock frequency (in Hz) - * @param __PSC__ prescaler - * @param __DELAY__ timer output compare active/inactive delay (in us) - * @param __PULSE__ pulse duration (in us) - * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) - */ -#define __LL_TIM_CALC_PULSE(__TIMCLK__, __PSC__, __DELAY__, __PULSE__) \ - ((uint32_t)(__LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__PULSE__)) \ - + __LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__DELAY__)))) - -/** - * @brief HELPER macro retrieving the ratio of the input capture prescaler - * @note ex: @ref __LL_TIM_GET_ICPSC_RATIO (@ref LL_TIM_IC_GetPrescaler ()); - * @param __ICPSC__ This parameter can be one of the following values: - * @arg @ref LL_TIM_ICPSC_DIV1 - * @arg @ref LL_TIM_ICPSC_DIV2 - * @arg @ref LL_TIM_ICPSC_DIV4 - * @arg @ref LL_TIM_ICPSC_DIV8 - * @retval Input capture prescaler ratio (1, 2, 4 or 8) - */ -#define __LL_TIM_GET_ICPSC_RATIO(__ICPSC__) \ - ((uint32_t)(0x01U << (((__ICPSC__) >> 16U) >> TIM_CCMR1_IC1PSC_Pos))) - - -/** - * @} - */ - - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup TIM_LL_Exported_Functions TIM Exported Functions - * @{ - */ - -/** @defgroup TIM_LL_EF_Time_Base Time Base configuration - * @{ - */ -/** - * @brief Enable timer counter. - * @rmtoll CR1 CEN LL_TIM_EnableCounter - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_EnableCounter(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->CR1, TIM_CR1_CEN); -} - -/** - * @brief Disable timer counter. - * @rmtoll CR1 CEN LL_TIM_DisableCounter - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_DisableCounter(TIM_TypeDef *TIMx) -{ - CLEAR_BIT(TIMx->CR1, TIM_CR1_CEN); -} - -/** - * @brief Indicates whether the timer counter is enabled. - * @rmtoll CR1 CEN LL_TIM_IsEnabledCounter - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsEnabledCounter(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->CR1, TIM_CR1_CEN) == (TIM_CR1_CEN)) ? 1UL : 0UL); -} - -/** - * @brief Enable update event generation. - * @rmtoll CR1 UDIS LL_TIM_EnableUpdateEvent - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_EnableUpdateEvent(TIM_TypeDef *TIMx) -{ - CLEAR_BIT(TIMx->CR1, TIM_CR1_UDIS); -} - -/** - * @brief Disable update event generation. - * @rmtoll CR1 UDIS LL_TIM_DisableUpdateEvent - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_DisableUpdateEvent(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->CR1, TIM_CR1_UDIS); -} - -/** - * @brief Indicates whether update event generation is enabled. - * @rmtoll CR1 UDIS LL_TIM_IsEnabledUpdateEvent - * @param TIMx Timer instance - * @retval Inverted state of bit (0 or 1). - */ -__STATIC_INLINE uint32_t LL_TIM_IsEnabledUpdateEvent(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->CR1, TIM_CR1_UDIS) == (uint32_t)RESET) ? 1UL : 0UL); -} - -/** - * @brief Set update event source - * @note Update event source set to LL_TIM_UPDATESOURCE_REGULAR: any of the following events - * generate an update interrupt or DMA request if enabled: - * - Counter overflow/underflow - * - Setting the UG bit - * - Update generation through the slave mode controller - * @note Update event source set to LL_TIM_UPDATESOURCE_COUNTER: only counter - * overflow/underflow generates an update interrupt or DMA request if enabled. - * @rmtoll CR1 URS LL_TIM_SetUpdateSource - * @param TIMx Timer instance - * @param UpdateSource This parameter can be one of the following values: - * @arg @ref LL_TIM_UPDATESOURCE_REGULAR - * @arg @ref LL_TIM_UPDATESOURCE_COUNTER - * @retval None - */ -__STATIC_INLINE void LL_TIM_SetUpdateSource(TIM_TypeDef *TIMx, uint32_t UpdateSource) -{ - MODIFY_REG(TIMx->CR1, TIM_CR1_URS, UpdateSource); -} - -/** - * @brief Get actual event update source - * @rmtoll CR1 URS LL_TIM_GetUpdateSource - * @param TIMx Timer instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_TIM_UPDATESOURCE_REGULAR - * @arg @ref LL_TIM_UPDATESOURCE_COUNTER - */ -__STATIC_INLINE uint32_t LL_TIM_GetUpdateSource(TIM_TypeDef *TIMx) -{ - return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_URS)); -} - -/** - * @brief Set one pulse mode (one shot v.s. repetitive). - * @rmtoll CR1 OPM LL_TIM_SetOnePulseMode - * @param TIMx Timer instance - * @param OnePulseMode This parameter can be one of the following values: - * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE - * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE - * @retval None - */ -__STATIC_INLINE void LL_TIM_SetOnePulseMode(TIM_TypeDef *TIMx, uint32_t OnePulseMode) -{ - MODIFY_REG(TIMx->CR1, TIM_CR1_OPM, OnePulseMode); -} - -/** - * @brief Get actual one pulse mode. - * @rmtoll CR1 OPM LL_TIM_GetOnePulseMode - * @param TIMx Timer instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE - * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE - */ -__STATIC_INLINE uint32_t LL_TIM_GetOnePulseMode(TIM_TypeDef *TIMx) -{ - return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_OPM)); -} - -/** - * @brief Set the timer counter counting mode. - * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to - * check whether or not the counter mode selection feature is supported - * by a timer instance. - * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) - * requires a timer reset to avoid unexpected direction - * due to DIR bit readonly in center aligned mode. - * @rmtoll CR1 DIR LL_TIM_SetCounterMode\n - * CR1 CMS LL_TIM_SetCounterMode - * @param TIMx Timer instance - * @param CounterMode This parameter can be one of the following values: - * @arg @ref LL_TIM_COUNTERMODE_UP - * @arg @ref LL_TIM_COUNTERMODE_DOWN - * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP - * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN - * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN - * @retval None - */ -__STATIC_INLINE void LL_TIM_SetCounterMode(TIM_TypeDef *TIMx, uint32_t CounterMode) -{ - MODIFY_REG(TIMx->CR1, (TIM_CR1_DIR | TIM_CR1_CMS), CounterMode); -} - -/** - * @brief Get actual counter mode. - * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to - * check whether or not the counter mode selection feature is supported - * by a timer instance. - * @rmtoll CR1 DIR LL_TIM_GetCounterMode\n - * CR1 CMS LL_TIM_GetCounterMode - * @param TIMx Timer instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_TIM_COUNTERMODE_UP - * @arg @ref LL_TIM_COUNTERMODE_DOWN - * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP - * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN - * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN - */ -__STATIC_INLINE uint32_t LL_TIM_GetCounterMode(TIM_TypeDef *TIMx) -{ - uint32_t counter_mode; - - counter_mode = (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CMS)); - - if (counter_mode == 0U) - { - counter_mode = (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR)); - } - - return counter_mode; -} - -/** - * @brief Enable auto-reload (ARR) preload. - * @rmtoll CR1 ARPE LL_TIM_EnableARRPreload - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_EnableARRPreload(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->CR1, TIM_CR1_ARPE); -} - -/** - * @brief Disable auto-reload (ARR) preload. - * @rmtoll CR1 ARPE LL_TIM_DisableARRPreload - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_DisableARRPreload(TIM_TypeDef *TIMx) -{ - CLEAR_BIT(TIMx->CR1, TIM_CR1_ARPE); -} - -/** - * @brief Indicates whether auto-reload (ARR) preload is enabled. - * @rmtoll CR1 ARPE LL_TIM_IsEnabledARRPreload - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsEnabledARRPreload(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->CR1, TIM_CR1_ARPE) == (TIM_CR1_ARPE)) ? 1UL : 0UL); -} - -/** - * @brief Set the division ratio between the timer clock and the sampling clock used by the dead-time generators - * (when supported) and the digital filters. - * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check - * whether or not the clock division feature is supported by the timer - * instance. - * @rmtoll CR1 CKD LL_TIM_SetClockDivision - * @param TIMx Timer instance - * @param ClockDivision This parameter can be one of the following values: - * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 - * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 - * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 - * @retval None - */ -__STATIC_INLINE void LL_TIM_SetClockDivision(TIM_TypeDef *TIMx, uint32_t ClockDivision) -{ - MODIFY_REG(TIMx->CR1, TIM_CR1_CKD, ClockDivision); -} - -/** - * @brief Get the actual division ratio between the timer clock and the sampling clock used by the dead-time - * generators (when supported) and the digital filters. - * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check - * whether or not the clock division feature is supported by the timer - * instance. - * @rmtoll CR1 CKD LL_TIM_GetClockDivision - * @param TIMx Timer instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 - * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 - * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 - */ -__STATIC_INLINE uint32_t LL_TIM_GetClockDivision(TIM_TypeDef *TIMx) -{ - return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CKD)); -} - -/** - * @brief Set the counter value. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. - * @rmtoll CNT CNT LL_TIM_SetCounter - * @param TIMx Timer instance - * @param Counter Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF) - * @retval None - */ -__STATIC_INLINE void LL_TIM_SetCounter(TIM_TypeDef *TIMx, uint32_t Counter) -{ - WRITE_REG(TIMx->CNT, Counter); -} - -/** - * @brief Get the counter value. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. - * @rmtoll CNT CNT LL_TIM_GetCounter - * @param TIMx Timer instance - * @retval Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF) - */ -__STATIC_INLINE uint32_t LL_TIM_GetCounter(TIM_TypeDef *TIMx) -{ - return (uint32_t)(READ_REG(TIMx->CNT)); -} - -/** - * @brief Get the current direction of the counter - * @rmtoll CR1 DIR LL_TIM_GetDirection - * @param TIMx Timer instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_TIM_COUNTERDIRECTION_UP - * @arg @ref LL_TIM_COUNTERDIRECTION_DOWN - */ -__STATIC_INLINE uint32_t LL_TIM_GetDirection(TIM_TypeDef *TIMx) -{ - return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR)); -} - -/** - * @brief Set the prescaler value. - * @note The counter clock frequency CK_CNT is equal to fCK_PSC / (PSC[15:0] + 1). - * @note The prescaler can be changed on the fly as this control register is buffered. The new - * prescaler ratio is taken into account at the next update event. - * @note Helper macro @ref __LL_TIM_CALC_PSC can be used to calculate the Prescaler parameter - * @rmtoll PSC PSC LL_TIM_SetPrescaler - * @param TIMx Timer instance - * @param Prescaler between Min_Data=0 and Max_Data=65535 - * @retval None - */ -__STATIC_INLINE void LL_TIM_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Prescaler) -{ - WRITE_REG(TIMx->PSC, Prescaler); -} - -/** - * @brief Get the prescaler value. - * @rmtoll PSC PSC LL_TIM_GetPrescaler - * @param TIMx Timer instance - * @retval Prescaler value between Min_Data=0 and Max_Data=65535 - */ -__STATIC_INLINE uint32_t LL_TIM_GetPrescaler(TIM_TypeDef *TIMx) -{ - return (uint32_t)(READ_REG(TIMx->PSC)); -} - -/** - * @brief Set the auto-reload value. - * @note The counter is blocked while the auto-reload value is null. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. - * @note Helper macro @ref __LL_TIM_CALC_ARR can be used to calculate the AutoReload parameter - * @rmtoll ARR ARR LL_TIM_SetAutoReload - * @param TIMx Timer instance - * @param AutoReload between Min_Data=0 and Max_Data=65535 - * @retval None - */ -__STATIC_INLINE void LL_TIM_SetAutoReload(TIM_TypeDef *TIMx, uint32_t AutoReload) -{ - WRITE_REG(TIMx->ARR, AutoReload); -} - -/** - * @brief Get the auto-reload value. - * @rmtoll ARR ARR LL_TIM_GetAutoReload - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. - * @param TIMx Timer instance - * @retval Auto-reload value - */ -__STATIC_INLINE uint32_t LL_TIM_GetAutoReload(TIM_TypeDef *TIMx) -{ - return (uint32_t)(READ_REG(TIMx->ARR)); -} - -/** - * @brief Set the repetition counter value. - * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a repetition counter. - * @rmtoll RCR REP LL_TIM_SetRepetitionCounter - * @param TIMx Timer instance - * @param RepetitionCounter between Min_Data=0 and Max_Data=255 or 65535 for advanced timer. - * @retval None - */ -__STATIC_INLINE void LL_TIM_SetRepetitionCounter(TIM_TypeDef *TIMx, uint32_t RepetitionCounter) -{ - WRITE_REG(TIMx->RCR, RepetitionCounter); -} - -/** - * @brief Get the repetition counter value. - * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a repetition counter. - * @rmtoll RCR REP LL_TIM_GetRepetitionCounter - * @param TIMx Timer instance - * @retval Repetition counter value - */ -__STATIC_INLINE uint32_t LL_TIM_GetRepetitionCounter(TIM_TypeDef *TIMx) -{ - return (uint32_t)(READ_REG(TIMx->RCR)); -} - -/** - * @} - */ - -/** @defgroup TIM_LL_EF_Capture_Compare Capture Compare configuration - * @{ - */ -/** - * @brief Enable the capture/compare control bits (CCxE, CCxNE and OCxM) preload. - * @note CCxE, CCxNE and OCxM bits are preloaded, after having been written, - * they are updated only when a commutation event (COM) occurs. - * @note Only on channels that have a complementary output. - * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check - * whether or not a timer instance is able to generate a commutation event. - * @rmtoll CR2 CCPC LL_TIM_CC_EnablePreload - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_CC_EnablePreload(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->CR2, TIM_CR2_CCPC); -} - -/** - * @brief Disable the capture/compare control bits (CCxE, CCxNE and OCxM) preload. - * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check - * whether or not a timer instance is able to generate a commutation event. - * @rmtoll CR2 CCPC LL_TIM_CC_DisablePreload - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_CC_DisablePreload(TIM_TypeDef *TIMx) -{ - CLEAR_BIT(TIMx->CR2, TIM_CR2_CCPC); -} - -/** - * @brief Set the updated source of the capture/compare control bits (CCxE, CCxNE and OCxM). - * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check - * whether or not a timer instance is able to generate a commutation event. - * @rmtoll CR2 CCUS LL_TIM_CC_SetUpdate - * @param TIMx Timer instance - * @param CCUpdateSource This parameter can be one of the following values: - * @arg @ref LL_TIM_CCUPDATESOURCE_COMG_ONLY - * @arg @ref LL_TIM_CCUPDATESOURCE_COMG_AND_TRGI - * @retval None - */ -__STATIC_INLINE void LL_TIM_CC_SetUpdate(TIM_TypeDef *TIMx, uint32_t CCUpdateSource) -{ - MODIFY_REG(TIMx->CR2, TIM_CR2_CCUS, CCUpdateSource); -} - -/** - * @brief Set the trigger of the capture/compare DMA request. - * @rmtoll CR2 CCDS LL_TIM_CC_SetDMAReqTrigger - * @param TIMx Timer instance - * @param DMAReqTrigger This parameter can be one of the following values: - * @arg @ref LL_TIM_CCDMAREQUEST_CC - * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE - * @retval None - */ -__STATIC_INLINE void LL_TIM_CC_SetDMAReqTrigger(TIM_TypeDef *TIMx, uint32_t DMAReqTrigger) -{ - MODIFY_REG(TIMx->CR2, TIM_CR2_CCDS, DMAReqTrigger); -} - -/** - * @brief Get actual trigger of the capture/compare DMA request. - * @rmtoll CR2 CCDS LL_TIM_CC_GetDMAReqTrigger - * @param TIMx Timer instance - * @retval Returned value can be one of the following values: - * @arg @ref LL_TIM_CCDMAREQUEST_CC - * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE - */ -__STATIC_INLINE uint32_t LL_TIM_CC_GetDMAReqTrigger(TIM_TypeDef *TIMx) -{ - return (uint32_t)(READ_BIT(TIMx->CR2, TIM_CR2_CCDS)); -} - -/** - * @brief Set the lock level to freeze the - * configuration of several capture/compare parameters. - * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not - * the lock mechanism is supported by a timer instance. - * @rmtoll BDTR LOCK LL_TIM_CC_SetLockLevel - * @param TIMx Timer instance - * @param LockLevel This parameter can be one of the following values: - * @arg @ref LL_TIM_LOCKLEVEL_OFF - * @arg @ref LL_TIM_LOCKLEVEL_1 - * @arg @ref LL_TIM_LOCKLEVEL_2 - * @arg @ref LL_TIM_LOCKLEVEL_3 - * @retval None - */ -__STATIC_INLINE void LL_TIM_CC_SetLockLevel(TIM_TypeDef *TIMx, uint32_t LockLevel) -{ - MODIFY_REG(TIMx->BDTR, TIM_BDTR_LOCK, LockLevel); -} - -/** - * @brief Enable capture/compare channels. - * @rmtoll CCER CC1E LL_TIM_CC_EnableChannel\n - * CCER CC1NE LL_TIM_CC_EnableChannel\n - * CCER CC2E LL_TIM_CC_EnableChannel\n - * CCER CC2NE LL_TIM_CC_EnableChannel\n - * CCER CC3E LL_TIM_CC_EnableChannel\n - * CCER CC3NE LL_TIM_CC_EnableChannel\n - * CCER CC4E LL_TIM_CC_EnableChannel - * @param TIMx Timer instance - * @param Channels This parameter can be a combination of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH1N - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH2N - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH3N - * @arg @ref LL_TIM_CHANNEL_CH4 - * @retval None - */ -__STATIC_INLINE void LL_TIM_CC_EnableChannel(TIM_TypeDef *TIMx, uint32_t Channels) -{ - SET_BIT(TIMx->CCER, Channels); -} - -/** - * @brief Disable capture/compare channels. - * @rmtoll CCER CC1E LL_TIM_CC_DisableChannel\n - * CCER CC1NE LL_TIM_CC_DisableChannel\n - * CCER CC2E LL_TIM_CC_DisableChannel\n - * CCER CC2NE LL_TIM_CC_DisableChannel\n - * CCER CC3E LL_TIM_CC_DisableChannel\n - * CCER CC3NE LL_TIM_CC_DisableChannel\n - * CCER CC4E LL_TIM_CC_DisableChannel - * @param TIMx Timer instance - * @param Channels This parameter can be a combination of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH1N - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH2N - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH3N - * @arg @ref LL_TIM_CHANNEL_CH4 - * @retval None - */ -__STATIC_INLINE void LL_TIM_CC_DisableChannel(TIM_TypeDef *TIMx, uint32_t Channels) -{ - CLEAR_BIT(TIMx->CCER, Channels); -} - -/** - * @brief Indicate whether channel(s) is(are) enabled. - * @rmtoll CCER CC1E LL_TIM_CC_IsEnabledChannel\n - * CCER CC1NE LL_TIM_CC_IsEnabledChannel\n - * CCER CC2E LL_TIM_CC_IsEnabledChannel\n - * CCER CC2NE LL_TIM_CC_IsEnabledChannel\n - * CCER CC3E LL_TIM_CC_IsEnabledChannel\n - * CCER CC3NE LL_TIM_CC_IsEnabledChannel\n - * CCER CC4E LL_TIM_CC_IsEnabledChannel - * @param TIMx Timer instance - * @param Channels This parameter can be a combination of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH1N - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH2N - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH3N - * @arg @ref LL_TIM_CHANNEL_CH4 - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_CC_IsEnabledChannel(TIM_TypeDef *TIMx, uint32_t Channels) -{ - return ((READ_BIT(TIMx->CCER, Channels) == (Channels)) ? 1UL : 0UL); -} - -/** - * @} - */ - -/** @defgroup TIM_LL_EF_Output_Channel Output channel configuration - * @{ - */ -/** - * @brief Configure an output channel. - * @rmtoll CCMR1 CC1S LL_TIM_OC_ConfigOutput\n - * CCMR1 CC2S LL_TIM_OC_ConfigOutput\n - * CCMR2 CC3S LL_TIM_OC_ConfigOutput\n - * CCMR2 CC4S LL_TIM_OC_ConfigOutput\n - * CCER CC1P LL_TIM_OC_ConfigOutput\n - * CCER CC2P LL_TIM_OC_ConfigOutput\n - * CCER CC3P LL_TIM_OC_ConfigOutput\n - * CCER CC4P LL_TIM_OC_ConfigOutput\n - * CR2 OIS1 LL_TIM_OC_ConfigOutput\n - * CR2 OIS2 LL_TIM_OC_ConfigOutput\n - * CR2 OIS3 LL_TIM_OC_ConfigOutput\n - * CR2 OIS4 LL_TIM_OC_ConfigOutput - * @param TIMx Timer instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH4 - * @param Configuration This parameter must be a combination of all the following values: - * @arg @ref LL_TIM_OCPOLARITY_HIGH or @ref LL_TIM_OCPOLARITY_LOW - * @arg @ref LL_TIM_OCIDLESTATE_LOW or @ref LL_TIM_OCIDLESTATE_HIGH - * @retval None - */ -__STATIC_INLINE void LL_TIM_OC_ConfigOutput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration) -{ - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); - CLEAR_BIT(*pReg, (TIM_CCMR1_CC1S << SHIFT_TAB_OCxx[iChannel])); - MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), - (Configuration & TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]); - MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]), - (Configuration & TIM_CR2_OIS1) << SHIFT_TAB_OISx[iChannel]); -} - -/** - * @brief Define the behavior of the output reference signal OCxREF from which - * OCx and OCxN (when relevant) are derived. - * @rmtoll CCMR1 OC1M LL_TIM_OC_SetMode\n - * CCMR1 OC2M LL_TIM_OC_SetMode\n - * CCMR2 OC3M LL_TIM_OC_SetMode\n - * CCMR2 OC4M LL_TIM_OC_SetMode - * @param TIMx Timer instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH4 - * @param Mode This parameter can be one of the following values: - * @arg @ref LL_TIM_OCMODE_FROZEN - * @arg @ref LL_TIM_OCMODE_ACTIVE - * @arg @ref LL_TIM_OCMODE_INACTIVE - * @arg @ref LL_TIM_OCMODE_TOGGLE - * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE - * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE - * @arg @ref LL_TIM_OCMODE_PWM1 - * @arg @ref LL_TIM_OCMODE_PWM2 - * @retval None - */ -__STATIC_INLINE void LL_TIM_OC_SetMode(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Mode) -{ - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); - MODIFY_REG(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel]), Mode << SHIFT_TAB_OCxx[iChannel]); -} - -/** - * @brief Get the output compare mode of an output channel. - * @rmtoll CCMR1 OC1M LL_TIM_OC_GetMode\n - * CCMR1 OC2M LL_TIM_OC_GetMode\n - * CCMR2 OC3M LL_TIM_OC_GetMode\n - * CCMR2 OC4M LL_TIM_OC_GetMode - * @param TIMx Timer instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH4 - * @retval Returned value can be one of the following values: - * @arg @ref LL_TIM_OCMODE_FROZEN - * @arg @ref LL_TIM_OCMODE_ACTIVE - * @arg @ref LL_TIM_OCMODE_INACTIVE - * @arg @ref LL_TIM_OCMODE_TOGGLE - * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE - * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE - * @arg @ref LL_TIM_OCMODE_PWM1 - * @arg @ref LL_TIM_OCMODE_PWM2 - */ -__STATIC_INLINE uint32_t LL_TIM_OC_GetMode(TIM_TypeDef *TIMx, uint32_t Channel) -{ - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); - return (READ_BIT(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel])) >> SHIFT_TAB_OCxx[iChannel]); -} - -/** - * @brief Set the polarity of an output channel. - * @rmtoll CCER CC1P LL_TIM_OC_SetPolarity\n - * CCER CC1NP LL_TIM_OC_SetPolarity\n - * CCER CC2P LL_TIM_OC_SetPolarity\n - * CCER CC2NP LL_TIM_OC_SetPolarity\n - * CCER CC3P LL_TIM_OC_SetPolarity\n - * CCER CC3NP LL_TIM_OC_SetPolarity\n - * CCER CC4P LL_TIM_OC_SetPolarity - * @param TIMx Timer instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH1N - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH2N - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH3N - * @arg @ref LL_TIM_CHANNEL_CH4 - * @param Polarity This parameter can be one of the following values: - * @arg @ref LL_TIM_OCPOLARITY_HIGH - * @arg @ref LL_TIM_OCPOLARITY_LOW - * @retval None - */ -__STATIC_INLINE void LL_TIM_OC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Polarity) -{ - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), Polarity << SHIFT_TAB_CCxP[iChannel]); -} - -/** - * @brief Get the polarity of an output channel. - * @rmtoll CCER CC1P LL_TIM_OC_GetPolarity\n - * CCER CC1NP LL_TIM_OC_GetPolarity\n - * CCER CC2P LL_TIM_OC_GetPolarity\n - * CCER CC2NP LL_TIM_OC_GetPolarity\n - * CCER CC3P LL_TIM_OC_GetPolarity\n - * CCER CC3NP LL_TIM_OC_GetPolarity\n - * CCER CC4P LL_TIM_OC_GetPolarity - * @param TIMx Timer instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH1N - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH2N - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH3N - * @arg @ref LL_TIM_CHANNEL_CH4 - * @retval Returned value can be one of the following values: - * @arg @ref LL_TIM_OCPOLARITY_HIGH - * @arg @ref LL_TIM_OCPOLARITY_LOW - */ -__STATIC_INLINE uint32_t LL_TIM_OC_GetPolarity(TIM_TypeDef *TIMx, uint32_t Channel) -{ - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - return (READ_BIT(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel])) >> SHIFT_TAB_CCxP[iChannel]); -} - -/** - * @brief Set the IDLE state of an output channel - * @note This function is significant only for the timer instances - * supporting the break feature. Macro IS_TIM_BREAK_INSTANCE(TIMx) - * can be used to check whether or not a timer instance provides - * a break input. - * @rmtoll CR2 OIS1 LL_TIM_OC_SetIdleState\n - * CR2 OIS1N LL_TIM_OC_SetIdleState\n - * CR2 OIS2 LL_TIM_OC_SetIdleState\n - * CR2 OIS2N LL_TIM_OC_SetIdleState\n - * CR2 OIS3 LL_TIM_OC_SetIdleState\n - * CR2 OIS3N LL_TIM_OC_SetIdleState\n - * CR2 OIS4 LL_TIM_OC_SetIdleState - * @param TIMx Timer instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH1N - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH2N - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH3N - * @arg @ref LL_TIM_CHANNEL_CH4 - * @param IdleState This parameter can be one of the following values: - * @arg @ref LL_TIM_OCIDLESTATE_LOW - * @arg @ref LL_TIM_OCIDLESTATE_HIGH - * @retval None - */ -__STATIC_INLINE void LL_TIM_OC_SetIdleState(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t IdleState) -{ - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]), IdleState << SHIFT_TAB_OISx[iChannel]); -} - -/** - * @brief Get the IDLE state of an output channel - * @rmtoll CR2 OIS1 LL_TIM_OC_GetIdleState\n - * CR2 OIS1N LL_TIM_OC_GetIdleState\n - * CR2 OIS2 LL_TIM_OC_GetIdleState\n - * CR2 OIS2N LL_TIM_OC_GetIdleState\n - * CR2 OIS3 LL_TIM_OC_GetIdleState\n - * CR2 OIS3N LL_TIM_OC_GetIdleState\n - * CR2 OIS4 LL_TIM_OC_GetIdleState - * @param TIMx Timer instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH1N - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH2N - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH3N - * @arg @ref LL_TIM_CHANNEL_CH4 - * @retval Returned value can be one of the following values: - * @arg @ref LL_TIM_OCIDLESTATE_LOW - * @arg @ref LL_TIM_OCIDLESTATE_HIGH - */ -__STATIC_INLINE uint32_t LL_TIM_OC_GetIdleState(TIM_TypeDef *TIMx, uint32_t Channel) -{ - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - return (READ_BIT(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel])) >> SHIFT_TAB_OISx[iChannel]); -} - -/** - * @brief Enable fast mode for the output channel. - * @note Acts only if the channel is configured in PWM1 or PWM2 mode. - * @rmtoll CCMR1 OC1FE LL_TIM_OC_EnableFast\n - * CCMR1 OC2FE LL_TIM_OC_EnableFast\n - * CCMR2 OC3FE LL_TIM_OC_EnableFast\n - * CCMR2 OC4FE LL_TIM_OC_EnableFast - * @param TIMx Timer instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH4 - * @retval None - */ -__STATIC_INLINE void LL_TIM_OC_EnableFast(TIM_TypeDef *TIMx, uint32_t Channel) -{ - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); - SET_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel])); - -} - -/** - * @brief Disable fast mode for the output channel. - * @rmtoll CCMR1 OC1FE LL_TIM_OC_DisableFast\n - * CCMR1 OC2FE LL_TIM_OC_DisableFast\n - * CCMR2 OC3FE LL_TIM_OC_DisableFast\n - * CCMR2 OC4FE LL_TIM_OC_DisableFast - * @param TIMx Timer instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH4 - * @retval None - */ -__STATIC_INLINE void LL_TIM_OC_DisableFast(TIM_TypeDef *TIMx, uint32_t Channel) -{ - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); - CLEAR_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel])); - -} - -/** - * @brief Indicates whether fast mode is enabled for the output channel. - * @rmtoll CCMR1 OC1FE LL_TIM_OC_IsEnabledFast\n - * CCMR1 OC2FE LL_TIM_OC_IsEnabledFast\n - * CCMR2 OC3FE LL_TIM_OC_IsEnabledFast\n - * CCMR2 OC4FE LL_TIM_OC_IsEnabledFast\n - * @param TIMx Timer instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH4 - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledFast(TIM_TypeDef *TIMx, uint32_t Channel) -{ - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); - uint32_t bitfield = TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel]; - return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); -} - -/** - * @brief Enable compare register (TIMx_CCRx) preload for the output channel. - * @rmtoll CCMR1 OC1PE LL_TIM_OC_EnablePreload\n - * CCMR1 OC2PE LL_TIM_OC_EnablePreload\n - * CCMR2 OC3PE LL_TIM_OC_EnablePreload\n - * CCMR2 OC4PE LL_TIM_OC_EnablePreload - * @param TIMx Timer instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH4 - * @retval None - */ -__STATIC_INLINE void LL_TIM_OC_EnablePreload(TIM_TypeDef *TIMx, uint32_t Channel) -{ - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); - SET_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel])); -} - -/** - * @brief Disable compare register (TIMx_CCRx) preload for the output channel. - * @rmtoll CCMR1 OC1PE LL_TIM_OC_DisablePreload\n - * CCMR1 OC2PE LL_TIM_OC_DisablePreload\n - * CCMR2 OC3PE LL_TIM_OC_DisablePreload\n - * CCMR2 OC4PE LL_TIM_OC_DisablePreload - * @param TIMx Timer instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH4 - * @retval None - */ -__STATIC_INLINE void LL_TIM_OC_DisablePreload(TIM_TypeDef *TIMx, uint32_t Channel) -{ - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); - CLEAR_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel])); -} - -/** - * @brief Indicates whether compare register (TIMx_CCRx) preload is enabled for the output channel. - * @rmtoll CCMR1 OC1PE LL_TIM_OC_IsEnabledPreload\n - * CCMR1 OC2PE LL_TIM_OC_IsEnabledPreload\n - * CCMR2 OC3PE LL_TIM_OC_IsEnabledPreload\n - * CCMR2 OC4PE LL_TIM_OC_IsEnabledPreload\n - * @param TIMx Timer instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH4 - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledPreload(TIM_TypeDef *TIMx, uint32_t Channel) -{ - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); - uint32_t bitfield = TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel]; - return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); -} - -/** - * @brief Enable clearing the output channel on an external event. - * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode. - * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether - * or not a timer instance can clear the OCxREF signal on an external event. - * @rmtoll CCMR1 OC1CE LL_TIM_OC_EnableClear\n - * CCMR1 OC2CE LL_TIM_OC_EnableClear\n - * CCMR2 OC3CE LL_TIM_OC_EnableClear\n - * CCMR2 OC4CE LL_TIM_OC_EnableClear - * @param TIMx Timer instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH4 - * @retval None - */ -__STATIC_INLINE void LL_TIM_OC_EnableClear(TIM_TypeDef *TIMx, uint32_t Channel) -{ - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); - SET_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel])); -} - -/** - * @brief Disable clearing the output channel on an external event. - * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether - * or not a timer instance can clear the OCxREF signal on an external event. - * @rmtoll CCMR1 OC1CE LL_TIM_OC_DisableClear\n - * CCMR1 OC2CE LL_TIM_OC_DisableClear\n - * CCMR2 OC3CE LL_TIM_OC_DisableClear\n - * CCMR2 OC4CE LL_TIM_OC_DisableClear - * @param TIMx Timer instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH4 - * @retval None - */ -__STATIC_INLINE void LL_TIM_OC_DisableClear(TIM_TypeDef *TIMx, uint32_t Channel) -{ - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); - CLEAR_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel])); -} - -/** - * @brief Indicates clearing the output channel on an external event is enabled for the output channel. - * @note This function enables clearing the output channel on an external event. - * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode. - * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether - * or not a timer instance can clear the OCxREF signal on an external event. - * @rmtoll CCMR1 OC1CE LL_TIM_OC_IsEnabledClear\n - * CCMR1 OC2CE LL_TIM_OC_IsEnabledClear\n - * CCMR2 OC3CE LL_TIM_OC_IsEnabledClear\n - * CCMR2 OC4CE LL_TIM_OC_IsEnabledClear\n - * @param TIMx Timer instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH4 - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledClear(TIM_TypeDef *TIMx, uint32_t Channel) -{ - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); - uint32_t bitfield = TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel]; - return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); -} - -/** - * @brief Set the dead-time delay (delay inserted between the rising edge of the OCxREF signal and the rising edge of - * the Ocx and OCxN signals). - * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not - * dead-time insertion feature is supported by a timer instance. - * @note Helper macro @ref __LL_TIM_CALC_DEADTIME can be used to calculate the DeadTime parameter - * @rmtoll BDTR DTG LL_TIM_OC_SetDeadTime - * @param TIMx Timer instance - * @param DeadTime between Min_Data=0 and Max_Data=255 - * @retval None - */ -__STATIC_INLINE void LL_TIM_OC_SetDeadTime(TIM_TypeDef *TIMx, uint32_t DeadTime) -{ - MODIFY_REG(TIMx->BDTR, TIM_BDTR_DTG, DeadTime); -} - -/** - * @brief Set compare value for output channel 1 (TIMx_CCR1). - * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. - * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not - * output channel 1 is supported by a timer instance. - * @rmtoll CCR1 CCR1 LL_TIM_OC_SetCompareCH1 - * @param TIMx Timer instance - * @param CompareValue between Min_Data=0 and Max_Data=65535 - * @retval None - */ -__STATIC_INLINE void LL_TIM_OC_SetCompareCH1(TIM_TypeDef *TIMx, uint32_t CompareValue) -{ - WRITE_REG(TIMx->CCR1, CompareValue); -} - -/** - * @brief Set compare value for output channel 2 (TIMx_CCR2). - * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. - * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not - * output channel 2 is supported by a timer instance. - * @rmtoll CCR2 CCR2 LL_TIM_OC_SetCompareCH2 - * @param TIMx Timer instance - * @param CompareValue between Min_Data=0 and Max_Data=65535 - * @retval None - */ -__STATIC_INLINE void LL_TIM_OC_SetCompareCH2(TIM_TypeDef *TIMx, uint32_t CompareValue) -{ - WRITE_REG(TIMx->CCR2, CompareValue); -} - -/** - * @brief Set compare value for output channel 3 (TIMx_CCR3). - * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. - * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not - * output channel is supported by a timer instance. - * @rmtoll CCR3 CCR3 LL_TIM_OC_SetCompareCH3 - * @param TIMx Timer instance - * @param CompareValue between Min_Data=0 and Max_Data=65535 - * @retval None - */ -__STATIC_INLINE void LL_TIM_OC_SetCompareCH3(TIM_TypeDef *TIMx, uint32_t CompareValue) -{ - WRITE_REG(TIMx->CCR3, CompareValue); -} - -/** - * @brief Set compare value for output channel 4 (TIMx_CCR4). - * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. - * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not - * output channel 4 is supported by a timer instance. - * @rmtoll CCR4 CCR4 LL_TIM_OC_SetCompareCH4 - * @param TIMx Timer instance - * @param CompareValue between Min_Data=0 and Max_Data=65535 - * @retval None - */ -__STATIC_INLINE void LL_TIM_OC_SetCompareCH4(TIM_TypeDef *TIMx, uint32_t CompareValue) -{ - WRITE_REG(TIMx->CCR4, CompareValue); -} - -/** - * @brief Get compare value (TIMx_CCR1) set for output channel 1. - * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. - * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not - * output channel 1 is supported by a timer instance. - * @rmtoll CCR1 CCR1 LL_TIM_OC_GetCompareCH1 - * @param TIMx Timer instance - * @retval CompareValue (between Min_Data=0 and Max_Data=65535) - */ -__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH1(TIM_TypeDef *TIMx) -{ - return (uint32_t)(READ_REG(TIMx->CCR1)); -} - -/** - * @brief Get compare value (TIMx_CCR2) set for output channel 2. - * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. - * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not - * output channel 2 is supported by a timer instance. - * @rmtoll CCR2 CCR2 LL_TIM_OC_GetCompareCH2 - * @param TIMx Timer instance - * @retval CompareValue (between Min_Data=0 and Max_Data=65535) - */ -__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH2(TIM_TypeDef *TIMx) -{ - return (uint32_t)(READ_REG(TIMx->CCR2)); -} - -/** - * @brief Get compare value (TIMx_CCR3) set for output channel 3. - * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. - * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not - * output channel 3 is supported by a timer instance. - * @rmtoll CCR3 CCR3 LL_TIM_OC_GetCompareCH3 - * @param TIMx Timer instance - * @retval CompareValue (between Min_Data=0 and Max_Data=65535) - */ -__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH3(TIM_TypeDef *TIMx) -{ - return (uint32_t)(READ_REG(TIMx->CCR3)); -} - -/** - * @brief Get compare value (TIMx_CCR4) set for output channel 4. - * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. - * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not - * output channel 4 is supported by a timer instance. - * @rmtoll CCR4 CCR4 LL_TIM_OC_GetCompareCH4 - * @param TIMx Timer instance - * @retval CompareValue (between Min_Data=0 and Max_Data=65535) - */ -__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH4(TIM_TypeDef *TIMx) -{ - return (uint32_t)(READ_REG(TIMx->CCR4)); -} - -/** - * @} - */ - -/** @defgroup TIM_LL_EF_Input_Channel Input channel configuration - * @{ - */ -/** - * @brief Configure input channel. - * @rmtoll CCMR1 CC1S LL_TIM_IC_Config\n - * CCMR1 IC1PSC LL_TIM_IC_Config\n - * CCMR1 IC1F LL_TIM_IC_Config\n - * CCMR1 CC2S LL_TIM_IC_Config\n - * CCMR1 IC2PSC LL_TIM_IC_Config\n - * CCMR1 IC2F LL_TIM_IC_Config\n - * CCMR2 CC3S LL_TIM_IC_Config\n - * CCMR2 IC3PSC LL_TIM_IC_Config\n - * CCMR2 IC3F LL_TIM_IC_Config\n - * CCMR2 CC4S LL_TIM_IC_Config\n - * CCMR2 IC4PSC LL_TIM_IC_Config\n - * CCMR2 IC4F LL_TIM_IC_Config\n - * CCER CC1P LL_TIM_IC_Config\n - * CCER CC1NP LL_TIM_IC_Config\n - * CCER CC2P LL_TIM_IC_Config\n - * CCER CC2NP LL_TIM_IC_Config\n - * CCER CC3P LL_TIM_IC_Config\n - * CCER CC3NP LL_TIM_IC_Config\n - * CCER CC4P LL_TIM_IC_Config\n - * CCER CC4NP LL_TIM_IC_Config - * @param TIMx Timer instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH4 - * @param Configuration This parameter must be a combination of all the following values: - * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI or @ref LL_TIM_ACTIVEINPUT_INDIRECTTI or @ref LL_TIM_ACTIVEINPUT_TRC - * @arg @ref LL_TIM_ICPSC_DIV1 or ... or @ref LL_TIM_ICPSC_DIV8 - * @arg @ref LL_TIM_IC_FILTER_FDIV1 or ... or @ref LL_TIM_IC_FILTER_FDIV32_N8 - * @arg @ref LL_TIM_IC_POLARITY_RISING or @ref LL_TIM_IC_POLARITY_FALLING or @ref LL_TIM_IC_POLARITY_BOTHEDGE - * @retval None - */ -__STATIC_INLINE void LL_TIM_IC_Config(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration) -{ - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); - MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), - ((Configuration >> 16U) & (TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S)) \ - << SHIFT_TAB_ICxx[iChannel]); - MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]), - (Configuration & (TIM_CCER_CC1NP | TIM_CCER_CC1P)) << SHIFT_TAB_CCxP[iChannel]); -} - -/** - * @brief Set the active input. - * @rmtoll CCMR1 CC1S LL_TIM_IC_SetActiveInput\n - * CCMR1 CC2S LL_TIM_IC_SetActiveInput\n - * CCMR2 CC3S LL_TIM_IC_SetActiveInput\n - * CCMR2 CC4S LL_TIM_IC_SetActiveInput - * @param TIMx Timer instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH4 - * @param ICActiveInput This parameter can be one of the following values: - * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI - * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI - * @arg @ref LL_TIM_ACTIVEINPUT_TRC - * @retval None - */ -__STATIC_INLINE void LL_TIM_IC_SetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICActiveInput) -{ - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); - MODIFY_REG(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), (ICActiveInput >> 16U) << SHIFT_TAB_ICxx[iChannel]); -} - -/** - * @brief Get the current active input. - * @rmtoll CCMR1 CC1S LL_TIM_IC_GetActiveInput\n - * CCMR1 CC2S LL_TIM_IC_GetActiveInput\n - * CCMR2 CC3S LL_TIM_IC_GetActiveInput\n - * CCMR2 CC4S LL_TIM_IC_GetActiveInput - * @param TIMx Timer instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH4 - * @retval Returned value can be one of the following values: - * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI - * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI - * @arg @ref LL_TIM_ACTIVEINPUT_TRC - */ -__STATIC_INLINE uint32_t LL_TIM_IC_GetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel) -{ - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); - return ((READ_BIT(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); -} - -/** - * @brief Set the prescaler of input channel. - * @rmtoll CCMR1 IC1PSC LL_TIM_IC_SetPrescaler\n - * CCMR1 IC2PSC LL_TIM_IC_SetPrescaler\n - * CCMR2 IC3PSC LL_TIM_IC_SetPrescaler\n - * CCMR2 IC4PSC LL_TIM_IC_SetPrescaler - * @param TIMx Timer instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH4 - * @param ICPrescaler This parameter can be one of the following values: - * @arg @ref LL_TIM_ICPSC_DIV1 - * @arg @ref LL_TIM_ICPSC_DIV2 - * @arg @ref LL_TIM_ICPSC_DIV4 - * @arg @ref LL_TIM_ICPSC_DIV8 - * @retval None - */ -__STATIC_INLINE void LL_TIM_IC_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPrescaler) -{ - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); - MODIFY_REG(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel]), (ICPrescaler >> 16U) << SHIFT_TAB_ICxx[iChannel]); -} - -/** - * @brief Get the current prescaler value acting on an input channel. - * @rmtoll CCMR1 IC1PSC LL_TIM_IC_GetPrescaler\n - * CCMR1 IC2PSC LL_TIM_IC_GetPrescaler\n - * CCMR2 IC3PSC LL_TIM_IC_GetPrescaler\n - * CCMR2 IC4PSC LL_TIM_IC_GetPrescaler - * @param TIMx Timer instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH4 - * @retval Returned value can be one of the following values: - * @arg @ref LL_TIM_ICPSC_DIV1 - * @arg @ref LL_TIM_ICPSC_DIV2 - * @arg @ref LL_TIM_ICPSC_DIV4 - * @arg @ref LL_TIM_ICPSC_DIV8 - */ -__STATIC_INLINE uint32_t LL_TIM_IC_GetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel) -{ - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); - return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); -} - -/** - * @brief Set the input filter duration. - * @rmtoll CCMR1 IC1F LL_TIM_IC_SetFilter\n - * CCMR1 IC2F LL_TIM_IC_SetFilter\n - * CCMR2 IC3F LL_TIM_IC_SetFilter\n - * CCMR2 IC4F LL_TIM_IC_SetFilter - * @param TIMx Timer instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH4 - * @param ICFilter This parameter can be one of the following values: - * @arg @ref LL_TIM_IC_FILTER_FDIV1 - * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2 - * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4 - * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8 - * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6 - * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8 - * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6 - * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8 - * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6 - * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8 - * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5 - * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6 - * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8 - * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5 - * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6 - * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8 - * @retval None - */ -__STATIC_INLINE void LL_TIM_IC_SetFilter(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICFilter) -{ - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); - MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel]), (ICFilter >> 16U) << SHIFT_TAB_ICxx[iChannel]); -} - -/** - * @brief Get the input filter duration. - * @rmtoll CCMR1 IC1F LL_TIM_IC_GetFilter\n - * CCMR1 IC2F LL_TIM_IC_GetFilter\n - * CCMR2 IC3F LL_TIM_IC_GetFilter\n - * CCMR2 IC4F LL_TIM_IC_GetFilter - * @param TIMx Timer instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH4 - * @retval Returned value can be one of the following values: - * @arg @ref LL_TIM_IC_FILTER_FDIV1 - * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2 - * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4 - * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8 - * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6 - * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8 - * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6 - * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8 - * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6 - * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8 - * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5 - * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6 - * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8 - * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5 - * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6 - * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8 - */ -__STATIC_INLINE uint32_t LL_TIM_IC_GetFilter(TIM_TypeDef *TIMx, uint32_t Channel) -{ - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); - return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); -} - -/** - * @brief Set the input channel polarity. - * @rmtoll CCER CC1P LL_TIM_IC_SetPolarity\n - * CCER CC1NP LL_TIM_IC_SetPolarity\n - * CCER CC2P LL_TIM_IC_SetPolarity\n - * CCER CC2NP LL_TIM_IC_SetPolarity\n - * CCER CC3P LL_TIM_IC_SetPolarity\n - * CCER CC3NP LL_TIM_IC_SetPolarity\n - * CCER CC4P LL_TIM_IC_SetPolarity\n - * CCER CC4NP LL_TIM_IC_SetPolarity - * @param TIMx Timer instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH4 - * @param ICPolarity This parameter can be one of the following values: - * @arg @ref LL_TIM_IC_POLARITY_RISING - * @arg @ref LL_TIM_IC_POLARITY_FALLING - * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE - * @retval None - */ -__STATIC_INLINE void LL_TIM_IC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPolarity) -{ - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]), - ICPolarity << SHIFT_TAB_CCxP[iChannel]); -} - -/** - * @brief Get the current input channel polarity. - * @rmtoll CCER CC1P LL_TIM_IC_GetPolarity\n - * CCER CC1NP LL_TIM_IC_GetPolarity\n - * CCER CC2P LL_TIM_IC_GetPolarity\n - * CCER CC2NP LL_TIM_IC_GetPolarity\n - * CCER CC3P LL_TIM_IC_GetPolarity\n - * CCER CC3NP LL_TIM_IC_GetPolarity\n - * CCER CC4P LL_TIM_IC_GetPolarity\n - * CCER CC4NP LL_TIM_IC_GetPolarity - * @param TIMx Timer instance - * @param Channel This parameter can be one of the following values: - * @arg @ref LL_TIM_CHANNEL_CH1 - * @arg @ref LL_TIM_CHANNEL_CH2 - * @arg @ref LL_TIM_CHANNEL_CH3 - * @arg @ref LL_TIM_CHANNEL_CH4 - * @retval Returned value can be one of the following values: - * @arg @ref LL_TIM_IC_POLARITY_RISING - * @arg @ref LL_TIM_IC_POLARITY_FALLING - * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE - */ -__STATIC_INLINE uint32_t LL_TIM_IC_GetPolarity(TIM_TypeDef *TIMx, uint32_t Channel) -{ - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - return (READ_BIT(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel])) >> - SHIFT_TAB_CCxP[iChannel]); -} - -/** - * @brief Connect the TIMx_CH1, CH2 and CH3 pins to the TI1 input (XOR combination). - * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not - * a timer instance provides an XOR input. - * @rmtoll CR2 TI1S LL_TIM_IC_EnableXORCombination - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_IC_EnableXORCombination(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->CR2, TIM_CR2_TI1S); -} - -/** - * @brief Disconnect the TIMx_CH1, CH2 and CH3 pins from the TI1 input. - * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not - * a timer instance provides an XOR input. - * @rmtoll CR2 TI1S LL_TIM_IC_DisableXORCombination - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_IC_DisableXORCombination(TIM_TypeDef *TIMx) -{ - CLEAR_BIT(TIMx->CR2, TIM_CR2_TI1S); -} - -/** - * @brief Indicates whether the TIMx_CH1, CH2 and CH3 pins are connectected to the TI1 input. - * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not - * a timer instance provides an XOR input. - * @rmtoll CR2 TI1S LL_TIM_IC_IsEnabledXORCombination - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IC_IsEnabledXORCombination(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->CR2, TIM_CR2_TI1S) == (TIM_CR2_TI1S)) ? 1UL : 0UL); -} - -/** - * @brief Get captured value for input channel 1. - * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. - * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not - * input channel 1 is supported by a timer instance. - * @rmtoll CCR1 CCR1 LL_TIM_IC_GetCaptureCH1 - * @param TIMx Timer instance - * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) - */ -__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH1(TIM_TypeDef *TIMx) -{ - return (uint32_t)(READ_REG(TIMx->CCR1)); -} - -/** - * @brief Get captured value for input channel 2. - * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. - * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not - * input channel 2 is supported by a timer instance. - * @rmtoll CCR2 CCR2 LL_TIM_IC_GetCaptureCH2 - * @param TIMx Timer instance - * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) - */ -__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH2(TIM_TypeDef *TIMx) -{ - return (uint32_t)(READ_REG(TIMx->CCR2)); -} - -/** - * @brief Get captured value for input channel 3. - * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. - * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not - * input channel 3 is supported by a timer instance. - * @rmtoll CCR3 CCR3 LL_TIM_IC_GetCaptureCH3 - * @param TIMx Timer instance - * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) - */ -__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH3(TIM_TypeDef *TIMx) -{ - return (uint32_t)(READ_REG(TIMx->CCR3)); -} - -/** - * @brief Get captured value for input channel 4. - * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports a 32 bits counter. - * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not - * input channel 4 is supported by a timer instance. - * @rmtoll CCR4 CCR4 LL_TIM_IC_GetCaptureCH4 - * @param TIMx Timer instance - * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) - */ -__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH4(TIM_TypeDef *TIMx) -{ - return (uint32_t)(READ_REG(TIMx->CCR4)); -} - -/** - * @} - */ - -/** @defgroup TIM_LL_EF_Clock_Selection Counter clock selection - * @{ - */ -/** - * @brief Enable external clock mode 2. - * @note When external clock mode 2 is enabled the counter is clocked by any active edge on the ETRF signal. - * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports external clock mode2. - * @rmtoll SMCR ECE LL_TIM_EnableExternalClock - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_EnableExternalClock(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->SMCR, TIM_SMCR_ECE); -} - -/** - * @brief Disable external clock mode 2. - * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports external clock mode2. - * @rmtoll SMCR ECE LL_TIM_DisableExternalClock - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_DisableExternalClock(TIM_TypeDef *TIMx) -{ - CLEAR_BIT(TIMx->SMCR, TIM_SMCR_ECE); -} - -/** - * @brief Indicate whether external clock mode 2 is enabled. - * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports external clock mode2. - * @rmtoll SMCR ECE LL_TIM_IsEnabledExternalClock - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsEnabledExternalClock(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->SMCR, TIM_SMCR_ECE) == (TIM_SMCR_ECE)) ? 1UL : 0UL); -} - -/** - * @brief Set the clock source of the counter clock. - * @note when selected clock source is external clock mode 1, the timer input - * the external clock is applied is selected by calling the @ref LL_TIM_SetTriggerInput() - * function. This timer input must be configured by calling - * the @ref LL_TIM_IC_Config() function. - * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports external clock mode1. - * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports external clock mode2. - * @rmtoll SMCR SMS LL_TIM_SetClockSource\n - * SMCR ECE LL_TIM_SetClockSource - * @param TIMx Timer instance - * @param ClockSource This parameter can be one of the following values: - * @arg @ref LL_TIM_CLOCKSOURCE_INTERNAL - * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE1 - * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE2 - * @retval None - */ -__STATIC_INLINE void LL_TIM_SetClockSource(TIM_TypeDef *TIMx, uint32_t ClockSource) -{ - MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS | TIM_SMCR_ECE, ClockSource); -} - -/** - * @brief Set the encoder interface mode. - * @note Macro IS_TIM_ENCODER_INTERFACE_INSTANCE(TIMx) can be used to check - * whether or not a timer instance supports the encoder mode. - * @rmtoll SMCR SMS LL_TIM_SetEncoderMode - * @param TIMx Timer instance - * @param EncoderMode This parameter can be one of the following values: - * @arg @ref LL_TIM_ENCODERMODE_X2_TI1 - * @arg @ref LL_TIM_ENCODERMODE_X2_TI2 - * @arg @ref LL_TIM_ENCODERMODE_X4_TI12 - * @retval None - */ -__STATIC_INLINE void LL_TIM_SetEncoderMode(TIM_TypeDef *TIMx, uint32_t EncoderMode) -{ - MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, EncoderMode); -} - -/** - * @} - */ - -/** @defgroup TIM_LL_EF_Timer_Synchronization Timer synchronisation configuration - * @{ - */ -/** - * @brief Set the trigger output (TRGO) used for timer synchronization . - * @note Macro IS_TIM_MASTER_INSTANCE(TIMx) can be used to check - * whether or not a timer instance can operate as a master timer. - * @rmtoll CR2 MMS LL_TIM_SetTriggerOutput - * @param TIMx Timer instance - * @param TimerSynchronization This parameter can be one of the following values: - * @arg @ref LL_TIM_TRGO_RESET - * @arg @ref LL_TIM_TRGO_ENABLE - * @arg @ref LL_TIM_TRGO_UPDATE - * @arg @ref LL_TIM_TRGO_CC1IF - * @arg @ref LL_TIM_TRGO_OC1REF - * @arg @ref LL_TIM_TRGO_OC2REF - * @arg @ref LL_TIM_TRGO_OC3REF - * @arg @ref LL_TIM_TRGO_OC4REF - * @retval None - */ -__STATIC_INLINE void LL_TIM_SetTriggerOutput(TIM_TypeDef *TIMx, uint32_t TimerSynchronization) -{ - MODIFY_REG(TIMx->CR2, TIM_CR2_MMS, TimerSynchronization); -} - -/** - * @brief Set the synchronization mode of a slave timer. - * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not - * a timer instance can operate as a slave timer. - * @rmtoll SMCR SMS LL_TIM_SetSlaveMode - * @param TIMx Timer instance - * @param SlaveMode This parameter can be one of the following values: - * @arg @ref LL_TIM_SLAVEMODE_DISABLED - * @arg @ref LL_TIM_SLAVEMODE_RESET - * @arg @ref LL_TIM_SLAVEMODE_GATED - * @arg @ref LL_TIM_SLAVEMODE_TRIGGER - * @retval None - */ -__STATIC_INLINE void LL_TIM_SetSlaveMode(TIM_TypeDef *TIMx, uint32_t SlaveMode) -{ - MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, SlaveMode); -} - -/** - * @brief Set the selects the trigger input to be used to synchronize the counter. - * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not - * a timer instance can operate as a slave timer. - * @rmtoll SMCR TS LL_TIM_SetTriggerInput - * @param TIMx Timer instance - * @param TriggerInput This parameter can be one of the following values: - * @arg @ref LL_TIM_TS_ITR0 - * @arg @ref LL_TIM_TS_ITR1 - * @arg @ref LL_TIM_TS_ITR2 - * @arg @ref LL_TIM_TS_ITR3 - * @arg @ref LL_TIM_TS_TI1F_ED - * @arg @ref LL_TIM_TS_TI1FP1 - * @arg @ref LL_TIM_TS_TI2FP2 - * @arg @ref LL_TIM_TS_ETRF - * @retval None - */ -__STATIC_INLINE void LL_TIM_SetTriggerInput(TIM_TypeDef *TIMx, uint32_t TriggerInput) -{ - MODIFY_REG(TIMx->SMCR, TIM_SMCR_TS, TriggerInput); -} - -/** - * @brief Enable the Master/Slave mode. - * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not - * a timer instance can operate as a slave timer. - * @rmtoll SMCR MSM LL_TIM_EnableMasterSlaveMode - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_EnableMasterSlaveMode(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->SMCR, TIM_SMCR_MSM); -} - -/** - * @brief Disable the Master/Slave mode. - * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not - * a timer instance can operate as a slave timer. - * @rmtoll SMCR MSM LL_TIM_DisableMasterSlaveMode - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_DisableMasterSlaveMode(TIM_TypeDef *TIMx) -{ - CLEAR_BIT(TIMx->SMCR, TIM_SMCR_MSM); -} - -/** - * @brief Indicates whether the Master/Slave mode is enabled. - * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not - * a timer instance can operate as a slave timer. - * @rmtoll SMCR MSM LL_TIM_IsEnabledMasterSlaveMode - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsEnabledMasterSlaveMode(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->SMCR, TIM_SMCR_MSM) == (TIM_SMCR_MSM)) ? 1UL : 0UL); -} - -/** - * @brief Configure the external trigger (ETR) input. - * @note Macro IS_TIM_ETR_INSTANCE(TIMx) can be used to check whether or not - * a timer instance provides an external trigger input. - * @rmtoll SMCR ETP LL_TIM_ConfigETR\n - * SMCR ETPS LL_TIM_ConfigETR\n - * SMCR ETF LL_TIM_ConfigETR - * @param TIMx Timer instance - * @param ETRPolarity This parameter can be one of the following values: - * @arg @ref LL_TIM_ETR_POLARITY_NONINVERTED - * @arg @ref LL_TIM_ETR_POLARITY_INVERTED - * @param ETRPrescaler This parameter can be one of the following values: - * @arg @ref LL_TIM_ETR_PRESCALER_DIV1 - * @arg @ref LL_TIM_ETR_PRESCALER_DIV2 - * @arg @ref LL_TIM_ETR_PRESCALER_DIV4 - * @arg @ref LL_TIM_ETR_PRESCALER_DIV8 - * @param ETRFilter This parameter can be one of the following values: - * @arg @ref LL_TIM_ETR_FILTER_FDIV1 - * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N2 - * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N4 - * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N8 - * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N6 - * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N8 - * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N6 - * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N8 - * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N6 - * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N8 - * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N5 - * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N6 - * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N8 - * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N5 - * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N6 - * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N8 - * @retval None - */ -__STATIC_INLINE void LL_TIM_ConfigETR(TIM_TypeDef *TIMx, uint32_t ETRPolarity, uint32_t ETRPrescaler, - uint32_t ETRFilter) -{ - MODIFY_REG(TIMx->SMCR, TIM_SMCR_ETP | TIM_SMCR_ETPS | TIM_SMCR_ETF, ETRPolarity | ETRPrescaler | ETRFilter); -} - -/** - * @} - */ - -/** @defgroup TIM_LL_EF_Break_Function Break function configuration - * @{ - */ -/** - * @brief Enable the break function. - * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not - * a timer instance provides a break input. - * @rmtoll BDTR BKE LL_TIM_EnableBRK - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_EnableBRK(TIM_TypeDef *TIMx) -{ - __IO uint32_t tmpreg; - SET_BIT(TIMx->BDTR, TIM_BDTR_BKE); - /* Note: Any write operation to this bit takes a delay of 1 APB clock cycle to become effective. */ - tmpreg = READ_REG(TIMx->BDTR); - (void)(tmpreg); -} - -/** - * @brief Disable the break function. - * @rmtoll BDTR BKE LL_TIM_DisableBRK - * @param TIMx Timer instance - * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not - * a timer instance provides a break input. - * @retval None - */ -__STATIC_INLINE void LL_TIM_DisableBRK(TIM_TypeDef *TIMx) -{ - __IO uint32_t tmpreg; - CLEAR_BIT(TIMx->BDTR, TIM_BDTR_BKE); - /* Note: Any write operation to this bit takes a delay of 1 APB clock cycle to become effective. */ - tmpreg = READ_REG(TIMx->BDTR); - (void)(tmpreg); -} - -/** - * @brief Configure the break input. - * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not - * a timer instance provides a break input. - * @rmtoll BDTR BKP LL_TIM_ConfigBRK - * @param TIMx Timer instance - * @param BreakPolarity This parameter can be one of the following values: - * @arg @ref LL_TIM_BREAK_POLARITY_LOW - * @arg @ref LL_TIM_BREAK_POLARITY_HIGH - * @retval None - */ -__STATIC_INLINE void LL_TIM_ConfigBRK(TIM_TypeDef *TIMx, uint32_t BreakPolarity) -{ - __IO uint32_t tmpreg; - MODIFY_REG(TIMx->BDTR, TIM_BDTR_BKP, BreakPolarity); - /* Note: Any write operation to BKP bit takes a delay of 1 APB clock cycle to become effective. */ - tmpreg = READ_REG(TIMx->BDTR); - (void)(tmpreg); -} - -/** - * @brief Select the outputs off state (enabled v.s. disabled) in Idle and Run modes. - * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not - * a timer instance provides a break input. - * @rmtoll BDTR OSSI LL_TIM_SetOffStates\n - * BDTR OSSR LL_TIM_SetOffStates - * @param TIMx Timer instance - * @param OffStateIdle This parameter can be one of the following values: - * @arg @ref LL_TIM_OSSI_DISABLE - * @arg @ref LL_TIM_OSSI_ENABLE - * @param OffStateRun This parameter can be one of the following values: - * @arg @ref LL_TIM_OSSR_DISABLE - * @arg @ref LL_TIM_OSSR_ENABLE - * @retval None - */ -__STATIC_INLINE void LL_TIM_SetOffStates(TIM_TypeDef *TIMx, uint32_t OffStateIdle, uint32_t OffStateRun) -{ - MODIFY_REG(TIMx->BDTR, TIM_BDTR_OSSI | TIM_BDTR_OSSR, OffStateIdle | OffStateRun); -} - -/** - * @brief Enable automatic output (MOE can be set by software or automatically when a break input is active). - * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not - * a timer instance provides a break input. - * @rmtoll BDTR AOE LL_TIM_EnableAutomaticOutput - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_EnableAutomaticOutput(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->BDTR, TIM_BDTR_AOE); -} - -/** - * @brief Disable automatic output (MOE can be set only by software). - * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not - * a timer instance provides a break input. - * @rmtoll BDTR AOE LL_TIM_DisableAutomaticOutput - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_DisableAutomaticOutput(TIM_TypeDef *TIMx) -{ - CLEAR_BIT(TIMx->BDTR, TIM_BDTR_AOE); -} - -/** - * @brief Indicate whether automatic output is enabled. - * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not - * a timer instance provides a break input. - * @rmtoll BDTR AOE LL_TIM_IsEnabledAutomaticOutput - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsEnabledAutomaticOutput(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->BDTR, TIM_BDTR_AOE) == (TIM_BDTR_AOE)) ? 1UL : 0UL); -} - -/** - * @brief Enable the outputs (set the MOE bit in TIMx_BDTR register). - * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by - * software and is reset in case of break or break2 event - * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not - * a timer instance provides a break input. - * @rmtoll BDTR MOE LL_TIM_EnableAllOutputs - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_EnableAllOutputs(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->BDTR, TIM_BDTR_MOE); -} - -/** - * @brief Disable the outputs (reset the MOE bit in TIMx_BDTR register). - * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by - * software and is reset in case of break or break2 event. - * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not - * a timer instance provides a break input. - * @rmtoll BDTR MOE LL_TIM_DisableAllOutputs - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_DisableAllOutputs(TIM_TypeDef *TIMx) -{ - CLEAR_BIT(TIMx->BDTR, TIM_BDTR_MOE); -} - -/** - * @brief Indicates whether outputs are enabled. - * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not - * a timer instance provides a break input. - * @rmtoll BDTR MOE LL_TIM_IsEnabledAllOutputs - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsEnabledAllOutputs(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->BDTR, TIM_BDTR_MOE) == (TIM_BDTR_MOE)) ? 1UL : 0UL); -} - -/** - * @} - */ - -/** @defgroup TIM_LL_EF_DMA_Burst_Mode DMA burst mode configuration - * @{ - */ -/** - * @brief Configures the timer DMA burst feature. - * @note Macro IS_TIM_DMABURST_INSTANCE(TIMx) can be used to check whether or - * not a timer instance supports the DMA burst mode. - * @rmtoll DCR DBL LL_TIM_ConfigDMABurst\n - * DCR DBA LL_TIM_ConfigDMABurst - * @param TIMx Timer instance - * @param DMABurstBaseAddress This parameter can be one of the following values: - * @arg @ref LL_TIM_DMABURST_BASEADDR_CR1 - * @arg @ref LL_TIM_DMABURST_BASEADDR_CR2 - * @arg @ref LL_TIM_DMABURST_BASEADDR_SMCR - * @arg @ref LL_TIM_DMABURST_BASEADDR_DIER - * @arg @ref LL_TIM_DMABURST_BASEADDR_SR - * @arg @ref LL_TIM_DMABURST_BASEADDR_EGR - * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR1 - * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR2 - * @arg @ref LL_TIM_DMABURST_BASEADDR_CCER - * @arg @ref LL_TIM_DMABURST_BASEADDR_CNT - * @arg @ref LL_TIM_DMABURST_BASEADDR_PSC - * @arg @ref LL_TIM_DMABURST_BASEADDR_ARR - * @arg @ref LL_TIM_DMABURST_BASEADDR_RCR - * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR1 - * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR2 - * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR3 - * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR4 - * @arg @ref LL_TIM_DMABURST_BASEADDR_BDTR - * @param DMABurstLength This parameter can be one of the following values: - * @arg @ref LL_TIM_DMABURST_LENGTH_1TRANSFER - * @arg @ref LL_TIM_DMABURST_LENGTH_2TRANSFERS - * @arg @ref LL_TIM_DMABURST_LENGTH_3TRANSFERS - * @arg @ref LL_TIM_DMABURST_LENGTH_4TRANSFERS - * @arg @ref LL_TIM_DMABURST_LENGTH_5TRANSFERS - * @arg @ref LL_TIM_DMABURST_LENGTH_6TRANSFERS - * @arg @ref LL_TIM_DMABURST_LENGTH_7TRANSFERS - * @arg @ref LL_TIM_DMABURST_LENGTH_8TRANSFERS - * @arg @ref LL_TIM_DMABURST_LENGTH_9TRANSFERS - * @arg @ref LL_TIM_DMABURST_LENGTH_10TRANSFERS - * @arg @ref LL_TIM_DMABURST_LENGTH_11TRANSFERS - * @arg @ref LL_TIM_DMABURST_LENGTH_12TRANSFERS - * @arg @ref LL_TIM_DMABURST_LENGTH_13TRANSFERS - * @arg @ref LL_TIM_DMABURST_LENGTH_14TRANSFERS - * @arg @ref LL_TIM_DMABURST_LENGTH_15TRANSFERS - * @arg @ref LL_TIM_DMABURST_LENGTH_16TRANSFERS - * @arg @ref LL_TIM_DMABURST_LENGTH_17TRANSFERS - * @arg @ref LL_TIM_DMABURST_LENGTH_18TRANSFERS - * @retval None - */ -__STATIC_INLINE void LL_TIM_ConfigDMABurst(TIM_TypeDef *TIMx, uint32_t DMABurstBaseAddress, uint32_t DMABurstLength) -{ - MODIFY_REG(TIMx->DCR, (TIM_DCR_DBL | TIM_DCR_DBA), (DMABurstBaseAddress | DMABurstLength)); -} - -/** - * @} - */ - -/** @defgroup TIM_LL_EF_Timer_Inputs_Remapping Timer input remapping - * @{ - */ -/** - * @brief Remap TIM inputs (input channel, internal/external triggers). - * @note Macro IS_TIM_REMAP_INSTANCE(TIMx) can be used to check whether or not - * a some timer inputs can be remapped. - * @rmtoll TIM1_OR ITR2_RMP LL_TIM_SetRemap\n - * TIM2_OR ITR1_RMP LL_TIM_SetRemap\n - * TIM5_OR ITR1_RMP LL_TIM_SetRemap\n - * TIM5_OR TI4_RMP LL_TIM_SetRemap\n - * TIM9_OR ITR1_RMP LL_TIM_SetRemap\n - * TIM11_OR TI1_RMP LL_TIM_SetRemap\n - * LPTIM1_OR OR LL_TIM_SetRemap - * @param TIMx Timer instance - * @param Remap Remap param depends on the TIMx. Description available only - * in CHM version of the User Manual (not in .pdf). - * Otherwise see Reference Manual description of OR registers. - * - * Below description summarizes "Timer Instance" and "Remap" param combinations: - * - * TIM1: one of the following values - * - * ITR2_RMP can be one of the following values - * @arg @ref LL_TIM_TIM1_ITR2_RMP_TIM3_TRGO (*) - * @arg @ref LL_TIM_TIM1_ITR2_RMP_LPTIM (*) - * - * TIM2: one of the following values - * - * ITR1_RMP can be one of the following values - * @arg @ref LL_TIM_TIM2_ITR1_RMP_TIM8_TRGO - * @arg @ref LL_TIM_TIM2_ITR1_RMP_OTG_FS_SOF - * @arg @ref LL_TIM_TIM2_ITR1_RMP_OTG_HS_SOF - * - * TIM5: one of the following values - * - * @arg @ref LL_TIM_TIM5_TI4_RMP_GPIO - * @arg @ref LL_TIM_TIM5_TI4_RMP_LSI - * @arg @ref LL_TIM_TIM5_TI4_RMP_LSE - * @arg @ref LL_TIM_TIM5_TI4_RMP_RTC - * @arg @ref LL_TIM_TIM5_ITR1_RMP_TIM3_TRGO (*) - * @arg @ref LL_TIM_TIM5_ITR1_RMP_LPTIM (*) - * - * TIM9: one of the following values - * - * ITR1_RMP can be one of the following values - * @arg @ref LL_TIM_TIM9_ITR1_RMP_TIM3_TRGO (*) - * @arg @ref LL_TIM_TIM9_ITR1_RMP_LPTIM (*) - * - * TIM11: one of the following values - * - * @arg @ref LL_TIM_TIM11_TI1_RMP_GPIO - * @arg @ref LL_TIM_TIM11_TI1_RMP_GPIO1 (*) - * @arg @ref LL_TIM_TIM11_TI1_RMP_HSE_RTC - * @arg @ref LL_TIM_TIM11_TI1_RMP_GPIO2 - * @arg @ref LL_TIM_TIM11_TI1_RMP_SPDIFRX (*) - * - * (*) Value not defined in all devices. \n - * - * @retval None - */ -__STATIC_INLINE void LL_TIM_SetRemap(TIM_TypeDef *TIMx, uint32_t Remap) -{ -#if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM9_ITR1_RMP) - if ((Remap & LL_TIM_LPTIM_REMAP_MASK) == LL_TIM_LPTIM_REMAP_MASK) - { - /* Connect TIMx internal trigger to LPTIM1 output */ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN); - MODIFY_REG(LPTIM1->OR, - (LPTIM_OR_TIM1_ITR2_RMP | LPTIM_OR_TIM5_ITR1_RMP | LPTIM_OR_TIM9_ITR1_RMP), - Remap & ~(LL_TIM_LPTIM_REMAP_MASK)); - } - else - { - MODIFY_REG(TIMx->OR, (Remap >> TIMx_OR_RMP_SHIFT), (Remap & TIMx_OR_RMP_MASK)); - } -#else - MODIFY_REG(TIMx->OR, (Remap >> TIMx_OR_RMP_SHIFT), (Remap & TIMx_OR_RMP_MASK)); -#endif /* LPTIM_OR_TIM1_ITR2_RMP && LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM9_ITR1_RMP */ -} - -/** - * @} - */ - -/** @defgroup TIM_LL_EF_FLAG_Management FLAG-Management - * @{ - */ -/** - * @brief Clear the update interrupt flag (UIF). - * @rmtoll SR UIF LL_TIM_ClearFlag_UPDATE - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_ClearFlag_UPDATE(TIM_TypeDef *TIMx) -{ - WRITE_REG(TIMx->SR, ~(TIM_SR_UIF)); -} - -/** - * @brief Indicate whether update interrupt flag (UIF) is set (update interrupt is pending). - * @rmtoll SR UIF LL_TIM_IsActiveFlag_UPDATE - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_UPDATE(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->SR, TIM_SR_UIF) == (TIM_SR_UIF)) ? 1UL : 0UL); -} - -/** - * @brief Clear the Capture/Compare 1 interrupt flag (CC1F). - * @rmtoll SR CC1IF LL_TIM_ClearFlag_CC1 - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_ClearFlag_CC1(TIM_TypeDef *TIMx) -{ - WRITE_REG(TIMx->SR, ~(TIM_SR_CC1IF)); -} - -/** - * @brief Indicate whether Capture/Compare 1 interrupt flag (CC1F) is set (Capture/Compare 1 interrupt is pending). - * @rmtoll SR CC1IF LL_TIM_IsActiveFlag_CC1 - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->SR, TIM_SR_CC1IF) == (TIM_SR_CC1IF)) ? 1UL : 0UL); -} - -/** - * @brief Clear the Capture/Compare 2 interrupt flag (CC2F). - * @rmtoll SR CC2IF LL_TIM_ClearFlag_CC2 - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_ClearFlag_CC2(TIM_TypeDef *TIMx) -{ - WRITE_REG(TIMx->SR, ~(TIM_SR_CC2IF)); -} - -/** - * @brief Indicate whether Capture/Compare 2 interrupt flag (CC2F) is set (Capture/Compare 2 interrupt is pending). - * @rmtoll SR CC2IF LL_TIM_IsActiveFlag_CC2 - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->SR, TIM_SR_CC2IF) == (TIM_SR_CC2IF)) ? 1UL : 0UL); -} - -/** - * @brief Clear the Capture/Compare 3 interrupt flag (CC3F). - * @rmtoll SR CC3IF LL_TIM_ClearFlag_CC3 - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_ClearFlag_CC3(TIM_TypeDef *TIMx) -{ - WRITE_REG(TIMx->SR, ~(TIM_SR_CC3IF)); -} - -/** - * @brief Indicate whether Capture/Compare 3 interrupt flag (CC3F) is set (Capture/Compare 3 interrupt is pending). - * @rmtoll SR CC3IF LL_TIM_IsActiveFlag_CC3 - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->SR, TIM_SR_CC3IF) == (TIM_SR_CC3IF)) ? 1UL : 0UL); -} - -/** - * @brief Clear the Capture/Compare 4 interrupt flag (CC4F). - * @rmtoll SR CC4IF LL_TIM_ClearFlag_CC4 - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_ClearFlag_CC4(TIM_TypeDef *TIMx) -{ - WRITE_REG(TIMx->SR, ~(TIM_SR_CC4IF)); -} - -/** - * @brief Indicate whether Capture/Compare 4 interrupt flag (CC4F) is set (Capture/Compare 4 interrupt is pending). - * @rmtoll SR CC4IF LL_TIM_IsActiveFlag_CC4 - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->SR, TIM_SR_CC4IF) == (TIM_SR_CC4IF)) ? 1UL : 0UL); -} - -/** - * @brief Clear the commutation interrupt flag (COMIF). - * @rmtoll SR COMIF LL_TIM_ClearFlag_COM - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_ClearFlag_COM(TIM_TypeDef *TIMx) -{ - WRITE_REG(TIMx->SR, ~(TIM_SR_COMIF)); -} - -/** - * @brief Indicate whether commutation interrupt flag (COMIF) is set (commutation interrupt is pending). - * @rmtoll SR COMIF LL_TIM_IsActiveFlag_COM - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_COM(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->SR, TIM_SR_COMIF) == (TIM_SR_COMIF)) ? 1UL : 0UL); -} - -/** - * @brief Clear the trigger interrupt flag (TIF). - * @rmtoll SR TIF LL_TIM_ClearFlag_TRIG - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_ClearFlag_TRIG(TIM_TypeDef *TIMx) -{ - WRITE_REG(TIMx->SR, ~(TIM_SR_TIF)); -} - -/** - * @brief Indicate whether trigger interrupt flag (TIF) is set (trigger interrupt is pending). - * @rmtoll SR TIF LL_TIM_IsActiveFlag_TRIG - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_TRIG(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->SR, TIM_SR_TIF) == (TIM_SR_TIF)) ? 1UL : 0UL); -} - -/** - * @brief Clear the break interrupt flag (BIF). - * @rmtoll SR BIF LL_TIM_ClearFlag_BRK - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_ClearFlag_BRK(TIM_TypeDef *TIMx) -{ - WRITE_REG(TIMx->SR, ~(TIM_SR_BIF)); -} - -/** - * @brief Indicate whether break interrupt flag (BIF) is set (break interrupt is pending). - * @rmtoll SR BIF LL_TIM_IsActiveFlag_BRK - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_BRK(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->SR, TIM_SR_BIF) == (TIM_SR_BIF)) ? 1UL : 0UL); -} - -/** - * @brief Clear the Capture/Compare 1 over-capture interrupt flag (CC1OF). - * @rmtoll SR CC1OF LL_TIM_ClearFlag_CC1OVR - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_ClearFlag_CC1OVR(TIM_TypeDef *TIMx) -{ - WRITE_REG(TIMx->SR, ~(TIM_SR_CC1OF)); -} - -/** - * @brief Indicate whether Capture/Compare 1 over-capture interrupt flag (CC1OF) is set - * (Capture/Compare 1 interrupt is pending). - * @rmtoll SR CC1OF LL_TIM_IsActiveFlag_CC1OVR - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1OVR(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->SR, TIM_SR_CC1OF) == (TIM_SR_CC1OF)) ? 1UL : 0UL); -} - -/** - * @brief Clear the Capture/Compare 2 over-capture interrupt flag (CC2OF). - * @rmtoll SR CC2OF LL_TIM_ClearFlag_CC2OVR - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_ClearFlag_CC2OVR(TIM_TypeDef *TIMx) -{ - WRITE_REG(TIMx->SR, ~(TIM_SR_CC2OF)); -} - -/** - * @brief Indicate whether Capture/Compare 2 over-capture interrupt flag (CC2OF) is set - * (Capture/Compare 2 over-capture interrupt is pending). - * @rmtoll SR CC2OF LL_TIM_IsActiveFlag_CC2OVR - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2OVR(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->SR, TIM_SR_CC2OF) == (TIM_SR_CC2OF)) ? 1UL : 0UL); -} - -/** - * @brief Clear the Capture/Compare 3 over-capture interrupt flag (CC3OF). - * @rmtoll SR CC3OF LL_TIM_ClearFlag_CC3OVR - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_ClearFlag_CC3OVR(TIM_TypeDef *TIMx) -{ - WRITE_REG(TIMx->SR, ~(TIM_SR_CC3OF)); -} - -/** - * @brief Indicate whether Capture/Compare 3 over-capture interrupt flag (CC3OF) is set - * (Capture/Compare 3 over-capture interrupt is pending). - * @rmtoll SR CC3OF LL_TIM_IsActiveFlag_CC3OVR - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3OVR(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->SR, TIM_SR_CC3OF) == (TIM_SR_CC3OF)) ? 1UL : 0UL); -} - -/** - * @brief Clear the Capture/Compare 4 over-capture interrupt flag (CC4OF). - * @rmtoll SR CC4OF LL_TIM_ClearFlag_CC4OVR - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_ClearFlag_CC4OVR(TIM_TypeDef *TIMx) -{ - WRITE_REG(TIMx->SR, ~(TIM_SR_CC4OF)); -} - -/** - * @brief Indicate whether Capture/Compare 4 over-capture interrupt flag (CC4OF) is set - * (Capture/Compare 4 over-capture interrupt is pending). - * @rmtoll SR CC4OF LL_TIM_IsActiveFlag_CC4OVR - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4OVR(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->SR, TIM_SR_CC4OF) == (TIM_SR_CC4OF)) ? 1UL : 0UL); -} - -/** - * @} - */ - -/** @defgroup TIM_LL_EF_IT_Management IT-Management - * @{ - */ -/** - * @brief Enable update interrupt (UIE). - * @rmtoll DIER UIE LL_TIM_EnableIT_UPDATE - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_EnableIT_UPDATE(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->DIER, TIM_DIER_UIE); -} - -/** - * @brief Disable update interrupt (UIE). - * @rmtoll DIER UIE LL_TIM_DisableIT_UPDATE - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_DisableIT_UPDATE(TIM_TypeDef *TIMx) -{ - CLEAR_BIT(TIMx->DIER, TIM_DIER_UIE); -} - -/** - * @brief Indicates whether the update interrupt (UIE) is enabled. - * @rmtoll DIER UIE LL_TIM_IsEnabledIT_UPDATE - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_UPDATE(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->DIER, TIM_DIER_UIE) == (TIM_DIER_UIE)) ? 1UL : 0UL); -} - -/** - * @brief Enable capture/compare 1 interrupt (CC1IE). - * @rmtoll DIER CC1IE LL_TIM_EnableIT_CC1 - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_EnableIT_CC1(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->DIER, TIM_DIER_CC1IE); -} - -/** - * @brief Disable capture/compare 1 interrupt (CC1IE). - * @rmtoll DIER CC1IE LL_TIM_DisableIT_CC1 - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_DisableIT_CC1(TIM_TypeDef *TIMx) -{ - CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1IE); -} - -/** - * @brief Indicates whether the capture/compare 1 interrupt (CC1IE) is enabled. - * @rmtoll DIER CC1IE LL_TIM_IsEnabledIT_CC1 - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC1(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->DIER, TIM_DIER_CC1IE) == (TIM_DIER_CC1IE)) ? 1UL : 0UL); -} - -/** - * @brief Enable capture/compare 2 interrupt (CC2IE). - * @rmtoll DIER CC2IE LL_TIM_EnableIT_CC2 - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_EnableIT_CC2(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->DIER, TIM_DIER_CC2IE); -} - -/** - * @brief Disable capture/compare 2 interrupt (CC2IE). - * @rmtoll DIER CC2IE LL_TIM_DisableIT_CC2 - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_DisableIT_CC2(TIM_TypeDef *TIMx) -{ - CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2IE); -} - -/** - * @brief Indicates whether the capture/compare 2 interrupt (CC2IE) is enabled. - * @rmtoll DIER CC2IE LL_TIM_IsEnabledIT_CC2 - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC2(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->DIER, TIM_DIER_CC2IE) == (TIM_DIER_CC2IE)) ? 1UL : 0UL); -} - -/** - * @brief Enable capture/compare 3 interrupt (CC3IE). - * @rmtoll DIER CC3IE LL_TIM_EnableIT_CC3 - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_EnableIT_CC3(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->DIER, TIM_DIER_CC3IE); -} - -/** - * @brief Disable capture/compare 3 interrupt (CC3IE). - * @rmtoll DIER CC3IE LL_TIM_DisableIT_CC3 - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_DisableIT_CC3(TIM_TypeDef *TIMx) -{ - CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3IE); -} - -/** - * @brief Indicates whether the capture/compare 3 interrupt (CC3IE) is enabled. - * @rmtoll DIER CC3IE LL_TIM_IsEnabledIT_CC3 - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC3(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->DIER, TIM_DIER_CC3IE) == (TIM_DIER_CC3IE)) ? 1UL : 0UL); -} - -/** - * @brief Enable capture/compare 4 interrupt (CC4IE). - * @rmtoll DIER CC4IE LL_TIM_EnableIT_CC4 - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_EnableIT_CC4(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->DIER, TIM_DIER_CC4IE); -} - -/** - * @brief Disable capture/compare 4 interrupt (CC4IE). - * @rmtoll DIER CC4IE LL_TIM_DisableIT_CC4 - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_DisableIT_CC4(TIM_TypeDef *TIMx) -{ - CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4IE); -} - -/** - * @brief Indicates whether the capture/compare 4 interrupt (CC4IE) is enabled. - * @rmtoll DIER CC4IE LL_TIM_IsEnabledIT_CC4 - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC4(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->DIER, TIM_DIER_CC4IE) == (TIM_DIER_CC4IE)) ? 1UL : 0UL); -} - -/** - * @brief Enable commutation interrupt (COMIE). - * @rmtoll DIER COMIE LL_TIM_EnableIT_COM - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_EnableIT_COM(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->DIER, TIM_DIER_COMIE); -} - -/** - * @brief Disable commutation interrupt (COMIE). - * @rmtoll DIER COMIE LL_TIM_DisableIT_COM - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_DisableIT_COM(TIM_TypeDef *TIMx) -{ - CLEAR_BIT(TIMx->DIER, TIM_DIER_COMIE); -} - -/** - * @brief Indicates whether the commutation interrupt (COMIE) is enabled. - * @rmtoll DIER COMIE LL_TIM_IsEnabledIT_COM - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_COM(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->DIER, TIM_DIER_COMIE) == (TIM_DIER_COMIE)) ? 1UL : 0UL); -} - -/** - * @brief Enable trigger interrupt (TIE). - * @rmtoll DIER TIE LL_TIM_EnableIT_TRIG - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_EnableIT_TRIG(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->DIER, TIM_DIER_TIE); -} - -/** - * @brief Disable trigger interrupt (TIE). - * @rmtoll DIER TIE LL_TIM_DisableIT_TRIG - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_DisableIT_TRIG(TIM_TypeDef *TIMx) -{ - CLEAR_BIT(TIMx->DIER, TIM_DIER_TIE); -} - -/** - * @brief Indicates whether the trigger interrupt (TIE) is enabled. - * @rmtoll DIER TIE LL_TIM_IsEnabledIT_TRIG - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_TRIG(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->DIER, TIM_DIER_TIE) == (TIM_DIER_TIE)) ? 1UL : 0UL); -} - -/** - * @brief Enable break interrupt (BIE). - * @rmtoll DIER BIE LL_TIM_EnableIT_BRK - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_EnableIT_BRK(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->DIER, TIM_DIER_BIE); -} - -/** - * @brief Disable break interrupt (BIE). - * @rmtoll DIER BIE LL_TIM_DisableIT_BRK - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_DisableIT_BRK(TIM_TypeDef *TIMx) -{ - CLEAR_BIT(TIMx->DIER, TIM_DIER_BIE); -} - -/** - * @brief Indicates whether the break interrupt (BIE) is enabled. - * @rmtoll DIER BIE LL_TIM_IsEnabledIT_BRK - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_BRK(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->DIER, TIM_DIER_BIE) == (TIM_DIER_BIE)) ? 1UL : 0UL); -} - -/** - * @} - */ - -/** @defgroup TIM_LL_EF_DMA_Management DMA Management - * @{ - */ -/** - * @brief Enable update DMA request (UDE). - * @rmtoll DIER UDE LL_TIM_EnableDMAReq_UPDATE - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_EnableDMAReq_UPDATE(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->DIER, TIM_DIER_UDE); -} - -/** - * @brief Disable update DMA request (UDE). - * @rmtoll DIER UDE LL_TIM_DisableDMAReq_UPDATE - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_DisableDMAReq_UPDATE(TIM_TypeDef *TIMx) -{ - CLEAR_BIT(TIMx->DIER, TIM_DIER_UDE); -} - -/** - * @brief Indicates whether the update DMA request (UDE) is enabled. - * @rmtoll DIER UDE LL_TIM_IsEnabledDMAReq_UPDATE - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_UPDATE(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->DIER, TIM_DIER_UDE) == (TIM_DIER_UDE)) ? 1UL : 0UL); -} - -/** - * @brief Enable capture/compare 1 DMA request (CC1DE). - * @rmtoll DIER CC1DE LL_TIM_EnableDMAReq_CC1 - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_EnableDMAReq_CC1(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->DIER, TIM_DIER_CC1DE); -} - -/** - * @brief Disable capture/compare 1 DMA request (CC1DE). - * @rmtoll DIER CC1DE LL_TIM_DisableDMAReq_CC1 - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_DisableDMAReq_CC1(TIM_TypeDef *TIMx) -{ - CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1DE); -} - -/** - * @brief Indicates whether the capture/compare 1 DMA request (CC1DE) is enabled. - * @rmtoll DIER CC1DE LL_TIM_IsEnabledDMAReq_CC1 - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC1(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->DIER, TIM_DIER_CC1DE) == (TIM_DIER_CC1DE)) ? 1UL : 0UL); -} - -/** - * @brief Enable capture/compare 2 DMA request (CC2DE). - * @rmtoll DIER CC2DE LL_TIM_EnableDMAReq_CC2 - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_EnableDMAReq_CC2(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->DIER, TIM_DIER_CC2DE); -} - -/** - * @brief Disable capture/compare 2 DMA request (CC2DE). - * @rmtoll DIER CC2DE LL_TIM_DisableDMAReq_CC2 - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_DisableDMAReq_CC2(TIM_TypeDef *TIMx) -{ - CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2DE); -} - -/** - * @brief Indicates whether the capture/compare 2 DMA request (CC2DE) is enabled. - * @rmtoll DIER CC2DE LL_TIM_IsEnabledDMAReq_CC2 - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC2(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->DIER, TIM_DIER_CC2DE) == (TIM_DIER_CC2DE)) ? 1UL : 0UL); -} - -/** - * @brief Enable capture/compare 3 DMA request (CC3DE). - * @rmtoll DIER CC3DE LL_TIM_EnableDMAReq_CC3 - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_EnableDMAReq_CC3(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->DIER, TIM_DIER_CC3DE); -} - -/** - * @brief Disable capture/compare 3 DMA request (CC3DE). - * @rmtoll DIER CC3DE LL_TIM_DisableDMAReq_CC3 - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_DisableDMAReq_CC3(TIM_TypeDef *TIMx) -{ - CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3DE); -} - -/** - * @brief Indicates whether the capture/compare 3 DMA request (CC3DE) is enabled. - * @rmtoll DIER CC3DE LL_TIM_IsEnabledDMAReq_CC3 - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC3(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->DIER, TIM_DIER_CC3DE) == (TIM_DIER_CC3DE)) ? 1UL : 0UL); -} - -/** - * @brief Enable capture/compare 4 DMA request (CC4DE). - * @rmtoll DIER CC4DE LL_TIM_EnableDMAReq_CC4 - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_EnableDMAReq_CC4(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->DIER, TIM_DIER_CC4DE); -} - -/** - * @brief Disable capture/compare 4 DMA request (CC4DE). - * @rmtoll DIER CC4DE LL_TIM_DisableDMAReq_CC4 - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_DisableDMAReq_CC4(TIM_TypeDef *TIMx) -{ - CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4DE); -} - -/** - * @brief Indicates whether the capture/compare 4 DMA request (CC4DE) is enabled. - * @rmtoll DIER CC4DE LL_TIM_IsEnabledDMAReq_CC4 - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC4(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->DIER, TIM_DIER_CC4DE) == (TIM_DIER_CC4DE)) ? 1UL : 0UL); -} - -/** - * @brief Enable commutation DMA request (COMDE). - * @rmtoll DIER COMDE LL_TIM_EnableDMAReq_COM - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_EnableDMAReq_COM(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->DIER, TIM_DIER_COMDE); -} - -/** - * @brief Disable commutation DMA request (COMDE). - * @rmtoll DIER COMDE LL_TIM_DisableDMAReq_COM - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_DisableDMAReq_COM(TIM_TypeDef *TIMx) -{ - CLEAR_BIT(TIMx->DIER, TIM_DIER_COMDE); -} - -/** - * @brief Indicates whether the commutation DMA request (COMDE) is enabled. - * @rmtoll DIER COMDE LL_TIM_IsEnabledDMAReq_COM - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_COM(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->DIER, TIM_DIER_COMDE) == (TIM_DIER_COMDE)) ? 1UL : 0UL); -} - -/** - * @brief Enable trigger interrupt (TDE). - * @rmtoll DIER TDE LL_TIM_EnableDMAReq_TRIG - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_EnableDMAReq_TRIG(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->DIER, TIM_DIER_TDE); -} - -/** - * @brief Disable trigger interrupt (TDE). - * @rmtoll DIER TDE LL_TIM_DisableDMAReq_TRIG - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_DisableDMAReq_TRIG(TIM_TypeDef *TIMx) -{ - CLEAR_BIT(TIMx->DIER, TIM_DIER_TDE); -} - -/** - * @brief Indicates whether the trigger interrupt (TDE) is enabled. - * @rmtoll DIER TDE LL_TIM_IsEnabledDMAReq_TRIG - * @param TIMx Timer instance - * @retval State of bit (1 or 0). - */ -__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_TRIG(TIM_TypeDef *TIMx) -{ - return ((READ_BIT(TIMx->DIER, TIM_DIER_TDE) == (TIM_DIER_TDE)) ? 1UL : 0UL); -} - -/** - * @} - */ - -/** @defgroup TIM_LL_EF_EVENT_Management EVENT-Management - * @{ - */ -/** - * @brief Generate an update event. - * @rmtoll EGR UG LL_TIM_GenerateEvent_UPDATE - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_GenerateEvent_UPDATE(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->EGR, TIM_EGR_UG); -} - -/** - * @brief Generate Capture/Compare 1 event. - * @rmtoll EGR CC1G LL_TIM_GenerateEvent_CC1 - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_GenerateEvent_CC1(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->EGR, TIM_EGR_CC1G); -} - -/** - * @brief Generate Capture/Compare 2 event. - * @rmtoll EGR CC2G LL_TIM_GenerateEvent_CC2 - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_GenerateEvent_CC2(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->EGR, TIM_EGR_CC2G); -} - -/** - * @brief Generate Capture/Compare 3 event. - * @rmtoll EGR CC3G LL_TIM_GenerateEvent_CC3 - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_GenerateEvent_CC3(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->EGR, TIM_EGR_CC3G); -} - -/** - * @brief Generate Capture/Compare 4 event. - * @rmtoll EGR CC4G LL_TIM_GenerateEvent_CC4 - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_GenerateEvent_CC4(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->EGR, TIM_EGR_CC4G); -} - -/** - * @brief Generate commutation event. - * @rmtoll EGR COMG LL_TIM_GenerateEvent_COM - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_GenerateEvent_COM(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->EGR, TIM_EGR_COMG); -} - -/** - * @brief Generate trigger event. - * @rmtoll EGR TG LL_TIM_GenerateEvent_TRIG - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_GenerateEvent_TRIG(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->EGR, TIM_EGR_TG); -} - -/** - * @brief Generate break event. - * @rmtoll EGR BG LL_TIM_GenerateEvent_BRK - * @param TIMx Timer instance - * @retval None - */ -__STATIC_INLINE void LL_TIM_GenerateEvent_BRK(TIM_TypeDef *TIMx) -{ - SET_BIT(TIMx->EGR, TIM_EGR_BG); -} - -/** - * @} - */ - -#if defined(USE_FULL_LL_DRIVER) -/** @defgroup TIM_LL_EF_Init Initialisation and deinitialisation functions - * @{ - */ - -ErrorStatus LL_TIM_DeInit(TIM_TypeDef *TIMx); -void LL_TIM_StructInit(LL_TIM_InitTypeDef *TIM_InitStruct); -ErrorStatus LL_TIM_Init(TIM_TypeDef *TIMx, LL_TIM_InitTypeDef *TIM_InitStruct); -void LL_TIM_OC_StructInit(LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct); -ErrorStatus LL_TIM_OC_Init(TIM_TypeDef *TIMx, uint32_t Channel, LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct); -void LL_TIM_IC_StructInit(LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); -ErrorStatus LL_TIM_IC_Init(TIM_TypeDef *TIMx, uint32_t Channel, LL_TIM_IC_InitTypeDef *TIM_IC_InitStruct); -void LL_TIM_ENCODER_StructInit(LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct); -ErrorStatus LL_TIM_ENCODER_Init(TIM_TypeDef *TIMx, LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct); -void LL_TIM_HALLSENSOR_StructInit(LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct); -ErrorStatus LL_TIM_HALLSENSOR_Init(TIM_TypeDef *TIMx, LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct); -void LL_TIM_BDTR_StructInit(LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct); -ErrorStatus LL_TIM_BDTR_Init(TIM_TypeDef *TIMx, LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct); -/** - * @} - */ -#endif /* USE_FULL_LL_DRIVER */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* TIM1 || TIM2 || TIM3 || TIM4 || TIM5 || TIM6 || TIM7 || TIM8 || TIM9 || TIM10 || TIM11 || TIM12 || TIM13 || TIM14 */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_TIM_H */ +/** + ****************************************************************************** + * @file stm32f4xx_ll_tim.h + * @author MCD Application Team + * @brief Header file of TIM LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_LL_TIM_H +#define __STM32F4xx_LL_TIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_LL_Driver + * @{ + */ + +#if defined (TIM1) || defined (TIM2) || defined (TIM3) || defined (TIM4) || defined (TIM5) || defined (TIM6) || defined (TIM7) || defined (TIM8) || defined (TIM9) || defined (TIM10) || defined (TIM11) || defined (TIM12) || defined (TIM13) || defined (TIM14) + +/** @defgroup TIM_LL TIM + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup TIM_LL_Private_Variables TIM Private Variables + * @{ + */ +static const uint8_t OFFSET_TAB_CCMRx[] = +{ + 0x00U, /* 0: TIMx_CH1 */ + 0x00U, /* 1: TIMx_CH1N */ + 0x00U, /* 2: TIMx_CH2 */ + 0x00U, /* 3: TIMx_CH2N */ + 0x04U, /* 4: TIMx_CH3 */ + 0x04U, /* 5: TIMx_CH3N */ + 0x04U /* 6: TIMx_CH4 */ +}; + +static const uint8_t SHIFT_TAB_OCxx[] = +{ + 0U, /* 0: OC1M, OC1FE, OC1PE */ + 0U, /* 1: - NA */ + 8U, /* 2: OC2M, OC2FE, OC2PE */ + 0U, /* 3: - NA */ + 0U, /* 4: OC3M, OC3FE, OC3PE */ + 0U, /* 5: - NA */ + 8U /* 6: OC4M, OC4FE, OC4PE */ +}; + +static const uint8_t SHIFT_TAB_ICxx[] = +{ + 0U, /* 0: CC1S, IC1PSC, IC1F */ + 0U, /* 1: - NA */ + 8U, /* 2: CC2S, IC2PSC, IC2F */ + 0U, /* 3: - NA */ + 0U, /* 4: CC3S, IC3PSC, IC3F */ + 0U, /* 5: - NA */ + 8U /* 6: CC4S, IC4PSC, IC4F */ +}; + +static const uint8_t SHIFT_TAB_CCxP[] = +{ + 0U, /* 0: CC1P */ + 2U, /* 1: CC1NP */ + 4U, /* 2: CC2P */ + 6U, /* 3: CC2NP */ + 8U, /* 4: CC3P */ + 10U, /* 5: CC3NP */ + 12U /* 6: CC4P */ +}; + +static const uint8_t SHIFT_TAB_OISx[] = +{ + 0U, /* 0: OIS1 */ + 1U, /* 1: OIS1N */ + 2U, /* 2: OIS2 */ + 3U, /* 3: OIS2N */ + 4U, /* 4: OIS3 */ + 5U, /* 5: OIS3N */ + 6U /* 6: OIS4 */ +}; +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIM_LL_Private_Constants TIM Private Constants + * @{ + */ + + +/* Remap mask definitions */ +#define TIMx_OR_RMP_SHIFT 16U +#define TIMx_OR_RMP_MASK 0x0000FFFFU +#define TIM2_OR_RMP_MASK (TIM_OR_ITR1_RMP << TIMx_OR_RMP_SHIFT) +#define TIM5_OR_RMP_MASK (TIM_OR_TI4_RMP << TIMx_OR_RMP_SHIFT) +#define TIM11_OR_RMP_MASK (TIM_OR_TI1_RMP << TIMx_OR_RMP_SHIFT) + +/* Mask used to set the TDG[x:0] of the DTG bits of the TIMx_BDTR register */ +#define DT_DELAY_1 ((uint8_t)0x7F) +#define DT_DELAY_2 ((uint8_t)0x3F) +#define DT_DELAY_3 ((uint8_t)0x1F) +#define DT_DELAY_4 ((uint8_t)0x1F) + +/* Mask used to set the DTG[7:5] bits of the DTG bits of the TIMx_BDTR register */ +#define DT_RANGE_1 ((uint8_t)0x00) +#define DT_RANGE_2 ((uint8_t)0x80) +#define DT_RANGE_3 ((uint8_t)0xC0) +#define DT_RANGE_4 ((uint8_t)0xE0) + + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup TIM_LL_Private_Macros TIM Private Macros + * @{ + */ +/** @brief Convert channel id into channel index. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval none + */ +#define TIM_GET_CHANNEL_INDEX( __CHANNEL__) \ + (((__CHANNEL__) == LL_TIM_CHANNEL_CH1) ? 0U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH1N) ? 1U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH2) ? 2U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH2N) ? 3U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH3) ? 4U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH3N) ? 5U : 6U) + +/** @brief Calculate the deadtime sampling period(in ps). + * @param __TIMCLK__ timer input clock frequency (in Hz). + * @param __CKD__ This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + * @retval none + */ +#define TIM_CALC_DTS(__TIMCLK__, __CKD__) \ + (((__CKD__) == LL_TIM_CLOCKDIVISION_DIV1) ? ((uint64_t)1000000000000U/(__TIMCLK__)) : \ + ((__CKD__) == LL_TIM_CLOCKDIVISION_DIV2) ? ((uint64_t)1000000000000U/((__TIMCLK__) >> 1U)) : \ + ((uint64_t)1000000000000U/((__TIMCLK__) >> 2U))) +/** + * @} + */ + + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_ES_INIT TIM Exported Init structure + * @{ + */ + +/** + * @brief TIM Time Base configuration structure definition. + */ +typedef struct +{ + uint16_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetPrescaler().*/ + + uint32_t CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_LL_EC_COUNTERMODE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetCounterMode().*/ + + uint32_t Autoreload; /*!< Specifies the auto reload value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter must be a number between Min_Data=0x0000 and Max_Data=0xFFFF. + Some timer instances may support 32 bits counters. In that case this parameter must + be a number between 0x0000 and 0xFFFFFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetAutoReload().*/ + + uint32_t ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_LL_EC_CLOCKDIVISION. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetClockDivision().*/ + + uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + GP timers: this parameter must be a number between Min_Data = 0x00 and + Max_Data = 0xFF. + Advanced timers: this parameter must be a number between Min_Data = 0x0000 and + Max_Data = 0xFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetRepetitionCounter().*/ +} LL_TIM_InitTypeDef; + +/** + * @brief TIM Output Compare configuration structure definition. + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the output mode. + This parameter can be a value of @ref TIM_LL_EC_OCMODE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetMode().*/ + + uint32_t OCState; /*!< Specifies the TIM Output Compare state. + This parameter can be a value of @ref TIM_LL_EC_OCSTATE. + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/ + + uint32_t OCNState; /*!< Specifies the TIM complementary Output Compare state. + This parameter can be a value of @ref TIM_LL_EC_OCSTATE. + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/ + + uint32_t CompareValue; /*!< Specifies the Compare value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF. + + This feature can be modified afterwards using unitary function + LL_TIM_OC_SetCompareCHx (x=1..6).*/ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetPolarity().*/ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetPolarity().*/ + + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetIdleState().*/ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetIdleState().*/ +} LL_TIM_OC_InitTypeDef; + +/** + * @brief TIM Input Capture configuration structure definition. + */ + +typedef struct +{ + + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t ICActiveInput; /*!< Specifies the input. + This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetActiveInput().*/ + + uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetFilter().*/ +} LL_TIM_IC_InitTypeDef; + + +/** + * @brief TIM Encoder interface configuration structure definition. + */ +typedef struct +{ + uint32_t EncoderMode; /*!< Specifies the encoder resolution (x2 or x4). + This parameter can be a value of @ref TIM_LL_EC_ENCODERMODE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetEncoderMode().*/ + + uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t IC1ActiveInput; /*!< Specifies the TI1 input source + This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetActiveInput().*/ + + uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t IC1Filter; /*!< Specifies the TI1 input filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetFilter().*/ + + uint32_t IC2Polarity; /*!< Specifies the active edge of TI2 input. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t IC2ActiveInput; /*!< Specifies the TI2 input source + This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetActiveInput().*/ + + uint32_t IC2Prescaler; /*!< Specifies the TI2 input prescaler value. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t IC2Filter; /*!< Specifies the TI2 input filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetFilter().*/ + +} LL_TIM_ENCODER_InitTypeDef; + +/** + * @brief TIM Hall sensor interface configuration structure definition. + */ +typedef struct +{ + + uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value. + Prescaler must be set to get a maximum counter period longer than the + time interval between 2 consecutive changes on the Hall inputs. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t IC1Filter; /*!< Specifies the TI1 input filter. + This parameter can be a value of + @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetFilter().*/ + + uint32_t CommutationDelay; /*!< Specifies the compare value to be loaded into the Capture Compare Register. + A positive pulse (TRGO event) is generated with a programmable delay every time + a change occurs on the Hall inputs. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetCompareCH2().*/ +} LL_TIM_HALLSENSOR_InitTypeDef; + +/** + * @brief BDTR (Break and Dead Time) structure definition + */ +typedef struct +{ + uint32_t OSSRState; /*!< Specifies the Off-State selection used in Run mode. + This parameter can be a value of @ref TIM_LL_EC_OSSR + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetOffStates() + + @note This bit-field cannot be modified as long as LOCK level 2 has been + programmed. */ + + uint32_t OSSIState; /*!< Specifies the Off-State used in Idle state. + This parameter can be a value of @ref TIM_LL_EC_OSSI + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetOffStates() + + @note This bit-field cannot be modified as long as LOCK level 2 has been + programmed. */ + + uint32_t LockLevel; /*!< Specifies the LOCK level parameters. + This parameter can be a value of @ref TIM_LL_EC_LOCKLEVEL + + @note The LOCK bits can be written only once after the reset. Once the TIMx_BDTR + register has been written, their content is frozen until the next reset.*/ + + uint8_t DeadTime; /*!< Specifies the delay time between the switching-off and the + switching-on of the outputs. + This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetDeadTime() + + @note This bit-field can not be modified as long as LOCK level 1, 2 or 3 has been + programmed. */ + + uint16_t BreakState; /*!< Specifies whether the TIM Break input is enabled or not. + This parameter can be a value of @ref TIM_LL_EC_BREAK_ENABLE + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_EnableBRK() or @ref LL_TIM_DisableBRK() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ + + uint32_t BreakPolarity; /*!< Specifies the TIM Break Input pin polarity. + This parameter can be a value of @ref TIM_LL_EC_BREAK_POLARITY + + This feature can be modified afterwards using unitary function + @ref LL_TIM_ConfigBRK() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ + + uint32_t AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not. + This parameter can be a value of @ref TIM_LL_EC_AUTOMATICOUTPUT_ENABLE + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_EnableAutomaticOutput() or @ref LL_TIM_DisableAutomaticOutput() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ +} LL_TIM_BDTR_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIM_LL_Exported_Constants TIM Exported Constants + * @{ + */ + +/** @defgroup TIM_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_TIM_ReadReg function. + * @{ + */ +#define LL_TIM_SR_UIF TIM_SR_UIF /*!< Update interrupt flag */ +#define LL_TIM_SR_CC1IF TIM_SR_CC1IF /*!< Capture/compare 1 interrupt flag */ +#define LL_TIM_SR_CC2IF TIM_SR_CC2IF /*!< Capture/compare 2 interrupt flag */ +#define LL_TIM_SR_CC3IF TIM_SR_CC3IF /*!< Capture/compare 3 interrupt flag */ +#define LL_TIM_SR_CC4IF TIM_SR_CC4IF /*!< Capture/compare 4 interrupt flag */ +#define LL_TIM_SR_COMIF TIM_SR_COMIF /*!< COM interrupt flag */ +#define LL_TIM_SR_TIF TIM_SR_TIF /*!< Trigger interrupt flag */ +#define LL_TIM_SR_BIF TIM_SR_BIF /*!< Break interrupt flag */ +#define LL_TIM_SR_CC1OF TIM_SR_CC1OF /*!< Capture/Compare 1 overcapture flag */ +#define LL_TIM_SR_CC2OF TIM_SR_CC2OF /*!< Capture/Compare 2 overcapture flag */ +#define LL_TIM_SR_CC3OF TIM_SR_CC3OF /*!< Capture/Compare 3 overcapture flag */ +#define LL_TIM_SR_CC4OF TIM_SR_CC4OF /*!< Capture/Compare 4 overcapture flag */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_EC_BREAK_ENABLE Break Enable + * @{ + */ +#define LL_TIM_BREAK_DISABLE 0x00000000U /*!< Break function disabled */ +#define LL_TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break function enabled */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_AUTOMATICOUTPUT_ENABLE Automatic output enable + * @{ + */ +#define LL_TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ +#define LL_TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup TIM_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_TIM_ReadReg and LL_TIM_WriteReg functions. + * @{ + */ +#define LL_TIM_DIER_UIE TIM_DIER_UIE /*!< Update interrupt enable */ +#define LL_TIM_DIER_CC1IE TIM_DIER_CC1IE /*!< Capture/compare 1 interrupt enable */ +#define LL_TIM_DIER_CC2IE TIM_DIER_CC2IE /*!< Capture/compare 2 interrupt enable */ +#define LL_TIM_DIER_CC3IE TIM_DIER_CC3IE /*!< Capture/compare 3 interrupt enable */ +#define LL_TIM_DIER_CC4IE TIM_DIER_CC4IE /*!< Capture/compare 4 interrupt enable */ +#define LL_TIM_DIER_COMIE TIM_DIER_COMIE /*!< COM interrupt enable */ +#define LL_TIM_DIER_TIE TIM_DIER_TIE /*!< Trigger interrupt enable */ +#define LL_TIM_DIER_BIE TIM_DIER_BIE /*!< Break interrupt enable */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_UPDATESOURCE Update Source + * @{ + */ +#define LL_TIM_UPDATESOURCE_REGULAR 0x00000000U /*!< Counter overflow/underflow, Setting the UG bit or Update generation through the slave mode controller generates an update request */ +#define LL_TIM_UPDATESOURCE_COUNTER TIM_CR1_URS /*!< Only counter overflow/underflow generates an update request */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_ONEPULSEMODE One Pulse Mode + * @{ + */ +#define LL_TIM_ONEPULSEMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */ +#define LL_TIM_ONEPULSEMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_COUNTERMODE Counter Mode + * @{ + */ +#define LL_TIM_COUNTERMODE_UP 0x00000000U /*!TIMx_CCRy else active.*/ +#define LL_TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!TIMx_CCRy else inactive*/ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_OCPOLARITY Output Configuration Polarity + * @{ + */ +#define LL_TIM_OCPOLARITY_HIGH 0x00000000U /*!< OCxactive high*/ +#define LL_TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< OCxactive low*/ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_OCIDLESTATE Output Configuration Idle State + * @{ + */ +#define LL_TIM_OCIDLESTATE_LOW 0x00000000U /*!__REG__, (__VALUE__)) + +/** + * @brief Read a value in TIM register. + * @param __INSTANCE__ TIM Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_TIM_ReadReg(__INSTANCE__, __REG__) READ_REG((__INSTANCE__)->__REG__) +/** + * @} + */ + +/** @defgroup TIM_LL_EM_Exported_Macros Exported_Macros + * @{ + */ + +/** + * @brief HELPER macro calculating DTG[0:7] in the TIMx_BDTR register to achieve the requested dead time duration. + * @note ex: @ref __LL_TIM_CALC_DEADTIME (80000000, @ref LL_TIM_GetClockDivision (), 120); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __CKD__ This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + * @param __DT__ deadtime duration (in ns) + * @retval DTG[0:7] + */ +#define __LL_TIM_CALC_DEADTIME(__TIMCLK__, __CKD__, __DT__) \ + ( (((uint64_t)((__DT__)*1000U)) < ((DT_DELAY_1+1U) * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(((uint64_t)((__DT__)*1000U) / TIM_CALC_DTS((__TIMCLK__), (__CKD__))) & DT_DELAY_1) : \ + (((uint64_t)((__DT__)*1000U)) < ((64U + (DT_DELAY_2+1U)) * 2U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(DT_RANGE_2 | ((uint8_t)((uint8_t)((((uint64_t)((__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \ + (__CKD__))) >> 1U) - (uint8_t) 64) & DT_DELAY_2)) :\ + (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_3+1U)) * 8U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(DT_RANGE_3 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \ + (__CKD__))) >> 3U) - (uint8_t) 32) & DT_DELAY_3)) :\ + (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_4+1U)) * 16U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(DT_RANGE_4 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \ + (__CKD__))) >> 4U) - (uint8_t) 32) & DT_DELAY_4)) :\ + 0U) + +/** + * @brief HELPER macro calculating the prescaler value to achieve the required counter clock frequency. + * @note ex: @ref __LL_TIM_CALC_PSC (80000000, 1000000); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __CNTCLK__ counter clock frequency (in Hz) + * @retval Prescaler value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_PSC(__TIMCLK__, __CNTCLK__) \ + (((__TIMCLK__) >= (__CNTCLK__)) ? (uint32_t)((((__TIMCLK__) + (__CNTCLK__)/2U)/(__CNTCLK__)) - 1U) : 0U) + +/** + * @brief HELPER macro calculating the auto-reload value to achieve the required output signal frequency. + * @note ex: @ref __LL_TIM_CALC_ARR (1000000, @ref LL_TIM_GetPrescaler (), 10000); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __FREQ__ output signal frequency (in Hz) + * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_ARR(__TIMCLK__, __PSC__, __FREQ__) \ + ((((__TIMCLK__)/((__PSC__) + 1U)) >= (__FREQ__)) ? (((__TIMCLK__)/((__FREQ__) * ((__PSC__) + 1U))) - 1U) : 0U) + +/** + * @brief HELPER macro calculating the compare value required to achieve the required timer output compare + * active/inactive delay. + * @note ex: @ref __LL_TIM_CALC_DELAY (1000000, @ref LL_TIM_GetPrescaler (), 10); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __DELAY__ timer output compare active/inactive delay (in us) + * @retval Compare value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_DELAY(__TIMCLK__, __PSC__, __DELAY__) \ + ((uint32_t)(((uint64_t)(__TIMCLK__) * (uint64_t)(__DELAY__)) \ + / ((uint64_t)1000000U * (uint64_t)((__PSC__) + 1U)))) + +/** + * @brief HELPER macro calculating the auto-reload value to achieve the required pulse duration + * (when the timer operates in one pulse mode). + * @note ex: @ref __LL_TIM_CALC_PULSE (1000000, @ref LL_TIM_GetPrescaler (), 10, 20); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __DELAY__ timer output compare active/inactive delay (in us) + * @param __PULSE__ pulse duration (in us) + * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_PULSE(__TIMCLK__, __PSC__, __DELAY__, __PULSE__) \ + ((uint32_t)(__LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__PULSE__)) \ + + __LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__DELAY__)))) + +/** + * @brief HELPER macro retrieving the ratio of the input capture prescaler + * @note ex: @ref __LL_TIM_GET_ICPSC_RATIO (@ref LL_TIM_IC_GetPrescaler ()); + * @param __ICPSC__ This parameter can be one of the following values: + * @arg @ref LL_TIM_ICPSC_DIV1 + * @arg @ref LL_TIM_ICPSC_DIV2 + * @arg @ref LL_TIM_ICPSC_DIV4 + * @arg @ref LL_TIM_ICPSC_DIV8 + * @retval Input capture prescaler ratio (1, 2, 4 or 8) + */ +#define __LL_TIM_GET_ICPSC_RATIO(__ICPSC__) \ + ((uint32_t)(0x01U << (((__ICPSC__) >> 16U) >> TIM_CCMR1_IC1PSC_Pos))) + + +/** + * @} + */ + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup TIM_LL_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @defgroup TIM_LL_EF_Time_Base Time Base configuration + * @{ + */ +/** + * @brief Enable timer counter. + * @rmtoll CR1 CEN LL_TIM_EnableCounter + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableCounter(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_CEN); +} + +/** + * @brief Disable timer counter. + * @rmtoll CR1 CEN LL_TIM_DisableCounter + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableCounter(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_CEN); +} + +/** + * @brief Indicates whether the timer counter is enabled. + * @rmtoll CR1 CEN LL_TIM_IsEnabledCounter + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledCounter(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR1, TIM_CR1_CEN) == (TIM_CR1_CEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable update event generation. + * @rmtoll CR1 UDIS LL_TIM_EnableUpdateEvent + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableUpdateEvent(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_UDIS); +} + +/** + * @brief Disable update event generation. + * @rmtoll CR1 UDIS LL_TIM_DisableUpdateEvent + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableUpdateEvent(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_UDIS); +} + +/** + * @brief Indicates whether update event generation is enabled. + * @rmtoll CR1 UDIS LL_TIM_IsEnabledUpdateEvent + * @param TIMx Timer instance + * @retval Inverted state of bit (0 or 1). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledUpdateEvent(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR1, TIM_CR1_UDIS) == (uint32_t)RESET) ? 1UL : 0UL); +} + +/** + * @brief Set update event source + * @note Update event source set to LL_TIM_UPDATESOURCE_REGULAR: any of the following events + * generate an update interrupt or DMA request if enabled: + * - Counter overflow/underflow + * - Setting the UG bit + * - Update generation through the slave mode controller + * @note Update event source set to LL_TIM_UPDATESOURCE_COUNTER: only counter + * overflow/underflow generates an update interrupt or DMA request if enabled. + * @rmtoll CR1 URS LL_TIM_SetUpdateSource + * @param TIMx Timer instance + * @param UpdateSource This parameter can be one of the following values: + * @arg @ref LL_TIM_UPDATESOURCE_REGULAR + * @arg @ref LL_TIM_UPDATESOURCE_COUNTER + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetUpdateSource(TIM_TypeDef *TIMx, uint32_t UpdateSource) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_URS, UpdateSource); +} + +/** + * @brief Get actual event update source + * @rmtoll CR1 URS LL_TIM_GetUpdateSource + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_UPDATESOURCE_REGULAR + * @arg @ref LL_TIM_UPDATESOURCE_COUNTER + */ +__STATIC_INLINE uint32_t LL_TIM_GetUpdateSource(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_URS)); +} + +/** + * @brief Set one pulse mode (one shot v.s. repetitive). + * @rmtoll CR1 OPM LL_TIM_SetOnePulseMode + * @param TIMx Timer instance + * @param OnePulseMode This parameter can be one of the following values: + * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE + * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetOnePulseMode(TIM_TypeDef *TIMx, uint32_t OnePulseMode) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_OPM, OnePulseMode); +} + +/** + * @brief Get actual one pulse mode. + * @rmtoll CR1 OPM LL_TIM_GetOnePulseMode + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE + * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE + */ +__STATIC_INLINE uint32_t LL_TIM_GetOnePulseMode(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_OPM)); +} + +/** + * @brief Set the timer counter counting mode. + * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to + * check whether or not the counter mode selection feature is supported + * by a timer instance. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * @rmtoll CR1 DIR LL_TIM_SetCounterMode\n + * CR1 CMS LL_TIM_SetCounterMode + * @param TIMx Timer instance + * @param CounterMode This parameter can be one of the following values: + * @arg @ref LL_TIM_COUNTERMODE_UP + * @arg @ref LL_TIM_COUNTERMODE_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP + * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetCounterMode(TIM_TypeDef *TIMx, uint32_t CounterMode) +{ + MODIFY_REG(TIMx->CR1, (TIM_CR1_DIR | TIM_CR1_CMS), CounterMode); +} + +/** + * @brief Get actual counter mode. + * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to + * check whether or not the counter mode selection feature is supported + * by a timer instance. + * @rmtoll CR1 DIR LL_TIM_GetCounterMode\n + * CR1 CMS LL_TIM_GetCounterMode + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_COUNTERMODE_UP + * @arg @ref LL_TIM_COUNTERMODE_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP + * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN + */ +__STATIC_INLINE uint32_t LL_TIM_GetCounterMode(TIM_TypeDef *TIMx) +{ + uint32_t counter_mode; + + counter_mode = (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CMS)); + + if (counter_mode == 0U) + { + counter_mode = (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR)); + } + + return counter_mode; +} + +/** + * @brief Enable auto-reload (ARR) preload. + * @rmtoll CR1 ARPE LL_TIM_EnableARRPreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableARRPreload(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_ARPE); +} + +/** + * @brief Disable auto-reload (ARR) preload. + * @rmtoll CR1 ARPE LL_TIM_DisableARRPreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableARRPreload(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_ARPE); +} + +/** + * @brief Indicates whether auto-reload (ARR) preload is enabled. + * @rmtoll CR1 ARPE LL_TIM_IsEnabledARRPreload + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledARRPreload(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR1, TIM_CR1_ARPE) == (TIM_CR1_ARPE)) ? 1UL : 0UL); +} + +/** + * @brief Set the division ratio between the timer clock and the sampling clock used by the dead-time generators + * (when supported) and the digital filters. + * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check + * whether or not the clock division feature is supported by the timer + * instance. + * @rmtoll CR1 CKD LL_TIM_SetClockDivision + * @param TIMx Timer instance + * @param ClockDivision This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetClockDivision(TIM_TypeDef *TIMx, uint32_t ClockDivision) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_CKD, ClockDivision); +} + +/** + * @brief Get the actual division ratio between the timer clock and the sampling clock used by the dead-time + * generators (when supported) and the digital filters. + * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check + * whether or not the clock division feature is supported by the timer + * instance. + * @rmtoll CR1 CKD LL_TIM_GetClockDivision + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + */ +__STATIC_INLINE uint32_t LL_TIM_GetClockDivision(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CKD)); +} + +/** + * @brief Set the counter value. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @rmtoll CNT CNT LL_TIM_SetCounter + * @param TIMx Timer instance + * @param Counter Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF) + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetCounter(TIM_TypeDef *TIMx, uint32_t Counter) +{ + WRITE_REG(TIMx->CNT, Counter); +} + +/** + * @brief Get the counter value. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @rmtoll CNT CNT LL_TIM_GetCounter + * @param TIMx Timer instance + * @retval Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF) + */ +__STATIC_INLINE uint32_t LL_TIM_GetCounter(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CNT)); +} + +/** + * @brief Get the current direction of the counter + * @rmtoll CR1 DIR LL_TIM_GetDirection + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_COUNTERDIRECTION_UP + * @arg @ref LL_TIM_COUNTERDIRECTION_DOWN + */ +__STATIC_INLINE uint32_t LL_TIM_GetDirection(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR)); +} + +/** + * @brief Set the prescaler value. + * @note The counter clock frequency CK_CNT is equal to fCK_PSC / (PSC[15:0] + 1). + * @note The prescaler can be changed on the fly as this control register is buffered. The new + * prescaler ratio is taken into account at the next update event. + * @note Helper macro @ref __LL_TIM_CALC_PSC can be used to calculate the Prescaler parameter + * @rmtoll PSC PSC LL_TIM_SetPrescaler + * @param TIMx Timer instance + * @param Prescaler between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Prescaler) +{ + WRITE_REG(TIMx->PSC, Prescaler); +} + +/** + * @brief Get the prescaler value. + * @rmtoll PSC PSC LL_TIM_GetPrescaler + * @param TIMx Timer instance + * @retval Prescaler value between Min_Data=0 and Max_Data=65535 + */ +__STATIC_INLINE uint32_t LL_TIM_GetPrescaler(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->PSC)); +} + +/** + * @brief Set the auto-reload value. + * @note The counter is blocked while the auto-reload value is null. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Helper macro @ref __LL_TIM_CALC_ARR can be used to calculate the AutoReload parameter + * @rmtoll ARR ARR LL_TIM_SetAutoReload + * @param TIMx Timer instance + * @param AutoReload between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetAutoReload(TIM_TypeDef *TIMx, uint32_t AutoReload) +{ + WRITE_REG(TIMx->ARR, AutoReload); +} + +/** + * @brief Get the auto-reload value. + * @rmtoll ARR ARR LL_TIM_GetAutoReload + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @param TIMx Timer instance + * @retval Auto-reload value + */ +__STATIC_INLINE uint32_t LL_TIM_GetAutoReload(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->ARR)); +} + +/** + * @brief Set the repetition counter value. + * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a repetition counter. + * @rmtoll RCR REP LL_TIM_SetRepetitionCounter + * @param TIMx Timer instance + * @param RepetitionCounter between Min_Data=0 and Max_Data=255 or 65535 for advanced timer. + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetRepetitionCounter(TIM_TypeDef *TIMx, uint32_t RepetitionCounter) +{ + WRITE_REG(TIMx->RCR, RepetitionCounter); +} + +/** + * @brief Get the repetition counter value. + * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a repetition counter. + * @rmtoll RCR REP LL_TIM_GetRepetitionCounter + * @param TIMx Timer instance + * @retval Repetition counter value + */ +__STATIC_INLINE uint32_t LL_TIM_GetRepetitionCounter(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->RCR)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Capture_Compare Capture Compare configuration + * @{ + */ +/** + * @brief Enable the capture/compare control bits (CCxE, CCxNE and OCxM) preload. + * @note CCxE, CCxNE and OCxM bits are preloaded, after having been written, + * they are updated only when a commutation event (COM) occurs. + * @note Only on channels that have a complementary output. + * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check + * whether or not a timer instance is able to generate a commutation event. + * @rmtoll CR2 CCPC LL_TIM_CC_EnablePreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_EnablePreload(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR2, TIM_CR2_CCPC); +} + +/** + * @brief Disable the capture/compare control bits (CCxE, CCxNE and OCxM) preload. + * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check + * whether or not a timer instance is able to generate a commutation event. + * @rmtoll CR2 CCPC LL_TIM_CC_DisablePreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_DisablePreload(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR2, TIM_CR2_CCPC); +} + +/** + * @brief Set the updated source of the capture/compare control bits (CCxE, CCxNE and OCxM). + * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check + * whether or not a timer instance is able to generate a commutation event. + * @rmtoll CR2 CCUS LL_TIM_CC_SetUpdate + * @param TIMx Timer instance + * @param CCUpdateSource This parameter can be one of the following values: + * @arg @ref LL_TIM_CCUPDATESOURCE_COMG_ONLY + * @arg @ref LL_TIM_CCUPDATESOURCE_COMG_AND_TRGI + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_SetUpdate(TIM_TypeDef *TIMx, uint32_t CCUpdateSource) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_CCUS, CCUpdateSource); +} + +/** + * @brief Set the trigger of the capture/compare DMA request. + * @rmtoll CR2 CCDS LL_TIM_CC_SetDMAReqTrigger + * @param TIMx Timer instance + * @param DMAReqTrigger This parameter can be one of the following values: + * @arg @ref LL_TIM_CCDMAREQUEST_CC + * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_SetDMAReqTrigger(TIM_TypeDef *TIMx, uint32_t DMAReqTrigger) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_CCDS, DMAReqTrigger); +} + +/** + * @brief Get actual trigger of the capture/compare DMA request. + * @rmtoll CR2 CCDS LL_TIM_CC_GetDMAReqTrigger + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_CCDMAREQUEST_CC + * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE + */ +__STATIC_INLINE uint32_t LL_TIM_CC_GetDMAReqTrigger(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR2, TIM_CR2_CCDS)); +} + +/** + * @brief Set the lock level to freeze the + * configuration of several capture/compare parameters. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * the lock mechanism is supported by a timer instance. + * @rmtoll BDTR LOCK LL_TIM_CC_SetLockLevel + * @param TIMx Timer instance + * @param LockLevel This parameter can be one of the following values: + * @arg @ref LL_TIM_LOCKLEVEL_OFF + * @arg @ref LL_TIM_LOCKLEVEL_1 + * @arg @ref LL_TIM_LOCKLEVEL_2 + * @arg @ref LL_TIM_LOCKLEVEL_3 + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_SetLockLevel(TIM_TypeDef *TIMx, uint32_t LockLevel) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_LOCK, LockLevel); +} + +/** + * @brief Enable capture/compare channels. + * @rmtoll CCER CC1E LL_TIM_CC_EnableChannel\n + * CCER CC1NE LL_TIM_CC_EnableChannel\n + * CCER CC2E LL_TIM_CC_EnableChannel\n + * CCER CC2NE LL_TIM_CC_EnableChannel\n + * CCER CC3E LL_TIM_CC_EnableChannel\n + * CCER CC3NE LL_TIM_CC_EnableChannel\n + * CCER CC4E LL_TIM_CC_EnableChannel + * @param TIMx Timer instance + * @param Channels This parameter can be a combination of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_EnableChannel(TIM_TypeDef *TIMx, uint32_t Channels) +{ + SET_BIT(TIMx->CCER, Channels); +} + +/** + * @brief Disable capture/compare channels. + * @rmtoll CCER CC1E LL_TIM_CC_DisableChannel\n + * CCER CC1NE LL_TIM_CC_DisableChannel\n + * CCER CC2E LL_TIM_CC_DisableChannel\n + * CCER CC2NE LL_TIM_CC_DisableChannel\n + * CCER CC3E LL_TIM_CC_DisableChannel\n + * CCER CC3NE LL_TIM_CC_DisableChannel\n + * CCER CC4E LL_TIM_CC_DisableChannel + * @param TIMx Timer instance + * @param Channels This parameter can be a combination of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_DisableChannel(TIM_TypeDef *TIMx, uint32_t Channels) +{ + CLEAR_BIT(TIMx->CCER, Channels); +} + +/** + * @brief Indicate whether channel(s) is(are) enabled. + * @rmtoll CCER CC1E LL_TIM_CC_IsEnabledChannel\n + * CCER CC1NE LL_TIM_CC_IsEnabledChannel\n + * CCER CC2E LL_TIM_CC_IsEnabledChannel\n + * CCER CC2NE LL_TIM_CC_IsEnabledChannel\n + * CCER CC3E LL_TIM_CC_IsEnabledChannel\n + * CCER CC3NE LL_TIM_CC_IsEnabledChannel\n + * CCER CC4E LL_TIM_CC_IsEnabledChannel + * @param TIMx Timer instance + * @param Channels This parameter can be a combination of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_CC_IsEnabledChannel(TIM_TypeDef *TIMx, uint32_t Channels) +{ + return ((READ_BIT(TIMx->CCER, Channels) == (Channels)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Output_Channel Output channel configuration + * @{ + */ +/** + * @brief Configure an output channel. + * @rmtoll CCMR1 CC1S LL_TIM_OC_ConfigOutput\n + * CCMR1 CC2S LL_TIM_OC_ConfigOutput\n + * CCMR2 CC3S LL_TIM_OC_ConfigOutput\n + * CCMR2 CC4S LL_TIM_OC_ConfigOutput\n + * CCER CC1P LL_TIM_OC_ConfigOutput\n + * CCER CC2P LL_TIM_OC_ConfigOutput\n + * CCER CC3P LL_TIM_OC_ConfigOutput\n + * CCER CC4P LL_TIM_OC_ConfigOutput\n + * CR2 OIS1 LL_TIM_OC_ConfigOutput\n + * CR2 OIS2 LL_TIM_OC_ConfigOutput\n + * CR2 OIS3 LL_TIM_OC_ConfigOutput\n + * CR2 OIS4 LL_TIM_OC_ConfigOutput + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_TIM_OCPOLARITY_HIGH or @ref LL_TIM_OCPOLARITY_LOW + * @arg @ref LL_TIM_OCIDLESTATE_LOW or @ref LL_TIM_OCIDLESTATE_HIGH + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_ConfigOutput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_CC1S << SHIFT_TAB_OCxx[iChannel])); + MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), + (Configuration & TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]); + MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]), + (Configuration & TIM_CR2_OIS1) << SHIFT_TAB_OISx[iChannel]); +} + +/** + * @brief Define the behavior of the output reference signal OCxREF from which + * OCx and OCxN (when relevant) are derived. + * @rmtoll CCMR1 OC1M LL_TIM_OC_SetMode\n + * CCMR1 OC2M LL_TIM_OC_SetMode\n + * CCMR2 OC3M LL_TIM_OC_SetMode\n + * CCMR2 OC4M LL_TIM_OC_SetMode + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_TIM_OCMODE_FROZEN + * @arg @ref LL_TIM_OCMODE_ACTIVE + * @arg @ref LL_TIM_OCMODE_INACTIVE + * @arg @ref LL_TIM_OCMODE_TOGGLE + * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE + * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE + * @arg @ref LL_TIM_OCMODE_PWM1 + * @arg @ref LL_TIM_OCMODE_PWM2 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetMode(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Mode) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel]), Mode << SHIFT_TAB_OCxx[iChannel]); +} + +/** + * @brief Get the output compare mode of an output channel. + * @rmtoll CCMR1 OC1M LL_TIM_OC_GetMode\n + * CCMR1 OC2M LL_TIM_OC_GetMode\n + * CCMR2 OC3M LL_TIM_OC_GetMode\n + * CCMR2 OC4M LL_TIM_OC_GetMode + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_OCMODE_FROZEN + * @arg @ref LL_TIM_OCMODE_ACTIVE + * @arg @ref LL_TIM_OCMODE_INACTIVE + * @arg @ref LL_TIM_OCMODE_TOGGLE + * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE + * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE + * @arg @ref LL_TIM_OCMODE_PWM1 + * @arg @ref LL_TIM_OCMODE_PWM2 + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetMode(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return (READ_BIT(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel])) >> SHIFT_TAB_OCxx[iChannel]); +} + +/** + * @brief Set the polarity of an output channel. + * @rmtoll CCER CC1P LL_TIM_OC_SetPolarity\n + * CCER CC1NP LL_TIM_OC_SetPolarity\n + * CCER CC2P LL_TIM_OC_SetPolarity\n + * CCER CC2NP LL_TIM_OC_SetPolarity\n + * CCER CC3P LL_TIM_OC_SetPolarity\n + * CCER CC3NP LL_TIM_OC_SetPolarity\n + * CCER CC4P LL_TIM_OC_SetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_TIM_OCPOLARITY_HIGH + * @arg @ref LL_TIM_OCPOLARITY_LOW + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Polarity) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), Polarity << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Get the polarity of an output channel. + * @rmtoll CCER CC1P LL_TIM_OC_GetPolarity\n + * CCER CC1NP LL_TIM_OC_GetPolarity\n + * CCER CC2P LL_TIM_OC_GetPolarity\n + * CCER CC2NP LL_TIM_OC_GetPolarity\n + * CCER CC3P LL_TIM_OC_GetPolarity\n + * CCER CC3NP LL_TIM_OC_GetPolarity\n + * CCER CC4P LL_TIM_OC_GetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_OCPOLARITY_HIGH + * @arg @ref LL_TIM_OCPOLARITY_LOW + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetPolarity(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + return (READ_BIT(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel])) >> SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Set the IDLE state of an output channel + * @note This function is significant only for the timer instances + * supporting the break feature. Macro IS_TIM_BREAK_INSTANCE(TIMx) + * can be used to check whether or not a timer instance provides + * a break input. + * @rmtoll CR2 OIS1 LL_TIM_OC_SetIdleState\n + * CR2 OIS1N LL_TIM_OC_SetIdleState\n + * CR2 OIS2 LL_TIM_OC_SetIdleState\n + * CR2 OIS2N LL_TIM_OC_SetIdleState\n + * CR2 OIS3 LL_TIM_OC_SetIdleState\n + * CR2 OIS3N LL_TIM_OC_SetIdleState\n + * CR2 OIS4 LL_TIM_OC_SetIdleState + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param IdleState This parameter can be one of the following values: + * @arg @ref LL_TIM_OCIDLESTATE_LOW + * @arg @ref LL_TIM_OCIDLESTATE_HIGH + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetIdleState(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t IdleState) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]), IdleState << SHIFT_TAB_OISx[iChannel]); +} + +/** + * @brief Get the IDLE state of an output channel + * @rmtoll CR2 OIS1 LL_TIM_OC_GetIdleState\n + * CR2 OIS1N LL_TIM_OC_GetIdleState\n + * CR2 OIS2 LL_TIM_OC_GetIdleState\n + * CR2 OIS2N LL_TIM_OC_GetIdleState\n + * CR2 OIS3 LL_TIM_OC_GetIdleState\n + * CR2 OIS3N LL_TIM_OC_GetIdleState\n + * CR2 OIS4 LL_TIM_OC_GetIdleState + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_OCIDLESTATE_LOW + * @arg @ref LL_TIM_OCIDLESTATE_HIGH + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetIdleState(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + return (READ_BIT(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel])) >> SHIFT_TAB_OISx[iChannel]); +} + +/** + * @brief Enable fast mode for the output channel. + * @note Acts only if the channel is configured in PWM1 or PWM2 mode. + * @rmtoll CCMR1 OC1FE LL_TIM_OC_EnableFast\n + * CCMR1 OC2FE LL_TIM_OC_EnableFast\n + * CCMR2 OC3FE LL_TIM_OC_EnableFast\n + * CCMR2 OC4FE LL_TIM_OC_EnableFast + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_EnableFast(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + SET_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel])); + +} + +/** + * @brief Disable fast mode for the output channel. + * @rmtoll CCMR1 OC1FE LL_TIM_OC_DisableFast\n + * CCMR1 OC2FE LL_TIM_OC_DisableFast\n + * CCMR2 OC3FE LL_TIM_OC_DisableFast\n + * CCMR2 OC4FE LL_TIM_OC_DisableFast + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_DisableFast(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel])); + +} + +/** + * @brief Indicates whether fast mode is enabled for the output channel. + * @rmtoll CCMR1 OC1FE LL_TIM_OC_IsEnabledFast\n + * CCMR1 OC2FE LL_TIM_OC_IsEnabledFast\n + * CCMR2 OC3FE LL_TIM_OC_IsEnabledFast\n + * CCMR2 OC4FE LL_TIM_OC_IsEnabledFast\n + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledFast(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint32_t bitfield = TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel]; + return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); +} + +/** + * @brief Enable compare register (TIMx_CCRx) preload for the output channel. + * @rmtoll CCMR1 OC1PE LL_TIM_OC_EnablePreload\n + * CCMR1 OC2PE LL_TIM_OC_EnablePreload\n + * CCMR2 OC3PE LL_TIM_OC_EnablePreload\n + * CCMR2 OC4PE LL_TIM_OC_EnablePreload + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_EnablePreload(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + SET_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Disable compare register (TIMx_CCRx) preload for the output channel. + * @rmtoll CCMR1 OC1PE LL_TIM_OC_DisablePreload\n + * CCMR1 OC2PE LL_TIM_OC_DisablePreload\n + * CCMR2 OC3PE LL_TIM_OC_DisablePreload\n + * CCMR2 OC4PE LL_TIM_OC_DisablePreload + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_DisablePreload(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Indicates whether compare register (TIMx_CCRx) preload is enabled for the output channel. + * @rmtoll CCMR1 OC1PE LL_TIM_OC_IsEnabledPreload\n + * CCMR1 OC2PE LL_TIM_OC_IsEnabledPreload\n + * CCMR2 OC3PE LL_TIM_OC_IsEnabledPreload\n + * CCMR2 OC4PE LL_TIM_OC_IsEnabledPreload\n + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledPreload(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint32_t bitfield = TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel]; + return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); +} + +/** + * @brief Enable clearing the output channel on an external event. + * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode. + * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * or not a timer instance can clear the OCxREF signal on an external event. + * @rmtoll CCMR1 OC1CE LL_TIM_OC_EnableClear\n + * CCMR1 OC2CE LL_TIM_OC_EnableClear\n + * CCMR2 OC3CE LL_TIM_OC_EnableClear\n + * CCMR2 OC4CE LL_TIM_OC_EnableClear + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_EnableClear(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + SET_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Disable clearing the output channel on an external event. + * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * or not a timer instance can clear the OCxREF signal on an external event. + * @rmtoll CCMR1 OC1CE LL_TIM_OC_DisableClear\n + * CCMR1 OC2CE LL_TIM_OC_DisableClear\n + * CCMR2 OC3CE LL_TIM_OC_DisableClear\n + * CCMR2 OC4CE LL_TIM_OC_DisableClear + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_DisableClear(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Indicates clearing the output channel on an external event is enabled for the output channel. + * @note This function enables clearing the output channel on an external event. + * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode. + * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * or not a timer instance can clear the OCxREF signal on an external event. + * @rmtoll CCMR1 OC1CE LL_TIM_OC_IsEnabledClear\n + * CCMR1 OC2CE LL_TIM_OC_IsEnabledClear\n + * CCMR2 OC3CE LL_TIM_OC_IsEnabledClear\n + * CCMR2 OC4CE LL_TIM_OC_IsEnabledClear\n + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledClear(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint32_t bitfield = TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel]; + return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); +} + +/** + * @brief Set the dead-time delay (delay inserted between the rising edge of the OCxREF signal and the rising edge of + * the Ocx and OCxN signals). + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * dead-time insertion feature is supported by a timer instance. + * @note Helper macro @ref __LL_TIM_CALC_DEADTIME can be used to calculate the DeadTime parameter + * @rmtoll BDTR DTG LL_TIM_OC_SetDeadTime + * @param TIMx Timer instance + * @param DeadTime between Min_Data=0 and Max_Data=255 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetDeadTime(TIM_TypeDef *TIMx, uint32_t DeadTime) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_DTG, DeadTime); +} + +/** + * @brief Set compare value for output channel 1 (TIMx_CCR1). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * output channel 1 is supported by a timer instance. + * @rmtoll CCR1 CCR1 LL_TIM_OC_SetCompareCH1 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH1(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR1, CompareValue); +} + +/** + * @brief Set compare value for output channel 2 (TIMx_CCR2). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * output channel 2 is supported by a timer instance. + * @rmtoll CCR2 CCR2 LL_TIM_OC_SetCompareCH2 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH2(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR2, CompareValue); +} + +/** + * @brief Set compare value for output channel 3 (TIMx_CCR3). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * output channel is supported by a timer instance. + * @rmtoll CCR3 CCR3 LL_TIM_OC_SetCompareCH3 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH3(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR3, CompareValue); +} + +/** + * @brief Set compare value for output channel 4 (TIMx_CCR4). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * output channel 4 is supported by a timer instance. + * @rmtoll CCR4 CCR4 LL_TIM_OC_SetCompareCH4 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH4(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR4, CompareValue); +} + +/** + * @brief Get compare value (TIMx_CCR1) set for output channel 1. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * output channel 1 is supported by a timer instance. + * @rmtoll CCR1 CCR1 LL_TIM_OC_GetCompareCH1 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH1(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR1)); +} + +/** + * @brief Get compare value (TIMx_CCR2) set for output channel 2. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * output channel 2 is supported by a timer instance. + * @rmtoll CCR2 CCR2 LL_TIM_OC_GetCompareCH2 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH2(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR2)); +} + +/** + * @brief Get compare value (TIMx_CCR3) set for output channel 3. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * output channel 3 is supported by a timer instance. + * @rmtoll CCR3 CCR3 LL_TIM_OC_GetCompareCH3 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH3(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR3)); +} + +/** + * @brief Get compare value (TIMx_CCR4) set for output channel 4. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * output channel 4 is supported by a timer instance. + * @rmtoll CCR4 CCR4 LL_TIM_OC_GetCompareCH4 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH4(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR4)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Input_Channel Input channel configuration + * @{ + */ +/** + * @brief Configure input channel. + * @rmtoll CCMR1 CC1S LL_TIM_IC_Config\n + * CCMR1 IC1PSC LL_TIM_IC_Config\n + * CCMR1 IC1F LL_TIM_IC_Config\n + * CCMR1 CC2S LL_TIM_IC_Config\n + * CCMR1 IC2PSC LL_TIM_IC_Config\n + * CCMR1 IC2F LL_TIM_IC_Config\n + * CCMR2 CC3S LL_TIM_IC_Config\n + * CCMR2 IC3PSC LL_TIM_IC_Config\n + * CCMR2 IC3F LL_TIM_IC_Config\n + * CCMR2 CC4S LL_TIM_IC_Config\n + * CCMR2 IC4PSC LL_TIM_IC_Config\n + * CCMR2 IC4F LL_TIM_IC_Config\n + * CCER CC1P LL_TIM_IC_Config\n + * CCER CC1NP LL_TIM_IC_Config\n + * CCER CC2P LL_TIM_IC_Config\n + * CCER CC2NP LL_TIM_IC_Config\n + * CCER CC3P LL_TIM_IC_Config\n + * CCER CC3NP LL_TIM_IC_Config\n + * CCER CC4P LL_TIM_IC_Config\n + * CCER CC4NP LL_TIM_IC_Config + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI or @ref LL_TIM_ACTIVEINPUT_INDIRECTTI or @ref LL_TIM_ACTIVEINPUT_TRC + * @arg @ref LL_TIM_ICPSC_DIV1 or ... or @ref LL_TIM_ICPSC_DIV8 + * @arg @ref LL_TIM_IC_FILTER_FDIV1 or ... or @ref LL_TIM_IC_FILTER_FDIV32_N8 + * @arg @ref LL_TIM_IC_POLARITY_RISING or @ref LL_TIM_IC_POLARITY_FALLING or @ref LL_TIM_IC_POLARITY_BOTHEDGE + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_Config(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), + ((Configuration >> 16U) & (TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S)) \ + << SHIFT_TAB_ICxx[iChannel]); + MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]), + (Configuration & (TIM_CCER_CC1NP | TIM_CCER_CC1P)) << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Set the active input. + * @rmtoll CCMR1 CC1S LL_TIM_IC_SetActiveInput\n + * CCMR1 CC2S LL_TIM_IC_SetActiveInput\n + * CCMR2 CC3S LL_TIM_IC_SetActiveInput\n + * CCMR2 CC4S LL_TIM_IC_SetActiveInput + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICActiveInput This parameter can be one of the following values: + * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_TRC + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICActiveInput) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), (ICActiveInput >> 16U) << SHIFT_TAB_ICxx[iChannel]); +} + +/** + * @brief Get the current active input. + * @rmtoll CCMR1 CC1S LL_TIM_IC_GetActiveInput\n + * CCMR1 CC2S LL_TIM_IC_GetActiveInput\n + * CCMR2 CC3S LL_TIM_IC_GetActiveInput\n + * CCMR2 CC4S LL_TIM_IC_GetActiveInput + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_TRC + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return ((READ_BIT(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); +} + +/** + * @brief Set the prescaler of input channel. + * @rmtoll CCMR1 IC1PSC LL_TIM_IC_SetPrescaler\n + * CCMR1 IC2PSC LL_TIM_IC_SetPrescaler\n + * CCMR2 IC3PSC LL_TIM_IC_SetPrescaler\n + * CCMR2 IC4PSC LL_TIM_IC_SetPrescaler + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICPrescaler This parameter can be one of the following values: + * @arg @ref LL_TIM_ICPSC_DIV1 + * @arg @ref LL_TIM_ICPSC_DIV2 + * @arg @ref LL_TIM_ICPSC_DIV4 + * @arg @ref LL_TIM_ICPSC_DIV8 + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPrescaler) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel]), (ICPrescaler >> 16U) << SHIFT_TAB_ICxx[iChannel]); +} + +/** + * @brief Get the current prescaler value acting on an input channel. + * @rmtoll CCMR1 IC1PSC LL_TIM_IC_GetPrescaler\n + * CCMR1 IC2PSC LL_TIM_IC_GetPrescaler\n + * CCMR2 IC3PSC LL_TIM_IC_GetPrescaler\n + * CCMR2 IC4PSC LL_TIM_IC_GetPrescaler + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_ICPSC_DIV1 + * @arg @ref LL_TIM_ICPSC_DIV2 + * @arg @ref LL_TIM_ICPSC_DIV4 + * @arg @ref LL_TIM_ICPSC_DIV8 + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); +} + +/** + * @brief Set the input filter duration. + * @rmtoll CCMR1 IC1F LL_TIM_IC_SetFilter\n + * CCMR1 IC2F LL_TIM_IC_SetFilter\n + * CCMR2 IC3F LL_TIM_IC_SetFilter\n + * CCMR2 IC4F LL_TIM_IC_SetFilter + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICFilter This parameter can be one of the following values: + * @arg @ref LL_TIM_IC_FILTER_FDIV1 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8 + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetFilter(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICFilter) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel]), (ICFilter >> 16U) << SHIFT_TAB_ICxx[iChannel]); +} + +/** + * @brief Get the input filter duration. + * @rmtoll CCMR1 IC1F LL_TIM_IC_GetFilter\n + * CCMR1 IC2F LL_TIM_IC_GetFilter\n + * CCMR2 IC3F LL_TIM_IC_GetFilter\n + * CCMR2 IC4F LL_TIM_IC_GetFilter + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_IC_FILTER_FDIV1 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8 + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetFilter(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); +} + +/** + * @brief Set the input channel polarity. + * @rmtoll CCER CC1P LL_TIM_IC_SetPolarity\n + * CCER CC1NP LL_TIM_IC_SetPolarity\n + * CCER CC2P LL_TIM_IC_SetPolarity\n + * CCER CC2NP LL_TIM_IC_SetPolarity\n + * CCER CC3P LL_TIM_IC_SetPolarity\n + * CCER CC3NP LL_TIM_IC_SetPolarity\n + * CCER CC4P LL_TIM_IC_SetPolarity\n + * CCER CC4NP LL_TIM_IC_SetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICPolarity This parameter can be one of the following values: + * @arg @ref LL_TIM_IC_POLARITY_RISING + * @arg @ref LL_TIM_IC_POLARITY_FALLING + * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPolarity) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]), + ICPolarity << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Get the current input channel polarity. + * @rmtoll CCER CC1P LL_TIM_IC_GetPolarity\n + * CCER CC1NP LL_TIM_IC_GetPolarity\n + * CCER CC2P LL_TIM_IC_GetPolarity\n + * CCER CC2NP LL_TIM_IC_GetPolarity\n + * CCER CC3P LL_TIM_IC_GetPolarity\n + * CCER CC3NP LL_TIM_IC_GetPolarity\n + * CCER CC4P LL_TIM_IC_GetPolarity\n + * CCER CC4NP LL_TIM_IC_GetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_IC_POLARITY_RISING + * @arg @ref LL_TIM_IC_POLARITY_FALLING + * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetPolarity(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + return (READ_BIT(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel])) >> + SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Connect the TIMx_CH1, CH2 and CH3 pins to the TI1 input (XOR combination). + * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an XOR input. + * @rmtoll CR2 TI1S LL_TIM_IC_EnableXORCombination + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_EnableXORCombination(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR2, TIM_CR2_TI1S); +} + +/** + * @brief Disconnect the TIMx_CH1, CH2 and CH3 pins from the TI1 input. + * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an XOR input. + * @rmtoll CR2 TI1S LL_TIM_IC_DisableXORCombination + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_DisableXORCombination(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR2, TIM_CR2_TI1S); +} + +/** + * @brief Indicates whether the TIMx_CH1, CH2 and CH3 pins are connectected to the TI1 input. + * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an XOR input. + * @rmtoll CR2 TI1S LL_TIM_IC_IsEnabledXORCombination + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IC_IsEnabledXORCombination(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR2, TIM_CR2_TI1S) == (TIM_CR2_TI1S)) ? 1UL : 0UL); +} + +/** + * @brief Get captured value for input channel 1. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * input channel 1 is supported by a timer instance. + * @rmtoll CCR1 CCR1 LL_TIM_IC_GetCaptureCH1 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH1(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR1)); +} + +/** + * @brief Get captured value for input channel 2. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * input channel 2 is supported by a timer instance. + * @rmtoll CCR2 CCR2 LL_TIM_IC_GetCaptureCH2 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH2(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR2)); +} + +/** + * @brief Get captured value for input channel 3. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * input channel 3 is supported by a timer instance. + * @rmtoll CCR3 CCR3 LL_TIM_IC_GetCaptureCH3 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH3(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR3)); +} + +/** + * @brief Get captured value for input channel 4. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * input channel 4 is supported by a timer instance. + * @rmtoll CCR4 CCR4 LL_TIM_IC_GetCaptureCH4 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH4(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR4)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Clock_Selection Counter clock selection + * @{ + */ +/** + * @brief Enable external clock mode 2. + * @note When external clock mode 2 is enabled the counter is clocked by any active edge on the ETRF signal. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR ECE LL_TIM_EnableExternalClock + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableExternalClock(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->SMCR, TIM_SMCR_ECE); +} + +/** + * @brief Disable external clock mode 2. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR ECE LL_TIM_DisableExternalClock + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableExternalClock(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->SMCR, TIM_SMCR_ECE); +} + +/** + * @brief Indicate whether external clock mode 2 is enabled. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR ECE LL_TIM_IsEnabledExternalClock + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledExternalClock(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SMCR, TIM_SMCR_ECE) == (TIM_SMCR_ECE)) ? 1UL : 0UL); +} + +/** + * @brief Set the clock source of the counter clock. + * @note when selected clock source is external clock mode 1, the timer input + * the external clock is applied is selected by calling the @ref LL_TIM_SetTriggerInput() + * function. This timer input must be configured by calling + * the @ref LL_TIM_IC_Config() function. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode1. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR SMS LL_TIM_SetClockSource\n + * SMCR ECE LL_TIM_SetClockSource + * @param TIMx Timer instance + * @param ClockSource This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKSOURCE_INTERNAL + * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE1 + * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE2 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetClockSource(TIM_TypeDef *TIMx, uint32_t ClockSource) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS | TIM_SMCR_ECE, ClockSource); +} + +/** + * @brief Set the encoder interface mode. + * @note Macro IS_TIM_ENCODER_INTERFACE_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports the encoder mode. + * @rmtoll SMCR SMS LL_TIM_SetEncoderMode + * @param TIMx Timer instance + * @param EncoderMode This parameter can be one of the following values: + * @arg @ref LL_TIM_ENCODERMODE_X2_TI1 + * @arg @ref LL_TIM_ENCODERMODE_X2_TI2 + * @arg @ref LL_TIM_ENCODERMODE_X4_TI12 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetEncoderMode(TIM_TypeDef *TIMx, uint32_t EncoderMode) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, EncoderMode); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Timer_Synchronization Timer synchronisation configuration + * @{ + */ +/** + * @brief Set the trigger output (TRGO) used for timer synchronization . + * @note Macro IS_TIM_MASTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance can operate as a master timer. + * @rmtoll CR2 MMS LL_TIM_SetTriggerOutput + * @param TIMx Timer instance + * @param TimerSynchronization This parameter can be one of the following values: + * @arg @ref LL_TIM_TRGO_RESET + * @arg @ref LL_TIM_TRGO_ENABLE + * @arg @ref LL_TIM_TRGO_UPDATE + * @arg @ref LL_TIM_TRGO_CC1IF + * @arg @ref LL_TIM_TRGO_OC1REF + * @arg @ref LL_TIM_TRGO_OC2REF + * @arg @ref LL_TIM_TRGO_OC3REF + * @arg @ref LL_TIM_TRGO_OC4REF + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetTriggerOutput(TIM_TypeDef *TIMx, uint32_t TimerSynchronization) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_MMS, TimerSynchronization); +} + +/** + * @brief Set the synchronization mode of a slave timer. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR SMS LL_TIM_SetSlaveMode + * @param TIMx Timer instance + * @param SlaveMode This parameter can be one of the following values: + * @arg @ref LL_TIM_SLAVEMODE_DISABLED + * @arg @ref LL_TIM_SLAVEMODE_RESET + * @arg @ref LL_TIM_SLAVEMODE_GATED + * @arg @ref LL_TIM_SLAVEMODE_TRIGGER + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetSlaveMode(TIM_TypeDef *TIMx, uint32_t SlaveMode) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, SlaveMode); +} + +/** + * @brief Set the selects the trigger input to be used to synchronize the counter. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR TS LL_TIM_SetTriggerInput + * @param TIMx Timer instance + * @param TriggerInput This parameter can be one of the following values: + * @arg @ref LL_TIM_TS_ITR0 + * @arg @ref LL_TIM_TS_ITR1 + * @arg @ref LL_TIM_TS_ITR2 + * @arg @ref LL_TIM_TS_ITR3 + * @arg @ref LL_TIM_TS_TI1F_ED + * @arg @ref LL_TIM_TS_TI1FP1 + * @arg @ref LL_TIM_TS_TI2FP2 + * @arg @ref LL_TIM_TS_ETRF + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetTriggerInput(TIM_TypeDef *TIMx, uint32_t TriggerInput) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_TS, TriggerInput); +} + +/** + * @brief Enable the Master/Slave mode. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR MSM LL_TIM_EnableMasterSlaveMode + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableMasterSlaveMode(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->SMCR, TIM_SMCR_MSM); +} + +/** + * @brief Disable the Master/Slave mode. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR MSM LL_TIM_DisableMasterSlaveMode + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableMasterSlaveMode(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->SMCR, TIM_SMCR_MSM); +} + +/** + * @brief Indicates whether the Master/Slave mode is enabled. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR MSM LL_TIM_IsEnabledMasterSlaveMode + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledMasterSlaveMode(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SMCR, TIM_SMCR_MSM) == (TIM_SMCR_MSM)) ? 1UL : 0UL); +} + +/** + * @brief Configure the external trigger (ETR) input. + * @note Macro IS_TIM_ETR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an external trigger input. + * @rmtoll SMCR ETP LL_TIM_ConfigETR\n + * SMCR ETPS LL_TIM_ConfigETR\n + * SMCR ETF LL_TIM_ConfigETR + * @param TIMx Timer instance + * @param ETRPolarity This parameter can be one of the following values: + * @arg @ref LL_TIM_ETR_POLARITY_NONINVERTED + * @arg @ref LL_TIM_ETR_POLARITY_INVERTED + * @param ETRPrescaler This parameter can be one of the following values: + * @arg @ref LL_TIM_ETR_PRESCALER_DIV1 + * @arg @ref LL_TIM_ETR_PRESCALER_DIV2 + * @arg @ref LL_TIM_ETR_PRESCALER_DIV4 + * @arg @ref LL_TIM_ETR_PRESCALER_DIV8 + * @param ETRFilter This parameter can be one of the following values: + * @arg @ref LL_TIM_ETR_FILTER_FDIV1 + * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N8 + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigETR(TIM_TypeDef *TIMx, uint32_t ETRPolarity, uint32_t ETRPrescaler, + uint32_t ETRFilter) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_ETP | TIM_SMCR_ETPS | TIM_SMCR_ETF, ETRPolarity | ETRPrescaler | ETRFilter); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Break_Function Break function configuration + * @{ + */ +/** + * @brief Enable the break function. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR BKE LL_TIM_EnableBRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableBRK(TIM_TypeDef *TIMx) +{ + __IO uint32_t tmpreg; + SET_BIT(TIMx->BDTR, TIM_BDTR_BKE); + /* Note: Any write operation to this bit takes a delay of 1 APB clock cycle to become effective. */ + tmpreg = READ_REG(TIMx->BDTR); + (void)(tmpreg); +} + +/** + * @brief Disable the break function. + * @rmtoll BDTR BKE LL_TIM_DisableBRK + * @param TIMx Timer instance + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableBRK(TIM_TypeDef *TIMx) +{ + __IO uint32_t tmpreg; + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_BKE); + /* Note: Any write operation to this bit takes a delay of 1 APB clock cycle to become effective. */ + tmpreg = READ_REG(TIMx->BDTR); + (void)(tmpreg); +} + +/** + * @brief Configure the break input. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR BKP LL_TIM_ConfigBRK + * @param TIMx Timer instance + * @param BreakPolarity This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK_POLARITY_LOW + * @arg @ref LL_TIM_BREAK_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigBRK(TIM_TypeDef *TIMx, uint32_t BreakPolarity) +{ + __IO uint32_t tmpreg; + MODIFY_REG(TIMx->BDTR, TIM_BDTR_BKP, BreakPolarity); + /* Note: Any write operation to BKP bit takes a delay of 1 APB clock cycle to become effective. */ + tmpreg = READ_REG(TIMx->BDTR); + (void)(tmpreg); +} + +/** + * @brief Select the outputs off state (enabled v.s. disabled) in Idle and Run modes. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR OSSI LL_TIM_SetOffStates\n + * BDTR OSSR LL_TIM_SetOffStates + * @param TIMx Timer instance + * @param OffStateIdle This parameter can be one of the following values: + * @arg @ref LL_TIM_OSSI_DISABLE + * @arg @ref LL_TIM_OSSI_ENABLE + * @param OffStateRun This parameter can be one of the following values: + * @arg @ref LL_TIM_OSSR_DISABLE + * @arg @ref LL_TIM_OSSR_ENABLE + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetOffStates(TIM_TypeDef *TIMx, uint32_t OffStateIdle, uint32_t OffStateRun) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_OSSI | TIM_BDTR_OSSR, OffStateIdle | OffStateRun); +} + +/** + * @brief Enable automatic output (MOE can be set by software or automatically when a break input is active). + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR AOE LL_TIM_EnableAutomaticOutput + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableAutomaticOutput(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_AOE); +} + +/** + * @brief Disable automatic output (MOE can be set only by software). + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR AOE LL_TIM_DisableAutomaticOutput + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableAutomaticOutput(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_AOE); +} + +/** + * @brief Indicate whether automatic output is enabled. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR AOE LL_TIM_IsEnabledAutomaticOutput + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledAutomaticOutput(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->BDTR, TIM_BDTR_AOE) == (TIM_BDTR_AOE)) ? 1UL : 0UL); +} + +/** + * @brief Enable the outputs (set the MOE bit in TIMx_BDTR register). + * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by + * software and is reset in case of break or break2 event + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR MOE LL_TIM_EnableAllOutputs + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableAllOutputs(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_MOE); +} + +/** + * @brief Disable the outputs (reset the MOE bit in TIMx_BDTR register). + * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by + * software and is reset in case of break or break2 event. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR MOE LL_TIM_DisableAllOutputs + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableAllOutputs(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_MOE); +} + +/** + * @brief Indicates whether outputs are enabled. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR MOE LL_TIM_IsEnabledAllOutputs + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledAllOutputs(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->BDTR, TIM_BDTR_MOE) == (TIM_BDTR_MOE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_DMA_Burst_Mode DMA burst mode configuration + * @{ + */ +/** + * @brief Configures the timer DMA burst feature. + * @note Macro IS_TIM_DMABURST_INSTANCE(TIMx) can be used to check whether or + * not a timer instance supports the DMA burst mode. + * @rmtoll DCR DBL LL_TIM_ConfigDMABurst\n + * DCR DBA LL_TIM_ConfigDMABurst + * @param TIMx Timer instance + * @param DMABurstBaseAddress This parameter can be one of the following values: + * @arg @ref LL_TIM_DMABURST_BASEADDR_CR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_SMCR + * @arg @ref LL_TIM_DMABURST_BASEADDR_DIER + * @arg @ref LL_TIM_DMABURST_BASEADDR_SR + * @arg @ref LL_TIM_DMABURST_BASEADDR_EGR + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCER + * @arg @ref LL_TIM_DMABURST_BASEADDR_CNT + * @arg @ref LL_TIM_DMABURST_BASEADDR_PSC + * @arg @ref LL_TIM_DMABURST_BASEADDR_ARR + * @arg @ref LL_TIM_DMABURST_BASEADDR_RCR + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR3 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR4 + * @arg @ref LL_TIM_DMABURST_BASEADDR_BDTR + * @param DMABurstLength This parameter can be one of the following values: + * @arg @ref LL_TIM_DMABURST_LENGTH_1TRANSFER + * @arg @ref LL_TIM_DMABURST_LENGTH_2TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_3TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_4TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_5TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_6TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_7TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_8TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_9TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_10TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_11TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_12TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_13TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_14TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_15TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_16TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_17TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_18TRANSFERS + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigDMABurst(TIM_TypeDef *TIMx, uint32_t DMABurstBaseAddress, uint32_t DMABurstLength) +{ + MODIFY_REG(TIMx->DCR, (TIM_DCR_DBL | TIM_DCR_DBA), (DMABurstBaseAddress | DMABurstLength)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Timer_Inputs_Remapping Timer input remapping + * @{ + */ +/** + * @brief Remap TIM inputs (input channel, internal/external triggers). + * @note Macro IS_TIM_REMAP_INSTANCE(TIMx) can be used to check whether or not + * a some timer inputs can be remapped. + * @rmtoll TIM1_OR ITR2_RMP LL_TIM_SetRemap\n + * TIM2_OR ITR1_RMP LL_TIM_SetRemap\n + * TIM5_OR ITR1_RMP LL_TIM_SetRemap\n + * TIM5_OR TI4_RMP LL_TIM_SetRemap\n + * TIM9_OR ITR1_RMP LL_TIM_SetRemap\n + * TIM11_OR TI1_RMP LL_TIM_SetRemap\n + * LPTIM1_OR OR LL_TIM_SetRemap + * @param TIMx Timer instance + * @param Remap Remap param depends on the TIMx. Description available only + * in CHM version of the User Manual (not in .pdf). + * Otherwise see Reference Manual description of OR registers. + * + * Below description summarizes "Timer Instance" and "Remap" param combinations: + * + * TIM1: one of the following values + * + * ITR2_RMP can be one of the following values + * @arg @ref LL_TIM_TIM1_ITR2_RMP_TIM3_TRGO (*) + * @arg @ref LL_TIM_TIM1_ITR2_RMP_LPTIM (*) + * + * TIM2: one of the following values + * + * ITR1_RMP can be one of the following values + * @arg @ref LL_TIM_TIM2_ITR1_RMP_TIM8_TRGO + * @arg @ref LL_TIM_TIM2_ITR1_RMP_OTG_FS_SOF + * @arg @ref LL_TIM_TIM2_ITR1_RMP_OTG_HS_SOF + * + * TIM5: one of the following values + * + * @arg @ref LL_TIM_TIM5_TI4_RMP_GPIO + * @arg @ref LL_TIM_TIM5_TI4_RMP_LSI + * @arg @ref LL_TIM_TIM5_TI4_RMP_LSE + * @arg @ref LL_TIM_TIM5_TI4_RMP_RTC + * @arg @ref LL_TIM_TIM5_ITR1_RMP_TIM3_TRGO (*) + * @arg @ref LL_TIM_TIM5_ITR1_RMP_LPTIM (*) + * + * TIM9: one of the following values + * + * ITR1_RMP can be one of the following values + * @arg @ref LL_TIM_TIM9_ITR1_RMP_TIM3_TRGO (*) + * @arg @ref LL_TIM_TIM9_ITR1_RMP_LPTIM (*) + * + * TIM11: one of the following values + * + * @arg @ref LL_TIM_TIM11_TI1_RMP_GPIO + * @arg @ref LL_TIM_TIM11_TI1_RMP_GPIO1 (*) + * @arg @ref LL_TIM_TIM11_TI1_RMP_HSE_RTC + * @arg @ref LL_TIM_TIM11_TI1_RMP_GPIO2 + * @arg @ref LL_TIM_TIM11_TI1_RMP_SPDIFRX (*) + * + * (*) Value not defined in all devices. \n + * + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetRemap(TIM_TypeDef *TIMx, uint32_t Remap) +{ +#if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM9_ITR1_RMP) + if ((Remap & LL_TIM_LPTIM_REMAP_MASK) == LL_TIM_LPTIM_REMAP_MASK) + { + /* Connect TIMx internal trigger to LPTIM1 output */ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN); + MODIFY_REG(LPTIM1->OR, + (LPTIM_OR_TIM1_ITR2_RMP | LPTIM_OR_TIM5_ITR1_RMP | LPTIM_OR_TIM9_ITR1_RMP), + Remap & ~(LL_TIM_LPTIM_REMAP_MASK)); + } + else + { + MODIFY_REG(TIMx->OR, (Remap >> TIMx_OR_RMP_SHIFT), (Remap & TIMx_OR_RMP_MASK)); + } +#else + MODIFY_REG(TIMx->OR, (Remap >> TIMx_OR_RMP_SHIFT), (Remap & TIMx_OR_RMP_MASK)); +#endif /* LPTIM_OR_TIM1_ITR2_RMP && LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM9_ITR1_RMP */ +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_FLAG_Management FLAG-Management + * @{ + */ +/** + * @brief Clear the update interrupt flag (UIF). + * @rmtoll SR UIF LL_TIM_ClearFlag_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_UPDATE(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_UIF)); +} + +/** + * @brief Indicate whether update interrupt flag (UIF) is set (update interrupt is pending). + * @rmtoll SR UIF LL_TIM_IsActiveFlag_UPDATE + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_UPDATE(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_UIF) == (TIM_SR_UIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 1 interrupt flag (CC1F). + * @rmtoll SR CC1IF LL_TIM_ClearFlag_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC1(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC1IF)); +} + +/** + * @brief Indicate whether Capture/Compare 1 interrupt flag (CC1F) is set (Capture/Compare 1 interrupt is pending). + * @rmtoll SR CC1IF LL_TIM_IsActiveFlag_CC1 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC1IF) == (TIM_SR_CC1IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 2 interrupt flag (CC2F). + * @rmtoll SR CC2IF LL_TIM_ClearFlag_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC2(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC2IF)); +} + +/** + * @brief Indicate whether Capture/Compare 2 interrupt flag (CC2F) is set (Capture/Compare 2 interrupt is pending). + * @rmtoll SR CC2IF LL_TIM_IsActiveFlag_CC2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC2IF) == (TIM_SR_CC2IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 3 interrupt flag (CC3F). + * @rmtoll SR CC3IF LL_TIM_ClearFlag_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC3(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC3IF)); +} + +/** + * @brief Indicate whether Capture/Compare 3 interrupt flag (CC3F) is set (Capture/Compare 3 interrupt is pending). + * @rmtoll SR CC3IF LL_TIM_IsActiveFlag_CC3 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC3IF) == (TIM_SR_CC3IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 4 interrupt flag (CC4F). + * @rmtoll SR CC4IF LL_TIM_ClearFlag_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC4(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC4IF)); +} + +/** + * @brief Indicate whether Capture/Compare 4 interrupt flag (CC4F) is set (Capture/Compare 4 interrupt is pending). + * @rmtoll SR CC4IF LL_TIM_IsActiveFlag_CC4 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC4IF) == (TIM_SR_CC4IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the commutation interrupt flag (COMIF). + * @rmtoll SR COMIF LL_TIM_ClearFlag_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_COM(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_COMIF)); +} + +/** + * @brief Indicate whether commutation interrupt flag (COMIF) is set (commutation interrupt is pending). + * @rmtoll SR COMIF LL_TIM_IsActiveFlag_COM + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_COM(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_COMIF) == (TIM_SR_COMIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the trigger interrupt flag (TIF). + * @rmtoll SR TIF LL_TIM_ClearFlag_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_TRIG(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_TIF)); +} + +/** + * @brief Indicate whether trigger interrupt flag (TIF) is set (trigger interrupt is pending). + * @rmtoll SR TIF LL_TIM_IsActiveFlag_TRIG + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_TRIG(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_TIF) == (TIM_SR_TIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the break interrupt flag (BIF). + * @rmtoll SR BIF LL_TIM_ClearFlag_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_BRK(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_BIF)); +} + +/** + * @brief Indicate whether break interrupt flag (BIF) is set (break interrupt is pending). + * @rmtoll SR BIF LL_TIM_IsActiveFlag_BRK + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_BRK(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_BIF) == (TIM_SR_BIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 1 over-capture interrupt flag (CC1OF). + * @rmtoll SR CC1OF LL_TIM_ClearFlag_CC1OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC1OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC1OF)); +} + +/** + * @brief Indicate whether Capture/Compare 1 over-capture interrupt flag (CC1OF) is set + * (Capture/Compare 1 interrupt is pending). + * @rmtoll SR CC1OF LL_TIM_IsActiveFlag_CC1OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1OVR(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC1OF) == (TIM_SR_CC1OF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 2 over-capture interrupt flag (CC2OF). + * @rmtoll SR CC2OF LL_TIM_ClearFlag_CC2OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC2OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC2OF)); +} + +/** + * @brief Indicate whether Capture/Compare 2 over-capture interrupt flag (CC2OF) is set + * (Capture/Compare 2 over-capture interrupt is pending). + * @rmtoll SR CC2OF LL_TIM_IsActiveFlag_CC2OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2OVR(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC2OF) == (TIM_SR_CC2OF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 3 over-capture interrupt flag (CC3OF). + * @rmtoll SR CC3OF LL_TIM_ClearFlag_CC3OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC3OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC3OF)); +} + +/** + * @brief Indicate whether Capture/Compare 3 over-capture interrupt flag (CC3OF) is set + * (Capture/Compare 3 over-capture interrupt is pending). + * @rmtoll SR CC3OF LL_TIM_IsActiveFlag_CC3OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3OVR(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC3OF) == (TIM_SR_CC3OF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 4 over-capture interrupt flag (CC4OF). + * @rmtoll SR CC4OF LL_TIM_ClearFlag_CC4OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC4OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC4OF)); +} + +/** + * @brief Indicate whether Capture/Compare 4 over-capture interrupt flag (CC4OF) is set + * (Capture/Compare 4 over-capture interrupt is pending). + * @rmtoll SR CC4OF LL_TIM_IsActiveFlag_CC4OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4OVR(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC4OF) == (TIM_SR_CC4OF)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_IT_Management IT-Management + * @{ + */ +/** + * @brief Enable update interrupt (UIE). + * @rmtoll DIER UIE LL_TIM_EnableIT_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_UPDATE(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_UIE); +} + +/** + * @brief Disable update interrupt (UIE). + * @rmtoll DIER UIE LL_TIM_DisableIT_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_UPDATE(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_UIE); +} + +/** + * @brief Indicates whether the update interrupt (UIE) is enabled. + * @rmtoll DIER UIE LL_TIM_IsEnabledIT_UPDATE + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_UPDATE(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_UIE) == (TIM_DIER_UIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 1 interrupt (CC1IE). + * @rmtoll DIER CC1IE LL_TIM_EnableIT_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC1(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC1IE); +} + +/** + * @brief Disable capture/compare 1 interrupt (CC1IE). + * @rmtoll DIER CC1IE LL_TIM_DisableIT_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC1(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1IE); +} + +/** + * @brief Indicates whether the capture/compare 1 interrupt (CC1IE) is enabled. + * @rmtoll DIER CC1IE LL_TIM_IsEnabledIT_CC1 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC1(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC1IE) == (TIM_DIER_CC1IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 2 interrupt (CC2IE). + * @rmtoll DIER CC2IE LL_TIM_EnableIT_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC2IE); +} + +/** + * @brief Disable capture/compare 2 interrupt (CC2IE). + * @rmtoll DIER CC2IE LL_TIM_DisableIT_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC2(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2IE); +} + +/** + * @brief Indicates whether the capture/compare 2 interrupt (CC2IE) is enabled. + * @rmtoll DIER CC2IE LL_TIM_IsEnabledIT_CC2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC2(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC2IE) == (TIM_DIER_CC2IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 3 interrupt (CC3IE). + * @rmtoll DIER CC3IE LL_TIM_EnableIT_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC3(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC3IE); +} + +/** + * @brief Disable capture/compare 3 interrupt (CC3IE). + * @rmtoll DIER CC3IE LL_TIM_DisableIT_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC3(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3IE); +} + +/** + * @brief Indicates whether the capture/compare 3 interrupt (CC3IE) is enabled. + * @rmtoll DIER CC3IE LL_TIM_IsEnabledIT_CC3 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC3(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC3IE) == (TIM_DIER_CC3IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 4 interrupt (CC4IE). + * @rmtoll DIER CC4IE LL_TIM_EnableIT_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC4(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC4IE); +} + +/** + * @brief Disable capture/compare 4 interrupt (CC4IE). + * @rmtoll DIER CC4IE LL_TIM_DisableIT_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC4(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4IE); +} + +/** + * @brief Indicates whether the capture/compare 4 interrupt (CC4IE) is enabled. + * @rmtoll DIER CC4IE LL_TIM_IsEnabledIT_CC4 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC4(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC4IE) == (TIM_DIER_CC4IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable commutation interrupt (COMIE). + * @rmtoll DIER COMIE LL_TIM_EnableIT_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_COM(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_COMIE); +} + +/** + * @brief Disable commutation interrupt (COMIE). + * @rmtoll DIER COMIE LL_TIM_DisableIT_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_COM(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_COMIE); +} + +/** + * @brief Indicates whether the commutation interrupt (COMIE) is enabled. + * @rmtoll DIER COMIE LL_TIM_IsEnabledIT_COM + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_COM(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_COMIE) == (TIM_DIER_COMIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable trigger interrupt (TIE). + * @rmtoll DIER TIE LL_TIM_EnableIT_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_TRIG(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_TIE); +} + +/** + * @brief Disable trigger interrupt (TIE). + * @rmtoll DIER TIE LL_TIM_DisableIT_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_TRIG(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_TIE); +} + +/** + * @brief Indicates whether the trigger interrupt (TIE) is enabled. + * @rmtoll DIER TIE LL_TIM_IsEnabledIT_TRIG + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_TRIG(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_TIE) == (TIM_DIER_TIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable break interrupt (BIE). + * @rmtoll DIER BIE LL_TIM_EnableIT_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_BRK(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_BIE); +} + +/** + * @brief Disable break interrupt (BIE). + * @rmtoll DIER BIE LL_TIM_DisableIT_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_BRK(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_BIE); +} + +/** + * @brief Indicates whether the break interrupt (BIE) is enabled. + * @rmtoll DIER BIE LL_TIM_IsEnabledIT_BRK + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_BRK(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_BIE) == (TIM_DIER_BIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_DMA_Management DMA Management + * @{ + */ +/** + * @brief Enable update DMA request (UDE). + * @rmtoll DIER UDE LL_TIM_EnableDMAReq_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_UPDATE(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_UDE); +} + +/** + * @brief Disable update DMA request (UDE). + * @rmtoll DIER UDE LL_TIM_DisableDMAReq_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_UPDATE(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_UDE); +} + +/** + * @brief Indicates whether the update DMA request (UDE) is enabled. + * @rmtoll DIER UDE LL_TIM_IsEnabledDMAReq_UPDATE + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_UPDATE(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_UDE) == (TIM_DIER_UDE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 1 DMA request (CC1DE). + * @rmtoll DIER CC1DE LL_TIM_EnableDMAReq_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC1(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC1DE); +} + +/** + * @brief Disable capture/compare 1 DMA request (CC1DE). + * @rmtoll DIER CC1DE LL_TIM_DisableDMAReq_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC1(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1DE); +} + +/** + * @brief Indicates whether the capture/compare 1 DMA request (CC1DE) is enabled. + * @rmtoll DIER CC1DE LL_TIM_IsEnabledDMAReq_CC1 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC1(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC1DE) == (TIM_DIER_CC1DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 2 DMA request (CC2DE). + * @rmtoll DIER CC2DE LL_TIM_EnableDMAReq_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC2DE); +} + +/** + * @brief Disable capture/compare 2 DMA request (CC2DE). + * @rmtoll DIER CC2DE LL_TIM_DisableDMAReq_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC2(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2DE); +} + +/** + * @brief Indicates whether the capture/compare 2 DMA request (CC2DE) is enabled. + * @rmtoll DIER CC2DE LL_TIM_IsEnabledDMAReq_CC2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC2(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC2DE) == (TIM_DIER_CC2DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 3 DMA request (CC3DE). + * @rmtoll DIER CC3DE LL_TIM_EnableDMAReq_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC3(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC3DE); +} + +/** + * @brief Disable capture/compare 3 DMA request (CC3DE). + * @rmtoll DIER CC3DE LL_TIM_DisableDMAReq_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC3(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3DE); +} + +/** + * @brief Indicates whether the capture/compare 3 DMA request (CC3DE) is enabled. + * @rmtoll DIER CC3DE LL_TIM_IsEnabledDMAReq_CC3 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC3(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC3DE) == (TIM_DIER_CC3DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 4 DMA request (CC4DE). + * @rmtoll DIER CC4DE LL_TIM_EnableDMAReq_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC4(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC4DE); +} + +/** + * @brief Disable capture/compare 4 DMA request (CC4DE). + * @rmtoll DIER CC4DE LL_TIM_DisableDMAReq_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC4(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4DE); +} + +/** + * @brief Indicates whether the capture/compare 4 DMA request (CC4DE) is enabled. + * @rmtoll DIER CC4DE LL_TIM_IsEnabledDMAReq_CC4 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC4(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC4DE) == (TIM_DIER_CC4DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable commutation DMA request (COMDE). + * @rmtoll DIER COMDE LL_TIM_EnableDMAReq_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_COM(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_COMDE); +} + +/** + * @brief Disable commutation DMA request (COMDE). + * @rmtoll DIER COMDE LL_TIM_DisableDMAReq_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_COM(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_COMDE); +} + +/** + * @brief Indicates whether the commutation DMA request (COMDE) is enabled. + * @rmtoll DIER COMDE LL_TIM_IsEnabledDMAReq_COM + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_COM(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_COMDE) == (TIM_DIER_COMDE)) ? 1UL : 0UL); +} + +/** + * @brief Enable trigger interrupt (TDE). + * @rmtoll DIER TDE LL_TIM_EnableDMAReq_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_TRIG(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_TDE); +} + +/** + * @brief Disable trigger interrupt (TDE). + * @rmtoll DIER TDE LL_TIM_DisableDMAReq_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_TRIG(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_TDE); +} + +/** + * @brief Indicates whether the trigger interrupt (TDE) is enabled. + * @rmtoll DIER TDE LL_TIM_IsEnabledDMAReq_TRIG + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_TRIG(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_TDE) == (TIM_DIER_TDE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_EVENT_Management EVENT-Management + * @{ + */ +/** + * @brief Generate an update event. + * @rmtoll EGR UG LL_TIM_GenerateEvent_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_UPDATE(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_UG); +} + +/** + * @brief Generate Capture/Compare 1 event. + * @rmtoll EGR CC1G LL_TIM_GenerateEvent_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC1(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC1G); +} + +/** + * @brief Generate Capture/Compare 2 event. + * @rmtoll EGR CC2G LL_TIM_GenerateEvent_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC2G); +} + +/** + * @brief Generate Capture/Compare 3 event. + * @rmtoll EGR CC3G LL_TIM_GenerateEvent_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC3(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC3G); +} + +/** + * @brief Generate Capture/Compare 4 event. + * @rmtoll EGR CC4G LL_TIM_GenerateEvent_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC4(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC4G); +} + +/** + * @brief Generate commutation event. + * @rmtoll EGR COMG LL_TIM_GenerateEvent_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_COM(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_COMG); +} + +/** + * @brief Generate trigger event. + * @rmtoll EGR TG LL_TIM_GenerateEvent_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_TRIG(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_TG); +} + +/** + * @brief Generate break event. + * @rmtoll EGR BG LL_TIM_GenerateEvent_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_BRK(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_BG); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_EF_Init Initialisation and deinitialisation functions + * @{ + */ + +ErrorStatus LL_TIM_DeInit(TIM_TypeDef *TIMx); +void LL_TIM_StructInit(LL_TIM_InitTypeDef *TIM_InitStruct); +ErrorStatus LL_TIM_Init(TIM_TypeDef *TIMx, LL_TIM_InitTypeDef *TIM_InitStruct); +void LL_TIM_OC_StructInit(LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct); +ErrorStatus LL_TIM_OC_Init(TIM_TypeDef *TIMx, uint32_t Channel, LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct); +void LL_TIM_IC_StructInit(LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +ErrorStatus LL_TIM_IC_Init(TIM_TypeDef *TIMx, uint32_t Channel, LL_TIM_IC_InitTypeDef *TIM_IC_InitStruct); +void LL_TIM_ENCODER_StructInit(LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct); +ErrorStatus LL_TIM_ENCODER_Init(TIM_TypeDef *TIMx, LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct); +void LL_TIM_HALLSENSOR_StructInit(LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct); +ErrorStatus LL_TIM_HALLSENSOR_Init(TIM_TypeDef *TIMx, LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct); +void LL_TIM_BDTR_StructInit(LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct); +ErrorStatus LL_TIM_BDTR_Init(TIM_TypeDef *TIMx, LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* TIM1 || TIM2 || TIM3 || TIM4 || TIM5 || TIM6 || TIM7 || TIM8 || TIM9 || TIM10 || TIM11 || TIM12 || TIM13 || TIM14 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_LL_TIM_H */ diff --git a/Drivers/stm32f4xx_ll_usb.c b/libs/hal/stm32f4xx_ll_usb.c similarity index 96% rename from Drivers/stm32f4xx_ll_usb.c rename to libs/hal/stm32f4xx_ll_usb.c index fbd4bc0..1df5fcf 100644 --- a/Drivers/stm32f4xx_ll_usb.c +++ b/libs/hal/stm32f4xx_ll_usb.c @@ -1,2224 +1,2224 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_usb.c - * @author MCD Application Team - * @brief USB Low Layer HAL module driver. - * - * This file provides firmware functions to manage the following - * functionalities of the USB Peripheral Controller: - * + Initialization/de-initialization functions - * + I/O operation functions - * + Peripheral Control functions - * + Peripheral State functions - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - (#) Fill parameters of Init structure in USB_OTG_CfgTypeDef structure. - - (#) Call USB_CoreInit() API to initialize the USB Core peripheral. - - (#) The upper HAL HCD/PCD driver will call the right routines for its internal processes. - - @endverbatim - - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal.h" - -/** @addtogroup STM32F4xx_LL_USB_DRIVER - * @{ - */ - -#if defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx); - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup USB_LL_Exported_Functions USB Low Layer Exported Functions - * @{ - */ - -/** @defgroup USB_LL_Exported_Functions_Group1 Initialization/de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization/de-initialization functions ##### - =============================================================================== - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the USB Core - * @param USBx USB Instance - * @param cfg pointer to a USB_OTG_CfgTypeDef structure that contains - * the configuration information for the specified USBx peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) -{ - HAL_StatusTypeDef ret; - if (cfg.phy_itface == USB_OTG_ULPI_PHY) - { - USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); - - /* Init The ULPI Interface */ - USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_TSDPS | USB_OTG_GUSBCFG_ULPIFSLS | USB_OTG_GUSBCFG_PHYSEL); - - /* Select vbus source */ - USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_ULPIEVBUSD | USB_OTG_GUSBCFG_ULPIEVBUSI); - if (cfg.use_external_vbus == 1U) - { - USBx->GUSBCFG |= USB_OTG_GUSBCFG_ULPIEVBUSD; - } - - /* Reset after a PHY select */ - ret = USB_CoreReset(USBx); - } - else /* FS interface (embedded Phy) */ - { - /* Select FS Embedded PHY */ - USBx->GUSBCFG |= USB_OTG_GUSBCFG_PHYSEL; - - /* Reset after a PHY select */ - ret = USB_CoreReset(USBx); - - if (cfg.battery_charging_enable == 0U) - { - /* Activate the USB Transceiver */ - USBx->GCCFG |= USB_OTG_GCCFG_PWRDWN; - } - else - { - /* Deactivate the USB Transceiver */ - USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); - } - } - - if (cfg.dma_enable == 1U) - { - USBx->GAHBCFG |= USB_OTG_GAHBCFG_HBSTLEN_2; - USBx->GAHBCFG |= USB_OTG_GAHBCFG_DMAEN; - } - - return ret; -} - - -/** - * @brief Set the USB turnaround time - * @param USBx USB Instance - * @param hclk: AHB clock frequency - * @retval USB turnaround time In PHY Clocks number - */ -HAL_StatusTypeDef USB_SetTurnaroundTime(USB_OTG_GlobalTypeDef *USBx, - uint32_t hclk, uint8_t speed) -{ - uint32_t UsbTrd; - - /* The USBTRD is configured according to the tables below, depending on AHB frequency - used by application. In the low AHB frequency range it is used to stretch enough the USB response - time to IN tokens, the USB turnaround time, so to compensate for the longer AHB read access - latency to the Data FIFO */ - if (speed == USBD_FS_SPEED) - { - if ((hclk >= 14200000U) && (hclk < 15000000U)) - { - /* hclk Clock Range between 14.2-15 MHz */ - UsbTrd = 0xFU; - } - else if ((hclk >= 15000000U) && (hclk < 16000000U)) - { - /* hclk Clock Range between 15-16 MHz */ - UsbTrd = 0xEU; - } - else if ((hclk >= 16000000U) && (hclk < 17200000U)) - { - /* hclk Clock Range between 16-17.2 MHz */ - UsbTrd = 0xDU; - } - else if ((hclk >= 17200000U) && (hclk < 18500000U)) - { - /* hclk Clock Range between 17.2-18.5 MHz */ - UsbTrd = 0xCU; - } - else if ((hclk >= 18500000U) && (hclk < 20000000U)) - { - /* hclk Clock Range between 18.5-20 MHz */ - UsbTrd = 0xBU; - } - else if ((hclk >= 20000000U) && (hclk < 21800000U)) - { - /* hclk Clock Range between 20-21.8 MHz */ - UsbTrd = 0xAU; - } - else if ((hclk >= 21800000U) && (hclk < 24000000U)) - { - /* hclk Clock Range between 21.8-24 MHz */ - UsbTrd = 0x9U; - } - else if ((hclk >= 24000000U) && (hclk < 27700000U)) - { - /* hclk Clock Range between 24-27.7 MHz */ - UsbTrd = 0x8U; - } - else if ((hclk >= 27700000U) && (hclk < 32000000U)) - { - /* hclk Clock Range between 27.7-32 MHz */ - UsbTrd = 0x7U; - } - else /* if(hclk >= 32000000) */ - { - /* hclk Clock Range between 32-200 MHz */ - UsbTrd = 0x6U; - } - } - else if (speed == USBD_HS_SPEED) - { - UsbTrd = USBD_HS_TRDT_VALUE; - } - else - { - UsbTrd = USBD_DEFAULT_TRDT_VALUE; - } - - USBx->GUSBCFG &= ~USB_OTG_GUSBCFG_TRDT; - USBx->GUSBCFG |= (uint32_t)((UsbTrd << 10) & USB_OTG_GUSBCFG_TRDT); - - return HAL_OK; -} - -/** - * @brief USB_EnableGlobalInt - * Enables the controller's Global Int in the AHB Config reg - * @param USBx Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx) -{ - USBx->GAHBCFG |= USB_OTG_GAHBCFG_GINT; - return HAL_OK; -} - -/** - * @brief USB_DisableGlobalInt - * Disable the controller's Global Int in the AHB Config reg - * @param USBx Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx) -{ - USBx->GAHBCFG &= ~USB_OTG_GAHBCFG_GINT; - return HAL_OK; -} - -/** - * @brief USB_SetCurrentMode Set functional mode - * @param USBx Selected device - * @param mode current core mode - * This parameter can be one of these values: - * @arg USB_DEVICE_MODE Peripheral mode - * @arg USB_HOST_MODE Host mode - * @retval HAL status - */ -HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_OTG_ModeTypeDef mode) -{ - uint32_t ms = 0U; - - USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_FHMOD | USB_OTG_GUSBCFG_FDMOD); - - if (mode == USB_HOST_MODE) - { - USBx->GUSBCFG |= USB_OTG_GUSBCFG_FHMOD; - - do - { - HAL_Delay(1U); - ms++; - } while ((USB_GetMode(USBx) != (uint32_t)USB_HOST_MODE) && (ms < 50U)); - } - else if (mode == USB_DEVICE_MODE) - { - USBx->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; - - do - { - HAL_Delay(1U); - ms++; - } while ((USB_GetMode(USBx) != (uint32_t)USB_DEVICE_MODE) && (ms < 50U)); - } - else - { - return HAL_ERROR; - } - - if (ms == 50U) - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief USB_DevInit Initializes the USB_OTG controller registers - * for device mode - * @param USBx Selected device - * @param cfg pointer to a USB_OTG_CfgTypeDef structure that contains - * the configuration information for the specified USBx peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) -{ - HAL_StatusTypeDef ret = HAL_OK; - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t i; - - for (i = 0U; i < 15U; i++) - { - USBx->DIEPTXF[i] = 0U; - } - -#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - /* VBUS Sensing setup */ - if (cfg.vbus_sensing_enable == 0U) - { - USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS; - - /* Deactivate VBUS Sensing B */ - USBx->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - /* B-peripheral session valid override enable */ - USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; - USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; - } - else - { - /* Enable HW VBUS sensing */ - USBx->GCCFG |= USB_OTG_GCCFG_VBDEN; - } -#else - /* VBUS Sensing setup */ - if (cfg.vbus_sensing_enable == 0U) - { - /* - * Disable HW VBUS sensing. VBUS is internally considered to be always - * at VBUS-Valid level (5V). - */ - USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS; - USBx->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; - USBx->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN; - USBx->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN; - } - else - { - /* Enable HW VBUS sensing */ - USBx->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; - USBx->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; - } -#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ - - /* Restart the Phy Clock */ - USBx_PCGCCTL = 0U; - - /* Device mode configuration */ - USBx_DEVICE->DCFG |= DCFG_FRAME_INTERVAL_80; - - if (cfg.phy_itface == USB_OTG_ULPI_PHY) - { - if (cfg.speed == USBD_HS_SPEED) - { - /* Set Core speed to High speed mode */ - (void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_HIGH); - } - else - { - /* Set Core speed to Full speed mode */ - (void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_HIGH_IN_FULL); - } - } - else - { - /* Set Core speed to Full speed mode */ - (void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_FULL); - } - - /* Flush the FIFOs */ - if (USB_FlushTxFifo(USBx, 0x10U) != HAL_OK) /* all Tx FIFOs */ - { - ret = HAL_ERROR; - } - - if (USB_FlushRxFifo(USBx) != HAL_OK) - { - ret = HAL_ERROR; - } - - /* Clear all pending Device Interrupts */ - USBx_DEVICE->DIEPMSK = 0U; - USBx_DEVICE->DOEPMSK = 0U; - USBx_DEVICE->DAINTMSK = 0U; - - for (i = 0U; i < cfg.dev_endpoints; i++) - { - if ((USBx_INEP(i)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA) - { - if (i == 0U) - { - USBx_INEP(i)->DIEPCTL = USB_OTG_DIEPCTL_SNAK; - } - else - { - USBx_INEP(i)->DIEPCTL = USB_OTG_DIEPCTL_EPDIS | USB_OTG_DIEPCTL_SNAK; - } - } - else - { - USBx_INEP(i)->DIEPCTL = 0U; - } - - USBx_INEP(i)->DIEPTSIZ = 0U; - USBx_INEP(i)->DIEPINT = 0xFB7FU; - } - - for (i = 0U; i < cfg.dev_endpoints; i++) - { - if ((USBx_OUTEP(i)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) - { - if (i == 0U) - { - USBx_OUTEP(i)->DOEPCTL = USB_OTG_DOEPCTL_SNAK; - } - else - { - USBx_OUTEP(i)->DOEPCTL = USB_OTG_DOEPCTL_EPDIS | USB_OTG_DOEPCTL_SNAK; - } - } - else - { - USBx_OUTEP(i)->DOEPCTL = 0U; - } - - USBx_OUTEP(i)->DOEPTSIZ = 0U; - USBx_OUTEP(i)->DOEPINT = 0xFB7FU; - } - - USBx_DEVICE->DIEPMSK &= ~(USB_OTG_DIEPMSK_TXFURM); - - /* Disable all interrupts. */ - USBx->GINTMSK = 0U; - - /* Clear any pending interrupts */ - USBx->GINTSTS = 0xBFFFFFFFU; - - /* Enable the common interrupts */ - if (cfg.dma_enable == 0U) - { - USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM; - } - - /* Enable interrupts matching to the Device mode ONLY */ - USBx->GINTMSK |= USB_OTG_GINTMSK_USBSUSPM | USB_OTG_GINTMSK_USBRST | - USB_OTG_GINTMSK_ENUMDNEM | USB_OTG_GINTMSK_IEPINT | - USB_OTG_GINTMSK_OEPINT | USB_OTG_GINTMSK_IISOIXFRM | - USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM; - - if (cfg.Sof_enable != 0U) - { - USBx->GINTMSK |= USB_OTG_GINTMSK_SOFM; - } - - if (cfg.vbus_sensing_enable == 1U) - { - USBx->GINTMSK |= (USB_OTG_GINTMSK_SRQIM | USB_OTG_GINTMSK_OTGINT); - } - - return ret; -} - -/** - * @brief USB_FlushTxFifo Flush a Tx FIFO - * @param USBx Selected device - * @param num FIFO number - * This parameter can be a value from 1 to 15 - 15 means Flush all Tx FIFOs - * @retval HAL status - */ -HAL_StatusTypeDef USB_FlushTxFifo(USB_OTG_GlobalTypeDef *USBx, uint32_t num) -{ - __IO uint32_t count = 0U; - - /* Wait for AHB master IDLE state. */ - do - { - count++; - - if (count > 200000U) - { - return HAL_TIMEOUT; - } - } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0U); - - /* Flush TX Fifo */ - count = 0U; - USBx->GRSTCTL = (USB_OTG_GRSTCTL_TXFFLSH | (num << 6)); - - do - { - count++; - - if (count > 200000U) - { - return HAL_TIMEOUT; - } - } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_TXFFLSH) == USB_OTG_GRSTCTL_TXFFLSH); - - return HAL_OK; -} - -/** - * @brief USB_FlushRxFifo Flush Rx FIFO - * @param USBx Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx) -{ - __IO uint32_t count = 0U; - - /* Wait for AHB master IDLE state. */ - do - { - count++; - - if (count > 200000U) - { - return HAL_TIMEOUT; - } - } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0U); - - /* Flush RX Fifo */ - count = 0U; - USBx->GRSTCTL = USB_OTG_GRSTCTL_RXFFLSH; - - do - { - count++; - - if (count > 200000U) - { - return HAL_TIMEOUT; - } - } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_RXFFLSH) == USB_OTG_GRSTCTL_RXFFLSH); - - return HAL_OK; -} - -/** - * @brief USB_SetDevSpeed Initializes the DevSpd field of DCFG register - * depending the PHY type and the enumeration speed of the device. - * @param USBx Selected device - * @param speed device speed - * This parameter can be one of these values: - * @arg USB_OTG_SPEED_HIGH: High speed mode - * @arg USB_OTG_SPEED_HIGH_IN_FULL: High speed core in Full Speed mode - * @arg USB_OTG_SPEED_FULL: Full speed mode - * @retval Hal status - */ -HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx, uint8_t speed) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - - USBx_DEVICE->DCFG |= speed; - return HAL_OK; -} - -/** - * @brief USB_GetDevSpeed Return the Dev Speed - * @param USBx Selected device - * @retval speed device speed - * This parameter can be one of these values: - * @arg USBD_HS_SPEED: High speed mode - * @arg USBD_FS_SPEED: Full speed mode - */ -uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint8_t speed; - uint32_t DevEnumSpeed = USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD; - - if (DevEnumSpeed == DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ) - { - speed = USBD_HS_SPEED; - } - else if ((DevEnumSpeed == DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ) || - (DevEnumSpeed == DSTS_ENUMSPD_FS_PHY_48MHZ)) - { - speed = USBD_FS_SPEED; - } - else - { - speed = 0xFU; - } - - return speed; -} - -/** - * @brief Activate and configure an endpoint - * @param USBx Selected device - * @param ep pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t epnum = (uint32_t)ep->num; - - if (ep->is_in == 1U) - { - USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK)); - - if ((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_USBAEP) == 0U) - { - USBx_INEP(epnum)->DIEPCTL |= (ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ) | - ((uint32_t)ep->type << 18) | (epnum << 22) | - USB_OTG_DIEPCTL_SD0PID_SEVNFRM | - USB_OTG_DIEPCTL_USBAEP; - } - } - else - { - USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16); - - if (((USBx_OUTEP(epnum)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0U) - { - USBx_OUTEP(epnum)->DOEPCTL |= (ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ) | - ((uint32_t)ep->type << 18) | - USB_OTG_DIEPCTL_SD0PID_SEVNFRM | - USB_OTG_DOEPCTL_USBAEP; - } - } - return HAL_OK; -} - -/** - * @brief Activate and configure a dedicated endpoint - * @param USBx Selected device - * @param ep pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t epnum = (uint32_t)ep->num; - - /* Read DEPCTLn register */ - if (ep->is_in == 1U) - { - if (((USBx_INEP(epnum)->DIEPCTL) & USB_OTG_DIEPCTL_USBAEP) == 0U) - { - USBx_INEP(epnum)->DIEPCTL |= (ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ) | - ((uint32_t)ep->type << 18) | (epnum << 22) | - USB_OTG_DIEPCTL_SD0PID_SEVNFRM | - USB_OTG_DIEPCTL_USBAEP; - } - - USBx_DEVICE->DEACHMSK |= USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK)); - } - else - { - if (((USBx_OUTEP(epnum)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0U) - { - USBx_OUTEP(epnum)->DOEPCTL |= (ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ) | - ((uint32_t)ep->type << 18) | (epnum << 22) | - USB_OTG_DOEPCTL_USBAEP; - } - - USBx_DEVICE->DEACHMSK |= USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16); - } - - return HAL_OK; -} - -/** - * @brief De-activate and de-initialize an endpoint - * @param USBx Selected device - * @param ep pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t epnum = (uint32_t)ep->num; - - /* Read DEPCTLn register */ - if (ep->is_in == 1U) - { - if ((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA) - { - USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SNAK; - USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_EPDIS; - } - - USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK))); - USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK))); - USBx_INEP(epnum)->DIEPCTL &= ~(USB_OTG_DIEPCTL_USBAEP | - USB_OTG_DIEPCTL_MPSIZ | - USB_OTG_DIEPCTL_TXFNUM | - USB_OTG_DIEPCTL_SD0PID_SEVNFRM | - USB_OTG_DIEPCTL_EPTYP); - } - else - { - if ((USBx_OUTEP(epnum)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) - { - USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SNAK; - USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_EPDIS; - } - - USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16)); - USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16)); - USBx_OUTEP(epnum)->DOEPCTL &= ~(USB_OTG_DOEPCTL_USBAEP | - USB_OTG_DOEPCTL_MPSIZ | - USB_OTG_DOEPCTL_SD0PID_SEVNFRM | - USB_OTG_DOEPCTL_EPTYP); - } - - return HAL_OK; -} - -/** - * @brief De-activate and de-initialize a dedicated endpoint - * @param USBx Selected device - * @param ep pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t epnum = (uint32_t)ep->num; - - /* Read DEPCTLn register */ - if (ep->is_in == 1U) - { - if ((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA) - { - USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SNAK; - USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_EPDIS; - } - - USBx_INEP(epnum)->DIEPCTL &= ~ USB_OTG_DIEPCTL_USBAEP; - USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK))); - } - else - { - if ((USBx_OUTEP(epnum)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) - { - USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SNAK; - USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_EPDIS; - } - - USBx_OUTEP(epnum)->DOEPCTL &= ~USB_OTG_DOEPCTL_USBAEP; - USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16)); - } - - return HAL_OK; -} - -/** - * @brief USB_EPStartXfer : setup and starts a transfer over an EP - * @param USBx Selected device - * @param ep pointer to endpoint structure - * @param dma USB dma enabled or disabled - * This parameter can be one of these values: - * 0 : DMA feature not used - * 1 : DMA feature used - * @retval HAL status - */ -HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t epnum = (uint32_t)ep->num; - uint16_t pktcnt; - - /* IN endpoint */ - if (ep->is_in == 1U) - { - /* Zero Length Packet? */ - if (ep->xfer_len == 0U) - { - USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); - USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19)); - USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); - } - else - { - /* Program the transfer size and packet count - * as follows: xfersize = N * maxpacket + - * short_packet pktcnt = N + (short_packet - * exist ? 1 : 0) - */ - USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); - USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); - USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & - (((ep->xfer_len + ep->maxpacket - 1U) / ep->maxpacket) << 19)); - - USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len); - - if (ep->type == EP_TYPE_ISOC) - { - USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_MULCNT); - USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_MULCNT & (1U << 29)); - } - } - - if (dma == 1U) - { - if ((uint32_t)ep->dma_addr != 0U) - { - USBx_INEP(epnum)->DIEPDMA = (uint32_t)(ep->dma_addr); - } - - if (ep->type == EP_TYPE_ISOC) - { - if ((USBx_DEVICE->DSTS & (1U << 8)) == 0U) - { - USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SODDFRM; - } - else - { - USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; - } - } - - /* EP enable, IN data in FIFO */ - USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); - } - else - { - /* EP enable, IN data in FIFO */ - USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); - - if (ep->type != EP_TYPE_ISOC) - { - /* Enable the Tx FIFO Empty Interrupt for this EP */ - if (ep->xfer_len > 0U) - { - USBx_DEVICE->DIEPEMPMSK |= 1UL << (ep->num & EP_ADDR_MSK); - } - } - else - { - if ((USBx_DEVICE->DSTS & (1U << 8)) == 0U) - { - USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SODDFRM; - } - else - { - USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; - } - - (void)USB_WritePacket(USBx, ep->xfer_buff, ep->num, (uint16_t)ep->xfer_len, dma); - } - } - } - else /* OUT endpoint */ - { - /* Program the transfer size and packet count as follows: - * pktcnt = N - * xfersize = N * maxpacket - */ - USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ); - USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT); - - if (ep->xfer_len == 0U) - { - USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ep->maxpacket); - USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19)); - } - else - { - pktcnt = (uint16_t)((ep->xfer_len + ep->maxpacket - 1U) / ep->maxpacket); - ep->xfer_size = ep->maxpacket * pktcnt; - - USBx_OUTEP(epnum)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_PKTCNT & ((uint32_t)pktcnt << 19); - USBx_OUTEP(epnum)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_XFRSIZ & ep->xfer_size; - } - - if (dma == 1U) - { - if ((uint32_t)ep->xfer_buff != 0U) - { - USBx_OUTEP(epnum)->DOEPDMA = (uint32_t)(ep->xfer_buff); - } - } - - if (ep->type == EP_TYPE_ISOC) - { - if ((USBx_DEVICE->DSTS & (1U << 8)) == 0U) - { - USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SODDFRM; - } - else - { - USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM; - } - } - /* EP enable */ - USBx_OUTEP(epnum)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA); - } - - return HAL_OK; -} - -/** - * @brief USB_EP0StartXfer : setup and starts a transfer over the EP 0 - * @param USBx Selected device - * @param ep pointer to endpoint structure - * @param dma USB dma enabled or disabled - * This parameter can be one of these values: - * 0 : DMA feature not used - * 1 : DMA feature used - * @retval HAL status - */ -HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t epnum = (uint32_t)ep->num; - - /* IN endpoint */ - if (ep->is_in == 1U) - { - /* Zero Length Packet? */ - if (ep->xfer_len == 0U) - { - USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); - USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19)); - USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); - } - else - { - /* Program the transfer size and packet count - * as follows: xfersize = N * maxpacket + - * short_packet pktcnt = N + (short_packet - * exist ? 1 : 0) - */ - USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); - USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); - - if (ep->xfer_len > ep->maxpacket) - { - ep->xfer_len = ep->maxpacket; - } - USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19)); - USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len); - } - - if (dma == 1U) - { - if ((uint32_t)ep->dma_addr != 0U) - { - USBx_INEP(epnum)->DIEPDMA = (uint32_t)(ep->dma_addr); - } - - /* EP enable, IN data in FIFO */ - USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); - } - else - { - /* EP enable, IN data in FIFO */ - USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); - - /* Enable the Tx FIFO Empty Interrupt for this EP */ - if (ep->xfer_len > 0U) - { - USBx_DEVICE->DIEPEMPMSK |= 1UL << (ep->num & EP_ADDR_MSK); - } - } - } - else /* OUT endpoint */ - { - /* Program the transfer size and packet count as follows: - * pktcnt = N - * xfersize = N * maxpacket - */ - USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ); - USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT); - - if (ep->xfer_len > 0U) - { - ep->xfer_len = ep->maxpacket; - } - - /* Store transfer size, for EP0 this is equal to endpoint max packet size */ - ep->xfer_size = ep->maxpacket; - - USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19)); - USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ep->xfer_size); - - if (dma == 1U) - { - if ((uint32_t)ep->xfer_buff != 0U) - { - USBx_OUTEP(epnum)->DOEPDMA = (uint32_t)(ep->xfer_buff); - } - } - - /* EP enable */ - USBx_OUTEP(epnum)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA); - } - - return HAL_OK; -} - - -/** - * @brief USB_EPStoptXfer Stop transfer on an EP - * @param USBx usb device instance - * @param ep pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_EPStopXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) -{ - __IO uint32_t count = 0U; - HAL_StatusTypeDef ret = HAL_OK; - uint32_t USBx_BASE = (uint32_t)USBx; - - /* IN endpoint */ - if (ep->is_in == 1U) - { - /* EP enable, IN data in FIFO */ - if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA) - { - USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_SNAK); - USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_EPDIS); - - do - { - count++; - - if (count > 10000U) - { - ret = HAL_ERROR; - break; - } - } while (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA); - } - } - else /* OUT endpoint */ - { - if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) - { - USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_SNAK); - USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_EPDIS); - - do - { - count++; - - if (count > 10000U) - { - ret = HAL_ERROR; - break; - } - } while (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA); - } - } - - return ret; -} - - -/** - * @brief USB_WritePacket : Writes a packet into the Tx FIFO associated - * with the EP/channel - * @param USBx Selected device - * @param src pointer to source buffer - * @param ch_ep_num endpoint or host channel number - * @param len Number of bytes to write - * @param dma USB dma enabled or disabled - * This parameter can be one of these values: - * 0 : DMA feature not used - * 1 : DMA feature used - * @retval HAL status - */ -HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, - uint8_t ch_ep_num, uint16_t len, uint8_t dma) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint8_t *pSrc = src; - uint32_t count32b; - uint32_t i; - - if (dma == 0U) - { - count32b = ((uint32_t)len + 3U) / 4U; - for (i = 0U; i < count32b; i++) - { - USBx_DFIFO((uint32_t)ch_ep_num) = __UNALIGNED_UINT32_READ(pSrc); - pSrc++; - pSrc++; - pSrc++; - pSrc++; - } - } - - return HAL_OK; -} - -/** - * @brief USB_ReadPacket : read a packet from the RX FIFO - * @param USBx Selected device - * @param dest source pointer - * @param len Number of bytes to read - * @retval pointer to destination buffer - */ -void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint8_t *pDest = dest; - uint32_t pData; - uint32_t i; - uint32_t count32b = (uint32_t)len >> 2U; - uint16_t remaining_bytes = len % 4U; - - for (i = 0U; i < count32b; i++) - { - __UNALIGNED_UINT32_WRITE(pDest, USBx_DFIFO(0U)); - pDest++; - pDest++; - pDest++; - pDest++; - } - - /* When Number of data is not word aligned, read the remaining byte */ - if (remaining_bytes != 0U) - { - i = 0U; - __UNALIGNED_UINT32_WRITE(&pData, USBx_DFIFO(0U)); - - do - { - *(uint8_t *)pDest = (uint8_t)(pData >> (8U * (uint8_t)(i))); - i++; - pDest++; - remaining_bytes--; - } while (remaining_bytes != 0U); - } - - return ((void *)pDest); -} - -/** - * @brief USB_EPSetStall : set a stall condition over an EP - * @param USBx Selected device - * @param ep pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t epnum = (uint32_t)ep->num; - - if (ep->is_in == 1U) - { - if (((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == 0U) && (epnum != 0U)) - { - USBx_INEP(epnum)->DIEPCTL &= ~(USB_OTG_DIEPCTL_EPDIS); - } - USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_STALL; - } - else - { - if (((USBx_OUTEP(epnum)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == 0U) && (epnum != 0U)) - { - USBx_OUTEP(epnum)->DOEPCTL &= ~(USB_OTG_DOEPCTL_EPDIS); - } - USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_STALL; - } - - return HAL_OK; -} - -/** - * @brief USB_EPClearStall : Clear a stall condition over an EP - * @param USBx Selected device - * @param ep pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t epnum = (uint32_t)ep->num; - - if (ep->is_in == 1U) - { - USBx_INEP(epnum)->DIEPCTL &= ~USB_OTG_DIEPCTL_STALL; - if ((ep->type == EP_TYPE_INTR) || (ep->type == EP_TYPE_BULK)) - { - USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; /* DATA0 */ - } - } - else - { - USBx_OUTEP(epnum)->DOEPCTL &= ~USB_OTG_DOEPCTL_STALL; - if ((ep->type == EP_TYPE_INTR) || (ep->type == EP_TYPE_BULK)) - { - USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM; /* DATA0 */ - } - } - return HAL_OK; -} - -/** - * @brief USB_StopDevice : Stop the usb device mode - * @param USBx Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx) -{ - HAL_StatusTypeDef ret; - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t i; - - /* Clear Pending interrupt */ - for (i = 0U; i < 15U; i++) - { - USBx_INEP(i)->DIEPINT = 0xFB7FU; - USBx_OUTEP(i)->DOEPINT = 0xFB7FU; - } - - /* Clear interrupt masks */ - USBx_DEVICE->DIEPMSK = 0U; - USBx_DEVICE->DOEPMSK = 0U; - USBx_DEVICE->DAINTMSK = 0U; - - /* Flush the FIFO */ - ret = USB_FlushRxFifo(USBx); - if (ret != HAL_OK) - { - return ret; - } - - ret = USB_FlushTxFifo(USBx, 0x10U); - if (ret != HAL_OK) - { - return ret; - } - - return ret; -} - -/** - * @brief USB_SetDevAddress : Stop the usb device mode - * @param USBx Selected device - * @param address new device address to be assigned - * This parameter can be a value from 0 to 255 - * @retval HAL status - */ -HAL_StatusTypeDef USB_SetDevAddress(USB_OTG_GlobalTypeDef *USBx, uint8_t address) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - - USBx_DEVICE->DCFG &= ~(USB_OTG_DCFG_DAD); - USBx_DEVICE->DCFG |= ((uint32_t)address << 4) & USB_OTG_DCFG_DAD; - - return HAL_OK; -} - -/** - * @brief USB_DevConnect : Connect the USB device by enabling Rpu - * @param USBx Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_DevConnect(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - - /* In case phy is stopped, ensure to ungate and restore the phy CLK */ - USBx_PCGCCTL &= ~(USB_OTG_PCGCCTL_STOPCLK | USB_OTG_PCGCCTL_GATECLK); - - USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_SDIS; - - return HAL_OK; -} - -/** - * @brief USB_DevDisconnect : Disconnect the USB device by disabling Rpu - * @param USBx Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_DevDisconnect(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - - /* In case phy is stopped, ensure to ungate and restore the phy CLK */ - USBx_PCGCCTL &= ~(USB_OTG_PCGCCTL_STOPCLK | USB_OTG_PCGCCTL_GATECLK); - - USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS; - - return HAL_OK; -} - -/** - * @brief USB_ReadInterrupts: return the global USB interrupt status - * @param USBx Selected device - * @retval HAL status - */ -uint32_t USB_ReadInterrupts(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t tmpreg; - - tmpreg = USBx->GINTSTS; - tmpreg &= USBx->GINTMSK; - - return tmpreg; -} - -/** - * @brief USB_ReadDevAllOutEpInterrupt: return the USB device OUT endpoints interrupt status - * @param USBx Selected device - * @retval HAL status - */ -uint32_t USB_ReadDevAllOutEpInterrupt(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t tmpreg; - - tmpreg = USBx_DEVICE->DAINT; - tmpreg &= USBx_DEVICE->DAINTMSK; - - return ((tmpreg & 0xffff0000U) >> 16); -} - -/** - * @brief USB_ReadDevAllInEpInterrupt: return the USB device IN endpoints interrupt status - * @param USBx Selected device - * @retval HAL status - */ -uint32_t USB_ReadDevAllInEpInterrupt(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t tmpreg; - - tmpreg = USBx_DEVICE->DAINT; - tmpreg &= USBx_DEVICE->DAINTMSK; - - return ((tmpreg & 0xFFFFU)); -} - -/** - * @brief Returns Device OUT EP Interrupt register - * @param USBx Selected device - * @param epnum endpoint number - * This parameter can be a value from 0 to 15 - * @retval Device OUT EP Interrupt register - */ -uint32_t USB_ReadDevOutEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t tmpreg; - - tmpreg = USBx_OUTEP((uint32_t)epnum)->DOEPINT; - tmpreg &= USBx_DEVICE->DOEPMSK; - - return tmpreg; -} - -/** - * @brief Returns Device IN EP Interrupt register - * @param USBx Selected device - * @param epnum endpoint number - * This parameter can be a value from 0 to 15 - * @retval Device IN EP Interrupt register - */ -uint32_t USB_ReadDevInEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t tmpreg; - uint32_t msk; - uint32_t emp; - - msk = USBx_DEVICE->DIEPMSK; - emp = USBx_DEVICE->DIEPEMPMSK; - msk |= ((emp >> (epnum & EP_ADDR_MSK)) & 0x1U) << 7; - tmpreg = USBx_INEP((uint32_t)epnum)->DIEPINT & msk; - - return tmpreg; -} - -/** - * @brief USB_ClearInterrupts: clear a USB interrupt - * @param USBx Selected device - * @param interrupt flag - * @retval None - */ -void USB_ClearInterrupts(USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt) -{ - USBx->GINTSTS |= interrupt; -} - -/** - * @brief Returns USB core mode - * @param USBx Selected device - * @retval return core mode : Host or Device - * This parameter can be one of these values: - * 0 : Host - * 1 : Device - */ -uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx) -{ - return ((USBx->GINTSTS) & 0x1U); -} - -/** - * @brief Activate EP0 for Setup transactions - * @param USBx Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_ActivateSetup(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - - /* Set the MPS of the IN EP0 to 64 bytes */ - USBx_INEP(0U)->DIEPCTL &= ~USB_OTG_DIEPCTL_MPSIZ; - - USBx_DEVICE->DCTL |= USB_OTG_DCTL_CGINAK; - - return HAL_OK; -} - -/** - * @brief Prepare the EP0 to start the first control setup - * @param USBx Selected device - * @param dma USB dma enabled or disabled - * This parameter can be one of these values: - * 0 : DMA feature not used - * 1 : DMA feature used - * @param psetup pointer to setup packet - * @retval HAL status - */ -HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t gSNPSiD = *(__IO uint32_t *)(&USBx->CID + 0x1U); - - if (gSNPSiD > USB_OTG_CORE_ID_300A) - { - if ((USBx_OUTEP(0U)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) - { - return HAL_OK; - } - } - - USBx_OUTEP(0U)->DOEPTSIZ = 0U; - USBx_OUTEP(0U)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19)); - USBx_OUTEP(0U)->DOEPTSIZ |= (3U * 8U); - USBx_OUTEP(0U)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_STUPCNT; - - if (dma == 1U) - { - USBx_OUTEP(0U)->DOEPDMA = (uint32_t)psetup; - /* EP enable */ - USBx_OUTEP(0U)->DOEPCTL |= USB_OTG_DOEPCTL_EPENA | USB_OTG_DOEPCTL_USBAEP; - } - - return HAL_OK; -} - -/** - * @brief Reset the USB Core (needed after USB clock settings change) - * @param USBx Selected device - * @retval HAL status - */ -static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx) -{ - __IO uint32_t count = 0U; - - /* Wait for AHB master IDLE state. */ - do - { - count++; - - if (count > 200000U) - { - return HAL_TIMEOUT; - } - } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0U); - - /* Core Soft Reset */ - count = 0U; - USBx->GRSTCTL |= USB_OTG_GRSTCTL_CSRST; - - do - { - count++; - - if (count > 200000U) - { - return HAL_TIMEOUT; - } - } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_CSRST) == USB_OTG_GRSTCTL_CSRST); - - return HAL_OK; -} - -/** - * @brief USB_HostInit : Initializes the USB OTG controller registers - * for Host mode - * @param USBx Selected device - * @param cfg pointer to a USB_OTG_CfgTypeDef structure that contains - * the configuration information for the specified USBx peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef USB_HostInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) -{ - HAL_StatusTypeDef ret = HAL_OK; - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t i; - - /* Restart the Phy Clock */ - USBx_PCGCCTL = 0U; - -#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - /* Disable HW VBUS sensing */ - USBx->GCCFG &= ~(USB_OTG_GCCFG_VBDEN); -#else - /* - * Disable HW VBUS sensing. VBUS is internally considered to be always - * at VBUS-Valid level (5V). - */ - USBx->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; - USBx->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN; - USBx->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN; -#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ -#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) - /* Disable Battery chargin detector */ - USBx->GCCFG &= ~(USB_OTG_GCCFG_BCDEN); -#endif /* defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ - - if ((USBx->CID & (0x1U << 8)) != 0U) - { - if (cfg.speed == USBH_FSLS_SPEED) - { - /* Force Device Enumeration to FS/LS mode only */ - USBx_HOST->HCFG |= USB_OTG_HCFG_FSLSS; - } - else - { - /* Set default Max speed support */ - USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSS); - } - } - else - { - /* Set default Max speed support */ - USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSS); - } - - /* Make sure the FIFOs are flushed. */ - if (USB_FlushTxFifo(USBx, 0x10U) != HAL_OK) /* all Tx FIFOs */ - { - ret = HAL_ERROR; - } - - if (USB_FlushRxFifo(USBx) != HAL_OK) - { - ret = HAL_ERROR; - } - - /* Clear all pending HC Interrupts */ - for (i = 0U; i < cfg.Host_channels; i++) - { - USBx_HC(i)->HCINT = 0xFFFFFFFFU; - USBx_HC(i)->HCINTMSK = 0U; - } - - /* Disable all interrupts. */ - USBx->GINTMSK = 0U; - - /* Clear any pending interrupts */ - USBx->GINTSTS = 0xFFFFFFFFU; - - if ((USBx->CID & (0x1U << 8)) != 0U) - { - /* set Rx FIFO size */ - USBx->GRXFSIZ = 0x200U; - USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t)(((0x100U << 16) & USB_OTG_NPTXFD) | 0x200U); - USBx->HPTXFSIZ = (uint32_t)(((0xE0U << 16) & USB_OTG_HPTXFSIZ_PTXFD) | 0x300U); - } - else - { - /* set Rx FIFO size */ - USBx->GRXFSIZ = 0x80U; - USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t)(((0x60U << 16) & USB_OTG_NPTXFD) | 0x80U); - USBx->HPTXFSIZ = (uint32_t)(((0x40U << 16)& USB_OTG_HPTXFSIZ_PTXFD) | 0xE0U); - } - - /* Enable the common interrupts */ - if (cfg.dma_enable == 0U) - { - USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM; - } - - /* Enable interrupts matching to the Host mode ONLY */ - USBx->GINTMSK |= (USB_OTG_GINTMSK_PRTIM | USB_OTG_GINTMSK_HCIM | \ - USB_OTG_GINTMSK_SOFM | USB_OTG_GINTSTS_DISCINT | \ - USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM); - - return ret; -} - -/** - * @brief USB_InitFSLSPClkSel : Initializes the FSLSPClkSel field of the - * HCFG register on the PHY type and set the right frame interval - * @param USBx Selected device - * @param freq clock frequency - * This parameter can be one of these values: - * HCFG_48_MHZ : Full Speed 48 MHz Clock - * HCFG_6_MHZ : Low Speed 6 MHz Clock - * @retval HAL status - */ -HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx, uint8_t freq) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - - USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSPCS); - USBx_HOST->HCFG |= (uint32_t)freq & USB_OTG_HCFG_FSLSPCS; - - if (freq == HCFG_48_MHZ) - { - USBx_HOST->HFIR = 48000U; - } - else if (freq == HCFG_6_MHZ) - { - USBx_HOST->HFIR = 6000U; - } - else - { - /* ... */ - } - - return HAL_OK; -} - -/** - * @brief USB_OTG_ResetPort : Reset Host Port - * @param USBx Selected device - * @retval HAL status - * @note (1)The application must wait at least 10 ms - * before clearing the reset bit. - */ -HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - - __IO uint32_t hprt0 = 0U; - - hprt0 = USBx_HPRT0; - - hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET | - USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG); - - USBx_HPRT0 = (USB_OTG_HPRT_PRST | hprt0); - HAL_Delay(100U); /* See Note #1 */ - USBx_HPRT0 = ((~USB_OTG_HPRT_PRST) & hprt0); - HAL_Delay(10U); - - return HAL_OK; -} - -/** - * @brief USB_DriveVbus : activate or de-activate vbus - * @param state VBUS state - * This parameter can be one of these values: - * 0 : Deactivate VBUS - * 1 : Activate VBUS - * @retval HAL status - */ -HAL_StatusTypeDef USB_DriveVbus(USB_OTG_GlobalTypeDef *USBx, uint8_t state) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - __IO uint32_t hprt0 = 0U; - - hprt0 = USBx_HPRT0; - - hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET | - USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG); - - if (((hprt0 & USB_OTG_HPRT_PPWR) == 0U) && (state == 1U)) - { - USBx_HPRT0 = (USB_OTG_HPRT_PPWR | hprt0); - } - if (((hprt0 & USB_OTG_HPRT_PPWR) == USB_OTG_HPRT_PPWR) && (state == 0U)) - { - USBx_HPRT0 = ((~USB_OTG_HPRT_PPWR) & hprt0); - } - return HAL_OK; -} - -/** - * @brief Return Host Core speed - * @param USBx Selected device - * @retval speed : Host speed - * This parameter can be one of these values: - * @arg HCD_SPEED_HIGH: High speed mode - * @arg HCD_SPEED_FULL: Full speed mode - * @arg HCD_SPEED_LOW: Low speed mode - */ -uint32_t USB_GetHostSpeed(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - __IO uint32_t hprt0 = 0U; - - hprt0 = USBx_HPRT0; - return ((hprt0 & USB_OTG_HPRT_PSPD) >> 17); -} - -/** - * @brief Return Host Current Frame number - * @param USBx Selected device - * @retval current frame number - */ -uint32_t USB_GetCurrentFrame(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - - return (USBx_HOST->HFNUM & USB_OTG_HFNUM_FRNUM); -} - -/** - * @brief Initialize a host channel - * @param USBx Selected device - * @param ch_num Channel number - * This parameter can be a value from 1 to 15 - * @param epnum Endpoint number - * This parameter can be a value from 1 to 15 - * @param dev_address Current device address - * This parameter can be a value from 0 to 255 - * @param speed Current device speed - * This parameter can be one of these values: - * @arg USB_OTG_SPEED_HIGH: High speed mode - * @arg USB_OTG_SPEED_FULL: Full speed mode - * @arg USB_OTG_SPEED_LOW: Low speed mode - * @param ep_type Endpoint Type - * This parameter can be one of these values: - * @arg EP_TYPE_CTRL: Control type - * @arg EP_TYPE_ISOC: Isochronous type - * @arg EP_TYPE_BULK: Bulk type - * @arg EP_TYPE_INTR: Interrupt type - * @param mps Max Packet Size - * This parameter can be a value from 0 to 32K - * @retval HAL state - */ -HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num, - uint8_t epnum, uint8_t dev_address, uint8_t speed, - uint8_t ep_type, uint16_t mps) -{ - HAL_StatusTypeDef ret = HAL_OK; - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t HCcharEpDir; - uint32_t HCcharLowSpeed; - uint32_t HostCoreSpeed; - - /* Clear old interrupt conditions for this host channel. */ - USBx_HC((uint32_t)ch_num)->HCINT = 0xFFFFFFFFU; - - /* Enable channel interrupts required for this transfer. */ - switch (ep_type) - { - case EP_TYPE_CTRL: - case EP_TYPE_BULK: - USBx_HC((uint32_t)ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM | - USB_OTG_HCINTMSK_STALLM | - USB_OTG_HCINTMSK_TXERRM | - USB_OTG_HCINTMSK_DTERRM | - USB_OTG_HCINTMSK_AHBERR | - USB_OTG_HCINTMSK_NAKM; - - if ((epnum & 0x80U) == 0x80U) - { - USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM; - } - else - { - if ((USBx->CID & (0x1U << 8)) != 0U) - { - USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_NYET | - USB_OTG_HCINTMSK_ACKM; - } - } - break; - - case EP_TYPE_INTR: - USBx_HC((uint32_t)ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM | - USB_OTG_HCINTMSK_STALLM | - USB_OTG_HCINTMSK_TXERRM | - USB_OTG_HCINTMSK_DTERRM | - USB_OTG_HCINTMSK_NAKM | - USB_OTG_HCINTMSK_AHBERR | - USB_OTG_HCINTMSK_FRMORM; - - if ((epnum & 0x80U) == 0x80U) - { - USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM; - } - - break; - - case EP_TYPE_ISOC: - USBx_HC((uint32_t)ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM | - USB_OTG_HCINTMSK_ACKM | - USB_OTG_HCINTMSK_AHBERR | - USB_OTG_HCINTMSK_FRMORM; - - if ((epnum & 0x80U) == 0x80U) - { - USBx_HC((uint32_t)ch_num)->HCINTMSK |= (USB_OTG_HCINTMSK_TXERRM | USB_OTG_HCINTMSK_BBERRM); - } - break; - - default: - ret = HAL_ERROR; - break; - } - - /* Enable host channel Halt interrupt */ - USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_CHHM; - - /* Enable the top level host channel interrupt. */ - USBx_HOST->HAINTMSK |= 1UL << (ch_num & 0xFU); - - /* Make sure host channel interrupts are enabled. */ - USBx->GINTMSK |= USB_OTG_GINTMSK_HCIM; - - /* Program the HCCHAR register */ - if ((epnum & 0x80U) == 0x80U) - { - HCcharEpDir = (0x1U << 15) & USB_OTG_HCCHAR_EPDIR; - } - else - { - HCcharEpDir = 0U; - } - - HostCoreSpeed = USB_GetHostSpeed(USBx); - - /* LS device plugged to HUB */ - if ((speed == HPRT0_PRTSPD_LOW_SPEED) && (HostCoreSpeed != HPRT0_PRTSPD_LOW_SPEED)) - { - HCcharLowSpeed = (0x1U << 17) & USB_OTG_HCCHAR_LSDEV; - } - else - { - HCcharLowSpeed = 0U; - } - - USBx_HC((uint32_t)ch_num)->HCCHAR = (((uint32_t)dev_address << 22) & USB_OTG_HCCHAR_DAD) | - ((((uint32_t)epnum & 0x7FU) << 11) & USB_OTG_HCCHAR_EPNUM) | - (((uint32_t)ep_type << 18) & USB_OTG_HCCHAR_EPTYP) | - ((uint32_t)mps & USB_OTG_HCCHAR_MPSIZ) | HCcharEpDir | HCcharLowSpeed; - - if ((ep_type == EP_TYPE_INTR) || (ep_type == EP_TYPE_ISOC)) - { - USBx_HC((uint32_t)ch_num)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM; - } - - return ret; -} - -/** - * @brief Start a transfer over a host channel - * @param USBx Selected device - * @param hc pointer to host channel structure - * @param dma USB dma enabled or disabled - * This parameter can be one of these values: - * 0 : DMA feature not used - * 1 : DMA feature used - * @retval HAL state - */ -HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t ch_num = (uint32_t)hc->ch_num; - __IO uint32_t tmpreg; - uint8_t is_oddframe; - uint16_t len_words; - uint16_t num_packets; - uint16_t max_hc_pkt_count = 256U; - - if (((USBx->CID & (0x1U << 8)) != 0U) && (hc->speed == USBH_HS_SPEED)) - { - /* in DMA mode host Core automatically issues ping in case of NYET/NAK */ - if ((dma == 1U) && ((hc->ep_type == EP_TYPE_CTRL) || (hc->ep_type == EP_TYPE_BULK))) - { - USBx_HC((uint32_t)ch_num)->HCINTMSK &= ~(USB_OTG_HCINTMSK_NYET | - USB_OTG_HCINTMSK_ACKM | - USB_OTG_HCINTMSK_NAKM); - } - - if ((dma == 0U) && (hc->do_ping == 1U)) - { - (void)USB_DoPing(USBx, hc->ch_num); - return HAL_OK; - } - - } - - /* Compute the expected number of packets associated to the transfer */ - if (hc->xfer_len > 0U) - { - num_packets = (uint16_t)((hc->xfer_len + hc->max_packet - 1U) / hc->max_packet); - - if (num_packets > max_hc_pkt_count) - { - num_packets = max_hc_pkt_count; - hc->XferSize = (uint32_t)num_packets * hc->max_packet; - } - } - else - { - num_packets = 1U; - } - - /* - * For IN channel HCTSIZ.XferSize is expected to be an integer multiple of - * max_packet size. - */ - if (hc->ep_is_in != 0U) - { - hc->XferSize = (uint32_t)num_packets * hc->max_packet; - } - else - { - hc->XferSize = hc->xfer_len; - } - - /* Initialize the HCTSIZn register */ - USBx_HC(ch_num)->HCTSIZ = (hc->XferSize & USB_OTG_HCTSIZ_XFRSIZ) | - (((uint32_t)num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) | - (((uint32_t)hc->data_pid << 29) & USB_OTG_HCTSIZ_DPID); - - if (dma != 0U) - { - /* xfer_buff MUST be 32-bits aligned */ - USBx_HC(ch_num)->HCDMA = (uint32_t)hc->xfer_buff; - } - - is_oddframe = (((uint32_t)USBx_HOST->HFNUM & 0x01U) != 0U) ? 0U : 1U; - USBx_HC(ch_num)->HCCHAR &= ~USB_OTG_HCCHAR_ODDFRM; - USBx_HC(ch_num)->HCCHAR |= (uint32_t)is_oddframe << 29; - - /* Set host channel enable */ - tmpreg = USBx_HC(ch_num)->HCCHAR; - tmpreg &= ~USB_OTG_HCCHAR_CHDIS; - - /* make sure to set the correct ep direction */ - if (hc->ep_is_in != 0U) - { - tmpreg |= USB_OTG_HCCHAR_EPDIR; - } - else - { - tmpreg &= ~USB_OTG_HCCHAR_EPDIR; - } - tmpreg |= USB_OTG_HCCHAR_CHENA; - USBx_HC(ch_num)->HCCHAR = tmpreg; - - if (dma != 0U) /* dma mode */ - { - return HAL_OK; - } - - if ((hc->ep_is_in == 0U) && (hc->xfer_len > 0U)) - { - switch (hc->ep_type) - { - /* Non periodic transfer */ - case EP_TYPE_CTRL: - case EP_TYPE_BULK: - - len_words = (uint16_t)((hc->xfer_len + 3U) / 4U); - - /* check if there is enough space in FIFO space */ - if (len_words > (USBx->HNPTXSTS & 0xFFFFU)) - { - /* need to process data in nptxfempty interrupt */ - USBx->GINTMSK |= USB_OTG_GINTMSK_NPTXFEM; - } - break; - - /* Periodic transfer */ - case EP_TYPE_INTR: - case EP_TYPE_ISOC: - len_words = (uint16_t)((hc->xfer_len + 3U) / 4U); - /* check if there is enough space in FIFO space */ - if (len_words > (USBx_HOST->HPTXSTS & 0xFFFFU)) /* split the transfer */ - { - /* need to process data in ptxfempty interrupt */ - USBx->GINTMSK |= USB_OTG_GINTMSK_PTXFEM; - } - break; - - default: - break; - } - - /* Write packet into the Tx FIFO. */ - (void)USB_WritePacket(USBx, hc->xfer_buff, hc->ch_num, (uint16_t)hc->xfer_len, 0); - } - - return HAL_OK; -} - -/** - * @brief Read all host channel interrupts status - * @param USBx Selected device - * @retval HAL state - */ -uint32_t USB_HC_ReadInterrupt(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - - return ((USBx_HOST->HAINT) & 0xFFFFU); -} - -/** - * @brief Halt a host channel - * @param USBx Selected device - * @param hc_num Host Channel number - * This parameter can be a value from 1 to 15 - * @retval HAL state - */ -HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t hcnum = (uint32_t)hc_num; - __IO uint32_t count = 0U; - uint32_t HcEpType = (USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_EPTYP) >> 18; - uint32_t ChannelEna = (USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_CHENA) >> 31; - - if (((USBx->GAHBCFG & USB_OTG_GAHBCFG_DMAEN) == USB_OTG_GAHBCFG_DMAEN) && - (ChannelEna == 0U)) - { - return HAL_OK; - } - - /* Check for space in the request queue to issue the halt. */ - if ((HcEpType == HCCHAR_CTRL) || (HcEpType == HCCHAR_BULK)) - { - USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHDIS; - - if ((USBx->GAHBCFG & USB_OTG_GAHBCFG_DMAEN) == 0U) - { - if ((USBx->HNPTXSTS & (0xFFU << 16)) == 0U) - { - USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA; - USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; - do - { - count++; - - if (count > 1000U) - { - break; - } - } while ((USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA); - } - else - { - USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; - } - } - } - else - { - USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHDIS; - - if ((USBx_HOST->HPTXSTS & (0xFFU << 16)) == 0U) - { - USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA; - USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; - do - { - count++; - - if (count > 1000U) - { - break; - } - } while ((USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA); - } - else - { - USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; - } - } - - return HAL_OK; -} - -/** - * @brief Initiate Do Ping protocol - * @param USBx Selected device - * @param hc_num Host Channel number - * This parameter can be a value from 1 to 15 - * @retval HAL state - */ -HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - uint32_t chnum = (uint32_t)ch_num; - uint32_t num_packets = 1U; - uint32_t tmpreg; - - USBx_HC(chnum)->HCTSIZ = ((num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) | - USB_OTG_HCTSIZ_DOPING; - - /* Set host channel enable */ - tmpreg = USBx_HC(chnum)->HCCHAR; - tmpreg &= ~USB_OTG_HCCHAR_CHDIS; - tmpreg |= USB_OTG_HCCHAR_CHENA; - USBx_HC(chnum)->HCCHAR = tmpreg; - - return HAL_OK; -} - -/** - * @brief Stop Host Core - * @param USBx Selected device - * @retval HAL state - */ -HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx) -{ - HAL_StatusTypeDef ret = HAL_OK; - uint32_t USBx_BASE = (uint32_t)USBx; - __IO uint32_t count = 0U; - uint32_t value; - uint32_t i; - - (void)USB_DisableGlobalInt(USBx); - - /* Flush USB FIFO */ - if (USB_FlushTxFifo(USBx, 0x10U) != HAL_OK) /* all Tx FIFOs */ - { - ret = HAL_ERROR; - } - - if (USB_FlushRxFifo(USBx) != HAL_OK) - { - ret = HAL_ERROR; - } - - /* Flush out any leftover queued requests. */ - for (i = 0U; i <= 15U; i++) - { - value = USBx_HC(i)->HCCHAR; - value |= USB_OTG_HCCHAR_CHDIS; - value &= ~USB_OTG_HCCHAR_CHENA; - value &= ~USB_OTG_HCCHAR_EPDIR; - USBx_HC(i)->HCCHAR = value; - } - - /* Halt all channels to put them into a known state. */ - for (i = 0U; i <= 15U; i++) - { - value = USBx_HC(i)->HCCHAR; - value |= USB_OTG_HCCHAR_CHDIS; - value |= USB_OTG_HCCHAR_CHENA; - value &= ~USB_OTG_HCCHAR_EPDIR; - USBx_HC(i)->HCCHAR = value; - - do - { - count++; - - if (count > 1000U) - { - break; - } - } while ((USBx_HC(i)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA); - } - - /* Clear any pending Host interrupts */ - USBx_HOST->HAINT = 0xFFFFFFFFU; - USBx->GINTSTS = 0xFFFFFFFFU; - - (void)USB_EnableGlobalInt(USBx); - - return ret; -} - -/** - * @brief USB_ActivateRemoteWakeup active remote wakeup signalling - * @param USBx Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - - if ((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS) - { - /* active Remote wakeup signalling */ - USBx_DEVICE->DCTL |= USB_OTG_DCTL_RWUSIG; - } - - return HAL_OK; -} - -/** - * @brief USB_DeActivateRemoteWakeup de-active remote wakeup signalling - * @param USBx Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t USBx_BASE = (uint32_t)USBx; - - /* active Remote wakeup signalling */ - USBx_DEVICE->DCTL &= ~(USB_OTG_DCTL_RWUSIG); - - return HAL_OK; -} -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - - -/** - * @} - */ - -/** - * @} - */ -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ -#endif /* defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) */ - -/** - * @} - */ +/** + ****************************************************************************** + * @file stm32f4xx_ll_usb.c + * @author MCD Application Team + * @brief USB Low Layer HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Initialization/de-initialization functions + * + I/O operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Fill parameters of Init structure in USB_OTG_CfgTypeDef structure. + + (#) Call USB_CoreInit() API to initialize the USB Core peripheral. + + (#) The upper HAL HCD/PCD driver will call the right routines for its internal processes. + + @endverbatim + + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_LL_USB_DRIVER + * @{ + */ + +#if defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx); + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup USB_LL_Exported_Functions USB Low Layer Exported Functions + * @{ + */ + +/** @defgroup USB_LL_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization/de-initialization functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the USB Core + * @param USBx USB Instance + * @param cfg pointer to a USB_OTG_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) +{ + HAL_StatusTypeDef ret; + if (cfg.phy_itface == USB_OTG_ULPI_PHY) + { + USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); + + /* Init The ULPI Interface */ + USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_TSDPS | USB_OTG_GUSBCFG_ULPIFSLS | USB_OTG_GUSBCFG_PHYSEL); + + /* Select vbus source */ + USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_ULPIEVBUSD | USB_OTG_GUSBCFG_ULPIEVBUSI); + if (cfg.use_external_vbus == 1U) + { + USBx->GUSBCFG |= USB_OTG_GUSBCFG_ULPIEVBUSD; + } + + /* Reset after a PHY select */ + ret = USB_CoreReset(USBx); + } + else /* FS interface (embedded Phy) */ + { + /* Select FS Embedded PHY */ + USBx->GUSBCFG |= USB_OTG_GUSBCFG_PHYSEL; + + /* Reset after a PHY select */ + ret = USB_CoreReset(USBx); + + if (cfg.battery_charging_enable == 0U) + { + /* Activate the USB Transceiver */ + USBx->GCCFG |= USB_OTG_GCCFG_PWRDWN; + } + else + { + /* Deactivate the USB Transceiver */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); + } + } + + if (cfg.dma_enable == 1U) + { + USBx->GAHBCFG |= USB_OTG_GAHBCFG_HBSTLEN_2; + USBx->GAHBCFG |= USB_OTG_GAHBCFG_DMAEN; + } + + return ret; +} + + +/** + * @brief Set the USB turnaround time + * @param USBx USB Instance + * @param hclk: AHB clock frequency + * @retval USB turnaround time In PHY Clocks number + */ +HAL_StatusTypeDef USB_SetTurnaroundTime(USB_OTG_GlobalTypeDef *USBx, + uint32_t hclk, uint8_t speed) +{ + uint32_t UsbTrd; + + /* The USBTRD is configured according to the tables below, depending on AHB frequency + used by application. In the low AHB frequency range it is used to stretch enough the USB response + time to IN tokens, the USB turnaround time, so to compensate for the longer AHB read access + latency to the Data FIFO */ + if (speed == USBD_FS_SPEED) + { + if ((hclk >= 14200000U) && (hclk < 15000000U)) + { + /* hclk Clock Range between 14.2-15 MHz */ + UsbTrd = 0xFU; + } + else if ((hclk >= 15000000U) && (hclk < 16000000U)) + { + /* hclk Clock Range between 15-16 MHz */ + UsbTrd = 0xEU; + } + else if ((hclk >= 16000000U) && (hclk < 17200000U)) + { + /* hclk Clock Range between 16-17.2 MHz */ + UsbTrd = 0xDU; + } + else if ((hclk >= 17200000U) && (hclk < 18500000U)) + { + /* hclk Clock Range between 17.2-18.5 MHz */ + UsbTrd = 0xCU; + } + else if ((hclk >= 18500000U) && (hclk < 20000000U)) + { + /* hclk Clock Range between 18.5-20 MHz */ + UsbTrd = 0xBU; + } + else if ((hclk >= 20000000U) && (hclk < 21800000U)) + { + /* hclk Clock Range between 20-21.8 MHz */ + UsbTrd = 0xAU; + } + else if ((hclk >= 21800000U) && (hclk < 24000000U)) + { + /* hclk Clock Range between 21.8-24 MHz */ + UsbTrd = 0x9U; + } + else if ((hclk >= 24000000U) && (hclk < 27700000U)) + { + /* hclk Clock Range between 24-27.7 MHz */ + UsbTrd = 0x8U; + } + else if ((hclk >= 27700000U) && (hclk < 32000000U)) + { + /* hclk Clock Range between 27.7-32 MHz */ + UsbTrd = 0x7U; + } + else /* if(hclk >= 32000000) */ + { + /* hclk Clock Range between 32-200 MHz */ + UsbTrd = 0x6U; + } + } + else if (speed == USBD_HS_SPEED) + { + UsbTrd = USBD_HS_TRDT_VALUE; + } + else + { + UsbTrd = USBD_DEFAULT_TRDT_VALUE; + } + + USBx->GUSBCFG &= ~USB_OTG_GUSBCFG_TRDT; + USBx->GUSBCFG |= (uint32_t)((UsbTrd << 10) & USB_OTG_GUSBCFG_TRDT); + + return HAL_OK; +} + +/** + * @brief USB_EnableGlobalInt + * Enables the controller's Global Int in the AHB Config reg + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx) +{ + USBx->GAHBCFG |= USB_OTG_GAHBCFG_GINT; + return HAL_OK; +} + +/** + * @brief USB_DisableGlobalInt + * Disable the controller's Global Int in the AHB Config reg + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx) +{ + USBx->GAHBCFG &= ~USB_OTG_GAHBCFG_GINT; + return HAL_OK; +} + +/** + * @brief USB_SetCurrentMode Set functional mode + * @param USBx Selected device + * @param mode current core mode + * This parameter can be one of these values: + * @arg USB_DEVICE_MODE Peripheral mode + * @arg USB_HOST_MODE Host mode + * @retval HAL status + */ +HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_OTG_ModeTypeDef mode) +{ + uint32_t ms = 0U; + + USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_FHMOD | USB_OTG_GUSBCFG_FDMOD); + + if (mode == USB_HOST_MODE) + { + USBx->GUSBCFG |= USB_OTG_GUSBCFG_FHMOD; + + do + { + HAL_Delay(1U); + ms++; + } while ((USB_GetMode(USBx) != (uint32_t)USB_HOST_MODE) && (ms < 50U)); + } + else if (mode == USB_DEVICE_MODE) + { + USBx->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; + + do + { + HAL_Delay(1U); + ms++; + } while ((USB_GetMode(USBx) != (uint32_t)USB_DEVICE_MODE) && (ms < 50U)); + } + else + { + return HAL_ERROR; + } + + if (ms == 50U) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief USB_DevInit Initializes the USB_OTG controller registers + * for device mode + * @param USBx Selected device + * @param cfg pointer to a USB_OTG_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) +{ + HAL_StatusTypeDef ret = HAL_OK; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t i; + + for (i = 0U; i < 15U; i++) + { + USBx->DIEPTXF[i] = 0U; + } + +#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) + /* VBUS Sensing setup */ + if (cfg.vbus_sensing_enable == 0U) + { + USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS; + + /* Deactivate VBUS Sensing B */ + USBx->GCCFG &= ~USB_OTG_GCCFG_VBDEN; + + /* B-peripheral session valid override enable */ + USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; + USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; + } + else + { + /* Enable HW VBUS sensing */ + USBx->GCCFG |= USB_OTG_GCCFG_VBDEN; + } +#else + /* VBUS Sensing setup */ + if (cfg.vbus_sensing_enable == 0U) + { + /* + * Disable HW VBUS sensing. VBUS is internally considered to be always + * at VBUS-Valid level (5V). + */ + USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS; + USBx->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; + USBx->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN; + USBx->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN; + } + else + { + /* Enable HW VBUS sensing */ + USBx->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; + USBx->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; + } +#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ + + /* Restart the Phy Clock */ + USBx_PCGCCTL = 0U; + + /* Device mode configuration */ + USBx_DEVICE->DCFG |= DCFG_FRAME_INTERVAL_80; + + if (cfg.phy_itface == USB_OTG_ULPI_PHY) + { + if (cfg.speed == USBD_HS_SPEED) + { + /* Set Core speed to High speed mode */ + (void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_HIGH); + } + else + { + /* Set Core speed to Full speed mode */ + (void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_HIGH_IN_FULL); + } + } + else + { + /* Set Core speed to Full speed mode */ + (void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_FULL); + } + + /* Flush the FIFOs */ + if (USB_FlushTxFifo(USBx, 0x10U) != HAL_OK) /* all Tx FIFOs */ + { + ret = HAL_ERROR; + } + + if (USB_FlushRxFifo(USBx) != HAL_OK) + { + ret = HAL_ERROR; + } + + /* Clear all pending Device Interrupts */ + USBx_DEVICE->DIEPMSK = 0U; + USBx_DEVICE->DOEPMSK = 0U; + USBx_DEVICE->DAINTMSK = 0U; + + for (i = 0U; i < cfg.dev_endpoints; i++) + { + if ((USBx_INEP(i)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA) + { + if (i == 0U) + { + USBx_INEP(i)->DIEPCTL = USB_OTG_DIEPCTL_SNAK; + } + else + { + USBx_INEP(i)->DIEPCTL = USB_OTG_DIEPCTL_EPDIS | USB_OTG_DIEPCTL_SNAK; + } + } + else + { + USBx_INEP(i)->DIEPCTL = 0U; + } + + USBx_INEP(i)->DIEPTSIZ = 0U; + USBx_INEP(i)->DIEPINT = 0xFB7FU; + } + + for (i = 0U; i < cfg.dev_endpoints; i++) + { + if ((USBx_OUTEP(i)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) + { + if (i == 0U) + { + USBx_OUTEP(i)->DOEPCTL = USB_OTG_DOEPCTL_SNAK; + } + else + { + USBx_OUTEP(i)->DOEPCTL = USB_OTG_DOEPCTL_EPDIS | USB_OTG_DOEPCTL_SNAK; + } + } + else + { + USBx_OUTEP(i)->DOEPCTL = 0U; + } + + USBx_OUTEP(i)->DOEPTSIZ = 0U; + USBx_OUTEP(i)->DOEPINT = 0xFB7FU; + } + + USBx_DEVICE->DIEPMSK &= ~(USB_OTG_DIEPMSK_TXFURM); + + /* Disable all interrupts. */ + USBx->GINTMSK = 0U; + + /* Clear any pending interrupts */ + USBx->GINTSTS = 0xBFFFFFFFU; + + /* Enable the common interrupts */ + if (cfg.dma_enable == 0U) + { + USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM; + } + + /* Enable interrupts matching to the Device mode ONLY */ + USBx->GINTMSK |= USB_OTG_GINTMSK_USBSUSPM | USB_OTG_GINTMSK_USBRST | + USB_OTG_GINTMSK_ENUMDNEM | USB_OTG_GINTMSK_IEPINT | + USB_OTG_GINTMSK_OEPINT | USB_OTG_GINTMSK_IISOIXFRM | + USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM; + + if (cfg.Sof_enable != 0U) + { + USBx->GINTMSK |= USB_OTG_GINTMSK_SOFM; + } + + if (cfg.vbus_sensing_enable == 1U) + { + USBx->GINTMSK |= (USB_OTG_GINTMSK_SRQIM | USB_OTG_GINTMSK_OTGINT); + } + + return ret; +} + +/** + * @brief USB_FlushTxFifo Flush a Tx FIFO + * @param USBx Selected device + * @param num FIFO number + * This parameter can be a value from 1 to 15 + 15 means Flush all Tx FIFOs + * @retval HAL status + */ +HAL_StatusTypeDef USB_FlushTxFifo(USB_OTG_GlobalTypeDef *USBx, uint32_t num) +{ + __IO uint32_t count = 0U; + + /* Wait for AHB master IDLE state. */ + do + { + count++; + + if (count > 200000U) + { + return HAL_TIMEOUT; + } + } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0U); + + /* Flush TX Fifo */ + count = 0U; + USBx->GRSTCTL = (USB_OTG_GRSTCTL_TXFFLSH | (num << 6)); + + do + { + count++; + + if (count > 200000U) + { + return HAL_TIMEOUT; + } + } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_TXFFLSH) == USB_OTG_GRSTCTL_TXFFLSH); + + return HAL_OK; +} + +/** + * @brief USB_FlushRxFifo Flush Rx FIFO + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx) +{ + __IO uint32_t count = 0U; + + /* Wait for AHB master IDLE state. */ + do + { + count++; + + if (count > 200000U) + { + return HAL_TIMEOUT; + } + } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0U); + + /* Flush RX Fifo */ + count = 0U; + USBx->GRSTCTL = USB_OTG_GRSTCTL_RXFFLSH; + + do + { + count++; + + if (count > 200000U) + { + return HAL_TIMEOUT; + } + } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_RXFFLSH) == USB_OTG_GRSTCTL_RXFFLSH); + + return HAL_OK; +} + +/** + * @brief USB_SetDevSpeed Initializes the DevSpd field of DCFG register + * depending the PHY type and the enumeration speed of the device. + * @param USBx Selected device + * @param speed device speed + * This parameter can be one of these values: + * @arg USB_OTG_SPEED_HIGH: High speed mode + * @arg USB_OTG_SPEED_HIGH_IN_FULL: High speed core in Full Speed mode + * @arg USB_OTG_SPEED_FULL: Full speed mode + * @retval Hal status + */ +HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx, uint8_t speed) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + USBx_DEVICE->DCFG |= speed; + return HAL_OK; +} + +/** + * @brief USB_GetDevSpeed Return the Dev Speed + * @param USBx Selected device + * @retval speed device speed + * This parameter can be one of these values: + * @arg USBD_HS_SPEED: High speed mode + * @arg USBD_FS_SPEED: Full speed mode + */ +uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint8_t speed; + uint32_t DevEnumSpeed = USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD; + + if (DevEnumSpeed == DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ) + { + speed = USBD_HS_SPEED; + } + else if ((DevEnumSpeed == DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ) || + (DevEnumSpeed == DSTS_ENUMSPD_FS_PHY_48MHZ)) + { + speed = USBD_FS_SPEED; + } + else + { + speed = 0xFU; + } + + return speed; +} + +/** + * @brief Activate and configure an endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + if (ep->is_in == 1U) + { + USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK)); + + if ((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_USBAEP) == 0U) + { + USBx_INEP(epnum)->DIEPCTL |= (ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ) | + ((uint32_t)ep->type << 18) | (epnum << 22) | + USB_OTG_DIEPCTL_SD0PID_SEVNFRM | + USB_OTG_DIEPCTL_USBAEP; + } + } + else + { + USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16); + + if (((USBx_OUTEP(epnum)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0U) + { + USBx_OUTEP(epnum)->DOEPCTL |= (ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ) | + ((uint32_t)ep->type << 18) | + USB_OTG_DIEPCTL_SD0PID_SEVNFRM | + USB_OTG_DOEPCTL_USBAEP; + } + } + return HAL_OK; +} + +/** + * @brief Activate and configure a dedicated endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + /* Read DEPCTLn register */ + if (ep->is_in == 1U) + { + if (((USBx_INEP(epnum)->DIEPCTL) & USB_OTG_DIEPCTL_USBAEP) == 0U) + { + USBx_INEP(epnum)->DIEPCTL |= (ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ) | + ((uint32_t)ep->type << 18) | (epnum << 22) | + USB_OTG_DIEPCTL_SD0PID_SEVNFRM | + USB_OTG_DIEPCTL_USBAEP; + } + + USBx_DEVICE->DEACHMSK |= USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK)); + } + else + { + if (((USBx_OUTEP(epnum)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0U) + { + USBx_OUTEP(epnum)->DOEPCTL |= (ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ) | + ((uint32_t)ep->type << 18) | (epnum << 22) | + USB_OTG_DOEPCTL_USBAEP; + } + + USBx_DEVICE->DEACHMSK |= USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16); + } + + return HAL_OK; +} + +/** + * @brief De-activate and de-initialize an endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + /* Read DEPCTLn register */ + if (ep->is_in == 1U) + { + if ((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA) + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SNAK; + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_EPDIS; + } + + USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK))); + USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK))); + USBx_INEP(epnum)->DIEPCTL &= ~(USB_OTG_DIEPCTL_USBAEP | + USB_OTG_DIEPCTL_MPSIZ | + USB_OTG_DIEPCTL_TXFNUM | + USB_OTG_DIEPCTL_SD0PID_SEVNFRM | + USB_OTG_DIEPCTL_EPTYP); + } + else + { + if ((USBx_OUTEP(epnum)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) + { + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SNAK; + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_EPDIS; + } + + USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16)); + USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16)); + USBx_OUTEP(epnum)->DOEPCTL &= ~(USB_OTG_DOEPCTL_USBAEP | + USB_OTG_DOEPCTL_MPSIZ | + USB_OTG_DOEPCTL_SD0PID_SEVNFRM | + USB_OTG_DOEPCTL_EPTYP); + } + + return HAL_OK; +} + +/** + * @brief De-activate and de-initialize a dedicated endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + /* Read DEPCTLn register */ + if (ep->is_in == 1U) + { + if ((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA) + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SNAK; + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_EPDIS; + } + + USBx_INEP(epnum)->DIEPCTL &= ~ USB_OTG_DIEPCTL_USBAEP; + USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK))); + } + else + { + if ((USBx_OUTEP(epnum)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) + { + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SNAK; + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_EPDIS; + } + + USBx_OUTEP(epnum)->DOEPCTL &= ~USB_OTG_DOEPCTL_USBAEP; + USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16)); + } + + return HAL_OK; +} + +/** + * @brief USB_EPStartXfer : setup and starts a transfer over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @param dma USB dma enabled or disabled + * This parameter can be one of these values: + * 0 : DMA feature not used + * 1 : DMA feature used + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + uint16_t pktcnt; + + /* IN endpoint */ + if (ep->is_in == 1U) + { + /* Zero Length Packet? */ + if (ep->xfer_len == 0U) + { + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19)); + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); + } + else + { + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & + (((ep->xfer_len + ep->maxpacket - 1U) / ep->maxpacket) << 19)); + + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len); + + if (ep->type == EP_TYPE_ISOC) + { + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_MULCNT); + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_MULCNT & (1U << 29)); + } + } + + if (dma == 1U) + { + if ((uint32_t)ep->dma_addr != 0U) + { + USBx_INEP(epnum)->DIEPDMA = (uint32_t)(ep->dma_addr); + } + + if (ep->type == EP_TYPE_ISOC) + { + if ((USBx_DEVICE->DSTS & (1U << 8)) == 0U) + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SODDFRM; + } + else + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; + } + } + + /* EP enable, IN data in FIFO */ + USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); + } + else + { + /* EP enable, IN data in FIFO */ + USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); + + if (ep->type != EP_TYPE_ISOC) + { + /* Enable the Tx FIFO Empty Interrupt for this EP */ + if (ep->xfer_len > 0U) + { + USBx_DEVICE->DIEPEMPMSK |= 1UL << (ep->num & EP_ADDR_MSK); + } + } + else + { + if ((USBx_DEVICE->DSTS & (1U << 8)) == 0U) + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SODDFRM; + } + else + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; + } + + (void)USB_WritePacket(USBx, ep->xfer_buff, ep->num, (uint16_t)ep->xfer_len, dma); + } + } + } + else /* OUT endpoint */ + { + /* Program the transfer size and packet count as follows: + * pktcnt = N + * xfersize = N * maxpacket + */ + USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ); + USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT); + + if (ep->xfer_len == 0U) + { + USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ep->maxpacket); + USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19)); + } + else + { + pktcnt = (uint16_t)((ep->xfer_len + ep->maxpacket - 1U) / ep->maxpacket); + ep->xfer_size = ep->maxpacket * pktcnt; + + USBx_OUTEP(epnum)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_PKTCNT & ((uint32_t)pktcnt << 19); + USBx_OUTEP(epnum)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_XFRSIZ & ep->xfer_size; + } + + if (dma == 1U) + { + if ((uint32_t)ep->xfer_buff != 0U) + { + USBx_OUTEP(epnum)->DOEPDMA = (uint32_t)(ep->xfer_buff); + } + } + + if (ep->type == EP_TYPE_ISOC) + { + if ((USBx_DEVICE->DSTS & (1U << 8)) == 0U) + { + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SODDFRM; + } + else + { + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM; + } + } + /* EP enable */ + USBx_OUTEP(epnum)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA); + } + + return HAL_OK; +} + +/** + * @brief USB_EP0StartXfer : setup and starts a transfer over the EP 0 + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @param dma USB dma enabled or disabled + * This parameter can be one of these values: + * 0 : DMA feature not used + * 1 : DMA feature used + * @retval HAL status + */ +HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + /* IN endpoint */ + if (ep->is_in == 1U) + { + /* Zero Length Packet? */ + if (ep->xfer_len == 0U) + { + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19)); + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); + } + else + { + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); + + if (ep->xfer_len > ep->maxpacket) + { + ep->xfer_len = ep->maxpacket; + } + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19)); + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len); + } + + if (dma == 1U) + { + if ((uint32_t)ep->dma_addr != 0U) + { + USBx_INEP(epnum)->DIEPDMA = (uint32_t)(ep->dma_addr); + } + + /* EP enable, IN data in FIFO */ + USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); + } + else + { + /* EP enable, IN data in FIFO */ + USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); + + /* Enable the Tx FIFO Empty Interrupt for this EP */ + if (ep->xfer_len > 0U) + { + USBx_DEVICE->DIEPEMPMSK |= 1UL << (ep->num & EP_ADDR_MSK); + } + } + } + else /* OUT endpoint */ + { + /* Program the transfer size and packet count as follows: + * pktcnt = N + * xfersize = N * maxpacket + */ + USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ); + USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT); + + if (ep->xfer_len > 0U) + { + ep->xfer_len = ep->maxpacket; + } + + /* Store transfer size, for EP0 this is equal to endpoint max packet size */ + ep->xfer_size = ep->maxpacket; + + USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19)); + USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ep->xfer_size); + + if (dma == 1U) + { + if ((uint32_t)ep->xfer_buff != 0U) + { + USBx_OUTEP(epnum)->DOEPDMA = (uint32_t)(ep->xfer_buff); + } + } + + /* EP enable */ + USBx_OUTEP(epnum)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA); + } + + return HAL_OK; +} + + +/** + * @brief USB_EPStoptXfer Stop transfer on an EP + * @param USBx usb device instance + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPStopXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) +{ + __IO uint32_t count = 0U; + HAL_StatusTypeDef ret = HAL_OK; + uint32_t USBx_BASE = (uint32_t)USBx; + + /* IN endpoint */ + if (ep->is_in == 1U) + { + /* EP enable, IN data in FIFO */ + if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA) + { + USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_SNAK); + USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_EPDIS); + + do + { + count++; + + if (count > 10000U) + { + ret = HAL_ERROR; + break; + } + } while (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA); + } + } + else /* OUT endpoint */ + { + if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) + { + USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_SNAK); + USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_EPDIS); + + do + { + count++; + + if (count > 10000U) + { + ret = HAL_ERROR; + break; + } + } while (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA); + } + } + + return ret; +} + + +/** + * @brief USB_WritePacket : Writes a packet into the Tx FIFO associated + * with the EP/channel + * @param USBx Selected device + * @param src pointer to source buffer + * @param ch_ep_num endpoint or host channel number + * @param len Number of bytes to write + * @param dma USB dma enabled or disabled + * This parameter can be one of these values: + * 0 : DMA feature not used + * 1 : DMA feature used + * @retval HAL status + */ +HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, + uint8_t ch_ep_num, uint16_t len, uint8_t dma) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint8_t *pSrc = src; + uint32_t count32b; + uint32_t i; + + if (dma == 0U) + { + count32b = ((uint32_t)len + 3U) / 4U; + for (i = 0U; i < count32b; i++) + { + USBx_DFIFO((uint32_t)ch_ep_num) = __UNALIGNED_UINT32_READ(pSrc); + pSrc++; + pSrc++; + pSrc++; + pSrc++; + } + } + + return HAL_OK; +} + +/** + * @brief USB_ReadPacket : read a packet from the RX FIFO + * @param USBx Selected device + * @param dest source pointer + * @param len Number of bytes to read + * @retval pointer to destination buffer + */ +void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint8_t *pDest = dest; + uint32_t pData; + uint32_t i; + uint32_t count32b = (uint32_t)len >> 2U; + uint16_t remaining_bytes = len % 4U; + + for (i = 0U; i < count32b; i++) + { + __UNALIGNED_UINT32_WRITE(pDest, USBx_DFIFO(0U)); + pDest++; + pDest++; + pDest++; + pDest++; + } + + /* When Number of data is not word aligned, read the remaining byte */ + if (remaining_bytes != 0U) + { + i = 0U; + __UNALIGNED_UINT32_WRITE(&pData, USBx_DFIFO(0U)); + + do + { + *(uint8_t *)pDest = (uint8_t)(pData >> (8U * (uint8_t)(i))); + i++; + pDest++; + remaining_bytes--; + } while (remaining_bytes != 0U); + } + + return ((void *)pDest); +} + +/** + * @brief USB_EPSetStall : set a stall condition over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + if (ep->is_in == 1U) + { + if (((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == 0U) && (epnum != 0U)) + { + USBx_INEP(epnum)->DIEPCTL &= ~(USB_OTG_DIEPCTL_EPDIS); + } + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_STALL; + } + else + { + if (((USBx_OUTEP(epnum)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == 0U) && (epnum != 0U)) + { + USBx_OUTEP(epnum)->DOEPCTL &= ~(USB_OTG_DOEPCTL_EPDIS); + } + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_STALL; + } + + return HAL_OK; +} + +/** + * @brief USB_EPClearStall : Clear a stall condition over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + if (ep->is_in == 1U) + { + USBx_INEP(epnum)->DIEPCTL &= ~USB_OTG_DIEPCTL_STALL; + if ((ep->type == EP_TYPE_INTR) || (ep->type == EP_TYPE_BULK)) + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; /* DATA0 */ + } + } + else + { + USBx_OUTEP(epnum)->DOEPCTL &= ~USB_OTG_DOEPCTL_STALL; + if ((ep->type == EP_TYPE_INTR) || (ep->type == EP_TYPE_BULK)) + { + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM; /* DATA0 */ + } + } + return HAL_OK; +} + +/** + * @brief USB_StopDevice : Stop the usb device mode + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx) +{ + HAL_StatusTypeDef ret; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t i; + + /* Clear Pending interrupt */ + for (i = 0U; i < 15U; i++) + { + USBx_INEP(i)->DIEPINT = 0xFB7FU; + USBx_OUTEP(i)->DOEPINT = 0xFB7FU; + } + + /* Clear interrupt masks */ + USBx_DEVICE->DIEPMSK = 0U; + USBx_DEVICE->DOEPMSK = 0U; + USBx_DEVICE->DAINTMSK = 0U; + + /* Flush the FIFO */ + ret = USB_FlushRxFifo(USBx); + if (ret != HAL_OK) + { + return ret; + } + + ret = USB_FlushTxFifo(USBx, 0x10U); + if (ret != HAL_OK) + { + return ret; + } + + return ret; +} + +/** + * @brief USB_SetDevAddress : Stop the usb device mode + * @param USBx Selected device + * @param address new device address to be assigned + * This parameter can be a value from 0 to 255 + * @retval HAL status + */ +HAL_StatusTypeDef USB_SetDevAddress(USB_OTG_GlobalTypeDef *USBx, uint8_t address) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + USBx_DEVICE->DCFG &= ~(USB_OTG_DCFG_DAD); + USBx_DEVICE->DCFG |= ((uint32_t)address << 4) & USB_OTG_DCFG_DAD; + + return HAL_OK; +} + +/** + * @brief USB_DevConnect : Connect the USB device by enabling Rpu + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevConnect(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + /* In case phy is stopped, ensure to ungate and restore the phy CLK */ + USBx_PCGCCTL &= ~(USB_OTG_PCGCCTL_STOPCLK | USB_OTG_PCGCCTL_GATECLK); + + USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_SDIS; + + return HAL_OK; +} + +/** + * @brief USB_DevDisconnect : Disconnect the USB device by disabling Rpu + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevDisconnect(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + /* In case phy is stopped, ensure to ungate and restore the phy CLK */ + USBx_PCGCCTL &= ~(USB_OTG_PCGCCTL_STOPCLK | USB_OTG_PCGCCTL_GATECLK); + + USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS; + + return HAL_OK; +} + +/** + * @brief USB_ReadInterrupts: return the global USB interrupt status + * @param USBx Selected device + * @retval HAL status + */ +uint32_t USB_ReadInterrupts(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t tmpreg; + + tmpreg = USBx->GINTSTS; + tmpreg &= USBx->GINTMSK; + + return tmpreg; +} + +/** + * @brief USB_ReadDevAllOutEpInterrupt: return the USB device OUT endpoints interrupt status + * @param USBx Selected device + * @retval HAL status + */ +uint32_t USB_ReadDevAllOutEpInterrupt(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t tmpreg; + + tmpreg = USBx_DEVICE->DAINT; + tmpreg &= USBx_DEVICE->DAINTMSK; + + return ((tmpreg & 0xffff0000U) >> 16); +} + +/** + * @brief USB_ReadDevAllInEpInterrupt: return the USB device IN endpoints interrupt status + * @param USBx Selected device + * @retval HAL status + */ +uint32_t USB_ReadDevAllInEpInterrupt(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t tmpreg; + + tmpreg = USBx_DEVICE->DAINT; + tmpreg &= USBx_DEVICE->DAINTMSK; + + return ((tmpreg & 0xFFFFU)); +} + +/** + * @brief Returns Device OUT EP Interrupt register + * @param USBx Selected device + * @param epnum endpoint number + * This parameter can be a value from 0 to 15 + * @retval Device OUT EP Interrupt register + */ +uint32_t USB_ReadDevOutEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t tmpreg; + + tmpreg = USBx_OUTEP((uint32_t)epnum)->DOEPINT; + tmpreg &= USBx_DEVICE->DOEPMSK; + + return tmpreg; +} + +/** + * @brief Returns Device IN EP Interrupt register + * @param USBx Selected device + * @param epnum endpoint number + * This parameter can be a value from 0 to 15 + * @retval Device IN EP Interrupt register + */ +uint32_t USB_ReadDevInEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t tmpreg; + uint32_t msk; + uint32_t emp; + + msk = USBx_DEVICE->DIEPMSK; + emp = USBx_DEVICE->DIEPEMPMSK; + msk |= ((emp >> (epnum & EP_ADDR_MSK)) & 0x1U) << 7; + tmpreg = USBx_INEP((uint32_t)epnum)->DIEPINT & msk; + + return tmpreg; +} + +/** + * @brief USB_ClearInterrupts: clear a USB interrupt + * @param USBx Selected device + * @param interrupt flag + * @retval None + */ +void USB_ClearInterrupts(USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt) +{ + USBx->GINTSTS |= interrupt; +} + +/** + * @brief Returns USB core mode + * @param USBx Selected device + * @retval return core mode : Host or Device + * This parameter can be one of these values: + * 0 : Host + * 1 : Device + */ +uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx) +{ + return ((USBx->GINTSTS) & 0x1U); +} + +/** + * @brief Activate EP0 for Setup transactions + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateSetup(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + /* Set the MPS of the IN EP0 to 64 bytes */ + USBx_INEP(0U)->DIEPCTL &= ~USB_OTG_DIEPCTL_MPSIZ; + + USBx_DEVICE->DCTL |= USB_OTG_DCTL_CGINAK; + + return HAL_OK; +} + +/** + * @brief Prepare the EP0 to start the first control setup + * @param USBx Selected device + * @param dma USB dma enabled or disabled + * This parameter can be one of these values: + * 0 : DMA feature not used + * 1 : DMA feature used + * @param psetup pointer to setup packet + * @retval HAL status + */ +HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t gSNPSiD = *(__IO uint32_t *)(&USBx->CID + 0x1U); + + if (gSNPSiD > USB_OTG_CORE_ID_300A) + { + if ((USBx_OUTEP(0U)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) + { + return HAL_OK; + } + } + + USBx_OUTEP(0U)->DOEPTSIZ = 0U; + USBx_OUTEP(0U)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19)); + USBx_OUTEP(0U)->DOEPTSIZ |= (3U * 8U); + USBx_OUTEP(0U)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_STUPCNT; + + if (dma == 1U) + { + USBx_OUTEP(0U)->DOEPDMA = (uint32_t)psetup; + /* EP enable */ + USBx_OUTEP(0U)->DOEPCTL |= USB_OTG_DOEPCTL_EPENA | USB_OTG_DOEPCTL_USBAEP; + } + + return HAL_OK; +} + +/** + * @brief Reset the USB Core (needed after USB clock settings change) + * @param USBx Selected device + * @retval HAL status + */ +static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx) +{ + __IO uint32_t count = 0U; + + /* Wait for AHB master IDLE state. */ + do + { + count++; + + if (count > 200000U) + { + return HAL_TIMEOUT; + } + } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0U); + + /* Core Soft Reset */ + count = 0U; + USBx->GRSTCTL |= USB_OTG_GRSTCTL_CSRST; + + do + { + count++; + + if (count > 200000U) + { + return HAL_TIMEOUT; + } + } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_CSRST) == USB_OTG_GRSTCTL_CSRST); + + return HAL_OK; +} + +/** + * @brief USB_HostInit : Initializes the USB OTG controller registers + * for Host mode + * @param USBx Selected device + * @param cfg pointer to a USB_OTG_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_HostInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) +{ + HAL_StatusTypeDef ret = HAL_OK; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t i; + + /* Restart the Phy Clock */ + USBx_PCGCCTL = 0U; + +#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) + /* Disable HW VBUS sensing */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_VBDEN); +#else + /* + * Disable HW VBUS sensing. VBUS is internally considered to be always + * at VBUS-Valid level (5V). + */ + USBx->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; + USBx->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN; + USBx->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN; +#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ +#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) + /* Disable Battery chargin detector */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_BCDEN); +#endif /* defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */ + + if ((USBx->CID & (0x1U << 8)) != 0U) + { + if (cfg.speed == USBH_FSLS_SPEED) + { + /* Force Device Enumeration to FS/LS mode only */ + USBx_HOST->HCFG |= USB_OTG_HCFG_FSLSS; + } + else + { + /* Set default Max speed support */ + USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSS); + } + } + else + { + /* Set default Max speed support */ + USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSS); + } + + /* Make sure the FIFOs are flushed. */ + if (USB_FlushTxFifo(USBx, 0x10U) != HAL_OK) /* all Tx FIFOs */ + { + ret = HAL_ERROR; + } + + if (USB_FlushRxFifo(USBx) != HAL_OK) + { + ret = HAL_ERROR; + } + + /* Clear all pending HC Interrupts */ + for (i = 0U; i < cfg.Host_channels; i++) + { + USBx_HC(i)->HCINT = 0xFFFFFFFFU; + USBx_HC(i)->HCINTMSK = 0U; + } + + /* Disable all interrupts. */ + USBx->GINTMSK = 0U; + + /* Clear any pending interrupts */ + USBx->GINTSTS = 0xFFFFFFFFU; + + if ((USBx->CID & (0x1U << 8)) != 0U) + { + /* set Rx FIFO size */ + USBx->GRXFSIZ = 0x200U; + USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t)(((0x100U << 16) & USB_OTG_NPTXFD) | 0x200U); + USBx->HPTXFSIZ = (uint32_t)(((0xE0U << 16) & USB_OTG_HPTXFSIZ_PTXFD) | 0x300U); + } + else + { + /* set Rx FIFO size */ + USBx->GRXFSIZ = 0x80U; + USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t)(((0x60U << 16) & USB_OTG_NPTXFD) | 0x80U); + USBx->HPTXFSIZ = (uint32_t)(((0x40U << 16)& USB_OTG_HPTXFSIZ_PTXFD) | 0xE0U); + } + + /* Enable the common interrupts */ + if (cfg.dma_enable == 0U) + { + USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM; + } + + /* Enable interrupts matching to the Host mode ONLY */ + USBx->GINTMSK |= (USB_OTG_GINTMSK_PRTIM | USB_OTG_GINTMSK_HCIM | \ + USB_OTG_GINTMSK_SOFM | USB_OTG_GINTSTS_DISCINT | \ + USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM); + + return ret; +} + +/** + * @brief USB_InitFSLSPClkSel : Initializes the FSLSPClkSel field of the + * HCFG register on the PHY type and set the right frame interval + * @param USBx Selected device + * @param freq clock frequency + * This parameter can be one of these values: + * HCFG_48_MHZ : Full Speed 48 MHz Clock + * HCFG_6_MHZ : Low Speed 6 MHz Clock + * @retval HAL status + */ +HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx, uint8_t freq) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSPCS); + USBx_HOST->HCFG |= (uint32_t)freq & USB_OTG_HCFG_FSLSPCS; + + if (freq == HCFG_48_MHZ) + { + USBx_HOST->HFIR = 48000U; + } + else if (freq == HCFG_6_MHZ) + { + USBx_HOST->HFIR = 6000U; + } + else + { + /* ... */ + } + + return HAL_OK; +} + +/** + * @brief USB_OTG_ResetPort : Reset Host Port + * @param USBx Selected device + * @retval HAL status + * @note (1)The application must wait at least 10 ms + * before clearing the reset bit. + */ +HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + __IO uint32_t hprt0 = 0U; + + hprt0 = USBx_HPRT0; + + hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET | + USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG); + + USBx_HPRT0 = (USB_OTG_HPRT_PRST | hprt0); + HAL_Delay(100U); /* See Note #1 */ + USBx_HPRT0 = ((~USB_OTG_HPRT_PRST) & hprt0); + HAL_Delay(10U); + + return HAL_OK; +} + +/** + * @brief USB_DriveVbus : activate or de-activate vbus + * @param state VBUS state + * This parameter can be one of these values: + * 0 : Deactivate VBUS + * 1 : Activate VBUS + * @retval HAL status + */ +HAL_StatusTypeDef USB_DriveVbus(USB_OTG_GlobalTypeDef *USBx, uint8_t state) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + __IO uint32_t hprt0 = 0U; + + hprt0 = USBx_HPRT0; + + hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET | + USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG); + + if (((hprt0 & USB_OTG_HPRT_PPWR) == 0U) && (state == 1U)) + { + USBx_HPRT0 = (USB_OTG_HPRT_PPWR | hprt0); + } + if (((hprt0 & USB_OTG_HPRT_PPWR) == USB_OTG_HPRT_PPWR) && (state == 0U)) + { + USBx_HPRT0 = ((~USB_OTG_HPRT_PPWR) & hprt0); + } + return HAL_OK; +} + +/** + * @brief Return Host Core speed + * @param USBx Selected device + * @retval speed : Host speed + * This parameter can be one of these values: + * @arg HCD_SPEED_HIGH: High speed mode + * @arg HCD_SPEED_FULL: Full speed mode + * @arg HCD_SPEED_LOW: Low speed mode + */ +uint32_t USB_GetHostSpeed(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + __IO uint32_t hprt0 = 0U; + + hprt0 = USBx_HPRT0; + return ((hprt0 & USB_OTG_HPRT_PSPD) >> 17); +} + +/** + * @brief Return Host Current Frame number + * @param USBx Selected device + * @retval current frame number + */ +uint32_t USB_GetCurrentFrame(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + return (USBx_HOST->HFNUM & USB_OTG_HFNUM_FRNUM); +} + +/** + * @brief Initialize a host channel + * @param USBx Selected device + * @param ch_num Channel number + * This parameter can be a value from 1 to 15 + * @param epnum Endpoint number + * This parameter can be a value from 1 to 15 + * @param dev_address Current device address + * This parameter can be a value from 0 to 255 + * @param speed Current device speed + * This parameter can be one of these values: + * @arg USB_OTG_SPEED_HIGH: High speed mode + * @arg USB_OTG_SPEED_FULL: Full speed mode + * @arg USB_OTG_SPEED_LOW: Low speed mode + * @param ep_type Endpoint Type + * This parameter can be one of these values: + * @arg EP_TYPE_CTRL: Control type + * @arg EP_TYPE_ISOC: Isochronous type + * @arg EP_TYPE_BULK: Bulk type + * @arg EP_TYPE_INTR: Interrupt type + * @param mps Max Packet Size + * This parameter can be a value from 0 to 32K + * @retval HAL state + */ +HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num, + uint8_t epnum, uint8_t dev_address, uint8_t speed, + uint8_t ep_type, uint16_t mps) +{ + HAL_StatusTypeDef ret = HAL_OK; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t HCcharEpDir; + uint32_t HCcharLowSpeed; + uint32_t HostCoreSpeed; + + /* Clear old interrupt conditions for this host channel. */ + USBx_HC((uint32_t)ch_num)->HCINT = 0xFFFFFFFFU; + + /* Enable channel interrupts required for this transfer. */ + switch (ep_type) + { + case EP_TYPE_CTRL: + case EP_TYPE_BULK: + USBx_HC((uint32_t)ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM | + USB_OTG_HCINTMSK_STALLM | + USB_OTG_HCINTMSK_TXERRM | + USB_OTG_HCINTMSK_DTERRM | + USB_OTG_HCINTMSK_AHBERR | + USB_OTG_HCINTMSK_NAKM; + + if ((epnum & 0x80U) == 0x80U) + { + USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM; + } + else + { + if ((USBx->CID & (0x1U << 8)) != 0U) + { + USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_NYET | + USB_OTG_HCINTMSK_ACKM; + } + } + break; + + case EP_TYPE_INTR: + USBx_HC((uint32_t)ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM | + USB_OTG_HCINTMSK_STALLM | + USB_OTG_HCINTMSK_TXERRM | + USB_OTG_HCINTMSK_DTERRM | + USB_OTG_HCINTMSK_NAKM | + USB_OTG_HCINTMSK_AHBERR | + USB_OTG_HCINTMSK_FRMORM; + + if ((epnum & 0x80U) == 0x80U) + { + USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM; + } + + break; + + case EP_TYPE_ISOC: + USBx_HC((uint32_t)ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM | + USB_OTG_HCINTMSK_ACKM | + USB_OTG_HCINTMSK_AHBERR | + USB_OTG_HCINTMSK_FRMORM; + + if ((epnum & 0x80U) == 0x80U) + { + USBx_HC((uint32_t)ch_num)->HCINTMSK |= (USB_OTG_HCINTMSK_TXERRM | USB_OTG_HCINTMSK_BBERRM); + } + break; + + default: + ret = HAL_ERROR; + break; + } + + /* Enable host channel Halt interrupt */ + USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_CHHM; + + /* Enable the top level host channel interrupt. */ + USBx_HOST->HAINTMSK |= 1UL << (ch_num & 0xFU); + + /* Make sure host channel interrupts are enabled. */ + USBx->GINTMSK |= USB_OTG_GINTMSK_HCIM; + + /* Program the HCCHAR register */ + if ((epnum & 0x80U) == 0x80U) + { + HCcharEpDir = (0x1U << 15) & USB_OTG_HCCHAR_EPDIR; + } + else + { + HCcharEpDir = 0U; + } + + HostCoreSpeed = USB_GetHostSpeed(USBx); + + /* LS device plugged to HUB */ + if ((speed == HPRT0_PRTSPD_LOW_SPEED) && (HostCoreSpeed != HPRT0_PRTSPD_LOW_SPEED)) + { + HCcharLowSpeed = (0x1U << 17) & USB_OTG_HCCHAR_LSDEV; + } + else + { + HCcharLowSpeed = 0U; + } + + USBx_HC((uint32_t)ch_num)->HCCHAR = (((uint32_t)dev_address << 22) & USB_OTG_HCCHAR_DAD) | + ((((uint32_t)epnum & 0x7FU) << 11) & USB_OTG_HCCHAR_EPNUM) | + (((uint32_t)ep_type << 18) & USB_OTG_HCCHAR_EPTYP) | + ((uint32_t)mps & USB_OTG_HCCHAR_MPSIZ) | HCcharEpDir | HCcharLowSpeed; + + if ((ep_type == EP_TYPE_INTR) || (ep_type == EP_TYPE_ISOC)) + { + USBx_HC((uint32_t)ch_num)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM; + } + + return ret; +} + +/** + * @brief Start a transfer over a host channel + * @param USBx Selected device + * @param hc pointer to host channel structure + * @param dma USB dma enabled or disabled + * This parameter can be one of these values: + * 0 : DMA feature not used + * 1 : DMA feature used + * @retval HAL state + */ +HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t ch_num = (uint32_t)hc->ch_num; + __IO uint32_t tmpreg; + uint8_t is_oddframe; + uint16_t len_words; + uint16_t num_packets; + uint16_t max_hc_pkt_count = 256U; + + if (((USBx->CID & (0x1U << 8)) != 0U) && (hc->speed == USBH_HS_SPEED)) + { + /* in DMA mode host Core automatically issues ping in case of NYET/NAK */ + if ((dma == 1U) && ((hc->ep_type == EP_TYPE_CTRL) || (hc->ep_type == EP_TYPE_BULK))) + { + USBx_HC((uint32_t)ch_num)->HCINTMSK &= ~(USB_OTG_HCINTMSK_NYET | + USB_OTG_HCINTMSK_ACKM | + USB_OTG_HCINTMSK_NAKM); + } + + if ((dma == 0U) && (hc->do_ping == 1U)) + { + (void)USB_DoPing(USBx, hc->ch_num); + return HAL_OK; + } + + } + + /* Compute the expected number of packets associated to the transfer */ + if (hc->xfer_len > 0U) + { + num_packets = (uint16_t)((hc->xfer_len + hc->max_packet - 1U) / hc->max_packet); + + if (num_packets > max_hc_pkt_count) + { + num_packets = max_hc_pkt_count; + hc->XferSize = (uint32_t)num_packets * hc->max_packet; + } + } + else + { + num_packets = 1U; + } + + /* + * For IN channel HCTSIZ.XferSize is expected to be an integer multiple of + * max_packet size. + */ + if (hc->ep_is_in != 0U) + { + hc->XferSize = (uint32_t)num_packets * hc->max_packet; + } + else + { + hc->XferSize = hc->xfer_len; + } + + /* Initialize the HCTSIZn register */ + USBx_HC(ch_num)->HCTSIZ = (hc->XferSize & USB_OTG_HCTSIZ_XFRSIZ) | + (((uint32_t)num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) | + (((uint32_t)hc->data_pid << 29) & USB_OTG_HCTSIZ_DPID); + + if (dma != 0U) + { + /* xfer_buff MUST be 32-bits aligned */ + USBx_HC(ch_num)->HCDMA = (uint32_t)hc->xfer_buff; + } + + is_oddframe = (((uint32_t)USBx_HOST->HFNUM & 0x01U) != 0U) ? 0U : 1U; + USBx_HC(ch_num)->HCCHAR &= ~USB_OTG_HCCHAR_ODDFRM; + USBx_HC(ch_num)->HCCHAR |= (uint32_t)is_oddframe << 29; + + /* Set host channel enable */ + tmpreg = USBx_HC(ch_num)->HCCHAR; + tmpreg &= ~USB_OTG_HCCHAR_CHDIS; + + /* make sure to set the correct ep direction */ + if (hc->ep_is_in != 0U) + { + tmpreg |= USB_OTG_HCCHAR_EPDIR; + } + else + { + tmpreg &= ~USB_OTG_HCCHAR_EPDIR; + } + tmpreg |= USB_OTG_HCCHAR_CHENA; + USBx_HC(ch_num)->HCCHAR = tmpreg; + + if (dma != 0U) /* dma mode */ + { + return HAL_OK; + } + + if ((hc->ep_is_in == 0U) && (hc->xfer_len > 0U)) + { + switch (hc->ep_type) + { + /* Non periodic transfer */ + case EP_TYPE_CTRL: + case EP_TYPE_BULK: + + len_words = (uint16_t)((hc->xfer_len + 3U) / 4U); + + /* check if there is enough space in FIFO space */ + if (len_words > (USBx->HNPTXSTS & 0xFFFFU)) + { + /* need to process data in nptxfempty interrupt */ + USBx->GINTMSK |= USB_OTG_GINTMSK_NPTXFEM; + } + break; + + /* Periodic transfer */ + case EP_TYPE_INTR: + case EP_TYPE_ISOC: + len_words = (uint16_t)((hc->xfer_len + 3U) / 4U); + /* check if there is enough space in FIFO space */ + if (len_words > (USBx_HOST->HPTXSTS & 0xFFFFU)) /* split the transfer */ + { + /* need to process data in ptxfempty interrupt */ + USBx->GINTMSK |= USB_OTG_GINTMSK_PTXFEM; + } + break; + + default: + break; + } + + /* Write packet into the Tx FIFO. */ + (void)USB_WritePacket(USBx, hc->xfer_buff, hc->ch_num, (uint16_t)hc->xfer_len, 0); + } + + return HAL_OK; +} + +/** + * @brief Read all host channel interrupts status + * @param USBx Selected device + * @retval HAL state + */ +uint32_t USB_HC_ReadInterrupt(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + return ((USBx_HOST->HAINT) & 0xFFFFU); +} + +/** + * @brief Halt a host channel + * @param USBx Selected device + * @param hc_num Host Channel number + * This parameter can be a value from 1 to 15 + * @retval HAL state + */ +HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t hcnum = (uint32_t)hc_num; + __IO uint32_t count = 0U; + uint32_t HcEpType = (USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_EPTYP) >> 18; + uint32_t ChannelEna = (USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_CHENA) >> 31; + + if (((USBx->GAHBCFG & USB_OTG_GAHBCFG_DMAEN) == USB_OTG_GAHBCFG_DMAEN) && + (ChannelEna == 0U)) + { + return HAL_OK; + } + + /* Check for space in the request queue to issue the halt. */ + if ((HcEpType == HCCHAR_CTRL) || (HcEpType == HCCHAR_BULK)) + { + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHDIS; + + if ((USBx->GAHBCFG & USB_OTG_GAHBCFG_DMAEN) == 0U) + { + if ((USBx->HNPTXSTS & (0xFFU << 16)) == 0U) + { + USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA; + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + do + { + count++; + + if (count > 1000U) + { + break; + } + } while ((USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA); + } + else + { + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + } + } + } + else + { + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHDIS; + + if ((USBx_HOST->HPTXSTS & (0xFFU << 16)) == 0U) + { + USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA; + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + do + { + count++; + + if (count > 1000U) + { + break; + } + } while ((USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA); + } + else + { + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + } + } + + return HAL_OK; +} + +/** + * @brief Initiate Do Ping protocol + * @param USBx Selected device + * @param hc_num Host Channel number + * This parameter can be a value from 1 to 15 + * @retval HAL state + */ +HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t chnum = (uint32_t)ch_num; + uint32_t num_packets = 1U; + uint32_t tmpreg; + + USBx_HC(chnum)->HCTSIZ = ((num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) | + USB_OTG_HCTSIZ_DOPING; + + /* Set host channel enable */ + tmpreg = USBx_HC(chnum)->HCCHAR; + tmpreg &= ~USB_OTG_HCCHAR_CHDIS; + tmpreg |= USB_OTG_HCCHAR_CHENA; + USBx_HC(chnum)->HCCHAR = tmpreg; + + return HAL_OK; +} + +/** + * @brief Stop Host Core + * @param USBx Selected device + * @retval HAL state + */ +HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx) +{ + HAL_StatusTypeDef ret = HAL_OK; + uint32_t USBx_BASE = (uint32_t)USBx; + __IO uint32_t count = 0U; + uint32_t value; + uint32_t i; + + (void)USB_DisableGlobalInt(USBx); + + /* Flush USB FIFO */ + if (USB_FlushTxFifo(USBx, 0x10U) != HAL_OK) /* all Tx FIFOs */ + { + ret = HAL_ERROR; + } + + if (USB_FlushRxFifo(USBx) != HAL_OK) + { + ret = HAL_ERROR; + } + + /* Flush out any leftover queued requests. */ + for (i = 0U; i <= 15U; i++) + { + value = USBx_HC(i)->HCCHAR; + value |= USB_OTG_HCCHAR_CHDIS; + value &= ~USB_OTG_HCCHAR_CHENA; + value &= ~USB_OTG_HCCHAR_EPDIR; + USBx_HC(i)->HCCHAR = value; + } + + /* Halt all channels to put them into a known state. */ + for (i = 0U; i <= 15U; i++) + { + value = USBx_HC(i)->HCCHAR; + value |= USB_OTG_HCCHAR_CHDIS; + value |= USB_OTG_HCCHAR_CHENA; + value &= ~USB_OTG_HCCHAR_EPDIR; + USBx_HC(i)->HCCHAR = value; + + do + { + count++; + + if (count > 1000U) + { + break; + } + } while ((USBx_HC(i)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA); + } + + /* Clear any pending Host interrupts */ + USBx_HOST->HAINT = 0xFFFFFFFFU; + USBx->GINTSTS = 0xFFFFFFFFU; + + (void)USB_EnableGlobalInt(USBx); + + return ret; +} + +/** + * @brief USB_ActivateRemoteWakeup active remote wakeup signalling + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + if ((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS) + { + /* active Remote wakeup signalling */ + USBx_DEVICE->DCTL |= USB_OTG_DCTL_RWUSIG; + } + + return HAL_OK; +} + +/** + * @brief USB_DeActivateRemoteWakeup de-active remote wakeup signalling + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + /* active Remote wakeup signalling */ + USBx_DEVICE->DCTL &= ~(USB_OTG_DCTL_RWUSIG); + + return HAL_OK; +} +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +#endif /* defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) */ + +/** + * @} + */ diff --git a/Drivers/stm32f4xx_ll_usb.h b/libs/hal/stm32f4xx_ll_usb.h similarity index 97% rename from Drivers/stm32f4xx_ll_usb.h rename to libs/hal/stm32f4xx_ll_usb.h index a50d49d..a7114cd 100644 --- a/Drivers/stm32f4xx_ll_usb.h +++ b/libs/hal/stm32f4xx_ll_usb.h @@ -1,536 +1,536 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_usb.h - * @author MCD Application Team - * @brief Header file of USB Low Layer HAL module. - ****************************************************************************** - * @attention - * - * Copyright (c) 2016 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F4xx_LL_USB_H -#define STM32F4xx_LL_USB_H - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup USB_LL - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** - * @brief USB Mode definition - */ -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) - -typedef enum -{ - USB_DEVICE_MODE = 0, - USB_HOST_MODE = 1, - USB_DRD_MODE = 2 -} USB_OTG_ModeTypeDef; - -/** - * @brief URB States definition - */ -typedef enum -{ - URB_IDLE = 0, - URB_DONE, - URB_NOTREADY, - URB_NYET, - URB_ERROR, - URB_STALL -} USB_OTG_URBStateTypeDef; - -/** - * @brief Host channel States definition - */ -typedef enum -{ - HC_IDLE = 0, - HC_XFRC, - HC_HALTED, - HC_NAK, - HC_NYET, - HC_STALL, - HC_XACTERR, - HC_BBLERR, - HC_DATATGLERR -} USB_OTG_HCStateTypeDef; - - -/** - * @brief USB Instance Initialization Structure definition - */ -typedef struct -{ - uint32_t dev_endpoints; /*!< Device Endpoints number. - This parameter depends on the used USB core. - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint32_t Host_channels; /*!< Host Channels number. - This parameter Depends on the used USB core. - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint32_t speed; /*!< USB Core speed. - This parameter can be any value of @ref PCD_Speed/HCD_Speed - (HCD_SPEED_xxx, HCD_SPEED_xxx) */ - - uint32_t dma_enable; /*!< Enable or disable of the USB embedded DMA used only for OTG HS. */ - - uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. */ - - uint32_t phy_itface; /*!< Select the used PHY interface. - This parameter can be any value of @ref PCD_PHY_Module/HCD_PHY_Module */ - - uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ - - uint32_t low_power_enable; /*!< Enable or disable the low power mode. */ - - uint32_t lpm_enable; /*!< Enable or disable Link Power Management. */ - - uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */ - - uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */ - - uint32_t use_dedicated_ep1; /*!< Enable or disable the use of the dedicated EP1 interrupt. */ - - uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */ - -} USB_OTG_CfgTypeDef; - -typedef struct -{ - uint8_t num; /*!< Endpoint number - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint8_t is_in; /*!< Endpoint direction - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t is_stall; /*!< Endpoint stall condition - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t is_iso_incomplete; /*!< Endpoint isoc condition - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t type; /*!< Endpoint type - This parameter can be any value of @ref USB_LL_EP_Type */ - - uint8_t data_pid_start; /*!< Initial data PID - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t even_odd_frame; /*!< IFrame parity - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint16_t tx_fifo_num; /*!< Transmission FIFO number - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint32_t maxpacket; /*!< Endpoint Max packet size - This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ - - uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ - - uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */ - - uint32_t xfer_len; /*!< Current transfer length */ - - uint32_t xfer_size; /*!< requested transfer size */ - - uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ -} USB_OTG_EPTypeDef; - -typedef struct -{ - uint8_t dev_addr; /*!< USB device address. - This parameter must be a number between Min_Data = 1 and Max_Data = 255 */ - - uint8_t ch_num; /*!< Host channel number. - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint8_t ep_num; /*!< Endpoint number. - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint8_t ep_is_in; /*!< Endpoint direction - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t speed; /*!< USB Host Channel speed. - This parameter can be any value of @ref HCD_Device_Speed: - (HCD_DEVICE_SPEED_xxx) */ - - uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */ - - uint8_t process_ping; /*!< Execute the PING protocol for HS mode. */ - - uint8_t ep_type; /*!< Endpoint Type. - This parameter can be any value of @ref USB_LL_EP_Type */ - - uint16_t max_packet; /*!< Endpoint Max packet size. - This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ - - uint8_t data_pid; /*!< Initial data PID. - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */ - - uint32_t XferSize; /*!< OTG Channel transfer size. */ - - uint32_t xfer_len; /*!< Current transfer length. */ - - uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */ - - uint8_t toggle_in; /*!< IN transfer current toggle flag. - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t toggle_out; /*!< OUT transfer current toggle flag - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */ - - uint32_t ErrCnt; /*!< Host channel error count. */ - - USB_OTG_URBStateTypeDef urb_state; /*!< URB state. - This parameter can be any value of @ref USB_OTG_URBStateTypeDef */ - - USB_OTG_HCStateTypeDef state; /*!< Host Channel state. - This parameter can be any value of @ref USB_OTG_HCStateTypeDef */ -} USB_OTG_HCTypeDef; -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup PCD_Exported_Constants PCD Exported Constants - * @{ - */ - -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -/** @defgroup USB_OTG_CORE VERSION ID - * @{ - */ -#define USB_OTG_CORE_ID_300A 0x4F54300AU -#define USB_OTG_CORE_ID_310A 0x4F54310AU -/** - * @} - */ - -/** @defgroup USB_Core_Mode_ USB Core Mode - * @{ - */ -#define USB_OTG_MODE_DEVICE 0U -#define USB_OTG_MODE_HOST 1U -#define USB_OTG_MODE_DRD 2U -/** - * @} - */ - -/** @defgroup USB_LL Device Speed - * @{ - */ -#define USBD_HS_SPEED 0U -#define USBD_HSINFS_SPEED 1U -#define USBH_HS_SPEED 0U -#define USBD_FS_SPEED 2U -#define USBH_FSLS_SPEED 1U -/** - * @} - */ - -/** @defgroup USB_LL_Core_Speed USB Low Layer Core Speed - * @{ - */ -#define USB_OTG_SPEED_HIGH 0U -#define USB_OTG_SPEED_HIGH_IN_FULL 1U -#define USB_OTG_SPEED_FULL 3U -/** - * @} - */ - -/** @defgroup USB_LL_Core_PHY USB Low Layer Core PHY - * @{ - */ -#define USB_OTG_ULPI_PHY 1U -#define USB_OTG_EMBEDDED_PHY 2U -/** - * @} - */ - -/** @defgroup USB_LL_Turnaround_Timeout Turnaround Timeout Value - * @{ - */ -#ifndef USBD_HS_TRDT_VALUE -#define USBD_HS_TRDT_VALUE 9U -#endif /* USBD_HS_TRDT_VALUE */ -#ifndef USBD_FS_TRDT_VALUE -#define USBD_FS_TRDT_VALUE 5U -#define USBD_DEFAULT_TRDT_VALUE 9U -#endif /* USBD_HS_TRDT_VALUE */ -/** - * @} - */ - -/** @defgroup USB_LL_Core_MPS USB Low Layer Core MPS - * @{ - */ -#define USB_OTG_HS_MAX_PACKET_SIZE 512U -#define USB_OTG_FS_MAX_PACKET_SIZE 64U -#define USB_OTG_MAX_EP0_SIZE 64U -/** - * @} - */ - -/** @defgroup USB_LL_Core_PHY_Frequency USB Low Layer Core PHY Frequency - * @{ - */ -#define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ (0U << 1) -#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1U << 1) -#define DSTS_ENUMSPD_FS_PHY_48MHZ (3U << 1) -/** - * @} - */ - -/** @defgroup USB_LL_CORE_Frame_Interval USB Low Layer Core Frame Interval - * @{ - */ -#define DCFG_FRAME_INTERVAL_80 0U -#define DCFG_FRAME_INTERVAL_85 1U -#define DCFG_FRAME_INTERVAL_90 2U -#define DCFG_FRAME_INTERVAL_95 3U -/** - * @} - */ - -/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS - * @{ - */ -#define EP_MPS_64 0U -#define EP_MPS_32 1U -#define EP_MPS_16 2U -#define EP_MPS_8 3U -/** - * @} - */ - -/** @defgroup USB_LL_EP_Speed USB Low Layer EP Speed - * @{ - */ -#define EP_SPEED_LOW 0U -#define EP_SPEED_FULL 1U -#define EP_SPEED_HIGH 2U -/** - * @} - */ - -/** @defgroup USB_LL_EP_Type USB Low Layer EP Type - * @{ - */ -#define EP_TYPE_CTRL 0U -#define EP_TYPE_ISOC 1U -#define EP_TYPE_BULK 2U -#define EP_TYPE_INTR 3U -#define EP_TYPE_MSK 3U -/** - * @} - */ - -/** @defgroup USB_LL_STS_Defines USB Low Layer STS Defines - * @{ - */ -#define STS_GOUT_NAK 1U -#define STS_DATA_UPDT 2U -#define STS_XFER_COMP 3U -#define STS_SETUP_COMP 4U -#define STS_SETUP_UPDT 6U -/** - * @} - */ - -/** @defgroup USB_LL_HCFG_SPEED_Defines USB Low Layer HCFG Speed Defines - * @{ - */ -#define HCFG_30_60_MHZ 0U -#define HCFG_48_MHZ 1U -#define HCFG_6_MHZ 2U -/** - * @} - */ - -/** @defgroup USB_LL_HPRT0_PRTSPD_SPEED_Defines USB Low Layer HPRT0 PRTSPD Speed Defines - * @{ - */ -#define HPRT0_PRTSPD_HIGH_SPEED 0U -#define HPRT0_PRTSPD_FULL_SPEED 1U -#define HPRT0_PRTSPD_LOW_SPEED 2U -/** - * @} - */ - -#define HCCHAR_CTRL 0U -#define HCCHAR_ISOC 1U -#define HCCHAR_BULK 2U -#define HCCHAR_INTR 3U - -#define HC_PID_DATA0 0U -#define HC_PID_DATA2 1U -#define HC_PID_DATA1 2U -#define HC_PID_SETUP 3U - -#define GRXSTS_PKTSTS_IN 2U -#define GRXSTS_PKTSTS_IN_XFER_COMP 3U -#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5U -#define GRXSTS_PKTSTS_CH_HALTED 7U - -#define TEST_J 1U -#define TEST_K 2U -#define TEST_SE0_NAK 3U -#define TEST_PACKET 4U -#define TEST_FORCE_EN 5U - -#define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_PCGCCTL_BASE) -#define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_HOST_PORT_BASE) - -#define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)(USBx_BASE + USB_OTG_DEVICE_BASE)) -#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)(USBx_BASE\ - + USB_OTG_IN_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE))) - -#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)(USBx_BASE\ - + USB_OTG_OUT_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE))) - -#define USBx_DFIFO(i) *(__IO uint32_t *)(USBx_BASE + USB_OTG_FIFO_BASE + ((i) * USB_OTG_FIFO_SIZE)) - -#define USBx_HOST ((USB_OTG_HostTypeDef *)(USBx_BASE + USB_OTG_HOST_BASE)) -#define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)(USBx_BASE\ - + USB_OTG_HOST_CHANNEL_BASE\ - + ((i) * USB_OTG_HOST_CHANNEL_SIZE))) - -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - -#define EP_ADDR_MSK 0xFU - -#ifndef USE_USB_DOUBLE_BUFFER -#define USE_USB_DOUBLE_BUFFER 1U -#endif /* USE_USB_DOUBLE_BUFFER */ -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup USB_LL_Exported_Macros USB Low Layer Exported Macros - * @{ - */ -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -#define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__)) -#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__)) - -#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__)) -#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__)) -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions - * @{ - */ -#if defined (USB_OTG_FS) || defined (USB_OTG_HS) -HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); -HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); -HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_SetTurnaroundTime(USB_OTG_GlobalTypeDef *USBx, uint32_t hclk, uint8_t speed); -HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_OTG_ModeTypeDef mode); -HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx, uint8_t speed); -HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_FlushTxFifo(USB_OTG_GlobalTypeDef *USBx, uint32_t num); -HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma); -HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma); -HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, - uint8_t ch_ep_num, uint16_t len, uint8_t dma); - -void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len); -HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_EPStopXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_SetDevAddress(USB_OTG_GlobalTypeDef *USBx, uint8_t address); -HAL_StatusTypeDef USB_DevConnect(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_DevDisconnect(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_ActivateSetup(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup); -uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_ReadInterrupts(USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_ReadDevAllOutEpInterrupt(USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_ReadDevOutEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum); -uint32_t USB_ReadDevAllInEpInterrupt(USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_ReadDevInEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum); -void USB_ClearInterrupts(USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt); - -HAL_StatusTypeDef USB_HostInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); -HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx, uint8_t freq); -HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_DriveVbus(USB_OTG_GlobalTypeDef *USBx, uint8_t state); -uint32_t USB_GetHostSpeed(USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_GetCurrentFrame(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num, - uint8_t epnum, uint8_t dev_address, uint8_t speed, - uint8_t ep_type, uint16_t mps); -HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, - USB_OTG_HCTypeDef *hc, uint8_t dma); - -uint32_t USB_HC_ReadInterrupt(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num); -HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num); -HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx); -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - - -#endif /* STM32F4xx_LL_USB_H */ +/** + ****************************************************************************** + * @file stm32f4xx_ll_usb.h + * @author MCD Application Team + * @brief Header file of USB Low Layer HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32F4xx_LL_USB_H +#define STM32F4xx_LL_USB_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup USB_LL + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief USB Mode definition + */ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) + +typedef enum +{ + USB_DEVICE_MODE = 0, + USB_HOST_MODE = 1, + USB_DRD_MODE = 2 +} USB_OTG_ModeTypeDef; + +/** + * @brief URB States definition + */ +typedef enum +{ + URB_IDLE = 0, + URB_DONE, + URB_NOTREADY, + URB_NYET, + URB_ERROR, + URB_STALL +} USB_OTG_URBStateTypeDef; + +/** + * @brief Host channel States definition + */ +typedef enum +{ + HC_IDLE = 0, + HC_XFRC, + HC_HALTED, + HC_NAK, + HC_NYET, + HC_STALL, + HC_XACTERR, + HC_BBLERR, + HC_DATATGLERR +} USB_OTG_HCStateTypeDef; + + +/** + * @brief USB Instance Initialization Structure definition + */ +typedef struct +{ + uint32_t dev_endpoints; /*!< Device Endpoints number. + This parameter depends on the used USB core. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint32_t Host_channels; /*!< Host Channels number. + This parameter Depends on the used USB core. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint32_t speed; /*!< USB Core speed. + This parameter can be any value of @ref PCD_Speed/HCD_Speed + (HCD_SPEED_xxx, HCD_SPEED_xxx) */ + + uint32_t dma_enable; /*!< Enable or disable of the USB embedded DMA used only for OTG HS. */ + + uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. */ + + uint32_t phy_itface; /*!< Select the used PHY interface. + This parameter can be any value of @ref PCD_PHY_Module/HCD_PHY_Module */ + + uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ + + uint32_t low_power_enable; /*!< Enable or disable the low power mode. */ + + uint32_t lpm_enable; /*!< Enable or disable Link Power Management. */ + + uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */ + + uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */ + + uint32_t use_dedicated_ep1; /*!< Enable or disable the use of the dedicated EP1 interrupt. */ + + uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */ + +} USB_OTG_CfgTypeDef; + +typedef struct +{ + uint8_t num; /*!< Endpoint number + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t is_in; /*!< Endpoint direction + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t is_stall; /*!< Endpoint stall condition + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t is_iso_incomplete; /*!< Endpoint isoc condition + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t type; /*!< Endpoint type + This parameter can be any value of @ref USB_LL_EP_Type */ + + uint8_t data_pid_start; /*!< Initial data PID + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t even_odd_frame; /*!< IFrame parity + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint16_t tx_fifo_num; /*!< Transmission FIFO number + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint32_t maxpacket; /*!< Endpoint Max packet size + This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ + + uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ + + uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */ + + uint32_t xfer_len; /*!< Current transfer length */ + + uint32_t xfer_size; /*!< requested transfer size */ + + uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ +} USB_OTG_EPTypeDef; + +typedef struct +{ + uint8_t dev_addr; /*!< USB device address. + This parameter must be a number between Min_Data = 1 and Max_Data = 255 */ + + uint8_t ch_num; /*!< Host channel number. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t ep_num; /*!< Endpoint number. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t ep_is_in; /*!< Endpoint direction + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t speed; /*!< USB Host Channel speed. + This parameter can be any value of @ref HCD_Device_Speed: + (HCD_DEVICE_SPEED_xxx) */ + + uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */ + + uint8_t process_ping; /*!< Execute the PING protocol for HS mode. */ + + uint8_t ep_type; /*!< Endpoint Type. + This parameter can be any value of @ref USB_LL_EP_Type */ + + uint16_t max_packet; /*!< Endpoint Max packet size. + This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ + + uint8_t data_pid; /*!< Initial data PID. + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */ + + uint32_t XferSize; /*!< OTG Channel transfer size. */ + + uint32_t xfer_len; /*!< Current transfer length. */ + + uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */ + + uint8_t toggle_in; /*!< IN transfer current toggle flag. + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t toggle_out; /*!< OUT transfer current toggle flag + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */ + + uint32_t ErrCnt; /*!< Host channel error count. */ + + USB_OTG_URBStateTypeDef urb_state; /*!< URB state. + This parameter can be any value of @ref USB_OTG_URBStateTypeDef */ + + USB_OTG_HCStateTypeDef state; /*!< Host Channel state. + This parameter can be any value of @ref USB_OTG_HCStateTypeDef */ +} USB_OTG_HCTypeDef; +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PCD_Exported_Constants PCD Exported Constants + * @{ + */ + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** @defgroup USB_OTG_CORE VERSION ID + * @{ + */ +#define USB_OTG_CORE_ID_300A 0x4F54300AU +#define USB_OTG_CORE_ID_310A 0x4F54310AU +/** + * @} + */ + +/** @defgroup USB_Core_Mode_ USB Core Mode + * @{ + */ +#define USB_OTG_MODE_DEVICE 0U +#define USB_OTG_MODE_HOST 1U +#define USB_OTG_MODE_DRD 2U +/** + * @} + */ + +/** @defgroup USB_LL Device Speed + * @{ + */ +#define USBD_HS_SPEED 0U +#define USBD_HSINFS_SPEED 1U +#define USBH_HS_SPEED 0U +#define USBD_FS_SPEED 2U +#define USBH_FSLS_SPEED 1U +/** + * @} + */ + +/** @defgroup USB_LL_Core_Speed USB Low Layer Core Speed + * @{ + */ +#define USB_OTG_SPEED_HIGH 0U +#define USB_OTG_SPEED_HIGH_IN_FULL 1U +#define USB_OTG_SPEED_FULL 3U +/** + * @} + */ + +/** @defgroup USB_LL_Core_PHY USB Low Layer Core PHY + * @{ + */ +#define USB_OTG_ULPI_PHY 1U +#define USB_OTG_EMBEDDED_PHY 2U +/** + * @} + */ + +/** @defgroup USB_LL_Turnaround_Timeout Turnaround Timeout Value + * @{ + */ +#ifndef USBD_HS_TRDT_VALUE +#define USBD_HS_TRDT_VALUE 9U +#endif /* USBD_HS_TRDT_VALUE */ +#ifndef USBD_FS_TRDT_VALUE +#define USBD_FS_TRDT_VALUE 5U +#define USBD_DEFAULT_TRDT_VALUE 9U +#endif /* USBD_HS_TRDT_VALUE */ +/** + * @} + */ + +/** @defgroup USB_LL_Core_MPS USB Low Layer Core MPS + * @{ + */ +#define USB_OTG_HS_MAX_PACKET_SIZE 512U +#define USB_OTG_FS_MAX_PACKET_SIZE 64U +#define USB_OTG_MAX_EP0_SIZE 64U +/** + * @} + */ + +/** @defgroup USB_LL_Core_PHY_Frequency USB Low Layer Core PHY Frequency + * @{ + */ +#define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ (0U << 1) +#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1U << 1) +#define DSTS_ENUMSPD_FS_PHY_48MHZ (3U << 1) +/** + * @} + */ + +/** @defgroup USB_LL_CORE_Frame_Interval USB Low Layer Core Frame Interval + * @{ + */ +#define DCFG_FRAME_INTERVAL_80 0U +#define DCFG_FRAME_INTERVAL_85 1U +#define DCFG_FRAME_INTERVAL_90 2U +#define DCFG_FRAME_INTERVAL_95 3U +/** + * @} + */ + +/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS + * @{ + */ +#define EP_MPS_64 0U +#define EP_MPS_32 1U +#define EP_MPS_16 2U +#define EP_MPS_8 3U +/** + * @} + */ + +/** @defgroup USB_LL_EP_Speed USB Low Layer EP Speed + * @{ + */ +#define EP_SPEED_LOW 0U +#define EP_SPEED_FULL 1U +#define EP_SPEED_HIGH 2U +/** + * @} + */ + +/** @defgroup USB_LL_EP_Type USB Low Layer EP Type + * @{ + */ +#define EP_TYPE_CTRL 0U +#define EP_TYPE_ISOC 1U +#define EP_TYPE_BULK 2U +#define EP_TYPE_INTR 3U +#define EP_TYPE_MSK 3U +/** + * @} + */ + +/** @defgroup USB_LL_STS_Defines USB Low Layer STS Defines + * @{ + */ +#define STS_GOUT_NAK 1U +#define STS_DATA_UPDT 2U +#define STS_XFER_COMP 3U +#define STS_SETUP_COMP 4U +#define STS_SETUP_UPDT 6U +/** + * @} + */ + +/** @defgroup USB_LL_HCFG_SPEED_Defines USB Low Layer HCFG Speed Defines + * @{ + */ +#define HCFG_30_60_MHZ 0U +#define HCFG_48_MHZ 1U +#define HCFG_6_MHZ 2U +/** + * @} + */ + +/** @defgroup USB_LL_HPRT0_PRTSPD_SPEED_Defines USB Low Layer HPRT0 PRTSPD Speed Defines + * @{ + */ +#define HPRT0_PRTSPD_HIGH_SPEED 0U +#define HPRT0_PRTSPD_FULL_SPEED 1U +#define HPRT0_PRTSPD_LOW_SPEED 2U +/** + * @} + */ + +#define HCCHAR_CTRL 0U +#define HCCHAR_ISOC 1U +#define HCCHAR_BULK 2U +#define HCCHAR_INTR 3U + +#define HC_PID_DATA0 0U +#define HC_PID_DATA2 1U +#define HC_PID_DATA1 2U +#define HC_PID_SETUP 3U + +#define GRXSTS_PKTSTS_IN 2U +#define GRXSTS_PKTSTS_IN_XFER_COMP 3U +#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5U +#define GRXSTS_PKTSTS_CH_HALTED 7U + +#define TEST_J 1U +#define TEST_K 2U +#define TEST_SE0_NAK 3U +#define TEST_PACKET 4U +#define TEST_FORCE_EN 5U + +#define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_PCGCCTL_BASE) +#define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_HOST_PORT_BASE) + +#define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)(USBx_BASE + USB_OTG_DEVICE_BASE)) +#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)(USBx_BASE\ + + USB_OTG_IN_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE))) + +#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)(USBx_BASE\ + + USB_OTG_OUT_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE))) + +#define USBx_DFIFO(i) *(__IO uint32_t *)(USBx_BASE + USB_OTG_FIFO_BASE + ((i) * USB_OTG_FIFO_SIZE)) + +#define USBx_HOST ((USB_OTG_HostTypeDef *)(USBx_BASE + USB_OTG_HOST_BASE)) +#define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)(USBx_BASE\ + + USB_OTG_HOST_CHANNEL_BASE\ + + ((i) * USB_OTG_HOST_CHANNEL_SIZE))) + +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +#define EP_ADDR_MSK 0xFU + +#ifndef USE_USB_DOUBLE_BUFFER +#define USE_USB_DOUBLE_BUFFER 1U +#endif /* USE_USB_DOUBLE_BUFFER */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup USB_LL_Exported_Macros USB Low Layer Exported Macros + * @{ + */ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +#define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__)) +#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__)) + +#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__)) +#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__)) +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions + * @{ + */ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); +HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); +HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_SetTurnaroundTime(USB_OTG_GlobalTypeDef *USBx, uint32_t hclk, uint8_t speed); +HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_OTG_ModeTypeDef mode); +HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx, uint8_t speed); +HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_FlushTxFifo(USB_OTG_GlobalTypeDef *USBx, uint32_t num); +HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma); +HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma); +HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, + uint8_t ch_ep_num, uint16_t len, uint8_t dma); + +void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len); +HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPStopXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_SetDevAddress(USB_OTG_GlobalTypeDef *USBx, uint8_t address); +HAL_StatusTypeDef USB_DevConnect(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_DevDisconnect(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_ActivateSetup(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup); +uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_ReadInterrupts(USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_ReadDevAllOutEpInterrupt(USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_ReadDevOutEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum); +uint32_t USB_ReadDevAllInEpInterrupt(USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_ReadDevInEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum); +void USB_ClearInterrupts(USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt); + +HAL_StatusTypeDef USB_HostInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); +HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx, uint8_t freq); +HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_DriveVbus(USB_OTG_GlobalTypeDef *USBx, uint8_t state); +uint32_t USB_GetHostSpeed(USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_GetCurrentFrame(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num, + uint8_t epnum, uint8_t dev_address, uint8_t speed, + uint8_t ep_type, uint16_t mps); +HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, + USB_OTG_HCTypeDef *hc, uint8_t dma); + +uint32_t USB_HC_ReadInterrupt(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num); +HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num); +HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx); +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + + +#endif /* STM32F4xx_LL_USB_H */ diff --git a/Drivers/stm32f4xx_ll_utils.h b/libs/hal/stm32f4xx_ll_utils.h similarity index 97% rename from Drivers/stm32f4xx_ll_utils.h rename to libs/hal/stm32f4xx_ll_utils.h index 8b6cdfe..2b254a1 100644 --- a/Drivers/stm32f4xx_ll_utils.h +++ b/libs/hal/stm32f4xx_ll_utils.h @@ -1,307 +1,307 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_utils.h - * @author MCD Application Team - * @brief Header file of UTILS LL module. - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The LL UTILS driver contains a set of generic APIs that can be - used by user: - (+) Device electronic signature - (+) Timing functions - (+) PLL configuration functions - - @endverbatim - ****************************************************************************** - * @attention - * - * Copyright (c) 2017 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_UTILS_H -#define __STM32F4xx_LL_UTILS_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" - -/** @addtogroup STM32F4xx_LL_Driver - * @{ - */ - -/** @defgroup UTILS_LL UTILS - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup UTILS_LL_Private_Constants UTILS Private Constants - * @{ - */ - -/* Max delay can be used in LL_mDelay */ -#define LL_MAX_DELAY 0xFFFFFFFFU - -/** - * @brief Unique device ID register base address - */ -#define UID_BASE_ADDRESS UID_BASE - -/** - * @brief Flash size data register base address - */ -#define FLASHSIZE_BASE_ADDRESS FLASHSIZE_BASE - -/** - * @brief Package data register base address - */ -#define PACKAGE_BASE_ADDRESS PACKAGE_BASE - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup UTILS_LL_Private_Macros UTILS Private Macros - * @{ - */ -/** - * @} - */ -/* Exported types ------------------------------------------------------------*/ -/** @defgroup UTILS_LL_ES_INIT UTILS Exported structures - * @{ - */ -/** - * @brief UTILS PLL structure definition - */ -typedef struct -{ - uint32_t PLLM; /*!< Division factor for PLL VCO input clock. - This parameter can be a value of @ref RCC_LL_EC_PLLM_DIV - - This feature can be modified afterwards using unitary function - @ref LL_RCC_PLL_ConfigDomain_SYS(). */ - - uint32_t PLLN; /*!< Multiplication factor for PLL VCO output clock. - This parameter must be a number between Min_Data = @ref RCC_PLLN_MIN_VALUE - and Max_Data = @ref RCC_PLLN_MIN_VALUE - - This feature can be modified afterwards using unitary function - @ref LL_RCC_PLL_ConfigDomain_SYS(). */ - - uint32_t PLLP; /*!< Division for the main system clock. - This parameter can be a value of @ref RCC_LL_EC_PLLP_DIV - - This feature can be modified afterwards using unitary function - @ref LL_RCC_PLL_ConfigDomain_SYS(). */ -} LL_UTILS_PLLInitTypeDef; - -/** - * @brief UTILS System, AHB and APB buses clock configuration structure definition - */ -typedef struct -{ - uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). - This parameter can be a value of @ref RCC_LL_EC_SYSCLK_DIV - - This feature can be modified afterwards using unitary function - @ref LL_RCC_SetAHBPrescaler(). */ - - uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). - This parameter can be a value of @ref RCC_LL_EC_APB1_DIV - - This feature can be modified afterwards using unitary function - @ref LL_RCC_SetAPB1Prescaler(). */ - - uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK). - This parameter can be a value of @ref RCC_LL_EC_APB2_DIV - - This feature can be modified afterwards using unitary function - @ref LL_RCC_SetAPB2Prescaler(). */ - -} LL_UTILS_ClkInitTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup UTILS_LL_Exported_Constants UTILS Exported Constants - * @{ - */ - -/** @defgroup UTILS_EC_HSE_BYPASS HSE Bypass activation - * @{ - */ -#define LL_UTILS_HSEBYPASS_OFF 0x00000000U /*!< HSE Bypass is not enabled */ -#define LL_UTILS_HSEBYPASS_ON 0x00000001U /*!< HSE Bypass is enabled */ -/** - * @} - */ - -/** @defgroup UTILS_EC_PACKAGETYPE PACKAGE TYPE - * @{ - */ -#define LL_UTILS_PACKAGETYPE_WLCSP36_UFQFPN48_LQFP64 0x00000000U /*!< WLCSP36 or UFQFPN48 or LQFP64 package type */ -#define LL_UTILS_PACKAGETYPE_WLCSP168_FBGA169_LQFP100_LQFP64_UFQFPN48 0x00000100U /*!< WLCSP168 or FBGA169 or LQFP100 or LQFP64 or UFQFPN48 package type */ -#define LL_UTILS_PACKAGETYPE_WLCSP64_WLCSP81_LQFP176_UFBGA176 0x00000200U /*!< WLCSP64 or WLCSP81 or LQFP176 or UFBGA176 package type */ -#define LL_UTILS_PACKAGETYPE_LQFP144_UFBGA144_UFBGA144_UFBGA100 0x00000300U /*!< LQFP144 or UFBGA144 or UFBGA144 or UFBGA100 package type */ -#define LL_UTILS_PACKAGETYPE_LQFP100_LQFP208_TFBGA216 0x00000400U /*!< LQFP100 or LQFP208 or TFBGA216 package type */ -#define LL_UTILS_PACKAGETYPE_LQFP208_TFBGA216 0x00000500U /*!< LQFP208 or TFBGA216 package type */ -#define LL_UTILS_PACKAGETYPE_TQFP64_UFBGA144_LQFP144 0x00000700U /*!< TQFP64 or UFBGA144 or LQFP144 package type */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup UTILS_LL_Exported_Functions UTILS Exported Functions - * @{ - */ - -/** @defgroup UTILS_EF_DEVICE_ELECTRONIC_SIGNATURE DEVICE ELECTRONIC SIGNATURE - * @{ - */ - -/** - * @brief Get Word0 of the unique device identifier (UID based on 96 bits) - * @retval UID[31:0] - */ -__STATIC_INLINE uint32_t LL_GetUID_Word0(void) -{ - return (uint32_t)(READ_REG(*((uint32_t *)UID_BASE_ADDRESS))); -} - -/** - * @brief Get Word1 of the unique device identifier (UID based on 96 bits) - * @retval UID[63:32] - */ -__STATIC_INLINE uint32_t LL_GetUID_Word1(void) -{ - return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 4U)))); -} - -/** - * @brief Get Word2 of the unique device identifier (UID based on 96 bits) - * @retval UID[95:64] - */ -__STATIC_INLINE uint32_t LL_GetUID_Word2(void) -{ - return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 8U)))); -} - -/** - * @brief Get Flash memory size - * @note This bitfield indicates the size of the device Flash memory expressed in - * Kbytes. As an example, 0x040 corresponds to 64 Kbytes. - * @retval FLASH_SIZE[15:0]: Flash memory size - */ -__STATIC_INLINE uint32_t LL_GetFlashSize(void) -{ - return (uint32_t)(READ_REG(*((uint32_t *)FLASHSIZE_BASE_ADDRESS)) & 0xFFFF); -} - -/** - * @brief Get Package type - * @retval Returned value can be one of the following values: - * @arg @ref LL_UTILS_PACKAGETYPE_WLCSP36_UFQFPN48_LQFP64 (*) - * @arg @ref LL_UTILS_PACKAGETYPE_WLCSP168_FBGA169_LQFP100_LQFP64_UFQFPN48 (*) - * @arg @ref LL_UTILS_PACKAGETYPE_WLCSP64_WLCSP81_LQFP176_UFBGA176 (*) - * @arg @ref LL_UTILS_PACKAGETYPE_LQFP144_UFBGA144_UFBGA144_UFBGA100 (*) - * @arg @ref LL_UTILS_PACKAGETYPE_LQFP100_LQFP208_TFBGA216 (*) - * @arg @ref LL_UTILS_PACKAGETYPE_LQFP208_TFBGA216 (*) - * @arg @ref LL_UTILS_PACKAGETYPE_TQFP64_UFBGA144_LQFP144 (*) - * - * (*) value not defined in all devices. - */ -__STATIC_INLINE uint32_t LL_GetPackageType(void) -{ - return (uint32_t)(READ_REG(*((uint32_t *)PACKAGE_BASE_ADDRESS)) & 0x0700U); -} - -/** - * @} - */ - -/** @defgroup UTILS_LL_EF_DELAY DELAY - * @{ - */ - -/** - * @brief This function configures the Cortex-M SysTick source of the time base. - * @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro) - * @note When a RTOS is used, it is recommended to avoid changing the SysTick - * configuration by calling this function, for a delay use rather osDelay RTOS service. - * @param Ticks Number of ticks - * @retval None - */ -__STATIC_INLINE void LL_InitTick(uint32_t HCLKFrequency, uint32_t Ticks) -{ - /* Configure the SysTick to have interrupt in 1ms time base */ - SysTick->LOAD = (uint32_t)((HCLKFrequency / Ticks) - 1UL); /* set reload register */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable the Systick Timer */ -} - -void LL_Init1msTick(uint32_t HCLKFrequency); -void LL_mDelay(uint32_t Delay); - -/** - * @} - */ - -/** @defgroup UTILS_EF_SYSTEM SYSTEM - * @{ - */ - -void LL_SetSystemCoreClock(uint32_t HCLKFrequency); -ErrorStatus LL_SetFlashLatency(uint32_t HCLK_Frequency); -ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, - LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); -ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass, - LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_UTILS_H */ +/** + ****************************************************************************** + * @file stm32f4xx_ll_utils.h + * @author MCD Application Team + * @brief Header file of UTILS LL module. + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL UTILS driver contains a set of generic APIs that can be + used by user: + (+) Device electronic signature + (+) Timing functions + (+) PLL configuration functions + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_LL_UTILS_H +#define __STM32F4xx_LL_UTILS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_LL_Driver + * @{ + */ + +/** @defgroup UTILS_LL UTILS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup UTILS_LL_Private_Constants UTILS Private Constants + * @{ + */ + +/* Max delay can be used in LL_mDelay */ +#define LL_MAX_DELAY 0xFFFFFFFFU + +/** + * @brief Unique device ID register base address + */ +#define UID_BASE_ADDRESS UID_BASE + +/** + * @brief Flash size data register base address + */ +#define FLASHSIZE_BASE_ADDRESS FLASHSIZE_BASE + +/** + * @brief Package data register base address + */ +#define PACKAGE_BASE_ADDRESS PACKAGE_BASE + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UTILS_LL_Private_Macros UTILS Private Macros + * @{ + */ +/** + * @} + */ +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UTILS_LL_ES_INIT UTILS Exported structures + * @{ + */ +/** + * @brief UTILS PLL structure definition + */ +typedef struct +{ + uint32_t PLLM; /*!< Division factor for PLL VCO input clock. + This parameter can be a value of @ref RCC_LL_EC_PLLM_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL_ConfigDomain_SYS(). */ + + uint32_t PLLN; /*!< Multiplication factor for PLL VCO output clock. + This parameter must be a number between Min_Data = @ref RCC_PLLN_MIN_VALUE + and Max_Data = @ref RCC_PLLN_MIN_VALUE + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL_ConfigDomain_SYS(). */ + + uint32_t PLLP; /*!< Division for the main system clock. + This parameter can be a value of @ref RCC_LL_EC_PLLP_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL_ConfigDomain_SYS(). */ +} LL_UTILS_PLLInitTypeDef; + +/** + * @brief UTILS System, AHB and APB buses clock configuration structure definition + */ +typedef struct +{ + uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). + This parameter can be a value of @ref RCC_LL_EC_SYSCLK_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAHBPrescaler(). */ + + uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_LL_EC_APB1_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAPB1Prescaler(). */ + + uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_LL_EC_APB2_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAPB2Prescaler(). */ + +} LL_UTILS_ClkInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UTILS_LL_Exported_Constants UTILS Exported Constants + * @{ + */ + +/** @defgroup UTILS_EC_HSE_BYPASS HSE Bypass activation + * @{ + */ +#define LL_UTILS_HSEBYPASS_OFF 0x00000000U /*!< HSE Bypass is not enabled */ +#define LL_UTILS_HSEBYPASS_ON 0x00000001U /*!< HSE Bypass is enabled */ +/** + * @} + */ + +/** @defgroup UTILS_EC_PACKAGETYPE PACKAGE TYPE + * @{ + */ +#define LL_UTILS_PACKAGETYPE_WLCSP36_UFQFPN48_LQFP64 0x00000000U /*!< WLCSP36 or UFQFPN48 or LQFP64 package type */ +#define LL_UTILS_PACKAGETYPE_WLCSP168_FBGA169_LQFP100_LQFP64_UFQFPN48 0x00000100U /*!< WLCSP168 or FBGA169 or LQFP100 or LQFP64 or UFQFPN48 package type */ +#define LL_UTILS_PACKAGETYPE_WLCSP64_WLCSP81_LQFP176_UFBGA176 0x00000200U /*!< WLCSP64 or WLCSP81 or LQFP176 or UFBGA176 package type */ +#define LL_UTILS_PACKAGETYPE_LQFP144_UFBGA144_UFBGA144_UFBGA100 0x00000300U /*!< LQFP144 or UFBGA144 or UFBGA144 or UFBGA100 package type */ +#define LL_UTILS_PACKAGETYPE_LQFP100_LQFP208_TFBGA216 0x00000400U /*!< LQFP100 or LQFP208 or TFBGA216 package type */ +#define LL_UTILS_PACKAGETYPE_LQFP208_TFBGA216 0x00000500U /*!< LQFP208 or TFBGA216 package type */ +#define LL_UTILS_PACKAGETYPE_TQFP64_UFBGA144_LQFP144 0x00000700U /*!< TQFP64 or UFBGA144 or LQFP144 package type */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup UTILS_LL_Exported_Functions UTILS Exported Functions + * @{ + */ + +/** @defgroup UTILS_EF_DEVICE_ELECTRONIC_SIGNATURE DEVICE ELECTRONIC SIGNATURE + * @{ + */ + +/** + * @brief Get Word0 of the unique device identifier (UID based on 96 bits) + * @retval UID[31:0] + */ +__STATIC_INLINE uint32_t LL_GetUID_Word0(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)UID_BASE_ADDRESS))); +} + +/** + * @brief Get Word1 of the unique device identifier (UID based on 96 bits) + * @retval UID[63:32] + */ +__STATIC_INLINE uint32_t LL_GetUID_Word1(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 4U)))); +} + +/** + * @brief Get Word2 of the unique device identifier (UID based on 96 bits) + * @retval UID[95:64] + */ +__STATIC_INLINE uint32_t LL_GetUID_Word2(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 8U)))); +} + +/** + * @brief Get Flash memory size + * @note This bitfield indicates the size of the device Flash memory expressed in + * Kbytes. As an example, 0x040 corresponds to 64 Kbytes. + * @retval FLASH_SIZE[15:0]: Flash memory size + */ +__STATIC_INLINE uint32_t LL_GetFlashSize(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)FLASHSIZE_BASE_ADDRESS)) & 0xFFFF); +} + +/** + * @brief Get Package type + * @retval Returned value can be one of the following values: + * @arg @ref LL_UTILS_PACKAGETYPE_WLCSP36_UFQFPN48_LQFP64 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_WLCSP168_FBGA169_LQFP100_LQFP64_UFQFPN48 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_WLCSP64_WLCSP81_LQFP176_UFBGA176 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP144_UFBGA144_UFBGA144_UFBGA100 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP100_LQFP208_TFBGA216 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP208_TFBGA216 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_TQFP64_UFBGA144_LQFP144 (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_GetPackageType(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)PACKAGE_BASE_ADDRESS)) & 0x0700U); +} + +/** + * @} + */ + +/** @defgroup UTILS_LL_EF_DELAY DELAY + * @{ + */ + +/** + * @brief This function configures the Cortex-M SysTick source of the time base. + * @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro) + * @note When a RTOS is used, it is recommended to avoid changing the SysTick + * configuration by calling this function, for a delay use rather osDelay RTOS service. + * @param Ticks Number of ticks + * @retval None + */ +__STATIC_INLINE void LL_InitTick(uint32_t HCLKFrequency, uint32_t Ticks) +{ + /* Configure the SysTick to have interrupt in 1ms time base */ + SysTick->LOAD = (uint32_t)((HCLKFrequency / Ticks) - 1UL); /* set reload register */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable the Systick Timer */ +} + +void LL_Init1msTick(uint32_t HCLKFrequency); +void LL_mDelay(uint32_t Delay); + +/** + * @} + */ + +/** @defgroup UTILS_EF_SYSTEM SYSTEM + * @{ + */ + +void LL_SetSystemCoreClock(uint32_t HCLKFrequency); +ErrorStatus LL_SetFlashLatency(uint32_t HCLK_Frequency); +ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, + LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); +ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass, + LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_LL_UTILS_H */ diff --git a/Middlewares/Makefile b/libs/st_usb/Makefile similarity index 73% rename from Middlewares/Makefile rename to libs/st_usb/Makefile index 68e667d..abaf316 100644 --- a/Middlewares/Makefile +++ b/libs/st_usb/Makefile @@ -1,7 +1,12 @@ -include ../Makefile.conf +include ../../Makefile.conf TARGET=libcmsis_usb.a +# Includes +CFLAGS+= -I. +CFLAGS+= -I../cmsis +CFLAGS+= -I../hal + SRC=$(wildcard *.c) OBJ=$(subst .c,.o,$(SRC)) DEPENDS=$(subst .c,.d,$(SRC)) diff --git a/Middlewares/usbd_cdc.c b/libs/st_usb/usbd_cdc.c similarity index 100% rename from Middlewares/usbd_cdc.c rename to libs/st_usb/usbd_cdc.c diff --git a/Middlewares/usbd_cdc.h b/libs/st_usb/usbd_cdc.h similarity index 100% rename from Middlewares/usbd_cdc.h rename to libs/st_usb/usbd_cdc.h diff --git a/libs/st_usb/usbd_conf.h b/libs/st_usb/usbd_conf.h new file mode 100644 index 0000000..fc1cef4 --- /dev/null +++ b/libs/st_usb/usbd_conf.h @@ -0,0 +1,70 @@ +#ifndef __USBD_CONF__H__ +#define __USBD_CONF__H__ + +#ifdef __cplusplus +extern "C" { +#endif + +#include +#include +#include +#include "stm32f4xx.h" +#include "stm32f4xx_hal.h" + +/*---------- -----------*/ +#define USBD_MAX_NUM_INTERFACES 1U +/*---------- -----------*/ +#define USBD_MAX_NUM_CONFIGURATION 1U +/*---------- -----------*/ +#define USBD_MAX_STR_DESC_SIZ 512U +/*---------- -----------*/ +#define USBD_DEBUG_LEVEL 0U +/*---------- -----------*/ +#define USBD_LPM_ENABLED 0U +/*---------- -----------*/ +#define USBD_SELF_POWERED 1U + +#define DEVICE_FS 0 +#define DEVICE_HS 1 + +#define USBD_malloc (void *)USBD_static_malloc +#define USBD_free USBD_static_free +#define USBD_memset memset +#define USBD_memcpy memcpy +#define USBD_Delay HAL_Delay + +#if (USBD_DEBUG_LEVEL > 0) + #define USBD_UsrLog(...) \ + printf(__VA_ARGS__); \ + printf("\n"); +#else + #define USBD_UsrLog(...) +#endif /* (USBD_DEBUG_LEVEL > 0U) */ + +#if (USBD_DEBUG_LEVEL > 1) + + #define USBD_ErrLog(...) \ + printf("ERROR: "); \ + printf(__VA_ARGS__); \ + printf("\n"); +#else + #define USBD_ErrLog(...) +#endif /* (USBD_DEBUG_LEVEL > 1U) */ + +#if (USBD_DEBUG_LEVEL > 2) + #define USBD_DbgLog(...) \ + printf("DEBUG : "); \ + printf(__VA_ARGS__); \ + printf("\n"); +#else + #define USBD_DbgLog(...) +#endif /* (USBD_DEBUG_LEVEL > 2U) */ + + void *USBD_static_malloc(uint32_t size); + void USBD_static_free(void *p); + +#ifdef __cplusplus +} +#endif + +#endif /* __USBD_CONF__H__ */ diff --git a/Middlewares/usbd_core.c b/libs/st_usb/usbd_core.c similarity index 100% rename from Middlewares/usbd_core.c rename to libs/st_usb/usbd_core.c diff --git a/Middlewares/usbd_core.h b/libs/st_usb/usbd_core.h similarity index 100% rename from Middlewares/usbd_core.h rename to libs/st_usb/usbd_core.h diff --git a/Middlewares/usbd_ctlreq.c b/libs/st_usb/usbd_ctlreq.c similarity index 100% rename from Middlewares/usbd_ctlreq.c rename to libs/st_usb/usbd_ctlreq.c diff --git a/Middlewares/usbd_ctlreq.h b/libs/st_usb/usbd_ctlreq.h similarity index 100% rename from Middlewares/usbd_ctlreq.h rename to libs/st_usb/usbd_ctlreq.h diff --git a/Middlewares/usbd_def.h b/libs/st_usb/usbd_def.h similarity index 100% rename from Middlewares/usbd_def.h rename to libs/st_usb/usbd_def.h diff --git a/Middlewares/usbd_ioreq.c b/libs/st_usb/usbd_ioreq.c similarity index 100% rename from Middlewares/usbd_ioreq.c rename to libs/st_usb/usbd_ioreq.c diff --git a/Middlewares/usbd_ioreq.h b/libs/st_usb/usbd_ioreq.h similarity index 100% rename from Middlewares/usbd_ioreq.h rename to libs/st_usb/usbd_ioreq.h diff --git a/src/Makefile b/src/Makefile index ba34408..49ec6ec 100644 --- a/src/Makefile +++ b/src/Makefile @@ -5,6 +5,19 @@ TARGET_ELF=$(TARGET).elf TARGET_HEX=$(TARGET).hex TARGET_BIN=$(TARGET).bin +# Includes +INC+= -I../libs/cmsis +INC+= -I../libs/hal +INC+= -I../libs/st_usb + +CFLAGS+=$(INC) +CXXFLAGS+=$(INC) + +# lib objects +LIB_OBJ+=$(wildcard ../libs/hal/*.o) +LIB_OBJ+=$(wildcard ../libs/st_usb/*.o) + + C_SRC=$(wildcard *.c) C_OBJ=$(subst .c,.o,$(C_SRC)) DEPENDS+=$(subst .c,.d,$(C_SRC)) @@ -22,8 +35,6 @@ LDFLAGS+= -T STM32F407VGTX_FLASH.ld OBJ=$(ASM_OBJ) $(C_OBJ) $(CXX_OBJ) -LIB1_OBJ=$(wildcard ../Drivers/*.o) -LIB2_OBJ=$(wildcard ../Middlewares/*.o) .PHONY: all clean @@ -36,7 +47,7 @@ $(TARGET_HEX): $(TARGET_ELF) $(OBJCOPY) -Oihex $^ $@ $(TARGET_ELF): $(OBJ) - $(LD) $(CXXFLAGS) $(LDFLAGS) $(LIB1_OBJ) $(LIB2_OBJ) $(OBJ) -o $(TARGET_ELF) + $(LD) $(CXXFLAGS) $(LDFLAGS) $(OBJ) $(LIB_OBJ) -o $(TARGET_ELF) %.os: %.s $(CC) $(CFLAGS) $(ASMFLAGS) -o $@ -c $^ diff --git a/stm32f4discovery.cfg b/stm32f4discovery.cfg deleted file mode 100644 index 714f1e9..0000000 --- a/stm32f4discovery.cfg +++ /dev/null @@ -1,15 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-or-later - -# This is an STM32F4 discovery board with a single STM32F407VGT6 chip. -# http://www.st.com/internet/evalboard/product/252419.jsp - -source [find interface/stlink.cfg] - -transport select hla_swd - -# increase working area to 64KB -set WORKAREASIZE 0x10000 - -source [find target/stm32f4x.cfg] - -reset_config srst_only